Workflow to manage device objects
Purpose
The following workflow describes the sequence of high-level tasks required to manage and configure device objects. This workflow assumes that the physical devices have been installed, commissioned, and discovered. See Chapter 8, Device commissioning and management for more information about device commissioning. See Chapter 9, Device discovery for more information about device discovery.
Note: Device objects can be accessed using the equipment navigation tree. See Chapter 3, NFM-P navigation tree for more information about using the equipment navigation tree.
Stages
1 |
As required, configure the following general NE capabilities:
|
2 |
As required, configure the following functionality on 7210 SAS NEs:
|
3 |
As required, configure the system resource profile on a 7250 IXR; see To configure the global system resource profile on a 7210 SAS or 7250 IXR. |
4 |
As required, configure the following functionality on 7705 SAR NEs:
|
5 |
As required, configure the following functionality on OmniSwitch NEs:
|
6 |
As required, configure ring group objects; see To create a ring group and To remove a device from a ring group or a ring group . |