Operation types provided by NSP
Default operation types
The NSP provides default operation types that allow you to perform backup, restore, upgrade, and audit operations. You can create additional operation types for use with your network. Default operation types are available for the nodes listed in the following table.
Node |
Note |
7750 SR |
— |
7950 XRS |
— |
7450 ESS |
— |
7220 IXR SRLinux |
— |
7250 IXR |
— |
7250 IXR SRLinux |
— |
MAG-c Appliance |
Supports backup, restore, upgrade, and audit operations with the following requirements:
-
A CLI mediation policy with a common username and password attached to both MAG-c Appliance NE and MAG-c NE
-
An FTP mediation policy attached to both MAG-c Appliance NE and MAG-c NE using REST
-
The MAG-c Appliance NE name must be unique in the NSP
-
For upgrade operations, the MAG-c Appliance NE must be Release 24.3 R1 or later.
-
When performing an upgrade operation, only select the active MAG-c Appliance NE as the target. |
7210 SAS and variants: Mxp, D, Dxp, K, M, X, T, R, E, S/Sx |
Classic mode only |
Wavence SM, SA, MSS-8/MSS-4 coreEvo |
Classic mode upgrade only |
Note: Audit operations can be performed on any node, provided the backup being audited was created using the nsp-ne-backup operation type.
Upgrade operation types
The NSP provides signed upgrade operation types for some NEs.
The following table describes the upgrade operations provided with NSP.
Operation name |
Description |
Supported NE types |
nsp-ne-upgrade-with-phases |
Operation for Multi-Phase Upgrade
The operation phases are:
-
Pre-checks for NE upgrade
-
Software image download to NE
-
Software image activation on NE
-
Reboot NE or perform CPM switchover to complete upgrade
Each phase is a workflow. |
SR OS NEs, including 7750 SR, 7950 XRS, 7450 ESS, 7250 IXR, 7705 SAR, and 7210 SAS
SR Linux NEs: 7220 IXR SRLinux, 7250 IXR SRLinux
Upgrade is available to versions for which node software images can be found on the support portal. |
nsp-ne-upgrade-eth-sat |
Operation for Ethernet Satellite Upgrade |
nsp-ne-wavence-upgrade |
Operation for Wavence NE Multi-Phase Upgrade |
Wavence NEs |
See the Device Management tutorials on the Network Developer Portal for information about working with Operations APIs.
Each operation calls one or more workflows. See the Workflows tutorial on the Network Developer Portal for information about updating workflows.
Important! Operation types and workflows provided with the NSP for NE upgrade are signed by Nokia. Signed artifacts cannot be modified. If you choose to manually clone, edit and re-deploy a signed artifact, the clone is not signed.