System management
Documents under this category provide information about configuring basic system functions and components on 7210 SAS-series routers, including system and interface configuration.
- 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Basic System Configuration Guide
  This guide describes file system management, boot option file (BOF) configuration, basic system management configuration, node timing, and synchronization functions on the 7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C platforms.
- 7210 SAS-Mxp, R6, R12, S, Sx, T Basic System Configuration Guide
  This guide describes file system management, boot option file (BOF) configuration, basic system management configuration, node timing, and synchronization functions on the 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-T platforms.
- 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Interface Configuration Guide
  This guide describes how to provision Input/Output Modules (IOMs), XMA Control Modules (XCMs), Media Dependent Adapters (MDAs), XRS Media Adapters (XMAs), connectors, and ports on the 7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C platforms.
- 7210 SAS-Mxp, R6, R12, S, Sx, T Interface Configuration Guide
  This guide describes how to provision Input/Output Modules (IOMs), XMA Control Modules (XCMs), Media Dependent Adapters (MDAs), XRS Media Adapters (XMAs), connectors, and ports on the 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-T platforms.
- 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C Router Configuration Guide
  This guide describes logical IP routing interfaces and associated attributes such as IP addresses, as well as IP and MAC-based filtering, Virtual Router Redundancy Protocol (VRRP), and cflowd on the 7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C platforms.
- 7210 SAS-Mxp, R6, R12, S, Sx, T Router Configuration Guide
  This guide describes logical IP routing interfaces and associated attributes such as IP addresses, as well as IP and MAC-based filtering, Virtual Router Redundancy Protocol (VRRP), and cflowd on the 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-T platforms.
- 7210 SAS-D, Dxp, K 2F1C2T, K 2F6C4T, K 3SFP+ 8C System Management Guide
  This guide describes system security features, SNMP and NETCONF features, and event and accounting logs; the guide also covers basic tasks such as configuring management access filters, passwords, and user profiles on the 7210 SAS-D, 7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C platforms.
- 7210 SAS-Mxp, R6, R12, S, Sx, T System Management Guide
  This guide describes system security features, SNMP and NETCONF features, and event and accounting logs; the guide also covers basic tasks such as configuring management access filters, passwords, and user profiles on the 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and 7210 SAS-T platforms.

Common CLI command descriptions

This section provides information about Command Line Interface (CLI) syntax and command usage for common service commands.

SAP commands

SAP command description

sap

Syntax

[no] sap sap-id

Context

Various

Platforms

Supported on all 7210 SAS platforms as described in this document

Description

This command specifies the physical port identifier portion of the SAP definition.

Parameters

sap-id

Specifies the physical port identifier portion of the SAP definition.

Values: The sap-id can be configured in one of the formats shown in the following table.

Table 1. Formats of sap-id
Type	Syntax	Example
port-id	slot/mda/port[.channel]	1/1/5
null	[port-id \| lag-id]	port-id: 1/1/3 lag-id: lag-3
dot1q	[port-id \| lag-id]:qtag1	port-id:qtag1: 1/1/3:100 lag-id:lag-1:102
qinq	[port-id \| lag-id]:qtag1.qtag2	port-id:qtag1.qtag2: 1/1/3:100.10 lag-id:qtag1.qtag2:lag-10:

qtag1, qtag2

Specifies the encapsulation value used to identify the SAP on the port or sub-port. If this parameter is not specifically defined, the default value is 0.

Values

qtag1: * | 0 to 4094

qtag2: * | 0 to 4094

The values depends on the encapsulation type configured for the interface. The following table describes the allowed values for the port and encapsulation types.

Table 2. Port and encapsulation types
Port type	Encap-type	Allowed values	Comments
Ethernet	Null	0	The SAP is identified by the port.
Ethernet	Dot1q	0 to 4094	The SAP is identified by the 802.1Q tag on the port. Note that a 0 qtag1 value also accepts untagged packets on the dot1q port.
Ethernet	QinQ	qtag1: 0 to 4094 qtag2: 0 to 4094	The SAP is identified by two 802.1Q tags on the port. Note that a 0 qtag1 value also accepts untagged packets on the Dot1q port.

October 6, 2023