g Commands

gateway

gateway

Syntax

gateway brg-id brg-ident

Context

[Tree] (show>subscr-mgmt>vrgw>brg gateway)

Full Context

show subscriber-mgmt vrgw brg gateway

Description

This command displays all operational data related to the BRG.

Parameters

brg-ident

Specifies the BRG identifier, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management BRG gateway information.

Sample Output 
Node# show subscriber-mgmt brg gateway brg-id "00:00:00:00:00:05"
===============================================================================
Bridged Residential Gateways
===============================================================================
Identifier                   : 00:00:00:00:00:05
SLAAC prefix                 : 3ffe:0:0:5::/64
Subnet                       : 21.0.0.1/24
Subnet start address         : 21.0.0.20
Subnet end address           : 21.0.0.40
DMZ address                  : (Not Specified)
DNS 1 v4                     : (Not Specified)
DNS 1 v6                     : (Not Specified)
DNS 2 v4                     : (Not Specified)
DNS 2 v6                     : (Not Specified)
NBNS 1                       : (Not Specified)
NBNS 2                       : (Not Specified)
DHCP lease time              : 600
DHCP stream destination      : (Not Specified)
IPv4 portal URL              : (Not Specified)
IPv6 portal URL              : (Not Specified)
BRG profile                  : brg
Subscriber profile           : subprof_mig_4
SLA profile                  : (Not Specified)
UPnP policy override         : (Not Specified)
DMZ address in use           : no
Proxy authenticated          : yes
Ingress IPv4 filter override : N/A
Egress IPv4 filter override  : N/A
Ingress IPv6 filter override : N/A
Egress IPv6 filter override  : N/A
No QoS overrides found.
No Filter rules received.
===============================================================================

gateway

Syntax

gateway brg-id brg-ident

gateway brg-id brg-ident idle-bindings [binding ieee-address]

gateway all-gateways

gateway brg-id brg-ident all-hosts

gateway brg-id brg-ident host ieee-address

Context

[Tree] (clear>subscr-mgmt>vrgw>brg gateway)

Full Context

clear subscriber-mgmt vrgw brg gateway

Description

This command clears BRG gateway data.

Parameters

brg-ident

Clears the specified BRG and all related hosts from the system.

idle-bindings

Clears a specific idle binding or all idle binding from the BRG. An idle binding is a DHCP lease that has not been expired but for which the host has been removed due to idle timeout.

ieee-address

Specifies the MAC address of the binding to remove.

all-gateways

Clears all BRGs and related hosts from the system.

all-hosts

Clears all hosts belonging to a specified BRG.

ieee-address

Clears a specific host belonging to a specified BRG.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

gateway

Syntax

gateway name name

gateway [name name] tunnel [private-address-type private-address-type]

gateway [service service-id]

gateway tunnel [ip-address:port]

gateway name name tunnelip-address:port

gateway name name tunnel

gateway [name name] tunnel state state

gateway [name name] tunnel idi-value idi-prefix

gateway tunnel count

gateway tunnel [private-address-type private-address-type]

Context

[Tree] (show>ipsec gateway)

Full Context

show ipsec gateway

Description

This command displays IPsec gateway information.

Parameters

name

Specifies an IPsec gateway name.

service-id

Specifies the service ID of the default security service used by the IPsec gateway.

Values

1 to 214748364 svc-name: Up to 64 characters maximum

ip-address:port

Displays the IP address and UDP port of the SAP IPsec gateway to the tunnel.

Values

0 to 65535

state

Specifies the state of the tunnel.

Values

up, down

idi-prefix

Displays a string as an IDi prefix. With this parameter, the system lists all the peers with IDi that has specified prefixes.

count

Displays the number of IPsec gateway tunnels with the ike-policy>authmethod command set to psk.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an example output of the show ipsec gateway command.

Sample Output 
show ipsec gateway tunnel 10.2.2.100:500 
===============================================================================
IPsec Remote Users Tunnel Detail
===============================================================================
IP Addr: 10.2.2.100:500, port: 500
-------------------------------------------------------------------------------
Service Id       : 300                  Sap Id           : tunnel-1.public:100
Address          : 10.2.2.100:500
Private If       : priv
Private Address  : 10.20.20.50
Private Service  : 400                  Template Id      : 1
Replay Window    : None                 Bi Direction SA  : true
Host MDA         : 1/2                  
Match TrustAnchor: labroot              
Last Oper Changed: 05/04/2016 17:36:20  
IKE IDI Type     : derAsn1Dn            
IKE IDI Value    : CN=Client-1
-------------------------------------------------------------------------------
Dynamic Keying Parameters
-------------------------------------------------------------------------------
Transform Id1    : 1                    Transform Id2    : None
Transform Id3    : None                 Transform Id4    : None
IPsec GW Name    : rw
Local GW Address : 172.16.100.1       
Ike Policy Id    : 1                    Ike Pol Auth     : cert
Pre Shared Key   : None
Cert Profile     : segw
Trust Anchor Prof: labroot              
Selected Cert    : segw-1.cert
Selected Key     : segw-1.key
Send Chain Prof  : None
Local Id Type    : none                 
Client Database
    Name         : (Not Specified)      
    Client ID    : None                 
Radius Acct Plcy : None                 
Radius Auth Plcy : None                 
TS-List          : <none>
Certificate Status Verify
-------------------------------------------------------------------------------
Primary          : crl                  Secondary        : none
Default Result   : good                 
DHCP
-------------------------------------------------------------------------------
Admin State      : Up                   Send Release     : true
Service          : 400                  
Gi-Address       : 10.20.20.1           
Server1-Address  : 10.9.9.9             
DHCPv4 Lease
-------------------------------------------------------------------------------
Private Address    : 10.20.20.50
Acquired           : 2016/05/04 17:36:19 UTC
Renew              : 2016/05/04 18:06:19 UTC
Rebind             : 2016/05/04 18:28:49 UTC
Valid Lifetime
    End            : 2016/05/04 18:36:19 UTC
    Total          : 3600 seconds
    Remaining      : 3585 seconds
Server             : 10.9.9.9
-------------------------------------------------------------------------------
ISAKMP-SA
-------------------------------------------------------------------------------
State            : Up                   
Established      : 05/04/2016 17:36:20  Lifetime         : 86400
Expires          : 05/05/2016 17:36:20  
ISAKMP Statistics
--------------------
Tx Packets       : 2                    Rx Packets       : 2
Tx Errors        : 0                    Rx Errors        : 0
Tx DPD           : 0                    Rx DPD           : 0
Tx DPD ACK       : 0                    Rx DPD ACK       : 0
DPD Timeouts     : 0                    Rx DPD Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Inbound (index 2)
-------------------------------------------------------------------------------
SPI              : 207232               
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 05/04/2016 17:36:20  Lifetime         : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Outbound (index 1)      
-------------------------------------------------------------------------------
SPI              : 3433111520           
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 05/04/2016 17:36:20  Lifetime         : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
===============================================================================
Fragmentation Statistics
===============================================================================
Encapsulation Overhead                 : 73
Pre-Encapsulation
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
Post-Encapsulation                    
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
===============================================================================

A:vsim-2# show ipsec gateway name "rw" tunnel 10.1.1.100 
===============================================================================
IPsec Remote Users Tunnel Detail
===============================================================================
-------------------------------------------------------------------------------
IP Addr: 10.1.1.100, port: 500
-------------------------------------------------------------------------------
Service Id       : 300                  Sap Id           : tunnel-1.public:100
Address          : 10.1.1.100
Private If       : priv
Private Address  : 10.20.20.50
Private Service  : 400                  Template Id      : 1
Replay Window    : None                 Bi Direction SA  : true
Host MDA         : 1/2                  
Match TrustAnchor: labroot              
Last Oper Changed: 12/14/2016 22:17:05  
IKE IDI Type     : derAsn1Dn            
IKE IDI Value    : CN=Client-1
TS List          : <none>
Pre-Shared Key   : <none>
IKE Policy       : (Not Specified)      
TCP MSS
    Public       : N/A                  
    Private      : 1200 octets          
-------------------------------------------------------------------------------
Dynamic Keying Parameters
-------------------------------------------------------------------------------
Transform Id1    : 1                    Transform Id2    : None
Transform Id3    : None                 Transform Id4    : None
IPsec GW Name    : rw
Local GW Address : 172.16.100.1
Ike Policy Id    : 1                    Ike Pol Auth     : cert
Cert Profile     : segw
Trust Anchor Prof: labroot              
Selected Cert    : segw-1.cert
Selected Key     : segw-1.key
Send Chain Prof  : None
Local Id Type    : none                 
Client Database
    Client Index : None                 
Radius Acct Plcy : None                 
Radius Auth Plcy : None                 
Certificate Status Verify
-------------------------------------------------------------------------------
Primary          : crl                  Secondary        : none
Default Result   : good                 
                                      
DHCP
-------------------------------------------------------------------------------
Admin State      : Up                   Send Release     : true
Service          : 400                  
Gi-Address       : 10.20.20.1           
Server1-Address  : 10.9.9.9             
DHCPv4 Lease
-------------------------------------------------------------------------------
Private Address    : 10.20.20.50
Acquired           : 2016/12/14 22:17:04 UTC
Renew              : 2016/12/14 22:47:04 UTC
Rebind             : 2016/12/14 23:09:34 UTC
Valid Lifetime
    End            : 2016/12/14 23:17:04 UTC
    Total          : 3600 seconds
    Remaining      : 3580 seconds
Server             : 10.9.9.9
-------------------------------------------------------------------------------
ISAKMP-SA
-------------------------------------------------------------------------------
State            : Up                   
Established      : 12/14/2016 22:17:04  Lifetime         : 86400
Expires          : 12/15/2016 22:17:04  
ISAKMP Statistics
--------------------
Tx Packets       : 2                    Rx Packets       : 2
Tx Errors        : 0                    Rx Errors        : 0
Tx DPD           : 0                    Rx DPD           : 0
Tx DPD ACK       : 0                    Rx DPD ACK       : 0
DPD Timeouts     : 0                    Rx DPD Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Inbound (index 2)
-------------------------------------------------------------------------------
SPI              : 322790               
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 12/14/2016 22:17:05  Lifetime         : 3600
Local Traffic Selectors:
172.16.100.1-172.16.100.1
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Outbound (index 1)
-------------------------------------------------------------------------------
SPI              : 3462984686           
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 12/14/2016 22:17:05  Lifetime         : 3600
Local Traffic Selectors:
172.16.100.1-172.16.100.1
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
===============================================================================
Fragmentation Statistics
===============================================================================
Encapsulation Overhead                 : 73
Pre-Encapsulation
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
Post-Encapsulation
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
===============================================================================
===============================================================================

gateway

Syntax

gateway name name tunnel ip-address:port [statistics] [saved-key]

gateway name name tunnel ip-address:port [temp-mtu]

gateway name name [saved-key]

gateway name name tunnel ip-address:port [saved-key]

Context

[Tree] (clear>ipsec gateway)

Full Context

clear ipsec gateway

Description

This command clears dynamic IPsec tunnel states.

The system clears the statistics counter for the specified tunnel when the statistics parameter option is specified.

The system clears the saved IKE and ESP keys for the specified tunnel, or for all tunnels on the specified gateway if no tunnel is specified when the saved-key parameter option is specified.

The system removes the specified tunnel when the statistics, saved-key, or temp-mtu parameters are not specified.

Parameters

name

Specifies the name of the IPsec GW, up to 32 characters.

ip-address

Specifies the IP address and port of the remote peer.

Values

<ip-address>

ip-address

a.b.c.d

ipv6-address

x:x:x:x:x:x:x:x

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D
port

Specifies the port of the remote peer. The specifies channel is cleared if the statistics, saved-key, or temp-mtu parameters are not specified.

Values

0 to 65535

statistics

Clears the stats counter.

saved-key

Clears the saved IKE and ESP keys.

temp-mtu

Clears temporary MTU learned from MTU propagation for the specified tunnel.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

gateways

gateways

Syntax

gateways

gateways brg-profile profile-name

Context

[Tree] (show>subscr-mgmt>vrgw>brg gateways)

Full Context

show subscriber-mgmt vrgw brg gateways

Description

This command lists operational gateway information for all BRGs active on the system. This list can optionally be reduced by specifying a BRG profile.

Parameters

profile-name

Specifies the name of the BRG profile to filter.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of BRG gateway information.

Sample Output 
Node# show subscriber-mgmt brg gateways
===============================================================================
Bridged Residential Gateways
===============================================================================
Identifier                   : 00:00:00:00:00:05
SLAAC prefix                 : 3ffe:0:0:5::/64
Subnet                       : 21.0.0.1/24
Subnet start address         : 21.0.0.20
Subnet end address           : 21.0.0.40
DMZ address                  : (Not Specified)
DNS 1 v4                     : (Not Specified)
DNS 1 v6                     : (Not Specified)
DNS 2 v4                     : (Not Specified)
DNS 2 v6                     : (Not Specified)
NBNS 1                       : (Not Specified)
NBNS 2                       : (Not Specified)
DHCP lease time              : 600
DHCP stream destination      : (Not Specified)
IPv4 portal URL              : (Not Specified)
IPv6 portal URL              : (Not Specified)
BRG profile                  : brg
Subscriber profile           : subprof_mig_4
SLA profile                  : (Not Specified)
UPnP policy override         : (Not Specified)
DMZ address in use           : no
Proxy authenticated          : yes
Ingress IPv4 filter override : N/A
Egress IPv4 filter override  : N/A
Ingress IPv6 filter override : N/A
Egress IPv6 filter override  : N/A
No QoS overrides found.
No Filter rules received.
-------------------------------------------------------------------------------
No. of gateways: 1
===============================================================================

generate-key

generate-key

Syntax

generate-key authentication authentication-protocol authentication-password [privacy privacy-protocol privacy-password] [engine-id identifier]

Context

[Tree] (tools>perform>system>mgmt-itf>snmp generate-key)

Full Context

tools perform system managment-interface snmp generate-key

Description

This command generates localized SNMPv3 authentication and privacy keys, which are a hash of the SNMP engine ID and a password. The SNMP engine ID can be displayed with the show system information | match "SNMP Engine ID" command and does not need to be entered. If keys are being generated for a different system, its SNMP engine ID must be specified.

Parameters

authentication

Generates a localized authentication key.

authentication-protocol

Specifies the SNMPv3 authentication protocol.

Values

hmac-md5-96 — Specifies use of the HMAC-MD5-96 authentication protocol.

hmac-sha1-96 — Specifies use of the HMAC-SHA-96 authentication protocol.

hmac-sha2-224 — Specifies use of the HMAC-SHA-224 authentication protocol.

hmac-sha2-256 — Specifies use of the HMAC-SHA-256 authentication protocol.

hmac-sha2-384 — Specifies use of the HMAC-SHA-384 authentication protocol.

hmac-sha-512 — Specifies use of the HMAC-SHA-512 authentication protocol.

authentication-password

Specifies the password used to generate the authentication key.

privacy

Keyword to generate a localized privacy key.

privacy-protocol

Specifies the SNMPv3 privacy protocol.

Values

cbc-des — Specifies the use of the CBC-DES privacy protocol. This parameter is not available in FIPS-140-2 mode.

cfb128-aes-128 — Specifies the use of the CFB128-AES-128 privacy protocol.

cfb128-aes-192 — Specifies the use of the CFB128-AES-192 privacy protocol.

cfb128-aes-256 — Specifies the use of the CFB128-AES-256 privacy protocol.

privacy-password

Specifies the privacy password used to generate the privacy key.

engine-id identifier

Keyword that specifies the SNMP engine ID. The identifier must be a hexadecimal string between 10 and 64 digits in length.

Output

The following output is an example of a generated authentication and privacy key.

Sample Output 
A:ALA-1# tools perform system management-interface snmp generate-key authentication hmac-sha2-512 thisistheauthenticationpassword privacy cfb128-aes-256
thisistheprivacypassword
Authentication :
a764a7fa90099fb179266e2b400a225e3f0960a842fc55704e5b2eb0750bd6a2ca0ed8450b5b57b41f50
fab253961ee698bfc272a71bcc919420c603cef5e628
Privacy        : 94560a59230f63241fd596b920cfe2e703f60a8ea0c7c341a913f8d3a46f2256
SNMP Engine ID : 0000197f0000b65dff000000

global

global

Syntax

global

Context

[Tree] (clear>redundancy>multi-chassis>mcr>statistics global)

Full Context

clear redundancy multi-chassis mc-ring statistics global

Description

This command clears multi-chassis ring global statistics.

Platforms

All

gmpls

gmpls

Syntax

gmpls

Context

[Tree] (show>router gmpls)

Full Context

show router gmpls

Description

This command displays RSVP status information for the GMPLS instance of RSVP.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

gmpls

Syntax

gmpls

Context

[Tree] (clear>router gmpls)

Full Context

clear router gmpls

Description

Commands in this context clear and reset GMPLS entities and statistics.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

gmpls

Syntax

gmpls

Context

[Tree] (tools>dump>router gmpls)

Full Context

tools dump router gmpls

Description

This command dumps tools for the GMPLS Protocol instance.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

gmpls-tun-grp

gmpls-tun-grp

Syntax

gmpls-tun-grp gmpls-tunnel-group-id

Context

[Tree] (clear gmpls-tun-grp)

Full Context

clear gmpls-tun-grp

Description

Commands in this context clear the GMPLS tunnel group information.

Parameters

gmpls-tunnel-group-id

Specifies the GMPLS tunnel group ID.

Values

1 to 1024

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

gmpls-tun-grp

Syntax

gmpls-tun-grp [gmpls-tunnel-group-id] [statistics]

Context

[Tree] (show gmpls-tun-grp)

Full Context

show gmpls-tun-grp

Description

This command displays GMPLS tunnel group status and lists the gLSPs bound to each tunnel group.

Parameters

gmpls-tunnel-group-id

Specifies that only GMPLS tunnel groups of the configured ID are displayed.

Values

1 to 1024

statistics

Keyword to display GMPLS tunnel group statistics.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

gmpls-tun-grp

Syntax

gmpls-tun-grp gmpls-tunnel-group-id [clear]

Context

[Tree] (tools>dump gmpls-tun-grp)

Full Context

tools dump gmpls-tun-grp

Description

This command dumps information about a GMPLS tunnel group.

Parameters

gmpls-tunnel-group-id

The identifier of the GMPLS tunnel group.

Values

1 to 1024

clear

Keyword to clear statistics after reading.

Platforms

7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of GMPLS tunnel group information.

Sample Output 
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1
 
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 192.0.2.01, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:12.970
  memId 1: (Up/Dn), session: 1::1, reg: Y
     DnReasons: wpLspDn
   Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
    lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
  memId 2: (Up/Up), session: 1::empty, reg: Y
   Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
  memId 3: (Up/Up), session: 2::empty, reg: Y
   Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
  memId 4: (Up/Up), session: 3::empty, reg: Y
   Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
  memId 5: (Up/Up), session: 4::empty, reg: Y
   Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
 
  Sorted list of 4 member port(s):
  1/1/13 1/1/14 1/2/1 1/2/2

*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1
clear
 
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1 clear
 
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 192.0.2.01, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:20.390
  memId 1: (Up/Dn), session: 1::1, reg: Y
     DnReasons: wpLspDn
   Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
    lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
  memId 2: (Up/Up), session: 1::empty, reg: Y
   Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
  memId 3: (Up/Up), session: 2::empty, reg: Y
   Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
  memId 4: (Up/Up), session: 3::empty, reg: Y
   Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
  memId 5: (Up/Up), session: 4::empty, reg: Y
   Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
 
  Sorted list of 4 member port(s):
  1/1/13 1/1/14 1/2/1 1/2/2

gre-eth-bridged

gre-eth-bridged

Syntax

gre-eth-bridged

Context

[Tree] (show>service>system gre-eth-bridged)

Full Context

show service system gre-eth-bridged

Description

This command displays GRE Ethernet bridged service information.

Platforms

All

gre-tunnel-template

gre-tunnel-template

Syntax

gre-tunnel-template [gre-tunnel-template-name [ associations]]

Context

[Tree] (show>filter gre-tunnel-template)

Full Context

show filter gre-tunnel-template

Description

This command displays GRE tunnel template information.

Parameters

gre-tunnel-template-name

Specifies a GRE tunnel template name, up to 32 characters.

associations

Appends association information.

Platforms

All

Output

The following output is an example of GRE tunnel template information.

Sample Output 
*A:node-3# show filter gre-tunnel-template "GRE-tunnels" associations
===============================================================================
GRE tunnel template
===============================================================================
GRE Tunnel template : GRE-tunnels                Applied      : No
Description         : 10.20.1.5
GRE key             : if-index
Skip ttl decrement  : No
Source address      : 10.20.1.3
Destination address : 10.20.1.2
Destination address : 10.20.1.5
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No associations found
===============================================================================
*A:node-3#

gre-tunnel-template

Syntax

gre-tunnel-template

Context

[Tree] (tools>dump>filter>resources gre-tunnel-template)

Full Context

tools dump filter resources gre-tunnel-template

Description

This command displays how many GRE tunnel templates are configured.

Platforms

All

Output

The following output is an example of filter resource GRE tunnel templates information.

Sample Output 
*A:Dut-C# tools dump filter resources gre-tunnel-template
 
===============================================================================
Filter - GRE tunnel template resources
===============================================================================
Used  : 1024
Free  : 0
Total : 1024
===============================================================================

group

group

Syntax

group [tunnel-group-name [statistics]]

Context

[Tree] (show>router>l2tp group)

Full Context

show router l2tp group

Description

This command displays L2TP group operational information.

Parameters

tunnel-group-name

Displays information for the specified tunnel group.

statistics

Displays statistics for the specified tunnel group.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of L2TP group operational information.

Sample Output 
*A:Dut-C# show router l2tp group 
===============================================================================
L2TP Groups
===============================================================================
Group Name       Ses Limit Ses Assign    State  Tun Active Ses Active
                                                          Tun Total  Ses Total 
-------------------------------------------------------------------------------
isp1.group-1
                       131071    existingFirst active     1          1         
                                                          1          1         
isp1.group-2
                       131071    weighted      active     2          5         
                                                          3          8         
-------------------------------------------------------------------------------
No. of L2TP Groups: 2
===============================================================================
*A:Dut-C#

*A:Dut-C# show router l2tp group isp1.group-2 
===============================================================================
Group Name: isp1.group-2
===============================================================================
Conn ID                       Loc-Tu-ID Rem-Tu-ID State              Ses Active
  Group                                                              Ses Total  
    Assignment
-------------------------------------------------------------------------------
143523840                     2190      17525     established        2         
  isp1.group-2                                                       3          
    isp1.tunnel-3
236912640                     3615      58919     closedByPeer       0         
  isp1.group-2                                                       2          
    isp1.tunnel-2
658178048                     10043     33762     draining           3         
  isp1.group-2                                                       3          
    isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 3
===============================================================================
*A:Dut-C#

*A:Dut-C# show router l2tp group isp1.group-2 statistics  
Group Name: isp1.group-2
-------------------------------------------------------------------------------
              Attempts   Failed     Failed-Aut            Active     Total     
-------------------------------------------------------------------------------
Tunnels       3          0          0                     2          3         
Sessions      8          0          N/A                   5          8         
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
              Pkt-Ctl               Pkt-Err               Octets               
-------------------------------------------------------------------------------
Rx            51                    0                     1224                 
Tx            51                    0                     2796                 
-------------------------------------------------------------------------------
*A:Dut-C#

group

Syntax

group tunnel-group-name

Context

[Tree] (clear>router>l2tp group)

Full Context

clear router l2tp group

Description

This command clears L2TP data.

Parameters

tunnel-group-name

Specifies a L2TP tunnel group name.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

group

Syntax

group tunnel-group-name

Context

[Tree] (tools>perform>router>l2tp group)

Full Context

tools perform router l2tp group

Description

Commands in this context configure performance tools for L2TP tunnel group.

Parameters

tunnel-group-name

Specifies the tunnel group name, up to 63 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

group

Syntax

group [grp-ip-address] [hosts | interfaces | saps]

group summary [hosts | interfaces | saps]

Context

[Tree] (show>router>igmp group)

Full Context

show router igmp group

Description

This command displays the multicast group and (S,G) addresses. If no grp-ip-address parameters are specified, then all IGMP group, (*,G) and (S,G) addresses are displayed.

Parameters

grp-ip-address

Displays specific multicast group addresses.

hosts

Displays hosts for the multicast group address.

interfaces

Displays interfaces for the multicast group address.

saps

Displays SAPs for the multicast group address.

Platforms

All

Output

The following is an example of IGMP group information. IGMP Group Information Output Fields describes the output fields for IGMP group information.

Sample Output 
*B:Dut-C# show router igmp group 
===============================================================================
IGMP Interface Groups
===============================================================================
===============================================================================
IGMP Host Groups
===============================================================================
(*,239.0.0.1)
    Fwd List  : 239.112.1.2            Up Time : 0d 00:00:21
(10.11.0.1,239.0.0.1)
    Fwd List  : 239.112.1.1            Up Time : 0d 00:00:30
    Blk List  : 239.112.1.2            Up Time : 0d 00:00:21
(10.11.0.2,239.0.0.1)
    Fwd List  : 239.112.1.1            Up Time : 0d 00:00:30
(*,239.0.0.2)
    Fwd List  : 239.112.1.2            Up Time : 0d 00:00:21
(10.11.0.1,239.0.0.2)
    Blk List  : 239.112.1.2            Up Time : 0d 00:00:21
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 5
===============================================================================
*B:Dut-C# 

*B:Dut-C# show router igmp group summary 
===============================================================================
IGMP Interface Groups
===============================================================================
===============================================================================
IGMP Host Groups Summary          Nbr Fwd Hosts          Nbr Blk Hosts
===============================================================================
(*,239.0.0.1)                     1                      0
(10.11.0.1,239.0.0.1)             1                      1
(10.11.0.2,239.0.0.1)             1                      0
(*,239.0.0.2)                     1                      0
(10.11.0.1,239.0.0.2)             0                      1
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 5
===============================================================================
*B:Dut-C# 

A:NYC# show router igmp group 239.24.24.24
===============================================================================
IGMP Groups
===============================================================================
(*,239.24.24.24)                       Up Time : 0d 05:23:23
    Fwd List  : nyc-vlc
-------------------------------------------------------------------------------
(*,G)/(S,G) Entries : 1
===============================================================================
A:NYC#
Table 1. IGMP Group Information Output Fields

Label

Description

IGMP Groups

The IP multicast sources corresponding to the IP multicast groups.

Fwd List

The list of interfaces in the forward list.

Blk List

The list of interfaces in the blocked list.

group

Syntax

group [grp-ip-address] [source ip-address] [type { starg | sg}] [detail] [ family]

Context

[Tree] (show>service>id>pim-snooping group)

Full Context

show service id pim-snooping group

Description

This command displays the multicast group information.

Parameters

grp-ip-address

Specifies the IP multicast group address for which this entry contains information

ip-address

Specifies the source address for which this entry contains information.

starg

Specifies that only (*,G) entries be displayed

sg

Specifies that only (S,G) entries be displayed

detail

Displays detailed group information.

family

Displays either IPv4 or IPv6 information.

Values

ipv4 or ipv6

Platforms

All

Output

The following output is an example of service PIM snooping information.

Sample Output 
*A:PE# show service id 1 pim-snooping group
===============================================================================
PIM Snooping Groups ipv4
===============================================================================
Group Address           Source Address          Type     Incoming          Num
                                                         Intf              Oifs
-------------------------------------------------------------------------------
239.252.0.1             10.0.0.2                (S,G)    SAP:1/1/2         2
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:PE#

group

Syntax

group [name] [detail]

Context

[Tree] (show>router>bgp group)

Full Context

show router bgp group

Description

This command displays group information for a BGP peer group. This command can be entered with or without parameters.

When this command is issued without a group name, information about all peer groups displays.

When the command is issued with a specific group name, information only pertaining to that specific peer group displays.

The ‟State” field displays the BGP group’s operational state. Other valid states are:

  • Up - BGP global process is configured and running.

  • Down - BGP global process is administratively shutdown and not running.

  • Disabled - BGP global process is operationally disabled. The process must be restarted by the operator.

Parameters

name

Displays information for the specified BGP group, up to 64 characters.

detail

Displays detailed information.

Platforms

All

Output

The following outputs are example of BGP group information, and Standard and Detailed Group Field Descriptions describes the output fields.

Sample Output 
*A:Dut-B#
*A:Dut-B# show router bgp group
===============================================================================
BGP Group
===============================================================================
-------------------------------------------------------------------------------
Group : abc
-------------------------------------------------------------------------------
Description : (Not Specified)
Group Type : No Type State : Down
Peer AS : n/a Local AS : 0
Local Address : n/a Loop Detect : Ignore
Import Policy : None Specified - Default Accept
Export Policy : None Specified - Default Accept
Hold Time : 90 Keep Alive : 30
Min Hold Time : 0
Cluster Id : None Client Reflect : Enabled
NLRI : Unicast Preference : 170
TTL Security : Disabled Min TTL Value : n/a
Graceful Restart : Disabled Stale Routes Time: n/a
Restart Time : n/a
Auth key chain : n/a
Bfd Enabled : Disabled Disable Cap Nego : Disabled
Creation Origin : manual
Default Route Tgt: Disabled
Aigp Metric : Disabled
Split Horizon : Disabled
Damp Peer Oscill*: Disabled
GR Notification : Disabled Fault Tolerance : Disabled
Next-Hop Unchang*: None
Routes Resolve T*: Disabled
Egress Engineeri*: Enabled
List of Static Peers
- 1.1.1.1 :
List of Dynamic Peers
Total Peers : 1 Established : 0
-------------------------------------------------------------------------------
Peer Groups : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B#
*A:Dut-B#
Sample Output (7450 ESS and 7750 SR) 
*A:ALA-12# show router 3 bgp group
===============================================================================
BGP Groups 
===============================================================================
Group            : To_AS_40000                     
-------------------------------------------------------------------------------
Description      : Not Available
Group Type       : No Type              State            : Up                  
Peer AS          : 40000                Local AS         : 65206               
Local Address    : n/a                  Loop Detect      : Ignore              
Export Policy    : direct2bgp                                                 
Hold Time        : 90                   Keep Alive       : 30                  
Cluster Id       : None                 Client Reflect   : Enabled             
NLRI             : Unicast              Preference       : 170                 
 
List of Peers
- 10.0.0.1       : To_Jukebox
- 10.0.0.12      : Not Available
- 10.0.0.13      : Not Available
- 10.0.0.14      : To_ALA-1
- 10.0.0.15      : To_H-215
Total Peers      : 5                    Established      : 2                   
===============================================================================
*A:ALA-12#
Table 2. Standard and Detailed Group Field Descriptions

Label

Description

Group

BGP group name

Group Type

No Type — Peer type not configured

External — Peer type configured as external BGP peers

Internal — Peer type configured as internal BGP peers

State

Disabled — The BGP peer group has been operationally disabled

Down — The BGP peer group is operationally inactive

Up — The BGP peer group is operationally active

Peer AS

The configured or inherited peer AS for the specified peer group

Local AS

The configured or inherited local AS for the specified peer group

Local Address

The configured or inherited local address for originating peering for the specified peer group

Loop Detect

The configured or inherited loop detect setting for the specified peer group

Connect Retry

The configured or inherited connect retry timer value

Authentication

n/a — No authentication is configured

MD5 — MD5 authentication is configured

Local Pref

The configured or inherited local preference value

MED Out

The configured or inherited MED value assigned to advertised routes without a MED attribute

Min Route Advt.

The minimum amount of time that must pass between route updates for the same IP prefix

Min AS Originate

The minimum amount of time that must pass between updates for a route originated by the local router

Multihop

The maximum number of router hops a BGP connection can traverse

Multipath

The configured or inherited multipath value, determining the maximum number of ECMP routes BGP can advertise to the RTM

Prefix Limit

No Limit — No route limit assigned to the BGP peer group

1 to 4294967295 — The maximum number of routes BGP can learn from a peer

Passive

Disabled — BGP attempts to establish BGP connections with neighbors in the specified peer group

Enabled — BGP does actively attempt to establish BGP connections with neighbors in the specified peer group

Next Hop Self

Disabled — BGP is not configured to send only its own IP address as the BGP nexthop in route updates to neighbors in the peer group

Enabled — BGP sends only its own IP address as the BGP nexthop in route updates to neighbors in the specified peer group

Aggregator ID 0

Disabled — BGP is not configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group

Enabled — BGP is configured to set the aggregator ID to 0.0.0.0 in all originated route aggregates sent to the neighbor in the peer group

Remove Private

Disabled — BGP will not remove all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group

Enabled — BGP removes all private AS numbers from the AS path attribute in updates sent to the neighbor in the peer group

Damping

Disabled — The peer group is configured not to dampen route flaps

Enabled — The peer group is configured to dampen route flaps

Export Policy

The configured export policies for the peer group

Import Policy

The configured import policies for the peer group

Hold Time

The configured hold time setting

Keep Alive

The configured keepalive setting

Cluster Id

n/a — No cluster ID has been configured

Client Reflect

Disabled — The BGP route reflector will not reflect routes to this neighbor

Enabled — The BGP route reflector is configured to reflect routes to this neighbor

NLRI

The type of NLRI information that the specified peer group can accept

Unicast — IPv4 unicast routing information can be carried

Preference

The configured route preference value for the peer group

Egress Engineering

Enabled — EPE is enabled for the peer group

Disabled — EPE is disabled for the peer group

List of Peers

A list of BGP peers configured under the peer group

Total Peers

The total number of peers configured under the peer group

Established

The total number of peers that are in an established state

group

Syntax

group aa-group-id [:partition-id]

Context

[Tree] (show>app-assure group)

Full Context

show application-assurance group

Description

Commands in this context display application-assurance group information.

Parameters

aa-group-id

Specifies an AA ISA group ID.

Values

1

partition-id

Specifies a partition within a group.

Values

1 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output displays application assurance group information.

Sample Output 
*A:Dut-C#  /show application-assurance group 1:1 aa-sub esm Subscriber1 summary 
===============================================================================
Application-Assurance Subscriber Summary (realtime)
===============================================================================
AA-Subscriber           : Subscriber1 (esm)
ISA assigned            : esa-1/1
App-Profile             : dpi
App-Profile divert      : Yes
Capacity cost           : 1
Aarp Instance Id        : N/A
Sub-quarantined         : No
HTTP URL Parameters     : (Not Specified)
Last HTTP Notified Time : N/A
SAP                     : 6/1/5:1
MAC                     : c2:4d:ff:8a:b2:cc
Circuit Id : (Not Specified)
Remote Id  : (Not Specified)
Tethering Status        : not-detected (disabled)
Devices Detected        : N/A
Sub Congestion State    : Not Congested|RTT Limits Exceeded (Stage X)

group

Syntax

group aa-group-id resources

Context

[Tree] (tools>dump>application-assurance group)

Full Context

tools dump application-assurance group

Description

This command dumps application-assurance information within a group.

Parameters

aa-group-id

Specifies the AA group identifier.

Values

aa-group-id: partion:aa-group-id[:partition-id]

aa-group-id: 1 to 255

resources

Specifies the AA group resources.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output displays group resources information.

Sample Output 

*A:Dut-C# tools dump application-assurance group 1 resources     
========================================================================================================
Application-Assurance Group 1 Resource Usage and Limits
========================================================================================================
Partitioned             :  No
AA-Sub-Scale            :  residential
Minimum-ISA-Generation  :  1
--------------------------------------------------------------------------------------------------------
mda  mda-type  Status  aa-subs  aa-sub  flow-records  ip    transit-prefix-entries   capacity quarantined
                                stats   current limit addresses ipv4 v4-rm ipv6 v6-rm cost    aa-subs
--------------------------------------------------------------------------------------------------------
5/1  isa2-aa   up/active  9     162     0       20480  0         0   0     0    0     9       1
Mda Limit                 1024  32768   n/a     n/a    16384     0   0     0    0     n/a     100
--------------------------------------------------------------------------------------------------------
Resource                                                   Current          Limit            
------------------------------------------------------------------------------------------------------
Control     Certificate Profiles                         : 0                20               
Control     DNS IP Cache                                 : 0                128              
Control     DNS IP Cache Domain Entries                  : 0                4096             
Control     DNS IP Cache Entries                         : 0                65536            
Control     Event Logs                                   : 0                1                
Control     Event Log Entries                            : 0                100000           
Control     GTP Filter                                   : 0                128              
Control     HTTP Enrichment                              : 0                128              
Control     HTTP Error Redirect                          : 0                1                
Control     HTTP Notification                            : 0                8                
Control     HTTP Redirect                                : 0                128              
Control     IP Prefix Lists                              : 0                1000             
Control     IP Prefix Lists Entries                      : 0                24000            
Control     SCTP Filter                                  : 0                128              
Control     Session Filter                               : 0                300              
Control     Session Filter Entries                       : 0                6000             
Control     URL Filter                                   : 0                4                
Control     URL List                                     : 0                3                
Control     URL List Entries (standard)                  : 0                450              
Control     URL List Entries (extended)                  : 0                2000             
Control     IP Port Lists                                : 0                100              
Control     IP Port Lists Entries                        : 0                3200             
Control     TCP Validate                                 : 0                128              
Control     TCP Optimizer                                : 0                128              
Control     Multi-path TCP Proxies                       : 0                4                
------------------------------------------------------------------------------------------------------
Policer     System Level Single Bucket BW Policers       : 0                128              
Policer     System Level Flow Count Limit Policers       : 0                128              
Policer     System Level Flow Rate Limit Policers        : 0                128              
Policer     Subscriber Level Single Bucket BW Policers   : 0                5000             
Policer     Subscriber Level Dual Bucket BW Policers     : 0                5000             
Policer     Subscriber Level Flow Count Limit            : 0                5000             
Policer     Subscriber Level Flow Rate Limit             : 0                5000             
Policer     All Policer Types For Group                  : 0                5000             
Policer     Time-Of-Day Overrides For Group              : 0                384              
------------------------------------------------------------------------------------------------------
Policy      Protocols                                    : 247              -                
Policy      Custom Protocols                             : 0                10               
Policy      Custom Protocol Expressions                  : 0                10               
Policy      Charging Groups                              : 0                32               
Policy      Application Groups                           : 1                32               
Policy      Applications                                 : 1                500              
Policy      Application Filters                          : 0                2500             
Policy      Application Filter Expressions               : 0                2500             
Policy      Application Service Options Characteristics  : 0                32               
Policy      Application Service Options Values           : 0                256              
Policy      Application Profiles                         : 0                100              
Policy      Application QoS Policies                     : 0                1000             
Policy      AQP ASO Matches                              : 0                2000             
Policy      AQP Subscriber Matches                       : 0                100              
Policy      Subscriber HTTP URL Parameters               : 0                -                
-------------------------------------------------------------------------------------------------------
Statistics  Subscriber Statistics                        : 0                512              
Statistics  Subscriber Statistics Exported by RADIUS     : 0                64               
Statistics  Special Study Protocol Subscribers           : 0                100              
Statistics  Special Study Application Subscribers        : 0                100              
-------------------------------------------------------------------------------------------------------

group

Syntax

group aa-group-id [: partition-id]

Context

[Tree] (tools>dump>application-assurance group)

Full Context

tools dump application-assurance group

Description

This command dumps application-assurance information within a group/partition.

Parameters

aa-group-id

Specifies the AA group identifier.

Values

aa-group-id:

partion:aa-group-id[:partition-id]

aa-group-id

1 to 255

partition-id

1 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group

Syntax

group aa-group-id load-balance [service service-id]

Context

[Tree] (tools>perform>app-assure group)

Full Context

tools perform application-assurance group

Description

This command performs application assurance group operations.

Parameters

aa-group-id

Specifies the application assurance group ID.

Values

1 to 255

load-balance

Load balances subscribers within the group.

service service-id

Load balances the specified service.

Values

1 to 2148278381, svc-name (up to 64 char max.)

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group

Syntax

group [grp-ipv6-address] [hosts | interfaces | saps]

group summary [hosts | interfaces | saps]

Context

[Tree] (show>router>mld group)

Full Context

show router mld group

Description

This command displays the multicast group and (S,G) addresses. If no grp-ipv6-address parameters are specified, then all MLD group, (*,G) and (S,G) addresses are displayed.

Parameters

grp-ipv6-address

Displays specific multicast group addresses.

hosts

Displays hosts for the multicast group address.

interfaces

Displays interfaces for the multicast group address.

saps

Displays SAPs for the multicast group address.

Platforms

All

Output

The following is an example of MLD group information. MLD Group Information Output Fields describes the output fields for MLD group information.

Sample Output 
*A:Dut-A# show router mld group
===============================================================================
MLD Interface Groups
===============================================================================
(*,ff04:db8:224:100:0:0)                                     UpTime: 0d
00:10:09
     Fwd List  : intf_to_ixia
(*,ff04:db8:224:100:0:1)                                     UpTime: 0d
00:10:09
     Fwd List  : intf_to_ixia
(*,ff04:db8:224:100:0:2)                                     UpTime: 0d
00:10:09
     Fwd List  : intf_to_ixia
(*,ff04:db8:224:100:0:3)                                     UpTime: 0d
00:10:09
     Fwd List  : intf_to_ixia
(*,ff04:db8:224:100:0:4)                                     UpTime: 0d
00:10:09
     Fwd List  : intf_to_ixia
-------------------------------------------------------------------------------
Entries : 5
===============================================================================
MLD Host Groups
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#

*A:Dut-A# show router mld group summary
===============================================================================
MLD Interface Groups Summary                              Nbr Fwd    Nbr Blk
===============================================================================
(*,ff04:db8:224:100:0:0) 1          0
(*,ff04:db8:224:100:0:1) 1          0
(*,ff04:db8:224:100:0:2) 1          0
(*,ff04:db8:224:100:0:3) 1          0
(*,ff04:db8:224:100:0:4) 1          0
-------------------------------------------------------------------------------
Entries : 5
===============================================================================
MLD Host Groups Summary                                   Nbr Fwd    Nbr Blk
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups Summary                                    Nbr Fwd    Nbr Blk
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#

*A:Dut-A# show router mld group ff04:db8:224:100:0:0 
===============================================================================
MLD Interface Groups
===============================================================================
(*,ff04:db8:224:100:0:0)                                     UpTime: 0d
00:10:24
     Fwd List  : intf_to_ixia
-------------------------------------------------------------------------------
Entries : 1
===============================================================================
MLD Host Groups
===============================================================================
No Matching Entries
===============================================================================
MLD SAP Groups
===============================================================================
No Matching Entries
===============================================================================
*A:Dut-A#
Table 3. MLD Group Information Output Fields

Label

Description

MLD Groups

The IP multicast sources corresponding to the IPv6 multicast groups.

Fwd List

The list of interfaces in the forward list.

Blk List

The list of interfaces in the blocked list.

group

Syntax

group [group-name] [detail]

Context

[Tree] (show>router>msdp group)

Full Context

show router msdp group

Description

This command displays information about MSDP groups.

Parameters

group-name

Displays information about the specified group name, up to 32 characters. If no group-name is specified, information about all group names display.

detail

Displays detailed MSDP group information.

Platforms

All

Output

The following is an example of MSDP group information. MSDP Group Fields provides MSDP group field descriptions.

Sample Output 
*A:ALA-48>show>router>msdp# group
===============================================================================
MSDP Groups
===============================================================================
Group Name                        Mode       Act Srcs  Local Address          
-------------------------------------------------------------------------------
main                              Mesh-group None None                   
loop1                             Mesh-group None None                   
loop2                             Mesh-group None None                   
loop3                             Mesh-group None None                   
loop4                             Mesh-group None None                   
loop5                             Mesh-group None None                   
-------------------------------------------------------------------------------
Groups : 6
=======================
*A:ALA-48>show>router>msdp# 


*A:ALA-48>show>router>msdp# group test
===============================================================================
MSDP Groups
===============================================================================
Group Name                        Mode       Act Srcs  Local Address
-------------------------------------------------------------------------------
test                              Mesh-group 50000     10.10.10.103
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>show>router>msdp#


*A:ALA-48>show>router>msdp# group test detail
===============================================================================
MSDP Groups
===============================================================================
Group Name         : test
-------------------------------------------------------------------------------
Local Address      : 10.10.10.103
Admin State        : Up                 Receive Msg Rate   : None
Receive Msg Time   : None               Receive Msg Thd    : None
Mode               : Mesh-group         SA Limit           : 50000
Export Policy      : None Specified / Inherited
Import Policy      : None Specified / Inherited

-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:ALA-48>show>router>msdp#
Table 4. MSDP Group Fields

Label

Description

Group Name

The MSDP group name.

Mode

The groups of peers in a full mesh topology to limit excessive flooding of source-active messages to neighboring peers.

Act Srcs

The configured maximum number of active source messages that will be accepted by MSDP.

Local Address

The local end of a MSDP session.

Admin State

The administrative state.

Receive Msg Rate

Displays rate that the messages are read from the TCP session.

Receive Msg Time

The time of MSDP messages that are read from the TCP session within the configured number of seconds.

Receive Msg Thd

The configured threshold number of MSDP messages can be processed before the MSDP message rate limiting function.

SA Limit

The source-active limit.

group

Syntax

group grp-ip-address [source ip-address [type {starstarrp | starg | sg}] [detail] [family]

group grp-ip-address [source ip-address [type {starstarrp | starg | sg}] [detail] [family] rpfv

Context

[Tree] (show>router>pim group)

Full Context

show router pim group

Description

This command displays PIM source group database information.

Parameters

grp-ip-address

Specifies the IP multicast group address for which this entry contains information.

source ip-address

Specifies the source address for which this entry contains information.

type starstarrp

Specifies that only (*, *, rp) entries are displayed.

type starg

Specifies that only (*,G) entries are displayed.

type sg

Specifies that only (S,G) entries are displayed.

detail

Displays detailed group information.

family

Displays family information.

Values

ipv4, ipv6

rpfv

Displays proxy RPF vectors that are used for inter-AS Rosen MVPN.

Platforms

All

Output

The following displays an example of PIM group information. PIM Group Fields provides PIM group field descriptions.

Sample Output 
A:Dut-A# show router pim group
===============================================================================
PIM Group ipv4
===============================================================================
Group Address               Type               Spt Bit Inc Intf         no.Oifs
 Source Address               RP                         Inc Intf(S)
-------------------------------------------------------------------------------
239.1.1.1                   (S,G)                     ip-10.10.2.1      1
   10.1.1.2                     10.20.1.4                 ip-10.10.1*
===============================================================================
A:Dut-A#

*A:Dut-C# show router 100 pim group ipv6
===============================================================================
Legend:  A = Active   S = Standby
===============================================================================
PIM Groups ipv6
===============================================================================
Group Address               Type                Spt Bit  Inc Intf       No.Oifs
   Source Address              RP                  State    Inc Intf(S)
-------------------------------------------------------------------------------
ff04:db8:224:100:0:0           (*,G)                        vprn_itf_C_11* 2
   *                            2001:db8:110:100:1*
ff04:db8:224:100:0:0           (S,G)               spt      mpls-if-74457* 3
   2001:db8:100:114:1:2           2001:db8:110:100:1*
ff04:db8:224:100:0:1           (*,G)                        vprn_itf_C_11* 2
   *                           2001:db8:110:100:1*
ff04:db8:224:100:0:1           (S,G)               spt      mpls-if-74457* 3
   2001:db8:100:114:1:2           2001:db8:110:100:1*
ff04:db8:224:100:0:2           (*,G)                        vprn_itf_C_11* 2
   *                           2001:db8:110:100:1*
ff04:db8:224:100:0:2           (S,G)               spt      mpls-if-74457* 3
   2001:db8:100:114:1:2           2001:db8:110:100:1*
ff04:db8:224:100:0:3           (*,G)                        vprn_itf_C_11* 2
   *                           2001:db8:110:100:1*
ff04:db8:224:100:0:3           (S,G)               spt      mpls-if-74457* 3
    2001:db8:100:114:1:2           2001:db8:110:100:1*
ff04:db8:224:100:0:4           (*,G)                        vprn_itf_C_11* 2
   *                           2001:db8:110:100:1*
ff04:db8:224:100:0:4           (S,G)               spt      mpls-if-74457* 3
    2001:db8:100:114:1:2           2001:db8:110:100:1*
-------------------------------------------------------------------------------
Groups : 10
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#

A:NYC>show>router>pim# group 239.255.255.250
===============================================================================
PIM Groups
===============================================================================
Group Address   Source Address  RP Address      Type     Spt Incoming      Num
                                                         Bit Intf          Oifs
-------------------------------------------------------------------------------
239.255.255.250 *               10.22.187.240   <*,G>      nyc-sjc        1
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
A:NYC>show>router>pim#

A:NYC>show>router>pim# group 239.255.255.250 detail
===============================================================================
PIM Source Group
===============================================================================
Group Address      : 239.255.255.250 Source Address     : 10.1.1.2          
RP Address         : 10.100.100.1      Type               : (S,G)             
Flags              : spt, rpt-prn-des   Keepalive Timer Exp: 0d 00:03:07       
MRIB Next Hop      : 10.1.1.2           MRIB Src Flags     : direct            
Up Time            : 0d 00:00:50        Resolved By        : rtable-u          
 
Up JP State        : Joined             Up JP Expiry       : 0d 00:00:00       
Up JP Rpt          : Pruned             Up JP Rpt Override : 0d 00:00:00       
 
Register State     : Pruned             Register Stop Exp  : 0d 00:00:47       
Reg From Anycast RP: No                                                        
 
RPF Neighbor       : 10.1.1.2                                                  
Incoming Intf      : SOURCE-3                                                  
Outgoing Intf List : To-Dut-A                                                  
 
Curr Fwding Rate   : 482.9 kbps                                                
Forwarded Packets  : 1262               Discarded Packets  : 0                 
Forwarded Octets   : 1269572            RPF Mismatches     : 0                 
Spt threshold      : 0 kbps 
===============================================================================
A:NYC>show>router>pim#

B:Dut-C# show router pim group 239.0.0.1 type sg detail 
===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address      : 239.0.0.1
Source Address     : 10.11.0.1
RP Address         : 10.20.1.3
Flags              : rpt-prn-des        Type               : (S,G)
MRIB Next Hop      : 10.11.0.1
MRIB Src Flags     : direct             Keepalive Timer    : Not Running
Up Time            : 0d 00:04:17        Resolved By        : rtable-u
 
Up JP State        : Joined             Up JP Expiry       : 0d 00:00:00
Up JP Rpt          : Pruned             Up JP Rpt Override : 0d 00:00:00
 
Register State     : No Info            
Reg From Anycast RP: No                 
 
Rpf Neighbor       : 10.11.0.1
Incoming Intf      : svc_itf
Outgoing Host List : 239.112.1.1
 
Curr Fwding Rate   : 0.0 kbps           
Forwarded Packets  : 0                  Discarded Packets  : 0
Forwarded Octets   : 0                  RPF Mismatches     : 0
Spt threshold      : 0 kbps             ECMP opt threshold : 7
Admin bandwidth    : 1 kbps             Preference         : 0

===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address      : 239.0.0.1
Source Address     : 10.11.0.2
RP Address         : 10.20.1.3
Flags              :                    Type               : (S,G)
MRIB Next Hop      : 10.11.0.2
MRIB Src Flags     : direct             Keepalive Timer    : Not Running
Up Time            : 0d 00:04:18        Resolved By        : rtable-u
 
Up JP State        : Joined             Up JP Expiry       : 0d 00:00:00
Up JP Rpt          : Not Pruned         Up JP Rpt Override : 0d 00:00:00
 
Register State     : No Info            
Reg From Anycast RP: No                 
 
Rpf Neighbor       : 10.11.0.2        
Incoming Intf      : svc_itf
Outgoing Host List : 10.112.1.1, 10.112.1.2
 
Curr Fwding Rate   : 0.0 kbps           
Forwarded Packets  : 0                  Discarded Packets  : 0
Forwarded Octets   : 0                  RPF Mismatches     : 0
Spt threshold      : 0 kbps             ECMP opt threshold : 7
Admin bandwidth    : 1 kbps             Preference         : 0
-------------------------------------------------------------------------------
Groups : 2
===============================================================================
*B:Dut-C#

A:Dut-A# show router pim group detail 
===============================================================================
PIM Source Group ipv4
===============================================================================
Group Address      : 239.1.1.1
Source Address     : 10.1.1.21
RP Address         : 10.20.1.4
Advt Router        : 10.20.1.3
Flags              :                    Type               : (S,G)
MRIB Next Hop      : 10.10.2.3
MRIB Src Flags     : remote             Standby Src Flags  : remote
keepalive Timer    : Not Running
Up Time            : 0d 00:01:22        Resolved By        : rtable-u
 
Up JP State        : Joined             Up JP Expiry       : 0d 00:00:00
Up JP Rpt          : Pruned             Up JP Rpt Override : 0d 00:00:00
Up Stdby JP State  : Joined             Up Stdby JP Expiry : 0d 00:00:12
 
Register State     : No Info            
Reg From Anycast RP: No                 
 
Rpf Neighbor       : 10.10.2.3          Stdby Rpf Neighbor : 10.10.1.2
Incoming Intf      : ip-10.10.2.1       Stdby Intf         : ip-10.10.1.1
Outgoing Host List : ix
 
Curr Fwding Rate   : 0.0 kbps           
Forwarded Packets  : 0                  Discarded Packets  : 0
Forwarded Octets   : 0                  RPF Mismatches     : 0
Spt threshold      : 0 kbps             ECMP opt threshold : 7
Admin bandwidth    : 1 kbps             
===============================================================================
PIM Source Group ipv4
Table 5. PIM Group Fields

Label

Description

Group Address

The IP multicast group address for which this entry contains information

Source Address

The source address of the multicast sender.

The value is 0 if the type is configured as starg. The address of the Rendezvous Point (RP) display when the type is configured as starRP.

RP Address

The RP address

Type

The type of entry, (*,*, rp)/(*,G) or (S,G).

Spt Bit

Specifies whether to forward on (*,*, rp)/(*,G) or on (S,G) state. It is updated when the (S,G) data comes on the RPF interface towards the source.

Incoming Intf

The interface on which the traffic comes in. It can be the RPF interface to the RP (if starg) or the source (if sg).

Num Oifs

The number of interfaces in the inherited outgoing interface list. An inherited list inherits the state from other types.

Flags

The different lists to which this interface belongs

Keepalive Timer Exp

The keepalive timer expiration which is applicable only for (S,G) entries.

The (S,G) keepalive timer is updated by data being forwarded using this (S,G) Forwarding state. It is used to keep (S,G) state alive in the absence of explicit (S,G) joins.

MRIB Next Hop

The next hop address towards the RP

MRIB Src Flags

MRIB information about the source. If the entry is of type starg or starstarrp, it will contain information about the RP for the group.

Up Time

The time since this source group entry was created.

Resolved By

The route table used for RPF check.

Up JP State

The upstream join prune state for this entry on the interface. PIM join prune messages are sent by the downstream routers towards the RPF neighbor.

Up JP Expiry

The minimum amount of time remaining before this entry will be aged out.

Up JP Rpt

The join prune Rpt state for this entry on the interface. PIM join/prune messages are sent by the downstream routers towards the RPF neighbor. (S,G, rpt) state is a result of receiving (S,G, rpt) JP message from the downstream router on the RP tree.

Up JP Rpt Override

The value used to delay triggered Join (S,G, rpt) messages to prevent implosions of triggered messages.

If this has a non-zero value, it means that the router was in 'notPruned' state and it saw a prune (S,G, rpt) message being sent to RPF (S,G, rpt). If the router sees a join (S,G, rpt) override message being sent by some other router on the LAN while the timer is still non-zero, it simply cancels the override timer. If it does not see a join (S,G, rpt) message, then on expiry of the override timer, it sends its own join (S,G, rpt) message to RPF (S,G, rpt). A similar scenario exists when RPF (S,G, rpt) changes to become equal to RPF (*,G).

Register State

The register state. The register state is kept at the source DR. When the host starts sending multicast packets and if there are no entries programmed for that group, the source DR sends a register packet to the RP (g). Register state transition happen based on the register stop timer and the response received from the RP.

Register Stop Exp

The time remaining before the register state might transition to a different state

Register from Anycast RP

The status of the register packet for that group received from one of the RP from the anycast-RP set

RPF Neighbor

The address of the RPF neighbor

Outgoing Intf List

A list of interfaces on which data is forwarded.

Curr Fwding Rate

The current forwarding rate of the multicast data for this group and source. This forwarding rate is calculated before ingress QoS policing or shaping is applied.

Forwarded Packets

The number of multicast packets that were forwarded to the interfaces in the outgoing interface list. This packet count is before ingress QoS policing or shaping is applied.

Discarded Packets

The number of multicast packets that matched this source group entry but were discarded.

For (S,G) entries, if the traffic is getting forwarded on the SPT, the packets arriving from the RPT will be discarded.

Forwarded Octets

The number of octets forwarded

RPF Mismatches

The number of multicast packets that matched this source group entry but they did not arrive on the interface.

Spt threshold

The value of the SPT threshold configured for that group. 0 kb/s means that the switch to the SP tree occurs immediately.

group

Syntax

group aa-group-id [: partition-id]

Context

[Tree] (clear>application-assurance group)

Full Context

clear application-assurance group

Description

This command clears application assurance group data.

Parameters

aa-group-id

Specifies a group of ISA MDAs.

Values

1 to 255

partition-id

Specifies a partition within a group.

Values

1 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group

Syntax

group [group-name] [detail]

Context

[Tree] (show>router>rip group)

Full Context

show router rip group

Description

This command displays RIP group information.

Parameters

group-name

Displays RIP group information for the specified group.

detail

Displays detailed RIP group information.

Platforms

All

Output

RIP Group Fields describes the standard command output fields for a RIP group.

Table 6. RIP Group Fields

Label

Description

Group

The RIP group name.

Adm

Down — The RIP group is administratively down.

Up — The RIP group is administratively up.

Opr

Down — The RIP group is operationally down.

Up — The RIP group is operationally up.

Send Mode

Bcast — Specifies that RIPv2 formatted messages are sent to the broadcast address.

Mcast — Specifies that RIPv2 formatted messages are sent to the multicast address.

None — Specifies that no RIP messages are sent (silent listener).

RIPv1 — Specifies that RIPv1 formatted messages are sent to the broadcast address.asp

Recv Mode

Both — Specifies that RIP updates in either version 1 or version 2 format will be accepted.

None — Specifies that RIP updates will not be accepted.

RIPv1 — Specifies that RIP updates in version 1 format only will be accepted.

RIPv2 — Specifies that RIP updates in version 2 format only will be accepted.

Metric In

The metric value added to routes received from a RIP neighbor.

The following output is an example of RIP group information.

Sample Standard RIP Group Output 
A:ALA-A# show router rip group
===============================================================================
RIP Groups                                                                     
===============================================================================
Group                              Adm      Opr      Send     Recv     Metric  
                                                     Mode     Mode     In      
-------------------------------------------------------------------------------
rip-group                          Up       Down     BCast    Both     1       
===============================================================================
A:ALA-A#
Sample Detailed Output 
A:ALA-A# show router rip group detail
===============================================================================
RIP groups (Detail)                                                            
===============================================================================
-------------------------------------------------------------------------------
Group "rip-group"                                                              
-------------------------------------------------------------------------------
Description    : No Description Available                                      
Admin State    : Up                     Oper State     : Down                  
Send Mode      : Broadcast              Receive Mode   : Both                  
Metric In      : 1                      Metric Out     : 1                     
Split Horizon  : Enabled                Check Zero     : Disabled              
Message Size   : 25                     Preference     : 100                   
Auth. Type     : None                   Update Timer   : 30                    
Timeout Timer  : 180                    Flush Timer    : 120                   
Export Policies:                                                               
    None                                                                       
Import Policies:                                                               
    None                                                                       
===============================================================================
A:ALA-A#

group

Syntax

group [group-name] [detail]

Context

[Tree] (show>router>ripng group)

Full Context

show router ripng group

Description

This command displays RIPng group information.

Parameters

group-name

Displays RIPng group information for the specified group.

detail

Displays detailed RIPng group information.

Platforms

All

Output

The following output is an example of RIPng group information.

Sample Output 
*A:Dut-C>config>router>if# show router ripng group "A" 
===============================================================================
RIP-NG Groups
===============================================================================
Group                              Adm      Opr      Send     Recv     Metric
                                                     Mode     Mode     In
-------------------------------------------------------------------------------
A                                  Up       Up       RipNg    RipNg    1
-------------------------------------------------------------------------------
Groups : 1
===============================================================================
*A:Dut-C>config>router>if# show router ripng group "A" detail 
===============================================================================
RIP-NG groups (Detail)
===============================================================================
-------------------------------------------------------------------------------
Group "A"
-------------------------------------------------------------------------------
Description    : No Description Available
Admin State    : Up                     Oper State     : Up
Send Mode      : RipNg                  Receive Mode   : RipNg
Metric In      : 1                      Metric Out     : 1
Split Horizon  : Enabled                Check Zero     : Disabled
Message Size   : 25                     Preference     : 100
                                        Update Timer   : 1
Timeout Timer  : 5                      Flush Timer    : 5
BFD            : Enabled                
Export Policies:                        
    directToRipng
Import Policies:                        
    None
===============================================================================

group

Syntax

group grp-ip-address [source ip-address] [interval interval] [repeat repeat] [absolute | rate]

Context

[Tree] (monitor>router>pim group)

Full Context

monitor router pim group

Description

This command monitors statistics for a PIM source group.

Parameters

grp-ip-address

Specifies the IP address of an multicast group that identifies a set of recipients that are interested in a particular data stream.

ip-address

Specifies the source IP address to use in the ping requests in dotted decimal notation.

Values

0.0.0.0 to 255.255.255.255

Default

the IP address of the egress IP interface

interval

Configures the interval for each display, in seconds.

Values

10, 20, 30, 40, 50, 60

Default

10

repeat

Configures how many times the command is repeated.

Values

1 to 999

Default

10

absolute

Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate

Displays rate-per-second for each statistic instead of the delta.

Platforms

All

group-encryption

group-encryption

Syntax

group-encryption

Context

[Tree] (show group-encryption)

Full Context

show group-encryption

Description

Commands in this context display group encryption information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group-encryption

Syntax

group-encryption

Context

[Tree] (clear group-encryption)

Full Context

clear group-encryption

Description

Commands in this context clear group encryption parameters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

group-interface

group-interface

Syntax

group-interface [fwd-service service-id] [ip-int-name] [detail] [group] [grp-address]

Context

[Tree] (show>router>igmp group-interface)

Full Context

show router igmp group-interface

Description

This command displays IGMP group-interface information.

Parameters

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

ip-int-name

Specifies an IP interface name, up to 32 characters.

detail

Displays detailed information.

group

Displays information for the group IP address.

grp-address

Displays information for the group IP address in the multicast group address format or zero.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

group-interface

Syntax

group-interface [fwd-service service-id] [ip-int-name] [detail] [group] [grp-ipv6-address]

Context

[Tree] (show>router>mld group-interface)

Full Context

show router mld group-interface

Description

This command displays MLD group-interface information.

Parameters

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

ip-int-name

IP interface name, up to 32 characters.

detail

Displays detailed information.

group

Displays information from the group IPv6 address.

grp-ipv6-address

Group IPv6 address.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

group-interface

Syntax

group-interface [fwd-service service-id] [ip-int-name]

Context

[Tree] (show>router>mld>statistics group-interface)

Full Context

show router mld statistics group-interface

Description

This command displays MLD group interface statistics information.

Parameters

service-name

Displays information associated with the specified service name.

ip-int-name

Displays information associated with the specified IP interface name.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

group-interface

Syntax

group-interface [fwd-service service-id] [ip-int-name]

Context

[Tree] (show>router>igmp>statistics group-interface)

Full Context

show router igmp statistics group-interface

Description

This command displays IGMP statistics for group interfaces.

Parameters

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: Up to 64 characters

ip-int-name

Specifies the IP interface name, up to 32 characters.

Platforms

All

groups

groups

Syntax

groups [group group-ip-address]

groups [group group-ip-address] detail

groups [group group-ip-address] summary

Context

[Tree] (show>service>active-subscribers>host-tracking groups)

Full Context

show service active-subscribers host-tracking groups

Description

This command displays active subscriber host tracking groups information.

Parameters

group-ip-address

Displays information about the group address of the active subscriber group.

Values

ipv4address: a.b.c.d

ipv6address: FFx4::/16 up to FFxE::/16

x [0..F]H

detail

Displays detailed information about the group address of the active subscriber group.

summary

Displays summarized group information for active subscribers.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

grpc

grpc

Syntax

grpc

grpc connection

grpc rpc [rpc-id]

Context

[Tree] (show>system grpc)

Full Context

show system grpc

Description

This command displays gRPC server information.

Parameters

connection

This command displays information for gRPC connections.

rpc-id

Specifies an rpc ID.

Values

0 to 4294967295

Platforms

All

Output

The following is an example of system gRPC information.

Show System gRPC Output Fields describes system gRPC output fields.

Sample Output 
A:admin@Dut-A# show system grpc
===============================================================================
gRPC Server
===============================================================================
Administrative State      : Enabled
Operational State         : Up
Supported services
-------------------------------------------------------------------------------
gNMI Version              : 0.4.0
===============================================================================


A:admin@Dut-A# show system grpc connection
===============================================================================
gRPC Server connections
===============================================================================
Address                   : 192.99.5.0
Port                      : 49648
Establishment Time        : 2018/02/20 09:51:48
Active RPC Count          : 0
Total RPC Count           : 1
Rx Bytes                  : 2954
Tx Bytes                  : 3908
-------------------------------------------------------------------------------
No. of connections        : 1
===============================================================================

A:node-6>show>system# grpc rpc
===============================================================================
gRPC Server RPCs
===============================================================================
No. of RPCs               : 0
===============================================================================
Table 7. Show System gRPC Output Fields

Label

Description

gRPC Server

Specifies the gRPC server name.

Administrative State

Specifies the administrative state (Enabled, Disabled).

Operational State

Specifies the operational state (Up, Down).

Supported services

Specifies the supported services.

gNMI Version

Specifies the gNMI version.

Address

Specifies the IP address.

Port

Specifies the port number.

Establishment Time

Specifies the establishment time.

Active RPC Count

Specifies the active RPC count.

Total RPC Count

Specifies the total RPC count.

Rx Bytes

Specifies the number of received bytes.

Tx Bytes

Specifies the number of transmitted bytes.

No. of connections

Specifies the number of gRPC connections.

No. of RPCs

Specifies the number of RPCs.

grpc

Syntax

grpc

Context

[Tree] (show>system>telemetry grpc)

Full Context

show system telemetry grpc

Description

This command displays the gRPC server status.

Platforms

All

Output

The following is an example of gRPC server information.

Show System gRPC Output Fields describes gRPC fields.

Sample Output 
===============================================================================
gRPC Server
===============================================================================
Administrative State      : Disabled
Operational State         : Down
===============================================================================
Table 8. Show System gRPC Output Fields

Labels

Description

gRPC Server

Administrative State

Enabled — Displays that gRPC is enabled.

Disabled — Displays that gRPC is disabled.

Operational State

Up — Displays that gRPC is operational.

Down — Displays that gRPC is not operational.

grt-lookup

grt-lookup

Syntax

grt-lookup

Context

[Tree] (clear>router grt-lookup)

Full Context

clear router grt-lookup

Description

This command re-evaluates route policies for GRT.

Platforms

All

gsmp

gsmp

Syntax

gsmp

Context

[Tree] (show>service>id gsmp)

Full Context

show service id gsmp

Description

Commands in this context display GSMP information.

Platforms

All

gsmp

Syntax

gsmp

Context

[Tree] (clear>service>id gsmp)

Full Context

clear service id gsmp

Description

Commands in this context clear GSMP statistics.

Platforms

All

gtm

gtm

Syntax

gtm

Context

[Tree] (show>router gtm)

Full Context

show router gtm

Description

This command multicast GTM related information.

Platforms

All

Output

The following is an example of router GTM information.

Sample Output 
*A:Dut-A# show router gtm 
===============================================================================
GTM (MVPN Base) configuration data
===============================================================================
signaling          : Bgp                  auto-discovery     : Default
UMH Selection      : Highest-Ip           SA withdrawn       : Disabled
intersite-shared   : Enabled              Persist SA         : Disabled
vrf-import         : N/A
vrf-export         : N/A
vrf-target         : unicast
C-Mcast Import RT  : target:10.20.1.2:0
           
ipmsi              : rsvp IpmsiTmpl
i-pmsi P2MP AdmSt  : Up
i-pmsi Tunnel Name : IpmsiTmpl-gtm-73780
enable-bfd-root    : false                enable-bfd-leaf    : false
Mdt-type           : sender-receiver
           
BSR signalling     : none
Wildcard s-pmsi    : Disabled
Multistream-SPMSI  : Disabled
s-pmsi             : none
data-delay-interval: 3 seconds
enable-asm-mdt     : N/A
===============================================================================

gtp

gtp

Syntax

gtp

Context

[Tree] (show>router gtp)

Full Context

show router gtp

Description

This command displays operational information related to GTP usage in the specified routing context.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

gtp

Syntax

gtp

Context

[Tree] (show>subscr-mgmt gtp)

Full Context

show subscriber-mgmt gtp

Description

This command displays router operational GTP information.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

gtp

Syntax

gtp

Context

[Tree] (clear>router gtp)

Full Context

clear router gtp

Description

Commands in this context clear GTP information in this routing context.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

gtp

Syntax

gtp session all

gtp session apn apn

gtp session apn apn imsi imsi

gtp session imsi imsi

gtp statistics

Context

[Tree] (clear>subscr-mgmt gtp)

Full Context

clear subscriber-mgmt gtp

Description

This command clears all GTP sessions matching the specified criteria. Associated objects, such as the ESM subscriber in a GTP uplink scenario are also removed.

Parameters

session

Specifies to remove GTP sessions.

all

Specifies to remove all GTP sessions in the system.

statistics

Specifies to clear GTP statistics.

apn

Specifies the APN identifying the session, up to 100 characters.

imsi

Specifies the IMSI identifying the session, in the format of a string of digits between 9 and 15.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

gtp

Syntax

gtp

gtp gtp-filter gtp-filter-name

Context

[Tree] (show>app-assure>group gtp)

Full Context

show application-assurance group gtp

Description

This command displays GTP (General packet radio service (GPRS) Tunneling Protocol) information.

Parameters

gtp-filter-name

Specifies a GTP filter name, up to 32 characters. When a filter is specified, all traffic is examined as described in the tmnxBsxGtpFltrTable.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an example output for the gtp gtp-filter command.

Sample Output 
show application-assurance group 1:0 gtp gtp-filter "bob"
===============================================================================
Application Assurance Group 1:0 GTP Filter "bob"
===============================================================================
Description                 : (Not Specified)
Maximum payload length      : (Not Specified)
Default action              : permit
Default gtp v2 action       : deny
Default imsi-apn action     : deny
GTP in GTP action           : deny
Validate GTP tunnels        : enabled
Validate sequence number    : enabled
Validate source IP address  : enabled
Configured messages         : 2
Configured gtp v2 messages  : 3
Configured imsi apn filters : 3
 
Packets arrived             : 1070
Packets denied
  Payload length            : 0
  Message type              : 0
  GTP-v2 Message type       : 100
  Mandatory header          : 0       
  Extension header          : 0
  Information element       : 0
  Invalid TEID              : 25
  IMSI-APN                  : 200
  Invalid Sequence Number   : 300
  Invalid Source IP add*    : 120
  Missing Mandatory IEs     : 0
  GTP in GTP                : 325
  No tunnel resource        : 0
  Tunnel endpoint limit     : 0
Packets permitted           : 0
===============================================================================

gtp

Syntax

gtp

Context

[Tree] (clear>app-assure>group gtp)

Full Context

clear application-assurance group gtp

Description

This command clears the application-assurance GTP.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

gtp-statistics

gtp-statistics

Syntax

gtp-statistics

Context

[Tree] (show>subscr-mgmt>wlan-gw gtp-statistics)

Full Context

show subscriber-mgmt wlan-gw gtp-statistics

Description

This command displays GTP statistics.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an example of WLAN-GW GTP statistics.

Sample Output 
*A:Dut-C# show subscriber-mgmt wlan-gw gtp-statistics
===============================================================================
GTP statistics
===============================================================================
tx echo requests                                        : 33
tx echo responses                                       : 0
tx errors                                               : 0
rx echo requests                                        : 0
rx echo responses                                       : 33
rx errors                                               : 0
rx version not supported                                : 0
rx zero TEID responses                                  : 0
path faults                                             : 0
path restarts                                           : 0
tx invalid msgs                                         : 0
tx create PDP context requests                          : 4
tx create PDP context responses                         : 0
tx delete PDP context requests                          : 0
tx delete PDP context responses                         : 0
tx create session requests                              : 0
tx create session responses                             : 0
tx delete session requests                              : 0
tx delete session responses                             : 0
tx delete bearer requests                               : 0
tx delete bearer responses                              : 0
tx create bearer responses                              : 0
tx update bearer responses                              : 0
tx modify bearer requests                               : 0
tx modify bearer responses                              : 0
tx error indication count                               : 0
rx invalid msgs                                         : 0
rx create PDP context requests                          : 0
rx create PDP context responses                         : 4
rx delete PDP context requests                          : 0
rx delete PDP context responses                         : 0
rx create session requests                              : 0
rx create session responses                             : 0
rx delete session requests                              : 0
rx delete session responses                             : 0
rx delete bearer requests                               : 0
rx delete bearer responses                              : 0
rx create bearer requests                               : 0
rx update bearer requests                               : 0
rx modify bearer requests                               : 0
rx modify bearer responses                              : 0
rx error indication count                               : 0
rx invalid pkt length                                   : 0
rx unknown pkts                                         : 0
rx missing IE pkts                                      : 0
rx bad IP header pkts                                   : 0
rx bad UDP header pkts                                  : 0
rx discarded pkts                                       : 0
rx in-session discarded pkts                            : 0
rx pkts                                                 : 37
tx discarded pkts                                       : 0
tx pkts                                                 : 37
===============================================================================
*A:Dut-C#