v Commands

vas-filter

Syntax

vas-filter name [entry [ entry]]

vas-filter

Context

[Tree] (show>subscr-mgmt>isa-svc-chain vas-filter)

Full Context

show subscriber-mgmt isa-service-chaining vas-filter

Description

This command displays VAS filter information.

Parameters

name: Displays information about the specified name of the VAS filter.

entry

Displays information about the specified VAS filter entry

Values: 0 to 4294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of VAS filter information.

Output Example

show subscriber-mgmt isa-service-chaining vas-filter "foo"
====================================================================
ISA Service Chaining - VAS Filter "vas-filter"
====================================================================
Description            : (Not Specified)
-------------------------------------------------------------------------------
Entry                       : 1
Admin State            : in-service
Description            : (Not Specified)
Match
    Protocol             :   udp
    Foreign IP          :  12.1.1.1/24
    Foreign Port       :  2000
Action upstream
    Fail Action        : forward
    Forwarding
        Forward IP     : 40.1.0.1
        Service           : 11
        ESI                 : N/A
     Network Service Header
        Service Path   : 32          
        Service Index  : 2
        Insert Sub-Id  : disabled
        Meta Data      : 0xaabbccdd
      Action downstream
          Fail Action        : forward
          Forwarding
              Forward IP     : 30.1.0.1
             Service           : 11
              ESI                 : N/A
         Network Service Header
             Service Path   : 32          
             Service Index  : 2
             Insert Sub-Id  : disabled
             Meta Data      : 0xaabbccdd

Table 1. Service Chaining VAS Filter Field Descriptions
Label	Description
Description	The text string describing the VAS filter
Entry	The ID of the entry in the VAS filter
Admin State	The administrative state of the entry in the VAS filter
Match	Protocol — The IP protocol to match in this entry of the VAS filter Foreign IP — The foreign IP address to match in this entry of the VAS filter Foreign Port — The foreign port to match in this entry of the VAS filter
Action	upstream — Indicates the upstream direction for the action in the VAS filter entry downstream — Indicates the downstream direction for the action in the VAS filter entry
Fail Action	Forwarding IP — The forwarding Service Function IP address for the action in a VAS filter entry Service — The forwarding service for the action in a VAS filter entry ESA — The ESI for the action in a VAS filter entry
Network Service Header	Service Path — The path ID used to construct an NSH (Network Service Header) for the action in a VAS filter entry
	Service Index — The service ID used to construct an NSH for the action in a VAS filter entry
	Insert Sub-ID disabled — The subscriber ID is not inserted with meta data to construct an NSH for the action in a VAS filter entry enabled — The subscriber ID is inserted with meta data to construct an NSH for the action in a VAS filter entry
	Meta Data — The opaque metadata used to construct an NSH (Network Service Header) for the action in a VAS filter entry

vas-tunnel

Syntax

vas-tunnel [connection-id]

Context

[Tree] (show>router>l2tp vas-tunnel)

Full Context

show router l2tp vas-tunnel

Description

This command displays L2TP VAS tunnel operational information.

Parameters

connection-id

Specifies the identification number for an L2TP VAS tunnel connection.

Values: 14294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of L2TP VAS tunnel information.

Output Example

*A:Dut-C# show subscriber-mgmt steering-profile "steeringprof01"
===============================================================================
Steering Profile "steeringprof01"
===============================================================================
Operational State    : in-service
Reference Count      : 1
Description          : LAC Traffic Steering Profile 01
Access Router        : access_router
Network Nexthop      : 10.10.20.2
Network Router       : network_router
===============================================================================
*A:Dut-C#

*A:Dut-C# show router service-name "access_router" l2tp vas-tunnel 
=================================================================
L2TP VAS Tunnel Summary (222)
=================================================================
Conn ID    Loc-Tu-ID  Rem-Tu-ID  Base-vRtrID
-----------------------------------------------------------------
598212608  9128       1          Base
-----------------------------------------------------------------
No. of VAS Tunnels: 1
=================================================================
*A:Dut-C#

*A:Dut-C# show router service-name "access_router" l2tp vas-tunnel 598212608 
===============================================================================
L2TP Tunnel 598212608 (222)
===============================================================================
Transport Type                  : udpIp
Router ID                       : 222
Base Router ID                  : Base
Local Connection ID             : 598212608
Local Tunnel ID                 : 9128
Local IP Address                : 10.20.1.3
Local UDP Port                  : 1701
Remote Connection ID            : 65536
Remote Tunnel ID                : 1
Remote IP Address               : 10.10.40.2
Remote UDP Port                 : 7777
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sessions
-------------------------------------------------------------------------------
Loc Session Conn ID Loc Session ID      Rem Session Conn ID Rem Session ID
-------------------------------------------------------------------------------
598227315           14707               65537               1
-------------------------------------------------------------------------------
No. of Sessions: 1
-------------------------------------------------------------------------------
*A:Dut-C# 

*A:Dut-C# show service id "pppoe_service" pppoe session l2tp-connection-id 598227315 detail 
===============================================================================
PPPoE sessions for svc-id 111
===============================================================================
Sap Id              Mac Address       Sid    Up Time         Type
    IP/L2TP-Id/Interface-Id                                      MC-Stdby
-------------------------------------------------------------------------------
1/1/1               00:10:94:00:00:01 1      0d 00:45:26     lac
    598227315                                                            
PPP User-Name        : user01
Subscriber-interface : subif01
Group-interface      : grpif01
Subscriber           : "sub01"
Sub-Profile-String   : "subprof01"
SLA-Profile-String   : "slaprof01"
SPI group ID         : (Not Specified)
ANCP-String          : ""
Int-Dest-Id          : ""
App-Profile-String   : ""
Category-Map-Name    : ""
Acct-Session-Id      : "1412FF000000005E85A5C6"
Sap-Session-Index    : 1
L2TP Router Name     : Base
L2TP Group Name      : default_radius_group
L2TP Assignment ID   : unnamed
L2TP Steering Profile: steeringprof01
L2TP Steering State  : steered
Circuit-Id           : 
Remote-Id            : 
Radius Session-TO    : N/A
Radius Class         : 
Radius User-Name     : user01         
Logical-Line-Id      : 
Service-Name         : 
-------------------------------------------------------------------------------
Number of sessions   : 1
===============================================================================

vccv-bfd

Syntax

vccv-bfd [session]

Context

[Tree] (show>service>id vccv-bfd)

Full Context

show service id vccv-bfd

Description

This command shows whether VCCV BFD is configured for a particular service and information about the VCCV session state.

The show>service>id>vccv-bfd session command gives a summary of all the VCCV sessions. Using both the sdp-id and the vc-id parameters gives VCCV BFD session information about a specific spoke-SDP.

For services where auto-discovery and signaling are used (for example, BGP VPWS, VPLS, and BGP-AD VPLS), use the show>service>id>detail command to determine the sdp-id and vc-id parameters allocated by the system.

Parameters

session: Displays a summary of all VCCV sessions.

Platforms

All

Output

The following output is an example of VCCV BFD information.

Output Example

*A:Dut-C# show service id 1000 vccv-bfd session
===============================================================================
BFD Session
===============================================================================
Interface/Lsp Name              State               Tx Intvl  Rx Intvl  Multipl
Remote Address/Info         Protocols             Tx Pkts   Rx Pkts   Type
LAG port/sdp-id:vc-id      LAG ID/SvcId
-------------------------------------------------------------------------------
N/A                           Up (3)                1000      1000      3
N/A                           vccv                  152       151       central
100:100                       1000
-------------------------------------------------------------------------------
No. of BFD sessions: 1
===============================================================================

vccv-bfd

Syntax

vccv-bfd [session]

Context

[Tree] (show>service vccv-bfd)

Full Context

show service vccv-bfd

Description

This command displays the VCCV BFD session for the system.

Platforms

All

version

Syntax

version

Context

[Tree] (show>app-assure version)

Full Context

show application-assurance version

Description

This command displays the versions of the isa-aa.tim used by the CPM and the AA ISAs.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of version information.

Output Example

A:ALU>show>app-assure# version 
===============================================================================
Versions of isa-aa.tim in use
===============================================================================
CPM           : TiMOS-M-7.0.R4
1/1           : TiMOS-I-7.0.R1
2/1           : TiMOS-I-7.0.R1
3/2           : TiMOS-I-7.0.R1
===============================================================================
A:ALU>show>app-assure#

version

Syntax

version group-interface [fwd-service service-id] ip-in-name

version group-interface all

version host ip-address

version host all

version [interface ip-int-name | ip-address]

Context

[Tree] (clear>router>igmp version)

Full Context

clear router igmp version

Description

This command clears the IGMP version on a specified interface or IP address.

Parameters

group-interface interface-name: Clears the IGMP version on the specified group interface.

group-interface all: Clears the IGMP version on all group interfaces.

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

host ip-address: Clears the IGMP version on the specified host.

host all: Clears the IGMP version on all hosts.

interface ip-int-name: Clears the IGMP version on the specified interface.

interface ip-address: Clears the IGMP version on the specified IP address.

Platforms

All

version

Syntax

version group-interface [fwd-service service-id] ip-int-name

version group-interface all

version host ipv6-address

version host all

version [ip-int-name | ipv6-address]

Context

[Tree] (clear>router>mld version)

Full Context

clear router mld version

Description

This command clears MLD version parameters.

Parameters

group-interface interface-name: Clears the MLD version on the specified group interface.

group-interface all: Clears the MLD version on all group interfaces.

service-id

Clears the MLD version information for the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

host ipv6-address: Clears the MLD version on the specified host.

host all: Clears the MLD version on all hosts.

ip-int-name: Clears version information for the specified MLD interface name.

ipv6-address: Clears version information for the specified MLD IPv6 address.

Parameters

video-group-id: Specifies the ISA video group ID.

peak-last-hour: Displays the peak FCC/RET session and bandwidth for the current hour, the last hour, and the lifetime.

Platforms

7450 ESS, 7750 SR, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s

Output

The following are output examples for this command.

Output Example

A:SR-7/Dut-C# show isa video-group
===============================================================================
ISA Video Group
===============================================================================
Video Group Id         : 1              Admin State            :  Up
Oper State             : Up             RT Server State        :  Enabled
FCC Server State       : Disabled       ADI State              :  Disabled
RT Resv Bandwidth(Mbps): 0              ADI State              :  Disabled
 
MDA                    : 2/1            Channels               :  2
Admin State            : Up             Oper State             :  Up
Used Cache (bytes)     : 586622         Available Cache (bytes): 1869186816
Mem alloc failures     : 0              Dropped pkts (denting) : 0
Failed Chnl Allocs     : 0              Egress Bandwidth excee*:  0
Bandwidth in use(kbps) : 0              Peak Bandwidth(kbps)   : 200
Egress stream resets   : 0              Ingress stream resets  : 53
Ad stream resets       : 0              Ad stream aborts       :  0
SSRC collisions        : 0              Received data packets  : 4521
Received data octets   : 6284714        Rx data packet errors  : 0
Transmitted data packts: 1183           Transmitted data octets:  1646212
Tx data packet errors  : 0              Tx lost data packets   : 47
Active RTCP sessions   : 1              Requested RTP Packets  : 968
RTCP Parse Errors      : 0              RTCP Config Errors     : 0
RTCP IPC Errors        : 0              RTCP SG Errors         :  0
RTCP Subscriber Errors : 0              RTCP Interface Errors  : 0
Total RET BW (Kbps)    : 0              Max. RET BW (Kbps)     : 100
Total FCC BW (Kbps)    : 0              Drop Count for FCC     : 0
Mcast RET Req for RTCP : 0              Mcast RET Req for RUDP : 0
Mcast RET Created      : 0              Mcast RET Req Quenched : 0
HighPkt pool limit hit : 0
Pkts Lost (2-10)       : 24             Pkts Lost (11-20)      : 48
Pkts Lost (21-30)      : 0              Pkts Lost (31-40)      : 0
Pkts Lost ( >40)       : 0
-------------------------------------------------------------------------------
Video-groups : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:SR-7/Dut-C#

*A:Dut-C# show isa video-group 1 peak-last-hour 
===============================================================================
ISA Video Group 
=============================================================================== 
Video Group Id         : 1              Admin State            : Up 
Oper State             : Up             RT Server State        : Disabled 
FCC Server State       : Enabled        ADI State              : Disabled 
Analyzer State         : Disabled       Str Sel State          : Disabled 
RT Resv Bandwidth(Mbps): 0              RT Client              : Enabled 
------------------------------------------------------------------------------- 
ESA-VM                 : 7/1            Channels               : 1 
Admin State            : Up             Oper State             : Up 
Used Cache (bytes)     : 4465664        Available Cache (bytes): 2858537472 
Mem alloc failures     : 0              Dropped pkts (denting) : 0 
Failed Chnl Allocs     : 0              Egress Bandwidth excee*: 0 
Bandwidth in use(kbps) : 0              Peak Bandwidth(kbps)   : 8658 
Egress stream resets   : 0              Ingress stream resets  : 153 
Ad stream resets       : 0              Ad stream aborts       : 0 
SSRC collisions        : 0              Received data packets  : 130779 
Received data octets   : 181782810      Rx data packet errors  : 0 
Transmitted data packts: 10711          Transmitted data octets: 14888290 
Tx data packet errors  : 0              Tx lost data packets   : 0 
Active RTCP sessions   : 1              Requested RTP Packets  : 0 
RTCP Parse Errors      : 0              RTCP Config Errors     : 0 
RTCP IPC Errors        : 0              RTCP SG Errors         : 0 
RTCP Subscriber Errors : 0              RTCP Interface Errors  : 0 
Total RET BW (Kbps)    : 0              Max. RET BW (Kbps)     : 0 
Total FCC BW (Kbps)    : 0              Drop Count for FCC     : 0 
Mcast RET Req for RTCP : 0              Mcast RET Req for RUDP : 0 
Mcast RET Created      : 0              Mcast RET Req Quenched : 0 
HighPkt pool limit hit : 0 
Pkts Lost (1-10)       : 0              Pkts Lost (11-20)      : 0 
Pkts Lost (21-30)      : 0              Pkts Lost (31-40)      : 0 
Pkts Lost ( >40)       : 0 
------------------------------------------------------------------------------- 
ESA-VM 7/1 Summary current hour (12:53:06 to 13:14:50)
                         BW (Kbps)                Time 
Peak FCC                 8658                     Mon Jun  7 13:14:10 UTC 2021 
Peak RET                 0                        Never 
Peak Total               8658                     Mon Jun  7 13:14:10 UTC 2021
                         Sessions                 Time 
Peak FCC                 1                        Mon Jun  7 13:14:10 UTC 2021 
Peak RET                 0                        Never 
Peak Total               1                        Mon Jun  7 13:14:10 UTC 2021 
------------------------------------------------------------------------------- 
ESA-VM 7/1 Summary last hour (11:53:06 to 12:53:06)
                         BW (Kbps)                Time 
Peak FCC                 8436                     Mon Jun  7 12:25:08 UTC 2021 
Peak RET                 0                        Never 
Peak Total               8436                     Mon Jun  7 12:25:08 UTC 2021 
                         Sessions                 Time 
Peak FCC                 1                        Mon Jun  7 12:25:08 UTC 2021 
Peak RET                 0                        Never 
Peak Total               1                        Mon Jun  7 12:25:08 UTC 2021 
------------------------------------------------------------------------------- 
ESA-VM 7/1 Summary lifetime 
                         BW (Kbps)                Time 
Peak FCC                 8658                     Mon Jun  7 13:14:10 UTC 2021 
Peak RET                 0                        Never 
Peak Total               8658                     Mon Jun  7 13:14:10 UTC 2021 
                         Sessions                 Time 
Peak FCC                 1                        Mon Jun  7 12:25:08 UTC 2021 
Peak RET                 0                        Never 
Peak Total               1                        Mon Jun  7 12:25:08 UTC 2021 
------------------------------------------------------------------------------- 
Video-groups : 1 
=============================================================================== 
* indicates that the corresponding row element may have been truncated.

view

Syntax

view [view-name] [detail]

Context

[Tree] (show>system>security view)

Full Context

show system security view

Description

This command lists one or all views and permissions in the MIB-OID tree.

Parameters

view-name: Specifies the name of the view to display output. If no view name is specified, the complete list of views displays.

detail: Displays detailed view information.

Platforms

All

Output

The following output is an example of system security views.

Show System Security View Output Fields describes system security view output fields.

Output Example

A:ALA-1# show system security view
===============================================================================
Views
===============================================================================
view name         oid tree                        mask              permission
-------------------------------------------------------------------------------
iso               1                                                 included
no-security       1                                                 included
no-security       1.3.6.1.6.3                                       excluded
no-security       1.3.6.1.6.3.10.2.1                                included
no-security       1.3.6.1.6.3.11.2.1                                included
no-security       1.3.6.1.6.3.15.1.1                                included
-------------------------------------------------------------------------------
No. of Views: 6
===============================================================================
A:ALA-1#

A:ALA-1# show system security view no-security detail
===============================================================================
Views
===============================================================================
view name         oid tree                        mask              permission
-------------------------------------------------------------------------------
no-security       1                                                 included
no-security       1.3.6.1.6.3                                       excluded
no-security       1.3.6.1.6.3.10.2.1                                included
no-security       1.3.6.1.6.3.11.2.1                                included
no-security       1.3.6.1.6.3.15.1.1                                included
-------------------------------------------------------------------------------
No. of Views: 5
===============================================================================
=======================================
no-security used in
=======================================
group name
---------------------------------------
snmp-ro
snmp-rw
=======================================
A:ALA-1#

Table 2. Show System Security View Output Fields
Label	Description
View name	Displays the name of the view. Views control the accessibility of a MIB object within the configured MIB view and subtree.
OID tree	Displays the Object Identifier (OID) value. OIDs uniquely identify MIB objects in the subtree.
Mask	Displays the mask value and the mask type, along with the oid-value configured in the view command, determines the access of each sub-identifier of an object identifier (MIB subtree) in the view.
Permission	Included — Specifies to include MIB subtree objects. Excluded — Specifies to exclude MIB subtree objects.
No. of Views	Displays the total number of configured views.
Group name	Displays the access group name.

violators

Syntax

violators [port] [interface] [sap] [ video] [sdp]

Context

[Tree] (show>system>security>cpu-protection violators)

Full Context

show system security cpu-protection violators

Description

This command displays all interfaces, ports or SAPs with CPU protection policy violators. It also includes objects (SAPs, interfaces) that exceed the out-profile-rate and have the log-events keyword enabled for the out-profile-rate in the cpu-protection policy associated with the object.

Parameters

port: Displays violators associated with the port.

interface: Displays violators associated with the interface.

sap: Displays violators associated with the SAP.

video: Displays violators associated with the video entity.

sdp: Displays violators associated with the SDP.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

Output

The following output is an example of CPU protection violators information.

Output Example

*A:SecuritySR7>config>sys>security>cpu-protection>policy# show system security
 cpu-protection violators
===============================================================================
Ports where a rate limit is violated
===============================================================================
Port-Id
  Type Limit First-Time          Last-Time           Violation-Periods
-------------------------------------------------------------------------------
No ports found
===============================================================================
Interfaces where the protection policy overall rate limit is violated
===============================================================================
Interface-Name                               Router-Name
  Plcy Limit First-Time          Last-Time           Violation-Periods
-------------------------------------------------------------------------------
toIxia                                       Base           
  255  1000  10/02/2012 18:38:23 10/02/2012 18:39:31 70         
-------------------------------------------------------------------------------
1 interface(s) found
===============================================================================
SAP's where the protection policy overall rate limit is violated
===============================================================================
SAP-Id                                       Service-Id
  Plcy Limit First-Time          Last-Time           Violation-Periods
-------------------------------------------------------------------------------
No SAP's found
===============================================================================

SDP's where the protection policy overall rate limit is violated
===============================================================================
SDP-Id           Service-Id
  Plcy Limit First-Time          Last-Time           Violation-Periods
-------------------------------------------------------------------------------
No SDP's found
===============================================================================
Video clients where the protection policy per-source rate limit is violated
===============================================================================
Client IP Address  Video-Interface                 Service-Id
  Plcy Limit First-Time          Last-Time           Violation-Periods
-------------------------------------------------------------------------------
No clients found
===============================================================================

violators

Syntax

violators [port] [interface] [sap]

Context

[Tree] (clear>cpu-protection violators)

Full Context

clear cpu-protection violators

Description

This command clears the rate limit violator record.

Parameters

port: Clears entries for ports.

interface: Clears entries for interfaces.

sap: Clears entries for SAPs.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

violators

Syntax

violators enforcement {sap | interface} card slot-number [fpfp-number]

violators local-monitor {sap | interface} card slot-number [fp fp-number]

Context

[Tree] (tools>dump>security>dist-cpu-protection violators)

Full Context

tools dump security dist-cpu-protection violators

Description

This command shows the nonconforming enforcement policers and local monitors.

Parameters

sap: -Indicates to display the violators associated with SAPs

interface: - Indicates to display the violators associated with router interfaces.

enforcement: Shows exceed and hold-down for Static and Dynamic Policers.

local-monitor: Shows state of dynamic policer allocation for Local Monitoring Policers.

card slot-number

The physical slot number for the card.

Values: 1 to n (n is platform dependent)

fp fp-number

Identifies the instance of the FP (FastPath) chipset. Some cards have a single FP and some cards can contain multiple FPs (for example, an XCM can house multiple FPs via its two XMAs).

Values: 1 to 8

Platforms

All

Output

Users Output

Output Parameters describes show users output fields.

Output Example

*A:Dut-A# tools dump security dist-cpu-protection violators enforcement interface
 card 4 fp 1 
===============================================================================
Distributed Cpu Protection Current Interface Enforcer Policer Violators
===============================================================================
Interface                       Policer/Protocol                    Hld Rem       
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Violators on Slot-4 Fp-1
-------------------------------------------------------------------------------
test                            staticArpPolicer                [S] none         
test                            icmp                            [D] none         
test                            ospf                            [D] none 
-------------------------------------------------------------------------------
[S]-Static [D]-Dynamic [M]-Monitor
-------------------------------------------------------------------------------
===============================================================================

Table 3. Output Parameters
Label	Description
Interface	The name of the router interface
Policer/Protocol	The configured name of the static policer (indicated with an [S]) or the DCP protocol name for a dynamic policer (indicated with a [D]).
[S] / [D]	indicates a static vs dynamic policer
Hld Rem	The remaining time in the hold-down countdown during which a policer is treating all packets as exceeding.

virtual

Syntax

virtual

Context

[Tree] (show>card virtual)

Full Context

show card virtual

Description

Commands in this context display virtual card information.

Platforms

VSR

virtual

Syntax

virtual

Context

[Tree] (clear>card virtual)

Full Context

clear card virtual

Description

Commands in this context clear virtual card statistics.

Platforms

VSR

virtual-link

Syntax

virtual-link [detail]

virtual-link database [detail]

Context

[Tree] (show>router>ospf virtual-link)

Full Context

show router ospf virtual-link

Description

This command displays information for OSPF virtual links.

Parameters

database: Displays the virtual link database.

detail: Displays operational and statistical information about virtual links associated with this router.

Platforms

All

Output

The following output is an example of OSPF virtual link information, and OSPF Virtual Link Output Fields describes the output fields.

Output Example

show router ospf virtual-link detail 
===============================================================================
Rtr Base OSPFv2 Instance 0 Virtual Links (detail)
===============================================================================
-------------------------------------------------------------------------------
Neighbor Router Id : 10.0.0.3
-------------------------------------------------------------------------------
Nbr Router Id  : 10.0.0.3               Area Id        : 0.0.0.1
Local Interface: 1.2.3.2
Metric         : 10                     
State          : Point To Point         Admin State    : Up
Hello Intrvl   : 10 sec                 Rtr Dead Intrvl: 60 sec
Tot Rx Packets : 10                     Tot Tx Packets : 10
Rx Hellos      : 1                      Tx Hellos      : 2
Rx DBDs        : 2                      Tx DBDs        : 3
Rx LSRs        : 1                      Tx LSRs        : 1
Rx LSUs        : 4                      Tx LSUs        : 3
Rx LS Acks     : 2                      Tx LS Acks     : 1
Discards       : 0                      Tx Failures    : 0
                                        Retransmits    : 0
Bad Networks   : 0                      Bad Versions   : 0
Bad Areas      : 0                      Bad Dest Addrs : 0
Bad Auth Types : 0                      Auth Failures  : 0
Bad Neighbors  : 0                      Bad Pkt Types  : 0
Bad Lengths    : 0                      Bad Hello Int. : 0
Bad Dead Int.  : 0                      Bad Options    : 0
Retrans Intrvl : 5 sec                  Transit Delay  : 1 sec
Last Event     : 08/12/2021 12:56:23    Authentication : None
IPsec In Sta SA:                        IPsec Out Sta *: 
IPsec In Sta S*:                        
LSA Count      : 0                      LSA Checksum   : 0x0
===============================================================================

Table 4. OSPF Virtual Link Output Fields
Label	Description
Nbr Rtr ID	The router ID(s) of neighboring routers.
Area Id	A 32-bit integer which identifies an area.
Local Interface	The IP address of the local egress interface used to maintain the adjacency to reach this virtual neighbor.
Metric	The metric value associated with the route. This value is used when importing this static route into other protocols. When the metric is configured as zero, the metric configured in OSPF, default-import-metric, applies. This value is also used to determine the static route installed in the forwarding table.
State	The operational state of the virtual link to the neighboring router.
Authentication	Specifies whether authentication is enabled for the interface or virtual link.
Hello Intrval	Specifies the length of time, in seconds, between the Hello packets that the router sends on the interface.
Rtr Dead Intrvl	Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was enabled.
Tot Rx Packets	Specifies the total number of OSPF packets received on this interface since the OSPF admin status was enabled.
Rx Hellos	Specifies the total number of OSPF Hello packets received on this interface since the OSPF admin status was enabled.
Rx DBDs	Specifies the total number of OSPF Database Description packets received on this interface since the OSPF administrative status was enabled.
Rx LSRs	Specifies the total number of Link State Requests (LSRs) received on this interface since the OSPF admin status was enabled.
Rx LSUs	Specifies the total number of Link State Updates (LSUs) received on this interface since the OSPF admin status was enabled.
Rx LS Acks	Specifies the total number of Link State Acknowledgments received on this interface since the OSPF admin status was enabled.
Tot Tx Packets	Specifies the total number of OSPF packets transmitted on this virtual interface since it was created.
Tx Hellos	Specifies the total number of OSPF Hello packets transmitted on this virtual interface since it was created.
Tx DBDs	Specifies the total number of OSPF database description packets transmitted on this virtual interface.
Tx LSRs	Specifies the total number of OSPF Link State Requests (LSRs) transmitted on this virtual interface.
Tx LSUs	Specifies the total number of OSPF Hello packets transmitted on this interface since the OSPF admin status was enabled.
Tx LS Acks	Specifies the total number of OSPF Link State Acknowledgments (LSA) transmitted on this virtual interface.
Retransmits	Specifies the total number of OSPF retransmits sent on this interface since the OSPF admin status was last enabled.
Discards	Specifies the total number of OSPF packets discarded on this interface since the OSPF admin status was last enabled.
Bad Networks	Specifies the total number of OSPF packets received with invalid network or mask since the OSPF admin status was last enabled.
Bad Versions	Specifies the total number of OSPF packets received with bad OSPF version numbers since the OSPF admin status was last enabled.
Bad Areas	Specifies the total number of OSPF packets received with an area mismatch since the OSPF admin status was last enabled.
Bad Dest Addrs	Specifies the total number of OSPF packets received with the incorrect IP destination address since the OSPF admin status was last enabled.
Bad Auth Types	Specifies the total number of OSPF packets received with an invalid authorization type since the OSPF admin status was last enabled.
Auth Failures	Specifies the total number of OSPF packets received with an invalid authorization key since the OSPF admin status was last enabled.
Bad Neighbors	Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled.
Bad Pkt Types	Specifies the total number of OSPF packets received with an invalid OSPF packet type since the OSPF admin status was last enabled.
Bad Lengths	Specifies the total number of OSPF packets received on this interface with a total length not equal to the length given in the packet itself since the OSPF admin status was last enabled.
Bad Hello Int.	Specifies the total number of OSPF packets received where the hello interval given in packet was not equal to that configured on this interface since the OSPF admin status was last enabled.
Bad Dead Int.	Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was last enabled.
Bad Options	Specifies the total number of OSPF packets received with an option that does not match those configured for this interface or area since the OSPF admin status was last enabled.
Retrans Intrvl	Specifies the length of time, in seconds, that OSPF waits before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor.
Transit Delay	Specifies the time, in seconds, it takes to transmit a link state advertisement (LSA) on the interface or virtual link.
Last Event	Specifies the date and time when an event was last associated with this OSPF interface.
Tx Failures	Transmitted OSPF packets that are dropped due to resource shortage.

virtual-link

Syntax

virtual-link [detail]

virtual-link [detail] database

Context

[Tree] (show>router>ospf3 virtual-link)

Full Context

show router ospf3 virtual-link

Description

This command displays information for OSPFv3 virtual links.

Parameters

database: Displays the virtual link database.

detail: Displays operational and statistical information about virtual links associated with this router.

Platforms

All

Output

The following output is an example of OSPFv3 virtual link information, and OSPF Virtual Link Output Fields describes the output fields.

Output Example

show router ospf3 virtual-link detail 
===============================================================================
Rtr Base OSPFv3 Instance 0 Virtual Links (detail)
===============================================================================
-------------------------------------------------------------------------------
Neighbor Router Id : 10.0.0.2
-------------------------------------------------------------------------------
Nbr Router Id  : 10.0.0.2               Area Id        : 0.0.0.1
Local Interface: 3ffe::101:201
Metric         : 10                     
State          : Point To Point         Admin State    : Up
Hello Intrvl   : 10 sec                 Rtr Dead Intrvl: 60 sec
Tot Rx Packets : 42                     Tot Tx Packets : 15
Rx Hellos      : 29                     Tx Hellos      : 3
Rx DBDs        : 2                      Tx DBDs        : 3
Rx LSRs        : 1                      Tx LSRs        : 1
Rx LSUs        : 7                      Tx LSUs        : 6
Rx LS Acks     : 3                      Tx LS Acks     : 2
Discards       : 0                      Tx Failures    : 0
                                        Retransmits    : 1
Bad Networks   : 0                      Bad Versions   : 0
Bad Areas      : 0                      Bad Dest Addrs : 0
Bad Auth Types : 0                      Auth Failures  : 0
Bad Neighbors  : 0                      Bad Pkt Types  : 0
Bad Lengths    : 0                      Bad Hello Int. : 0
Bad Dead Int.  : 0                      Bad Options    : 0
Retrans Intrvl : 5 sec                  Transit Delay  : 1 sec
Last Event     : 08/12/2021 12:58:28    Authentication : None
IPsec In Sta SA:                        IPsec Out Sta *: 
IPsec In Sta S*:                        
LSA Count      : 0                      LSA Checksum   : 0x0
===============================================================================

Table 5. OSPF Virtual Link Output Fields
Label	Description
Nbr Rtr ID	The router ID(s) of neighboring routers.
Area Id	A 32-bit integer which identifies an area.
Local Interface	The IP address of the local egress interface used to maintain the adjacency to reach this virtual neighbor.
Metric	The metric value associated with the route. This value is used when importing this static route into other protocols. When the metric is configured as zero, the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table.
State	The operational state of the virtual link to the neighboring router.
Authentication	Specifies whether authentication is enabled for the interface or virtual link.
Hello Intrval	Specifies the length of time, in seconds, between the Hello packets that the router sends on the interface.
Rtr Dead Intrvl	Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was enabled.
Tot Rx Packets	Specifies the total number of OSPF packets received on this interface since the OSPF admin status was enabled.
Rx Hellos	Specifies the total number of OSPF Hello packets received on this interface since the OSPF admin status was enabled.
Rx DBDs	Specifies the total number of OSPF Database Description packets received on this interface since the OSPF administrative status was enabled.
Rx LSRs	Specifies the total number of Link State Requests (LSRs) received on this interface since the OSPF admin status was enabled.
Rx LSUs	Specifies the total number of Link State Updates (LSUs) received on this interface since the OSPF admin status was enabled.
Rx LS Acks	Specifies the total number of Link State Acknowledgments received on this interface since the OSPF admin status was enabled.
Tot Tx Packets	Specifies the total number of OSPF packets transmitted on this virtual interface since it was created.
Tx Hellos	Specifies the total number of OSPF Hello packets transmitted on this virtual interface since it was created.
Tx DBDs	Specifies the total number of OSPF database description packets transmitted on this virtual interface.
Tx LSRs	Specifies the total number of OSPF Link State Requests (LSRs) transmitted on this virtual interface.
Tx LSUs	Specifies the total number of OSPF Hello packets transmitted on this interface since the OSPF admin status was enabled.
Tx LS Acks	Specifies the total number of OSPF Link State Acknowledgments (LSA) transmitted on this virtual interface.
Retransmits	Specifies the total number of OSPF retransmits sent on this interface since the OSPF admin status was last enabled.
Discards	Specifies the total number of OSPF packets discarded on this interface since the OSPF admin status was last enabled.
Bad Networks	Specifies the total number of OSPF packets received with invalid network or mask since the OSPF admin status was last enabled.
Bad Versions	Specifies the total number of OSPF packets received with bad OSPF version numbers since the OSPF admin status was last enabled.
Bad Areas	Specifies the total number of OSPF packets received with an area mismatch since the OSPF admin status was last enabled.
Bad Dest Addrs	Specifies the total number of OSPF packets received with the incorrect IP destination address since the OSPF admin status was last enabled.
Bad Auth Types	Specifies the total number of OSPF packets received with an invalid authorization type since the OSPF admin status was last enabled.
Auth Failures	Specifies the total number of OSPF packets received with an invalid authorization key since the OSPF admin status was last enabled.
Bad Neighbors	Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled.
Bad Pkt Types	Specifies the total number of OSPF packets received with an invalid OSPF packet type since the OSPF admin status was last enabled.
Bad Lengths	Specifies the total number of OSPF packets received on this interface with a total length not equal to the length given in the packet itself since the OSPF admin status was last enabled.
Bad Hello Int.	Specifies the total number of OSPF packets received where the hello interval given in packet was not equal to that configured on this interface since the OSPF admin status was last enabled.
Bad Dead Int.	Specifies the total number of OSPF packets received where the dead interval given in the packet was not equal to that configured on this interface since the OSPF admin status was last enabled.
Bad Options	Specifies the total number of OSPF packets received with an option that does not match those configured for this interface or area since the OSPF admin status was last enabled.
Retrans Intrvl	Specifies the length of time, in seconds, that OSPF waits before retransmitting an unacknowledged link state advertisement (LSA) to an OSPF neighbor.
Transit Delay	Specifies the time, in seconds, it takes to transmit a link state advertisement (LSA) on the interface or virtual link.
Last Event	Specifies the date and time when an event was last associated with this OSPF interface.
Tx Failures	Transmitted OSPF packets that are dropped due to resource shortage.

virtual-link

Syntax

virtual-link nbr-rtr-id area area-id [interval seconds] [repeat repeat] [ absolute | rate]

Context

[Tree] (monitor>router>ospf3 virtual-link)

[Tree] (monitor>router>ospf virtual-link)

Full Context

monitor router ospf3 virtual-link

monitor router ospf virtual-link

Description

This command displays statistical OSPF virtual link information at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified neighbor(s). The subsequent statistical information listed for each interval is displayed as a delta to the previous display.

When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.

Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.

Parameters

nbr-rtr-id

Specifies the IP address to uniquely identify a neighboring router in the autonomous system.

Values: a.b.c.d

area-id

Specifies the OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal integer.

Values: ip-address, 0 to 4294967295

seconds

Configures the interval for each display, in seconds.

Values: 3 to 60

Default: 10

repeat

Configures how many times the command is repeated.

Values: 1 to 999

Default: 10

absolute: Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

Platforms

All

virtual-neighbor

Syntax

virtual-neighbor [remote ip-address] [ detail]

Context

[Tree] (show>router>ospf3 virtual-neighbor)

[Tree] (show>router>ospf virtual-neighbor)

Full Context

show router ospf3 virtual-neighbor

show router ospf virtual-neighbor

Description

This command displays virtual neighbor information.

Parameters

remote ip-address

Displays the specified IPv4 or IPv6 address. This reduces the amount of output displayed.

Values

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D

detail: Produces detailed information on the virtual neighbor. This option produces a large amount of data. It is recommended to use detail only when requesting information for a specific neighbor.

Platforms

All

Output

OSPF Virtual Neighbor Output

OSPF Virtual Neighbor Output Fields describes OSPF virtual neighbor output fields.

Table 6. OSPF Virtual Neighbor Output Fields
Label	Description
Nbr IP Addr	The IP address this neighbor is using in its IP source address. On addressless links, this will not be 0.0.0.0, but the address of another of the neighbor's interfaces.
Nbr Rtr ID	Specifies the router ID(s) of neighboring routers.
Transit Area	Specifies the transit area ID that links the backbone area with the area that has no physical connection with the backbone.
Retrans Q Length	The current length of the retransmission queue.
No. of Neighbors	Specifies the total number of OSPF neighbors adjacent on this interface, in a state of INIT or greater, since the OSPF admin status was enabled.
Nbr State	Specifies the operational state of the virtual link to the neighboring router.
Options	Specifies the total number of OSPF packets received with an option that does not match those configured for this virtual interface or transit area since the OSPF admin status was enabled.
Events	Specifies the total number of events that have occurred since the OSPF admin status was enabled.
Last Event Time	Specifies the date and time when an event was last associated with this OSPF interface.
Up Time	Specifies the uninterrupted time, in hundredths of seconds, the adjacency to this neighbor has been up.
Time Before Dead	Specifies the amount of time, in seconds, until the dead router interval expires.
Bad Nbr States	Specifies the total number of OSPF packets received where the neighbor information does not match the information this router has for the neighbor since the OSPF admin status was last enabled.
LSA Inst fails	Specifies the total number of times an LSA could not be installed into the LSDB due to a resource allocation issue since the OSPF admin status was last enabled.
Bad Seq Nums	Specifies the total number of times when a database description packet was received with a sequence number mismatch since the OSPF admin status was last enabled.
Bad MTUs	Specifies the total number of times when the MTU in a received database description packet was larger than the MTU of the receiving interface since the OSPF admin status was enabled.
Bad Packets	Specifies the total number of times when an LS update was received with an illegal LS type or an option mismatch since the OSPF admin status was enabled.
LSA not in LSDB	Specifies the total number of times when an LS request was received for an LSA not installed in the LSDB of this router since the OSPF admin status was enabled.
Option Mismatches	Specifies the total number of times when a LS update was received with an option mismatch since the OSPF admin status was enabled.
Nbr Duplicates	Specifies the total number of times when a duplicate database description packet was received during the Exchange state since the OSPF admin status was enabled.

Output Example

A:ALA-A# show router ospf 1 virtual-neighbor
===============================================================================
Rtr Base OSPFv2 Instance 1 Virtual Neighbors
===============================================================================
Nbr IP Addr     Nbr Rtr Id      Nbr State Transit Area    RetxQ Len  Dead Time
-------------------------------------------------------------------------------
180.1.6.10      180.0.0.10      Full      0.0.0.1         0          58
180.2.9.10      180.0.0.10      Full      0.0.0.2         0          52
-------------------------------------------------------------------------------
No. of Neighbors: 2
===============================================================================
A:ALA-A# 

A:ALA-A# show router ospf virtual-neighbor detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Virtual Neighbors (detail)
===============================================================================
Virtual Neighbor Router Id : 180.0.0.10
-------------------------------------------------------------------------------
Neighbor IP Addr : 180.1.6.10           Neighbor Rtr Id  : 180.0.0.10
Neighbor State   : Full                 Transit Area     : 0.0.0.1
Retrans Q Length : 0                    Options          : -E--
Events           : 4                    Last Event Time  : 11/07/2006 17:11:56
Up Time          : 2d 17:47:17          Time Before Dead : 57 sec
Bad Nbr States   : 1                    LSA Inst fails   : 0
Bad Seq Nums     : 0                    Bad MTUs         : 0
Bad Packets      : 0                    LSA not in LSDB  : 0
Option Mismatches: 0                    Nbr Duplicates   : 0
-------------------------------------------------------------------------------
Virtual Neighbor Router Id : 180.0.0.10
-------------------------------------------------------------------------------
Neighbor IP Addr : 180.2.9.10           Neighbor Rtr Id  : 180.0.0.10
Neighbor State   : Full                 Transit Area     : 0.0.0.2
Retrans Q Length : 0                    Options          : -E--
Events           : 4                    Last Event Time  : 11/07/2006 17:11:59
Up Time          : 2d 17:47:14          Time Before Dead : 59 sec
Bad Nbr States   : 1                    LSA Inst fails   : 0
Bad Seq Nums     : 0                    Bad MTUs         : 0
Bad Packets      : 0                    LSA not in LSDB  : 0
Option Mismatches: 0                    Nbr Duplicates   : 0
===============================================================================
A:ALA-A#

virtual-neighbor

Syntax

virtual-neighbor nbr-rtr-id area area-id [ interval seconds] [repeat repeat] [ absolute | rate]

Context

[Tree] (monitor>router>ospf3 virtual-neighbor)

[Tree] (monitor>router>ospf virtual-neighbor)

Full Context

monitor router ospf3 virtual-neighbor

monitor router ospf virtual-neighbor

Description

This command displays statistical OSPF virtual neighbor information at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified OSPF virtual neighbor router. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.

When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.

Parameters

nbr-rtr-id

Specifies the IP address to uniquely identify a neighboring router in the autonomous system.

Values: a.b.c.d

area-id

Specifies the OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal integer.

Values: ip-address, 0 to 4294967295

seconds

Configures the interval for each display, in seconds.

Values: 3 to 60

Default: 10

repeat

Configures how many times the command is repeated.

Values: 1 to 999

Default: 10

absolute: Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate: Displays rate-per-second for each statistic instead of the delta.

Platforms

All

virtual-subnet

Syntax

virtual-subnet subscriber sub-ident

virtual-subnet [sap sap-id]

Context

[Tree] (show>service>id virtual-subnet)

Full Context

show service id virtual-subnet

Description

This command displays currently recorded default gateway and subnets for all virtual subnets enabled for DHCPv4 hosts in the specified service.

Parameters

sub-ident: Displays information relating to the specified subscriber ID.

sap-id: Displays information relating to the specified SAP ID.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of virtual subnet information.

Output Example

show service id 500 virtual-subnet 
===============================================================================
Virtual subnets in service 500
===============================================================================
Subscriber                  : 00:20:fc:1e:cd:52|1/1/9:200
-------------------------------------------------------------------------------
Default router              : 192.168.100.254
Subnet                      : 192.168.100.0/24
SAP                         : 1/1/9:200
-------------------------------------------------------------------------------
No. of subnets: 1
===============================================================================

Virtual Subnet Field Descriptions describes virtual subnet output fields.

Table 7. Virtual Subnet Field Descriptions
Field	Descriptions
Subscriber	The service identification that identifies the service in the service domain
Default router	The IP address of the default router received from either the DHCP or the RADIUS server
Subnet	The IP address of the subnet
SAP	The SAP associated with the service
No. of subnets	The total number of subnets for the service

vpls-fdb-stats

Syntax

vpls-fdb-stats [clear]

Context

[Tree] (tools>dump>service vpls-fdb-stats)

Full Context

tools dump service vpls-fdb-stats

Description

This command provides the VPLS FDB statistics for all services.

Platforms

All

Output

Output Example

*A:PE1# tools dump service vpls-fdb-stats
Service Manager VPLS FDB info at 01/31/2017 08:44:40:
Statistics last cleared at 01/31/2017 07:42:25
      Statistic           |    Count
--------------------------+-------------
          FdbEntriesInUse |          8
          TotalFdbEntries |     511999
       FdbMimDestIdxInUse |          0
TotalFdbMimDestIdxEntries |      32767
          FdbIsidIdxInUse |          0
TotalFdbMimIsidIdxEntries |     191999
               MacAddMsgs |         38
            MacDeleteMsgs |          0
             MacQueryMsgs |          0
              UnknownMsgs |          0
            MalformedMsgs |          0
               FailedMsgs |          0
           FdbHwTableFull |          0
       FdbHwLimitExceeded |          0
             FdbTableFull |          0
         FdbLimitExceeded |          0
   FdbMimDestIdxExhausted |          0
               MacAddReqs |         30
            DupMacAddReqs |         19
        DroppedMacAddReqs |          0
         FailedMacAddReqs |         19
               MacDelReqs |          0
            DupMacDelReqs |          0
        DroppedMacDelReqs |          0
         FailedMacDelReqs |          0
   FailedMacCmplxMapUpdts |          0
 RvplsFdbEntriesAllocated |          0
     RvplsFdbEntriesInUse |          0
EsBmacFdbEntriesAllocated |          0
    EsBmacFdbEntriesInUse |          0
*A:PE1#

vpls-sap-template

Syntax

vpls-sap-template

vpls-sap-template template-name

Context

[Tree] (show>service>template vpls-sap-template)

Full Context

show service template vpls-sap-template

Description

This command displays basic information such as summary, template name, and so on, for all SAP VPLS-templates.

Platforms

All

Output

The following output is an example of VPLS SAP template information.

Output Example

A:Dut-C# show service template vpls-sap-template squelch
===============================================================================
SAP template
===============================================================================
Template                           Saps           Last Update                  
-------------------------------------------------------------------------------
saptemplate                        30             07/26/2010 08:39:51          
-------------------------------------------------------------------------------
Entries found: 1
===============================================================================
===============================================================================
SAP Template Information
===============================================================================
Template             : saptemplate          Discard Unkn Src : disabled
MAC Aging            : enabled              MAC Learning     : enabled
BPDU Translation     : disabled             MAC Address Limit: no limit
L2pt Termination     : disabled             

STP
Admin Status         : up                   Port Priority    : 128
Port Path Cost       : 10                   Admin Edge       : disabled
Link Type            : Pt-pt                
Auto Edge            : enabled              Root Guard       : disabled

MAC Move
Limit                : blockable            Limit Level      : tertiary

Ingress
QoS Policy           : 1                    MAC Fltr         : n/a
IP Fltr              : n/a                  QoS Sched Pol    : n/a
Match QinQ Dot1p Bits: default              Shared Q Pol     : n/a
IPv6 Fltr            : n/a                  
Use Multi-Pt Shared  : disabled             Agg Rate Limit   : Max
Policer Pol          : n/a                  

Egress
QoS Policy           : 1                    MAC Fltr         : n/a
IP Fltr              : n/a                  QoS Sched Pol    : n/a
IPv6 Fltr            : n/a                  QinQ Mark Top    : disabled
Agg Rate Limit       : Max                  Policer Pol      : n/a
Frame Based Acctg    : disabled             

CPM Prot Plcy        : def                  CPM Monitor MAC  : disabled
Coll Acctg Stats     : disabled             

ETH-CFM MIP          : disabled             
ETH-CFM Squelch Level: 0 1 2 3 4 5                 
===============================================================================

vpls-sap-template-using

Syntax

vpls-sap-template-using template-name

Context

[Tree] (show>service>template vpls-sap-template-using)

Full Context

show service template vpls-sap-template-using

Description

This command displays services instantiated using vpls-sap-template.

Platforms

All

Output

The following output is an example of information about services instantiated using this VPLS template.

Output Example

A:Dut-C# show service template vpls-sap-template-using "saptemplate" 
===============================================================================
SAP template 'saptemplate' created SAPs
===============================================================================
SvcId          Sap                                Creator Svc    Vpls Group    
-------------------------------------------------------------------------------
1-10           2/1/2:1-2/1/2:10                   5000           1             
               2/2/8:1-2/2/8:10                                                
               lag-1:1.*-lag-1:10.*                                            
-------------------------------------------------------------------------------
Entries found: 30
===============================================================================

vpls-template

Syntax

vpls-template

vpls-template template-name

Context

[Tree] (show>service>template vpls-template)

Full Context

show service template vpls-template

Description

This command displays basic information/summary, template name, etc. for all VPLS templates. When a template name is specified, detailed information for the specified template, VPLS parameters, and so on, are displayed.

Platforms

All

Output

The following output is an example of VPLS template information.

Output Example

A:Dut-C# show service template vpls-template 
===============================================================================
Service template
===============================================================================
Template                           Services       Last Update                  
-------------------------------------------------------------------------------
test                               0              07/26/2010 08:40:01          
svctemplate                        10             07/26/2010 08:39:51          
-------------------------------------------------------------------------------
Entries found: 2
===============================================================================
A:Dut-C# show service template vpls-template "svctemplate" 
===============================================================================
Service template Information
===============================================================================
Template             : svctemplate          
MTU Size             : 1514                 Customer         : 10
MAC Aging            : enabled              MAC Learning     : enabled
Discard Unkn Dest    : disabled             Temp Flood Time  : Disabled
Per Svc Hashing      : disabled             

FDB
Local Age Time       : 300 secs             Remote Age Time  : 900 secs
High Watermark       : 95%                  Low Watermark    : 90%
Table Size           : 250                  

STP
Admin State          : disabled             Priority         : 32768
Bridge Max Age       : 20 secs              Bridge Hello Time: 2 secs
Bridge Fwd Delay     : 15 secs              Mode             : rstp
Hold Cnt             : 6                    

MAC Move
Rate                 : 2/sec                Retry Timeout    : 10 secs
Admin State          : disabled             Num Retries      : 3
Pri-Ports Cumu Factor: 3                    Sec Cumu Factor  : 2
=================================================================================

vpls-template-using

Syntax

vpls-template-using template-name

Context

[Tree] (show>service>template vpls-template-using)

Full Context

show service template vpls-template-using

Description

This command displays services instantiated using the VPLS-template.

Platforms

All

Output

The following output is an example of service template information.

Output Example

A:Dut-C# show service template vpls-template-using "svctemplate" 
===========================================================================
Service template 'svctemplate' created Services
===========================================================================
SvcId                    Creator Svc              Vpls Group                   
---------------------------------------------------------------------------
1-10                     5000                     1                       
---------------------------------------------------------------------------
Entries found: 10
===========================================================================

vpn-ipv4

Syntax

vpn-ipv4 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]

vpn-ipv4 [aspath-regex reg-exp] hunt [ community comm-id] [rd rd] [ brief]

vpn-ipv4 [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd]

Context

[Tree] (show>router>bgp>routes vpn-ipv4)

Full Context

show router bgp routes vpn-ipv4

Description

This command displays BGP VPN IPv4 routes.

Parameters

reg-exp: Displays routes matching the specified regular expression, up to 80 characters.

hunt: Displays entries for the specified route.

comm-id

Specifies the community ID, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm | large-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
- {target | origin}:ip-address:comm-val
- {target | origin}:asnum:ext-comm-val
- {target | origin}:ext-asnum:comm-val
- bandwidth:asnum:val-in-mbps
- ext:4300:ovstate
- ext:value1:value2
- flowspec-set:ext-asnum:group-id
where:
- target — route target
- origin — route origin
- ip-address — a.b.c.d
- ext-comm-val — 0 to 4294967295
- ext-asnum — 0 to 4294967295
- bandwidth — bandwidth
- val-in-mbps — 0 to 16777215
- ext — extended
- ext:4300 — origin verification
- ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
- value1 — 0000 to FFFF
- value2 — 0 to FFFFFFFFFFFF
- flowspec-set — flow-spec set
- group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole
large-comm — asn-or-ex:val-or-ex:val-or-ex

rd

Displays information for the route distinguisher.

Values: ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val

brief: Displays the BGP VPN IPv4 route information in a brief format.

Platforms

All

vpn-ipv6

Syntax

vpn-ipv6 [aspath-regex reg-exp] [community comm-id] [rd rd] [brief]

vpn-ipv6 [aspath-regex reg-exp] hunt [ community comm-id] [rd rd] [ brief]

vpn-ipv6 [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd]

Context

[Tree] (show>router>bgp>routes vpn-ipv6)

Full Context

show router bgp routes vpn-ipv6

Description

This command displays BGP VPN IPv6 routes.

Parameters

reg-exp: Displays routes matching the specified regular expression, up to 80 characters.

hunt: Displays entries for the specified route.

comm-id

Specifies the community ID, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm | large-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
- {target | origin}:ip-address:comm-val
- {target | origin}:asnum:ext-comm-val
- {target | origin}:ext-asnum:comm-val
- bandwidth:asnum:val-in-mbps
- ext:4300:ovstate
- ext:value1:value2
- flowspec-set:ext-asnum:group-id
where:
- target — route target
- origin — route origin
- ip-address — a.b.c.d
- ext-comm-val — 0 to 4294967295
- ext-asnum — 0 to 4294967295
- bandwidth — bandwidth
- val-in-mbps — 0 to 16777215
- ext — extended
- ext:4300 — origin verification
- ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
- value1 — 0000 to FFFF
- value2 — 0 to FFFFFFFFFFFF
- flowspec-set — flow-spec set
- group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole
large-comm — asn-or-ex:val-or-ex:val-or-ex

rd

Displays information for the route distinguisher.

Values: ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val

brief: Displays the BGP VPN IPv6 route information in a brief format.

Platforms

All

vport

Syntax

vport name [interval seconds] [repeat repeat] [ absolute | rate]

vport name [interval seconds] [repeat repeat] monitor-threshold

Context

[Tree] (monitor>port vport)

Full Context

monitor port vport

Description

This command monitors Vport statistics.

Parameters

name: Specifies the Vport name, up to 32 characters.

seconds

Specifies the interval for each display, in seconds.

Values: 11 to 60

repeat

Specifies the number of times the command is repeated.

Values: 1 to 999

absolute: When the absolute keyword is specified, the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.

rate: When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the delta.

monitor-threshold: Displays the exceed count for the port-scheduler under Vport (if specified) or for a physical port.

Platforms

All

vport

Syntax

vport [name] [statistics | associations] [ monitor-threshold] [port-sched | hw-agg-shaper-sched]

Context

[Tree] (show>port vport)

Full Context

show port vport

Description

This command displays Vport information.

Parameters

name: Specifies the Vport name, up to 32 characters.

statistics: Displays the statistics related to the Vport.

associations: Displays the associations related to the Vport.

monitor-threshold: Displays the exceed count for the port-scheduler under Vport (if specified) or for a physical port.

port-sched: Displays the port scheduler policy associated with the Vport.

hw-agg-shaper-sched: Displays the hardware aggregate shaper scheduler policy associated with the Vport.

Platforms

All

vport

Syntax

vport summary

Context

[Tree] (show>qos vport)

Full Context

show qos vport

Description

This command displays Vport information.

Parameters

summary: Displays summary information.

Platforms

All

vrf-export-test

Syntax

vrf-export-test policy-name[policy-name...{up tp 15 max}] prefixip-prefix/ip-prefix-length[longer] [ display-rejects] [display-rejects-only] [protocol protocol]

vrf-export-test plcy-or-long-expr[plcy-or-expr [ plcy-or-expr...{up tp 14 max}] prefixip-prefix/ip-prefix-length[ longer] [display-rejects] [display-rejects-only] [protocol protocol]

Context

[Tree] (show>router vrf-export-test)

Full Context

show router vrf-export-test

Description

This command tests an existing route policy, a chain of route policies, or a route policy logical expression in order to assess its effects as a VRF export policy. This is determined by identifying the routes that would be accepted or rejected after the complete evaluation.

Parameters

plcy-or-long-expr

Specifies up to 14 policy names or a long expression.

Values

policy-name: a policy name, up to 64 characters

long-expr: a long expression, up to 255 characters.

plcy-or-expr

Specifies the policy name or expression.

Values

policy-name: a policy name, up to 64 characters

expr: an expression, up to 64 characters

policy-name: Specifies the policy name of an existing configured and committed policy, up to 64 characters.

longer: Matches prefixes with a longer prefix-length.

ip-prefix/ip-prefix-length: Specifies an IPv4 or IPv6 prefix/mask to be evaluated. The keyword longer may be specified to evaluate longer prefix matches (optional).

display-rejects: Displays routes that were rejected by the policy. If not specified, only a count of rejected routes is displayed.

display-rejects-only: Displays only routes rejected by the policy test.

protocol: Displays routes by the protocol type.

Platforms

All

Output

Output Example

*A:Dut-B# show router 20 vrf-export-test "test" prefix 0.0.0.0/0 longer protocol direct
 
===============================================================================
Route Table (Service: 20)
===============================================================================
Accepted by Policy test Entry 1
    Dest prefix: 30.30.30.30/32
    Protocol   : LOCAL
Accepted by Policy test Entry 1
    Dest prefix: 40.0.0.0/24
    Protocol   : LOCAL
Accepted by Policy test Entry 1
    Dest prefix: 50.1.0.0/16
    Protocol   : LOCAL
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 3
===============================================================================

The following table describes the VRF Export Test output fields.

Table 8. Show VRF Export Test Information Fields
Label	Description
Dest prefix	Displays the destination IPv4 or IPv6 prefix/mask.
Protocol	Displays the protocol type.

vxlan

Syntax

vxlan [instance vxlan-instance] assisted-replication replicator

vxlan esi esi [instance vxlan-instance] [detail]

vxlan instance vxlan-instance oper-flags

vxlan [instance vxlan-instance]

vxlan [instance vxlan-instance] [detail] destinations

vxlan detail

Context

[Tree] (show>service>id vxlan)

Full Context

show service id vxlan

Description

This command displays the VXLAN instance parameters. With destinations added, the command shows the VXLAN bindings auto-created or configured in a specified service. The service command can be filtered by VXLAN instance, if the service has more than one instance. A VXLAN binding is composed of the remote (VTEP) and the corresponding egress (VNI) to identify the service at the egress node. The command shows the number of MACs associated to each binding as well as the operational status and if the binding is part of the multicast list. The binding will be operationally down when the VTEP address is not found in the base routing table (the VTEP address cannot be reached). A binding will be part of a multicast list if a valid BGP EVPN inclusive multicast route exists for it.

A VXLAN binding can be associated with the following types of multicast values.

BM — Refers to the capability of the binding to send broadcast or multicast to the remote VTEP. This binding type is setup to AR replicator nodes from a leaf node.
BUM — Refers to the capability of the binding to send broadcast or multicast to the remote VTEP. This binding type is setup to AR replicator nodes from a leaf node.
U — Refers to the capability of the binding to send unknown unicast to the VTEP. This binding type is setup from leaf nodes to other leaf and RNVE nodes.
"-” — Specifies that the binding can only be used for known unicast traffic.

Parameters

assisted-replication replicator

Displays all the discovered candidate AR replicators for the service and the replicator that has been selected by the leaf to send the BM traffic. The list of replicators is ordered by VTEP address and VNI. This command is only supported on the nodes configured as leaf.

The "In Use” column indicates whether the replicator has been selected for the service. When selecting a replicator for the service, the candidate list is ordered by VTEP IP (lowest IP is ordinal 0) and VNI. A modulo function of the service ID and the number of candidate PEs will give the selected replicator for a specified service.

The "Pending Time” column shows the remaining seconds until the node starts sending the BM traffic to the replicator. This time is configurable by the replicator-activation-time parameter.

For services supporting EVPN multi-homing, the command can also show ES destinations as well as VXLAN bindings. In this case, the output can be filtered by the ESI in order to see the VXLAN destinations that the ES is comprised of.

esi: Specifies a 10-byte ESI by which to filter the displayed information. For example, ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ')

instance

Specifies the VXLAN instance.

Values: 1, 2

detail: Keyword used to display detailed information.

oper-flags: Keyword used to display the operational flags.

Platforms

All

Output

Output Example

show service id "evi-112-vxlan-cw-mtu" vxlan destinations

===============================================================================
Egress VTEP, VNI (Instance 1)
===============================================================================
VTEP Address                                        Egress VNI Oper  Mcast Num
                                                               State       MACs
-------------------------------------------------------------------------------
192.0.2.2                                           112        Down  BUM   0
192.0.2.3                                           112        Down  BUM   0
-------------------------------------------------------------------------------
Number of Egress VTEP, VNI : 2
===============================================================================

show service id "evi-112-vxlan-cw-mtu" vxlan destinations detail

===============================================================================
Egress VTEP, VNI (Instance 1)
===============================================================================
VTEP Address                                        Egress VNI Oper  Mcast Num
                                                               State       MACs
-------------------------------------------------------------------------------
192.0.2.2                                           112        Down  BUM   0
  Oper Flags       : MTU-Mismatch
  Type             : evpn
  L2 PBR           : No
  Sup BCast Domain : No
  Last Update      : 01/31/2023 21:28:39
192.0.2.3                                           112        Down  BUM   0
  Oper Flags       : MTU-Mismatch
  Type             : evpn
  L2 PBR           : No
  Sup BCast Domain : No
  Last Update      : 01/31/2023 21:28:39
-------------------------------------------------------------------------------
Number of Egress VTEP, VNI : 2
===============================================================================

show service id 900 vxlan instance 1


===============================================================================
VPLS VXLAN, Vxlan Instance: 1, VNI: 900
===============================================================================
Creation Origin: manual
Assisted-Replication: none
RestProtSrcMacAct: none
===============================================================================
VPLS VXLAN service Network Specifics
===============================================================================
-------------------------------------------------------------------------------
Ing Net QoS Policy: none 
Ingress FP QGrp   : (none)                  Ing FP QGrp Inst        : (none)
VTEP security     : disabled                MAC Learning            : enabled
MAC Aging         : enabled                 Discard Unknown Source  : disabled
MAC address limit : 0 
====================================================================================
========================================================================

show service id 7000 vxlan assisted-replication replicator

===============================================================================
Vxlan AR Replicator Candidates
===============================================================================
VTEP Address           Egress VNI     In Use  In Candidate List Pending Time
-------------------------------------------------------------------------------
10.4.4.4                7000           yes     yes               0
10.5.5.5                7000           no      yes               0
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================

show service id 500 vxlan instance 1 oper-flags

=============================================================================== 
VPLS VXLAN oper flags 
=============================================================================== 
MhStandby                              : false 
===============================================================================

Show VXLAN Information Fields describes the VXLAN output fields.

Table 9. Show VXLAN Information Fields
Label	Description
VXLAN Instance	Displays the VXLAN instance.
VNI	Displays the VNI.
AR	Displays the AR.
Oper-flags	Displays the operational flags.
VTEP security	Displays the VTEP security status (enabled, disabled).
Number of entries	Indicates the number of entries.
Creation Origin	Displays the creation origin value.
Assisted-Replication	Displays the assisted replication value.
RestProtSrcMacAct	Displays the RestProtSrcMacAct value.
Ing Net QoS Policy	Displays the Ing Net QoS Policy value.
Ingress FP QGrp	Displays the Ingress FP QGrp value.
Ing FP QGrp Inst	Displays the Ing FP QGrp Inst value.
MAC Learning	Displays the MAC learning value.
MAC Aging	Displays the MAC aging value.
Discard Unknown Source	Displays the discard unknown source value.
MAC address limit	Displays the MAC address limit.
VTEP Address	Displays the VTEP IP address.
Egress VNI	Displays the Egress VNI value.
In Use	Displays the In use value.
In Candidate List	Displays the In Candidate list value.
Pending Time	Displays the Pending time value.
MhStandby	Displays the MhStandby flag value.
Eth SegId	Displays the Ethernet Segment ID value.
TEP Address	Displays the TEP IP address.
Instance	Displays the Instance value.
Evpn/Static	Displays the Evpn/Static value.
Num. MACs	Displays the number of MACs.
Mcast	Displays the Mcast value.
Oper State	Displays the operational state.
L2 PBR	Displays the Layer 2 PBR value.
Sup BCast Domain	Displays the Sup BCast Domain value.

vxlan

Syntax

vxlan [ip-address]

Context

[Tree] (show>service vxlan)

Full Context

show service vxlan

Description

This command displays the VXLAN bindings auto-created in a specified service. A VXLAN binding is composed of the remote VTEP (VXLAN Termination Endpoint) and the corresponding egress VNI (VXLAN Network Identifier) to identify the service at the egress node. The command shows the number of MACs associated to each binding as well as the operational status and if the binding is part of the multicast list. The binding will be operationally down when the VTEP address is not found in the base routing table (the VTEP address cannot be reached). A binding will be part of the multicast list if a valid BGP EVPN inclusive multicast route exists for it.

A VXLAN binding can be associated with the following types of Mcast values.

BM — Refers to the capability of the binding to send Broadcast or Multicast to the remote VTEP. This binding type is setup to AR Replicator nodes from a Leaf node.
BUM — Refers to the capability of the binding to send Broadcast or Multicast to the remote VTEP. This binding type is setup to AR Replicator nodes from a Leaf node.
U — Refers to the capability of the binding to send Unknown Unicast to the VTEP. This binding type is setup from Leaf nodes to other Leaf and RNVE nodes.
"-” — Specifies that the binding can only be used for known unicast traffic.

Parameters

ip-address

Specifies the remote VTEP address for the VXLAN binding.

Values

ipv4-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

where:

x: [0 to FFFF]H

d: [0 to 255]D

Platforms

All

Output

Output Example

===============================================================================
A:PE6# show service vxlan         
===============================================================================
VXLAN Tunnel Endpoints (VTEPs)
===============================================================================
VTEP Address                                 Number of Egress VNIs    Oper
                                                                      State
-------------------------------------------------------------------------------
10.2.2.2                                     1                        Up
10.4.4.4                                     2                        Up
10.5.5.5                                     1                        Up
192.0.2.2                                    1                        Up
192.0.2.3                                    1                        Up
192.0.2.4                                    2                        Up
192.0.2.5                                    2                        Up
-------------------------------------------------------------------------------
Number of VTEPs: 7
-------------------------------------------------------------------------------
===============================================================================
A:PE6# show service vxlan 2.2.2.2 
===============================================================================
VXLAN Tunnel Endpoint: 2.2.2.2
===============================================================================
Egress VNI                    Service Id               Oper State
-------------------------------------------------------------------------------
4000                          4000                     Up
-------------------------------------------------------------------------------
===============================================================================

vxlan

Syntax

vxlan

Context

[Tree] (show>service>system vxlan)

Full Context

show service system vxlan

Description

This command shows the global VXLAN configuration in the system. In particular, the command displays the configured assisted-replication IP address and the VXLAN tunnel-termination addresses, if the system terminates VXLAN tunnels in addresses that are not the same as the system IP address.

Platforms

All

Output

Output Example

A:PE1# show service system vxlan 
===============================================================================
System VXLAN Information
===============================================================================
Asstd Repl Ip Address.                 : 
===============================================================================
===============================================================================
Vxlan Tunnel Termination
===============================================================================
Tunnel Term IP                               FPE ID    Last Change
-------------------------------------------------------------------------------
10.11.11.1                                   1         06/22/2016 14:18:55
-------------------------------------------------------------------------------
Number of Entries: 1
-------------------------------------------------------------------------------
===============================================================================

vxlan

Syntax

vxlan [clear]

Context

[Tree] (tools>dump>service>id vxlan)

Full Context

tools dump service id vxlan

Description

This command displays the number of times a service could not add a VXLAN binding or <VTEP, Egress VNI> due to the following limits:

The per-system VTEP limit has been reached
The per-system <VTEP, Egress VNI> limit has been reached
The per-service <VTEP, Egress VNI> limit has been reached
The per-system Bind limit: Total bind limit or vxlan bind limit has been reached.

Parameters

clear: Clears the per-system VTEP, per-system VTEP Egress VNI, per-service VTEP Egress VNI, and per-system Bind statistics.

Platforms

All

Output

Output Example

*A:PE63# tools dump service id 3 vxlan
VTEP, Egress VNI Failure statistics at 000 00:03:55.710:
statistics last cleared at 000 00:00:00.000:
      Statistic            |    Count
---------------------------+-------------
                      VTEP |          0
             Service Limit |          0
              System Limit |          0
   Egress Mcast List Limit |          0

vxlan-instance-using

Syntax

vxlan-instance-using ethernet-segment [name]

Context

[Tree] (show>service vxlan-instance-using)

Full Context

show service vxlan-instance-using

Description

This command displays the services and VXLAN instances associated with a specified virtual ES, as well as its operational status.

Parameters

name: Specifies the virtual ES name, up to 32 characters.

Platforms

All

Output

Output Example

A:PE-2# show service vxlan-instance-using ethernet-segment "vES23" 
===============================================================================
VXLAN Ethernet-Segment Information
===============================================================================
SvcId                            VXLAN Instance                  Status
-------------------------------------------------------------------------------
500                              1                               DF
===============================================================================
A:PE-2# show service vxlan-instance-using ethernet-segment         
===============================================================================
VXLAN Ethernet-Segment Information
===============================================================================
SvcId       VXLAN Instance      ES Name                          Status
-------------------------------------------------------------------------------
500         1                   vES23                            DF
===============================================================================