Composite service

General information

The following workflow describes the sequence of high-level tasks required to configure a composite service with a microwave backhaul service on a Wavence, and a VPLS on a 7210 SAS or 7750 SR.

Note: If the 7750 SR is configured as the RPL owner in the ERP service, the corresponding RPL link is down.

If one of the backhaul adjacencies on the microwave backhaul service is down, the status of the microwave backhaul service is displayed as down in the service topology map, even though there is an alternate path.

Workflow to configure a composite service

1	Configure an Ethernet Radio ring on a Wavence. See To create an Ethernet radio ring on a Wavence.
2	Configure Ethernet CFM MD, MEG, NE MEG, and MEP. See “To configure an Ethernet CFM MD policy and subordinate objects” in the NSP NFM-P Classic Management User Guide.
3	Configure an Ethernet G.8032 ring on the 7210 SAS or the 7750 SR. See “To create an Ethernet G.8032 ring” in the NSP NFM-P Classic Management User Guide.
4	Configure a VPLS on 7210 SAS or 7750 SR. See “To create a VPLS” in the in the NSP NFM-P Classic Management User Guide.
5	Configure a microwave backhaul service on a Wavence. See Chapter 15, Wavence microwave backhaul service management.
6	Configure a composite service between the services created in Stage 4 and Stage 5. See To configure a composite service.