Operate and maintain
Documents under this category provide functional descriptions and procedures for configuring, operating, and maintaining 7705 SAR software.
- Basic System Configuration Guide
  This guide provides an overview of the CLI and describes 7705 SAR boot options file (BOF) configuration, file system management, and basic system management such as node timing and synchronization.
- Interface Guide
  This guide describes the functionality of the 7705 SAR cards, modules, and ports and how to configure these components.
- MPLS Guide
  This guide describes how to configure MPLS, RSVP-TE, PCEP, and LDP protocols on the 7705 SAR.
- Quality of Service Guide
  This guide describes the Quality of Service (QoS) functionality provided by the 7705 SAR and how to configure and implement QoS on the router.
- Router Configuration Guide
  This guide describes how to configure logical IP routing interfaces, VRRP filtering, routing policies, and the cflowd tool on the 7705 SAR.
- Routing Protocols Guide
  This guide describes how to configure unicast routing protocols (OSFP, IS-IS, BGP, RIP) and multicast routing protocols (IGMP, MLD, PIM, MSDP) supported on the 7705 SAR.
- Services Guide
  This guide describes how to configure service parameters such as service access points (SAPs) and service destination points (SDPs), Layer 2 and Layer 3 services, security functions (IPSec), and encryption functions (NGE) on the 7705 SAR.
- System Management Guide
  This guide describes how to configure system security and access features, SNMP functionality, and event and accounting logs on the 7705 SAR.

7705 SAR System Management Configuration Process

Configuration Process lists the tasks that are required to configure system security and access functions as well as event and accounting logs.

Each chapter in this book is presented in an overall logical configuration flow. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 1. Configuration Process
Area	Task/Description	Chapter
System security	Configure system security parameters, such as authentication, authorization, and accounting	Security
Network management	Configure SNMP elements	SNMP
Operational functions	Configure event and accounting logs	Event and Accounting Logs
Reference	List of security and telecom standards, supported protocols, and proprietary MIBs	Supported standards and protocols

April 24, 2024