Using Bulk Operation
|
|
|
1 |
Choose Tools and select Bulk Operations. The Bulk Operations form opens.
|
2 |
Click Create. The Create Bulk Change (New) form opens.
-
Type the VLAN ID name.
-
Expand the Admin State drop-down menu and select Enable.
-
Expand the Object Type drop-down menu, expand the MPR tree, and select System Settings.
-
Click Next and on the Specify the Filter window, click Next.
-
Expand Attribute, then General, and then IP Data Plane Settings.
-
Double-click on L3 VLAN ID and enter the VLAN ID to be created. Click Next.
Note: VLAN ID should be the same across all the L3VPN nodes configured in the specified network or cluster.
-
Change review window displays the configured attributes along with the VLAN value.
-
Select the View newly created bulk change check box and click Close.
The Bulk Change (Edit) form opens.
|
3 |
Select the VLAN attribute you created and click Batch Control tab.
|
4 |
Click Generate Batches to generate the first set of 20 VLAN IDs, and click Execute.
|
5 |
Double-click on the Batch ID row to view the Batch Items.
|
Configure individually
|
|
|
6 |
In the navigation tree equipment view, right-click on a Wavence device object in the equipment tree and choose Properties. The Network Element (Edit) form opens.
|
7 |
Click System Setting tab and configure the L3 VLAN ID under the IP Data Plane Settings.
|
8 |
Click OK to save and close the form.
End of steps |