perform commands

The perform commands are YANG-modeled versions of the tools perform commands and are available in MD-CLI and NETCONF interfaces. The perform commands execute actions in the router, such as:

force a LAG subgroup to become active
set an IS-IS overload condition
terminate a Python script

perform 
   —  card number 
      —  power-cycle 
   —  chassis reference chassis-number reference 
      —  check-backplane-eprom 
   —  filter 
      —  ip-filter reference 
         —  entry reference 
            —  activate-primary-action 
      —  ipv6-filter reference 
         —  entry reference 
            —  activate-primary-action 
      —  redirect-policy reference 
         —  activate-best-dest 
   —  gnss 
      —  restart-position-survey 
         —  all 
         —  port 
            —  [port] reference
   —  lag 
      —  clear-force 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  force-active 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  force-standby 
         —  lag 
            —  [lag-name] reference
            —  sub-group number
         —  multi-chassis 
            —  all 
            —  peer 
               —  [ip-address] reference
      —  load-balance 
         —  class number
         —  [lag-name] reference
   —  log 
      —  custom-event 
         —  [event-number] number
         —  message-string string
         —  parameter1 string
         —  parameter2 string
         —  parameter3 string
         —  parameter4 string
         —  parameter5 string
         —  parameter6 string
         —  parameter7 string
         —  parameter8 string
         —  subject string
      —  test-event 
         —  custom-text string
   —  mda 
      —  card-slot reference 
         —  mda-slot reference 
            —  ptp-reset 
   —  pcap reference 
      —  capture 
         —  start 
            —  timestamp boolean
            —  url-suffix string
         —  stop 
   —  port reference 
      —  serial 
         —  rs232 
            —  socket reference 
               —  rx 
                  —  squelch-reset 
   —  python 
      —  python-script 
         —  protect 
            —  hmac-sha256-key string
            —  input-file string
            —  output-file string
         —  reload 
            —  script 
               —  [name] reference
   —  router string 
      —  isis reference 
         —  ldp-sync-exit 
         —  overload 
            —  max-metric boolean
            —  [seconds] number
         —  run-manual-spf 
      —  mcast-umh-red 
         —  show 
            —  pair 
               —  card number
               —  pair-id number
               —  summary 
      —  pim 
         —  mc-ecmp-rebalance 
            —  threshold number
         —  show 
            —  iom-failures 
               —  detail boolean
   —  service 
      —  cpipe reference 
         —  sap reference 
            —  cem 
               —  asym-delay-adjust 
      —  ies reference 
         —  ip-transport reference 
            —  remote-host reference 
               —  check-tcp 
      —  vprn reference 
         —  ip-transport reference 
            —  remote-host reference 
               —  check-tcp 
   —  system 
      —  grpc 
         —  custom-proto reference 
            —  reload 
      —  script-control 
         —  script-policy 
            —  stop 
               —  all 
               —  owner reference
               —  policy-name reference
      —  security 
         —  secure-boot 
            —  show 
               —  uefi-variables 
                  —  card reference
      —  ssh 
         —  generate-keypair 
            —  ecdsa-curve keyword
            —  ed25519 
            —  rsa-key-size number
            —  [save-path] cflash-url

perform command descriptions

perform


	Synopsis	Perform troubleshooting and debugging
	Context	perform
	Tree	perform
	Introduced	25.3.R2
	Platforms	SAR Gen 2

card [slot-number] number


	Synopsis	Enter the card list instance
	Context	perform card number
	Tree	card
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[slot-number] number


	Synopsis	Card slot number
	Context	perform card number
	Tree	card
	Max. range	0 to 4294967295
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

power-cycle


	Synopsis	Force a power cycle of a card
	Context	perform card number power-cycle
	Tree	power-cycle
	Introduced	25.3.R2
	Platforms	SAR Gen 2

chassis [chassis-class] reference chassis-number reference


	Synopsis	Enter the chassis list instance
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[chassis-class] reference


	Synopsis	Physical chassis
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Reference	state chassis keyword chassis-number number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

chassis-number reference


	Synopsis	Unique index ID for the physical chassis
	Context	perform chassis reference chassis-number reference
	Tree	chassis
	Reference	state chassis keyword chassis-number number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

check-backplane-eprom


	Synopsis	Check chassis backplane EPROM
	Context	perform chassis reference chassis-number reference check-backplane-eprom
	Tree	check-backplane-eprom
	Introduced	25.3.R2
	Platforms	SAR Gen 2

filter


	Synopsis	Enter the filter context
	Context	perform filter
	Tree	filter
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ip-filter [filter-name] reference


	Synopsis	Enter the ip-filter list instance
	Context	perform filter ip-filter reference
	Tree	ip-filter
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[filter-name] reference


	Synopsis	Name to associate with the IP filter
	Context	perform filter ip-filter reference
	Tree	ip-filter
	Reference	state filter ip-filter filter-name
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

entry [entry-id] reference


	Synopsis	Enter the entry list instance
	Context	perform filter ip-filter reference entry reference
	Tree	entry
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[entry-id] reference


	Synopsis	ID for the IP filter entry
	Context	perform filter ip-filter reference entry reference
	Tree	entry
	Reference	state filter ip-filter filter-name entry number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

activate-primary-action


	Synopsis	Switch from the secondary to the primary action
	Context	perform filter ip-filter reference entry reference activate-primary-action
	Tree	activate-primary-action
	Description	This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ipv6-filter [filter-name] reference


	Synopsis	Enter the ipv6-filter list instance
	Context	perform filter ipv6-filter reference
	Tree	ipv6-filter
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[filter-name] reference


	Synopsis	Name to associate with the IPv6 filter
	Context	perform filter ipv6-filter reference
	Tree	ipv6-filter
	Reference	state filter ipv6-filter filter-name
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

entry [entry-id] reference


	Synopsis	Enter the entry list instance
	Context	perform filter ipv6-filter reference entry reference
	Tree	entry
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[entry-id] reference


	Synopsis	ID for the IPv6 filter entry
	Context	perform filter ipv6-filter reference entry reference
	Tree	entry
	Reference	state filter ipv6-filter filter-name entry number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

activate-primary-action


	Synopsis	Switch from the secondary to the primary action
	Context	perform filter ipv6-filter reference entry reference activate-primary-action
	Tree	activate-primary-action
	Description	This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

redirect-policy [redirect-policy-name] reference


	Synopsis	Enter the redirect-policy list instance
	Context	perform filter redirect-policy reference
	Tree	redirect-policy
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[redirect-policy-name] reference


	Synopsis	Name of the redirect policy
	Context	perform filter redirect-policy reference
	Tree	redirect-policy
	Reference	state filter redirect-policy named-item
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

activate-best-dest


	Synopsis	Activate the current best destination
	Context	perform filter redirect-policy reference activate-best-dest
	Tree	activate-best-dest
	Description	This command forces a PBR switch to the best destination selected by the redirect policy when that destination is not currently active as result of sticky destination functionality being enabled for the specified redirect policy. If the configure filter redirect sticky-dest command is configured, the timer expires.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

gnss


	Synopsis	Enter the gnss context
	Context	perform gnss
	Tree	gnss
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

restart-position-survey


	Synopsis	Enter the restart-position-survey context
	Context	perform gnss restart-position-survey
	Tree	restart-position-survey
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

all


	Synopsis	Restart the GNSS position survey on all GNSS ports
	Context	perform gnss restart-position-survey all
	Tree	all
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

port


	Synopsis	Restart the position survey on the specified GNSS port
	Context	perform gnss restart-position-survey port
	Tree	port
	Description	This command performs a restart of the GNSS position survey on the specified GNSS port.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[port] reference


	Synopsis	GNSS port for the GNSS position survey
	Context	perform gnss restart-position-survey port [port] reference
	Tree	[port]
	Reference	state port port
	Notes	This element is mandatory.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

lag


	Synopsis	Enter the lag context
	Context	perform lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	SAR Gen 2

clear-force


	Synopsis	Enter the clear-force context
	Context	perform lag clear-force
	Tree	clear-force
	Introduced	25.3.R2
	Platforms	SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag clear-force lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag clear-force lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag clear-force lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag clear-force multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag clear-force multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag clear-force multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag clear-force multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

force-active


	Synopsis	Enter the force-active context
	Context	perform lag force-active
	Tree	force-active
	Introduced	25.3.R2
	Platforms	SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag force-active lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag force-active lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag force-active lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag force-active multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag force-active multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag force-active multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag force-active multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

force-standby


	Synopsis	Enter the force-standby context
	Context	perform lag force-standby
	Tree	force-standby
	Introduced	25.3.R2
	Platforms	SAR Gen 2

lag


	Synopsis	Perform LAG operation on the specified LAG
	Context	perform lag force-standby lag
	Tree	lag
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag force-standby lag [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

sub-group number


	Synopsis	Sub-group in the LAG
	Context	perform lag force-standby lag sub-group number
	Tree	sub-group
	Range	1 to 16
	Default	1
	Introduced	25.3.R2
	Platforms	SAR Gen 2

multi-chassis


	Synopsis	Enter the multi-chassis context
	Context	perform lag force-standby multi-chassis
	Tree	multi-chassis
	Introduced	25.3.R2
	Platforms	SAR Gen 2

all


	Synopsis	Perform LAG operation on all multi-chassis LAGs
	Context	perform lag force-standby multi-chassis all
	Tree	all
	Introduced	25.3.R2
	Platforms	SAR Gen 2

peer


	Synopsis	Perform LAG operation on the MC peer
	Context	perform lag force-standby multi-chassis peer
	Tree	peer
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[ip-address] reference


	Synopsis	Peer IP address
	Context	perform lag force-standby multi-chassis peer [ip-address] reference
	Tree	[ip-address]
	Reference	state redundancy multi-chassis peer (ipv4-address-no-zone \| ipv6-address-no-zone)
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

load-balance


	Synopsis	Perform LAG load-balance operation
	Context	perform lag load-balance
	Tree	load-balance
	Introduced	25.3.R2
	Platforms	SAR Gen 2

class number


	Synopsis	Class used for load balancing
	Context	perform lag load-balance class number
	Tree	class
	Range	1 to 3
	Default	1
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[lag-name] reference


	Synopsis	LAG name
	Context	perform lag load-balance [lag-name] reference
	Tree	[lag-name]
	Reference	state lag lag-interface
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

log


	Synopsis	Enter the log context
	Context	perform log
	Tree	log
	Introduced	25.3.R2
	Platforms	SAR Gen 2

custom-event


	Synopsis	Send a custom generic log event
	Context	perform log custom-event
	Tree	custom-event
	Description	When specified, the system sends a custom generic log event. The total length of the message string and all parameter strings must be less than or equal to 2400 characters.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[event-number] number


	Synopsis	Custom event to send
	Context	perform log custom-event [event-number] number
	Tree	[event-number]
	Range	1 to 6
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

message-string string


	Synopsis	Message for the log event
	Context	perform log custom-event message-string string
	Tree	message-string
	Description	This command specifies the string for the message field of the log event. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	1 to 2000
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter1 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter1 string
	Tree	parameter1
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter2 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter2 string
	Tree	parameter2
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter3 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter3 string
	Tree	parameter3
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter4 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter4 string
	Tree	parameter4
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter5 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter5 string
	Tree	parameter5
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter6 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter6 string
	Tree	parameter6
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter7 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter7 string
	Tree	parameter7
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

parameter8 string


	Synopsis	Custom text of the parameter
	Context	perform log custom-event parameter8 string
	Tree	parameter8
	Description	This command specifies the string for the parameter. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	0 to 2000
	Introduced	25.3.R2
	Platforms	SAR Gen 2

subject string


	Synopsis	Subject of the log event
	Context	perform log custom-event subject string
	Tree	subject
	Description	This command specifies the string in the subject field of the log event. Embedded double quotes are supported by using the backslash character (\) followed by the double quote character (").
	String length	1 to 32
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

test-event


	Synopsis	Send a test log event
	Context	perform log test-event
	Tree	test-event
	Introduced	25.3.R2
	Platforms	SAR Gen 2

custom-text string


	Synopsis	Custom text of the test event message field
	Context	perform log test-event custom-text string
	Tree	custom-text
	Description	This command specifies custom text for the message section of the test log event. Embedded double quotes are not supported in the custom-text string. There is no special treatment for or \r sequences. For example, in the custom-text string is output as the backslash character (\) and "n" (the equivalent of ASCII 0x5C and 0x6e).
	String length	0 to 800
	Introduced	25.3.R2
	Platforms	SAR Gen 2

mda


	Synopsis	Enter the mda context
	Context	perform mda
	Tree	mda
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

card-slot [slot-number] reference


	Synopsis	Enter the card-slot list instance
	Context	perform mda card-slot reference
	Tree	card-slot
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[slot-number] reference


	Synopsis	Card slot number
	Context	perform mda card-slot reference
	Tree	card-slot
	Reference	state card number
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

mda-slot [mda] reference


	Synopsis	Enter the mda-slot list instance
	Context	perform mda card-slot reference mda-slot reference
	Tree	mda-slot
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[mda] reference


	Synopsis	Card MDA slot
	Context	perform mda card-slot reference mda-slot reference
	Tree	mda-slot
	Reference	state card number mda number
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

ptp-reset


	Synopsis	Reset the PTP timing on the specified MDA
	Context	perform mda card-slot reference mda-slot reference ptp-reset
	Tree	ptp-reset
	Description	This command resets the PTP timing subsystem on the specified MDA. When a PTP timeReceiver port indicates abnormal or extreme values for the offsetFromMaster or the meanPathDelay, it may be because of the PTP timing subsystem of the MDA on the timeTransmitter or the timeReceiver. This command can be used to reinitialize the timing subsystem on an MDA without impacting traffic. Note: While this command can be used to remedy such a situation, Nokia recommends to first capture any relevant debug files for Nokia investigation.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

pcap [session-name] reference


	Synopsis	Enter the pcap list instance
	Context	perform pcap reference
	Tree	pcap
	Description	Commands in this context configure a PCAP instance used for packet capture.
	Introduced	25.7.R1
	Platforms	SAR Gen 2

[session-name] reference


	Synopsis	PCAP session name for the packet capture
	Context	perform pcap reference
	Tree	pcap
	Reference	state mirror mirror-dest service-name pcap named-item
	Notes	This element is part of a list key.
	Introduced	25.7.R1
	Platforms	SAR Gen 2

capture


	Synopsis	Enter the capture context
	Context	perform pcap reference capture
	Tree	capture
	Description	Commands in this context configure the packet capture process for a specified PCAP session.
	Introduced	25.7.R1
	Platforms	SAR Gen 2

start


	Synopsis	Start PCAP capture
	Context	perform pcap reference capture start
	Tree	start
	Description	When specified, the system starts the packet capture process and also starts the FTP or TFTP session. If the FTP or TFTP server is unreachable, the command prompt rejects further input until the retry mechanism times out after 24 seconds (four attempts of about six seconds each). If the filename (configured using the configure mirror mirror-dest pcap command) is unchanged between captures, this command overwrites the file content. To avoid this, configure the url-suffix option, the timestamp option, or both, to create a new filename when starting a capture.
	Introduced	25.7.R1
	Platforms	SAR Gen 2

timestamp boolean


	Synopsis	Add a timestamp to the PCAP capture filename
	Context	perform pcap reference capture start timestamp boolean
	Tree	timestamp
	Default	false
	Introduced	25.7.R1
	Platforms	SAR Gen 2

url-suffix string


	Synopsis	pcap capture file-url suffix string.
	Context	perform pcap reference capture start url-suffix string
	Tree	url-suffix
	String length	1 to 19
	Introduced	25.7.R1
	Platforms	SAR Gen 2

stop


	Synopsis	Stop PCAP capture
	Context	perform pcap reference capture stop
	Tree	stop
	Description	When specified, the system stops the packet capture process and also stops the FTP or TFTP session. If the FTP or TFTP server is unreachable, the command prompt rejects further input until the retry mechanism times out after 24 seconds (four attempts of about six seconds each).
	Introduced	25.7.R1
	Platforms	SAR Gen 2

port [port-id] reference


	Synopsis	Enter the port list instance
	Context	perform port reference
	Tree	port
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[port-id] reference


	Synopsis	The port identifier
	Context	perform port reference
	Tree	port
	Reference	state port port
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

serial


	Synopsis	Enter the serial context
	Context	perform port reference serial
	Tree	serial
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

rs232


	Synopsis	Enter the rs232 context
	Context	perform port reference serial rs232
	Tree	rs232
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

socket [socket-id] reference


	Synopsis	Enter the socket list instance
	Context	perform port reference serial rs232 socket reference
	Tree	socket
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[socket-id] reference


	Synopsis	The socket identifier
	Context	perform port reference serial rs232 socket reference
	Tree	socket
	Reference	state port port serial rs232 socket number
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

rx


	Synopsis	Enter the rx context
	Context	perform port reference serial rs232 socket reference rx
	Tree	rx
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

squelch-reset


	Synopsis	Reset squelch
	Context	perform port reference serial rs232 socket reference rx squelch-reset
	Tree	squelch-reset
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

python


	Synopsis	Enter the python context
	Context	perform python
	Tree	python
	Introduced	26.7.R1
	Platforms	SAR Gen 2

python-script


	Synopsis	Enter the python-script context
	Context	perform python python-script
	Tree	python-script
	Introduced	26.7.R1
	Platforms	SAR Gen 2

protect


	Synopsis	Convert a Python file into a protected SRPY format
	Context	perform python python-script protect
	Tree	protect
	Description	When invoked, the system converts a normal (unprotected) Python script file into a protected SRPY format using a specified key.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

hmac-sha256-key string


	Synopsis	Key used to compute the hash
	Context	perform python python-script protect hmac-sha256-key string
	Tree	hmac-sha256-key
	String length	1 to 128
	Notes	This element is mandatory.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

input-file string


	Synopsis	URL of the input unprotected script file
	Context	perform python python-script protect input-file string
	Tree	input-file
	String length	1 to 180
	Notes	This element is mandatory.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

output-file string


	Synopsis	URL of the output protected script file
	Context	perform python python-script protect output-file string
	Tree	output-file
	String length	1 to 180
	Notes	This element is mandatory.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

reload


	Synopsis	Enter the reload context
	Context	perform python python-script reload
	Tree	reload
	Description	Commands in this context reload and recompile the primary, secondary, and tertiary scripts in the specified Python scripts, in that order. The system uses the first script that comes up. Executing these commands may update the last modified time for the system configuration.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

script


	Synopsis	Reload and recompile the specified script
	Context	perform python python-script reload script
	Tree	script
	Introduced	26.7.R1
	Platforms	SAR Gen 2

[name] reference


	Synopsis	Name of the python script to reload
	Context	perform python python-script reload script [name] reference
	Tree	[name]
	Reference	state python python-script named-item
	Notes	This element is mandatory.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

router [router-instance] string


	Synopsis	Enter the router list instance
	Context	perform router string
	Tree	router
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[router-instance] string


	Synopsis	Router name or VPRN service name
	Context	perform router string
	Tree	router
	MD-CLI default	Base
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

isis [isis-instance] reference


	Synopsis	Enter the isis list instance
	Context	perform router string isis reference
	Tree	isis
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[isis-instance] reference


	Synopsis	IS-IS instance
	Context	perform router string isis reference
	Tree	isis
	MD-CLI default	0
	Reference	state router named-item-64 isis number
	Notes	This element is part of a list key.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ldp-sync-exit


	Synopsis	Terminate LDP synchronization and restore actual cost
	Context	perform router string isis reference ldp-sync-exit
	Tree	ldp-sync-exit
	Introduced	25.3.R2
	Platforms	SAR Gen 2

overload


	Synopsis	Perform IS-IS overload
	Context	perform router string isis reference overload
	Tree	overload
	Introduced	25.3.R2
	Platforms	SAR Gen 2

max-metric boolean


	Synopsis	Enable advertising max-metric values
	Context	perform router string isis reference overload max-metric boolean
	Tree	max-metric
	Default	false
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[seconds] number


	Synopsis	Overload duration
	Context	perform router string isis reference overload [seconds] number
	Tree	[seconds]
	Range	60 to 1800
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

run-manual-spf


	Synopsis	Run SPF algorithm
	Context	perform router string isis reference run-manual-spf
	Tree	run-manual-spf
	Introduced	25.3.R2
	Platforms	SAR Gen 2

mcast-umh-red


	Synopsis	Enter the mcast-umh-red context
	Context	perform router string mcast-umh-red
	Tree	mcast-umh-red
	Introduced	25.3.R2
	Platforms	SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform router string mcast-umh-red show
	Tree	show
	Introduced	25.3.R2
	Platforms	SAR Gen 2

pair


	Synopsis	Enter the pair context
	Context	perform router string mcast-umh-red show pair
	Tree	pair
	Introduced	25.3.R2
	Platforms	SAR Gen 2

card number


	Synopsis	Slot number
	Context	perform router string mcast-umh-red show pair card number
	Tree	card
	Max. range	0 to 4294967295
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

pair-id number


	Synopsis	Pair ID
	Context	perform router string mcast-umh-red show pair pair-id number
	Tree	pair-id
	Range	1 to 1000
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

summary


	Synopsis	Summary
	Context	perform router string mcast-umh-red show pair summary
	Tree	summary
	Notes	The following elements are part of a choice: card, pair-id, or summary.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

pim


	Synopsis	Enter the pim context
	Context	perform router string pim
	Tree	pim
	Description	Commands in this context enable tools to perform PIM tasks.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

mc-ecmp-rebalance


	Synopsis	Perform multicast ECMP rebalance
	Context	perform router string pim mc-ecmp-rebalance
	Tree	mc-ecmp-rebalance
	Introduced	25.3.R2
	Platforms	SAR Gen 2

threshold number


	Synopsis	ECMP preference level threshold
	Context	perform router string pim mc-ecmp-rebalance threshold number
	Tree	threshold
	Description	This command configures a threshold level to force a rebalance of all multicast streams with a priority of less than or equal to the specified value. Selecting the highest value forces the rebalance of all multicast streams.
	Range	1 to 7
	Introduced	25.3.R2
	Platforms	SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform router string pim show
	Tree	show
	Introduced	25.3.R2
	Platforms	SAR Gen 2

iom-failures


	Synopsis	Display IOM failures
	Context	perform router string pim show iom-failures
	Tree	iom-failures
	Introduced	25.3.R2
	Platforms	SAR Gen 2

detail boolean


	Synopsis	Display IOM failure details
	Context	perform router string pim show iom-failures detail boolean
	Tree	detail
	Introduced	25.3.R2
	Platforms	SAR Gen 2

service


	Synopsis	Enter the service context
	Context	perform service
	Tree	service
	Introduced	25.10.R1
	Platforms	SAR Gen 2

cpipe [service-name] reference


	Synopsis	Enter the cpipe list instance
	Context	perform service cpipe reference
	Tree	cpipe
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[service-name] reference


	Synopsis	Name of Cpipe service to perform actions on
	Context	perform service cpipe reference
	Tree	cpipe
	Reference	state service cpipe service-name
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

sap [sap-id] reference


	Synopsis	Enter the sap list instance
	Context	perform service cpipe reference sap reference
	Tree	sap
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[sap-id] reference


	Synopsis	SAP ID
	Context	perform service cpipe reference sap reference
	Tree	sap
	Reference	state service cpipe service-name sap sap
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

cem


	Synopsis	Enter the cem context
	Context	perform service cpipe reference sap reference cem
	Tree	cem
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

asym-delay-adjust


	Synopsis	Perform asym-delay-adjustment action
	Context	perform service cpipe reference sap reference cem asym-delay-adjust
	Tree	asym-delay-adjust
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

ies [service-name] reference


	Synopsis	Enter the ies list instance
	Context	perform service ies reference
	Tree	ies
	Introduced	25.10.R1
	Platforms	SAR Gen 2

[service-name] reference


	Synopsis	IES service to perform actions on
	Context	perform service ies reference
	Tree	ies
	Reference	state service ies service-name
	Notes	This element is part of a list key.
	Introduced	25.10.R1
	Platforms	SAR Gen 2

ip-transport [ipt-id] reference


	Synopsis	Enter the ip-transport list instance
	Context	perform service ies reference ip-transport reference
	Tree	ip-transport
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[ipt-id] reference


	Synopsis	The id of the ip-transport to perform actions on
	Context	perform service ies reference ip-transport reference
	Tree	ip-transport
	Reference	state service ies service-name ip-transport port
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

remote-host [remote-host-id] reference


	Synopsis	Enter the remote-host list instance
	Context	perform service ies reference ip-transport reference remote-host reference
	Tree	remote-host
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[remote-host-id] reference


	Synopsis	The id of the remote-host to perform actions on
	Context	perform service ies reference ip-transport reference remote-host reference
	Tree	remote-host
	Reference	state service ies service-name ip-transport port remote-host number
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

check-tcp


	Synopsis	Initiate a check TCP connection test.
	Context	perform service ies reference ip-transport reference remote-host reference check-tcp
	Tree	check-tcp
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

vprn [service-name] reference


	Synopsis	Enter the vprn list instance
	Context	perform service vprn reference
	Tree	vprn
	Introduced	25.10.R1
	Platforms	SAR Gen 2

[service-name] reference


	Synopsis	VPRN service to perform actions on
	Context	perform service vprn reference
	Tree	vprn
	Reference	state service vprn service-name
	Notes	This element is part of a list key.
	Introduced	25.10.R1
	Platforms	SAR Gen 2

ip-transport [ipt-id] reference


	Synopsis	Enter the ip-transport list instance
	Context	perform service vprn reference ip-transport reference
	Tree	ip-transport
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[ipt-id] reference


	Synopsis	The id of the ip-transport to perform actions on
	Context	perform service vprn reference ip-transport reference
	Tree	ip-transport
	Reference	state service vprn service-name ip-transport port
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

remote-host [remote-host-id] reference


	Synopsis	Enter the remote-host list instance
	Context	perform service vprn reference ip-transport reference remote-host reference
	Tree	remote-host
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

[remote-host-id] reference


	Synopsis	The id of the remote-host to perform actions on
	Context	perform service vprn reference ip-transport reference remote-host reference
	Tree	remote-host
	Reference	state service vprn service-name ip-transport port remote-host number
	Notes	This element is part of a list key.
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

check-tcp


	Synopsis	Initiate a check TCP connection test.
	Context	perform service vprn reference ip-transport reference remote-host reference check-tcp
	Tree	check-tcp
	Introduced	26.3.R1
	Platforms	7705 SAR-Hx, 7705 SAR-Mx

system


	Synopsis	Enter the system context
	Context	perform system
	Tree	system
	Introduced	25.3.R2
	Platforms	SAR Gen 2

grpc


	Synopsis	Enter the grpc context
	Context	perform system grpc
	Tree	grpc
	Introduced	26.7.R1
	Platforms	SAR Gen 2

custom-proto [name] reference


	Synopsis	Enter the custom-proto list instance
	Context	perform system grpc custom-proto reference
	Tree	custom-proto
	Introduced	26.7.R1
	Platforms	SAR Gen 2

[name] reference


	Synopsis	Customized proto name
	Context	perform system grpc custom-proto reference
	Tree	custom-proto
	Reference	state system grpc custom-proto named-item
	Notes	This element is part of a list key.
	Introduced	26.7.R1
	Platforms	SAR Gen 2

reload


	Synopsis	Reload customized proto file
	Context	perform system grpc custom-proto reference reload
	Tree	reload
	Introduced	26.7.R1
	Platforms	SAR Gen 2

script-control


	Synopsis	Enter the script-control context
	Context	perform system script-control
	Tree	script-control
	Introduced	25.3.R2
	Platforms	SAR Gen 2

script-policy


	Synopsis	Enter the script-policy context
	Context	perform system script-control script-policy
	Tree	script-policy
	Introduced	25.3.R2
	Platforms	SAR Gen 2

stop


	Synopsis	Stop the execution of scripts
	Context	perform system script-control script-policy stop
	Tree	stop
	Introduced	25.3.R2
	Platforms	SAR Gen 2

all


	Synopsis	Stop script execution for all script policies
	Context	perform system script-control script-policy stop all
	Tree	all
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	SAR Gen 2

owner reference


	Synopsis	Stop script execution for a specific owner
	Context	perform system script-control script-policy stop owner reference
	Tree	owner
	Default	TiMOS CLI
	Reference	state system script-control script-policy named-item owner named-item
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	SAR Gen 2

policy-name reference


	Synopsis	Stop script execution for a specific policy
	Context	perform system script-control script-policy stop policy-name reference
	Tree	policy-name
	Reference	state system script-control script-policy named-item owner named-item
	Notes	The following elements are part of a mandatory choice: all or (owner and policy-name).
	Introduced	25.3.R2
	Platforms	SAR Gen 2

security


	Synopsis	Enter the security context
	Context	perform system security
	Tree	security
	Introduced	25.3.R2
	Platforms	SAR Gen 2

secure-boot


	Synopsis	Enter the secure-boot context
	Context	perform system security secure-boot
	Tree	secure-boot
	Introduced	25.3.R2
	Platforms	SAR Gen 2

show


	Synopsis	Enter the show context
	Context	perform system security secure-boot show
	Tree	show
	Introduced	25.3.R2
	Platforms	SAR Gen 2

uefi-variables


	Synopsis	Display secure-boot UEFI variables
	Context	perform system security secure-boot show uefi-variables
	Tree	uefi-variables
	Introduced	25.3.R2
	Platforms	SAR Gen 2

card reference


	Synopsis	CPM slot where UEFI variables are returned
	Context	perform system security secure-boot show uefi-variables card reference
	Tree	card
	Reference	state cpm cpm-card-slot
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ssh


	Synopsis	Enter the ssh context
	Context	perform system ssh
	Tree	ssh
	Introduced	25.3.R2
	Platforms	SAR Gen 2

generate-keypair


	Synopsis	Generate SSH authentication key pair
	Context	perform system ssh generate-keypair
	Tree	generate-keypair
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ecdsa-curve keyword


	Synopsis	Elliptic curve of the ECDSA key to be generated
	Context	perform system ssh generate-keypair ecdsa-curve keyword
	Tree	ecdsa-curve
	Options	secp256r1, secp384r1, secp521r1
	Default	secp256r1
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

ed25519


	Synopsis	Generate an ed25519 key
	Context	perform system ssh generate-keypair ed25519
	Tree	ed25519
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

rsa-key-size number


	Synopsis	Length in bits of the RSA key to be generated
	Context	perform system ssh generate-keypair rsa-key-size number
	Tree	rsa-key-size
	Range	2048 to 4096
	Default	3072
	Notes	The following elements are part of a mandatory choice: ecdsa-curve, ed25519, or rsa-key-size.
	Introduced	25.3.R2
	Platforms	SAR Gen 2

[save-path] cflash-url


	Synopsis	Path to save the result key file
	Context	perform system ssh generate-keypair [save-path] cflash-url
	Tree	[save-path]
	String length	1 to 200
	String format	'cflash-url' must start with cf1-4, optional slot A-D, then path (e.g. cf1:/path or cf1-A:/path) 'cflash-url' must have each path segment at most 99 characters
	Notes	This element is mandatory.
	Introduced	25.3.R2
	Platforms	SAR Gen 2