perform commands
- force a LAG subgroup to become active
- set an IS-IS overload condition
- terminate a Python script
perform
— filter
— ip-filter reference
— entry reference
— activate-primary-action
— ipv6-filter reference
— entry reference
— activate-primary-action
— mac-filter reference
— entry reference
— activate-primary-action
— redirect-policy reference
— activate-best-dest
— lag
— clear-force
— lag
— [lag-name] reference
— sub-group number
— multi-chassis
— all
— peer
— [ip-address] reference
— force-active
— lag
— [lag-name] reference
— sub-group number
— multi-chassis
— all
— peer
— [ip-address] reference
— force-standby
— lag
— [lag-name] reference
— sub-group number
— multi-chassis
— all
— peer
— [ip-address] reference
— load-balance
— class number
— [lag-name] reference
— python
— python-policy
— cache
— policy
— hex-key string
— [name] reference
— set-lifetime number
— string-key string
— python-script
— protect
— hmac-sha256-key string
— input-file string
— output-file string
— reload
— script
— [name] reference
— router string
— isis reference
— ldp-sync-exit
— overload
— max-metric boolean
— [seconds] number
— run-manual-spf
— system
— script-control
— script-policy
— stop
— all
— owner reference
— policy-name reference
— security
— secure-boot
— show
— uefi-variables
— card reference
perform command descriptions
perform
filter
ip-filter [filter-name] reference
[filter-name] reference
entry [entry-id] reference
[entry-id] reference
activate-primary-action
Synopsis | Switch from the secondary to the primary action | |
Context | perform filter ip-filter reference entry reference activate-primary-action | |
Tree | activate-primary-action | |
Description | This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires. | |
Introduced | 23.7.R1 | |
Platforms | All |
ipv6-filter [filter-name] reference
Synopsis | Enter the ipv6-filter list instance | |
Context | perform filter ipv6-filter reference | |
Tree | ipv6-filter | |
Introduced | 23.7.R1 | |
Platforms | All |
[filter-name] reference
Synopsis | Name to associate with the IPv6 filter | |
Context | perform filter ipv6-filter reference | |
Tree | ipv6-filter | |
Reference | state filter ipv6-filter string | |
Notes | This element is part of a list key. | |
Introduced | 23.7.R1 | |
Platforms | All |
entry [entry-id] reference
Synopsis | Enter the entry list instance | |
Context | perform filter ipv6-filter reference entry reference | |
Tree | entry | |
Introduced | 23.7.R1 | |
Platforms | All |
[entry-id] reference
Synopsis | ID for the IPv6 filter entry | |
Context | perform filter ipv6-filter reference entry reference | |
Tree | entry | |
Reference | state filter ipv6-filter string entry number | |
Notes | This element is part of a list key. | |
Introduced | 23.7.R1 | |
Platforms | All |
activate-primary-action
Synopsis | Switch from the secondary to the primary action | |
Context | perform filter ipv6-filter reference entry reference activate-primary-action | |
Tree | activate-primary-action | |
Description | This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires. | |
Introduced | 23.7.R1 | |
Platforms | All |
mac-filter [filter-name] reference
Synopsis | Enter the mac-filter list instance | |
Context | perform filter mac-filter reference | |
Tree | mac-filter | |
Introduced | 23.7.R1 | |
Platforms | All |
[filter-name] reference
Synopsis | Name to associate with the MAC filter | |
Context | perform filter mac-filter reference | |
Tree | mac-filter | |
Reference | state filter mac-filter string | |
Notes | This element is part of a list key. | |
Introduced | 23.7.R1 | |
Platforms | All |
entry [entry-id] reference
Synopsis | Enter the entry list instance | |
Context | perform filter mac-filter reference entry reference | |
Tree | entry | |
Introduced | 23.7.R1 | |
Platforms | All |
[entry-id] reference
Synopsis | ID for the MAC filter entry | |
Context | perform filter mac-filter reference entry reference | |
Tree | entry | |
Reference | state filter mac-filter string entry number | |
Notes | This element is part of a list key. | |
Introduced | 23.7.R1 | |
Platforms | All |
activate-primary-action
Synopsis | Switch from the secondary to the primary action | |
Context | perform filter mac-filter reference entry reference activate-primary-action | |
Tree | activate-primary-action | |
Description | This command activates the primary action for the specified filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action is activated unless the primary target is down. If the configure filter redirect sticky-dest command is configured, the timer expires. | |
Introduced | 23.7.R1 | |
Platforms | All |
redirect-policy [redirect-policy-name] reference
Synopsis | Enter the redirect-policy list instance | |
Context | perform filter redirect-policy reference | |
Tree | redirect-policy | |
Introduced | 23.7.R1 | |
Platforms | All |
[redirect-policy-name] reference
Synopsis | Name of the redirect policy | |
Context | perform filter redirect-policy reference | |
Tree | redirect-policy | |
Reference | state filter redirect-policy string | |
Notes | This element is part of a list key. | |
Introduced | 23.7.R1 | |
Platforms | All |
activate-best-dest
Synopsis | Activate the current best destination | |
Context | perform filter redirect-policy reference activate-best-dest | |
Tree | activate-best-dest | |
Description | This command forces a PBR switch to the best destination selected by the redirect policy when that destination is not currently active as result of sticky destination functionality being enabled for the specified redirect policy. If the configure filter redirect sticky-dest command is configured, the timer expires. | |
Introduced | 23.7.R1 | |
Platforms | All |
lag
clear-force
Synopsis | Perform LAG clear-force operation | |
Context | perform lag clear-force | |
Tree | clear-force | |
Introduced | 23.7.R1 | |
Platforms | All |
lag
Synopsis | Perform LAG operation on the specified LAG | |
Context | perform lag clear-force lag | |
Tree | lag | |
Introduced | 23.7.R1 | |
Platforms | All |
[lag-name] reference
Synopsis | LAG name | |
Context | perform lag clear-force lag [lag-name] reference | |
Tree | [lag-name] | |
Reference | state lag string | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
sub-group number
multi-chassis
Synopsis | Enter the multi-chassis context | |
Context | perform lag clear-force multi-chassis | |
Tree | multi-chassis | |
Introduced | 23.7.R1 | |
Platforms | All |
all
Synopsis | Perform LAG operation on all multi-chassis LAGs | |
Context | perform lag clear-force multi-chassis all | |
Tree | all | |
Introduced | 23.7.R1 | |
Platforms | All |
peer
Synopsis | Perform LAG operation on the MC peer | |
Context | perform lag clear-force multi-chassis peer | |
Tree | peer | |
Introduced | 23.7.R1 | |
Platforms | All |
[ip-address] reference
Synopsis | Peer IP address | |
Context | perform lag clear-force multi-chassis peer [ip-address] reference | |
Tree | [ip-address] | |
Reference | state redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
force-active
Synopsis | Perform LAG force-active operation | |
Context | perform lag force-active | |
Tree | force-active | |
Introduced | 23.7.R1 | |
Platforms | All |
lag
Synopsis | Perform LAG operation on the specified LAG | |
Context | perform lag force-active lag | |
Tree | lag | |
Introduced | 23.7.R1 | |
Platforms | All |
[lag-name] reference
Synopsis | LAG name | |
Context | perform lag force-active lag [lag-name] reference | |
Tree | [lag-name] | |
Reference | state lag string | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
sub-group number
multi-chassis
Synopsis | Enter the multi-chassis context | |
Context | perform lag force-active multi-chassis | |
Tree | multi-chassis | |
Introduced | 23.7.R1 | |
Platforms | All |
all
Synopsis | Perform LAG operation on all multi-chassis LAGs | |
Context | perform lag force-active multi-chassis all | |
Tree | all | |
Introduced | 23.7.R1 | |
Platforms | All |
peer
Synopsis | Perform LAG operation on the MC peer | |
Context | perform lag force-active multi-chassis peer | |
Tree | peer | |
Introduced | 23.7.R1 | |
Platforms | All |
[ip-address] reference
Synopsis | Peer IP address | |
Context | perform lag force-active multi-chassis peer [ip-address] reference | |
Tree | [ip-address] | |
Reference | state redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
force-standby
Synopsis | Perform LAG force-standby operation | |
Context | perform lag force-standby | |
Tree | force-standby | |
Introduced | 23.7.R1 | |
Platforms | All |
lag
Synopsis | Perform LAG operation on the specified LAG | |
Context | perform lag force-standby lag | |
Tree | lag | |
Introduced | 23.7.R1 | |
Platforms | All |
[lag-name] reference
Synopsis | LAG name | |
Context | perform lag force-standby lag [lag-name] reference | |
Tree | [lag-name] | |
Reference | state lag string | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
sub-group number
multi-chassis
Synopsis | Enter the multi-chassis context | |
Context | perform lag force-standby multi-chassis | |
Tree | multi-chassis | |
Introduced | 23.7.R1 | |
Platforms | All |
all
Synopsis | Perform LAG operation on all multi-chassis LAGs | |
Context | perform lag force-standby multi-chassis all | |
Tree | all | |
Introduced | 23.7.R1 | |
Platforms | All |
peer
Synopsis | Perform LAG operation on the MC peer | |
Context | perform lag force-standby multi-chassis peer | |
Tree | peer | |
Introduced | 23.7.R1 | |
Platforms | All |
[ip-address] reference
Synopsis | Peer IP address | |
Context | perform lag force-standby multi-chassis peer [ip-address] reference | |
Tree | [ip-address] | |
Reference | state redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
load-balance
Synopsis | Perform LAG load-balance operation | |
Context | perform lag load-balance | |
Tree | load-balance | |
Introduced | 23.7.R1 | |
Platforms | All |
class number
Synopsis | Class used for load balancing | |
Context | perform lag load-balance class number | |
Tree | class | |
Range | 1 to 3 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
All |
[lag-name] reference
Synopsis | LAG name | |
Context | perform lag load-balance [lag-name] reference | |
Tree | [lag-name] | |
Reference | state lag string | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | All |
python
python-policy
Synopsis | Enter the python-policy context | |
Context | perform python python-policy | |
Tree | python-policy | |
Introduced | 23.10.R1 | |
Platforms | All |
cache
Synopsis | Enter the cache context | |
Context | perform python python-policy cache | |
Tree | cache | |
Description | Commands in this context operate on python cache entries. | |
Introduced | 23.10.R1 | |
Platforms | All |
policy
hex-key string
[name] reference
set-lifetime number
Synopsis | Lifetime to set for a Python cache entry | |
Context | perform python python-policy cache policy set-lifetime number | |
Tree | set-lifetime | |
Range | 1 to 604800 | |
Units | seconds | |
Notes |
This element is mandatory. | |
Introduced | 23.10.R1 | |
Platforms |
All |
string-key string
Synopsis | Policy key in ASCII format | |
Context | perform python python-policy cache policy string-key string | |
Tree | string-key | |
String Length | 1 to 512 | |
Notes | The following elements are part of a mandatory choice: hex-key or string-key. | |
Introduced | 23.10.R1 | |
Platforms | All |
python-script
Synopsis | Enter the python-script context | |
Context | perform python python-script | |
Tree | python-script | |
Introduced | 23.10.R1 | |
Platforms | All |
protect
Synopsis | Convert a Python file into a protected SRPY format | |
Context | perform python python-script protect | |
Tree | protect | |
Description | When invoked, the system converts a normal (unprotected) Python script file into a protected SRPY format using a specified key. For more information about the SRPY format and protected scripts, see "Python script protection" in the 7450 ESS, 7750 SR, and VSR Triple Play Service Delivery Architecture Guide. | |
Introduced | 23.10.R1 | |
Platforms | All |
hmac-sha256-key string
Synopsis | Key used to compute the hash | |
Context | perform python python-script protect hmac-sha256-key string | |
Tree | hmac-sha256-key | |
String Length | 1 to 128 | |
Notes | This element is mandatory. | |
Introduced | 23.10.R1 | |
Platforms | All |
input-file string
Synopsis | URL of the input unprotected script file | |
Context | perform python python-script protect input-file string | |
Tree | input-file | |
String Length | 1 to 180 | |
Notes | This element is mandatory. | |
Introduced | 23.10.R1 | |
Platforms | All |
output-file string
Synopsis | URL of the output protected script file | |
Context | perform python python-script protect output-file string | |
Tree | output-file | |
String Length | 1 to 180 | |
Notes | This element is mandatory. | |
Introduced | 23.10.R1 | |
Platforms | All |
reload
Synopsis | Enter the reload context | |
Context | perform python python-script reload | |
Tree | reload | |
Description | Commands in this context reload and recompile the primary, secondary, and tertiary scripts in the specified Python scripts, in that order. The system uses the first script that comes up. Executing these commands may update the last modified time for the system configuration. | |
Introduced | 23.10.R1 | |
Platforms | All |
script
[name] reference
router [router-instance] string
[router-instance] string
isis [isis-instance] reference
[isis-instance] reference
ldp-sync-exit
Synopsis | Terminate LDP synchronization and restore actual cost | |
Context | perform router string isis reference ldp-sync-exit | |
Tree | ldp-sync-exit | |
Introduced | 23.10.R1 | |
Platforms | All |
overload
max-metric boolean
Synopsis | Enable advertising max-metric values | |
Context | perform router string isis reference overload max-metric boolean | |
Tree | max-metric | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | All |
[seconds] number
run-manual-spf
Synopsis | Run SPF algorithm | |
Context | perform router string isis reference run-manual-spf | |
Tree | run-manual-spf | |
Introduced | 23.10.R1 | |
Platforms | All |
system
script-control
Synopsis | Enter the script-control context | |
Context | perform system script-control | |
Tree | script-control | |
Introduced | 23.10.R1 | |
Platforms | All |
script-policy
Synopsis | Enter the script-policy context | |
Context | perform system script-control script-policy | |
Tree | script-policy | |
Introduced | 23.10.R1 | |
Platforms | All |
stop
Synopsis | Stop the execution of scripts | |
Context | perform system script-control script-policy stop | |
Tree | stop | |
Introduced | 23.10.R1 | |
Platforms | All |
all
Synopsis | Stop script execution for all script policies | |
Context | perform system script-control script-policy stop all | |
Tree | all | |
Notes | The following elements are part of a mandatory choice: all or (owner and policy-name). | |
Introduced | 23.10.R1 | |
Platforms | All |
owner reference
Synopsis | Stop script execution for a specific owner | |
Context | perform system script-control script-policy stop owner reference | |
Tree | owner | |
Default | TiMOS CLI | |
Reference | state system script-control script-policy string owner string | |
Notes | The following elements are part of a mandatory choice: all or (owner and policy-name). | |
Introduced | 23.10.R1 | |
Platforms | All |
policy-name reference
Synopsis | Stop script execution for a specific policy | |
Context | perform system script-control script-policy stop policy-name reference | |
Tree | policy-name | |
Reference | state system script-control script-policy string owner string | |
Notes | The following elements are part of a mandatory choice: all or (owner and policy-name). | |
Introduced | 23.10.R1 | |
Platforms | All |
security
secure-boot
Synopsis | Enter the secure-boot context | |
Context | perform system security secure-boot | |
Tree | secure-boot | |
Introduced | 23.7.R1 | |
Platforms | 7750 SR-1-24D, 7750 SR-1-46S, 7750 SR-1-48D, 7750 SR-1-92S, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-s, 7950 XRS-20e |
show
uefi-variables
Synopsis | Display secure-boot UEFI variables | |
Context | perform system security secure-boot show uefi-variables | |
Tree | uefi-variables | |
Introduced | 23.7.R1 | |
Platforms | 7750 SR-1-24D, 7750 SR-1-46S, 7750 SR-1-48D, 7750 SR-1-92S, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-s, 7950 XRS-20e |
card reference
Synopsis | CPM slot where UEFI variables are returned | |
Context | perform system security secure-boot show uefi-variables card reference | |
Tree | card | |
Reference | state cpm string | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | 7750 SR-1-24D, 7750 SR-1-46S, 7750 SR-1-48D, 7750 SR-1-92S, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-s, 7950 XRS-20e |