How do I set Utilization map preferences?
Purpose
Use this procedure to configure the automatic refresh rate of the Utilization map, and to set threshold values for KPI indicator color changes.
Steps
1 |
Open Network Map and Health. |
2 |
|
3 |
In the Fault Management and Assurance Settings form, click Utilization Map Preferences. |
4 |
Configure the Refresh Rate parameter, which specifies the interval of automatic refreshes of the map. |
5 |
Under Port Speed Settings, set the Low and Medium port speed thresholds in Mbps. The threshold percentages specify the point at which a KPI indicator changes colour as a result of KPI change. |
6 |
Under Color Settings for Utilization Ranges, set the Low and Medium utilization threshold percentages. The threshold percentages specify the point at which a KPI indicator changes colour as a result of KPI change. |
7 |
Click Save to apply your changes. End of steps |