How do I configure historical alarm list settings?

Purpose

Configure logging and overflow settings for the historical alarm list. These settings apply to NSP, WS-NOC and MDM alarms. NFM-P alarm settings are configured in NFM-P; see the NFM-P Administrator Guide.

You must have administrator privileges to configure alarm settings.

Steps
 

In the Network Map And Health, Historical Alarms view, click the More button png5.png and select Settings. The Alarm Settings form opens, with the Historical Alarms panel displayed.


Enable the Archive Settings option and enable either or both of the Log on Change and Log on Deletion options.


Under Overflow Settings, specify the maximum alarm count at which an alarm overflow warning is issued.


Specify a warning threshold as a percentage of the maximum alarm count, and specify the percentage of the alarm count to be purged at the time of the warning message.


Specify a critical threshold as a percentage of the maximum alarm count, and specify the percentage of the alarm count to be purged at the time of the critical message.


Save your changes.

End of steps