d Commands

dampening

dampening

Syntax

dampening

Context

[Tree] (clear>port>eth dampening)

Full Context

clear port ethernet dampening

Description

This command clears Exponential Port Dampening (EPD) accumulated penalties on the port.

Platforms

All

damping

damping

Syntax

damping [ip-prefix [/ip-prefix-length]] [ damp-type] [detail] [ ipv4]

damping [ip-prefix [/ip-prefix-length]] [ damp-type] [detail] { ipv6 | label-ipv4 | label-ipv6 | mcast-ipv4 | mcast-ipv6 | mvpn-ipv4 | vpn-ipv4 | vpn-ipv6}

Context

[Tree] (show>router>bgp damping)

Full Context

show router bgp damping

Description

This command displays BGP routes with have been dampened due to route flapping. This command can be entered with or without a route parameter.

When the keyword detail is included, more detailed information displays.

When only the command is entered (without any parameters included except detail), then all dampened routes are listed.

When a parameter is specified, then the matching route or routes are listed.

When a decayed, history, or suppressed keyword is specified, only those types of dampened routes are listed.

Parameters

ip-prefix[ip-prefix-length]

Displays damping information for the specified IP prefix length.

Values

ipv4-prefix: a.b.c.d (host bits must be 0)

ipv4-prefix-le: 0 to 32

ipv6-prefix:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF] H

  • d: [0 to 255] D

ipv6-prefix-le: 0 to 128

damp-type

Displays damping type for the specified IP address.

decayed

Displays damping entries that are decayed but are not suppressed.

history

Displays damping entries that are withdrawn but have history.

suppressed

Displays damping entries suppressed because of route damping.

detail

Displays detailed information.

ipv4

Displays damped routes for the IPv4 family.

ipv6

Displays damped routes for the IPv6 family.

label-ipv4

Displays damped routes for the label IPv4 family.

label-ipv6

Displays damped routes for the label IPv6 family.

mcast-ipv4

Displays damped routes for the MCAST IPv4 family.

mcast-ipv6

Displays damped routes for the MCAST IPv6 family.

mvpn-ipv4

Displays damped routes for the MVPN IPv4 family.

vpn-ipv4

Displays damped routes for the VPN IPv4 family.

vpn-ipv6

Displays damped routes for the VPN IPv6 family.

Platforms

All

Output

The following output is an example of BGP damping information, and Show Damping Field Descriptions describes the output fields.

Output Example
*A:ALA-12# show router 3 bgp damping 
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes
==============================================================================
Flag  Network            From            Reuse       AS-Path 
------------------------------------------------------------------------------
ud*i  10.149.7.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      1239  22406 
si    10.155.6.0/23      10.0.28.1       00h43m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.8.0/22      10.0.28.1       00h38m31s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.12.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.22.0/23     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.24.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.28.0/22     10.0.28.1       00h34m31s   60203 65001 19855 3356
                                                      2914  7459 
si    10.155.40.0/21     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
si    10.155.48.0/20     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
ud*i  10.8.140.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  10.8.141.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  10.9.0.0/18        10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      3561  9658  6163 
. . .
ud*i  10.213.184.0/23    10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      6774  6774  9154 
------------------------------------------------------------------------------
*A:ALA-12#


*A:ALA-12# show router 3 bgp damping detail 
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - 
 valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes
==============================================================================
------------------------------------------------------------------------------
Network : 10.149.7.0/24
------------------------------------------------------------------------------
Network          : 10.149.7.0/24        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h22m09s            Last update      : 02d00h58m
FOM Present      : 738                  FOM Last upd.    : 2039
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  1239  22406
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network          : 10.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  3561  5551  1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network          : 10.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.192.0/18
-------------------------------------------------------------------------------
Network          : 10.203.192.0/18      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h00m07s            Last update      : 02d01h20m
FOM Present      : 1018                 FOM Last upd.    : 1024
Number of Flaps  : 1                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#


*A:ALA-12# show router 3 bgp damping 10.203.192.0/18 detail
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes 10.203.192.0/18
==============================================================================
Network : 10.203.192.0/18
------------------------------------------------------------------------------
Network          : 10.203.192.0/18      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h00m42s            Last update      : 02d01h20m
FOM Present      : 2003                 FOM Last upd.    : 2025
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Paths : 1
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 bgp damping suppressed detail      
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes (Suppressed)
==============================================================================
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network          : 10.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network          : 10.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.240.0/20
------------------------------------------------------------------------------
Network          : 10.203.240.0/20      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 10.206.0.0/17
------------------------------------------------------------------------------
Network          : 10.206.0.0/17        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 10.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#

Table 1. Show Damping Field Descriptions

Label

Description

BGP Router ID

The local BGP router ID.

AS

The configured autonomous system number.

Local AS

The configured or inherited local AS for the specified peer group. If not configured, then it is the same value as the AS.

Network

Route IP prefix and mask length for the route.

Flag(s)

Legend:

Status codes: u- used, s-suppressed, h-history, d-decayed, *-valid. If a * is not present, then the status is invalid.

Origin codes: i-IGP, e-EGP, ?-incomplete, >-best

Network

The IP prefix and mask length for the route.

From

The originator ID path attribute value.

Reuse time

The time when a suppressed route can be used again.

AS Path

The BGP AS path for the route.

Peer

The router ID of the advertising router.

NextHop

BGP nexthop for the route.

Peer AS

The autonomous system number of the advertising router.

Peer Router-Id

The router ID of the advertising router.

Local Pref

BGP local preference path attribute for the route.

Age

The time elapsed since the service was enabled.

Last update

The time when BGP was updated last in second/minute/hour (SS:MM:HH) format.

FOM Present

The current Figure of Merit (FOM) value.

Number of Flaps

The number of flaps in the neighbor connection.

Reuse time

The time when the route can be reused.

Path

The BGP AS path for the route.

Applied Policy

The applied route policy name.

damping

Syntax

damping [{ip-prefix/ip-prefix-length] [neighbor ip-address]} | group name]

Context

[Tree] (clear>router>bgp damping)

Full Context

clear router bgp damping

Description

This command clears or resets the route damping information for received routes.

Parameters

ip-prefix/ip-prefix-length

Clears damping information for entries that match the IP prefix and prefix length.

Values

ipv4-prefix:

  • a.b.c.d (host bits must be 0)

ipv4-prefix-length: [0 to 32]

ipv6-prefix:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

ipv6-prefix-length: [0 to 128]

neighbor ip-address

Clears damping information for entries received from the BGP neighbor.

Values

ipv4-address:

  • a.b.c.d

ipv6-prefix:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

interface: up to 32 characters, mandatory for link local addresses

group name

Clears damping information for entries received from any BGP neighbors in the peer group.

Values

up to 32 characters

Platforms

All

data-trigger

data-trigger

Syntax

data-trigger sap sap-id

Context

[Tree] (clear>service>dynsvc data-trigger)

Full Context

clear service dynamic-services data-trigger

Description

This command deletes all dynamic services associated with a dynamic services data trigger.

Note:

This command is not available in the MD-CLI.

Parameters

sap-id

Specifies the dynamic services data trigger SAP to delete.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

data-triggers

data-triggers

Syntax

data-triggers [sap sap-id] [ summary]

Context

[Tree] (show>service>dynsvc data-triggers)

Full Context

show service dynamic-services data-triggers

Description

This command displays the active dynamic services data trigger details.

Note:

This command is not available in the MD-CLI.

Parameters

sap-id

Specifies the dynamic services SAP for which the details are shown.

summary

Limits the output to one line per data trigger SAP.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of data trigger information.

Output Example
# show service dynamic-services data-triggers
===============================================================================
Dynamic Services Data-triggers
===============================================================================
SAP                         : 1/1/4:1214.101
-------------------------------------------------------------------------------
Acct session-ID             : 144DFF0000009156A24138
MAC                         : 00:51:00:dd:01:01
IP                          :
State                       : sapCreated
-------------------------------------------------------------------------------
No. of Data-triggers: 1
=============================================================================== 

Data Trigger Field Descriptions describes data trigger fields.

Table 2. Data Trigger Field Descriptions

Output field

Description

Acct session-ID

The RADIUS accounting session ID for this dynamic services data trigger. This accounting session ID is used as an accounting multi-session ID in RADIUS accounting for the associated dynamic services. It can also be used as a key in CoA or Disconnect Messages to set up or terminate associated dynamic services.

MAC

The MAC address learned to set up this dynamic service data trigger. The MAC address is included in the Access-Request message for RADIUS authentication.

IP

The IPv4 or IPv6 address learned to set up this dynamic service data trigger. If the data trigger packet was not an IP packet, then this field is empty. When available, the IP address is included in the RADIUS authentication and accounting messages.

State

The current state of the dynamic service data trigger:

Pending—(initial state) data trigger received and authentication started

Accepted—(transient state) authentication succeeded; dynsvc script started but not yet completed

sapCreated—(final state) corresponding dynamic services sap created

database

database

Syntax

database

Context

[Tree] (show>service>id>spb database)

Full Context

show service id spb database

Description

This command displays SPB database information.

Platforms

All

Output

The following output is an example of service SPB database information.

Output Example
*A:Dut-A# show service id 100001 spb database
===============================================================================
ISIS Database
===============================================================================
LSP ID                                  Sequence  Checksum Lifetime Attributes
-------------------------------------------------------------------------------

Displaying Level 1 database
-------------------------------------------------------------------------------
Dut-A.00-00                             0xc       0xbaba   1103     L1
Dut-B.00-00                             0x13      0xe780   1117     L1
Dut-C.00-00                             0x13      0x85a    1117     L1
Dut-D.00-00                             0xe       0x174a   1119     L1
Level (1) LSP Count : 4
===============================================================================

database

Syntax

database [group grp-ip-address] [source src-ip-address]] [family]

database evpn-mpls [group grp-ip-address] [ source src-ip-address] [family]

database sap sap-id [group grp-ip-address] [source src-ip-address] [ family]

database sdp sap-id:vc-id [group grp-ip-address] [source src-ip-address] [ family]

database vxlan vtep ip-address vni vni-id [group grp-ip-address] [source src-ip-address]] [family]

Context

[Tree] (clear>service>id>pim-snooping database)

Full Context

clear service id pim-snooping database

Description

This command clears PIM snooping source group database information.

Parameters

sap-id

Clears PIM snooping SAP information

sdp-id

Clears PIM snooping entries associated with the specified SDP. For a spoke-SDP, the VC ID must be specified; for a mesh SDP, the VC ID is optional.

Values

1 to 17407

grp-ip-address

Clears PIM snooping information matching the specified group address

src-ip-address

Clears PIM snooping information matching one particular source within the multicast group

family

Displays either IPv4 or IPv6 information

Values

ipv4 or ipv6

evpn-mpls

Clears PIM snooping statistics for EVPN-MPLS destinations

Platforms

All

database

Syntax

database [ip-address [/ mask] [longer]] [peer ip-address] [detail [qos]]

Context

[Tree] (show>router>rip database)

Full Context

show router rip database

Description

Displays all routes in the RIP database.

Parameters

ip-address /mask

Specifies the IP address.

Values

ip-address: a.b.c.d.

mask: 1 to 32

longer

Specifies the longer prefix match entries should also be displayed.

peer ip-address

Specifies the peer IP address.

Values

a.b.c.d

detail

Displays detailed information.

qos

Specifies the QoS.

Platforms

All

Output

The following output is an example of RIP route database information, and Show RIP Database Field Descriptions describes the output fields.

Output Example
*A:ALA-1#  show rip database 
==============================================================================
RIP Route Database                                                             
==============================================================================
Destination       Peer            NextHop         Metric  Tag     TTL   Valid
------------------------------------------------------------------------------
10.0.0.10/32      10.1.7.15       0.0.0.0         2       0x0000  163   No   
10.0.0.10/32      10.1.8.14       0.0.0.0         2       0x0000  179   No   
10.0.0.14/32      10.1.8.14       0.0.0.0         1       0x0000  179   Yes  
10.0.6.0/24       10.1.7.15       0.0.0.0         11      0x2002  163   No   
10.0.6.0/24       10.1.8.14       0.0.0.0         11      0x2002  179   No   
10.0.7.0/24       10.1.7.15       0.0.0.0         11      0x2002  163   No   
10.0.7.0/24       10.1.8.14       0.0.0.0         11      0x2002  179   No   
10.1.5.0/24       10.1.7.15       0.0.0.0         2       0x0000  151   Yes  
10.1.5.0/24       10.1.8.14       0.0.0.0         1       0x0000  167   No   
10.100.17.16/31   10.1.7.15       0.0.0.0         2       0x0000  151   No   
10.100.17.16/31   10.1.8.14       0.0.0.0         2       0x0000  167   No   
------------------------------------------------------------------------------
No. of Routes: 11                                                              
==============================================================================
*A:ALA-12#
Table 3. Show RIP Database Field Descriptions

Label

Description

Destination

The RIP destination for the route.

Peer

The router ID of the peer router.

NextHop

The IP address of the next hop.

Metric

The hop count to rate the value of different hops.

Tag

The value to distinguish between internal routes (learned by RIP) and external routes (learned from other protocols).

TTL

Displays the number of seconds the specific route will remain in the routing table. When an entry reaches 0, it is removed from the routing table.

Valid

No — The route is not valid.

Yes — The route is valid.

database

Syntax

database

Context

[Tree] (clear>router>rip database)

Full Context

clear router rip database

Description

This command flushes all routes in the RIP database.

Platforms

All

database

Syntax

database [sub-domain sub-domain] [ template template-name]

Context

[Tree] (show>router>bier database)

Full Context

show router bier database

Description

This command shows the BIER database and assigned labels for <SD, BSL, SI>.

Parameters

sub-domain

Displays detailed information about the sub-domain.

Values

0 to 255

template-name

Displays template name, up to 32 characters.

Platforms

All

Output

The following output is an example of a BIER database. Bier Database Fields provides BIER database field descriptions.

Output Example
*A:Dut-A# show router bier database 
===============================================================================
BIER Database
===============================================================================
Template                         MT             Sub-domain     BSL
BFR-ID                           Start          End            Total
BFR-Prefix                                                     
-------------------------------------------------------------------------------
temp1                            ipv4-unicast   0              256
1                                1048464        1048479        16
10.20.1.1                                                      
 
temp1                            ipv4-unicast   1              256
255                              1048447        1048462        16
10.20.1.1                                                      
 
temp1                            ipv4-unicast   2              256
2966                             1048430        1048445        16
10.20.1.1                                                      
 
temp1                            ipv4-unicast   3              256
1                                1048413        1048428        16
10.20.1.1                                                      
 
temp1                            ipv4-unicast   4              256
255                              1048396        1048411        16
10.20.1.1                                                      
 
===============================================================================
BIER Database entries : 5
===============================================================================
*A:Dut-A#
Table 4. Bier Database Fields

Label

Description

Template

The template name

MT

The IGP topology associated with the sub-domain

Sub-domain

The sub-domain ID

BSL

The BitStringLength used in the sub-domain

BFR-ID

The BFR ID which identifies the router in the BitString

Start

The start label allocated for this sub-domain

End

The end label allocated for this sub-domain

Total

The total number of labels allocated for this sub-domain

BFR-Prefix

The routable IP address of a BFR, used by BIER to identify a BFR

database

Syntax

database [group grp-ip-address] [source src-ip-address]

database interface {ip-int-name | ip-address} [ group grp-ip-address] [source src-ip-address]

database host ip-address [group grp-ip-address] [ source src-ip-address]

database host all [group grp-ip-address] [ source src-ip-address]

database group-interface interface-name [ fwd-service service-id] [group grp-ip-address] [ source src-ip-address]

database group-interface all

Context

[Tree] (clear>router>igmp database)

Full Context

clear router igmp database

Description

This command clears IGMP or PIM database statistics on a specified interface or IP address.

Parameters

group grp-ip-address

Clears the multicast group address (IPv4/IPv6) or zero in the specified address group.

source src-ip-address

Clears the IGMP database from the specified source IP address.

interface ip-int-name

Clears the IGMP database on the specified interface.

interface ip-address

Clears the IGMP database on the specified IP address.

host ip-address

Clears the IGMP database on the specified host.

host all

Clears the IGMP database on all hosts.

group-interface interface-name

Clears the IGMP database on the specified group interface.

group-interface all

Clears the IGMP database on all group interfaces.

Platforms

All

database

Syntax

database [group ipv6-address [source ipv6-address]]

database interface {ip-int-name | ipv6-address]} [ group ipv6-address [source ipv6-address]]

database ipsec-interface ip-int-name [group ipv6-address [source ipv6-address]]

database host ipv6-address [group ipv6-address [ source ipv6-address]]

database host all [group ipv6-address [source ipv6-address]]

database group-interface interface-name [ fwd-service service-id] [group grp-ipv6-address [source ipv6-address]]

database group-interface all

Context

[Tree] (clear>router>mld database)

Full Context

clear router mld database

Description

This command clears MLD database parameters.

Parameters

host ipv6-address

Clears the MLD database on the specified host.

host all

Clears the MLD database on all hosts.

interface ip-int-name

Clears database information for the specified MLD interface name.

interface ipv6-address

Clears database information for the specified MLD interface IPv6 address.

ipsec-interface ip-int-name

Clears database information for the specified dynamic name for the MLD-enabled child_SA.

group ipv6-address

Clears database information for the specified MLD group IPv6 address.

source ipv6-address

Clears database information for the specified MLD source IPv6 address.

service-id

Clears database information for the specified service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

Platforms

All

database

Syntax

database [interface ip-int-name | mt-int-name | int-ip-address] [group grp-ip-address [source ip-address]] [family]

Context

[Tree] (clear>router>pim database)

Full Context

clear router pim database

Description

This command clears IGMP or PIM database statistics on a specified interface or IP address.

Parameters

ip-int-name

Clears the IGMP or PIM database on the specified interface.

mt-int-name

Clears the default core group address of the Multicast Distribution Tree (MDT) for the VPRN instance. The Multicast Tunnel (MT) interface for a VPRN is created when this object is set to a valid group address.

Syntax: vprn-id-mt-grp-ip-address

int-ip-address

Clears the IGMP or PIM database on the specified IP address.

group-ip-address

Clears the multicast group address (ipv4, ipv6) or zero in the specified address group.

ip-address

Clears the IGMP or PIM database from the specified source IP address.

family

Clears database family information.

Values

ipv4, ipv6

mpls-if-name

Clears the MPLS interface name.

Syntax: mpls-if-index

Platforms

All

database

Syntax

database

Context

[Tree] (show>router>p2mp-sr-tree database)

Full Context

show router p2mp-sr-tree database

Description

Commands in this context display P2MP SR tree database information.

Platforms

All

database

Syntax

database [family] [ip-prefix/ip-prefix-length] [up to prefix-length] [origin-as as-number]

database [family] [ip-prefix/ip-prefix-length] {longer}

database {summary}

database [family] [{static}

Context

[Tree] (show>router>origin-validation database)

Full Context

show router origin-validation database

Description

This command displays database information.

Parameters

family

Specifies the type of routing information to be displayed.

Values

ipv4 — Displays IPv4 entries.

ipv6 — Displays IPv6 entries.

ip-prefix/ip-prefix-length

Displays routes only matching the specified IP address and length, up to 64 characters.

prefix-length

Displays routes matching up to the specified length.

Values

1 to 128

as-number

Specifies the origin AS number.

Values

0 to 4294967295

longer

Displays routes matching the ip-prefix-/ip-prefix-length and routes with longer masks.

summary

Displays database summary information.

static

Displays static routes.

Platforms

All

Output

The following output is an example of database information.

Output Example
A:Dut-C# show router origin-validation database
===============================================================================
Static and Dynamic VRP Database Entries
===============================================================================
Prefix Range [Flags]                                            Origin AS
   Session IP [Flags]
-------------------------------------------------------------------------------
10.0.0.0/16-24 [Static-V]                                       65001
    - 
10.16.0.0/12-12 [Dynamic]                                       65002
    10.168.1.1 [B]
-------------------------------------------------------------------------------
No. of VRP Database Entries: 2
-------------------------------------------------------------------------------
Flags: B = Base instance session
       M = Management instance session
       Static-V = Static-Valid; Static-I = Static-Invalid 
===============================================================================
A:Dut-C# show router origin-validation database summary 
===============================================================================
Static and Dynamic VRP Database Summary
===============================================================================
Type                                    IPv4 Entries         IPv6 Entries
-------------------------------------------------------------------------------
10.168.1.1 [B]                          1                   0
RPKI Server #1
Static                                  1                   0
==============================================================================

database

Syntax

database [system-id | lsp-id] [detail] [ level level]

Context

[Tree] (show>router>isis database)

Full Context

show router isis database

Description

This command displays the entries in the IS-IS link state database.

Parameters

system-id

Only the LSPs related to the specified system-id are listed. If no system-id or lsp-id are specified, all database entries are listed.

lsp-id

Only the specified LSP (hostname) is listed. If no system-id or lsp-id are specified, all database entries are listed.

level

Specifies the interface level (1, 2, or 1 and 2).

detail

All output is displayed in the detailed format.

Platforms

All

Output

The following output is an example of the IS-IS link state database information, and IS-IS Link State Database Output Fields describes the output fields.

Output Example
*A:Dut-B# show router isis 0 database
===============================================================================
Rtr Base ISIS Instance 0 Database
===============================================================================
LSP ID                                  Sequence  Checksum Lifetime Attributes
-------------------------------------------------------------------------------
Displaying Level 1 database
-------------------------------------------------------------------------------
Dut-B.00-00                             0x495     0x614e   711      L1L2
Dut-D.00-00                             0x13b     0x1917   831      L1
Level (1) LSP Count : 2
Displaying Level 2 database
-------------------------------------------------------------------------------
Dut-A.00-00                             0x4a6     0x214f   804      L1L2
Dut-B.00-00                             0x4b7     0xe654   898      L1L2
Dut-C.00-00                             0x4b2     0xa4f1   1166     L1L2
Level (2) LSP Count : 3
===============================================================================
*A:Dut-B#
*A:Dut-B#
*A:Dut-B# show router isis 0 database detail
===============================================================================
Rtr Base ISIS Instance 0 Database (detail)
===============================================================================
Displaying Level 1 database
-------------------------------------------------------------------------------
LSP ID    : Dut-B.00-00                                 Level     : L1
Sequence  : 0x495                  Checksum  : 0x614e   Lifetime  : 706
Version   : 1                      Pkt Type  : 18       Pkt Ver   : 1
Attributes: L1L2                   Max Area  : 3        Alloc Len : 1492
SYS ID    : 4900.0000.0002         SysID Len : 6        Used Len  : 179
TLVs :
  Area Addresses:
    Area Address : (3) 49.0001
  Supp Protocols:
    Protocols     : IPv4
  IS-Hostname   : Dut-B
  Router ID   :
    Router ID   : 10.20.1.2
  Router Cap : 10.20.1.2, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 100
        Flags: M
  I/F Addresses :
    I/F Address   : 10.20.1.2
    I/F Address   : 10.10.10.13
  TE IS Nbrs   :
    Nbr   : Dut-D.00
    Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.13
    Nbr IP    : 10.10.10.14
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524285
  TE IP Reach   :
    Default Metric  : 0
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.2
    Sub TLV   :
      Prefix-SID Index:2, Algo:0, Flags:NnP
      Prefix-SID Index:12, Algo:128, Flags:NnP
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.12
-------------------------------------------------------------------------------
LSP ID    : Dut-D.00-00                                 Level     : L1
Sequence  : 0x13b                  Checksum  : 0x1917   Lifetime  : 827
Version   : 1                      Pkt Type  : 18       Pkt Ver   : 1
Attributes: L1                     Max Area  : 3        Alloc Len : 179
SYS ID    : 4900.0000.0004         SysID Len : 6        Used Len  : 179
TLVs :
  Area Addresses:
    Area Address : (3) 49.0001
  Supp Protocols:
    Protocols     : IPv4
  IS-Hostname   : Dut-D
  Router ID   :
    Router ID   : 10.20.1.4
  Router Cap : 10.20.1.4, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 50
        Flags: M
  I/F Addresses :
    I/F Address   : 10.20.1.4
    I/F Address   : 10.10.10.14
  TE IS Nbrs   :
    Nbr   : Dut-B.00
    Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.14
    Nbr IP    : 10.10.10.13
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524287
  TE IP Reach   :
    Default Metric  : 0
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.4
    Sub TLV   :
      Prefix-SID Index:4, Algo:0, Flags:NnP
      Prefix-SID Index:14, Algo:128, Flags:NnP
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.12
Level (1) LSP Count : 2
Displaying Level 2 database
-------------------------------------------------------------------------------
LSP ID    : Dut-A.00-00                                 Level     : L2
Sequence  : 0x4a6                  Checksum  : 0x214f   Lifetime  : 798
Version   : 1                      Pkt Type  : 20       Pkt Ver   : 1
Attributes: L1L2                   Max Area  : 3        Alloc Len : 220
SYS ID    : 4900.0000.0001         SysID Len : 6        Used Len  : 220
TLVs :
  Area Addresses:
    Area Address : (3) 49.0001
  Supp Protocols:
    Protocols     : IPv4
  IS-Hostname   : Dut-A
  Router ID   :
    Router ID   : 10.20.1.1
  Router Cap : 10.20.1.1, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
  I/F Addresses :
    I/F Address   : 10.20.1.1
    I/F Address   : 10.10.10.1
    I/F Address   : 10.10.10.5
  TE IS Nbrs   :
    Nbr   : Dut-C.00
    Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.5
    Nbr IP    : 10.10.10.6
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524286
  TE IS Nbrs   :
    Nbr   : Dut-B.00
    Default Metric  : 10
    Sub TLV Len     : 24
    IF Addr   : 10.10.10.1
    Nbr IP    : 10.10.10.2
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
    Adj-SID: Flags:v4VL Weight:0 Label:524285
  TE IP Reach   :
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.0
    Default Metric  : 0
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.1
    Sub TLV   :
      Prefix-SID Index:1, Algo:0, Flags:NnP
      Prefix-SID Index:11, Algo:128, Flags:NnP
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.4
-------------------------------------------------------------------------------
LSP ID    : Dut-B.00-00                                 Level     : L2
Sequence  : 0x4b7                  Checksum  : 0xe654   Lifetime  : 891
Version   : 1                      Pkt Type  : 20       Pkt Ver   : 1
Attributes: L1L2                   Max Area  : 3        Alloc Len : 1492
SYS ID    : 4900.0000.0002         SysID Len : 6        Used Len  : 271
TLVs :
  Area Addresses:
    Area Address : (3) 49.0001
  Supp Protocols:
    Protocols     : IPv4
  IS-Hostname   : Dut-B
  Router ID   :
    Router ID   : 10.20.1.2
  Router Cap : 10.20.1.2, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 100
        Flags: M
  I/F Addresses :
    I/F Address   : 10.20.1.2
    I/F Address   : 10.10.10.2
    I/F Address   : 10.10.10.9
  TE IS Nbrs   :
    Nbr   : Dut-C.00
    Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.9
    Nbr IP    : 10.10.10.10
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524286
  TE IS Nbrs   :
    Nbr   : Dut-A.00
    Default Metric  : 10
    Sub TLV Len     : 24
    IF Addr   : 10.10.10.2
    Nbr IP    : 10.10.10.1
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
    Adj-SID: Flags:v4VL Weight:0 Label:524284
  TE IP Reach   :
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.0
    Default Metric  : 0
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.2
    Sub TLV   :
      Prefix-SID Index:2, Algo:0, Flags:NnP
      Prefix-SID Index:12, Algo:128, Flags:NnP
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.8
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.12
    Default Metric  : 10
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.4
    Sub TLV   :
      Prefix-SID Index:4, Algo:0, Flags:RNnP
      Prefix-SID Index:14, Algo:128, Flags:RNnP
      Prefix-Metric-FlexAlg Algo:128, Metric:100
-------------------------------------------------------------------------------
LSP ID    : Dut-C.00-00                                 Level     : L2
Sequence  : 0x4b2                  Checksum  : 0xa4f1   Lifetime  : 1158
Version   : 1                      Pkt Type  : 20       Pkt Ver   : 1
Attributes: L1L2                   Max Area  : 3        Alloc Len : 226
SYS ID    : 4900.0000.0003         SysID Len : 6        Used Len  : 226
TLVs :
  Area Addresses:
    Area Address : (3) 49.0001
  Supp Protocols:
    Protocols     : IPv4
  IS-Hostname   : Dut-C
  Router ID   :
    Router ID   : 10.20.1.3
  Router Cap : 10.20.1.3, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
  I/F Addresses :
    I/F Address   : 10.20.1.3
    I/F Address   : 10.10.10.6
    I/F Address   : 10.10.10.10
  TE IS Nbrs   :
    Nbr   : Dut-A.00
Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.6
    Nbr IP    : 10.10.10.5
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524287
  TE IS Nbrs   :
    Nbr   : Dut-B.00
    Default Metric  : 10
    Sub TLV Len     : 30
    IF Addr   : 10.10.10.10
    Nbr IP    : 10.10.10.9
    TE APP LINK ATTR    :
      SABML-flag:Non-Legacy SABM-flags:   X
        Delay     : 100
    Adj-SID: Flags:v4VL Weight:0 Label:524286
  TE IP Reach   :
    Default Metric  : 0
    Control Info:   S, prefLen 32
    Prefix   : 10.20.1.3
    Sub TLV   :
      Prefix-SID Index:3, Algo:0, Flags:NnP
      Prefix-SID Index:13, Algo:128, Flags:NnP
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.4
    Default Metric  : 10
    Control Info:    , prefLen 30
    Prefix   : 10.10.10.8
Level (2) LSP Count : 3
-------------------------------------------------------------------------------
Control Info     : D = Prefix Leaked Down
                   S = Sub-TLVs Present
Attribute Flags  : N = Node Flag
                   R = Re-advertisement Flag
                   X = External Prefix Flag
                   E = Entropy Label Capability (ELC) Flag
Adj-SID Flags    : v4/v6 = IPv4 or IPv6 Address-Family
                   B = Backup Flag
                   V = Adj-SID carries a value
                   L = value/index has local significance
                   S = Set of Adjacencies
                   P = Persistently allocated
Prefix-SID Flags : R = Re-advertisement Flag
                   N = Node-SID Flag
                   nP = no penultimate hop POP
                   E = Explicit-Null Flag
                   V = Prefix-SID carries a value
                   L = value/index has local significance
Lbl-Binding Flags: v4/v6 = IPv4 or IPv6 Address-Family
                   M = Mirror Context Flag
                   S = SID/Label Binding flooding
                   D = Prefix Leaked Down
                   A = Attached Flag
SABM-flags Flags:  R = RSVP-TE
                   S = SR-TE
                   F = LFA
                   X = FLEX-ALGO
FAD-flags Flags:   M = Prefix Metric
===============================================================================
*A:Dut-B#
Table 5. IS-IS Link State Database Output Fields

Label

Description

Flex-Algorithm

The flexible algorithm number

Priority

Displays the FAD priority; It is the tiebreaker when multiple FADs are received

Metric Type

The metric used by the winning FAD

igp — the IGP metric is used

te-metric — the TE metric is used

delay — the delay metric is used

Calculation Type

Displays the calculation type; for SPF a zero value is only defined

Prefix SID Flags

Displays the prefix SID flags

Fad Flags

Displays the FAD Flags; the M-flag is used for inter-area; when set, the metric must be used for inter-area traffic to avoid loops and blackhole traffic on ABR/ASBR

database

Syntax

database [system-id]

Context

[Tree] (clear>router>isis database)

Full Context

clear router isis database

Description

This command removes the entries from the IS-IS link-state database which contains information about PDUs.

Parameters

system-id

When the system ID is entered, only the specified entries are removed from the IS-IS link-state database.

Platforms

All

database

Syntax

database [type {router | network | summary | asbr-summary | external | nssa | all}] [area area-id] [ adv-router router-id] [link-state-id] [detail] [filtered]

database [type {router | network | inter-area-pfx | inter-area-rtr | external | nssa | intra-area-pfx | rtr-info | all}] [area area-id] [adv-router router-id] [link-state-id] [ detail] [filtered]

Context

[Tree] (show>router>ospf3 database)

[Tree] (show>router>ospf database)

Full Context

show router ospf3 database

show router ospf database

Description

This command displays information about the OSPF link state database (LSDB).

When no command line options are specified, the command displays brief output for all database entries.

Parameters

type keyword

Specifies to filter the OSPF LSDB information based on the type specified by keyword.

router

Displays only router (Type 1) LSAs in the LSDB.

network

Displays only network (Type 2) LSAs in the LSDB.

summary

Displays only summary (Type 3) LSAs in the LSDB.

asbr-summary

Displays only ASBR summary (Type 4) LSAs in the LSDB.

external

Displays only AS external (Type 5) LSAs in the LSDB. External LSAs are maintained globally and not per area. If the display of external links is requested, the area parameter, if present, is ignored.

nssa

Displays only NSSA area-specific AS external (Type 7) LSAs in the LSDB.

inter-area-pfx

Displays inter-area prefix LSAs.

inter-area-rtr

Displays inter-area router LSAs.

intra-area-pfx

Displays intra-area prefix LSAs.

rtr-info

Displays router info LSAs.

all

Displays all LSAs in the LSDB. The all keyword is intended to be used with either the area area-id or the adv-router router-id [link-state-id] parameters.

area area-id

Displays LSDB information associated with the specified OSPF area-id.

Values

ip-address — a.b.c.d

area — 0 to 4294967295

adv-router router-id [link-state-id]

Displays LSDB information associated with the specified advertising router. To further narrow the number of items displayed, the link-state-id can optionally be specified.

detail

Displays detailed information on the LSDB entries.

filtered

Displays LSDB entries that were filtered by an area import or export policy.

Platforms

All

Output

OSPF Database Output

OSPF Database Output Fields describes the standard and detailed command output fields for an OSPF database.

Table 6. OSPF Database Output Fields

Label

Description

Area Id

The OSPF area identifier.

Type

LSA Type

Router — LSA type of router (OSPF)

Network — LSA type of network (OSPF)

Summary — LSA type of summary (OSPF)

ASBR Summary — LSA type of ASBR summary (OSPF)

Nssa-ext — LSA area-specific, NSSA external (OSPF)

Area opaque — LSA type of area opaque (OSPF)

router — LSA type of router (OSPF3)

Network — LSA type of network (OSPF3)

IE Pfx — LSA type of inter-area prefix (OSPF3) Newline IE Rtr

LSA type of inter-area router (OSPF3)

IA Pfx — LSA type of intra-area prefix (OSPF3)

Link State Id

The link state Id is an LSA type specific field containing either a number to distinguish several LSAs from the same router, an interface ID, or a router-id; it identifies the piece of the routing domain being described by the advertisement.

Adv Rtr Id

Adv Router Id

The router identifier of the router advertising the LSA.

Age

The age of the link state advertisement in seconds.

Sequence

Sequence No

The signed 32-bit integer sequence number.

Cksum

Checksum

The 32-bit unsigned sum of the link-state advertisements' LS checksums.

No. of LSAs

The number of LSAs displayed.

Options

EA — External Attribute LSA Support

DC — Demand Circuit Support

R — If clear, a node can participate in OSPF topology distribution without being used to forward transit traffic.

N — Type 7 LSA Support

MC — Multicast Support

E — External Routes Support

V6 — V6 works in conjunction with R. If V6 is clear, a node can participate in OSPF topology distribution without being used to forward IPv6 datagrams. If R is set and V6 is clear, IPv6 datagrams are not forwarded but diagrams belonging to another protocol family may be forwarded.

Prefix Options

P — Propagate NSSA LSA.

MC — Multicast support.

LA — Local address capability. If set, the prefix is an IPv6 interface address of the advertising router.

NU — No unicast capability. If set, the prefix is excluded from IPv6 unicast calculations.

Flags

None — No flags set

V — The router is an endpoint for one or more fully adjacent Virtual Links having the described area as the transit area

E — The router is an AS Boundary Router

B — The router is an Area Border Router

Link Count

The number of links advertised in the LSA.

Link Type (n)

The link type of the nth link in the LSA.

Network (n)

The network address of the nth link in the LSA.

Mask (n)

The mask of the nth link in the LSA.

No of TOS (n)

The ToS of the nth link in the LSA.

Metric-0 (n)

The cost metric of the nth link in the LSA.

Not Flooded (n)

Filtered on Import

The nth LSA was filtered by an area import policy.

Filtered on Export

The nth LSA was filtered by an area export policy.

Note: this line does not appear if there is no filtering and the LSA was flooded.

Output Example
A:ALA-A# show router ospf 1 database
===============================================================================
Rtr Base OSPFv2 Instance 1 Link State Database (type : All)
===============================================================================
Area Id         Type    Link State Id   Adv Rtr Id      Age  Sequence   Cksum
-------------------------------------------------------------------------------
0.0.0.0         Router  180.0.0.2       180.0.0.2       1800 0x800000b6 0xf54
0.0.0.0         Router  180.0.0.5       180.0.0.5       1902 0x8000009d 0xcb7c
0.0.0.0         Router  180.0.0.8       180.0.0.8       1815 0x8000009a 0x529b
0.0.0.0         Router  180.0.0.9       180.0.0.9       1156 0x80000085 0xd00f
0.0.0.0         Router  180.0.0.10      180.0.0.10      533  0x8000009d 0x3f1f
0.0.0.0         Router  180.0.0.11      180.0.0.11      137  0x80000086 0xc58f
0.0.0.0         Router  180.0.0.12      180.0.0.12      918  0x8000009d 0x4cf3
0.0.0.0         Router  180.0.0.13      180.0.0.13      1401 0x800000a2 0x879c
0.0.0.0         Network 180.0.53.28     180.0.0.28      149  0x80000083 0xe5cd
0.0.0.0         Network 180.0.54.28     180.0.0.28      1259 0x80000083 0xdad7
0.0.0.0         Summary 180.0.0.15      180.0.0.10      378  0x80000084 0xeba1
0.0.0.0         Summary 180.0.0.15      180.0.0.12      73   0x80000084 0xdfab
0.0.0.0         Summary 180.0.0.18      180.0.0.10      1177 0x80000083 0xcfbb
0.0.0.1         Summary 180.100.25.4    180.0.0.12      208  0x80000091 0x3049
0.0.0.1         AS Summ 180.0.0.8       180.0.0.10      824  0x80000084 0x3d07
0.0.0.1         AS Summ 180.0.0.8       180.0.0.12      1183 0x80000095 0x4bdf
0.0.0.1         AS Summ 180.0.0.9       180.0.0.10      244  0x80000082 0x73cb
n/a             AS Ext  7.1.0.0         180.0.0.23      1312 0x80000083 0x45e7
n/a             AS Ext  7.2.0.0         180.0.0.23      997  0x80000082 0x45e6
n/a             AS Ext  10.20.0.0       180.0.0.23      238  0x80000081 0x2d81
...
-------------------------------------------------------------------------------
No. of LSAs: 339
===============================================================================

A:ALA-A# show router ospf 1 database detail
===============================================================================
Rtr Base OSPFv2 Instance 1 Link State Database (type : All) (detail)
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.0
-------------------------------------------------------------------------------
Area Id          : 0.0.0.0              Adv Router Id    : 10.10.10.10
Link State Id    : 10.10.10.10 (168430090)
LSA Type         : Router
Sequence No      : 0x80000002           Checksum         : 0xd81
Age              : 594                  Length           : 36
Options          : E 
Flags            : None                 Link Count       : 1
Link Type (1)    : Stub Network
Network (1)      : 192.168.0.0          Mask (1)         : 255.255.255.0
No of TOS (1)    : 0                    Metric-0 (1)     : 10
-------------------------------------------------------------------------------
AS Ext LSA for Network 180.0.0.14
-------------------------------------------------------------------------------
Area Id          : N/A                  Adv Router Id    : 180.0.0.10
Link State Id    : 180.0.0.14           LSA Type         : AS Ext
Sequence No      : 0x80000083           Checksum         : 0xa659
Age              : 2033                 Length           : 36
Options          : E
Network Mask     : 255.255.255.255      Fwding Address   : 180.1.6.15
Metric Type      : Type 2               Metric-0         : 4
Ext Route Tag    : 0
-------------------------------------------------------------------------------

A:ALA-A# show router ospf database filtered
===============================================================================
Rtr Base OSPFv2 Instance 0 Link State Database (filtered)
===============================================================================
Type    Area Id         Link State Id   Adv Rtr Id      Filter
Router  0.0.0.0         10.0.0.2        10.0.0.2 
-------------------------------------------------------------------------------
Router  0.0.0.0         10.0.0.2        10.0.0.2 
Summary 0.0.0.0         1.2.3.0         10.0.0.2
Summary 0.0.0.0         10.0.0.1        10.0.0.2        Export 0.0.0.1
AS Summ 0.0.0.0         10.0.0.1        10.0.0.2
Router  0.0.0.1         10.0.0.1        10.0.0.1 
Router  0.0.0.1         10.0.0.2        10.0.0.2 
Network 0.0.0.1         1.1.2.2         10.0.0.2
Summary 0.0.0.1         1.2.3.0         10.0.0.2        Import 0.0.0.1
Summary 0.0.0.1         1.2.4.0         10.0.0.2        Import 0.0.0.1
Summary 0.0.0.1         1.4.6.0         10.0.0.2        Import 0.0.0.1
Summary 0.0.0.1         1.5.6.0         10.0.0.2        Import 0.0.0.1
Summary 0.0.0.2         1.5.6.0         10.0.0.2
Summary 0.0.0.2         10.0.0.1        10.0.0.2        Export 0.0.0.1
Summary 0.0.0.2         10.0.6.0        10.0.0.2
-------------------------------------------------------------------------------
No. of LSAs: 14
No. of Export Filtered LSAs: 2
No. of Import Filtered LSAs: 4
===============================================================================
A:ALA-A#
*A:Dut-C>config>router>ospf3# show router ospf3 0 database detail adv-router 10.20.1.3 
===============================================================================
Rtr Base OSPFv3 Instance 0 Link State Database (type: All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.0 (0)
LSA Type         : Router               
Sequence No      : 0x80000002           Checksum         : 0x8749
Age              : 343                  Length           : 56
Options          : ----R--EV6           
Flags            : ASBR                 Link Count       : 2
Link Type (1)    : P2P Link             Nbr Rtr ID (1)   : 10.20.1.1
I/F Index (1)    : 2                    Nbr I/F Index (1): 3
Metric (1)       : 100                  
Link Type (2)    : P2P Link             Nbr Rtr ID (2)   : 10.20.1.6
I/F Index (2)    : 3                    Nbr I/F Index (2): 4
Metric (2)       : 100                  
-------------------------------------------------------------------------------
IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.0 (0)
LSA Type         : IA Pfx               
Sequence No      : 0x80000004           Checksum         : 0x285a
Age              : 303                  Length           : 192
Ref Ls Type      : 2001                 Ref Ls Id        : 0
Ref Adv Rtr      : 10.20.1.3            No of Pfxs       : 8
Prefix (1)       : 3ffe::a14:103/128
Pfx Options (1)  : LA                   Metric (1)       : 0
Prefix (2)       : 3ffe::3300:d00/120
Pfx Options (2)  :                      Metric (2)       : 100
Prefix (3)       : 3ffe::100:d00/120
Pfx Options (3)  :                      Metric (3)       : 100
Prefix (4)       : 3ffe::3300:2400/120
Pfx Options (4)  :                      Metric (4)       : 100
Prefix (5)       : 3ffe::100:2400/120
Pfx Options (5)  :                      Metric (5)       : 100
Prefix (6)       : 3ffe::100:900/120
Pfx Options (6)  :                      Metric (6)       : 200
Prefix (7)       : 3ffe::3300:2103/128
Pfx Options (7)  : LA                   Metric (7)       : 0
Prefix (8)       : 3ffe::100:2103/128
Pfx Options (8)  : LA                   Metric (8)       : 0
-------------------------------------------------------------------------------
Rtr Inf LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.0 (0)
LSA Type         : Rtr Inf              
Sequence No      : 0x80000002           Checksum         : 0x783a
Age              : 343                  Length           : 68
TLV dump:
    Capabilities (1) Len 4 :
        0x28000000
    SR algorithm (8) Len 2 :
        0x2         0x0     
    SR label range (9) Len 12 :
        Range-size=1000
        Sub-TLV SID/label(7) len 3 :
            label=40000
    SR Readable label depth capability: 15
    non-OSPF Func Capabilities (32768) Len 4 :
        0x80000000
-------------------------------------------------------------------------------
E-Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.0 (0)
LSA Type         : E-Router             
Sequence No      : 0x80000004           Checksum         : 0x44a8
Age              : 303                  Length           : 88
Options          : ----R--EV6           
Flags            : ASBR                 Link Count       : 2
Link Type (1)    : P2P Link             Nbr Rtr ID (1)   : 10.20.1.1
I/F Index (1)    : 2                    Nbr I/F Index (1): 3
Metric (1)       : 100                  
Adj SID (1)      : 524287               Flags (1)        : BVL--
                                        Weight (1)       : 0
Link Type (2)    : P2P Link             Nbr Rtr ID (2)   : 10.20.1.6
I/F Index (2)    : 3                    Nbr I/F Index (2): 4
Metric (2)       : 100                  
Adj SID (2)      : 524286               Flags (2)        : BVL--
                                        Weight (2)       : 0
-------------------------------------------------------------------------------
E-IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.0 (0)
LSA Type         : E-IA Pfx             
Sequence No      : 0x80000004           Checksum         : 0xb319
Age              : 304                  Length           : 140
Ref Ls Type      : a021                 Ref Ls Id        : 0
Ref Adv Rtr      : 10.20.1.3            No of Pfxs       : 3
Prefix (1)       : 3ffe::a14:103/128
Pfx Options (1)  : N LA                 Metric (1)       : 0
Prefix SID (1)   : 6                    Flags (1)        : NP-----
                                        Algorithm (1)    : 0
Prefix (2)       : 3ffe::3300:2103/128
Pfx Options (2)  : N LA                 Metric (2)       : 0
Prefix (3)       : 3ffe::100:2103/128
Pfx Options (3)  : N LA                 Metric (3)       : 0
Prefix SID (3)   : 0                    Flags (3)        : NP-----
                                        Algorithm (3)    : 0
-------------------------------------------------------------------------------
AS Ext LSA (0.0.0.2 (2))
-------------------------------------------------------------------------------
Area Id          : N/A                  Adv Router Id    : 10.20.1.3
Link State Id    : 0.0.0.2 (2)
LSA Type         : AS Ext               
Sequence No      : 0x80000001           Checksum         : 0x4775
Age              : 348                  Length           : 44
Options          : E                    
Pfx Options      :                      E2-Metric        : 1
Dest Prefix      : 3ffe::6700:1/128
=============================================================================== 
*A:Dut-C>config>router>ospf3# show router ospf3 0 database detail adv-router 10.20.1.6
===============================================================================
Rtr Base OSPFv3 Instance 0 Link State Database (type: All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.0 (0)
LSA Type         : Router               
Sequence No      : 0x80000002           Checksum         : 0x2aa3
Age              : 328                  Length           : 56
Options          : ----R--EV6           
Flags            : ABR ASBR             Link Count       : 2
Link Type (1)    : P2P Link             Nbr Rtr ID (1)   : 10.20.1.2
I/F Index (1)    : 2                    Nbr I/F Index (1): 4
Metric (1)       : 100                  
Link Type (2)    : P2P Link             Nbr Rtr ID (2)   : 10.20.1.3
I/F Index (2)    : 4                    Nbr I/F Index (2): 3
Metric (2)       : 100                  
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.1 (1)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x45df
Age              : 335                  Length           : 44
Pfx Options      :                      Metric           : 0
Dest Prefix      : 3ffe::a14:106/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1           
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.3 (3)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xb9b
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::100:3705/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.4 (4)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x83ef
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::3300:3705/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.5 (5)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x5d60
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::a14:105/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.6 (6)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x1932
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::100:2c04/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1           
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.8 (8)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x878f
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::3300:2c04/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.9 (9)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x75e0
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::a14:104/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.10 (10)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xdcde
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::a14:102/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.12 (12)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xc86a
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::3300:1800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1           
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.13 (13)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x3c28
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::100:1800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.14 (14)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x8c07
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::3300:1a00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.15 (15)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xffc4
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::100:1a00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.16 (16)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xaf6a
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::3300:2d00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1           
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.17 (17)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x2328
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 200
Dest Prefix      : 3ffe::100:2d00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.18 (18)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0x551c
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::3300:3800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.19 (19)
LSA Type         : IE Pfx               
Sequence No      : 0x80000001           Checksum         : 0xc8d9
Age              : 328                  Length           : 44
Pfx Options      :                      Metric           : 100
Dest Prefix      : 3ffe::100:3800/120
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 10.20.1.2 (169083138)
LSA Type         : IE Rtr               
Sequence No      : 0x80000001           Checksum         : 0xcf8b
Age              : 328                  Length           : 32
Options          : ----R--EV6           Metric           : 100
ASB Rtr Id       : 10.20.1.2            
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 10.20.1.4 (169083140)
LSA Type         : IE Rtr               
Sequence No      : 0x80000001           Checksum         : 0xc32f
Age              : 328                  Length           : 32
Options          : ----R--EV6           Metric           : 200
ASB Rtr Id       : 10.20.1.4            
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1           
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 10.20.1.5 (169083141)
LSA Type         : IE Rtr               
Sequence No      : 0x80000001           Checksum         : 0xdb79
Age              : 328                  Length           : 32
Options          : ----R--EV6           Metric           : 100
ASB Rtr Id       : 10.20.1.5            
-------------------------------------------------------------------------------
IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.0 (0)
LSA Type         : IA Pfx               
Sequence No      : 0x80000003           Checksum         : 0xb8c1
Age              : 293                  Length           : 112
Ref Ls Type      : 2001                 Ref Ls Id        : 0
Ref Adv Rtr      : 10.20.1.6            No of Pfxs       : 4
Prefix (1)       : 3ffe::3300:2400/120
Pfx Options (1)  :                      Metric (1)       : 100
Prefix (2)       : 3ffe::100:2400/120
Pfx Options (2)  :                      Metric (2)       : 100
Prefix (3)       : 3ffe::3300:4206/128
Pfx Options (3)  : LA                   Metric (3)       : 0
Prefix (4)       : 3ffe::100:4206/128
Pfx Options (4)  : LA                   Metric (4)       : 0
-------------------------------------------------------------------------------
Rtr Inf LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.0 (0)
LSA Type         : Rtr Inf              
Sequence No      : 0x80000002           Checksum         : 0x4abf
Age              : 329                  Length           : 68
TLV dump:
    Capabilities (1) Len 4 :
        0x28000000
    SR algorithm (8) Len 2 :
        0x2         0x0     
    SR label range (9) Len 12 :
        Range-size=1000
        Sub-TLV SID/label(7) len 3 :
            label=70000
    SR Readable label depth capability: 15
    non-OSPF Func Capabilities (32768) Len 4 :
        0x80000000
-------------------------------------------------------------------------------
E-Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.0 (0)
LSA Type         : E-Router             
Sequence No      : 0x80000003           Checksum         : 0xdf0f
Age              : 293                  Length           : 88
Options          : ----R--EV6           
Flags            : ABR ASBR             Link Count       : 2
Link Type (1)    : P2P Link             Nbr Rtr ID (1)   : 10.20.1.2
I/F Index (1)    : 2                    Nbr I/F Index (1): 4
Metric (1)       : 100                  
Adj SID (1)      : 524285               Flags (1)        : BVL--
                                        Weight (1)       : 0
Link Type (2)    : P2P Link             Nbr Rtr ID (2)   : 10.20.1.3
I/F Index (2)    : 4                    Nbr I/F Index (2): 3
Metric (2)       : 100                  
Adj SID (2)      : 524284               Flags (2)        : BVL--
                                        Weight (2)       : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.2 (2)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0xf5de
Age              : 334                  Length           : 60
Pfx Options      : N LA                 Metric           : 0
Dest Prefix      : 3ffe::a14:106/128
Prefix SID       : 9                    Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.7 (7)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0xb351
Age              : 328                  Length           : 60
Pfx Options      : N                    Metric           : 200
Dest Prefix      : 3ffe::100:2c04/128
Prefix SID       : 1                    Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.11 (11)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0x4b20
Age              : 328                  Length           : 60
Pfx Options      : N                    Metric           : 100
Dest Prefix      : 3ffe::a14:102/128  
Prefix SID       : 11                   Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.20 (20)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0xcd81
Age              : 328                  Length           : 60
Pfx Options      : N                    Metric           : 100
Dest Prefix      : 3ffe::100:3705/128
Prefix SID       : 2                    Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.21 (21)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0xc29e
Age              : 328                  Length           : 60
Pfx Options      : N                    Metric           : 100
Dest Prefix      : 3ffe::a14:105/128
Prefix SID       : 8                    Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.22 (22)
LSA Type         : E-IE Pfx             
Sequence No      : 0x80000001           Checksum         : 0x5ca1
Age              : 328                  Length           : 60
Pfx Options      : N                    Metric           : 200
Dest Prefix      : 3ffe::a14:104/128
Prefix SID       : 7                    Flags            : NP-----
                                        Algorithm        : 0
-------------------------------------------------------------------------------
E-IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id          : 0.0.0.1              Adv Router Id    : 10.20.1.6
Link State Id    : 0.0.0.0 (0)
LSA Type         : E-IA Pfx             
Sequence No      : 0x80000002           Checksum         : 0x54d0
Age              : 293                  Length           : 100
Ref Ls Type      : a021                 Ref Ls Id        : 0
Ref Adv Rtr      : 10.20.1.6            No of Pfxs       : 2
Prefix (1)       : 3ffe::3300:4206/128
Pfx Options (1)  : N LA                 Metric (1)       : 0
Prefix (2)       : 3ffe::100:4206/128
Pfx Options (2)  : N LA                 Metric (2)       : 0
Prefix SID (2)   : 3                    Flags (2)        : NP-----
                                        Algorithm (2)    : 0
===============================================================================

database

Syntax

database [purge]

Context

[Tree] (clear>router>ospf database)

[Tree] (clear>router>ospf3 database)

Full Context

clear router ospf database

clear router ospf3 database

Description

This command clears all LSAs received from other nodes, sets all adjacencies other than two-way to one-way, and refreshes all self-originated LSAs.

Parameters

purge

Clears all self-originated LSAs and re-originates all self-originated LSAs.

Platforms

All

database

Syntax

database [peer ipv6-address] [ detail]

database [peer ipv6-address] detail [qos]

database ipv6-address[/prefix-length] [longer] [peer ipv6-address] [detail]

database ipv6-address[/prefix-length] [ longer] [peer ipv6-address] detail [qos]

Context

[Tree] (show>router>ripng database)

Full Context

show router ripng database

Description

This command displays the routes in the RIPng database.

Parameters

ipv6-address

Specifies the RIPng IPv6 address.

Values

ipv6-address:

x:x:x:x:x:x:x:x [-interface]

x:x:x:x:x:x:d.d.d.d [-interface]

x: [0..FFFF]H

d: [0..255]D

interface — link local addresses up to 32 characters

prefix-length

The IP prefix in dotted decimal notation for the range used by the ABR to advertise that summarizes the area into another area.

Values

ipv6-prefix:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

prefix-length: 0 to 128

detail

Displays detailed information.

qos

Displays QoS information.

longer

Displays more detailed information.

Platforms

All

Output

The following outputs are examples of router RIPng database information.

Output Example
*A:Dut-C>config>router>if# show router ripng database 
=============================================================================
RIP-NG Route Database
=============================================================================
Destination                                 Interface
  Peer                                        Metric TTL Valid 
-----------------------------------------------------------------------------
3ffe::10:10:3:0/120                         one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:3:0/120                         two
  fe80::6629:ffff:fe00:0                      1      3   Yes   
3ffe::10:10:3:0/120                         three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:3:0/120                         four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        two
  fe80::6629:ffff:fe00:0                      1      3   Yes   
3ffe::10:10:12:0/120                        three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       two
  fe80::6629:ffff:fe00:0                      1      3   Yes   
3ffe::10:10:103:0/120                       three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       two
  fe80::6629:ffff:fe00:0                      1      3   Yes   
3ffe::10:10:112:0/120                       three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         four
  fe80::6629:ffff:fe00:0                      1      3   Yes   
-----------------------------------------------------------------------------
No. of Routes: 20
=============================================================================
show router ripng database [peer <ipv6-address>]

*A:Dut-C>config>router>if# show router ripng database peer fe80::6629:ffff:fe00:0 
=============================================================================
RIP-NG Route Database
=============================================================================
Destination                                 Interface
  Peer                                        Metric TTL Valid 
-----------------------------------------------------------------------------
3ffe::10:10:3:0/120                         one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:3:0/120                         two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:3:0/120                         three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:3:0/120                         four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:12:0/120                        four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:103:0/120                       four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:10:112:0/120                       four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         two
  fe80::6629:ffff:fe00:0                      1      3   Yes   
3ffe::10:20:1:2/128                         three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         four
  fe80::6629:ffff:fe00:0                      1      4   Yes   
-----------------------------------------------------------------------------
No. of Routes: 20
=============================================================================
show router ripng database [peer <ipv6-address>] detail 

*A:DutC>config>router>if# show router ripng database peer fe80::6629:ffff:fe00:0 detail
===============================================================================
RIP-NG Route Database (Detail)
===============================================================================
Destination  : 3ffe::10:10:3:0/120              Metric       : 1
Interface    : one                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:3:0/120              Metric       : 1
Interface    : two                              TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:3:0/120              Metric       : 1
Interface    : three                            TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:3:0/120              Metric       : 1
Interface    : four                             TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:12:0/120             Metric       : 1
Interface    : one                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:12:0/120             Metric       : 1
Interface    : two                              TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:12:0/120             Metric       : 1
Interface    : three                            TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:12:0/120             Metric       : 1
Interface    : four                             TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:103:0/120            Metric       : 1
Interface    : one                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:103:0/120            Metric       : 1
Interface    : two                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:103:0/120            Metric       : 1
Interface    : three                            TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:103:0/120            Metric       : 1
Interface    : four                             TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:112:0/120            Metric       : 1
Interface    : one                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:112:0/120            Metric       : 1
Interface    : two                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:112:0/120            Metric       : 1
Interface    : three                            TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:10:112:0/120            Metric       : 1
Interface    : four                             TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:20:1:2/128              Metric       : 1
Interface    : one                              TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:20:1:2/128              Metric       : 1
Interface    : two                              TTL          : 3
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:20:1:2/128              Metric       : 1
Interface    : three                            TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
Destination  : 3ffe::10:20:1:2/128              Metric       : 1
Interface    : four                             TTL          : 4
Next Hop     : ::                               Tag          : 0
Peer         : fe80::6629:ffff:fe00:0           Valid        : Yes
 
===============================================================================
show router ripng database <ipv6-address[/prefix-length]> 
*A:Dut-C>config>router>if# show router ripng database 3ffe::10:20:1:2/128 
=============================================================================
RIP-NG Route Database
=============================================================================
Destination                                 Interface
  Peer                                        Metric TTL Valid 
-----------------------------------------------------------------------------
3ffe::10:20:1:2/128                         one
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         two
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         three
  fe80::6629:ffff:fe00:0                      1      4   Yes   
3ffe::10:20:1:2/128                         four
  fe80::6629:ffff:fe00:0                      1      3   Yes   
-----------------------------------------------------------------------------
No. of Routes: 4
=============================================================================

database

Syntax

database

Context

[Tree] (clear>router>ripng database)

Full Context

clear router ripng database

Description

This command flushes all routes in the RIPng database.

Platforms

All

database

Syntax

database [bsl [256..1024]] subdomain-id [ 0..255]

Context

[Tree] (clear>router>bier database)

Full Context

clear router bier database

Description

This command clears the BIER database.

Platforms

All

database

Syntax

database [system-id]

Context

[Tree] (clear>service>id>spb database)

Full Context

clear service id spb database

Description

This command clears and resets the Shortest Path Bridging (SPB)database.

Parameters

system-id

Specifies the system ID. When the system ID is entered, only the specified entries are removed from the IS-IS adjacency database.

Values

6-octet system identifier (xxxx.xxxx.xxxx)

Platforms

All

datapath

datapath

Syntax

datapath port-id [mac mac-chip-number] [fp fp-number] [detail]

Context

[Tree] (show datapath)

Full Context

show datapath

Description

This command displays the datapath mapping for the specified card, MDA, FP, MAC, connector, and port combinations. Fully qualified port identifiers are displayed for ports when the detail or port parameters are specified.

This command is supported on FP4-based hardware only.

Parameters

port-id

Specifies the port ID.

slot

Specifies the slot number of the card in the chassis to display. The maximum slot number is platform dependent. See the Installation Guides for more information.

Values

1 to 10

mda

Specifies the MDA number in the slot to display. This is an integer value relative to the card.

Values

1 to 2

xiom

Specifies the XIOM number in the slot to display.

Values

x1

connector

Specifies the connector number to display. This is an integer value relative to the MDA.

Values

c1 to c54

port

Specifies the connector port number to display. The full port identifier is displayed. This is an integer value relative to the connector.

Values

1 to 10

fp-number

Specifies the FP number to display. This is an integer value relative to the card.

Values

1 to 8

mac-chip-number

Specifies the MAC number to display. This is an integer value relative to the MDA.

Values

1 to 12

detail

Displays the full port identifiers for all ports with configured connectors.

Platforms

All

Output

The following output is an example of the show datapath command.

Output Example:
*A:PE# show datapath 1/2/c1/1

===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1             1/2/c1/1
===============================================================================
*A:PE# show datapath 1/2 fp 1


===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1
1         2         1         1              c2
1         2         1         1              c3
1         2         1         1              c4
1         2         1         1              c5
1         2         1         1              c6
===============================================================================


*A:PE# show datapath 1/2 mac 1 detail

===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1             1/2/c1/1
1         2         1         1              c2             1/2/c2/1
1         2         1         1              c3             1/2/c3/1
1         2         1         1              c4             1/2/c4/1
1         2         1         1              c5             1/2/c5/1
1         2         1         1              c6             1/2/c6/1
===============================================================================
*A:PE#

A:Dut-F# show datapath 1 
===============================================================================
Card    [XIOM/]MDA  FP        MAC Chip Num   Connector      Port
-------------------------------------------------------------------------------
1       x1/1        1         1              c1              
1       x1/1        1         1              c2              
1       x1/1        1         1              c3              
1       x1/1        1         1              c4              
1       x1/1        1         1              c5              
1       x1/1        1         1              c6              
1       x1/1        1         2              c7              
1       x1/1        1         2              c8              
1       x1/1        1         2              c9              
1       x1/1        1         2              c10             
1       x1/1        1         2              c11 

datastore-locks

datastore-locks

Syntax

datastore-locks [detail]

Context

[Tree] (show>system>management-interface datastore-locks)

Full Context

show system management-interface datastore-locks

Description

This command displays datastore locks information.

Parameters

detail

Displays session-specific information.

Platforms

All

Output

The following output is an example of detail datastore locks information for all datastores. Datastore-locks Output Fields describes the output fields.

Output Example
[]
A:admin@node-1# show system management-interface datastore-locks detail 
===============================================================================
Session ID  Region                 Datastore                     Lock State
   Username                        Session Mode                  Idle Time
   Session Type                    From
-------------------------------------------------------------------------------
 6          configure              Candidate                     Unlocked
   admin                           Global                        0d 00:00:09
   MD-CLI (1)                      Console
-------------------------------------------------------------------------------
Number of sessions: 1
'#' indicates the current active session
'(n)' indicates the number of internal sessions
===============================================================================
Table 7. Datastore-locks Output Fields

Label

Description

Session ID

The session ID.

Region

The region or scope that the datastore belongs to.

Datastore

Datastores that can be locked. For example: Running and Candidate.

Lock State

Locked — Indicates the session is in a locked state.

Unlocked — Indicates the session is in an unlocked state.

Username

The name of the user.

Session Mode

Global — A shared session.

Exclusive — An exclusive session.

Idle Time

The idle time of the session.

Session Type

NETCONF — Indicates a NETCONF session is running.

MD-CLI — Indicates an MD-CLI session is running.

gRPC — Indicates a gRPC session is running.

SNMP — Indicates an SNMP session is running.

Classic CLI — Indicates a classic CLI session is running.

System — Indicates a system (EHS or CRON) session is running.

From

The originating IP address.

debounce

debounce

Syntax

debounce peer ip-address ring sync-tag

Context

[Tree] (clear>redundancy>multi-chassis>mcr debounce)

Full Context

clear redundancy multi-chassis mc-ring debounce

Description

This command clears multi-chassis ring operational state debounce history.

Parameters

ip-address

Clears debounce history for the specified IP address.

Values

ipv4-address: a.b.c.d

ipv6-address:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x – [0 to FFFF] H

  • d – [0 to 255] D

sync-tag

Clears debounce history for the specified sync tag.

Platforms

All

debug

debug

Syntax

debug [application]

Context

[Tree] (show debug)

Full Context

show debug

Description

This command displays set debug points.

Note:

This command is not available in the MD-CLI. Use the MD-CLI admin show configuration debug command or the info command in the debug configuration region.

Parameters

application

Display which debug points have been set.

Values

aaa, anysec, application-assurance, atm, bgp, bier, call-trace, certificate, cisco-hdlc, diameter, dynamic-services, eth-cfm, ethernet, filter, frame-relay, gtp, igmp, ip, ipsec, isis, l2tp, lag, ldp, local-dhcp-server, mcast-management, mirror, mld, mpls, msdp, mtrace, mtrace2, nat, oam, open-flow, ospf, ospf3, pcep, pcp, pim, ppp, python, radius, radius-proxy, rip, ripng, rpki, rsvp, service, snmp, srrp, subscriber-mgmt, system, upnp, vrrp, wlan-gw, wpp

Platforms

All

Output

The following shows an example of debug output.

Output Example
*A:EsrC# show debug
debug
    mirror-source 100
        subscriber "user1" ingress
        subscriber "user2" fc be h2 h1 nc egress
        subscriber "user3" ingress egress
        subscriber "user4" sap 1/1/2:1 fc af ef nc ingress
        subscriber "user5" sap 1/1/2:1 egress
        subscriber "user6" sap 1/1/2:1 fc be l2 af h2 ef nc ingress egress
        subscriber "user7" sap 1/1/2:1 ip 1.1.0.7 fc l1 h2 ingress
        subscriber "user8" sap 1/1/2:1 ip 1.1.0.8 fc af l1 h2 ef nc egress
        subscriber "user9" sap 1/1/2:1 ip 1.1.0.9 ingress egress
        subscriber "user10" sap 1/1/
2:1 mac 00:00:01:00:00:01 fc be l2 l1 h1 nc ingress
        subscriber "user11" sap 1/1/
2:1 mac 00:00:01:00:00:02 fc be l1 h2 ef h1 egress
        subscriber "user12" sap 1/1/
2:1 mac 00:00:01:00:00:03 fc be ef ingress egress
        subscriber "user13" sap 1/1/
2:1 ip 1.1.0.13 mac 00:00:01:00:00:01 fc be ef h1 ingress
        subscriber "user14" sap 1/1/2:1 ip 1.1.0.14 mac 00:00:01:00:00:02 egress
        subscriber "user15" sap 1/1/
2:1 ip 1.1.0.15 mac 00:00:01:00:00:03 fc af l1 ef nc ingress egress
        subscriber "user16" sla-profile "sla1" ingress
        subscriber "user17" sla-profile "sla2" egress
        subscriber "user18" sla-profile "sla3" fc be af h2 ingress egress
        no shutdown
    exit
exit
*A:EsrC#

*A:alu1# show debug 
debug
    mirror-source 101
        port 1/1/1 ingress
        no shutdown
    exit
    mirror-source 102
        port 1/1/3 egress
        no shutdown
    exit
exit
*A:alu1# 

debug-packet

debug-packet

Syntax

debug-packet [clear]

Context

[Tree] (tools>dump>eth-cfm debug-packet)

Full Context

tools dump eth-cfm debug-packet

Description

This command displays and optionally clears the counters representing the number of CFM PDUs that matched the debug criteria but were not passed to the debug logger. This situation is caused by a full message queue.

Parameters

clear

Clears the current counters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of CFM-PDU information.

Output Example
tools dump eth-cfm debug-packet
================================================================================
ETH-CFM Debug Logging Message Queue Statistics
================================================================================
Rx Debug Exceptions        : 0
Tx Debug Exceptions        : 0
================================================================================

declined-addresses

declined-addresses

Syntax

declined-addresses ip-address[/mask] [detail]

declined-addresses pool pool-name

Context

[Tree] (show>router>dhcp>server declined-addresses)

Full Context

show router dhcp local-dhcp-server declined-addresses

Description

This command display information about declined addresses.

Parameters

pool-name

Specifies a DHCP pool name on the router.

ip-address

Specifies the IP address of the DNS server. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

detail

Displays detailed information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of declined address information

Output Example
*A:ALA-48>show>router>dhcp>server# declined-addresses pool test
===============================================================================
Declined addresses for server test Base
===============================================================================
 Pool                              Subnet              IP Address
PPPoe User Name                  Time                MAC Address       Type
Option 82 Circuit ID
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
*A:ALA-48>show>router>dhcp>server#

Declined Address Pool Field Descriptions describes declined address pool output fields.

Table 8. Declined Address Pool Field Descriptions

Field

Description

Pool

The name of the IP address pool

Subnet

The subnet address

IP Address

The declined IP address

Time

The creation time of this entry

MAC Address

The declined MAC address

Type

The type of declined address

PPPoE User Name

The name of the PPPoE user name

Option 82 Circuit ID

The declined circuit ID from the Option 82

declined-addresses

Syntax

declined-addresses ip-address[/mask]

declined-addresses pool pool-name

Context

[Tree] (clear>router>dhcp>server declined-addresses)

Full Context

clear router dhcp local-dhcp-server declined-addresses

Description

This command clears declined DHCP addresses.

Parameters

pool-name

Clears information about the declined pool name.

ip-address[/mask]

Clears information about the declined IP address and mask.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

default-domain

default-domain

Syntax

default-domain [bridge-identifier {bridge-id | bridge-name}] [vlan vlan-id] [system-settings]

Context

[Tree] (show>eth-cfm default-domain)

Full Context

show eth-cfm default-domain

Description

This command displays per-MIP index (bridge-identifier and vlan) configuration as entered under the default-domain entries.

Parameters

bridge-id

Specifies the bridge identifier related to the MIP. This is equivalent to the service-id.

Values

1 to 2147483647

bridge-name

Specifies the name of the bridge related to the MIP, up to 64 characters.

vlan-id

Specifies the VLAN ID matching the primary VLAN, or "none” if primary-vlan-enable is not configured.

Values

1 to 4094, none

system-settings

Keyword to display the system settings.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of default domain information, and Output fields: ETH-CFM default domain describes the output fields.

Output Example

show eth-cfm default-domain
===============================================================================
Default Domain Information
===============================================================================
System Settings
MHF Creation  : none                    Level            : 0
Id Permission : none                    MIP Ltr Priority : 7
===============================================================================
BridgeName:BridgeId                           VLAN Level Creation IdPerm  LtrPr
-------------------------------------------------------------------------------
7:7                                           none defer defer    defer   defer
string-100:1000000                            10   4     default  chassis 7
string-100:1000000                            20   5     default  defer   defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
                                              none 3     explicit defer   defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
                                              600  defer defer    defer   defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
                                              601  defer defer    defer   defer
===============================================================================  
Table 9. Output fields: ETH-CFM default domain

Label

Description

BridgeName:BridgeID

The name and ID of the association service

BridgeName:BridgeID combinations that exceed the allowed column length causes the associated output to be produced on a separate line.

VLAN

The numerical value of the primary VLAN associated with the MIP, or the value none

Level

The configured level value, or defer to the value specified under the system settings for the MIP

Creation

The configured MHF creation mode, or defer to the value specified under the system settings for the MIP

IdPerm

The configured identifier that is carried in supporting ETH-CFM PDUs, or defer to the value specified under the system settings

LtrPr

The configured MIP LTR priority, or defer to the value specified under the system settings for the MIP

delay-template

delay-template

Syntax

delay-template template-name

Context

[Tree] (show>oam-pm>streaming delay-template)

Full Context

show oam-pm streaming delay-template

Description

This command displays the configuration data for one or all OAM performance monitoring delay templates.

Parameters

template-name

Displays the results for a specific delay template, up to 64 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of OAM-PM streaming delay-template summary information. Show delay-template Output Fields describes the delay template fields.

Output Example
show oam-pm streaming delay-template
-------------------------------------------------------------------------------
Streaming Delay Templates
-------------------------------------------------------------------------------
Name                                                              Admin  Tests
-------------------------------------------------------------------------------
stream-1                                                             Up      7
-------------------------------------------------------------------------------
No. of Streaming Delay Templates: 1
------------------------------------------------------------------------------- 


show oam-pm streaming delay-template "stream-1"
-------------------------------------------------------------------------------
Tmpl Name   : stream-1
Description : stream delay stats base 1
-------------------------------------------------------------------------------
Admin State      : Up
FD Average       : round-trip
IFDV Average     : round-trip
Sample Window    : 10 seconds
Window Integrity : 80%
Active Test Refs : 6
Total Test Refs  : 7
-------------------------------------------------------------------------------
Table 10. Show delay-template Output Fields

Label

Description

Name

Name of the delay template

Admin

State of the delay template

Tests

Number of tests referencing the delay template

Tmpl Name

Name of the delay template

Description

Description of the delay template (truncated beyond width)

Admin State

Up — The delay template is administratively enabled

Down — The delay template is administratively disabled

FD Average

forward — The average frame delay metric for forward direction

backward — The average frame delay metric for backward direction

round-trip — The average frame delay metric for round-trip direction

IFDV Average

forward — The average inter-frame delay variation metric for forward direction

backward — The average inter-frame delay variation metric for backward direction

round-trip — The average inter-frame delay variation metric for round-trip direction

Sample Window

Length of the sample window

Window Integrity

Percentage required to ensure integrity of the reporting

Active Test Refs

Number of tests actively referencing the delay template

Total Test Refs

Number of total tests referencing the delay template

delay-template-using

delay-template-using

Syntax

delay-template-using [delay-template template-name]

Context

[Tree] (show>oam-pm>streaming delay-template-using)

Full Context

show oam-pm streaming delay-template-using

Description

This command displays the list of sessions configured against one or all OAM performance monitoring delay templates.

Parameters

template-name

Displays the results for a specific delay template up to 64 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of OAM-PM streaming delay-template-using summary information.

Output Example
show oam-pm streaming delay-template-using
=========================================================================
OAM Performance Monitoring Tests Per Delay Template
=========================================================================
Template Name                                                      Admin
    Session Name                     Test Type   State
-------------------------------------------------------------------------
stream-1                                                              Up
    eth-circuit-service-epipe1             DMM   Inact
    ip-lpb111-SR-TE-LSP                    TWL     Act
    ip-circuit-service-vprn2               TWL     Act
    ip-rtr-telemetry-streaming             TWL     Act
    mpls-dm-rsvp-PE-2-PE-1                  DM     Act
    mpls-dm-static-PE-2-PE-1                DM     Act
    mpls-dm-rsvp-PE-2-PE-1-hop1             DM     Act
-------------------------------------------------------------------------
========================================================================= 
show oam-pm streaming delay-template-using delay-template "stream-1"
=========================================================================
OAM Performance Monitoring Tests Per Delay Template
=========================================================================
Template Name                                                      Admin
    Session Name                     Test Type   State
-------------------------------------------------------------------------
stream-1                                                              Up
    eth-circuit-service-epipe1             DMM   Inact
    ip-lpb111-SR-TE-LSP                    TWL     Act
    ip-circuit-service-vprn2               TWL     Act
    ip-rtr-telemetry-streaming             TWL     Act
    mpls-dm-rsvp-PE-2-PE-1                  DM     Act
    mpls-dm-static-PE-2-PE-1                DM     Act
    mpls-dm-rsvp-PE-2-PE-1-hop1             DM     Act
=========================================================================

dest-tracking

dest-tracking

Syntax

dest-tracking ip [detail]

dest-tracking ipv6 [detail]

dest-tracking sap [detail]

dest-tracking sdp [detail]

Context

[Tree] (tools>dump>filter>resources dest-tracking)

Full Context

tools dump filter resources dest-tracking

Description

This command displays information about resources pertaining to tracked targets.

Parameters

ip

Displays information about IPv4 targets.

ipv6

Displays information about IPv6 targets.

sap

Displays information about SAP targets.

sdp

Displays information about SDP targets.

detail

Displays detailed information.

Platforms

All

Output

The following output is an example of filter resource SAP destination tracking information.

Output Example
A:node-2>tools>dump>filter>resources# dest-tracking sap
===============================================================================
Unique SAPs with tracked forwarding states
===============================================================================
Used  : 1
Free  : 4095
Total : 4096
===============================================================================

The following output is an example of filter resource SAP destination tracking detailed information.

Output Example
A:node-2>tools>dump>filter>resources>dest-tracking# sap detail
===============================================================================
Unique SAPs with tracked forwarding states 
===============================================================================
Num  Destination                                      Ref. count
-------------------------------------------------------------------------------
    1 sap 1/2/2                                        1
===============================================================================
Unique SAPs with tracked forwarding states 
===============================================================================
Used  : 1
Free  : 4095
Total : 4096
===============================================================================

detail

detail

Syntax

detail [session ip-addr [label-space]] [ family]

Context

[Tree] (show>router>ldp>bindings>active detail)

Full Context

show router ldp bindings active detail

Description

This command displays details of LDP bindings.

Parameters

family

Displays either IPv4 or IPv6 LDP information.

session ip-addr[label-space]

Specifies the IP address and label space identifier.

Values

<ip-addr[label-spa*> : ipv4-address:label-space ipv6-address[label-space] label-space - [0 to 65535]

Platforms

All

detail

Syntax

detail

Context

[Tree] (show>router>pcep>pcc detail)

Full Context

show router pcep pcc detail

Description

This command displays PCEP detail information.

Platforms

All

Output

PCEP Detail Output

PCEP Detail Output Fields describes PCEP detail and status output fields.

Output Example
*A:Dut-C>config>router>mpls# show router pcep pcc detail 
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status           : Up              Oper Status          : Up
Unknown Msg Limit      : 10 msg/min      
Keepalive Interval     : 30 seconds      DeadTimer Interval   : 120 seconds
Capabilities List      : stateful-delegate stateful-pce segment-rt-path rsvp-
                         path pce-initiated-lsp
Address                : 10.20.1.3       
Report Path Constraints: True            
Redelegation Interval  : 90 seconds      
State Interval         : 180 seconds     State Timer Action   : remove
Max SR-TE PCE Init Lsps: 8191            
Open Wait Timer        : 60 seconds      Keep Wait Timer      : 60 seconds
Sync Timer             : 60 seconds      Request Timer        : 120 seconds
Connection Timer       : 60 seconds      Allow Negotiations   : False
Max Sessions           : 1               Max Unknown Req      : 1000
===============================================================================
Table 11. PCEP Detail Output Fields

Label

Description

Admin Status

Down — PCEP is administratively disabled.

Up — PCEP is administratively enabled.

Oper Status

Down — PCEP is operationally down.

Up — PCEP is operationally up.

Unknown Msg Limit

Specifies the unknown messages, per minute, limit.

Keepalive Interval

Specifies the keepalive interval.

DeadTimer Interval

Specifies the number of matching entries.

Capabilities List

Specifies the capabilities listing.

Address

Specifies the IP address.

Report Path Constraints

True — Path constrains will be reported.

False — Path constrains will not be reported.

Redelegation Interval

Specifies the redelegation timer interval.

State Interval

Specifies the state timer interval.

State Timer Action

Remove — Specifies the state timer action is remove.

None — Specifies the state timer action is none.

Max SR-TE PCE Init Lsps

Specifies the maximum number of PCE initiated SR-TE LSPs that can be created by the router.

Open Wait Timer

Specifies the open wait timer value.

Keep Wait Timer

Specifies the keep wait timer value.

Sync Timer

Specifies the sync timer value.

Request Timer

Specifies the request timer value.

Connection Timer

Specifies the connection timer value.

Allow Negotiations

True — Allow negotiations will occur.

False — Allow negotiations will not occur.

Max Sessions

Specifies the maximum sessions value.

Max Unknown Req

Specifies the maximum unknown requests value.

detail

Syntax

detail [partition]

Context

[Tree] (show>app-assure>group>http-enrich detail)

Full Context

show application-assurance group http-enrich detail

Description

This command displays detailed HTTP Enrichment information.

Parameters

partition

Specifies the partition within the group.

Values

1 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

detail

Syntax

detail

Context

[Tree] (show>router>bgp>routes detail)

Full Context

show router bgp routes detail

Description

This command displays detailed information about the BGP routes, including information about the original path attribute values.

detail is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.

Platforms

All

detected-protocols

detected-protocols

Syntax

detected-protocols {all | sap sap-id | spoke-sdp sdp-id[:vc-id]}

Context

[Tree] (clear>service>id>stp detected-protocols)

Full Context

clear service id stp detected-protocols

Description

RSTP automatically falls back to STP mode when it receives an STP BPDU. The clear detected-protocols command forces the system to revert to the default RSTP mode on the SAP or spoke SDP.

Parameters

all

Clears all detected protocol information.

sap-id

Clears the specified lease state SAP information.

sdp-id

The SDP ID to be cleared.

Values

1 to 17407

vc-id

The virtual circuit ID on the SDP ID to be cleared.

Values

1 to 4294967295

Platforms

All

deterministic

deterministic

Syntax

deterministic

Context

[Tree] (tools>perform>nat deterministic)

Full Context

tools perform nat deterministic

Description

Commands in this context perform actions of deterministic NAT.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

device

device

Syntax

device [ieee-address]

Context

[Tree] (show>system>bluetooth device)

Full Context

show system bluetooth device

Description

This command displays information for Bluetooth devices registered with the system.

Parameters

ieee-address

Specifies the MAC address, up to 30 characters.

Platforms

7750 SR-1, 7750 SR-s, 7950 XRS-20e

Output

Use the following command to display Bluetooth device information.

show system bluetooth device

The following output is an example of Bluetooth device information, and Output fields: Bluetooth device describes the output fields.

Output Example
 
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================

===============================================================================
Bluetooth Devices
===============================================================================
Device MAC        : 12:34:12:34:12:34
Description       : (Not Specified)

-------------------------------------------------------------------------------
Number of Devices : 1
===============================================================================
Table 12. Output fields: Bluetooth device
Label Description

Passkey

The Bluetooth passkey in use by the system

Advertising Timeout

The amount of time, in seconds, that the Bluetooth module advertises it is ready to pair.

Power State

The operating mode for Bluetooth

Pairing Button

Displays whether the pairing button is enabled for use

Device MAC

The MAC address of the Bluetooth device registered for connection to the module

Description

The description of the registered Bluetooth device

dhcp

dhcp

Syntax

dhcp

Context

[Tree] (show>service>id dhcp)

[Tree] (show>router dhcp)

Full Context

show service id dhcp

show router dhcp

Description

Commands in this context display DHCP information.

Platforms

All

dhcp

Syntax

dhcp

Context

[Tree] (clear>router dhcp)

[Tree] (clear>service>id dhcp)

Full Context

clear router dhcp

clear service id dhcp

Description

Commands in this context clear and reset DHCP entities.

Platforms

All

dhcp

Syntax

dhcp

Context

[Tree] (tools>perform>router dhcp)

Full Context

tools perform router dhcp

Description

Commands in this context configure tools DHCP parameters.

Platforms

All

dhcp

Syntax

dhcp [filter-id]

Context

[Tree] (show>filter dhcp)

Full Context

show filter dhcp

Description

This command displays DHCP filter information.

Parameters

filter-id

Displays detailed information for the specified filter ID and its filter entries.

Values

1 to 65535

Platforms

All

Output

The following output is an example of the command information when no filter ID is specified.

Output Example
*B:TechPubs>config# show filter dhcp
===============================================================================
DHCP Filters
===============================================================================
Filter-Id   Applied Description
-------------------------------------------------------------------------------
10          No      test-dhcp-filter
-------------------------------------------------------------------------------
Num filter entries: 1
===============================================================================
*B:TechPubs>config#


*B:TechPubs>config# show filter dhcp 10
===============================================================================
DHCP Filter
===============================================================================
Filter-Id    : 10                       Applied      : No
Entries      : 0
Description  : test-dhcp-filter
-------------------------------------------------------------------------------
Filter Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Found
===============================================================================
*B:TechPubs>config#

dhcp-client

dhcp-client

Syntax

dhcp-client interface ip-int-name statistics

Context

[Tree] (clear>router>autoconfigure dhcp-client)

Full Context

clear router autoconfigure dhcp-client

Description

This command clears DHCP client information.

Parameters

ip-int-name

Clears DHCP client information on the specified interface, up to 32 characters.

Platforms

7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s

dhcp-client

Syntax

dhcp-client interface ip-int-name routes

dhcp-client interface ip-int-name statistics

dhcp-client interface ip-int-name

Context

[Tree] (show>router>autoconfigure dhcp-client)

Full Context

show router autoconfigure dhcp-client

Description

This command displays DHCP client information.

Parameters

ip-int-name

Specifies the IP interface name, up to 32 characters.

statistics

Displays DHCP client statistics.

routes

Displays routes received by the DHCP protocol.

Platforms

7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s

dhcp-rx-stats

dhcp-rx-stats

Syntax

dhcp-rx-stats [clear]

Context

[Tree] (tools>dump dhcp-rx-stats)

Full Context

tools dump dhcp-rx-stats

Description

This command displays the DHCP received packet statistics.

Parameters

clear

Clears DHCP RX statistics.

Platforms

All

Output

The following output is an example of DHCP RX statistics information.

Output Example
*A:# tools dump dhcp-rx-stats 
===============================================================================
DHCP Received Packet Statistics
===============================================================================
     Type                  Received     Forwarded       Dropped  Dropped(ESM)
-------------------------------------------------------------------------------
IPv4 DISCOVER                    72            72             0             0
     OFFER                        2             2             0             0
     REQUEST                      4             4             0             0
     DECLINE                      0             0             0             0
     ACK                          1             1             0             0
     NAK                          0             0             0             0
     RELEASE                      0             0             0             0
     INFORM                       0             0             0             0
     FORCERENEW                   0             0             0             0
     LEASEQUERY                   0             0             0             0
     LEASEUNASSIGNED              0             0             0             0
     LEASEUNKNOWN                 0             0             0             0
     LEASEACTIVE                  0             0             0             0
     RENEW                        2             2             0             0
-------------------------------------------------------------------------------
IPv6 SOLICIT                      0             0             0             0
     ADVERTISE                    0             0             0             0
     REQUEST                      0             0             0             0
     CONFIRM                      0             0             0             0
     RENEW                        0             0             0             0
     REBIND                       0             0             0             0
     REPLY                        0             0             0             0
     RELEASE                      0             0             0             0
     DECLINE                      0             0             0             0
     RECONFIGURE                  0             0             0             0
     INFO_REQUEST                 0             0             0             0
     RELAY_FORW                   0             0             0             0
     RELAY_REPLY                  0             0             0             0
     LEASEQUERY                   0             0             0             0
     LEASEQUERY_REPLY             0             0             0             0
-------------------------------------------------------------------------------
     Total                       81            81             0             0
-------------------------------------------------------------------------------
Maximum queue length          : 0
Maximum outst pbufs total     : 1
Maximum outst pbufs to client : 1     
===============================================================================

dhcp6

dhcp6

Syntax

dhcp6

Context

[Tree] (show>system dhcp6)

[Tree] (show>router dhcp6)

[Tree] (show>service>id dhcp6)

Full Context

show system dhcp6

show router dhcp6

show service id dhcp6

Description

Commands in this context display DHCP6 related information.

Platforms

All

dhcp6

Syntax

dhcp6

Context

[Tree] (clear>router dhcp6)

[Tree] (clear>service>id dhcp6)

Full Context

clear router dhcp6

clear service id dhcp6

Description

Commands in this context clear DHCPv6 parameters.

Platforms

All

dhcp6

Syntax

dhcp6

Context

[Tree] (tools>perform>router dhcp6)

Full Context

tools perform router dhcp6

Description

Commands in this context configure tools DHCP6 parameters.

Platforms

All

dhcp6

Syntax

dhcp6 [filter-id]

Context

[Tree] (show>filter dhcp6)

Full Context

show filter dhcp6

Description

This command displays DHCP6 filter information.

Parameters

filter-id

Displays detailed information for the specified filter ID and its filter entries.

Values

1 to 65535

Platforms

All

dhcp6-client

dhcp6-client

Syntax

dhcp6-client interface ip-int-name statistics

Context

[Tree] (clear>router>autoconfigure dhcp6-client)

Full Context

clear router autoconfigure dhcp6-client

Description

This command clears DHCPv6 client information.

Parameters

ip-int-name

Clears DHCPv6 client information on the specified interface, up to 32 characters.

Platforms

7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s

dhcp6-client

Syntax

dhcp6-client interface ip-int-name

dhcp6-client interface ip-int-name statistics

Context

[Tree] (show>router>autoconfigure dhcp6-client)

Full Context

show router autoconfigure dhcp6-client

Description

This command displays DHCPv6 client information.

Parameters

ip-int-name

Specifies the IP interface name, up to 32 characters.

statistics

Displays DHCPv6 client statistics.

Platforms

7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s

diameter

diameter

Syntax

diameter

Context

[Tree] (show>service>active-subscribers>hierarchy diameter)

Full Context

show service active-subscribers hierarchy diameter

Description

This command provides information about the active Diameter Gx and Diameter Gy session IDs.

Note: The diameter NASREQ application is stateless in SR OS and therefore a NASREQ session ID is not included in the output.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the active Diameter Gx and Gy session IDs and Active subscriber hierarchy diameter field descriptions describes the output fields.

show service active-subscribers hierarchy diameter
Output Example
===============================================================================
Active Subscribers Hierarchy (diameter information)
===============================================================================
-- ipoe-1
   (sub-profile-1)
   |
   +-- sap:[1/x1/1/c1/4:2211.2005] - sla:sla-profile-1
       |   Gy-diam-session-id:bng-gy.realm-2.com;1668427651;23
       |
       +-- IPOE-Session - mac:00:bb:02:00:00:05
           |   Gx-diam-session-id:bng-nasreq-gx.realm-1.com;1668427651;22
           |
           |-- 10.2.1.13
           |
           +-- 2001:db8:b002:100::1/128
               |
               +-- 2001:db8:b002:101::/64

-------------------------------------------------------------------------------
Number of active subscribers : 1
Flags: (N) = the host or the managed route is in non-forwarding state
===============================================================================
Table 13. Active subscriber hierarchy diameter field descriptions

Field

Description

Gy-diam-session-id

The active Diameter Gy session ID for this SLA Profile Instance. N/A when no session is active.

Gx-diam-session-id

The active Diameter Gx session ID for this subscriber host or session. N/A when no session is active.

diameter-application-policy

diameter-application-policy

Syntax

diameter-application-policy [name]

Context

[Tree] (show>subscr-mgmt diameter-application-policy)

Full Context

show subscriber-mgmt diameter-application-policy

Description

This command displays Diameter application policy information.

Parameters

name

Specifies the application policy, up to 32 characters, for which orphaned Gx sessions are displayed.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management Diameter application policy information

Output Example
# show subscriber-mgmt diameter-application-policy
===============================================================================
DIAMETER application policies
===============================================================================
Name                             Description
-------------------------------------------------------------------------------
diameter-gx-policy-1             Diameter Gx policy
diameter-gy-policy-1             Diameter Gy policy
diameter-nasreq-policy-1         Diameter NASREQ policy
-------------------------------------------------------------------------------
No. of policies: 3
===============================================================================


# show subscriber-mgmt diameter-application-policy "diameter-nasreq-policy-1"
===============================================================================
DIAMETER application policy "diameter-nasreq-policy-1"
===============================================================================
Description                 : Diameter NASREQ policy
Session failover            : enabled
Failover handling           : continue
Application                 : nasreq
Tx timer (s)                : 10
Last management change      : 02/28/2015 14:53:49
-------------------------------------------------------------------------------
NASREQ
-------------------------------------------------------------------------------
Include AVP                 : nas-port-id
                              nas-port-type
NAS-Port-Id prefix type     : none
NAS-Port-Id suffix type     : user-string
NAS-Port-Id suffix          : @bng1
NAS-Port-Type type          : standard

User name format            : mac
User name operation         : no-operation
MAC address format          : aa:
Last management change      : 02/28/2015 14:53:49
===============================================================================
Interfaces using diameter-auth-policy "diameter-nasreq-policy-1"
-------------------------------------------------------------------------------
Interface-name                   Service-id Type
-------------------------------------------------------------------------------
group-int-1-1                    1000       IES
-------------------------------------------------------------------------------
No. of interfaces: 1 
-------------------------------------------------------------------------------
VPLS SAP's with diameter-auth-policy "diameter-nasreq-policy-1"
-------------------------------------------------------------------------------
Service    SAP
-------------------------------------------------------------------------------
10         1/1/4:*.*
-------------------------------------------------------------------------------
No. of SAP's: 1
-------------------------------------------------------------------------------


*A:Dut-C# show subscriber-mgmt diameter-application-policy "diamapppol_gx"
===============================================================================
DIAMETER application policy "diamapppol_gx"
===============================================================================
Description                 : (Not Specified)
Session failover            : enabled
Failover handling           : retry-and-terminate
Peer policy                 : diampeerpol_gx
Application                 : gx
Tx timer (s)                : 10
Last management change      : 05/08/2015 05:55:59
-------------------------------------------------------------------------------
Gx
-------------------------------------------------------------------------------
Include AVP                 : an-gw-address
Calling-Station-Id type     : mac
NAS-Port bits spec          : 0
NAS-Port-Id prefix type     : user-string
NAS-Port-Id prefix          : Testing
NAS-Port-Id suffix type     : circuit-id
NAS-Port-Type value         : 0
User-Equipment-Info         : mac

Subscription-Id-Data origin : subscriber-id
Subscription-Id-Data type   : e164
MAC address format          : aa:
Report IP address event     : enabled
CCR-t replay interval       : 60
Last management change      : 05/08/2015 06:54:27

Diameter Application Policy Field Descriptions describes diameter application policy output fields.

Table 14. Diameter Application Policy Field Descriptions

Field

Description

Description

The user provided description of this policy

Session failover

Failover is enabled or disabled

Failover Handling

Handling is retry-and-terminate or terminate

Peer policy

The diameter application peer policy name

Application

The policy’s application, gx, gy, or nasreq

Tx timer (s)

The maximum wait time (seconds) while a client is pending

Last management change

The time of the most recent management-initiated change to this policy

Include AVP

The attribute-value-pairs for Gx messages

Calling-Station-Id type

The string that is put in the RADIUS Calling-Station-Id attribute if included in RADIUS authentication request messages

NAS-Port bits spec

The number that is put in the RADIUS NAS-Port attribute if included in RADIUS authentication request messages

NAS-Port-Id prefix type

The type of prefix that is added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages

NAS-Port-Id prefix

The user configurable string that is added as the prefix to the NAS-Port attribute if included in RADIUS accounting-request messages

NAS-Port-Id suffix type

The user configurable string that is added as the suffix to the NAS-Port attribute if included in RADIUS accounting-request messages

NAS-Port-Type value

The value that is put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages

User-Equipment-Info

The user equipment info, eui64, imeisv, mac, or modified-eui64

diameter-application-policy

Syntax

diameter-application-policy name statistics

Context

[Tree] (clear>subscr-mgmt diameter-application-policy)

Full Context

clear subscriber-mgmt diameter-application-policy

Description

This command clears Diameter application policy data.

Parameters

name

Specifies the Diameter application policy name, up to 32 characters.

statistics

Clears Diameter application policy statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

diameter-node

diameter-node

Syntax

diameter-node origin-host-string peer dest-host-string

diameter-node origin-host-string peer dest-host-string statistics

diameter-node origin-host-string peers

diameter-node origin-host-string routing-table

Context

[Tree] (show>aaa diameter-node)

Full Context

show aaa diameter-node

Description

This command displays information about a Diameter node.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following outputs are examples of Diameter node information.

Output Example
show aaa diameter node "node1.myrealm.com" routing-table  
=============================================================================== 
Diameter Routing Table (Node: node1.myrealm.com) 
=============================================================================== 
Realm Name                       Appl      Pref:Index    Server-Identifier 
------------------------------------------------------------------------------- 
subrealm.telenet.be              Gx        30:1          node1.subrealm.telenet.be 
telenet.be                       Gx        60            node2.subrealm.telenet.be 
telenet.be                       relay     50            node3.subrealm.telenet.be 
------------------------------------------------------------------------------- 
No. of Routes: 5 
=============================================================================== 

Diameter Node Routing Table Field Descriptions describes routing entries in the Diameter realm-based routing table fields.

Table 15. Diameter Node Routing Table Field Descriptions

Field

Description

Realm Name

The destination realm name

Appl

The application for which this route will be used. Supported applications:

  • NASREQ

  • Gx

  • Gy

  • Relay (encompass all applications)

Pref:Index

The preference and index of the peer. Peers for the same realm are selected in order of preference. Peers with the lowest preference are preferred. If multiple peers have the same preference for the same realm, the peer with a lowest index is selected. Preference and index are user-configured parameters.

Server-Identifier

The next hop peer name

show aaa diameter node "node1.myrealm.com" peer "relay.telenet.be"
===============================================================================
Diameter Node : node1.myrealm.com
===============================================================================
Index                  : 1
Remote Host Identity   : relay.telenet.be
Remote Realm           : telenet.be
Remote IP address      : 13.0.1.5
Remote Port:  3868
Remote Origin-State-Id : 1522062441
Local Host Identity    : bng1.bng.nokia.com
Local Realm            : bng.nokia.com
Local IP address       : 13.0.1.4
Local port:  3456
Peer Admin State       : Up
Peer Active            : Yes
Peer Status            : I-Open
Active Applications    : nasreq gx
Last Disconnect Cause  : rebooting
Preference             : 4
Connection Timer (Tc)  : 10
Watchdog Timer   (Tw)  : 237
...      
Last Mgmt Change       : 03/23/2018 11:42:43

Diameter Node Peer Field Descriptions describes Diameter node peer fields.

Table 16. Diameter Node Peer Field Descriptions

Field

Description

Diameter Node

The Diameter node under which this peer is active

Index

The Peer index is a peer configuration parameter

Remote Host Identity

The peer identity

Remote Realm

The realm to which the peer belongs

Remote IP address

The IP address of the peer

Remote Port

The port on the peer used for Diameter communication

Remote Origin-State-Id

The Origin-State-Id of the peer

Local Host Identity

The local identity

Local Realm

The local realm name

Local IP address

The local IP address

Local Port

The local port used for Diameter communication

Peer Admin State

The administrative state of the configured peer

Peer Active

Indicates whether the connection towards the peer is active

Peer Status

The operational status of the configured peer

Active Applications

The applications used over this peer

Last Disconnect Cause

The last disconnect cause

Preference

The configured preference of the peer

Connection Timer (Tc)

The timer used to initiate connections towards the peer. In case that the connection is not successfully established, a new attempt is periodically tried (every Tc interval)

Watchdog Timer (Tw)

The watchdog timer value that detects the failed connection towards the peer

Last Mgmt Change

The date and time of the last management change

show aaa diameter node "node1.myrealm.com" peer-table
===============================================================================
Diameter Peer Table (Node: node1.myrealm.com)
===============================================================================
Host Identity                       StatusT       Susp
-------------------------------------------------------------------------------
relay.telenet.be                    
                                    I-Open        No
relay.proximus.be                   
                                    I-Open        No
relay.proximus.be                   
                                    Closed        No
-------------------------------------------------------------------------------
No. of Active Peers: 2

Diameter Node Peer Table Field Descriptions describes Diameter node peer table fields.

Table 17. Diameter Node Peer Table Field Descriptions

Field

Description

Node

The Diameter node name

Host Identity

The peer identity

StatusT

The status of the peer

Susp

The suspension state of the peer (based on watchdogs)

Server-Identifier

The next hop peer name

show aaa diameter-node "gyrouter.workstation.be" peer "gyserver-1.workstation.be" statistics
===============================================================================
Peer "gyserver-1.workstation.be"
===============================================================================
Message                              Sent                 Received
-------------------------------------------------------------------------------Capabilities-Exchange-Request        2                    0
Capabilities-Exchange-Answer         0                    2
Disconnect-Peer-Request              0                    0
Disconnect-Peer-Answer               0                    0
Device-Watchdog-Request              188                  0
Device-Watchdog-Answer               0                    188
Application message request          2367                 0
Application message answer           0                    2366
Last cleared time: N/A
===============================================================================
show aaa diameter-node "sr" routing-table 
===============================================================================
Routes
===============================================================================
Realm-Name                              
           Application   Pref. Entry   Server-Identifier
-------------------------------------------------------------------------------
realm-2
           (relay)       5     dynamic node-b
realm-3
           gx            10    static  node-b
realm-4
           gy            20    static  node-b
realm-2
           (relay)       5     dynamic node-c
realm-3
           gx            20    static  node-c
realm-4
           gy            10    static  node-c
-------------------------------------------------------------------------------
No. of routes: 6
===============================================================================
A:Dut-C# 

Diameter Node SR Routing Table Field Descriptions describes the Diameter node SR table fields.

Table 18. Diameter Node SR Routing Table Field Descriptions

Field

Description

Realm Name

The destination realm name

Application

The application for which this route will be used. Supported applications:

  • NASREQ

  • Gx

  • Gy

  • Relay (all applications)

Pref

The preference and index of the peer. Peers for the same realm are selected in order of preference. Peers with higher preference are preferred. If multiple peers have the same preference for the same realm, the peer with a lowest index is selected. Preference and index are user-configured parameters.

Entry

Dynamic or static diameter route

Server-Identifier

The next hop peer name

diameter-node

Syntax

diameter-node origin-host-string peer dest-host-string statistics

Context

[Tree] (clear>aaa diameter-node)

Full Context

clear aaa diameter-node

Description

This command clears Diameter node data.

Parameters

origin-host-string

Specifies the origin host name, up to 80 characters.

dest-host-string

Specifies the destination host name, up to 80 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

diameter-session

diameter-session

Syntax

diameter-session

Context

[Tree] (show>subscr-mgmt diameter-session)

Full Context

show subscriber-mgmt diameter-session

Description

Commands in this context display diameter session information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

diameter-session

Syntax

diameter-session

Context

[Tree] (clear>subscr-mgmt diameter-session)

Full Context

clear subscriber-mgmt diameter-session

Description

This command clears diameter session data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

direct-export

direct-export

Syntax

direct-export

Context

[Tree] (show>app-assure>group>cflowd direct-export)

Full Context

show application-assurance group cflowd direct-export

Description

Commands in this context display cflowd direct-export output.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

discovery

discovery

Syntax

discovery [{peer [ip-address]} | {interface [ ip-int-name]}] [state state] [detail] [ adjacency-type type]

discovery [state state] [detail | summary] [adjacency-type type] [session ip-addr[label-space]]

discovery [state state] [detail | summary] [adjacency-type type] [family]

discovery interface [ip-int-name] [state state] [detail | summary] [session ip-addr[label-space]]

discovery peer [ip-address] [state state] [ detail | summary] [session ip-addr[ label-space]]

Context

[Tree] (show>router>ldp discovery)

Full Context

show router ldp discovery

Description

This command displays the status of the interfaces participating in LDP discovery.

Parameters

peer ip-address

Specifies to display the IP address of the peer.

interface ip-int-name

The name of an existing interface. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

state state

Specifies to display the current operational state of the adjacency.

Values

established, trying, down

detail

Specifies to display detailed information.

family

Displays either IPv4 or IPv6 LDP session information.

adjacency-type type

Specifies to display the adjacency type.

Values

link, targeted

Platforms

All

Output

LDP Discovery Output

LDP Discovery Output Fields describes the LDP discovery output fields.

Table 19. LDP Discovery Output Fields

Label

Description

Interface Name

The name of the interface.

Local Addr

The IP address of the originating (local) router.

Peer Addr

The IP address of the peer.

AdjType

The adjacency type between the LDP peer and LDP session is targeted.

State

Established — The adjacency is established.

Trying — The adjacency is not yet established.

No. of Hello Adjacencies

The total number of hello adjacencies discovered.

Up Time

The amount of time the adjacency has been enabled.

Hold Time Remaining

The time left before a neighbor is declared to be down.

Output Example
*A:Dut-A# show router ldp discovery          
============================================================================== 
LDP IPv4 Hello Adjacencies
============================================================================== 
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              192.0.2.1:0                               Estab
targ                             198.51.100.1:0                              
                                                                         
N/A                              192.0.2.1:0                               Estab
targ                             203.0.113.1:0                              
                                                                         
to_SR2                           192.0.2.1:0                               Estab
link                             198.51.100.1:0                              
                                                                         
to_SR2_2                         192.0.2.1:0                               Estab
link                             198.51.100.1:0                              
                                                                         
to_SR3                           192.0.2.1:0                               Estab
link                             203.0.113.1:0                              
                                                                         
No. of IPv4 Hello Adjacencies: 5
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
to_SR2                           10.0.50.1:0                            Estab
link                             10.0.50.2:0                              
                                                                         
to_SR2_2                         fe80::4624:1ff:fe01:6                   Trying
link                             ff02::2                              
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A# show router ldp discovery detail 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 198.51.100.1
-------------------------------------------------------------------------------
Local Address      : 192.0.2.1:0
Peer Address       : 198.51.100.1:0
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:22:58        Hold Time Remaining : 38
Hello Mesg Recv    : 104                Hello Mesg Sent     : 104
Local IP Address   : 192.0.2.1
Peer IP Address    : 198.51.100.1
Local Hello Timeout: 45                 Remote Hello Timeout: 45
Local Cfg Seq No   : 2476449752         Remote Cfg Seq No   : 2494880985
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
-------------------------------------------------------------------------------
Peer 203.0.113.1
-------------------------------------------------------------------------------
Local Address      : 192.0.2.1:0
Peer Address       : 198.51.100.1:0
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:27:24        Hold Time Remaining : 36
Hello Mesg Recv    : 124                Hello Mesg Sent     : 124
Local IP Address   : 192.0.2.1
Peer IP Address    : 203.0.113.1
Local Hello Timeout: 45                 Remote Hello Timeout: 45
Local Cfg Seq No   : 1472397992         Remote Cfg Seq No   : 2705515863
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2"
-------------------------------------------------------------------------------
Local Address      : 192.0.2.1:0
Peer Address       : 198.51.100.1:0
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:23:11        Hold Time Remaining : 13
Hello Mesg Recv    : 366                Hello Mesg Sent     : 365
Local IP Address   : 10.0.60.1
Peer IP Address    : 10.0.60.2
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 416151817          Remote Cfg Seq No   : 2265512807
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2_2"
-------------------------------------------------------------------------------
Local Address      : 192.0.2.1:0
Peer Address       : 198.51.100.1:0
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:23:12        Hold Time Remaining : 13
Hello Mesg Recv    : 368                Hello Mesg Sent     : 367
Local IP Address   : 60.60.61.1
Peer IP Address    : 60.60.61.2
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 1472397992         Remote Cfg Seq No   : 2705515863
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR3"
-------------------------------------------------------------------------------
Local Address      : 192.0.2.1:0
Peer Address       : 203.0.113.1:0
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:27:36        Hold Time Remaining : 12
Hello Mesg Recv    : 438                Hello Mesg Sent     : 437
Local IP Address   : 10.0.90.1
Peer IP Address    : 10.0.90.2
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3784603428         Remote Cfg Seq No   : 1928455485
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled (R)
===============================================================================
No. of IPv4 Hello Adjacencies: 5
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "to_SR2"
-------------------------------------------------------------------------------
Local Address      : 10.0.50.1:0
Peer Address       : 10.0.50.2:0
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:19:22        Hold Time Remaining : 12
Hello Mesg Recv    : 306                Hello Mesg Sent     : 306
Local IP Address   : fe80::4624:1ff:fe01:1
Peer IP Address    : fe80::4651:1ff:fe01:1
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3349779675         Remote Cfg Seq No   : 4177487405
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2_2"
-------------------------------------------------------------------------------
Local Address      : fe80::4624:1ff:fe*
Peer Address       : ff02::2
Adjacency Type     : link               State               : Trying
===============================================================================
No. of IPv6 Hello Adjacencies: 2
===============================================================================
* indicates that the corresponding row element may have been truncated
*A:Dut-A# 

*A:Dut-A# show router ldp discovery peer detail           
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address      : 10.20.1.1:0
Peer Address       : 10.20.1.6:0
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:02:48        Hold Time Remaining : 15
Hello Mesg Recv    : 46                 Hello Mesg Sent     : 45
Local IP Address   : 10.20.1.1
Peer IP Address    : 10.20.1.6
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3886383873         Remote Cfg Seq No   : 3487172342
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 3ffe::a14:106
-------------------------------------------------------------------------------
Local Address      : 3ffe::a14:101[0]
Peer Address       : 3ffe::a14:106[0]
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:01:03        Hold Time Remaining : 34
Hello Mesg Recv    : 6                  Hello Mesg Sent     : 5
Local IP Address   : 3ffe::a14:101
Peer IP Address    : 3ffe::a14:106
Local Hello Timeout: 45                 Remote Hello Timeout: 45
Local Cfg Seq No   : 4281565287         Remote Cfg Seq No   : 1836745726
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery adjacency-type targeted 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                        Estab
targ                             3ffe::a14:106[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 
*A:Dut-A# show router ldp discovery adjacency-type targeted ipv6 state established 
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                        Estab
targ                             3ffe::a14:106[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================





===============================================================================
*A:Dut-A# show router ldp discovery peer           
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                         Estab
targ                             3ffe::a14:106[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery peer 10.20.1.6 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery peer 10.20.1.6 detail 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address      : 10.20.1.1:0
Peer Address       : 10.20.1.6:0
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:02:25        Hold Time Remaining : 11
Hello Mesg Recv    : 39                 Hello Mesg Sent     : 39
Local IP Address   : 10.20.1.1
Peer IP Address    : 10.20.1.6
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3886383873         Remote Cfg Seq No   : 3487172342
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery peer detail           
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address      : 10.20.1.1:0
Peer Address       : 10.20.1.6:0
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:02:48        Hold Time Remaining : 15
Hello Mesg Recv    : 46                 Hello Mesg Sent     : 45
Local IP Address   : 10.20.1.1
Peer IP Address    : 10.20.1.6
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3886383873         Remote Cfg Seq No   : 3487172342
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 3ffe::a14:106
-------------------------------------------------------------------------------
Local Address      : 3ffe::a14:101[0]
Peer Address       : 3ffe::a14:106[0]
Adjacency Type     : targeted           State               : Established
Up Time            : 0d 00:01:03        Hold Time Remaining : 34
Hello Mesg Recv    : 6                  Hello Mesg Sent     : 5
Local IP Address   : 3ffe::a14:101
Peer IP Address    : 3ffe::a14:106
Local Hello Timeout: 45                 Remote Hello Timeout: 45
Local Cfg Seq No   : 4281565287         Remote Cfg Seq No   : 1836745726
Lcl IPv4 P2MP Capbl: Disabled           Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled           Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery adjacency-type targeted 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                        Estab
targ                             3ffe::a14:106[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 
*A:Dut-A# show router ldp discovery adjacency-type targeted ipv6 state established 
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                        Estab
targ                             3ffe::a14:106[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#

*A:Dut-A# show router ldp discovery session 10.20.1.6 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1" 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     10.20.1.1:0                             Estab
link                             10.20.1.2:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:102[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1" detail 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "ip-10.10.1.1"
-------------------------------------------------------------------------------
Local Address      : 10.20.1.1:0
Peer Address       : 10.20.1.2:0
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:26:52        Hold Time Remaining : 14
Hello Mesg Recv    : 426                Hello Mesg Sent     : 423
Local IP Address   : 10.10.1.1
Peer IP Address    : 10.10.1.2
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 3499624168         Remote Cfg Seq No   : 1622338078
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "ip-10.10.1.1"
-------------------------------------------------------------------------------
Local Address      : 3ffe::a14:101[0]
Peer Address       : 3ffe::a14:102[0]
Adjacency Type     : link               State               : Established
Up Time            : 0d 00:26:32        Hold Time Remaining : 12
Hello Mesg Recv    : 421                Hello Mesg Sent     : 418
Local IP Address   : fe80::11
Peer IP Address    : fe80::12
Local Hello Timeout: 15                 Remote Hello Timeout: 15
Local Cfg Seq No   : 1658693689         Remote Cfg Seq No   : 4291225243
Lcl IPv4 P2MP Capbl: Enabled            Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Enabled            Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled            Rem IPv4 Pfx Capbl  : Enabled
Lcl IPv6 Pfx Capbl : Enabled            Rem IPv6 Pfx Capbl  : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 
*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1" summary 
 No. of IPv4 Hello Adjacencies: 1
 No. of IPv6 Hello Adjacencies: 1
*A:Dut-A#
*A:Dut-A# show router ldp discovery interface "ip-10.10.2.1" state established 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.2.1                     10.20.1.1:0                             Estab
link                             10.20.1.3:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.2.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:103[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery state established 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              10.20.1.1:0                             Estab
targ                             10.20.1.6:0                             
                                                                         
ip-10.10.1.1                     10.20.1.1:0                             Estab
link                             10.20.1.2:0                             
                                                                         
ip-10.10.2.1                     10.20.1.1:0                             Estab
link                             10.20.1.3:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 3
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
N/A                              3ffe::a14:101[0]                        Estab
targ                             3ffe::a14:106[0]                        
                                                                         
ip-10.10.1.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:102[0]                        
                                                                         
ip-10.10.2.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:103[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 3
===============================================================================
*A:Dut-A#  
*A:Dut-A# show router ldp discovery adjacency-type link     
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     10.20.1.1:0                             Estab
link                             10.20.1.2:0                             
                                                                         
ip-10.10.2.1                     10.20.1.1:0                             Estab
link                             10.20.1.3:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 2
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:102[0]                        
                                                                         
ip-10.10.2.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:103[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery adjacency-type link ipv6 
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:102[0]                        
                                                                         
ip-10.10.2.1                     3ffe::a14:101[0]                        Estab
link                             3ffe::a14:103[0]                        
                                                                         
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A# 

*A:Dut-A# show router ldp discovery session 10.20.1.2 
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name                   Local Addr                              State
AdjType                          Peer Addr                               
-------------------------------------------------------------------------------
ip-10.10.1.1                     10.20.1.1:0                             Estab
link                             10.20.1.2:0                             
                                                                         
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A# 
*A:Dut-A# show router ldp discovery session 10.20.1.2 summary 
 No. of IPv4 Hello Adjacencies: 1
*A:Dut-A# 

dist-cpu-protection

dist-cpu-protection

Syntax

cpu-protection

Context

[Tree] (show>system>security dist-cpu-protection)

Full Context

show system security dist-cpu-protection

Description

Commands in this context display Distributed CPU Protection information.

Platforms

All

dist-cpu-protection

Syntax

dist-cpu-protection

Context

[Tree] (tools>perform>security dist-cpu-protection)

[Tree] (tools>dump>security dist-cpu-protection)

Full Context

tools perform security dist-cpu-protection

tools dump security dist-cpu-protection

Description

This command displays to release Distributed CPU Protection parameters and status at the per card and forwarding plane level.

Platforms

All

dist-cpu-protection

Syntax

dist-cpu-protection [detail]

Context

[Tree] (show>port dist-cpu-protection)

Full Context

show port dist-cpu-protection

Description

This command displays distributed CPU protection information.

Parameters

detail

Displays detailed information.

Platforms

All

diversity

diversity

Syntax

diversity diversity-assoc-name

Context

[Tree] (show>router>pcep>pcc>pce-assoc diversity)

Full Context

show router pcep pcc pce-associations diversity

Description

This command displays the diversity association information.

If a diversity association name is not specified, the information for all configured diversity associations is displayed.

Parameters

diversity-assoc-name

Specifies the diversity association name.

Platforms

All

Output

The following output is an example of diversity association information, and Show Diversity Association Descriptions describes the output fields.

Output Example
*A:Dut-C>config>router>mpls>lsp# show router pcep pcc pce-associations diversity "test_div" 
===============================================================================
PCEP PCC Diversity Associations Info
===============================================================================
Assocation Name    : test_div
Association ID     : 20                 Association Source : 192.168.213.59
Diversity Type     : link               Disjointness Type  : loose
Disjoint Reference : False              
===============================================================================
Table 20. Show Diversity Association Descriptions

Label

Description

Association Name

The diversity association name

Association ID

The diversity association ID

Association Source

The diversity source address of the diversity association. Both IPv4 and IPv6 addresses are supported.

Diversity Type

The diversity type of the diversity association

Disjointness Type

The disjointness type of the diversity association

Disjoint Reference

The P-flag value conveyed to the disjointness configuration TLV

dm

dm

Syntax

dm [interval seconds] [ repeat repeat] [absolute | rate]

Context

[Tree] (monitor>oam-pm>session dm)

Full Context

monitor oam-pm session dm

Description

This command monitors the MPLS Delay Measurement (DM) statistics for the specified test's raw measurement interval.

Parameters

seconds

Specifies the time interval, in seconds.

Values

3 to 60

Default

10

repeat

Specifies the number of times the command is repeated.

Values

1 to 999

Default

10

absolute

Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.

rate

Specifies that the rate-per-second is displayed.

Default

delta

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

dm

Syntax

dm

Context

[Tree] (show>oam-pm>stats>session dm)

Full Context

show oam-pm statistics session dm

Description

This command selects the session's MPLS DM test for the statistical display.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

dmm

dmm

Syntax

dmm [interval seconds] [ repeat repeat] [absolute | rate]

Context

[Tree] (monitor>oam-pm>session dmm)

Full Context

monitor oam-pm session dmm

Description

This command monitors the Ethernet Delay Measurement Message (DMM) statistics for the specified test's raw measurement interval.

Parameters

seconds

Specifies the time interval, in seconds.

Values

3 to 60

Default

10

repeat

Specifies the number of times the command is repeated.

Values

1 to 999

Default

10

absolute

Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.

rate

Specifies that the rate-per-second is displayed.

Default

delta

Platforms

All

dmm

Syntax

dmm

Context

[Tree] (show>oam-pm>stats>session dmm)

Full Context

show oam-pm statistics session dmm

Description

This command selects the session's Ethernet DMM test for the statistical display.

Platforms

All

dns

dns

Syntax

dns

Context

[Tree] (show>router dns)

Full Context

show router dns

Description

This command displays DNS information.

Platforms

All

Output

The following output is an example of DNS settings information.

Output Example
*A:Dut-C# show router dns                                              
===============================================================================
Redirect VPRN               : Service: 300
Administrative state        : enabled
Default domain name         : (Not Specified)
Primary DNS                 : 9.0.0.22
Secondary DNS               : 2009::16
Tertiary DNS                : (Not Specified)
IPv4 source address         : 5.1.45.3
IPv6 source address         : 2005::1:2d:3
Last management change      : 01/13/2020 11:00:13 

dns-ip-cache

dns-ip-cache

Syntax

dns-ip-cache cache-name isa mda-id

dns-ip-cache cache-name

Context

[Tree] (show>app-assure>group dns-ip-cache)

Full Context

show application-assurance group dns-ip-cache

Description

This command displays the application assurance DNS IP cache statistics and status information.

Parameters

cache-name

Specifies the DNS IP cache for a particular ISA-AA card, up to 32 characters.

mda-id

Specifies the AA ISA.

Values

slot 1 to 10, mda 1 to 2

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

Show DNS IP Cache Output Fields describes the show command output fields.

Table 21. Show DNS IP Cache Output Fields

Label

Description

Admin Status

Indicates the administrative status of the DNS IP cache. [Up | Down]

Domain expressions

Indicates the number of DNS domain expressions configured.

Server addresses

Indicates the number of server-addresses configured

High-Watermark

Indicates the value, in percentage, of the configured high watermark.

Low-Watermark

Indicates the value, in percentage, of the configured low watermark.

Cache-size

Indicates the value of the configured maximum cache size.

Usage

Indicates the value, in percentage, of the total for the number of entries in the cache.

Alarm State

Indicates the status of the alarm related to the DNS IP cache high/low watermark utilization. The alarm is raised when the high watermark is crossed; it is cleared when it goes below the low watermark. [Clear | Raised]

Hit-Count

Indicates the number of times an IP address lookup in this cache was successful.

Total responses

Indicates the total number of DNS responses analyzed.

Domain name matched

Indicates the number of times a domain name defined in the DNS match criteria matched a DNS response.

Domain & server matched

Indicates the number of times both the domain name and server address defined in the DNS match criteria matched a DNS response.

Total entries added

Indicates the total number of IP entries added in the cache.

Total entries removed

Indicates the total number of IP entries removed from the cache after the entry expired.

Full count

Indicates the total number of IP entries in the cache.

Hit Count

Indicates the number of times an IP address lookup in this cache was successful. The IP address lookup is performed in app-filters and is successful if the server address DNS IP cache criteria is met.

Miss Count

Indicates the number of times an IP address lookup in this cache was unsuccessful. The IP address lookup is performed in app-filters and is unsuccessful if the server address DNS IP cache criteria is not met.

Output Example
*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache" 
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache"
===============================================================================
Admin Status                : Up
 
Domain expressions          : 11 (out of 32)
Server addresses            : 0 (out of 64)
High watermark              : 40%
Low watermark               : 35%
Cache size                  : 5000

-------------------------------------------------------------------------------
ISA                        Usage         (%)        Alarm             Hit Count
                                                    State                      
-------------------------------------------------------------------------------
1/2                            0     (0.00%)        clear                     0
3/2                          133    (88.66%)       raised                    18
===============================================================================

*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 3/1 
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache" ISA 3/1
===============================================================================
Admin Status                : Up
 
Domain expressions          : 11 (out of 32)
Server addresses            : 0 (out of 64)
High watermark              : 40%
Low watermark               : 35%
Cache size                  : 5000

-------------------------------------------------------------------------------
ISA 3/1 DNS Stats
-------------------------------------------------------------------------------
DNS
    Total responses         : 5751
    Domain name matched     : 106
    Domain & server matched : 106
Cache
    Total entries added     : 118
    Total entries removed   : 0
    Usage                   : 118 (2.36%) threshold alarm clear
    Full count              : 0

    Hit count               : 274
    Miss count              : 20379
===============================================================================

dns-ip-cache

Syntax

dns-ip-cache dns-ip-cache-name url file-url

dns-ip-cache dns-ip-cache-name isa mda-id/esa-vm-id [url file-url] [new-ip-count]

Context

[Tree] (tools>dump>app-assure>group dns-ip-cache)

Full Context

tools dump application-assurance group dns-ip-cache

Description

This command displays the list of IP addresses stored in a DNS IP cache.

Parameters

dns-ip-cache-name

Specifies a DNS IP cache name, up to 32 characters.

url file-url

Specifies the URL for the file to direct the search output to. The file may be local or remote.

Values

local-url | remote-url

local-url

[<cflash-id>/][<file-path>]

200 chars max, including cflash-id

directory length 99 chars max each

remote-url

{ftp| tftp}://[<login>:<pswd>@]

<remote-locn>/[<file-path>]

255 chars max

<file-path> 199 chars max

remote-locn

{ <hostname> | <ipv4-address> |

"["<ipv6-address>"]" }[:<port>]

ipv4-address

a.b.c.d

ipv6-address

x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

x - [0..FFFF]H

d - [0..255]D

interface - 32 chars max, for link

local addresses

port

[0..65535]

cflash-id

cf1:| cf1-A:| cf1-B:| cf2:| cf2-A:|

cf2-B:| cf3:| cf3-A:| cf3-B:

isa mda-id/esa-vm-id

Specifies the DNS IP cache for a particular ISA-AA card.

Values

slot/mda

slot: 1 to 10

mda: 1, 2

esa-esa-id/vm-id

esa-id: 1 to 16

vm-id: 1 to 4

new-ip-count

Displays the number of new IP addresses added to the cache.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following are output examples for this command.

Output Example
*A:7750# tools dump application-assurance group 1 dns-ip-cache "Default DNS IP Cache" 
isa 3/2 
=====================================================
Application-Assurance dns-ip-cache "Default DNS IP Cache"
Current Time:          "01/21/2015 16:44:00" (UTC)
  group:               1
  isa:                 3/2
  admin state:         no shutdown
  max-entries:         150
=====================================================
ip-address                              creationTime(UTC)     lastUpdated(sec)   
numDNSResponses      lastMatchTime(UTC)    numTimesMatched     
2001:db8:3d40:3::3fa8:3d59              "01/21/2015 16:42:49" 71                  5
"01/21/2015 16:42:49" 0                   
2001:db8:3d40:3::3fa8:3d0b              "01/21/2015 16:42:49" 71                  1
"01/21/2015 16:42:49" 0                   
2001:db7:3d40:3::3fa8:3d2b              "01/21/2015 16:42:49" 71                  1
"01/21/2015 16:42:49" 0                   
192.168.74.203                          "01/21/2015 16:42:36" 84                  67
"01/21/2015 16:42:36" 0                   
192.168.124.91                          "01/21/2015 16:42:36" 84                  15
"01/21/2015 16:42:36" 0                   
192.168.124.97                          "01/21/2015 16:42:36" 84                  15
"01/21/2015 16:42:36" 0                   
192.168.86.136                          "01/21/2015 16:42:36" 84                   5
"01/21/2015 16:42:36" 0                   
192.168.74.176                          "01/21/2015 16:42:36" 84                  67
"01/21/2015 16:42:36" 0                   
192.168.86.99                           "01/21/2015 16:42:36" 84                  11
"01/21/2015 16:42:36" 0 
Output Example

>/tools dump application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 5/2 new-ip-count 
=====================================================
Application-Assurance dns-ip-cache "Default DNS IP Cache"
Current Time:          "08/06/2020 15:16:50" (UTC)
  group:               1
  isa:                 5/2
  admin state:         no shutdown
  num-domains:         2
=====================================================
domain              hostname                           new-ip-count        
"Tango"             "*.tango.me$"                      37                  
"Google"            "*.google.*"                       6                   
=====================================================
Table 22. Tools DNS IP Cache Output Fields

Label

Description

ip-address

Indicates the IP address stored in the DNS IP cache. The address is added into the cache if the DNS response meets the DNS IP cache match criteria (domain name and DNS server address).

creationTime

Indicates the time at which the entry was created. The entry is created by a DNS response meeting the DNS IP cache match criteria (domain name and DNS server address).

lastUpdated(UTC)

Indicates the time at which the entry was last updated, either from a new IP flow (fully classified) using the same IP address or a new DNS response meeting the DNS IP cache match criteria.

numDNSResponses

Indicates the number of DNS responses including this IP address meeting the DNS IP cache match criteria.

lastMatchTime(UTC)

Indicates the last time the IP address matched an app-filter with a server address DNS IP cache criteria.

numTimesMatched

Indicates the number of times the IP address matched an app-filter with a server address DNS IP cache.

domain

Indicates the domain as configured in dns-ip-cache.

hostname

Indicates the hostname as configured in dns-ip-cache.

new-ip-count

Indicates the number of new IP addresses added in the cache for the domain.

domain

domain

Syntax

domain [md-index | md-admin-name] [ association {ma-index | ma-admin-name | all-associations}] [detail]

Context

[Tree] (show>eth-cfm domain)

Full Context

show eth-cfm domain

Description

This command displays domain information.

Parameters

md-index

Specifies the index of the MD to which the MP is associated, or 0, if none.

Values

1 to 4294967295

md-admin-name

Specifies the administrative name for the domain, up to 64 characters.

ma-index

Specifies the index to which the MP is associated, or 0, if none.

Values

1 to 4294967295

ma-admin-name

Specifies the administrative name for the association, up to 64 characters.

all-associations

Keyword to display all associations to the MD.

detail

Keyword to isplay detailed domain information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following outputs are examples of ETH-CFM domain information.

Output Example
*A:node-1# show eth-cfm domain
===============================================================================
CFM Domain Table
===============================================================================
Md-index   Level Name                                       Format
    md-admin-name
-------------------------------------------------------------------------------
15         5                                                none
    level5-common
===============================================================================

*A:node-1# show eth-cfm domain level5-common detail
===============================================================================
Domain 15
Md-index          : 15                       Level             : 5
                                             MHF Creation      : defMHFnone
Name Format       : none                     Next Ma Index     : 1
Name              : (Not Specified)
Admin Name        : level5-common
Creation Origin   : manual
=============================================================================== 
Table 23. Output fields: ETH-CFM domain

Label

Description

Md-index

Displays the MD index value

Level

Displays an integer identifying the maintenance domain Level (MD Level)

Higher numbers correspond to higher maintenance domains (those with the greatest physical reach), with the highest values for customer CFM PDUs. Lower numbers correspond to lower maintenance domains (those with more limited physical reach), with the lowest values for CFM PDUs protecting single bridges or physical links.

Name

Displays a generic MD name

Format

Displays the type of the MD name

Values include dns, none, mac, and string

md-admin-name

Displays the administrative MD name

Output example — all associations
show eth-cfm domain all-associations
===============================================================================
CFM Association Table
===============================================================================
Md-index   Ma-index   Name                     Int  Hold  Bridge-id  MEPS TxSid
    md-admin-name
    ma-admin-name
    bridge-name
-------------------------------------------------------------------------------
10         100        vpls-100-0               1    n/a              1    no
    10
    100
    vpls-100

12         1000       vpls-100-1               1    n/a              4    yes
    12
    vpls-100-1
    vpls-100
===============================================================================
* indicates that the corresponding row element may have been truncated.  
Table 24. Output fields: ETH-CFM domain all-associations
Label Description
Md-index Displays the MD index value
Ma-index Displays the MA index value
Name Displays the generic MD name

Int

Displays the CCM transmission interval for all MEPs in the association

Hold

Displays the CCM hold time, in milliseconds, that is added before the defect condition is raised. A value of "n/a" indicates that the MEP is not subsecond and does not support the CCM hold time.

Bridge-id

Displays the bridge-identifier value for the domain association

MEPS

Displays the total local and remote maintenance association end point (MEP)

TxSid

Yes — the Sender ID TLV is included in the supported ETH-CFM PDUs

No — the Sender ID TLV is not included in the supported ETH-CFM PDUs

md-admin-name

Displays the administrative MD name

ma-admin-name

Displays the administrative MA name

bridge-name

Displays the administrative bridge-identifier name

domain

Syntax

domain [domain-name]

Context

[Tree] (show>router>firewall domain)

Full Context

show router firewall domain

Description

This command lists an overview of all firewall domains that are provisioned in the routing instance.

Configuring the domain-name parameter will display operational details for the specified firewall domain.

Parameters

domain-name

Specifies the name of a firewall domain, up to 32 characters maximum.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of firewall domain information.

Output Example
Node# show router 4 firewall domain
===============================================================================
Firewall domains
===============================================================================
Domain                           NAT-group  Admin-state
-------------------------------------------------------------------------------
demo_domain_01                   1          in-service
domain_slaac_4                   1          in-service
-------------------------------------------------------------------------------
No. of firewall domains: 2
===============================================================================


Node# show router 4 firewall domain "domain_slaac_4"
===============================================================================
Firewall domain "domain_slaac_4"
===============================================================================
ISA group                   : 1
Administrative state        : in-service
Last management change      : 01/23/2017 10:47:24
===============================================================================
===============================================================================
Firewall domain prefixes
===============================================================================
Prefix                                      Description
-------------------------------------------------------------------------------
2001:db8:5ffe::/32                          (Not Specified)
-------------------------------------------------------------------------------
No. of prefixes: 1
===============================================================================

domain

Syntax

domain ipsec-domain-id [now] auto

domain ipsec-domain-id [now] to router-id

Context

[Tree] (tools>perform>redundancy>multi-chassis>mc-ipsec>force-switchover domain)

Full Context

tools perform redundancy multi-chassis mc-ipsec force-switchover domain

Description

This command triggers an IPsec N:M switchover for the specified IPsec domain.

Parameters

ipsec-domain-id

Specifies the multi-chassis IPsec domain value.

Values

1 to 255

now

Specifies to switchover without confirmation.

auto

Automatically elects a new active node, excluding the current active node.

to router-id

Specifies the router ID of the new active node.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

dot1x

dot1x

Syntax

dot1x

Context

[Tree] (show>system>security dot1x)

Full Context

show system security dot1x

Description

This command displays IEEE 802.1X authentication information.

Platforms

All

downgrade

downgrade

Syntax

downgrade target-version target [reboot]

Context

[Tree] (tools>perform>persistence downgrade)

Full Context

tools perform persistence downgrade

Description

This command downgrades persistence files to a previous version.

Parameters

target

Specifies the downgrade version.

reboot

Specifies to reboot the system after a successful conversion.

Platforms

All

drain

drain

Syntax

[no] drain

Context

[Tree] (tools>perform>router>l2tp>group drain)

Full Context

tools perform router l2tp group drain

Description

This command triggers an attempt to drain a specified L2TP tunnel group.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

drain

Syntax

[no] drain

Context

[Tree] (tools>perform>router>l2tp>tunnel drain)

[Tree] (tools>perform>router>l2tp>group>tunnel drain)

Full Context

tools perform router l2tp tunnel drain

tools perform router l2tp group tunnel drain

Description

This command triggers an attempt to drain a specified L2TP tunnel.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

drain

Syntax

[no] drain

Context

[Tree] (tools>perform>router>l2tp>peer drain)

Full Context

tools perform router l2tp peer drain

Description

This command triggers an attempt to drain a specified L2TP peer.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

ds-lite-b4

ds-lite-b4

Syntax

dscp-table [value dscp-value]

Context

[Tree] (show>subscr-mgmt>vrgw>brg>gateway ds-lite-b4)

Full Context

show subscriber-mgmt vrgw brg gateway ds-lite-b4

Description

This command displays the DS-Lite B4 services of a gateway.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dscp-map

dscp-map

Syntax

dscp-map [dscp-name]

Context

[Tree] (show>router>sgt-qos dscp-map)

Full Context

show router sgt-qos dscp-map

Description

This command displays DSCP to FC mappings.

Parameters

dscp-name

Specifies the DSCP name.

Values

be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63

Platforms

All

Output

The following output is an example of DSCP mapping information.

Output Example
A:ALA-A# show router sgt-qos dscp-map 
===============================================================================
DSCP to FC Mappings
===============================================================================
DSCP Value          FC Value            Default FC Value
-------------------------------------------------------------------------------
be                  nc                  nc
cp1                 be                  be
cp2                 be                  be
cp3                 be                  be
cp4                 be                  be
cp5                 be                  be
cp6                 be                  be
cp7                 be                  be
cs1                 be                  be
cp9                 be                  be
af11                af                  af
cp11                be                  be
af12                af                  af
cp13                be                  be
af13                af                  af
cp15                be                  be
cs2                 be                  be
cp17                be                  be
af21                l1                  l1
cp19                be                  be
af22                l1                  l1
cp21                be                  be
af23                l1                  l1
cp23                be                  be
cs3                 be                  be
cp25                be                  be
af31                l1                  l1
cp27                be                  be
af32                l1                  l1
cp29                be                  be
af33                l1                  l1
cp31                be                  be
cs4                 be                  be
cp33                be                  be
af41                nc                  nc
cp35                be                  be
af42                h2                  h2
cp37                be                  be
af43                h2                  h2
cp39                be                  be
cs5                 be                  be
cp41                be                  be
cp42                be                  be
cp43                be                  be
cp44                be                  be
cp45                be                  be
ef                  ef                  ef
cp47                be                  be
nc1                 nc                  nc
cp49                be                  be
cp50                h2                  h2
cp51                be                  be
cp52                be                  be
cp53                be                  be
cp54                be                  be
cp55                be                  be
nc2                 nc                  nc
cp57                be                  be
cp58                be                  be
cp59                be                  be
cp60                be                  be
cp61                be                  be
cp62                be                  be
cp63                be                  be
===============================================================================
A:ALA-A#

dscp-table

dscp-table

Syntax

dscp-table [value dscp-value]

Context

[Tree] (show>qos dscp-table)

Full Context

show qos dscp-table

Description

This command displays the DSCP name-to-DSCP value mappings.

Parameters

value dscp-value

The specific DSCP value for which to display information.

Values

0 to 63

Default

Show all values

Platforms

All

Output

The following output is an example of dscp-table information, and Show QoS DSCP Table Output Fields describes the output fields.

Output Example
A:ALA-48# show qos dscp-table
===========================================================
DSCP Mapping
===========================================================
DSCP Name      DSCP Value     TOS (bin)      TOS (hex)
-----------------------------------------------------------
be             0              0000 0000      00
cp1            1              0000 0100      04
cp2            2              0000 1000      08
cp3            3              0000 1100      0C
cp4            4              0001 0000      10
cp5            5              0001 0100      14
cp6            6              0001 1000      18
cp7            7              0001 1100      1C
cs1            8              0010 0000      20
cp9            9              0010 0100      24
af11           10             0010 1000      28
cp11           11             0010 1100      2C
af12           12             0011 0000      30
cp13           13             0011 0100      34
af13           14             0011 1000      38
cp15           15             0011 1100      3C
cs2            16             0100 0000      40
cp17           17             0100 0100      44
af21           18             0100 1000      48
cp19           19             0100 1100      4C
af22           20             0101 0000      50
cp21           21             0101 0100      54
af23           22             0101 1000      58
cp23           23             0101 1100      5C
cs3            24             0110 0000      60
cp25           25             0110 0100      64
af31           26             0110 1000      68
cp27           27             0110 1100      6C
af32           28             0111 0000      70
cp29           29             0111 0100      74
af33           30             0111 1000      78
cp31           31             0111 1100      7C
cs4            32             1000 0000      80
cp33           33             1000 0100      84
af41           34             1000 1000      88
cp35           35             1000 1100      8C
af42           36             1001 0000      90
cp37           37             1001 0100      94
af43           38             1001 1000      98
cp39           39             1001 1100      9C
cs5            40             1010 0000      A0
cp41           41             1010 0100      A4
cp42           42             1010 1000      A8
cp43           43             1010 1100      AC
cp44           44             1011 0000      B0
cp45           45             1011 0100      B4
ef             46             1011 1000      B8
cp47           47             1011 1100      BC
nc1            48             1100 0000      C0
cp49           49             1100 0100      C4
cp50           50             1100 1000      C8
cp51           51             1100 1100      CC
cp52           52             1101 0000      D0
cp53           53             1101 0100      D4
cp54           54             1101 1000      D8
cp55           55             1101 1100      DC
nc2            56             1110 0000      E0
cp57           57             1110 0100      E4
cp58           58             1110 1000      E8
cp59           59             1110 1100      EC
cp60           60             1111 0000      F0
cp61           61             1111 0100      F4
cp62           62             1111 1000      F8
cp63           63             1111 1100      FC
===========================================================
A:ALA-48#


A:ALA-48# show qos dscp-table value 46
===========================================================
DSCP Mapping
===========================================================
DSCP Name      DSCP Value     TOS (bin)      TOS (hex)
-----------------------------------------------------------
ef             46             1011 1000      B8
===========================================================
A:ALA-48#
Table 25. Show QoS DSCP Table Output Fields

Label

Description

DSCP Name

Displays the name of the DiffServ code point to be associated with the forwarding class.

DSCP Value

Displays the DSCP values, between 0 and 63.

TOS (bin)

Displays the type of service in binary format.

TOS (hex)

Displays the type of service in hex format.

dslite-lsn-sub

dslite-lsn-sub

Syntax

dslite-lsn-sub router router-instance b4-address-prefix ipv6-prefix

Context

[Tree] (clear>nat dslite-lsn-sub)

Full Context

clear nat dslite-lsn-sub

Description

This command clears NAT mappings for Dual-Stack Lite (DS-Lite) LSN subscribers.

Parameters

router-instance

Specifies the router instance, up to 32 characters.

ipv6-prefix

Specifies the IPv6 prefix and length.

Values
  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

dump

dump

Syntax

dump

Context

[Tree] (tools dump)

Full Context

tools dump

Description

Commands in this context display troubleshooting information.

Platforms

All

duplicate

duplicate

Syntax

duplicate [ip-address]

Context

[Tree] (clear>service>id>proxy-arp duplicate)

Full Context

clear service id proxy-arp duplicate

Description

This command clears proxy-ARP duplicate entries.

Parameters

ip-address

Specifies the IP address.

Values

a.b.c.d

Platforms

All

duplicate

Syntax

duplicate [ipv6-address]

Context

[Tree] (clear>service>id>proxy-nd duplicate)

Full Context

clear service id proxy-nd duplicate

Description

This command clears proxy-ND duplicate entries.

Parameters

ipv6-address

Specifies the IPv6 address.

Values
  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF] H

  • d: [0 to 255] D

Platforms

All

dynamic

dynamic

Syntax

dynamic ip-address

Context

[Tree] (clear>service>id>proxy-arp dynamic)

Full Context

clear service id proxy-arp dynamic

Description

This command clears proxy-ARP dynamic entries.

Parameters

ip-address

Specifies the IP address.

Values

a.b.c.d

Platforms

All

dynamic

Syntax

dynamic ipv6-address

Context

[Tree] (clear>service>id>proxy-nd dynamic)

Full Context

clear service id proxy-nd dynamic

Description

This command clears proxy-ND dynamic entries.

Parameters

ipv6-address

Specifies the IPv6 address.

Values
  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF] H

  • d: [0 to 255] D

Platforms

All

dynamic-blocks

dynamic-blocks

Syntax

dynamic-blocks subscriber sub-ident-string [nat-policy policy-name]

Context

[Tree] (tools>dump>nat>l2-aware dynamic-blocks)

Full Context

tools dump nat l2-aware dynamic-blocks

Description

This command displays information about dynamic blocks.

Parameters

sub-ident-string

Specifies the subscriber identification string, up to 64 characters

policy-name

Specifies the NAT policy name, up to 32 characters

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of dynamic block information, and Dynamic Blocks Field Descriptions describes the output fields.

Output Example
/tools dump nat l2-aware dynamic-blocks subscriber "dynblocks sub"
===============================================================================
Dynamic blocks
===============================================================================
NAT policy                       Router Outside IP               Dynamic block
-------------------------------------------------------------------------------
dynblocks pol                    101    40.101.200.5             1049 - 1058
                                                                 1059 - 1068
Table 26. Dynamic Blocks Field Descriptions

Field

Description

NAT policy

The NAT policy name

Router

The router number

Outside IP

The outside IP address

Dynamic block

The dynamic block range

dynamic-resolve

dynamic-resolve

Syntax

dynamic-resolve all [force]

dynamic-resolve ip-address [force]

Context

[Tree] (tools>perform>service>id>proxy-arp dynamic-resolve)

Full Context

tools perform service id proxy-arp dynamic-resolve

Description

This command triggers the resolve procedure for dynamic IP entries. When executed, a resolve message (ARP-request) is issued for the requested IP or, if the all option used, for all the configured dynamic IPs.

The force option triggers the resolve process even for IPs with an existing entry in the proxy-ARP table.

Parameters

ip-address

Specifies the IP address.

Values

a.b.c.d

all

Runs the command for all configured dynamic IPs.

force

Issues a resolve message even when configured dynamic IP entries are present.

Platforms

All

dynamic-resolve

Syntax

dynamic-resolve all [force]

dynamic-resolve ipv6-address [force]

Context

[Tree] (tools>perform>service>id>proxy-nd dynamic-resolve)

Full Context

tools perform service id proxy-nd dynamic-resolve

Description

This command triggers the resolve procedure for dynamic IPv6 entries. When executed, a resolve message (Neighbor Solicitation) is issued for the requested IPv6 or, if the all option used, for all the configured dynamic IPv6s.The force option triggers the resolve process even for IPv6 addresses with an existing entry in the proxy-ARP table.

Parameters

ipv6-address

Specifies the IPv4 or IPv6 address.

Values

ip-address: a.b.c.d

ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

where:

x: [0 to FFFF]H

d: [0 to 255]D

all

Runs the command for all configured dynamic IPv6 addresses.

force

Issues a resolve message even when configured dynamic IP entries are present.

Platforms

All

dynamic-services

dynamic-services

Syntax

dynamic-services

Context

[Tree] (show>service dynamic-services)

[Tree] (show>service>id dynamic-services)

Full Context

show service dynamic-services

show service id dynamic-services

Description

Commands in this context show dynamic services information.

Note:

These commands are not available in the MD-CLI.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dynamic-services

Syntax

dynamic-services

Context

[Tree] (clear>service>id dynamic-services)

[Tree] (clear>service dynamic-services)

Full Context

clear service id dynamic-services

clear service dynamic-services

Description

Commands in this context clear dynamic services related data.

Note:

These commands are not available in the MD-CLI.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dynamic-services

Syntax

dynamic-services

Context

[Tree] (clear>service>stats dynamic-services)

Full Context

clear service statistics dynamic-services

Description

This command resets the dynamic services script statistics. See also show service dynamic services script statistics.

Note:

This command is not available in the MD-CLI.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dynamic-services

Syntax

dynamic-services command-list

Context

[Tree] (tools>dump>service dynamic-services)

Full Context

tools dump service dynamic-services

Description

This command displays the list of supported commands that can be used in dynamic service CLI scripts.

There are two types of CLI nodes in this list:

  • Pass through nodes: navigation is allowed but attributes creation or attribute changes are prohibited in this node.

  • Allowed nodes: navigation, attribute creation and attribute changes are allowed in this node.

Note:

These commands are not available in the MD-CLI.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

dynamic-services-policy

dynamic-services-policy

Syntax

dynamic-services-policy [policy-name]

Context

[Tree] (show>service>dynsvc dynamic-services-policy)

Full Context

show service dynamic-services dynamic-services-policy

Description

This command displays the dynamic services policy information.

Note:

This command is not available in the MD-CLI.

Parameters

policy-name

specifies for which dynamic services policy the information is requested.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of dynamic service policy information.

Output Example
# show service dynamic-services dynamic-services-policy "dynsvc-policy-1" 
===============================================================================
Dynamic Service Policies
===============================================================================
Dynamic Service Policy      : dynsvc-policy-1
-------------------------------------------------------------------------------
cli-user                    : (Not Specified)
description                 : Dynamic Services Policy 1
script-policy               : script-policy-5
sap-limit                   : 2000

Accounting instance 1
Stats type                  : volume-time
server policy               : aaa-server-policy-1
Update interval (minutes)   : 30
Update interval jitter      : 180s

Accounting instance 2
Stats type                  : time
server policy               : aaa-server-policy-2
Update interval (minutes)   : 0
Update interval jitter      : 10%
-------------------------------------------------------------------------------
No. of Services-policies: 1
=============================================================================== 

Dynamic Services Policy Field Descriptions describes the Dynamic Services policy fields.

Table 27. Dynamic Services Policy Field Descriptions

Output Field

Description

dynsrv-policy-name

The unique name of a dynamic services policy, up to 32 characters.

cli-user

The identifier name of the CLI user associated with this Dynamic Services policy.

script-policy

The identifier name of the script policy associated with this Dynamic Services policy.

sap-limit

The limit of the number of SAPs (Service Access Point) that can be created using this Dynamic Services policy.

Stats type

The value used to identify the type of accounting statistics gathered, either volume-time or time.

server policy

The identifier name of a RADIUS server policy to be used for accounting.

update interval (minutes)

The time interval between consecutive accounting updates when using this Dynamic Services policy.

update interval jitter

The amount of jitter to be applied on the update interval.

No. of Services-policies

The total number Dynamic Services policies.