Getting started

About this guide

This guide describes system concepts and provides configuration explanations and examples to configure SR OS boot option file (BOF), file system and system management functions.

This guide is organized into functional chapters and provides concepts and descriptions of the implementation flow, as well as Command Line Interface (CLI) syntax and command usage.

Note: Unless otherwise indicated, CLI commands, contexts, and configuration examples in this guide apply for both the MD-CLI and the classic CLI.

The topics and commands described in this document apply to the:

7450 ESS
7750 SR
7950 XRS
Virtualized Service Router

For a list of unsupported features by platform and chassis, see the SR OS R23.x.Rx Software Release Notes, part number 3HE 19269 000x TQZZA.

Command outputs shown in this guide are examples only; actual displays may differ depending on supported functionality and user configuration.

Note:

The SR OS CLI trees and command descriptions can be found in the following guides:

7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide
7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Monitor, Show, and Tools CLI Command Reference Guide (for both the MD-CLI and the classic CLI)
7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide

Note:

This guide generically covers Release 23.x.Rx content and may contain some content that will be released in later maintenance loads. See the SR OS R23.x.Rx Software Release Notes, part number 3HE 19269 000x TQZZA, for information about features supported in each load of the Release 23.x.Rx software.

System configuration process

Configuration process lists the tasks necessary to configure system security and access functions and logging features on the 7450 ESS, 7750 SR, and 7950 XRS platforms. Each chapter in this book is presented in an overall logical configuration flow. Each section describes a software area and the CLI command usage to configure the functional area.

Table 1. Configuration process
Area	Task	Section
System security	Configure system security	Configuring security with CLI
	Configure RADIUS	RADIUS configurations
	Configure TACACS+	TACACS+ configurations
	Configure LDAP	LDAP configurations
	Configure login controls	Configuring login controls
Network management	Configure SNMP elements	Configuring SNMP with CLI
Secure network management	Configure NETCONF elements	NETCONF
Operational functions	Configure event and accounting logs	Configuring logging with CLI
Data management	Configure sFlow elements	sFlow
Network monitoring	Configure telemetry	gRPC gRPC tunnels
Network security	Configure TLS server and client	Common configuration tasks
Equipment monitoring	Configure facility alarms	Configuring facility alarms with CLI

Note: All features are supported on all SR OS platforms (7750 SR, 7450 ESS, and 7950 XRS) unless indicated otherwise.

Node management using VPRN

While customarily node management is operated either via the out-of-band interface or in-band via the Base routing instance, it is also possible to manage the node using a VPRN. Both IPv4 and IPv6 are supported.

The following management plane clients are supported using VPRN:

DNS
gRPC (dial-out telemetry)
RADIUS
SNMP (traps)
SSH
Syslog
TACACS+
Telnet

The following servers are supported using VPRN:

FTP
gRPC
NETCONF (including notifications)
SNMP
SSH
Telnet

For more details, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR Layer 3 Services Guide: IES and VPRN, "Node management using VPRN".

Conventions

This section describes the general conventions used in this guide.

Precautionary and information messages

The following information symbols are used in the documentation.

DANGER: Danger warns that the described activity or situation may result in serious personal injury or death. An electric shock hazard could exist. Before you begin work on this equipment, be aware of hazards involving electrical circuitry, be familiar with networking environments, and implement accident prevention procedures.

WARNING: Warning indicates that the described activity or situation may, or will, cause equipment damage, serious performance problems, or loss of data.

Caution: Caution indicates that the described activity or situation may reduce your component or system performance.

Note: Note provides additional operational information.

Tip: Tip provides suggestions for use or best practices.

Options or substeps in procedures and sequential workflows

Options in a procedure or a sequential workflow are indicated by a bulleted list. In the following example, at step 1, the user must perform the described action. At step 2, the user must perform one of the listed options to complete the step.

Options in a procedure

User must perform this step.
This step offers three options. User must perform one option to complete this step.
- This is one option.
- This is another option.
- This is yet another option.

Substeps in a procedure or a sequential workflow are indicated by letters. In the following example, at step 1, the user must perform the described action. At step 2, the user must perform two substeps (a. and b.) to complete the step.

Substeps in a procedure

User must perform this step.
User must perform all substeps to complete this action.
1. This is one substep.
2. This is another substep.