File management
The file system
The SR OS file system is used to store files used and generated by the system, for example, image files, configuration files, logging files and accounting files.
The file commands allow you to copy, create, move, and delete files and directories, navigate to a different directory, display file or directory contents and the image version.
Although some of the storage devices on routers are not actually compact flash devices (for example, cf1: on the 7950 XRS is an internal SSD), all storage devices are referred to as compact flash.
Storage devices
In the 7750 SR and 7450 ESS, each control processor can have up to three storage devices numbered one through three. In the 7950 XRS, each CCM has an SSD and up to two compact flash devices. The names for these devices are:
cf1:
cf2:
cf3:
The above device names are relative device names as they refer to the devices local to the control processor with the current console session. The colon (‟:”) at the end of the name indicates it is a device.
The three compact flash devices on the 7450 ESS and 7750 SR OS are removable and have an administrative state.
The cf2: and cf3: compact flash devices on the 7950 XRS routers are removable and have an administrative state. cf1: is an internal SSD.
Devices vary by platform as compact flash, SD card, USB, or embedded SSD.
To prevent corrupting open files in the file system, only remove a compact flash that is administratively shutdown. SR OS gracefully closes any open files on the device, so it can be safely removed.
URLs
The arguments for the SR OS file commands are modeled after standard universal resource locater (URL). A URL refers to a file (a file-url) or a directory (a directory-url).
SR OS supports operations on both the local file system and on remote files. For the purposes of categorizing the applicability of commands to local and remote file operations, URLs are divided into five types of URLs: local, ftp, tftp, http, https, and scp. The syntax for each of the URL types are listed in URL types and syntax .
| URL type | Syntax | Notes |
|---|---|---|
|
local-url |
[cflash-id:\]path |
cflash-id is the compact flash device name. Values: cf1:, cf2:, cf3: |
|
ftp-url |
ftp://[username[:password]@]host/path |
An absolute FTP path from the root of the remote file system. username is the FTP username password is the FTP user password host is the FTP server path is the path to the directory or file |
|
ftp://[username[:password]@]host/./path |
A relative FTP path from the user’s home directory. Note the period and slash (‟./”) in this syntax compared to the absolute path. |
|
|
tftp-url |
tftp://host[/path]/filename |
TFTP is only supported for operations on a file-url. |
|
http-url |
http://[username[:password]@]host[:port]/path |
host is the HTTP server port defaults to 80 |
|
https-url |
https://[username[:password]@]host[:port]/path |
host is the HTTPS server port defaults to 443 |
|
scp-url |
scp://username @host:path |
username is the SSH username host is the SSH server path is the path to the directory or file |
If the host portion of a URL is an IPv6 address, enclose the URL in quotes and the address in square brackets, as shown in the following examples.
- "ftp://username:password@[2001:db8:3333:4444:5555:6666:7777:8888]/testfile.txt"
- "scp://username@[2001:db8:3333:4444:5555:6666:7777:8888]/testfile.txt"
The system accepts forward slash (/) or backslash (\) characters to delimit directory and/or filenames in URLs. Similarly, the SR OS SCP client application can use either slash or backslash characters, but not all SCP clients treat backslash characters as equivalent to slash characters. In particular, UNIX systems often interprets the backslash character as an escape character. This can cause problems when using an external SCP client application to send files to the SCP server. If the external system treats the backslash like an escape character, the backslash delimiter gets stripped by the parser and is not transmitted to the SCP server.
For example, a destination directory specified as ‟cf1:\dir1\file1” is transmitted to the SCP server as ‟cf1:dir1file1” where the backslash escape characters are stripped by the SCP client system before transmission. On systems where the client treats the backslash like an escape character, a double backslash (\\) or the forward slash (/) can typically be used to properly delimit directories and the filename.
When a special character is used in a password, it can cause issues when that password is encoded as part of a URL. To prevent this issue, percent encoding can be used. Percent encoding is a mechanism to encode 8-bit characters that have specific meaning in the context of URLs. The encoding consists of substitution of a percent character (%) followed by the hexadecimal representation of the ASCII value of the replaced character.
Some file manipulation commands such as copying, removing, or moving files, may request access to an HTTP or HTTPS server. If an HTTP or HTTPS server redirects the system to a different URL (from an "HTTP 301" error or similar response), the system prompts the user "y/n" to either repeat the operation with the new URL or terminate it. These file commands can be configured to force the HTTP redirects without prompting or they can be configured to refuse HTTP redirects. If a file command is redirected more than eight times, or if it queries an HTTPS URL and gets redirected to an HTTP URL, the command automatically terminates as a security measure.
- MD-CLI
copy source-url destination-url direct-http - classic
CLI
copy source-url dest-url no-redirect
- MD-CLI
copy source-url destination-url force - classic
CLI
copy source-url dest-url force
When connecting to an HTTPS server, the system verifies the server's TLS certificate. For the certificate to pass verification, the system must have a CA profile already configured for the server's Certificate Authority (CA), which specifies up-to-date certificate and CRL files. HTTPS file commands do not use the Online Certificate Status Protocol (OCSP). If the certificate was issued by an intermediate CA, the system must have a CA profile for every CA tracing back to the root CA. If the server's certificate fails verification for any reason, the file command terminates. See the 7450 ESS, 7750 SR, and VSR Multiservice Integrated Service Adapter and Extended Services Appliance Guide for more information about CA profiles.
configure system security pki ca-profileAn HTTPS file command may also include a client-tls-profile configuration parameter, referring to a client TLS profile that provides the cipher list, client certificate, and trust anchor the system uses when communicating with the HTTPS server. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide for more information about client TLS profiles.
A file command that connects to an HTTP or HTTPS server outside the local network may need to use an HTTP proxy. The user may specify a proxy server (which must be an HTTP URL).
HTTP digest authentication
- MD5
- SHA-256
- SHA-512/256
Wildcards and special characters
SR OS supports the standard wildcard characters. The asterisk (*) can represent zero or more characters in a string of characters. The question mark (?) represents any one character and must be enclosed in quotation marks (" ").
MD-CLI
[/file "cf3:\"]
A:admin@node-2# copy bof.* testdir
11 file(s) copied.
[/file "cf3:\"]
A:admin@node-2#
classic CLI
A:node-2>file cf3:\ # copy bof.* testdir
Copying file cf3:\bof.cfg-1 ... OK
Copying file cf3:\bof.cfg-2 ... OK
Copying file cf3:\bof.cfg-3 ... OK
Copying file cf3:\bof.cfg-4 ... OK
Copying file cf3:\bof.cfg-5 ... OK
Copying file cf3:\bof.cfg-6 ... OK
Copying file cf3:\bof.cfg-7 ... OK
Copying file cf3:\bof.cfg-8 ... OK
Copying file cf3:\bof.cfg-9 ... OK
Copying file cf3:\bof.cfg.1 ... OK
Copying file cf3:\bof.cfg ... OK
11 file(s) copied.
A:node-2>file cf3:\ #
Text editor
The text editor allows the user to edit an ASCII text file. When the user modifies the configuration using a configuration mode, the system validates whether the user is allowed to perform configuration changes. When the text editor is used to edit a configuration file, these validation checks do not occur. For this reason, administrator privileges are required to access the text editor, and the user profile must be modified to allow this access.
Access permission for the directory where the file resides must be granted before a user can open, read, or write a file. If the user does not have permission to access the directory, the operation is denied.
Summary of text editor commands
The text editor operates in the following modes:
-
command mode
In this mode, every character entered is a command that causes an action to be taken on the text file. For example, the character “O” typed in command mode causes the text editor to enter insert mode.
-
insert mode
In this mode, every character typed is added to the text in the file. Pressing Esc turns off insert mode.
Using text editor commands
Use the commands described in the tables in this section to do the following:
- start and end text editor sessions
- move within a file
- enter new text
- modify, move, and delete existing text
- read from and write to other files
The following table describes the commands to cut, paste, and delete text.
| Text editor command | Description |
|---|---|
| " | Specify a buffer to be used with any of the commands using buffers. Follow the quotation mark (") character with a letter or a number that corresponds to a buffer. |
| d | Delete text. The “dd” command deletes the current line. A count specifies the number of lines to delete. Deleted text is placed in the buffer specified with the " command. If no buffer is specified, the general buffer is used. |
| D | Delete to the end of the line from the current cursor position. |
| p | Paste the specified buffer after the current cursor position or line. If no buffer is specified using the " command, the general buffer is used. |
| P | Paste the specified buffer before the current cursor position or line. If no buffer is specified using the " command, the general buffer is used. |
| x | Delete the character under the cursor. A count specifies the number of characters to delete. The characters after the cursor are deleted. |
| X | Delete the character before the cursor. |
| y | Yank text and place the result into a buffer. The “yy” command yanks the current line. Entering a number yanks the specified number of lines. The buffer can be specified with the " command. If no buffer is specified, the general buffer is used. |
| Y | Yank the current line into the specified buffer. If no buffer is specified, the general buffer is used. |
The following table describes the commands to insert new text.
| Text editor command | Description |
|---|---|
| A | Append text at the end of the current line. |
| I | Insert text from the beginning of a line. |
| O | Enter insert mode in a new line above the current cursor position. |
| a | Enter insert mode and append text after the current cursor position. A preceding count inserts all the text that was inserted the specified number of times. |
| i | Enter insert mode and insert typed text before the current cursor position. A preceding count inserts all the text that was inserted the specified number of times. |
| o | Enter insert mode in a new line below the current cursor position. |
The following table describes the commands used to move the cursor within the file.
| Text editor command | Description |
|---|---|
| ^B | Scroll backward one page. A count scrolls that many pages. |
| ^D | Scroll forward half a window. A count scrolls that many lines. |
| ^F | Scroll forward one page. A count scrolls that many pages. |
| ^H | Move the cursor one space to the left. A count moves that many spaces. |
| ^J | Move the cursor down one line in the same column. A count moves that many lines down. |
| ^M | Move to the first character on the next line. |
| ^N | Move the cursor down one line in the same column. A count moves that many lines down. |
| ^P | Move the cursor up one line in the same column. A count moves that many lines up. |
| ^U | Scroll backward half a window. A count scrolls that many lines. |
| $ | Move the cursor to the end of the current line. A count moves to the end of the following lines. |
| % | Move the cursor to the matching parenthesis or brace. |
| ^ | Move the cursor to the first non-whitespace character. |
| ( | Move the cursor to the beginning of a sentence. |
| ) | Move the cursor to the beginning of the next sentence. |
| { | Move the cursor to the preceding paragraph. |
| } | Move the cursor to the next paragraph. |
| | | Move the cursor to the column specified by the count. |
| + | Move the cursor to the first non-whitespace character in the next line. |
| - | Move the cursor to the first non-whitespace character in the previous line. |
| _ | Move the cursor to the first non-whitespace character in the current line. |
| 0 | Move the cursor to the first column of the current line. |
| B | Move the cursor back one word, skipping over punctuation. |
| E | Move the cursor forward to the end of a word, skipping over punctuation. |
| G | Go to the line number specified as the count. If no count is specified, go to the end of the file. |
| H | Move the cursor to the first non-whitespace character at the top of the screen. |
| L | Move the cursor to the first non-whitespace character at the bottom of the screen. |
| M | Move the cursor to the first non-whitespace character in the middle of the screen. |
| W | Move forward to the beginning of a word, skipping over punctuation. |
| b | Move the cursor back one word. If the cursor is in the middle of a word, move the cursor to the first character of that word. |
| e | Move the cursor forward one word. If the cursor is in the middle of a word, move the cursor to the last character of that word. |
| h | Move the cursor one character position to the left. |
| j | Move the cursor down one line. |
| k | Move the cursor up one line. |
| l | Move the cursor one character position to the right. |
| w | Move the cursor forward one word. If the cursor is in the middle of a word, move the cursor to the first character of the next word. |
The following table describes the commands to move the cursor around the screen.
| Text editor command | Description |
|---|---|
| ^E | Scroll forward one line. A count scrolls that many lines. |
| ^Y | Scroll backward one line. A count scrolls that many lines. |
| z |
Redraw the screen with the following options:
If you specify a count before the z command, it changes the current line to the line specified. For example, 16z. puts line 16 on the center of the screen. |
The following table describes the commands to replace text.
| Text editor command | Description |
|---|---|
| C | Change to the end of the line from the current cursor position. |
| R | Replace characters on the screen with a set of characters entered, ending with Esc. |
| S | Change an entire line. |
| c | The cc command changes the current line. A count changes that many lines. |
| r | Replace one character under the cursor. Specify a count to replace a number of characters. |
| s | Substitute one character under the cursor, and enter insert mode. Specify a count to substitute a number of characters. A dollar sign ($) is placed at the last character to be substituted. |
The following table describes the commands to search for text or characters in the file.
| Text editor command | Description |
|---|---|
| , | Repeat the last f, F, t or T command in the reverse direction. |
| / | Search the file forward for the string specified after the forward slash (/). |
| ; | Repeat the last f, F, t or T command. |
| ? | Search the file backward for the string specified after the ?. |
| F | Search the current line backward for the character specified after the F command. If found, move the cursor to the position. |
| N | Repeat the last search done by forward slash (/) or question mark (?) in the backward direction. |
| T | Search the current line backward for the character specified after the T command, and move to the column after the character, if it is found. |
| f | Search the current line for the character specified after the f command. If found, move the cursor to the position. |
| n | Repeat the last search done by forward slash (/) or question mark (?) in the forward direction |
| t | Search the current line for the character specified after the t command, and move to the column before the character, if it is found. |
The following table describes the commands to manipulate character and line formatting.
| Text editor command | Description |
|---|---|
| ~ | Switch the case of the character under the cursor. |
| < | Shift the lines up to the left by one shiftwidth. The << command shifts the current line to the left and can be specified with a count. |
| > | Shift the lines up to the right by one shiftwidth. The >> command shifts the current line to the right and can be specified with a count. |
| J | Join the current line with the next one. A count joins that many lines. |
The following table describes miscellaneous commands.
| Text editor command | Description |
|---|---|
| ^G | Show the current file name and the status. |
| ^L | Clear and redraw the screen. |
| ^R | Redraw the screen removing false lines. |
| ^[ | Cancel a partially formed command (Esc). |
| ^^ | Go back to the last file edited. |
| & | Repeat the previous :s command. |
| . | Repeat the last command that modified the file. |
| : | Begin typing a line editing command. The command is executed when the user presses Enter. |
| @ | Type the command stored in the specified buffer. |
| U | Restore the current line to the previous state before the cursor entered the line. |
| m | Mark the current position with the character specified after the m command. |
| u | Undo the last change to the file. Typing u again will redo the change. |
| ZZ | Exit the editor, saving if any changes were made. |
From the text editor, use the : command to enter a line editing command. To modify more than one line using specific commands (such as :s and :w), the range must be specified before the command. For example, to substitute lines 3 through 15, the command is :3,15s/from/this/g.
The following table describes the commonly used line editing commands.
| Text editor command | Description |
|---|---|
| :ab string strings | Abbreviation. If a word is typed in the text editor corresponding to string1, the editor automatically inserts the corresponding words. For example, the abbreviation ":ab vprn Virtual Private Network" inserts the words "Virtual Private Network" whenever the word "vprn" is typed. |
| :map keys new_seq | Map a key or a sequence of keys to another key or sequence of keys. |
| :q | Quit the text editor. If changes have been made, the editor issues a warning message. |
| :q! | Quit the text editor without saving changes. |
| :s/pattern/to_pattern/options | Substitute the specified pattern with the string in the to_pattern. Without options, only the first occurrence of the pattern is substituted. If a g is specified, all occurrences are substituted. |
| :set [all] | Sets some customizing options. The :set all command displays all options. |
| :una string | Removes the abbreviation previously defined by :ab. |
| :unm keys | Removes the mapping defined by :map. |
| :vi filename | Starts editing a new file. If changes have not been saved, the editor displays a warning message. |
| :w | Write contents of the current file. |
| :w filename | Write the contents of the buffer to the file name specified. |
| :w >> filename | Append the contents of the buffer to the file name. |
| :wq | Write the contents of the buffer and quit. |
File management tasks in the classic CLI
The following sections are basic system tasks that can be performed in the classic CLI.
For more information about the supported classic CLI commands, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide.
When a file system operation is performed that can potentially remove or overwrite a file system entry, a prompt appears to confirm the action. The force keyword performs the operation without displaying the confirmation prompt.
All the commands can operate on the local file system. The following table indicates the commands that also support remote file operations.
| Command | local-url | ftp-url | tftp-url | http-url | https-url |
|---|---|---|---|---|---|
attrib |
✓ |
||||
cd |
✓ |
✓ |
|||
copy |
✓ |
✓ |
source only |
✓ |
✓ |
|
copy (recursive) |
✓ |
✓ |
|||
|
checksum |
✓ |
✓ |
✓ |
||
delete |
✓ |
✓ |
✓ |
✓ |
|
dir |
✓ |
✓ |
|||
md |
✓ |
✓ |
|||
move |
✓ |
✓ |
✓ |
✓ |
|
|
move (recursive) |
✓ |
✓ |
|||
rd |
✓ |
✓ |
|||
scp |
source only |
||||
type |
✓ |
✓ |
✓ |
✓ |
✓ |
unzip |
✓ |
✓ |
source only |
||
version |
✓ |
✓ |
✓ |
||
vi |
✓ |
Displaying directory and file information
Use the dir command to display a list of files on a file system, the type command to display the contents of a file, and the version command to display the version of an SR OS .tim image file.
The following example shows the usage of these commands.
A:node-2>file cf1:\ # dir
Volume in drive cf1 on slot A has no label.
Directory of cf1:\
01/01/1980 12:00a 7597 test.cfg
01/01/1980 12:00a 957 b.
08/19/2001 02:14p 230110 BOOTROM.SYS
01/01/1980 12:00a 133 NVRAM.DAT
04/03/2003 05:32a 1709 103.ndx
01/28/2003 05:06a 1341 103.cftg.ndx
01/28/2003 05:06a 20754 103.cftg
04/05/2003 02:20a <DIR> test
15 File(s) 338240 bytes.
3 Dir(s) 1097728 bytes free.
A:node-2>file cf1:\ # type fred.cfg
# Saved to /cflash1/fred.cfg
# Generated THU FEB 21 01:30:09 2002 UTC
exit all
config
#------------------------------------------
# Chassis Commands
#------------------------------------------
card 2 card-type faste-tx-32
exit
#------------------------------------------
# Interface Commands
#------------------------------------------
# Physical port configuration
interface faste 2/1
shutdown
mode network
exit
interface faste 2/2
shutdown
exit
interface faste 2/3
shutdown
exit
interface faste 2/4
A:node-2>file cf1:\ # version boot.tim
TiMOS-L-1.0.B3-8
A:node-2>file cf1:\ #
Modifying file attributes
The system administrator can change the read-only attribute in the local file.
Enter the attrib command with no options to display the contents of the directory and the file attributes.
The following example shows the file configuration.
A:node-2>file cf3:\ # attrib
cf3:\bootlog.txt
cf3:\bof.cfg
cf3:\boot.ldr
cf3:\bootlog_prev.txt
cf3:\BOF.SAV
A:node-2>file cf3:\ # attrib +r BOF.SAV
A:node-2>file cf3:\ # attrib
cf3:\bootlog.txt
cf3:\bof.cfg
cf3:\boot.ldr
cf3:\bootlog_prev.txt
R cf3:\BOF.SAV
Creating directories
New directories can be created in the local file system, one level at a time. Use the md command to create a new directory. The cd command navigates to different directories. The following example shows the creation of three levels of directories.
A:node-2>file cf3:\ # md test1
A:node-2>file cf3:\ # cd test1
A:node-2>file cf3:\test1\ # md test2
A:node-2>file cf3:\test1\ # cd test2
A:node-2>file cf3:\test1\test2\ # md test3
A:node-2>file cf3:\test1\test2\ # cd test3
A:node-2>file cf3:\test1\test2\test3\ #Copying files
Use the copy command to copy files to or from a flash device or an FTP/TFTP server. The copy command supports wildcards.
The scp command copies files between hosts on a network. It uses SSH for data transfer, and uses the same authentication and provides the same security as SSH. The source file for the scp command must be local. The file must reside on the router. The destination file has to be of the format: user@host:file-name. The destination does not need to be local.
The following example shows copy and scp command usage.
Image file and network host copy
A:node-2>file copy 104.cfg cf1:\test1\test2\test3\test.cfg
A:node-2>file scp file1 admin@192.168.0.1:cf1:\file1
A:node-2>file scp file2 user2@192.168.0.1:/user2/file2
A:node-2>file scp cf2:/file3 admin@192.168.0.1:\file3
Use the recursive keyword to recursively copy files and directories. If files or directories already exist, the operator is prompted to overwrite them. If the force option is specified, a positive response to the overwrite prompts is assumed. The operator is not prompted for confirmation and the existing files or directories are overwritten.
The following example shows a recursive directory copy.
Recursive directory copy
A:node-2# file dir
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 06:11p 101 NVRAM.DAT
09/19/2021 07:22p SUPPORT/
09/19/2021 06:11p SYSLINUX/
09/19/2021 06:11p TIMOS/
09/23/2021 09:03a 27459 bootlog.txt
09/20/2021 09:56a 27326 bootlog_prev.txt
09/23/2021 01:21p 319 nvsys.info
09/21/2021 07:19p recursive3/
09/23/2021 08:22a ssh/
7 File(s) 55402 bytes.
6 Dir(s) 612319232 bytes free.
A:node-2# file dir recursive3
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive3
09/21/2021 07:18p ./
09/21/2021 07:18p ../
09/21/2021 07:19p 7 file1.txt
09/21/2021 07:19p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612319232 bytes free.
A:node-2# file copy recursive3 recursive1 recursive
Copying directory cf3:\recursive3
Copying directory cf3:\recursive3\recursive2
Copying file cf3:\recursive3\recursive2\file2.txt ... OK
Copying file cf3:\recursive3\recursive2\file3.txt ... OK
Copying file cf3:\recursive3\file1.txt ... OK
2 dir(s) and 3 file(s) copied.
A:sros# file dir
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 06:11p 101 NVRAM.DAT
09/19/2021 07:22p SUPPORT/
09/19/2021 06:11p SYSLINUX/
09/19/2021 06:11p TIMOS/
09/23/2021 09:03a 27459 bootlog.txt
09/20/2021 09:56a 27326 bootlog_prev.txt
09/23/2021 01:21p 319 nvsys.info
09/23/2021 02:42p recursive1/
09/21/2021 07:19p recursive3/
09/23/2021 08:22a ssh/
7 File(s) 55402 bytes.
7 Dir(s) 612298752 bytes free.
A:node-2# file dir recursive1
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive1
09/23/2021 02:42p ./
09/23/2021 02:42p ../
09/23/2021 02:42p 7 file1.txt
09/23/2021 02:42p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612298752 bytes free.Moving files
Files or directories can be moved from one location to another.
The move command supports wildcards, recursively moves files and directories, and overwrites existing content without prompting for confirmation.
The following example shows the usage of the file dir and move commands.
Moving files and directories
A:node-2>file cf3:\ # dir
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/28/2021 11:42a 933 BOF.CFG
09/28/2021 11:42a 166 NVRAM.DAT
09/29/2021 03:51p 12831 bootlog.txt
09/29/2021 03:46p 12828 bootlog_prev.txt
04/16/2014 10:15a 0 config.cfg
09/29/2021 03:51p 318 nvsys.info
04/16/2014 10:15a <DIR> syslinux/
09/29/2021 03:55p 12831 test.txt
09/29/2021 03:54p <DIR> test_dir1/
04/16/2014 10:15a <DIR> timos/
7 File(s) 39907 bytes.
3 Dir(s) 14452736 bytes free.
A:node-2>file cf3:\ # move test.txt /test_dir1/test_dir2/test_dir3
Moving file cf3:\test.txt ... OK
cf3:\test.txt
A:node-2>file cf3:\ # dir
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/28/2021 11:42a 933 BOF.CFG
09/28/2021 11:42a 166 NVRAM.DAT
09/29/2021 03:51p 12831 bootlog.txt
09/29/2021 03:46p 12828 bootlog_prev.txt
04/16/2014 10:15a 0 config.cfg
09/29/2021 03:51p 318 nvsys.info
04/16/2014 10:15a <DIR> syslinux/
09/29/2021 03:54p <DIR> test_dir1/
04/16/2014 10:15a <DIR> timos/
6 File(s) 27076 bytes.
3 Dir(s) 14452736 bytes free.
A:node-2>file cf3:\ # dir test_dir1/test_dir2/test_dir3
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test_dir1\test_dir2\test_dir3
09/29/2021 03:54p <DIR> ./
09/29/2021 03:54p <DIR> ../
09/29/2021 03:55p 12831 test.txt
1 File(s) 12831 bytes.
2 Dir(s) 14452736 bytes free.The following example shows a recursive move of the recursive1 directory to recursive3.
Recursive directory move
A:node-2>file cf3:\ # dir
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 06:11p 101 NVRAM.DAT
09/19/2021 07:22p SUPPORT/
09/19/2021 06:11p SYSLINUX/
09/19/2021 06:11p TIMOS/
09/23/2021 09:03a 27459 bootlog.txt
09/20/2021 09:56a 27326 bootlog_prev.txt
09/23/2021 01:21p 319 nvsys.info
09/23/2021 02:42p recursive1/
09/23/2021 08:22a ssh/
7 File(s) 55402 bytes.
7 Dir(s) 612311040 bytes free.
A:node-2>file cf3:\ # dir recursive1
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive1
09/23/2021 02:42p ./
09/23/2021 02:42p ../
09/23/2021 02:42p 7 file1.txt
09/23/2021 02:42p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612311040 bytes free.
A:node-2>file cf3:\ # move recursive1 recursive4
Moving file cf3:\recursive1 ... OK
cf3:\recursive1
A:sros>file cf3:\ # dir
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 06:11p 101 NVRAM.DAT
09/19/2021 07:22p SUPPORT/
09/19/2021 06:11p SYSLINUX/
09/19/2021 06:11p TIMOS/
09/23/2021 09:03a 27459 bootlog.txt
09/20/2021 09:56a 27326 bootlog_prev.txt
09/23/2021 01:21p 319 nvsys.info
09/23/2021 02:42p recursive4/
09/23/2021 08:22a ssh/
7 File(s) 55402 bytes.
7 Dir(s) 612311040 bytes free.
A:node-2>file cf3:\ # dir recursive4
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive4
09/23/2021 02:42p ./
09/23/2021 02:42p ../
09/23/2021 02:42p 7 file1.txt
09/23/2021 02:42p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612311040 bytes free.Deleting files and removing directories
Use the delete and rd commands to delete files and remove directories. Directories can be removed even if they contain files and subdirectories. To remove a directory that contains files and subdirectories, use the rd rf command. When files or directories are deleted, they cannot be recovered.
The force option deletes the file or directory without prompting the user to confirm.
The following example shows commands to delete files and remove directories.
A:node-2>file cf1:\test1\ # delete test.cfg
A:node-2>file cf1:\test1\ # delete abc.cfg
A:node-2>file cf1:\test1\test2\ # cd test3
A:node-2>file cf1:\test1\test2\test3\ # cd ..
A:node-2>file cf1:\test1\test2\ # rd test3
A:node-2>file cf1:\test1\test2\ # cd ..
A:node-2>file cf1:\test1\ # rd test2
A:node-2>file cf1:\test1\ # cd ..
A:node-2>file cf1:\ # rd test1
A:node-2>file cf1:\ #Unzipping files
Use the unzip command to expand the contents of a ZIP file to the local file system. Any file that is zipped using the store, deflate, or zip64 compression methods can be unzipped. An example is the SR OS software image available from the Nokia customer support portal.
The source ZIP file location can be a locally installed solid-state storage device or a remote FTP or TFTP server.
The create-destination keyword ensures that any non-existent directory structure that is explicitly entered as the destination file URL is created as part of the unzip operation. This parameter is required to create new directories.
-
The destination for the unzipped files and directories must be a locally installed solid-state storage device in the active CPM.
-
ZIP filenames, or the filenames of any contained files, must not include special characters.
The following example shows the unzip command syntax.
A:test# file unzip demo.zip cf3:/mynewfolder/mynewsubfolder create-destination force
Verifying cf3:\demo.zip .. ... OK
Unzipping cf3:\demo.zip to cf3:\mynewfolder\mynewsubfolder\ .. .Processing demodir/
Processing demodir/myfile1.txt
Processing demodir/myfile2.txt
Processing demodir/demosubdir/
Processing demodir/demosubdir/myfile3.txt
Writing...OK
Repairing the file system
Use the repair command to check a compact flash device for errors and repair any errors found.
The following example shows the command syntax.
A:node-2>file cf3:\ # repair
Checking drive cf3: on slot A for errors...
Drive cf31: on slot A is OK.Displaying file checksums
The following example shows how to check the version of an SR OS .tim image file.
A:node-2>file cf3:\ # version cpm.tim
TiMOS-C-20.10.R1
Wed Nov 4 09:18:17 PST 2020 by builder in /builds/c/2010B/R1/panos/main/sros
A:node-2>file cf3:\ # version cpm.tim check
TiMOS-C-20.10.R1
Wed Nov 4 09:18:17 PST 2020 by builder in /builds/c/2010B/R1/panos/main/sros
Checking file ... OKThe following example shows the output of the checksum operation to compute and display a checksum based on the MD5 and SHA256 algorithms for the config.cfg file on cf3.
A:node-2# file checksum md5 cf3:config.cfg
Checking file cf3:config.cfg ...
c65699dc05e6e35a2172eaac80485aa2
A:node-2# file checksum sha256 cf3:config.cfg
Checking file cf3:config.cfg ...
a1a813a696be04906f9faf1df9db0f90a990ff51cb3383099ade21241203bc1cFile management tasks in the MD-CLI
The following sections are basic system tasks that can be performed in the MD-CLI.
For more information about the supported MD-CLI commands, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide.
When a file system operation is performed that can potentially remove or overwrite a file system entry, a prompt appears to confirm the action. The force keyword performs the operation without displaying the confirmation prompt.
All the commands can operate on the local file system. The following table indicates the commands that also support remote file operations.
| Command | local-url | ftp-url | tftp-url | http-url | https-url |
|---|---|---|---|---|---|
change-directory |
✓ |
✓ |
|||
checksum |
✓ |
✓ |
✓ |
||
copy |
✓ |
✓ |
source only |
✓ |
✓ |
|
copy (recursive) |
✓ |
✓ |
|||
list |
✓ |
✓ |
|||
make-directory |
✓ |
✓ |
|||
move |
✓ |
✓ |
✓ |
✓ |
|
|
move (recursive) |
✓ |
✓ |
|||
permission |
✓ |
||||
remove |
✓ |
✓ |
✓ |
✓ |
|
remove-directory |
✓ |
✓ |
|||
show |
✓ |
✓ |
✓ |
✓ |
✓ |
unzip |
✓ |
✓ |
source only |
||
version |
✓ |
✓ |
✓ |
Displaying directory and file information
Use the list command to list the files on a file system, with an option to indicate the list order based on the date, name, or size of the files. The show command displays the contents of a specified file or multiple files. The version command displays the version of an SR OS .tim image file.
The following example shows the command syntax.
[/file "cf3:\"]
A:admin@node-2# list
Volume in drive cf3 on slot A is .
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/01/2020 11:27p <DIR> .ssh/
01/01/1980 12:00a 170 NVRAM.DAT
01/01/1980 12:00a 679 bof.cfg
09/01/2020 11:27p 319 nvsys.info
09/01/2020 11:27p 1 restcntr.txt
09/02/2020 04:32p <DIR> tstdir/
4 File(s) 1169 bytes.
2 Dir(s) 0 bytes free.
[/file "cf3:\"]
A:admin@node-2# list size
Volume in drive cf3 on slot A is .
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/01/2020 11:27p <DIR> .ssh/
09/02/2020 04:32p <DIR> tstdir/
09/01/2020 11:27p 1 restcntr.txt
01/01/1980 12:00a 170 NVRAM.DAT
09/01/2020 11:27p 319 nvsys.info
01/01/1980 12:00a 679 bof.cfg
4 File(s) 1169 bytes.
2 Dir(s) 0 bytes free.
[/file "cf3:\"]
A:admin@node-2# show md-config.cfg
File: md-config.cfg
-------------------------------------------------------------------------------
configure {
card 1 {
mda 1 {
}
}
log {
filter 1001 {
entry 10 {
description "Collect only events of major severity or higher"
action forward
match {
severity {
gte major
}
}
}
}
log-id 99 {
description "Default System Log"
source {
main true
Press Q to quit, Enter to print next line or any other key to print next page.Modifying file attributes
The system administrator can change the attribute of a local file or files in a directory.
Enter the permission command with no options to display the contents of the directory and the file attributes.
A single local file can be specified or the wildcard character (*) can be used to indicate multiple files. If no URL is specified, the command applies to all files in the directory.
The following example shows the command syntax. A file with an ‟R” preceding the filename indicate the file is read-only; otherwise, the file is read-write.
[/file "cf3:\"]
A:admin@node-2# permission
cf3:\NVRAM.DAT
cf3:\bof.cfg
cf3:\nvsys.info
cf3:\restcntr.txt
cf3:\.ssh
cf3:\my.txt
[/file "cf3:\"]
A:admin@node-2# permission read-only my.txt
[/file "cf3:\"]
A:admin@node-2# permission
cf3:\NVRAM.DAT
cf3:\bof.cfg
cf3:\nvsys.info
cf3:\restcntr.txt
cf3:\.ssh
R cf3:\my.txt
[/file "cf3:\"]
A:admin@node-2# permission read-only
[/file "cf3:\"]
A:admin@node-2# permission
R cf3:\NVRAM.DAT
R cf3:\bof.cfg
R cf3:\nvsys.info
R cf3:\restcntr.txt
R cf3:\.ssh
R cf3:\my.txt
Creating and navigating directories
New directories can be created in the local file system, one level at a time.
Use the make-directory command to create a new directory.
The change-directory command navigates to different directories.
The following example shows the creation of three levels of directories.
[/file "cf3:\"]
A:admin@node-2# make-directory test1
[/file "cf3:\"]
A:admin@node-2# change-directory test1
[/file "cf3:\test1"]
A:admin@node-2# make-directory test2
[/file "cf3:\test1"]
A:admin@node-2# change-directory test2
[/file "cf3:\test1\test2"]
A:admin@node-2# make-directory test3
[/file "cf3:\test1\test2"]
A:admin@node-2# change-directory test3
[/file "cf3:\test1\test2\test3"]
A:admin@node-2# change-directory ..
[/file "cf3:\test1\test2"]
A:admin@node-2#
Copying files
Use the copy command to copy files to or from a flash device, or an FTP, TFTP, or SSH server. The copy command supports wildcards.
Use the recursive option to recursively copy files and directories. If files or directories already exist, the user is prompted to overwrite them. Use the force option to automatically overwrite the existing files or directories, without being prompted for confirmation.
The following example shows how to copy the config.cfg file to the test_dir1 directory.
Local file copy
[/]
A:admin@node-2# file list test_dir1
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test_dir1
09/29/2021 05:07p <DIR> ./
09/29/2021 05:07p <DIR> ../
0 File(s) 0 bytes.
2 Dir(s) 14458880 bytes free.
[/]
A:admin@node-2# file list
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/28/2021 11:43a 931 BOF.CFG
09/28/2021 11:43a 165 NVRAM.DAT
09/28/2021 04:34p 11319 bootlog.txt
09/28/2021 03:50p 11259 bootlog_prev.txt
09/29/2021 05:08p 11319 config.cfg
09/28/2021 04:34p 319 nvsys.info
04/16/2014 10:15a <DIR> syslinux/
09/29/2021 05:08p <DIR> test_dir1/
04/16/2014 10:15a <DIR> timos/
7 File(s) 35312 bytes.
3 Dir(s) 14458880 bytes free.
[/]
A:admin@node-2# file copy config.cfg test_dir1
Copying file cf3:\config.cfg ... OK
1 file copied.
[/]
A:admin@node-2# file list test_dir1
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test_dir1
09/29/2021 05:07p <DIR> ./
09/29/2021 05:07p <DIR> ../
09/29/2021 05:09p 11319 config.cfg
1 File(s) 11319 bytes.
2 Dir(s) 14447104 bytes free.The following example shows how to copy the config.cfg file to a file on an SSH server.
File copy to SSH server
[/]
A:admin@node-2# file copy cf3:config.cfg scp://user@10.231.216.68:~/
user@10.231.216.68's password:
config.cfg 100% 625 0.6KB/s 00:00
The following example shows a recursive move of the recursive4 directory to recursive5.
Recursive directory move
[/]
A:admin@node-2# file list
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 07:22p SUPPORT/
09/23/2021 09:03a 27459 bootlog.txt
09/20/2021 09:56a 27326 bootlog_prev.txt
09/23/2021 01:21p 319 nvsys.info
09/23/2021 02:42p recursive4/
09/23/2021 08:22a ssh/
7 File(s) 55402 bytes.
7 Dir(s) 612311040 bytes free.
[/]
A:admin@node-2# file copy recursive4 recursive5 recursive
Copying directory cf3:\recursive4
Copying directory cf3:\recursive4\recursive2
Copying file cf3:\recursive4\recursive2\file2.txt ... OK
Copying file cf3:\recursive4\recursive2\file3.txt ... OK
Copying file cf3:\recursive4\file1.txt ... OK
2 dir(s) and 3 file(s) copied.Moving files
Files or directories can be moved from one location to another. The move command recursively moves files and directories, and overwrites existing content without prompting for confirmation. The move command supports wildcards.
The following example moves the md-config.cfg file to the test_dir1 directory.
Moving files and directories
[/file "cf3:\"]
A:admin@node-2# list test_dir1
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test_dir1
09/29/2021 05:07p <DIR> ./
09/29/2021 05:07p <DIR> ../
0 File(s) 0 bytes.
2 Dir(s) 14458880 bytes free.
[/file "cf3:\"]
A:admin@node-2# list
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/28/2021 11:43a 931 BOF.CFG
09/28/2021 11:43a 165 NVRAM.DAT
09/28/2021 04:34p 11319 bootlog.txt
09/28/2021 03:50p 11259 bootlog_prev.txt
09/29/2021 05:08p 11319 md-config.cfg
09/28/2021 04:34p 319 nvsys.info
04/16/2014 10:15a <DIR> syslinux/
09/29/2021 05:09p <DIR> test_dir1/
04/16/2014 10:15a <DIR> timos/
7 File(s) 35312 bytes.
3 Dir(s) 14458880 bytes free.
[/file "cf3:\"]
A:admin@node-2# move md-config.cfg test_dir1
Moving file cf3:\md-config.cfg ... OK
cf3:\md-config.cfg
[/file "cf3:\"]
A:admin@node-2# list test_dir1
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test_dir1
09/29/2021 05:07p <DIR> ./
09/29/2021 05:07p <DIR> ../
09/29/2021 05:08p 11319 md-config.cfg
1 File(s) 11319 bytes.
2 Dir(s) 14458880 bytes free.
[/file "cf3:\"]
A:admin@node-2# list
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/28/2021 11:43a 931 BOF.CFG
09/28/2021 11:43a 165 NVRAM.DAT
09/28/2021 04:34p 11319 bootlog.txt
09/28/2021 03:50p 11259 bootlog_prev.txt
09/28/2021 04:34p 319 nvsys.info
04/16/2014 10:15a <DIR> syslinux/
10/01/2021 04:17p <DIR> test_dir1/
04/16/2014 10:15a <DIR> timos/
6 File(s) 23993 bytes.
3 Dir(s) 14458880 bytes free.The following example shows a recursive move of the recursive1 directory to recursive3.
Recursive directory move
[/file "cf3:\"]
A:admin@node-2# list
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 07:22p SUPPORT/
09/20/2021 09:56a 27326 bootlog.txt
09/20/2021 02:55p 319 nvsys.info
09/21/2021 07:19p recursive1/
09/20/2021 09:55a ssh/
6 File(s) 27943 bytes.
6 Dir(s) 612347904 bytes free.
[/file "cf3:\"]
A:admin@node-2# list recursive1
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive1
09/21/2021 07:18p ./
09/21/2021 07:18p ../
09/21/2021 07:19p 7 file1.txt
09/21/2021 07:19p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612347904 bytes free.
[/file "cf3:\"]
A:admin@node-2# list recursive1/recursive2
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive1\recursive2
09/21/2021 07:19p ./
09/21/2021 07:19p ../
09/21/2021 07:19p 7 file2.txt
09/21/2021 07:19p 7 file3.txt
2 File(s) 14 bytes.
2 Dir(s) 612347904 bytes free.
[/file "cf3:\"]
A:admin@sros# move recursive1 recursive3
Moving file cf3:\recursive1 ... OK
cf3:\recursive1
[/file "cf3:\"]
A:admin@node-2# list
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\
09/19/2021 06:11p 196 BOF.CFG
09/19/2021 06:11p 0 CONFIG.CFG
09/19/2021 06:11p 101 NVRAM.DAT
09/19/2021 07:22p SUPPORT/
09/19/2021 06:11p SYSLINUX/
09/19/2021 06:11p TIMOS/
09/20/2021 09:56a 27326 bootlog.txt
09/20/2021 02:55p 319 nvsys.info
09/21/2021 07:19p recursive3/
09/20/2021 09:55a ssh/
6 File(s) 27943 bytes.
6 Dir(s) 612347904 bytes free.
[/file "cf3:\"]
A:admin@node-2# list recursive3
Volume in drive cf3 on slot A is SROS VM.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\recursive3
09/21/2021 07:18p ./
09/21/2021 07:18p ../
09/21/2021 07:19p 7 file1.txt
09/21/2021 07:19p recursive2/
1 File(s) 7 bytes.
3 Dir(s) 612347904 bytes free.Deleting files and removing directories
Use the remove and remove-directory commands to delete files and remove directories. Directories can be removed even if they contain files or subdirectories.
The following example shows removing the test1/test2/test3 directory.
[/file "cf3:\test1\test2"]
A:admin@node-2# list
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test1\test2
09/01/2020 08:13p <DIR> ./
09/01/2020 08:13p <DIR> ../
09/04/2020 06:36p 874 bof.cfg
04/28/2020 03:15p 11401 md-config.cfg
09/04/2020 06:43p <DIR> test3/
2 File(s) 12275 bytes.
3 Dir(s) 10641920 bytes free.
[/file "cf3:\test1\test2"]
A:admin@node-2# list test3
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test1\test2\test3
09/01/2020 08:13p <DIR> ./
09/01/2020 08:13p <DIR> ../
09/04/2020 06:43p 11788 conf3.cfg
09/04/2020 04:24p 6645 mybof.cfg
2 File(s) 18433 bytes.
2 Dir(s) 10641920 bytes free.
[/file "cf3:\test1\test2"]
A:admin@node-2# remove-directory test3 ?
remove-directory
force - Force removal without prompting
recursive - Remove directory and its content recursively
[/file "cf3:\test1\test2"]
A:admin@node-2# remove-directory test3 recursive
Deleting all subdirectories and files in specified directory. y/n ?y
Deleting file cf3:\test1\test2\test3\mybof.cfg ... OK
Deleting file cf3:\test1\test2\test3\conf3.cfg ... OK
Deleting directory cf3:\test1\test2\test3 ... OK
[/file "cf3:\test1\test2"]
A:admin@node-2# list
Volume in drive cf3 on slot A is TIMOS_VM_CF.
Volume in drive cf3 on slot A is formatted as FAT32
Directory of cf3:\test1\test2
09/01/2020 08:13p <DIR> ./
09/01/2020 08:13p <DIR> ../
09/04/2020 06:36p 874 bof.cfg
04/28/2020 03:15p 11401 md-config.cfg
2 File(s) 12275 bytes.
2 Dir(s) 10661376 bytes free.
Unzipping files
Use the unzip command to expand the contents of a ZIP file to the local file system. Any file zipped using the store, deflate, or zip64 compression methods can be unzipped. An example is the SR OS software image available from the Nokia customer support portal.
The source ZIP file location can be a locally installed solid-state storage device or a remote FTP or TFTP server.
The create-destination configuration option ensures that any non-existent directory structure that is explicitly entered as the destination file URL is created as part of the unzip operation. This parameter is required to create new directories.
The destination for the unzipped files and directories must be a locally installed solid-state storage device in the active CPM.
ZIP filenames, or the filenames of any contained files, must not include special characters.
The following example shows a file being unzipped.
[/file "cf3:\"]
A:admin@node-2# unzip demo.zip cf3:/mynewfolder/mynewsubfolder create-destination
force
Verifying cf3:\demo.zip .. ... OK
Unzipping cf3:\demo.zip to cf3:\mynewfolder\mynewsubfolder\ .. .Processing demodir/
Processing demodir/myfile1.txt
Processing demodir/myfile2.txt
Processing demodir/demosubdir/
Processing demodir/demosubdir/myfile3.txt
Writing...OK
Repairing the file system
Use the repair command to check a compact flash device for errors and repair any errors found.
The following example shows the command syntax.
[/file "cf3:\"]
A:admin@node-2# repair cflash-id cf3:
Checking drive cf3: on slot A for errors...
Drive cf3: on slot A is OK.
[/file "cf3:\"]
A:admin@node-2# repair
Checking drive cf3: on slot A for errors...
Drive cf3: on slot A is OK.
Displaying file checksums
Use the checksum command to display file checksums.
The following example shows the output of the operation to check an SR OS .tim image file checksum.
SR OS .tim image file checksum
[/file "cf3:\"]
A:admin@node-2# checksum image cpm.tim
TiMOS-C-20.10.R1
Wed Nov 4 09:18:17 PST 2020 by builder in /builds/c/2010B/R1/panos/main/sros
Checking file ... OK
The following example shows the output of the checksum operation to compute and display a checksum based on the MD5 and SHA256 algorithms for the config.cfg file on cf3.
Configure file checksum based on MD5 and SHA256 algorithms
[/]
A:admin@node2# file checksum md5 cf3:config.cfg
Checking file cf3:config.cfg
c65699dc05e6e35a2172eaac80485aa2
[/]
A:admin@node2# file checksum sha256 cf3:config.cfg
Checking file cf3:config.cfg
a1a813a696be04906f9faf1df9db0f90a990ff51cb3383099ade21241203bc1c