perform commands

The perform commands are YANG-modeled versions of the tools perform commands and are available in MD-CLI and NETCONF interfaces. The perform commands execute actions in the router, such as:

force a LAG subgroup to become active
set an IS-IS overload condition
terminate a Python script

perform 
   —  card number 
      —  power-cycle 
   —  chassis reference chassis-number reference 
      —  check-backplane-eprom 
   —  filter 
      —  ip-filter reference 
         —  entry reference 
            —  activate-primary-action 
      —  ipv6-filter reference 
         —  entry reference 
            —  activate-primary-action 
      —  redirect-policy reference 
         —  activate-best-dest 
   —  lag 
      —  clear-force 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  force-active 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  force-standby 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  load-balance 
         —  class number
         —  [lag-name] reference
   —  log 
      —  custom-event 
         —  [event-number] number
         —  message-string string
         —  parameter1 string
         —  parameter2 string
         —  parameter3 string
         —  parameter4 string
         —  parameter5 string
         —  parameter6 string
         —  parameter7 string
         —  parameter8 string
         —  subject string
      —  test-event 
         —  custom-text string
   —  router string 
      —  isis reference 
         —  ldp-sync-exit 
         —  overload 
            —  max-metric boolean
            —  [seconds] number
         —  run-manual-spf 
      —  mcast-umh-red 
         —  show 
            —  pair 
               —  card number
               —  pair-id number
               —  summary 
      —  pim 
         —  mc-ecmp-rebalance 
            —  threshold number
         —  show 
            —  iom-failures 
               —  detail boolean
   —  system 
      —  script-control 
         —  script-policy 
            —  stop 
               —  all 
               —  owner reference
               —  policy-name reference
      —  security 
         —  secure-boot 
            —  show 
               —  uefi-variables 
                  —  card reference
      —  ssh 
         —  generate-keypair 
            —  ecdsa-curve keyword
            —  ed25519 
            —  rsa-key-size number
            —  [save-path] cflash-url

perform command descriptions

perform


	Synopsis	Perform troubleshooting and debugging
	Context	perform
	Tree	perform
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

card [slot-number] number


	Synopsis	Enter the card list instance
	Context	perform card number
	Tree	card
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[slot-number] number


	Synopsis	Card slot number
	Context	perform card number
	Tree	card
	Max. range	0 to 4294967295
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

power-cycle


	Synopsis	Force a power cycle of a card
	Context	perform card number power-cycle
	Tree	power-cycle
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

chassis [chassis-class] reference chassis-number reference


	Synopsis	Enter the chassis list instance
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[chassis-class] reference


	Synopsis	Physical chassis
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Reference	state chassis keyword chassis-number number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

chassis-number reference


	Synopsis	Unique index ID for the physical chassis
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Reference	state chassis keyword chassis-number number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

check-backplane-eprom


	Synopsis	Check chassis backplane EPROM
	Context	perform chassis reference chassis-number reference check-backplane-eprom
	Tree	check-backplane-eprom
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

filter


	Synopsis	Enter the filter context
	Context	perform filter
	Tree	filter
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ip-filter [filter-name] reference


	Synopsis	Enter the ip-filter list instance
	Context	perform filter ip-filter reference
	Tree	ip-filter
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[filter-name] reference


	Synopsis	Name to associate with the IP filter
	Context	perform filter ip-filter reference
	Tree	ip-filter
	Reference	state filter ip-filter filter-name
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

entry [entry-id] reference


	Synopsis	Enter the entry list instance
	Context	perform filter ip-filter reference entry reference
	Tree	entry
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[entry-id] reference


	Synopsis	ID for the IP filter entry
	Context	perform filter ip-filter reference entry reference
	Tree	entry
	Reference	state filter ip-filter filter-name entry number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

activate-primary-action


	Synopsis	Switch from the secondary to the primary action
	Context	perform filter ip-filter reference entry reference activate-primary-action
	Tree	activate-primary-action
	Description	This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ipv6-filter [filter-name] reference


	Synopsis	Enter the ipv6-filter list instance
	Context	perform filter ipv6-filter reference
	Tree	ipv6-filter
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[filter-name] reference


	Synopsis	Name to associate with the IPv6 filter
	Context	perform filter ipv6-filter reference
	Tree	ipv6-filter
	Reference	state filter ipv6-filter filter-name
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

entry [entry-id] reference


	Synopsis	Enter the entry list instance
	Context	perform filter ipv6-filter reference entry reference
	Tree	entry
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[entry-id] reference


	Synopsis	ID for the IPv6 filter entry
	Context	perform filter ipv6-filter reference entry reference
	Tree	entry
	Reference	state filter ipv6-filter filter-name entry number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

activate-primary-action


	Synopsis	Switch from the secondary to the primary action
	Context	perform filter ipv6-filter reference entry reference activate-primary-action
	Tree	activate-primary-action
	Description	This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

redirect-policy [redirect-policy-name] reference


	Synopsis	Enter the redirect-policy list instance
	Context	perform filter redirect-policy reference
	Tree	redirect-policy
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[redirect-policy-name] reference


	Synopsis	Name of the redirect policy
	Context	perform filter redirect-policy reference
	Tree	redirect-policy
	Reference	state filter redirect-policy named-item
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

activate-best-dest


	Synopsis	Activate the current best destination
	Context	perform filter redirect-policy reference activate-best-dest
	Tree	activate-best-dest
	Description	This command forces a PBR switch to the best destination selected by the redirect policy when that destination is not currently active as result of sticky destination functionality being enabled for the specified redirect policy. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

lag


	Synopsis	Perform LAG operations
	Context	perform lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

clear-force


	Synopsis	Perform LAG clear-force operation
	Context	perform lag clear-force
	Tree	clear-force
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag clear-force lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag clear-force lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag clear-force lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag clear-force multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag clear-force multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag clear-force multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag clear-force multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

force-active


	Synopsis	Perform LAG force-active operation
	Context	perform lag force-active
	Tree	force-active
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag force-active lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag force-active lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag force-active lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag force-active multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag force-active multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag force-active multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag force-active multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

force-standby


	Synopsis	Perform LAG force-standby operation
	Context	perform lag force-standby
	Tree	force-standby
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag force-standby lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag force-standby lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag force-standby lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag force-standby multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag force-standby multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag force-standby multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag force-standby multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

load-balance


	Synopsis	Perform LAG load-balance operation
	Context	perform lag load-balance
	Tree	load-balance
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

class number


	Synopsis	Class used for load balancing
	Context	perform lag load-balance class number
	Tree	class
	Range	1 to 3
	Default	1
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag load-balance [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

log


	Synopsis	Enter the log context
	Context	perform log
	Tree	log
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

custom-event


	Synopsis	Send a custom generic log event
	Context	perform log custom-event
	Tree	custom-event
	Description	When specified, the system sends a custom generic log event. The total length of the message string and all parameter strings must be less than or equal to 2400 characters.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[event-number] number


	Synopsis	Custom event to send
	Context	perform log custom-event [event-number] number
	Tree	[event-number]
	Range	1 to 6
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

message-string string


	Synopsis	Message for the log event
	Context	perform log custom-event message-string string
	Tree	message-string
	Description	This command specifies the string for the message field of the log event. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	1 to 2000
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter1 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter1 string
	Tree	parameter1
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter2 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter2 string
	Tree	parameter2
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter3 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter3 string
	Tree	parameter3
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter4 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter4 string
	Tree	parameter4
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter5 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter5 string
	Tree	parameter5
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter6 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter6 string
	Tree	parameter6
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter7 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter7 string
	Tree	parameter7
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

parameter8 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter8 string
	Tree	parameter8
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

subject string


	Synopsis	Subject of the log event
	Context	perform log custom-event subject string
	Tree	subject
	Description	This command specifies the string in the subject field of the log event. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	1 to 32
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

test-event


	Synopsis	Send a test log event
	Context	perform log test-event
	Tree	test-event
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

custom-text string


	Synopsis	Custom text of the test event message field
	Context	perform log test-event custom-text string
	Tree	custom-text
	Description	This command specifies custom text for the message section of the test log event. Embedded double quotes are not supported in the custom-text string. There is no special treatment for or \r sequences. For example, in the custom-text string is output as the backslash character (\) and "n" (the equivalent of ASCII 0x5C and 0x6e).
	String length	0 to 800
	Default
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

router [router-instance] string


	Synopsis	Enter the router list instance
	Context	perform router string
	Tree	router
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[router-instance] string


	Synopsis	Router name or VPRN service name
	Context	perform router string
	Tree	router
	MD-CLI default	Base
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

isis [isis-instance] reference


	Synopsis	Enter the isis list instance
	Context	perform router string isis reference
	Tree	isis
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[isis-instance] reference


	Synopsis	IS-IS instance
	Context	perform router string isis reference
	Tree	isis
	MD-CLI default	0
	Reference	state router named-item-64 isis number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ldp-sync-exit


	Synopsis	Terminate LDP synchronization and restore actual cost
	Context	perform router string isis reference ldp-sync-exit
	Tree	ldp-sync-exit
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

overload


	Synopsis	Perform IS-IS overload
	Context	perform router string isis reference overload
	Tree	overload
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

max-metric boolean


	Synopsis	Enable advertising max-metric values
	Context	perform router string isis reference overload max-metric boolean
	Tree	max-metric
	Default	false
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[seconds] number


	Synopsis	Overload duration
	Context	perform router string isis reference overload [seconds] number
	Tree	[seconds]
	Range	60 to 1800
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

run-manual-spf


	Synopsis	Run SPF algorithm
	Context	perform router string isis reference run-manual-spf
	Tree	run-manual-spf
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

mcast-umh-red


	Synopsis	Display Upstream Multi-Homing info
	Context	perform router string mcast-umh-red
	Tree	mcast-umh-red
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform router string mcast-umh-red show
	Tree	show
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

pair


	Synopsis	Enter the pair context
	Context	perform router string mcast-umh-red show pair
	Tree	pair
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

card number


	Synopsis	Slot number
	Context	perform router string mcast-umh-red show pair card number
	Tree	card
	Max. range	0 to 4294967295
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

pair-id number


	Synopsis	Pair ID
	Context	perform router string mcast-umh-red show pair pair-id number
	Tree	pair-id
	Range	1 to 1000
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

summary


	Synopsis	Summary
	Context	perform router string mcast-umh-red show pair summary
	Tree	summary
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

pim


	Synopsis	Enter the pim context
	Context	perform router string pim
	Tree	pim
	Description	Commands in this context enable tools to perform PIM tasks.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

mc-ecmp-rebalance


	Synopsis	Perform multicast ECMP rebalance
	Context	perform router string pim mc-ecmp-rebalance
	Tree	mc-ecmp-rebalance
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

threshold number


	Synopsis	ECMP preference level threshold
	Context	perform router string pim mc-ecmp-rebalance threshold number
	Tree	threshold
	Description	This command configures a threshold level to force a rebalance of all multicast streams with a priority of less than or equal to the specified value. Selecting the highest value forces the rebalance of all multicast streams.
	Range	1 to 7
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform router string pim show
	Tree	show
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

iom-failures


	Synopsis	Display IOM failures
	Context	perform router string pim show iom-failures
	Tree	iom-failures
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

detail boolean


	Synopsis	Display IOM failure details
	Context	perform router string pim show iom-failures detail boolean
	Tree	detail
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

system


	Synopsis	Enter the system context
	Context	perform system
	Tree	system
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

script-control


	Synopsis	Enter the script-control context
	Context	perform system script-control
	Tree	script-control
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

script-policy


	Synopsis	Enter the script-policy context
	Context	perform system script-control script-policy
	Tree	script-policy
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

stop


	Synopsis	Stop the execution of scripts
	Context	perform system script-control script-policy stop
	Tree	stop
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

all


	Synopsis	Stop script execution for all script policies
	Context	perform system script-control script-policy stop all
	Tree	all
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

owner reference


	Synopsis	Stop script execution for a specific owner
	Context	perform system script-control script-policy stop owner reference
	Tree	owner
	Default	TiMOS CLI
	Reference	state system script-control script-policy named-item owner named-item
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

policy-name reference


	Synopsis	Stop script execution for a specific policy
	Context	perform system script-control script-policy stop policy-name reference
	Tree	policy-name
	Reference	state system script-control script-policy named-item owner named-item
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

security


	Synopsis	Enter the security context
	Context	perform system security
	Tree	security
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

secure-boot


	Synopsis	Enter the secure-boot context
	Context	perform system security secure-boot
	Tree	secure-boot
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform system security secure-boot show
	Tree	show
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

uefi-variables


	Synopsis	Display secure-boot UEFI variables
	Context	perform system security secure-boot show uefi-variables
	Tree	uefi-variables
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

card reference


	Synopsis	CPM slot where UEFI variables are returned
	Context	perform system security secure-boot show uefi-variables card reference
	Tree	card
	Reference	state cpm cpm-card-slot
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ssh


	Synopsis	Perform SSH operations
	Context	perform system ssh
	Tree	ssh
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

generate-keypair


	Synopsis	Generate SSH authentication key pair
	Context	perform system ssh generate-keypair
	Tree	generate-keypair
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ecdsa-curve keyword


	Synopsis	Elliptic curve of the ECDSA key to be generated
	Context	perform system ssh generate-keypair ecdsa-curve keyword
	Tree	ecdsa-curve
	Options	secp256r1, secp384r1, secp521r1
	Default	secp256r1
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

ed25519


	Synopsis	Generate an ed25519 key
	Context	perform system ssh generate-keypair ed25519
	Tree	ed25519
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

rsa-key-size number


	Synopsis	Length in bits of the RSA key to be generated
	Context	perform system ssh generate-keypair rsa-key-size number
	Tree	rsa-key-size
	Range	2048 to 4096
	Default	3072
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2

[save-path] cflash-url


	Synopsis	Path to save the result key file
	Context	perform system ssh generate-keypair [save-path] cflash-url
	Tree	[save-path]
	String length	1 to 200
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	7705 SAR Gen 2