To change the WebCT password on one or more Wavence nodes using an NSP operation

Prerequisites

You can use an NSP Operation to change the WebCT password on one or more Wavence nodes. The operation artifacts required to perform this task on Wavence devices are included in the Wavence artifact package; this package can be acquired from the Nokia Support Portal or your Nokia support representative.

Steps
Deploying password policies
 
1 

Log in to the NSP and ensure that the nsp-ne-wavence-password-update and nsp-mpr-icm-intent-types artifact packages are installed. See the NSP Network Automation Guide for information about managing artifacts. If you have already configured and distributed password policies in the NFM-P, skip to Step 6.

2 

Click on the NSP Menu and select Device Management. In the Configuration Intent Types view, import the following intent type: icm-wavence-node-password-policy-management

3 

In the Configuration Templates view, create a configuration template for the intent you imported and click Release.

4 

In the Configuration Deployments view, create a deployment using the configuration template you created. Configure the parameters as required.

5 

Click Deploy to deploy the configuration template.

Assigning password policies to Wavence nodes
 
6 

In the Configuration Intent Types view, import the following intent type: icm-wavence-node-password-policy-assignment

7 

In the Configuration Templates view, create a configuration template for the intent you imported and click Release.

8 

In the Configuration Deployments view, create a deployment using the template you created. Select the Wavence NEs you need to modify as targets in the template, and select the password configuration template you deployed in Step 5 from the list of policies available in the template. If you are using a password policy that was configured and distributed using the NFM-P, enter the unique Policy ID for the NFM-P password policy.

9 

Click Deploy to deploy the configuration template. The password policy is assigned to the selected target NEs.

Performing an operation
 
10 

In the All Operations view, create an operation using the nsp-ne-wavence-password-update operation type.

11 

Configure the parameters as required, and select the same Wavence NEs you selected in Step 7 as targets of the operation.

12 

Start or schedule the operation. For information about configuring and scheduling operations, see the NSP Device Management Guide.

End of steps