f Commands
failover
failover
Syntax
failover
Context
[Tree] (tools>perform>router>dhcp>server>pool failover)
[Tree] (tools>perform>router>dhcp6>server>pool failover)
[Tree] (tools>perform>router>dhcp6>server failover)
[Tree] (tools>perform>router>dhcp>server failover)
Full Context
tools perform router dhcp local-dhcp-server pool failover
tools perform router dhcp6 local-dhcp-server pool failover
tools perform router dhcp6 local-dhcp-server failover
tools perform router dhcp local-dhcp-server failover
Description
Commands in this context perform local DHCP or DHCP6 server failover tasks.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
failover-pool-stats
failover-pool-stats
Syntax
failover-pool-stats [pool-name]
Context
[Tree] (show>router>dhcp>local-dhcp-server failover-pool-stats)
[Tree] (show>router>dhcp6>local-dhcp-server failover-pool-stats)
Full Context
show router dhcp local-dhcp-server failover-pool-stats
show router dhcp6 local-dhcp-server failover-pool-stats
Description
This command displays failover pool statistics.
Parameters
- pool-name
Specifies the pool name which is defined in the system.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of failover pool stats information
Sample Output*A:cses-V22>show>router>dhcp>server# failover-pool-stats
==================================================================
Failover config for pool test
==================================================================
Failover Admin State outOfService
Failover Oper State shutdown
Failover Persist Key 0xFFFFFFFF
Administrative MCLT 0h10m0s
Operational MCLT 0h10m0s
Startup Wait Time 0h2m0s
Partner Down Delay 23h59m59s
Ignore MCLT disabled
Failover statistics for pool test
------------------------------------------------------------------
Dropped Invalid Packets 0
Failover Shutdown 0
Lease Already Expired 0
Maximum Lease Count Reached 0
Subnet Not Found 0
Range Not Found 0
Host Conflict 0
Address Conflict 0
Peer Conflict 0
Persistence Congestion 0
No Lease Hold Time Configured 0
Invalid Prefix Length 0
Lease Not Found 0
------------------------------------------------------------------
Number of pools found 1
==================================================================
*A:cses-V22>show>router>dhcp>server#
*A:vsim-2# show router 500 dhcp6 local-dhcp-server "d6" failover-pool-stats
==================================================================
Failover config for pool v6-1
==================================================================
Failover Admin State inService
Failover Oper State preNormal
Failover Persist Key 0xFFFFFFFF
Administrative MCLT 0h10m0s
Operational MCLT 0h10m0s
Startup Wait Time 0h2m0s
Partner Down Delay 23h59m59s
Ignore MCLT disabled
Failover statistics for pool v6-1
------------------------------------------------------------------
Dropped Invalid Packets 0
Failover Shutdown 0
Lease Already Expired 0
Maximum Lease Count Reached 0
Subnet Not Found 0
Range Not Found 0
Host Conflict 0
Address Conflict 0
Peer Conflict 0
Persistence Congestion 0
No Lease Hold Time Configured 0
Lease Not Found 0
------------------------------------------------------------------
Number of pools found 1
==================================================================
Failover Pool Statistics Field Descriptions describes failover pool statistics output fields.
Field |
Description |
|---|---|
Failover Admin State |
Identifies the failover state of the DHCP server instance inService — The failover admin state is in service outOfService — The failover admin state is out of service |
Failover Oper State |
The operational state of a DHCP server instance |
Failover Persist Key |
The maximum amount of time that one server can extend a lease for a client's binding beyond the time known by the partner server |
Administrative MCLT |
The administrative Maximum Client Lead Time (MCLT) |
Operational MCLT |
Indicates the operational MCLT |
Startup Wait Time |
The startup wait time. The startup wait time is the time that one IP address pool attempts to contact the partner IP address pool. During this time, the IP address pool is unresponsive to DHCP client requests. |
Partner Down Delay |
The minimum safe-time after the beginning of COMMUNICATIONS-INTERRUPTED state. After the expiry of this time, the server enters the PARTNER-DOWN state. |
Ignore McLT |
The ignore McLT status. If, after the transition COMMUNICATIONS-INTERRUPTED-to-PARTNER-DOWN state, the DHCP server instance ignores the safety period with a duration of Maximum Client Lead Time; a 'true’ value has the effect that the DHCP server starts offering IP addresses from the partner's scope immediately after this transition, without waiting for existing leases allocated by the partner and not known by this system to time out. A 'true’ value increases the risk that duplicate addresses are offered; if the transition to PARTNER-DOWN state is likely to be caused by a failure of the partner system rather than a communications problem, this risk is reduced. |
Failover statistics for pool |
The failover statistics for each pool |
Dropped Invalid Packets |
The number of BNDUPD packets that were dropped because the packet was malformed |
Failover Shutdown |
The number of BNDUPD packets that were dropped because the failover state if the DHCP server instance is shut down |
Lease Already Expired |
The number of BNDUPD packets that were dropped because the corresponding lease has expired |
Maximum Lease Count Reached |
The number of BNDUPD packets that were dropped because the maximum number of leases were reached |
Subnet Not Found |
The number of BNDUPD packets that were dropped because a valid subnet could not be found for the lease |
Range Not Found |
The number of BNDUPD packets that were dropped because a valid include range could not be found for the lease |
Host Conflict |
The number of BNDUPD packets that were dropped because this DHCP server instance has already leased this address to another host |
Address Conflict |
The number of BNDUPD packets that were dropped because this DHCP server instance has already leased another address to this host |
Peer Conflict |
The number of BNDUPD packets that were dropped because the failover peer has leased an address within a subnet range of which the failover control is set to local on this local DHCP server instance |
Persist Congestion |
The number of BNDUPD packets that were dropped because of persistence congestion on this DHCP server instance |
No Lease Hold Time Configured |
The number of BNDUPD packets that were dropped because the lease hold time is zero on this DHCP server instance |
Lease Not Found |
The number of Binding Database Update (BNDUPD) remove packets were dropped because the corresponding lease could not be found. |
Number of pools found |
The total number of pools found |
failover-pool-stats
Syntax
failover-pool-stats [pool-name]
Context
[Tree] (clear>router>dhcp>server failover-pool-stats)
[Tree] (clear>router>dhcp6>server failover-pool-stats)
Full Context
clear router dhcp local-dhcp-server failover-pool-stats
clear router dhcp6 local-dhcp-server failover-pool-stats
Description
This command clears failover pool statistics.
Parameters
- pool-name
Clears information about the pool name which is defined in the system.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
failover-server-stats
failover-server-stats
Syntax
failover-server-stats
Context
[Tree] (show>router>dhcp6>local-dhcp-server failover-server-stats)
[Tree] (show>router>dhcp>local-dhcp-server failover-server-stats)
Full Context
show router dhcp6 local-dhcp-server failover-server-stats
show router dhcp local-dhcp-server failover-server-stats
Description
This command displays failover server statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of failover server stats information.
Sample Outputshow>router>dhcp# local-dhcp-server "y" failover-server-stats
==================================================================
Failover config for server y
==================================================================
Failover Admin State outOfService
Failover Oper State shutdown
Failover Persist Key 0xFFFFFFFF
Administrative MCLT 0h10m0s
Operational MCLT 0h10m0s
Startup Wait Time 0h2m0s
Partner Down Delay 23h59m59s
Ignore MCLT disabled
Failover statistics for server y
------------------------------------------------------------------
Dropped Invalid Packets 0
Failover Shutdown 0
Lease Already Expired 0
Maximum Lease Count Reached 0
Subnet Not Found 0
Range Not Found 0
Host Conflict 0
Address Conflict 0
Peer Conflict 0
Persistence Congestion 0
No Lease Hold Time Configured 0
Invalid Prefix Length 0
Lease Not Found 0
==================================================================
*A:cses-V26>show>router>dhcp6>server# failover-server-stats
==================================================================
Failover config for server test1
==================================================================
Failover Admin State outOfService
Failover Oper State shutdown
Failover Persist Key 0xFFFFFFFF
Administrative MCLT 0h10m0s
Operational MCLT 0h10m0s
Startup Wait Time 0h2m0s
Partner Down Delay 23h59m59s
Ignore MCLT disabled
Failover statistics for server test1
------------------------------------------------------------------
Dropped Invalid Packets 0
Failover Shutdown 0
Lease Already Expired 0
Maximum Lease Count Reached 0
Subnet Not Found 0
Range Not Found 0
Host Conflict 0
Address Conflict 0
Peer Conflict 0
Persistence Congestion 0
No Lease Hold Time Configured 0
Invalid Prefix Length 0
Lease Not Found 0
==================================================================
*A:cses-V26>show>router>dhcp6>server#
Failover Server Statistics Field Descriptions describes failover server stats fields.
Field |
Description |
|---|---|
Failover Admin State |
Identifiers the failover state of the DHCP server instance inService — The failover admin state is in service outOfService — The failover admin state is out of service |
Failover Oper State |
The operational state of a DHCP server instance |
Failover Persist Key |
The maximum amount of time that one server can extend a lease for a client's binding beyond the time known by the partner server |
Administrative MCLT |
The administrative Maximum Client Lead Time (MCLT) |
Operational MCLT |
Indicates the operational MCLT |
Startup Wait Time |
The startup wait time. The startup wait time is the time that one IP address pool attempts to contact the partner IP address pool. During this time, the IP address pool is unresponsive to DHCP client requests. |
Partner Down Delay |
The minimum safe-time after the beginning of COMMUNICATIONS-INTERRUPTED state. After the expiry of this time, the server enters the PARTNER-DOWN state. |
Ignore McLT |
The ignore McLT status. If, after the transition COMMUNICATIONS-INTERRUPTED-to-PARTNER-DOWN state, the DHCP server instance ignores the safety period with a duration of Maximum Client Lead Time; a 'true’ value has the effect that the DHCP server starts offering IP addresses from the partner's scope immediately after this transition, without waiting for existing leases allocated by the partner and not known by this system to time out. A 'true’ value increases the risk that duplicate addresses are offered; if the transition to PARTNER-DOWN state is likely to be caused by a failure of the partner system rather than a communications problem, this risk is reduced. |
Failover statistics for server |
The failover statistics for each pool |
Dropped Invalid Packets |
The number of BNDUPD packets that were dropped because the packet was malformed |
Failover Shutdown |
The number of BNDUPD packets that were dropped because the failover state if the DHCP server instance is shut down |
Lease Already Expired |
The number of BNDUPD packets that were dropped because the corresponding lease has expired |
Maximum Lease Count Reached |
The number of BNDUPD packets that were dropped because the maximum number of leases were reached |
Subnet Not Found |
The number of BNDUPD packets that were dropped because a valid subnet could not be found for the lease |
Range Not Found |
The number of BNDUPD packets that were dropped because a valid include range could not be found for the lease. |
Host Conflict |
The number of BNDUPD packets that were dropped because this DHCP server instance has already leased this address to another host |
Address Conflict |
The number of BNDUPD packets that were dropped because this DHCP server instance has already leased another address to this host |
Peer Conflict |
The number of BNDUPD packets that were dropped because the failover peer has leased an address within a subnet range of which the failover control is set to local on this local DHCP server instance |
Persist Congestion |
The number of BNDUPD packets that were dropped because of persistence congestion on this DHCP server instance |
No Lease Hold Time Configured |
The number of BNDUPD packets that were dropped because the lease hold time is zero on this DHCP server instance |
Lease Not Found |
The number of Binding Database Update (BNDUPD) remove packets were dropped because the corresponding lease could not be found. |
failure-recovery
failure-recovery
Syntax
failure-recovery {start | abort | clear-hold-down}
Context
[Tree] (tools>perform>system>switch-fabric failure-recovery)
Full Context
tools perform system switch-fabric failure-recovery
Description
This command controls the automatic switch-fabric failure recovery.
Parameters
- start
Forces the initiation of the recovery process.
- abort
Terminates a running recovery process.
- clear-hold-down
Clears the hold-down condition and allows the recovery to run immediately when the trigger condition occurs.
Platforms
7450 ESS, 7750 SR-7, 7950 XRS-20, 7950 XRS-40
fate-sharing
fate-sharing
Syntax
fate-sharing
Context
[Tree] (show>service>id>spb fate-sharing)
Full Context
show service id spb fate-sharing
Description
This command displays SPB fate-sharing information on User B-VPLS service, in correspond to associated Control B-VPLS service.
Platforms
All
Output
The following output is an example of service SPB fate sharing information.
Sample Output*A:Dut-A# Node show service id spb fate-sharing
===============================================================================
User service fate-shared sap/sdp-bind information
===============================================================================
Control Control Sap/ FID User User Sap/
SvcId SdpBind SvcId SdpBind
-------------------------------------------------------------------------------
500 1/1/20:500 502 502 1/1/20:502
===============================================================================
fd-domain-sync
fd-domain-sync
Syntax
fd-domain-sync {full | diff}
Context
[Tree] (tools>perform>service>vsd fd-domain-sync)
Full Context
tools perform service vsd fd-domain-sync
Description
This command instructs the system to audit the VSD and retrieve either the "DIFF” list or the "FULL” list of domains in the VSD.
Parameters
- full
Retrieves the full VSD domain list.
- diff
Retrieves the diff VSD domain list.
Platforms
All
fdb
fdb
Syntax
fdb [sap sap-id [expiry]] | [ sdp sdp-id [expiry]] | [mac ieee-address [expiry]] | endpoint endpoint | [ detail] [expiry] [pbb]
Context
[Tree] (show>service>id fdb)
Full Context
show service id fdb
Description
This command displays FDB entries for a specified MAC address.
Parameters
- sap-id
Specifies the physical port identifier portion of the SAP
- detail
Displays detailed information
- expiry
Displays time until MAC is aged out
- pbb
Displays PBB related information. This keyword is only applicable to B-VPLS or I-VPLS services. This parameter applies to the 7450 ESS or 7750 SR only.
- endpoint-name
Specifies an endpoint name up to 32 characters in length. This parameter applies to the 7450 ESS or 7750 SR only.
Platforms
All
Output
The following is an example of service FDB information.
Sample OutputA:ALA-48>show>service>id# fdb mac detail
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type/Age Last Change
-------------------------------------------------------------------------------
6 00:aa:00:00:00:00 sap:lag-2 L/0 06/27/2006 15:04:31
6 00:aa:00:00:00:01 sap:lag-2 L/0 06/27/2006 15:04:31
6 00:aa:00:00:00:02 sap:lag-2 L/0 06/27/2006 15:04:31
6 00:aa:00:00:00:03 sap:lag-2 L/0 06/27/2006 15:04:31
6 00:aa:00:00:00:04 sap:lag-2 L/0 06/27/2006 15:04:31
10 12:12:12:12:12:12 sap:1/1/1:100 S 06/26/2006 10:03:29
===============================================================================
A:ALA-48>show>service>id#
A:PE-1# show service id 1 fdb detail
===============================================================================
Forwarding Database, Service 1
===============================================================================
ServId MAC Source-Identifier Type Last Change
Age
-------------------------------------------------------------------------------
1 00:00:00:00:00:01 sap:1/1/1 LP/0 02/24/12 11:40:07
-------------------------------------------------------------------------------
No. of MAC Entries: 1
-------------------------------------------------------------------------------
Legend: L=Learned O=Oam P=Protected-MAC
===============================================================================
A:PE-1#
A:PE1# show service id 1 fdb
===============================================================================
Forwarding Database, Service 1
===============================================================================
Service Id : 1 Mac Move : Disabled
Primary Factor : 3 Secondary Factor : 2
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Allocated Count : 4
Total In Use : 4
Learned Count : 2 Static Count : 0
OAM MAC Count : 0 DHCP MAC Count : 0
Host MAC Count : 0 Intf MAC Count : 0
Spb Count : 0 Cond MAC Count : 0
BGP EVPN Count : 0 EVPN Static Cnt : 2
EVPN Dup Det Cnt : 0
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
Mac Subnet Len : 48
Sel Learned FDB : Disabled
===============================================================================
A:PE1#
*A:cses-B0102>show>service>id# fdb detail
===============================================================================
Forwarding Database, Service 510
===============================================================================
ServId MAC Source-Identifier Type Last Change
Age
-------------------------------------------------------------------------------
510 00:00:00:aa:aa:aa sap:1/1/22:510 CStatic 06/14/13 20:16:19
510 00:00:00:bb:bb:bb sap:1/1/22:510 CStatic 06/14/13 20:14:49
510 00:00:00:dd:dd:dd sdp:7:2 Spb 06/14/13 20:03:23
510 d8:da:ff:00:00:00 sap:1/1/22:510 CStatic 06/14/13 21:06:38
510 d8:e0:ff:00:00:00 sdp:7:2 Spb 06/14/13 21:09:29
-------------------------------------------------------------------------------
No. of MAC Entries: 5
-------------------------------------------------------------------------------
Legend: L=Learned O=Oam P=Protected-MAC
===============================================================================
A:term17>config>service# show service id 2000 fdb pbb
(BVPLS = 2000, IVPLS = 2100)
===============================================================================
Forwarding Database, bVpls Service 2000
===============================================================================
MAC Source-Identifier iVplsMACs Type/Age Last Change
-------------------------------------------------------------------------------
00:f4:f4:f4:f4:f4 sdp:100:2000 10 L/0 09/25/2007 15:34:19
===============================================================================
A:term17>config>service#
*A:SetupCLI# show service id 2100 fdb pbb
========================================================================
Forwarding Database, iVpls Service 2100
========================================================================
MAC Source-Identifier B-Svc bVpls MAC Type/Age
------------------------------------------------------------------------
76:55:ff:00:01:a4 b-sdp:100:2000 2000 00:f4:f4:f4:f4:ff L/0
76:55:ff:00:01:bb sap:1/1/1:2100 2000 N/A Static
========================================================================
*A:SetupCLI#
A:term17>config>service# show service id 2100 fdb pbb
=============================================================================
Forwarding Database, iVpls Service 2100
=============================================================================
MAC Source-Identifier B-Svc bVpls MAC Type/Age
-----------------------------------------------------------------------------
00:f4:f4:f4:00:00 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:01 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:02 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:03 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:04 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:05 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:06 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:07 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:08 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f4:f4:f4:00:09 b-sdp:100:2000 2000 00:f4:f4:f4:f4:f4 L/0
00:f7:f7:f7:00:00 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:01 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:02 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:03 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:04 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:06 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:07 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:08 sap:lag-1:2100 2000 N/A L/0
00:f7:f7:f7:00:09 sap:lag-1:2100 2000 N/A L/0
=============================================================================
A:term17>config>service#
*A:SetupCLI# show service id 2100 fdb pbb
=============================================================================
Forwarding Database, iVpls Service 2100
=============================================================================
MAC Source-Identifier B-Svc bVpls MAC Type/Age
-----------------------------------------------------------------------------
76:55:ff:00:01:a4 b-sdp:100:2000 2000 00:f4:f4:f4:f4:ff L/0
76:55:ff:00:01:bb sap:1/1/1:2100 2000 N/A Static
=============================================================================
*A:SetupCLI#
# show service id 1 fdb detail
===============================================================================
Forwarding Database, Service 1
===============================================================================
ServId MAC Source-Identifier Type Last Change
Age
-------------------------------------------------------------------------------
1 00:ca:ca:ba:ca:01 eES: Evpn 06/29/15 23:21:34
01:00:00:00:00:71:00:00:00:01
1 00:ca:ca:ba:ca:06 eES: Evpn 06/29/15 23:21:34
01:74:13:00:74:13:00:00:74:13
1 00:ca:00:00:00:00 sap:1/1/1:2 CStatic 06/29/15 23:20:58
1 00:ca:fe:ca:fe:00 black-hole EvpnD:P 06/29/15 23:20:00
1 00:ca:fe:ca:fe:69 eMpls: EvpnS 06/29/15 20:40:13
192.0.2.69:262133
1 00:ca:fe:ca:fe:70 eMpls: EvpnS 06/29/15 20:43:29
192.0.2.70:262132
1 00:ca:fe:ca:fe:72 eMpls: EvpnS 06/29/15 20:47:39
192.0.2.72:262132
-------------------------------------------------------------------------------
No. of MAC Entries: 7
-------------------------------------------------------------------------------
Legend: L=Learned O=Oam P=Protected-MAC C=Conditional S=Static
===============================================================================
*A:PE-1# show service id 200 fdb detail
===============================================================================
Forwarding Database, Service 200
===============================================================================
ServId MAC Source-Identifier Type Last Change
Transport:Tnl-Id Age
-------------------------------------------------------------------------------
200 00:ca:ca:ba:ca:61 eMpls: EvpnS:P 02/25/19 21:13:27
192.0.2.6:524278
sr-policy:917509
200 00:ca:ca:ba:ca:62 eMpls: EvpnS:P 02/25/19 21:13:27
192.0.2.6:524278
sr-policy:917506
200 00:ca:fe:ca:fe:01 sap:1/1/c1/1:200 L/30 02/25/19 21:13:22
200 00:ca:fe:ca:fe:06 eMpls: Evpn 02/25/19 21:13:27
192.0.2.6:524278
sr-policy:917507
-------------------------------------------------------------------------------
No. of MAC Entries: 4
-------------------------------------------------------------------------------
Legend: L=Learned O=Oam P=Protected-MAC C=Conditional S=Static Lf=Leaf
===============================================================================
Show FDB Information Fields describes service FDB output fields.
Label |
Description |
|---|---|
ServID |
Displays the service ID. |
MAC |
Displays the associated MAC address. |
Transport:Tnl-Id |
Displays the tunnel type and tunnel ID of the FDB entry. |
Source Identifier |
Displays the id of the source MAC. |
Type/Age |
Type — Specifies the number of seconds used to age out TLS FDB entries learned on local SAPs. Age — Specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. L — Learned - Dynamic entries created by the learning process. OAM — Entries created by the OAM process. H — Host, the entry added by the system for a static configured subscriber host. D or DHCP — DHCP-installed MAC. Learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease. P — Indicates the MAC is protected by the MAC protection feature. Static — Statically configured. |
Last Change |
Indicates the time of the most recent state changes. |
fdb
Syntax
fdb {all | mac ieee-address | sap sap-id | mesh-sdp sdp-id [: vc-id] | spoke-sdp sdp-id [:vc- id] | vxlan-instance instance [vtep ip- address]}
Context
[Tree] (clear>service>id fdb)
Full Context
clear service id fdb
Description
This command clears the FDB entries for the service.
Parameters
- all
Clears all FDB entries.
- ieee-address
Clears only FDB entries in the FDB table with the specified 48-bitaddress. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bbcc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
- sap-id
Clears the physical port identifier portion of the SAP definition.
- mesh-sdp
Clears only the service FDB entries associated with the specified mesh SDP ID. For a mesh SDP, the VC ID is optional.
- spoke-sdp
Clears only the service FDB entries associated with the specified spoke-SDP ID. For a spoke-SDP, the VC ID must be specified.
- sap-id
Specifies the SDP ID for which the associated FDB entries will be cleared.
- vc-id
Specifies the virtual circuit ID on the SDP ID for which the associated FDB entries are cleared.
- instance
Clears only the service FDB entries associated with the specified static VXLAN instance.
- vtep ip-address
Specifies, optionally and along with the VXLAN instance, a specific configured static egress VTEP to clear the FDB entries associated only with the VTEP.
Platforms
All
fdb
Syntax
fdb
Context
[Tree] (show>service>id>spb fdb)
Full Context
show service id spb fdb
Description
This command displays SPB Forwarding database information (FDB).
Platforms
All
Output
The following output is an example of service SPB FDB information.
Sample Output*A:Dut-A# show service id 100001 spb fdb
==============================================================================
User service FDB information
==============================================================================
MacAddr UCast Source State MCast Source State
------------------------------------------------------------------------------
00:10:00:01:00:02 1/2/2:1.1 ok 1/2/2:1.1 ok
00:10:00:01:00:03 1/2/3:1.1 ok 1/2/3:1.1 ok
00:10:00:01:00:04 1/2/2:1.1 ok 1/2/2:1.1 ok
------------------------------------------------------------------------------
Entries found: 3
==============================================================================
fdb
Syntax
fdb
Context
[Tree] (tools>dump>service>id fdb)
Full Context
tools dump service id fdb
Description
Commands in this context dump selective learned FDB information.
Platforms
All
fdb-info
fdb-info
Syntax
fdb-info
Context
[Tree] (show>service fdb-info)
Full Context
show service fdb-info
Description
Displays global FDB usage information.
Platforms
All
Output
The following output displays an example of service FDB information.
Sample Output*A:PE1# show service fdb-info
===============================================================================
Forwarding Database(FDB) Information
===============================================================================
Service Id : 1 Mac Move : Disabled
Primary Factor : 3 Secondary Factor : 2
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Allocated Count : 3
Total In Use : 3
Learned Count : 2 Static Count : 0
OAM MAC Count : 0 DHCP MAC Count : 0
Host MAC Count : 0 Intf MAC Count : 0
Spb Count : 0 Cond MAC Count : 0
BGP EVPN Count : 0 EVPN Static Cnt : 2
EVPN Dup Det Cnt : 0
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
Mac Subnet Len : 48
Sel Learned FDB : Disabled
Service Id : 2 Mac Move : Disabled
Primary Factor : 3 Secondary Factor : 2
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Allocated Count : 2
Total In Use : 2
Learned Count : 4 Static Count : 0
OAM MAC Count : 0 DHCP MAC Count : 0
Host MAC Count : 0 Intf MAC Count : 0
Spb Count : 0 Cond MAC Count : 0
BGP EVPN Count : 0 EVPN Static Cnt : 0
EVPN Dup Det Cnt : 0
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
Mac Subnet Len : 48
Sel Learned FDB : Disabled
-------------------------------------------------------------------------------
Total Service FDBs : 2
Total FDB Configured Size : 500
Total FDB Entries In Use : 5
PBB MAC Address Indices In Use : 0
-------------------------------------------------------------------------------
===============================================================================
*A:PE1#
Show FDB Information Fields describes show FDB-Info command output.
Label |
Description |
|---|---|
ServID |
Displays the service ID. |
MAC |
Displays the associated MAC address. |
Mac Move |
Displays the administrative state of the MAC movement feature associated with this service. |
Primary Factor |
Displays a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate. |
Secondary Factor |
Displays a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate. |
Mac Move Rate |
Displays the maximum rate at which MACs can be re-learned in this service, before the SAP where the moving MAC was last seen is automatically disabled in order to protect the system against undetected loops or duplicate MAs. The rate is computed as the maximum number of re-learns allowed in a 5 second interval: for example, the default rate of 2 re-learns per second corresponds to 10 re-learns in a 5 second period. |
Mac Move Timeout |
Displays the time in seconds to wait before a SAP that has been disabled after exceeding the maximum re-learn rate is re-enabled. A value of zero indicates that the SAP will not be automatically re-enabled after being disabled. If after the SAP is re-enabled it is disabled again, the effective retry timeout is doubled in order to avoid thrashing. |
Mac Move Retries |
Displays the number of times retries are performed for re-enabling the SAP/SDP. |
Table Size |
Specifies the maximum number of learned and static entries allowed in the FDB of this service. |
Allocated Count |
Displays the total number of allocated entries in the FDB of this service. |
Total In Use |
Displays the total number of entries in use in the FDB of this service. |
Learned Count |
Displays the current number of learned entries in the FDB of this service. |
Static Count |
Displays the current number of static entries in the FDB of this service. |
OAM MAC Count |
Displays the current number of OAM entries in the FDB of this service. |
DHCP MAC Count |
Displays the current number of DHCP-learned entries in the FDB of this service. |
Host MAC Count |
Displays the current number of host-learned entries in the FDB of this service. |
Intf MAC Count |
Displays the total number of interface MAC entries in the FDB of this service. |
SPB Count |
Displays the total number of SPB entries in the FDB of this service. |
Cond MAC Count |
Displays the total number of conditional static MAC entries in the FDB of this service. |
BGP EVPN Count |
Displays the total number of BGP EVPN entries in the FDB of this service. |
EVPN Static Cnt |
Displays the total number of BGP EVPN MAC entries with the sticky bit set in the FDB of this service. |
EVPN Dup Det Cnt |
Displays the total number of times a BGP EVPN duplicate MAC address has been detected in this service. |
Remote Age |
Displays the number of seconds used to age out FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. |
Local Age |
Displays the number of seconds used to age out FDB entries learned on local SAPs. |
High Watermark |
Displays the utilization of the FDB table of this service at which a table full alarm will be raised by the agent. |
Low Watermark |
Displays the utilization of the FDB table of this service at which a table full alarm will be cleared by the agent. |
Mac Learning |
Specifies whether the MAC learning process is enabled. |
Discard Unknown |
Specifies whether frames received with an unknown destination MAC are discarded. |
Mac Aging |
Indicates whether the MAC aging process is enabled. |
Relearn Only |
When one of the FDB table size limits (service, line card, system) has been reached, the learning of new MAC addresses is temporary disabled and only MAC relearns are allowed. When in this state, the Relearn Only flag is True, otherwise it is False. |
Mac Subnet Len |
Displays the number of bits to be considered when performing MAC-learning or MAC-switching. |
Source-Identifier |
The location where the MAC is defined. |
Type/Age |
Type — Specifies the number of seconds used to age out TLS FDB entries learned on local SAPs. Age — Specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. L — Learned - Dynamic entries created by the learning process. OAM — Entries created by the OAM process. H — Host, the entry added by the system for a static configured subscriber host. D or DHCP — DHCP-installed MAC. Learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease. P — Indicates the MAC is protected by the MAC protection feature. Static — Statically configured. |
Last Change |
Indicates the time of the most recent state changes. |
Sel Learned FDB |
Displays the administrative state of the selective learned FDB feature associated with this service. |
fdb-mac
fdb-mac
Syntax
fdb-mac ieee-address [expiry]
Context
[Tree] (show>service fdb-mac)
Full Context
show service fdb-mac
Description
This command displays the FDB entry for a specified MAC address.
Parameters
- ieee-address
The 48-bit MAC address for which the FDB entry will be displayed in the form aa:bb: cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
- expiry
Shows the time until the MAC is aged out.
Platforms
All
Output
The following output displays an example of FDB MAC information.
Sample Output*A:ian2# show service fdb-mac
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type Last Change
Age
-------------------------------------------------------------------------------
1 00:00:00:00:00:01 sap:1/1/1 LP/0 01/07/2011 20:25:34
1 00:00:00:00:00:02 sap:1/1/2 L/0 01/07/2011 20:26:25
1 00:00:00:00:00:03 sap:1/1/1 A/0 01/07/2011 20:25:34
-------------------------------------------------------------------------------
No. of Entries: 2
-------------------------------------------------------------------------------
Legend: L=Learned; P=MAC is protected; A=Auto learn protected
===============================================================================
*A:ian2#
The following shows the protected MACs in the FDB.
A:term17>config>service>vpls>sap>arp-host# show service id 12 fdb detail
===============================================================================
Forwarding Database, Service 12
===============================================================================
ServId MAC Source-Identifier Type Last Change
Age
-------------------------------------------------------------------------------
12 00:00:07:00:00:00 sdp:8:1 LP/0 10/03/11 10:46:00
12 00:00:07:00:00:01 sdp:8:1 LP/0 10/03/11 10:46:00
12 00:00:07:00:00:62 sdp:8:1 LP/0 10/03/11 10:46:01
12 00:00:07:00:00:63 sdp:8:1 LP/0 10/03/11 10:46:01
12 00:11:11:11:11:11 sap:lag-100:12 Static:P 10/03/11 09:42:02
12 00:11:11:11:11:22 sap:lag-1:123 Static 10/03/11 09:42:02
12 00:11:11:11:11:33 sdp:8:1 Static:P 10/03/11 09:42:02
12 00:11:11:11:11:44 sap:2/1/3:13 Static 10/03/11 09:42:02
12 00:11:11:11:11:55 a(8:80) Static 10/03/11 09:42:02
12 00:11:11:11:11:66 sdp:8:10 Static 10/03/11 09:42:02
12 00:11:11:11:11:77 sap:2/1/3:15 Static 10/03/11 09:42:02
12 00:11:11:11:11:88 sap:2/1/3:14 Static 10/03/11 09:42:02
12 76:1e:ff:00:00:b2 cpm Host 10/03/11 09:42:02
-------------------------------------------------------------------------------
No. of MAC Entries: 109
The following example shows whether restrict-protected-src is enabled on an SDP.
*A:PE# show service id 1 sdp 1:1 detail
===============================================================================
Service Destination Point (Sdp Id : 1:1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1:1 -(1.1.1.2)
-------------------------------------------------------------------------------
…
RestMacProtSrc Act : SDP-oper-down
Show FDB-MAC Command Output Fields describes the show FDB-MAC command output fields.
Label |
Description |
|---|---|
Service ID |
The service ID number. |
MAC |
The specified MAC address. |
Source-Identifier |
The location where the MAC is defined. |
Type/Age |
Static — FDB entries created by management. |
Learned — Dynamic entries created by the learning process. |
|
OAM — Entries created by the OAM process. |
|
H — Host, the entry added by the system for a static configured subscriber host. |
|
D or DHCP — DHCP-installed MAC. Learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease. |
|
P — Indicates the MAC is protected by the MAC protection feature. |
fdb-usage
fdb-usage
Syntax
fdb-usage [card slot-id]
Context
[Tree] (show>service>system fdb-usage)
Full Context
show service system fdb-usage
Description
This command displays the FDB usage, excluding the pending updates (which can be seen using the tools dump service id id fdb {card-status | mac-status} command) for the system and all line cards.
Parameters
- slot-id
Displays the information for the line card in the specified slot IDs, expressed as an integer.
Platforms
All
Output
The following output is an example of FDB usage information.
Sample Output*A:PE1# show service system fdb-usage
===============================================================================
FDB Usage
===============================================================================
System
-------------------------------------------------------------------------------
Limit: 511999
Allocated: 8
Free: 511991
Global: 2
-------------------------------------------------------------------------------
Line Cards
-------------------------------------------------------------------------------
Card Selective Allocated Limit Free
-------------------------------------------------------------------------------
1 0 2 511999 511997
2 4 6 511999 511993
5 2 4 511999 511995
-------------------------------------------------------------------------------
===============================================================================
*A:PE1#
*A:PE1# show service system fdb-usage card 1
===============================================================================
FDB Usage
===============================================================================
Card Selective Allocated Limit Free
-------------------------------------------------------------------------------
1 0 2 511999 511997
===============================================================================
===============================================================================
*A:PE1#
fec
fec
Syntax
fec vc-type vc-type agi agi
fec p2mp-id identifier root ip-address
fec prefix ip-address[/mask]
fec root ip-address source ip-address group mcast-address [rd rd]
fec root ip-address source ip-address group mcast-address inner-root ip-address
fec vc-type vc-type vc-id vc-id
fec vc-type vc-type agi agi saii-type2 global-id:prefix:ac-id taii-type2 global-id:prefix:ac-id
Context
[Tree] (tools>dump>router>ldp fec)
Full Context
tools dump router ldp fec
Description
This command dumps information for an LDP FEC.
Parameters
- p2mp-id identifier
Dumps LDP active P2MP identifier bindings information.
- inner-root ip-address
Dumps inner root IP address information.
- root ip-address
Dumps root IP address information.
- prefix ip-address[/mask]
Dumps LDP active prefix and mask information.
- source ip-address
Dumps source IP address information.
- group mcast-address
Dumps the group multicast address bindings.
- rd rd
Dumps information for the route distinguisher.
- vc-type vc-type
Dumps information for the specified VC type.
- vc-id vc-id
Dumps information for the specified VC-ID.
- agi agi
Specifies the Attachment Group identifier TLV associated with this service FEC.
- saii-type2 global-id:prefix:ac-id
Dumps Source Attachment Individual Identifier (SAII) information.
- taii-type2 global-id:prefix:ac-id
Dumps Target Attachment Individual Identifier (TAII)
- svc-fec-type
Specifies the FEC type.
Platforms
All
Output
LDP FEC Output
Sample OutputA:Dut-A# tools dump router ldp fec root 10.20.1.3 source 10.0.101.10 group
192.168.1.1 inner-root 10.20.1.6
P2MP: root: 10.20.1.3, T: 7, L: 21 (InnerRoot: 10.20.1.6 T: 3, L:8, Src:
10.0.101.10, Grp: 192.168.1.1)
Create Time : 01/27/16 16:39:04.097 (elapsed: 0d 03:20:24)
Last Mod. Time: 01/27/16 16:39:04.097 (elapsed: 0d 03:20:24)
FEC Flags : Pop UprStitched
TunlIfId: 73728 (OperState : up)
LSP ID : 0
LSP ID Acct. : 0
isIngressMttm : No HasLeaf : Yes
isIngrItermdte: No
CanProgIngress: No
InPhopFrr : No
isStitchedUpr : Yes
RslvdPhop(p) : 10.20.1.2:0 (seqNum 2)
RslvdPhop(b) : 0.0.0.0:0 (seqNum 0)
pri Upstream : 10.20.1.2:0, AdvLabel 262139
mbb Upstream : None
bkp Upstream : None
AdvInLabel(p) : 262139
AdvInLabel(b) : 0
PrgInLabel(p) : 1
Num Resolved Nhops : 1
Num MBB Req. Nhops : 0
Num Programmed Nhops : 1
Programmed Nhop[01] : 0.0.0.0:0, OutLabel 0 (Leaf)(StitchedFec)
Metric : 0 Mtu : 0
Num of Peers : 1
FEC Peer: 10.20.1.2:0
Peer Flags: none (0x0)
ModTime : 01/27/16 16:39:04.097 (elapsed.: 0d 03:20:24)
->Num Egress Labels:
None
<-Num Ingress Labels:
<- (Label: 262139 Status: UsePop)
Rej Status: OK
Flow Label Tx: no, Rx: no
Flow Label Tx Sent: no, Rx Sent: no
<Resolved as CUR Upstream>
tools dump router ldp fec prefix 10.20.1.1/32
Prefix: 10.20.1.1/32
Create Time : 06/08/20 13:06:49.980 (elapsed: 0d 00:13:42)
Last Mod. Time: 06/08/20 13:19:51.740 (elapsed: 0d 00:00:40)
FEC Flags : Push Swap Ttm PropTtlLcl PropTtlTra Frr
FEC typedFlags: NeedTtm
default label : 524283
LSP ID : 65537
LSP ID Acct. : 13
IsResolved : Yes IsLocal: No IsLocalMHSec: No RsvldAsNLStitch: No
isStatic: No isMate: No
IsOverTunnel/Direct/Shortcut/CBF: No/No/No/none
inFrr: No
inLabel : 524283 metric: 100 bkp-metric: 200 mtu: 1556
Route : IPv4: 10.20.1.1/32 owner: ISIS(12)
: R-LFA PQ RtrId: 10.20.1.4 nhop: 1.0.35.5 ifIdx: 3 metric: 200
Resolution :
[01]: Next Hop: 1.0.35.5 Interface: 3 Inner Label: 524283 (Bkp)
owner : 10.20.1.5:0 egress label: 524281
[02]: Next Hop: 1.0.13.1 Interface: 2 Inner Label: 0
owner : 10.20.1.1:0 egress label: 524287
LDP FEC Output Fields describes the LDP FEC parameters output fields.
Label |
Description |
|---|---|
LSP ID |
Specifies the LSP identifier. |
Metric |
Specifies the metric type of the LSP. |
inLabel |
Specifies the incoming MPLS label on which to match. |
egress Label |
Specifies the egress label associated with this next-hop entry. |
fec-egress-stats
fec-egress-stats
Syntax
fec-egress-stats [ip-prefix/mask]
fec-egress-stats [active] [family]
Context
[Tree] (show>router>ldp fec-egress-stats)
Full Context
show router ldp fec-egress-stats
Description
This command displays LDP prefix FECs egress statistics.
Parameters
- ip-prefix
Specify information for the specified IP prefix. Host bits must be 0.
- mask
Specifies the address mask used to indicate the bits of an IP address that are being used for the subnet address.
- family
Displays either IPv4 or IPv6 LDP session information.
Platforms
All
Output
The following is an example of LDP FEC egress statistics information.
Sample Output*A:Dut-C>config>router>ldp# show router ldp fec-egress-stats 3ffe::a14:101/128
===============================================================================
LDP IPv6 FEC Egress Statistics
===============================================================================
-------------------------------------------------------------------------------
FEC Prefix/Mask : 3ffe::a14:101/128
-------------------------------------------------------------------------------
Collect Stats : Enabled Accounting Plcy. : Default
Admin State : Up
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
Aggregate Packets : 0
Aggregate Octets : 0
===============================================================================
LDP IPv6 FEC Egress Statistics: 1
===============================================================================
*A:Dut-C>config>router>ldp#
*A:Dut-C>config>router>ldp# show router ldp fec-egress-stats active
===============================================================================
LDP IPv4 FEC Egress Statistics
===============================================================================
No Matching Entries Found
===============================================================================
===============================================================================
LDP IPv6 FEC Egress Statistics
===============================================================================
-------------------------------------------------------------------------------
FEC Prefix/Mask : 3ffe::a14:101/128
-------------------------------------------------------------------------------
Collect Stats : Enabled Accounting Plcy. : Default
Admin State : Up
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
===============================================================================
LDP IPv6 FEC Egress Statistics: 1
===============================================================================
*A:Dut-C>config>router>ldp# show router ldp fec-egress-stats active ipv6
===============================================================================
LDP IPv6 FEC Egress Statistics
===============================================================================
-------------------------------------------------------------------------------
FEC Prefix/Mask : 3ffe::a14:101/128
-------------------------------------------------------------------------------
Collect Stats : Enabled Accounting Plcy. : Default
Admin State : Up
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets : 0
===============================================================================
LDP IPv6 FEC Egress Statistics: 1
===============================================================================
*A:Dut-C>config>router>ldp#
*A:Dut-C>config>router>ldp# show router ldp statistics-summary
===============================================================================
Statistics Summary
===============================================================================
LDP FEC IPv4 Prefix Egress statistics : 0
LDP FEC IPv6 Prefix Egress statistics : 1
===============================================================================
*A:Dut-C>config>router>ldp#
fec-egress-stats
Syntax
fec-egress-stats ip-prefix/mask [interval seconds] [repeat repeat] [ absolute | rate]
Context
[Tree] (monitor>router>ldp fec-egress-stats)
Full Context
monitor router ldp fec-egress-stats
Description
This command monitors egress statistics for LDP FEC prefixes.
Parameters
- ip-prefix/mask
Specifies information for the specified IP prefix and mask length.
- seconds
Configures the interval for each display in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
fec-originate
fec-originate
Syntax
fec-originate [ip-prefix/mask] [operation-type]
Context
[Tree] (show>router>ldp fec-originate)
Full Context
show router ldp fec-originate
Description
This command displays LDP static prefix FECs.
Parameters
- ip-prefix
Specify information for the specified IP prefix. Host bits must be 0.
- mask
Specifies the 32-bit address mask used to indicate the bits of an IP address that are being used for the subnet address.
- operation-type
Specify the operation type to display.
Platforms
All
Output
FEC Originate Output
FEC Originate Output Fields describes the FEC originate parameters output fields.
Label |
Description |
|---|---|
Prefix |
Specifies the static prefix FEC. |
NHType |
Specifies the type of next-hop represented by this row entry: unknown — The next-hop type has not been set. IP Addr — The next-hop is an IP address. pop — There is no next-hop (pop the label and route). |
NextHop |
The IP address of the next-hop. |
NHIfName |
The name of the next-hop. |
IngLabel |
Specifies the label that is advertised to the upstream peer. If this variable is set to the default value of 4294967295, the ingress label will be dynamically assigned by the label manager. |
EgrLabel |
Specifies the egress label associated with this next-hop entry. The LSR will swap the incoming label with the configured egress label. If this egress label has a value of 4294967295, the LSR will pop the incoming label. |
OprInLbl OperIngLabel |
Specifies the actual or operational value of the label that was advertised to the upstream peer. |
*A:SRU4>config>router>ldp# show router ldp fec-originate
===============================================================================
LDP Static Prefix FECs
===============================================================================
Prefix NHType NextHop IngLabel EgrLabel OperIngLabel
-------------------------------------------------------------------------------
10.1.0.0/16 Pop n/a -- -- 0
10.1.0.1/32 Pop n/a -- -- 0
10.1.0.2/32 Pop n/a -- -- 0
10.1.0.3/32 Pop n/a -- -- 0
10.1.0.4/32 Pop n/a -- -- 0
10.1.0.5/32 Pop n/a -- -- 0
10.1.0.6/32 Pop n/a -- -- 0
10.1.0.7/32 Pop n/a -- -- 0
10.1.0.8/32 Pop n/a -- -- 0
10.1.0.9/32 Pop n/a -- -- 0
...
10.251.0.0/16 Pop n/a -- -- 0
10.252.0.0/16 Pop n/a -- -- 0
10.253.0.0/16 Pop n/a -- -- 0
10.254.0.0/16 Pop n/a -- -- 0
-------------------------------------------------------------------------------
No. of FECs: 508
===============================================================================
*A:SRU4>config>router>ldp#
*A:Dut-C>config>router>ldp# show router ldp fec-originate 3ffe::0b0b:0101/128
===============================================================================
LDP IPv6 Static Prefix FECs
===============================================================================
Prefix NHType IngLbl EgrLbl OprInLbl
NextHop
NHIfName
-------------------------------------------------------------------------------
3ffe::b0b:101/128 Pop -- -- 0
n/a
--
-------------------------------------------------------------------------------
No. of IPv6 Static Prefix FECs: 1
===============================================================================
*A:Dut-C>config>router>ldp#
*A:Dut-C>config>router>ldp# show router ldp fec-originate 3ffe::0b0b:0101/128 pop
===============================================================================
LDP IPv6 Static Prefix FECs
===============================================================================
Prefix NHType IngLbl EgrLbl OprInLbl
NextHop
NHIfName
-------------------------------------------------------------------------------
3ffe::b0b:101/128 Pop -- -- 0
n/a
--
-------------------------------------------------------------------------------
No. of IPv6 Static Prefix FECs: 1
===============================================================================
*A:Dut-C>config>router>ldp#
*A:Dut-C>config>router>ldp# show router ldp fec-originate pop
===============================================================================
LDP IPv4 Static Prefix FECs
===============================================================================
Prefix NHType NextHop IngLbl EgrLbl OprInLbl
NHIfName
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP IPv6 Static Prefix FECs
===============================================================================
Prefix NHType IngLbl EgrLbl OprInLbl
NextHop
NHIfName
-------------------------------------------------------------------------------
3ffe::b0b:101/128 Pop -- -- 0
n/a
--
-------------------------------------------------------------------------------
No. of IPv6 Static Prefix FECs: 1
===============================================================================
*A:Dut-C>config>router>ldp# show router ldp fec-originate pop ipv6
===============================================================================
LDP IPv6 Static Prefix FECs
===============================================================================
Prefix NHType IngLbl EgrLbl OprInLbl
NextHop
NHIfName
-------------------------------------------------------------------------------
3ffe::b0b:101/128 Pop -- -- 0
n/a
--
-------------------------------------------------------------------------------
No. of IPv6 Static Prefix FECs: 1
===============================================================================
*A:Dut-C>config>router>ldp# show router ldp fec-originate pop ipv4
===============================================================================
LDP IPv4 Static Prefix FECs
===============================================================================
Prefix NHType NextHop IngLbl EgrLbl OprInLbl
NHIfName
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C>config>router>ldp#
fetch-ahs-log
fetch-ahs-log
Syntax
fetch-ahs-log period days file-url file-url
Context
[Tree] (tools>perform>esa fetch-ahs-log)
Full Context
tools perform esa fetch-ahs-log
Description
This command retrieves the ESA instance AHS log for a specified number of past days and copies it to a local or remote destination.
Parameters
- period days
- Specifies the number of past days for which AHS log events are retrieved.
- file-url file-url
- Specifies a local or remote destination for the AHS log.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s
Output
Use the following command to copy the AHS log to a local destination.
tools perform esa 1 fetch-ahs-log period 1 file-url cf3:/test.ahsUpdating (1 day) AHS Log @09/19/2022 21:28:25 on esa-1 ... DONE @ 09/19/2022
21:30:50 - File Name: /tmp/HPE_CZ21520FD6_20220919.ahs Size: 54104161 bytes
Transferring file /tmp/HPE_CZ21520FD6_20220919.ahs from esa-1 to cf3:/test.ahs ...
100%... DONE @09/19/2022 21:32:21 File Size: 54104161 bytes md5 cksum:
3f761a3a3d9c15b8ce3079ecb2015c3dUse the following command to copy the AHS log to a remote destination.
tools perform esa 1 fetch-ahs-log period 1 file-url ftp://exuser:expassword@192.0.2.1/exuser/Public/esa.ahsUpdating (1 day) AHS Log @09/19/2022 21:34:45 on esa-1 ... DONE @ 09/19/2022
21:37:10 - File Name: /tmp/HPE_CZ21520FD6_20220919.ahs Size: 54110350 bytes
Transferring file /tmp/HPE_CZ21520FD6_20220919.ahs from esa-1 to
ftp://exuser:expassword@192.0.2.1/exuser/Public/esa.ahs ...
100%... DONE @09/19/2022 21:38:37 File Size: 54110350 bytes md5 cksum:
ddf47e27b40dbd9f87a9348e6bb9b55dfib
fib
Syntax
fib slot-number [family] [ip-prefix/prefix-length [ longer]] [secondary] [qos] [accounting-class] [ all]
fib slot-number extensive [ip-prefix/prefix-length] [family] [ all]
fib slot-number [family] summary
fib slot-number nh-table-usage
fib all summary
Context
[Tree] (show>router fib)
Full Context
show router fib
Description
This command displays the active FIB entries for a specific IOM or line card.
Parameters
- slot-number
Displays routes only matching the specified chassis slot number.
- family
Displays the router IP interface table.
- ip-prefix/prefix-length
Displays FIB entries only matching the specified ip-prefix and length.
- longer
Displays FIB entries matching the ip-prefix/mask and routes with longer masks.
- secondary
Displays secondary VRF ID information.
- qos
Displays the QoS priority and fc values.
- accounting-class
Displays the accounting class information.
Note:Not all platforms support this parameter.
- all
Displays all information.
- summary
Displays summary FIB information for the specified slot number.
- nh-table-usage
Displays next-hop table usage.
Platforms
All
Output
The following output is an example of FIB information and FIB Fields describes the output fields for the router FIB settings.
Sample Output*A:Dut-C# show router fib 1 10.132.133.134/32
========================================================================
FIB Display
========================================================================
Prefix Protocol
NextHop
------------------------------------------------------------------------
10.132.133.134/32 OSPF
10.66.66.66 (loop7)
Next-hop type: tunneled, Owner: RSVP, Tunnel-ID: <out-ifindex-from-route>
------------------------------------------------------------------------
Total Entries : 1
------------------------------------------------------------------------
========================================================================
*A:Dut-C# show router fib 1 10.1.1.1/32
===============================================================================
FIB Display
===============================================================================
Prefix Protocol
NextHop
-------------------------------------------------------------------------------
10.1.1.1/32 BGP
10.20.1.1 (Transport:RSVP LSP:1)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C# show router fib 1
===============================================================================
FIB Display
===============================================================================
Prefix Protocol
NextHop
-------------------------------------------------------------------------------
10.1.2.0/24 ISIS
10.1.3.1 (to_Dut-A)
10.2.3.2 (to_Dut-B)
10.1.3.0/24 LOCAL
10.1.3.0 (to_Dut-A)
10.1.9.0/24 ISIS
10.1.3.1 (to_Dut-A)
10.2.3.0/24 LOCAL
10.2.3.0 (to_Dut-B)
10.2.9.0/24 ISIS
10.2.3.2 (to_Dut-B)
10.12.0.0/24 LOCAL
10.12.0.0 (itfToArborCP_02)
10.20.1.1/32 ISIS
10.1.3.1 (to_Dut-A)
10.20.1.2/32 ISIS
10.2.3.2 (to_Dut-B)
10.20.1.3/32 LOCAL
10.20.1.3 (system)
10.12.0.43/32 STATIC
vprn1:mda-1-1
10.12.0.44/32 STATIC
vprn1:mda-2-1
10.12.0.45/32 STATIC
vprn1:mda-2-2
10.12.0.46/32 STATIC
vprn1:mda-3-1
10.203.71.202/32 STATIC
10.12.0.2 (itfToArborCP_02)
-------------------------------------------------------------------------------
Total Entries : 15
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C>config>router>mpls>lsp# show router fib 1 10.3.0.1/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.3.0.1/32
Protocol : BGP
Indirect Next-Hop : 10.0.0.1
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 10.0.0.2 (RSVP tunnel:115)
ECMP-Weight : 1
Resolving Next-Hop : 10.0.0.2 (RSVP tunnel:61443)
ECMP-Weight : 1
Indirect Next-Hop : 10.0.1.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 30
Resolving Next-Hop : 10.0.0.3 (RSVP tunnel:94)
ECMP-Weight : 20
Resolving Next-Hop : 10.0.0.3 (RSVP tunnel:61442)
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C> show router fib 1 10.0.0.2/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.0.0.2/32
Protocol : OSPF
Next-Hop : 10.0.0.3 (RSVP tunnel:94)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 20
Next-Hop : 10.0.0.3 (RSVP tunnel:61442)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C> show router route-table 10.1.0.5/32 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 10.1.0.5/32
Protocol : STATIC
Age : 00h01m37s
Preference : 5
Next-Hop : 10.0.0.2 (RSVP tunnel:128)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 10
Next-Hop : 10.0.0.2 (RSVP tunnel:132)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 1
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:Dut-C> show router fib 1 10.1.0.5/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.1.0.5/32
Protocol : STATIC
Next-Hop : 10.0.0.2 (RSVP tunnel:128)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 10
Next-Hop : 10.0.0.2 (RSVP tunnel:132)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-B# show router fib 1 10.15.1.0/24
===============================================================================
FIB Display
===============================================================================
Prefix [Flags] Protocol
NextHop
-------------------------------------------------------------------------------
10.15.1.0/24 BGP
10.20.1.3 (Transport:SR)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B# show router fib 1 10.15.1.0/24 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.15.1.0/24
Protocol : BGP
Installed : Y
Indirect Next-Hop : 10.20.1.3
Label : 262123
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 10.20.1.3 (SR tunnel)
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C# show router fib 1 3ffe::100:100:100:6/128
===============================================================================
FIB Display
===============================================================================
Prefix [Flags] Protocol
NextHop
-------------------------------------------------------------------------------
3ffe::100:100:100:6/128 OSPF3
10.20.1.4 (Transport:RSVP LSP:1)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C# show router fib 1 3ffe::100:100:100:6/128 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 3ffe::100:100:100:6/128
Protocol : OSPF3
Installed : Y
Next-Hop : 10.20.1.4 (RSVP tunnel:1)
Label : 2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C# show router fib 1 extensive 200.200.200.200/32
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 200.200.200.200/32
Protocol : BGP
Indirect Next-Hop : 10.0.0.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 9
Resolving Next-Hop : 10.0.0.2
Interface : to_bridge_br2
ECMP-Weight : 1
Indirect Next-Hop : 192.0.2.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 5
Resolving Next-Hop : 192.0.2.2
Interface : to_bridge_br3
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C# show router fib 1 20.20.20.20/32
===============================================================================
FIB Display
===============================================================================
Prefix [Flags] Protocol
NextHop
-------------------------------------------------------------------------------
20.20.20.20/32 BGP
3ffe::a14:102 (Transport:SRV6-Policy:917510)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C# show router fib 1 20.20.20.20/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 20.20.20.20/32
Protocol : BGP
Installed : Y
Indirect Next-Hop : 3ffe::a14:102
Label : 67
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 3ffe::a14:102 (SRV6-Policy tunnel:917510)
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
Label |
Description |
|---|---|
Prefix [Flags] |
The prefix |
Protocol |
The routing protocol |
NextHop |
The next-hop IP address |
Total Entries |
The total number of entries |
Dest Prefix |
The destination prefix |
Installed |
The installed indicator (Y or N) |
Label |
The label number |
QoS |
The QoS value |
Source-Class |
The source class |
Dest-Class |
The destination class value |
ECMP-Weight |
The ECMP weight value |
fib
Syntax
fib slot-number [{ipv4 | ipv6}] summary
Context
[Tree] (tools>dump>router fib)
Full Context
tools dump router fib
Description
This command configures the dump tools for FIB information for a specific IOM.
Parameters
- slot-number
Specifies the slot number.
- ipv4 | ipv6
Specifies the IPv4 or IPv6 addresses.
- summary
Displays summary FIB information for the specified slot number.
Platforms
All
Output
The following output is an example of FIB summary information.
Sample Output*A:Dut-F# tools dump router fib 1 summary
===============================================================================
FIB Summary
===============================================================================
Active
-------------------------------------------------------------------------------
Static 0
Direct 3
HOST 0
BGP 0
BGP VPN 0
BGP EVPN 0
BGP LABEL 0
OSPF 0
OSPFv3 0
ISIS 1
RIP 0
RIP_NG 0
LDP 0
Aggregate 0
Sub Mgmt 0
VPN Leak 0
TMS 0
NAT 0
Managed 0
Periodic 0
-------------------------------------------------------------------------------
Total Installed 4
===============================================================================
fib-telemetry
fib-telemetry
Syntax
fib-telemetry label [label]
fib-telemetry route [family]
fib-telemetry route [ip-prefix/prefix-length]
fib-telemetry tunnel [family]
fib-telemetry tunnel [ip-prefix/prefix-length]
Context
[Tree] (show>router fib-telemetry)
Full Context
show router fib-telemetry
Description
This command displays FIB telemetry information.
Parameters
- label
Specifies the label value.
- family
Specifies the IPv4 or IPv6 address FIB telemetry route or tunnel family.
- ip-prefix/prefix-length
Displays FIB telemetry route or tunnel entries only matching the specified IP prefix and length.
Platforms
All
Output
The following output is an example of FIB telemetry information.
Sample Output*A:Dut-B>config>service# /show router fib-telemetry label
===============================================================================
FIB Telemetry Labels
===============================================================================
Label Owner LastUpdt
Primary NextHop[If]/TnlId Weight GrpId PriActv
Pushed Labels
Backup NextHop[If]/TnlId
Pushed Labels
-------------------------------------------------------------------------------
30044 RIB-API 02/07/2020 23:44:51
1.2.3.3 1 2 Yes
30055
1.2.3.33
30255
-------------------------------------------------------------------------------
Number of Entries : 1
===============================================================================
*A:Dut-C>config>system# /show router fib-telemetry route
===============================================================================
Legend -
Flags : b - backup, i - indirect, l - LFA
===============================================================================
FIB Telemetry Routes
===============================================================================
Dest Prefix Owner
FIB Update Time
NextHop [If/TnlId] Flags
-------------------------------------------------------------------------------
1.1.2.0/24 OSPF
02/07/2020 23:43:53
1.2.3.2 [to_Dut-B]
-------------------------------------------------------------------------------
Number of Entries : 1
===============================================================================
*A:Dut-C>config>system#
*A:Dut-C>config>system# /show router fib-telemetry route 3ffe::101:200/120
===============================================================================
Legend -
Flags : b - backup, i - indirect, l - LFA
===============================================================================
FIB Telemetry Routes
===============================================================================
Dest Prefix Owner
FIB Update Time
NextHop [If/TnlId] Flags
-------------------------------------------------------------------------------
3ffe::101:200/120 OSPF3
02/07/2020 23:43:55
fe80::200:ff:fe00:2 [to_Dut-B]
-------------------------------------------------------------------------------
Number of Entries : 1
===============================================================================
*A:Dut-C>config>system#
*A:Dut-A# /show router fib-telemetry tunnel
===============================================================================
Legend -
Flags : a - active, b - backup, l - LFA
===============================================================================
FIB Telemetry Tunnels
===============================================================================
Dest Prefix Owner Pref
FIB Update Time TnlId TnlInst
NextHop [If/TnlId] GrpId Weight Flg
-------------------------------------------------------------------------------
10.20.1.3/32 RSVP 7
02/07/2020 23:44:07 1 0
1.1.2.2 [to_Dut-B] 0 0 a
10.21.1.3/32 RIB-API 102
02/07/2020 23:44:42 1015813 0
1.1.2.2 [to_Dut-B] 4 0 a
1.1.2.22 [to_Dut-B] 4 0 b
-------------------------------------------------------------------------------
Number of Entries : 2
===============================================================================
*A:Dut-A# /show router fib-telemetry tunnel 10.21.1.3/32
===============================================================================
Legend -
Flags : a - active, b - backup, l - LFA
===============================================================================
FIB Telemetry Tunnels
===============================================================================
Dest Prefix Owner Pref
FIB Update Time TnlId TnlInst
NextHop [If/TnlId] GrpId Weight Flg
-------------------------------------------------------------------------------
10.21.1.3/32 RIB-API 102
02/07/2020 23:44:42 1015813 0
1.1.2.2 [to_Dut-B] 4 0 a
1.1.2.22 [to_Dut-B] 4 0 b
-------------------------------------------------------------------------------
Number of Entries : 1
===============================================================================
*A:Dut-A#
Label |
Description |
|---|---|
Label |
The label number of the FIB entry |
Owner |
The owner (protocol name) of the label entry |
LastUpdt |
The time stamp of when the entry was last updated |
Primary NextHop[If]/TnlId |
The primary path next-hop IP or tunnel ID or interface |
Weight |
The normalized ECMP weight associated with the next-hop |
GrpId |
The next-hop group ID |
PriActv |
The boolean value (YES or NO) that indicates whether the primary path is active or not |
Pushed Labels |
The pushed labels number |
Backup NextHop[If]/TnlId |
The backup path next-hop IP or tunnel ID or interface |
Number of Entries |
The total number of displayed labels |
Flags |
The flags:
|
Dest Prefix |
The destination IP prefix of the route FIB entry |
Owner |
The protocol owner (routing protocol) of the FIB entry |
FIB Update Time |
The time stamp of when the route was last updated in FIB |
NextHop [If/TnlId] |
The IP address of the next-hop and interface name or tunnel ID |
Number of Entries |
The total number of displayed routes |
Flags |
The flags:
|
Dest Prefix |
The destination IP prefix of the FIB tunnel entry |
Owner |
The protocol owner of the FIB tunnel entry |
Pref |
The preference number that indicates the priority of the tunnel |
FIB Update Time |
The time stamp of when the tunnel was last updated in FIB |
TnlId |
The global tunnel ID |
TnlInst |
The tunnel instance of the type indicated by protocol |
Number of Entries |
The total number of displayed tunnels |
fid
fid
Syntax
fid [fid] fate-sharing
fid [fid] user-service
fid [fid] fdb
fid [fid] mfib [group-mac ieee-address]
fid [fid] mfib [isid isid]
Context
[Tree] (show>service>id>spb fid)
Full Context
show service id spb fid
Description
This command displays SPB control service FID information.
Parameters
- fid
A user service FID may be specified. All user service FIDs are displayed if the FID is not specified.
- fate-sharing
Displays fate-sharing information
- user-service
Specifies user VPLS information for each control VPLS per forwarding data-base identifier. A user service FID may be specified. All user service FIDs are displayed if the FID is not specified.
- fdb
Displays forwarding database (FDB) information
- mfib
Displays multicast forwarding information base (MFIB) information
- ieee-address
Specifies the 48-bit IEEE 802.3 group MAC address
- isid
Specifies the value of ISID of the group MAC address of this entry
Platforms
All
Output
The following output is an example of service SPB FID fare sharing information.
Sample Output*A:Dut-A# show service id 100001 spb fid fate-sharing
===============================================================================
Control service fate-shared sap/sdp-bind information
===============================================================================
Control Control Sap/ FID User User Sap/
SvcId SdpBind SvcId SdpBind
-------------------------------------------------------------------------------
500 1/1/20:500 502 502 1/1/20:502
===============================================================================
*A:Dut-A# show service id 100001 spb fid fdb
===============================================================================
Control service FDB information
===============================================================================
Fid MacAddr UCast Source MCast Source
Last Update Last Update
-------------------------------------------------------------------------------
1 00:10:00:01:00:01 local local
04/04/2012 15:11:24 04/04/2012 15:11:24
1 00:10:00:01:00:02 1/2/2:1.1 1/2/2:1.1
04/04/2012 15:51:45 04/04/2012 15:51:45
1 00:10:00:01:00:03 1/2/3:1.1 1/2/3:1.1
04/04/2012 15:51:56 04/04/2012 15:51:56
1 00:10:00:01:00:04 1/2/2:1.1 1/2/2:1.1
04/04/2012 15:52:11 04/04/2012 15:52:11
-------------------------------------------------------------------------------
Entries found: 4
===============================================================================
*A:Dut-A# show service id 100001 spb fid mfib
===============================================================================
Control service MFIB information
===============================================================================
FID MacAddr ISID Source Last Update
-------------------------------------------------------------------------------
1 01:1E:83:00:27:11 10001 1/2/2:1.1 04/04/2012 15:51:45
1/2/3:1.1 04/04/2012 15:51:56
local 04/04/2012 15:42:44
100 01:1E:83:00:27:12 10002 1/2/2:1.1 04/04/2012 15:51:45
1/2/3:1.1 04/04/2012 15:51:56
local 04/04/2012 15:43:09
-------------------------------------------------------------------------------
Entries found: 6
===============================================================================
field
field
Syntax
field field-name
Context
[Tree] (show>app-assure>http-enrich field)
[Tree] (show>app-assure>group>http-enrich field)
Full Context
show application-assurance http-enrich field
show application-assurance group http-enrich field
Description
This command displays HTTP enrichment field information.
Parameters
- field-name
Specifies the field name, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
fields
fields
Syntax
fields
Context
[Tree] (show>app-assure>http-enrich fields)
Full Context
show application-assurance http-enrich fields
Description
This command displays HTTP enrichment fields.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
file
file
Syntax
file provisioning-file-url [save-provision-file-destination file-url] [reboot-on-success]
Context
[Tree] (tools>perform>system>auto-node-provisioning file)
Full Context
tools perform system auto-node-provisioning file
Description
This command executes the auto-provisioning process. When the auto-provisioning process is executed using the file command, DHCP discovery and solicitation is not performed.
Parameters
- provisioning-file-url
Specifies the location of the provisioning file.
- file-url
Specifies the location to save the provisioning file.
- reboot-on-success
Reboots the router when the auto-provisioning process completes successfully.
Platforms
All
file-id
file-id
Syntax
file-id [log-file-id]
Context
[Tree] (show>log file-id)
Full Context
show log file-id
Description
This command displays event file log information.
If no command line parameters are specified, a summary output of all event log files is displayed.
Specifying a file ID displays detailed information on the event file log.
Parameters
- log-file-id
Displays detailed information on the specified event file log.
Platforms
All
Output
The following is an example of log file summary information.
The following table describes the output fields for a log file summary.
Sample outputA:ALA-1# show log file-id
=================================================================
File Id List
=================================================================
name
file-id rollover retention admin backup oper
location location location
-----------------------------------------------------------------
3
3 60 4 cf1: cf2: cf1:
event-logs-abc
7 1440 12 cf1: none none
some-logs
10 1440 12 cf3: cf2: cf1:
=================================================================
A:ALA-1#
A:ALA-1# show log file-id 10
=================================================================
File Id List
=================================================================
name
file-id rollover retention admin backup oper
location location location
-----------------------------------------------------------------
some-logs
10 1440 12 cf3: cf2: cf1:
=================================================================
Description : logs of certain special events
=================================================================
File Id 10 Location cf1:
=================================================================
file name expired state
-----------------------------------------------------------------
cf1:\log\log0310-20210501-012205 yes complete
cf1:\log\log0310-20210501-014049 yes complete
cf1:\log\log0310-20210501-015344 yes complete
cf1:\log\log0310-20210501-015547 yes in progress
=================================================================
A:ALA-1#
Label |
Description |
|---|---|
name |
Displays the string name of the log file policy |
file-id |
Displays the log file ID |
rollover |
Displays the rollover time for the log file, which is how long in between partitioning of the file into a new file |
retention |
Displays the retention time for the file in the system, which is how long the file will be retained in the file system |
admin location |
Displays the primary flash device specified for the file location none — indicates no specific flash device is specified |
oper location |
Displays the actual flash device on which the log file exists |
file name |
Displays the complete pathname of the file associated with the log ID |
expired |
Indicates whether the retention period for this file has passed |
state |
in progress — Indicates the current open log file complete — Indicates the old log file |
file-transmission-profile
file-transmission-profile
Syntax
file-transmission-profile
file-transmission-profile name
file-transmission-profile name associations
Context
[Tree] (show>system file-transmission-profile)
Full Context
show system file-transmission-profile
Description
This command displays file transmission profile information.
Parameters
- name
Specifies the file transmission profile name, up to 32 characters.
Platforms
All
files
files
Syntax
files [running | finished] [detail]
Context
[Tree] (show>call-trace files)
Full Context
show call-trace files
Description
This command gives an overview of all the files in use by the call-trace module, either for running or finished jobs.
Parameters
- running
Displays the active jobs that are tracing events triggered by the host being monitored.
- finished
Displays the jobs that have already finished and not tracing events generated by the host anymore.
- detail
Displays detailed information about the files.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output displays call trace local log files information.
Sample OutputNode# show call-trace files
===============================================================================
Call trace files of running jobs
===============================================================================
File path File size
(bytes)
-------------------------------------------------------------------------------
cf1-A:/calltrace/running/mac_00-02-00-00-00-19_160119_1557.pcap 1575
-------------------------------------------------------------------------------
No. of call trace files of running jobs: 1
===============================================================================
===============================================================================
Call trace files of finished jobs
===============================================================================
File path File size
(bytes)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of call trace files of finished jobs: 0
===============================================================================
Call Trace Field Descriptions describes call trace output fields.
Field |
Description |
|---|---|
File path |
The compact flash (CF) configuration to store call trace files. |
File size |
The total size of call-trace files on the specified compact flash card |
No. of call trace files running jobs |
The total number of active trace call files running jobs |
No. of call trace files of finished jobs |
The total number of finished trace call files jobs |
filter
filter
Syntax
filter [subscriber sub-ident-string] [origin origin]
Context
[Tree] (show>service>active-subscribers filter)
Full Context
show service active-subscribers filter
Description
This command displays active subscriber filter information.
Parameters
- sub-ident-string
Specifies the subscriber ID of the active subscriber, up to 32 characters.
- origin
Specifies the origin of the active subscriber.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following is an example of active subscriber’s filter information.
Sample Output*A:eng-BNG-2# show service active-subscribers filter
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber user_1
(no-prof)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:1/1/20:841 - sla:no-prof
-------------------------------------------------------------------------------
IP Address
MAC Address Session Origin Svc Fwd
-------------------------------------------------------------------------------
192.168.0.14
00:00:10:10:12:13 N/A DHCP 1000 Y
===============================================================================
IP Filter (ingress)
===============================================================================
Filter Id : 50 Applied : Yes
Scope : Template Def. Action : Forward
Type : Normal
System filter : Unchained
Radius Ins Pt : n/a
CrCtl. Ins Pt : n/a
RadSh. Ins Pt : n/a
PccRl. Ins Pt : n/a
Entries : 2
Description : (Not Specified)
Filter Name : 50
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
No Match Criteria Found for this host
===============================================================================
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of active subscribers : 1
===============================================================================
filter
Syntax
filter
Context
[Tree] (show filter)
Full Context
show filter
Description
Commands in this context display IP/MAC filter and counter related information.
Platforms
All
filter
Syntax
filter
Context
[Tree] (show>li filter)
Full Context
show li filter
Description
This command displays LI mirror filter configuration and operation information.
Platforms
All
filter
Syntax
filter
Context
[Tree] (clear filter)
Full Context
clear filter
Description
Commands in this context clear the filter entities.
Platforms
All
filter
Syntax
filter
Context
[Tree] (clear>li filter)
Full Context
clear li filter
Description
This command clears LI mirror filter configuration and operation information.
Platforms
All
filter
Syntax
filter
Context
[Tree] (tools>dump filter)
Full Context
tools dump filter
Description
Commands in this context dump filter information.
Platforms
All
filter
Syntax
filter
Context
[Tree] (tools>perform filter)
Full Context
tools perform filter
Description
Commands in this context perform filter operations.
Platforms
All
filter
Syntax
filter
Context
[Tree] (monitor filter)
Full Context
monitor filter
Description
Commands in this context configure criteria to monitor IP and MAC filter statistics.
Platforms
All
filter-id
filter-id
Syntax
filter-id [filter-id]
Context
[Tree] (show>service>id>log filter-id)
Full Context
show service id log filter-id
Description
This command displays event file log information.
If no command line parameters are specified, a summary output of all event log files is displayed.
Specifying a file ID displays detailed information on the event file log.
Parameters
- filter-id
Specifies the filter policy.
Platforms
All
Output
Filter-ID Field Descriptions describes the output fields for a log file summary.
|
Label |
Description |
|---|---|
|
file-id |
The log file ID. |
|
rollover |
The rollover time for the log file which is how long in between partitioning of the file into a new file. |
|
retention |
The retention time for the file in the system which is how long the file should be retained in the file system. |
|
admin location |
The primary flash device specified for the file location. n/a — Indicates no specific flash device was specified. |
|
backup location |
The secondary flash device specified for the file location if the admin location is not available. n/a — Indicates that no backup flash device was specified. |
|
oper location |
The actual flash device on which the log file exists. |
|
file-id |
The log file ID. |
|
rollover |
The rollover time for the log file which is how long in between partitioning of the file into a new file. |
|
retention |
The retention time for the file in the system which is how long the file should be retained in the file system. |
|
file name |
The complete pathname of the file associated with the log ID. |
|
expired |
Indicates whether or not the retention period for this file has passed. |
|
state |
In progress — Indicates the current open log file. Complete —Indicates the old log file. |
filter-id
Syntax
filter-id [filter-id]
Context
[Tree] (show>log filter-id)
Full Context
show log filter-id
Description
This command displays event log filter policy information.
Parameters
- filter-id
Displays detailed information on the specified event filter policy ID.
Platforms
All
Output
The following is an example of event filter log information.
Event Log Filter Detail Output Fields describes the output fields for event log filter summary information.
Sample Output*A:ALA-48>config>log# show log filter-id
=============================================================================
Log Filters
=============================================================================
Filter Applied Default Description
Name/ Action
Id
-----------------------------------------------------------------------------
1
1 no forward
5
5 no forward
10
10 no forward
1001
1001 yes drop Collect events for Serious Errors Log
=============================================================================
*A:ALA-48>config>log#
*A:ALA-48>config>log# show log filter-id 1001
==========================================================================
Log Filter
==========================================================================
Filter-id : 1001 Applied : yes Default Action: drop
Filter-name : 1001
Description : Collect events for Serious Errors Log
--------------------------------------------------------------------------
Log Filter Match Criteria
--------------------------------------------------------------------------
Entry-id : 10 Action : forward
Application : Operator : off
Event Number : 0 Operator : off
Severity : major Operator : greaterThanOrEqual
Subject : Operator : off
Match Type : exact string :
Router : Operator : off
Match Type : exact string :
Description : Collect only events of major severity or higher
--------------------------------------------------------------------------
==========================================================================
*A:ALA-48>config>log#
Event Log Filter Detailed Output
Event Log Filter Detail Output Fields describes the output fields for detailed event log filter information.
Label |
Description |
|---|---|
Filter Name/Id |
The event log filter name or ID. |
Applied |
no — The event log filter is not currently in use by a log ID. yes — The event log filter is currently in use by a log ID. |
Default Action |
drop — The default action for the event log filter is to drop events not matching filter entries. forward — The default action for the event log filter is to forward events not matching filter entries. |
Description (Filter-id) |
The description string for the filter ID. |
Log Filter Match Criteria Output Fields describes the output fields for log filter match criteria information.
Label |
Description |
|---|---|
Entry-id |
The event log filter entry ID. |
Action |
default — There is no explicit action for the event log filter entry and the filter’s default action is used on matching events. drop — The action for the event log filter entry is to drop matching events. forward — The action for the event log filter entry is to forward matching events. |
Description (Entry-id) |
The description string for the event log filter entry. |
Application |
The event log filter entry application match criterion. |
Event Number |
The event log filter entry application event ID match criterion. |
Severity |
cleared — The log event filter entry application event severity cleared match criterion. indeterminate — The log event filter entry application event severity indeterminate match criterion. critical — The log event filter entry application event severity critical match criterion. major — The log event filter entry application event severity cleared match criterion. minor — The log event filter entry application event severity minor match criterion. warning — The log event filter entry application event severity warning match criterion. |
Subject |
Displays the event log filter entry application event ID subject string match criterion. |
Router |
Displays the event log filter entry application event ID router router-instance string match criterion. |
Operator |
There is an operator field for each match criteria: application, event number, severity, and subject. equal — Matches when equal to the match criterion. greaterThan — Matches when greater than the match criterion. greaterThanOrEqual — Matches when greater than or equal to the match criterion. lessThan — Matches when less than the match criterion. lessThanOrEqual — Matches when less than or equal to the match criterion. notEqual — Matches when not equal to the match criterion. off — No operator specified for the match criterion. |
firewall
firewall
Syntax
firewall
Context
[Tree] (show>router firewall)
Full Context
show router firewall
Description
This command displays firewall information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
firewall-hosts
firewall-hosts
Syntax
firewall-hosts [subscriber sub-ident] [ ip ipv6-address/prefix-length] [mac ieee-address] [firewall-policy policy-name] [router router-instance]
Context
[Tree] (show>service>nat firewall-hosts)
Full Context
show service nat firewall-hosts
Description
This command lists ESM hosts that have an active firewall. Configuring the optional parameters will narrow the scope of the list.
Parameters
- ieee-address
Specifies the MAC address of a host, in the format xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
- ipv6-address/prefix-length
Specifies the IPv6 prefix of a host.
- policy-name
Specifies the name of a firewall policy, up to 32 characters.
- router-instance
Specifies the ID of the router that contains the firewall domain.
- sub-ident
Specifies the subscriber identity string, up to 32 characters.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
firewall-policy
firewall-policy
Syntax
firewall-policy [policy-name [associations]]
Context
[Tree] (show>service>nat firewall-policy)
Full Context
show service nat firewall-policy
Description
This command lists the firewall policies that are present in the system.
Configuring the policy-name parameter will display all information for the specified policy.
Parameters
- associations
Keyword to display all configuration objects that use the specified firewall policy.
- policy-name
Specifies the name of a firewall policy, up to 32 characters.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of firewall policy information.
Sample OutputNode# show service nat firewall-policy
===============================================================================
Firewall policies
===============================================================================
Firewall policy Description
-------------------------------------------------------------------------------
firewall_dhcp6_0 IPv6 Firewall policy for DHCP6 on service Base
firewall_dhcp6_300 IPv6 Firewall policy for DHCP6 on service 300
firewall_dhcp6_4 IPv6 Firewall policy for DHCP6 on service 4
firewall_slaac_0 IPv6 Firewall policy for SLAAC on service Base
firewall_slaac_300 IPv6 Firewall policy for SLAAC on service 300
firewall_slaac_4 IPv6 Firewall policy for SLAAC on service 4
-------------------------------------------------------------------------------
No. of firewall policies: 6
===============================================================================
Node# show service nat firewall-policy "firewall_slaac_4"
===============================================================================
Firewall policy firewall_slaac_4
===============================================================================
Description : IPv6 Firewall policy for SLAAC on
service 4
Domain : domain_slaac_4
Router : vprn4
Filtering : endpointIndependent
Port forwarding range end : 1023
Session limit : 65535
Reserved sessions : 0
Session usage High Watermark (%) : (Not Specified)
Session usage Low Watermark (%) : (Not Specified)
ALG enabled : ftp
Prioritized forwarding classes : (Not Specified)
Timeout TCP established (s) : 7440
Timeout TCP transitory (s) : 240
Timeout TCP SYN (s) : 15
Timeout TCP TIME-WAIT (s) : 0
Timeout TCP RST (s) : 0
Timeout UDP mapping (s) : 300
Timeout UDP initial (s) : 15
Timeout UDP DNS (s) : 15
Timeout ICMPv6 Query (s) : 60
Timeout SIP Inactive Media (s) : 120
Timeout unknown protocol (s) : 300
UDP inbound refresh : false
TCP MSS Adjust : (Not Specified)
Unknown protocols : (Not Specified)
Last Mgmt Change : 01/23/2017 14:32:27
===============================================================================
Node# show service nat firewall-policy "firewall_slaac_4" associations
===============================================================================
Subscriber profile associations
===============================================================================
Subprof_1
-------------------------------------------------------------------------------
No. of subscriber profiles: 1
===============================================================================
flap-statistics
flap-statistics
Syntax
flap-statistics [{ip-prefix/mask [neighbor ip-addr] | group group-name | regex reg-exp | [policy policy-name}]
Context
[Tree] (clear>router>bgp flap-statistics)
Full Context
clear router bgp flap-statistics
Description
This command clears route flap statistics.
Parameters
- ip-prefix/mask
Clears route flap statistics for entries that match the specified IP prefix and mask length.
- ip-addr
Clears route flap statistics for entries received from the specified BGP neighbor.
- group-name
Clears route flap statistics for entries received from any BGP neighbors in the specified peer group. 32 characters maximum.
- reg-exp
Clears route flap statistics for all entries which have the regular expression and the AS path that matches the regular expression. 80 characters maximum.
- policy-name
Clears route flap statistics for entries that match the specified route policy. 32 characters maximum.
Platforms
All
flex-algo
flex-algo
Syntax
flex-algo [flex-algo-id] [level level] [ detail]
Context
[Tree] (show>router>isis flex-algo)
Full Context
show router isis flex-algo
Description
This command displays the IS-IS flexible algorithm information.
This command displays the flexible algorithms, the winning FAD for which the router is enabled and whether the local router is advertising a FAD.
When the keyword detail is used, all other FADs (beyond the winning FAD) advertised by any other router in the area are also displayed.
The displayed output can be filtered by using the flex-algo-id or level keywords.
Parameters
- flex-algo-id
Specifies the keyword filter to display output for the requested algorithm only.
- level
Displays the IS-IS area level information constrained to IS-IS level-1 or level-2 only.
- level
Specifies the IS-IS area level, it filters the displayed information constrained to IS-IS level-1 or level-2 only.
- detail
Displays not only the winning FAD information, but also all other FADs that the router has advertised in IS-IS.
Platforms
All
Output
The following output is an example of flexible algorithm information, and Flexible Algorithm Output Fields describes the output fields.
Sample Output*A:Dut-B# show router isis 0 flex-algo 128
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algos
===============================================================================
-------------------------------------------------------------------------------
Flex-Algo : 128
-------------------------------------------------------------------------------
Advertising FAD : My128
Participating : Yes
Loop-Free-Alternate : Disabled
L1 Oper state : UP
L2 Oper state : UP
Displaying Level 1 FAD Info
-------------------------------------------------------------------------------
FADs-count : 2
Selected FAD
Fad-Owner : 4900.0000.0002
Supported : Yes
Priority : 100
Metric Type : delay
Calculation Type : spf(0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
Level : L1
Displaying Level 2 FAD Info
-------------------------------------------------------------------------------
FADs-count : 1
Selected FAD
Fad-Owner : 4900.0000.0002
Supported : Yes
Priority : 100
Metric Type : delay
Calculation Type : spf(0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
Level : L2
-------------------------------------------------------------------------------
FAD: Flexible Algorithm Definition
Fad Flags: M = Prefix Metric
===============================================================================
*A:Dut-B#
*A:Dut-B#show router isis 0 flex-algo detail
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algos (detail)
===============================================================================
-------------------------------------------------------------------------------
Flex-Algo : 128
-------------------------------------------------------------------------------
Advertising FAD : My128
Participating : Yes
Loop-Free-Alternate : Disabled
L1 Oper state : UP
L2 Oper state : UP
Displaying Level 1 FAD Info
-------------------------------------------------------------------------------
FADs-count : 2
Selected FAD
Fad-Owner : 4900.0000.0002
Supported : Yes
Priority : 100
Metric Type : delay
Calculation Type : spf(0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
Level : L1
Other FADs
Fad-Owner : 4900.0000.0004
Supported : Yes
Priority : 50
Metric Type : delay
Calculation Type : spf(0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
Level : L1
Displaying Level 2 FAD Info
-------------------------------------------------------------------------------
FADs-count : 1
Selected FAD
Fad-Owner : 4900.0000.0002
Supported : Yes
Priority : 100
Metric Type : delay
Calculation Type : spf(0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
Level : L2
Other FADs
-------------------------------------------------------------------------------
FAD: Flexible Algorithm Definition
Fad Flags: M = Prefix Metric
===============================================================================
*A:Dut-B>show>router>isis#
Label |
Description |
|---|---|
Flex-Algo |
The flexible algorithm number |
Advertising FAD |
The FAD name when the local router is advertising a FAD |
Participating |
The flexible algorithm participation is enabled |
Loop-Free-Alternate |
Displays Loop-Free-Alternates; if enabled, then the configuration is inherited from base SPF |
L1 Oper State |
Displays the L1 operational flexible algorithm state |
L2 Oper State |
Displays the L2 operational flexible algorithm state |
FADs-Count |
Displays the number of FADs in the area available to the router |
FAD-Owner |
Displays the winning FAD owner |
Supported |
Displays local router support for the flexible algorithm definition that is advertised in the FAD |
Priority |
Displays the FAD priority; It is the tiebreaker when multiple FADs are received |
Metric Type |
The metric used by the winning FAD igp — the IGP metric is used te-metric — the TE metric is used delay — the delay metric is used |
Calculation Type |
Displays the calculation type; for SPF a zero value is only defined |
Exclude |
The list of administrative groups for links to be excluded from the flexible algorithm topology graph |
Include Any |
The list of administrative groups for links to be included in the flexible algorithm topology graph |
Include All |
The list of administrative groups for links where all administrative groups have to match to be included in the flexible algorithm topology graph |
Fad Flags |
Displays the FAD Flags; the M-flag is used for inter-area; when set, the metric must be used for inter-area traffic to avoid loops and blackhole traffic on ABR/ASBR |
Level |
The IS-IS area level where the FAD is received |
flex-algo
Syntax
flex-algo [flex-algo-id] [area area-id] [detail]
Context
[Tree] (show>router>ospf flex-algo)
Full Context
show router ospf flex-algo
Description
This command displays OSPFv2 flexible algorithm information, which includes the flexible algorithms, the winning FAD for which the router is enabled, and whether the local router is advertising a FAD.
The displayed output can be filtered using either the area-id or flex-algo-id keywords.
Parameters
- flex-algo-id
Specifies the keyword filter to display output for the requested algorithm only.
- area-id
Specifies the OSPFv2 area to display output.
- area
Displays the information constrained to a particular OSPFv2 area.
- detail
Displays the winning FAD information and all other FADs that the router has advertised in OSPFv2.
Platforms
All
Output
The following output is an example of flexible algorithm information, and Flexible Algorithm Output Fields describes the output fields.
Sample Output*A:Dut-C# show router ospf flex-algo detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Flex-Algos (detail)
===============================================================================
-------------------------------------------------------------------------------
Flex-Algo : 128
-------------------------------------------------------------------------------
Advertising FAD : Algo_OSPF_128
Participating : Yes
Loop-Free-Alternate : Disabled
Oper state
Area 0.0.0.0 : UP
Displaying Area 0.0.0.0 FAD Info
-------------------------------------------------------------------------------
FADs-count : 1
Selected FAD
Fad-Owner : 3.3.3.3
Supported : Yes
Priority : 50
Metric Type : igp (0)
Calculation Type : spf (0)
Exclude : 0x0
Include Any : 0x0
Include All : 0x0
Fad Flags : M
-------------------------------------------------------------------------------
FAD: Flexible Algorithm Definition
Fad Flags: M = Prefix Metric
===============================================================================
*A:Dut-C#
Label |
Description |
|---|---|
Flex-Algo |
The flexible algorithm number |
Advertising FAD |
The FAD name when the local router is advertising a FAD |
Participating |
The flexible algorithm participation is enabled |
Loop-Free-Alternate |
Displays Loop-Free-Alternates; if enabled, then the configuration is inherited from base SPF |
Oper state Area |
The operational area state |
FADs-count |
Displays the number of FADs in the area available to the router |
FAD-Owner |
Displays the winning FAD owner |
Supported |
Displays local router support for the flexible algorithm definition that is advertised in the FAD |
Priority |
Displays the FAD priority which is the tiebreaker when multiple FADs are received |
Metric Type |
The metric used by the winning FAD igp — the IGP metric is used te-metric — the TE metric is used delay — the delay metric is used |
Calculation Type |
Displays the calculation type; for SPF, only a zero value is defined |
Exclude |
The list of administrative groups for links to be excluded from the flexible algorithm topology graph |
Include Any |
The list of administrative groups for links to be included in the flexible algorithm topology graph |
Include All |
The list of administrative groups for links where all administrative groups must match to be included in the flexible algorithm topology graph |
Fad Flags |
Displays the FAD flags. The M-flag is used for inter-area; when set, the metric must be used for inter-area traffic to avoid loops and blackhole traffic on ABR/ASBR. |
flexible-algorithm-definitions
flexible-algorithm-definitions
Syntax
flexible-algorithm-definitions [flex-algo fad-name]
Context
[Tree] (show>router flexible-algorithm-definitions)
Full Context
show router flexible-algorithm-definitions
Description
This command displays information about the locally configured FADs.
If flex-algo fad-name is specified as the output filter, only filtered FAD definitions are shown. If no output filter is specified, all configured FADs are shown.
Parameters
- flex-algo fad-name
Displays the configuration information for the specified FAD name.
Platforms
All
Output
The following output is an example of FAD information, and FAD Fields describes the output fields.
Sample Output*A:Dut-B# show router flexible-algorithm-definitions
===============================================================================
Flexible Algorithm Definitions
===============================================================================
-------------------------------------------------------------------------------
Flex-Algo: My128
-------------------------------------------------------------------------------
Admin State : Up
Description : This-is-My128-algo
Metric Type : delay
Priority : 100
Exclude : N.A.
Include Any : N.A.
Include All : N.A.
-------------------------------------------------------------------------------
Flex-Algo: MyFAD
-------------------------------------------------------------------------------
Admin State : Up
Description : (Not Specified)
Metric Type : igp
Priority : 100
Exclude : N.A.
Include Any : N.A.
Include All : N.A.
===============================================================================
*A:Dut-B#
*A:Dut-B# show router flexible-algorithm-definitions flex-algo "My128"
===============================================================================
Flexible Algorithm Definitions
===============================================================================
-------------------------------------------------------------------------------
Flex-Algo: My128
-------------------------------------------------------------------------------
Admin State : Up
Description : This-is-My128-algo
Metric Type : delay
Priority : 100
Exclude : N.A.
Include Any : N.A.
Include All : N.A.
===============================================================================
*A:Dut-B#
Label |
Description |
|---|---|
Flex-Algo |
FAD name |
Admin State |
Displays the administrative state of the FAD |
Description |
Displays a short description of the FAD |
Metric Type |
The metric type of the FAD igp — the IGP metric is used for the flexible algorithm graph te-metric — the TE metric is used for the flexible algorithm graph delay — the delay metric is used for the flexible algorithm graph |
Priority |
Displays the priority of the FAD; if the FAD is advertised, the priority is the tie-breaker used to determine the winning FAD; the higher the value the higher the priority |
Exclude |
Displays the list of link administrative groups to exclude from the construction of the flexible algorithm topological graph |
Include Any |
Displays the list of link administrative groups to include when constructing the flexible algorithm topological graph |
Include All |
Displays the list of link administrative groups that must be assigned to a single link to include in the construction of the flexible algorithm topological graph |
flood-table
flood-table
Syntax
flood-table [class class] [detail]
Context
[Tree] (tools>dump>wlan-gw>lanext>bd flood-table)
Full Context
tools dump wlan-gw lanext bd flood-table
Description
This command dumps the specified flood table entries for the specified HLE BD.
Parameters
- class
Specifies the source on which to filter the flood table entries.
- detail
Dumps detailed information for the flood table.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of flood table information.
Sample Outputtools>dump>wlan-gw>lanext>bd# flood-table detail
===============================================================================
MATCHED 2 FLOOD ENTRIES ON SLOT #2 MDA #1
===============================================================================
TUNNEL MDA : 2/1 VLAN : 100
TUNNEL PORT : 2/1/NAT-IN-IP TUNNEL ENCAP : 2049.1
TUNNEL SRC IP : 11.3.3.100
TUNNEL DST IP : 4.4.4.4
TUNNEL TYPE : GRE TUNNEL CLASS : ACCESS
GRE RAW HEADER : 1483014144
-------------------------------------------------------------------------------
TUNNEL MDA : 2/1 VLAN : N/A
TUNNEL PORT : 2/1/NAT-OUT-IP TUNNEL ENCAP : 2081.3
TUNNEL SRC IP : 2.2.2.2
TUNNEL DST IP : 44.44.44.1
TUNNEL TYPE : VXLAN TUNNEL CLASS : NETWORK
VXLAN VNI : 102
VXLAN PORT : 4789
-------------------------------------------------------------------------------
===============================================================================
flow-attribute
flow-attribute
Syntax
flow-attribute
Context
[Tree] (show>app-assure flow-attribute)
Full Context
show application-assurance flow-attribute
Description
This command displays flow attribute information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
flow-attribute
Syntax
flow-attribute detail
flow-attribute summary
Context
[Tree] (show>app-assure>group flow-attribute)
Full Context
show application-assurance group flow-attribute
Description
This command displays flow attribute information.
Parameters
- detail
Displays detailed information.
- summary
Displays summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following are examples of flow attribute information.
Flow Attributes Output Field Descriptions describes the flow attribute output fields.
Sample Outputshow application-assurance group 1:0 flow-attribute detail
===============================================================================
Application-Assurance Flow Attribute Detailed Statistics
===============================================================================
Type Octets Packets Flows
-------------------------------------------------------------------------------
Flow attribute : audio
Confidence : 0-19
From sub 1494 1 1
To sub 0 0 0
Confidence : 20-39
From sub 0 0 0
To sub 0 0 0
Confidence : 40-59
From sub 0 0 0
To sub 0 0 0
Confidence : 60-79
From sub 0 0 0
To sub 0 0 0
Confidence : 80-100
From sub 118251 1146 1
To sub 136584 1314 1
...
show application-assurance group 1:0 flow-attribute summary
=============================================================================
Application-Assurance Flow Attribute Statistics Summary
=============================================================================
Confidence
Type 0-19 20-39 40-59 60-79 80-100
-----------------------------------------------------------------------------
Flow attribute : audio
Total bytes 0.5% 0% 0% 0% 99.5%
Total packets 0% 0% 0% 0% 100%
Total flows 33.3% 0% 0% 0% 66.7%
-----------------------------------------------------------------------------
Flow attribute : video
Total bytes 100% 0% 0% 0% 0%
Total packets 100% 0% 0% 0% 0%
Total flows 100% 0% 0% 0% 0%
-----------------------------------------------------------------------------
Flow attribute : upload
Total bytes 100% 0% 0% 0% 0%
Total packets 100% 0% 0% 0% 0%
Total flows 100% 0% 0% 0% 0%
-----------------------------------------------------------------------------
Flow attribute : download
Total bytes 100% 0% 0% 0% 0%
Total packets 100% 0% 0% 0% 0%
Total flows 100% 0% 0% 0% 0%
-----------------------------------------------------------------------------
Flow attribute : encrypted
Total bytes 0% 0% 0% 0% 100%
Total packets 0% 0% 0% 0% 100%
Total flows 20.6% 0% 0% 0% 79.4%
-----------------------------------------------------------------------------
Flow attribute : abr_service
Total bytes 0% 0% 0% 0% 100%
Total packets 0% 0% 0% 0% 100%
Total flows 1.7% 0% 0% 0% 98.3%
-----------------------------------------------------------------------------
Flow attribute : real_time_communication
Total bytes 0% 0% 0% 0% 100%
Total packets 0% 0% 0% 0% 100%
Total flows 1.7% 0% 0% 0% 98.3%
=============================================================================
Label |
Description |
|---|---|
Flow attribute |
Displays information for a specific flow attribute. |
Confidence |
An indication of the certainty that an attribute applies to a flow. Displays the percentage of flows within each range of confidence levels for the attribute. |
Octets |
Number of octets in the confidence level range. |
Packets |
Number of packets in the confidence level range. |
Flows |
Number of flows in the confidence level range. |
Total bytes |
Percentage of the total bytes per confidence range for a specific flow attribute. |
Total packets |
Percentage of the total packets per confidence range for a specific flow attribute. |
Total flows |
Percentage of the total flows per confidence range for a specific flow attribute. |
flow-distribution
flow-distribution
Syntax
flow-distribution
Context
[Tree] (show>lag flow-distribution)
Full Context
show lag flow-distribution
Description
This command displays the allocated distribution of traffic flows.
Platforms
All
flow-ipv4
flow-ipv4
Syntax
flow-ipv4 [hunt] [aspath-regex reg-exp] [ community comm-id]
Context
[Tree] (show>router>bgp>routes flow-ipv4)
Full Context
show router bgp routes flow-ipv4
Description
This command displays BGP flow IPv4 routes.
Parameters
- reg-exp
Displays routes matching the specified regular expression, up to 80 characters.
- comm-id
Specifies the community ID, up to 72 characters.
Platforms
All
flow-ipv6
flow-ipv6
Syntax
flow-ipv6 [hunt] [aspath-regex reg-exp] [ community comm-id]
Context
[Tree] (show>router>bgp>routes flow-ipv6)
Full Context
show router bgp routes flow-ipv6
Description
This command displays BGP flow IPv6 routes.
Parameters
- reg-exp
Displays routes matching the specified regular expression, up to 80 characters.
- comm-id
Specifies the community ID, up to 72 characters.
Platforms
All
flow-record-search
flow-record-search
Syntax
flow-record-search aa-sub {esm sub-ident-string | sap sap-id | spoke-sdp sdp-id:vc-id | transit transit-aasub-name | mobile {imsi imsi-msisdn | msisdn imsi-msisdn | imei imei} apn apn-name | dsm mac mac-address | esm-mac esm-mac-name} [protocol protocol-name] [ application app-name] [app-group app-group-name] [flow-status flow-status] [start-flowid start-flowid] [ classified classified] [server-ip ip-address] [server-port port-num] [client-ip ip-address] [ bytes-tx kbytes] [flow-duration minutes] [max-count max-count] [search-type search-type] [ url file-url]
flow-record-search isa mda-id [protocol protocol-name] [application app-name] [app-group app-group-name] [ flow-status flow-status] [start-flowid start-flowid] [classified classified] [server-ip ip-address] [ server-port port-num] [client-ip ip-address] [bytes-tx kbytes] [flow-duration minutes] [ max-count max-count] [search-type search-type] [url file-url]
Context
[Tree] (tools>dump>app-assure>group flow-record-search)
Full Context
tools dump application-assurance group flow-record-search
Description
This command dumps application-assurance flow-records matching the specified criteria for a specific AA subscriber.
Parameters
- application app-name
Displays flows for the specified application name.
- app-group app-group-name
Displays flows for the specified application group.
- bytes-tx kbytes
Display flows with the specified minimum kilobytes.
- classified classified
Specifies the starting flow ID.
- client-ip ip-address
Display flows with the specified client IP address.
- dsm mac mac-address
Displays flows for the specified subscriber.
- esm sub-ident-string
Displays flows for the specified subscriber.
- esm-mac esm-mac-name
Displays flows for the specified ESM MAC.
- flow-duration minutes
Display flows with the specified minimum duration in minutes.
- flow-status flow-status
Displays only flows that are active or closed.
- max-count max-count
Specifies the maximum count of flows to display.
- protocol protocol-name
Displays flows for the specified protocol.
- sap sap-id
Displays flows for the specified SAP.
- search-type search-type
Specifies the level of detail displayed for flows that match the search criteria.
- server-ip ip-address
Display flows with the specified server IP address.
- server-port port-num
Display flows with the specified server port number.
- spoke-sdp sdp-id:vc-id
Displays flows for the specified spoke SDP.
- start-flowid start-flowid
Specifies the starting flow ID.
- transit transit-aasub-name
Displays flows for the specified transit subscriber.
- url file-url
Specifies the URL for the file to direct the search output to. The file may be local or remote.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following example displays flow record search information.
Sample Output*A:Dut-C# tools dump application-assurance group 74:40346 flow-record-search aa-sub esm-mac "diameter_esm-000100000002"
=====================================================
Application-Assurance flow record search, Version 1.0
Search Start Time: "01/13/2017 14:30:50" (UTC)
Search Criteria:
group[:partition]: 74:40346
aa-sub: diameter_esm-000100000002 (esm-mac)
protocol name: none specified
application name: none specified
app-group name: none specified
flow-status: none specified
start-flowId: none specified
classified: none specified
server-ip: none specified
server-port: none specified
client-ip: none specified
bytes-tx: none specified
flow-duration: none specified
max-count: none specified
search-type: default
=====================================================
FlowId Init Src-ip Dst-ip Ip-prot Src-prt Dst-prt Protocol
Application Pkts-tx Bytes-tx Pkts-disc Bytes-disc Time-ofp(UTC)
Time-olp(UTC)
124 yes 192.168.200.2 200.1.1.3 icmp 0 0 "non_tcp_udp" "ICMP" 1 42 0 0 "01/13/2017 14:27:06"
"01/13/2017 14:27:06"
300 no 192.168.200.2 200.1.1.3 icmp 0 0 "non_tcp_udp" "ICMP" 1 42 0 0 "01/13/2017 14:27:30"
"01/13/2017 14:27:30"
force
force
Syntax
force aps-id {protect | working} [number number]
Context
[Tree] (tools>perform>aps force)
Full Context
tools perform aps force
Description
This command forces a switch to either the protect or working circuit
Parameters
- aps-id
Specifies the APS ID.
- protect
This command clears a physical port that is acting as the protection circuit for the APS group.
- working
This command clears a physical port that is acting as the working circuit for this APS group.
- number
Specifies the APS channel number.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e
force
Syntax
force ring-index path {a | b}
Context
[Tree] (tools>perform>eth-ring force)
Full Context
tools perform eth-ring force
Description
This command forces a block on the ring port where the command is issued.
Parameters
- ring-index
Specifies the ring index.
- path
Displays information for a specific path.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
force
Syntax
force all-mc {active | standby}
force lag-id lag-id [sub-group sub-group-id] { active | standby}
force peer-mc ip-address {active | standby}
Context
[Tree] (tools>perform>lag force)
Full Context
tools perform lag force
Description
This command allows forcing the specified LAG, subgroup, all MC-LAGs, or remote peer for MC-LAGs to become active or standby when LAG runs in Active/Standby mode. To remove the forced condition, execute the tools perform lag clear-force command.
Parameters
- all-mc
Specifies all MC-LAGs.
- active
Specifies to become active.
- standby
Specifies to become standby.
- lag-id
Specifies the LAG ID.
- sub-group-id
Specifies the subscriber group ID.
- ip-address
Specifies the IP address.
Platforms
All
force
Syntax
force id tunnel-id
force lsp-name
Context
[Tree] (tools>perform>router>mpls>tp-tunnel force)
Full Context
tools perform router mpls tp-tunnel force
Description
This command performs a force switchover of the MPLS-TP LSP from the active path to the protect path.
Parameters
- tunnel-id
Specifies the tunnel number of the MPLS-TP LSP.
- lsp-name
Specifies name of the MPLS-TP LSP, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
force-partner-down
force-partner-down
Syntax
force-partner-down
Context
[Tree] (tools>perform>router>dhcp>server>pool>failover force-partner-down)
[Tree] (tools>perform>router>dhcp6>server>pool>failover force-partner-down)
[Tree] (tools>perform>router>dhcp6>server>failover force-partner-down)
[Tree] (tools>perform>router>dhcp>server>failover force-partner-down)
Full Context
tools perform router dhcp local-dhcp-server pool failover force-partner-down
tools perform router dhcp6 local-dhcp-server pool failover force-partner-down
tools perform router dhcp6 local-dhcp-server failover force-partner-down
tools perform router dhcp local-dhcp-server failover force-partner-down
Description
This command forces a DHCP server to transition from the COMMINICATIONS-INTERRUPTED state to the PARTNER-DOWN state.
It is important to note that this command should only be used if the remote DHCP server is out of service, else duplicate address allocations could occur.
In case of a communication failure between two redundant DHCP servers, the DHCP server transitions to the COMMUNICATIONS-INTERRUPTED state. In this state, the DHCP server allocates IP addresses for new leases from the local and address-driven address-ranges only. This prevents duplicate address allocations.
If during the partner-down-delay time, the communication with the remote DHCP server is not restored, then the DHCP server transitions to the PARTNER-DOWN state. In this state, the DHCP server also allocates IP addresses for new leases from the remote ranges. A DHCP server should only reach this state when the remote DHCP server is out of service, else IP address conflicts can occur.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
force-switch-path
force-switch-path
Syntax
force-switch-path [lsp lsp-name] [path path-name]
no force-switch-path lsp lsp-name
Context
[Tree] (tools>perform>router>mpls force-switch-path)
Full Context
tools perform router mpls force-switch-path
Description
Use this command to move from a standby path to any other standby path regardless of priority.
The no form of the command reverts to priority path.
Parameters
- lsp-name
Specifies an existing LSP name, up to 64 characters in length.
- path-name
Specifies the path name to which to move the specified LSP.
Platforms
All
force-switchover
force-switchover
Syntax
force-switchover tunnel-group local-group-id [ now] [to {master | standby}]
Context
[Tree] (tools>perform>redundancy>multi-chassis>mc-ipsec force-switchover)
Full Context
tools perform redundancy multi-chassis mc-ipsec force-switchover
Description
This command manually switches over the 7750 SR mc-ipsec mastership of specified tunnel-group.
Parameters
- local-group-id
Specifies the local tunnel-group id configured in the config>redundancy>multi-chassis> peer>mc-ipsec context.
- now
This optional parameter removes the prompt of confirmation.
- to {master | standby}
specifies the desired mastership state to be achieved following a forced switch between this tunnel group and its redundant peer. If the target state matches the current state when the switch is attempted, then no switch will occur.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
force-uplink-switch
force-uplink-switch
Syntax
force-uplink-switch client-port-id
Context
[Tree] (tools>perform>satellite force-uplink-switch)
Full Context
tools perform satellite force-uplink-switch
Description
This command forces traffic associated with the specified satellite client port to be switched away from the current uplink depending on which uplink is currently active.
Parameters
- client-port-id
Specifies the satellite client port associated with the port mapping, in the format esat- id/slot/port force.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
forced-single-sfm-overload
forced-single-sfm-overload
Syntax
[no] forced-single-sfm-overload
Context
[Tree] (tools>perform>redundancy forced-single-sfm-overload)
Full Context
tools perform redundancy forced-single-sfm-overload
Description
This command forces the single-sfm-overload state on or off.
Platforms
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS, VSR
forcerenew
forcerenew
Syntax
forcerenew svc-id service-id {ip ip-address[/mask] | mac ieee-address}
forcerenew {interface interface-name | sap sap-id | sdp sdp-id:vc-id} [ip ip-address[/mask] | mac ieee-address]
Context
[Tree] (tools>perform>subscr-mgmt forcerenew)
Full Context
tools perform subscriber-mgmt forcerenew
Description
This command forces the renewal of lease state and only applies to the 7450 ESS and 7750 SR.
In cases where the IPoE hosts resides in a private retail subnet VPRN, the MAC address must be used for the tools>perform>subscriber-mgmt>forcerenew command instead of the IP address.
Parameters
- service-id
Forces renewal of the lease state for the specified service ID.
- sap-id
Forces renewal of the lease state for the specified SAP.
- ip-address
Forces renewal of the lease state for the specified IP address.
- ieee-address
Forces renewal of the lease state for the specified MAC address.
- interface-name
Forces renewal of the lease state for the specified interface name.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
forwarding
forwarding
Syntax
forwarding [sub-domain sub-domain] [ bsl bsl] [neighbor-prefix ip-address] [si si]
Context
[Tree] (show>router>bier forwarding)
Full Context
show router bier forwarding
Description
This command shows the BIER forwarding table.
Parameters
- sub-domain
Specifies a sub-domain.
- bsl
Specifies a bit string length.
- ip-address
Specifies a neighbor-prefix in IP address format.
- si
Specifies an SI.
Platforms
All
Output
The following is an example of a BIER forwarding configuration. BIER Forwarding Fields provides BIER forwarding field descriptions.
Sample Output*A:Dut-A# show router bier forwarding sub-domain 0
===============================================================================
Neighbor
Nexthop
Interface
[SI]: Label
Forwarding Bit Mask
BFR-ID : Prefix
-------------------------------------------------------------------------------
===============================================================================
BIER Forwarding Database Sub-Domain 0 BSL 256
===============================================================================
10.20.1.2
10.180.1.2
ip-10.180.1.1
[0]: 1048556
0x0000000000000000000000000000000000000000000000000000000000000036
2 : 10.20.1.2
3 : 10.20.1.3
5 : 10.20.1.5
6 : 10.20.1.6
===============================================================================
Total (Sub-Domain 0): 1
===============================================================================
Total BIER Forwarding entries : 1
===============================================================================
*A:Dut-A#
Label |
Description |
|---|---|
Neighbor |
The neighbor IP address |
Nexthop |
The next-hop IP address |
Interface |
The egress interface name for the programmed tunnel |
[SI]:Label |
The SI and label. The BitString and the SI together determine the set of BFERs to which a given packet will be delivered. The label is the egress transport label used for the given SI/SD. |
Forwarding Bit Mask |
The BitString forwarding mask |
BFR-ID: Prefix |
The BFR ID and the prefix reachable through this SD/SI/BFR-ID |
forwarding-policies
forwarding-policies
Syntax
forwarding-policies
Context
[Tree] (clear>router>mpls forwarding-policies)
Full Context
clear router mpls forwarding-policies
Description
This command resets or clears statistics for forwarding policies.
Platforms
All
forwarding-policies
Syntax
forwarding-policies
Context
[Tree] (show>router>mpls forwarding-policies)
Full Context
show router mpls forwarding-policies
Description
Commands in this context display forwarding policies.
Platforms
All
forwarding-policies
Syntax
forwarding-policies
Context
[Tree] (monitor>router>mpls forwarding-policies)
Full Context
monitor router mpls forwarding-policies
Description
This command monitors statistics for MPLS forwarding policies.
Platforms
All
forwarding-policy
forwarding-policy
Syntax
forwarding-policy [policy] [detail]
Context
[Tree] (show>router>mpls>forwarding-policies forwarding-policy)
Full Context
show router mpls forwarding-policies forwarding-policy
Description
This command displays the MPLS forwarding policy information.
Parameters
- policy
Specifies the policy name.
- detail
Specifies detailed information.
Platforms
All
Output
MPLS Forward-policy Output Fields describes MPLS forward-policy output fields.
Label |
Description |
|---|---|
Policy Name |
Specifies the MPLS forwarding policy name. |
Binding Label |
Specifies the binding label number. |
Admin |
Specifies the administrative state (up | down). |
OperState |
Specifies the operational state (up | down). |
No. of Forwarding Policies |
Specifies the number of forwarding policies. |
Type |
Specifies the type. |
Binding Label |
Specifies the binding label number. |
Last Change |
Specifies the date and time of the last change. |
A*A:Dut-B>config>router>mpls# /show router mpls forwarding-policies forwarding-
policy
===============================================================================
MPLS Forwarding Policy
===============================================================================
Policy Name Binding Label Admin Oper
-------------------------------------------------------------------------------
smallername!pol1 0 Down Down
policy1-32chars-policy1-32chars 33 Up Down
fwdpolicyName!!ThisNameIs32chars 111 Up Down
-------------------------------------------------------------------------------
No. of Forwarding Policies: 3
===============================================================================
*A:Dut-B>show>router>mpls# forwarding-policies forwarding-policy detail
===============================================================================
Forwarding Policy Status (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Label
-------------------------------------------------------------------------------
Policy Name : smallername!pol1
Admin State : Down Oper State : Down
Binding Label : 0 Preference : 2
Binding Label : 0
Last Change : 03/28/2018 23:52:45
Ingress Stats : Disabled
-------------------------------------------------------------------------------
Type : Label
-------------------------------------------------------------------------------
Policy Name : policy1-32chars-policy1-32chars
Admin State : Up Oper State : Down
Binding Label : 33 Preference : 254
Binding Label : 33
Last Change : 03/28/2018 23:57:33
Ingress Stats : Disabled
Next-hop Group : 20
Admin State : Up Oper State : Down
Resolution Type : direct
Last Change : 03/28/2018 23:57:32
Primary
Oper State : Down NH Addr : 2.2.2.2
Last Change : 03/28/2018 23:57:32
Backup
Oper State : Down NH Addr : 3.3.3.3
Last Change : 03/28/2018 23:57:32
===============================================================================
forwarding-policy
Syntax
forwarding-policy name egress-stats
Context
[Tree] (clear>router>mpls>forwarding-policies forwarding-policy)
Full Context
clear router mpls forwarding-policies forwarding-policy
Description
This command clears the egress statistics of the specified forwarding policy instance.
Parameters
- name
Specifies the forwarding policy name up to 64 characters.
- egress-stats
Clears the egress statistics of the specified forwarding policy.
Platforms
All
forwarding-policy
Syntax
forwarding-policy plcy egress-stats [interval seconds] [ repeat repeat] [{absolute | rate}]
Context
[Tree] (monitor>router>mpls>forwarding-policies forwarding-policy)
Full Context
monitor router mpls forwarding-policies forwarding-policy
Description
This command clears the egress statistics of the specified forwarding policy instance.
Parameters
- plcy
Specifies the forwarding policy up to 64 characters.
- egress-stats
Monitors the egress statistics of the specified forwarding policy.
- seconds
Configures the interval for each display in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
Displays the absolute statistics of the specified forwarding policy.
- rate
Displays the rate statistics of the specified forwarding policy.
Platforms
All
forwarding-table
forwarding-table
Syntax
forwarding-table [slot-number]
Context
[Tree] (clear>router forwarding-table)
Full Context
clear router forwarding-table
Description
This command clears the route table on the specified IOM with the route table.
If the slot number is not specified, the command forces the route table to be recalculated.
Parameters
- slot-number
Clears the specified IOM slot.
Platforms
All
fp
fp
Syntax
fp
Context
[Tree] (show>card>virtual fp)
Full Context
show card virtual fp
Description
This command displays virtual FP information on the card.
Platforms
VSR
fp
Syntax
fp [slot-number[/fp-number]] [path path-type]
Context
[Tree] (show>mcast-management fp)
Full Context
show mcast-management fp
Description
This command displays multicast path management FP-related information.
Parameters
- slot-number
Displays information for the specified card slot.
- fp-number
Specifies an FP.
- path-type
Specifies the path type.
Platforms
7450 ESS, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-7/12/12e, 7750 SR-s, 7950 XRS, VSR
Output
The following output displays an example of multicast management MDA information.
Sample Output*A:PE# show mcast-management fp 5/1
===============================================================================
Fp 5/1
===============================================================================
S/F Bw-policy Type In-use-Bw Admin
-------------------------------------------------------------------------------
5/1 reduce-paths Primary 3964 Kbps up
reduce-paths Secondary 0 Kbps up
reduce-paths Blackhole 0 Kbps up
-------------------------------------------------------------------------------
*A:PE#
fp
Syntax
fp [fp-number]
Context
[Tree] (tools>dump>resource-usage>card fp)
Full Context
tools dump resource-usage card fp
Description
This command displays resource information for FPs.
Parameters
- fp-number
Specifies an FP.
Platforms
All
Output
The following output displays an example of FP card resource usage information.
Sample Output# tools dump resource-usage card 1 fp 1
===============================================================================
Resource Usage Information for Card Slot #1 FP #1
===============================================================================
Total Allocated Free
-------------------------------------------------------------------------------
...
Dynamic Policer Stats (in use by Egress) - 0
Fast Depth Monitored Queues | 10000 25 9975
Egress User Queues | 253952 6 253946
Egress User Policers | 393215 1 393214
fp-resource-policy
fp-resource-policy
Syntax
fp-resource-policy [fp-resource-policy-name] [ association]
fp-resource-policy [fp-resource-policy-name] [ detail]
Context
[Tree] (show>qos fp-resource-policy)
Full Context
show qos fp-resource-policy
Description
This command displays the FP resource policies configured on the system.
Parameters
- fp-resource-policy-name
Displays the FP resource policy name, up to 32 characters.
- association
Displays the entities associated to the specified FP resource policy.
- detail
Displays detailed FP resource policies information, including FP resource policy associations.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS
Output
The following output is an example of FP resource policy information.
Sample OutputA:PE# show qos fp-resources-policy
===============================================================================
FP Resource Policy Summary
===============================================================================
Policy Name Description
-------------------------------------------------------------------------------
default Default FP resource policy.
fp-res-policy-1
===============================================================================
A:PE#
A:PE# show qos fp-resources-policy fp-res-policy-1 associations
===============================================================================
FP Resource Policy
===============================================================================
Policy Name : fp-res-policy-1
Description : (Not Specified)
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
FP : 1-1
FP : 1-2
FP : 1-3
FP : 1-4
===============================================================================
A:PE#
A:PE# show qos fp-resources-policy fp-res-policy-1 detail
===============================================================================
FP Resource Policy
===============================================================================
Policy Name : fp-res-policy-1
Description : (Not Specified)
-------------------------------------------------------------------------------
Queues
-------------------------------------------------------------------------------
Ingress Percent of Total : 50.00
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
FP : 1-1
FP : 1-2
FP : 1-3
FP : 1-4
===============================================================================
A:PE#
fp-tunnel-table
fp-tunnel-table
Syntax
fp-tunnel-table slot-number [ip-prefix/prefix-length]
fp-tunnel-table slot-number [{ipv4 | ipv6}]
Context
[Tree] (show>router fp-tunnel-table)
Full Context
show router fp-tunnel-table
Description
This command displays the IOM/IMM label, next-hop and outgoing interface information for BGP, LDP and RSVP tunnels used in any of the following applications:
BGP shortcut (config>router>bgp>next-hop-resolution>shortcut-tunnel)
IGP shortcut (config>router>isis[ospf]>igp-shortcut)
IGP prefix resolved to an LDP LSP (config>router>ldp-shortcut)
Static route resolved to a LDP or RSVP LSP
VPRN auto-bind
6PE/6VPE.
Parameters
- slot-number
Displays information for the specified slot.
- ip-prefix[/prefix-length]
Displays routes only matching the specified ip-address and length.
- ipv4
Displays the output to IPv4-based FP tunnel tables.
- ipv6
Displays the output to IPv6-based FP tunnel tables.
Platforms
All
Output
The following output is an example of router FP tunnel information.
Sample Output*A:Dut-B# show router fp-tunnel-table 1 10.20.1.3/32
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.20.1.3/32 LDP -
262137 10.2.1.3 1/1/3:1
10.20.1.3/32 RSVP 1
262133 10.2.1.3 1/1/3:1
10.20.1.3/32 SR-ISIS-0 -
18602 10.2.1.3 1/1/3:1
10.20.1.3/32 SR-OSPF-0 -
19102 10.2.1.3 1/1/3:1
-------------------------------------------------------------------------------
Total Entries : 4
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:Dut-C# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.0.0.1/32 SR-ISIS-0 -
20001 10.3.4.4 2/1/3:1
20001/21005 10.2.3.2(B) 1/1/2
10.20.1.2/32 SR-ISIS-0 -
21002 10.2.3.2 1/1/2
21002/21005 10.3.4.4(B) 2/1/3:1
10.20.1.4/32 SR-ISIS-0 -
21004 10.3.4.4 2/1/3:1
21004/21005 10.2.3.2(B) 1/1/2
10.20.1.5/32 SR-ISIS-0 -
21005 10.2.3.2 1/1/2
21005 10.3.4.4(B) 2/1/3:1
-------------------------------------------------------------------------------
Total Entries : 4
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C#
*A:Dut-C# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.1.3.1/32 SR -
3 10.1.3.1 1/1/1
10.2.3.2/32 SR -
3 10.2.3.2 1/1/2:1
10.3.5.5/32 SR -
3 10.3.5.5 2/1/1
10.2.3.2/32 SR -
3 10.2.3.2 1/1/2:2
10.20.1.1/32 SR-OSPF-0 -
21011 10.1.3.1 1/1/1
22011 10.2.3.2(B) 1/1/2:1
10.20.1.2/32 SR-OSPF-0 -
22022 10.2.3.2 1/1/2:2
24022/25044 10.3.5.5(B) 2/1/1
10.20.1.4/32 SR-OSPF-0 -
25044 10.3.5.5 2/1/1
22044 10.2.3.2 1/1/2:2
10.20.1.5/32 SR-OSPF-0 -
25055 10.3.5.5 2/1/1
24055/22044 10.2.3.2(B) 1/1/2:2
10.20.1.6/32 SR-OSPF-0 -
25066 10.3.5.5 2/1/1
24066/22044 10.2.3.2(B) 1/1/2:2
-------------------------------------------------------------------------------
Total Entries : 9
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C#
*A:Dut-F# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.0.11.1/32 SR-OSPF-0 -
30004 10.0.26.2 1/1/3:1
40004 10.0.36.3(B) 1/1/4:1
10.0.22.2/32 SR-OSPF-0 -
30005 10.0.26.2 1/1/3:1
20005/40004 10.0.36.3(B) 1/1/4:1
10.0.26.2/32 SR -
3 10.0.26.2 1/1/3:1
50011/60001 10.0.56.5(B) 1/1/2:1
10.0.26.2/32 SR -
3 10.0.26.2 1/1/3:1
20005/40004 10.0.36.3(B) 1/1/4:1
10.0.33.3/32 SR-OSPF-0 -
40000 10.0.36.3 1/1/4:1
30998 10.0.26.2(B) 1/1/3:1
10.0.36.3/32 SR -
3 10.0.36.3 1/1/4:1
10.0.44.4/32 SR-OSPF-0 -
30001 10.0.26.2 1/1/3:1
60001 10.0.56.5(B) 1/1/2:1
10.0.55.5/32 SR-OSPF-0 -
60002 10.0.56.5 1/1/2:1
30995 10.0.26.2(B) 1/1/3:1
10.0.56.5/32 SR -
3 10.0.56.5 1/1/2:1
10.20.1.1/32 SR-OSPF-0 -
30010 10.0.26.2 1/1/3:1
40010 10.0.36.3(B) 1/1/4:1
10.20.1.2/32 SR-OSPF-0 -
30011 10.0.26.2 1/1/3:1
50011/60001 10.0.56.5(B) 1/1/2:1
10.20.1.3/32 SR-OSPF-0 -
40006 10.0.36.3 1/1/4:1
20006/30004 10.0.26.2(B) 1/1/3:1
10.20.1.4/32 SR-OSPF-0 -
30007 10.0.26.2 1/1/3:1
60007 10.0.56.5(B) 1/1/2:1
10.20.1.5/32 SR-OSPF-0 -
60008 10.0.56.5 1/1/2:1
50008/30001 10.0.26.2(B) 1/1/3:1
-------------------------------------------------------------------------------
Total Entries : 14
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-F#
*A:Dut-C# show router fp-tunnel-table 1 10.20.1.5/32
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.20.1.5/32 LDP -
262135 10.10.5.5 2/1/1
3 10.20.1.5(B) SR
10.20.1.5/32 SR-ISIS-0 -
474390 10.10.5.5 2/1/1
474390/474389 10.10.12.2(B) lag-1
-------------------------------------------------------------------------------
Total Entries : 2
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C>config>router>ospf3# show router fp-tunnel-table 1 ipv6
===============================================================================
IPv6 Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl
NextHop Intf/Tunnel
-------------------------------------------------------------------------------
3ffe::100:b01/128 SR-OSPF3-0 -
20004
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
30004/70005
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::100:1602/128 SR-OSPF3-0 -
20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
70005
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::100:2c04/128 SR-OSPF3-0 -
20001
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
70001
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::100:3705/128 SR-OSPF3-0 -
70002
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 2/1/2:1
30002/20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"(B) 1/1/1:1
3ffe::100:4206/128 SR-OSPF3-0 -
70003
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 2/1/2:1
30003/20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"(B) 1/1/1:1
3ffe::a14:101/128 SR-OSPF3-0 -
20010
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
30010/70005
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::a14:102/128 SR-OSPF3-0 -
20011
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
70011
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::a14:104/128 SR-OSPF3-0 -
20007
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
70007
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
3ffe::a14:105/128 SR-OSPF3-0 -
70008
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 2/1/2:1
30008/20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"(B) 1/1/1:1
3ffe::a14:106/128 SR-OSPF3-0 -
70009
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 2/1/2:1
30009/20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"(B) 1/1/1:1
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"/128 SR 524325
3
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 1/1/1:1
30004/70005
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"(B) 2/1/2:1
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0"/128 SR 524326
3
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 2/1/2:1
30003/20005
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0"(B) 1/1/1:1
-------------------------------------------------------------------------------
Total Entries : 12
-------------------------------------------------------------------------------
===============================================================================
A:Dut-C# show router fp-tunnel-table 1 ipv6
===============================================================================
IPv6 Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl
NextHop Intf/Tunnel
-------------------------------------------------------------------------------
3ffe::a14:101/128 LDP -
524286
fe80::21-"ip-3FFE::A0A:203" 1/1/1
3ffe::a14:101/128 SR-ISIS-0 -
424488
fe80::21-"ip-3FFE::A0A:203" 1/1/1
3ffe::a14:102/128 LDP -
524286
fe80::122-"ip-3FFE::A0A:C03" lag-1
3ffe::a14:102/128 SR-ISIS-0 -
439489
fe80::122-"ip-3FFE::A0A:C03" lag-1
3ffe::a14:104/128 LDP -
524284
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
3ffe::a14:104/128 SR-ISIS-0 -
469491
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
3ffe::a14:105/128 LDP -
524286
fe80::55-"ip-3FFE::A0A:503" 2/1/1
3ffe::a14:105/128 SR-ISIS-0 -
484492
fe80::55-"ip-3FFE::A0A:503" 2/1/1
3ffe::a14:106/128 LDP -
524269
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
3ffe::a14:106/128 SR-ISIS-0 -
469493
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
3ffe::a14:106/128 SR-TE 655362
424493
3ffe::a14:101 SR
3ffe::a14:106/128 SR-TE 655363
424493
3ffe::a14:101 SR
fe80::21-"ip-3FFE::A0A:203"/128 SR 524289
3
fe80::21-"ip-3FFE::A0A:203" 1/1/1
fe80::21-"ip-3FFE::A0A:203"/128 SR 524290
3
fe80::21-"ip-3FFE::A0A:203" 1/1/1
fe80::32-"ip-3FFE::A0A:303"/128 SR 524293
3
fe80::32-"ip-3FFE::A0A:303" 1/1/2
fe80::32-"ip-3FFE::A0A:303"/128 SR 524294
3
fe80::32-"ip-3FFE::A0A:303" 1/1/2
fe80::55-"ip-3FFE::A0A:503"/128 SR 524300
3
fe80::55-"ip-3FFE::A0A:503" 2/1/1
fe80::55-"ip-3FFE::A0A:503"/128 SR 524301
3
fe80::55-"ip-3FFE::A0A:503" 2/1/1
fe80::114-"ip-3FFE::A0A:B03"/128 SR 524295
3
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
fe80::114-"ip-3FFE::A0A:B03"/128 SR 524296
3
fe80::114-"ip-3FFE::A0A:B03" 2/1/2
fe80::122-"ip-3FFE::A0A:C03"/128 SR 524291
3
fe80::122-"ip-3FFE::A0A:C03" lag-1
fe80::122-"ip-3FFE::A0A:C03"/128 SR 524292
3
fe80::122-"ip-3FFE::A0A:C03" lag-1
-------------------------------------------------------------------------------
Total Entries : 22
-------------------------------------------------------------------------------
===============================================================================
A:Dut-C# show router fp-tunnel-table 3 3ffe::a14:101/128
===============================================================================
IPv6 Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl
NextHop Intf/Tunnel
-------------------------------------------------------------------------------
3ffe::a14:101/128 LDP -
524286
fe80::21-"ip-3FFE::A0A:203" 1/1/1
3ffe::a14:101/128 SR-ISIS-0 -
424488
fe80::21-"ip-3FFE::A0A:203" 1/1/1
-------------------------------------------------------------------------------
Total Entries : 2
-------------------------------------------------------------------------------
===============================================================================
frag-stats
frag-stats
Syntax
frag-stats
Context
[Tree] (show>service>nat>map frag-stats)
Full Context
show service nat map frag-stats
Description
This command displays NAT MAP fragmentation information.
Platforms
VSR
Output
The following is sample output for this command, and Map Frag-Stats Output Fields describes the fields.
Sample Output*A:Dut-D>show>service>nat>map# show service nat map frag-stats
===============================================================================
NAT MAP fragmentation statistics
===============================================================================
Rx Resolved Packets : 0
Rx Unresolved Packets : 0
Tx Frags : 0
Dropped Frags : 0
Created Flows : 0
Flow Collisions : 0
Exceeded Max Flows : 0
Exceeded Max Timeouts : 0
Exceeded Max Buffers : 0
Exceeded Max Buffers Per Flow : 0
In-Use Flows % : 0
Max Flows % : 0
In-Use Buffers % : 0
Max Buffers % : 0
===============================================================================
Label |
Description |
|---|---|
Rx Resolved Packets |
Specifies fragments that were resolved and never buffered. This includes:
|
Rx Unresolved Packets |
Specifies the number of packets that were queued in the system since the last clear command was invoked. For example, out-of-order fragments without a matching flow record (missing the first fragment). These packets can be eventually resolved and forwarded, or discarded (for example, as a result of timeout). |
Tx Frags |
Specifies the fragments that were transmitted (Rx Resolved and Rx Unresolved that were eventually resolved) out of the fragmentation logic within the VSR. There is no guarantee that these fragments will be transmitted out of the system as they may be dropped on egress due to congestion or restrictions imposed by the configured filter. |
Dropped Frags |
Specifies the dropped fragments due to some fragmentation issue (timeout, buffer full). |
Created Flows |
A cumulative counter that represents the total number of flow records since the last clear command was invoked. It only counts the first fragment and roughly represents the amount of fragmented packets that were processed by the system since the last clear command. The counter does not provide any indication about the number of flows (packets whose fragments were transmitted fully) that were actually transmitted. |
Flow Collisions |
Represents the number of overlapping first fragments. For example, when a flow record already exists and another first fragment for this flow is received. |
Exceeded Max Flows |
Specifies the number of occurrences when the number of flows in the system exceeded its maximum supported value. |
Exceeded Max Timeouts |
Specifies the number of fragments that have timed out (since the last clear command):
|
Exceeded Max Buffers |
Specifies the number of occurrences when the number of buffers in the system exceeded its maximum supported value. |
Exceeded Max Timeouts |
Specifies the number of fragments that have timed out (since the last clear command):
|
Exceeded Max Buffers |
Specifies the number of occurrences when the number of buffers in the system exceeded its maximum supported value. |
Exceeded Max Buffers Per Flow |
Specifies the number of occurrences when a fragment count per flow has exceeded its limit. |
In-Use Flows |
An approximation of the number of flow records that are currently in use. The counter provides an estimate, expressed in percent, of the number of fragmented packets that were being processed at the time the counter was invoked. |
Max Flows |
Specifies the amount of time in seconds that the system will remain in a hold down state before being used again. |
In-Use Buffers |
Represents the amount of buffered fragments, expressed in percent of the maximum buffer space, that can be used for fragmentation. |
Max Buffers |
A non-cumulative counter that represents the maximum number of buffers allocated since the last clear command. The counter captures the highest value of the buffers-in-use counter since the last clear command. The counter shows the percentage of the total buffer space that can be used by fragmentation. |
frame-relay
frame-relay
Syntax
frame-relay port-id
Context
[Tree] (tools>dump frame-relay)
Full Context
tools dump frame-relay
Description
This command displays frame-relay information.
Parameters
- port-id
Specifies the physical port ID.
port-id
slot/mda/port [.channel]
bundle-id
bundle-type-slot/mda.bundle-num
bundle
keyword
type
fr
bundle-num
1 to 336
eth-sat-id
esat-id/slot/port
esat
keyword
id
1 to 20
pxc-id
pxc-id.sub-port
pxc
keyword
id
1 to 64
sub-port
a, b
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of frame relay information.
Sample Outputtools dump frame-relay bundle-fr-1/1.1
MLFR info for bundle-fr-1/1.1:
expectedBundleIdStr : "7750-bundle-fr-1/1.1"
bundleId : 1
active/configured : 4/4
adminEnabled : 1
ddDebDownCnt : 10
ddMaxForBundle : 0
fwdId : 0
linkDebugMask : 0
-------- Member Information ---------
1/1/1.1.1.1 PortId = 0x22208056
Internal ID : bundle 1, link 1
Link protocol state : Up
Diff delay state : Yellow
ddRedCnt : 0
ddYellowCnt : 11
Smoothed diff delay : 20 ms.
Historical RTT : 22788, 22756, 22752 us.
Rx LinkId : "1/1/1.1.1.1"
WARNING : dbgDelay=20 ms
LIP CTL Messages : Tx: 136 Rx: 135
Hello Messages : Tx: 121 Rx: 12
Hello Ack Messages : Tx: 12 Rx: 121
AddLink Messages : Tx: 2 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 1
AddLinkRej Messages : Tx: 0 Rx: 0
1/1/1.1.2.1 PortId = 0x22208077
Internal ID : bundle 1, link 2
Link protocol state : Up
Diff delay state : OK
Smoothed diff delay : 0 ms.
Historical RTT : 2271, 2304, 2309 us.
Rx LinkId : "1/1/1.1.2.1"
LIP CTL Messages : Tx: 136 Rx: 135
Hello Messages : Tx: 121 Rx: 12
Hello Ack Messages : Tx: 12 Rx: 121
AddLink Messages : Tx: 2 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 1
AddLinkRej Messages : Tx: 0 Rx: 0
1/1/1.1.3.1 PortId = 0x22208098
Internal ID : bundle 1, link 4
Link protocol state : Up
Diff delay state : OK
Smoothed diff delay : 0 ms.
Historical RTT : 2218, 2223, 2359 us.
Rx LinkId : "1/1/1.1.3.1"
LIP CTL Messages : Tx: 14 Rx: 13
Hello Messages : Tx: 8 Rx: 1
Hello Ack Messages : Tx: 1 Rx: 8
AddLink Messages : Tx: 3 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 2
AddLinkRej Messages : Tx: 0 Rx: 0
1/1/1.1.4.1 PortId = 0x222080b9
Internal ID : bundle 1, link 3
Link protocol state : Up
Diff delay state : OK
Smoothed diff delay : 0 ms.
Historical RTT : 2248, 2242, 2309 us.
Rx LinkId : "1/1/1.1.4.1"
LIP CTL Messages : Tx: 14 Rx: 13
Hello Messages : Tx: 8 Rx: 1
Hello Ack Messages : Tx: 1 Rx: 8
AddLink Messages : Tx: 3 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 2
AddLinkRej Messages : Tx: 0 Rx: 0
frame-relay
Syntax
frame-relay [detail]
Context
[Tree] (show>multilink-bundle>mlfr frame-relay)
Full Context
show multilink-bundle mlfr frame-relay
Description
This command displays frame-relay group data.
Parameters
- detail
Displays detailed information.
Platforms
7450 ESS, 7750 SR-7/12/12e
frame-relay
Syntax
frame-relay [detail]
Context
[Tree] (show>port frame-relay)
Full Context
show port frame-relay
Description
This command displays frame-relay port information.
Parameters
- detail
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
free-addresses
free-addresses
Syntax
free-addresses ip-address[/mask]
free-addresses summary [subnet ip-address[/ mask]
free-addresses pool pool-name
Context
[Tree] (show>router>dhcp>local-dhcp-server free-addresses)
Full Context
show router dhcp local-dhcp-server free-addresses
Description
This command displays the free addresses in a subnet.
Parameters
- pool-name
Specifies a DHCP pool name on the router.
- subnet
Specifies a subnet of IP addresses that are served from the pool.
- summary
Displays summary output of the free addresses.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of free address information
Sample Output*A:ALA-48>show>router>dhcp>local-dhcp-server# free addresses pool test subnet 10.0.0.0/24
===============================================================================
Free addresses in subnet 10.0.0.0/24
===============================================================================
IP Address
-------------------------------------------------------------------------------
No. of free addresses: 0
===============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server#
Free Addresses Field Descriptions describes free addresses pool command output fields.
Field |
Description |
|---|---|
IP Address |
The free IP addresses in the subnet |
No of free addresses |
The total number of free addresses in the subnet |
ftn
ftn
Syntax
ftn [endpoint endpoint | sender sender | nexthop nexthop | lsp-id lsp-id | tunnel-id tunnel-id | label start-label end-label]
Context
[Tree] (tools>dump>router>mpls ftn)
Full Context
tools dump router mpls ftn
Description
This command dumps FEC-to-NHLFE (FTN) information for MPLS.
Parameters
- endpoint
Specifies the endpoint or destination IP address.
- sender
Specifies the sender IP address.
- lsp-id
Specifies the LSP ID.
- tunnel-id
Specifies the tunnel ID.
- nexthop
Specifies the next hop IP address.
- start-label
Specifies the start label value for the label range of the display.
- end-label
Specifies the end label value for the label range of the display.
Platforms
All
fwd-path-ext
fwd-path-ext
Syntax
fwd-path-ext [fpe fpe-id]
fwd-path-ext fpe fpe-id associations
Context
[Tree] (show fwd-path-ext)
Full Context
show fwd-path-ext
Description
This command displays FPE information.
Parameters
- fpe-id
Specifies the FPE ID.
- associations
Displays a list of current fwd path extensions to which the FPE is associated.
Platforms
All
Output
The following output is an example of show fwd-path-ext command information, and Output Fields: show fwd-path-ext describes the output fields.
Sample OutputA:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe
===============================================================================
FPE Info
===============================================================================
FPE Id Path Application Description
pxc/xc-a, xc-b
-------------------------------------------------------------------------------
1 pxc 1 pw-port xyz
2 lag 1, lag 2 vxlan-term abc
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
SDP-Id Range: 1-100
===============================================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 1
============================================================
FPE Id: 2
============================================================
Description : xyz
Path : pxc 1
Pw Port : Enabled Oper: up
Vxlan Termination : Disabled
============================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 2
============================================================
FPE Id: 2
============================================================
Description : abc
Path : lag 1, lag 2
Pw Port : Disabled
Vxlan Termination : Disabled Oper: down ß Can be down due to lag 1/2 being down, PXCs within the lags being down
============================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 1 associations
============================================================
pw-port associations
============================================================
Epipe Svc Id PW-Port-Id
============================================================
110
220
330
============================================================
Vxlan-termination associations
============================================================
None
============================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 2 associations
============================================================
pw-port associations
============================================================
None
============================================================
Vxlan-termination associations
============================================================
tunnel-termination
============================================================
10.1.1.1
10.2.1.1
2001:db8::10
2001:db8::20
============================================================
Field |
Description |
|---|---|
FPE Id |
Displays the configured ID of the FPE. |
Path pxc/ xc-a, xc-b |
Displays the path associated with this FPE. This can be a single PXC (pair of PXC sub-ports .a and .b), or it can be a LAG with PXC sub-ports as member ports. PXC based LAG is used for redundancy and increased throughput of the FPE. In case of a PXC based LAG, the path is referred to as xc-a and xc-b. |
Application |
Displays the application associated with this FPE. Based on the application type, the system will internally configure logic on underlying PXC (or PXC based LAG) necessary to accommodate the application. |
Description |
Displays the user-configurable string used to describe the use of the FPE. |
SDP-id Range |
Displays the configurable SDP-id range used for internal SDPs that are utilized by FPEs. |
Path |
Path associated with this FPE. This can be a single PXC (pair of PXC sub-ports .a and .b), or it can be a LAG with PXC sub-ports as member ports. PXC based LAG is used for redundancy and increased throughput of the FPE. |
PW-Port |
Displays the FPE that is used by PW-port application. |
VXLAN-Termination |
Displays the FPE that is used by Vxlan-Termination application. |
Oper |
Displays the status of the application. |
EPIPE svc Id |
Displays the Epipe service ID with which the PW-port is associated. |
PW-Port Id |
Displays the PW-port ID that is associated with the EPIPE. |
Tunnel termination |
Displays the IP addresses on which the VXLAN tunnel is terminated. |