Workflow to configure OSPFv2
Stages
Note: Segment Routing cannot be enabled if Static LSP or Label Maps are present on node and vice-versa.
1 |
Enable OSPF on a routing instance; see To configure OSPFv2 instance on a Routing instance . |
2 |
Create at least one OSPFv2; see To create an OSPF area . |
3 |
Assign Layer 3 interfaces to the routers in the OSPFv2 area; see To add a Layer 3 interface to an OSPF router . |
4 |
Configure LFA and remote LFA as required; see To enable LFA and remote LFA on an OSPF instance. |
5 |
Configure OSPF segment routing as required; see To configure OSPF segment routing and discover dynamic LSPs. |