admin commands

admin commands are used to perform administrative functions, such as displaying configuration that is not subject to AAA, manually saving the configuration, clearing user sessions, and rebooting the system.

admin 
   —  application-assurance 
      —  group reference 
         —  url-list reference 
            —  upgrade 
      —  upgrade 
   —  clear 
      —  security 
         —  lockout 
            —  all 
            —  user string
         —  password-history 
            —  all 
            —  user string
   —  disconnect 
      —  address (ipv4-address-no-zone | ipv6-address-no-zone)
      —  op-table-bypass boolean
      —  session-id number
      —  session-type keyword
      —  username string
   —  nat 
      —  save-deterministic-script 
   —  reboot 
      —  [card] keyword
      —  hold 
      —  now 
   —  redundancy 
      —  force-switchover 
         —  ignore-status 
         —  now 
      —  synchronize 
         —  boot-environment 
         —  configuration 
   —  satellite 
      —  ethernet-satellite reference 
         —  reboot 
            —  now 
            —  upgrade 
         —  synchronize 
         —  tech-support 
            —  [url] string
   —  save 
      —  bof 
      —  configure 
      —  debug 
      —  li 
      —  [url] string
   —  set 
      —  time 
         —  [system-time] string
   —  show 
      —  configuration 
         —  bof 
         —  booted 
         —  cflash-id string
         —  [cli-path] string
         —  configure 
         —  debug 
         —  detail 
         —  flat 
         —  full-context 
         —  intended 
         —  json 
         —  li 
         —  running 
         —  units 
         —  xml 
   —  support-mode 
   —  system 
      —  license 
         —  activate 
            —  [file-url] string
            —  now 
         —  validate 
            —  [file-url] string
      —  management-interface 
         —  operations 
            —  delete-operation 
               —  [delete-id] number
               —  op-table-bypass boolean
            —  stop-operation 
               —  op-table-bypass boolean
               —  [stop-id] number
      —  security 
         —  hash-control 
            —  custom-hash 
               —  algorithm keyword
               —  key string
            —  remove-custom-hash 
         —  system-password 
            —  admin-password 
            —  vsd-password 
      —  telemetry 
         —  grpc 
            —  cancel 
               —  all 
               —  subscription-id number
   —  tech-support 
      —  [url] string

admin command descriptions

admin


	Synopsis	Enter the administrative context for system operations
	Context	admin
	Tree	admin
	Introduced	16.0.R1
	Platforms	All

application-assurance


	Synopsis	Enter the application-assurance context
	Context	admin application-assurance
	Tree	application-assurance
	Description	Commands in this context configure Application Assurance (AA) upgrade and AA group upgrade operations.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group [aa-group-id] reference


	Synopsis	Enter the group list instance
	Context	admin application-assurance group reference
	Tree	group
	Description	Commands in this context configure the attributes of the group-specific upgrade.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[aa-group-id] reference


	Synopsis	AA group ID
	Context	admin application-assurance group reference
	Tree	group
	Reference	state application-assurance group number
	Notes	This element is part of a list key.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

url-list [url-list-name] reference


	Synopsis	Enter the url-list list instance
	Context	admin application-assurance group reference url-list reference
	Tree	url-list
	Description	Commands in this context configure the URL list upgrade parameters.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[url-list-name] reference


	Synopsis	AA URL list name
	Context	admin application-assurance group reference url-list reference
	Tree	url-list
	Reference	state application-assurance group url-list string
	Notes	This element is part of a list key.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

upgrade


	Synopsis	Upgrade the referenced URL list
	Context	admin application-assurance group reference url-list reference upgrade
	Tree	upgrade
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

upgrade


	Synopsis	Upgrade to a new isa-aa.tim file
	Context	admin application-assurance upgrade
	Tree	upgrade
	Description	This command loads a new isa-aa.tim file as part of a router-independent signature upgrade. An AA ISA reboot is required for the upgrade to take effect.
	Introduced	21.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

clear


	Synopsis	Enter the clear context
	Context	admin clear
	Tree	clear
	Introduced	19.10.R1
	Platforms	All

security


	Synopsis	Enter the security context
	Context	admin clear security
	Tree	security
	Introduced	19.10.R1
	Platforms	All

lockout


	Synopsis	Reset the lockout timer
	Context	admin clear security lockout
	Tree	lockout
	Introduced	19.10.R1
	Platforms	All

all


	Synopsis	Clear lockout of all users
	Context	admin clear security lockout all
	Tree	all
	Notes	The following elements are part of a mandatory choice: all or user.
	Introduced	19.10.R1
	Platforms	All

user string


	Synopsis	User to be cleared of lockout
	Context	admin clear security lockout user string
	Tree	user
	String Length	1 to 32
	Notes	The following elements are part of a mandatory choice: all or user.
	Introduced	19.10.R1
	Platforms	All

password-history


	Synopsis	Clear the password history
	Context	admin clear security password-history
	Tree	password-history
	Introduced	19.10.R1
	Platforms	All

all


	Synopsis	Clear password history of all users
	Context	admin clear security password-history all
	Tree	all
	Notes	The following elements are part of a mandatory choice: all or user.
	Introduced	19.10.R1
	Platforms	All

user string


	Synopsis	User to be cleared of password history information
	Context	admin clear security password-history user string
	Tree	user
	String Length	1 to 32
	Notes	The following elements are part of a mandatory choice: all or user.
	Introduced	19.10.R1
	Platforms	All

disconnect


	Synopsis	Disconnect a user session
	Context	admin disconnect
	Tree	disconnect
	Introduced	16.0.R1
	Platforms	All

address (ipv4-address-no-zone | ipv6-address-no-zone)


	Synopsis	IP address of the session to disconnect
	Context	admin disconnect address (ipv4-address-no-zone \| ipv6-address-no-zone)
	Tree	address
	Introduced	19.10.R1
	Platforms	All

op-table-bypass boolean


	Synopsis	Avoid operation ID allocation
	Context	admin disconnect op-table-bypass boolean
	Tree	op-table-bypass
	Description	When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
	Introduced	21.5.R1
	Platforms	All

session-id number


	Synopsis	ID of the session to disconnect
	Context	admin disconnect session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	16.0.R1
	Platforms	All

session-type keyword


	Synopsis	Type of session to disconnect
	Context	admin disconnect session-type keyword
	Tree	session-type
	Options	console, bluetooth, telnet, ssh, ftp, netconf, grpc, cron-ehs
	Introduced	19.10.R1
	Platforms	All

username string


	Synopsis	Username to disconnect
	Context	admin disconnect username string
	Tree	username
	String Length	1 to 32
	Introduced	19.10.R1
	Platforms	All

nat


	Synopsis	Enter the nat context
	Context	admin nat
	Tree	nat
	Introduced	21.2.R1
	Platforms	All

save-deterministic-script


	Synopsis	Save script that computes deterministic NAT map entries
	Context	admin nat save-deterministic-script
	Tree	save-deterministic-script
	Introduced	21.2.R1
	Platforms	All

reboot


	Synopsis	Reboot CPM or force an upgrade of system boot ROMs
	Context	admin reboot
	Tree	reboot
	Introduced	16.0.R1
	Platforms	All

[card] keyword


	Synopsis	Card to reboot
	Context	admin reboot [card] keyword
	Tree	[card]
	Options	active, standby, upgrade
	Introduced	16.0.R1
	Platforms	All

hold


	Synopsis	Hold a rebooted standby CPM from coming back online
	Context	admin reboot hold
	Tree	hold
	Introduced	19.10.R1
	Platforms	7750 SR-7s, 7750 SR-14s, VSR

now


	Synopsis	Reboot immediately without prompts or confirmation
	Context	admin reboot now
	Tree	now
	Introduced	16.0.R1
	Platforms	All

redundancy


	Synopsis	Enter the redundancy context
	Context	admin redundancy
	Tree	redundancy
	Introduced	16.0.R1
	Platforms	All

force-switchover


	Synopsis	Force a switchover to the standby CPM
	Context	admin redundancy force-switchover
	Tree	force-switchover
	Introduced	16.0.R1
	Platforms	All

ignore-status


	Synopsis	Switch to the standby CPM regardless of its status
	Context	admin redundancy force-switchover ignore-status
	Tree	ignore-status
	Introduced	19.10.R1
	Platforms	7950 XRS

now


	Synopsis	Force the switchover to the standby CPM immediately
	Context	admin redundancy force-switchover now
	Tree	now
	Introduced	16.0.R1
	Platforms	All

synchronize


	Synopsis	Synchronize the standby CPM
	Context	admin redundancy synchronize
	Tree	synchronize
	Introduced	20.10.R1
	Platforms	All

boot-environment


	Synopsis	Synchronize files used in system initialization
	Context	admin redundancy synchronize boot-environment
	Tree	boot-environment
	Notes	The following elements are part of a mandatory choice: boot-environment or configuration.
	Introduced	20.10.R1
	Platforms	All

configuration


	Synopsis	Synchronize the configuration files only
	Context	admin redundancy synchronize configuration
	Tree	configuration
	Notes	The following elements are part of a mandatory choice: boot-environment or configuration.
	Introduced	20.10.R1
	Platforms	All

satellite


	Synopsis	Perform administrative operations for satellites
	Context	admin satellite
	Tree	satellite
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

ethernet-satellite [satellite-id] reference


	Synopsis	Enter the ethernet-satellite list instance
	Context	admin satellite ethernet-satellite reference
	Tree	ethernet-satellite
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

[satellite-id] reference


	Synopsis	Satellite ID
	Context	admin satellite ethernet-satellite reference
	Tree	ethernet-satellite
	Reference	state satellite ethernet-satellite number
	Notes	This element is part of a list key.
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

reboot


	Synopsis	Initiate an administrative reboot of the chassis
	Context	admin satellite ethernet-satellite reference reboot
	Tree	reboot
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

now


	Synopsis	Reboot immediately without prompts or confirmation
	Context	admin satellite ethernet-satellite reference reboot now
	Tree	now
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

upgrade


	Synopsis	Initiate a firmware image update during the reboot
	Context	admin satellite ethernet-satellite reference reboot upgrade
	Tree	upgrade
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

synchronize


	Synopsis	Synchronize the chassis to the boot image
	Context	admin satellite ethernet-satellite reference synchronize
	Tree	synchronize
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

tech-support


	Synopsis	Save satellite technical support information
	Context	admin satellite ethernet-satellite reference tech-support
	Tree	tech-support
	Description	This command creates a system core dump. If no file URL is specified and the ts-location command is configured in the configure system security tech-support context, the technical support file is automatically generated by the system with the file name based on the system name and the date and time, and is saved to the directory indicated by the ts-location configuration. The format of the auto-generated file name is ts-XXXXX.YYYYMMDD.HHMMUTC.dat, where: XXXXX is the system name with special characters expanded to avoid problems with file systems (for example, a period (.) is expanded to %2E) YYYYMMDD is the date with leading zeros on the year, month, and day HHMM is the hours and minutes in UTC time (24 hour format, always 4 characters, with leading zeros on the hours and minutes) Note: This command is not supported over non-interactive interfaces (for example, NETCONF). Note: This command should only be used with authorized direction from the Nokia Technical Assistance Center (TAC).
	Introduced	22.2.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

[url] string


	Synopsis	URL to save technical support information
	Context	admin satellite ethernet-satellite reference tech-support [url] string
	Tree	[url]
	String Length	1 to 180
	Notes	This element is mandatory.
	Introduced	22.2.R1
	Platforms	All

save


	Synopsis	Perform configuration save operations
	Context	admin save
	Tree	save
	Introduced	16.0.R1
	Platforms	All

bof


	Synopsis	Save the BOF region configuration
	Context	admin save bof
	Tree	bof
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	20.10.R1
	Platforms	All

configure


	Synopsis	Save the configure region configuration
	Context	admin save configure
	Tree	configure
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	20.7.R2
	Platforms	All

debug


	Synopsis	Save the debug region configuration
	Context	admin save debug
	Tree	debug
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	21.5.R1
	Platforms	All

li


	Synopsis	Save the LI region configuration
	Context	admin save li
	Tree	li
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	19.10.R1
	Platforms	All

[url] string


	Synopsis	Location to save the configuration
	Context	admin save [url] string
	Tree	[url]
	Introduced	16.0.R1
	Platforms	All

set


	Synopsis	Enter the set context
	Context	admin set
	Tree	set
	Introduced	19.10.R1
	Platforms	All

time


	Synopsis	System date and time
	Context	admin set time
	Tree	time
	Introduced	19.10.R1
	Platforms	All

[system-time] string


	Synopsis	System date and time
	Context	admin set time [system-time] string
	Tree	[system-time]
	Description	This command sets the system date and time. The time zone may optionally be specified. When the time zone is not specified, the system uses the configured system time zone.
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

show


	Synopsis	Enter the show context
	Context	admin show
	Tree	show
	Introduced	16.0.R1
	Platforms	All

configuration


	Synopsis	Show the current configuration
	Context	admin show configuration
	Tree	configuration
	Introduced	16.0.R1
	Platforms	All

bof


	Synopsis	Show the BOF region configuration
	Context	admin show configuration bof
	Tree	bof
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	20.10.R1
	Platforms	All

booted


	Synopsis	Show the booted BOF configuration
	Context	admin show configuration booted
	Tree	booted
	Notes	The following elements are part of a choice: booted or cflash-id.
	Introduced	20.10.R1
	Platforms	All

cflash-id string


	Synopsis	Show the BOF configuration file on a compact flash
	Context	admin show configuration cflash-id string
	Tree	cflash-id
	String Length	4 to 6
	Notes	The following elements are part of a choice: booted or cflash-id.
	Introduced	20.10.R1
	Platforms	All

[cli-path] string


	Synopsis	Absolute path or relative path from '/'
	Context	admin show configuration [cli-path] string
	Tree	[cli-path]
	Introduced	21.10.R1
	Platforms	All

configure


	Synopsis	Show the configure region configuration
	Context	admin show configuration configure
	Tree	configure
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	20.7.R1
	Platforms	All

debug


	Synopsis	Show the debug region configuration
	Context	admin show configuration debug
	Tree	debug
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	21.5.R1
	Platforms	All

detail


	Synopsis	Include default and unconfigured values
	Context	admin show configuration detail
	Tree	detail
	Introduced	20.7.R1
	Platforms	All

flat


	Synopsis	Show the context from the pwc on each line
	Context	admin show configuration flat
	Tree	flat
	Notes	The following elements are part of a choice: flat, full-context, json, or xml.
	Introduced	20.7.R1
	Platforms	All

full-context


	Synopsis	Show the full context on each line
	Context	admin show configuration full-context
	Tree	full-context
	Notes	The following elements are part of a choice: flat, full-context, json, or xml.
	Introduced	20.7.R1
	Platforms	All

intended


	Synopsis	Show the intended configuration
	Context	admin show configuration intended
	Tree	intended
	Notes	The following elements are part of a choice: intended or running.
	Introduced	20.7.R1
	Platforms	All

json


	Synopsis	Show the output in indented JSON format
	Context	admin show configuration json
	Tree	json
	Notes	The following elements are part of a choice: flat, full-context, json, or xml.
	Introduced	19.10.R1
	Platforms	All

li


	Synopsis	Show the LI region configuration
	Context	admin show configuration li
	Tree	li
	Notes	The following elements are part of a choice: bof, configure, debug, or li.
	Introduced	19.10.R1
	Platforms	All

running


	Synopsis	Show the running configuration
	Context	admin show configuration running
	Tree	running
	Notes	The following elements are part of a choice: intended or running.
	Introduced	20.7.R1
	Platforms	All

units


	Synopsis	Include unit types for applicable elements
	Context	admin show configuration units
	Tree	units
	Introduced	20.10.R1
	Platforms	All

xml


	Synopsis	Show the output in indented XML format
	Context	admin show configuration xml
	Tree	xml
	Notes	The following elements are part of a choice: flat, full-context, json, or xml.
	Introduced	20.7.R1
	Platforms	All

support-mode


	Synopsis	Enable the shell and kernel commands
	Context	admin support-mode
	Tree	support-mode
	Introduced	16.0.R4
	Platforms	All

system


	Synopsis	Enter the system context
	Context	admin system
	Tree	system
	Introduced	16.0.R6
	Platforms	All

license


	Synopsis	Enter the license context
	Context	admin system license
	Tree	license
	Introduced	19.10.R1
	Platforms	All

activate


	Synopsis	Load and activate a system license
	Context	admin system license activate
	Tree	activate
	Introduced	19.10.R1
	Platforms	All

[file-url] string


	Synopsis	Location of the license file to activate
	Context	admin system license activate [file-url] string
	Tree	[file-url]
	String Length	1 to 256
	Introduced	19.10.R1
	Platforms	All

now


	Synopsis	Activate the license immediately
	Context	admin system license activate now
	Tree	now
	Introduced	19.10.R1
	Platforms	All

validate


	Synopsis	Load and validate a system license
	Context	admin system license validate
	Tree	validate
	Introduced	19.10.R1
	Platforms	All

[file-url] string


	Synopsis	Location of the license file to validate
	Context	admin system license validate [file-url] string
	Tree	[file-url]
	String Length	1 to 256
	Introduced	19.10.R1
	Platforms	All

management-interface


	Synopsis	Enter the management-interface context
	Context	admin system management-interface
	Tree	management-interface
	Introduced	21.5.R1
	Platforms	All

operations


	Synopsis	Enter the operations context
	Context	admin system management-interface operations
	Tree	operations
	Description	Commands in this context are used to manage YANG-based operations (for example, admin reboot, or ping) in model-driven interfaces.
	Introduced	21.5.R1
	Platforms	All

delete-operation


	Synopsis	Stop and remove an operation
	Context	admin system management-interface operations delete-operation
	Tree	delete-operation
	Description	This command removes an operation and all status and data associated with it. If the operation was executing, it is stopped before removal.
	Introduced	21.5.R1
	Platforms	All

[delete-id] number


	Synopsis	ID of the operation to remove
	Context	admin system management-interface operations delete-operation [delete-id] number
	Tree	[delete-id]
	Range	1 to 10000
	Notes	This element is mandatory.
	Introduced	21.5.R1
	Platforms	All

op-table-bypass boolean


	Synopsis	Avoid operation ID allocation
	Context	admin system management-interface operations delete-operation op-table-bypass boolean
	Tree	op-table-bypass
	Description	When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
	Introduced	21.5.R1
	Platforms	All

stop-operation


	Synopsis	Stop the execution of an operational command
	Context	admin system management-interface operations stop-operation
	Tree	stop-operation
	Description	This command stops the execution of an operational command. An operation launched as "asynchronous" is not deleted from the system when it is stopped. Status and other data associated with the operation persist until the operation is explicitly deleted using the delete operation command or a retention timeout.
	Introduced	21.5.R1
	Platforms	All

op-table-bypass boolean


	Synopsis	Avoid operation ID allocation
	Context	admin system management-interface operations stop-operation op-table-bypass boolean
	Tree	op-table-bypass
	Description	When configured to true, the system bypasses the YANG-based operations infrastructure and avoids the allocation of an operation ID. This is useful if the global operations table is full and a delete operation or admin disconnect is required.
	Introduced	21.5.R1
	Platforms	All

[stop-id] number


	Synopsis	ID of the operation to stop
	Context	admin system management-interface operations stop-operation [stop-id] number
	Tree	[stop-id]
	Range	1 to 10000
	Notes	This element is mandatory.
	Introduced	21.5.R1
	Platforms	All

security


	Synopsis	Enter the security context
	Context	admin system security
	Tree	security
	Introduced	16.0.R6
	Platforms	All

hash-control


	Synopsis	Enter the hash-control context
	Context	admin system security hash-control
	Tree	hash-control
	Introduced	16.0.R6
	Platforms	All

custom-hash


	Synopsis	Custom encryption
	Context	admin system security hash-control custom-hash
	Tree	custom-hash
	Introduced	16.0.R6
	Platforms	All

algorithm keyword


	Synopsis	Algorithm for custom encryption
	Context	admin system security hash-control custom-hash algorithm keyword
	Tree	algorithm
	Description	This command configures the algorithm for custom encryption. The encryption uses ECB mode, PKCS#7 padding, and Base64 encoding.
	Options	3des, aes128, aes192, aes256
	Notes	This element is mandatory.
	Introduced	16.0.R6
	Platforms	All

key string


	Synopsis	Key for encryption algorithm
	Context	admin system security hash-control custom-hash key string
	Tree	key
	String Length	1 to 71
	Notes	This element is mandatory.
	Introduced	16.0.R6
	Platforms	All

remove-custom-hash


	Synopsis	Remove the custom encryption
	Context	admin system security hash-control remove-custom-hash
	Tree	remove-custom-hash
	Introduced	20.10.R1
	Platforms	All

system-password


	Synopsis	Change a local system password
	Context	admin system security system-password
	Tree	system-password
	Introduced	22.10.R2
	Platforms	All

admin-password


	Synopsis	Administrative password
	Context	admin system security system-password admin-password
	Tree	admin-password
	Notes	The following elements are part of a choice: admin-password or vsd-password.
	Introduced	22.10.R2
	Platforms	All

vsd-password


	Synopsis	VSD password
	Context	admin system security system-password vsd-password
	Tree	vsd-password
	Notes	The following elements are part of a choice: admin-password or vsd-password.
	Introduced	22.10.R2
	Platforms	All

telemetry


	Synopsis	Enter the telemetry context
	Context	admin system telemetry
	Tree	telemetry
	Introduced	19.10.R1
	Platforms	All

grpc


	Synopsis	Enter the grpc context
	Context	admin system telemetry grpc
	Tree	grpc
	Introduced	19.10.R1
	Platforms	All

cancel


	Synopsis	Cancel the gRPC dynamic telemetry subscription
	Context	admin system telemetry grpc cancel
	Tree	cancel
	Introduced	19.10.R1
	Platforms	All

all


	Synopsis	Cancel gRPC dynamic telemetry for all subscriptions
	Context	admin system telemetry grpc cancel all
	Tree	all
	Notes	The following elements are part of a mandatory choice: all or subscription-id.
	Introduced	19.10.R1
	Platforms	All

subscription-id number


	Synopsis	ID of the telemetry subscription to cancel
	Context	admin system telemetry grpc cancel subscription-id number
	Tree	subscription-id
	Max. Range	0 to 4294967295
	Notes	The following elements are part of a mandatory choice: all or subscription-id.
	Introduced	19.10.R1
	Platforms	All

tech-support


	Synopsis	Save technical support information to a file
	Context	admin tech-support
	Tree	tech-support
	Introduced	20.10.R1
	Platforms	All

[url] string


	Synopsis	URL to save technical support information
	Context	admin tech-support [url] string
	Tree	[url]
	String Length	1 to 180
	Introduced	20.10.R1
	Platforms	All