To retrieve RSL files stored by Wavence devices using the NFM-P
Prerequisites
RSL file retrieval is supported on MSS-E/HE/XE, UBT-NIM, and MSS-4/8 nodes release Wavence 23A or later.
Before you can retrieve RSL files from Wavence device, a File Retrieval Policy must be configured for the device. See To assign a file retrieval policy to a Wavence device in the NFM-P for information about assigning a policy, and To create or modify a file retrieval policy in the NFM-P for information about configuring a policy.
Note: Do not perform a file retrieval while a WebCT password reset is in progress.
Steps
1 |
Choose Administration→NE Maintenance→File Retrieval from the NFM-P main menu. The File Retrieval form opens. |
2 |
Select the RSL file retrieval policy configured for the device and click Properties. |
3 |
Confirm the parameters in the SFTP Settings panel. For RSL file retrieval from MSS-E/HE/XE and UBT-NIM nodes the host key fingerprint must be ED25519, and for CoreEvo nodes it must be ECDSA. |
4 |
Click on the File Retrieval Status tab. The supported Wavence devices that are managed by NFM-P are listed. |
5 |
Choose a device and click Retrieve Logs. The Log Retrieval State column displays the status of log retrieval. The RSL files are copied from the SFTP server to the NFM-P server. Retrieved RSL files are displayed in the Logs tab. Note: RSL files are stored on the NFM-P in /opt/nsp/nfmp/nelogs/Wavence/. Folders are created for each nodeID from which files were retrieved, containing a RSLFiles folder where the RSL files are located. End of steps |