To respond to a GUI warning message

Steps
 

Perform an action.

A warning message dialog box opens. For example, when you configure a site password policy, at least one authentication order must be specified as the default in order to configure the authentication order parameters. If at least one authentication order is not configured, a warning message is displayed.


After you read the warning message, click OK. The warning message dialog box closes.


Correct the problem based on the information provided.


If you cannot correct the problem and continue to get the same warning message:

  1. Check the documentation to ensure that you are following the steps correctly.

  2. Verify that you are trying to perform an action that is supported.

  3. Review the general troubleshooting information in Checklist for identifying problems .

  4. If you cannot resolve the problem, collect the logs identified in To collect NFM-P log files before you contact your technical support representative.

End of steps