To configure WRED QoS on a Wavence MSS

Note: You can enable WRED on UBT modules, and color mapping on an MSS-8, MSS-4, or UBT-SA device. When you configure radio queue settings, only select the UBT module which is online.

Steps
 

Enable WRED on the Wavence MSS device by performing the following:

  1. On the equipment tree, expand Network→Wavence.

  2. Right-click on the Wavence MSS object and choose Properties.

  3. Click on the QoS tab, enable the WRED Status parameter, and configure the Color Classification parameter. If required, configure Dot1p forwarding class mapping.

  4. Save and close the form.


On the equipment tree, expand Network→Wavence→Shelf→Card Slot→Port.


Right-click on the UBT port and choose Properties. The Physical Port (Edit) form opens.


Click on the Radio Queue tab, then select a queue and click on the Properties button. The QoS Radio Interface Queue Map (Edit) form opens.


Configure the parameters as required, then save and close the forms.

End of steps