|
General |
To configure the general parameters associated with the network interface. |
|
Port |
To create an association between the network interface and a physical port or channel. The system interface is not associated with a port. |
|
Policies |
To assign QoS policies, ingress or egress IP ACL filter policies, and accounting template policies to the network interface. |
|
Protocols |
To view a list of protocols that are enabled on the interface, and to apply protocols. |
|
Multicast |
To view a list of multicast protocols that are enabled on the interface, and to apply protocols. |
|
Security |
To assign a DoS protection policy or DDoS protection policy to a network interface. See
DoS protection on L3 network interfaces or
DDoS protection on network and access interfaces in this chapter for more information. |
|
BFD |
To configure BFD parameters to a network interface. |
|
Addresses |
To assign IP addresses, and subnet and broadcast address formats to a network interface.
To assign Track SRRP Instance to IP addresses, if required. |
|
ARP |
To configure or view ARP and proxy ARP parameters on the network interface. |
|
ICMP |
To configure ICMP parameters on the network interface. |
|
ICMPv6 |
To configure ICMPv6 parameters on the network interface if IPv6 is enabled. |
|
Neighbor Discovery |
To configure neighbor discovery and proxy neighbor discovery for static routes on the network interface. |
|
DHCP |
To configure DHCP Relay parameters or select a Python policy. |
|
Local DHCP |
To assign local DHCP servers to the network interface.
To associate a local DHCPv6 server, the IPv6 Allowed parameter must be enabled on the General tab. |
|
DHCP Client |
To enable DHCP and configure a DHCP client. |
|
Administrative Groups |
To assign administrative group policies to a network interface. See
To configure an administrative group policy to create an administrative group policy. |
|
Shared Risk Link Groups |
To assign shared risk link group policies to a network interface. See
To configure a Shared Risk Link Group policy to create a shared risk link group policy. |
|
Network Domain |
To add a network domain to a network interface. See
To create a network domain to create a network domain. |
|
VRRP |
To add a VRRP instance to an existing virtual router that assumes routing responsibilities from a failed router in a statically configured LAN. See
To create and configure a VRRP instance to create a VRRP instance. |
|
MEPs |
To add network interface facility MEPs to the network interface. Each network interface can support one facility MEP. |
|
Advertisement |
To configure router advertisement on the network interface. |
|
NTP |
To enable SNTP broadcasts on the network interface. |
|
RCA Result |
To view the results of RCA activities on the network interface. |
|
Zone |
To assign a 7705 SAR security zone policy to a network interface. See
To configure a security zone policy for a 7705 SAR to create a security zone policy. |
|
QoS |
To assign an egress network queue policy to a network interface. See
To configure a network queue policy or
To configure a 7210 and 1830 network queue policy to create a network queue policy. |
|
Deployment |
To monitor the deployment status of the interface such as any warnings when a configuration change is not fully deployed to an NE. |
|
Clear Statistics Status |
To view the status of all clear requests on the network interface. |
|
RP Statement Actions items |
To view the routing policy statement associated with the network interface. See
To configure a routing policy statement to create a routing policy statement. |
|
Statistics |
To view the statistics associated with the network interface. |
|
TCA |
To assign a TCA policy to a network interface. See
To configure a TCA policy to create a TCA policy. |
|
Faults |
To view alarms that are raised against the network interface, or related alarms that affect the network interface. |