Common CLI command descriptions

In this chapter

This section provides information about common Command Line Interface (CLI) syntax and command usage.

Common service commands

SAP syntax

sap
Syntax

[no] sap sap-id

Context

Description

This command specifies the physical port identifier portion of the SAP definition.

Parameters
sap-id

Specifies the physical port identifier portion of the SAP definition.

The sap-id can be configured in one of the formats listed in the following table.

Table 1. SAP-ID formats

Type

Syntax

Example

port-id

slot/mda/port[.channel]

1/1/5

null

[port-id | lag-id]

port-id: 1/1/3

lag-id: lag-3

dot1q

[port-id | lag-id]:qtag1

port-id:qtag1: 1/1/3:100

lag-id:qtag1:lag-3:102

cp.conn-prof-id: 1/2/1:cp.2

qinq

[port-id | lag-id]:qtag1.qtag2

port-id:qtag1.qtag2: 1/1/3:100.10

lag-id:qtag1.qtag2: lag-10:

The values depend on the encapsulation type configured for the interface. The following table describes the allowed values for the port and encapsulation types.

Table 2. Encapsulation types

Port type

Encap-type

Allowed values

Comments

Ethernet

null

0

The SAP is identified by the port.

Ethernet

dot1q

0 to 4094

The SAP is identified by the 802.1Q tag on the port.

Ethernet

QinQ

qtag1: 0 to 4094

qtag2: 0 to 4094

The SAP is identified by two 802.1Q tags on the port.

Notes:

  1. A 0 qtag1 value also accepts untagged packets on the dot1q port.

  2. A 0 qtag1 value is allowed with some 7210 SAS platforms. See Configuration guidelines for 7210 SAS-D and 7210 SAS-Dxp and Configuration guidelines for 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C for information about platforms and frame processing.

  3. A 0 qtag2 value is allowed only on 7210 SAS-K platforms as described in Configuration guidelines for 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C.