li commands

li 
   —  li-filter 
      —  associations 
         —  li-ip-filter reference 
            —  ip-filter string 
         —  li-ipv6-filter reference 
            —  ipv6-filter string 
         —  li-mac-filter reference 
            —  mac-filter string 
      —  li-ip-filter string 
         —  description string
         —  entry number 
            —  description string
            —  match 
               —  dst-ip 
                  —  address (ipv4-address | ipv4-prefix-with-host-bits)
                  —  mask string
               —  dst-port 
                  —  eq number
                  —  gt number
                  —  lt number
                  —  range 
                     —  end number
                     —  start number
               —  fragment keyword
               —  protocol (number | keyword)
               —  src-ip 
                  —  address (ipv4-address | ipv4-prefix-with-host-bits)
                  —  mask string
               —  src-port 
                  —  eq number
                  —  gt number
                  —  lt number
                  —  range 
                     —  end number
                     —  start number
      —  li-ipv6-filter string 
         —  description string
         —  entry number 
            —  description string
            —  match 
               —  dst-ip 
                  —  address (ipv6-address | ipv6-prefix-with-host-bits)
                  —  mask string
               —  dst-port 
                  —  eq number
                  —  gt number
                  —  lt number
                  —  range 
                     —  end number
                     —  start number
               —  next-header (number | keyword)
               —  src-ip 
                  —  address (ipv6-address | ipv6-prefix-with-host-bits)
                  —  mask string
               —  src-port 
                  —  eq number
                  —  gt number
                  —  lt number
                  —  range 
                     —  end number
                     —  start number
      —  li-mac-filter string 
         —  description string
         —  entry number 
            —  description string
            —  match 
               —  dst-mac 
                  —  address string
                  —  mask string
               —  frame-type keyword
               —  src-mac 
                  —  address string
                  —  mask string
      —  lock-filter keyword
      —  reserved-block string 
         —  description string
         —  entry-range 
            —  end number
            —  start number
         —  ip-filter string 
         —  ipv6-filter string 
         —  mac-filter string 
   —  li-source string 
      —  admin-state keyword
      —  li-ip-filter reference 
         —  entry reference 
            —  intercept-id number
            —  session-id number
      —  li-ipv6-filter reference 
         —  entry reference 
            —  intercept-id number
            —  session-id number
      —  li-mac-filter reference 
         —  entry reference 
            —  intercept-id number
            —  session-id number
      —  nat 
         —  dslite string b4 string 
            —  intercept-id number
            —  session-id number
         —  ethernet-header 
            —  destination-address string
            —  source-address string
            —  type number
         —  l2-aware string 
            —  intercept-id number
            —  session-id number
         —  nat44 string ip string 
            —  intercept-id number
            —  session-id number
         —  nat64 string ip string 
            —  intercept-id number
            —  session-id number
      —  port string 
         —  egress boolean
         —  ingress boolean
      —  sap string 
         —  egress boolean
         —  ingress boolean
         —  intercept-id number
         —  session-id number
      —  subscriber string 
         —  egress boolean
         —  fc keyword
         —  host-type keyword
         —  ingress boolean
         —  intercept-id number
         —  ip-address string
         —  ip-family keyword
         —  mac-address string
         —  sap-id string
         —  session-id number
         —  sla-profile string
      —  wlan-gw-dsm-ue string 
         —  intercept-id number
         —  session-id number
   —  log 
      —  log-id string 
         —  admin-state keyword
         —  description string
         —  destination 
            —  memory 
               —  max-entries number
            —  netconf 
               —  max-entries number
            —  snmp 
               —  max-entries number
         —  filter string
         —  netconf-stream string
         —  source 
            —  li boolean
         —  time-format keyword
   —  mirror-dest-reservation 
      —  end number
      —  start number
   —  mirror-dest-template string 
      —  layer-3-encap 
         —  direction-bit boolean
         —  encap-type keyword
         —  ip-source string
         —  router-instance string
         —  udp 
            —  destination number
            —  source number
      —  type keyword
   —  nat 
      —  use-outside-ip-address boolean
   —  radius 
      —  mirror-dest-template reference
   —  x-interfaces 
      —  admin-state keyword
      —  correlation-id 
         —  ipoe keyword
         —  pppoe keyword
      —  ine-identifier string
      —  lic string 
         —  authentication 
            —  password string
            —  private-ki string
            —  sequence-group string
         —  description string
         —  identifier string
         —  ipv4 
            —  ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
         —  port number
         —  router-instance string
      —  user-db string
      —  x1 
         —  ipv4 
            —  local-address (ipv4-address-no-zone | ipv6-address-no-zone)
         —  lic-peer reference
         —  local-tcp-port number
         —  timeouts 
            —  message-timeout number
      —  x2 
         —  ipv4 
            —  local-address (ipv4-address-no-zone | ipv6-address-no-zone)
         —  lic-peer reference
         —  timeouts 
            —  keep-alive number
            —  request number
      —  x3 
         —  alarms 
            —  cpu-alarm 
               —  high-threshold number
               —  low-threshold number
            —  memory-alarm 
               —  high-threshold number
               —  low-threshold number
            —  throughput-alarm 
               —  high-threshold number
               —  low-threshold number
         —  ipv4 
            —  local-address-range 
               —  end string
               —  start string
         —  li-group number
         —  lic-peers reference 
         —  session-limit number
         —  timeouts 
            —  keep-alive number
            —  request number
            —  target-retry-wait number

li command descriptions

li


	Synopsis	Configure lawful intercept
	Context	li
	Tree	li
	Introduced	19.10.R1
	Platforms	All

li-filter


	Synopsis	Enter the li-filter context
	Context	li li-filter
	Tree	li-filter
	Introduced	19.10.R1
	Platforms	All

associations


	Synopsis	Enter the associations context
	Context	li li-filter associations
	Tree	associations
	Introduced	19.10.R1
	Platforms	All

li-ip-filter [li-filter-name] reference


	Synopsis	Enter the li-ip-filter list instance
	Context	li li-filter associations li-ip-filter reference
	Tree	li-ip-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	Name of an existing LI IP filter
	Context	li li-filter associations li-ip-filter reference
	Tree	li-ip-filter
	Reference	li li-filter li-ip-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

ip-filter [filter-name] string


	Synopsis	Add a list entry for ip-filter
	Context	li li-filter associations li-ip-filter reference ip-filter string
	Tree	ip-filter
	Max. Instances	1
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter to be associated with specified LI IP filter
	Context	li li-filter associations li-ip-filter reference ip-filter string
	Tree	ip-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

li-ipv6-filter [li-filter-name] reference


	Synopsis	Enter the li-ipv6-filter list instance
	Context	li li-filter associations li-ipv6-filter reference
	Tree	li-ipv6-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	LI IPv6 filter name
	Context	li li-filter associations li-ipv6-filter reference
	Tree	li-ipv6-filter
	Reference	li li-filter li-ipv6-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

ipv6-filter [filter-name] string


	Synopsis	Add a list entry for ipv6-filter
	Context	li li-filter associations li-ipv6-filter reference ipv6-filter string
	Tree	ipv6-filter
	Max. Instances	1
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter to be associated with specified LI IP filter
	Context	li li-filter associations li-ipv6-filter reference ipv6-filter string
	Tree	ipv6-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

li-mac-filter [li-filter-name] reference


	Synopsis	Enter the li-mac-filter list instance
	Context	li li-filter associations li-mac-filter reference
	Tree	li-mac-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	LI MAC filter name
	Context	li li-filter associations li-mac-filter reference
	Tree	li-mac-filter
	Reference	li li-filter li-mac-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

mac-filter [filter-name] string


	Synopsis	Add a list entry for mac-filter
	Context	li li-filter associations li-mac-filter reference mac-filter string
	Tree	mac-filter
	Max. Instances	1
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter to be associated with specified LI IP filter
	Context	li li-filter associations li-mac-filter reference mac-filter string
	Tree	mac-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

li-ip-filter [li-filter-name] string


	Synopsis	Enter the li-ip-filter list instance
	Context	li li-filter li-ip-filter string
	Tree	li-ip-filter
	Description	Commands in this context create LI IPv4 filter lists, which can be used to create confidential IPv4 filter based LI source entries. The LI IPv4 filter entries are merged into normal IPv4 filters configured with the li li-filter associations and li li-filter reserved-block commands. The LI IPv4 filter entries are visible only to users with LI permissions.
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] string


	Synopsis	LI filter name
	Context	li li-filter li-ip-filter string
	Tree	li-ip-filter
	Description	This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-ip-filter string description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] number


	Synopsis	Enter the entry list instance
	Context	li li-filter li-ip-filter string entry number
	Tree	entry
	Description	Commands in this context configure an entry for the LI filter. Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries. The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important. Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] number


	Synopsis	LI filter entry ID
	Context	li li-filter li-ip-filter string entry number
	Tree	entry
	Range	1 to 65535
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-ip-filter string entry number description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

match


	Synopsis	Enter the match context
	Context	li li-filter li-ip-filter string entry number match
	Tree	match
	Description	Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur. A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
	Introduced	19.10.R1
	Platforms	All

dst-ip


	Synopsis	Enter the dst-ip context
	Context	li li-filter li-ip-filter string entry number match dst-ip
	Tree	dst-ip
	Introduced	19.10.R1
	Platforms	All

address (ipv4-address | ipv4-prefix-with-host-bits)


	Synopsis	IP address to match
	Context	li li-filter li-ip-filter string entry number match dst-ip address (ipv4-address \| ipv4-prefix-with-host-bits)
	Tree	address
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	Mask that is applied as an AND to the IP address
	Context	li li-filter li-ip-filter string entry number match dst-ip mask string
	Tree	mask
	Introduced	19.10.R1
	Platforms	All

dst-port


	Synopsis	Enter the dst-port context
	Context	li li-filter li-ip-filter string entry number match dst-port
	Tree	dst-port
	Introduced	19.10.R1
	Platforms	All

eq number


	Synopsis	Condition on equality to specified value
	Context	li li-filter li-ip-filter string entry number match dst-port eq number
	Tree	eq
	Range	0 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

gt number


	Synopsis	Condition on being greater than the specified value
	Context	li li-filter li-ip-filter string entry number match dst-port gt number
	Tree	gt
	Range	0 to 65534
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

lt number


	Synopsis	Condition on being less than the specified value
	Context	li li-filter li-ip-filter string entry number match dst-port lt number
	Tree	lt
	Range	1 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

range


	Synopsis	Enable the range context
	Context	li li-filter li-ip-filter string entry number match dst-port range
	Tree	range
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound port to match
	Context	li li-filter li-ip-filter string entry number match dst-port range end number
	Tree	end
	Range	1 to 65535
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound port to match
	Context	li li-filter li-ip-filter string entry number match dst-port range start number
	Tree	start
	Range	0 to 65534
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

fragment keyword


	Synopsis	Fragmentation state as the match criterion
	Context	li li-filter li-ip-filter string entry number match fragment keyword
	Tree	fragment
	Options	false, true
	Introduced	20.2.R1
	Platforms	All

protocol (number | keyword)


	Synopsis	IP protocol to match
	Context	li li-filter li-ip-filter string entry number match protocol (number \| keyword)
	Tree	protocol
	Range	0 to 255
	Options	tcp-udp, icmp, igmp, ip, tcp, egp, igp, udp, rdp, ipv6, ipv6-route, ipv6-frag, idrp, rsvp, gre, ipv6-icmp, ipv6-no-nxt, ipv6-opts, iso-ip, eigrp, ospf-igp, ether-ip, encap, pnni, pim, vrrp, l2tp, stp, ptp, isis, crtp, crudp, sctp
	Introduced	19.10.R1
	Platforms	All

src-ip


	Synopsis	Enter the src-ip context
	Context	li li-filter li-ip-filter string entry number match src-ip
	Tree	src-ip
	Introduced	19.10.R1
	Platforms	All

address (ipv4-address | ipv4-prefix-with-host-bits)


	Synopsis	IP address to match
	Context	li li-filter li-ip-filter string entry number match src-ip address (ipv4-address \| ipv4-prefix-with-host-bits)
	Tree	address
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	Mask that is applied as an AND to the IP address
	Context	li li-filter li-ip-filter string entry number match src-ip mask string
	Tree	mask
	Introduced	19.10.R1
	Platforms	All

src-port


	Synopsis	Enter the src-port context
	Context	li li-filter li-ip-filter string entry number match src-port
	Tree	src-port
	Introduced	19.10.R1
	Platforms	All

eq number


	Synopsis	Condition on equality to specified value
	Context	li li-filter li-ip-filter string entry number match src-port eq number
	Tree	eq
	Range	0 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

gt number


	Synopsis	Condition on being greater than the specified value
	Context	li li-filter li-ip-filter string entry number match src-port gt number
	Tree	gt
	Range	0 to 65534
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

lt number


	Synopsis	Condition on being less than the specified value
	Context	li li-filter li-ip-filter string entry number match src-port lt number
	Tree	lt
	Range	1 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

range


	Synopsis	Enable the range context
	Context	li li-filter li-ip-filter string entry number match src-port range
	Tree	range
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound port to match
	Context	li li-filter li-ip-filter string entry number match src-port range end number
	Tree	end
	Range	1 to 65535
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound port to match
	Context	li li-filter li-ip-filter string entry number match src-port range start number
	Tree	start
	Range	0 to 65534
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

li-ipv6-filter [li-filter-name] string


	Synopsis	Enter the li-ipv6-filter list instance
	Context	li li-filter li-ipv6-filter string
	Tree	li-ipv6-filter
	Description	Commands in this context create LI IPv6 filter lists, which can be used to create confidential IPv6 filter based LI source entries. The LI IPv6 filter entries are merged into normal IPv6 filters configured with the li li-filter associations and li li-filter reserved-block commands. However, the LI IPv6 filter entries are visible only to users with LI permissions.
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] string


	Synopsis	LI filter name
	Context	li li-filter li-ipv6-filter string
	Tree	li-ipv6-filter
	Description	This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-ipv6-filter string description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] number


	Synopsis	Enter the entry list instance
	Context	li li-filter li-ipv6-filter string entry number
	Tree	entry
	Description	Commands in this context configure an entry for the LI filter. Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries. The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important. Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] number


	Synopsis	LI filter entry ID
	Context	li li-filter li-ipv6-filter string entry number
	Tree	entry
	Range	1 to 65535
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-ipv6-filter string entry number description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

match


	Synopsis	Enter the match context
	Context	li li-filter li-ipv6-filter string entry number match
	Tree	match
	Description	Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur. A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
	Introduced	19.10.R1
	Platforms	All

dst-ip


	Synopsis	Enter the dst-ip context
	Context	li li-filter li-ipv6-filter string entry number match dst-ip
	Tree	dst-ip
	Introduced	19.10.R1
	Platforms	All

address (ipv6-address | ipv6-prefix-with-host-bits)


	Synopsis	IP address to match
	Context	li li-filter li-ipv6-filter string entry number match dst-ip address (ipv6-address \| ipv6-prefix-with-host-bits)
	Tree	address
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	Mask that is applied as an AND to the IPv6 address
	Context	li li-filter li-ipv6-filter string entry number match dst-ip mask string
	Tree	mask
	Introduced	19.10.R1
	Platforms	All

dst-port


	Synopsis	Enter the dst-port context
	Context	li li-filter li-ipv6-filter string entry number match dst-port
	Tree	dst-port
	Introduced	19.10.R1
	Platforms	All

eq number


	Synopsis	Condition on equality to specified value
	Context	li li-filter li-ipv6-filter string entry number match dst-port eq number
	Tree	eq
	Range	0 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

gt number


	Synopsis	Condition on being greater than the specified value
	Context	li li-filter li-ipv6-filter string entry number match dst-port gt number
	Tree	gt
	Range	0 to 65534
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

lt number


	Synopsis	Condition on being less than the specified value
	Context	li li-filter li-ipv6-filter string entry number match dst-port lt number
	Tree	lt
	Range	1 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

range


	Synopsis	Enable the range context
	Context	li li-filter li-ipv6-filter string entry number match dst-port range
	Tree	range
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound port to match
	Context	li li-filter li-ipv6-filter string entry number match dst-port range end number
	Tree	end
	Range	1 to 65535
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound port to match
	Context	li li-filter li-ipv6-filter string entry number match dst-port range start number
	Tree	start
	Range	0 to 65534
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

next-header (number | keyword)


	Synopsis	IP protocol to match
	Context	li li-filter li-ipv6-filter string entry number match next-header (number \| keyword)
	Tree	next-header
	Range	0 to 255
	Options	tcp-udp, icmp, igmp, ip, tcp, egp, igp, udp, rdp, ipv6, ipv6-route, ipv6-frag, idrp, rsvp, gre, ipv6-icmp, ipv6-no-nxt, ipv6-opts, iso-ip, eigrp, ospf-igp, ether-ip, encap, pnni, pim, vrrp, l2tp, stp, ptp, isis, crtp, crudp, sctp
	Introduced	19.10.R1
	Platforms	All

src-ip


	Synopsis	Enter the src-ip context
	Context	li li-filter li-ipv6-filter string entry number match src-ip
	Tree	src-ip
	Introduced	19.10.R1
	Platforms	All

address (ipv6-address | ipv6-prefix-with-host-bits)


	Synopsis	IP address to match
	Context	li li-filter li-ipv6-filter string entry number match src-ip address (ipv6-address \| ipv6-prefix-with-host-bits)
	Tree	address
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	Mask that is applied as an AND to the IPv6 address
	Context	li li-filter li-ipv6-filter string entry number match src-ip mask string
	Tree	mask
	Introduced	19.10.R1
	Platforms	All

src-port


	Synopsis	Enter the src-port context
	Context	li li-filter li-ipv6-filter string entry number match src-port
	Tree	src-port
	Introduced	19.10.R1
	Platforms	All

eq number


	Synopsis	Condition on equality to specified value
	Context	li li-filter li-ipv6-filter string entry number match src-port eq number
	Tree	eq
	Range	0 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

gt number


	Synopsis	Condition on being greater than the specified value
	Context	li li-filter li-ipv6-filter string entry number match src-port gt number
	Tree	gt
	Range	0 to 65534
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

lt number


	Synopsis	Condition on being less than the specified value
	Context	li li-filter li-ipv6-filter string entry number match src-port lt number
	Tree	lt
	Range	1 to 65535
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

range


	Synopsis	Enable the range context
	Context	li li-filter li-ipv6-filter string entry number match src-port range
	Tree	range
	Notes	The following elements are part of a choice: eq, gt, lt, or range.
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound port to match
	Context	li li-filter li-ipv6-filter string entry number match src-port range end number
	Tree	end
	Range	1 to 65535
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound port to match
	Context	li li-filter li-ipv6-filter string entry number match src-port range start number
	Tree	start
	Range	0 to 65534
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

li-mac-filter [li-filter-name] string


	Synopsis	Enter the li-mac-filter list instance
	Context	li li-filter li-mac-filter string
	Tree	li-mac-filter
	Description	Commands in this context configure LI MAC filter lists, which can be used to create confidential MAC filter based LI source entries. The LI MAC filter entries are merged into normal MAC filters as configured using the li-filter associations and li-filter reserved-block commands. The LI MAC filter entries are visible only to users with LI permissions.
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] string


	Synopsis	LI filter name
	Context	li li-filter li-mac-filter string
	Tree	li-mac-filter
	Description	This command specifies the LI filter name. Filter names cannot start with an underscore character (for example, “_my-filter”) and cannot use the name “default”.
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-mac-filter string description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] number


	Synopsis	Enter the entry list instance
	Context	li li-filter li-mac-filter string entry number
	Tree	entry
	Description	Commands in this context configure an entry for the LI filter. Multiple entries can be created using unique entry ID numbers within the filter. An entry in an LI filter always has an implicit action of “forward”. LI filter entries can be used as LI source entries. The entry numbers for LI filters serve only as keys for managing the entries (deleting entries, and so on). The order of the LI filter entries is not guaranteed to match the entry numbers and the software may reorder entries. Operators must therefore use LI entries in such a way that their relative order is not important. Entries removed from the filter are immediately removed from all services or network ports where the associated filter is applied.
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] number


	Synopsis	LI filter entry ID
	Context	li li-filter li-mac-filter string entry number
	Tree	entry
	Range	1 to 65535
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter li-mac-filter string entry number description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

match


	Synopsis	Enter the match context
	Context	li li-filter li-mac-filter string entry number match
	Tree	match
	Description	Commands in this context configure match criteria for the filter entry. If more than one match criteria (within one match statement) are configured, all criteria must be satisfied (and function) for a match to occur. A match context may consist of multiple match criteria, but multiple match statements cannot be configured per entry.
	Introduced	19.10.R1
	Platforms	All

dst-mac


	Synopsis	Enable the dst-mac context
	Context	li li-filter li-mac-filter string entry number match dst-mac
	Tree	dst-mac
	Introduced	19.10.R1
	Platforms	All

address string


	Synopsis	MAC address for filter match
	Context	li li-filter li-mac-filter string entry number match dst-mac address string
	Tree	address
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	MAC address mask for filter match
	Context	li li-filter li-mac-filter string entry number match dst-mac mask string
	Tree	mask
	Default	ff:ff:ff:ff:ff:ff
	Introduced	19.10.R1
	Platforms	All

frame-type keyword


	Synopsis	Frame type for MAC filter match
	Context	li li-filter li-mac-filter string entry number match frame-type keyword
	Tree	frame-type
	Description	This command specifies the frame type for MAC filter entry matching. A filter can be edited even if an LI source references an entry in the filter.
	Options	802dot3, 802dot2-llc, 802dot2-snap, ethernet-ii
	Default	802dot3
	Introduced	19.10.R1
	Platforms	All

src-mac


	Synopsis	Enable the src-mac context
	Context	li li-filter li-mac-filter string entry number match src-mac
	Tree	src-mac
	Introduced	19.10.R1
	Platforms	All

address string


	Synopsis	MAC address for filter match
	Context	li li-filter li-mac-filter string entry number match src-mac address string
	Tree	address
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

mask string


	Synopsis	MAC address mask for filter match
	Context	li li-filter li-mac-filter string entry number match src-mac mask string
	Tree	mask
	Default	ff:ff:ff:ff:ff:ff
	Introduced	19.10.R1
	Platforms	All

lock-filter keyword


	Synopsis	Lock state of LI filters
	Context	li li-filter lock-filter keyword
	Tree	lock-filter
	Options	lock, unlock
	Default	lock
	Introduced	19.10.R1
	Platforms	All

reserved-block [block-name] string


	Synopsis	Enter the reserved-block list instance
	Context	li li-filter reserved-block string
	Tree	reserved-block
	Max. Instances	8
	Introduced	19.10.R1
	Platforms	All

[block-name] string


	Synopsis	Object uniquely identifying an LI reserved block
	Context	li li-filter reserved-block string
	Tree	reserved-block
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li li-filter reserved-block string description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

entry-range


	Synopsis	Enable the entry-range context
	Context	li li-filter reserved-block string entry-range
	Tree	entry-range
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound of the range
	Context	li li-filter reserved-block string entry-range end number
	Tree	end
	Range	1 to 2097151
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound of the range
	Context	li li-filter reserved-block string entry-range start number
	Tree	start
	Range	1 to 2097151
	Notes	This element is mandatory.
	Introduced	19.10.R1
	Platforms	All

ip-filter [filter-name] string


	Synopsis	Add a list entry for ip-filter
	Context	li li-filter reserved-block string ip-filter string
	Tree	ip-filter
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter ID for LI filter reserved block
	Context	li li-filter reserved-block string ip-filter string
	Tree	ip-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

ipv6-filter [filter-name] string


	Synopsis	Add a list entry for ipv6-filter
	Context	li li-filter reserved-block string ipv6-filter string
	Tree	ipv6-filter
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter ID for LI filter reserved block
	Context	li li-filter reserved-block string ipv6-filter string
	Tree	ipv6-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

mac-filter [filter-name] string


	Synopsis	Add a list entry for mac-filter
	Context	li li-filter reserved-block string mac-filter string
	Tree	mac-filter
	Introduced	19.10.R1
	Platforms	All

[filter-name] string


	Synopsis	IP filter ID for LI filter reserved block
	Context	li li-filter reserved-block string mac-filter string
	Tree	mac-filter
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

li-source [service-name] string


	Synopsis	Enter the li-source list instance
	Context	li li-source string
	Tree	li-source
	Introduced	19.10.R1
	Platforms	All

[service-name] string


	Synopsis	Administrative service name
	Context	li li-source string
	Tree	li-source
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

admin-state keyword


	Synopsis	Administrative state of mirror service
	Context	li li-source string admin-state keyword
	Tree	admin-state
	Options	enable, disable
	Default	enable
	Introduced	19.10.R1
	Platforms	All

li-ip-filter [li-filter-name] reference


	Synopsis	Enter the li-ip-filter list instance
	Context	li li-source string li-ip-filter reference
	Tree	li-ip-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	A unique ID for an li-ip-filter
	Context	li li-source string li-ip-filter reference
	Tree	li-ip-filter
	Reference	li li-filter li-ip-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] reference


	Synopsis	Enter the entry list instance
	Context	li li-source string li-ip-filter reference entry reference
	Tree	entry
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] reference


	Synopsis	A unique ID for an li-ip-filter entry
	Context	li li-source string li-ip-filter reference entry reference
	Tree	entry
	Reference	li li-filter li-ip-filter string entry number
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept ID of the traffic flow
	Context	li li-source string li-ip-filter reference entry reference intercept-id number
	Tree	intercept-id
	Description	This command configures the intercept ID that is inserted into the packet header for all mirrrored packets of the associated LI source entry. This intercept ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. For LI source entries, when the configure mirror mirror-dest encap layer-3-encap header-type command is configured with ip-udp-shim routable encap, an intercept-id field (as part of the routable encap) is always present in the mirrored packets. If there is no intercept ID configured for an LI source entry, the default value is inserted. When the mirror service is configured with ip-gre routable encap under the header-type command, no intercept ID is inserted and none should be specified against the LI source entries.
	Range	1 to 1073741823
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session ID of the traffic flow
	Context	li li-source string li-ip-filter reference entry reference session-id number
	Tree	session-id
	Description	This command configures the session ID that is inserted into the packet header for all mirrored packets of the associated LI source entry. This session ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. The session ID is only valid and used for mirror services that are configured with ip-udp-shim routable encap under the configure mirror mirror-dest encap layer-3-encap header-type command. For all types of LI source entries, when the mirror service is configured with ip-udp-shim routable encap, a session ID field (as part of the routable encap) is always present in the mirrored packets. If no session ID is configured for an LI source entry, the default value is inserted. When a mirror service is configured with ip-gre routable encap under the header-type command, no session ID is inserted and none is specified against the LI source entries.
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

li-ipv6-filter [li-filter-name] reference


	Synopsis	Enter the li-ipv6-filter list instance
	Context	li li-source string li-ipv6-filter reference
	Tree	li-ipv6-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	A unique ID for an li-ipv6-filter
	Context	li li-source string li-ipv6-filter reference
	Tree	li-ipv6-filter
	Reference	li li-filter li-ipv6-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] reference


	Synopsis	Enter the entry list instance
	Context	li li-source string li-ipv6-filter reference entry reference
	Tree	entry
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] reference


	Synopsis	A unique ID for an li-ipv6-filter entry
	Context	li li-source string li-ipv6-filter reference entry reference
	Tree	entry
	Reference	li li-filter li-ipv6-filter string entry number
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept ID of the traffic flow
	Context	li li-source string li-ipv6-filter reference entry reference intercept-id number
	Tree	intercept-id
	Description	This command configures the intercept ID that is inserted into the packet header for all mirrrored packets of the associated LI source entry. This intercept ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. For LI source entries, when the configure mirror mirror-dest encap layer-3-encap header-type command is configured with ip-udp-shim routable encap, an intercept-id field (as part of the routable encap) is always present in the mirrored packets. If there is no intercept ID configured for an LI source entry, the default value is inserted. When the mirror service is configured with ip-gre routable encap under the header-type command, no intercept ID is inserted and none should be specified against the LI source entries.
	Range	1 to 1073741823
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session ID of the traffic flow
	Context	li li-source string li-ipv6-filter reference entry reference session-id number
	Tree	session-id
	Description	This command configures the session ID that is inserted into the packet header for all mirrored packets of the associated LI source entry. This session ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. The session ID is only valid and used for mirror services that are configured with ip-udp-shim routable encap under the configure mirror mirror-dest encap layer-3-encap header-type command. For all types of LI source entries, when the mirror service is configured with ip-udp-shim routable encap, a session ID field (as part of the routable encap) is always present in the mirrored packets. If no session ID is configured for an LI source entry, the default value is inserted. When a mirror service is configured with ip-gre routable encap under the header-type command, no session ID is inserted and none is specified against the LI source entries.
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

li-mac-filter [li-filter-name] reference


	Synopsis	Enter the li-mac-filter list instance
	Context	li li-source string li-mac-filter reference
	Tree	li-mac-filter
	Introduced	19.10.R1
	Platforms	All

[li-filter-name] reference


	Synopsis	A unique ID for an li-mac-filter
	Context	li li-source string li-mac-filter reference
	Tree	li-mac-filter
	Reference	li li-filter li-mac-filter string
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

entry [li-entry-id] reference


	Synopsis	Enter the entry list instance
	Context	li li-source string li-mac-filter reference entry reference
	Tree	entry
	Min. Instances	1
	Introduced	19.10.R1
	Platforms	All

[li-entry-id] reference


	Synopsis	A unique ID for an li-mac-filter entry
	Context	li li-source string li-mac-filter reference entry reference
	Tree	entry
	Reference	li li-filter li-mac-filter string entry number
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept ID of the traffic flow
	Context	li li-source string li-mac-filter reference entry reference intercept-id number
	Tree	intercept-id
	Description	This command configures the intercept ID that is inserted into the packet header for all mirrrored packets of the associated LI source entry. This intercept ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. For LI source entries, when the configure mirror mirror-dest encap layer-3-encap header-type command is configured with ip-udp-shim routable encap, an intercept-id field (as part of the routable encap) is always present in the mirrored packets. If there is no intercept ID configured for an LI source entry, the default value is inserted. When the mirror service is configured with ip-gre routable encap under the header-type command, no intercept ID is inserted and none should be specified against the LI source entries.
	Range	1 to 1073741823
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session ID of the traffic flow
	Context	li li-source string li-mac-filter reference entry reference session-id number
	Tree	session-id
	Description	This command configures the session ID that is inserted into the packet header for all mirrored packets of the associated LI source entry. This session ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. The session ID is only valid and used for mirror services that are configured with ip-udp-shim routable encap under the configure mirror mirror-dest encap layer-3-encap header-type command. For all types of LI source entries, when the mirror service is configured with ip-udp-shim routable encap, a session ID field (as part of the routable encap) is always present in the mirrored packets. If no session ID is configured for an LI source entry, the default value is inserted. When a mirror service is configured with ip-gre routable encap under the header-type command, no session ID is inserted and none is specified against the LI source entries.
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

nat


	Synopsis	Enter the nat context
	Context	li li-source string nat
	Tree	nat
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

dslite [router-instance] string b4 string


	Synopsis	Enter the dslite list instance
	Context	li li-source string nat dslite string b4 string
	Tree	dslite
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[router-instance] string


	Synopsis	Name of the service
	Context	li li-source string nat dslite string b4 string
	Tree	dslite
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

b4 string


	Synopsis	B4 prefix of the subscriber
	Context	li li-source string nat dslite string b4 string
	Tree	dslite
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

intercept-id number


	Synopsis	The intercept id of the traffic flow
	Context	li li-source string nat dslite string b4 string intercept-id number
	Tree	intercept-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

session-id number


	Synopsis	The session id of the traffic flow
	Context	li li-source string nat dslite string b4 string session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

ethernet-header


	Synopsis	Enter the ethernet-header context
	Context	li li-source string nat ethernet-header
	Tree	ethernet-header
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

destination-address string


	Synopsis	Destination MAC address field of Ethernet encapsulation
	Context	li li-source string nat ethernet-header destination-address string
	Tree	destination-address
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

source-address string


	Synopsis	Source MAC address field of the Ethernet encapsulation
	Context	li li-source string nat ethernet-header source-address string
	Tree	source-address
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

type number


	Synopsis	Ethertype of the ethernet encapsulation
	Context	li li-source string nat ethernet-header type number
	Tree	type
	Range	1536 to 65535
	Default	1792
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

l2-aware [subscriber-id] string


	Synopsis	Enter the l2-aware list instance
	Context	li li-source string nat l2-aware string
	Tree	l2-aware
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[subscriber-id] string


	Synopsis	The string identifying the subscribe
	Context	li li-source string nat l2-aware string
	Tree	l2-aware
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

intercept-id number


	Synopsis	The intercept id of the traffic flow
	Context	li li-source string nat l2-aware string intercept-id number
	Tree	intercept-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

session-id number


	Synopsis	The session id of the traffic flow
	Context	li li-source string nat l2-aware string session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

nat44 [router-instance] string ip string


	Synopsis	Enter the nat44 list instance
	Context	li li-source string nat nat44 string ip string
	Tree	nat44
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[router-instance] string


	Synopsis	Name of the service
	Context	li li-source string nat nat44 string ip string
	Tree	nat44
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

ip string


	Synopsis	IP address of the subscriber
	Context	li li-source string nat nat44 string ip string
	Tree	nat44
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

intercept-id number


	Synopsis	The intercept id of the traffic flow
	Context	li li-source string nat nat44 string ip string intercept-id number
	Tree	intercept-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

session-id number


	Synopsis	The session id of the traffic flow
	Context	li li-source string nat nat44 string ip string session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

nat64 [router-instance] string ip string


	Synopsis	Enter the nat64 list instance
	Context	li li-source string nat nat64 string ip string
	Tree	nat64
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[router-instance] string


	Synopsis	Name of the service
	Context	li li-source string nat nat64 string ip string
	Tree	nat64
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

ip string


	Synopsis	IP prefix of the subscriber
	Context	li li-source string nat nat64 string ip string
	Tree	nat64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

intercept-id number


	Synopsis	The intercept id of the traffic flow
	Context	li li-source string nat nat64 string ip string intercept-id number
	Tree	intercept-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

session-id number


	Synopsis	The session id of the traffic flow
	Context	li li-source string nat nat64 string ip string session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

port [port-id] string


	Synopsis	Enter the port list instance
	Context	li li-source string port string
	Tree	port
	Introduced	20.5.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

[port-id] string


	Synopsis	Port ID
	Context	li li-source string port string
	Tree	port
	Notes	This element is part of a list key.
	Introduced	20.5.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

egress boolean


	Synopsis	Perform lawful intercept on egress traffic
	Context	li li-source string port string egress boolean
	Tree	egress
	Description	When configured to true, the router allows lawful intercept on egress traffic. This command configures packets that egress the SAP to be mirrored. Egress packets are mirrored to the mirror destination after egress packet modification.
	Default	false
	Introduced	20.5.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

ingress boolean


	Synopsis	Perform lawful intercept on ingress traffic
	Context	li li-source string port string ingress boolean
	Tree	ingress
	Description	When configured to true, the router allows lawful intercept on ingress traffic. This command configures packets that ingress the SAP to be mirrored. Ingress packets are mirrored to the mirror destination before ingress packet modification.
	Default	false
	Introduced	20.5.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

sap [sap-id] string


	Synopsis	Enter the sap list instance
	Context	li li-source string sap string
	Tree	sap
	Description	Commands in this context create a service access point (SAP) within an LI configuration. The specified SAP must define a FastE, GigE, or XGigE, or XGigE access port with a dot1q, null, or q-in-q encapsulation type.
	Introduced	19.10.R1
	Platforms	All

[sap-id] string


	Synopsis	SAP ID
	Context	li li-source string sap string
	Tree	sap
	Description	This command specifies the physical port identifier portion of the SAP definition.
	String Length	1 to 45
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

egress boolean


	Synopsis	Perform lawful intercept on egress traffic
	Context	li li-source string sap string egress boolean
	Tree	egress
	Description	When configured to true, the router allows lawful intercept on egress traffic. This command configures packets that egress the SAP to be mirrored. Egress packets are mirrored to the mirror destination after egress packet modification.
	Default	false
	Introduced	19.10.R1
	Platforms	All

ingress boolean


	Synopsis	Perform lawful intercept on ingress traffic
	Context	li li-source string sap string ingress boolean
	Tree	ingress
	Description	When configured to true, the router allows lawful intercept on ingress traffic. This command configures packets that ingress the SAP to be mirrored. Ingress packets are mirrored to the mirror destination before ingress packet modification.
	Default	false
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept ID of the traffic flow
	Context	li li-source string sap string intercept-id number
	Tree	intercept-id
	Description	This command configures the intercept ID that is inserted into the packet header for all mirrrored packets of the associated LI source entry. This intercept ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. For LI source entries, when the configure mirror mirror-dest encap layer-3-encap header-type command is configured with ip-udp-shim routable encap, an intercept-id field (as part of the routable encap) is always present in the mirrored packets. If there is no intercept ID configured for an LI source entry, the default value is inserted. When the mirror service is configured with ip-gre routable encap under the header-type command, no intercept ID is inserted and none should be specified against the LI source entries.
	Range	1 to 1073741823
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session ID of the traffic flow
	Context	li li-source string sap string session-id number
	Tree	session-id
	Description	This command configures the session ID that is inserted into the packet header for all mirrored packets of the associated LI source entry. This session ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. The session ID is only valid and used for mirror services that are configured with ip-udp-shim routable encap under the configure mirror mirror-dest encap layer-3-encap header-type command. For all types of LI source entries, when the mirror service is configured with ip-udp-shim routable encap, a session ID field (as part of the routable encap) is always present in the mirrored packets. If no session ID is configured for an LI source entry, the default value is inserted. When a mirror service is configured with ip-gre routable encap under the header-type command, no session ID is inserted and none is specified against the LI source entries.
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

subscriber [subscriber-id] string


	Synopsis	Enter the subscriber list instance
	Context	li li-source string subscriber string
	Tree	subscriber
	Description	Commands in this context add hosts of a subscriber to a mirroring service.
	Introduced	19.10.R1
	Platforms	All

[subscriber-id] string


	Synopsis	Subscriber ID
	Context	li li-source string subscriber string
	Tree	subscriber
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

egress boolean


	Synopsis	Perform lawful intercept on egress traffic
	Context	li li-source string subscriber string egress boolean
	Tree	egress
	Description	When configured to true, the router allows lawful intercept on egress traffic. This command configures packets that egress the SAP to be mirrored. Egress packets are mirrored to the mirror destination after egress packet modification.
	Default	false
	Introduced	19.10.R1
	Platforms	All

fc keyword


	Synopsis	Forwarding classes to be mirrored
	Context	li li-source string subscriber string fc keyword
	Tree	fc
	Description	This command specifies the name of the forwarding class with which to associate LI traffic. The forwarding class name must already be defined within the system. If the FC name is not already defined, an error is returned and this command has no effect. If the FC name is defined, the forwarding class associated with the FC name overrides the default forwarding class.
	Options	be, l2, af, l1, h2, ef, h1, nc
	Max. Instances	8
	Introduced	19.10.R1
	Platforms	All

host-type keyword


	Synopsis	Subscriber host type to be monitored
	Context	li li-source string subscriber string host-type keyword
	Tree	host-type
	Description	This command specifies the host type for LI.
	Options	ipoe, ppp
	Introduced	19.10.R1
	Platforms	All

ingress boolean


	Synopsis	Perform lawful intercept on ingress traffic
	Context	li li-source string subscriber string ingress boolean
	Tree	ingress
	Description	When configured to true, the router allows lawful intercept on ingress traffic. This command configures packets that ingress the SAP to be mirrored. Ingress packets are mirrored to the mirror destination before ingress packet modification.
	Default	false
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept ID of the traffic flow
	Context	li li-source string subscriber string intercept-id number
	Tree	intercept-id
	Description	This command configures the intercept ID that is inserted into the packet header for all mirrrored packets of the associated LI source entry. This intercept ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. For LI source entries, when the configure mirror mirror-dest encap layer-3-encap header-type command is configured with ip-udp-shim routable encap, an intercept-id field (as part of the routable encap) is always present in the mirrored packets. If there is no intercept ID configured for an LI source entry, the default value is inserted. When the mirror service is configured with ip-gre routable encap under the header-type command, no intercept ID is inserted and none should be specified against the LI source entries.
	Range	1 to 1073741823
	Introduced	19.10.R1
	Platforms	All

ip-address string


	Synopsis	IP address of the subscriber
	Context	li li-source string subscriber string ip-address string
	Tree	ip-address
	Description	This command specifies the service IP address (system IP address) of the remote device sending LI traffic. If 0.0.0.0 is specified, any remote router is allowed to send to this service.
	Notes	The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
	Introduced	19.10.R1
	Platforms	All

ip-family keyword


	Synopsis	IP family for LI
	Context	li li-source string subscriber string ip-family keyword
	Tree	ip-family
	Description	This command specifies the IP family for LI.
	Options	ipv4, ipv6
	Introduced	19.10.R1
	Platforms	All

mac-address string


	Synopsis	The source MAC address
	Context	li li-source string subscriber string mac-address string
	Tree	mac-address
	Description	This command specifies a MAC address when defining a static host. Multiple static hosts may be configured with the same MAC address because each definition is distinguished by a unique IP address.
	Notes	The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
	Introduced	19.10.R1
	Platforms	All

sap-id string


	Synopsis	SAP ID
	Context	li li-source string subscriber string sap-id string
	Tree	sap-id
	String Length	1 to 45
	Notes	The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session ID of the traffic flow
	Context	li li-source string subscriber string session-id number
	Tree	session-id
	Description	This command configures the session ID that is inserted into the packet header for all mirrored packets of the associated LI source entry. This session ID can be used (for example by a downstream LI gateway) to identify the particular LI session to which the packet belongs. The session ID is only valid and used for mirror services that are configured with ip-udp-shim routable encap under the configure mirror mirror-dest encap layer-3-encap header-type command. For all types of LI source entries, when the mirror service is configured with ip-udp-shim routable encap, a session ID field (as part of the routable encap) is always present in the mirrored packets. If no session ID is configured for an LI source entry, the default value is inserted. When a mirror service is configured with ip-gre routable encap under the header-type command, no session ID is inserted and none is specified against the LI source entries.
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

sla-profile string


	Synopsis	SLA profile
	Context	li li-source string subscriber string sla-profile string
	Tree	sla-profile
	Description	This command specifies an SLA profile name. Each host of a subscriber can use a different SLA profile. This option allows interception of only the hosts using the specified SLA profile. In some deployments, SLA profiles are assigned per type of traffic. There can be, for example, a specific SLA profile for voice traffic (which could be used for all SIP hosts).
	String Length	1 to 32
	Notes	The following elements are part of a choice: (ip-address, mac-address, and sap-id) or sla-profile.
	Introduced	19.10.R1
	Platforms	All

wlan-gw-dsm-ue [mac] string


	Synopsis	Enter the wlan-gw-dsm-ue list instance
	Context	li li-source string wlan-gw-dsm-ue string
	Tree	wlan-gw-dsm-ue
	Introduced	19.10.R1
	Platforms	All

[mac] string


	Synopsis	MAC address of the DSM UE
	Context	li li-source string wlan-gw-dsm-ue string
	Tree	wlan-gw-dsm-ue
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	All

intercept-id number


	Synopsis	Intercept identifier
	Context	li li-source string wlan-gw-dsm-ue string intercept-id number
	Tree	intercept-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

session-id number


	Synopsis	Session identifier
	Context	li li-source string wlan-gw-dsm-ue string session-id number
	Tree	session-id
	Range	1 to 4294967295
	Introduced	19.10.R1
	Platforms	All

log


	Synopsis	Enter the log context
	Context	li log
	Tree	log
	Introduced	19.10.R1
	Platforms	All

log-id [name] string


	Synopsis	Enter the log-id list instance
	Context	li log log-id string
	Tree	log-id
	Max. Instances	30
	Introduced	19.10.R1
	Platforms	All

[name] string


	Synopsis	Log ID
	Context	li log log-id string
	Tree	log-id
	String Length	1 to 64
	Notes	This element is part of a list key.
	Introduced	21.2.R1
	Platforms	All

admin-state keyword


	Synopsis	The administrative state of the log
	Context	li log log-id string admin-state keyword
	Tree	admin-state
	Options	enable, disable
	Default	enable
	Introduced	19.10.R1
	Platforms	All

description string


	Synopsis	Text description
	Context	li log log-id string description string
	Tree	description
	String Length	1 to 80
	Introduced	19.10.R1
	Platforms	All

destination


	Synopsis	Enter the destination context
	Context	li log log-id string destination
	Tree	destination
	Introduced	19.10.R1
	Platforms	All

memory


	Synopsis	Enable the memory context
	Context	li log log-id string destination memory
	Tree	memory
	Description	Commands in this context configure log events directed to a memory file. A memory file is a circular buffer. When the file is full, each new entry replaces the oldest entry in the log.
	Notes	The following elements are part of a choice: memory, netconf, or snmp.
	Introduced	19.10.R1
	Platforms	All

max-entries number


WARNING: Modifying this element recreates the parent element automatically for the new value to take effect.
	Synopsis	Number of events stored in this memory log
	Context	li log log-id string destination memory max-entries number
	Tree	max-entries
	Range	50 to 1024
	Default	100
	Introduced	19.10.R1
	Platforms	All

netconf


	Synopsis	Enable the netconf context
	Context	li log log-id string destination netconf
	Tree	netconf
	Description	Commands in this context configure log events directed to a NETCONF session as notifications. A NETCONF client can subscribe to a NETCONF log using the configured netconf-stream for the log in a subscription request. One or more NETCONF sessions can subscribe to a NETCONF log or stream.
	Notes	The following elements are part of a choice: memory, netconf, or snmp.
	Introduced	20.2.R1
	Platforms	All

max-entries number


WARNING: Modifying this element recreates the parent element automatically for the new value to take effect.
	Synopsis	Maximum number of events stored in the NETCONF log
	Context	li log log-id string destination netconf max-entries number
	Tree	max-entries
	Description	This command configures the maximum number of events stored in the NETCONF log. If this setting needs to be modified, the log ID must be removed and re-created.
	Range	50 to 1024
	Default	100
	Introduced	20.2.R1
	Platforms	All

snmp


	Synopsis	Enable the snmp context
	Context	li log log-id string destination snmp
	Tree	snmp
	Description	Commands in this context configure log events directed to the snmp-trap-group associated with the log ID. A local circular memory log is maintained for SNMP logs.
	Notes	The following elements are part of a choice: memory, netconf, or snmp.
	Introduced	19.10.R1
	Platforms	All

max-entries number


WARNING: Modifying this element recreates the parent element automatically for the new value to take effect.
	Synopsis	Number of events stored in this snmp log
	Context	li log log-id string destination snmp max-entries number
	Tree	max-entries
	Range	50 to 1024
	Default	100
	Introduced	19.10.R1
	Platforms	All

filter string


	Synopsis	Event filter ID to associate with log ID configuration
	Context	li log log-id string filter string
	Tree	filter
	String Length	1 to 64
	Introduced	19.10.R1
	Platforms	All

netconf-stream string


	Synopsis	Destination NETCONF stream name
	Context	li log log-id string netconf-stream string
	Tree	netconf-stream
	String Length	1 to 32
	Introduced	20.2.R1
	Platforms	All

source


	Synopsis	Enter the source context
	Context	li log log-id string source
	Tree	source
	Introduced	19.10.R1
	Platforms	All

li boolean


	Synopsis	Event stream for events configured for LI activities
	Context	li log log-id string source li boolean
	Tree	li
	Default	false
	Introduced	19.10.R1
	Platforms	All

time-format keyword


	Synopsis	Time zone to display date and time
	Context	li log log-id string time-format keyword
	Tree	time-format
	Options	utc, local
	Default	utc
	Introduced	19.10.R1
	Platforms	All

mirror-dest-reservation


	Synopsis	Enter the mirror-dest-reservation context
	Context	li mirror-dest-reservation
	Tree	mirror-dest-reservation
	Description	Commands in this context configure the attributes to reserve mirror destination resources.
	Introduced	19.10.R1
	Platforms	All

end number


	Synopsis	Upper bound of the mirror destination ID
	Context	li mirror-dest-reservation end number
	Tree	end
	Range	1 to 2147483647
	Introduced	19.10.R1
	Platforms	All

start number


	Synopsis	Lower bound of the mirror destination ID
	Context	li mirror-dest-reservation start number
	Tree	start
	Range	1 to 2147483647
	Introduced	19.10.R1
	Platforms	All

mirror-dest-template [name] string


	Synopsis	Enter the mirror-dest-template list instance
	Context	li mirror-dest-template string
	Tree	mirror-dest-template
	Max. Instances	8
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[name] string


	Synopsis	Mirror destination template name
	Context	li mirror-dest-template string
	Tree	mirror-dest-template
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

layer-3-encap


	Synopsis	Enter the layer-3-encap context
	Context	li mirror-dest-template string layer-3-encap
	Tree	layer-3-encap
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

direction-bit boolean


	Synopsis	Use highest bit in interception ID for flow direction
	Context	li mirror-dest-template string layer-3-encap direction-bit boolean
	Tree	direction-bit
	Default	false
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

encap-type keyword


WARNING: Modifying this element recreates the parent element automatically for the new value to take effect.
	Synopsis	The header type of the layer 3 encapsulation.
	Context	li mirror-dest-template string layer-3-encap encap-type keyword
	Tree	encap-type
	Options	ip-udp-shim, ip-gre
	Default	ip-udp-shim
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

ip-source string


	Synopsis	Source IPv4 address for Layer 3 encapsulation
	Context	li mirror-dest-template string layer-3-encap ip-source string
	Tree	ip-source
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

router-instance string


	Synopsis	Virtual router instance to inject mirrored packets
	Context	li mirror-dest-template string layer-3-encap router-instance string
	Tree	router-instance
	String Length	1 to 64
	Default	Base
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

udp


	Synopsis	Enter the udp context
	Context	li mirror-dest-template string layer-3-encap udp
	Tree	udp
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

destination number


	Synopsis	Destination UDP port
	Context	li mirror-dest-template string layer-3-encap udp destination number
	Tree	destination
	Range	1 to 65535
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

source number


	Synopsis	Source UDP port
	Context	li mirror-dest-template string layer-3-encap udp source number
	Tree	source
	Range	1 to 65535
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

type keyword


WARNING: Modifying this element recreates the parent element automatically for the new value to take effect.
	Synopsis	Encapsulation type supported by the mirror service
	Context	li mirror-dest-template string type keyword
	Tree	type
	Options	ether, ip-only
	Default	ether
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

nat


	Synopsis	Enter the nat context
	Context	li nat
	Tree	nat
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

use-outside-ip-address boolean


	Synopsis	Report outside IP address for L2-Aware NAT subscribers
	Context	li nat use-outside-ip-address boolean
	Tree	use-outside-ip-address
	Default	false
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

radius


	Synopsis	Enter the radius context
	Context	li radius
	Tree	radius
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

mirror-dest-template reference


	Synopsis	RADIUS triggered mirror destination template
	Context	li radius mirror-dest-template reference
	Tree	mirror-dest-template
	Reference	li mirror-dest-template string
	Introduced	19.10.R1
	Platforms	7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

x-interfaces


	Synopsis	Enter the x-interfaces context
	Context	li x-interfaces
	Tree	x-interfaces
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

admin-state keyword


	Synopsis	Administrative state of the x-interfaces
	Context	li x-interfaces admin-state keyword
	Tree	admin-state
	Options	enable, disable
	Default	disable
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

correlation-id


	Synopsis	Enter the correlation-id context
	Context	li x-interfaces correlation-id
	Tree	correlation-id
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ipoe keyword


	Synopsis	RADIUS accounting ID type for subscriber correlation
	Context	li x-interfaces correlation-id ipoe keyword
	Tree	ipoe
	Options	radius-host-acct-id, radius-queue-acct-id, radius-session-acct-id
	Default	radius-host-acct-id
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

pppoe keyword


	Synopsis	RADIUS accounting ID type for subscriber correlation
	Context	li x-interfaces correlation-id pppoe keyword
	Tree	pppoe
	Options	radius-host-acct-id, radius-queue-acct-id, radius-session-acct-id
	Default	radius-host-acct-id
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ine-identifier string


	Synopsis	Intercepting Network Element (INE) ID
	Context	li x-interfaces ine-identifier string
	Tree	ine-identifier
	String Length	1 to 32
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

lic [name] string


	Synopsis	Enter the lic list instance
	Context	li x-interfaces lic string
	Tree	lic
	Max. Instances	18
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

[name] string


	Synopsis	LIC name
	Context	li x-interfaces lic string
	Tree	lic
	String Length	1 to 32
	Notes	This element is part of a list key.
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

authentication


	Synopsis	Enter the authentication context
	Context	li x-interfaces lic string authentication
	Tree	authentication
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

password string


	Synopsis	Password for the X1 and X2 interfaces
	Context	li x-interfaces lic string authentication password string
	Tree	password
	String Length	1 to 50
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

private-ki string


	Synopsis	Private Ki string for the X1 and X2 interfaces
	Context	li x-interfaces lic string authentication private-ki string
	Tree	private-ki
	String Length	1 to 50
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

sequence-group string


	Synopsis	Sequence group for the X1 and X2 interfaces
	Context	li x-interfaces lic string authentication sequence-group string
	Tree	sequence-group
	String Length	1 to 42
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

description string


	Synopsis	Text description
	Context	li x-interfaces lic string description string
	Tree	description
	String Length	1 to 80
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

identifier string


	Synopsis	LIC ID
	Context	li x-interfaces lic string identifier string
	Tree	identifier
	String Length	1 to 32
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ipv4


	Synopsis	Enter the ipv4 context
	Context	li x-interfaces lic string ipv4
	Tree	ipv4
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ip-address (ipv4-address-no-zone | ipv6-address-no-zone)


	Synopsis	IP address of the LIC
	Context	li x-interfaces lic string ipv4 ip-address (ipv4-address-no-zone \| ipv6-address-no-zone)
	Tree	ip-address
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

port number


	Synopsis	TCP port associated with the LIC
	Context	li x-interfaces lic string port number
	Tree	port
	Range	0 to 65535
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

router-instance string


	Synopsis	Virtual router instance used by the X-interfaces
	Context	li x-interfaces lic string router-instance string
	Tree	router-instance
	String Length	0 to 64
	Default
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

user-db string


	Synopsis	Location of the data-trigger host for the LIC
	Context	li x-interfaces user-db string
	Tree	user-db
	String Length	1 to 32
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

x1


	Synopsis	Enter the x1 context
	Context	li x-interfaces x1
	Tree	x1
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ipv4


	Synopsis	Enter the ipv4 context
	Context	li x-interfaces x1 ipv4
	Tree	ipv4
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

local-address (ipv4-address-no-zone | ipv6-address-no-zone)


	Synopsis	X1 interface IP address
	Context	li x-interfaces x1 ipv4 local-address (ipv4-address-no-zone \| ipv6-address-no-zone)
	Tree	local-address
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

lic-peer reference


	Synopsis	Peer LIC for the X1 interface
	Context	li x-interfaces x1 lic-peer reference
	Tree	lic-peer
	Reference	li x-interfaces lic string
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

local-tcp-port number


	Synopsis	Local TCP port used for the X1 interface
	Context	li x-interfaces x1 local-tcp-port number
	Tree	local-tcp-port
	Range	1 to 65535
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

timeouts


	Synopsis	Enter the timeouts context
	Context	li x-interfaces x1 timeouts
	Tree	timeouts
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

message-timeout number


	Synopsis	Maximum time for the LIC to reply to an X1 message
	Context	li x-interfaces x1 timeouts message-timeout number
	Tree	message-timeout
	Range	180 to 300
	Units	seconds
	Default	180
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

x2


	Synopsis	Enter the x2 context
	Context	li x-interfaces x2
	Tree	x2
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ipv4


	Synopsis	Enter the ipv4 context
	Context	li x-interfaces x2 ipv4
	Tree	ipv4
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

local-address (ipv4-address-no-zone | ipv6-address-no-zone)


	Synopsis	X2 interface IP address
	Context	li x-interfaces x2 ipv4 local-address (ipv4-address-no-zone \| ipv6-address-no-zone)
	Tree	local-address
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

lic-peer reference


	Synopsis	Peer LIC for the X2 interface
	Context	li x-interfaces x2 lic-peer reference
	Tree	lic-peer
	Reference	li x-interfaces lic string
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

timeouts


	Synopsis	Enter the timeouts context
	Context	li x-interfaces x2 timeouts
	Tree	timeouts
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

keep-alive number


	Synopsis	Keep-alive timeout
	Context	li x-interfaces x2 timeouts keep-alive number
	Tree	keep-alive
	Range	300 to 600
	Units	seconds
	Default	300
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

request number


	Synopsis	Tx2-normal timeout
	Context	li x-interfaces x2 timeouts request number
	Tree	request
	Range	5 to 30
	Units	seconds
	Default	5
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

x3


	Synopsis	Enter the x3 context
	Context	li x-interfaces x3
	Tree	x3
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

alarms


	Synopsis	Enter the alarms context
	Context	li x-interfaces x3 alarms
	Tree	alarms
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

cpu-alarm


	Synopsis	Enter the cpu-alarm context
	Context	li x-interfaces x3 alarms cpu-alarm
	Tree	cpu-alarm
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

high-threshold number


	Synopsis	High threshold value of the CPU usage alarm
	Context	li x-interfaces x3 alarms cpu-alarm high-threshold number
	Tree	high-threshold
	Range	1 to 100
	Units	percent
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

low-threshold number


	Synopsis	Low threshold value of the CPU usage alarm
	Context	li x-interfaces x3 alarms cpu-alarm low-threshold number
	Tree	low-threshold
	Range	0 to 99
	Units	percent
	Default	0
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

memory-alarm


	Synopsis	Enter the memory-alarm context
	Context	li x-interfaces x3 alarms memory-alarm
	Tree	memory-alarm
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

high-threshold number


	Synopsis	High threshold of the packet buffer memory usage alarm
	Context	li x-interfaces x3 alarms memory-alarm high-threshold number
	Tree	high-threshold
	Range	1 to 100
	Units	percent
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

low-threshold number


	Synopsis	Low threshold of the packet buffer memory usage alarm
	Context	li x-interfaces x3 alarms memory-alarm low-threshold number
	Tree	low-threshold
	Range	0 to 99
	Units	percent
	Default	0
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

throughput-alarm


	Synopsis	Enter the throughput-alarm context
	Context	li x-interfaces x3 alarms throughput-alarm
	Tree	throughput-alarm
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

high-threshold number


	Synopsis	High threshold value of the throughput alarm
	Context	li x-interfaces x3 alarms throughput-alarm high-threshold number
	Tree	high-threshold
	Range	1 to 4294967295
	Units	megabps
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

low-threshold number


	Synopsis	Low threshold value of the throughput alarm
	Context	li x-interfaces x3 alarms throughput-alarm low-threshold number
	Tree	low-threshold
	Range	1 to 4294967295
	Units	megabps
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

ipv4


	Synopsis	Enter the ipv4 context
	Context	li x-interfaces x3 ipv4
	Tree	ipv4
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

local-address-range


	Synopsis	Enter the local-address-range context
	Context	li x-interfaces x3 ipv4 local-address-range
	Tree	local-address-range
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

end string


	Synopsis	Upper bound of the range
	Context	li x-interfaces x3 ipv4 local-address-range end string
	Tree	end
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

start string


	Synopsis	Lower bound of the range
	Context	li x-interfaces x3 ipv4 local-address-range start string
	Tree	start
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

li-group number


	Synopsis	ISA group of the X3 interface
	Context	li x-interfaces x3 li-group number
	Tree	li-group
	Range	1 to 4
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

lic-peers [name] reference


	Synopsis	Add a list entry for lic-peers
	Context	li x-interfaces x3 lic-peers reference
	Tree	lic-peers
	Max. Instances	16
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

[name] reference


	Synopsis	Peer LIC for the X3 interface
	Context	li x-interfaces x3 lic-peers reference
	Tree	lic-peers
	Reference	li x-interfaces lic string
	Notes	This element is part of a list key.
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

session-limit number


	Synopsis	Maximum number of X3 sessions initiated to the LIC
	Context	li x-interfaces x3 session-limit number
	Tree	session-limit
	Range	1 to 32
	Default	32
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

timeouts


	Synopsis	Enter the timeouts context
	Context	li x-interfaces x3 timeouts
	Tree	timeouts
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

keep-alive number


	Synopsis	Keep-alive timeout
	Context	li x-interfaces x3 timeouts keep-alive number
	Tree	keep-alive
	Range	300 to 600
	Units	seconds
	Default	300
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

request number


	Synopsis	Tx3-normal timeout
	Context	li x-interfaces x3 timeouts request number
	Tree	request
	Range	5 to 30
	Units	seconds
	Default	5
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e

target-retry-wait number


	Synopsis	Retry interval for target tunnel setup
	Context	li x-interfaces x3 timeouts target-retry-wait number
	Tree	target-retry-wait
	Range	300 to 1200
	Units	seconds
	Default	300
	Introduced	21.5.R1
	Platforms	7750 SR-1, 7750 SR-7/12/12e