How do I bulk edit multiple deployments?
Purpose
You can edit up to ten deployments at one time. The following criteria must be met:
-
All deployments must have a compatible deployment status: saved, deployed aligned, or deployed misaligned.
Adding values to lists or tables
Some parameters, such as queues and forwarding classes in a QoS template, appear in list or table format in a configuration form. Existing table parameters can’t be displayed in the edit form, however, you can add them in the edit form.
Added values can be handled in the following ways:
-
Do Nothing: ignore all added table or list parameters and keep the existing values.
-
Append All: keep the existing values in the deployments and add the values that were added during editing.
If a value is added that already existed on a deployment, the new value will overwrite the old.
-
Replace All: replace the entire table on all deployments with the table of values added during editing. If no values are added, the tables are empty after the edit.
Example
Deployment 1 has no queues and no forwarding classes.
Deployment 2 has:
The deployments are edited. The edit operation includes adding the following:
The following table shows the results of the edit based on the chosen handling of added values.
Table 8-1: Results of bulk edit based on handling of added table values
Handling option |
Deployment 1 |
Deployment 2 |
---|---|---|
Do Nothing |
No queues, no forwarding classes |
|
Append All |
||
Replace All |