Global commands
Global commands are used for operational functions, such as entering configuration sessions, navigating the CLI, executing OAM commands, and logging into remote hosts.
— back number
— bof
— exclusive
— private
— read-only
— configure
— exclusive
— global
— private
— read-only
— debug
— exclusive
— private
— read-only
— delete string
— edit-config
— bof
— debug
— exclusive
— global
— li
— private
— read-only
— enable
— exec string
— echo
— exit
— all
— history
— info keyword
— [cli-path] string
— converted
— detail
— differences
— flat
— full-context
— inheritance
— json
— model keyword
— units
— values
— xml
— li
— exclusive
— private
— read-only
— logout
— oam
— efm
— local-loopback
— [action] keyword
— port-id string
— remote-loopback
— [action] keyword
— port-id string
— eth-cfm
— eth-test
— data-length number
— [destination] (mac-unicast-address-no-zero | number)
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— priority number
— linktrace
— [destination] (mac-unicast-address-no-zero | number)
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— ttl number
— loopback
— [destination] (mac-unicast-address-no-zero | keyword | number)
— interval number
— lbm-padding number
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— priority number
— send-count number
— size number
— timeout number
— one-way-delay-test
— [destination] (mac-unicast-address-no-zero | number)
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— priority number
— two-way-delay-test
— [destination] (mac-unicast-address-no-zero | number)
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— priority number
— two-way-slm-test
— [destination] (mac-unicast-address-no-zero | number)
— interval (number | decimal-number)
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— priority number
— send-count number
— size number
— timeout number
— lsp-ping
— bgp-label
— fc keyword
— interface reference
— interval number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— ldp
— fc keyword
— interface reference
— interval number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— rsvp-te
— fc keyword
— interval number
— lsp-name reference
— path reference
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— sr-isis
— fc keyword
— igp-instance number
— interface reference
— interval number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— sr-ospf
— fc keyword
— igp-instance number
— interface reference
— interval number
— next-hop string
— path-destination string
— prefix (ipv4-prefix | ipv6-prefix)
— profile keyword
— send-count number
— size number
— source-ip-address string
— timeout number
— ttl number
— sr-ospf3
— fc keyword
— igp-instance number
— interface reference
— interval number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— sr-policy
— color number
— endpoint (ipv4-address-no-zone | ipv6-address-no-zone)
— fc keyword
— interface reference
— interval number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— profile keyword
— segment-list number
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— sr-te
— fc keyword
— interface reference
— interval number
— lsp-name reference
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— path reference
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— profile keyword
— send-count number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ttl number
— lsp-trace
— bgp-label
— downstream-map-tlv keyword
— fc keyword
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— ldp
— downstream-map-tlv keyword
— fc keyword
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— rsvp-te
— downstream-map-tlv keyword
— fc keyword
— interval number
— lsp-name reference
— max-fail number
— max-ttl number
— min-ttl number
— output-format keyword
— path reference
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— sr-isis
— downstream-map-tlv keyword
— fc keyword
— igp-instance number
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— sr-ospf
— downstream-map-tlv keyword
— fc keyword
— igp-instance number
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop string
— output-format keyword
— path-destination string
— prefix (ipv4-prefix | ipv6-prefix)
— probe-count number
— profile keyword
— size number
— source-ip-address string
— timeout number
— sr-ospf3
— downstream-map-tlv keyword
— fc keyword
— igp-instance number
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— prefix (ipv4-prefix | ipv6-prefix)
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— sr-policy
— color number
— downstream-map-tlv keyword
— endpoint (ipv4-address-no-zone | ipv6-address-no-zone)
— fc keyword
— interface reference
— interval number
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— probe-count number
— profile keyword
— segment-list number
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— sr-te
— downstream-map-tlv keyword
— fc keyword
— interface reference
— interval number
— lsp-name reference
— max-fail number
— max-ttl number
— min-ttl number
— next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— path reference
— path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
— probe-count number
— profile keyword
— size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— oam-pm
— action keyword
— session reference
— test-type keyword
— saa
— owner reference test reference
— start
— accounting boolean
— stop
— accounting boolean
— password
— ping
— bypass-routing
— count number
— [destination] (ipv4-address-with-zone | ipv6-address-with-zone | string-not-all-spaces)
— do-not-fragment
— fc keyword
— interface (reference | reference | reference | reference | reference)
— interval (number | decimal-number)
— next-hop-address (ipv4-address-no-zone | ipv6-address-no-zone)
— output-format keyword
— pattern (keyword | number)
— router-instance (reference | reference)
— size number
— source-address (ipv4-address-no-zone | ipv6-address-no-zone)
— subscriber string
— timeout number
— tos number
— ttl number
— pwc
— [path-type] keyword
— previous
— pyexec (string | reference)
— [argument-01] string
— [argument-02] string
— [argument-03] string
— [argument-04] string
— [argument-05] string
— [argument-06] string
— [argument-07] string
— [argument-08] string
— [argument-09] string
— [argument-10] string
— quit-config
— ssh
— [destination] (ipv4-address-with-zone | ipv6-address-with-zone | string-not-all-spaces)
— key-re-exchange
— mbytes (number | keyword)
— minutes (number | keyword)
— login-name string
— router-instance (reference | reference)
— telnet
— [destination] (ipv4-address-with-zone | ipv6-address-with-zone | string-not-all-spaces)
— port number
— router-instance (reference | reference)
— source-address (ipv4-address-no-zone | ipv6-address-no-zone)
— top
— traceroute
— color number
— decode keyword
— dest-port number
— dest-port-udp-fixed
— [destination] (ipv4-address-no-zone | ipv6-address-no-zone | string-not-all-spaces)
— detail
— endpoint string
— min-ttl number
— numeric
— probe-count number
— protocol keyword
— router-instance string
— segment-list number
— size number
— source-address (ipv4-address-no-zone | ipv6-address-no-zone)
— srv6-policy
— tos number
— ttl number
— wait number
— tree
— [cli-path] string
— detail
— flat
Global command descriptions
back [levels] number
[levels] number
bof
exclusive
private
read-only
configure
exclusive
global
private
read-only
debug
exclusive
private
read-only
delete [cli-path] string
[cli-path] string
edit-config
Synopsis | Enter a configuration mode | |
Context | edit-config | |
Tree | edit-config | |
Introduced | 16.0.R1 | |
Platforms | All |
bof
Synopsis | Enter the bof configuration context | |
Context | edit-config bof | |
Tree | bof | |
Introduced | 20.10.R1 | |
Platforms | All |
debug
Synopsis | Enter the debug configuration context | |
Context | edit-config debug | |
Tree | debug | |
Introduced | 21.5.R1 | |
Platforms | All |
exclusive
Synopsis | Enter exclusive configuration mode | |
Context | edit-config exclusive | |
Tree | exclusive | |
Introduced | 16.0.R1 | |
Platforms | All |
global
Synopsis | Enter global configuration mode | |
Context | edit-config global | |
Tree | global | |
Introduced | 16.0.R1 | |
Platforms | All |
li
Synopsis | Enter the li configuration context | |
Context | edit-config li | |
Tree | li | |
Introduced | 19.10.R1 | |
Platforms | All |
private
Synopsis | Enter private configuration mode | |
Context | edit-config private | |
Tree | private | |
Introduced | 16.0.R4 | |
Platforms | All |
read-only
Synopsis | Enter read-only configuration mode | |
Context | edit-config read-only | |
Tree | read-only | |
Introduced | 16.0.R1 | |
Platforms | All |
enable
exec [url] string
[url] string
echo
exit
all
history
info [from] keyword
[from] keyword
[cli-path] string
Synopsis | Absolute path or relative path from pwc | |
Context | info keyword [cli-path] string | |
Tree | [cli-path] | |
Introduced | 20.10.R1 | |
Platforms | All |
converted
Synopsis | Include converted third-party model configuration from the running datastore | |
Context | info keyword converted | |
Tree | converted | |
Description | This option specifies the inclusion of converted configuration values from third party models in the output and is only available when configure system management-interface yang-modules openconfig-modules is set to true. This option should only be used in the configure region when third party models are used. The output with this option is the same as info when used in other configuration regions. This option is not supported for state elements. | |
Introduced | 16.0.R1 | |
Platforms | All |
detail
differences
Synopsis | Show the different values each model tries to set | |
Context | info keyword differences | |
Tree | differences | |
Description | When specified, this command shows only the values that are different when multiple models set the same configuration element. | |
Notes | The following elements are part of a choice: differences, model, or values. | |
Introduced | 23.3.R1 | |
Platforms | All |
flat
full-context
Synopsis | Show the full context on each line | |
Context | info keyword full-context | |
Tree | full-context | |
Introduced | 16.0.R1 | |
Platforms | All |
inheritance
Synopsis | Include configuration inherited from configuration groups | |
Context | info keyword inheritance | |
Tree | inheritance | |
Description | This option specifies the inclusion of configuration inherited from configuration groups in the output. This option should only be used in the configure region when configuration groups are used. The output with this option is the same as info when used in other configuration regions. This option is not supported for state elements. | |
Introduced | 16.0.R1 | |
Platforms | All |
json
model keyword
Synopsis | Data model for which to display converted output | |
Context | info keyword model keyword | |
Tree | model | |
Description | This option specifies the data model for which to display the converted output. This option is only supported with the converted option and is only available when configure system management-interface yang-modules openconfig-modules is set to true. | |
Default | all | |
Options | ||
Notes | The following elements are part of a choice: differences, model, or values. | |
Introduced | 20.7.R1 | |
Platforms | All |
units
values
xml
li
exclusive
private
read-only
logout
oam
efm
local-loopback
Synopsis | Start or stop local loopback test on a port | |
Context | oam efm local-loopback | |
Tree | local-loopback | |
Introduced | 20.2.R1 | |
Platforms | All |
[action] keyword
Synopsis | Action type for the test | |
Context | oam efm local-loopback [action] keyword | |
Tree | [action] | |
Options | ||
Notes |
This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms |
All |
port-id string
Synopsis | Port ID for the test | |
Context | oam efm local-loopback port-id string | |
Tree | port-id | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
remote-loopback
Synopsis | Start or stop remote loopback test on a port | |
Context | oam efm remote-loopback | |
Tree | remote-loopback | |
Introduced | 20.2.R1 | |
Platforms | All |
[action] keyword
Synopsis | Action type for the test | |
Context | oam efm remote-loopback [action] keyword | |
Tree | [action] | |
Options | ||
Notes |
This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms |
All |
port-id string
Synopsis | Port ID for the test | |
Context | oam efm remote-loopback port-id string | |
Tree | port-id | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
eth-cfm
eth-test
data-length number
Synopsis | Size of the padding to be added to the frame | |
Context | oam eth-cfm eth-test data-length number | |
Tree | data-length | |
Range | 64 to 1500 | |
Default | 64 | |
Introduced | 20.2.R1 | |
Platforms |
All |
[destination] (mac-unicast-address-no-zero | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm eth-test [destination] (mac-unicast-address-no-zero | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm eth-test ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm eth-test md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
priority number
linktrace
[destination] (mac-unicast-address-no-zero | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm linktrace [destination] (mac-unicast-address-no-zero | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm linktrace ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm linktrace md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
ttl number
loopback
[destination] (mac-unicast-address-no-zero | keyword | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm loopback [destination] (mac-unicast-address-no-zero | keyword | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Options | ||
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
interval number
lbm-padding number
Synopsis | Data portion size of the data TLV, no octet string | |
Context | oam eth-cfm loopback lbm-padding number | |
Tree | lbm-padding | |
Description | This command specifies the size of the data portion of the data TLV which does not allow for an optional octet string. MSDU is not processed when setting is in use. A value of 0 means that no data TLV is added to the packet. This is specified with an octet string. This parameter and size are mutually exclusive. | |
Range | 0 | 3 to 9778 | |
Default | 0 | |
Introduced | 20.2.R1 | |
Platforms |
All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm loopback ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm loopback md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
priority number
send-count number
Synopsis | Number of loopback messages to send | |
Context | oam eth-cfm loopback send-count number | |
Tree | send-count | |
Range | 1 to 1024 | |
Default | 1 | |
Introduced | 20.2.R1 | |
Platforms |
All |
size number
Synopsis | Data portion size of the data TLV, octet string allowed | |
Context | oam eth-cfm loopback size number | |
Tree | size | |
Description | This command specifies the size of the data portion of the data TLV allowing for an optional octet string to be included. A value of 0 means that no data TLV is added to the packet. This parameter and lbm-padding are mutually exclusive. | |
Range | 0 to 1500 | |
Default | 0 | |
Units | bytes | |
Introduced | 20.2.R1 | |
Platforms | All |
timeout number
Synopsis | Wait time for a reply to a sent message request | |
Context | oam eth-cfm loopback timeout number | |
Tree | timeout | |
Description | This command specifies the time the router waits for a message reply after sending a message request. Upon expiration of the timeout, the router assumes that the message response is not received. Any response received after the timeout is silently discarded. | |
Range | 1 to 10 | |
Default | 5 | |
Units | seconds | |
Introduced | 20.2.R1 | |
Platforms | All |
one-way-delay-test
Synopsis | Initiate a one-way delay test | |
Context | oam eth-cfm one-way-delay-test | |
Tree | one-way-delay-test | |
Introduced | 20.2.R1 | |
Platforms | All |
[destination] (mac-unicast-address-no-zero | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm one-way-delay-test [destination] (mac-unicast-address-no-zero | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm one-way-delay-test ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm one-way-delay-test md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
Synopsis | Local Maintenance Association Endpoint (MEP) ID | |
Context | oam eth-cfm one-way-delay-test mep-id number | |
Tree | mep-id | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
priority number
Synopsis | Frame priority that can be manipulated by QoS policies | |
Context | oam eth-cfm one-way-delay-test priority number | |
Tree | priority | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 20.2.R1 | |
Platforms |
All |
two-way-delay-test
Synopsis | Initiate a two-way delay test | |
Context | oam eth-cfm two-way-delay-test | |
Tree | two-way-delay-test | |
Introduced | 20.2.R1 | |
Platforms | All |
[destination] (mac-unicast-address-no-zero | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm two-way-delay-test [destination] (mac-unicast-address-no-zero | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm two-way-delay-test ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm two-way-delay-test md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
Synopsis | Local Maintenance Association Endpoint (MEP) ID | |
Context | oam eth-cfm two-way-delay-test mep-id number | |
Tree | mep-id | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
priority number
Synopsis | Frame priority that can be manipulated by QoS policies | |
Context | oam eth-cfm two-way-delay-test priority number | |
Tree | priority | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 20.2.R1 | |
Platforms |
All |
two-way-slm-test
Synopsis | Initiate a two-way SLM test in SAA | |
Context | oam eth-cfm two-way-slm-test | |
Tree | two-way-slm-test | |
Introduced | 20.2.R1 | |
Platforms | All |
[destination] (mac-unicast-address-no-zero | number)
Synopsis | Destination MAC address or remote MEP ID of the peer | |
Context | oam eth-cfm two-way-slm-test [destination] (mac-unicast-address-no-zero | number) | |
Tree | [destination] | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
interval (number | decimal-number)
Synopsis | Time between probes within the test run | |
Context | oam eth-cfm two-way-slm-test interval (number | decimal-number) | |
Tree | interval | |
Range | 1 to 10 | |
Default | 5 | |
Units | seconds | |
Introduced | 20.2.R1 | |
Platforms | All |
ma-admin-name reference
Synopsis | Association name | |
Context | oam eth-cfm two-way-slm-test ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | state eth-cfm domain association string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
md-admin-name reference
Synopsis | Domain name | |
Context | oam eth-cfm two-way-slm-test md-admin-name reference | |
Tree | md-admin-name | |
Reference | state eth-cfm domain string | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
mep-id number
Synopsis | Local Maintenance Association Endpoint (MEP) ID | |
Context | oam eth-cfm two-way-slm-test mep-id number | |
Tree | mep-id | |
Range | 1 to 8191 | |
Notes | This element is mandatory. | |
Introduced | 20.2.R1 | |
Platforms | All |
priority number
Synopsis | Frame priority that can be manipulated by QoS policies | |
Context | oam eth-cfm two-way-slm-test priority number | |
Tree | priority | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 20.2.R1 | |
Platforms |
All |
send-count number
Synopsis | Number of two-way SLM test messages to send | |
Context | oam eth-cfm two-way-slm-test send-count number | |
Tree | send-count | |
Range | 1 to 1000 | |
Default | 1 | |
Introduced | 20.2.R1 | |
Platforms |
All |
size number
Synopsis | Data portion size of the data TLV, octet string allowed | |
Context | oam eth-cfm two-way-slm-test size number | |
Tree | size | |
Description | This command specifies the size of the data portion of the data TLV allowing for an optional octet string to be included. | |
Range | 0 to 1500 | |
Default | 0 | |
Units | bytes | |
Introduced | 20.2.R1 | |
Platforms | All |
timeout number
Synopsis | Wait time for a reply to a sent message request | |
Context | oam eth-cfm two-way-slm-test timeout number | |
Tree | timeout | |
Description | This command specifies the time the router waits for a message reply after sending a message request. Upon expiration of the timeout, the router assumes that the message response is not received. Any response received after the timeout is silently discarded. | |
Range | 1 to 10 | |
Default | 5 | |
Units | seconds | |
Introduced | 20.2.R1 | |
Platforms | All |
lsp-ping
bgp-label
fc keyword
interface reference
interval number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping bgp-label path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping bgp-label send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping bgp-label source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
ldp
fc keyword
interface reference
interval number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping ldp path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping ldp send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping ldp source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
rsvp-te
fc keyword
interval number
lsp-name reference
path reference
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping rsvp-te send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping rsvp-te source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
sr-isis
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-ISIS test | |
Context | oam lsp-ping sr-isis igp-instance number | |
Tree | igp-instance | |
Range | 0 to 127 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping sr-isis path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping sr-isis send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping sr-isis source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
sr-ospf
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-OSPF test | |
Context | oam lsp-ping sr-ospf igp-instance number | |
Tree | igp-instance | |
Range | 0 to 31 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
next-hop string
path-destination string
Synopsis | IP address of the path destination | |
Context | oam lsp-ping sr-ospf path-destination string | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping sr-ospf send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address string
Synopsis | Source IP address | |
Context | oam lsp-ping sr-ospf source-ip-address string | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
sr-ospf3
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-OSPFv3 test | |
Context | oam lsp-ping sr-ospf3 igp-instance number | |
Tree | igp-instance | |
Range | 0 to 31 | 64 to 95 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping sr-ospf3 path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping sr-ospf3 send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping sr-ospf3 source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
sr-policy
color number
endpoint (ipv4-address-no-zone | ipv6-address-no-zone)
fc keyword
interface reference
interval number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping sr-policy path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
profile keyword
segment-list number
Synopsis | Segment Routing segment list for the test | |
Context | oam lsp-ping sr-policy segment-list number | |
Tree | segment-list | |
Range | 1 to 32 | |
Introduced | 23.3.R1 | |
Platforms | All |
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping sr-policy send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping sr-policy source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
sr-te
fc keyword
interface reference
interval number
lsp-name reference
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
path reference
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-ping sr-te path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
profile keyword
send-count number
Synopsis | Number of echo request packets to send | |
Context | oam lsp-ping sr-te send-count number | |
Tree | send-count | |
Range | 1 to 100 | |
Default | 1 | |
Units | packets | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-ping sr-te source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ttl number
lsp-trace
bgp-label
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace bgp-label downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace bgp-label output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace bgp-label path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace bgp-label probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace bgp-label source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
ldp
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace ldp downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace ldp output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace ldp path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace ldp probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace ldp source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
rsvp-te
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace rsvp-te downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
interval number
lsp-name reference
max-fail number
max-ttl number
min-ttl number
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace rsvp-te output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path reference
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace rsvp-te probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace rsvp-te source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
sr-isis
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace sr-isis downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-ISIS test | |
Context | oam lsp-trace sr-isis igp-instance number | |
Tree | igp-instance | |
Range | 0 to 127 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace sr-isis output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace sr-isis path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace sr-isis probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace sr-isis source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
sr-ospf
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace sr-ospf downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-OSPF test | |
Context | oam lsp-trace sr-ospf igp-instance number | |
Tree | igp-instance | |
Range | 0 to 31 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop string
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace sr-ospf output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination string
Synopsis | IP address of the path destination | |
Context | oam lsp-trace sr-ospf path-destination string | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace sr-ospf probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address string
Synopsis | Source IP address | |
Context | oam lsp-trace sr-ospf source-ip-address string | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
sr-ospf3
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace sr-ospf3 downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
igp-instance number
Synopsis | IGP instance for the SR-OSPFv3 test | |
Context | oam lsp-trace sr-ospf3 igp-instance number | |
Tree | igp-instance | |
Range | 0 to 31 | 64 to 95 | |
Default | 0 | |
Introduced | 23.3.R1 | |
Platforms |
All |
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace sr-ospf3 output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace sr-ospf3 path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
prefix (ipv4-prefix | ipv6-prefix)
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace sr-ospf3 probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace sr-ospf3 source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
sr-policy
color number
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace sr-policy downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
endpoint (ipv4-address-no-zone | ipv6-address-no-zone)
fc keyword
interface reference
interval number
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace sr-policy output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace sr-policy path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace sr-policy probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
segment-list number
Synopsis | Segment Routing segment list for the test | |
Context | oam lsp-trace sr-policy segment-list number | |
Tree | segment-list | |
Range | 1 to 32 | |
Introduced | 23.3.R1 | |
Platforms | All |
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace sr-policy source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |
timeout number
sr-te
downstream-map-tlv keyword
Synopsis | Type of downstream mapping TLV in MPLS echo request PDU | |
Context | oam lsp-trace sr-te downstream-map-tlv keyword | |
Tree | downstream-map-tlv | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
fc keyword
interface reference
interval number
lsp-name reference
max-fail number
max-ttl number
min-ttl number
next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
output-format keyword
Synopsis | Output format for the result | |
Context | oam lsp-trace sr-te output-format keyword | |
Tree | output-format | |
Default | summary | |
Options | ||
Introduced | 23.3.R1 | |
Platforms | All |
path reference
path-destination (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | IP address of the path destination | |
Context | oam lsp-trace sr-te path-destination (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | path-destination | |
Introduced | 23.3.R1 | |
Platforms | All |
probe-count number
Synopsis | Number of OAM trace probes to send per TTL | |
Context | oam lsp-trace sr-te probe-count number | |
Tree | probe-count | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 23.3.R1 | |
Platforms |
All |
profile keyword
size number
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
Synopsis | Source IP address | |
Context | oam lsp-trace sr-te source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
Tree | source-ip-address | |
Introduced | 23.3.R1 | |
Platforms | All |