l Commands

l2-aware

Syntax

l2-aware create subscriber sub-ident-string ip ip-address protocol {tcp | udp} [port port] lifetime lifetime [outside-ip ip-address] [outside-port port] [nat-policypolicy-name]

l2-aware delete subscriber sub-ident-string ip ip-address protocol {tcp | udp} port port [nat-policy policy-name]

l2-aware modify subscriber sub-ident-string ip ip-address protocol {tcp | udp} port port lifetime lifetime [nat-policypolicy-name]

Context

[Tree] (tools>perform>nat>port-forwarding-action l2-aware)

Full Context

tools perform nat port-forwarding-action l2-aware

Description

This command enables Layer-2-Aware NAT port forwarding action.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

l2-aware-blocks

Syntax

l2-aware-blocks [outside-ip-prefix ip-prefix/length] [outside-port [1..65535]] [pool pool-name]

Context

[Tree] (show>router>nat l2-aware-blocks)

Full Context

show router nat l2-aware-blocks

Description

This command displays Layer 2 aware NAT blocks.

Parameters

ip-prefix

Specifies the IP prefix.

Values: a.b.c.d (host bits must be 0)

length

Specifies the IP prefix length.

Values: 1 to 32

pool-name: Specifies the pool name up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is sample output for this command.

Sample Output

show router nat l2-aware-blocks
===============================================================================
Layer-2-Aware NAT blocks for Base
===============================================================================
10.81.0.0 [32..33]
Pool : MyPool
Policy : outPolicy
Started : 2010/02/04 16:24:55
Subscriber ID : Sub001
10.81.0.0 [34..35]
Pool : MyPool
Policy : outPolicy
Started : 2010/02/04 16:25:24
Subscriber ID : Sub003
10.81.0.203 [32..41]
Pool : MyPool2
Policy : outPolicy2
Started: 2010/02/04 16:25:21
Subscriber ID : Sub002
-------------------------------------------------------------------------------
Number of blocks: 3
===============================================================================

l2-aware-hosts

Syntax

l2-aware-hosts [outside-router router-instance] [outside-ip outside-ip-address] [inside-ip-prefix ip-prefix/mask] [vas-filter vas-filter-name]

Context

[Tree] (show>service>nat l2-aware-hosts)

Full Context

show service nat l2-aware-hosts

Description

This command displays layer-2 aware NAT hosts.

Parameters

nat-policy-name: Specifies the NAT policy name, up to 32 characters.

nat-group-id

Specifies the NAT group ID.

Values: 1 to 4

router-instance

Specifies the router instance.

Values


router-name:	Base , management
service-id:	1 to 2147483647
svc-name:	A string up to 64 characters in length.

outside-ip-address

Specifies the outside IP address.

Values: a.b.c.d

sub-ident: Specifies the identifier, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is sample output for this command.

Sample Output

show service nat l2-aware-hosts
===============================================================================
Layer-2-Aware NAT hosts
===============================================================================
Inside IP Out-Router Outside IP Subscriber
-------------------------------------------------------------------------------
10.0.0.100 Base 10.81.0.0 Sub001
10.0.0.102 Base 10.81.0.0 Sub001
10.0.0.101 Base 10.81.0.203 Sub002
10.0.0.103 Base 10.81.0.0 Sub003
-------------------------------------------------------------------------------
No. of hosts: 4
===============================================================================

l2-aware-sub

Syntax

l2-aware-sub sub-ident-string

l2-aware-sub sub-ident-string firewall-statistics

Context

[Tree] (clear>nat l2-aware-sub)

Full Context

clear nat l2-aware-sub

Description

This command clears NAT mappings for L2-Aware subscribers.

Parameters

sub-ident-string: Specifies the subscriber identification string, up to 64 characters.

firewall-statistics: Clears only the firewall counters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

l2-aware-subscribers

Syntax

l2-aware-subscribers subscribersub-ident

l2-aware-subscribers [nat-policy nat-policy-name] [nat-group nat-group-id] [member [1..255]] [outside-router router-instance] [outside-ip outside-ip-address] [firewall-policy policy-name]

Context

[Tree] (show>service>nat l2-aware-subscribers)

Full Context

show service nat l2-aware-subscribers

Description

This command displays layer-2 aware NAT subscribers.

Parameters

nat-policy-name: Specifies the NAT policy name, up to 32 characters.

nat-group-id

Specifies the NAT group ID.

Values: 1 to 4

router-instance

Specifies the router instance.

Values


router-name:	Base, management
service-id:	1 to 2147483647
svc-name:	A string up to 64 characters.

outside-ip-address

Specifies the outside IP address.

Values: a.b.c.d

sub-ident: Specifies the identifier, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is sample output for this command.

Sample Output

show service nat l2-aware-subscribers
===============================================================================
Layer-2-Aware NAT subscribers
===============================================================================
Subscriber Policy Group/Member
Outside IP Router Ports
-------------------------------------------------------------------------------
Sub001 outPolicy 1/1
10.81.0.0 Base 32-33
Sub002 outPolicy2 1/1
10.81.0.203 Base 32-41
Sub003 outPolicy 1/1
10.81.0.0 Base 34-35
-------------------------------------------------------------------------------
No. of subscribers: 3
===============================================================================


show service nat l2-aware-subscribers subscriber "Sub881”
===============================================================================
Layer-2-Aware NAT subscriber Sub001
===============================================================================
Policy : outPolicy
ISA NAT group : 1
ISA NAT group member : 1
Outside router : Base
Outside IP : 10.81.0.0
ICMP Port usage (%) : < 1
ICMP Port usage high : false
UDP Port usage (%) : < 1
UDP Port usage high : false
TCP Port usage (%) : < 1
TCP Port usage high : false
Session usage (%) : < 1
Session usage high : false
Number of sessions : 0
Number of reserved sessions : 0
Ports : 32-33
===============================================================================

l2-route-table

Syntax

l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]

Context

[Tree] (show>service l2-route-table)

Full Context

show service l2-route-table

Description

This command displays Layer 2 route table information.

Parameters

detail: Displays detailed information.

bgp-ad: Displays BGP AD related information.

multi-homing: Displays multihoming related information.

bgp-vpls: Displays BGP VPLS related information.

bgp-vpws: Displays BGP VPWS related information.

all-routes: Displays active or inactive routes.

Platforms

All

Output

Use the following command to display Layer 2 route table information.

Sample Output

show service l2-route-table


========================================================================
Services: L2 Route Information - Summary
========================================================================
Svc Id L2-Routes (RD-Prefix) Next Hop Origin
Sdp Bind Id PW Temp Id 
------------------------------------------------------------------------
1000 *192.0.2.3:60002-192.0.2.3 192.0.2.3 BGP-L2
32766:4294967293 1 
------------------------------------------------------------------------
No. of L2 Route Entries: 1
========================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
Svc Id L2-Routes (RD-Prefix) Next Hop SiteId State DF
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of L2 Multi-Homing Route Entries: 0
===============================================================================
========================================================
Services: L2 Bgp-Vpls Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id 
--------------------------------------------------------
1001 *192.0.2.3:60003 192.0.2.3 3
32765:4294967292 1 
--------------------------------------------------------
No. of L2 Bgp-Vpls Route Entries: 1
========================================================
========================================================
Services: L2 Bgp-Vpws Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id 
--------------------------------------------------------
1002 *192.0.2.3:60004 192.0.2.3 3
32764:4294967291 1 
--------------------------------------------------------
No. of L2 Bgp-Vpws Route Entries: 1 
========================================================

show service l2-route-table bgp-vpls


========================================================
Services: L2 Bgp-Vpls Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id 
--------------------------------------------------------
1001 *192.0.2.3:60003 192.0.2.3 3
32765:4294967292 1 
--------------------------------------------------------
No. of L2 Bgp-Vpls Route Entries: 1
========================================================

show service l2-route-table detail


===============================================================================
Services: L2 Route Information - Summary
===============================================================================
Svc Id      : 1000
Origin      : BGP-L2
PW Temp Id  : 1
RD-Prefix   : *192.0.2.3:60002-192.0.2.3
Next Hop    : 192.0.2.3
Status      : active
Sdp Bind Id : 32766:4294967293
===============================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
===============================================================================
===============================================================================
Services: L2 Bgp-Vpls Route Information - Summary
===============================================================================
Svc Id          : 1001
VeId            : 3
PW Temp Id      : 1
RD              : *192.0.2.3 : 60003
Next Hop        : 192.0.2.3
State (D-Bit)   : up(0)
Path MTU        : 1514
Hash Label Tx   : 1
Hash Label Rx   : 1
Control Word    : 0
Seq Delivery    : 0
DF Bit          : clear
Status          : active
Sdp Bind Id     : 32765:4294967292
===============================================================================
===============================================================================
Services: L2 Bgp-Vpws Route Information - Summary
===============================================================================
Svc Id          : 1002
VeId            : 3
PW Temp Id      : 1 
RD              : *192.0.2.3:60004
Next Hop        : 192.0.2.3
State (D-Bit)   : up(0)
Path MTU        : 1514
Hash Label Tx   : 1
Hash Label Rx   : 1
Control Word    : 0
Seq Delivery    : 0
Status          : active
Tx Status       : active
CSV             : 0
Preference      : 0
Sdp Bind Id     : 32764:4294967291
===============================================================================

l2-route-table

Syntax

l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]

Context

[Tree] (show>service>id l2-route-table)

Full Context

show service id l2-route-table

Description

This command displays Layer 2 route table information.

Parameters

detail: Displays detailed information.

bgp-ad: Displays BGP-AD information.

multi-homing: Displays multi-homing information.

bgp-vpls: Displays BGP VPLS information.

bgp-vpws: Displays BGP VPWS information.

all-routes: Displays active or inactive routes.

Platforms

All

Output

Use the following command to display Layer 2 route table information.

Sample Output

show service id 1 l2-route-table detail

 
===============================================================================
Services L2 Route Information Detail - Service 1
===============================================================================
 
-------------------------------------------------------------------------------
BGP Auto-discovery Information
-------------------------------------------------------------------------------
Admin State       : Down                
Vpls Id           : 100.1.200.1:65535
Prefix            : 10.20.1.3           
-------------------------------------------------------------------------------
===============================================================================
Services: L2 Route Information - Service 1
===============================================================================
===============================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
===============================================================================
===============================================================================
Services: L2 Bgp-Vpls Route Information - Service 1
===============================================================================
 
VeId           : 1
PW Temp Id     : 20
RD             : *10.20.1.1:1
Next Hop       : 10.20.1.1
State (D-Bit)  : up(0)
Path MTU       : 0
Hash Label Tx  : 1
Hash Label Rx  : 1
Control Word   : 0
Seq Delivery   : 0
DF Bit         : clear
Status         : active
Sdp Bind Id    : 32767:4294967295
 
VeId  : 4
PW Temp Id     : 20
RD             : *10.20.1.6:1
Next Hop       : 10.20.1.6
State (D-Bit)  : up(0)
Path MTU       : 0
Hash Label Tx  : 1
Hash Label Rx  : 1
Control Word   : 0
Seq Delivery   : 0
DF Bit         : clear
Status         : active
Sdp Bind Id    : 32766:4294967292
===============================================================================
===============================================================================
Services: L2 Bgp-Vpws Route Information - Service 1
===============================================================================
===============================================================================

Table 1. Output Fields: show service id l2-route-table
Label	Description
Admin State	Displays the administrative state of the service Up — Indicates the service is administratively enabled Down — Indicates the service is administratively disabled
Vpls Id	Displays the Virtual Private LAN Service (VPLS) ID
Prefix	Displays information for the specified IP prefix and mask length
VeId	Displays the VEID for BGP-VPLS routes
PW Temp Id	Displays the Pseudowire (PW) temporary ID
RD	Displays information for the route distinguisher
Next Hop	Displays the next hop for the route
State (D-Bit)	Displays the state of the Disable-bit (D-bit).The D-bit ensures packet integrity between the terminal and host packet assembler/disassemblers
Path MTU	Displays the maximum transmission unit (MTU) of the path
Hash Label Tx	Displays the transmit hash label value
Hash Label Rx	Displays the receive hash label value
Control Word	Displays information about the control word. The control word is an optional 4-byte field used in the pseudowire packet
Seq Delivery	Displays information about sequence delivery
DF Bit	Displays information about the DF bit
Status	Displays the status of the service
Sdp Bind Id	Displays information about the SDP binding ID

l2-services

Syntax

l2-services [service service-id]

Context

[Tree] (show>cflowd l2-services)

Full Context

show cflowd l2-services

Description

This command displays Layer 2 and SAP/SDP services on which Layer 2 sampling is enabled.

Parameters

service-id

Specifies the service ID.

Values: 1 to 2148278386, svc-name: up to 64 characters

Platforms

All

Output

The following output is an example of cflowd Layer 2 services information.

Sample Output

*A:Dut-B>config>cflowd# show cflowd l2-services
 
===============================================================================
Cflowd L2-Services
===============================================================================
ServiceId      Type        SAP                                      Admin  Oper
-------------------------------------------------------------------------------
1              Epipe       1/1/8:1                                  Up     Up
-------------------------------------------------------------------------------
No. of SAPs: 1
===============================================================================

l2-vpn

Syntax

l2-vpn [aspath-regex reg-exp] [community comm-id] [rd rd] [brief] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]

l2-vpn [aspath-regex reg-exp] hunt [community comm-id] [rd rd] [brief] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]

l2-vpn [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]

Context

[Tree] (show>router>bgp>routes l2-vpn)

Full Context

show router bgp routes l2-vpn

Description

This command displays BGP flow L2-VPN routes.

Parameters

reg-exp: Displays routes matching the specified regular expression, up to 80 characters.

hunt: Displays entries for the specified route.

comm-id

Specifies the community ID, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm | large-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
- {target | origin}:ip-address:comm-val
- {target | origin}:asnum:ext-comm-val
- {target | origin}:ext-asnum:comm-val
- bandwidth:asnum:val-in-mbps
- ext:4300:ovstate
- ext:value1:value2
- flowspec-set:ext-asnum:group-id
where:
- target — route target
- origin — route origin
- ip-address — a.b.c.d
- ext-comm-val — 0 to 4294967295
- ext-asnum — 0 to 4294967295
- bandwidth — bandwidth
- val-in-mbps — 0 to 16777215
- ext — extended
- ext:4300 — origin verification
- ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
- value1 — 0000 to FFFF
- value2 — 0 to FFFFFFFFFFFF
- flowspec-set — flow-spec set
- group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole
large-comm — asn-or-ex:val-or-ex:val-or-ex

rd

Displays information for the route distinguisher.

Values: ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val

brief: Displays the BGP flow L2-VPN route information in a brief format.

l2vpn-type

Specifies a 12-byte Virtual Switch Instance identifier (VSI-ID) type.

Values: bgp-ad, bgp-vpls, bgp-vpws, and multi-homing

veid

Specifies a two byte identifier that represents the local bridging instance in a VPLS and is advertised through the BGP NLRI. This value must be lower than or equal to the max-ve-id.

Values: 0 to 4294967295

vpls-base-offset

Specifies a two byte identifier advertised through the NLRI that is used to indicate which VE-ID should use the advertised NLRI at the receiving PE according to the following rule: if the offset <= local VE-ID <= offset+VBS-1 (VBS = virtual block size = 8 in our implementation) then the NLRI is processed. Otherwise it is ignored. The NLRI with this offset is generated as soon as the first VE-ID value between (offset, offset + VBS-1) is advertised in the network.

Values: 0 to 4294967295

site-id

Specifies a two byte identifier usually employed for the BGP multi-homing solution. This value identifies the BGP multi-homing site associated with one or a set of objects (SAPs, pseudowires, or a combination). The site-id must be identical between the two PEs carrying the connection to the access device multi-homed to the PEs.

Values: 0 to 4294967295

Platforms

All

l2pt

Syntax

l2pt disabled

l2pt [detail]

Context

[Tree] (show>service>id l2pt)

Full Context

show service id l2pt

Description

This command displays Layer 2 Protocol Tunnel (L2-PT) route information associated with this service.

Parameters

disabled: Displays only entries with termination disabled. This helps identify configuration errors.

detail: Displays detailed information.

Platforms

All

Output

The following is an example of service L2PT information.

Sample Output

A:ALA-48>show>service>id# l2pt
==============================================================================
L2pt summary, Service id 700
==============================================================================
       L2pt-term   L2pt-term   Bpdu-trans  Bpdu-trans  Bpdu-trans  Bpdu-trans
       enabled     disabled    auto        disabled    pvst        stp
------------------------------------------------------------------------------
SAP's  0           1           0           1           0           0
SDP's  0           1           0           1           0           0
------------------------------------------------------------------------------
Total  0           2           0           2           0           0
==============================================================================
A:ALA-48>show>service>id#


A:ALA-48>show>service>id# l2pt disabled
==============================================================================
L2pt details, Service id 700
==============================================================================
Service Access Points
------------------------------------------------------------------------------
SapId          L2pt-                         Admin Bpdu-    Oper Bpdu-
               termination                   translation    translation
------------------------------------------------------------------------------
1/1/9:0        disabled                      disabled       disabled
------------------------------------------------------------------------------
Number of SAPs : 1

Service Destination Points
------------------------------------------------------------------------------
SdpId          L2pt-                         Admin Bpdu-    Oper Bpdu-
               termination                   translation    translation
------------------------------------------------------------------------------
2:222          disabled                      disabled       disabled
------------------------------------------------------------------------------
Number of SDPs : 1
==============================================================================
L2pt summary, Service id 700
==============================================================================
       L2pt-term   L2pt-term   Bpdu-trans  Bpdu-trans  Bpdu-trans  Bpdu-trans
       enabled     disabled    auto        disabled    pvst        stp
------------------------------------------------------------------------------
SAP's  0           1           0           1           0           0
SDP's  0           1           0           1           0           0
------------------------------------------------------------------------------
Total  0           2           0           2           0           0
==============================================================================
A:ALA-48>show>service>id#


A:ALA-48>show>service>id# l2pt detail
==============================================================================
L2pt details, Service id 700
==============================================================================
Service Access Points
------------------------------------------------------------------------------
SapId          L2pt-                         Admin Bpdu-    Oper Bpdu-
               termination                   translation    translation
------------------------------------------------------------------------------
1/1/9:0        disabled                      disabled       disabled
------------------------------------------------------------------------------
Number of SAPs : 1

Service Destination Points
------------------------------------------------------------------------------
SdpId          L2pt-                         Admin Bpdu-    Oper Bpdu-
               termination                   translation    translation
------------------------------------------------------------------------------
2:222          disabled                      disabled       disabled
------------------------------------------------------------------------------
Number of SDPs : 1
==============================================================================
L2pt summary, Service id 700
==============================================================================
       L2pt-term   L2pt-term   Bpdu-trans  Bpdu-trans  Bpdu-trans  Bpdu-trans
       enabled     disabled    auto        disabled    pvst        stp
------------------------------------------------------------------------------
SAP's  0           1           0           1           0           0
SDP's  0           1           0           1           0           0
------------------------------------------------------------------------------
Total  0           2           0           2           0           0
==============================================================================
A:ALA-48>show>service>id#

Show L2PT Fields describes show L2PT output fields.

Table 2. Show L2PT Fields
Label	Description
Service id	Displays the 24 bit (0 to 16777215) service instance identifier for the service.
L2pt-term enabled	Indicates if L2-PT-termination and/or Bpdu-translation is in use in this service by at least one SAP or spoke-SDP binding. If in use, at least one of L2PT-termination or Bpdu-translation is enabled. When enabled it is not possible to enable STP on this service.
L2pt-term disabled	Indicates that L2-PT-termination is disabled.
Bpdu-trans auto	Specifies the number of L2-PT PDUs are translated before being sent out on a port or sap.
Bpdu-trans disabled	Indicates that Bpdu-translation is disabled.
SAPs	Displays the number of SAPs with L2PT or BPDU translation enabled or disabled.
SDPs	Displays the number of SDPs with L2PT or BPDU translation enabled or disabled.
Total	Displays the column totals of L2PT entities.
SapId	The ID of the access point where this SAP is defined.
L2pt-termination	Indicates whether L2pt termination is enabled or disabled.
Admin Bpdu-translation	Specifies whether Bpdu translation is administratively enabled or disabled.
Oper Bpdu- translation	Specifies whether Bpdu translation is operationally enabled or disabled.
SdpId	Specifies the SAP ID.

l2pt

Syntax

l2pt

Context

[Tree] (clear>service>statistics>id l2pt)

Full Context

clear service statistics id l2pt

Description

This command clears the l2pt statistics for this service.

Platforms

All

l2tp

Syntax

l2tp

Context

[Tree] (show>router l2tp)

Full Context

show router l2tp

Description

Commands in this context display L2TP related information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

l2tp

Syntax

l2tp

Context

[Tree] (show>system l2tp)

Full Context

show system l2tp

Description

This command displays L2TP system information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of L2TP system information.

Sample Output

*A:Dut-C# show system l2tp
===============================================================================
L2TP system
===============================================================================
Non MC tunnel ID range                                  : 8193-16383
Max number of tunnels                                   : 16383
Max number of sessions                                  : 131071
Max number of sessions per tunnel                       : 32767
===============================================================================

l2tp

Syntax

l2tp

Context

[Tree] (clear>router l2tp)

Full Context

clear router l2tp

Description

Commands in this context clear L2TP data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

l2tp

Syntax

l2tp

Context

[Tree] (tools>perform>router l2tp)

Full Context

tools perform router l2tp

Description

Commands in this context configure performance tools for L2TP.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

l2tp-accounting-policy

Syntax

l2tp-accounting-policy name statistics

Context

[Tree] (clear>aaa l2tp-accounting-policy)

Full Context

clear aaa l2tp-accounting-policy

Description

This command clears L2TP accounting policy data.

Parameters

name: Specifies the L2TP accounting policy name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

l2tp-accounting-policy

Syntax

l2tp-accounting-policy policy-name

l2tp-accounting-policy policy-nameassociations

l2tp-accounting-policy policy-name statistics

l2tp-accounting-policy

Context

[Tree] (show>aaa l2tp-accounting-policy)

Full Context

show aaa l2tp-accounting-policy

Description

This command displays L2TP accounting policy information.

Parameters

policy-name: Specifies the L2TP accounting policy name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

label

Syntax

label start-label [end-label | in-use | owner]

Context

[Tree] (show>router>mpls-labels label)

Full Context

show router mpls-labels label

Description

This command displays MPLS labels exchanged.

Parameters

start-label: Specifies the label value assigned at the ingress router.

end-label: Specifies the label value assigned for the egress router.

in-use: Specifies the number of in-use labels displayed.

Platforms

All

Output

The following output is an example of MPLS label information.

MPLS Label Output Fields describes MPLS label output fields.

Table 3. MPLS Label Output Fields
Label	Description
Label	Displays the value of the label being displayed.
Label Type	Specifies whether the label value is statically or dynamically assigned.
Label Owner	The label owner.
In-use labels in entire range	The total number of labels being used by RSVP.

Sample Output

*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type      Start Label End Label   Aging       Available   Total
----------------------------------------------------------------------------
Static          32          18431       -           18400       18400
Dynamic         18432       524287      0           505443      505856
    Seg-Route   200501      200900      -           0           400
============================================================================


*A:SRU4>config>router>mpls#    show router mpls label 202
=================================================================
MPLS Label 202
=================================================================
Label               Label Type          Label Owner
-----------------------------------------------------------------
202                 static-lsp          STATIC
-----------------------------------------------------------------
In-use labels in entire range                   : 5057
=================================================================
*A:SRU4>config>router>mpls#

label

Syntax

label summary

label [start start-label] [end end-label] [in-use] [owner {static | pce | sr-pol}]

Context

[Tree] (show>router>p2mp-sr-tree label)

Full Context

show router p2mp-sr-tree label

Description

This command displays P2MP SR label information.

Parameters

start-label

specifies the starting label value from which to display the P2MP SR label information. If only start-label is specified, only labels using start-label are displayed.

Values: 32 to 524287

end-label

Specifies the ending label value for which to display P2MP SR label information.

Values: 32 to 524287

in-use: Displays labels that are in use.

owner: Displays labels owned by the specified owner.

static: Displays labels owned by the static owner.

pce: Displays labels owned by the PCE.

sr-pol: Displays labels owned by the SR policy.

Platforms

All

Output

The following output is an example of P2MP SR label information.

Sample Output

A:swsim103>show>router>p2mp-sr-tree# label 
============================================================
P2MP-SR Label Information
============================================================
Label               Owner               InUse
------------------------------------------------------------
30000               static              Yes
30001               static              Yes

label

Syntax

label [label] [detail]

label [label] egress-stats

label [label] ingress-stats

Context

[Tree] (show>router>rib-api label)

Full Context

show router rib-api label

Description

This command displays RIB-API label information.

Parameters

label

Specifies the label of a specified RIB-API entry.

Values: 16 to 1048575

detail: Displays detailed RIB-API label information.

egress-stats: Displays egress statistics of all instances for the specified RIB-API label.

ingress-stats: Displays ingress statistics of all instances for the specified RIB-API label.

Platforms

All

Output

The following output is an example of RIB-API label information.

Sample Output

show router rib-api label 400001 egress-stats
===============================================================================
Label (Detail)
===============================================================================
Label          : 400001                 Rib-Api Pref   : 16
Client Ip      : 172.21.38.76           Client Tag     : 1
Active         : Y                      EgrStatsState  : Up
 Next-hop Group   : 1                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
 Next-hop Group   : 2                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000             
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000 
Total Aggr        :
   Aggr Pkts: 44000                    Aggr Octets: 46200000
-------------------------------------------------------------------------------
===============================================================================

label

Syntax

label label preference preference client-tag client-tag egress-stats

label label ingress-stats

Context

[Tree] (clear>router>rib-api label)

Full Context

clear router rib-api label

Description

Clears the egress or ingress statistics of the specified RIB-API label.

Parameters

label

Specifies the label of the specified RIB-API entry.

Values: 32 to 1048575

preference

Specifies the preference of the specified RIB-API entry.

Values: 0 to 4294967295

client-tag

Specifies the client tag of the specified RIB-API entry.

Values: 0 to 4294967295

egress: Specifies to only clear the egress statistics.

ingress: Specifies to only clear the ingress statistics.

Platforms

All

label

Syntax

label label

Context

[Tree] (tools>dump>router>rib-api label)

Full Context

tools dump router rib-api label

Description

This command configures the dump tools for RIB-API label.

Parameters

label

Specifies the label of the specified RIB-API entry.

Values: 32 to 1048575

Platforms

All

Output

The following output is an example of RIB-API label route information.

Sample Output

*A:Dut-B>config>service# /tools dump router rib-api label 30044 
 Db Mgr flags 0x80 ilmStatsFailCnt 0
---------------------------------------------------------------------------
 dbOwner RIB-API routeOwner 50 rsvdBlkId 3 flags 0x3 numPolicies 1 numInstalled 1
---------------------------------------------------------------------------
 Label DB 30044 
 dbFlags 0xd PathCount 1 srTunnelId 1015811 ilmStatsIdx[MGMT] 0x0 ilmStatsIdx[API] 0x0 
LABEL RESERVED:  PROGRAMMED
 Path bitmap 0
 Label Retry time left : 0 retrycount : 0,  SR Retry time left : 0 SR retrycount : 0
 Best Db Path owner 1 path name vrId:1, dbOwner:1, Client Tag:2 bindingLbl 30044 preference 246 Last Modified 02/07/2020 23:44:51 Up Time 0d 02:15:54
 Preference 246 flags 0x245 Status FWDPLCY_ERR_NA SR status SR_ERR_OK
 PrimResolved NH's 1 BkupResolved NH's 1
 NHGroup 2 
 flags 0x3bf9 : weight 0 normalized weight 0
 Revert timer 65535 Time left 0 NumOfReverts 0
 Hold timer 0 Time left 0 
DIRECT NH:  PRIM PGMED:  PRIM RESOLVED:  BKUP RESOLVED:  BKUP PGMED: 
 primaryNH 1.2.3.3 egrStatsIdx 0x0 Status FWDPLCY_NHERR_NA
 Label Stack:30055 0
 Nexthop 1 1.2.3.3 outIf 3 globalIfIndex 32 globaIfInNHgrp 32
 PG ID 0
 PG ID 5
 backupNH 1.2.3.33 egrStatsIdx 0x0 Status FWDPLCY_NHERR_NA
 Label stack:30255 0
 Nexthop 1 1.2.3.33 outIf 3 globalIfIndex 32 globaIfInNHgrp 32
 PG ID 0
 PG ID 6
 ---------------------------------------------------------------------
*A:Dut-B>config>service#

label

Syntax

label label preference preference client-tag client-tag egress-stats [ interval seconds] [repeat repeat] [{absolute | rate}]

Context

[Tree] (monitor>router>rib-api label)

Full Context

monitor router rib-api label

Description

This command monitors the egress statistics of the specified RIB-API label.

Parameters

label

Specifies the label of the specified RIB-API entry.

Values: 0 to 4294967295

preference

Specifies the preference of the specified RIB-API entry.

Values: 0 to 4294967295

client-tag

Specifies the client tag of the specified RIB-API entry.

Values: 0 to 4294967295

egress-stats: Specifies to monitor the egress statistics of the specified RIB-API label.

seconds

Configures the interval for each display in seconds.

Values: 3 to 60

repeat

Configures how many times the command is repeated.

Values: 1 to 999

absolute: Displays the absolute statistics of the specified RIB-API label.

rate: Displays the rate-per-second statistics of the specified RIB-API label.

Platforms

All

label-ipv4

Syntax

label-ipv4 [aspath-regex reg-exp] [community comm-id] [origin-val originState] [leaked] [leakable] [brief] [all]

label-ipv4 [aspath-regex reg-exp] hunt [community comm-id] [origin-val originState] [leaked] [leakable] [brief] [all]

label-ipv4 [detail | longer] [aspath-regex reg-exp [community comm-id] [origin-val originState] [leaked] [leakable] [all]

Context

[Tree] (show>router>bgp>routes label-ipv4)

Full Context

show router bgp routes label-ipv4

Description

This command displays BGP IPv4 routes.

Parameters

reg-exp: Displays routes with an AS path matching the specified regular expression reg-exp, up to 80 characters.

comm-id

Specifies community IDs, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
- {target | origin}:ip-address:comm-val
- {target | origin}:asnum:ext-comm-val
- {target | origin}:ext-asnum:comm-val
- bandwidth:asnum:val-in-mbps
- ext:4300:ovstate
- ex \t:value1:value2
- flowspec-set:ext-asnum:group-id
where:
- target — route target
- origin — route origin
- ip-address — a.b.c.d
- ext-comm-val — 0 to 4294967295
- ext-asnum — 0 to 4294967295
- bandwidth — bandwidth
- val-in-mbps — 0 to 16777215
- ext — extended
- ext:4300 — origin verification
- ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
- value1 — 0000 to FFFF
- value2 — 0 to FFFFFFFFFFFF
- flowspec-set — flow-spec set
- group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole

originState

Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.

Values

valid — Displays valid validation state information.

invalid — Displays invalid validation state information.

notfound — Displays state information for unfound origin values.

hunt: Displays entries for the specified route.

leaked: Filters the BGP routes displayed by the command to those routes leaked into this router’s BGP instance from another BGP instance.

leakable: Filters the BGP routes displayed by the command to those routes eligible for leaking from this router’s BGP instance to another BGP instance.

brief: Provides a summarized display of the set of peers to which a BGP route is advertised.

longer: Displays the specified route and subsets of the route.

detail: Display the longer, more detailed version of the output.

all: Displays output for all label BGP IPv4 routes.

Platforms

All

label-ipv6

Syntax

label-ipv6 [aspath-regex reg-exp] [ community comm-id] [origin-val originState] [leaked] [ leakable] [brief] [all]

label-ipv6 [aspath-regex reg-exp] hunt [community comm-id] [origin-val originState] [leaked] [leakable] [ brief] [all]

label-ipv6 [detail | longer] [aspath-regex reg-exp] [community comm-id] [origin-val originState] [leaked] [leakable] [ all]

Context

[Tree] (show>router>bgp>routes label-ipv6)

Full Context

show router bgp routes label-ipv6

Description

This command displays information about BGP IPv6 routes.

Parameters

reg-exp: Displays routes with an AS path matching the specified regular expression reg-exp, up to 80 characters.

comm-id

Specifies community IDs, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
- {target | origin}:ip-address:comm-val
- {target | origin}:asnum:ext-comm-val
- {target | origin}:ext-asnum:comm-val
- bandwidth:asnum:val-in-mbps
- ext:4300:ovstate
- ex \t:value1:value2
- flowspec-set:ext-asnum:group-id
where:
- target — route target
- origin — route origin
- ip-address — a.b.c.d
- ext-comm-val — 0 to 4294967295
- ext-asnum — 0 to 4294967295
- bandwidth — bandwidth
- val-in-mbps — 0 to 16777215
- ext — extended
- ext:4300 — origin verification
- ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
- value1 — 0000 to FFFF
- value2 — 0 to FFFFFFFFFFFF
- flowspec-set — flow-spec set
- group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole

originState

Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.

Values

valid — Displays valid validation state information.

invalid — Displays invalid validation state information.

notfound — Displays state information for unfound origin values.

hunt: Displays entries for the specified route.

leaked: Filters the BGP routes displayed by the command to those routes leaked into this router’s BGP instance from another BGP instance.

leakable: Filters the BGP routes displayed by the command to those routes eligible for leaking from this router’s BGP instance to another BGP instance.

brief: Provides a summarized display of the set of peers to which a BGP route is advertised.

longer: Displays the specified route and subsets of the route.

detail: Display the longer, more detailed version of the output.

all: Displays output for all label BGP IPv6 routes.

Platforms

All

Output

The following output an example of BGP routes label IPv6 information.

Sample Output

show router bgp routes label-ipv6 hunt 
------------------------------------------------------------------------------- 
RIB Out Entries 
------------------------------------------------------------------------------- 
Network        : 100::1/128 
Nexthop        : ::ffff:10.20.1.4 
Path Id        : None                    
To             : 10.20.1.6 
Res. Nexthop   : n/a 
Local Pref.    : 100                    Interface Name : NotAvailable 
Aggregator AS  : None                   Aggregator     : None 
Atomic Aggr.   : Not Atomic             MED            : 1 
AIGP Metric    : None                   IGP Cost       : n/a 
Connector      : None 
Community      : No Community Members 
Cluster        : No Cluster Members 
Originator Id  : None                   Peer Router Id : 10.20.1.6 
IPv6 Label     : 2 (Ipv6 Explicit-Null) Label Type     : POP 
Lbl Allocation : EXPLICIT-NULL           
Origin         : IGP                     
AS-Path        : No As-Path 
Route Tag      : 0                       
Neighbor-AS    : n/a 
Orig Validation: NotFound                
Source Class   : 0                      Dest Class     : 0 
Prefix SID     : index 2, originator-srgb [18450/16551] 
  
------------------------------------------------------------------------------- 
Routes : 1 
show router bgp routes label-ipv6 detail 
 
BGP Routes 
=============================================================================== 
Original Attributes 
  
Network        : 100::1/128 
Nexthop        : ::ffff:10.10.13.1 
Path Id        : None                    
From           : 10.10.13.1 
Res. Nexthop   : 10.10.13.1 
Local Pref.    : n/a                    Interface Name : to_A 
Aggregator AS  : None                   Aggregator     : None 
Atomic Aggr.   : Not Atomic             MED            : None 
AIGP Metric    : None                   IGP Cost       : 0 
Connector      : None 
Community      : No Community Members 
Cluster        : No Cluster Members 
Originator Id  : None                   Peer Router Id : 10.20.1.1 
Fwd Class      : None                   Priority       : None 
IPv6 Label     : 524287                  
Flags          : Used Valid Best IGP In-TTM In-RTM  
Route Source   : External 
AS-Path        : 100  
Route Tag      : 0                       
Neighbor-AS    : 100 
Orig Validation: NotFound                
Source Class   : 0                      Dest Class     : 0 
Add Paths Send : Default                 
RIB Priority   : Normal                  
Last Modified  : 00h00m29s

label-range

Syntax

label-range

Context

[Tree] (show>router>mpls-labels label-range)

Full Context

show router mpls-labels label-range

Description

This command displays the MPLS label range.

Platforms

All

Output

The following output is an example of MPLS label range information.

MPLS Label Range Output Fields describes the MPLS label range output fields.

Table 4. MPLS Label Range Output Fields
Label	Description
Label Type	Displays the information about static-lsp, static-svc, and dynamic label types.
Start Label	The label value assigned at the ingress router.
End Label	The label value assigned for the egress router.
Aging	The number of labels released from a service which are transitioning back to the label pool. Labels are aged 15 s.
Total Available	The number of label values available.

Sample Output

*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type      Start Label End Label   Aging       Available   Total
----------------------------------------------------------------------------
Static          32          18431       -           18400       18400
Dynamic         18432       524287      0           505443      505856
    Seg-Route   200501      200900      -           0           400
===========================================================================

label-type

Syntax

label-type start-label start-label [end-label end-label] label-type [family]

Context

[Tree] (show>router>ldp>bindings label-type)

Full Context

show router ldp bindings label-type

Description

This command displays LDP FEC bindings by matching labels.

Parameters

start-label

Specifies a label value to begin the display.

Values: 16 to 1048575

end-label

Specifies a label value to end the display.

Values: 17 to 1048575

family

Displays either IPv4 or IPv6 LDP information.

Platforms

All

labels

Syntax

labels

Context

[Tree] (show>service>id labels)

Full Context

show service id labels

Description

This command displays the labels being used by the service.

Platforms

All

Output

The following output is an example of service label information.

Sample Output

A:ALA-12# show service id 1 labels
============================================================================== 
Martini Service Labels                                                          
============================================================================== 
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                           
------------------------------------------------------------------------------ 
1          10:1               Mesh 0            0                               
1          20:1               Mesh 0            0                               
1          30:1               Mesh 0            0                               
1          40:1               Mesh 130081       131061                          
1          60:1               Mesh 131019       131016                          
1          100:1              Mesh 0            0                               
------------------------------------------------------------------------------ 
Number of Bound SDPs : 6                                                       
------------------------------------------------------------------------------ 
A:ALA-12#

Service-ID Labels Field Descriptions describes show service-id labels output fields:

Table 5. Service-ID Labels Field Descriptions
Label	Description
Svc Id	The service identifier
Sdp Id	The SDP identifier
Type	The SDP type, spoke or mesh
I. Lbl	The VC label used by the far-end device to send packets to this device in this service by the SDP
E. Lbl	The VC label used by this device to send packets to the far-end device in this service by the SDP

lacp-partner

Syntax

lacp-partner

lacp-partner detail

Context

[Tree] (show>lag lacp-partner)

Full Context

show lag lacp-partner

Description

This command displays LACP partner information.

Parameters

detail: Displays detailed information.

Platforms

All

lag

Syntax

lag [lag-id] [detail] [statistics]

lag [lag-id] [detail] [lacp-statistics]

lag [lag-id] description

lag [lag-id] egress-rate-distribution

lag [lag-id] port

lag lag-id associations per-link-hash interface [class {1 | 2 | 3}]

lag lag-id associations

lag lag-id bfd

lag lag-id [detail] eth-cfm [tunnel tunnel-id]

lag lag-idflow-distribution

lag lag-id associations per-link-hash interface

lag lag-id associations link-map-profile [link-map-profile] interface

lag lag-id lacp-partner

lag lag-id detail lacp-partner

lag lag-id link-map-profile link-map-profile

lag lag-idper-link-hash [class {1 | 2 | 3}]

lag lag-id associations per-link-hash sap [class {1 | 2 | 3}]

lag lag-id associations link-map-profile [link-map-profile] sap

lag lag-id per-link-hash port port-id

Context

[Tree] (show lag)

Full Context

show lag

Description

This command displays Link Aggregation Group (LAG) information.

If no command line options are specified, a summary listing of all LAGs is displayed.

Parameters

lag-id

Displays only information on the specified LAG ID.

Values: 1 to 800

Default: Displays information for all LAG IDs.

detail

Displays detailed LAG information.

Default: Displays summary information.

statistics: Displays LAG statistics information.

lacp-statistics: Displays the number of LACP PDUs transmitted and received per LAG port.

description: Displays the user-defined description for the LAG.

egress-rate-distribution: Displays the egress traffic rate in kb/s per LAG port.

port: Displays port information.

associations: Displays a list of current router interfaces to which the LAG is assigned.

interface: Displays interface information.

bfd: Displays per-member BFD information.

eth-cfm: Displays a list of Ethernet tunnels to which the LAG is assigned.

tunnel-id

Filters ETH-CFM MEP information to one tunnel.

Values: 1 to 4094

flow-distribution

Displays the flow distribution per active LAG port in a given LAG. The operator can control the flow distribution per LAG by configuring a hash-weight value on each ports of a LAG.

Inactive LAG ports are not displayed.

per-link-hash: Displays information about a SAP or interface associated with this LAG sends traffic over a single link of a LAG auto-re-balancing as links are added and removed from this LAG.

lacp-partner: Displays LACP partner information.

link-map-profile

Displays information about a specified LAG link map profile.

Values: 1 to 64

sap: Displays SAP information.

port-id

Specifies the port ID.

Values: slot/mda/port

Platforms

All

Output

See the following sections for output samples:

The following outputs are examples of lag information, and the associated tables describe the output fields.

Sample Output: show lag

A:7750# show lag
===============================================================================
Lag Data
===============================================================================
Lag-id         Adm     Opr     Weighted Threshold Up-Count MC Act/Stdby
    name
-------------------------------------------------------------------------------
1              up      down    No       0         0        active
    lag-1
2              up      down    No       0         0        N/A
    lag-2
-------------------------------------------------------------------------------
Total Lag-ids: 2       Single Chassis: 1        MC Act: 1       MC Stdby: 0
===============================================================================

Output Fields: show lag

Output Fields: show lag describes the output fields for the show lag command.

Table 6. Output Fields: show lag
Label	Description
Lag-id	The LAG or multi-link bundle ID that the port is assigned to.
Lag-name	The LAG name.
Adm	Up — The LAG is administratively up. Down — The LAG is administratively down.
Opr	Up — The LAG is operationally up. Down—The LAG is operationally down.
Threshold	The number of operational links for the LAG at or below which the configured action is invoked.
Up-Count	The number of ports that are physically present and have physical links present.
MC Act/Stdby	Member port is selected as active or standby link.

Sample Output: show lag <lag-id> detail

A:Dut-B# show lag  1 detail
===============================================================================
LAG Details
===============================================================================
Description        : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 1                     Mode                 : access
Lag-name            : lag-1
Adm                 : up                    Opr                  : down
Thres. Last Cleared : 04/12/2021 12:21:41   Thres. Exceeded Cnt  : 0
Dynamic Cost        : false                 Encap Type           : null
Configured Address  : e2:e5:ff:00:01:41     Lag-IfIndex          : 1342177281
Hardware Address    : e2:e5:ff:00:01:41     Adapt Qos (access)   : distribute
Hold-time Down      : 0.0 sec               Port Type            : standard
Per-Link-Hash       : disabled
Include-Egr-Hash-Cfg: disabled              Forced               : -
Per FP Ing Queuing  : disabled              Per FP Egr Queuing   : disabled
Per FP SAP Instance : disabled
Access Bandwidth    : N/A                   Access Booking Factor: 100
Access Available BW : 0
Access Booked BW    : 0
LACP                : enabled               Mode                 : passive
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria  : highest-count         Slave-to-partner     : disabled
MUX control         : coupled
Subgrp hold time    : 0.0 sec               Remaining time       : 0.0 sec
Subgrp selected     : MC peer               Subgrp candidate     : -
Subgrp count        : 1
System Id           : e2:e5:ff:00:00:00     System Priority      : 32768
Admin Key           : 32768                 Oper Key             : 1
Prtr System Id      : e2:f2:ff:00:00:00     Prtr System Priority : 1000
Prtr Oper Key       : 32768
Standby Signaling   : lacp
Port hashing        : port-speed            Port weight speed    : 0 gbps
Ports Up            : 0
Weights Up          : 0                     Hash-Weights Up      : 0
Monitor oper group  : N/A
Adaptive loadbal.   : disabled              Tolerance            : N/A
MC Peer Address     : 3.3.3.3               MC Peer Lag-id       : 1
MC System Id        : 00:00:00:00:00:01     MC System Priority   : 100
MC Admin Key        : 1                     MC Active/Standby    : standby
MC Lacp ID in use   : true                  MC extended timeout  : false
MC Selection Logic  : local master decided
MC Config Mismatch  : no mismatch
-------------------------------------------------------------------------------
Port-id        Adm     Act/Stdby Opr     Primary   Sub-group     Forced  Prio
-------------------------------------------------------------------------------
1/1/3          up      standby   down    yes       1             -       32768
1/1/4          up      standby   down              1             -       32768
-------------------------------------------------------------------------------
Port-id        Role      Exp   Def   Dist  Col   Syn   Aggr  Timeout  Activity
-------------------------------------------------------------------------------
1/1/3          actor     No    No    No    No    No    Yes   Yes      No
1/1/3          partner   No    No    No    No    Yes   Yes   Yes      Yes
1/1/4          actor     No    No    No    No    No    Yes   Yes      No
1/1/4          partner   No    No    No    No    Yes   Yes   Yes      Yes
===============================================================================

Output Fields: show lag <lag-id> detail

Output Fields: show lag <lag-id> detail describes the output fields for the show lag lag-id detail command. The output is dependent on whether or not the LAG was configured as a multi-chassis (MC) LAG.

Table 7. Output Fields: show lag <lag-id> detail
Label	Description
Lag-id	The LAG identification.
Lag-name	The LAG name.
Mode	The LAG mode: access hybrid network
Adm	Administrative state of the LAG. Up — The LAG is administratively up. Down — The LAG is administratively down.
Opr	Operational state of the LAG. Up — The LAG is operationally up. Down — The LAG is operationally down.
Thres. Last Cleared	The last time that port or weight thresholds were cleared: when there is a falling or rising hit when they are configured and immediately reached when they are not configured when reached Not cleared by the threshold cfg or deconfig command when the port or weight threshold is removed. The port or weight threshold can then be configured but not immediately reached.
Thres. Exceeded Cnt	The number of times that the weight or port threshold rising counter was reached. The Thresh. Exceed counter displays the rising counter, as the falling counter is only available via SNMP. When we configure or deconfigure the port or weight threshold, the Thresh. Exceed counter is set to 0.
Dynamic Cost	Enabled — Dynamic cost is enabled. Disabled — Dynamic cost is disabled.
Encap Type	The LAG port encapsulation type: dot1q null qinq
Configured Address	The configured Ethernet MAC address.
Lag-IfIndex	A box-wide unique number assigned to this interface.
Hardware Address	The Ethernet MAC address.
Adapt Qos (access)	Displays the configured QoS mode: distribute link port-fair
Hold-Time Down	The timer, in tenths of seconds, which controls the delay between detecting that a LAG is down and reporting it to the higher levels.
Port Type	The port type: hs standard
Per-Link-Hash	Enabled — Per link hash is enabled. Disabled — Per link hash is disabled.
Include-Egr-Hash-Cfg	The explicitly configured hashing that is included to the egress buffering and rate distribution.
Per FP Ing Queuing	The per FP ingress queuing status.
Per FP Egr Queuing	The per FP egress queuing status.
Per FP SAP Instance	The per FP SAP instance status.
Access Bandwidth	The LAG access bandwidth value.
Access Booking Factor	The LAG access booking factor.
Access Available BW	The access available bandwidth.
Access Booked BW	The access booked bandwidth.
LACP	Enabled — LACP is enabled. Down — LACP is disabled.
LACP Transmit Intvl	The LACP transmit interval mode.
LACP xmit stdby	The LACP transmit standby mode.
Selection Criteria	Configured LAG selection criteria.
Slave-to-partner	The LACP slave-to-partner enabled or disabled state.
MUX control	Configured type of multiplexing machine control used in a LAG with LACP in active/passive modes. coupled — TX and RX activate together. independent — RX activates independent of TX.
Subgrp hold time	The sub-group hold time value.
Remaining time	The sub-group remaining time value.
Subgrp selected	The number of sub-group selected in this LAG.
Subgrp candidate	The sub-group candidate.
Subgrp count	The number of sub-group configured in this LAG.
System Id	System ID used by actor in LACP messages.
System Priority	System priority used by actor in LACP messages.
Admin Key	Configured LAG key.
Oper Key	Key used by actor in LACP messages.
Prtr System Id	System ID used by partner in LACP messages.
Prtr System Priority	System priority used by partner in LACP messages.
Prtr Oper Key	Key used by partner in LACP messages.
Standby Signaling	The standby signaling mode used in this LAG.
Port hashing	Displays the LAG port hashing mechanism for flow distribution per LAG port. port-speed — the port hashing value is inherited from the port speed hash-weight — the LAG port hash-weight value is used to customize flow distribution per port
Port weight speed	The LAG port weight speed value for mixed-speed LAG.
Ports Up	The number of ports that are operationally up for this LAG.
Weights Up	Sum of weights for ports that are operationally up in this LAG.
Hash-Weights Up	Sum of hash weights for ports that are operationally up in this LAG.
Threshold Type	The type of threshold used in this LAG: hash-weight-threshold port-threshold weight-threshold
Monitor oper group	The name of the operational group being monitored for this LAG.
Adaptive loadbal	The adaptive load balancing status. Enabled — The adaptive load balancing is enabled. Disabled — The adaptive load balancing is disabled.
Tolerance	The adaptive load balancing tolerance value.
Interval	The adaptive load balancing statistics pooling interval.
MC Peer Address	The multi-chassis peer IP address.
MC Peer Lag-id	The LAG ID for the multi-chassis peer.
MC System Id	The multi-chassis LAG system identifier MAC address.
MC System Priority	The multi-chassis LAG system priority.
MC Admin Key	The multi-chassis LAG administrative key.
MC Active/Standby	The multi-chassis LAG active or standby state.
MC Lacp ID in use	The multi-chassis LAG in use state.
MC extended timeout	The multi-chassis LAG extended timeout value.
MC Selection Logic	The multi-chassis LAG selection logic state.
MC Config Mismatch	The multi-chassis LAG configuration mismatch state.

Sample Output: Show LAG Statistics

===============================================================================
LAG Statistics
===============================================================================
-------------------------------------------------------------------------------
Lag-id : 1 Lag-name : lag-1
-------------------------------------------------------------------------------
Description        : N/A
Port-id       Input(Packets)                   Output(Packets)
              Input(Bytes)                     Output(Bytes)
              Input Errors                     Output Errors
-------------------------------------------------------------------------------
1/1/4         0                                0
              0                                0
              0                                0
-------------------------------------------------------------------------------
Totals        0                                0
              0                                0
              0                                0
===============================================================================

Output Fields: Show LAG Statistics

Output Fields: Show LAG Statistics describes the output fields for the show lag statistics command.

Table 8. Output Fields: Show LAG Statistics
Label	Description
Lag-id	The LAG or multi-link trunk (MLT) that the port is assigned to.
Lag-name	The LAG name.
Port-id	The port ID.
Input Bytes	The number of incoming bytes for the LAG on a per-port basis.
Input Packets	The number of incoming packets for the LAG on a per-port basis.
Output Bytes	The number of outbound bytes for the LAG on a per-port basis.
Output Packets	The number of outbound packets for the LAG on a per-port basis.
Input/Output Errors	For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.
Totals	Displays the column totals for bytes, packets, and errors.

Sample Output: show lag <lag-id> egress-rate-distribution

A:7750# show lag 1 egress-rate-distribution 
===============================================================================
Distribution of egress rate by adaptive load balancing
===============================================================================
Port                                                      Egress-rate (kbps)
-------------------------------------------------------------------------------
8/1/71                                                    43186
8/1/72                                                    43186
8/1/73                                                    38387
===============================================================================

Output Fields: show lag <lag-id> egress-rate-distribution

Output Fields: show lag <lag-id> egress-rate-distribution describes the output fields for the show lag <lag-id> egress-rate-distribution command.

Table 9. Output Fields: show lag <lag-id> egress-rate-distribution
Label	Description
Port	The LAG member port.
Egress-rate	Total egress traffic rate of the LAG port from the last scan interval.

Sample Output: show lag <lag-id> lacp-statistics

A:7750>config>lag# show lag 1 lacp-statistics

==============================================================================
LAG LACP Statistics
===============================================================================
LAG-id    Port-id        Tx         Rx         Rx Error   Rx Illegal
                        (Pdus)     (Pdus)     (Pdus)     (Pdus)
-------------------------------------------------------------------------------
1         1/1/3          20305      20291      0          0
1         1/1/4          20304      20292      0          0
1         1/1/13         20303      20284      0          0
1         1/1/14         20303      20284      0          0
-------------------------------------------------------------------------------
Totals                   81215      81151      0          0
===============================================================================

Output Fields: show lag <lag-id> lacp-statistics

Output Fields: show lag <lag-id> lacp-statistics describes the output fields for the show lag <lag-id> lacp-statistics command.

Table 10. Output Fields: show lag <lag-id> lacp-statistics
Label	Description
LAG-id	The LAG ID that the port is assigned to.
Port-id	The port ID.
Tx (Pdus)	The number of LACP PDUs transmitted.
Rx (Pdus)	The number of LACP PDUs received.
Rx Error (Pdus)	The number of LACP PDUs received when admin-down or when LACP is not enabled.
Rx Illegal (Pdus)	The number of illegal packets received.

Sample Output: Show lag <lag-id> flow-distribution

A:Dut-A# show lag 3 flow-distribution
===============================================================================
Distribution of allocated flows
===============================================================================
Port                        Bandwidth (Gbps) Hash-weight  Flow-share (%)
-------------------------------------------------------------------------------
1/1/1                       10.000           300          37.50
1/1/2                       10.000           500          62.50
-------------------------------------------------------------------------------
Total operational bandwidth: 20.000
===============================================================================

Output Fields: show lag <lag-id> flow-distribution

Output Fields: show lag <lag-id> flow-distribution describes the output fields for the show lag flow-distribution command.

Table 11. Output Fields: show lag <lag-id> flow-distribution
Label	Description
Bandwidth	The physical bandwidth speed per active LAG port.
Hash-Weight	The hash-weight value configured or inherited from port-speed on this LAG port.
Flow-Share	The traffic flow distribution per active LAG port.

Sample Output: Show lag <lag-id> associations

A:ALA-1# show lag 5 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId                Name                            Encap Val
------------------------------------------------------------------------------
Router: Base                    LAG2West                        0
------------------------------------------------------------------------------
Interfaces
==============================================================================
A:ALA-1#

Output Fields: Show lag <lag-id> associations

Output Fields: Show lag <lag-id> associations describes the output fields for the show lag <lag-id> associations command.

Table 12. Output Fields: Show lag <lag-id> associations
Label	Description
Service ID	The service associated with the LAG.
Name	The name of the IP interface.
Encap Val	The Dot1q or QinQ values of the port for the IP interface.

Sample Output: Show lag <lag-id> detail (with MC-LAG Output)

A:Dut-C# show lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description        : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 1                     Mode                 : access
Adm                 : up                    Opr                  : up
Thres. Last Cleared : 09/16/2019 23:27:40   Thres. Exceeded Cnt  : 2
Dynamic Cost        : false                 Encap Type           : null
Configured Address  : 10:0e:ff:00:01:41     Lag-IfIndex          : 1342177281
Hardware Address    : 10:0e:ff:00:01:41     Adapt Qos (access)   : distribute
Hold-time Down      : 0.0 sec               Port Type            : standard
Per-Link-Hash       : disabled
Include-Egr-Hash-Cfg: disabled              Forced               : -
Per FP Ing Queuing  : disabled              Per FP Egr Queuing   : disabled
Per FP SAP Instance : disabled
Access Bandwidth    : N/A                   Access Booking Factor: 100
Access Available BW : 0
Access Booked BW    : 0
LACP                : enabled               Mode                 : passive
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria  : highest-count         Slave-to-partner     : disabled
MUX control         : coupled
Subgrp hold time    : 1.0 sec               Remaining time       : 0.0 sec
Subgrp selected     : 2                     Subgrp candidate     : -
Subgrp count        : 1
System Id           : 10:0e:ff:00:00:00     System Priority      : 32768
Admin Key           : 32768                 Oper Key             : 1
Prtr System Id      : 1e:0e:ff:00:00:00     Prtr System Priority : 32768
Prtr Oper Key       : 32768
Standby Signaling   : lacp
Port hashing        : port-speed            Port weight speed    : 0 gbps
Ports Up            : 2
Weights Up          : 2                     Hash-Weights Up      : 2
Threshold Type      : hash-weight-threshold
  Value             : 1
  Action            : down
  Cost              : N/A
Monitor oper group  : N/A
MC Peer Address     : 2.2.2.2               MC Peer Lag-id       : 1
MC System Id        : 00:00:00:00:00:01     MC System Priority   : 100
MC Admin Key        : 1                     MC Active/Standby    : active
MC Lacp ID in use   : true                  MC extended timeout  : false
MC Selection Logic  : local master decided
MC Config Mismatch  : no mismatch
-------------------------------------------------------------------------------
Port-id        Adm     Act/Stdby Opr     Primary   Sub-group     Forced  Prio
-------------------------------------------------------------------------------
1/1/13         up      active    up      yes       2             -       32768
1/1/14         up      active    up                2             -       32768
-------------------------------------------------------------------------------
Port-id        Role      Exp   Def   Dist  Col   Syn   Aggr  Timeout  Activity
-------------------------------------------------------------------------------
1/1/13         actor     No    No    Yes   Yes   Yes   Yes   Yes      No
1/1/13         partner   No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/14         actor     No    No    Yes   Yes   Yes   Yes   Yes      No
1/1/14         partner   No    No    Yes   Yes   Yes   Yes   Yes      Yes
===============================================================================

Sample Output: show lag <lag-id> lcap-partner

A:ALU-Dut1# show lag 3 lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID           : ea:3e:ff:00:00:00
Partner system priority     : 32768
Partner operational key     : 2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational information
===============================================================================
Port                        Actor Port  Prio  Key
                            port
-------------------------------------------------------------------------------
1/1/52                      33908 33909 5     2
1/1/54                      33910 33911 5     2
1/1/56                      33912 33913 7     2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational state information
===============================================================================
Port                        Exp  Def  Dist Col  Syn  Aggr Time Act
                                                          out
-------------------------------------------------------------------------------
1/1/52                      No   No   Yes  Yes  Yes  Yes  Yes  Yes
1/1/54                      No   No   Yes  Yes  Yes  Yes  Yes  Yes
1/1/56                      No   No   No   No   No   Yes  Yes  Yes
===============================================================================
A:ALU-Dut1# 


A:Dut-A# show lag 10 lacp-neighbors 
===============================================================================
LAG Neighbor information
===============================================================================
Partner system ID           : de:41:ff:00:00:00
Partner system priority     : 32768
Partner operational key     : 32768
===============================================================================
-------------------------------------------------------------------------------
LAG port 1/1/6 partner information
-------------------------------------------------------------------------------
Actor port                  : 33862
Partner admin system prio   : 32768
Partner oper system prio    : 32768
Partner admin system ID     : 00:00:00:00:00:00
Partner oper system ID      : de:41:ff:00:00:00
Partner admin key           : 0
Partner oper key            : 32768
Partner admin port          : (Not Specified)
Partner oper port           : 33863
Partner admin port prio     : 32768
Partner oper port prio      : 32768
Partner admin state         : (Not Specified)
Partner oper state          : lacp-timeout aggregation synchronization
                              collecting distributing
===============================================================================
A:Dut-A#


*A:bksim4001>config>lag# selection-criteria highest-weight subgroup-hold-
time 1show lag 1 detail                                         
ght subgroup-hold-time 10 
===============================================================
LAG Details
===============================================================
Description        : To Sim4002
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 1                       Mode                 : access
Adm                 : down                  Opr                  : down
Thres. Exceeded Cnt : 0                     Port Threshold       : 0
Thres. Last Cleared : 01/21/2014 09:00:48   Threshold Action     : down
Dynamic Cost        : false                 Encap Type           : null
Configured Address  : 36:95:ff:00:01:41     Lag-IfIndex          : 1342177281
Hardware Address    : 36:95:ff:00:01:41     Adapt Qos (access)   : distribute
Hold-time Down      : 0.0 sec               Port Type            : standard
Per-Link-Hash       : disabled              
Include-Egr-Hash-Cfg: enabled               
Per FP Ing Queuing  : disabled              Per FP Egr Queuing   : disabled
Per FP SAP Instance : disabled              
LACP                        : enabled               Mode                 : passive
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria      : highest-weight        Slave-to-partner     : disabled
Subgrp hold time    : 20.0 sec               Remaining time        : 2.6 sec
Subgrp selected       : 1                     Subgrp candidate     : 2
Subgrp count            : 2                     Forced               : -
System Id                 : 36:95:ff:00:00:00     System Priority      : 32768
Admin Key              : 32768                 Oper Key             : 32768
Prtr System Id          :                        Prtr System Priority : 0
Prtr Oper Key          : 0                     
Standby Signaling   : lacp                  
Port weight (gbps)   : (Not Specified)       
Weight Threshold    : 0                     Threshold Action     : down
...
===============================================================================


*A:Dut-A# show lag 2 associations per-link-hash sap
===============================================================================
SAP Associations
===============================================================================
SvcId      SAP                          Active Link            Oper   Oper
                                                               Class  Weight
-------------------------------------------------------------------------------
2          lag-2:4                          1/1/1               1      500
2          lag-2:5                          1/1/1               1      100
2          lag-2:6                          1/1/26              1      1000
2          lag-2:7                          1/1/25              1      1000
===============================================================================
Number of SAP associations: 4

A:bksim4001# show lag 1  per-link-hash         
===============================================================================
Per-link-hash Weight
===============================================================================
Port                             Class      Num Users  Agg Weight
-------------------------------------------------------------------------------
1/1/1                            1          10                      10
1/1/1                            2          0          0
1/1/1                            3          2          500
===============================================================================
Number of entries: 3
===============================================================================

lag

Syntax

lag lag-id network-aggregate-qos-stats

Context

[Tree] (show>qos lag)

Full Context

show qos lag

Description

This command displays the aggregate QoS statistics for the default ingress and egress queues configured on a network interface LAG.

Parameters

lag-id

Displays only information about the specified LAG ID.

Values: 1 to 800

network-aggregate-qos-stats: Displays the aggregate QoS statistics about network interface LAG queues.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following is an example of network aggregate QoS statistics information.

QoS Lag Field Descriptions describes the output fields.

Sample Output

*A:PE# show qos lag 1 network-aggregate-qos-stats
===============================================================================
Network Aggregate QoS Statistics for LAG ID 1
===============================================================================
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    320                     160000
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    997022                  127618816
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
-------------------------------------------------------------------------------

Table 13. QoS Lag Field Descriptions
Label	Description
In Profile forwarded	Displays the number of in-profile packets or octets forwarded for ingress or egress queue
In Profile dropped	Displays the number of in-profile packets or octets dropped for ingress or egress queue
Out Profile forwarded	Displays the number of out-profile packets or octets forwarded for ingress or egress queue
Out Profile dropped	Displays the number of out-profile packets or octets dropped for ingress or egress queue

lag

Syntax

lag lag-id bfd-session family {ipv4 | ipv6} lag-port port-id

lag lag-id lacp-statistics

lag lag-id statistics

Context

[Tree] (clear lag)

Full Context

clear lag

Description

This command clears statistics for the specified LAG ID.

Parameters

lag-id

Clears the LAG ID.

Values: 1 to 800

bfd-session: Clears the specified BFD session.

family: Clears the IP address family.

ipv4: Clears IPv4.

ipv6: Clears IPv6.

port-id

Clears the port ID.

Values: slot [/mda [/port]]

lacp-statistics: Clears the LACP PDUs statistics.

statistics: Clears the statistics or the BFD session for the specified LAG ID.

Platforms

All

lag

Syntax

lag lag-id lag-id

Context

[Tree] (tools>dump lag)

Full Context

tools dump lag

Description

This command dumps LAG information.

Parameters

lag-id

Specifies the LAG ID.

Values: 1 to 800

Platforms

All

lag

Syntax

lag

Context

[Tree] (tools>perform lag)

Full Context

tools perform lag

Description

This command provides tools for controlling LAG.

Platforms

All

lag

Syntax

lag lag-id [lag-id] [bytes | packets | errors | utilization] [interval seconds] [repeat repeat] [absolute | rate]

lag lag-id network-aggregate-qos-stats [interval seconds] [ repeat repeat] [absolute | rate]

Context

[Tree] (monitor lag)

Full Context

monitor lag

Description

This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statistical information for the specified LAG ID(s) displays at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified LAG ID. The subsequent statistical information listed for each interval is displayed as a delta to the previous display. When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.

Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.

Parameters

lag-id

Specifies the number of the LAG, with a maximum of five LAG numbers specified in a single statement.

Values: 1 to 200

bytes: Displays the statistics in bytes only.

packets: Displays the statistics in packets only.

errors: Displays the statistics for errors only.

utilization: Displays the statistics in percentage utilization only.

network-aggregate-qos-stats: Monitors the aggregate QoS statistics on network interface LAG default ingress and egress queues.

seconds

Configures the interval for each display in seconds.

Values: 3 to 60

Default: 10 seconds

repeat

Configures how many times the command is repeated.

Values: 1 to 999

Default: 10

absolute: Specifies raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

Platforms

All

Output

The following output is an example of monitor lag command information.

Sample Output

A:Dut-B# monitor lag 1 interval 3 repeat 1
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id      Input packets                    Output packets
             Input bytes                      Output bytes
             Input errors [Input util %]      Output errors [Output util %]
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1        24                               25
             2224                             2294
             0                                0
1/2/2        25                               8
             2170                             776
             0                                0
-------------------------------------------------------------------------------
Totals       49                               33
             4394                             3070
             0                                0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1        3                                3
             306                              306
             0                                0
1/2/2        0                                0
             0                                0
             0                                0
-------------------------------------------------------------------------------
Totals       3                                3
             306                              306
             0                                0
===============================================================================


A:Dut-B# monitor lag 1 interval 3 repeat 1 bytes
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id      Input bytes                      Output bytes
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1        6100                             6170
1/2/2        2514                             1120
-------------------------------------------------------------------------------
Totals       8614                             7290
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1        306                              306
1/2/2        0                                0
-------------------------------------------------------------------------------
Totals       306                              306
===============================================================================

The following is an example of network aggregate QoS statistics information.

Sample Output

*A:PE# monitor lag 1 network-aggregate-qos-stats repeat 1
===============================================================================
Monitor Network Aggregate QoS Statistics for LAG ID 1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    2124815                 271976320
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    1109568                 1420247040
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
===============================================================================
*A:PE# monitor lag 1 network-aggregate-qos-stats rate repeat 1
===============================================================================
Monitor Network Aggregate QoS Statistics for LAG ID 1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Rate)
-------------------------------------------------------------------------------
                        Packets/sec             Octets/sec              % Port
                                                                        Util.
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0               0.00
     In Profile dropped    :    0                       0               0.00
     Out Profile forwarded :    97675                   12502383        1.00
     Out Profile dropped   :    0                       0               0.00
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0               0.00
     In Profile dropped    :    0                       0               0.00
     Out Profile forwarded :    0                       0               0.00
     Out Profile dropped   :    0                       0               0.00
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0               0.00
     In Profile dropped    :    0                       0               0.00
     Out Profile forwarded :    0                       0               0.00
     Out Profile dropped   :    0                       0               0.00
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0               0.00
     In/Inplus Prof dropped:    0                       0               0.00
     Out/Exc Prof fwded    :    0                       0               0.00
     Out/Exc Prof dropped  :    0                       0               0.00
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0               0.00
     In/Inplus Prof dropped:    0                       0               0.00
     Out/Exc Prof fwded    :    97661                   12500639        1.00
     Out/Exc Prof dropped  :    0                       0               0.00
===============================================================================

lanext

Syntax

lanext

Context

[Tree] (show>subscr-mgmt>vrgw lanext)

Full Context

show subscriber-mgmt vrgw lanext

Description

This command displays Wireless LAN Gateway Home LAN Extension information.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

lanext

Syntax

lanext

Context

[Tree] (tools>dump>wlan-gw lanext)

Full Context

tools dump wlan-gw lanext

Description

Commands in this context dump tools information for WGLAN HLE parameter.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

lanext

Syntax

lanext

Context

[Tree] (tools>perform>wlan-gw lanext)

Full Context

tools perform wlan-gw lanext

Description

Commands in this context clear tools information for WGLAN HLE parameter.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

lbm-svc-act-responder

Syntax

lbm-svc-act-responder [domain md-index] [association ma-index] [mep mep-id]

Context

[Tree] (show>eth-cfm lbm-svc-act-responder)

Full Context

show eth-cfm lbm-svc-act-responder

Description

This command displays all the MEPs that have been created with this optional parameter, which allocates additional resources to facilitate high-speed LBM-to-LBR processing typically used during service activation testing. The optional filters are cumulative. These filters can be used to narrow the focus of the display to a specific area.

Parameters

md-index

Displays the MD index.

Values: 1 to 4294967295

ma-index

Displays the MA index.

Values: 1 to 4294967295

mep-id

Displays the local MEP ID.

Values: 1 to 8191

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following is an example of ETH CFM lbm-svc-act-responder information.

ETH-CFM lbm-service-act-responder Field Descriptions describes the output fields:

Sample Output

show eth-cfm lbm-svc-act-responder                                            
==============================================================================
Eth-CFM Local MEP LBM Service Activation Responder Enabled                    
==============================================================================
MdIndex    MaIndex    MepId  SrcMacAddress                                    
------------------------------------------------------------------------------
14         1000       28     d8:1c:ff:00:00:00                                
------------------------------------------------------------------------------
No. of MEPs: 1                                                                
==============================================================================

Table 14. ETH-CFM lbm-service-act-responder Field Descriptions
Label	Description
MdIndex	Displays the Maintenance Domain (MD) index value
MaIndex	Displays the MA index value
MepId	Displays the maintenance association endpoint identifier
SrcMacAddress	Displays the source MAC address

ldp

Syntax

ldp

Context

[Tree] (clear>router ldp)

Full Context

clear router ldp

Description

Commands in this context set the hold-time during which new auto-rx targeted peers are not generated.

Platforms

All

ldp

Syntax

ldp

Context

[Tree] (show>router ldp)

Full Context

show router ldp

Description

This command displays LDP information.

Platforms

All

ldp

Syntax

ldp

Context

[Tree] (tools>dump>router ldp)

Full Context

tools dump router ldp

Description

Commands in this context dump tools for LDP protocol instance.

Platforms

All

ldp

Syntax

ldp

Context

[Tree] (monitor>router ldp)

Full Context

monitor router ldp

Description

This command monitors commands for the LDP instance.

Platforms

All

ldp fec-egress-statistics

Syntax

ldp fec-egress-statistics [ip-prefix/mask]

Context

[Tree] (clear>router ldp fec-egress-statistics)

Full Context

clear router ldp fec-egress-statistics

Description

This command clears LDP FEC egress statistics.

Parameters

ip-prefix: Specify information for the specified IP prefix. Host bits must be 0.

mask

Specifies the address mask used to indicate the bits of an IP address that are being used for the subnet address.

Values

IPv4: 0 to 32

IPv6: 0 to 128

Platforms

All

ldp-sync-exit

Syntax

ldp-sync-exit

Context

[Tree] (tools>perform>router>isis ldp-sync-exit)

Full Context

tools perform router isis ldp-sync-exit

Description

This command terminates LDP synchronization and restores actual cost of an ISIS interface.

Platforms

All

ldp-sync-exit

Syntax

ldp-sync-exit

Context

[Tree] (tools>perform>router>ospf ldp-sync-exit)

[Tree] (tools>perform>router>ospf3 ldp-sync-exit)

Full Context

tools perform router ospf ldp-sync-exit

tools perform router ospf3 ldp-sync-exit

Description

This command terminates LDP synchronization and restore actual cost of an OSPF interface.

Platforms

All

ldp-treetrace

Syntax

ldp-treetrace [prefix ip-prefix/mask] [detail]

Context

[Tree] (show>test-oam ldp-treetrace)

Full Context

show test-oam ldp-treetrace

Description

This command displays OAM LDP treetrace information.

Parameters

ip-prefix/mask

Specifies the address prefix and subnet mask of the destination node.

Values

ip-prefix: a.b.c.d (host bits must be 0)

mask: 0 to 32

detail: Displays detailed information.

Platforms

All

Output

The following sample output shows OAM LDP treetrace information.

Sample Output

*A:ALA-48# show test-oam ldp-treetrace
Admin State              : Up             Discovery State      : Done          
Discovery-intvl (min)    : 60             Probe-intvl (min)    : 2             
Probe-timeout (min)      : 1              Probe-retry          : 3             
Trace-timeout (sec)      : 60             Trace-retry          : 3             
Max-TTL                  : 30             Max-path             : 128           
Forwarding-class (fc)    : be             Profile              : Out           
Total Fecs               : 400            Discovered Fecs      : 400           
Last Discovery Start     : 12/19/2006 05:10:14                                 
Last Discovery End       : 12/19/2006 05:12:02                                 
Last Discovery Duration  : 00h01m48s                                           
Policy1                  : policy-1                                            
Policy2                  : policy-2 

*A:ALA-48# show test-oam ldp-treetrace detail
Admin State              : Up             Discovery State      : Done          
Discovery-intvl (min)    : 60             Probe-intvl (min)    : 2             
Probe-timeout (min)      : 1              Probe-retry          : 3             
Trace-timeout (sec)      : 60             Trace-retry          : 3             
Max-TTL                  : 30             Max-path             : 128           
Forwarding-class (fc)    : be             Profile              : Out           
Total Fecs               : 400            Discovered Fecs      : 400           
Last Discovery Start     : 12/19/2006 05:10:14                                 
Last Discovery End       : 12/19/2006 05:12:02                                 
Last Discovery Duration  : 00h01m48s                                           
Policy1                  : policy-1                                            
Policy2                  : policy-2 
===============================================================================
Prefix (FEC) Info
===============================================================================
Prefix              Path Last                  Probe  Discov    Discov         
                    Num  Discovered            State  State     Status         
-------------------------------------------------------------------------------
11.11.11.1/32       54   12/19/2006 05:10:15   OK     Done      OK             
11.11.11.2/32       54   12/19/2006 05:10:15   OK     Done      OK             
11.11.11.3/32       54   12/19/2006 05:10:15   OK     Done      OK 
………… 
14.14.14.95/32      72   12/19/2006 05:11:13   OK     Done      OK             
14.14.14.96/32      72   12/19/2006 05:11:13   OK     Done      OK             
14.14.14.97/32      72   12/19/2006 05:11:15   OK     Done      OK             
14.14.14.98/32      72   12/19/2006 05:11:15   OK     Done      OK             
14.14.14.99/32      72   12/19/2006 05:11:18   OK     Done      OK             
14.14.14.100/32     72   12/19/2006 05:11:20   OK     Done      OK             
===============================================================================
Legend: uP - unexplored paths, tO - trace request timed out
        mH - max hop exceeded, mP - max path exceeded
        nR - no internal resource


*A:ALA-48# show test-oam ldp-treetrace prefix 12.12.12.10/32
Discovery State  : Done                 Last Discovered  : 12/19/2006 05:11:02 
Discovery Status : ' OK '                                                    
Discovered Paths : 54                   Failed Hops      : 0                   
Probe State      : OK                   Failed Probes    : 0 


*A:ALA-48# show test-oam ldp-treetrace prefix 12.12.12.10/32  detail 
Discovery State  : Done                 Last Discovered  : 12/19/2006 05:11:02 
Discovery Status : ' OK '                                                    
Discovered Paths : 54                   Failed Hops      : 0                   
Probe State      : OK                   Failed Probes    : 0 
===============================================================================
Discovered Paths
===============================================================================
PathDest            Egr-NextHop         Remote-RtrAddr      Discovery-time     
  DiscoveryTtl        ProbeState          ProbeTmOutCnt       RtnCode          
-------------------------------------------------------------------------------
127.1.0.5           10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.9           10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.15          10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.19          10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.24          10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.28          10.10.1.2           12.12.12.10         12/19/2006 05:11:01

……………..

127.1.0.252         10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
127.1.0.255         10.10.1.2           12.12.12.10         12/19/2006 05:11:01
              7     OK                  0                   EgressRtr          
===============================================================================
*A:ALA-48#

*A:ALA-48# show test-oam twamp server
==============================================================================
TWAMP Server (port 862)
==============================================================================
Admin State : Up                               Oper State  : Up
Up Time     : 0d 00:00:05                      
Curr Conn   : 1                                Max Conn    : 32
ConnTimeout : 1800                             Conn Reject : 2
Curr Sess   : 2                                Max Sess    : 32
Tests Done  : 5                                Tests Rej   : 0
Tests Abort : 0
TstPktsRx   : 999                              TstPktsTx   : 999
==============================================================================
Prefix      : 10.0.0.0/8
Description : NMS-West
==============================================================================
Admin State : Up                               Oper State  : Up
Curr Conn   : 1                                Max Conn    : 32
Conn Reject : 0
Curr Sess   : 2                                Max Sess    : 32
Tests Done  : 5                                Tests Rej   : 0
Tests Abort : 0
TstPktsRx   : 999                              TstPktsTx   : 999
------------------------------------------------------------------------------
Client          Sessions               Idle     TstPktsRx    TstPktsTx
                Curr/Done/Rej/Abort
------------------------------------------------------------------------------
10.1.1.1        2/5/0/0                920      999          999
==============================================================================
==============================================================================
Prefix      : 10.0.0.0/16
Description : NMS-West-Special
==============================================================================
Admin State : Up                               Oper State  : Up
Curr Conn   : 0                                Max Conn    : 32
Conn Reject : 0
Curr Sess   : 0                                Max Sess    : 32
Tests Done  : 0                                Tests Rej   : 0
Tests Abort : 0
TstPktsRx   : 0                                TstPktsTx   : 0
------------------------------------------------------------------------------
Client          Sessions               Idle     TstPktsRx    TstPktsTx
                Curr/Done/Rej/Abort
------------------------------------------------------------------------------
==============================================================================

learned-remote-mac

Syntax

learned-remote-mac [domain md-index] [association ma-index] [mep mep-id] [remote-mepid mep-id]

Context

[Tree] (show>eth-cfm learned-remote-mac)

Full Context

show eth-cfm learned-remote-mac

Description

This command displays the local MEP and remote MEP MAC address information relationship. The MAC address information in this table is populated and used in place of the remote mep-id in various ETH-CFM tests that opt to use the remote-mepid mep-id configuration instead of specifying the remote peer MAC address. This table is maintained by the ETH-CC process. If a CCM has not been received for a remote peer, there is no entry in the learned-remote-mac table. However, once a CCM is received for an expected peer, an entry in the learned-remote-mac table is populated and maintained. This entry remains until the remote peer statement is deleted from the association, the local MEP is deleted, or if a manual clear>eth-cfm>learned-remote-mac command has been executed for the specified local MEP.

The optional parameters are treated as independent filters that are combined to refine the output. Omitting all optional parameters produces output that includes the entire table.

Parameters

md-index

Specifies the MD index.

Values: 1 to 4294967295

ma-index

Specifies the MA index.

Values: 1 to 4294967295

mep mep-id

Specifies the local mep-id.

Values: 1 to 8191

remote-mepid mep-id

Specifies the remote mep-id.

Values: 1 to 8191

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following is an example of learned remote MAC information. Learned Remote MAC Field Descriptions describes the learned remote MAC fields.

Sample Output

show eth-cfm learned-remote-mac
=======================================================================
Eth-CFM Learned Remote MEPID MAC Address
=======================================================================
MdIndex    MaIndex    L-MepId R-MepId Learned Remote MAC Stale Updated
-----------------------------------------------------------------------
12         1          28      29      00:00:00:00:00:29  False False
13         1000       28      29      00:00:00:00:00:29  False False
13         1000       28      31      00:00:00:00:00:31  False False
13         1500       28      29      00:00:00:00:00:29  False False
13         2000       28      29      00:00:00:00:00:29  False False
13         2000       28      31      00:00:00:00:00:31  False False
13         2000       28      32      00:00:00:00:00:32  False False
13         2002       28      29      00:00:00:00:00:29  False False
13         3000       28      29      00:00:00:00:00:29  False False
13         3000       28      31      00:00:00:00:00:31  False False
14         100        28      29      00:00:00:00:00:29  False False
14         100        28      31      00:00:00:00:00:31  False False
14         100        28      32      00:00:00:00:00:32  False False
=======================================================================

Table 15. Learned Remote MAC Field Descriptions
Label	Description
MdIndex	The local MEP domain index
MaIndex	The local MEP association index
L-MepId	The local MEP identifier
R-MepId	The remote MEP identifier
Learned Remote MAC	The learned MAC address of the remote peer
Stale	Results of the comparison between the CCM database and the learned-remote-mac table False — match True — mismatch
Updated	Whether the learned MAC in this table has been updated in the last CCM interval

learned-remote-mac

Syntax

learned-remote-mac [mep mep-id [remote-mepid mep-id]] domain md-index association ma-index

Context

[Tree] (clear>eth-cfm learned-remote-mac)

Full Context

clear eth-cfm learned-remote-mac

Description

This command clears the stored MAC addresses in the CFM learned-remote-mac address table. A valid MAC address must exist in the learned-remote-mac table for a successful PDU generation when that test uses the remote-mepid mep-id option in place of a mac-address.

The local domain and association parameters must be included as part of the clear command. The mep and remote-mepid parameters are optional. The clear command clears all matching entries based on the configured parameters. The table is populated based on the reception and processing of ETH-CC PDUs.

Parameters

mep mep-id

Specifies the local MEP ID.

Values: 1 to 8191

remote-mepid mep-id

Specifies the remote MEP ID.

Values: 1 to 8191

md-index

Specifies the MD index.

Values: 1 to 4294967295

ma-index

Specifies the MA index.

Values: 1 to 4294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lease-state

Syntax

lease-state [wholesaler service-id] [sap sap-id | sdp sdp-id:vc-id | interface interface-name | ip-address ip-address [/mask] | chaddr ieee-address | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [session { none | ipoe}] [detail]

Context

[Tree] (show>service>id>dhcp lease-state)

Full Context

show service id dhcp lease-state

Description

This command displays DHCP lease state related information.

Parameters

service-id

Specifies the service ID of the wholesaler.

Values: 1 to 2148278316, svc-name: up to 64 characters

sap-id: Specifies the physical port identifier portion of the SAP definition.

sdp-id

The SDP identifier.

Values: 1 to 17407

vc-id

The virtual circuit ID on the SDP ID for which to display information.

Values: 1 to 4294967295

interface-name: Displays information for the specified IP interface.

ip-address[/mask]: Displays information associated with the specified IP address.

ieee-address

Specifies the source MAC address.

Values: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeros)

port-id: Specifies the port ID.

no-inter-dest-id: Displays the information about no intermediate destination ID.

inter-dest-id: Displays information about the specified intermediate destination ID, up to 64 characters.

session

Shows DHCPv4 lease states for hosts that are associated with an IPoEsession or for hosts that are not associated with an IPoE session.

Values: none, ipoe

detail: Displays detailed information.

Platforms

All

Output

The following is a sample output of the DHCP lease-state command.

Sample Output

A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
10.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 


#  show service id 1000 dhcp lease-state detail
===============================================================================
DHCP lease states for service 1000
===============================================================================
Service ID           : 1000
IP Address           : 10.250.21.2
Client HW Address    : 00:02:01:00:00:01
Subscriber-interface : sub-int-2
Group-interface      : group-int-2-3
SAP                  : [1/1/2:2513.20]
Termination Type     : local
Up Time              : 0d 00:04:51
Remaining Lease Time : 0d 00:05:09
Remaining SessionTime: N/A
Persistence Key      : 0x00000000
Sub-Ident            : "sub-02-01"
Sub-Profile-String   : "sub-profile-1"
SLA-Profile-String   : "sla-profile-1"
App-Profile-String   : ""
Lease ANCP-String    : ""
Lease Int Dest Id    : ""
Category-Map-Name    : ""
Lease Info origin    : DHCP
Ip-Netmask           : 255.255.255.0
Broadcast-Ip-Addr    : N/A
Default-Router       : 10.250.21.254
Primary-Dns          : N/A
Secondary-Dns        : N/A
Primary-Nbns         : N/A
Secondary-Nbns       : N/A
ServerLeaseStart     : 10/07/2020 15:00:19
ServerLastRenew      : 10/07/2020 15:00:19
ServerLeaseEnd       : 10/07/2020 15:10:19
Session-Timeout      : N/A
IPoE|PPP session     : IPoE
Lease-Time           : 0d 00:10:00
DHCP Server Addr     : 192.0.2.2
Relay Agent Information
  Circuit Id         : pe2|1000|group-int-2-3|1/1/2:2513.20
Radius Class 1       : This is a Class attribute
Radius User-Name     : "00:02:01:00:00:01"
-------------------------------------------------------------------------------
Overrides
-------------------------------------------------------------------------------
Dir Type           Id         PIR        CIR        CBS        MBS        WRR
    Class-Weight
-------------------------------------------------------------------------------
Egr Queue          1          1234       N/A        350000     350000     N/A
    N/A
-------------------------------------------------------------------------------
No. of Overrides: 1
-------------------------------------------------------------------------------
SLA Profile Instance Session Limit Overrides
ipoe                : 2
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================

Service DHCP Lease-state Field Descriptions describes service DHCP lease-state information.

Table 16. Service DHCP Lease-state Field Descriptions
Field	Description
Service ID	The service ID
IP Address	The IP address
Client HW Address	The client hardware address
Subscriber-interface	The subscriber interface name
Group-interface	The group interface name
SAP	The SAP
Termination Type	The termination type
Up Time	The up time
Remaining Lease Time	The remaining lease time
Remaining SessionTime	The remaining session time
Persistence Key	The persistence key
Sub-Ident	The name of the subscriber identification policy
Sub-Profile-String	The subscriber profile string
SLA-Profile-String	The name of the SLA profile
App-Profile-String	The application profile string
Lease ANCP-String	The lease ANCP string
Lease Int Dest Id	The lease internal destination ID
Category-Map-Name	The category map name
Lease Info origin	The origin of the lease
Ip-Netmask	The IP netmask address
Broadcast-Ip-Addr	The broadcast IP address
Default-Router	The default router
Primary-Dns	The primary DNS address
Secondary-Dns	The secondary DNS address
Primary-Nbns	The primary NBNS
Secondary-Nbns	The secondary NBNS
ServerLeaseStart	The date and time of the start of the server lease
ServerLastRenew	The date and time of the renewal of the server lease
ServerLeaseEnd	The date and time of the end of the server lease
Session-Timeout	The session timeout value
IPoE\|PPP session	The type of session
Lease-Time	The lease time
DHCP Server Addr	The DHCP server IP address
Relay Agent Information
Circuit Id	The circuit ID
Radius Class 1	The RADIUS Class 1 value
Radius User-Name	The RADIUS user name
Overrides: (only shown when overrides are active)
Dir Type	The direction type
Id	The ID
PIR	The PIR value
CIR	The CIR value
CBS	The CBS value
MBS	The MBS value
WRR	The WRR value
Class-Weight	The class weight
No. of Overrides	The total number of overrides
Subscriber Host Limit Overrides and SLA Profile Instance Host Limit Overrides: (only shown when overrides are active)
ipv4-arp	The total number of IPv4 ARP hosts limit
ipv4-dhcp	The total number of IPv4 DHCP hosts limit
ipv4-ppp	The total number of IPv4 PPP hosts limit
ipv4-overall	The total number of IPv4 hosts limit
ipv6-pd-ipoe-dhcp	The total number of IPv6 IPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-ppp-dhcp	The total number of IPv6 PPPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-overall	The total number of IPv6 DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-wan-ipoe-dhcp	The total number of IPv6 IPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ipoe-slaac	The total number of IPv6 IPoE SLAAC WAN hosts limit
ipv6-wan-ppp-dhcp	The total number of IPv6 PPPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ppp-slaac	The total number of IPv6 IPoE SLAAC WAN hosts limit
ipv6-wan-overall	The total number of IPv6 WAN hosts limit
ipv6-overall	The total number of IPv6 hosts limit
lac-overall	The total number of L2TP LAC hosts limit
overall	The total number of subscriber hosts limit
Subscriber Session Limit Overrides and SLA Profile Instance Session Limit Overrides: (only shown when overrides are active)
ipoe	The total number of IPoE sessions limit
ppoe-local	The total number of PPPoE local terminated sessions (PTA) limit
ppoe-lac	The total number of PPPoE L2TP LAC sessions limit
ppoe-overall	The total number of PPPoE sessions limit
l2tp-lns	The total number of L2TP LNS sessions limit
l2tp-lts	The total number of L2TP LTS sessions limit
l2tp-overall	The total number of L2TP sessions limit
overall	The total number of subscriber sessions limit
Number of lease states	The total number of lease states

Routed CO Output Example

A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
10.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 


A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 10.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : ies-13-10.13.1.1                                        
Group-interface      : intf-13                                                 
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 10.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 10.13.254.254                                           
Secondary-Dns        : 10.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:48:23                                     
ServerLastRenew      : 12/24/2006 23:48:23                                     
ServerLeaseEnd       : 12/24/2006 23:49:23                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|intf-13|0|13
  Remote Id          : stringtest

-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#

Wholesaler/Retailer Output Example

A:ALA-_Dut-A# show service id 2000 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 2000
-------------------------------------------------------------------------------
Wholesaler 1000 Leases
-------------------------------------------------------------------------------
Service ID           : 1000                                                    
IP Address           : 10.13.1.254
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : whole-sub                                               
Group-interface      : intf-13                                                 
Retailer             : 2000                                                    
Retailer If          : retail-sub                                              
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h09m59s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Retail DHCP                                             
Strings origin       : Retail DHCP                                             
Lease Info origin    : Retail DHCP                                             
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 10.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : N/A                                                     
Secondary-Dns        : N/A                                                     
 
ServerLeaseStart     : 12/25/2006 00:29:41                                     
ServerLastRenew      : 12/25/2006 00:29:41                                     
ServerLeaseEnd       : 12/25/2006 00:39:41                                     
Session-Timeout      : 0d 00:10:00                                             
DHCP Server Addr     : 10.232.237.2                                            
 
Persistent Relay Agent Information
  Circuit Id         : 1/1/1:13
  Remote Id          : stringtest

Subscriber Host Limit Overrides
 ipv4-arp            : 1
 ipv4-dhcp           : 1
 ipv4-ppp            : 1
 ipv4-overall        : 1
 ipv6-pd-ipoe-dhcp   : 1
 ipv6-pd-ppp-dhcp    : 1
 ipv6-pd-overall     : 1
 ipv6-wan-ipoe-dhcp  : 1
 ipv6-wan-ipoe-slaac : 1
 ipv6-wan-ppp-dhcp   : 1
 ipv6-wan-ppp-slaac  : 1
 ipv6-wan-overall    : 1
 ipv6-overall        : 1
 lac-overall         : 1
 overall             : 1
SLA Profile Instance Host Limit Overrides
 ipv4-arp            : 1
 ipv4-dhcp           : 1
 ipv4-ppp            : 1
 ipv4-overall        : 1
 ipv6-pd-ipoe-dhcp   : 1
 ipv6-pd-ppp-dhcp    : 1
 ipv6-pd-overall     : 1
 ipv6-wan-ipoe-dhcp  : 1
 ipv6-wan-ipoe-slaac : 1
 ipv6-wan-ppp-dhcp   : 1
 ipv6-wan-ppp-slaac  : 1
 ipv6-wan-overall    : 1
 ipv6-overall        : 1
 lac-overall         : 1
 overall             : 1
Subscriber Session Limit Overrides
 ipoe                : 1
 pppoe-local         : 1
 pppoe-lac           : 1
 pppoe-overall       : 1
 l2tp-lns            : 1
 l2tp-lts            : 1
 l2tp-overall        : 1
 overall             : 1
SLA Profile Instance Session Limit Overrides
 ipoe                : 1
 pppoe-local         : 1
 pppoe-lac           : 1
 pppoe-overall       : 1
 l2tp-lns            : 1
 l2tp-lts            : 1
 l2tp-overall        : 1
 overall             : 1
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#

lease-state

Syntax

lease-state [detail] [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

lease-state [detail] interface interface-name [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

lease-state [detail] ipv6-address ipv6-prefix[/prefix-length] [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

lease-state [detail] mac ieee-address [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

Context

[Tree] (show>service>id>dhcp6 lease-state)

Full Context

show service id dhcp6 lease-state

Description

This command displays DHCPv6 lease state information.

Note:

The wholesaler service-id parameter is applicable only in the VPRN context.

Parameters

detail: Displays detailed lease state information.

service-id

The service ID of the wholesaler. When specified in this context, SAP, SDP, interface, IP address and MAC parameters are ignored. This parameter only applies to the 7750 SR.

Values: service-id: 1 to 2147483647

session

Shows DHCPv6 lease states for clients that are associated with an IPoE session or for clients that are associated with a PPP session or for clients that are not associated with an IPoE session.

Values: none, ipoe, ppp

policy-name: Specifies the name of the router advertisement policy.

interface-name: Specifies the interface name, up to 32 characters.

ipv6-address[/mask]: Shows information for the specified IPv6 address and mask.

ieee-address: Shows information for the specified 48-bit MAC address, expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff, where aa, bb, cc, dd, ee and ff are hexadecimal numbers.

Platforms

All

Output

The following output is an example of DHCP6 lease state information.

Sample Output

*A:eng-BNG-2# show  service id 1000 dhcp6 lease-state detail
===============================================================================
DHCP lease states for service 1000
===============================================================================
Service ID           : 1000
IP Address           : 2001:1000:0:4::1/128
Client HW Address    : 00:00:10:10:12:12
Subscriber-interface : sub-int-01
Group-interface      : grp-int-01
SAP                  : 1/1/20:841
Termination Type     : local
Up Time              : 0d 00:00:13
Remaining Lease Time : 0d 23:59:47 (Lease Split)
Remaining SessionTime: N/A
Persistence Key      : N/A
Sub-Ident            : "host-1"
Sub-Profile-String   : "no-prof"
SLA-Profile-String   : "no-prof"
App-Profile-String   : ""
Lease ANCP-String    : ""
Lease Int Dest Id    : ""
Category-Map-Name    : ""
Dhcp6 ClientId (DUID): 00030001000010101212
Dhcp6 IAID           : 0
Dhcp6 IAID Type      : non-temporary
Dhcp6 Client Ip      : fe80:db8:200:10ff:fe10:1212
Primary-Dns          : N/A
Secondary-Dns        : N/A
Pool Name            : ""
Dhcp6 Server Addr    : ::10
Dhcp6 ServerId (DUID): 00030001d854ff000000
Dhcp6 InterfaceId    : test
Dhcp6 RemoteId       : N/A
Radius sub-if prefix : N/A
Router adv. policy   : ra-policy-01
Lease Info origin    : DHCP
ServerLeaseStart     : 02/13/2017 22:04:24
ServerLastRenew      : 02/13/2017 22:04:24
ServerLeaseEnd       : 02/14/2017 22:04:24
Session-Timeout      : N/A
IPoE|PPP session     : No
Radius User-Name     : "00:00:10:10:12:12"

-------------------------------------------------------------------------------
Overrides
-------------------------------------------------------------------------------
Dir Type           Id         PIR        CIR        CBS        MBS        WRR
    Class-Weight
-------------------------------------------------------------------------------
Egr Queue          1          1234       N/A        350000     350000     N/A
    N/A
-------------------------------------------------------------------------------
No. of Overrides: 1
-------------------------------------------------------------------------------
SLA Profile Instance Session Limit Overrides
ipoe                : 2
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================

*A:Dut-A#show service id 13 dhcp6 lease-state router-advertisement-policy ra-policy-01
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC
                                                     LeaseTime  Origin   Stdby
-------------------------------------------------------------------------------
2013:bad:beaf::1/128
                00:00:00:00:00:13 1/1/1:13            23h47m34s  DHCP      
2013:bad:beaf::2/128
                00:00:00:00:00:14 1/1/1:13            23h52m36s  DHCP      
2013:bad:beaf::3/128
                00:00:00:00:00:15 1/1/1:13            23h54m17s  DHCP      
-------------------------------------------------------------------------------
Number of lease states : 3
===============================================================================
*A:Dut-A#

DHCPv6 Lease State Router Advertisement Field Descriptions describes DHCPv6 lease state router advertisement policy output fields.

Table 17. DHCPv6 Lease State Router Advertisement Field Descriptions
Field	Description
Service ID	The service ID provided by the access node to which this subnet is bound
IP Address	The IP address of the service
Client HW Address	The MAC address of the client
Subscriber-Interface	The subscriber interface for the service
Group-interface	The group interface for the service
Sap/Sdp ID	The service SAP and SDP IDs
Termination Type	The PPP session type
Up Time	The value of the up time at the time of the last modification of an entry
Remaining Lease Time	The time left before the DHCPv6 lease expires. The client should renew its lease before this timer expires. (Lease Split) indicates that DHCPv6 lease split is active.
Remaining SessionTime	The time left for this session
Persistence Key	The persistence key
Sub-Ident	The subscriber identification policy name
Sub-Profile-String	The subscriber profile policy name
App-Profile-String	The application profile policy name
Lease ANCP-String	The ANCP string
Category-Map-Name	The category map name
Dhcp6 ClientID (DUID)	The DHCP client ID
Dhcp6 IAID	The DHCPv6 Identity Association Identifier (IAID) assigned by the client
Dhcp6 IAID Type	The DHCPv6 Identity Association type of this lease (non-temporary or prefix)
Dhcp6 Client Ip	The DHCPv6 IP address of the client
Primary-Dns	The primary DNS, if configured
Secondary-Dns	The secondary DNS, if configured
Pool Name	The pool name
Dhcp6 Server Addr	The DHCPv6 server address
Dhcp6 ServerID (DUID)	The DHCPv6 server ID
Dhcp6 InterfaceId	The DHCPv6 interface ID
Dhcp6 RemoteId	The DHCPv6 remote ID
Radius sub-if prefix	The RADIUS subscriber interface prefix
Router adv. policy	The router advertisement policy
Lease Info origin	The lease info origin
ServerLeaseStart	The date and time the lease was created
ServerLastRenew	The last renew was done for this lease
ServerLeaseEnd	The time left for this lease
Session-Timeout	The session timeout interval
IPoE\|PPP	IPoE or PPP
Radius User-Name	The RADIUS user name
Overrides: (only shown when overrides are active)
Dir Type	The direction type
Id	The ID
PIR	The PIR value
CIR	The CIR value
CBS	The CBS value
MBS	The MBS value
WRR	The WRR value
Class-Weight	The class weight
No. of Overrides	The total number of overrides
Subscriber Host Limit Overrides and SLA Profile Instance Host Limit Overrides: (only shown when overrides are active)
ipv4-arp	The total number of IPv4 ARP hosts limit
ipv4-dhcp	The total number of IPv4 DHCP hosts limit
ipv4-ppp	The total number of IPv4 PPP hosts limit
ipv4-overall	The total number of IPv4 hosts limit
ipv6-pd-ipoe-dhcp	The total number of IPv6 IPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-ppp-dhcp	The total number of IPv6 PPPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-overall	The total number of IPv6 DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-wan-ipoe-dhcp	The total number of IPv6 IPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ipoe-slaac	The total number of IPv6 IPoE SLAAC WAN hosts limit
ipv6-wan-ppp-dhcp	The total number of IPv6 PPPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ppp-slaac	The total number of IPv6 PPPoE SLAAC WAN hosts limit
ipv6-wan-overall	The total number of IPv6 WAN hosts limit
ipv6-overall	The total number of IPv6 hosts limit
lac-overall	The total number of L2TP LAC hosts limit
overall	The total number of subscriber hosts limit
Subscriber Session Limit Overrides and SLA Profile Instance Session Limit Overrides: (only shown when overrides are active)
ipoe	The total number of IPoE sessions limit
ppoe-local	The total number of PPPoE local terminated sessions (PTA) limit
ppoe-lac	The total number of PPPoE L2TP LAC sessions limit
ppoe-overall	The total number of PPPoE sessions limit
l2tp-lns	The total number of L2TP LNS sessions limit
l2tp-lts	The total number of L2TP LTS sessions limit
l2tp-overall	The total number of L2TP sessions limit
overall	The total number of subscriber sessions limit
Number of lease states	The total number of lease states

lease-state

Syntax

lease-state all [no-dhcp-release]

lease-state [port port-id] inter-dest-id intermediate-destination-id [no-dhcp-release]

lease-state [port port-id] no-inter-dest-id [no-dhcp-release]

lease-state ip-address ip-address [/mask] [no-dhcp-release]

lease-state macieee-address [no-dhcp-release]

lease-state port port-id [no-dhcp-release]

lease-state sap sap-id [no-dhcp-release]

lease-state sdp sdp-id:vc-id [no-dhcp-release]

Context

[Tree] (clear>service>id>dhcp lease-state)

Full Context

clear service id dhcp lease-state

Description

This command removes the DHCPv4 lease state information from the system and sends a DHCP release message on behalf of the client to the DHCP server. A DHCP release is not sent when the remaining lease-time is less than 5 minutes or when the no-dhcp-release parameter is specified.

Parameters

all: Clears all lease state statistics.

port-id: Displays information about the specified port ID.

intermediate-destination-id: Displays information about the specified intermediate destination ID, up to 32 characters.

no-inter-dest-id: Displays the information about no intermediate destination ID.

ip-address[/mask]

The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that is used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

Values

a.b.c.d.

mask: 1 to 32

ieee-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

Values: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

sap-id: Specifies the physical port identifier portion of the SAP definition.

sdp-id

The SDP ID to be cleared.

Values: 1 to 17407

vc-id

The virtual circuit ID on the SDP ID to be cleared.

Values: 1 to 4294967295

no-dhcp-release: Specifies that the node clears the state without sending the DHCP release message.

Platforms

All

lease-state

Syntax

lease-state all [no-dhcp-release]

lease-state ipv6-address ipv6-prefix[/prefix-length] [ no-dhcp-release]

lease-state mac ieee-address [no-dhcp-release]

lease-state sap sap-id [no-dhcp-release]

Context

[Tree] (clear>service>id>dhcp6 lease-state)

Full Context

clear service id dhcp6 lease-state

Description

This command removes the DHCPv6 lease state information from the system and sends a DHCP release message on behalf of the client to the DHCP server. A DHCP release is not sent when the remaining lease-time is less than 5 minutes or when the no-dhcp-release parameter is specified.

Parameters

all: Clears all lease-states.

no-dhcp-release: Specifies that the node clears the state without sending the DHCP release message.

ipv6-prefix[/prefix-length]

Clears routes only matching the specified IP address and length and only applies to the 7750 SR.

Values


ipv6	ipv6-prefix[/pref*:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
		x:x:x:x:x:x:d.d.d.d
		x: [0 to FFFF]H
		d: [0 to 255]D
	prefix-length:	1 to 128

ieee-address: Clears DHCP6 MAC address lease state information. The 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

sap-id: Clears the specified lease state SAP information.

Platforms

All

leases

Syntax

leases [detail]

leases ip-address[/mask] address-from-user-db [detail]

leases ip-address[/mask] dhcp-host dhcp-host-name [detail]

leases ip-address[/mask] ppp-host ppp-host-name [detail]

leases ip-address[/mask] [detail]

Context

[Tree] (show>router>dhcp>local-dhcp-server leases)

Full Context

show router dhcp local-dhcp-server leases

Description

This command displays the DHCP leases.

Parameters

ip-address: Specifies the base IP address of the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

mask

The subnet mask in dotted decimal notation.

Values: 0 to 32

address-from-user-db: Displays only leases that have IP addresses from the local-user-db.

dhcp-host-name: Shows the leases that match a certain DHCP host from the local-user-db.

ppp-host-name: Displays the leases that match a certain PPPoE host from the local-user-db.

detail

Displays detailed information of all leases that fall into the indicated subnet.

The command with no parameters shows all leases from the local-user-db.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of lease information

Sample Output

*A:ALA-48>show>router>dhcp>local-dhcp-server# leases ip-address 10.0.0.4
===============================================================================
Leases for DHCP server test router Base
===============================================================================
IP Address      Lease State       Mac Address       Remaining Clnt  
  PPPoE user name/Opt82 Circuit Id                  LifeTime  Type  
-------------------------------------------------------------------------------
No leases found
*A:ALA-48>show>router>dhcp>local-dhcp-server#

Leases Field Descriptions describes leases output fields.

Table 18. Leases Field Descriptions
Field	Description
IP Address	The IP address for the specified lease
Lease State	The lease state of the IP address
Mac Address	The MAC address of the lease
Remaining Lifetime	The remaining lifetime of the lease
Clnt Type	The address type
PPPoE user name	The PPPoE user name
Opt82	The option number that the DHCP server uses to send the identification strings to the PPPoE client
Circuit ID	The circuit ID from Option 82

leases

Syntax

leases [ipv6-address/prefix-length] [type] [state] [detail]

Context

[Tree] (show>router>dhcp6>local-dhcp-server leases)

Full Context

show router dhcp6 local-dhcp-server leases

Description

This command displays the DHCP6 leases.

Parameters

ipv6-address: Specifies the base IP address of the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

mask

The subnet mask in dotted decimal notation.

Values: 0 to 32

type

Displays the lease type.

Values: pd, wan-host

state

Displays the state of the lease.

Values: advertised, remove-pending, held

detail

Displays detailed information of all leases that fall into the indicated subnet.

The command with no parameters shows all leases from the local user database.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of lease information.

Sample Output

show router 600 dhcp6 local-dhcp-server "d6" leases
===============================================================================
Leases for DHCPv6 server d6
===============================================================================
IP Address/Prefix                          Lease State       Remaining   Fail
  Link-local Address                                         LifeTime    Ctrl
-------------------------------------------------------------------------------
2001:AAAA::1/128
  FE80::220:FCFF:FE1E:CD52                 stable            23h58m52s   local
-------------------------------------------------------------------------------
1 leases found
===============================================================================

DHCP6 Lease Field Descriptions describes DHCP6 lease fields.

Table 19. DHCP6 Lease Field Descriptions
Field	Description
IP Address/Prefix	The IP address and prefix of the lease
Link-local Address	The link local address of the lease
Lease State	The lease state of the lease
Remaining Lifetime	The remaining lifetime of the lease
Fail Ctrl	The type of failover control
No. leases found	The total number of leases

leases

Syntax

leases ip-address[/mask] [state]

leases all [state]

Context

[Tree] (clear>router>dhcp>server leases)

Full Context

clear router dhcp local-dhcp-server leases

Description

This command clears DHCP leases.

Parameters

ip-address[/mask]: Clears the specified IP address and mask.

state

Clears the state of the lease to be removed.

Values: offered, stable, force-renew-pending, remove-pending, held, internal, internal-orphan, internal-held, sticky

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

leases

Syntax

leases [ipv6-address/prefix-length] [type] [state]

leases all [type] [state]

Context

[Tree] (clear>router>dhcp6>server leases)

Full Context

clear router dhcp6 local-dhcp-server leases

Description

This command removes the specified leases in the specified local DHCPv6 server.

Parameters

ipv6-address/prefix-length: Specifies the prefix of the leases to be removed.

type

Specifies the type of the lease to be removed.

Values: pd, slaac, wan-host

state

Specifies the state of the lease to be removed.

Values: advertised, remove-pending, held, internal, internal-orphan, internal-offered

all: Removes all leases of specified type or state.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

lfa-coverage

Syntax

lfa-coverage

Context

[Tree] (show>router>isis lfa-coverage)

Full Context

show router isis lfa-coverage

Description

This command displays IS-IS LFA coverage information. This information corresponds to the backup next hops for prefixes and nodes written in RTM by the base LFA feature.

Platforms

All

Output

The following output is an example of LFA coverage information.

Sample Output

*A:SR# show router isis lfa-coverage 
============================================================================
Rtr Base ISIS Instance 0 LFA Coverage
============================================================================
Topology     Level    Node    IPv4 
----------------------------------------------------------------------------
IPV4 Unicast  L1    4/4(100%) 826/826(100%) 
IPV4 Unicast  L2    2/2(100%) 826/826(100%) 
IPV6 Unicast  L1    3/3(100%) 0/0(0%) 
IPV6 Unicast  L2    0/0(0%)   0/0(0%) 
============================================================================
*A:SR#

*A:SRR>config>router>isis# show router isis lfa-coverage 
===============================================================================
LFA Coverage
===============================================================================
Topology         Level   Node           IPv4                IPv6
-------------------------------------------------------------------------------
IPV4 Unicast     L1      3/4(75%)       1484/1975(75%)      0/0(0%)
IPV4 Unicast     L2      3/3(100%)      1484/1975(75%)      0/0(0%)
===============================================================================
*A:SRR>config>router>isis#

lfa-coverage

Syntax

lfa-coverage

Context

[Tree] (show>router>ospf3 lfa-coverage)

[Tree] (show>router>ospf lfa-coverage)

Full Context

show router ospf3 lfa-coverage

show router ospf lfa-coverage

Description

This command displays OSPFv2 or OSPFv3 Loop-Free Alternate (LFA) next-hop information. This information corresponds to the backup next hops for prefixes and nodes written in RTM by the base LFA feature.

Platforms

All

Output

Sample Output

*A:Dut-A# show router ospf 1 lfa-coverage
=======================================================================
Rtr Base OSPFv2 Instance 1 LFA Coverage
=======================================================================
Area                     Node                     Prefix
---------------------------------------------------------------------------
0.0.0.0                  4/4(100%)                8/8(100%)
=======================================================================
*A:Dut-A#

*A:Dut-C>config>router>ospf3# show router ospf3 0 lfa-coverage    
===========================================================================
Rtr Base OSPFv3 Instance 0 LFA Coverage  
===========================================================================
Area                     Node                     Prefix
---------------------------------------------------------------------------
0.0.0.1                  1/3(33%)                 9/27(33%)
===========================================================================

li

Syntax

li

Context

[Tree] (show li)

Full Context

show li

Description

This command displays Lawful Intercept (LI) information.

Platforms

All

li

Syntax

li

Context

[Tree] (clear li)

Full Context

clear li

Description

This command clears Lawful Intercept (LI) information.

Platforms

All

li-ip

Syntax

li-ip [li-filter-name]

li-ip li-filter-name {counters | associations}

li-ip li-filter-name entry entry-id [counters]

Context

[Tree] (show>li>filter li-ip)

Full Context

show li filter li-ip

Description

This command displays LI mirror IPv4 address filter configuration and operation information.

Parameters

li-filter-name: Specifies the LI filter name, up to 32 characters.

entry-id

Specifies the LI filter entry.

Values: 1 to 65535

counters: Specifies LI filter counter information.

associations: Specifies LI filter association information.

Platforms

All

li-ip

Syntax

li-ip li-filter-name[entry entry-id] [{ ingress | egress}]

Context

[Tree] (clear>li>filter li-ip)

Full Context

clear li filter li-ip

Description

This command clears LI mirror IPv4 address filter configuration and operation information.

Parameters

li-filter-name: Clears the LI filter name, up to 32 characters.

entry-id

Clears the LI filter entry.

Values: 1 to 65535

Platforms

All

li-ipv6

Syntax

li-ipv6 [li-filter-name]

li-ipv6 li-filter-name {counters | associations}

li-ipv6 li-filter-name entry entry-id [counters]

Context

[Tree] (show>li>filter li-ipv6)

Full Context

show li filter li-ipv6

Description

This command displays LI mirror IPv6 address filter configuration and operation information.

Parameters

li-filter-name: Specifies the LI filter name, up to 32 characters.

entry-id

Specifies the LI filter entry.

Values: 1 to 65535

counters: Specifies LI filter counter information.

associations: Specifies LI filter association information.

Platforms

All

li-ipv6

Syntax

li-ipv6 li-filter-name[entry entry-id] [{ ingress | egress}]

Context

[Tree] (clear>li>filter li-ipv6)

Full Context

clear li filter li-ipv6

Description

This command clears LI mirror IPv6 address filter configuration and operation information.

Parameters

li-filter-name: Clears the LI filter name, up to 32 characters.

entry-id

Clears the LI filter entry.

Values: 1 to 65535

Platforms

All

li-mac

Syntax

li-mac [li-filter-name]

li-mac li-filter-name {counters | associations}

li-mac li-filter-name entry entry-id [counters]

Context

[Tree] (show>li>filter li-mac)

Full Context

show li filter li-mac

Description

This command displays LI mirror MAC address filter configuration and operation information.

Parameters

li-filter-name: Specifies the LI filter name, up to 32 characters.

entry-id

Specifies the LI filter entry.

Values: 1 to 65535

counters: Specifies LI filter counter information.

associations: Specifies LI filter association information.

Platforms

All

li-mac

Syntax

li-mac li-filter-name[entry entry-id] [{ ingress | egress}]

Context

[Tree] (clear>li>filter li-mac)

Full Context

clear li filter li-mac

Description

This command clears LI mirror MAC address filter configuration and operation information.

Parameters

li-filter-name: Clears the LI filter name, up to 32 characters.

entry-id

Clears the LI filter entry.

Values: 1 to 65535

Platforms

All

li-source

Syntax

li-source service-id [acct-session-id session-id]

Context

[Tree] (show>li li-source)

Full Context

show li li-source

Description

This command displays LI mirror configuration and operation information.

Parameters

service-id

Specifies the service ID.

Values: 1 to 2147483647

session-id: Specifies the session ID, up to 22 characters.

Platforms

All

Output

The following output is an example of LI source information.

Sample Output

*A:sim138# show li li-source 2 
===============================================================================
Mirror Service
===============================================================================
Service Id       : 2                    Type          : Ether                  
Admin State      : Up                   Oper State    : Up                     
Forwarding Class : be                   Remote Sources: No                     
Slice            : 0                                                           
Destination SDP  : 1000 (100.1.1.2)     Egress Label  : 4000                   
Signaling:       : None                                                        
 
-------------------------------------------------------------------------------
Local Sources
-------------------------------------------------------------------------------
Admin State      : Up                                                          
 
 - IP Filter       1          Entry 1         
===============================================================================
*A:sim138#

license

Syntax

license available-licenses

Context

[Tree] (show>system license)

Full Context

show system license

Description

Displays information related to the active license(s) within the system. This includes the license name, target UUID, target product, target SR OS release, and the start, end, and issue date of the license.

If the available-licenses attribute is included, then the information for each active license shall be displayed. The usual case for more than one license in a system is during an upgrade procedures when there needs to be both the originating and destination release licenses available in the system.

Parameters

available-licenses: Includes information for all licenses active in the system.

Platforms

All

Output

The following output is an example of license information.

Sample Output

*A:ExitLeaf-35# show system license 
===============================================================================
Current License
===============================================================================
License status : monitoring, valid license record
Time remaining : 131 days 9 hours
-------------------------------------------------------------------------------
License name   : sr-regress@list.nokia.com
License uuid   : ab516e50-2413-44aa-9f7c-34b4e5b64d19
Machine uuid   : ab516e50-2413-44aa-9f7c-34b4e5b64d19
License desc   : 7xxx Platform
License prod   : 7xxx Platform
License sros   : TiMOS-[BC]-16.0.*
Current date   : FRI NOV 03 15:53:54 UTC 2017
Issue   date   : FRI SEP 22 20:55:14 UTC 2017
Start   date   : FRI SEP 15 00:00:00 UTC 2017
End     date   : THU MAR 15 00:00:00 UTC 2018
-------------------------------------------------------------------------------
                                                                    Entitlement
IOM Upgrades   : !cr-er                                                       1
               : !er-he                                                       1
               : !cr400g-cr1200g+                                             1
               : !er400g-er1200g+                                             1
               : !he400g-he1200g+                                             1
               : !cr-er1200g+                                                 1
               : !er-he1200g+                                                 1
MDA Upgrades   :  cr1200g-cr1600g                                             1
               :  cr1600g-cr2400g                                             1
               :  er1200g-er1600g                                             1
               :  er1600g-er2400g                                             1
               :  he1200g-he1600g                                             1
               :  he1600g-he2400g                                             1
               :  cr1200g-er1200g                                             1
               :  er1200g-he1200g                                             1
               :  cr1600g-er1600g                                             1
               :  er1600g-he1600g                                             1
               :  cr2400g-er2400g                                             1
               :  er2400g-he2400g                                             1
               : !any2400g-2400g+                                             1
               : !cr3600g-cr4800g                                             1
               : !er3600g-er4800g                                             1
               : !he3600g-he4800g                                             1
               : !cr3600g-er3600g                                             1
               : !er3600g-he3600g                                             1
               : !cr4800g-er4800g                                             1
               : !er4800g-he4800g                                             1
               : !any3600g-3600gdd                                            1
               : !any4800g-4800g+                                             1
-------------------------------------------------------------------------------

  ! - indicates license not applicable to system

license-statistics

Syntax

license-statistics

Context

[Tree] (show>system license-statistics)

Full Context

show system license-statistics

Description

Commands in this context display application license statistics.

Platforms

VSR

licensing

Syntax

licensing port-id

licensing audit [monitored]

licensing entitlements

Context

[Tree] (show licensing)

Full Context

show licensing

Description

This command displays information related to the active application licenses on the system. The licenses are either monitored RTUs or entitlement ASLs, both of which cover features and scale in use in the SR OS system.

For monitored RTUs, there is a legal requirement to purchase the RTU parts to cover the administrative enabling of the related features and scale; however, the SR OS does not block the activation or scale of the feature.

For entitlement ASLs, feature activation on the SR OS system requires the installation of the ASL via the license-file mechanism before the related feature can be enabled. See the 7750 SR and 7950 XRS Pay-as-You-Grow Licensing Reference Guide for more information.

When the audit keyword is used, the display shows all the monitored RTUs and entitlement ASLs of the node. Using the optional monitored keyword together with audit restricts the display to only the monitored RTUs.

When the entitlements keyword is used, the display shows all the entitlements in the active licenses in the system, the type of license, the quantity of POOL licenses, and the number of each that is in use or available for use.

Parameters

audit: Specifies that the state of all features covered by licenses is displayed.

monitored: Specifies that only the monitored RTUs are included in the audit display.

entitlements: Specifies that the number of instances allowed by the active license is displayed.

port-id

Specifies the port identifier in the format slot[/mda[/connector[/port]]].


slot	1 to 10
mda	1 to 2
connector	c1 to c36
port	1 to 10

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following are examples of the show licensing command output and the corresponding tables describe the output fields:

Sample Output: show licensing

# show licensing 2/1 
===============================================================================
Connector           MAC  Licensed  Restrictions
-------------------------------------------------------------------------------
2/1/c1              1    Yes       400 Gbps per MAC Chip
2/1/c2              1    Yes       400 Gbps per MAC Chip
2/1/c3              1    Yes       400 Gbps per MAC Chip
2/1/c4              2    Yes       400 Gbps per MAC Chip
2/1/c5              2    Yes       400 Gbps per MAC Chip
2/1/c6              2    Yes       400 Gbps per MAC Chip
2/1/c7              3    Yes       400 Gbps per MAC Chip
2/1/c8              3    Yes       400 Gbps per MAC Chip
2/1/c9              3    Yes       400 Gbps per MAC Chip
2/1/c10             4    Yes       400 Gbps per MAC Chip
2/1/c11             4    Yes       400 Gbps per MAC Chip
2/1/c12             4    Yes       400 Gbps per MAC Chip
2/1/c13             5    Yes       400 Gbps per MAC Chip
2/1/c14             5    Yes       400 Gbps per MAC Chip
2/1/c15             5    Yes       400 Gbps per MAC Chip
2/1/c16             6    Yes       400 Gbps per MAC Chip
2/1/c17             6    Yes       400 Gbps per MAC Chip
2/1/c18             6    Yes       400 Gbps per MAC Chip
2/1/c19             7    Yes       400 Gbps per MAC Chip
2/1/c20             7    Yes       400 Gbps per MAC Chip
2/1/c21             7    Yes       400 Gbps per MAC Chip
2/1/c22             8    Yes       400 Gbps per MAC Chip
2/1/c23             8    Yes       400 Gbps per MAC Chip
2/1/c24             8    Yes       400 Gbps per MAC Chip
2/1/c25             9    Yes       400 Gbps per MAC Chip
2/1/c26             9    Yes       400 Gbps per MAC Chip
2/1/c27             9    Yes       400 Gbps per MAC Chip
2/1/c28             10   Yes       400 Gbps per MAC Chip
2/1/c29             10   Yes       400 Gbps per MAC Chip
2/1/c30             10   Yes       400 Gbps per MAC Chip
2/1/c31             11   Yes       400 Gbps per MAC Chip
2/1/c32             11   Yes       400 Gbps per MAC Chip
2/1/c33             11   Yes       400 Gbps per MAC Chip

Output Fields

Output Fields: Show Licensing describes the output fields for the show licensing command.

Table 20. Output Fields: Show Licensing
Label	Description
Connector	The identity of connector for the license limits.
MAC	The index of the MAC on the card or MDA to which the connector is attached.
Licensed	Whether or not the connector is licensed. Yes — the connector is included in the licensed level of the card or MDA and may be configured for a breakout. Other rules may apply as described in the restrictions field. No — this connector is not included in the licensed level of the card or MDA and it cannot be configured for breakout.
Restrictions	Additional license rules that may apply to the use of the connector, for example, bandwidth limits to the set of connectors on the same MAC.

Sample Output: show licensing audit

# show licensing audit
=======================================================================
                                   Current     Current     Previous
License                            Allocated   Max         24 Hr Max
-----------------------------------------------------------------------
IOM Upgrades
  cr-er400g+                                 0           0           0
  cr-er800g+                                 0           0           0
  er-he400g+                                 0           0           0
  er-he800g+                                 0           0           0
  cr-er1200g+                                0           0           0
  er-he1200g+                                0           0           0
  cr400g-cr800g+                             0           0           0
  er400g-er800g+                             0           0           0
  he400g-he800g+                             0           0           0
  cr400g-cr1200g+                            0           0           0
  cr800g-cr1200g+                            0           0           0
  er400g-er1200g+                            0           0           0
  er800g-er1200g+                            0           0           0
  he400g-he1200g+                            0           0           0
  he800g-he1200g+                            0           0           0
Port Licenses
  7x50 SR/XRS Port 1GE                       6           6           6
  7x50 SR/XRS Port 10GE                     12          12          12
  7x50 SR/XRS Port 25GE                      0           0           0
  7x50 SR/XRS Port 40GE                      0           0           0
  7x50 SR/XRS Port 50GE                      0           0           0
  7x50 SR/XRS Port 100GE                     4           4           4
  7x50 SR/XRS Port 400GE                     0           0           0
=======================================================================
Last 24 Hr Interval Ended: 09/24/2020 18:14:03

Output Fields

Output Fields: Show Licensing Audit describes the output fields for the show licensing audit command.

Table 21. Output Fields: Show Licensing Audit
Label	Description
License	The name of the entitlement ASL or the monitored RTU, grouped by category
Current Allocated	The number of instances of the license that are currently in use
Current Max	The maximum number of instances of the license that were recorded as in use within the current 24-hour monitoring period
Previous 24 Hr Max	The maximum number of instances of the license that were recorded in the previous full 24-hour monitoring period; shows as "n/a" if it has been less than 24 hours since startup
Last 24 Hr Interval Ended	Indicates the end time of the last 24-hour monitoring period; not displayed if it is less than 24 hours since startup

Sample Output: show licensing entitlements

# show licensing entitlements
========================================================================
License                              Available      In-Use       State
------------------------------------------------------------------------
MDA Upgrades
  cr1200g-cr1600g                            1           0        VALID
  cr1200g-er1200g                            2           0        VALID
  cr1600g-cr2400g                            1           0        VALID
  cr1600g-er1600g                            0           2        VALID
  cr2400g-er2400g                            1           0        VALID
  er1200g-er1600g                            1           0        VALID
  er1200g-he1200g                            1           0        VALID
  er1600g-er2400g                            4           0        VALID
  er1600g-he1600g                            1           0        VALID
  er2400g-he2400g                            1           0        VALID
  he1200g-he1600g                            1           0        VALID
  he1600g-he2400g                            1           0        VALID
========================================================================
*

Output Fields

Output Fields: Show Licensing entitlement describes the output fields for the show licensing entitlement command.

Table 22. Output Fields: Show Licensing entitlement
Label	Description
License	The description of the license
Available	The number of instances that are not currently being used. "License err" if in use is greater than the number of the allowed entitlements.
In-Use	The number of instances that are currently being used.
State	Indicates the state of the license as: VALID — license can be used in the node. VIOLATION — license is in use but not covered by the currently activated license key file.

link

Syntax

link

Context

[Tree] (show>router>bgp>routes>bgp-ls link)

Full Context

show router bgp routes bgp-ls link

Description

This command displays BGP-LS NLRIs for link types.

Platforms

All

link-check

Syntax

link-check

Context

[Tree] (tools>perform>chassis link-check)

Full Context

tools perform chassis link-check

Description

This command checks the connection between an XCM and XMA cards on a SR-2/7/14s chassis. The function checks the connection between all XCM and XMA cards present in the system and outputs one of the following for each XMA:

OK — the connection is good and no action is required
NOK — the connection is suspect, re-seat the XMA to determine if this corrects the issue. If this issue persists, contact Nokia support.

Platforms

7750 SR-1s, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s

link-group-member-status

Syntax

link-group-member-status name[level level]

Context

[Tree] (show>router>isis link-group-member-status)

Full Context

show router isis link-group-member-status

Description

This command displays IS-IS link-group-member status.

Parameters

name: Up to 32 characters.

level: Specifies the interface level (1, 2, or 1 and 2).

Platforms

All

Output

The following output is an example of link group member status information.

Sample Output

A:cses-V94# show router isis link-group-member-status
  - link-group-member-status <name> [level <level>]

 <name>               : [32 chars max]
 <level>              : 1|2


A:cses-V94# show router isis link-group-member-status "toDutB"

===============================================================================
Rtr Base ISIS Instance 0 Link-Group Member
===============================================================================
Link-group            I/F name                Level      State
-------------------------------------------------------------------------------
toDutB                ip-10.10.12.3           L1         Up
toDutB                ip-10.10.3.3            L1         Up
toDutB                ip-10.10.12.3           L2         Up
toDutB                ip-10.10.3.3            L2         Up
-------------------------------------------------------------------------------
Legend: BER = bitErrorRate
===============================================================================
A:cses-V94#

link-group-status

Syntax

link-group-status name [level level]

Context

[Tree] (show>router>isis link-group-status)

Full Context

show router isis link-group-status

Description

This command displays IS-IS link-group status.

Parameters

name: Specifies the link-group name.

level: Specifies the interface level (1, 2, or 1 and 2).

Platforms

All

Output

The following output is an example of link group status.

Sample Output

A:cses-V94# show router isis link-group-status

===============================================================================
Rtr Base ISIS Instance 0 Link-Group Status
===============================================================================
Link-group              Mbrs   Oper   Revert Active Level   State
                               Mbr     Mbr    Mbr
-------------------------------------------------------------------------------
toDutB                  2      2      2      2      L1      normal
toDutB                  2      2      2      2      L2      normal
toDutE                  2      2      2      2      L1      normal
toDutE                  2      2      2      2      L2      normal
===============================================================================
A:cses-V94#

link-map-profile

Syntax

link-map-profile link-map-profile

Context

[Tree] (show>lag link-map-profile)

Full Context

show lag link-map-profile

Description

This command displays LAG link map profile information.

Parameters

link-map-profile

Displays information about a specified LAG link map profile.

Values

1 to 32 (VSR)

1 to 64 (all other platforms)

Platforms

All

link-measurement

Syntax

link-measurement

Context

[Tree] (show>test-oam link-measurement)

Full Context

show test-oam link-measurement

Description

Commands in this context display link measurement template information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lldp

Syntax

lldp

lldp neighbor

Context

[Tree] (show>system lldp)

Full Context

show system lldp

Description

This command displays local Link Layer Discovery Protocol (LLDP) information at the system level. This includes an option to display summary information for all known peers.

Parameters

neighbor: Displays all LLDP neighbor information.

Platforms

All

Output

The following output is an example of local LLDP information.

Sample Output: show system lldp

show system lldp
===============================================================================
LLDP Configuration
===============================================================================
Transmit Interval      : 30
Hold Multiplier        : 4
Reinit Delay           : 2
Notification Interval  : 5
Tx Credit Max          : 5
Message Fast Tx        : 1
Message Fast Tx Init   : 4
Admin Enabled          : True

-------------------------------------------------------------------------------
LLDP System Information
-------------------------------------------------------------------------------
Chassis Id Subtype     : 4
Chassis Id             : d8:1f:ff:00:00:00
System Name            : cses-V31
System Description     : TiMOS-B-0.0.I4269 both/i386 Nokia 7750 SR Copyright
                         (c) 2000-2016 Nokia.
                         All rights reserved. All use subject to applicable
                         license agreements.
                         Built on Wed Dec 3 19:14:27 PST 2014 by builder in /
                         rel0.0/I4269/panos/main
Capabilities Supported : bridge router
Capabilities Enabled   : bridge router

-------------------------------------------------------------------------------
LLDP Destination Addresses
-------------------------------------------------------------------------------
Index 1                : 01:80:c2:00:00:0e
Index 2                : 01:80:c2:00:00:03
Index 3                : 01:80:c2:00:00:00

-------------------------------------------------------------------------------
LLDP Remote Statistics
-------------------------------------------------------------------------------
Last Change Time       : 12/08/2014 21:34:48
Rem Table Inserts      : 10
Rem Table Deletes      : 1
Rem Table Drops        : 0
Rem Table Ageouts      : 3

-------------------------------------------------------------------------------
LLDP System Management Addresses
-------------------------------------------------------------------------------
Address SubType        : 1 (IPv4)
Address                : 10.1.1.31
Address If SubType     : 2
Address If Id          : 1
Address OID            : .1.3.6.1.4.1.6527.1.3.3
Address SubType        : 2 (IPv6)
Address                : 2001:db8:dead:beef::31
Address If SubType     : 2              
Address If Id          : 1
Address OID            : .1.3.6.1.4.1.6527.1.3.3

=============================================================================== 

show system lldp neighbor

Link Layer Discovery Protocol (LLDP) System Information
===============================================================================
NB = nearest-bridge   NTPMR = nearest-non-tpmr   NC = nearest-customer
===============================================================================
Lcl Port  Scope  Remote Chassis ID   Index  Remote Port     Remote System Name
-------------------------------------------------------------------------------
1/1/4     NB     D8:1D:FF:00:00:00   1      1/1/5           cses-v29
1/1/6     NB     D8:1D:FF:00:00:00   2      1/1/7           cses-v29
1/2/2     NB     D8:1F:FF:00:00:00   3      1/1/1           cses-v31
1/2/1     NB     D8:1E:FF:00:00:00   4      1/1/1           cses-v30
1/2/3     NB     D8:20:FF:00:00:00   5      1/1/1           cses-v32
1/2/4     NB     D8:21:FF:00:00:00   6      1/1/1           cses-V33
=============================================================================== 
Number of neighbors : 6

lldp

Syntax

lldp [neighbor]

Context

[Tree] (show>system lldp)

Full Context

show system lldp

Description

This command displays neighbor information for all configured ports without having to specify each individual port ID.

Parameters

neighbor: Displays LLDP neighbor information.

Platforms

All

Output

The following is an example of LLDP neighbor information.

Sample Output

*A:Dut-C# show system lldp neighbor
Link Layer Discovery Protocol (LLDP) System Information
==============================================================================
NB = nearest-bridge   NTMPR = nearest-non-tpmr   NC = nearest-customer
==============================================================================
Port      Scope  Chassis ID           Index    Port ID     System Name
------------------------------------------------------------------------------
1/1/1     NB     16:2f:ff:00:00:00    1        35717120    Dut-A
2/1/2     NB     16:34:ff:00:00:00    1        35782656    Dut-D
2/1/1     NB     16:36:ff:00:00:00    2        35684352    Dut-E
1/1/2     NB     16:30:ff:00:00:00    2        35749888    Dut-B
1/1/3     NB     16:30:ff:00:00:00    3        35782656    Dut-B
2/1/3     NB     16:30:ff:00:00:00    3        35815424    Dut-B
==============================================================================
Number of neighbors : 6
*A:Dut-C#


A:GHR-API# show system lldp neighbor
Link Layer Discovery Protocol (LLDP) System Information
==============================================================================
NB = nearest-bridge   NTMPR = nearest-non-tpmr   NC = nearest-customer
==============================================================================
Port      Scope  Chassis ID           Index    Port ID     System Name
------------------------------------------------------------------------------
1/1/6     NTPMR  00:21:05:1b:bc:17    1        36044800    RXI-AMI
1/1/8     NTPMR  00:21:06:6d:bd:53    2        36110336    YOY-WOW
1/1/9     NTPMR  00:21:08:2b:ab:81    3        36143104    FRI-MON
==============================================================================
Number of neighbors : 3

lldp

Syntax

lldp [bridge-mac] [remote-info] [detail]

Context

[Tree] (show>port>ethernet lldp)

Full Context

show port ethernet lldp

Description

This command displays LLDP information.

Parameters

bridge-mac: Specifies a keyword to filter the output.

remote-info: Displays remote information on the bridge MAC.

detail: Displays detailed information.

Platforms

All

lmm

Syntax

lmm [interval seconds] [repeat repeat] [absolute | rate]

Context

[Tree] (monitor>oam-pm>session lmm)

Full Context

monitor oam-pm session lmm

Description

This command monitors the Ethernet Loss Measurement Message (LMM) statistics for the specified test's raw measurement interval.

Parameters

seconds

Specifies the time interval, in seconds.

Values: 3 to 60

Default: 10

repeat

Specifies the number of times the command is repeated.

Values: 1 to 999

Default: 10

absolute: Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.

rate

Specifies that the rate-per-second is displayed.

Default: delta

Platforms

All

lmm

Syntax

lmm

Context

[Tree] (show>oam-pm>stats>session lmm)

Full Context

show oam-pm statistics session lmm

Description

This command selects the session's Ethernet LMM test for the statistical display.

Platforms

All

lmp

Syntax

lmp

Context

[Tree] (clear>router lmp)

Full Context

clear router lmp

Description

Commands in this context clear Link Management Protocol (LMP) statistics.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lmp

Syntax

lmp

Context

[Tree] (show>router lmp)

Full Context

show router lmp

Description

This command displays LMP information.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lmp

Syntax

lmp

Context

[Tree] (tools>dump>router lmp)

Full Context

tools dump router lmp

Description

This command dumps LMP information.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lns-group

Syntax

lns-group lns-group-id [associations]

lns-group lns-group-id statistics esa-vm vapp-id

lns-group [lns-group-id] esa-vm

lns-group lns-group-id mda mda-idstatistics

lns-group [lns-group-id] mda

lns-group

Context

[Tree] (show>isa lns-group)

Full Context

show isa lns-group

Description

This command shows information such as the number of ESAs provisioned and in service, the LNS group operational status, and the number of L2TP sessions and ESA VM associated to the LNS group, as well as the detailed statistics of the ESA VM in relation to the LNS group.

Parameters

lns-group-id

Specifies the LNS group identifier.

Values: 1 to 4

associations: Displays information associated with the LNS group in the ISA context.

statistics: Displays statistics information.

mda-id

Specifies the ESA and VM identifying an LNS group.

Values


mda-id:	slot/mda
	slot	1 to 10
	mda	1 to 2

vapp-id

Specifies the ESA and VM identifying an LNS group.

Values


vapp-id:	esa-id/vm-id
	esa-id	1 to 16
	vm-id	1 to 4

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following outputs are examples of the number of ESAs provisioned, the LNS group information status, and the statistics of the ESA VM in relation to the LNS group.

Sample Output

*A:LNS# show isa lns-group esa-vm 
===============================================================================
ISA LNS group ESA-VM's
===============================================================================
Group ESA-VM   State        Sessions
-------------------------------------------------------------------------------
1     1/1      inService    15290
2     2/1      inService    15761
3     1/2      inService    14413
4     2/2      inService    14533
-------------------------------------------------------------------------------
No. of ESA-VM's: 4
===============================================================================

Sample Output

*A:Dut-C# show isa lns-group 1 esa-vm 
===============================================================================
ISA LNS Group 1 ESA-VM's
===============================================================================
Group ESA-VM   State        Sessions
-------------------------------------------------------------------------------
1     1/1      inService    15290
-------------------------------------------------------------------------------
No. of ESA-VM's: 1
===============================================================================

Sample Output

*A:Dut-C# show isa lns-group 1 esa-vm  1/1 statistics 
===============================================================================
ISA LNS Group 1 ESA-VM 1/1 statistics
===============================================================================
upstream PPP control forwarded to CPM                   : 49147
upstream PPP forwarded to PPPoX                         : 2176118
upstream LCP Echo Rep                                   : 2176113
downstream forwarded to L2TP                            : 62444564
downstream LCP Echo Req                                 : 2210467
===============================================================================

lns-group

Syntax

lns-group lns-group-id statistics esa-vm vapp-id

lns-group lns-group-id mdamda-idstatistics

Context

[Tree] (clear>isa lns-group)

Full Context

clear isa lns-group

Description

This command clears the statistics for the identified VM within the specified LNS group.

Parameters

lns-group-id

Specifies the LNS group identifier.

Values: 1 to 4

statistics: Displays statistics information.

mda-id

Specifies the ESA and VM identifying an LNS group.

Values


mda-id:	slot/mda
	slot	1 to 10
	mda	1 to 2

vapp-id

Specifies the ESA and VM identifying an LNS group.

Values


vapp-id:	esa-id/vm-id
	esa-id	1 to 16
	vm-id	1 to 4

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

load-balance

Syntax

load-balance lag-id lag-id [class {1 | 2 | 3}]

Context

[Tree] (tools>perform>lag load-balance)

Full Context

tools perform lag load-balance

Description

Load balance specified LAG's links when per-link-hash weighted is deployed. Load balancing can be per specified class or on all classes if no class is specified.

Parameters

lag-id

Specifies the LAG ID.

Values: 1 to 800

class

Specifies the class.

Values: 1, 2, 3

Platforms

All

load-balance

Syntax

load-balance [service service-id]

Context

[Tree] (tools>perform>app-assure>group load-balance)

Full Context

tools perform application-assurance group load-balance

Description

This command rebalances AA subscribers between ISAs within a group, in case imbalance occurs such as with the addition of new cards.

Parameters

service service-id

Specifies the service

Values: 1 to 2147483648

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

load-balancing-alg

Syntax

load-balancing-alg [detail]

Context

[Tree] (show>system load-balancing-alg)

Full Context

show system load-balancing-alg

Description

This command displays system load balancing settings.

Parameters

detail: Displays port settings.

Platforms

All

Output

The following output is an example of load balancing information.

Sample Output

*A:bkvm15# show system load-balancing-alg 
===============================================================================
System-wide Load Balancing Algorithms
===============================================================================
L4 Load Balancing                      : exclude-L4
LSR Load Balancing                     : lbl-ip-l4-teid
System IP Load Balancing               : disabled
Multicast Enhanced Load Balancing      : disabled
Service ID LAG Hashing                 : disabled
===============================================================================
*A:bkvm15#

local-bfd-discrim

Syntax

local-bfd-discrim bfd-discriminator

Context

[Tree] (tools>dump>router>lsp-bfd local-bfd-discrim)

Full Context

tools dump router lsp-bfd local-bfd-discrim

Description

This command displays information for the BFD-on-LSP session with a specified local discriminator.

Parameters

bfd-discriminator

Specifies the BFD discriminator.

Values: to 4294967295

Platforms

All

local-dhcp-db

Syntax

local-user-db local-user-db-name

Context

[Tree] (tools>perform>subscr-mgmt>local-user-db local-dhcp-db)

Full Context

tools perform subscriber-mgmt local-user-db local-dhcp-db

Description

This command enables tools to control the local user database.

Parameters

local-user-db-name: Specifies the name of a local user database.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

local-dhcp-server

Syntax

local-dhcp-server server-name

Context

[Tree] (show>router>dhcp local-dhcp-server)

[Tree] (show>router>dhcp6 local-dhcp-server)

Full Context

show router dhcp local-dhcp-server

show router dhcp6 local-dhcp-server

Description

This command displays local DHCP or DHCP6 server information.

Parameters

server-name: Specifies information about the local DHCP server.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

local-dhcp-server

Syntax

local-dhcp-server server-name

Context

[Tree] (clear>router>dhcp6 local-dhcp-server)

[Tree] (clear>router>dhcp local-dhcp-server)

Full Context

clear router dhcp6 local-dhcp-server

clear router dhcp local-dhcp-server

Description

This command clears DHCP server data.

Parameters

server-name: Clears data for the specified local DHCP server.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

local-dhcp-server

Syntax

local-dhcp-server server-name

Context

[Tree] (tools>perform>router>dhcp6 local-dhcp-server)

[Tree] (tools>perform>router>dhcp local-dhcp-server)

Full Context

tools perform router dhcp6 local-dhcp-server

tools perform router dhcp local-dhcp-server

Description

This command enables tools to control the local DHCP server.

Parameters

server-name: Specifies the name of the local DHCP server.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

local-forward

Syntax

local-forward [local-forward-id]

Context

[Tree] (show>system>satellite local-forward)

Full Context

show system satellite local-forward

Description

This command displays satellite local forward services information.

Parameters

local-forward-id

Specifies the local forward ID.

Values: 1 to 10240

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

local-forward

Syntax

local-forward

Context

[Tree] (show>system>satellite>eth-sat local-forward)

Full Context

show system satellite eth-sat local-forward

Description

This command displays information for Ethernet satellite local forward services.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

local-sid

Syntax

local-sid [ipv6-address] [/prefix-length]] [locator locator-name] [longer] [end] [end-x] [end-dt4] [end-dt6] [end-dt46] [end-dx2] [context context] [end-dt2u] [ end-dt2m]

Context

[Tree] (show>router>srv6 local-sid)

Full Context

show router segment-routing-v6 local-sid

Description

This command displays SRv6 local-SID information.

Parameters

ipv6-address

Specifies the IPv6 address.

Values

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

locator-name: Specifies the locator name, up to 64 characters.

longer: Displays the specified route and subsets of the route.

end: Displays the End SID function of a locator.

end-x: Displays the End.X SID function associated with a P2P interface.

end-dt4: Displays the End.DT4 function associated with the Base routing instance.

end-dt6: Displays the End.DT6 function associated with the Base routing instance.

end-dt46: Displays the End.DT46 function associated with the Base routing instance.

end-dx2: Displays the End.DX2 function associated with the SRv6 instance in the service.

context

Specifies the router context.

Values: vprn-svc-name | 'Base' | vprn-svc-id

end-dt2u: Displays the End.DT2U function associated with the SRv6 instance in the service.

end-dt2m: Displays the End.DT2M function associated with the SRv6 instance in the service.

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

Output

The following output is an example of local SID information

Sample Output

*A:Dut-B# show router segment-routing-v6 local-sid  
 
=============================================================================== 
Segment Routing v6 Local SIDs 
=============================================================================== 
SID                                               Type           Function 
  Locator                                                         
  Context                                                         
------------------------------------------------------------------------------- 
2222:2:2:2:0:1::                                  End.DT2M       1 
  dutB_L1 
  SvcId: 1 Name: VPLS1 
2222:2:2:2:0:2::                                  End.DT2M       2 
  dutB_L1 
  SvcId: 2 Name: VPLS2 
2222:2:2:2:0:3::                                  End.DX2        3 
  dutB_L1 
  SvcId: 3 Name: EPIPE3 
2222:2:2:2:0:4::                                  End.DX2        4 
  dutB_L1 
  SvcId: 4 Name: EPIPE4 
2222:2:2:2:0:c351::                               End.DT2U       50001 
  dutB_L1 
  SvcId: 1 Name: VPLS1 
2222:2:2:2:0:c352::                               End.DT2U       50002 
  dutB_L1 
  SvcId: 2 Name: VPLS2 
2222:2:2:2:1:86a0::                               End            100000 
  dutB_L1 
  Base 
------------------------------------------------------------------------------- 
SIDs : 7 
------------------------------------------------------------------------------- 
===============================================================================

Local SID Field Descriptions describes local SID output fields.

Table 23. Local SID Field Descriptions
Field	Description
SID	The segment ID
Locator	The locator name
Context	The context of the SID
Type	The type of SRv6 behavior
Function	The function value
SIDs	The total number of SIDs

local-tx-pdu

Syntax

local-tx-pdu [domain md-index] [association ma-index] [mep mep-id]

Context

[Tree] (show>eth-cfm local-tx-pdu)

Full Context

show eth-cfm local-tx-pdu

Description

This command displays the transmission for ETH-CC, ETH-AIS, and ETH-CFM Grace (ETH-VSM or ETH-ED) using a character representation for each protocol per MEP. ETH-CC is expanded to include columns for RDI, Port Status TLV, and Interface Status TLV. The additional ETH-CC columns represent the actual transmitting value of the TLV, or "Absent” if not present in the ETH-CC PDU. These additional ETH-CC columns are represented with a series of dashes if the ETH-CC column under the TxPDU is a dash ("-”) or "c”.

The optional parameters are treated as independent and cumulative filters that are combined to refine the output. Rows in the output are populated for matches against all specified filters. Omitting all optional parameters produces output that includes all MEPs.

Parameters

md-index

Specifies the MD index.

Values: 1 to 4294967295

ma-index

Specifies the MA index.

Values: 1 to 4294967295

mep-id

Specifies the local MEP ID.

Values: 1 to 8191

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following is an example of local PDU transmission information. Local PDU Transmission Field Descriptions describes the local PDU transmission fields.

Sample Output

show eth-cfm local-tx-pdu
===============================================================================
Transmission PDU Type Legend:
C = CCM, c = CCM tx suppressed,  A = AIS, a = AIS pending,
G = ETH-VSM Grace, E = ETH-ED
===============================================================================
Eth-CFM Local Transmit PDU Information
===============================================================================
MdIndex    MaIndex    MepId SrcMacAddress     TxRdi PortTLV IfTLV  TxPdu
-------------------------------------------------------------------------------
10         1          28    d8:1c:01:01:00:01 ----- ------  ------ ---
12         1          28    00:00:00:00:00:28 False Absent  Absent C--
12         4000       28    00:00:00:00:00:28 False Absent  Absent C--
12         4001       28    00:00:00:00:00:28 False Absent  Absent C--
12         5001       28    d8:1c:01:02:00:01 ----- ------  ------ ---
13         1000       28    00:00:00:00:00:28 True  Up      Up     C--
13         1500       28    00:00:00:00:00:28 False Up      Up     C--
13         2000       28    00:00:00:00:00:28 False Absent  Absent C--
13         2000       128   d8:1c:01:02:00:01 ----- ------  ------ ---
13         2002       28    00:00:00:00:00:28 False Up      Up     C--
13         3000       28    00:00:00:00:00:28 True  Absent  Absent C--
13         4000       28    00:00:00:00:00:28 False Up      Up     C--
13         4001       28    00:00:00:00:00:28 False Up      Up     C--
14         100        28    00:00:00:00:00:28 False Absent  Absent C--
14         1000       28    d8:1c:ff:00:00:00 ----- ------  ------ ---
14         4001       28    00:00:00:00:00:28 False Absent  Absent C--
===============================================================================

Table 24. Local PDU Transmission Field Descriptions
Label	Description
MdIndex	The local MEP domain index
MaIndex	The local MEP association index
MepId	The local MEP identifier
SrcMacAddress	The local MEP source MAC address
TxRdi	The RDI value
PortTLV	The Port Status TLV value
IfTLV	The Interface Status TLV value
TxPDU	The transmission, summarized in three single-character columns. The left column displays ETH-CC, the middle column displays ETH-AIS, and the right column displays ETH-CFM Grace (ETH-VSM or ETH-ED). For ETH-AIS, "A” is displayed when a facility MEP has determined that the AIS state is active, regardless of interaction, linkages, or active transmission of associated MEPs.

local-user-db

Syntax

local-user-db local-user-db-name association [dhcp] [ppp] [l2tp] [ipoe-session-policy] [radius] [pppoe] [dhcp6] [capture-sap] [rtr-solicit] [wpp] [ipoe]

local-user-db local-user-db-name ipoe-all-hosts

local-user-db local-user-db-name ipoe-host ipoe-host-name

local-user-db local-user-db-name ipoe-unmatched-hosts

local-user-db [local-user-db-name]

local-user-db local-user-db-name pppoe-all-hosts

local-user-db local-user-db-name pppoe-host pppoe-host-name

local-user-db local-user-db-name pppoe-unmatched-hosts

Context

[Tree] (show>subscr-mgmt local-user-db)

Full Context

show subscriber-mgmt local-user-db

Description

This command displays local user database information.

Parameters

local-user-db-name: Specifies the name of a local user database up, to 32 characters.

association: Displays entities associated with the specified local user database.

dhcp: Displays DHCP information.

ppp: Displays PPP information.

l2tp: Displays L2TP information.

radius: Displays RADIUS information.

pppoe: Displays PPPoE information.

dhcp6: Displays DHCP6 information.

capture-sap: Displays capture SAP information.

rt-solicit: Displays RT solicit information.

wpp: Displays WPP information.

ipoe: Displays IPoE information.

ipoe-all-hosts: Displays IPoE all hosts information.

ipoe-host-name: Displays IPoE host name information.

ipoe-unmatched-hosts: Displays IPoE unmatched hosts information.

ppp-all-hosts: Displays information about PPP all hosts.

pppoe-hosts: Displays information about PPPoE hosts.

pppoe-unmatched-hosts: Displays information about PPPoE unmatched hosts.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an example of local user database information.

Sample Output

*A:ALA-48>show>subscr-mgmt# local-user-db
===============================================================================
Local User Databases
===============================================================================
Name                             Admin Host  Description
                                 State Count
-------------------------------------------------------------------------------
database01                       Down  1
database02 Provider001/Class0002 Down  0     This is a long testdescription wi*
test                             Down  2
-------------------------------------------------------------------------------
Number of Local User Databases : 3     Number of Hosts : 3
===============================================================================
* indicates that the corresponding row element may have been truncated.


*A:ALA-48>show>subscr-mgmt# local-user-db database01
===============================================================================
Local User Database "database01"
===============================================================================
Admin State          : Down
Last Mgmt Change     : 11/08/2007 12:27:36
Host Count           : 1
DHCP Match Types     : circ-id
DHCP CircId Mask Pfx : test
DHCP CircId Mask Sfx : N/A
PPPoE Match Types    : N/A
PPPoE CircId Mask Pfx: N/A
PPPoE CircId Mask Sfx: N/A
===============================================================================
*A:ALA-48>show>subscr-mgmt#


*A:ALA-48>show>subscr-mgmt# local-user-db database01 dhcp-all-hosts
===============================================================================
Local User Database "database01" DHCP hosts
===============================================================================
Name                             Admin     Matched objects
                                 State
-------------------------------------------------------------------------------
host001                          Down      -
-------------------------------------------------------------------------------
Number of DHCP Hosts : 1
===============================================================================

*A:ALA-48>show>subscr-mgmt# local-user-db "database01" dhcp-host host001
===============================================================================
DHCP Host "host001"
===============================================================================
Admin State          : Down
Last Mgmt Change     : 11/08/2007 12:13:42

Host Identification
 Circuit Id          : N/A
 Mac Address         : N/A
 Remote Id           : N/A
 Sap Id              : N/A
 Service Id          : N/A
 String              : N/A
 Option 60           : N/A
 System Id           : N/A

Matched Objects      : N/A

Address              : N/A

Identification Strings
 Subscriber Id       : N/A
 SLA Profile String  : N/A
 Sub Profile String  : N/A
 App Profile String  : N/A
 ANCP String         : N/A
 Inter Destination Id: N/A
===============================================================================

*A:ALA-48>show>subscr-mgmt# local-user-db "database01" dhcp-unmatched-hosts
==============================================================================
Local User Database "database01" DHCP unmatched hosts
==============================================================================
Name                              Reason      Duplicate Host
------------------------------------------------------------------------------
host002                           No match    N/A                             
host003                           Duplicate   host001                         
host004                           No match    N/A                             
host005                           Duplicate   host001                         
------------------------------------------------------------------------------
Number of DHCP Unmatched Hosts : 4
==============================================================================
*A:ALA-48>show>subscr-mgmt#


*A:ALA-48>show>subscr-mgmt# local-user-db "database01" association
===============================================================================
DHCP Servers where database01 is used
===============================================================================
Server-Name                      Router-Name                                   
-------------------------------------------------------------------------------
dhcpS1                           vprn1000                                      
-------------------------------------------------------------------------------
No. of Server(s): 1
===============================================================================
Interfaces where database01 is used for authentication
===============================================================================
Interface-Name                   Service-Id Type                               
-------------------------------------------------------------------------------
No. of Interface(s): 0
===============================================================================
*A:ALA-48>show>subscr-mgmt#


*A:ALA-48>show>subscr-mgmt# local-user-db "database01" association dhcp
===============================================================================
DHCP Servers where database01 is used
===============================================================================
Server-Name                      Router-Name                                   
-------------------------------------------------------------------------------
dhcpS1                           vprn1000                                      
-------------------------------------------------------------------------------
No. of Server(s): 1
===============================================================================
*A:ALA-48>show>subscr-mgmt#
===============================================================================

# show subscriber-mgmt local-user-db "ludb-1" association ipoe
===============================================================================
IPoE client interface associations for ludb-1
===============================================================================
Interface-Name                           Svc-Id     Type
-------------------------------------------------------------------------------
group-int-1-1                            1000       IES
group-int-1-1                            2000       VPRN
-------------------------------------------------------------------------------
No. of Interface(s): 2
===============================================================================
===============================================================================
Capture SAP associations for ludb-1
===============================================================================
SAP                              Svc-Id     Type   PPPoE PPP IPoE DHCP DHCP6 RS
-------------------------------------------------------------------------------
1/1/4:1202.*                     10         VPLS   y         y    y    y     y
1/1/4:*.*                        10         VPLS   y         y    y    y     y
-------------------------------------------------------------------------------
No. of SAP(s): 2
===============================================================================

Local User Database Field Descriptions describer subscriber management local user database output fields.

Table 25. Local User Database Field Descriptions
Field	Description
Name	The local user database name
Admin State	The administrative state of the local user database
Host Count	The number of hosts associated with the local user database
Description	The user-provided description of the local user database
Number of Local User Databases	The number of local user databases configured on the node
Number of Hosts	The number of hosts configured on the node
Last Mgmt Change	The sysUpTime at the time of the last modification
DHCP Match Types	The DHCP match type
DHCP CircId Mask Pfx	The DHCP circuit ID mask prefix
DHCP CircId Mask Sfx	The DHCP circuit ID mask suffix
PPPoE Match Types	The PPPoE match types; circuit-id, derived-id, dual-stack-remote-id, encap-tag-range, ip, mac, option60, remote-id, sap-id, service-id, string, system-id
PPPoE CircId Mask Pfx	The PPPoE circuit ID mask prefix
PPPoE CircId Mask Sfx	The PPPoE circuit ID mask suffix
Circuit Id	The circuit ID to match during host identification
Mac Address	The MAC address to matching during host identification
Remote Id	The remote ID from option 82 to match against
Sap Id	The SAP ID from the Nokia vendor specific sub-option in option 82 to match against
Service Id	The service ID to match during host identification
String	The string from the Nokia vendor specific sub-option in option 82 to match against
Option 60	The Vendor-Identifying Vendor Option to match against
System Id	The system ID from the Nokia vendor specific sub-option in option 82 to match against
Subscriber Id	The subscriber ID which is encoded in the identification strings
SLA Profile String	The SLA profile string which is encoded in the identification strings
Sub Profile String	The subscriber profile string which is encoded in the identification strings
App Profile String	The application profile string which is encoded in the identification strings
ANCP String	The ANCP string which is encoded in the identification strings
Inter Destination Id	The intermediate destination identifier which is encoded in the identification strings
Name	The unmatched host name
Reason	Indicates why this host is not matched
Duplicate Host	The name of the host that is already matched and that has the same values, configured for the objects that correspond with the match types, as this unmatched host
Server-Name	The service name of the unmatched host
Router-Name	The router name of the unmatched host
Interface-Name	The interface name of the unmatched host
Service-Id	The service ID that matches the host identification the Nokia vendor specific sub-option in option 82, or the service where the IPoE session is established
Interface-Name	The interface name associated with the local user database
Svc-Id Svc-Id	The service ID associated with the local user database
Type	The service type
SAP	The capture SAP associated with the local user database
PPPoE	PPPoE associated with the capture SAP; Y or N
PPP	PPPoE associated with the capture SAP; Y or N
IpoE	IPoE associated with the capture SAP; Y or N
DHCP	DHCP associated with the capture SAP; Y or N
DHCP6	DHCP6 associated with the capture SAP; Y or N
RS	RS associated with the capture SAP; Y or N
No. of SAP(s)	The total number of SAPs

local-user-db

Syntax

local-user-db local-user-db-name

Context

[Tree] (tools>perform>subscr-mgmt local-user-db)

Full Context

tools perform subscriber-mgmt local-user-db

Description

This command provides tools to control the local user database.

Parameters

local-user-db-name: Specifies the name of a local user database up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

locator

Syntax

locator [mt {0 | 2}] [prefixipv6-prefix[/prefix-length]] [adv-routersystem-id | hostname] [algo algo-id]

Context

[Tree] (show>router>isis>srv6 locator)

Full Context

show router isis segment-routing-v6 locator

Description

This command displays IS-IS SRv6 locators.

Parameters

ipv6-prefix[/prefix-length]

Displays routes only matching the specified ip-address and length.

Values

ipv6-prefix[/prefix]: x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

prefix-length: 1 to 128

system-id | hostname: Displays information for the specific IS-IS advertising router. The host name can be up to 38 characters.

algo-id

Displays information for the specified algorithm.

Values: 0 to 255

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

locator

Syntax

locator [locator-name]

Context

[Tree] (show>router>srv6 locator)

Full Context

show router segment-routing-v6 locator

Description

This command displays the SRv6 locator status.

Parameters

locator-name: Specifies the locator name, up to 64 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

lockout

Syntax

lockout aps-id

Context

[Tree] (tools>perform>aps lockout)

Full Context

tools perform aps lockout

Description

This command locks out the protection circuit.

Parameters

aps-id

Specifies the APS ID.

Values


aps-id	aps-group-id
	aps	keyword
	group-id	1 to 128

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

lockout

Syntax

lockout idtunnel-id

lockout lsp-name

Context

[Tree] (tools>perform>router>mpls>tp-tunnel lockout)

Full Context

tools perform router mpls tp-tunnel lockout

Description

This command performs a lockout of protection for an MPLS-TP LSP. This prevents a switchover to the protect path.

Parameters

tunnel-id

Specifies the tunnel number of the MPLS-TP LSP.

Values: 0 to 42949667295

lsp-name: Specifies the name of the MPLS-TP LSP, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lockout

Syntax

lockout router router-id local-gateway-address local-gateway-address mda mda

lockout router router-id local-gateway-address local-gateway-address esa-vm esa-id/vm-id

lockout router router-id local-gateway-address local-gateway-address remote ip-address[:port]

lockout router router-id mda mda

Context

[Tree] (show>ipsec lockout)

Full Context

show ipsec lockout

Description

This command displays the lockout status for the specified IPsec clients. If remote address information is not specified, the system displays a list of clients that have been locked out on the specified ISA, along with the IPsec gateway if local-gateway-address is specified.

Parameters

router-id: Specifies the ID of the router where the IPsec gateway is configured.

local-gateway-address: Specifies the IP address of the local IPsec gateway.

mda: Specifies the MDA ID of the ISA.

ip-address: Specifies the IP address of the remote client.

port: Specifies the port of the remote client.

esa-vm

Displays the ID of the configured ESA and ESA VM.

Values


esa-vm:	esa-id/vm-id
	esa-id	1 to 16
	vm-id	1 to 4

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of lockout information.

Sample Output

show ipsec lockout router 300 local-gateway-address 172.16.100.1 remote
192.168.61.100:500 
===============================================================================
IPsec Lockout Client
===============================================================================
Lockout               : True
Router ID             : 300
Local Gateway Address : 172.16.100.1
Lockout Client Address: 192.168.61.100
Lockout Client Port   : 500
No. of Failed Attempts: 2
No. of Dropped Packets: 2
Remaining Block Time  : 289 seconds
===============================================================================

lockout

Syntax

lockout router router-id

lockout router router-id local-gateway-address local-gateway-address

lockout router router-id local-gateway-address local-gateway-address remote ip-address[:port]

Context

[Tree] (clear>ipsec lockout)

Full Context

clear ipsec lockout

Description

This command clears the lockout state for the specified clients. If remote address information is not specified, the system clears the lockout state for all clients within the specified routing instance, along with all clients within the specified IPsec gateway if local-gateway-address is specified.

Parameters

router-id: Specifies the ID of the router where the IPsec gateway is configured.

local-gateway-address: Specifies the IP address of the local IPsec gateway.

ip-address: Specifies the IP address of the remote client.

port: Specifies the port of the remote client.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

lockout-annexb

Syntax

lockout-annexb aps-id

Context

[Tree] (tools>perform>aps lockout-annexb)

Full Context

tools perform aps lockout-annexb

Description

This command locks out the Annex B APS group.

Parameters

aps-id

Specifies the APS ID.

Values


aps-id	aps-group-id
	aps	keyword
	group-id	1 to 128

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

log

Syntax

log

Context

[Tree] (show log)

Full Context

show log

Description

Commands in this context display event and accounting policy log information.

Platforms

All

log

Syntax

log

Context

[Tree] (show>service>id log)

Full Context

show service id log

Description

This command displays event and accounting policy log information.

Platforms

All

log

Syntax

log

Context

[Tree] (show>li log)

Full Context

show li log

Description

This command displays LI event log information.

Platforms

All

log

Syntax

log log-id

Context

[Tree] (clear>li log)

Full Context

clear li log

Description

This command clears LI event log information.

Parameters

log-id

Specifies the log ID.

Values: 1 to 100

Platforms

All

log

Syntax

log [bindings]

log log-id [match string]

Context

[Tree] (show>filter log)

Full Context

show filter log

Description

This command shows the contents of a memory-based or a file-based filter log.

If the optional keyword match and string parameter are given, the command displays the given filter log from the first occurrence of the given string.

Parameters

bindings: Displays the number of filter logs currently instantiated.

log-id

Specifies the filter log ID destination expressed as a decimal integer.

Values: 101 to 199

string: Specifies to start displaying the filter log entries from the first occurrence of string.

Platforms

All

Output

The following output is an example of filter log entry information, and Filter Log Output Fields describes the fields. If log summary is active, the filter log mini-tables contain the information described in Filter Log Summary Mini-Table Fields.

Sample Output

2007/04/13 16:23:09  Filter: 100:100  Desc: Entry-100                  
Interface: to-ser1  Action: Forward                                    
Src MAC: 04-5b-01-01-00-02  Dst MAC: 04-5d-01-01-00-02  EtherType: 0800
Src IP: 10.10.0.1:646  Dst IP: 10.10.0.4:49509  Flags:   TOS: c0       
Protocol: TCP  Flags: ACK                                              
                                                                       
2007/04/13 16:23:10  Filter: 100:100  Desc: Entry-100                  
Interface: to-ser1  Action: Forward                                    
Src MAC: 04-5b-01-01-00-02  Dst MAC: 04-5d-01-01-00-02  EtherType: 0800
Src IP: 10.10.0.1:646  Dst IP: 10.10.0.3:646  Flags:   TOS: c0         
Protocol: UDP                                                          

2007/04/13 16:23:12  Filter: 100:100  Desc: Entry-100                  
Interface: to-ser1  Action: Forward                                    
Src MAC: 04-5b-01-01-00-02  Dst MAC: 01-00-5e-00-00-05  EtherType: 0800
Src IP: 10.10.13.1  Dst IP: 224.0.0.5  Flags:   TOS: c0                
Protocol: 89                                                           
Hex: 02 01 00 30 0a 0a 00 01 00 00 00 00 ba 90 00 00                   
     00 00 00 00 00 00 00 00 ff ff ff 00 00 03 02 01                   

A:ALA-A>config# show filter log bindings
===============================================================================
Filter Log Bindings
===============================================================================
Total Log Instances (Allowed)          : 2046
Total Log Instances (In Use)           : 0
Total Log Bindings                     : 0
-------------------------------------------------------------------------------
Type  FilterId EntryId   Log    Instantiated
-------------------------------------------------------------------------------
No Instances found
===============================================================================
A:ALA-A>config#

A summary log is printed only in case TotCnt is different from 0. Only the address types with at least 1 entry in the mini-table are printed.

A:ALA-A>config# show filter log 190
===============================================================================
Summary Log[190] Crit1: SrcAddr TotCnt:       723 ArpCnt:     83
 Mac          8  06-06-06-06-06-06
 Mac          8  06-06-06-06-06-05
 Mac          8  06-06-06-06-06-04
 Mac          8  06-06-06-06-06-03
 Mac          8  06-06-06-06-06-02
  Ip         16  10.6.6.1
  Ip         16  10.6.6.2
  Ip         16  10.6.6.3
  Ip         16  10.6.6.4
  Ip          8  10.6.6.5
Ipv6          8  3ffe:1616:1616:1616:1616:1616::
Ipv6          8  3ffe:1616:1616:1616:1616:1616:ffff:ffff
Ipv6          8  3ffe:1616:1616:1616:1616:1616:ffff:fffe
Ipv6          8  3ffe:1616:1616:1616:1616:1616:ffff:fffd
Ipv6          8  3ffe:1616:1616:1616:1616:1616:ffff:fffc 
===============================================================================
A:ALA-A

Log Message Formatting — Each filter log entry contains the following information in case summary log feature is not active (as appropriate).

Table 26. Filter Log Output Fields
Label	Description
yyyy/mm/dd hh:mm:ss	The date and timestamp for the log filter entry where yyyy is the year, mm is the month, dd is the day, hh is the hour, mm is the minute and ss is the second
Filter	The filter ID and the entry ID which generated the filter log entry in the form Filter_ID:Entry_ID
Desc	The description of the filter entry ID which generated the filter log entry
Interface	The IP interface on which the filter ID and entry ID was associated which generated the filter log entry
Action	The action of the filter entry on the logged packet
Src MAC	The source MAC address of the logged packet
Dst MAC	The destination MAC of the logged packet
EtherType	The Ethernet type of the logged Ethernet type II packet
Src IP	The source IP address of the logged packet; the source port is displayed after the IP address as appropriate separated with a colon
Dst IP	The destination IP address of the logged packet; the source port is displayed after the IP address as appropriate separated with a colon
Flags (IP flags)	M — the more fragments IP flag is set in the logged packet DF — the do not fragment IP flag is set in the logged packet
TOS	The ToS byte value in the logged packet
Protocol	The IP protocol of the logged packet (TCP, UDP, ICMP or a protocol number in hex)
Flags (TCP flags)	URG — Urgent bit set ACK — Acknowledgment bit set RST — Reset bit set SYN — Synchronize bit set FIN — Finish bit set
HEX	If an IP protocol does not have a supported decode, the first 32 bytes following the IP header are printed in a hex dump Log entries for non-IP packets include the Ethernet frame information and a hex dump of the first 40 bytes of the frame after the Ethernet header
Total Log Instances (Allowed)	Specifies the maximum allowed instances of filter logs allowed on the system
Total Log Instances (In Use)	Specifies the instances of filter logs presently existing on the system
Total Log Bindings	Specifies the count of the filter log bindings presently existing on the system
Type	The type of service of the service ID
Filter ID	Uniquely identifies an IP filter as configured on the system
Entry ID	The identifier which uniquely identifies an entry in a filter table
Log	Specifies an entry in the filter log table
Instantiated	Specifies if the filter log for this filter entry has or has not been instantiated

If the packet being logged does not have a source or destination MAC address (that is, POS) then the MAC information output line is omitted from the log entry.

If log summary is active, the filter log mini-tables contain the information described in Filter Log Summary Mini-Table Fields.

Table 27. Filter Log Summary Mini-Table Fields
Label	Description
Summary Log LogID	Displays the log ID
Crit1	Summary criterion that is used as index into the mini-tables of the log
TotCnt	The total count of logs
ArpCnt	Displays the total number of ARP messages logged for this log ID
Src... Dst...	The address type indication of the key in the mini-table
count	The number of messages logged with the specified source/destination address
address	The address for which count messages where received

log

Syntax

log log-id

Context

[Tree] (clear>filter log)

Full Context

clear filter log

Description

Clears the contents of a memory or file based filter log.

This command has no effect on a syslog based filter log.

Parameters

log-id

Specifies the filter log ID as a decimal integer.

Values: 101 to 199

Platforms

All

log

Syntax

log log-id

Context

[Tree] (clear log)

Full Context

clear log

Description

The clear log log-id command has been deprecated and replaced by the clear log log-id log-id command. The clear log log-id command continues to be supported, but it is recommended to use the clear log log-id log-id command instead.

Parameters

log-id

Specifies the event log ID to be initialized or rolled over.

Values: 1 to 100

Platforms

All

log

Syntax

log

Context

[Tree] (tools>dump log)

Full Context

tools dump log

Description

Commands in this context dump log information.

Platforms

All

log

Syntax

log

Context

[Tree] (tools>perform log)

Full Context

tools perform log

Description

This command enables tools for event logging.

Platforms

All

log-collector

Syntax

log-collector

Context

[Tree] (show>log log-collector)

Full Context

show log log-collector

Description

This command shows log collector statistics for the main, security, change and debug log collectors.

Platforms

All

Output

The following is an example of log collector information.

Show Log-Collector Output Fields describes log-collector output fields.

Sample Output

A:ALA-1# show log log-collector
===============================================================================
Log Collectors
===============================================================================
Main                Logged   : 1224                    Dropped  : 0
  Dest Log Id: 99    Filter Id: 0      Status: enabled    Dest Type: memory
  Dest Log Id: 100   Filter Id: 1001   Status: enabled    Dest Type: memory

Security            Logged   : 3                       Dropped  : 0

Change              Logged   : 3896                    Dropped  : 0

Debug               Logged   : 0                       Dropped  : 0

===============================================================================
A:ALA-1#

Table 28. Show Log-Collector Output Fields
Label	Description
<Collector Name>	Main — The main event stream contains the events that are not explicitly directed to any other event stream. Security — The security stream contains all events that affect attempts to breach system security such as failed login attempts, attempts to access MIB tables to which the user is not granted access or attempts to enter a branch of the CLI to which access has not been granted. Change — The change event stream contains all events that directly affect the configuration or operation of this node. Debug — The debug-trace stream contains all messages in the debug stream.
Dest. Log ID	Specifies the event log stream destination.
Filter ID	The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination.
Status	Enabled — Logging is enabled. Disabled — Logging is disabled.
Dest. Type	Console — A log created with the console type destination displays events to the physical console device. Events are displayed to the console screen whether a user is logged in to the console or not. Session — A user logged in to the console device or connected to the CLI via a remote telnet or SSH session can also create a log with a destination type of 'session'. Events are displayed to the session device until the user logs off. Syslog — Log events are sent to a syslog receiver. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the compact flash disks. Memory — All selected log events are directed to an in-memory storage area.

log-events

Syntax

log-events repeating-events

Context

[Tree] (clear>log log-events)

Full Context

clear log log-events

Description

This command cancels all log events that are currently repeating. All repeating log events will stop repeating. See the repeat parameter of the configure log event-control.

Platforms

All

log-id

Syntax

log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-seq]] [ count count] [subject subject [regexp]] [ ascending | descending] [message format [msg-regexp]]

Context

[Tree] (show>service>id>log log-id)

Full Context

show service id log log-id

Description

This command displays an event log summary with settings and statistics or the contents of a specific log file, SNMP log, or memory log.

If the command is specified with no command line options, a summary of the defined system logs is displayed. The summary includes log settings and statistics.

If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of the log. Additional command line options control what and how the contents are displayed.

Contents of logs with console, session or syslog destinations cannot be displayed. The actual events can only be viewed on the receiving syslog or console device.

Parameters

log-id

Displays the contents of the specified file log or memory log ID. The log ID must have a destination of an SNMP or file log or a memory log for this parameter to be used.

Values: 1 to 100

Default: Displays the event log summary.

severity-level

Displays only events with the specified and higher severity.

Values: cleared, indeterminate, critical, major, minor, warning

Default: All severity levels.

application

Displays only events generated by the specified application.

Values: application_assurance, aps, atm, bfd, bgp, calltrace, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gmpls, gtungrp, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, lmp, logger, mcac, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls, mpls_tp, mrp, msdp, nat, ntp, oam, open_flow, ospf, pcep, pim, pim_snooping, port, ppp, pppoe, pppoe_clnt, ptp, pxc, python, qos, radius, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

Default: All applications.

from-seq [to-seq]

Displays the log entry numbers from a particular entry sequence number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than the from-seq value.

If the to-seq number is not provided, the log contents to the end of the log is displayed unless the count parameter is present in which case the number of entries displayed is limited by the count.

Values: 1 to 4294967295

Default: All sequence numbers.

count

Limits the number of log entries displayed to the number specified.

Values: 1 to 4294967295

Default: All log entries.

subject: Displays only log entries matching the specified text subject string, up to 32 characters. The subject is the object affected by the event, for example the port-id would be the subject for a link-up or link-down event.

regexp: Specifies to use a regular expression as parameters with the specified subject string.

ascending | descending

Specifies sort direction. Logs are normally shown from the newest entry to the oldest in descending sequence number order on the screen. When using the ascending parameter, the log is shown from the oldest to the newest entry.

Default: Descending.

format: Specifies a message string, up to 400 characters, to be used in the display criteria.

msg-regexp: Specifies to use a regular expression as parameters with the specified message string.

Platforms

All

Output

Show Log-ID Field Descriptions describes the log ID field output.

Table 29. Show Log-ID Field Descriptions
Label	Description
Log Id	An event log destination.
Source	no — The event log filter is not currently in use by a log ID. yes — The event log filter is currently in use by a log ID.
Filter ID	The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination.
Admin State	Up — Indicates that the administrative state is up. Down — Indicates that the administrative state is down.
Oper State	Up — Indicates that the operational state is up. Down — Indicates that the operational state is down.
Logged	The number of events that have been sent to the log source(s) that were forwarded to the log destination.
Dropped	The number of events that have been sent to the log source(s) that were not forwarded to the log destination because they were filtered out by the log filter.
Dest. Type	Console — All selected log events are directed to the system console. If the console is not connected, then all entries are dropped. Syslog — All selected log events are sent to the syslog address. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the CPM's compact flash disks. (7750 SR and 7450 ESS only). Memory — All selected log events are directed to an in-memory storage area.
Dest ID	The event log stream destination.
Size	The allocated memory size for the log.
Time format	The time format specifies the type of timestamp format for events sent to logs where log ID destination is either syslog or file. When the time format is UTC, timestamps are written using the Coordinated Universal Time value. When the time format is local, timestamps are written in the system's local time.

log-id

Syntax

log-id [log-id |log-name] [severity severity-level] [application application] [sequence from-seq [to-seq]] [ count count] [router router-instance [expression]] [subject subject [regexp]] [{ ascending | descending}] [message message[msg-regexp]]

Context

[Tree] (show>li>log log-id)

Full Context

show li log log-id

Description

This command displays information for specified log.

Parameters

log-id | log-name

Specifies the log ID or name.

Values: 1 to 100

severity-level

Specifies the severity level.

Values: cleared, indeterminate, critical, major, minor, warning

application

Specifies the application name.

Values: application_assurance, aps, atm, auto_prov, bfd, bgp, bier, bmp, calltrace, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gmpls, gtp, gtungrp, icl, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, lmp, logger, macsec, mcac, mcpath, mc_redundancy, mgmt_core, mirror, mld, mld_snooping, mpls, mpls_tp, mpls_lmgr, mrp, msdp, nat, nge, ntp, oam, open_flow, ospf, pcap, pcep, pfcp, pim, pim_snooping, port, ppp, pppoe, pppoe_clnt, profile, ptp, pxc, python, qos, radius, rib_api, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, sr_policy, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

from-seq [to-seq]

Specifies the sequence value.

Values: 1 to 4294967295

count

Specifies the count.

Values: 1 to 4294967295

router-instance: Specifies the router instance.

subject: Specifies a subject string to match.

regexp: Specifies to use a regular expression match.

ascending | descending: Specifies the sort direction.

message: Specifies the message, up to 400 characters.

msg-regexp: Specifies to use a message regular expression match.

Platforms

All

log-id

Syntax

log-id [log-id | log-name] [severity severity-level] [application application] [sequence from-seq [to-seq]] [ count count] [router router-instance [expression]] [subject subject [regexp]] [ascending | descending] [message message [msg-regexp]]

Context

[Tree] (show>log log-id)

Full Context

show log log-id

Description

This command displays an event log summary with settings and statistics or the contents of a specific log file, SNMP log, or memory log.

If the command is specified with no command line options, a summary of the defined system logs is displayed. The summary includes log settings and statistics.

If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of the log. Additional command line options control what and how the contents are displayed.

Contents of logs with console, session or syslog destinations cannot be displayed. The actual events can only be viewed on the receiving syslog or console device.

Parameters

log-id | log-name

Displays the contents of the specified file log or memory log ID. The log ID, or optional log name (up to 64 characters), must have a destination of an SNMP or file log or a memory log for this parameter to be used.

Default: Displays the event log summary

Values: 1 to 101

severity-level

Displays only events with the specified and higher severity.

Default: All severity levels

Values: cleared, indeterminate, critical, major, minor, warning

application

Displays only events generated by the specified application.

Default: All applications

The following values are examples of applications:

Values: bgp, cflowd, chassis, dhcp, debug, filter, igmp, ip, isis, lag, ldp, lldp, logger, mirror, mpls, oam, ospf, pim, port, ppp, rip, route_policy, rsvp, security, snmp, stp, svcmgr, system, user, vrrp, vrtr, ospf_ng, ntp

expression: Specifies to use a regular expression as match criteria for the router instance string.

from-seq [to-seq]

Displays the log entry numbers from a particular entry sequence number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than the from-seq value.

If the to-seq number is not provided, the log contents to the end of the log is displayed unless the count parameter is present in which case the number of entries displayed is limited by the count.

Default: All sequence numbers

Values: 1 to 4294967295

count

Limits the number of log entries displayed to the number specified.

Default: All log entries

Values: 1 to 4294967295

router-instance: Specifies a router name up to 32 characters in length to be used in the display criteria.

message: Specifies a message string up to 400 characters in length to be used in the display criteria.

msg-regexp: Specifies to use a regular expression as parameters with the specified message string.

subject: Displays only log entries matching the specified text subject string. The subject is the object affected by the event, for example the port-id would be the subject for a link-up or link-down event.

regexp: Specifies to use a regular expression as parameters with the specified subject string.

ascending | descending

Specifies sort direction. Logs are normally shown from the newest entry to the oldest in descending sequence number order on the screen. When using the ascending parameter, the log is shown from the oldest to the newest entry.

Default: Descending

Platforms

All

Output

The following is an example of log ID information.

Log-Id Output Field Descriptions describes the log ID field output.

Sample Output

A:bkvm30# show log log-id
==============================================================================
Event Logs
==============================================================================
Log Source    Filter Admin Oper       Logged     Dropped Dest       Dest Size
Name/         Id     State State                         Type       Id
Id
------------------------------------------------------------------------------
1 
1   none      none   up    down            0           0 none             N/A
5 
5   D         none   up    up              0           0 cli             1024
15 
15  M         none   up    up             24           0 cli              512
20 
20  S         none   up    up             12           0 memory           256
21 
21  C         none   up    up            258           0 memory           256
22 
22  M S C     none   up    up            288           0 file       15    N/A
33 
33  M S C     none   up    down            0           0 none             N/A
34 
34  none      none   up    down            0           0 file       33    N/A
35 
35  M S       none   up    up             36           0 memory           100
55 
55  C         none   up    down            0           0 cli              500
77 
77  S         none   up    up              0           0 cli              100
82 
82  none      none   up    down            0           0 none             N/A
99 
99  M         none   up    up            122           0 memory           500
100 
100 M         1001   up    up             10         112 memory           500
==============================================================================

Sample Memory or File Event Log Contents Output

A:admin@Dut-A# show log log-id log-id 10 
=============================================================================== 
Event Log 10 
=============================================================================== 
Description : (Not Specified) 
Memory Log contents  [size=100   next event=13  (not wrapped)] 
12 2018/02/20 10:12:00.429 UTC MINOR: DEBUG #2001 Base GRPC 
"GRPC: RPC-2: gNMI.Subscribe 
 Client URI: ipv4:192.99.5.0:49648 
 Username: admin 
Received message of type gnmi.SubscribeRequest: 
 .request = subscribe: 
  .encoding: 0 = JSON 
  .mode: 0 = STREAM 
  .prefix: / 
  .subscription (1): 
   .path: /state/router[router-instance=*]/interface[interface-name=*]/ipv4/oper-state 
   .mode: 1 = ON_CHANGE 
   .sample_interval: 10000000000 
" 
11 2018/02/20 10:12:00.422 UTC MINOR: DEBUG #2001 Base GRPC 
"GRPC: RPC-2: gNMI.Subscribe 
 Client URI: ipv4:192.99.5.0:49648 
 Username: admin 
Client called RPC. 
Now waiting till first message arrive. 
" 

A:gal171# show log log-id 99
===============================================================================
Event Log 99
===============================================================================
Description : Default System Log
Memory Log contents  [size=500   next event=70  (not wrapped)]
 
69 2007/01/25 18:20:40.00 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode.  There is no standby CPM card."
 
68 2007/01/25 17:48:38.16 UTC WARNING: SYSTEM #2006 Base LOGGER
"New event throttle interval 10, configuration modified"
 
67 2007/01/25 00:34:53.97 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode.  There is no standby CPM card."
 
66 2007/01/24 22:59:22.00 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode.  There is no standby CPM card."
 
65 2007/01/24 02:08:47.92 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode.  There is no standby CPM card."
...
===============================================================================
A:gal171

A:NS061550532>config>log>snmp-trap-group# show log log-id 1 
===============================================================================
Event Log 1
===============================================================================
SNMP Log contents  [size=100   next event=3  (not wrapped)]
Cannot send to SNMP target address 10.1.1.1.
Waiting to replay starting from event #2
 
14 2000/01/05 00:54:09.11 UTC WARNING: MPLS #2007 Base VR 1:
"Instance is in administrative state: inService, operational state: inService"
 
13 2000/01/05 00:54:09.11 UTC WARNING: MPLS #2008 Base VR 1:
"Interface linkToIxia is in administrative state: inService, operational state:
 inService"
....
===============================================================================
A:NS061550532>config>log>snmp-trap-group#

Table 30. Log-Id Output Field Descriptions
Label	Description
Log Name/Id	An event log destination.
Source	no — The event log filter is not currently in use by a log ID. yes — The event log filter is currently in use by a log ID.
Filter ID	The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination.
Admin State	Up — Indicates that the administrative state is up. Down — Indicates that the administrative state is down.
Oper State	Up — Indicates that the operational state is up. Down — Indicates that the operational state is down.
Logged	The number of events that have been sent to the log source(s) that were forwarded to the log destination.
Dropped	The number of events that have been sent to the log source(s) that were not forwarded to the log destination because they were filtered out by the log filter.
Dest. Type	Console — All selected log events are directed to the system console. If the console is not connected, then all entries are dropped. Syslog — All selected log events are sent to the syslog address. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the CPM's compact flash disks. Memory — All selected log events are directed to an in-memory storage area.
Dest ID	The event log stream destination.
Size	The allocated memory size for the log.
Time format	The time format specifies the type of timestamp format for events sent to logs where log ID destination is either syslog or file. When the time format is UTC, timestamps are written using the Coordinated Universal Time value. When the time format is local, timestamps are written in the system's local time.

log-id

Syntax

log-id log-id

Context

[Tree] (clear>log log-id)

Full Context

clear log log-id

Description

Reinitializes or rolls over the specified memory/file event log ID. Memory logs are reinitialized and cleared of contents. File logs are manually rolled over by this command.

This command is only applicable to event logs that are directed to file destinations and memory destinations.

SNMP, syslog, console, or session logs are not affected by this command.

Parameters

log-id

Specifies the event log ID to be initialized or rolled over.

Values: 1 to 100

Platforms

All

logger-event-bundling

Syntax

logger-event-bundling

Context

[Tree] (tools>dump>router>mpls logger-event-bundling)

Full Context

tools dump router mpls logger-event-bundling

Description

This command dumps logger event bundling information for MPLS.

Platforms

All

longer

Syntax

longer

Context

[Tree] (show>router>bgp>routes longer)

Full Context

show router bgp routes longer

Description

This command displays the specified BGP route and subsets of the route.

Platforms

All

loopback

Syntax

loopback

Context

[Tree] (tools>perform>service>id loopback)

Full Context

tools perform service id loopback

Description

Tools for placing and removing SAPs and SDP bindings in data loopback. Overwrite occurs for any SAP or SDP binding when issuing a subsequent loopback command on the same SAP or SDP binding.

Interactions: Loopback functions are only applicable to Epipe, PBB Epipe, VPLS, I-VPLS and PBB core service contexts.

Platforms

All

loopback

Syntax

loopback

Context

[Tree] (tools>dump>service loopback)

Full Context

tools dump service loopback

Description

This command displays all configured Ethernet loopbacks.

Platforms

All

loopback

Syntax

loopback sap sap-id

loopback sdp sdp-id:vc-id

Context

[Tree] (tools>dump>service>id loopback)

Full Context

tools dump service id loopback

Description

This command displays configured service-specific Ethernet loopbacks.

Parameters

sap-id

Specifies the SAP ID.

Values


null	port-id \| lag-id
dot1q	{port-id \| lag-id}:{qtag1 \| cp-conn-prof-id
qinq	{port-id \| lag-id}:{qtag1 \| cp-conn-prof-id}.{qtag2 \| cp-conn-prof-id} cp: keyword conn-prof-id: 1..8000
port-id	slot/mda/port [.channel]
	eth-sat-id: esat-id/slot/port
	esat: keyword
	id: 1 to 20
	pxc-id: pxc-id.sub-port
	pxc pxc-id.sub-port
	pxc: keyword
	id: 1 to 64
	sub-port: a, b
lag-id	lag-id lag: keyword id: 1..800
qtag1	0..4094
qtag2	* \| null \| 0..4094

sdp-id:vc-id

Specifies the SDP ID and VC-ID.

Values

sdp-id: 1 to 17407

vc-id: 1 to 4294967295

Platforms

All

lsn

Syntax

lsn create router router-instance [b4 ipv6-address] [aftr ipv6-address] ip ip-address protocol {tcp | udp} [port port] lifetime lifetime [outside-ip ipv4-address] [outside-port port] [nat-policynat-policy-name]

lsn delete router router-instance [b4 ipv6-address] ip ip-address protocol {tcp | udp} port port [nat-policynat-policy-name]

lsn modify router router-instance [b4 ipv6-address] ip ip-address protocol {tcp | udp} port port lifetime lifetime [nat-policynat-policy-name]

Context

[Tree] (tools>perform>nat>port-forwarding-action lsn)

Full Context

tools perform nat port-forwarding-action lsn

Description

This command enables large-scale NAT port forwarding actions.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is sample output for this command.

Sample Output

*A:SR12_PPPOE# tools perform nat port-forwarding-action  lsn create router 100 
ip 10.2.3.4 protocol tcp lifetime infinite outside-port 666 
*A:SR12_PPPOE# tools perform nat port-forwarding-action  lsn create router 100 
ip 10.2.3.4 protocol udp lifetime infinite outside-port 666 
*A:SR12_PPPOE# configure system persistence nat-port-forwarding location cf3: 
*A:SR12_PPPOE# tools dump persistence nat-port-forwarding 
----------------------------------------
Persistence Info
----------------------------------------
Client                : nat-fwds
File Info :
 Filename             : cf3:\nat_fwds.002
 File State           : CLOSED (Not enough space on disk)
Subsystem Info :
 Nbr Of Registrations : 524288
 Registrations In Use : 2
 Subsystem State      : NOK
*A:SR12_PPPOE#  

show+service+nat
|   |   |   +---port-forwarding-entries
|   |   |   |   +---classic-lsn-sub
|   |   |   |   +---dslite-lsn-sub
|   |   |   |   +---l2-aware-sub
|   |   |   |   +---nat64-lsn-sub

lsn-blocks

Syntax

lsn-blocks [inside-router router-instance] [inside-ip ip-address] [outside-ip-prefix ip-prefix/length] [outside-port [0..65535]] [pool pool-name]

Context

[Tree] (show>router>nat lsn-blocks)

Full Context

show router nat lsn-blocks

Description

This command displays large scale NAT blocks.

Parameters

router-instance

Specifies the router instance name and service ID.

Values


router-name:	Base , management
service-id:	1 to 2147483647
svc-name:	A string up to 64 characters.

ip-address: Specifies the IP address in a.b.c.d format.

ip-prefix

Specifies the IP prefix.

Values: a.b.c.d (host bits must be 0)

length

Specifies the IP prefix length.

Values: 1 to 32

pool-name: Specifies the pool name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is sample output for this command.

Sample Output

*A:SR12_PPPOE>show>router>nat# show router Base nat lsn-blocks 
===============================================================================
Large-Scale NAT blocks for Base
===============================================================================
10.0.0.5 [1024..1527]
Pool                                  : privpool
Policy                                : priv-nat-policy
Started                               : 2012/01/28 19:10:17
Inside router                         : vprn100
Inside IP address                     : 2001:db8:470:1F00:FFFF:189
-------------------------------------------------------------------------------
Number of blocks: 1
===============================================================================
A:SR12_PPPOE#

lsp

Syntax

lsp [lsp-name] [status {up | down}] [detail]

lsp [lsp-name] path [path-name] [type {working | protect}] [detail]

lsp [lsp-name] [status {up | down}] to ip-address [detail]

Context

[Tree] (show>router>gmpls lsp)

Full Context

show router gmpls lsp

Description

This command displays gLSP information.

Parameters

lsp-name: Specifies the identifier for the GMPLS LSP, up to 32 characters.

status

Specifies that the command displays only LSPs that are either operationally up or down.

Values

up — Displays only LSPs that are operationally up.

down — Displays only LSPs that are operationally down.

path-name: Specifies a unique case-sensitive name label for the LSP path. The path name can be an alphanumeric string, up to 32 characters.

type

Specifies that the command displays only paths that are either working or protect.

Values

working — Displays only working paths.

protect — Displays only protect paths.

ip-address

Specifies the system IP address of the far-end UNI-C router for the GMPLS LSP.

Values: a.b.c.d

detail: Keyword to request more detailed output.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp

Syntax

lsp [lsp-name] [detail]

Context

[Tree] (tools>dump>router>gmpls lsp)

Full Context

tools dump router gmpls lsp

Description

This command dumps information about LSPs. Configuring the lsp-name parameter only dumps information about the specified LSP.

Parameters

lsp-name: Specifies the LSP name, up to 32 characters.

detail: Keyword to output information in greater detail.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of LSP information.

Sample Output

*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1"
LSP "D1",  LspIndex: 1,  Type: GMPLS-UNI,  AdminState: UP, OperState: UP, Flags: 0x0
Total LSP Count: 1
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1" detail
=================================================================================
LSP "D1",  LspIndex: 1
  Type: GMPLS-UNI,  AdminState: UP,  OperState: UP, Flags: 0x0
  LastChange: 02/04/2015 23:30:34
  TimeSinceLastOperChange: 0d 15:07:19
  NumWorkingPaths: 1,  NumProtectPaths: 0
  NumWorkingPathsUp: 1,  NumProtectPathsUp: 0
 
----------------------------------------------------------------------------------
LspPath  PathIndex: 2,  Type: Working
  AdminState: UP,  OperState:Up,  Flags: 0x0
  LastChange: 02/04/2015 23:30:34
  TimeSinceLastOperChange: 0d 15:07:19
  LspId: 296,  SessionName: D1::2
  CurrState: LSP_PATH_UP,  PrevState: LSP_PATH_INIT
  RetryCount: 107,  FailNode: 0.0.0.0,  FailCode: none
  Peer: 0.0.0.0
  PSB: vrId: 1 Session (To: 192.0.2.02 - 1 - 192.0.2.01), Sender (192.0.2.01 - 296)
  Actual Hops:
    Hop 1 : Unnumbered RouterId 192.0.2.01, InterfaceId 1010702
            UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
    Hop 2 : Unnumbered RouterId 10.27.255.213, InterfaceId 1010702
            UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
            SRLG List  27     
    Hop 3 : Unnumbered RouterId 10.27.255.213, InterfaceId 13000
            UpStreamLabel 0, DnStreamLabel 101070230, Flags 0x0
            SRLG List  4      
    Hop 4 : Unnumbered RouterId 10.27.255.219, InterfaceId 13001
            UpStreamLabel 101070230, DnStreamLabel 0, Flags 0x0
    Hop 5 : Unnumbered RouterId 10.27.255.219, InterfaceId 1010702
            UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
            SRLG List  27     
    Hop 6 : Unnumbered RouterId 192.0.2.02, InterfaceId 1010702
            UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
=================================================================================
Total LSP Count: 1

lsp

Syntax

lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]

lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]

lsp count

lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]

lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]

lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]

lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]

Context

[Tree] (show>router>mpls lsp)

Full Context

show router mpls lsp

Description

This command displays LSP details.

Parameters

lsp-name: Specifies the name of the LSP used in the path, up to 64 characters.

status up: Displays an LSP that is operationally up.

status down: Displays an LSP that is operationally down.

from ip-address: Displays the IP address of the ingress router for the LSP.

to ip-address: Displays the IP address of the egress router for the LSP.

detail: Displays detailed information.

auto-lsp all: Displays all the auto LSP types.

auto-lsp mesh-p2p: Displays the mesh-p2p auto LSP types.

auto-lsp one-hop-p2p: Displays the one-hop-p2p auto LSP types.

transit: Displays the number of static LSPs that transit through the router.

terminate: Displays the number of static LSPs that terminate at the router.

count: Displays the total number of LSPs.

path-name: Specifies the LSP path name.

activepath: Displays the present path being used to forward traffic.

mbb: Displays make-before-break (MBB) information.

Platforms

All

Output

The following output is an example of MPLS LSP information.

MPLS LSP Output Fields and LSP Detail Output Fields describe the MPLS LSP output fields.

Sample Output

# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name         : lsp_1
Path LSP ID      : 38400
From             : 10.10.1.1            To                   : 10.10.1.2
Admin State      : Up                   Oper State           : Down
Path Name        : 500                  Path Type            : Primary
Path Admin       : Up                   Path Oper            : Down
Out Interface    : n/a                  Out Label            : n/a
Path Up Time     : 0d 00:00:00          Path Down Time       : 0d 00:00:43
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 2                    Next Retry In        : 19 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : FALSE                BFD failure-action   : down
 
Adspec           : Disabled             Oper Adspec          : N/A
CSPF             : Disabled             Oper CSPF            : N/A
Least Fill       : Disabled             Oper LeastFill       : N/A
FRR              : Disabled             Oper FRR             : N/A
Prop Adm Grp     : Disabled             Oper Prop AG         : N/A
Inter-area       : N/A
 
Neg MTU          : 0                    Oper MTU             : N/A
Bandwidth        : No Reservation       Oper Bw              : N/A
Hop Limit        : 255                  Oper HopLimit        : N/A
Record Route     : Record               Oper Rec Route       : N/A
Record Label     : No Record            Oper Rec Label       : N/A
Setup Priority   : 7                    Oper Setup Priority  : N/A
Hold Priority    : 7                    Oper Hold Priority   : N/A
Class Type       : 7                    Oper CT              : N/A
Backup CT        : 5
MainCT Retry     : 500
    Rem          :
MainCT Retry     : 500
    Limit        :
Include Grps     :                      Oper InclGrps        :
None                                           N/A
Exclude Grps     :                      Oper ExclGrps        :
None                                           N/A
 
Adaptive         : Enabled              Oper Metric          : N/A
Preference       : n/a
Path Trans       : 0                    CSPF Queries         : 0
Failure Code     : noResourcesAvailable
Failure Node     : 10.1.255.255
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    No Hops Specified
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : N/A
===============================================================================


# show router mpls lsp "1" path detail 
=======================================================================
MPLS LSP 1 Path  (Detail)
=======================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
    S - Strict                        L - Loose
    A - ABR
=======================================================================
-----------------------------------------------------------------------
LSP 1 Path 1
-----------------------------------------------------------------------
LSP Name    : 1                                  Path LSP ID : 30208
From        : 10.20.1.1                          To          : 10.20.1.6
Adm State   : Up                                 Oper State  : Up
Path Name   : 1                                  Path Type   : Primary
Path Admin  : Up                                 Path Oper   : Up
OutInterface: 1/1/1                              Out Label   : 131071
Path Up Time: 0d 00:00:05                        Path Dn Time: 0d 00:00:00
Retry Limit : 0                                  Retry Timer : 30 sec
RetryAttempt: 0                                  NextRetryIn : 0 sec 
 
Adspec      : Disabled                           Oper Adspec : Disabled
CSPF        : Enabled                            Oper CSPF   : Enabled
Least Fill  : Disabled                           Oper LeastF*: Disabled
FRR         : Enabled                            Oper FRR    : Enabled
FRR NodePro*: Enabled                            Oper FRR NP : Enabled
FR Hop Limit: 16                                 Oper FRHopL*: 16
FR Prop Adm*: Disabled                           Oper FRProp*: Disabled
Prop Adm Grp: Disabled                           Oper PropAG : Disabled
Inter-area  : False                              
 
Neg MTU     : 1496                               Oper MTU    : 1496
Bandwidth   : No Reservation                     Oper Bw     : 0 Mbps
Hop Limit   : 255                                Oper HopLim*: 255
Record Route: Record                             Oper RecRou*: Record
Record Label: Record                             Oper RecLab*: Record
SetupPriori*: 7                                  Oper SetupP*: 7
Hold Priori*: 0                                  Oper HoldPr*: 0
Class Type  : 0                                  Oper CT     : 0
Backup CT   : None                               
MainCT Retry: n/a                                
    Rem     :                                    
MainCT Retry: 0                                  
    Limit   :                                    
Include Grps:                                    Oper InclGr*:  
None                                           None
Exclude Grps:                                    Oper ExclGr*:  
None                                           None

Adaptive    : Enabled                            Oper Metric : 3000
Preference  : n/a                                
Path Trans  : 1                                  CSPF Queries: 1
Failure Code: noError                            Failure Node: n/a
ExplicitHops:                                    
    No Hops Specified
Actual Hops :                                    
    10.20.1.1, If Index : 2 @ n                  Record Label        : N/A
-> 10.20.1.2, If Index : 2 @ n                  Record Label        : 131071
-> 10.20.1.4, If Index : 2                      Record Label        : 131071
-> 10.20.1.6, If Index : 2                      Record Label        : 131071
ComputedHops:                                    
    10.20.1.1, If Index : 2(S)    
 -> 10.20.1.2, If Index : 2(S)    
 -> 10.20.1.4, If Index : 2(S)    
 -> 10.20.1.6, If Index : 2(S)    
ResigEligib*: False                              
LastResignal: n/a                                CSPF Metric : 3000
=======================================================================
* indicates that the corresponding row element may have been truncated.

# show router mpls lsp detail 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name   : C_F_1
LSP Type        : RegularLsp                LSP Tunnel ID        : 1
LSP Index       : 1                         TTM Tunnel Id        : 1
From            : 10.20.1.3
To              : 10.20.1.6
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:07:27               LSP Down Time        : 0d 00:00:00
Transitions     : 3                         Path Changes         : 3
Retry Limit     : 0                         Retry Timer          : 20 sec
Signaling       : RSVP                      Resv. Style          : SE
Hop Limit       : 255                       Negotiated MTU       : 1500
Adaptive        : Enabled                   ClassType            : 0
FastReroute     : Disabled                  Oper FR              : Disabled
PathCompMethod  : pce                       ADSPEC               : Enabled
FallbkPathComp  : local-cspf                
Metric          : N/A                       Metric Type          : igp
Load Bal Wt     : N/A                       ClassForwarding      : Disabled
Include Grps    :                           Exclude Grps         : 
None                                           None
Least Fill      : Disabled                  
BFD Template    : None                      BFD Ping Intvl       : 60
BFD Enable      : False                     BFD Failure-action   : None
WaitForUpTimer  : 4                         
 
Revert Timer    : Disabled                  Next Revert In       : N/A
Entropy Label   : Enabled+                  Oper Entropy Label   : Enabled
Negotiated EL   : Disabled                  
Auto BW         : Disabled                  
LdpOverRsvp     : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 100                       
Prop Adm Grp    : Disabled                  
PCE Report      : Enabled                   Binding SID          : 1234                   
PCE Control     : Enabled                   
Path Profile    : None                      
Admin Tags      : None                      
Lsp Self Ping   : Disabled+                 Self Ping Timeouts   : 0
SelfPingOAMFail*: 0                         
 
Primary(a)      : C_F_1
                                            Up Time              : 0d 00:07:28
Bandwidth       : 0 Mbps                    
===============================================================================
* indicates that the corresponding row element may have been truncated.

# show router mpls lsp path detail 
===============================================================================
MPLS LSP  Path  (Detail)
===============================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
    S - Strict                        L - Loose
    A - ABR                           + - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP C_F_1
Path C_F_1
-------------------------------------------------------------------------------
LSP Name    : C_F_1
From             : 10.20.1.3               
To               : 10.20.1.6               
Admin State      : Up                      Oper State        : Up
Path Name   : C_F_1
Path LSP ID      : 49666                   Path Type         : Primary
Path Admin       : Up                      Path Oper         : Up
Out Interface    : 1/1/1                   Out Label         : 524248
Path Up Time     : 0d 00:07:18             Path Down Time    : 0d 00:00:00
Retry Limit      : 0                       Retry Timer       : 20 sec
Retry Attempt    : 0                       Next Retry In     : 0 sec
 
BFD Configuration and State
Template         : None                    Ping Interval     : 60
Enable           : False                   State             : notApplicable
WaitForUpTimer   : 4 sec                   OperWaitForUpTimer: N/A
WaitForUpTmLeft  : 0 sec                   
 
Adspec           : Enabled                 Oper Adspec       : Enabled
PathCompMethod   : pce                     OperPathCompMethod: pce
MetricType       : igp                     Oper MetricType   : igp
Least Fill       : Disabled                Oper LeastFill    : Disabled
FRR              : Disabled                Oper FRR          : Disabled
Propagate Adm Grp: Disabled                Oper Prop Adm Grp : Disabled
Inter-area       : N/A                     
 
PCE Report       : Enabled                 Oper PCE Report   : Enabled
PCE Control      : Enabled                 Oper PCE Control  : Enabled
PCE Update ID    : 0                       
 
Neg MTU          : 1500                    Oper MTU          : 1500
Bandwidth        : No Reservation          Oper Bandwidth    : 0 Mbps
Hop Limit        : 255                     Oper HopLimit     : 255
Record Route     : Record                  Oper Record Route : Record
Record Label     : Record                  Oper Record Label : Record
Setup Priority   : 7                       Oper SetupPriority: 7
Hold Priority    : 0                       Oper HoldPriority : 0
Class Type       : 0                       Oper CT           : 0
Backup CT        : None                    
MainCT Retry     : n/a                     
    Rem          :                         
MainCT Retry     : 0                       
    Limit        :                         
Include Groups   :                         Oper IncludeGroups: 
None                                           None
Exclude Groups   :                         Oper ExcludeGroups: 
None                                           None
 
Adaptive         : Enabled                 Oper Metric       : 100
Preference       : n/a                     
Path Trans       : 3                       CSPF Queries      : 0
Failure Code     : noError
Failure Node : n/a
Explicit Hops    :                         
    No Hops Specified
Actual Hops      :                         
    10.10.2.3(10.20.1.3)                         Record Label        : N/A
 -> 10.10.2.1(10.20.1.1)                         Record Label        : 524248
 -> 10.10.1.2(10.20.1.2)                         Record Label        : 524246
 -> 10.10.4.4(10.20.1.4)                         Record Label        : 524246
 -> 10.10.9.6(10.20.1.6)                         Record Label        : 524248
Computed Hops    :                         
    10.10.2.1(S)      
 -> 10.10.1.2(S)      
 -> 10.10.4.4(S)      
 -> 10.10.9.6(S)      
Resignal Eligible: False                   
Last Resignal    : n/a                     CSPF Metric       : 100
===============================================================================

# show router mpls lsp "lspE" detail 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : lspE
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1005
LSP Index   : 1005                             TTM Tunnel Id  : 1005
From        : 10.20.1.3                        To             : 10.20.1.5
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:19:23                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 20 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : N/A                             
Load Bal Wt : N/A                              ClassForwarding: Disabled
Include Grps:                                  Exclude Grps   : 
None                                           None
Least Fill  : Disabled                        
BFD Template: None                             BFD Ping Intvl : 60
BFD Enable  : FALSE                            BFD failure-ac*: down
 
Revert Timer: Disabled                         Next Revert In : N/A
EntropyLbl  : Inherited                        Oper EntropyLbl: Enabled
Auto BW     : Disabled                        
LdpOverRsvp : Enabled                         
VprnAutoBind: Enabled                         
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                         
Oper Metric : 16777215                        
Prop Adm Grp: Disabled                        
 
Primary(a)  : E1                               Up Time        : 0d 00:19:32
Bandwidth   : 0 Mbps                          
Standby     : E2                               Down Time      : 0d 00:19:46
Bandwidth   : 0 Mbps                          
===============================================================================

# show router mpls lsp path
===============================================================================
MPLS LSP  Path  (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - loose
===============================================================================
ExplicitHops:
    10.20.1.3(L)       -> 10.20.1.4(S)
Actual Hops :
    10.10.1.1(10.20.1.1)                         Record Label    : N/A
 -> 10.10.1.2(10.20.1.2)                         Record Label    : 131071
 -> 10.10.5.3(10.20.1.3)                         Record Label    : 131071
 -> 10.10.7.4(10.20.1.4)                         Record Label    : 131071
 -> 10.10.8.5(10.20.1.5)                         Record Label    : 131071
ComputedHops:
    10.10.1.1(S)       -> 10.10.1.2(S)       -> 10.10.5.3(S)
 -> 10.20.1.4(S)       -> 10.20.1.5(L)
===============================================================================


# show router mpls lsp
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name                           To                Fastfail     Adm   Opr
                                                     Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf                 10.30.1.1          No           Up    Up
to_10_30_1_2_cspf                 10.30.1.2          No           Up    Dwn
to_10_30_1_3_cspf                 10.30.1.3          No           Up    Up
to_10_30_1_4_cspf                 10.30.1.4          No           Up    Dwn
to_10_30_1_5_cspf                 10.30.1.5          No           Up    Up
to_10_30_1_6_cspf                 10.30.1.6          No           Up    Dwn
to_10_30_1_110_cspf               10.30.1.110        No           Up    Up
to_10_8_100_15_cspf               10.8.100.15        No           Up    Dwn
to_10_20_1_20_cspf                10.20.1.20         No           Up    Up
to_10_20_1_22_cspf                10.20.1.22         No           Up    Up
to_10_100_1_1_cspf                10.100.1.1         No           Up    Dwn
to_10_30_1_1_cspf_2               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_3               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_4               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_5               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_6               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_7               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_8               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_9               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_10              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_11              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_12              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_13              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_14              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_15              10.30.1.1          No           Up    Up
...
-------------------------------------------------------------------------------
LSPs : 201
===============================================================================
*A:SRU4>config>router>mpls#

#   show router mpls lsp "to_10_30_1_1_cspf"
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name                           To                  Fastfail     Adm   Opr
                                                       Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf                 10.30.1.1          No           Up    Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:SRU4>config>router>mpls#


# show router mpls lsp "to_10_30_1_1_cspf" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : to_10_30_1_1_cspf
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1
From        : 10.30.1.4
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 01:47:02                      LSP Down Time  : 0d 00:00:00
Transitions : 11                               Path Changes   : 11
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : 0                                Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled
Oper Metric : 1001

Primary(a)  : to_10_30_1_1                    Up Time        : 0d 01:47:02
Bandwidth   : 0 Mbps
===============================================================================
*A:SRU4>config>router>mpls#


# show router mpls lsp detail to 10.30.1.2
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : 1
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1
From        : 0.0.0.0
Adm State   : Down                             Oper State     : Down
LSP Up Time : 0d 00:00:00                      LSP Down Time  : 0d 00:00:07
Transitions : 0                                Path Changes   : 0
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 0
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : 0
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled

Auto BW     : Enabled                          AB OpState     : Down
Auto BW Min : 0 Mbps                           Auto BW Max    : 100000 Mbps
AB Up Thresh: 5 percent                        AB Down Thresh : 5 percent
AB Up BW    : 0 Mbps                           AB Down BW     : 0 Mbps
AB Curr BW  : 0 Mbps                           AB Samp Intv   : 0
AB Adj Mul  : 288+                             AB Samp Mul    : 1+
AB Adj Time : 0 Mins                           AB Samp Time   : 0 Mins
AB Adj Cnt  : 0                                AB Samp Cnt    : 0
AB Last Adj : n/a                              AB Next Adj    : 0 Mins
ABMaxAvgRt  : 0 Mbps                           AB Lst AvgRt   : 0 Mbps
AB Ovfl Lmt : 0                                AB Ovfl Cnt    : 0
ABOvflThres : 0 percent                        AB Ovfl BW     : 0
AB Adj Cause: none                             AB Monitor BW  : False
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled
Oper Metric : 65535

+ indicates inherited values
===============================================================================
*A:SRU4>config>router>mpls#

# show router mpls lsp count 
 
===============================================================================
MPLS LSP Count
===============================================================================
                          Originate         Transit           Terminate
-------------------------------------------------------------------------------
Static LSPs               0                 0                 0
Dynamic LSPs              155               0                 171
P2P LSPs                  143               N/A               N/A
Detour LSPs               0                 0                 0
P2MP S2Ls                 0                 0                 0
MPLS-TP LSPs              0                 0                 0
Mesh-P2P LSPs             0                 N/A               N/A
One Hop-P2P LSPs          0                 N/A               N/A
SR-TE LSPs                400               N/A               N/A
Mesh-P2P SR-TE LSPs       0                 N/A               N/A
One Hop-P2P SR-TE LSPs    0                 N/A               N/A
PCE Init SR-TE LSPs       0                 N/A               N/A
===============================================================================

# show router mpls lsp path mbb
===============================================================================
MPLS LSP Paths
===============================================================================
-------------------------------------------------------------------------------
LSP to_10_30_1_1_cspf Path to_10_30_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 1001
Last MBB    :
 MBB Type   : TimerBasedResignal                 MBB State   : Fail
 Ended At   : 03/04/2010 09:23:58                Old Metric  : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_2_cspf Path to_10_30_1_2
-------------------------------------------------------------------------------
LastResignal: 03/04/2010 09:23:58                CSPF Metric : 65535
-------------------------------------------------------------------------------
LSP to_10_30_1_3_cspf Path to_10_30_1_3
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 1001
Last MBB    :
 MBB Type   : TimerBasedResignal                 MBB State   : Fail
 Ended At   : 03/04/2010 09:23:58                Old Metric  : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_4_cspf Path to_10_30_1_4
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_5_cspf Path to_10_30_1_5
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_19 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_20 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
===============================================================================
*A:SRU4>config>router>mpls#


# show router mpls lsp transit
===============================================================================
MPLS LSPs (Transit)
===============================================================================
Legend :  @ - Active Detour
===============================================================================
From            To              In I/F   Out I/F  State LSP Name
-------------------------------------------------------------------------------
10.30.1.5      10.20.1.22      3/2/1    3/2/7    Up    to_10_20_1_22_cspf::to*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_3::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_4::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_2::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_20:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_18:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_19:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_17:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_16:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_15:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_13:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_14:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_12:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_10:*
...
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf_6::*
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf::to*
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf_9::*
-------------------------------------------------------------------------------
LSPs : 520
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#

# show router mpls lsp terminate
===============================================================================
MPLS LSPs (Terminate)
===============================================================================
Legend :  @ - Active Detour
===============================================================================
From            To              In I/F   Out I/F  State LSP Name
-------------------------------------------------------------------------------
10.30.1.5      10.30.1.4      3/2/1    n/a      Up    b4-1::b4-1
10.30.1.5      10.30.1.4      3/2/7    n/a      Up    gsr::gsr
10.20.1.22     10.30.1.4      3/2/7    n/a      Up    gsr2_t10
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    1::2
10.30.1.6      10.30.1.4      3/2/3:3  n/a      Up    1::stby
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    2::2
10.30.1.6      10.30.1.4      3/2/3:6  n/a      Up    2::stby
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    3::2
10.30.1.6      10.30.1.4      3/2/3:6  n/a      Up    3::stby
...
10.30.1.3      10.30.1.4      aps-1    n/a      Up    to_10_30_1_4_cspf_20:*
10.30.1.3      10.30.1.4      aps-1    n/a      Up    to_10_30_1_4_cspf_4::*
-------------------------------------------------------------------------------
LSPs : 1603
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#


# show router mpls lsp terminate detail
===============================================================================
MPLS LSPs (Terminate) (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP b4-1::b4-1
-------------------------------------------------------------------------------
From                 : 10.30.1.5             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : 3/2/1                 In Label      : 131071
Previous Hop         : 10.100.30.20
-------------------------------------------------------------------------------
LSP gsr::gsr
-------------------------------------------------------------------------------
From                 : 10.30.1.5             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : 3/2/7                 In Label      : 128547
Previous Hop         : 192.168.60.2
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
From                 : 10.30.1.3             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : aps-1                 In Label      : 130409
Previous Hop         : 192.168.0.3
===============================================================================
*A:SRU4>config>router>mpls#

# show router mpls lsp lsp1 detail  
 
===============================================================================
MPLS LSPs (Originating) (Detail) 
===============================================================================
-------------------------------------------------------------------------------
Type : Originating  
-------------------------------------------------------------------------------
LSP Name        : lsp1
LSP Type        : RegularLsp                LSP Tunnel ID        : 1
LSP Index       : 1                         TTM Tunnel Id        : 1
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:00:38               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 20 sec
Signaling       : RSVP                      Resv. Style          : SE
Hop Limit       : 255                       Negotiated MTU       : 1500
Adaptive        : Enabled                   ClassType            : 0
FastReroute     : Disabled                  Oper FR              : Disabled
CSPF            : Enabled                   ADSPEC               : Disabled
Metric          : N/A                       Use TE metric        : Disabled
Load Bal Wt     : N/A                       ClassForwarding      : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
Least Fill      : Disabled                  
BFD Template    : bfdTemp1                  BFD Ping Intvl       : 60
BFD Enable      : True                      BFD Failure-action   : Failover
Revert Timer    : Disabled                  Next Revert In       : N/A
Entropy Label   : Inherited                 Oper Entropy Label   : Enabled
Negotiated EL   : Disabled                  
Auto BW         : Disabled                  
LdpOverRsvp     : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 2000                      
Prop Adm Grp    : Disabled                  
PCE Report      : Disabled+                 Binding SID          : 1234
PCE Compute     : Disabled                  PCE Control          : Disabled
Path Profile    : None                      
 
Primary(a)      : path1                     Up Time              : 0d 00:00:40
Bandwidth       : 0 Mbps

# show router mpls lsp "N1.N2.3" detail 

===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : N1.N2.3
LSP Type    : RegularLsp                       LSP Tunnel ID  : 132
From        : 192.168.0.1                      To             : 192.168.0.2
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:01:07                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 2
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : 9                                Use TE metric  : Disabled
Load Balanc*: 100                              
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Revert Timer: Disabled                         Next Revert In : N/A
Auto BW     : Disabled                         
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                          
Oper Metric : 9                                
Prop Adm Grp: Disabled                         
 
Primary(a)  : path.N1.N2.3                     Up Time        : 0d 00:01:04
Bandwidth   : 0 Mbps                           
Secondary   : path.N1.N2.4                     Down Time      : 0d 00:01:00
Bandwidth   : 0 Mbps                           
===============================================================================

# show router mpls lsp "lsp_1" path "500" detail
 
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name         : lsp_1
Path LSP ID      : 38400
From             : 10.10.1.1            To                   : 10.10.1.2
Admin State      : Up                   Oper State           : Down
Path Name        : 500                  Path Type            : Primary
Path Admin       : Up                   Path Oper            : Down
Out Interface    : n/a                  Out Label            : n/a
Path Up Time     : 0d 00:00:00          Path Down Time       : 0d 00:00:43
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 2                    Next Retry In        : 19 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : FALSE
 
Adspec           : Disabled             Oper Adspec          : N/A
CSPF             : Disabled             Oper CSPF            : N/A
Least Fill       : Disabled             Oper LeastFill       : N/A
FRR              : Disabled             Oper FRR             : N/A
Prop Adm Grp     : Disabled             Oper Prop AG         : N/A
Inter-area       : N/A
 
Neg MTU          : 0                    Oper MTU             : N/A
Bandwidth        : No Reservation       Oper Bw              : N/A
Hop Limit        : 255                  Oper HopLimit        : N/A
Record Route     : Record               Oper Rec Route       : N/A
Record Label     : No Record            Oper Rec Label       : N/A
Setup Priority   : 7                    Oper Setup Priority  : N/A
Hold Priority    : 7                    Oper Hold Priority   : N/A
Class Type       : 7                    Oper CT              : N/A
Backup CT        : 5
MainCT Retry     : 500
    Rem          :
MainCT Retry     : 500
    Limit        :
Include Grps     :                      Oper InclGrps        :
None                                           N/A
Exclude Grps     :                      Oper ExclGrps        :
None                                           N/A
 
Adaptive         : Enabled              Oper Metric          : N/A
Preference       : n/a
Path Trans       : 0                    CSPF Queries         : 0
Failure Code     : noResourcesAvailable
Failure Node     : 10.1.255.255
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    No Hops Specified
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : N/A
===============================================================================


# show router mpls lsp path detail tof1 
==============================================================================
MPLS LSP tof1 Path  (Detail)
==============================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
------------------------------------------------------------------------------
LSP tof1 Path 1
------------------------------------------------------------------------------
LSP Name    : tof1                               Path LSP ID : 4706            
From        : 10.20.1.2                          To          : 10.20.1.4       
Adm State   : Up                                 Oper State  : Up              
Path Name   : 1                                  Path Type   : Primary         
Path Admin  : Up                                 Path Oper   : Up              
OutInterface: 1/1/2:5                            Out Label   : 124809          
Path Up Time: 0d 00:01:16                        Path Dn Time: 0d 00:00:00     
Retry Limit : 0                                  Retry Timer : 20 sec          
RetryAttempt: 0                                  NextRetryIn : 0 sec           
SetupPriori*: 4                                  Hold Priori*: 4               
Bandwidth   : 1 Mbps                             Oper Bw     : 1 Mbps          
Hop Limit   : 255                                Class Type  : 5               
Record Route: Record                             Record Label: Record          
Oper MTU    : 1492                               Neg MTU     : 1492            
Adaptive    : Enabled                            Oper Metric : 1000            
Include Grps:                                    Exclude Grps:                 
None                                           None
Path Trans  : 2                                  CSPF Queries: 1               
Failure Code: noError                            Failure Node: n/a             
ExplicitHops:                                                                  
    10.20.1.4      
Actual Hops :                                                                  
    10.10.105.2(10.20.1.2) @ s                   Record Label    : N/A
 -> 10.10.105.4(10.20.1.4)                       Record Label    : 124809
ComputedHops:                                                                  
    10.10.105.2     -> 10.10.105.4    
ResigEligib*: False                                                            
LastResignal: n/a                                CSPF Metric : 1000            
In Prog MBB :
 MBB Type   : SoftPreemption                     NextRetryIn : 19 sec          
 Started At : 12/08/2008 22:21:11                RetryAttempt: 0               
 FailureCode: noError                            Failure Node: n/a             
==============================================================================
*A:Dut-B#

# show router mpls lsp "LSP-PE-2-PE-4" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : LSP-PE-2-PE-4
LSP Type    : RegularLsp                       LSP Tunnel ID  : 4
LSP Index   : 4                                TTM Tunnel Id  : 4
From        : 192.0.2.104                      To             : 192.0.2.102
Adm State   : Up                               Oper State     : Up
LSP Up Time : 17d 02:16:53                     LSP Down Time  : 0d 00:00:00
Transitions : 3                                Path Changes   : 3
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 8690
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : N/A
Load Bal Wt : N/A                              ClassForwarding: Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
BFD Template: None                             BFD Ping Intvl : 60
BFD Enable  : False

Revert Timer: Disabled                         Next Revert In : N/A
EntropyLbl  : Inherited
Auto BW     : Enabled                          AB OpState     : Down
Auto BW Min : 0 Mbps                           Auto BW Max    : 100000 Mbps
AB Up Thresh: 5 percent                        AB Down Thresh : 5 percent
AB Up BW    : 0 Mbps                           AB Down BW     : 0 Mbps
AB Curr BW  : 0 Mbps                           AB Samp Intv   : 0 Mins
AB Adj Mul  : 288+                             AB Samp Mul    : 1+
AB Adj Time : 0 Mins                           AB Samp Time   : 0 Mins
AB Adj Cnt  : 0                                AB Samp Cnt    : 0
AB Last Adj : n/a                              AB Next Adj    : 0 Mins
ABMaxAvgRt  : 0 Mbps                           AB Lst AvgRt   : 0 Mbps
AB Ovfl Lmt : 0                                AB Ovfl Cnt    : 0
ABOvflThres : 0 percent                        AB Ovfl BW     : 0 Mbps
AB UndflLmt : 0                                AB Undrfl Cnt  : 0
ABUndflThrs : 0 percent                        AB Undrfl BW   : 0 Mbps
ABMaxUndflBW: 0 Mbps
AB Adj Cause: none                             AB Monitor BW  : False
Be Weight   : 100 percent                      Af Weight      : 100 percent
L1 Weight   : 100 percent                      L2 Weight      : 100 percent
Nc Weight   : 100 percent                      Ef Weight      : 100 percent
H1 Weight   : 100 percent                      H2 Weight      : 100 percent
LdpOverRsvp : Enabled
VprnAutoBind: Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 1
Prop Adm Grp: Disabled

Primary(a)  : completely-loose-path            Up Time        : 17d 02:16:53
Bandwidth   : 0 Mbps
===============================================================================

# show router mpls lsp "From Reno to Atlanta RSVP-TE" path detail
===============================================================================
MPLS LSP From Reno to Atlanta RSVP-TE Path  (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path primary_empty
-------------------------------------------------------------------------------
LSP Name         : From Reno to Atlanta RSVP-TE
Path LSP ID      : 14382
From             : 192.168.48.194       To                   : 192.168.48.224
Admin State      : Up                   Oper State           : Up
Path Name        : primary_empty        Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Out Interface    : 1/1/1                Out Label            : 262094
Path Up Time     : 0d 00:00:22          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 0                    Next Retry In        : 0 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : False
Adspec           : Disabled             Oper Adspec          : Disabled
CSPF             : Enabled              Oper CSPF            : Enabled
Least Fill       : Disabled             Oper LeastFill       : Disabled
FRR              : Enabled              Oper FRR             : Enabled
FRR NodeProtect  : Disabled             Oper FRR NP          : Disabled
FR Hop Limit     : 16                   Oper FRHopLimit      : 16
FR Prop Admin Gr*: Disabled             Oper FRPropAdmGrp    : Disabled
Propogate Adm Grp: Disabled             Oper Prop Adm Grp    : Disabled
Inter-area       : False
PCE Updt ID      : 0
PCE Report       : Enabled              Oper PCE Report      : Enabled
PCE Control      : Enabled              Oper PCE Control     : Enabled
PCE Compute      : Enabled
Neg MTU          : 1496                 Oper MTU             : 1496
Bandwidth        : 10 Mbps              Oper Bandwidth       : 10 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Record Route     : Record               Oper Record Route    : Record
Record Label     : Record               Oper Record Label    : Record
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Class Type       : 0                    Oper CT              : 0
Backup CT        : None
MainCT Retry     : n/a
    Rem          :
MainCT Retry     : 0
    Limit        :
Include Groups   :                      Oper Include Groups  :
None                                           None
Exclude Groups   :                      Oper Exclude Groups  :
top                                            top
Adaptive         : Enabled              Oper Metric          : 40
Preference       : n/a
Path Trans       : 7                    CSPF Queries         : 7172
Failure Code     : noError
Failure Node     : n/a
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    10.202.5.194 (192.168.48.194) @              Record Label        : N/A
 -> 10.202.5.199 (192.168.48.199) @              Record Label        : 262094
 -> 192.168.48.185 (192.168.48.185)              Record Label        : 262111
 -> 10.0.5.185                                   Record Label        : 262111
 -> 192.168.48.223 (192.168.48.223)              Record Label        : 262121
 -> 10.0.7.223                                   Record Label        : 262121
 -> 192.168.48.224 (192.168.48.224)              Record Label        : 262116
 -> 10.101.4.224                                 Record Label        : 262116
Computed Hops    :
    10.202.5.199(S)
 -> 10.0.5.185(S)
 -> 10.0.7.223(S)
 -> 10.101.4.224(S)
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : 40
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path secondary_empty
-------------------------------------------------------------------------------
LSP Name         : From Reno to Atlanta RSVP-TE
Path LSP ID      : 14384
From             : 192.168.48.194       To                   : 192.168.48.224
Admin State      : Up                   Oper State           : Up
Path Name        : secondary_empty      Path Type            : Standby
Path Admin       : Up                   Path Oper            : Up
Out Interface    : 1/

CBF Info —To see CBF information of the LSP:

# show router mpls lsp "11-4" detail 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name        : 11-4
LSP Type        : RegularLsp                LSP Tunnel ID        : 83
LSP Index       : 83                        TTM Tunnel Id        : 83
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:15:33               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 30 sec
Signaling       : RSVP                      Resv. Style          : SE
Hop Limit       : 255                       Negotiated MTU       : 1500
Adaptive        : Enabled                   ClassType            : 0
FastReroute     : Disabled                  Oper FR              : Disabled
Egress Stats    : Enabled                   Egress Oper State    : N/A
CSPF            : Enabled                   ADSPEC               : Disabled
Metric          : N/A                       Use TE metric        : Disabled
Load Bal Wt     : N/A                       ClassForwarding      : Enabled
CBF FC          : None                      CBF Default LSP      : No
CBF Fwding Plcy : policy1
CBF Fwding Set  : 4                         
Include Grps    :                           Exclude Grps         :  
None                                           None
Least Fill      : Disabled                  
BFD Template    : None                      BFD Ping Intvl       : 60
BFD Enable      : False                     BFD Failure-action   : None
Revert Timer    : Disabled                  Next Revert In       : N/A
Entropy Label   : Enabled+                  Oper Entropy Label   : Enabled
Negotiated EL   : Disabled                  
Auto BW         : Disabled                  
LdpOverRsvp     : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 2000                      
Prop Adm Grp    : Disabled                  
PCE Report      : Disabled+                 Binding SID          : 1234
PCE Compute     : Disabled                  PCE Control          : Disabled
Path Profile    : None                      
 
Primary(a)      : 1                         Up Time              : 0d 00:15:33
Bandwidth       : 0 Mbps                    
===============================================================================

Table 31. MPLS LSP Output Fields
Label	Description
LSP Name	The name of the LSP used in the path.
To	The IP address of the egress router for the LSP.
Adm State	Down — The path is administratively disabled. Up — The path is administratively enabled.
Oper State	Down — The path is operationally down. Up — The path is operationally up.
LSPs	The total number of LSPs configured.
From	The IP address of the ingress router for the LSP.
LSP Up Time	The length of time the LSP has been operational.
Transitions	The number of transitions that have occurred for the LSP.
Retry Limit	The number of attempts that the software should make to re-establish the LSP after it has failed.
Signaling	Specifies the signaling style.
Hop Limit	The maximum number of hops that an LSP can traverse, including the ingress and egress routers.
Fast Reroute/FastFail Config	enabled — Fast reroute is enabled. In the event of a failure, traffic is immediately rerouted on the pre-computed detour LSP, thus minimizing packet loss. disabled — There is no detour LSP from each node on the primary path.
PathCompMethod	pce — PCE path computation method is configured. local-cspf — Local CSPF path computation method is configured.
Adspec/ ADSPEC	enabled — The LSP includes advertising data (ADSPEC) objects in RSVP messages. disabled — The LSP does not include advertising data (ADSPEC) objects in RSVP messages.
FallbkPathComp	none — No fallback method is configured. local-cspf — Local CSPF fallback is configured.
Primary	The preferred path for the LSP.
Secondary	The alternate path that the LSP uses if the primary path is not available.
Bandwidth	The amount of bandwidth in Mb/s reserved for the LSP path.
LSP Up Time	The total time in increments that the LSP path has been operational.
LSP Tunnel ID	The value which identifies the label switched path that is signaled for this entry.
To	The IP address of the egress router for the LSP.
LSP Down Time	The total time in increments that the LSP path has not been operational.
Path Changes	The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated.
Retry Timer	The time in s, for LSP re-establishment attempts after an LSP failure.
Resv Style	se — Specifies a shared reservation environment with a limited reservation scope. This reservation style creates a single reservation over a link that is shared by an explicit list of senders. ff — Specifies a shared reservation environment with an explicit reservation scope. Specifies an explicit list of senders and a distinct reservation for each of them.
Negotiated MTU	The size of the maximum transmission unit (MTU) that is negotiated during establishment of the LSP.
FR Hop Limit	The total number of hops a detour LSP can take before merging back onto the main LSP path.
LastResignalAttempt	Displays the system up time when the last attempt to resignal this LSP was made.
MBB Type	Displays an enumerated integer that specifies the type of make-before-break (MBB). If none displays then there is no MBB in progress or no last MBB.
MBB State	Displays the state of the most recent invocation of the make-before-break functionality.
End at	Displays the system up time when the last MBB ended.
Old Metric	Displays the cost of the traffic engineered path for the LSP path prior to MBB.
NextRetryIn	Displays the amount of time (in s) remaining, before the next attempt is made to retry the in-progress MBB.
RetryAttempt	Displays the number attempts for the MBB is in progress.
Failure Code	Displays the reason code for in-progress MBB failure. A value of none indicates that no failure has occurred. See "LSP Failure Codes” in the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide for more information.
Failure Node	Displays the IP address of the node in the LSP path at which the in-progress MBB failed. When no failure has occurred, this value is none.
Static LSPs	Displays the number of static LSPs.
Dynamic LSPs	Displays the number of dynamic RSVP LSPs.
P2P LSPs	Displays the number of P2P RSVP LSPs.
Detour LSPs	Displays the number of detour RSVP LSPs.
P2MP S2Ls	Displays the number of P2MP RSVP S2Ls.
MPLS-TP LSPs	Displays the number of MPLS-TP LSPs.
Mesh-P2P LSPs	Displays the number of Mesh-P2P RSVP LSPs.
One Hop-P2P LSPs	Displays the number of one hop P2P RSVP LSPs.
SR-TE LSPs	Displays the number of SR-TE LSPs.
Mesh-P2P SR-TE LSPs	Displays the number of Mesh-P2P SR-TE LSPs.
One Hop-P2P SR-TE LSPs	Displays the number of one hop SR-TE LSPs.
PCE Init SR-TE LSPs	Displays the number of PCE initiated SR-TE LSPs.

Table 32. LSP Detail Output Fields
Label	Description
Auto BW	Enabled — Auto-bandwidth adjustment is configured on this LSP.
AB OpState	Up – Auto-bandwidth is operationally enabled on this LSP Down – Auto-bandwidth is operationally disabled on this LSP
Auto BW Min	The minimum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).
Auto BW Max	The maximum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).
AB Up Thresh	The percent threshold for increasing LSP bandwidth.
AB Down Thresh	The percent threshold for decreasing LSP bandwidth.
AB Up BW	The absolute bandwidth threshold for increasing LSP bandwidth (in Mb/s).
AB Down BW	The absolute bandwidth threshold for decreasing LSP bandwidth (in Mb/s).
AB Coll Intv	The auto-bandwidth collection interval.
AB Adj Mul	The adjust-multiplier for this LSP (may be configured or inherited).
AB Samp Mul	The sample-multiplier for this LSP (may be configured or inherited).
AB Adj Time	The adjust-multiplier times the collection-interval (in minutes).
AB Sample Time	The sample-multiplier times the collection-interval (in minutes).
AB Adj Cnt	The adjust count (number of whole collection intervals since the start of the current adjust interval).
AB Samp Cnt	The sample count (number of whole collection intervals since the start of the current sample interval).
AB Last Adj	The system time of the last auto-bandwidth adjustment.
AB Next Adj	The approximate remaining time in the current adjust interval (adjust-multiplier – adjust count) times the collection interval (in min). This overstates the actual remaining time because the elapsed time in the current collection interval is not accounted for.
AB Adj Cause	The cause of the last auto-bandwidth adjustment: none – no adjustment has occurred manual adj-count overflow
AB Max AvgR*	The maximum average data rate in any sample interval of the current adjust interval.
AB Lst AvgR*	The average data rate measured in the sample interval that ended most recently.
AB Ovfl Lmt	The configured value of the auto-bandwidth overflow-limit.
AB Ovfl Cnt	The number of overflow samples since the last reset.
ABOvflThres	The percent threshold for declaring an overflow sample.
AB Ovfl BW	The absolute bandwidth threshold for declaring an overflow sample (in Mb/s).
AB Monitor BW	True – monitor bandwidth is enabled on the LSP. False – monitor bandwidth is not enabled on the LSP.
BFD Enable	The operational state of BFD on the LSP.
BFD failure-action	The failure action that is configured for the BFD LSP.
Lsp Self Ping	Enabled – LSP Self-ping on this RSVP LSP or RSVP LSPs (one-hop-p2p or mesh-p2p) using this LSP template is enabled. Disabled – LSP Self-ping on this RSVP LSP or RSVP LSPs (one-hop-p2p or mesh-p2p) using this LSP template is disabled. Inherited – inherits the value configured under config>router>mpls>lsp-self-ping>rsvp-te
OperPathCompMethod	Displays the path computation method in use (pce, local, or none).
Self ping timeouts	Specifies the count of the number of LSP Self-ping timeouts.

lsp

Syntax

lsp lsp-name

Context

[Tree] (clear>router>mpls lsp)

Full Context

clear router mpls lsp

Description

This command resets and restarts an LSP.

Parameters

lsp-name: Specifies the LSP to clear, up to 64 characters in length.

Platforms

All

lsp

Syntax

lsp [plsp-id plsp-id]

lsp lsp-type lsp-type[tunnel-id tunnel-id]

Context

[Tree] (tools>dump>router>pcep>pcc lsp)

Full Context

tools dump router pcep pcc lsp

Description

This command displays LSP information.

Parameters

plsp-id

Specifies the PLSP ID.

Values: 1 to 1048575

lsp-type

Specifies the LSP type.

Values: rsvp-p2p, rsvp-p2mp, seg-rt

tunnel-id

Specifies the tunnel ID.

Values: 1 to 1048575

Platforms

All

lsp-autobandwidth

Syntax

lsp-autobandwidth [lsp-name]

Context

[Tree] (clear>router>mpls lsp-autobandwidth)

Full Context

clear router mpls lsp-autobandwidth

Description

This command clears the following counters/timers, as follows:

The sample count is reset to zero, and the average data rate of the current sample interval is discarded.
The adjust count is reset to zero.
The maximum average data rate is zeroed.
The overflow count is zeroed.

Parameters

lsp-name: Specifies the LSP to clear, up to 64 characters.

Platforms

All

lsp-bfd

Syntax

lsp-bfd [prefix-list-name [prefixes]]

Context

[Tree] (show>router>ldp lsp-bfd)

Full Context

show router ldp lsp-bfd

Description

This command displays information about prefixes that have LSP BFD configured.

Parameters

prefixes: Shows all FECs that the system has received a label mapping message for and which are also eligible for LSP BFD.

prefix-list-name: Specifies a prefix list for which to display prefix information, and whether BFD is active for each prefix.

Platforms

All

Output

The following output is an example of LSP BFD information for prefixes.

Sample Output

A:b1# show router ldp lsp-bfd "prefixListName_12345678901234567" 
==============================================================================
BFD on LDP LSP Configuration Detail
==============================================================================
Prefix List       : prefixListName_12345678901234567
Prefix Count      : 6                  
BFD Template      : bfdTemplateName
Source Address    : 2001:db8:f4f5:f6f7:f8f9:fafb:fcfd:feff
BFD Enable        : Yes                Failure Action    : none
LSP Ping Interval : 60 seconds         Priority          : 1
==============================================================================


A:b1# show router ldp lsp-bfd "prefixListName_12345678901234567" prefixes
=======================================================================
BFD on LDP LSP Prefix List "prefixListName_12345678901234567" (Enabled)
=======================================================================
Prefix                                       Operational State
-----------------------------------------------------------------------
10.2.3.4/32                                   BFD Disabled
10.2.3.5/32                                   Src Address Missing
10.2.3.6/32                                   Src Address Mismatch
10::2:0/128                                   Up
1::2:1/128                                    Down
2001:db8:1415:1617:1819:1a1b:1c1d:1e1f/128    Down (Trap Only)
-----------------------------------------------------------------------
No. of prefixes: 6
=======================================================================

lsp-bfd

Syntax

lsp-bfd

Context

[Tree] (tools>dump>router>ldp lsp-bfd)

[Tree] (tools>dump>router lsp-bfd)

Full Context

tools dump router ldp lsp-bfd

tools dump router lsp-bfd

Description

Commands in this context dump LSP BFD template information.

Platforms

All

lsp-bfd

Syntax

lsp-bfd

lsp-bfd ldp prefix ip-prefix/prefix-length

lsp-bfd local-bfd-discrim bfd-discriminator

lsp-bfd lsp-name lsp-name

Context

[Tree] (show>test-oam lsp-bfd)

Full Context

show test-oam lsp-bfd

Description

This command displays information about Bidirectional Forwarding Detection (BFD) sessions on LSPs.

Parameters

ip-prefix/prefix-length

Specifies an IP prefix for which to display BFD session information, and the length of the prefix.

Values

ipv4-prefix — a.b.c.d

ipv4-prefix-length — 0 to 32

ipv6-prefix — x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x — 0 to FFFF (hexadecimal)

d — 0 to 255 (decimal)

ipv6-prefix-length — 0 to 128

bfd-discriminator: Displays information about the unique local discriminator for this session.

lsp-name: Specifies information about the specified LSP name up to 64 characters in length.

Platforms

All

Output

The following output is an example of BFD LSP information.

Sample Output

A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : unknown
Replying Node           : (None)
Latest Return Code      : NoRtnCode (0)
Latest Return Subcode   : 3
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#


A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : active
Replying Node           : 192.168.242.243
Latest Return Code      : DSRtrMatchLabel (8)
Latest Return Subcode   : 4
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#


A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : inactive
Replying Node           : 2001:db8:f4f5:f6f7:f8f9:fafb:fcfd:feff
Latest Return Code      : DSRtrUnmatchLabel (10)
Latest Return Subcode   : 5
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#


A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : unknown
Replying Node           : (None)
Latest Return Code      : DSNoMac (16)
Latest Return Subcode   : 6
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#


*B:Dut-B# show test-oam lsp-bfd ldp prefix 10.20.1.3/32 
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on LSPs
-------------------------------------------------------------------------------
FEC Type                 : LDP          
Prefix                   : 10.20.1.3/32
Source Address           : 10.20.1.2
Replying Node            : 10.20.1.3
Latest Return Code       : EgressRtr (3)
Latest Return Subcode    : 1
Local BFD Discriminator  : 1            Remote BFD Discriminator : 43
LSP Ping Tx Interval (s) : 60           Bootstrap Retry Count    : 0
Tx LSP Ping Requests     : 2            Rx LSP Ping Replies      : 2
-------------------------------------------------------------------------------
No. of matching BFD on LSP sessions: 1
-------------------------------------------------------------------------------

lsp-bfd

Syntax

lsp-bfd

Context

[Tree] (tools>dump>test-oam lsp-bfd)

Full Context

tools dump test-oam lsp-bfd

Description

Commands in this context dump information about Bidirectional Forwarding Detection (BFD) sessions on LSPs.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp-db

Syntax

lsp-db [lsp-type lsp-type] [delegated-pce ip-address]

lsp-db [lsp-type lsp-type] from ip-address [ delegated-pce ip-address]

lsp-db [lsp-type lsp-type] lsp lsp-name [ delegated-pce ip-address]

lsp-db [lsp-type lsp-type] to ip-address [ delegated-pce ip-address]

lsp-db [lsp-type lsp-type] tunnel-id tunnel-id

Context

[Tree] (show>router>pcep>pcc lsp-db)

Full Context

show router pcep pcc lsp-db

Description

This command displays the PCEP LSP-DB information.

Parameters

lsp-type

Specifies the LSP type.

Values: rsvp-p2p, rsvp-p2mp, seg-rt

Note:
The LSP type, rsvp-p2mp, is not supported for PCE controlled or PCE initiated LSPs.

ip-address

Specifies the IP address.

Values: a.b.c.d

lsp-name: Specifies the LSP name, up to 80 characters.

tunnel-id

Specifies the tunnel ID.

Values: 1 to 65535

Platforms

All

Output

LSP-DB Output

LSP-DB Output Fields describes LSP-DB output fields.

Sample Output

*A:Dut-C>config>router>mpls# show router pcep pcc lsp-db 
===============================================================================
PCEP Path Computation Client (PCC) LSP Update Info
===============================================================================
PCEP-specific LSP ID: 1                 
LSP ID              : 11264             LSP Type            : pce-init-seg-rt
Tunnel ID           : 16386             Extended Tunnel Id  : 10.20.1.3
LSP Name            : intra_area__no_constraints
Source Address      : 10.20.1.3         Destination Address : 10.20.1.6
LSP Delegated       : True              Delegate PCE Address: 10.20.1.24
Oper Status         : active            
-------------------------------------------------------------------------------
PCEP-specific LSP ID: 2                 
LSP ID              : 3072              LSP Type            : pce-init-seg-rt
Tunnel ID           : 16387             Extended Tunnel Id  : 10.20.1.3
LSP Name            : intra_area_nonDefault
Source Address      : 10.20.1.3         Destination Address : 10.20.1.6
LSP Delegated       : True              Delegate PCE Address: 10.20.1.24
Oper Status         : active            
===============================================================================

Table 33. LSP-DB Output Fields
Label	Description
PCEP-specific LSP ID	Specifies the PCEP specific LSP ID.
LSP ID	Specifies the LSP ID.
LSP Type	rsvp-p2p — Indicates the LSP type is rsvp-p2p. rsvp-p2mp — Indicates the LSP type is rsvp-p2mp. seg-rt — Indicates the LSP type is seg-rt. pce-init-seg-rt — Indicates the LSP type is pce-init-seg-rt.
Tunnel ID	Specifies the tunnel ID.
Extended Tunnel Id	Specifies the extended tunnel ID.
LSP Name	Specifies the LSP name
Source Address	Specifies the source IP address.
Destination Address	Specifies the destination IP address.
LSP Delegated	True — Specifies that LSP Delegation is true. False— Specifies that LSP Delegation is false.
Delegate PCE Address	Specifies the delegate PCE IP address.
Oper Status	active — Specifies that the operational status is active. down — Specifies that the operational status is down.

lsp-egress-stats

Syntax

lsp-egress-stats

lsp-egress-stats lsp-name

Context

[Tree] (show>router>mpls lsp-egress-stats)

Full Context

show router mpls lsp-egress-stats

Description

This command displays MPLS LSP egress statistics information.

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

Platforms

All

Output

The following output is an example of MPLS LSP egress statistics information.

Sample Output

*A:Dut-C>config>router>mpls>lsp$ show router mpls lsp-egress-stats lsp "1" 
=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : 1
-----------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : Default
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================


*A:Dut-C# show router mpls lsp-egress-stats lsp "ipmsi-1-73728" 

=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : ipmsi-1-73728
-----------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : Default
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================

lsp-egress-stats

Syntax

lsp-egress-stats [active]

lsp-egress-stats lsp lsp-name

Context

[Tree] (show>router>mpls>mpls-tp lsp-egress-stats)

Full Context

show router mpls mpls-tp lsp-egress-stats

Description

This command displays MPLS-TP LSP egress statistics information.

Parameters

active: Displays statistics for all active LSPs.

lsp-name: Displays statistics for the specified LSP name, up to 64 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp-egress-stats

Syntax

lsp-egress-stats

lsp-egress-stats lsp-name

Context

[Tree] (clear>router>mpls lsp-egress-stats)

Full Context

clear router mpls lsp-egress-stats

Description

This command clears MPLS LSP egress statistics information.

Parameters

lsp-name: Specifies the LSP to clear, up to 64 characters.

Platforms

All

lsp-egress-stats

Syntax

lsp-egress-stats lsp lsp-name [interval seconds] [repeat repeat] [absolute | rate] [bits]

Context

[Tree] (monitor>router>mpls lsp-egress-stats)

Full Context

monitor router mpls lsp-egress-stats

Description

This command displays egress statistics for LSP interfaces at the configured interval until the configured count is reached.

Default

no lsp-egress-stats

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

repeat

Specifies how many times the command is repeated.

Values: 1 to 999

Default: 10

seconds

Specifies the interval for each display, in seconds.

Values: 3 to 60

Default: 10

absolute: Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

bits: Displays the output values in bits rather than in octets.

Platforms

All

Output

The following output is an example of LSP egress statistics information.

Sample Output

B:Dut-C-cpm2# monitor router mpls lsp-egress-stats lsp sample repeat 3 interval 10 
absolute 
===============================================================================
Monitor egress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name      : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : 5                      
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 551                    
InProf Octets : 0                       OutProf Octets: 560918                 
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 551                    
InProf Octets : 0                       OutProf Octets: 560918                 
FC AF
InProf Pkts   : 551                     OutProf Pkts  : 0                      
InProf Octets : 560918                  OutProf Octets: 0                      
FC L1
InProf Pkts   : 551                     OutProf Pkts  : 0                      
InProf Octets : 560918                  OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 551                    
InProf Octets : 0                       OutProf Octets: 560918                 
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 551                    
InProf Octets : 0                       OutProf Octets: 560918                 
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 551                    
InProf Octets : 0                       OutProf Octets: 560918                 
FC NC
InProf Pkts   : 551                     OutProf Pkts  : 0                      
InProf Octets : 560918                  OutProf Octets: 0 
-------------------------------------------------------------------------------
At time t = 10 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : 5                      
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 580                    
InProf Octets : 0                       OutProf Octets: 590440                 
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 580                    
InProf Octets : 0                       OutProf Octets: 590440                 
FC AF
InProf Pkts   : 580                     OutProf Pkts  : 0                      
InProf Octets : 590440                  OutProf Octets: 0                      
FC L1
InProf Pkts   : 580                     OutProf Pkts  : 0                      
InProf Octets : 590440                  OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 580                    
InProf Octets : 0                       OutProf Octets: 590440                 
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 580                    
InProf Octets : 0                       OutProf Octets: 590440                 
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 580                    
InProf Octets : 0                       OutProf Octets: 590440                 
FC NC
InProf Pkts   : 580                     OutProf Pkts  : 0                      
InProf Octets : 590440                  OutProf Octets: 0 
-------------------------------------------------------------------------------
At time t = 20 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : 5                      
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 609                    
InProf Octets : 0                       OutProf Octets: 619962                 
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 609                    
InProf Octets : 0                       OutProf Octets: 619962                 
FC AF
InProf Pkts   : 609                     OutProf Pkts  : 0                      
InProf Octets : 619962                  OutProf Octets: 0                      
FC L1
InProf Pkts   : 609                     OutProf Pkts  : 0                      
InProf Octets : 619962                  OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 609                    
InProf Octets : 0                       OutProf Octets: 619962                 
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 609                    
InProf Octets : 0                       OutProf Octets: 619962                 
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 609                    
InProf Octets : 0                       OutProf Octets: 619962                 
FC NC
InProf Pkts   : 609                     OutProf Pkts  : 0                      
InProf Octets : 619962                  OutProf Octets: 0 
-------------------------------------------------------------------------------
At time t = 30 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : 5                      
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 638                    
InProf Octets : 0                       OutProf Octets: 649484                 
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 638                    
InProf Octets : 0                       OutProf Octets: 649484                 
FC AF
InProf Pkts   : 638                     OutProf Pkts  : 0                      
InProf Octets : 649484                  OutProf Octets: 0                      
FC L1
InProf Pkts   : 638                     OutProf Pkts  : 0                      
InProf Octets : 649484                  OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 638                    
InProf Octets : 0                       OutProf Octets: 649484                 
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 638                    
InProf Octets : 0                       OutProf Octets: 649484                 
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 638                    
InProf Octets : 0                       OutProf Octets: 649484                 
FC NC
InProf Pkts   : 638                     OutProf Pkts  : 0                      
InProf Octets : 649484                  OutProf Octets: 0 
===============================================================================
B:Dut-C-cpm2#

lsp-history

Syntax

lsp-history [lsp-name]

Context

[Tree] (tools>dump>router>mpls lsp-history)

Full Context

tools dump router mpls lsp-history

Description

This command displays the recorded history of LSP events for all RSVP-TE LSPs if no LSP name is provided, or only the named LSP if an LSP name is provided.

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

Platforms

All

Output

The following example shows the LSP history output, and Output fields: tools dump router mpls lsp-history command describes the output fields.

tools dump router mpls lsp-history "C_F_5"

Sample Output

 
Info: lsp history recording is Enabled
=============================================================================
LSP: C_F_5
Hist Log [size=100]  Last Entry = 17 
=============================================================================
 17 2022/09/20 06:43:52.15 UTC LSP Up 
 16 2022/09/20 06:43:52.15 UTC Active path selected: C_F_sec
 15 2022/09/20 06:43:52.15 UTC Path Up: C_F_sec:47618
 14 2022/09/20 06:43:52.13 UTC CSPF Computation result Success: C_F_sec
 13 2022/09/20 06:43:52.13 UTC ERO: IPv4Prefix 10.10.5.3/32, Strict
 12 2022/09/20 06:43:52.13 UTC Active path removed: C_F_5
 11 2022/09/20 06:43:52.13 UTC LSP Down  Reason: Admin Down
 10 2022/09/20 06:43:52.13 UTC Path Down: C_F_5:pathAdminDown
  9 2022/09/20 06:42:58.57 UTC LSP-ID Created: 47618
  8 2022/09/20 06:39:49.53 UTC LSP Up 
  7 2022/09/20 06:39:49.53 UTC Active path selected: C_F_5
  6 2022/09/20 06:39:49.53 UTC Path Up: C_F_5:47616
  5 2022/09/20 06:39:49.53 UTC CSPF Computation result Success: C_F_5
  4 2022/09/20 06:39:49.53 UTC ERO: IPv4Prefix 10.10.11.3/32, Strict
  3 2022/09/20 06:39:32.18 UTC CSPF result Failure: No CspfRouteOwner
  2 2022/09/20 06:39:32.18 UTC LSP-ID Created: 47616
  1 2022/09/20 06:39:32.15 UTC Created: C_F_5

Table 34. Output fields: tools dump router mpls lsp-history command
Label	Description
Info	Specifies whether the LSP history event recording is enabled or disabled
LSP	Specifies the name of the LSP
Hist Log	Specifies the size of the history log
Last Entry	Specifies the number of entries

lsp-history

Syntax

lsp-history [lsp-name]

Context

[Tree] (clear>router>mpls lsp-history)

Full Context

clear router mpls lsp-history

Description

This command clears the recorded history of LSP events for all RSVP-TE LSPs if no LSP name is provided, or only the named LSP if the LSP name is provided.

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

Platforms

All

lsp-ingress-stats

Syntax

lsp-ingress-stats

lsp-ingress-stats ip-address lsp lsp-name

Context

[Tree] (show>router>mpls lsp-ingress-stats)

Full Context

show router mpls lsp-ingress-stats

Description

This command displays MPLS LSP ingress statistics information.

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

Platforms

All

Output

The following output is an example of MPLS LSP ingress statistics information.

Sample Output

*A:Dut-A# show router mpls lsp-ingress-stats lsp "1" sender 10.20.1.3 
=================================================================
MPLS LSP Ingress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : 1
Sender        : 10.20.1.3
-----------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================

*A:Dut-A# show router mpls lsp-ingress-stats lsp "ipmsi-1-73728" sender 10.20.1.3 
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name      : ipmsi-1-73728
Sender        : 10.20.1.3                      
-----------------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=======================================================================


*A:Dut-A>config>router>mpls>ingr-stats# show router mpls lsp-ingress-stats 
type p2mp active template-match 
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name      : ipmsi-1-73728
Sender        : 10.20.1.3
-----------------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
-----------------------------------------------------------------------
LSP Statistics : 1

lsp-ingress-stats

Syntax

lsp-ingress-stats [active]

lsp-ingress-stats lsp lsp-name

Context

[Tree] (show>router>mpls>mpls-tp lsp-ingress-stats)

Full Context

show router mpls mpls-tp lsp-ingress-stats

Description

This command displays MPLS-TP LSP ingress statistics information.

Parameters

active: Displays statistics for all active LSPs.

lsp-name: Displays statistics for the specified LSP name, up to 64 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp-ingress-stats

Syntax

lsp-ingress-stats

lsp-ingress-stats ip-address lsp lsp-name

lsp-ingress-stats sender-address:lsp-name

Context

[Tree] (clear>router>mpls lsp-ingress-stats)

Full Context

clear router mpls lsp-ingress-stats

Description

This command clears MPLS LSP ingress statistics information.

Platforms

All

lsp-ingress-stats

Syntax

lsp-ingress-stats lsp lsp-name [interval seconds] [repeat repeat] [absolute | rate]ip-address [bits]

Context

[Tree] (monitor>router>mpls lsp-ingress-stats)

Full Context

monitor router mpls lsp-ingress-stats

Description

This command displays ingress statistics for LSP interfaces at the configured interval until the configured count is reached.

Parameters

lsp-name: Specifies the LSP name up to 64 characters.

repeat

Specifies how many times the command is repeated.

Values: 1 to 999

Default: 10

seconds

Specifies the interval for each display, in seconds.

Values: 3 to 60

Default: 10

absolute: Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

ip-address

Specifies the IP address.

Values: a.b.c.d

bits: Displays the output values in bits rather than in octets.

Platforms

All

Output

The following output is an example of LSP ingress statistics information.

Sample Output

B:Dut-C-cpm2# monitor router mpls lsp-ingress-stats lsp sample 192.0.2.1 repeat 3 
interval 10 absolute 
===============================================================================
Monitor ingress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name      : sample
Sender        : 192.0.2.1
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : None                   
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 539                     OutProf Pkts  : 0                      
InProf Octets : 548702                  OutProf Octets: 0                      
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 539                    
InProf Octets : 0                       OutProf Octets: 548702                 
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0                      
InProf Octets : 0                       OutProf Octets: 0                      
FC L1
InProf Pkts   : 1078                    OutProf Pkts  : 0                      
InProf Octets : 1097404                 OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 539                    
InProf Octets : 0                       OutProf Octets: 548702                 
FC EF
InProf Pkts   : 539                     OutProf Pkts  : 0                      
InProf Octets : 548702                  OutProf Octets: 0                      
FC H1
InProf Pkts   : 539                     OutProf Pkts  : 0                      
InProf Octets : 548702                  OutProf Octets: 0                      
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 539                    
InProf Octets : 0                       OutProf Octets: 548702 
-------------------------------------------------------------------------------
At time t = 10 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
Sender        : 192.0.2.1
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : None                   
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 568                     OutProf Pkts  : 0                      
InProf Octets : 578224                  OutProf Octets: 0                      
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 568                    
InProf Octets : 0                       OutProf Octets: 578224                 
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0                      
InProf Octets : 0                       OutProf Octets: 0                      
FC L1
InProf Pkts   : 1136                    OutProf Pkts  : 0                      
InProf Octets : 1156448                 OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 568                    
InProf Octets : 0                       OutProf Octets: 578224                 
FC EF
InProf Pkts   : 568                     OutProf Pkts  : 0                      
InProf Octets : 578224                  OutProf Octets: 0                      
FC H1
InProf Pkts   : 568                     OutProf Pkts  : 0                      
InProf Octets : 578224                  OutProf Octets: 0                      
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 568                    
InProf Octets : 0                       OutProf Octets: 578224 
-------------------------------------------------------------------------------
At time t = 20 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
Sender        : 192.0.2.1
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : None                   
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 597                     OutProf Pkts  : 0                      
InProf Octets : 607746                  OutProf Octets: 0                      
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 597                    
InProf Octets : 0                       OutProf Octets: 607746                 
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0                      
InProf Octets : 0                       OutProf Octets: 0                      
FC L1
InProf Pkts   : 1194                    OutProf Pkts  : 0                      
InProf Octets : 1215492                 OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 597                    
InProf Octets : 0                       OutProf Octets: 607746                 
FC EF
InProf Pkts   : 597                     OutProf Pkts  : 0                      
InProf Octets : 607746                  OutProf Octets: 0                      
FC H1
InProf Pkts   : 597                     OutProf Pkts  : 0                      
InProf Octets : 607746                  OutProf Octets: 0                      
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 597                    
InProf Octets : 0                       OutProf Octets: 607746 
-------------------------------------------------------------------------------
At time t = 30 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name      : sample
Sender        : 192.0.2.1
-------------------------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : None                   
Adm State     : Up                      PSB Match     : True                   
FC BE
InProf Pkts   : 627                     OutProf Pkts  : 0                      
InProf Octets : 638286                  OutProf Octets: 0                      
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 627                    
InProf Octets : 0                       OutProf Octets: 638286                 
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0                      
InProf Octets : 0                       OutProf Octets: 0                      
FC L1
InProf Pkts   : 1254                    OutProf Pkts  : 0                      
InProf Octets : 1276572                 OutProf Octets: 0                      
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 627                    
InProf Octets : 0                       OutProf Octets: 638286                 
FC EF
InProf Pkts   : 627                     OutProf Pkts  : 0                      
InProf Octets : 638286                  OutProf Octets: 0                      
FC H1
InProf Pkts   : 627                     OutProf Pkts  : 0                      
InProf Octets : 638286                  OutProf Octets: 0                      
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 627                    
InProf Octets : 0                       OutProf Octets: 638286 
===============================================================================
B:Dut-C-cpm2#

lsp-ldp

Syntax

lsp-ldp prefix ip-prefix/ip-prefix-length

Context

[Tree] (tools>dump>router>bfd lsp-ldp)

Full Context

tools dump router bfd lsp-ldp

Description

This command displays the local and remote discriminator values for LSP BFD sessions for a given prefix, as well as the BFD session state.

Parameters

prefix ip-prefix/ip-prefix-length

Specifies information for the specified IP prefix and mask length.

Values


ipv4-address	- a.b.c.d
ipv6-address	- x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x - [0 to FFFF]H
	d - [0 to 255]D

Platforms

All

lsp-rsvp

Syntax

lsp-rsvp {head | tail} [tunnel-id tunnel-id]

Context

[Tree] (tools>dump>router>bfd lsp-rsvp)

Full Context

tools dump router bfd lsp-rsvp

Description

This command displays the local and remote discriminator values for LSP RSVP sessions.

Parameters

head: Specifies information for the head of the LSP LDP link.

tail: Specifies information for the tail of the LSP LDP link.

tunnel-id tunnel-id

Displays information about the specified tunnel.

Values: 0 to 4294967295

Platforms

All

lsp-self-ping

Syntax

lsp-self-ping

Context

[Tree] (show>router>mpls lsp-self-ping)

Full Context

show router mpls lsp-self-ping

Description

This command displays LSP Self-ping timeout statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of MPLS LSP Self-ping information.

MPLS LSP Self-ping Output Fields describes the MPLS LSP Self-ping output fields.

Table 35. MPLS LSP Self-ping Output Fields
Label	Description
RSVP-TE LSP Self Ping	Specifies the status of LSP Self-ping
LSP Self Ping Timeout	Specifies the value of the LSP timeout in seconds
LSP Self Ping Interval	Specifies the LSP Self-ping interval in seconds
Number of LSP Self Ping Timeouts	Specifies the total number of LSP Self-ping timeouts

Sample Output

*A:Dut-C>config>router>mpls# show router mpls lsp-self-ping
====================================================
MPLS LSP Self Ping Timeout Statistics
====================================================
RSVP-TE LSP Self Ping                  : Enabled
LSP Self Ping Timeout                  : 60 seconds
LSP Self Ping Interval                 : 1 seconds
LSP Self Ping Timeout Action           : switch
Number of LSP Self Ping Timeouts       : 0
OAM Resource Failures                  : 0
====================================================
*A:Dut-C>config>router>mpls#

lsp-self-ping

Syntax

lsp-self-ping

Context

[Tree] (clear>router>mpls>lsp lsp-self-ping)

Full Context

clear router mpls lsp lsp-self-ping

Description

This command resets or clears counters and timers for MPLS LSP self ping at the LSP level.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp-self-ping

Syntax

lsp-self-ping

Context

[Tree] (clear>router>mpls lsp-self-ping)

Full Context

clear router mpls lsp-self-ping

Description

This command resets or clears counters and timers for MPLS LSP self ping at the LSP level.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

lsp-template

Syntax

lsp-template [lsp-template-name] [detail]

lsp-template [lsp-template-name] bindings

Context

[Tree] (show>router>mpls lsp-template)

Full Context

show router mpls lsp-template

Description

This command displays MPLS LSP template information.

Parameters

lsp-template-name: Specifies the LSP template name, up to 32 characters.

detail: Displays detailed information.

bindings: Displays any bindings associated with the LSP template.

Platforms

All

Output

The following outputs are examples of LSP template information, and LSP Template Output Fields describes the output fields.

Sample Output

*A:Dut-C>config>router>mpls# show router mpls lsp-template 
===============================================================================
MPLS LSP Templates
===============================================================================
Name                               Type           Admin State    No Of LSPs
-------------------------------------------------------------------------------
pce_init_sr_te_template            PceInitP2PSrTe Up             1
pce_init_sr_te_template_nonDef     PceInitP2PSrTe Up             1
-------------------------------------------------------------------------------
LSP Templates : 2

*A:Dut-C>config>router>mpls# show router mpls lsp-template detail 
===============================================================================
MPLS LSP Templates (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP Template : pce_init_sr_te_template 
-------------------------------------------------------------------------------
Type               : PceInitP2PSrTe     Admin State        : Up
From               : 10.20.1.3+         
Template ID        : Default            
Default Path       : fully_loose        
Bandwidth          : 0 Mbps             Hop Limit          : 255
CSPF               : Enabled            Use TE metric      : Disabled
Include Groups     :                    Exclude Groups     :  
None                                    None
Record Route       : Record             Record Label       : Record
Retry Limit        : 0                  Retry Timer        : 30 sec
LSP Count          : 1                  Ref Count          : 0
Load Bal Wt        : N/A                ClassForwarding    : Disabled
VprnAutoBind       : Enabled            
IGP Shortcut       : Enabled            BGP Shortcut       : Enabled
IGP LFA            : Disabled           IGP Rel Metric     : Disabled
Metric             : 0                  
BGP Transport Tunn : Enabled            
Entropy Label      : Enabled+           
PCE Report         : Enabled            
 
Admin Tags         : None               
-------------------------------------------------------------------------------
LSP Template : pce_init_sr_te_template_nonDef 
-------------------------------------------------------------------------------
Type               : PceInitP2PSrTe     Admin State        : Up
From               : 10.20.1.3+         
Template ID        : 4294967295         
Default Path       : fully_loose        
Bandwidth          : 0 Mbps             Hop Limit          : 255
CSPF               : Enabled            Use TE metric      : Disabled
Include Groups     :                    Exclude Groups     :  
None                                    None
Record Route       : Record             Record Label       : Record
Retry Limit        : 0                  Retry Timer        : 30 sec
LSP Count          : 1                  Ref Count          : 0
Load Bal Wt        : N/A                ClassForwarding    : Disabled
VprnAutoBind       : Enabled            
IGP Shortcut       : Enabled            BGP Shortcut       : Enabled
IGP LFA            : Disabled           IGP Rel Metric     : Disabled
Metric             : 0                  
BGP Transport Tunn : Enabled            
Entropy Label      : Enabled+           
PCE Report         : Enabled            
 
Admin Tags         : None               
===============================================================================
+ indicates inherited values

*A:Dut-C# show router mpls lsp-template detail 
========================================================================
MPLS LSP Templates (Detail)
========================================================================
------------------------------------------------------------------------
LSP Template : ipmsi 
------------------------------------------------------------------------
Type               : P2MP               Admin State        : Up
Default Path       : path_ipmsi         Adaptive           : Enabled
Bandwidth          : 0 Mbps             Hop Limit          : 255
CSPF               : Enabled            Use TE metric      : Disabled
Include Groups     :                    Exclude Groups     :  
None                                    None
FastReroute        : Enabled            
FR Method          : Facility           FR Hop Limit       : 16
Record Route       : Record             Record Label       : Record
Retry Limit        : 0                  Retry Timer        : 30 sec
LSP Count          : 3                  Ref Count          : 3
========================================================================

Sample Output

*A:Dut-A# show router mpls lsp-template "toC" detail 
===============================================================================
MPLS LSP Templates (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP Template : toC 
-------------------------------------------------------------------------------
Type               : OnDemandP2PSrTe    Admin State        : Up
From               : 10.20.1.1+
Default Path       : toC                
Bandwidth          : 0 Mbps             Hop Limit          : 255
PathCompMethod     : pce                Metric Type        : igp
Local Sr Protection: preferred          Label Stack Reduct*: Disabled
Include Groups     :                    Exclude Groups     :  
None                                    None
Record Route       : Record             Record Label       : Record
Retry Limit        : 0                  Retry Timer        : 30 sec
LSP Count          : 1                  Ref Count          : 0
Load Bal Wt        : N/A                ClassForwarding    : Disabled
VprnAutoBind       : Enabled            
IGP Shortcut       : Enabled            BGP Shortcut       : Enabled
IGP LFA            : Disabled           IGP Rel Metric     : Disabled
Metric             : 0                  
BGP Transport Tunn : Enabled            
Egress Stats       : Disabled           
Stat Mode          : aggregate          
BFD Template Name  : sbfdTemplate       BFD LSP Ping Intvl : N/A
BFD Enable         : True               BFD Failure-action : None
WaitForUpTimer     : 30                 
Entropy Label      : Enabled+           Override Tunnel ELC: Disabled
PCE Report         : Enabled            
 
Admin Tags         :                    
                     green
Lsp Self Ping      : Inherited          
PCE Control        : Enabled            FallbkPathComp     : not-applicable
Path Profile       :                    
Profile            : 1                  Group              : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
+ indicates inherited values
*A:Dut-A#

Table 36. LSP Template Output Fields
Label	Description
Name	Specifies the name.
Type	Specifies the type.
Admin State	Specifies the up or down administrative state.
No of LSPs	Specifies the number of LSPs.
LSP Templates	Specifies the number of LSP templates.
LSP Template	Specifies the name of the LSP template.
From	Specifies the from IP address.
Template ID	Specifies the template ID.
Default Path	Specifies the default path value.
Bandwidth	Specifies the bandwidth value in Mbps.
Hop Limit	Specifies the maximum number of hops.
CSPF	Specifies the enabled or disabled status for CSPF.
Use TE metric	Specifies the enabled or disabled status for use TE metric.
Include Groups	Specifies the included groups or none for no included groups.
Exclude Groups	Specifies the excluded groups or none for no excluded groups.
Record Route	Specifies the record route value.
Record Label	Specifies the record label value.
Retry Limit	Specifies the retry limit value.
Retry Timer	Specifies the retry timer value.
LSP Count	Specifies the LSP count.
Ref Count	Specifies the reference count number.
Load Bal Wt	Specifies the load balance weight value.
ClassForwarding	Specifies the enabled or disabled status for class forwarding.
VprnAutoBind	Specifies the enabled or disabled status for VPRN autobind.
IGP Shortcut	Specifies the enabled or disabled status for IGP shortcut.
IGP LFA	Specifies the enabled or disabled status for IGP LFA.
IGP Rel Metric	Specifies the enabled or disabled status for IGP Rel metric.
Metric	Specifies the metric value.
BGP Transport Tunn	Specifies the enabled or disabled status for BGP transport tunnels.
Entropy Label	Specifies the enabled or disabled status for entropy label.
PCE Report	Specifies the enabled or disabled status for PCE reports.
Admin Tags	Specifies the administrative tag names or none.
PCE Control	Specifies the enabled or disabled status for the PCE control.
FallbkPathComp	none — No fallback method is configured. local-cspf— Local CSPF fallback is configured.

lspinfo

Syntax

lspinfo [lsp-name] [detail]

Context

[Tree] (tools>dump>router>mpls lspinfo)

Full Context

tools dump router mpls lspinfo

Description

This command dumps MPLS LSP information.

Parameters

lsp-name: Specifies the LSP name, up to 64 characters.

detail: Specifies detailed LSP information.

Platforms

All

Output

The following output is an example of a BFD session that is up (LSPS UP).

Sample Output

*A:Dut-B# tools dump router mpls lspinfo 
LSP "lsp1"  LspIdx 1  LspType Dynamic  State LSPS_UP  Flags 0x2000
NumPaths 3  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled  Template bfdTemp1  PingInterval 60 Failure-Action Failover

The following output is an example of a BFD session that is degraded (LSPS DEGRADED).

*A:Dut-B# /tools dump router mpls  lspinfo "lsp1"
LSP "lsp1"  LspIdx 1  LspType Dynamic  State LSPS_DEGRADED  Flags 0x2000
NumPaths 3  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled  Template bfdTemp1  PingInterval 60 Failure-Action Failover
 
Total Ingress LSP Count         : 1

The following output is an example of LSP Self-ping InProgress.

*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail 
LSP "1"  LspIdx 1  LspType Dynamic  State LSPS_UP  Flags 0x2000
From ::  To 10.20.1.6 AdminState Up  OperState Up  RowStatus Active
NumPaths 1  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
ActivePath 1::p(LspId 34306)
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 20
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit  OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a  PingInterval 60 FailureAction None
PCE Report: Disabled  PCE Control: Disabled
Path Profile:
  None
Admin Tags:
  None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
  Path "p"  Flags 0x0 LspId 34306  LspPathIndex 1 PathType Primary  ActivePath Yes
    RowStatus Active  LastChange 000 00:00:09.730
    AdminState Up  OperState Up  OperStateChange 000 00:00:17.760
    TE Computed Hop List:
      Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
      Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
      Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
    LspPath FsmState LSP_PATH_S_UP  Flags 0x0 
    RetryAttempts 0  RetryInterval 30  NextRetryIn 0secs 
    Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 1Mbps
    TotIgpCost 20 OperMetric 20 MTU 1500
    BFD Disabled  Template n/a  PingInterval 60
    Degraded No
    Oper Values: 
        Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 0Mbps
        RecordRoute RecordLabel No Adspec
        No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
        No FRR
        Metric 20  CSPF No Least Fill Intra-area
        NegotiatedEntropyLabel Disabled
        PCE-Computed No PCE-Reported No PCE-Controlled No
        BFD State N/A
    MBB is in progress - 
        Type Config Change  LspId 34308  FsmState LSP_PATH_S_UP  Flags 0x20 
        RetryAttempts 1  NextRetryIn 0secs  CspfFailures 0 
        Started 2020/05/23 01:09:56.84 UTC  HoldTimeRemaining 21secs
        MBB Self-Ping: State InProgress OamSessId 1007 Started 2020/05/23 01:09:57.61 UTC Remaining 22 secs
 
Total Ingress LSP Count         : 1

The following output is an example of LSP Self-ping OK.

*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail 
LSP "1"  LspIdx 1  LspType Dynamic  State LSPS_UP  Flags 0x2000
From ::  To 10.20.1.6 AdminState Up  OperState Up  RowStatus Active
NumPaths 1  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
ActivePath 1::p(LspId 34308)
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 20
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit  OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a  PingInterval 60 FailureAction None
PCE Report: Disabled  PCE Control: Disabled
Path Profile:
  None
Admin Tags:
  None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
  Path "p"  Flags 0x0 LspId 34308  LspPathIndex 1 PathType Primary  ActivePath Yes
    RowStatus Active  LastChange 000 00:00:42.760
    AdminState Up  OperState Up  OperStateChange 000 00:00:50.790
    TE Computed Hop List:
      Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
      Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
      Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
    LspPath FsmState LSP_PATH_S_UP  Flags 0x0 
    RetryAttempts 0  RetryInterval 30  NextRetryIn 0secs 
    Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 1Mbps
    TotIgpCost 20 OperMetric 20 MTU 1500
    BFD Disabled  Template n/a  PingInterval 60
    Degraded No
    Oper Values: 
        Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 1Mbps
        RecordRoute RecordLabel No Adspec
        No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
        No FRR
        Metric 20  CSPF No Least Fill Intra-area
        NegotiatedEntropyLabel Disabled
        PCE-Computed No PCE-Reported No PCE-Controlled No
        BFD State N/A
    Self-Ping: State OK Ended 2020/05/23 01:10:16.63 UTC 
    Last MBB - 
        Type Config Change  State Successful  CspfFailures 0 FailCode noError
        Started 2020/05/23 01:09:56.84 UTC 
        Ended   2020/05/23 01:10:16.63 UTC 
        Self-ping Started 2020/05/23 01:09:57.61 UTC 
        Self-ping Ended   2020/05/23 01:10:16.63 UTC 
        Pre-MBB IGP Cost 20 
        Pre-MBB Explicit Route - 
        [1] 10.10.5.5  Flags 0x0 
        [2] 10.10.10.6  Flags 0x0 
 
Total Ingress LSP Count         : 1

The following output is an example of LSP Self-Ping TimedOut.

*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail 
LSP "1"  LspIdx 1  LspType Dynamic  State LSPS_UP  Flags 0x2000
From ::  To 10.20.1.6 AdminState Up  OperState Up  RowStatus Active
NumPaths 1  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
ActivePath 1::p(LspId 34310)
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 20
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit  OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a  PingInterval 60 FailureAction None
PCE Report: Disabled  PCE Control: Disabled
Path Profile:
  None
Admin Tags:
  None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 1
  Path "p"  Flags 0x0 LspId 34310  LspPathIndex 1 PathType Primary  ActivePath Yes
    RowStatus Active  LastChange 000 00:00:37.200
    AdminState Up  OperState Up  OperStateChange 000 00:06:25.530
    TE Computed Hop List:
      Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
      Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
      Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
    LspPath FsmState LSP_PATH_S_UP  Flags 0x0 
    RetryAttempts 0  RetryInterval 30  NextRetryIn 0secs 
    Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
    TotIgpCost 20 OperMetric 20 MTU 1500
    BFD Disabled  Template n/a  PingInterval 60
    Degraded No
    Oper Values: 
        Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 2Mbps
        RecordRoute RecordLabel No Adspec
        No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
        No FRR
        Metric 20  CSPF No Least Fill Intra-area
        NegotiatedEntropyLabel Disabled
        PCE-Computed No PCE-Reported No PCE-Controlled No
        BFD State N/A
    Self-Ping: State TimedOut Ended 2020/05/23 01:16:07.61 UTC 
    Last MBB - 
        Type Config Change  State Successful  CspfFailures 0 FailCode noError
        Started 2020/05/23 01:15:37.14 UTC 
        Ended   2020/05/23 01:16:07.61 UTC 
        Self-ping Started 2020/05/23 01:15:37.61 UTC 
        Self-ping Ended   2020/05/23 01:16:07.61 UTC 
        Pre-MBB IGP Cost 20 
        Pre-MBB Explicit Route - 
        [1] 10.10.5.5  Flags 0x0 
        [2] 10.10.10.6  Flags 0x0 
 
Total Ingress LSP Count         : 1

The following output is an example of LSP Self-Ping StartFailed.

*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "3000" detail 
LSP "3000"  LspIdx 3000  LspType Dynamic  State LSPS_UP  Flags 0x2000
From ::  To 10.20.1.6 AdminState Up  OperState Up  RowStatus Active
NumPaths 1  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
ActivePath 3000::p(LspId 32256)
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit  OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a  PingInterval 60 FailureAction None
PCE Report: Disabled  PCE Control: Disabled
Path Profile:
  None
Admin Tags:
  None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
  Path "p"  Flags 0x0 LspId 32256  LspPathIndex 3000 PathType Primary  ActivePath Yes
    RowStatus Active  LastChange 000 00:00:15.940
    AdminState Up  OperState Up  OperStateChange 000 00:01:19.970
    TE Computed Hop List:
      Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
      Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
      Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
    LspPath FsmState LSP_PATH_S_UP  Flags 0x0 
    RetryAttempts 0  RetryInterval 30  NextRetryIn 0secs 
    Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
    TotIgpCost 2000 OperMetric 2000 MTU 1500
    BFD Disabled  Template n/a  PingInterval 60
    Degraded No
    Oper Values: 
        Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 1Mbps
        RecordRoute RecordLabel No Adspec
        No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
        No FRR
        Metric 2000  CSPF No Least Fill Intra-area
        NegotiatedEntropyLabel Disabled
        PCE-Computed No PCE-Reported No PCE-Controlled No
        BFD State N/A
    MBB is in progress - 
        Type Config Change  LspId 32258  FsmState LSP_PATH_S_UP  Flags 0x20 
        RetryAttempts 1  NextRetryIn 0secs  CspfFailures 0 
        Started 2020/05/23 01:27:20.41 UTC  HoldTimeRemaining 1secs
        MBB Self-Ping: State StartFailed OamSessId 0 Started 2020/05/23 01:27:32.88 UTC Remaining 27 secs
 
Total Ingress LSP Count         : 1

The following output is an example of LSP Self-Ping OamNoRsrc.

*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "5000" detail 
LSP "5000"  LspIdx 5000  LspType Dynamic  State LSPS_UP  Flags 0x2000
From ::  To 10.20.1.6 AdminState Up  OperState Up  RowStatus Active
NumPaths 1  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
ActivePath 5000::p(LspId 61954)
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit  OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a  PingInterval 60 FailureAction None
PCE Report: Disabled  PCE Control: Disabled
Path Profile:
  None
Admin Tags:
  None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 1
  Path "p"  Flags 0x0 LspId 61954  LspPathIndex 5000 PathType Primary  ActivePath Yes
    RowStatus Active  LastChange 000 00:02:05.740
    AdminState Up  OperState Up  OperStateChange 000 00:03:18.790
    TE Computed Hop List:
      Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
      Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
      Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
    LspPath FsmState LSP_PATH_S_UP  Flags 0x0 
    RetryAttempts 0  RetryInterval 30  NextRetryIn 0secs 
    Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
    TotIgpCost 2000 OperMetric 2000 MTU 1500
    BFD Disabled  Template n/a  PingInterval 60
    Degraded No
    Oper Values: 
        Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 2Mbps
        RecordRoute RecordLabel No Adspec
        No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
        No FRR
        Metric 2000  CSPF No Least Fill Intra-area
        NegotiatedEntropyLabel Disabled
        PCE-Computed No PCE-Reported No PCE-Controlled No
        BFD State N/A
    Self-Ping: State OamNoRsrc Ended 2020/05/23 01:28:17.87 UTC 
    Last MBB - 
        Type Config Change  State Successful  CspfFailures 0 FailCode noError
        Started 2020/05/23 01:27:22.57 UTC 
        Ended   2020/05/23 01:28:17.87 UTC 
        Self-ping Started 2020/05/23 01:27:45.86 UTC 
        Self-ping Ended   2020/05/23 01:28:17.87 UTC 
        Pre-MBB IGP Cost 2000 
        Pre-MBB Explicit Route - 
        [1] 10.10.5.5  Flags 0x0 
        [2] 10.10.10.6  Flags 0x0 
 
Total Ingress LSP Count         : 1