Obsolete commands

This chapter provides a list of commands that are marked as “status obsolete” in the Nokia YANG models and the MD-CLI. These commands can no longer be used and are considered invalid. Only releases in which commands are initially obsoleted are included in this section. If applicable, the equivalent configuration groups command is also obsoleted (but not explicitly listed).

See the SR OS Software Release Notes for more information.

22.2.R1

card commands:

  • configure card mda access egress pool

  • configure card mda access egress pool amber-alarm-threshold

  • configure card mda access egress pool apply-groups

  • configure card mda access egress pool apply-groups-exclude

  • configure card mda access egress pool name

  • configure card mda access egress pool red-alarm-threshold

  • configure card mda access egress pool resv-cbs

  • configure card mda access egress pool resv-cbs amber-alarm-action

  • configure card mda access egress pool resv-cbs amber-alarm-action max

  • configure card mda access egress pool resv-cbs amber-alarm-action step

  • configure card mda access egress pool resv-cbs cbs

  • configure card mda access egress pool slope-policy

  • configure card mda access ingress pool

  • configure card mda access ingress pool amber-alarm-threshold

  • configure card mda access ingress pool apply-groups

  • configure card mda access ingress pool apply-groups-exclude

  • configure card mda access ingress pool name

  • configure card mda access ingress pool red-alarm-threshold

  • configure card mda access ingress pool resv-cbs

  • configure card mda access ingress pool resv-cbs amber-alarm-action

  • configure card mda access ingress pool resv-cbs amber-alarm-action max

  • configure card mda access ingress pool resv-cbs amber-alarm-action step

  • configure card mda access ingress pool resv-cbs cbs

  • configure card mda access ingress pool slope-policy

  • configure card mda network egress pool

  • configure card mda network egress pool amber-alarm-threshold

  • configure card mda network egress pool apply-groups

  • configure card mda network egress pool apply-groups-exclude

  • configure card mda network egress pool name

  • configure card mda network egress pool red-alarm-threshold

  • configure card mda network egress pool resv-cbs

  • configure card mda network egress pool resv-cbs amber-alarm-action

  • configure card mda network egress pool resv-cbs amber-alarm-action max

  • configure card mda network egress pool resv-cbs amber-alarm-action step

  • configure card mda network egress pool resv-cbs cbs

  • configure card mda network egress pool slope-policy

fwd-path-ext commands:

  • configure fwd-path-ext fpe application pw-port

  • configure fwd-path-ext fpe application vxlan-termination

  • configure fwd-path-ext fpe application vxlan-termination router-instance

log commands:

  • configure log accounting-policy custom-record override-counter

  • configure log accounting-policy custom-record override-counter apply-groups

  • configure log accounting-policy custom-record override-counter apply-groups-exclude

  • configure log accounting-policy custom-record override-counter e-counters

  • configure log accounting-policy custom-record override-counter e-counters in-profile-octets-discarded-count

  • configure log accounting-policy custom-record override-counter e-counters in-profile-octets-forwarded-count

  • configure log accounting-policy custom-record override-counter e-counters in-profile-packets-discarded-count

  • configure log accounting-policy custom-record override-counter e-counters in-profile-packets-forwarded-count

  • configure log accounting-policy custom-record override-counter e-counters out-profile-octets-discarded-count

  • configure log accounting-policy custom-record override-counter e-counters out-profile-octets-forwarded-count

  • configure log accounting-policy custom-record override-counter e-counters out-profile-packets-discarded-count

  • configure log accounting-policy custom-record override-counter e-counters out-profile-packets-forwarded-count

  • configure log accounting-policy custom-record override-counter i-counters

  • configure log accounting-policy custom-record override-counter i-counters all-octets-offered-count

  • configure log accounting-policy custom-record override-counter i-counters all-packets-offered-count

  • configure log accounting-policy custom-record override-counter i-counters high-octets-discarded-count

  • configure log accounting-policy custom-record override-counter i-counters high-packets-discarded-count

  • configure log accounting-policy custom-record override-counter i-counters in-profile-octets-forwarded-count

  • configure log accounting-policy custom-record override-counter i-counters in-profile-packets-forwarded-count

  • configure log accounting-policy custom-record override-counter i-counters low-octets-discarded-count

  • configure log accounting-policy custom-record override-counter i-counters low-packets-discarded-count

  • configure log accounting-policy custom-record override-counter i-counters out-profile-octets-forwarded-count

  • configure log accounting-policy custom-record override-counter i-counters out-profile-packets-forwarded-count

  • configure log accounting-policy custom-record override-counter id

  • configure log accounting-policy custom-record ref-override-counter

  • configure log accounting-policy custom-record ref-override-counter all

  • configure log accounting-policy custom-record ref-override-counter e-counters

  • configure log accounting-policy custom-record ref-override-counter e-counters in-profile-octets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters in-profile-octets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters in-profile-packets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters in-profile-packets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters out-profile-octets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters out-profile-octets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters out-profile-packets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter e-counters out-profile-packets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters

  • configure log accounting-policy custom-record ref-override-counter i-counters all-octets-offered-count

  • configure log accounting-policy custom-record ref-override-counter i-counters all-packets-offered-count

  • configure log accounting-policy custom-record ref-override-counter i-counters high-octets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters high-packets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters in-profile-octets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters in-profile-packets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters low-octets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters low-packets-discarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters out-profile-octets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter i-counters out-profile-packets-forwarded-count

  • configure log accounting-policy custom-record ref-override-counter id

port commands:

  • configure port dwdm channel

  • configure port dwdm coherent channel

  • configure port dwdm rxdtv-adjust

  • configure port dwdm wavetracker

  • configure port dwdm wavetracker apply-groups

  • configure port dwdm wavetracker apply-groups-exclude

  • configure port dwdm wavetracker encode

  • configure port dwdm wavetracker encode key1

  • configure port dwdm wavetracker encode key2

  • configure port dwdm wavetracker power-control

  • configure port dwdm wavetracker power-control target-power

  • configure port dwdm wavetracker report-alarm

  • configure port dwdm wavetracker report-alarm encoder-degrade

  • configure port dwdm wavetracker report-alarm encoder-failure

  • configure port dwdm wavetracker report-alarm missing-pluggable-voa

  • configure port dwdm wavetracker report-alarm power-control-degrade

  • configure port dwdm wavetracker report-alarm power-control-failure

  • configure port dwdm wavetracker report-alarm power-control-high-limit

  • configure port dwdm wavetracker report-alarm power-control-low-limit

  • configure port ethernet access ingress queue-group queue-overrides queue monitor-depth

service commands:

  • configure service cpipe sap ingress qos sap-ingress overrides queue monitor-depth

  • configure service epipe sap ingress qos sap-ingress overrides queue monitor-depth

  • configure service ies interface sap ingress qos sap-ingress overrides queue monitor-depth

  • configure service ipipe sap ingress qos sap-ingress overrides queue monitor-depth

  • configure service vpls sap ingress qos sap-ingress overrides queue monitor-depth

  • configure service vprn interface sap ingress qos sap-ingress overrides queue monitor-depth

subscriber-mgmt commands:

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter apply-groups

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter apply-groups-exclude

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters in-profile-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters in-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters in-profile-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters in-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters out-profile-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters out-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters out-profile-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter e-counters out-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters all-octets-offered-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters all-packets-offered-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters high-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters high-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters in-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters in-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters low-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters low-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters out-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter i-counters out-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record override-counter id

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter all

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters in-profile-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters in-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters in-profile-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters in-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters out-profile-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters out-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters out-profile-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter e-counters out-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters all-octets-offered-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters all-packets-offered-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters high-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters high-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters in-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters in-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters low-octets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters low-packets-discarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters out-profile-octets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter i-counters out-profile-packets-forwarded-count

  • configure subscriber-mgmt radius-accounting-policy custom-record ref-override-counter id

system commands:

  • configure system security tls client-cipher-list cipher

  • configure system security tls client-cipher-list cipher apply-groups

  • configure system security tls client-cipher-list cipher apply-groups-exclude

  • configure system security tls client-cipher-list cipher index

  • configure system security tls client-cipher-list cipher name

  • configure system security tls server-cipher-list cipher

  • configure system security tls server-cipher-list cipher apply-groups

  • configure system security tls server-cipher-list cipher apply-groups-exclude

  • configure system security tls server-cipher-list cipher index

  • configure system security tls server-cipher-list cipher name

22.10.R1

system commands:

  • configure system security ssh client-cipher-list-v1

  • configure system security ssh client-cipher-list-v1 apply-groups

  • configure system security ssh client-cipher-list-v1 apply-groups-exclude

  • configure system security ssh client-cipher-list-v1 cipher

  • configure system security ssh client-cipher-list-v1 cipher apply-groups

  • configure system security ssh client-cipher-list-v1 cipher apply-groups-exclude

  • configure system security ssh client-cipher-list-v1 cipher index

  • configure system security ssh client-cipher-list-v1 cipher name

  • configure system security ssh server-cipher-list-v1

  • configure system security ssh server-cipher-list-v1 apply-groups

  • configure system security ssh server-cipher-list-v1 apply-groups-exclude

  • configure system security ssh server-cipher-list-v1 cipher

  • configure system security ssh server-cipher-list-v1 cipher apply-groups

  • configure system security ssh server-cipher-list-v1 cipher apply-groups-exclude

  • configure system security ssh server-cipher-list-v1 cipher index

  • configure system security ssh server-cipher-list-v1 cipher name

  • configure system security ssh version