redundancy commands

configure 
redundancy 
apply-groups reference
apply-groups-exclude reference
bgp-evpn 
ethernet-segment 
activation-timer number
apply-groups reference
apply-groups-exclude reference
boot-timer number
bgp-mh 
apply-groups reference
apply-groups-exclude reference
site 
activation-timer number
boot-timer number
min-down-timer number
cert-sync boolean
mgmt-ethernet 
revert number
multi-chassis 
ipsec-domain number 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
designated-role keyword
priority number
revertive boolean
tunnel-group reference
options 
sub-mgmt 
apply-groups reference
apply-groups-exclude reference
dhcp-leasetime-threshold number
peer (ipv4-address-no-zone | ipv6-address-no-zone) 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
authentication-key string
description string
mc-endpoint 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
bfd boolean
boot-timer number
hold-on-neighbor-failure number
keep-alive-interval number
passive-mode boolean
system-priority number
mc-ipsec 
apply-groups reference
apply-groups-exclude reference
bfd-liveness boolean
discovery-interval 
boot number
interval-secs number
domain reference 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
hold-on-neighbor-failure number
keep-alive-interval number
tunnel-group reference 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
peer-group number
priority number
mc-lag 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
hold-on-neighbor-failure number
keep-alive-interval number
lag reference 
apply-groups reference
apply-groups-exclude reference
lacp-key number
remote-lag string
source-bmac-lsb (keyword | bmac-lsb)
system-id string
system-priority number
mc-ring 
apply-groups reference
apply-groups-exclude reference
ring string 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
in-band-control-path 
debounce boolean
dst-ip string
interface string
max-debounce-time number
service-name string
path-b 
apply-groups reference
apply-groups-exclude reference
range start number end number 
wildcard-saps boolean
path-excl 
apply-groups reference
apply-groups-exclude reference
range start number end number 
wildcard-saps boolean
ring-node string 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
dst-ip string
interval number
service-name string
src-ip string
src-mac (keyword | ring-node-mac-address)
vlan string
srrp-instance number 
type keyword
peer-name string
source-address (ipv4-address-no-zone | ipv6-address-no-zone)
sync 
admin-state keyword
apply-groups reference
apply-groups-exclude reference
diameter-node 
node reference 
apply-groups reference
apply-groups-exclude reference
sync-tag string
igmp boolean
igmp-snooping boolean
ipsec boolean
l2tp boolean
local-dhcp-server boolean
mc-ring boolean
mld boolean
mld-snooping boolean
nat 
nat-group reference 
apply-groups reference
apply-groups-exclude reference
sync-tag string
pim-snooping 
saps boolean
spoke-sdps boolean
python boolean
srrp boolean
sub-host-trk boolean
sub-mgmt 
ipoe boolean
pppoe boolean
wlan-gw boolean
tags 
lag reference 
apply-groups reference
apply-groups-exclude reference
range start string end string 
apply-groups reference
apply-groups-exclude reference
sync-tag string
sync-tag string
port reference 
apply-groups reference
apply-groups-exclude reference
range start string end string 
apply-groups reference
apply-groups-exclude reference
sync-tag string
sync-tag string
pw-port reference 
apply-groups reference
apply-groups-exclude reference
range start string end string 
apply-groups reference
apply-groups-exclude reference
sync-tag string
sync-tag string
sdp number 
apply-groups reference
apply-groups-exclude reference
range start number end number 
apply-groups reference
apply-groups-exclude reference
sync-tag string
sync-tag string
track-srrp number 
apply-groups reference
apply-groups-exclude reference
l2tp-tunnel-id-range 
end number
start number
transport-encryption 
application keyword 
apply-groups reference
apply-groups-exclude reference
keychain reference
tunnel-group number 
apply-groups reference
apply-groups-exclude reference
sync-tag string
rollback-sync keyword
srrp 
apply-groups reference
apply-groups-exclude reference
auto-srrp-id-range 
end number
start number
switchover-exec string
synchronize keyword

redundancy command descriptions

redundancy

Synopsis Enter the redundancy context
Context configure redundancy
Treeredundancy
Introduced16.0.R1

Platforms

All

bgp-evpn

Synopsis Enter the bgp-evpn context
Context configure redundancy bgp-evpn
Treebgp-evpn
Introduced16.0.R1

Platforms

All

ethernet-segment
Synopsis Enter the ethernet-segment context
Contextconfigure redundancy bgp-evpn ethernet-segment
Treeethernet-segment
Introduced16.0.R1

Platforms

All

boot-timer number
Synopsis Time before BGP EVPN multi-homing DF election algorithm
Contextconfigure redundancy bgp-evpn ethernet-segment boot-timer number
Treeboot-timer

Description

This command allows the necessary time for the control plane protocols to come up upon PE boot-up before bringing up the ESs and running the DF algorithm.

The following considerations apply to this command:

  • The boot-timer command must provide enough time to allow the IOMs and BGP sessions to come up before exchanging ES routes and running the DF election for each EVI or ISID.

  • The boot-timer is synchronized across CPMs and is relative to the system up time; it is not changed or reset upon CPM switchover.

  • The boot-timer is never interrupted (the es-activation-timer, however, can be interrupted if there is a new event triggering the DF election).

  • The boot-timer runs per EVI or ISID on the ESs in the system. If the system up time (time the system has been up since the last reboot) is less than the boot-timer value, the system does not run the DF election for any EVI or ISID. When the boot-timer value expires, the DF election runs, and if the system is elected DF for the EVI or ISID, the es-activation-timer is triggered.

  • The system does not advertise ES routes until the boot timer expires, which guarantees that the peer ES PEs only run the DF election when the PE is ready to become the DF, if required.

Range0 to 1800
Unitsseconds
Default 10
Introduced16.0.R1

Platforms

All

bgp-mh

Synopsis Enter the bgp-mh context
Context configure redundancy bgp-mh
Treebgp-mh
Introduced16.0.R1

Platforms

All

site
Synopsis Enter the site context
Context configure redundancy bgp-mh site
Treesite
Introduced16.0.R1

Platforms

All

boot-timer number
Synopsis Wait time after reboot to run the DF election algorithm
Contextconfigure redundancy bgp-mh site boot-timer number
Treeboot-timer
Range0 to 600
Unitsseconds
Default 10
Introduced16.0.R1

Platforms

All

min-down-timer number
Synopsis Min downtime for BGP multi-homing site after transition
Contextconfigure redundancy bgp-mh site min-down-timer number
Treemin-down-timer

Description

This command configures the BGP multi-homing site minimum down time. When this value is set and the site goes operationally down, it remains operationally down for at least the length of time configured by this timer, regardless of whether other state changes might cause the site to go operationally up. This timer is restarted every time the site transitions from operationally up to down.

This timer is optimized in the following circumstances:

  • If the site goes down on the DF but there are no BGP multi-homing peers with the same site in an up state, this timer is not used.

  • If the site goes down on the DF but there are no active BGP multi-homing peers, this timer is not used.

  • If this timer is active and a BGP multihoming update is received from the DF indicating its site is down, this timer is immediately terminated and the BGP multihoming algorithm is triggered to determine whether this PE should become the DF.

Range1 to 100
Unitsseconds
Introduced 16.0.R1

Platforms

All

cert-sync boolean

Synopsis Automatically synchronize certificate files
Contextconfigure redundancy cert-sync boolean
Treecert-sync
Defaulttrue
Introduced16.0.R1

Platforms

All

mgmt-ethernet

Synopsis Enable the mgmt-ethernet context
Contextconfigure redundancy mgmt-ethernet
Treemgmt-ethernet

Description

Commands in this context configure the active CPM to use the management Ethernet port of the standby CPM if the management Ethernet port on the active CPM goes down.

Introduced16.0.R1

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s, 7950 XRS

revert number
Synopsis Time before reverting the management CPM Ethernet port
Contextconfigure redundancy mgmt-ethernet revert number
Treerevert

Description

This command allows the administrator to control when to revert to the management Ethernet port of the primary CPM after it comes up again.

Range1 to 300
Unitsseconds
Default 5
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s, 7950 XRS

multi-chassis

Synopsis Enter the multi-chassis context
Contextconfigure redundancy multi-chassis
Treemulti-chassis

Description

Commands in this context configure the attributes of multi-chassis redundancy.

Introduced16.0.R1

Platforms

All

ipsec-domain [id] number
Synopsis Enter the ipsec-domain list instance
Contextconfigure redundancy multi-chassis ipsec-domain number
Treeipsec-domain

Description

Commands in this context configure an IPsec domain used for N:M IPsec redundancy.

Max. Instances64
Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[id] number
Synopsis IPsec domain ID
Context configure redundancy multi-chassis ipsec-domain number
Treeipsec-domain
Range1 to 255

Notes

This element is part of a list key.

Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

designated-role keyword
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisDesignated role for the IPsec domain
Contextconfigure redundancy multi-chassis ipsec-domain number designated-role keyword
Treedesignated-role

Description

This command configures the designated role of the tunnel group in the IPsec domain.

Optionsstandby, active
Default standby
Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

priority number
Synopsis Priority for the IPsec domain
Context configure redundancy multi-chassis ipsec-domain number priority number
Treepriority

Description

This command configures the priority for the tunnel group in the IPsec domain. The node with the higher priority is more likely to be elected as active within the domain.

Range0 to 255
Default100
Introduced 22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

revertive boolean
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisEnable revertive behavior for the tunnel group
Contextconfigure redundancy multi-chassis ipsec-domain number revertive boolean
Treerevertive

Description

When configured to true, the router enables the revertive behavior of the tunnel group, which allows a router in an N:M domain to automatically take over as the active router in the domain when it becomes eligible to do so.

When configured to false, the revertive behavior of the tunnel group is disabled.

Defaultfalse
Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

tunnel-group reference
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisTunnel group ID for an IPsec domain
Contextconfigure redundancy multi-chassis ipsec-domain number tunnel-group reference
Treetunnel-group

Description

This command specifies the tunnel group ID for the IPsec domain.

Reference

configure isa tunnel-group number

Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

options
Synopsis Enter the options context
Context configure redundancy multi-chassis options
Treeoptions
Introduced21.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

sub-mgmt
Synopsis Enter the sub-mgmt context
Context configure redundancy multi-chassis options sub-mgmt
Treesub-mgmt

Description

Commands in this context configure subscriber management options for multi-chassis redundancy.

Introduced21.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dhcp-leasetime-threshold number
Synopsis DHCP lease threshold to skip MCS synchronization
Contextconfigure redundancy multi-chassis options sub-mgmt dhcp-leasetime-threshold number
Treedhcp-leasetime-threshold

Description

This command configures the DHCP lease time threshold to skip MCS synchronization.DHCP leases for the sub-mgmt MCS applications are eligible to skip synchronization if the committed lease time is less than the active threshold on a multi-chassis peer. The active threshold is the minimum value of the thresholds configured on the nodes at each end of a multi-chassis peer. The threshold is inactive when it is unconfigured on at least one end of the multi-chassis peer.

Range0 to 86400
Unitsseconds
Introduced 21.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

peer [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis Enter the peer list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone)
Treepeer

Description

This command configures the IP address of the peer in a redundant multi-chassis setup, and enters the context for further application-specific configuration options.

Max. Instances20
Introduced16.0.R1

Platforms

All

[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis Peer IP address
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone)
Treepeer

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

admin-state keyword
Synopsis Administrative state of the MC redundancy peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) admin-state keyword
Treeadmin-state
Optionsenable, disable
Default disable
Introduced16.0.R1

Platforms

All

authentication-key string
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisAuthentication key used between the node and MC peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) authentication-key string
Treeauthentication-key
String Length1 to 54
Introduced16.0.R1

Platforms

All

mc-endpoint
Synopsis Enable the mc-endpoint context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint
Treemc-endpoint
Introduced22.10.R1

Platforms

All

bfd boolean
Synopsis Enable BFD detection for the MC-EP peering tunnel
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint bfd boolean
Treebfd

Description

When configured to true, the system uses Bidirectional Forwarding Detection (BFD) to control the state of the associated protocol interface, where the state of the protocol interface is tied to the state of the BFD session between the local and remote nodes. 

The BFD settings are configured in the IP interface contexts.

Defaultfalse
Introduced22.10.R1

Platforms

All

boot-timer number
Synopsis Time to attempt connection before declaring failure
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint boot-timer number
Treeboot-timer

Description

This command configures the time interval to attempt connection that applies after the node reboots. This command specifies the time the multi-chassis endpoint (MC-EP) protocol takes to establish a connection before declaring a connection failure with the remote peer. When the time interval expires, all configured MC-EPs revert to single chassis behavior, activating the best local pseudowire.

Range1 to 600
Unitsseconds
Default 300
Introduced22.10.R1

Platforms

All

hold-on-neighbor-failure number
Synopsis Number of keepalive intervals to wait for packets
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint hold-on-neighbor-failure number
Treehold-on-neighbor-failure

Description

This command configures the number of keepalive intervals that the local node waits for packets from the MC-EP peer before declaring a connection failure. When the number of intervals is reached, all configured MC-EPs revert to single chassis behavior, activating the best local pseudowire.

Range2 to 25
Default3
Introduced 22.10.R1

Platforms

All

keep-alive-interval number
Synopsis Interval for exchange of keepalive messages
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint keep-alive-interval number
Treekeep-alive-interval

Description

This command configures the interval for which keepalive messages are exchanged between two systems participating as MC-EP when BFD is not active. The fast keepalive messages are used to detect remote node failure.

Range5 to 500
Default10
Introduced 22.10.R1

Platforms

All

passive-mode boolean
Synopsis Enable passive mode for the MC-EP tunnel
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint passive-mode boolean
Treepassive-mode

Description

When configured to true, the system enables passive mode behavior for the MC-EP protocol. Assuming the remote pair is configured with regular MC-EP in passive mode, the MC-EP pair remains dormant until two of the pseudowires in an MC-EP are activated by the remote PEs.

When one pseudowire is active, the dormant MC-EP pair becomes active. The regular mechanism to select the best pseudowire between the active pair is initiated, and the system blocks the Rx and Tx directions of the other pseudowire.

Defaultfalse
Introduced22.10.R1

Platforms

All

system-priority number
Synopsis System priority of the MC-EP
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-endpoint system-priority number
Treesystem-priority

Description

This command configures the system priority of the MC-EP. The peer configured with the lower value is selected as the master. If the system priority values are equal, the peer with the higher system ID (chassis MAC address) becomes the master.

Range0 to 255
Default0
Introduced 22.10.R1

Platforms

All

mc-ipsec
Synopsis Enable the mc-ipsec context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec
Treemc-ipsec

Description

This command enables the context to configure multi-chassis peer parameters.

Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

discovery-interval
Synopsis Enter the discovery-interval context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec discovery-interval
Treediscovery-interval
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

boot number
Synopsis Maximum interval after system bootup
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec discovery-interval boot number
Treeboot
Range1 to 1800
Unitsseconds
Default 300
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

domain [id] reference
Synopsis Enter the domain list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec domain reference
Treedomain
Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

admin-state keyword
Synopsis Administrative state of the IPsec domain
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec domain reference admin-state keyword
Treeadmin-state
Optionsenable, disable
Default disable
Introduced22.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

tunnel-group [tunnel-group-id] reference
Synopsis Enter the tunnel-group list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec tunnel-group reference
Treetunnel-group
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

admin-state keyword
Synopsis Administrative state of the peer IPsec tunnel group
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec tunnel-group reference admin-state keyword
Treeadmin-state
Optionsenable, disable
Default disable
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

peer-group number
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisPeer tunnel group
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ipsec tunnel-group reference peer-group number
Treepeer-group
Range1 to 64
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

mc-lag
Synopsis Enter the mc-lag context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag
Treemc-lag
Introduced16.0.R1

Platforms

All

lag [lag-name] reference
Synopsis Enter the lag list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag lag reference
Treelag
Introduced16.0.R1

Platforms

All

[lag-name] reference
Synopsis LAG name
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag lag reference
Treelag

Reference

configure lag string

Notes

This element is part of a list key.

Introduced21.2.R1

Platforms

All

lacp-key number
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisKey based on the remote MC-LAG
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag lag reference lacp-key number
Treelacp-key
Range1 to 65535
Introduced16.0.R1

Platforms

All

system-id string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisID based on the remote MC-LAG
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag lag reference system-id string
Treesystem-id
Introduced16.0.R1

Platforms

All

system-priority number
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisPriority based on the remote MC-LAG
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-lag lag reference system-priority number
Treesystem-priority
Range1 to 65535
Introduced16.0.R1

Platforms

All

mc-ring
Synopsis Enter the mc-ring context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring
Treemc-ring
Introduced16.0.R1

Platforms

All

ring [sync-tag] string
Synopsis Enter the ring list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string
Treering
Introduced16.0.R1

Platforms

All

[sync-tag] string
Synopsis Tag for synchronizing with the multi-chassis peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string
Treering
String Length1 to 32

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

in-band-control-path
Synopsis Enter the in-band-control-path context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string in-band-control-path
Treein-band-control-path
Introduced16.0.R1

Platforms

All

path-b
Synopsis Enter the path-b context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string path-b
Treepath-b
Introduced16.0.R1

Platforms

All

range start number end number
Synopsis Add a list entry for range
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string path-b range start number end number
Treerange
Introduced16.0.R1

Platforms

All

path-excl
Synopsis Enter the path-excl context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string path-excl
Treepath-excl
Introduced16.0.R1

Platforms

All

range start number end number
Synopsis Add a list entry for range
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string path-excl range start number end number
Treerange
Introduced16.0.R1

Platforms

All

ring-node [name] string
Synopsis Enter the ring-node list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string ring-node string
Treering-node
Introduced16.0.R1

Platforms

All

[name] string
Synopsis Name of the multi-chassis ring access node
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string ring-node string
Treering-node
String Length1 to 32

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

src-mac (keyword | ring-node-mac-address)
Synopsis Source MAC address for the access node connection
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string ring-node string src-mac (keyword | ring-node-mac-address)
Treesrc-mac
Optionssystem-mac-address
Defaultsystem-mac-address
Introduced16.0.R1

Platforms

All

srrp-instance [id] number
Synopsis Add a list entry for srrp-instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string srrp-instance number
Treesrrp-instance
Max. Instances2
Introduced16.0.R1

Platforms

All

type keyword
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisType of the multi-chassis ring
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) mc-ring ring string type keyword
Treetype
Optionslayer-2, layer-3

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All

peer-name string
Synopsis Multi-chassis peer name
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) peer-name string
Treepeer-name
String Length1 to 32
Introduced16.0.R1

Platforms

All

source-address (ipv4-address-no-zone | ipv6-address-no-zone)
WARNING:

Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect.

SynopsisSource address to communicate with the MC peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) source-address (ipv4-address-no-zone | ipv6-address-no-zone)
Treesource-address
Introduced16.0.R1

Platforms

All

sync
Synopsis Enable the sync context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync
Treesync
Introduced16.0.R1

Platforms

All

admin-state keyword
Synopsis Administrative state of the peer synchronization
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync admin-state keyword
Treeadmin-state
Optionsenable, disable
Default disable
Introduced16.0.R1

Platforms

All

diameter-node
Synopsis Enable the diameter-node context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync diameter-node
Treediameter-node
Introduced19.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

node [host-name] reference
Synopsis Enter the node list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync diameter-node node reference
Treenode
Introduced19.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

[host-name] reference
Synopsis Origin-Host of the node
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync diameter-node node reference
Treenode

Reference

configure aaa diameter node string

Notes

This element is part of a list key.

Introduced19.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

sync-tag string
Synopsis Sync tag to be used for synchronization
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync diameter-node node reference sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced19.10.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

igmp boolean
Synopsis Synchronize IGMP protocol information with the MC peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync igmp boolean
Treeigmp
Defaultfalse
Introduced16.0.R1

Platforms

All

ipsec boolean
Synopsis Synchronize IPsec information
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync ipsec boolean
Treeipsec
Defaultfalse
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

l2tp boolean
Synopsis Synchronize Layer Two Tunnel Protocol (L2TP)
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync l2tp boolean
Treel2tp
Defaultfalse
Introduced16.0.R1

Platforms

All

mld boolean
Synopsis Synchronize MLD protocol information
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync mld boolean
Treemld
Defaultfalse
Introduced16.0.R1

Platforms

All

nat
Synopsis Enable the nat context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync nat
Treenat
Introduced20.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

nat-group [id] reference
Synopsis Enter the nat-group list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync nat nat-group reference
Treenat-group

Description

Commands in this context configure multi-chassis synchronization (MCS) for a NAT group. NAT group health information is exchanged between the pair of redundant NAT nodes. The system elects one of the nodes as the active node for the NAT group and the other node becomes the standby node.

Introduced20.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[id] reference
Synopsis NAT group ID
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync nat nat-group reference
Treenat-group

Reference

configure isa nat-group number

Notes

This element is part of a list key.

Introduced20.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisNAT group synchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync nat nat-group reference sync-tag string
Treesync-tag

Description

This command configures the synchronization tag for the NAT group. The tag must match the synchronization tag for the NAT group on the peering node.

String Length1 to 32

Notes

This element is mandatory.

Introduced20.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

pim-snooping
Synopsis Enter the pim-snooping context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync pim-snooping
Treepim-snooping
Introduced16.0.R1

Platforms

All

saps boolean
Synopsis Synchronize PIM snooping data with the multi-chassis peer on SDP endpoints
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync pim-snooping saps boolean
Treesaps
Defaultfalse
Introduced16.0.R1

Platforms

All

srrp boolean
Synopsis Synchronize SRRP information
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync srrp boolean
Treesrrp
Defaultfalse
Introduced16.0.R1

Platforms

All

sub-host-trk boolean
Synopsis Synchronize subscriber host tracking information
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync sub-host-trk boolean
Treesub-host-trk
Defaultfalse
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

sub-mgmt
Synopsis Enter the sub-mgmt context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync sub-mgmt
Treesub-mgmt
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

ipoe boolean
Synopsis Synchronize subscriber management IPoE information
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync sub-mgmt ipoe boolean
Treeipoe
Defaultfalse
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

pppoe boolean
Synopsis Synchronize subscriber management PPPoE information
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync sub-mgmt pppoe boolean
Treepppoe
Defaultfalse
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

wlan-gw boolean
Synopsis Synchronize state between BNGs for ESM over soft-GRE
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync sub-mgmt wlan-gw boolean
Treewlan-gw

Description

When configured to true, this command enables the synchronization of ESM state and tunnel state to an MCS peer for ESM over soft-GRE tunnels.

Defaultfalse
Introduced23.10.R1

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

tags
Synopsis Enter the tags context
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags
Treetags
Introduced16.0.R1

Platforms

All

lag [lag-name] reference
Synopsis Enter the lag list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference
Treelag
Introduced16.0.R1

Platforms

All

[lag-name] reference
Synopsis LAG name
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference
Treelag

Reference

configure lag string

Notes

This element is part of a list key.

Introduced21.2.R1

Platforms

All

range start string end string
Synopsis Enter the range list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference range start string end string
Treerange
Introduced16.0.R1

Platforms

All

start string
Synopsis First encapsulation value
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference range start string end string
Treerange
String Length1 to 11

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

end string
Synopsis Last encapsulation value
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference range start string end string
Treerange
String Length1 to 11

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference range start string end string sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags lag reference sync-tag string
Treesync-tag
String Length1 to 32
Introduced16.0.R1

Platforms

All

port [id] reference
Synopsis Enter the port list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference
Treeport
Introduced16.0.R1

Platforms

All

[id] reference
Synopsis ID of port to be synchronized with multi-chassis peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference
Treeport

Reference

configure port string

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

range start string end string
Synopsis Enter the range list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference range start string end string
Treerange
Introduced16.0.R1

Platforms

All

start string
Synopsis First encapsulation value
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference range start string end string
Treerange
String Length1 to 11

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

end string
Synopsis Last encapsulation value
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference range start string end string
Treerange
String Length1 to 11

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference range start string end string sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags port reference sync-tag string
Treesync-tag
String Length1 to 32
Introduced16.0.R1

Platforms

All

pw-port [id] reference
Synopsis Enter the pw-port list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference
Treepw-port
Introduced16.0.R4

Platforms

All

[id] reference
Synopsis ID of pseudowire port to be synchronized with MC peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference
Treepw-port

Reference

configure pw-port number

Notes

This element is part of a list key.

Introduced16.0.R4

Platforms

All

range start string end string
Synopsis Enter the range list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference range start string end string
Treerange
Introduced16.0.R4

Platforms

All

start string
Synopsis First encapsulation value
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference range start string end string
Treerange
String Length1 to 11

Notes

This element is part of a list key.

Introduced16.0.R4

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference range start string end string sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced16.0.R4

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags pw-port reference sync-tag string
Treesync-tag
String Length1 to 32
Introduced16.0.R4

Platforms

All

sdp [id] number
Synopsis Enter the sdp list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number
Treesdp
Introduced16.0.R1

Platforms

All

[id] number
Synopsis ID of SDP to be synchronized with multi-chassis peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number
Treesdp
Range1 to 32767

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

range start number end number
Synopsis Enter the range list instance
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number range start number end number
Treerange
Introduced16.0.R1

Platforms

All

start number
Synopsis First virtual circuit ID
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number range start number end number
Treerange
Range1 to 4294967295

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

end number
Synopsis Last virtual circuit ID
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number range start number end number
Treerange
Range1 to 4294967295

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number range start number end number sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All

sync-tag string
WARNING:

Modifying this element recreates the parent element automatically for the new value to take effect.

SynopsisSynchronization tag
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tags sdp number sync-tag string
Treesync-tag
String Length1 to 32
Introduced16.0.R1

Platforms

All

track-srrp [id] number
Synopsis Enter the track-srrp list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync track-srrp number
Treetrack-srrp
Introduced16.0.R1

Platforms

All

[id] number
Synopsis Tracked SRRP instance ID
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync track-srrp number
Treetrack-srrp
Range1 to 4294967295

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

l2tp-tunnel-id-range
Synopsis Enter the l2tp-tunnel-id-range context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync track-srrp number l2tp-tunnel-id-range
Treel2tp-tunnel-id-range
Introduced16.0.R1

Platforms

All

transport-encryption
Synopsis Enter the transport-encryption context
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync transport-encryption
Treetransport-encryption
Introduced21.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

application [application-id] keyword
Synopsis Enter the application list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync transport-encryption application keyword
Treeapplication

Description

Commands in this context configure the MCS application for transport encryption. The application-id configures an application and a keychain defines the key used for the encryption.

Introduced21.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[application-id] keyword
Synopsis Application using transport encryption
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync transport-encryption application keyword
Treeapplication

Description

This command configures an MCS application for the transport encryption method.

Optionsigmp, igmp-snooping, sub-mgmt-ipoe, srrp, mc-ring, mld-snooping, dhcp-server, sub-host-trk, sub-mgmt-pppoe, ipsec, mld, python, l2tp, diam-proxy, pim-snpg-sap, pim-snpg-sdp, diam-node, nat, sub-mgmt-wlan-gw

Notes

This element is part of a list key.

Introduced21.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

keychain reference
Synopsis Keychain containing the authentication keys
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync transport-encryption application keyword keychain reference
Treekeychain

Description

This command specifies a keychain that contains authentication keys for the application.

Reference

configure system security keychains keychain string

Notes

This element is mandatory.

Introduced21.7.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

tunnel-group [tunnel-group-id] number
Synopsis Enter the tunnel-group list instance
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tunnel-group number
Treetunnel-group
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

[tunnel-group-id] number
Synopsis Multi-active tunnel group ID
Context configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tunnel-group number
Treetunnel-group
Range1 to 64

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

sync-tag string
Synopsis Tag to synchronize the tunnel group with the MC peer
Contextconfigure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync tunnel-group number sync-tag string
Treesync-tag
String Length1 to 32

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

rollback-sync keyword

Synopsis Parameters for redundancy rollback synchronization
Contextconfigure redundancy rollback-sync keyword
Treerollback-sync
Optionsrollback-single, rollback-all
Introduced 16.0.R1

Platforms

All

srrp

Synopsis Enter the srrp context
Context configure redundancy srrp
Treesrrp

Description

Commands in this context configure system attributes for SRRP.

Introduced22.2.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

auto-srrp-id-range
Synopsis Enable the auto-srrp-id-range context
Contextconfigure redundancy srrp auto-srrp-id-range
Treeauto-srrp-id-range

Description

Commands in this context reserve IDs for internal SRRP objects created for inter-BNG-UP resiliency. Manually provisioned SRRP instances cannot use these reserved IDs.

Introduced22.2.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

end number
Synopsis Upper bound of the ID range
Context configure redundancy srrp auto-srrp-id-range end number
Treeend
Range2 to 4294967295
Default4294967295
Introduced22.2.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

start number
Synopsis Lower bound of the ID range
Context configure redundancy srrp auto-srrp-id-range start number
Treestart
Range1 to 4294967294
Default2147483648
Introduced22.2.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

switchover-exec string

Synopsis CLI script file executed after a redundancy switchover
Contextconfigure redundancy switchover-exec string
Treeswitchover-exec

Description

This command specifies the location and name of the CLI script file executed following a redundancy switchover from the previously active CPM card. A switchover can happen because of a fatal failure or by manual action.

The CLI script file can contain commands for environment settings, classic CLI debug configuration (excluding mirroring settings), and other commands not maintained by the configuration redundancy.

The following commands are not supported in the switchover-exec file: clear, configure, candidate, oam, tools, oam, ping, traceroute, mstat, mtrace, and mrinfo.

String Length1 to 100
Introduced16.0.R1

Platforms

All

synchronize keyword

Synopsis Parameters for redundancy synchronization
Contextconfigure redundancy synchronize keyword
Treesynchronize
Optionsoff, config, boot-env
Introduced16.0.R1

Platforms

All