service commands
configure
— service
— apply-groups reference
— apply-groups-exclude reference
— cpipe string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— customer reference
— description string
— endpoint string
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time-active number
— revert-time (number | keyword)
— sap string
— accounting-policy reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cem
— packet
— jitter-buffer number
— payload-size number
— report-alarm
— buffer-overrun boolean
— buffer-underrun boolean
— malformed-packets boolean
— packet-loss boolean
— remote-fault boolean
— remote-packet-loss boolean
— remote-rdi boolean
— stray-packets boolean
— rtp-header boolean
— collect-stats boolean
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— rate number
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-egress
— overrides
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— endpoint reference
— ingress
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— overrides
— ip-criteria
— activate-entry-tag number
— ipv6-criteria
— activate-entry-tag number
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— lag
— multi-service-site reference
— service-id number
— service-mtu number
— spoke-sdp string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bandwidth (number | keyword)
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— control-word boolean
— description string
— egress
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— endpoint
— icb boolean
— name reference
— precedence (number | keyword)
— ingress
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— test boolean
— vc-switching boolean
— vc-type keyword
— vpn-id number
— customer string
— apply-groups reference
— apply-groups-exclude reference
— contact string
— customer-id number
— description string
— multi-service-site string
— apply-groups reference
— apply-groups-exclude reference
— assignment
— card number
— fpe reference
— port string
— description string
— egress
— agg-rate
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— policer-control-policy reference
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— ingress
— policer-control-policy reference
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— phone string
— epipe string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bgp number
— adv-service-mtu number
— apply-groups reference
— apply-groups-exclude reference
— pw-template-binding reference
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness boolean
— bfd-template reference
— endpoint reference
— import-rt string
— route-distinguisher (keyword | vpn-route-distinguisher)
— route-target
— export string
— import string
— vsi-export reference
— vsi-import reference
— bgp-evpn
— apply-groups reference
— apply-groups-exclude reference
— evi number
— local-attachment-circuit string
— apply-groups reference
— apply-groups-exclude reference
— endpoint reference
— eth-tag number
— mpls number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— auto-bind-tunnel
— allow-flex-algo-fallback boolean
— ecmp number
— enforce-strict-tunnel-tagging boolean
— resolution keyword
— resolution-filter
— bgp boolean
— ldp boolean
— mpls-fwd-policy boolean
— rib-api boolean
— rsvp boolean
— sr-isis boolean
— sr-ospf boolean
— sr-ospf3 boolean
— sr-policy boolean
— sr-te boolean
— udp boolean
— weighted-ecmp boolean
— control-word boolean
— default-route-tag string
— dynamic-egress-label-limit boolean
— ecmp number
— entropy-label boolean
— evi-three-byte-auto-rt boolean
— force-vc-forwarding keyword
— oper-group reference
— route-next-hop
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— system-ipv4
— system-ipv6
— send-tunnel-encap
— mpls boolean
— mpls-over-udp boolean
— remote-attachment-circuit string
— apply-groups reference
— apply-groups-exclude reference
— endpoint reference
— eth-tag number
— segment-routing-v6 number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— ecmp number
— evi-three-byte-auto-rt boolean
— force-vc-forwarding keyword
— oper-group reference
— resolution keyword
— route-next-hop
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— system-ipv4
— system-ipv6
— source-address string
— srv6
— default-locator string
— instance reference
— vxlan number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— ecmp number
— evi-three-byte-auto-rt boolean
— send-tunnel-encap boolean
— vxlan-instance reference
— bgp-mh-site string
— activation-timer number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— boot-timer number
— id number
— min-down-timer number
— preference number
— sap string
— bgp-vpws
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— local-ve
— id number
— name string
— remote-ve string
— apply-groups reference
— apply-groups-exclude reference
— id number
— customer reference
— description string
— endpoint string
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time-active number
— revert-time (number | keyword)
— standby-signaling keyword
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— ignore-l2vpn-mtu-mismatch boolean
— load-balancing
— lbl-eth-or-ip-l4-teid boolean
— per-service-hashing boolean
— nat-outside number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— oper-group reference
— pbb
— force-qtag-forwarding boolean
— local-switch-service-state keyword
— tunnel
— apply-groups reference
— apply-groups-exclude reference
— backbone-dest-mac string
— backbone-dest-mac-name reference
— backbone-vpls-service-name reference
— isid number
— sap string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— cflowd boolean
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— mac-monitoring
— policy-id reference
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— overrides
— hs-secondary-shaper string
— hs-wrr-group reference
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— endpoint reference
— eth-cfm
— ais boolean
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais
— client-meg-level number
— interface-support boolean
— interval number
— low-priority-defect keyword
— priority number
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— csf
— multiplier decimal-number
— description string
— direction keyword
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— lbm-svc-act-responder boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— primary-vlan boolean
— mip primary-vlan (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— cfm-vlan-tag string
— mac-address string
— squelch-ingress-ctag-levels number
— squelch-ingress-levels number
— ethernet
— llf
— admin-state keyword
— ignore-oper-down boolean
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— fp-redirect-group
— group-name reference
— instance number
— overrides
— ip-criteria
— activate-entry-tag number
— ipv6-criteria
— activate-entry-tag number
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— qtag-manipulation
— c-tag (number | keyword)
— push-dot1q-vlan (number | keyword)
— s-tag number
— l2tpv3-session
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— pseudo-wire
— ethernet
— ethernet-vlan-id number
— router
— group string
— router-instance string
— vc-id number
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— mc-ring
— apply-groups reference
— apply-groups-exclude reference
— ring-node string
— monitor-oper-group reference
— multi-service-site reference
— oper-group reference
— transit-policy
— ip reference
— prefix reference
— segment-routing-v6 number
— apply-groups reference
— apply-groups-exclude reference
— locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— end-dx2
— value number
— micro-segment-locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— udx2
— value number
— service-id number
— service-mtu number
— spoke-sdp string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— adv-service-mtu number
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth (number | keyword)
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— failure-action keyword
— wait-for-up-timer number
— collect-stats boolean
— control-word boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— mac-monitoring
— policy-id reference
— description string
— egress
— filter
— ip reference
— ipv6 reference
— mac reference
— l2tpv3
— cookie string
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— endpoint
— icb boolean
— name reference
— precedence (number | keyword)
— entropy-label
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais
— client-meg-level number
— interface-support boolean
— interval number
— low-priority-defect keyword
— priority number
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— csf
— multiplier decimal-number
— description string
— direction keyword
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— lbm-svc-act-responder boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— primary-vlan boolean
— mip primary-vlan (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— cfm-vlan-tag string
— mac-address string
— squelch-ingress-ctag-levels number
— squelch-ingress-levels number
— force-vc-forwarding keyword
— hash-label
— signal-capability
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— l2tpv3
— cookie
— cookie1 string
— cookie2 string
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— monitor-oper-group reference
— oper-group reference
— pw-status
— block-on-peer-fault boolean
— signaling boolean
— standby-signaling-slave boolean
— source-bmac
— use-sdp-bmac-lsb boolean
— transit-policy
— ip reference
— prefix reference
— vc-type keyword
— vlan-vc-tag number
— test boolean
— vc-switching boolean
— vpn-id number
— vxlan
— instance number
— apply-groups reference
— apply-groups-exclude reference
— egress-vtep
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— oper-group reference
— vni number
— source-vtep (ipv4-address-no-zone | ipv6-address-no-zone)
— ies string
— aa-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ip-mtu number
— ipv4
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— sap string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— egress
— filter
— ip reference
— qos
— sap-egress
— policy-name reference
— fwd-wholesale
— pppoe-service reference
— ingress
— qos
— sap-ingress
— overrides
— policy-name reference
— lag
— aarp-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ip-mtu number
— spoke-sdp string
— aarp
— id reference
— type keyword
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— egress
— filter
— ip reference
— vc-label number
— ingress
— filter
— ip reference
— vc-label number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— customer reference
— description string
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— igmp-host-tracking
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cflowd-parameters
— sampling keyword
— apply-groups reference
— apply-groups-exclude reference
— direction keyword
— sample-profile (keyword | number)
— type keyword
— cpu-protection reference
— description string
— dynamic-tunnel-redundant-nexthop string
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipv6
— down
— init-only boolean
— seconds number
— up
— seconds number
— if-attribute
— admin-group reference
— srlg-group reference
— ingress
— destination-class-lookup boolean
— policy-accounting reference
— ingress-stats boolean
— ip-mtu number
— ipsec
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ip-exception reference
— ipsec-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-designate boolean
— bfd-liveness
— dest-ip string
— interface string
— service-name string
— clear-df-bit boolean
— copy-traffic-class-upon-decapsulation boolean
— description string
— encapsulated-ip-mtu number
— icmp-generation
— frag-required
— admin-state keyword
— interval number
— message-count number
— icmp6-generation
— packet-too-big
— admin-state keyword
— interval number
— message-count number
— ip-mtu number
— key-exchange
— dynamic
— auto-establish boolean
— cert
— cert-profile reference
— status-verify
— default-result keyword
— primary keyword
— secondary keyword
— trust-anchor-profile reference
— id
— fqdn string
— ipv4 string
— ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
— ike-policy reference
— ipsec-transform reference
— pre-shared-key string
— manual
— keys number direction keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— encryption-key string
— ipsec-transform reference
— spi number
— local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone)
— max-history-key-records
— esp number
— ike number
— pmtu-discovery-aging number
— private-sap number
— private-service string
— private-tcp-mss-adjust number
— propagate-pmtu-v4 boolean
— propagate-pmtu-v6 boolean
— public-tcp-mss-adjust (number | keyword)
— remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— replay-window number
— security-policy
— id number
— strict-match boolean
— ipv6-exception reference
— public-sap number
— tunnel-group reference
— ipv4
— addresses
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— allow-directed-broadcasts boolean
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— gi-address string
— lease-populate
— max-leases number
— option-82
— action keyword
— circuit-id
— ascii-tuple
— ifindex
— none
— sap-id
— vlan-ascii-tuple
— remote-id
— ascii-string string
— mac
— none
— vendor-specific-option
— client-mac-address boolean
— pool-name boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-plain-bootp boolean
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— trusted boolean
— use-arp boolean
— icmp
— mask-reply boolean
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— ttl-expired
— admin-state keyword
— number number
— seconds number
— unreachables
— admin-state keyword
— number number
— seconds number
— ip-helper-address string
— local-dhcp-server reference
— neighbor-discovery
— host-route
— populate keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-unsolicited boolean
— limit
— log-only boolean
— max-entries number
— threshold number
— local-proxy-arp boolean
— populate boolean
— proactive-refresh boolean
— proxy-arp-policy reference
— remote-proxy-arp boolean
— retry-timer number
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— static-neighbor-unnumbered
— mac-address string
— timeout number
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— prefix-length number
— track-srrp number
— qos-route-lookup keyword
— secondary string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— igp-inhibit boolean
— prefix-length number
— track-srrp number
— tcp-mss number
— unnumbered
— ip-address string
— ip-int-name string
— system
— urpf-check
— ignore-default boolean
— mode keyword
— vrrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— backup string
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip string
— interface-name string
— service-name string
— init-delay number
— mac string
— master-int-inherit boolean
— message-interval number
— monitor-oper-group reference
— ntp-reply boolean
— oper-group reference
— owner boolean
— passive boolean
— ping-reply boolean
— policy reference
— preempt boolean
— priority number
— ssh-reply boolean
— standby-forwarding boolean
— telnet-reply boolean
— traceroute-reply boolean
— ipv6
— address string
— apply-groups reference
— apply-groups-exclude reference
— duplicate-address-detection boolean
— eui-64 boolean
— prefix-length number
— primary-preference number
— track-srrp number
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— relay
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— lease-populate
— max-nbr-of-leases number
— route-populate
— na boolean
— pd
— exclude boolean
— ta boolean
— link-address string
— neighbor-resolution boolean
— option
— apply-groups reference
— apply-groups-exclude reference
— interface-id
— ascii-tuple
— if-index
— sap-id
— string string
— remote-id boolean
— python-policy reference
— server string
— source-address string
— user-db reference
— server
— apply-groups reference
— apply-groups-exclude reference
— max-nbr-of-leases number
— prefix-delegation
— admin-state keyword
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— client-id
— duid string
— iaid number
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— duplicate-address-detection boolean
— forward-ipv4-packets boolean
— icmp6
— packet-too-big
— admin-state keyword
— number number
— seconds number
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— time-exceeded
— admin-state keyword
— number number
— seconds number
— unreachables
— admin-state keyword
— number number
— seconds number
— link-local-address
— address string
— duplicate-address-detection boolean
— local-dhcp-server reference
— neighbor-discovery
— host-route
— populate keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-unsolicited keyword
— limit
— log-only boolean
— max-entries number
— threshold number
— local-proxy-nd boolean
— proactive-refresh keyword
— proxy-nd-policy reference
— reachable-time number
— secure-nd
— admin-state keyword
— allow-unsecured-msgs boolean
— public-key-min-bits number
— security-parameter number
— stale-time number
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— qos-route-lookup keyword
— tcp-mss number
— urpf-check
— ignore-default boolean
— mode keyword
— vrrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— backup string
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— interface-name string
— service-name string
— init-delay number
— mac string
— master-int-inherit boolean
— message-interval number
— monitor-oper-group reference
— ntp-reply boolean
— oper-group reference
— owner boolean
— passive boolean
— ping-reply boolean
— policy reference
— preempt boolean
— priority number
— standby-forwarding boolean
— telnet-reply boolean
— traceroute-reply boolean
— load-balancing
— flow-label-load-balancing boolean
— ip-load-balancing keyword
— spi-load-balancing boolean
— teid-load-balancing boolean
— loopback boolean
— mac string
— mac-accounting boolean
— monitor-oper-group reference
— multi-chassis-shunting-profile reference
— multicast-network-domain reference
— ping-template
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— destination-address string
— name reference
— ptp-hw-assist
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— radius-auth-policy reference
— sap string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— anti-spoof keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— calling-station-id string
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— filter
— ip reference
— ipv6 reference
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— overrides
— hs-secondary-shaper string
— hs-wrr-group reference
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queue-group-redirect-list reference
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— fwd-wholesale
— pppoe-service reference
— host-admin-state keyword
— host-lockout-policy reference
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— fp-redirect-group
— group-name reference
— instance number
— overrides
— ip-criteria
— activate-entry-tag number
— ipv6-criteria
— activate-entry-tag number
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queue-group-redirect-list reference
— ip-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— clear-df-bit boolean
— delivery-service string
— description string
— dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— dscp keyword
— encapsulated-ip-mtu number
— gre-header
— admin-state keyword
— key
— admin-state keyword
— receive number
— send number
— icmp-generation
— frag-required
— admin-state keyword
— interval number
— message-count number
— icmp6-generation
— packet-too-big
— admin-state keyword
— number number
— seconds number
— ip-mtu number
— ipsec-transport-mode-profile reference
— local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— pmtu-discovery-aging number
— private-tcp-mss-adjust number
— propagate-pmtu-v4 boolean
— propagate-pmtu-v6 boolean
— public-tcp-mss-adjust (number | keyword)
— reassembly (number | keyword)
— remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— ipsec-gateway string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cert
— cert-profile reference
— status-verify
— default-result keyword
— primary keyword
— secondary keyword
— trust-anchor-profile reference
— client-db
— fallback boolean
— name reference
— default-secure-service
— interface string
— service-name string
— default-tunnel-template reference
— dhcp-address-assignment
— dhcpv4
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gi-address string
— send-release boolean
— server
— address string
— router-instance string
— dhcpv6
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— link-address string
— send-release boolean
— server
— address string
— router-instance string
— ike-policy reference
— local
— address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— dhcp-server string
— pool string
— router-instance string
— secondary-pool string
— ipv6
— dhcp-server string
— pool string
— router-instance string
— gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— id
— auto
— fqdn string
— ipv4 string
— ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
— max-history-key-records
— esp number
— ike number
— pre-shared-key string
— radius
— accounting-policy reference
— authentication-policy reference
— ts-list reference
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— multi-service-site reference
— static-host
— ipv4 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— transit-policy
— ip reference
— prefix reference
— shcv-policy-ipv4 reference
— spoke-sdp string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— failure-action keyword
— wait-for-up-timer number
— collect-stats boolean
— control-word boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— description string
— egress
— filter
— ip reference
— ipv6 reference
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— entropy-label
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— hash-label
— signal-capability
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— transit-policy
— ip reference
— prefix reference
— vc-type keyword
— static-tunnel-redundant-nexthop string
— tos-marking-state keyword
— tunnel boolean
— vas-if-type keyword
— vpls string
— apply-groups reference
— apply-groups-exclude reference
— egress
— reclassify-using-qos reference
— routed-override-filter
— ip reference
— ipv6 reference
— evpn
— arp
— advertise keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— flood-garp-and-unknown-req boolean
— learn-dynamic boolean
— nd
— advertise keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-dynamic boolean
— ingress
— routed-override-filter
— ip reference
— ipv6 reference
— redundant-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ip-mtu number
— ipv4
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— remote-ip string
— spoke-sdp string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— control-word boolean
— description string
— egress
— filter
— ip reference
— vc-label number
— ingress
— filter
— ip reference
— vc-label number
— service-id number
— subscriber-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— fwd-service reference
— fwd-subscriber-interface reference
— group-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bonding-parameters
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— connection number
— apply-groups reference
— apply-groups-exclude reference
— service string
— fpe reference
— multicast
— connection (number | keyword)
— brg
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authenticated-brg-only boolean
— default-brg-profile reference
— cflowd-parameters
— sampling keyword
— apply-groups reference
— apply-groups-exclude reference
— direction keyword
— sample-profile (keyword | number)
— type keyword
— data-trigger
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dynamic-routes-track-srrp
— hold-time number
— gtp-parameters
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— fpe reference
— gx-policy reference
— ingress
— policy-accounting reference
— ingress-stats boolean
— ip-mtu number
— ipoe-linking
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gratuitous-router-advertisement boolean
— shared-circuit-id boolean
— ipoe-session
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— force-auth
— cid-change boolean
— rid-change boolean
— ipoe-session-policy reference
— min-auth-interval (keyword | number)
— radius-session-timeout keyword
— sap-session-limit number
— session-limit number
— stateless-redundancy boolean
— user-db reference
— ipv4
— arp-host
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— host-limit number
— min-auth-interval number
— sap-host-limit number
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— client-applications
— dhcp boolean
— ppp boolean
— description string
— filter reference
— gi-address string
— lease-populate
— l2-header
— mac string
— max-leases number
— match-circuit-id boolean
— offer-selection
— client-mac
— discover-delay number
— mac-address keyword
— discover-delay number
— server string
— apply-groups reference
— apply-groups-exclude reference
— discover-delay number
— option-82
— action keyword
— circuit-id
— ascii-tuple
— ifindex
— none
— sap-id
— vlan-ascii-tuple
— remote-id
— ascii-string string
— mac
— none
— vendor-specific-option
— client-mac-address boolean
— pool-name boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— trusted boolean
— user-db reference
— icmp
— mask-reply boolean
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— ttl-expired
— admin-state keyword
— number number
— seconds number
— use-matching-address boolean
— unreachables
— admin-state keyword
— number number
— seconds number
— ignore-df-bit boolean
— neighbor-discovery
— local-proxy-arp boolean
— populate boolean
— proxy-arp-policy reference
— remote-proxy-arp boolean
— timeout number
— qos-route-lookup keyword
— urpf-check
— mode keyword
— ipv6
— allow-multiple-wan-addresses boolean
— auto-reply
— neighbor-solicitation boolean
— router-solicitation boolean
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— filter reference
— option
— apply-groups reference
— apply-groups-exclude reference
— interface-id
— ascii-tuple
— if-index
— sap-id
— string string
— remote-id boolean
— override-slaac boolean
— pd-managed-route
— next-hop keyword
— proxy-server
— admin-state keyword
— client-applications
— dhcp boolean
— ppp boolean
— preferred-lifetime (number | keyword)
— rebind-timer number
— renew-timer number
— server-id
— apply-groups reference
— apply-groups-exclude reference
— duid-en-ascii string
— duid-en-hex string
— duid-ll
— valid-lifetime (number | keyword)
— python-policy reference
— relay
— admin-state keyword
— advertise-selection
— client-mac
— mac-address keyword
— preference-option
— value number
— solicit-delay number
— preference-option
— value number
— server string
— apply-groups reference
— apply-groups-exclude reference
— preference-option
— value number
— solicit-delay number
— solicit-delay number
— client-applications
— dhcp boolean
— ppp boolean
— description string
— lease-split
— admin-state keyword
— valid-lifetime number
— link-address string
— server string
— source-address string
— snooping
— admin-state keyword
— user-db reference
— user-ident keyword
— ipoe-bridged-mode boolean
— neighbor-discovery
— apply-groups reference
— apply-groups-exclude reference
— dad-snooping boolean
— neighbor-limit number
— qos-route-lookup keyword
— router-advertisements
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— force-mcast keyword
— max-advertisement-interval number
— min-advertisement-interval number
— options
— current-hop-limit number
— dns
— include-rdnss boolean
— rdnss-lifetime (number | keyword)
— managed-configuration boolean
— mtu (number | keyword)
— other-stateful-configuration boolean
— reachable-time number
— retransmit-timer number
— router-lifetime (number | keyword)
— prefix-options
— autonomous boolean
— on-link boolean
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— router-solicit
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— inactivity-timer (number | keyword)
— min-auth-interval number
— user-db reference
— urpf-check
— mode keyword
— local-address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— client-applications
— ipoe boolean
— ppp boolean
— default-pool string
— server reference
— ipv6
— client-applications
— ipoe-slaac boolean
— ipoe-wan boolean
— ppp-slaac boolean
— server reference
— mac string
— nasreq-auth-policy reference
— oper-up-while-empty boolean
— pppoe
— admin-state keyword
— anti-spoof keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dhcp-client
— client-id keyword
— policy reference
— python-policy reference
— sap-session-limit number
— session-limit number
— user-db reference
— radius-auth-policy reference
— redundant-interface reference
— sap string
— accounting-policy reference
— admin-state keyword
— anti-spoof keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— calling-station-id string
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— default-host
— ipv4 reference prefix-length number
— apply-groups reference
— apply-groups-exclude reference
— next-hop string
— ipv6 string prefix-length number
— apply-groups reference
— apply-groups-exclude reference
— next-hop string
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— filter
— ip reference
— ipv6 reference
— qos
— policer-control-policy
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— policy-name reference
— scheduler-policy
— policy-name reference
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— fwd-wholesale
— pppoe-service reference
— host-admin-state keyword
— host-lockout-policy reference
— igmp-host-tracking
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— router-alert-check boolean
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— policy-name reference
— sap-ingress
— policy-name reference
— queuing-type keyword
— scheduler-policy
— policy-name reference
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— monitor-oper-group reference
— multi-service-site reference
— oper-group reference
— static-host
— ipv4 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— scope keyword
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— managed-route string
— apply-groups reference
— apply-groups-exclude reference
— cpe-check
— apply-groups reference
— apply-groups-exclude reference
— destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— drop-count number
— failed-action
— metric number
— preference number
— tag number
— withdraw boolean
— interval number
— log boolean
— padding-size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— metric number
— preference number
— tag number
— rip-policy reference
— shcv
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— ipv6 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— scope keyword
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— mac-linking string
— managed-route string
— apply-groups reference
— apply-groups-exclude reference
— cpe-check
— apply-groups reference
— apply-groups-exclude reference
— destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— drop-count number
— failed-action
— metric number
— preference number
— tag number
— withdraw boolean
— interval number
— log boolean
— padding-size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— metric number
— preference number
— tag number
— retail-svc-id number
— shcv
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— mac-learning
— data-triggered boolean
— single-mac boolean
— sub-sla-mgmt
— admin-state keyword
— defaults
— app-profile reference
— int-dest-id
— string string
— top-q-tag
— sla-profile reference
— sub-profile reference
— subscriber-id
— auto-id
— sap-id
— string string
— single-sub-parameters
— non-sub-traffic
— app-profile reference
— sla-profile reference
— sub-profile reference
— subscriber-id string
— profiled-traffic-only boolean
— sub-ident-policy reference
— subscriber-limit (keyword | number)
— sap-parameters
— anti-spoof keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— sub-sla-mgmt
— defaults
— app-profile reference
— sla-profile reference
— sub-profile reference
— subscriber-id
— auto-id
— string string
— sub-ident-policy reference
— shcv-policy reference
— shcv-policy-ipv4 reference
— shcv-policy-ipv6 reference
— srrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip string
— interface-name string
— service-name string
— description string
— gw-mac string
— keep-alive-interval number
— message-path reference
— monitor-oper-group
— group-name reference
— priority-step number
— one-garp-per-sap boolean
— policy reference
— preempt boolean
— priority number
— send-fib-population-packets keyword
— suppress-aa-sub boolean
— tos-marking-state keyword
— type keyword
— wlan-gw
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— purpose
— xconnect boolean
— gateway-router string
— group-encryption
— encryption-keygroup-inbound reference
— encryption-keygroup-outbound reference
— l2-ap
— access-point string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— encap-type keyword
— epipe-sap-template reference
— auto-sub-id-fmt keyword
— default-encap-type keyword
— lanext
— max-bd number
— learn-ap-mac
— delay-auth boolean
— mobility
— hold-time number
— inter-tunnel-type boolean
— inter-vlan boolean
— trigger
— control boolean
— data boolean
— iapp boolean
— oper-down-on-group-degrade boolean
— tcp-mss-adjust number
— tunnel-egress-qos
— admin-state keyword
— agg-rate-limit (number | keyword)
— granularity keyword
— hold-time (number | keyword)
— multi-client-only boolean
— qos reference
— scheduler-policy reference
— tunnel-encaps
— learn-l2tp-cookie (keyword | hex-string)
— vlan-range string
— apply-groups reference
— apply-groups-exclude reference
— authentication
— hold-time number
— local
— coa-policy reference
— default-ue-state keyword
— on-control-plane boolean
— policy reference
— vlan-mismatch-timeout number
— data-triggered-ue-creation
— admin-state keyword
— arp boolean
— create-proxy-cache-entry
— mac-format string
— proxy-server
— name string
— router-instance string
— ospf boolean
— dhcp4
— admin-state keyword
— dns string
— l2-aware-ip-address (ipv4-unicast-address | keyword)
— lease-time
— active number
— initial number
— nbns string
— dhcp6
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— preferred-lifetime
— active number
— initial number
— valid-lifetime
— active number
— initial number
— dsm
— accounting-policy reference
— accounting-update
— interval number
— admin-state keyword
— application-assurance
— accounting-statistics boolean
— profile reference
— url-parameter string
— apply-groups reference
— apply-groups-exclude reference
— egress
— policer reference
— ingress
— ip-filter reference
— policer reference
— soft-quota-exhausted-filter reference
— one-time-redirect
— port number
— url string
— volume-quota-direction keyword
— dynamic-service boolean
— extension string
— http-redirect-policy reference
— idle-timeout-action keyword
— l2-service
— admin-state keyword
— description string
— service reference
— nat-policy reference
— retail-service string
— slaac
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— preferred-lifetime
— active number
— initial number
— valid-lifetime
— active number
— initial number
— vrgw
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— brg
— authenticated-brg-only boolean
— default-brg-profile reference
— lanext
— access
— max-mac number
— multi-access boolean
— policer reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— assistive-address-resolution boolean
— bd-mac-prefix string
— mac-translation boolean
— network
— admin-state keyword
— max-mac number
— policer reference
— xconnect
— accounting
— mobility-updates boolean
— policy reference
— update-interval number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— wlan-gw-group reference
— wpp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— initial
— app-profile reference
— sla-profile reference
— sub-profile reference
— lease-time number
— portal
— name string
— portal-group reference
— router-instance string
— restore-to-initial-on-disconnect boolean
— triggered-hosts boolean
— user-db reference
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipv6
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipoe-linking
— apply-groups reference
— apply-groups-exclude reference
— gratuitous-router-advertisement boolean
— ipoe-session
— apply-groups reference
— apply-groups-exclude reference
— session-limit number
— ipv4
— address string
— apply-groups reference
— apply-groups-exclude reference
— gateway string
— holdup-time number
— populate-host-routes boolean
— prefix-length number
— track-srrp number
— allow-unmatching-subnets boolean
— default-dns string
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— client-applications
— dhcp boolean
— ppp boolean
— description string
— gi-address string
— lease-populate
— max-leases number
— option-82
— vendor-specific-option
— client-mac-address boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— virtual-subnet boolean
— export-host-routes boolean
— unnumbered
— ip-address string
— ip-int-name string
— ipv6
— address string
— apply-groups reference
— apply-groups-exclude reference
— host-type keyword
— prefix-length number
— allow-multiple-wan-addresses boolean
— allow-unmatching-prefixes boolean
— default-dns string
— delegated-prefix-length (number | keyword)
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— override-slaac boolean
— pd-managed-route
— next-hop keyword
— proxy-server
— admin-state keyword
— client-applications
— dhcp boolean
— ppp boolean
— preferred-lifetime (number | keyword)
— rebind-timer number
— renew-timer number
— server-id
— apply-groups reference
— apply-groups-exclude reference
— duid-en-ascii string
— duid-en-hex string
— duid-ll
— valid-lifetime (number | keyword)
— python-policy reference
— relay
— admin-state keyword
— client-applications
— dhcp boolean
— ppp boolean
— description string
— lease-split
— admin-state keyword
— valid-lifetime number
— link-address string
— server string
— source-address string
— ipoe-bridged-mode boolean
— link-local-address
— address string
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— holdup-time number
— host-type keyword
— track-srrp number
— router-advertisements
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— force-mcast keyword
— max-advertisement-interval number
— min-advertisement-interval number
— options
— current-hop-limit number
— dns
— include-rdnss boolean
— rdnss-lifetime (number | keyword)
— managed-configuration boolean
— mtu (number | keyword)
— other-stateful-configuration boolean
— reachable-time number
— retransmit-timer number
— router-lifetime (number | keyword)
— prefix-options
— autonomous boolean
— on-link boolean
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— router-solicit
— apply-groups reference
— apply-groups-exclude reference
— inactivity-timer (number | keyword)
— local-address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— client-applications
— ppp boolean
— default-pool string
— server reference
— ipv6
— client-applications
— ipoe-slaac boolean
— ipoe-wan boolean
— ppp-slaac boolean
— server reference
— pppoe
— apply-groups reference
— apply-groups-exclude reference
— description string
— session-limit number
— wan-mode keyword
— wlan-gw
— apply-groups reference
— apply-groups-exclude reference
— pool-manager
— apply-groups reference
— apply-groups-exclude reference
— dhcp6-client
— dhcpv4-nat
— admin-state keyword
— link-address string
— pool-name string
— ia-na
— admin-state keyword
— link-address string
— pool-name string
— lease-query
— max-retries number
— servers string
— slaac
— admin-state keyword
— link-address string
— pool-name string
— source-ip (keyword | ipv6-address)
— watermarks
— high number
— low number
— wlan-gw-group reference
— redundancy
— admin-state keyword
— export string
— monitor string
— subscriber-mgmt
— apply-groups reference
— apply-groups-exclude reference
— multi-chassis-shunt-id number
— up-resiliency
— monitor-oper-group reference
— apply-groups reference
— apply-groups-exclude reference
— health-drop number
— video-interface string
— accounting-policy reference
— address string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— channel string source string
— apply-groups reference
— apply-groups-exclude reference
— channel-name string
— description string
— scte35-action keyword
— zone-channel string zone-source string
— adi-channel-name string
— apply-groups reference
— apply-groups-exclude reference
— cpu-protection reference
— description string
— multicast-service number
— output-format keyword
— video-sap
— apply-groups reference
— apply-groups-exclude reference
— egress
— apply-groups reference
— apply-groups-exclude reference
— filter
— ip reference
— qos
— policy-name reference
— ingress
— apply-groups reference
— apply-groups-exclude reference
— filter
— ip reference
— qos
— policy-name reference
— video-group-id reference
— vpn-id number
— ipfix
— apply-groups reference
— apply-groups-exclude reference
— export-policy string
— apply-groups reference
— apply-groups-exclude reference
— collector router-instance string ip-address string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— mtu number
— refresh-timeout number
— source-ip-address string
— description string
— template-format keyword
— ipipe string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ce-address-discovery
— customer reference
— description string
— endpoint string
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time-active number
— revert-time (number | keyword)
— standby-signaling keyword
— sap string
— accounting-policy reference
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— ce-address (ipv4-address-no-zone | ipv6-address-no-zone)
— collect-stats boolean
— cpu-protection
— mac-monitoring
— policy-id reference
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— rate number
— filter
— ip reference
— ipv6 reference
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— overrides
— hs-secondary-shaper string
— hs-wrr-group reference
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— endpoint reference
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— fp-redirect-group
— group-name reference
— instance number
— overrides
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— mac string
— mac-refresh number
— multi-service-site reference
— transit-policy
— prefix reference
— use-broadcast-mac boolean
— service-id number
— service-mtu number
— spoke-sdp string
— aarp
— id reference
— type keyword
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth (number | keyword)
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— ce-address (ipv4-address-no-zone | ipv6-address-no-zone)
— control-word boolean
— description string
— egress
— filter
— ip reference
— ipv6 reference
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— endpoint
— name reference
— precedence (number | keyword)
— entropy-label
— hash-label
— signal-capability
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— transit-policy
— prefix reference
— vc-switching boolean
— vpn-id number
— mac-list string
— apply-groups reference
— apply-groups-exclude reference
— description string
— mac string
— apply-groups reference
— apply-groups-exclude reference
— mask string
— md-auto-id
— customer-id-range
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— pw-template-id-range
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— service-id-range
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— mrp
— policy string
— apply-groups reference
— apply-groups-exclude reference
— default-action keyword
— description string
— entry number
— action keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— isid number
— apply-groups reference
— apply-groups-exclude reference
— higher-value number
— scope keyword
— nat
— apply-groups reference
— apply-groups-exclude reference
— classifier string
— apply-groups reference
— apply-groups-exclude reference
— default
— action
— destination-nat
— ip-address string
— forward
— dnat-ip-address string
— description string
— entry number
— action
— destination-nat
— ip-address string
— forward
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dst-port-range
— end number
— start number
— foreign-ip-address string
— protocol keyword
— deterministic-script
— location string
— firewall-policy string
— alg
— ftp boolean
— rtsp boolean
— sip boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— domain
— name string
— router-instance string
— filtering keyword
— l2-outside
— port-limits
— forwarding number
— priority-sessions
— fc
— af boolean
— be boolean
— ef boolean
— h1 boolean
— h2 boolean
— l1 boolean
— l2 boolean
— nc boolean
— session-limits
— max number
— reserved number
— watermarks
— high number
— low number
— tcp
— mss-adjust number
— timeouts
— icmp6-query number
— sip number
— tcp
— established number
— rst number
— syn number
— time-wait number
— transitory number
— udp
— dns number
— initial number
— normal number
— unknown-protocol number
— udp
— inbound-refresh boolean
— unknown-protocols
— all
— protocol number
— map-t
— domain string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dmr-prefix string
— ip-fragmentation
— v6-frag-header boolean
— mapping-rule string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ea-length number
— ipv4-prefix string
— psid-offset number
— rule-prefix string
— mtu number
— tcp-mss-adjust number
— nat-policy string
— alg
— ftp boolean
— pptp boolean
— rtsp boolean
— sip boolean
— apply-groups reference
— apply-groups-exclude reference
— block-limit number
— description string
— dnat
— classifier reference
— dnat-only
— nat-group reference
— router-instance string
— wlan-gw-group reference
— filtering keyword
— flow-log-policy
— ipfix reference
— syslog reference
— l2-outside
— pool
— name string
— router-instance string
— port-forwarding-range-end number
— port-limits
— forwarding number
— reserved number
— watermarks
— high number
— low number
— priority-sessions
— fc
— af boolean
— be boolean
— ef boolean
— h1 boolean
— h2 boolean
— l1 boolean
— l2 boolean
— nc boolean
— session-limits
— max number
— reserved number
— watermarks
— high number
— low number
— tcp
— mss-adjust number
— reset-unknown boolean
— timeouts
— icmp-query number
— sip number
— subscriber-retention number
— tcp
— established number
— rst number
— syn number
— time-wait number
— transitory number
— udp
— dns number
— initial number
— normal number
— udp
— inbound-refresh boolean
— pcp-server-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— lifetime
— maximum number
— minimum number
— max-description-size number
— opcode
— announce boolean
— get boolean
— map boolean
— option
— description boolean
— next boolean
— port-reservation boolean
— port-set boolean
— prefer-failure boolean
— third-party boolean
— reuse-external-ip-address boolean
— version
— maximum number
— minimum number
— prefix-list string
— application keyword
— apply-groups reference
— apply-groups-exclude reference
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— nat-policy reference
— syslog
— export-policy string
— apply-groups reference
— apply-groups-exclude reference
— collector router-instance string ip-address string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— destination-port number
— ipv4-source-address string
— description string
— facility keyword
— include
— destination-ip boolean
— foreign-ip boolean
— foreign-port boolean
— nat-policy-name boolean
— sub-id boolean
— log-prefix string
— max-tx-delay number
— mtu number
— rate-limit number
— severity-level keyword
— up-nat-policy string
— alg
— ftp boolean
— pptp boolean
— rtsp boolean
— sip boolean
— apply-groups reference
— apply-groups-exclude reference
— block-limit number
— default-host
— inside-router-instance string
— ip-address string
— rate-limit number
— description string
— filtering keyword
— flow-log-policy
— ipfix reference
— icmp-echo-reply boolean
— port-block-extension
— ports number
— watermarks
— high number
— low number
— port-limits
— reserved number
— watermarks
— high number
— low number
— priority-sessions
— fc
— af boolean
— be boolean
— ef boolean
— h1 boolean
— h2 boolean
— l1 boolean
— l2 boolean
— nc boolean
— session-limits
— max number
— reserved number
— watermarks
— high number
— low number
— tcp
— mss-adjust number
— reset-unknown boolean
— timeouts
— icmp-query number
— sip number
— subscriber-retention number
— tcp
— established number
— rst number
— syn number
— time-wait number
— transitory number
— udp
— dns number
— initial number
— normal number
— udp
— inbound-refresh boolean
— oper-group string
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip string
— interface-name string
— router-instance string
— hold-time
— down number
— up number
— pbb
— apply-groups reference
— apply-groups-exclude reference
— mac string
— address string
— apply-groups reference
— apply-groups-exclude reference
— mac-notification
— apply-groups reference
— apply-groups-exclude reference
— count number
— interval number
— source-bmac
— address string
— evpn-etree-leaf-address string
— proxy-arp-nd
— mac-list
— list string
— apply-groups reference
— apply-groups-exclude reference
— mac string
— pw-template string
— accounting-policy number
— allow-fragmentation boolean
— apply-groups reference
— apply-groups-exclude reference
— auto-gre-sdp boolean
— block-on-peer-fault boolean
— collect-stats boolean
— control-word boolean
— egress
— filter
— ip string
— ipv6 string
— mac string
— mfib-allowed-mda-destinations
— mda string
— qos
— network
— policy-name string
— port-redirect-group
— group-name string
— instance number
— encryption-keygroup
— inbound number
— outbound number
— entropy-label
— fdb
— auto-learn-mac-protect boolean
— auto-learn-mac-protect-exclude-list string
— discard-unknown-source boolean
— limit-mac-move keyword
— mac-learning
— aging boolean
— learning boolean
— mac-pinning boolean
— maximum-mac-addresses number
— protected-src-mac-violation-action keyword
— force-vc-forwarding keyword
— hash-label
— signal-capability
— igmp-snooping
— fast-leave boolean
— import-policy string
— maximum-number-groups number
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— send-queries boolean
— version keyword
— ingress
— filter
— ip string
— ipv6 string
— mac string
— qos
— network
— fp-redirect-group
— group-name string
— instance number
— policy-name string
— l2pt
— termination
— protocols
— cdp boolean
— dtp boolean
— pagp boolean
— stp boolean
— udld boolean
— vtp boolean
— provisioned-sdp keyword
— pw-template-id number
— sdp-exclude reference
— sdp-include reference
— split-horizon-group
— description string
— fdb
— saps
— auto-learn-mac-protect boolean
— discard-unprotected-dest-mac boolean
— protected-src-mac-violation-action keyword
— name string
— stp
— admin-state keyword
— auto-edge boolean
— edge-port boolean
— link-type keyword
— path-cost number
— priority number
— root-guard boolean
— vc-type keyword
— vlan-vc-tag number
— sdp number
— accounting-policy reference
— admin-state keyword
— adv-mtu-override boolean
— allow-fragmentation boolean
— apply-groups reference
— apply-groups-exclude reference
— bgp-tunnel boolean
— booking-factor number
— class-forwarding
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-lsp reference
— enforce-diffserv-lsp-fc boolean
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— lsp reference
— multicast-lsp reference
— collect-stats boolean
— delivery-type keyword
— description string
— far-end
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— keep-alive
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— hello-time number
— hold-down-time number
— maximum-drop-count number
— message-length number
— timeout number
— ldp boolean
— local-end (ipv4-address-no-zone | ipv6-address-no-zone)
— lsp string
— metric number
— mixed-lsp-mode
— revert-time (number | keyword)
— network-domain reference
— path-mtu number
— pbb-etype string
— pw-port
— binding-port string
— sdp-group reference
— signaling keyword
— source-bmac-lsb
— control-pw-vc-id number
— value string
— sr-isis boolean
— sr-ospf boolean
— tunnel-far-end (ipv4-address-no-zone | ipv6-address-no-zone)
— vlan-vc-etype string
— weighted-ecmp boolean
— sdp-group
— apply-groups reference
— apply-groups-exclude reference
— group-name string
— apply-groups reference
— apply-groups-exclude reference
— value number
— system
— apply-groups reference
— apply-groups-exclude reference
— bgp
— evpn
— ad-per-es-route
— extended-evi-range boolean
— route-distinguisher-ip-address string
— route-target-type keyword
— ethernet-segment string
— ac-df-capability keyword
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— association
— lag reference
— apply-groups reference
— apply-groups-exclude reference
— virtual-ranges
— dot1q
— q-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— qinq
— s-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— s-tag-c-tag (number | keyword) c-tag-start (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— c-tag-end (number | keyword)
— network-interconnect-vxlan number
— apply-groups reference
— apply-groups-exclude reference
— virtual-ranges
— service-id number
— apply-groups reference
— apply-groups-exclude reference
— end number
— port reference
— apply-groups reference
— apply-groups-exclude reference
— virtual-ranges
— dot1q
— q-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— qinq
— s-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— s-tag-c-tag (number | keyword) c-tag-start (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— c-tag-end (number | keyword)
— pw-port reference
— apply-groups reference
— apply-groups-exclude reference
— pw-port-headend boolean
— virtual-ranges
— dot1q
— q-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— qinq
— s-tag (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— end (number | keyword)
— s-tag-c-tag (number | keyword) c-tag-start (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— c-tag-end (number | keyword)
— sdp reference
— apply-groups reference
— apply-groups-exclude reference
— virtual-ranges
— vc-id number
— apply-groups reference
— apply-groups-exclude reference
— end number
— vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— virtual-ranges
— evi number
— auto-esi keyword
— df-election
— es-activation-timer number
— manual
— evi number
— apply-groups reference
— apply-groups-exclude reference
— end number
— isid number
— apply-groups reference
— apply-groups-exclude reference
— end number
— preference
— apply-groups reference
— apply-groups-exclude reference
— mode keyword
— value number
— service-carving-mode keyword
— esi string
— multi-homing-mode keyword
— oper-group reference
— orig-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— pbb
— es-bmac-table-size number
— source-bmac-lsb string
— route-next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
— type keyword
— etree-leaf-label boolean
— etree-leaf-label-value (number | keyword)
— ip-prefix-routes
— d-path-length-ignore boolean
— iff-attribute-uniform-propagation boolean
— iff-bgp-path-selection boolean
— multicast-leave-sync-propagation number
— route-distinguisher string
— bgp-auto-rd-range
— apply-groups reference
— apply-groups-exclude reference
— community-value
— end number
— start number
— ip-address string
— extended-default-qinq-sap-lookup boolean
— fdb
— apply-groups reference
— apply-groups-exclude reference
— table-size number
— gre-eth-bridged
— tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— fpe-id reference
— pw-port-list
— port string
— vpn-gre-source-ip string
— vxlan
— assisted-replication
— apply-groups reference
— apply-groups-exclude reference
— ip-address string
— tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— fpe-id reference
— template
— epipe-sap-template string
— apply-groups reference
— apply-groups-exclude reference
— egress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— policy-name reference
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— policy-name reference
— queuing-type keyword
— upnp
— policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— mapping-limit number
— port number
— strict-mode boolean
— vpls string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bgp number
— adv-service-mtu number
— apply-groups reference
— apply-groups-exclude reference
— pw-template-binding reference
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness boolean
— bfd-template reference
— import-rt string
— monitor-oper-group reference
— oper-group reference
— split-horizon-group string
— route-distinguisher (keyword | vpn-route-distinguisher)
— route-target
— export string
— import string
— vsi-export reference
— vsi-import reference
— bgp-ad
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— vpls-id string
— vsi-id-prefix string
— bgp-evpn
— accept-ivpls-evpn-flush boolean
— apply-groups reference
— apply-groups-exclude reference
— evi number
— ignore-mtu-mismatch boolean
— incl-mcast-orig-ip string
— isid-route-target
— range number
— apply-groups reference
— apply-groups-exclude reference
— end number
— route-target string
— type keyword
— mac-duplication
— blackhole boolean
— detect
— num-moves number
— trusted-mac-move-factor number
— window number
— retry (number | keyword)
— trusted-mac-time number
— mpls number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— auto-bind-tunnel
— allow-flex-algo-fallback boolean
— ecmp number
— enforce-strict-tunnel-tagging boolean
— resolution keyword
— resolution-filter
— bgp boolean
— ldp boolean
— mpls-fwd-policy boolean
— rib-api boolean
— rsvp boolean
— sr-isis boolean
— sr-ospf boolean
— sr-ospf3 boolean
— sr-policy boolean
— sr-te boolean
— udp boolean
— weighted-ecmp boolean
— control-word boolean
— default-route-tag string
— dynamic-egress-label-limit boolean
— ecmp number
— entropy-label boolean
— evi-three-byte-auto-rt boolean
— fdb
— protected-src-mac-violation-action keyword
— force-vc-forwarding keyword
— ingress-replication-bum-label boolean
— mh-mode keyword
— oper-group reference
— route-next-hop
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— system-ipv4
— system-ipv6
— send-tunnel-encap
— mpls boolean
— mpls-over-udp boolean
— split-horizon-group reference
— routes
— incl-mcast
— advertise-ingress-replication boolean
— advertise-l2-attributes boolean
— ip-prefix
— advertise boolean
— domain-id string
— include-direct-interface-host boolean
— link-bandwidth
— advertise
— max-dynamic-weight number
— weight (number | keyword)
— weighted-ecmp boolean
— mac-ip
— advertise boolean
— arp-nd-extended-community boolean
— cfm-mac boolean
— unknown-mac boolean
— sel-mcast
— advertise boolean
— segment-routing-v6 number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— ecmp number
— evi-three-byte-auto-rt boolean
— fdb
— protected-src-mac-violation-action keyword
— force-vc-forwarding keyword
— mh-mode keyword
— oper-group reference
— resolution keyword
— route-next-hop
— ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— system-ipv4
— system-ipv6
— source-address string
— split-horizon-group reference
— srv6
— default-locator string
— instance reference
— vxlan number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— ecmp number
— evi-three-byte-auto-rt boolean
— mh-mode keyword
— oper-group reference
— routes
— auto-disc
— advertise boolean
— send-incl-mcast-ir-on-ndf boolean
— send-tunnel-encap boolean
— vxlan-instance reference
— bgp-mh-site string
— activation-timer number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— boot-timer number
— failed-threshold (number | keyword)
— id number
— mesh-sdp-binds
— min-down-timer number
— monitor-oper-group reference
— sap string
— shg-name string
— spoke-sdp string
— bgp-vpls
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— maximum-ve-id number
— ve
— id number
— name string
— capture-sap string
— admin-state keyword
— allow-dot1q-msaps boolean
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— cpu-protection
— mac-monitoring
— policy-id reference
— description string
— dhcp
— python-policy reference
— user-db reference
— dhcp6
— python-policy reference
— user-db reference
— dist-cpu-protection reference
— host-lockout-policy reference
— ingress
— filter
— mac reference
— ipoe-session
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ipoe-session-policy reference
— user-db reference
— msap-defaults
— group-interface string
— policy reference
— service-name string
— nasreq-auth-policy reference
— pfcp
— apply-groups reference
— apply-groups-exclude reference
— association reference
— l2-access-id-alias string
— up-resiliency
— monitor-oper-group reference
— apply-groups reference
— apply-groups-exclude reference
— health-drop number
— pppoe
— policy reference
— python-policy reference
— user-db reference
— radius-auth-policy reference
— router-solicit
— user-db reference
— track-srrp number
— trigger-packet
— arp boolean
— data boolean
— dhcp boolean
— dhcp6 boolean
— pppoe boolean
— rtr-solicit boolean
— customer reference
— description string
— endpoint string
— apply-groups reference
— apply-groups-exclude reference
— block-on-mesh-failure boolean
— description string
— fdb
— auto-learn-mac-protect boolean
— mac-pinning boolean
— maximum-mac-addresses number
— protected-src-mac-violation-action keyword
— ignore-standby-signaling boolean
— mc-endpoint number
— apply-groups reference
— apply-groups-exclude reference
— mc-ep-peer
— name string
— peer-address reference
— revert-time (number | keyword)
— suppress-standby-signaling boolean
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— etree boolean
— fdb
— discard-unknown boolean
— mac-learning
— aging boolean
— learning boolean
— local-age-time number
— remote-age-time number
— mac-move
— admin-state keyword
— hold-down-time number
— move-frequency number
— primary-cumulative-factor number
— retry-count (number | keyword)
— sap reference
— apply-groups reference
— apply-groups-exclude reference
— level keyword
— secondary-cumulative-factor number
— spoke-sdp reference
— apply-groups reference
— apply-groups-exclude reference
— level keyword
— mac-subnet-length number
— selective-learning boolean
— static-mac
— mac string
— apply-groups reference
— apply-groups-exclude reference
— blackhole
— endpoint reference
— mesh-sdp reference
— monitor keyword
— sap reference
— spoke-sdp reference
— table
— high-wmark number
— low-wmark number
— size number
— gsmp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— group string
— admin-state keyword
— ancp
— dynamic-topology-discovery boolean
— oam boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-multiplier number
— idle-filter boolean
— keepalive number
— neighbor string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— local-address string
— priority-marking
— dscp keyword
— prec number
— persistency boolean
— igmp-host-tracking
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— igmp-snooping
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— evpn-proxy
— admin-state keyword
— mvr
— admin-state keyword
— description string
— group-policy string
— query-interval number
— query-source-address (keyword | ipv4-address)
— report-source-address string
— robust-count number
— ignore-l2vpn-mtu-mismatch boolean
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipv4
— neighbor-discovery
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— timeout number
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— mac string
— isid-policy
— entry number
— advertise-local boolean
— apply-groups reference
— apply-groups-exclude reference
— range
— end number
— start number
— use-def-mcast boolean
— load-balancing
— lbl-eth-or-ip-l4-teid boolean
— per-service-hashing boolean
— spi-load-balancing boolean
— teid-load-balancing boolean
— m-vpls boolean
— mac-flush
— tldp
— propagate boolean
— send-on-failure boolean
— mac-protect
— mac string
— mcast-ipv6-snooping-scope keyword
— mcr-default-gtw
— apply-groups reference
— apply-groups-exclude reference
— ip string
— mac string
— mesh-sdp string
— accounting-policy reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— collect-stats boolean
— control-word boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— mac-monitoring
— policy-id reference
— description string
— dhcp
— apply-groups reference
— apply-groups-exclude reference
— description string
— snoop boolean
— egress
— filter
— ip reference
— ipv6 reference
— mac reference
— mfib-allowed-mda-destinations
— mda string
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— entropy-label
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais
— client-meg-level number
— interface-support boolean
— interval number
— low-priority-defect keyword
— priority number
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— csf
— multiplier decimal-number
— description string
— direction keyword
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— lbm-svc-act-responder boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— primary-vlan boolean
— mip primary-vlan (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— cfm-vlan-tag string
— mac-address string
— squelch-ingress-ctag-levels number
— squelch-ingress-levels number
— vmep-filter boolean
— etree-leaf boolean
— etree-root-leaf-tag boolean
— fdb
— auto-learn-mac-protect boolean
— auto-learn-mac-protect-exclude-list reference
— mac-pinning boolean
— protected-src-mac-violation-action keyword
— force-vc-forwarding keyword
— hash-label
— signal-capability
— igmp-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— mrouter-port boolean
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— mld-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-groups number
— mrouter-port boolean
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— mrp
— apply-groups reference
— apply-groups-exclude reference
— join-time number
— leave-all-time number
— leave-time number
— periodic-time number
— periodic-timer boolean
— policy reference
— pbb
— fault-propagation
— backbone-mac-address string
— backbone-mac-name reference
— vc-type keyword
— vlan-vc-tag number
— mfib
— table
— high-wmark number
— low-wmark number
— size number
— mld-snooping
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— evpn-proxy
— admin-state keyword
— mvr
— admin-state keyword
— description string
— group-policy string
— query-interval number
— query-source-address (keyword | ipv6-address)
— report-source-address string
— robust-count number
— mrp
— admin-state keyword
— mmrp
— admin-state keyword
— attribute-table
— high-wmark number
— low-wmark number
— size number
— end-station-only boolean
— flood-time number
— multicast-info-policy reference
— pbb
— backbone-vpls reference
— apply-groups reference
— apply-groups-exclude reference
— fdb
— protected-src-mac-violation-action keyword
— igmp-snooping
— mrouter-destination reference
— isid number
— mesh-sdp reference
— apply-groups reference
— apply-groups-exclude reference
— igmp-snooping
— mrouter-port boolean
— mld-snooping
— mrouter-port boolean
— mld-snooping
— mrouter-destination reference
— sap reference
— apply-groups reference
— apply-groups-exclude reference
— igmp-snooping
— mrouter-port boolean
— mld-snooping
— mrouter-port boolean
— spoke-sdp reference
— apply-groups reference
— apply-groups-exclude reference
— igmp-snooping
— mrouter-port boolean
— mld-snooping
— mrouter-port boolean
— force-qtag-forwarding boolean
— i-vpls-mac-flush
— bgp-evpn
— send-to-bvpls boolean
— tldp
— propagate-from-bvpls boolean
— send-on-bvpls-failure boolean
— send-to-bvpls
— all-but-mine boolean
— all-from-me boolean
— mac-notification
— admin-state keyword
— count number
— interval number
— renotify (number | keyword)
— source-bmac
— address string
— use-es-bmac-lsb boolean
— use-mclag-bmac-lsb boolean
— pbb-type keyword
— pim-snooping
— apply-groups reference
— apply-groups-exclude reference
— group-policy string
— hold-time number
— ipv4
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv6
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— provider-tunnel
— apply-groups reference
— apply-groups-exclude reference
— inclusive
— admin-state keyword
— data-delay-interval number
— mldp
— owner keyword
— root-and-leaf boolean
— rsvp
— lsp-template reference
— selective
— admin-state keyword
— data-delay-interval number
— data-threshold
— group-prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— pe-threshold-add number
— pe-threshold-delete number
— threshold number
— maximum-p2mp-spmsi number
— mldp boolean
— owner keyword
— wildcard-spmsi boolean
— proxy-arp
— admin-state keyword
— age-time (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— duplicate-detect
— anti-spoof-mac string
— hold-down-time (number | keyword)
— num-moves number
— static-blackhole boolean
— window number
— dynamic-arp
— ip-address string
— apply-groups reference
— apply-groups-exclude reference
— mac-list reference
— resolve-retry-time number
— dynamic-populate boolean
— evpn
— flood
— gratuitous-arp boolean
— unknown-arp-req boolean
— route-tag number
— process-arp-probes boolean
— send-refresh (number | keyword)
— static-arp
— ip-address string
— apply-groups reference
— apply-groups-exclude reference
— mac string
— table-size number
— proxy-nd
— admin-state keyword
— age-time (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— duplicate-detect
— anti-spoof-mac string
— hold-down-time (number | keyword)
— num-moves number
— static-blackhole boolean
— window number
— dynamic-neighbor
— ip-address string
— apply-groups reference
— apply-groups-exclude reference
— mac-list reference
— resolve-retry-time number
— dynamic-populate boolean
— evpn
— advertise-neighbor-type keyword
— flood
— unknown-neighbor-advertise-host boolean
— unknown-neighbor-advertise-router boolean
— unknown-neighbor-solicitation boolean
— route-tag number
— process-dad-neighbor-solicitations boolean
— send-refresh (number | keyword)
— static-neighbor
— ip-address string
— apply-groups reference
— apply-groups-exclude reference
— mac string
— type keyword
— table-size number
— routed-vpls
— evpn-mpls-ecmp boolean
— multicast
— apply-groups reference
— apply-groups-exclude reference
— evpn-gateway
— admin-state keyword
— advertise keyword
— apply-groups reference
— apply-groups-exclude reference
— dr-activation-timer number
— non-dr-attract-traffic keyword
— ip-multicast-ecmp boolean
— ipv4
— forward-to-ip-interface boolean
— igmp-snooping
— mrouter-port boolean
— ipv6
— forward-to-ip-interface boolean
— mld-snooping
— mrouter-port boolean
— vxlan-ipv4-tep-ecmp boolean
— sap string
— accounting-policy reference
— admin-state keyword
— anti-spoof keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— arp-host
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— host-limit number
— min-auth-interval number
— arp-reply-agent keyword
— bandwidth number
— bgp-vpls-mh-veid number
— bpdu-translation keyword
— calling-station-id string
— cflowd boolean
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— mac-monitoring
— policy-id reference
— description string
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— lease-populate
— max-leases number
— option-82
— action keyword
— circuit-id
— ascii-tuple
— hex-string string
— none
— vlan-ascii-tuple
— remote-id
— ascii-string string
— hex-string string
— mac
— none
— vendor-specific-option
— client-mac-address boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— snoop boolean
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— dest-mac-rewrite string
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— overrides
— hs-secondary-shaper string
— hs-wrr-group reference
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais
— client-meg-level number
— interface-support boolean
— interval number
— low-priority-defect keyword
— priority number
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— csf
— multiplier decimal-number
— description string
— direction keyword
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— lbm-svc-act-responder boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— primary-vlan boolean
— mip primary-vlan (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— cfm-vlan-tag string
— mac-address string
— squelch-ingress-ctag-levels number
— squelch-ingress-levels number
— vmep-filter boolean
— eth-ring number
— etree-leaf boolean
— etree-root-leaf-tag
— leaf number
— fdb
— auto-learn-mac-protect boolean
— auto-learn-mac-protect-exclude-list reference
— discard-unknown-source boolean
— discard-unprotected-dest-mac boolean
— limit-mac-move keyword
— mac-learning
— aging boolean
— learning boolean
— mac-pinning boolean
— maximum-mac-addresses number
— protected-src-mac-violation-action keyword
— host-admin-state keyword
— host-lockout-policy reference
— i-vpls-mac-flush
— bgp-evpn
— send-to-bvpls boolean
— igmp-host-tracking
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— router-alert-check boolean
— igmp-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— mc-constraints
— level number
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— number-down number
— apply-groups reference
— apply-groups-exclude reference
— level number
— use-lag-port-weight boolean
— policy reference
— mrouter-port boolean
— mvr
— from-vpls reference
— to-sap string
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— fp-redirect-group
— group-name reference
— instance number
— overrides
— ip-criteria
— activate-entry-tag number
— ipv6-criteria
— activate-entry-tag number
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— qtag-manipulation
— c-tag (number | keyword)
— push-dot1q-vlan (number | keyword)
— s-tag number
— l2pt
— force-boundary
— protocols
— cdp boolean
— dtp boolean
— pagp boolean
— stp boolean
— udld boolean
— vtp boolean
— termination
— protocols
— cdp boolean
— dtp boolean
— pagp boolean
— stp boolean
— udld boolean
— vtp boolean
— l2tpv3-session
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— pseudo-wire
— ethernet
— ethernet-vlan-id number
— router
— group string
— router-instance string
— vc-id number
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— managed-vlan-list
— range string
— mc-ring
— apply-groups reference
— apply-groups-exclude reference
— ring-node string
— mld-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-groups number
— mrouter-port boolean
— mvr
— from-vpls reference
— to-sap string
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— monitor-oper-group reference
— mrp
— join-time number
— leave-all-time number
— leave-time number
— periodic-time number
— periodic-timer boolean
— policy reference
— multi-service-site reference
— oper-group reference
— pbb
— fault-propagation
— backbone-mac-address string
— backbone-mac-name reference
— pim-snooping
— apply-groups reference
— apply-groups-exclude reference
— maximum-number-groups number
— process-cpm-traffic-on-sap-down boolean
— radius-auth-policy reference
— shcv-policy-ipv4 reference
— spb
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— level number
— apply-groups reference
— apply-groups-exclude reference
— hello-interval number
— hello-multiplier number
— metric number
— lsp-pacing-interval number
— retransmit-interval number
— split-horizon-group reference
— static-host
— ipv4 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— shcv
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— static-isid
— range number
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— stp
— admin-state keyword
— auto-edge boolean
— edge-port boolean
— link-type keyword
— mst-instance number
— apply-groups reference
— apply-groups-exclude reference
— mst-path-cost number
— mst-port-priority number
— path-cost number
— port-num number
— priority number
— root-guard boolean
— sub-sla-mgmt
— admin-state keyword
— defaults
— app-profile reference
— int-dest-id
— string string
— top-q-tag
— sla-profile reference
— sub-profile reference
— subscriber-id
— auto-id
— sap-id
— string string
— mac-da-hashing boolean
— single-sub-parameters
— non-sub-traffic
— app-profile reference
— sla-profile reference
— sub-profile reference
— subscriber-id string
— profiled-traffic-only boolean
— sub-ident-policy reference
— subscriber-limit (keyword | number)
— transit-policy
— ip reference
— prefix reference
— segment-routing-v6 number
— apply-groups reference
— apply-groups-exclude reference
— locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— end-dt2m
— value number
— end-dt2u
— value number
— micro-segment-locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— udt2m
— value number
— udt2u
— value number
— service-id number
— service-mtu number
— shcv-policy-ipv4 reference
— spb
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— fid number
— isis-instance number
— level number
— apply-groups reference
— apply-groups-exclude reference
— bridge-priority number
— ect-high-path-fid number
— forwarding-tree
— topology keyword
— lsp-lifetime number
— lsp-refresh-interval
— half-lifetime boolean
— interval number
— overload
— timeout number
— overload-on-boot
— timeout number
— timers
— lsp-wait
— initial-wait number
— max-wait number
— second-wait number
— spf-wait
— initial-wait number
— max-wait number
— second-wait number
— spbm-control-vpls
— fid number
— service-name string
— split-horizon-group string
— apply-groups reference
— apply-groups-exclude reference
— description string
— fdb
— saps
— auto-learn-mac-protect boolean
— auto-learn-mac-protect-exclude-list reference
— discard-unprotected-dest-mac boolean
— protected-src-mac-violation-action keyword
— residential boolean
— spoke-sdp string
— accounting-policy reference
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— failure-action keyword
— wait-for-up-timer number
— block-on-mesh-failure boolean
— bpdu-translation keyword
— collect-stats boolean
— control-word boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— mac-monitoring
— policy-id reference
— description string
— dhcp
— apply-groups reference
— apply-groups-exclude reference
— description string
— snoop boolean
— egress
— filter
— ip reference
— ipv6 reference
— mac reference
— mfib-allowed-mda-destinations
— mda string
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— endpoint
— name reference
— precedence (number | keyword)
— entropy-label
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais
— client-meg-level number
— interface-support boolean
— interval number
— low-priority-defect keyword
— priority number
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— cfm-vlan-tag string
— csf
— multiplier decimal-number
— description string
— direction keyword
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— lbm-svc-act-responder boolean
— low-priority-defect keyword
— mac-address string
— one-way-delay-threshold number
— primary-vlan boolean
— mip primary-vlan (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— cfm-vlan-tag string
— mac-address string
— squelch-ingress-ctag-levels number
— squelch-ingress-levels number
— vmep-filter boolean
— etree-leaf boolean
— etree-root-leaf-tag boolean
— fdb
— auto-learn-mac-protect boolean
— auto-learn-mac-protect-exclude-list reference
— discard-unknown-source boolean
— limit-mac-move keyword
— mac-learning
— aging boolean
— learning boolean
— mac-pinning boolean
— maximum-mac-addresses number
— protected-src-mac-violation-action keyword
— force-vc-forwarding keyword
— hash-label
— signal-capability
— i-vpls-mac-flush
— bgp-evpn
— send-to-bvpls boolean
— igmp-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— mrouter-port boolean
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— ignore-standby-signaling boolean
— ingress
— filter
— ip reference
— ipv6 reference
— mac reference
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— l2pt
— termination
— protocols
— cdp boolean
— dtp boolean
— pagp boolean
— stp boolean
— udld boolean
— vtp boolean
— mld-snooping
— apply-groups reference
— apply-groups-exclude reference
— fast-leave boolean
— import-policy reference
— maximum-number-groups number
— mrouter-port boolean
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— router-alert-check boolean
— send-queries boolean
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— monitor-oper-group reference
— mrp
— apply-groups reference
— apply-groups-exclude reference
— join-time number
— leave-all-time number
— leave-time number
— periodic-time number
— periodic-timer boolean
— policy reference
— oper-group reference
— pbb
— fault-propagation
— backbone-mac-address string
— backbone-mac-name reference
— pim-snooping
— apply-groups reference
— apply-groups-exclude reference
— maximum-number-groups number
— pw-status
— signaling boolean
— spb
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— level number
— apply-groups reference
— apply-groups-exclude reference
— hello-interval number
— hello-multiplier number
— metric number
— lsp-pacing-interval number
— retransmit-interval number
— split-horizon-group reference
— static-isid
— range number
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— stp
— admin-state keyword
— auto-edge boolean
— edge-port boolean
— link-type keyword
— path-cost number
— port-num number
— priority number
— root-guard boolean
— transit-policy
— prefix reference
— vc-type keyword
— vlan-vc-tag number
— stp
— admin-state keyword
— forward-delay number
— hello-time number
— hold-count number
— maximum-age number
— mode keyword
— mst-instance number
— apply-groups reference
— apply-groups-exclude reference
— mst-priority number
— vlan-range string
— mst-maximum-hops number
— mst-name string
— mst-revision number
— priority number
— temp-flooding number
— tunnel-elmi boolean
— vpn-id number
— vxlan
— instance number
— apply-groups reference
— apply-groups-exclude reference
— assisted-replication
— leaf
— acttime number
— replicator
— egress-vtep (ipv4-address-no-zone | ipv6-address-no-zone)
— fdb
— discard-unknown-source boolean
— mac-learning
— aging boolean
— learning boolean
— maximum-mac-addresses number
— protected-src-mac-violation-action keyword
— igmp-snooping
— mrouter-port boolean
— mld-snooping
— mrouter-port boolean
— network
— ingress
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— rx-discard-on-ndf keyword
— source-vtep-security boolean
— vni number
— source-vtep (ipv4-address-no-zone | ipv6-address-no-zone)
— wlan-gw
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— wlan-gw-group reference
— vprn string
— aa-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ip-mtu number
— ipv4
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— sap string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— egress
— filter
— ip reference
— qos
— sap-egress
— policy-name reference
— fwd-wholesale
— pppoe-service reference
— ingress
— qos
— sap-ingress
— overrides
— policy-name reference
— lag
— aaa
— remote-servers
— radius
— access-algorithm keyword
— accounting boolean
— accounting-port number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authorization boolean
— interactive-authentication boolean
— port number
— server number
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— authenticator keyword
— secret string
— tls-client-profile reference
— server-retry number
— server-timeout number
— use-default-template boolean
— tacplus
— accounting
— record-type keyword
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authorization
— request-format
— access-operation-cmd keyword
— use-priv-lvl boolean
— interactive-authentication boolean
— priv-lvl-map
— priv-lvl number
— apply-groups reference
— apply-groups-exclude reference
— user-profile-name reference
— server number
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— port number
— secret string
— server-timeout number
— use-default-template boolean
— aarp-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ip-mtu number
— spoke-sdp string
— aarp
— id reference
— type keyword
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— egress
— filter
— ip reference
— vc-label number
— ingress
— filter
— ip reference
— vc-label number
— admin-state keyword
— aggregates
— aggregate (ipv4-prefix | ipv6-prefix)
— aggregator
— address string
— as-number number
— apply-groups reference
— apply-groups-exclude reference
— as-set boolean
— blackhole
— generate-icmp boolean
— community string
— description string
— discard-component-communities boolean
— indirect (ipv4-address-no-zone | ipv6-address-no-zone)
— local-preference number
— policy reference
— summary-only boolean
— tunnel-group number
— apply-groups reference
— apply-groups-exclude reference
— allow-export-bgp-vpn boolean
— apply-groups reference
— apply-groups-exclude reference
— autonomous-system number
— bgp
— admin-state keyword
— advertise-inactive boolean
— advertise-ipv6-next-hops
— ipv4 boolean
— aggregator-id-zero boolean
— apply-groups reference
— apply-groups-exclude reference
— asn-4-byte boolean
— authentication-key string
— authentication-keychain reference
— backup-path
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— label-ipv6 boolean
— best-path-selection
— always-compare-med
— med-value keyword
— strict-as boolean
— as-path-ignore
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— label-ipv6 boolean
— compare-origin-validation-state boolean
— d-path-length-ignore boolean
— deterministic-med boolean
— ebgp-ibgp-equal
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— label-ipv6 boolean
— ignore-nh-metric boolean
— ignore-router-id
— origin-invalid-unusable boolean
— bfd-liveness boolean
— bfd-strict-mode
— advertise
— holdtime number
— next-hop-reachability boolean
— client-reflect boolean
— cluster
— cluster-id string
— connect-retry number
— convergence
— family keyword
— apply-groups reference
— apply-groups-exclude reference
— max-wait-to-advertise number
— min-wait-to-advertise number
— damp-peer-oscillations
— error-interval number
— idle-hold-time
— initial-wait number
— max-wait number
— second-wait number
— damping boolean
— default-label-preference
— ebgp number
— ibgp number
— default-preference
— ebgp number
— ibgp number
— description string
— domain-id string
— dynamic-neighbor-limit number
— ebgp-default-reject-policy
— export boolean
— import boolean
— eibgp-loadbalance boolean
— enforce-first-as boolean
— error-handling
— update-fault-tolerance boolean
— export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— extended-nh-encoding
— ipv4 boolean
— family
— flow-ipv4 boolean
— flow-ipv6 boolean
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— mcast-ipv4 boolean
— mcast-ipv6 boolean
— fast-external-failover boolean
— flowspec
— validate-dest-prefix boolean
— validate-redirect-ip boolean
— graceful-restart
— gr-notification boolean
— long-lived
— advertise-stale-to-all-neighbors boolean
— advertised-stale-time number
— family keyword
— advertised-stale-time number
— apply-groups reference
— apply-groups-exclude reference
— helper-override-stale-time number
— forwarding-bits-set keyword
— helper-override-restart-time number
— helper-override-stale-time number
— without-no-export boolean
— restart-time number
— stale-routes-time number
— group string
— admin-state keyword
— advertise-inactive boolean
— advertise-ipv6-next-hops
— ipv4 boolean
— aggregator-id-zero boolean
— apply-groups reference
— apply-groups-exclude reference
— as-override boolean
— asn-4-byte boolean
— authentication-key string
— authentication-keychain reference
— bfd-liveness boolean
— bfd-strict-mode
— advertise
— holdtime number
— next-hop-reachability boolean
— capability-negotiation boolean
— client-reflect boolean
— cluster
— cluster-id string
— connect-retry number
— damp-peer-oscillations
— error-interval number
— idle-hold-time
— initial-wait number
— max-wait number
— second-wait number
— damping boolean
— default-label-preference
— ebgp number
— ibgp number
— default-preference
— ebgp number
— ibgp number
— description string
— dynamic-neighbor
— interface reference
— allowed-peer-as string
— apply-groups reference
— apply-groups-exclude reference
— max-sessions number
— match
— prefix (ipv4-prefix | ipv6-prefix)
— allowed-peer-as string
— apply-groups reference
— apply-groups-exclude reference
— dynamic-neighbor-limit number
— ebgp-default-reject-policy
— export boolean
— import boolean
— enforce-first-as boolean
— error-handling
— update-fault-tolerance boolean
— evpn-link-bandwidth
— add-to-received-bgp number
— export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— extended-nh-encoding
— ipv4 boolean
— family
— flow-ipv4 boolean
— flow-ipv6 boolean
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— mcast-ipv4 boolean
— mcast-ipv6 boolean
— fast-external-failover boolean
— graceful-restart
— gr-notification boolean
— long-lived
— advertise-stale-to-all-neighbors boolean
— advertised-stale-time number
— family keyword
— advertised-stale-time number
— apply-groups reference
— apply-groups-exclude reference
— helper-override-stale-time number
— forwarding-bits-set keyword
— helper-override-restart-time number
— helper-override-stale-time number
— without-no-export boolean
— restart-time number
— stale-routes-time number
— hold-time
— minimum-hold-time number
— seconds number
— import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— initial-send-delay-zero boolean
— keepalive number
— label-preference number
— link-bandwidth
— accept-from-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— add-to-received-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— aggregate-used-paths
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— send-to-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name)
— local-as
— as-number number
— prepend-global-as boolean
— private boolean
— local-preference number
— loop-detect keyword
— loop-detect-threshold number
— med-out (number | keyword)
— min-route-advertisement number
— monitor
— admin-state keyword
— all-stations boolean
— apply-groups reference
— apply-groups-exclude reference
— route-monitoring
— post-policy boolean
— pre-policy boolean
— station reference
— multihop number
— multipath-eligible boolean
— next-hop-self boolean
— origin-validation
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— passive boolean
— path-mtu-discovery boolean
— peer-as number
— peer-ip-tracking boolean
— preference number
— prefix-limit keyword
— apply-groups reference
— apply-groups-exclude reference
— hold-excess number
— idle-timeout number
— log-only boolean
— maximum number
— post-import boolean
— threshold number
— remove-private
— limited boolean
— replace boolean
— skip-peer-as boolean
— send-communities
— extended boolean
— large boolean
— standard boolean
— send-default
— export-policy reference
— ipv4 boolean
— ipv6 boolean
— split-horizon boolean
— static-group boolean
— tcp-mss (number | keyword)
— third-party-nexthop boolean
— ttl-security number
— type keyword
— hold-time
— minimum-hold-time number
— seconds number
— ibgp-multipath boolean
— import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— initial-send-delay-zero boolean
— keepalive number
— label-preference number
— local-as
— as-number number
— prepend-global-as boolean
— private boolean
— local-preference number
— loop-detect keyword
— loop-detect-threshold number
— med-out (number | keyword)
— min-route-advertisement number
— monitor
— admin-state keyword
— all-stations boolean
— apply-groups reference
— apply-groups-exclude reference
— route-monitoring
— post-policy boolean
— pre-policy boolean
— station reference
— multihop number
— multipath
— ebgp number
— family keyword
— apply-groups reference
— apply-groups-exclude reference
— ebgp number
— ibgp number
— max-paths number
— restrict keyword
— unequal-cost boolean
— ibgp number
— max-paths number
— restrict keyword
— unequal-cost boolean
— neighbor (ipv4-address-with-zone | ipv6-address-with-zone)
— admin-state keyword
— advertise-inactive boolean
— advertise-ipv6-next-hops
— ipv4 boolean
— aggregator-id-zero boolean
— apply-groups reference
— apply-groups-exclude reference
— as-override boolean
— asn-4-byte boolean
— authentication-key string
— authentication-keychain reference
— bfd-liveness boolean
— bfd-strict-mode
— advertise
— holdtime number
— next-hop-reachability boolean
— capability-negotiation boolean
— client-reflect boolean
— cluster
— cluster-id string
— connect-retry number
— damp-peer-oscillations
— error-interval number
— idle-hold-time
— initial-wait number
— max-wait number
— second-wait number
— damping boolean
— default-label-preference
— ebgp number
— ibgp number
— default-preference
— ebgp number
— ibgp number
— description string
— ebgp-default-reject-policy
— export boolean
— import boolean
— enforce-first-as boolean
— error-handling
— update-fault-tolerance boolean
— evpn-link-bandwidth
— add-to-received-bgp number
— export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— extended-nh-encoding
— ipv4 boolean
— family
— flow-ipv4 boolean
— flow-ipv6 boolean
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— mcast-ipv4 boolean
— mcast-ipv6 boolean
— fast-external-failover boolean
— graceful-restart
— gr-notification boolean
— long-lived
— advertise-stale-to-all-neighbors boolean
— advertised-stale-time number
— family keyword
— advertised-stale-time number
— apply-groups reference
— apply-groups-exclude reference
— helper-override-stale-time number
— forwarding-bits-set keyword
— helper-override-restart-time number
— helper-override-stale-time number
— without-no-export boolean
— restart-time number
— stale-routes-time number
— group reference
— hold-time
— minimum-hold-time number
— seconds number
— import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— initial-send-delay-zero boolean
— keepalive number
— label-preference number
— link-bandwidth
— accept-from-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— add-to-received-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— aggregate-used-paths
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— send-to-ebgp
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name)
— local-as
— as-number number
— prepend-global-as boolean
— private boolean
— local-preference number
— loop-detect keyword
— loop-detect-threshold number
— med-out (number | keyword)
— min-route-advertisement number
— monitor
— admin-state keyword
— all-stations boolean
— apply-groups reference
— apply-groups-exclude reference
— route-monitoring
— post-policy boolean
— pre-policy boolean
— station reference
— multihop number
— multipath-eligible boolean
— next-hop-self boolean
— origin-validation
— ipv4 boolean
— ipv6 boolean
— label-ipv4 boolean
— passive boolean
— path-mtu-discovery boolean
— peer-as number
— peer-creation-type keyword
— peer-ip-tracking boolean
— preference number
— prefix-limit keyword
— apply-groups reference
— apply-groups-exclude reference
— hold-excess number
— idle-timeout number
— log-only boolean
— maximum number
— post-import boolean
— threshold number
— remove-private
— limited boolean
— replace boolean
— skip-peer-as boolean
— send-communities
— extended boolean
— large boolean
— standard boolean
— send-default
— export-policy reference
— ipv4 boolean
— ipv6 boolean
— split-horizon boolean
— tcp-mss (number | keyword)
— third-party-nexthop boolean
— ttl-security number
— type keyword
— next-hop-resolution
— policy reference
— use-bgp-routes boolean
— use-leaked-routes
— static boolean
— path-mtu-discovery boolean
— peer-ip-tracking boolean
— peer-tracking-policy reference
— preference number
— rapid-withdrawal boolean
— remove-private
— limited boolean
— replace boolean
— skip-peer-as boolean
— rib-management
— ipv4
— leak-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— route-table-import
— apply-groups reference
— apply-groups-exclude reference
— policy-name reference
— ipv6
— leak-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— route-table-import
— apply-groups reference
— apply-groups-exclude reference
— policy-name reference
— label-ipv4
— leak-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— route-table-import
— apply-groups reference
— apply-groups-exclude reference
— policy-name reference
— label-ipv6
— leak-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— router-id string
— send-communities
— extended boolean
— large boolean
— standard boolean
— send-default
— export-policy reference
— ipv4 boolean
— ipv6 boolean
— split-horizon boolean
— tcp-mss number
— third-party-nexthop boolean
— bgp-evpn
— mpls number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— auto-bind-tunnel
— allow-flex-algo-fallback boolean
— ecmp number
— enforce-strict-tunnel-tagging boolean
— resolution keyword
— resolution-filter
— bgp boolean
— ldp boolean
— mpls-fwd-policy boolean
— rib-api boolean
— rsvp boolean
— sr-isis boolean
— sr-ospf boolean
— sr-ospf3 boolean
— sr-policy boolean
— sr-te boolean
— udp boolean
— default-route-tag string
— domain-id string
— dynamic-egress-label-limit boolean
— evi number
— evpn-link-bandwidth
— advertise
— max-dynamic-weight number
— weight (number | keyword)
— weighted-ecmp boolean
— route-distinguisher (string | keyword)
— send-tunnel-encap
— mpls boolean
— mpls-over-udp boolean
— vrf-export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-target
— community string
— export-community string
— import-community string
— segment-routing-v6 number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— domain-id string
— evi number
— evpn-link-bandwidth
— advertise
— max-dynamic-weight number
— weight (number | keyword)
— weighted-ecmp boolean
— resolution keyword
— route-distinguisher (string | keyword)
— source-address string
— srv6
— default-locator string
— instance reference
— vrf-export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-target
— community string
— export-community string
— import-community string
— bgp-ipvpn
— mpls
— admin-state keyword
— auto-bind-tunnel
— allow-flex-algo-fallback boolean
— apply-groups reference
— apply-groups-exclude reference
— ecmp number
— enforce-strict-tunnel-tagging boolean
— resolution keyword
— resolution-filter
— bgp boolean
— gre boolean
— ldp boolean
— mpls-fwd-policy boolean
— rib-api boolean
— rsvp boolean
— sr-isis boolean
— sr-ospf boolean
— sr-ospf3 boolean
— sr-policy boolean
— sr-te boolean
— udp boolean
— weighted-ecmp boolean
— domain-id string
— dynamic-egress-label-limit boolean
— route-distinguisher (string | keyword)
— vrf-export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-target
— community string
— export-community string
— import-community string
— segment-routing-v6 number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-route-tag string
— domain-id string
— resolution keyword
— route-distinguisher (string | keyword)
— source-address string
— srv6
— default-locator string
— instance reference
— vrf-export
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-import
— apply-groups reference
— apply-groups-exclude reference
— policy (policy-expr-string | string)
— vrf-target
— community string
— export-community string
— import-community string
— bgp-shared-queue
— cir (number | keyword)
— pir (number | keyword)
— bgp-vpn-backup
— ipv4 boolean
— ipv6 boolean
— carrier-carrier-vpn boolean
— class-forwarding boolean
— confederation
— confed-as-num number
— members number
— customer reference
— d-path-length-ignore boolean
— description string
— dhcp-server
— apply-groups reference
— apply-groups-exclude reference
— dhcpv4 string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— failover
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ignore-mclt-on-takeover boolean
— maximum-client-lead-time number
— partner-down-delay number
— peer reference
— apply-groups reference
— apply-groups-exclude reference
— sync-tag string
— startup-wait-time number
— force-renews boolean
— lease-hold
— additional-scenarios
— internal-lease-ipsec boolean
— solicited-release boolean
— time number
— pool string
— apply-groups reference
— apply-groups-exclude reference
— description string
— failover
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ignore-mclt-on-takeover boolean
— maximum-client-lead-time number
— partner-down-delay number
— peer reference
— apply-groups reference
— apply-groups-exclude reference
— sync-tag string
— startup-wait-time number
— max-lease-time number
— min-lease-time number
— minimum-free
— absolute number
— event-when-depleted boolean
— percent number
— nak-non-matching-subnet boolean
— offer-time number
— options
— option (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— ascii-string string
— duration number
— empty
— hex-string string
— ipv4-address string
— netbios-node-type keyword
— subnet string
— address-range string end string
— apply-groups reference
— apply-groups-exclude reference
— failover-control-type keyword
— apply-groups reference
— apply-groups-exclude reference
— drain boolean
— exclude-addresses string end string
— maximum-declined number
— minimum-free
— absolute number
— event-when-depleted boolean
— percent number
— options
— option (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— ascii-string string
— duration number
— empty
— hex-string string
— ipv4-address string
— netbios-node-type keyword
— pool-selection
— use-gi-address
— scope keyword
— use-pool-from-client
— delimiter string
— user-db reference
— user-identification keyword
— dhcpv6 string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— auto-provisioned boolean
— defaults
— apply-groups reference
— apply-groups-exclude reference
— options
— option (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— ascii-string string
— domain-string string
— duration number
— empty
— hex-string string
— ipv6-address string
— preferred-lifetime number
— rebind-time number
— renew-time number
— valid-lifetime number
— description string
— failover
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ignore-mclt-on-takeover boolean
— maximum-client-lead-time number
— partner-down-delay number
— peer reference
— apply-groups reference
— apply-groups-exclude reference
— sync-tag string
— startup-wait-time number
— ignore-rapid-commit boolean
— interface-id-mapping boolean
— lease-hold
— additional-scenarios
— internal-lease-ipsec boolean
— solicited-release boolean
— time number
— lease-query boolean
— pool string
— apply-groups reference
— apply-groups-exclude reference
— delegated-prefix
— length number
— maximum number
— minimum number
— description string
— exclude-prefix string
— failover
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ignore-mclt-on-takeover boolean
— maximum-client-lead-time number
— partner-down-delay number
— peer reference
— apply-groups reference
— apply-groups-exclude reference
— sync-tag string
— startup-wait-time number
— options
— option (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— ascii-string string
— domain-string string
— duration number
— empty
— hex-string string
— ipv6-address string
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— drain boolean
— failover-control-type keyword
— options
— option (number | keyword)
— apply-groups reference
— apply-groups-exclude reference
— ascii-string string
— domain-string string
— duration number
— empty
— hex-string string
— ipv6-address string
— preferred-lifetime number
— prefix-length-threshold number
— absolute number
— apply-groups reference
— apply-groups-exclude reference
— event-when-depleted boolean
— percent number
— prefix-type
— pd boolean
— wan-host boolean
— rebind-time number
— renew-time number
— valid-lifetime number
— prefix-length-threshold number
— apply-groups reference
— apply-groups-exclude reference
— event-when-depleted boolean
— minimum-free-percent number
— pool-selection
— use-link-address
— scope keyword
— use-pool-from-client
— delimiter string
— server-id
— apply-groups reference
— apply-groups-exclude reference
— duid-enterprise
— ascii-string string
— hex-string string
— duid-link-local
— user-identification keyword
— dns
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— default-domain string
— ipv4-source-address (keyword | ipv4-unicast-address)
— ipv6-source-address (keyword | ipv6-unicast-address)
— server (ipv4-address-no-zone | ipv6-address-no-zone)
— ecmp number
— ecmp-unequal-cost boolean
— entropy-label boolean
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— export-inactive-bgp boolean
— export-inactive-bgp-enhanced boolean
— fib-priority keyword
— firewall
— apply-groups reference
— apply-groups-exclude reference
— domain string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— dhcpv6-server
— name string
— router-instance string
— nat-group reference
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— description string
— wlan-gw-group reference
— flowspec
— apply-groups reference
— apply-groups-exclude reference
— filter-cam-type keyword
— ip-filter-max-size number
— ipv6-filter-max-size number
— grt-leaking
— allow-local-management boolean
— apply-groups reference
— apply-groups-exclude reference
— export-grt
— policy-name (policy-expr-string | string)
— export-limit number
— export-v6-limit number
— grt-lookup boolean
— import-grt
— policy-name (policy-expr-string | string)
— gsmp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— group string
— admin-state keyword
— ancp
— dynamic-topology-discovery boolean
— oam boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-multiplier number
— idle-filter boolean
— keepalive number
— neighbor string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— local-address string
— priority-marking
— dscp keyword
— prec number
— persistency boolean
— gtp
— s11
— interface reference
— apn-policy reference
— apply-groups reference
— apply-groups-exclude reference
— peer-profile-map
— prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— peer-profile reference
— upf-data-endpoint
— apply-groups reference
— apply-groups-exclude reference
— fpe reference
— interface reference
— uplink
— apn string
— apply-groups reference
— apply-groups-exclude reference
— pdn-type keyword
— peer-profile-map
— prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— peer-profile reference
— hash-label boolean
— igmp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— forwarding-group-interface forwarding-service string group-interface-name reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— query-source-address string
— router-alert-check boolean
— sub-hosts-only boolean
— subnet-check boolean
— version keyword
— group-if-query-source-address string
— group-interface reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— query-source-address string
— router-alert-check boolean
— sub-hosts-only boolean
— subnet-check boolean
— version keyword
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— mc-constraints
— level number
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— number-down number
— apply-groups reference
— apply-groups-exclude reference
— level number
— use-lag-port-weight boolean
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— redundant-mcast boolean
— router-alert-check boolean
— ssm-translate
— group-range start string end string
— apply-groups reference
— apply-groups-exclude reference
— source string
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— group-range start string end string step string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— subnet-check boolean
— version keyword
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— ssm-translate
— group-range start string end string
— apply-groups reference
— apply-groups-exclude reference
— source string
— igmp-host-tracking
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— ignore-nh-metric boolean
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cflowd-parameters
— sampling keyword
— apply-groups reference
— apply-groups-exclude reference
— direction keyword
— sample-profile (keyword | number)
— type keyword
— cpu-protection reference
— description string
— dynamic-tunnel-redundant-nexthop string
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipv6
— down
— init-only boolean
— seconds number
— up
— seconds number
— if-attribute
— admin-group reference
— srlg-group reference
— ingress
— destination-class-lookup boolean
— policy-accounting reference
— ingress-stats boolean
— ip-mtu number
— ipsec
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ip-exception reference
— ipsec-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-designate boolean
— bfd-liveness
— dest-ip string
— interface string
— service-name string
— clear-df-bit boolean
— copy-traffic-class-upon-decapsulation boolean
— description string
— encapsulated-ip-mtu number
— icmp-generation
— frag-required
— admin-state keyword
— interval number
— message-count number
— icmp6-generation
— packet-too-big
— admin-state keyword
— interval number
— message-count number
— ip-mtu number
— key-exchange
— dynamic
— auto-establish boolean
— cert
— cert-profile reference
— status-verify
— default-result keyword
— primary keyword
— secondary keyword
— trust-anchor-profile reference
— id
— fqdn string
— ipv4 string
— ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
— ike-policy reference
— ipsec-transform reference
— pre-shared-key string
— manual
— keys number direction keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— encryption-key string
— ipsec-transform reference
— spi number
— local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone)
— max-history-key-records
— esp number
— ike number
— pmtu-discovery-aging number
— private-sap number
— private-service string
— private-tcp-mss-adjust number
— propagate-pmtu-v4 boolean
— propagate-pmtu-v6 boolean
— public-tcp-mss-adjust (number | keyword)
— remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— replay-window number
— security-policy
— id number
— strict-match boolean
— ipv6-exception reference
— public-sap number
— tunnel-group reference
— ipv4
— addresses
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— allow-directed-broadcasts boolean
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— gi-address string
— lease-populate
— max-leases number
— option-82
— action keyword
— circuit-id
— ascii-tuple
— ifindex
— none
— sap-id
— vlan-ascii-tuple
— remote-id
— ascii-string string
— mac
— none
— vendor-specific-option
— client-mac-address boolean
— pool-name boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-plain-bootp boolean
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— trusted boolean
— use-arp boolean
— icmp
— mask-reply boolean
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— ttl-expired
— admin-state keyword
— number number
— seconds number
— unreachables
— admin-state keyword
— number number
— seconds number
— ip-helper-address string
— local-dhcp-server reference
— neighbor-discovery
— host-route
— populate keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-unsolicited boolean
— limit
— log-only boolean
— max-entries number
— threshold number
— local-proxy-arp boolean
— populate boolean
— proactive-refresh boolean
— proxy-arp-policy reference
— remote-proxy-arp boolean
— retry-timer number
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— static-neighbor-unnumbered
— mac-address string
— timeout number
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— prefix-length number
— track-srrp number
— qos-route-lookup keyword
— secondary string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— igp-inhibit boolean
— prefix-length number
— track-srrp number
— tcp-mss number
— unnumbered
— ip-address string
— ip-int-name string
— urpf-check
— ignore-default boolean
— mode keyword
— vrrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— backup string
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip string
— interface-name string
— service-name string
— init-delay number
— mac string
— master-int-inherit boolean
— message-interval number
— monitor-oper-group reference
— ntp-reply boolean
— oper-group reference
— owner boolean
— passive boolean
— ping-reply boolean
— policy reference
— preempt boolean
— priority number
— ssh-reply boolean
— standby-forwarding boolean
— telnet-reply boolean
— traceroute-reply boolean
— ipv6
— address string
— apply-groups reference
— apply-groups-exclude reference
— duplicate-address-detection boolean
— eui-64 boolean
— prefix-length number
— primary-preference number
— track-srrp number
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— relay
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— lease-populate
— max-nbr-of-leases number
— route-populate
— na boolean
— pd
— exclude boolean
— ta boolean
— link-address string
— neighbor-resolution boolean
— option
— apply-groups reference
— apply-groups-exclude reference
— interface-id
— ascii-tuple
— if-index
— sap-id
— string string
— remote-id boolean
— python-policy reference
— server string
— source-address string
— user-db reference
— server
— apply-groups reference
— apply-groups-exclude reference
— max-nbr-of-leases number
— prefix-delegation
— admin-state keyword
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— client-id
— duid string
— iaid number
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— duplicate-address-detection boolean
— forward-ipv4-packets boolean
— icmp6
— packet-too-big
— admin-state keyword
— number number
— seconds number
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— time-exceeded
— admin-state keyword
— number number
— seconds number
— unreachables
— admin-state keyword
— number number
— seconds number
— link-local-address
— address string
— duplicate-address-detection boolean
— local-dhcp-server reference
— neighbor-discovery
— host-route
— populate keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-unsolicited keyword
— limit
— log-only boolean
— max-entries number
— threshold number
— local-proxy-nd boolean
— proactive-refresh keyword
— proxy-nd-policy reference
— reachable-time number
— secure-nd
— admin-state keyword
— allow-unsecured-msgs boolean
— public-key-min-bits number
— security-parameter number
— stale-time number
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— qos-route-lookup keyword
— tcp-mss number
— urpf-check
— ignore-default boolean
— mode keyword
— vrrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— backup string
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— interface-name string
— service-name string
— init-delay number
— mac string
— master-int-inherit boolean
— message-interval number
— monitor-oper-group reference
— ntp-reply boolean
— oper-group reference
— owner boolean
— passive boolean
— ping-reply boolean
— policy reference
— preempt boolean
— priority number
— standby-forwarding boolean
— telnet-reply boolean
— traceroute-reply boolean
— load-balancing
— flow-label-load-balancing boolean
— ip-load-balancing keyword
— spi-load-balancing boolean
— teid-load-balancing boolean
— loopback boolean
— mac string
— mac-accounting boolean
— monitor-oper-group reference
— multi-chassis-shunting-profile reference
— ping-template
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— destination-address string
— name reference
— ptp-hw-assist
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— radius-auth-policy reference
— sap string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— anti-spoof keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— calling-station-id string
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— filter
— ip reference
— ipv6 reference
— qos
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— overrides
— hs-secondary-shaper string
— hs-wrr-group reference
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— violation-threshold decimal-number
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queue-group-redirect-list reference
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— fwd-wholesale
— pppoe-service reference
— host-admin-state keyword
— host-lockout-policy reference
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— root
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— mbs-contribution (number | keyword)
— policy-name reference
— sap-ingress
— fp-redirect-group
— group-name reference
— instance number
— overrides
— ip-criteria
— activate-entry-tag number
— ipv6-criteria
— activate-entry-tag number
— policer reference
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— monitor-queue-depth
— fast-polling boolean
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queuing-type keyword
— scheduler-policy
— overrides
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— queue-group-redirect-list reference
— ip-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— clear-df-bit boolean
— delivery-service string
— description string
— dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— dscp keyword
— encapsulated-ip-mtu number
— gre-header
— admin-state keyword
— key
— admin-state keyword
— receive number
— send number
— icmp-generation
— frag-required
— admin-state keyword
— interval number
— message-count number
— icmp6-generation
— packet-too-big
— admin-state keyword
— number number
— seconds number
— ip-mtu number
— ipsec-transport-mode-profile reference
— local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— pmtu-discovery-aging number
— private-tcp-mss-adjust number
— propagate-pmtu-v4 boolean
— propagate-pmtu-v6 boolean
— public-tcp-mss-adjust (number | keyword)
— reassembly (number | keyword)
— remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— ipsec-gateway string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cert
— cert-profile reference
— status-verify
— default-result keyword
— primary keyword
— secondary keyword
— trust-anchor-profile reference
— client-db
— fallback boolean
— name reference
— default-secure-service
— interface string
— service-name string
— default-tunnel-template reference
— dhcp-address-assignment
— dhcpv4
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gi-address string
— send-release boolean
— server
— address string
— router-instance string
— dhcpv6
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— link-address string
— send-release boolean
— server
— address string
— router-instance string
— ike-policy reference
— local
— address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— dhcp-server string
— pool string
— router-instance string
— secondary-pool string
— ipv6
— dhcp-server string
— pool string
— router-instance string
— gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— id
— auto
— fqdn string
— ipv4 string
— ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
— max-history-key-records
— esp number
— ike number
— pre-shared-key string
— radius
— accounting-policy reference
— authentication-policy reference
— ts-list reference
— ipsec-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-designate boolean
— bfd-liveness
— dest-ip string
— interface string
— service-name string
— clear-df-bit boolean
— copy-traffic-class-upon-decapsulation boolean
— description string
— dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
— encapsulated-ip-mtu number
— icmp-generation
— frag-required
— admin-state keyword
— interval number
— message-count number
— icmp6-generation
— packet-too-big
— admin-state keyword
— interval number
— message-count number
— ip-mtu number
— key-exchange
— dynamic
— auto-establish boolean
— cert
— cert-profile reference
— status-verify
— default-result keyword
— primary keyword
— secondary keyword
— trust-anchor-profile reference
— id
— fqdn string
— ipv4 string
— ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
— ike-policy reference
— ipsec-transform reference
— pre-shared-key string
— manual
— keys number direction keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— encryption-key string
— ipsec-transform reference
— spi number
— max-history-key-records
— esp number
— ike number
— pmtu-discovery-aging number
— private-tcp-mss-adjust number
— propagate-pmtu-v4 boolean
— propagate-pmtu-v6 boolean
— public-tcp-mss-adjust (number | keyword)
— replay-window number
— security-policy
— id reference
— strict-match boolean
— tunnel-endpoint
— delivery-service string
— local-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— multi-service-site reference
— static-host
— ipv4 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— transit-policy
— ip reference
— prefix reference
— shcv-policy-ipv4 reference
— spoke-sdp string
— aarp
— id reference
— type keyword
— accounting-policy reference
— admin-state keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— bfd
— bfd-liveness
— encap keyword
— bfd-template reference
— failure-action keyword
— wait-for-up-timer number
— collect-stats boolean
— control-word boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— description string
— egress
— filter
— ip reference
— ipv6 reference
— qos
— network
— policy-name reference
— port-redirect-group
— group-name reference
— instance number
— vc-label number
— entropy-label
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— hash-label
— signal-capability
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— network
— fp-redirect-group
— group-name reference
— instance number
— policy-name reference
— vc-label number
— transit-policy
— ip reference
— prefix reference
— vc-type keyword
— static-tunnel-redundant-nexthop string
— tos-marking-state keyword
— tunnel boolean
— vas-if-type keyword
— vpls string
— apply-groups reference
— apply-groups-exclude reference
— egress
— reclassify-using-qos reference
— routed-override-filter
— ip reference
— ipv6 reference
— evpn
— arp
— advertise keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— flood-garp-and-unknown-req boolean
— learn-dynamic boolean
— nd
— advertise keyword
— apply-groups reference
— apply-groups-exclude reference
— route-tag number
— learn-dynamic boolean
— evpn-tunnel
— allow-bfd boolean
— ipv6-gateway-address keyword
— supplementary-broadcast-domain boolean
— ingress
— routed-override-filter
— ip reference
— ipv6 reference
— ip-mirror-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— spoke-sdp string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— ingress
— filter
— ip reference
— vc-label number
— ipsec
— allow-reverse-route-override-type keyword
— multi-chassis-shunt-interface reference
— apply-groups reference
— apply-groups-exclude reference
— next-hop
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— multi-chassis-shunting-profile string
— apply-groups reference
— apply-groups-exclude reference
— peer reference
— apply-groups reference
— apply-groups-exclude reference
— multi-chassis-shunt-interface reference
— security-policy number
— apply-groups reference
— apply-groups-exclude reference
— entry number
— apply-groups reference
— apply-groups-exclude reference
— local-ip
— address string
— any boolean
— local-ipv6
— address string
— any boolean
— remote-ip
— address string
— any boolean
— remote-ipv6
— address string
— any boolean
— ipv6
— neighbor-discovery
— reachable-time number
— stale-time number
— router-advertisement
— apply-groups reference
— apply-groups-exclude reference
— dns-options
— apply-groups reference
— apply-groups-exclude reference
— rdnss-lifetime (keyword | number)
— server string
— interface reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— current-hop-limit number
— dns-options
— apply-groups reference
— apply-groups-exclude reference
— include-rdnss boolean
— rdnss-lifetime (number | keyword)
— server string
— managed-configuration boolean
— max-advertisement-interval number
— min-advertisement-interval number
— mtu number
— other-stateful-configuration boolean
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— autonomous boolean
— on-link boolean
— preferred-lifetime (keyword | number)
— valid-lifetime (keyword | number)
— reachable-time number
— retransmit-time number
— router-lifetime number
— use-virtual-mac boolean
— isis number
— admin-state keyword
— advertise-passive-only boolean
— advertise-router-capability keyword
— all-l1isis string
— all-l2isis string
— apply-groups reference
— apply-groups-exclude reference
— area-address string
— authentication-check boolean
— authentication-key string
— authentication-keychain reference
— authentication-type keyword
— csnp-authentication boolean
— default-route-tag number
— export-limit
— log-percent number
— number number
— export-policy reference
— graceful-restart
— helper-mode boolean
— hello-authentication boolean
— hello-padding keyword
— ignore-attached-bit boolean
— ignore-lsp-errors boolean
— ignore-narrow-metric boolean
— iid-tlv boolean
— import-policy reference
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness
— ipv4
— include-bfd-tlv boolean
— ipv6
— include-bfd-tlv boolean
— csnp-interval number
— default-instance boolean
— hello-authentication boolean
— hello-authentication-key string
— hello-authentication-keychain reference
— hello-authentication-type keyword
— hello-padding keyword
— interface-type keyword
— ipv4-multicast boolean
— ipv6-unicast boolean
— level keyword
— apply-groups reference
— apply-groups-exclude reference
— hello-authentication-key string
— hello-authentication-keychain reference
— hello-authentication-type keyword
— hello-interval number
— hello-multiplier number
— hello-padding keyword
— ipv4-multicast-metric number
— ipv6-unicast-metric number
— metric number
— passive boolean
— priority number
— sd-offset number
— sf-offset number
— level-capability keyword
— load-balancing-weight number
— loopfree-alternate
— exclude boolean
— policy-map
— route-nh-template reference
— lsp-pacing-interval number
— mesh-group
— blocked
— value number
— passive boolean
— retransmit-interval number
— tag number
— ipv4-multicast-routing keyword
— ipv4-routing boolean
— ipv6-routing keyword
— level keyword
— advertise-router-capability boolean
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-keychain reference
— authentication-type keyword
— csnp-authentication boolean
— default-ipv4-multicast-metric number
— default-ipv6-unicast-metric number
— default-metric number
— external-preference number
— hello-authentication boolean
— hello-padding keyword
— loopfree-alternate-exclude boolean
— lsp-mtu-size number
— preference number
— psnp-authentication boolean
— wide-metrics-only boolean
— level-capability keyword
— link-group string
— apply-groups reference
— apply-groups-exclude reference
— description string
— level keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4-multicast-metric-offset number
— ipv4-unicast-metric-offset number
— ipv6-unicast-metric-offset number
— member reference
— oper-members number
— revert-members number
— loopfree-alternate
— exclude
— prefix-policy reference
— lsp-lifetime number
— lsp-minimum-remaining-lifetime number
— lsp-mtu-size number
— lsp-refresh
— half-lifetime boolean
— interval number
— mru-mismatch-detection boolean
— multi-topology
— ipv4-multicast boolean
— ipv6-unicast boolean
— multicast-import
— ipv4 boolean
— overload
— max-metric boolean
— overload-export-external boolean
— overload-export-interlevel boolean
— overload-fib-error-notify-only
— retry number
— overload-on-boot
— max-metric boolean
— timeout number
— poi-tlv boolean
— prefix-attributes-tlv boolean
— prefix-limit
— limit number
— log-only boolean
— overload-timeout (number | keyword)
— warning-threshold number
— psnp-authentication boolean
— reference-bandwidth number
— rib-priority
— high
— prefix-list reference
— tag number
— router-id string
— standard-multi-instance boolean
— strict-adjacency-check boolean
— summary-address (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— level-capability keyword
— route-tag number
— suppress-attached-bit boolean
— system-id string
— timers
— lsp-wait
— lsp-initial-wait number
— lsp-max-wait number
— lsp-second-wait number
— spf-wait
— spf-initial-wait number
— spf-max-wait number
— spf-second-wait number
— unicast-import
— ipv4 boolean
— ipv6 boolean
— l2tp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— avp-hiding keyword
— challenge boolean
— destruct-timeout number
— ethernet-tunnel
— reconnect-timeout (number | keyword)
— exclude-avps
— calling-number boolean
— initial-rx-lcp-conf-req boolean
— failover
— recovery-max-session-lifetime number
— recovery-method keyword
— recovery-time number
— track-srrp reference
— apply-groups reference
— apply-groups-exclude reference
— peer reference
— sync-tag string
— group string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— avp-hiding keyword
— challenge keyword
— description string
— destruct-timeout number
— ethernet-tunnel
— reconnect-timeout (number | keyword)
— failover
— recovery-method keyword
— recovery-time number
— hello-interval (number | keyword)
— idle-timeout (number | keyword)
— l2tpv3
— cookie-length (number | keyword)
— digest-type keyword
— nonce-length number
— password string
— private-tcp-mss-adjust (number | keyword)
— public-tcp-mss-adjust (number | keyword)
— pw-cap-list
— ethernet boolean
— ethernet-vlan boolean
— rem-router-id string
— track-password-change boolean
— lac
— df-bit keyword
— lns
— lns-group reference
— load-balance-method keyword
— mlppp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— endpoint
— ip (ipv4-address | keyword)
— mac (mac-address | keyword)
— interleave boolean
— max-fragment-delay (number | keyword)
— max-links number
— reassembly-timeout number
— short-sequence-numbers boolean
— ppp
— authentication keyword
— authentication-policy string
— chap-challenge-length
— end number
— start number
— default-group-interface
— interface string
— service-name string
— ipcp-subnet-negotiation boolean
— keepalive
— interval number
— multiplier number
— lcp-force-ack-accm boolean
— lcp-ignore-magic-numbers boolean
— mtu number
— proxy-authentication boolean
— proxy-lcp boolean
— reject-disabled-ncp boolean
— user-db string
— local-address string
— local-name string
— max-retries-estab number
— max-retries-not-estab number
— password string
— protocol keyword
— radius-accounting-policy reference
— receive-window-size number
— session-assign-method keyword
— session-limit (number | keyword)
— tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— auto-establish boolean
— avp-hiding keyword
— challenge keyword
— description string
— destruct-timeout number
— failover
— recovery-method keyword
— recovery-time number
— hello-interval (number | keyword)
— idle-timeout (number | keyword)
— l2tpv3
— private-tcp-mss-adjust (number | keyword)
— public-tcp-mss-adjust (number | keyword)
— lac
— df-bit keyword
— lns
— lns-group reference
— load-balance-method keyword
— mlppp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— endpoint
— ip (ipv4-address | keyword)
— mac (mac-address | keyword)
— interleave keyword
— max-fragment-delay number
— max-links number
— reassembly-timeout number
— short-sequence-numbers keyword
— ppp
— authentication keyword
— authentication-policy string
— chap-challenge-length
— end number
— start number
— default-group-interface
— interface string
— service-name string
— ipcp-subnet-negotiation keyword
— keepalive
— interval number
— multiplier number
— lcp-force-ack-accm keyword
— lcp-ignore-magic-numbers keyword
— mtu number
— proxy-authentication keyword
— proxy-lcp keyword
— reject-disabled-ncp keyword
— user-db string
— local-address string
— local-name string
— max-retries-estab number
— max-retries-not-estab number
— password string
— peer string
— preference number
— radius-accounting-policy reference
— receive-window-size number
— remote-name string
— session-limit (number | keyword)
— group-session-limit number
— hello-interval (number | keyword)
— idle-timeout (number | keyword)
— ignore-avps
— sequencing-required boolean
— l2tpv3
— cookie-length number
— digest-type keyword
— nonce-length number
— password string
— private-tcp-mss-adjust number
— public-tcp-mss-adjust number
— transport-type
— ip boolean
— lac
— calling-number-format string
— cisco-nas-port
— ethernet string
— df-bit boolean
— local-address string
— local-name string
— max-retries-estab number
— max-retries-not-estab number
— next-attempt keyword
— password string
— peer-address-change-policy keyword
— radius-accounting-policy reference
— receive-window-size number
— replace-result-code
— cdn-invalid-dst boolean
— cdn-permanent-no-facilities boolean
— cdn-temporary-no-facilities boolean
— rtm-debounce-time (number | keyword)
— session-assign-method keyword
— session-limit number
— tunnel-selection-blacklist
— add-tunnel-on
— address-change-timeout boolean
— cdn-err-code boolean
— cdn-invalid-dst boolean
— cdn-permanent-no-facilities boolean
— cdn-temporary-no-facilities boolean
— stop-ccn-err-code boolean
— stop-ccn-other boolean
— tx-cdn-not-established-in-time boolean
— max-list-length (number | keyword)
— max-time number
— timeout-action keyword
— tunnel-session-limit number
— label-mode keyword
— local-routes-domain-id string
— log
— apply-groups reference
— apply-groups-exclude reference
— filter string
— apply-groups reference
— apply-groups-exclude reference
— default-action keyword
— description string
— named-entry string
— action keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— application
— eq keyword
— neq keyword
— event
— eq number
— gt number
— gte number
— lt number
— lte number
— neq number
— message
— eq string
— neq string
— regexp boolean
— severity
— eq keyword
— gt keyword
— gte keyword
— lt keyword
— lte keyword
— neq keyword
— subject
— eq string
— neq string
— regexp boolean
— log-id string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— destination
— netconf
— max-entries number
— snmp
— max-entries number
— syslog reference
— filter reference
— netconf-stream string
— python-policy reference
— source
— change boolean
— debug boolean
— main boolean
— security boolean
— time-format keyword
— snmp-trap-group string
— apply-groups reference
— apply-groups-exclude reference
— description string
— trap-target string
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— description string
— notify-community string
— port number
— replay boolean
— security-level keyword
— version keyword
— syslog string
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— description string
— facility keyword
— hostname
— use-system-name
— use-vprn-name
— value string
— log-prefix (keyword | string)
— port number
— severity keyword
— tls-client-profile reference
— management
— allow-ftp boolean
— allow-grpc boolean
— allow-netconf boolean
— allow-ssh boolean
— allow-telnet boolean
— allow-telnet6 boolean
— apply-groups reference
— apply-groups-exclude reference
— maximum-ipv4-routes
— log-only boolean
— threshold number
— value number
— maximum-ipv6-routes
— log-only boolean
— threshold number
— value number
— mc-maximum-routes
— log-only boolean
— threshold number
— value number
— mld
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— forwarding-group-interface forwarding-service string group-interface-name reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— query-source-address string
— router-alert-check boolean
— sub-hosts-only boolean
— subnet-check boolean
— version keyword
— group-if-query-source-address string
— group-interface reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— query-source-address string
— router-alert-check boolean
— sub-hosts-only boolean
— subnet-check boolean
— version keyword
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— mc-constraints
— level number
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— number-down number
— apply-groups reference
— apply-groups-exclude reference
— level number
— use-lag-port-weight boolean
— policy reference
— query-interval number
— query-last-member-interval number
— query-response-interval number
— router-alert-check boolean
— ssm-translate
— group-range start string end string
— apply-groups reference
— apply-groups-exclude reference
— source string
— static
— group string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— group-range start string end string step string
— apply-groups reference
— apply-groups-exclude reference
— source string
— starg
— version keyword
— query-interval number
— query-last-member-interval number
— query-response-interval number
— robust-count number
— ssm-translate
— group-range start string end string
— apply-groups reference
— apply-groups-exclude reference
— source string
— msdp
— active-source-limit number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— data-encapsulation boolean
— export-policy reference
— group string
— active-source-limit number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— export-policy reference
— import-policy reference
— local-address string
— mode keyword
— peer string
— active-source-limit number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— default-peer boolean
— export-policy reference
— import-policy reference
— local-address string
— receive-message-rate
— rate number
— threshold number
— time number
— receive-message-rate
— rate number
— threshold number
— time number
— import-policy reference
— local-address string
— peer string
— active-source-limit number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— default-peer boolean
— export-policy reference
— import-policy reference
— local-address string
— receive-message-rate
— rate number
— threshold number
— time number
— receive-message-rate
— rate number
— threshold number
— time number
— rpf-table keyword
— source string
— active-source-limit number
— apply-groups reference
— apply-groups-exclude reference
— source-active-cache-lifetime number
— mss-adjust
— apply-groups reference
— apply-groups-exclude reference
— nat-group number
— segment-size number
— mtrace2
— admin-state keyword
— udp-port number
— multicast-info-policy reference
— mvpn
— apply-groups reference
— apply-groups-exclude reference
— auto-discovery
— source-address string
— type keyword
— c-mcast-signaling keyword
— intersite-shared
— admin-state keyword
— kat-type5-advertisement-withdraw boolean
— persistent-type5-advertisement boolean
— mdt-type keyword
— provider-tunnel
— inclusive
— bier
— admin-state keyword
— sub-domain number
— bsr keyword
— mldp
— admin-state keyword
— p2mp-sr
— admin-state keyword
— bfd-leaf boolean
— bfd-root
— multiplier number
— transmit-interval number
— p2mp-policy boolean
— static-policy reference
— pim
— admin-state keyword
— group-address string
— hello-interval number
— hello-multiplier number
— improved-assert boolean
— mode keyword
— three-way-hello boolean
— tracking-support boolean
— rsvp
— admin-state keyword
— bfd-leaf boolean
— bfd-root
— multiplier number
— transmit-interval number
— lsp-template reference
— umh-rate-monitoring
— revertive-timer number
— traffic-rate-delta number
— wildcard-spmsi boolean
— selective
— asm-mdt boolean
— auto-discovery boolean
— bier
— admin-state keyword
— sub-domain number
— data-delay-interval number
— data-threshold
— group-prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— pe-threshold-add number
— pe-threshold-delete number
— threshold number
— join-tlv-packing boolean
— mldp
— admin-state keyword
— maximum-p2mp-spmsi number
— multistream-spmsi number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— group-prefix (ipv4-prefix | ipv6-prefix) source-prefix (ipv4-prefix | ipv6-prefix)
— lsp-template reference
— p2mp-sr
— p2mp-policy boolean
— static-policy reference
— pim
— group-address string
— mode keyword
— p2mp-sr
— admin-state keyword
— p2mp-policy boolean
— static-policy reference
— pim
— group-prefix string
— mode keyword
— rsvp
— admin-state keyword
— lsp-template reference
— maximum-p2mp-spmsi number
— umh-rate-monitoring
— group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— revertive-timer number
— traffic-rate-delta number
— redundant-source-list
— source-prefix (ipv4-prefix | ipv6-prefix)
— rpf-select
— core-mvpn reference
— apply-groups reference
— apply-groups-exclude reference
— group-prefix string
— apply-groups reference
— apply-groups-exclude reference
— starg boolean
— umh-pe-backup
— umh-pe string
— apply-groups reference
— apply-groups-exclude reference
— standby string
— umh-selection keyword
— vrf-export
— policy (policy-expr-string | string)
— unicast boolean
— vrf-import
— policy (policy-expr-string | string)
— unicast boolean
— vrf-target
— community string
— export
— community string
— unicast boolean
— import
— community string
— unicast boolean
— unicast boolean
— nat
— apply-groups reference
— apply-groups-exclude reference
— inside
— l2-aware
— force-unique-ip-addresses boolean
— subscribers string
— large-scale
— dnat-only
— source-prefix-list reference
— dual-stack-lite
— admin-state keyword
— deterministic
— prefix-map string nat-policy reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— map string to string
— apply-groups reference
— apply-groups-exclude reference
— first-outside-address string
— endpoint string
— apply-groups reference
— apply-groups-exclude reference
— ip-fragmentation keyword
— min-first-fragment-size-rx number
— reassembly boolean
— tunnel-mtu number
— max-subscriber-limit number
— subscriber-prefix-length number
— filters
— downstream
— ipv4 reference
— nat-policy reference
— nat44
— destination-prefix string
— apply-groups reference
— apply-groups-exclude reference
— nat-policy reference
— deterministic
— prefix-map string nat-policy reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— map string to string
— apply-groups reference
— apply-groups-exclude reference
— first-outside-address string
— max-subscriber-limit number
— nat-import reference
— source-prefix string
— apply-groups reference
— apply-groups-exclude reference
— nat-policy reference
— nat64
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— drop-zero-ipv4-checksum boolean
— insert-ipv6-fragment-header boolean
— ip-fragmentation keyword
— ipv6-mtu number
— prefix string
— subscriber-prefix-length number
— tos
— downstream
— use-ipv4 boolean
— upstream
— set-tos (keyword | number)
— redundancy
— peer string
— peer6 string
— steering-route string
— subscriber-identification
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— attribute
— type keyword
— vendor keyword
— description string
— drop-unidentified-traffic boolean
— radius-proxy-server
— router-instance string
— server string
— traffic-identification
— source-prefix-only boolean
— map
— map-domain reference
— outside
— dnat-only
— route-limit number
— filters
— downstream
— ipv4 reference
— ipv6 reference
— upstream
— ipv4 reference
— ipv6 reference
— mtu number
— pool string
— address-pooling keyword
— address-range string end string
— apply-groups reference
— apply-groups-exclude reference
— description string
— drain boolean
— admin-state keyword
— applications
— agnostic boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— icmp-echo-reply boolean
— l2-aware
— default-host
— inside-router-instance string
— ip-address string
— rate-limit number
— external-assignment boolean
— port-block-extension
— ports number
— subscriber
— watermarks
— high number
— low number
— subscriber-limit number
— watermarks
— high number
— low number
— large-scale
— default-host
— inside-router-instance string
— ip-address string
— rate-limit number
— deterministic
— port-reservation number
— watermarks
— high number
— low number
— redundancy
— admin-state keyword
— export-route string
— follow
— name string
— router-instance string
— monitor-route string
— subscriber-limit number
— mode keyword
— nat-group reference
— port-forwarding
— dynamic-block-reservation boolean
— range-end number
— range-start number
— port-reservation
— port-blocks number
— ports number
— type keyword
— watermarks
— high number
— low number
— wlan-gw-group reference
— network
— apply-groups reference
— apply-groups-exclude reference
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— fp-redirect-group reference
— instance number
— network-policy reference
— urpf-check boolean
— network-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— cflowd-parameters
— sampling keyword
— apply-groups reference
— apply-groups-exclude reference
— direction keyword
— sample-profile (keyword | number)
— type keyword
— cpu-protection reference
— description string
— dist-cpu-protection reference
— egress
— filter
— ip reference
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ingress
— filter
— ip reference
— ingress-stats boolean
— ip-mtu number
— ipv4
— allow-directed-broadcasts boolean
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— icmp
— mask-reply boolean
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— ttl-expired
— admin-state keyword
— number number
— seconds number
— unreachables
— admin-state keyword
— number number
— seconds number
— neighbor-discovery
— retry-timer number
— static-neighbor string
— apply-groups reference
— apply-groups-exclude reference
— mac-address string
— timeout number
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— prefix-length number
— secondary string
— apply-groups reference
— apply-groups-exclude reference
— broadcast keyword
— igp-inhibit boolean
— prefix-length number
— tcp-mss number
— urpf-check
— ignore-default boolean
— mode keyword
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— load-balancing
— flow-label-load-balancing boolean
— ip-load-balancing keyword
— lsr-load-balancing keyword
— spi-load-balancing boolean
— teid-load-balancing boolean
— loopback
— mac string
— port string
— qos
— apply-groups reference
— apply-groups-exclude reference
— egress-instance number
— egress-port-redirect-group reference
— ingress-fp-redirect-group reference
— ingress-instance number
— network-policy reference
— tos-marking-state keyword
— ntp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authenticate boolean
— authentication-check boolean
— authentication-key number
— apply-groups reference
— apply-groups-exclude reference
— key string
— type keyword
— broadcast reference
— apply-groups reference
— apply-groups-exclude reference
— key-id reference
— ttl number
— version number
— ospf number
— admin-state keyword
— advertise-router-capability keyword
— apply-groups reference
— apply-groups-exclude reference
— area string
— advertise-ne-profile reference
— advertise-router-capability boolean
— apply-groups reference
— apply-groups-exclude reference
— area-range string
— advertise boolean
— apply-groups reference
— apply-groups-exclude reference
— blackhole-aggregate boolean
— export-policy reference
— import-policy reference
— interface string
— admin-state keyword
— advertise-router-capability boolean
— advertise-subnet boolean
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-keychain reference
— authentication-type keyword
— bfd-liveness
— remain-down-on-failure boolean
— strict boolean
— strict-mode-holddown number
— dead-interval number
— hello-interval number
— interface-type keyword
— load-balancing-weight number
— loopfree-alternate
— exclude boolean
— policy-map
— route-nh-template reference
— lsa-filter-out keyword
— message-digest-key number
— apply-groups reference
— apply-groups-exclude reference
— md5 string
— metric number
— mtu number
— neighbor string
— passive boolean
— poll-interval number
— priority number
— retransmit-interval number
— rib-priority keyword
— transit-delay number
— loopfree-alternate-exclude boolean
— nssa
— area-range string
— advertise boolean
— apply-groups reference
— apply-groups-exclude reference
— originate-default-route
— adjacency-check boolean
— type-nssa boolean
— redistribute-external boolean
— summaries boolean
— sham-link string ip-address string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-keychain reference
— authentication-type keyword
— dead-interval number
— hello-interval number
— message-digest-key number
— apply-groups reference
— apply-groups-exclude reference
— md5 string
— metric number
— retransmit-interval number
— transit-delay number
— stub
— default-metric number
— summaries boolean
— virtual-link string transit-area reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-keychain reference
— authentication-type keyword
— dead-interval number
— hello-interval number
— message-digest-key number
— apply-groups reference
— apply-groups-exclude reference
— md5 string
— retransmit-interval number
— transit-delay number
— compatible-rfc1583 boolean
— export-limit
— log-percent number
— number number
— export-policy reference
— external-db-overflow
— interval number
— limit number
— external-preference number
— graceful-restart
— helper-mode boolean
— strict-lsa-checking boolean
— ignore-dn-bit boolean
— import-policy reference
— loopfree-alternate
— exclude
— prefix-policy reference
— multicast-import boolean
— overload boolean
— overload-include-ext-1 boolean
— overload-include-ext-2 boolean
— overload-include-stub boolean
— overload-on-boot
— timeout number
— preference number
— reference-bandwidth number
— rib-priority
— high
— prefix-list reference
— router-id string
— rtr-adv-lsa-limit
— log-only boolean
— max-lsa-count number
— overload-timeout (number | keyword)
— warning-threshold number
— super-backbone boolean
— suppress-dn-bit boolean
— timers
— incremental-spf-wait number
— lsa-accumulate number
— lsa-arrival number
— lsa-generate
— lsa-initial-wait number
— lsa-second-wait number
— max-lsa-wait number
— redistribute-delay number
— spf-wait
— spf-initial-wait number
— spf-max-wait number
— spf-second-wait number
— unicast-import boolean
— vpn-domain
— id string
— type keyword
— vpn-tag number
— ospf3 number
— admin-state keyword
— advertise-router-capability keyword
— apply-groups reference
— apply-groups-exclude reference
— area string
— advertise-router-capability boolean
— apply-groups reference
— apply-groups-exclude reference
— area-range (ipv4-prefix | ipv6-prefix)
— advertise boolean
— apply-groups reference
— apply-groups-exclude reference
— blackhole-aggregate boolean
— export-policy reference
— import-policy reference
— interface string
— admin-state keyword
— advertise-router-capability boolean
— apply-groups reference
— apply-groups-exclude reference
— authentication
— inbound reference
— outbound reference
— bfd-liveness
— remain-down-on-failure boolean
— strict boolean
— strict-mode-holddown number
— dead-interval number
— hello-interval number
— interface-type keyword
— load-balancing-weight number
— loopfree-alternate
— exclude boolean
— policy-map
— route-nh-template reference
— lsa-filter-out keyword
— metric number
— mtu number
— neighbor (ipv4-address-no-zone | ipv6-address-no-zone)
— passive boolean
— poll-interval number
— priority number
— retransmit-interval number
— rib-priority keyword
— transit-delay number
— key-rollover-interval number
— loopfree-alternate-exclude boolean
— nssa
— area-range (ipv4-prefix | ipv6-prefix)
— advertise boolean
— apply-groups reference
— apply-groups-exclude reference
— originate-default-route
— adjacency-check boolean
— type-nssa boolean
— redistribute-external boolean
— summaries boolean
— stub
— default-metric number
— summaries boolean
— virtual-link string transit-area reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication
— inbound reference
— outbound reference
— dead-interval number
— hello-interval number
— retransmit-interval number
— transit-delay number
— export-limit
— log-percent number
— number number
— export-policy reference
— external-db-overflow
— interval number
— limit number
— external-preference number
— graceful-restart
— helper-mode boolean
— strict-lsa-checking boolean
— ignore-dn-bit boolean
— import-policy reference
— loopfree-alternate
— exclude
— prefix-policy reference
— multicast-import boolean
— overload boolean
— overload-include-ext-1 boolean
— overload-include-ext-2 boolean
— overload-include-stub boolean
— overload-on-boot
— timeout number
— preference number
— reference-bandwidth number
— rib-priority
— high
— prefix-list reference
— router-id string
— rtr-adv-lsa-limit
— log-only boolean
— max-lsa-count number
— overload-timeout (number | keyword)
— warning-threshold number
— suppress-dn-bit boolean
— timers
— incremental-spf-wait number
— lsa-accumulate number
— lsa-arrival number
— lsa-generate
— lsa-initial-wait number
— lsa-second-wait number
— max-lsa-wait number
— redistribute-delay number
— spf-wait
— spf-initial-wait number
— spf-max-wait number
— spf-second-wait number
— unicast-import boolean
— pcp
— server string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dual-stack-lite-address string
— fwd-inside-router string
— interface reference
— policy reference
— pim
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— apply-to keyword
— bgp-nh-override boolean
— import
— join-policy reference
— register-policy reference
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— assert-period number
— bfd-liveness
— ipv4 boolean
— ipv6 boolean
— bsm-check-rtr-alert boolean
— hello-interval number
— hello-multiplier number
— improved-assert boolean
— instant-prune-echo boolean
— ipv4
— apply-groups reference
— apply-groups-exclude reference
— monitor-oper-group
— name reference
— operation keyword
— priority-delta number
— multicast boolean
— ipv6
— apply-groups reference
— apply-groups-exclude reference
— monitor-oper-group
— name reference
— operation keyword
— priority-delta number
— multicast boolean
— max-groups number
— mcac
— bandwidth
— mandatory (number | keyword)
— total (number | keyword)
— interface-policy reference
— mc-constraints
— admin-state keyword
— level number
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— number-down number
— apply-groups reference
— apply-groups-exclude reference
— level number
— use-lag-port-weight boolean
— policy reference
— multicast-senders keyword
— p2mp-ldp-tree-join
— ipv4 boolean
— ipv6 boolean
— priority number
— sticky-dr
— priority number
— three-way-hello boolean
— tracking-support boolean
— ipv4
— admin-state keyword
— grt-extranet
— any
— group-prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— starg boolean
— rpf-table keyword
— source-address
— register-message string
— ssm-assert-compatible-mode boolean
— ssm-default-range boolean
— ipv6
— admin-state keyword
— rpf-table keyword
— source-address
— register-message string
— ssm-default-range boolean
— mc-ecmp-balance boolean
— mc-ecmp-balance-hold number
— mc-ecmp-hashing
— rebalance boolean
— mtu-over-head number
— non-dr-attract-traffic boolean
— rp
— bootstrap
— export reference
— import reference
— ipv4
— anycast string rp-set-peer string
— auto-rp-discovery boolean
— bsr-candidate
— address string
— admin-state keyword
— hash-mask-len number
— priority number
— candidate boolean
— mapping-agent boolean
— rp-candidate
— address string
— admin-state keyword
— group-range string
— holdtime number
— priority number
— static
— address string
— apply-groups reference
— apply-groups-exclude reference
— group-prefix string
— override boolean
— ipv6
— anycast string rp-set-peer string
— bsr-candidate
— address string
— admin-state keyword
— hash-mask-len number
— priority number
— embedded-rp
— admin-state keyword
— group-range string
— rp-candidate
— address string
— admin-state keyword
— group-range string
— holdtime number
— priority number
— static
— address string
— apply-groups reference
— apply-groups-exclude reference
— group-prefix string
— override boolean
— spt-switchover (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— threshold (number | keyword)
— ssm-groups
— group-range (ipv4-prefix | ipv6-prefix)
— radius
— apply-groups reference
— apply-groups-exclude reference
— proxy string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— attribute-matching
— entry number
— accounting-server-policy string
— apply-groups reference
— apply-groups-exclude reference
— authentication-server-policy string
— prefix-string string
— suffix-string string
— type number
— vendor (number | keyword)
— cache
— admin-state keyword
— key
— attribute-type number
— packet-type keyword
— vendor (number | keyword)
— timeout number
— track-accounting
— accounting-off boolean
— accounting-on boolean
— interim-update boolean
— start boolean
— stop boolean
— track-authentication
— accept boolean
— track-delete-hold-time number
— defaults
— accounting-server-policy string
— authentication-server-policy string
— description string
— interface reference
— load-balance-key
— attribute-1
— type number
— vendor (number | keyword)
— attribute-2
— type number
— vendor (number | keyword)
— attribute-3
— type number
— vendor (number | keyword)
— attribute-4
— type number
— vendor (number | keyword)
— attribute-5
— type number
— vendor (number | keyword)
— source-ip-udp
— purpose keyword
— python-policy reference
— secret string
— send-accounting-response boolean
— wlan-gw
— address string
— apply-groups reference
— apply-groups-exclude reference
— ipv6-address string
— wlan-gw-group reference
— server string
— accept-coa boolean
— acct-port number
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— auth-port number
— description string
— pending-requests-limit number
— python-policy reference
— secret string
— reassembly
— apply-groups reference
— apply-groups-exclude reference
— nat-group number
— to-base-network boolean
— redundant-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ip-mtu number
— ipv4
— primary
— address string
— apply-groups reference
— apply-groups-exclude reference
— prefix-length number
— remote-ip string
— spoke-sdp string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— control-word boolean
— description string
— egress
— filter
— ip reference
— vc-label number
— ingress
— filter
— ip reference
— vc-label number
— rip
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-type keyword
— bfd-liveness boolean
— check-zero boolean
— description string
— export-limit
— log-percent number
— number number
— export-policy reference
— group string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-type keyword
— bfd-liveness boolean
— check-zero boolean
— description string
— export-policy reference
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— neighbor string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authentication-key string
— authentication-type keyword
— bfd-liveness boolean
— check-zero boolean
— description string
— export-policy reference
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— preference number
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— unicast-address string
— preference number
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— preference number
— propagate-metric boolean
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— ripng
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness boolean
— check-zero boolean
— description string
— export-limit
— log-percent number
— number number
— export-policy reference
— group string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness boolean
— check-zero boolean
— description string
— export-policy reference
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— neighbor reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness boolean
— check-zero boolean
— description string
— export-policy reference
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— preference number
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— unicast-address string
— preference number
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— import-policy reference
— message-size number
— metric-in number
— metric-out number
— preference number
— receive keyword
— send keyword
— split-horizon boolean
— timers
— flush number
— timeout number
— update number
— router-id string
— segment-routing-v6 number
— apply-groups reference
— apply-groups-exclude reference
— locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— end-dt4
— value number
— end-dt46
— value number
— end-dt6
— value number
— micro-segment-locator reference
— apply-groups reference
— apply-groups-exclude reference
— function
— udt4
— value number
— udt46
— value number
— udt6
— value number
— selective-fib boolean
— service-id number
— sfm-overload
— holdoff-time number
— sgt-qos
— dot1p
— application keyword
— apply-groups reference
— apply-groups-exclude reference
— dot1p (keyword | number)
— dscp
— application keyword
— apply-groups reference
— apply-groups-exclude reference
— dscp (keyword | number)
— dscp-map keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— snmp
— access boolean
— community string
— access-permissions keyword
— apply-groups reference
— apply-groups-exclude reference
— source-access-list reference
— version keyword
— source-address
— ipv4 keyword
— address string
— apply-groups reference
— apply-groups-exclude reference
— interface-name string
— ipv6 keyword
— address string
— apply-groups reference
— apply-groups-exclude reference
— spoke-sdp string
— apply-groups reference
— apply-groups-exclude reference
— description string
— static-routes
— apply-groups reference
— apply-groups-exclude reference
— hold-down
— initial number
— max-value number
— multiplier number
— route (ipv4-prefix | ipv6-prefix) route-type keyword
— apply-groups reference
— apply-groups-exclude reference
— backup-tag number
— blackhole
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— community string
— description string
— generate-icmp boolean
— metric number
— preference number
— prefix-list
— flag keyword
— name reference
— tag number
— community string
— grt
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— metric number
— preference number
— indirect (ipv4-address-no-zone | ipv6-address-no-zone)
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— community string
— cpe-check (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— drop-count number
— interval number
— log boolean
— padding-size number
— description string
— destination-class number
— metric number
— preference number
— prefix-list
— flag keyword
— name reference
— qos
— forwarding-class keyword
— priority keyword
— source-class number
— tag number
— interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— community string
— cpe-check (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— drop-count number
— interval number
— log boolean
— padding-size number
— description string
— destination-class number
— load-balancing-weight number
— metric number
— preference number
— prefix-list
— flag keyword
— name reference
— qos
— forwarding-class keyword
— priority keyword
— source-class number
— tag number
— ipsec-tunnel string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— community string
— description string
— destination-class number
— metric number
— preference number
— qos
— forwarding-class keyword
— priority keyword
— source-class number
— tag number
— next-hop (ipv4-address-with-zone | ipv6-address-with-zone)
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— backup-next-hop
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— bfd-liveness boolean
— community string
— cpe-check (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— drop-count number
— interval number
— log boolean
— padding-size number
— description string
— destination-class number
— load-balancing-weight number
— metric number
— preference number
— prefix-list
— flag keyword
— name reference
— qos
— forwarding-class keyword
— priority keyword
— source-class number
— tag number
— validate-next-hop boolean
— tag number
— subscriber-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— fwd-service reference
— fwd-subscriber-interface reference
— group-interface string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bonding-parameters
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— connection number
— apply-groups reference
— apply-groups-exclude reference
— service string
— fpe reference
— multicast
— connection (number | keyword)
— brg
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— authenticated-brg-only boolean
— default-brg-profile reference
— cflowd-parameters
— sampling keyword
— apply-groups reference
— apply-groups-exclude reference
— direction keyword
— sample-profile (keyword | number)
— type keyword
— data-trigger
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dynamic-routes-track-srrp
— hold-time number
— gtp-parameters
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— fpe reference
— gx-policy reference
— ingress
— policy-accounting reference
— ingress-stats boolean
— ip-mtu number
— ipoe-linking
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gratuitous-router-advertisement boolean
— shared-circuit-id boolean
— ipoe-session
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— force-auth
— cid-change boolean
— rid-change boolean
— ipoe-session-policy reference
— min-auth-interval (keyword | number)
— radius-session-timeout keyword
— sap-session-limit number
— session-limit number
— stateless-redundancy boolean
— user-db reference
— ipv4
— arp-host
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— host-limit number
— min-auth-interval number
— sap-host-limit number
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— client-applications
— dhcp boolean
— ppp boolean
— description string
— filter reference
— gi-address string
— lease-populate
— l2-header
— mac string
— max-leases number
— match-circuit-id boolean
— offer-selection
— client-mac
— discover-delay number
— mac-address keyword
— discover-delay number
— server string
— apply-groups reference
— apply-groups-exclude reference
— discover-delay number
— option-82
— action keyword
— circuit-id
— ascii-tuple
— ifindex
— none
— sap-id
— vlan-ascii-tuple
— remote-id
— ascii-string string
— mac
— none
— vendor-specific-option
— client-mac-address boolean
— pool-name boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— trusted boolean
— user-db reference
— icmp
— mask-reply boolean
— param-problem
— admin-state keyword
— number number
— seconds number
— redirects
— admin-state keyword
— number number
— seconds number
— ttl-expired
— admin-state keyword
— number number
— seconds number
— use-matching-address boolean
— unreachables
— admin-state keyword
— number number
— seconds number
— ignore-df-bit boolean
— neighbor-discovery
— local-proxy-arp boolean
— populate boolean
— proxy-arp-policy reference
— remote-proxy-arp boolean
— timeout number
— qos-route-lookup keyword
— urpf-check
— mode keyword
— ipv6
— allow-multiple-wan-addresses boolean
— auto-reply
— neighbor-solicitation boolean
— router-solicitation boolean
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— filter reference
— option
— apply-groups reference
— apply-groups-exclude reference
— interface-id
— ascii-tuple
— if-index
— sap-id
— string string
— remote-id boolean
— override-slaac boolean
— pd-managed-route
— next-hop keyword
— proxy-server
— admin-state keyword
— client-applications
— dhcp boolean
— ppp boolean
— preferred-lifetime (number | keyword)
— rebind-timer number
— renew-timer number
— server-id
— apply-groups reference
— apply-groups-exclude reference
— duid-en-ascii string
— duid-en-hex string
— duid-ll
— valid-lifetime (number | keyword)
— python-policy reference
— relay
— admin-state keyword
— advertise-selection
— client-mac
— mac-address keyword
— preference-option
— value number
— solicit-delay number
— preference-option
— value number
— server string
— apply-groups reference
— apply-groups-exclude reference
— preference-option
— value number
— solicit-delay number
— solicit-delay number
— client-applications
— dhcp boolean
— ppp boolean
— description string
— lease-split
— admin-state keyword
— valid-lifetime number
— link-address string
— server string
— source-address string
— snooping
— admin-state keyword
— user-db reference
— user-ident keyword
— ipoe-bridged-mode boolean
— neighbor-discovery
— apply-groups reference
— apply-groups-exclude reference
— dad-snooping boolean
— neighbor-limit number
— qos-route-lookup keyword
— router-advertisements
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— force-mcast keyword
— max-advertisement-interval number
— min-advertisement-interval number
— options
— current-hop-limit number
— dns
— include-rdnss boolean
— rdnss-lifetime (number | keyword)
— managed-configuration boolean
— mtu (number | keyword)
— other-stateful-configuration boolean
— reachable-time number
— retransmit-timer number
— router-lifetime (number | keyword)
— prefix-options
— autonomous boolean
— on-link boolean
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— router-solicit
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— inactivity-timer (number | keyword)
— min-auth-interval number
— user-db reference
— urpf-check
— mode keyword
— local-address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— client-applications
— ipoe boolean
— ppp boolean
— default-pool string
— server reference
— ipv6
— client-applications
— ipoe-slaac boolean
— ipoe-wan boolean
— ppp-slaac boolean
— server reference
— mac string
— nasreq-auth-policy reference
— oper-up-while-empty boolean
— pppoe
— admin-state keyword
— anti-spoof keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— dhcp-client
— client-id keyword
— policy reference
— python-policy reference
— sap-session-limit number
— session-limit number
— user-db reference
— radius-auth-policy reference
— redundant-interface reference
— sap string
— accounting-policy reference
— admin-state keyword
— anti-spoof keyword
— app-profile reference
— apply-groups reference
— apply-groups-exclude reference
— calling-station-id string
— collect-stats boolean
— cpu-protection
— eth-cfm-monitoring
— aggregate
— car
— ip-src-monitoring
— mac-monitoring
— policy-id reference
— default-host
— ipv4 reference prefix-length number
— apply-groups reference
— apply-groups-exclude reference
— next-hop string
— ipv6 string prefix-length number
— apply-groups reference
— apply-groups-exclude reference
— next-hop string
— description string
— dist-cpu-protection reference
— egress
— agg-rate
— adaptation-rule keyword
— burst-limit (number | keyword)
— limit-unused-bandwidth boolean
— queue-frame-based-accounting boolean
— rate number
— filter
— ip reference
— ipv6 reference
— qos
— policer-control-policy
— policy-name reference
— qinq-mark-top-only boolean
— sap-egress
— policy-name reference
— scheduler-policy
— policy-name reference
— eth-cfm
— apply-groups reference
— apply-groups-exclude reference
— collect-lmm-fc-stats
— fc keyword
— fc-in-profile keyword
— collect-lmm-stats boolean
— mep md-admin-name reference ma-admin-name reference mep-id number
— admin-state keyword
— ais boolean
— alarm-notification
— fng-alarm-time number
— fng-reset-time number
— apply-groups reference
— apply-groups-exclude reference
— ccm boolean
— ccm-ltm-priority number
— ccm-padding-size number
— csf
— multiplier decimal-number
— description string
— eth-test
— bit-error-threshold number
— test-pattern
— crc-tlv boolean
— pattern keyword
— fault-propagation keyword
— grace
— eth-ed
— max-rx-defect-window number
— priority number
— rx-eth-ed boolean
— tx-eth-ed boolean
— eth-vsm-grace
— rx-eth-vsm-grace boolean
— tx-eth-vsm-grace boolean
— low-priority-defect keyword
— one-way-delay-threshold number
— squelch-ingress-levels number
— fwd-wholesale
— pppoe-service reference
— host-admin-state keyword
— host-lockout-policy reference
— igmp-host-tracking
— apply-groups reference
— apply-groups-exclude reference
— expiry-time number
— import-policy reference
— maximum-number-group-sources number
— maximum-number-groups number
— maximum-number-sources number
— router-alert-check boolean
— ingress
— filter
— ip reference
— ipv6 reference
— qos
— match-qinq-dot1p keyword
— policer-control-policy
— policy-name reference
— sap-ingress
— policy-name reference
— queuing-type keyword
— scheduler-policy
— policy-name reference
— lag
— link-map-profile number
— per-link-hash
— class number
— weight number
— monitor-oper-group reference
— multi-service-site reference
— oper-group reference
— static-host
— ipv4 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— scope keyword
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— managed-route string
— apply-groups reference
— apply-groups-exclude reference
— cpe-check
— apply-groups reference
— apply-groups-exclude reference
— destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— drop-count number
— failed-action
— metric number
— preference number
— tag number
— withdraw boolean
— interval number
— log boolean
— padding-size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— metric number
— preference number
— tag number
— rip-policy reference
— shcv
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— ipv6 string mac string
— admin-state keyword
— ancp-string string
— app-profile
— profile reference
— scope keyword
— apply-groups reference
— apply-groups-exclude reference
— int-dest-id string
— mac-linking string
— managed-route string
— apply-groups reference
— apply-groups-exclude reference
— cpe-check
— apply-groups reference
— apply-groups-exclude reference
— destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— drop-count number
— failed-action
— metric number
— preference number
— tag number
— withdraw boolean
— interval number
— log boolean
— padding-size number
— source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
— timeout number
— metric number
— preference number
— tag number
— retail-svc-id number
— shcv
— sla-profile reference
— sub-profile reference
— subscriber-id
— string string
— use-sap-id
— mac-learning
— data-triggered boolean
— single-mac boolean
— sub-sla-mgmt
— admin-state keyword
— defaults
— app-profile reference
— int-dest-id
— string string
— top-q-tag
— sla-profile reference
— sub-profile reference
— subscriber-id
— auto-id
— sap-id
— string string
— single-sub-parameters
— non-sub-traffic
— app-profile reference
— sla-profile reference
— sub-profile reference
— subscriber-id string
— profiled-traffic-only boolean
— sub-ident-policy reference
— subscriber-limit (keyword | number)
— sap-parameters
— anti-spoof keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— sub-sla-mgmt
— defaults
— app-profile reference
— sla-profile reference
— sub-profile reference
— subscriber-id
— auto-id
— string string
— sub-ident-policy reference
— shcv-policy reference
— shcv-policy-ipv4 reference
— shcv-policy-ipv6 reference
— srrp number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— bfd-liveness
— apply-groups reference
— apply-groups-exclude reference
— dest-ip string
— interface-name string
— service-name string
— description string
— gw-mac string
— keep-alive-interval number
— message-path reference
— monitor-oper-group
— group-name reference
— priority-step number
— one-garp-per-sap boolean
— policy reference
— preempt boolean
— priority number
— send-fib-population-packets keyword
— suppress-aa-sub boolean
— tos-marking-state keyword
— type keyword
— wlan-gw
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— purpose
— xconnect boolean
— gateway-router string
— group-encryption
— encryption-keygroup-inbound reference
— encryption-keygroup-outbound reference
— l2-ap
— access-point string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— encap-type keyword
— epipe-sap-template reference
— auto-sub-id-fmt keyword
— default-encap-type keyword
— lanext
— max-bd number
— learn-ap-mac
— delay-auth boolean
— mobility
— hold-time number
— inter-tunnel-type boolean
— inter-vlan boolean
— trigger
— control boolean
— data boolean
— iapp boolean
— oper-down-on-group-degrade boolean
— tcp-mss-adjust number
— tunnel-egress-qos
— admin-state keyword
— agg-rate-limit (number | keyword)
— granularity keyword
— hold-time (number | keyword)
— multi-client-only boolean
— qos reference
— scheduler-policy reference
— tunnel-encaps
— learn-l2tp-cookie (keyword | hex-string)
— vlan-range string
— apply-groups reference
— apply-groups-exclude reference
— authentication
— hold-time number
— local
— coa-policy reference
— default-ue-state keyword
— on-control-plane boolean
— policy reference
— vlan-mismatch-timeout number
— data-triggered-ue-creation
— admin-state keyword
— arp boolean
— create-proxy-cache-entry
— mac-format string
— proxy-server
— name string
— router-instance string
— ospf boolean
— dhcp4
— admin-state keyword
— dns string
— l2-aware-ip-address (ipv4-unicast-address | keyword)
— lease-time
— active number
— initial number
— nbns string
— dhcp6
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— preferred-lifetime
— active number
— initial number
— valid-lifetime
— active number
— initial number
— dsm
— accounting-policy reference
— accounting-update
— interval number
— admin-state keyword
— application-assurance
— accounting-statistics boolean
— profile reference
— url-parameter string
— apply-groups reference
— apply-groups-exclude reference
— egress
— policer reference
— ingress
— ip-filter reference
— policer reference
— soft-quota-exhausted-filter reference
— one-time-redirect
— port number
— url string
— volume-quota-direction keyword
— dynamic-service boolean
— extension string
— http-redirect-policy reference
— idle-timeout-action keyword
— l2-service
— admin-state keyword
— description string
— service reference
— nat-policy reference
— retail-service string
— slaac
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— preferred-lifetime
— active number
— initial number
— valid-lifetime
— active number
— initial number
— vrgw
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— brg
— authenticated-brg-only boolean
— default-brg-profile reference
— lanext
— access
— max-mac number
— multi-access boolean
— policer reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— assistive-address-resolution boolean
— bd-mac-prefix string
— mac-translation boolean
— network
— admin-state keyword
— max-mac number
— policer reference
— xconnect
— accounting
— mobility-updates boolean
— policy reference
— update-interval number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— wlan-gw-group reference
— wpp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— initial
— app-profile reference
— sla-profile reference
— sub-profile reference
— lease-time number
— portal
— name string
— portal-group reference
— router-instance string
— restore-to-initial-on-disconnect boolean
— triggered-hosts boolean
— user-db reference
— hold-time
— ipv4
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipv6
— down
— init-only boolean
— seconds number
— up
— seconds number
— ipoe-linking
— apply-groups reference
— apply-groups-exclude reference
— gratuitous-router-advertisement boolean
— ipoe-session
— apply-groups reference
— apply-groups-exclude reference
— session-limit number
— ipv4
— address string
— apply-groups reference
— apply-groups-exclude reference
— gateway string
— holdup-time number
— populate-host-routes boolean
— prefix-length number
— track-srrp number
— allow-unmatching-subnets boolean
— arp-host
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— host-limit number
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— default-dns string
— dhcp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— client-applications
— dhcp boolean
— ppp boolean
— description string
— gi-address string
— lease-populate
— max-leases number
— offer-selection
— client-mac
— discover-delay number
— mac-address keyword
— discover-delay number
— server string
— apply-groups reference
— apply-groups-exclude reference
— discover-delay number
— option-82
— vendor-specific-option
— client-mac-address boolean
— sap-id boolean
— service-id boolean
— string string
— system-id boolean
— proxy-server
— admin-state keyword
— emulated-server string
— lease-time
— radius-override boolean
— value number
— python-policy reference
— relay-proxy
— release-update-src-ip boolean
— siaddr-override string
— release-include-gi-address boolean
— server string
— src-ip-addr keyword
— virtual-subnet boolean
— export-host-routes boolean
— unnumbered
— ip-address string
— ip-int-name string
— ipv6
— address string
— apply-groups reference
— apply-groups-exclude reference
— host-type keyword
— prefix-length number
— allow-multiple-wan-addresses boolean
— allow-unmatching-prefixes boolean
— bfd
— admin-state keyword
— echo-receive number
— multiplier number
— receive number
— transmit-interval number
— type keyword
— default-dns string
— delegated-prefix-length (number | keyword)
— dhcp6
— apply-groups reference
— apply-groups-exclude reference
— override-slaac boolean
— pd-managed-route
— next-hop keyword
— proxy-server
— admin-state keyword
— client-applications
— dhcp boolean
— ppp boolean
— preferred-lifetime (number | keyword)
— rebind-timer number
— renew-timer number
— server-id
— apply-groups reference
— apply-groups-exclude reference
— duid-en-ascii string
— duid-en-hex string
— duid-ll
— valid-lifetime (number | keyword)
— python-policy reference
— relay
— admin-state keyword
— advertise-selection
— client-mac
— mac-address keyword
— preference-option
— value number
— solicit-delay number
— preference-option
— value number
— server string
— apply-groups reference
— apply-groups-exclude reference
— preference-option
— value number
— solicit-delay number
— solicit-delay number
— client-applications
— dhcp boolean
— ppp boolean
— description string
— lease-split
— admin-state keyword
— valid-lifetime number
— link-address string
— server string
— source-address string
— ipoe-bridged-mode boolean
— link-local-address
— address string
— prefix string
— apply-groups reference
— apply-groups-exclude reference
— holdup-time number
— host-type keyword
— track-srrp number
— router-advertisements
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— force-mcast keyword
— max-advertisement-interval number
— min-advertisement-interval number
— options
— current-hop-limit number
— dns
— include-rdnss boolean
— rdnss-lifetime (number | keyword)
— managed-configuration boolean
— mtu (number | keyword)
— other-stateful-configuration boolean
— reachable-time number
— retransmit-timer number
— router-lifetime (number | keyword)
— prefix-options
— autonomous boolean
— on-link boolean
— preferred-lifetime (number | keyword)
— valid-lifetime (number | keyword)
— router-solicit
— apply-groups reference
— apply-groups-exclude reference
— inactivity-timer (number | keyword)
— local-address-assignment
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ipv4
— client-applications
— ppp boolean
— default-pool string
— server reference
— ipv6
— client-applications
— ipoe-slaac boolean
— ipoe-wan boolean
— ppp-slaac boolean
— server reference
— pppoe
— apply-groups reference
— apply-groups-exclude reference
— description string
— session-limit number
— private-retail-subnets boolean
— wan-mode keyword
— wlan-gw
— apply-groups reference
— apply-groups-exclude reference
— pool-manager
— apply-groups reference
— apply-groups-exclude reference
— dhcp6-client
— dhcpv4-nat
— admin-state keyword
— link-address string
— pool-name string
— ia-na
— admin-state keyword
— link-address string
— pool-name string
— lease-query
— max-retries number
— servers string
— slaac
— admin-state keyword
— link-address string
— pool-name string
— source-ip (keyword | ipv6-address)
— watermarks
— high number
— low number
— wlan-gw-group reference
— redundancy
— admin-state keyword
— export string
— monitor string
— subscriber-mgmt
— apply-groups reference
— apply-groups-exclude reference
— dhcpv4
— apply-groups reference
— apply-groups-exclude reference
— routed-subnet-transparent-forward boolean
— multi-chassis-shunt-id number
— up-resiliency
— monitor-oper-group reference
— apply-groups reference
— apply-groups-exclude reference
— health-drop number
— ttl-propagate
— local keyword
— transit keyword
— twamp-light
— apply-groups reference
— apply-groups-exclude reference
— reflector
— admin-state keyword
— allow-ipv6-udp-checksum-zero boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— description string
— type keyword
— udp-port number
— video-interface string
— accounting-policy reference
— address string
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— channel string source string
— apply-groups reference
— apply-groups-exclude reference
— channel-name string
— description string
— scte35-action keyword
— zone-channel string zone-source string
— adi-channel-name string
— apply-groups reference
— apply-groups-exclude reference
— cpu-protection reference
— description string
— multicast-service number
— output-format keyword
— video-sap
— apply-groups reference
— apply-groups-exclude reference
— egress
— apply-groups reference
— apply-groups-exclude reference
— filter
— ip reference
— qos
— policy-name reference
— ingress
— apply-groups reference
— apply-groups-exclude reference
— filter
— ip reference
— qos
— policy-name reference
— video-group-id reference
— vprn-type keyword
— vxlan
— tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone)
— apply-groups reference
— apply-groups-exclude reference
— fpe-id reference
— weighted-ecmp keyword
— wlan-gw
— apply-groups reference
— apply-groups-exclude reference
— distributed-subscriber-mgmt
— apply-groups reference
— apply-groups-exclude reference
— ipv6-tcp-mss-adjust number
— mobility-triggered-accounting
— admin-state keyword
— hold-down number
— include-counters boolean
— xconnect
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— tunnel-source-ip string
— wlan-gw-group reference
— wpp
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— portal string
— ack-auth-retry-count number
— address (ipv4-address-no-zone | ipv6-address-no-zone)
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ntf-logout-retry-count number
— port-format keyword
— retry-interval number
— secret string
— version number
service command descriptions
service
cpipe [service-name] string
[service-name] string
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service cpipe string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
customer reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service customer ID | |
| Context | configure service cpipe string customer reference | |
| Tree | customer | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
description string
| Synopsis | Text description | |
| Context | configure service cpipe string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
endpoint [name] string
[name] string
description string
| Synopsis | Text description | |
| Context | configure service cpipe string endpoint string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
hold-time-active number
| Synopsis | Time before entering standby when MC-LAG SAP goes down | |
| Context | configure service cpipe string endpoint string hold-time-active number | |
| Tree | hold-time-active | |
| Range | 1 to 60 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
revert-time (number | keyword)
| Synopsis | Time to wait before reverting to primary spoke SDP | |
| Context | configure service cpipe string endpoint string revert-time (number | keyword) | |
| Tree | revert-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Options | ||
| Default | immediate | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
sap [sap-id] string
[sap-id] string
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service cpipe string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service cpipe string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cem
packet
jitter-buffer number
| Synopsis | Jitter buffer size | |
| Context | configure service cpipe string sap string cem packet jitter-buffer number | |
| Tree | jitter-buffer | |
| Range | 1 to 250 | |
| Units | milliseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
payload-size number
| Synopsis | Size of payload packets transmitted to PSN by CEM SAP | |
| Context | configure service cpipe string sap string cem packet payload-size number | |
| Tree | payload-size | |
| Range | 2 to 1514 | |
| Units | bytes | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
report-alarm
| Synopsis | Enter the report-alarm context | |
| Context | configure service cpipe string sap string cem report-alarm | |
| Tree | report-alarm | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
buffer-overrun boolean
| Synopsis | Report alarm for buffer overrun | |
| Context | configure service cpipe string sap string cem report-alarm buffer-overrun boolean | |
| Tree | buffer-overrun | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
buffer-underrun boolean
| Synopsis | Report alarm for buffer underrun | |
| Context | configure service cpipe string sap string cem report-alarm buffer-underrun boolean | |
| Tree | buffer-underrun | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
malformed-packets boolean
| Synopsis | Report alarm for malformed packets | |
| Context | configure service cpipe string sap string cem report-alarm malformed-packets boolean | |
| Tree | malformed-packets | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
packet-loss boolean
| Synopsis | Report remote peer is currently in packet loss status | |
| Context | configure service cpipe string sap string cem report-alarm packet-loss boolean | |
| Tree | packet-loss | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
remote-fault boolean
| Synopsis | Report remote TDM interface is currently not in service | |
| Context | configure service cpipe string sap string cem report-alarm remote-fault boolean | |
| Tree | remote-fault | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
remote-packet-loss boolean
| Synopsis | Report remote peer is currently in packet loss status | |
| Context | configure service cpipe string sap string cem report-alarm remote-packet-loss boolean | |
| Tree | remote-packet-loss | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
remote-rdi boolean
| Synopsis | Report remote TDM interface is currently in RDI status | |
| Context | configure service cpipe string sap string cem report-alarm remote-rdi boolean | |
| Tree | remote-rdi | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
stray-packets boolean
| Synopsis | Report alarm for stray packets | |
| Context | configure service cpipe string sap string cem report-alarm stray-packets boolean | |
| Tree | stray-packets | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rtp-header boolean
| Synopsis | Use RTP header for transmitted packets to the PSN | |
| Context | configure service cpipe string sap string cem rtp-header boolean | |
| Tree | rtp-header | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service cpipe string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service cpipe string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service cpipe string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service cpipe string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service cpipe string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service cpipe string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rate number
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service cpipe string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service cpipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service cpipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service cpipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service cpipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service cpipe string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service cpipe string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference | |
| Tree | queue | |
Reference | configure qos sap-egress string queue number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 20.10.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service cpipe string sap string egress qos sap-egress overrides queue reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service cpipe string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service cpipe string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service cpipe string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service cpipe string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
weight number
rate
cir (number | keyword)
| Synopsis | CIR at which the queue it to operate | |
| Context | configure service cpipe string sap string egress qos scheduler-policy overrides scheduler string rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pir (number | keyword)
| Synopsis | PIR at which the queue is to operate | |
| Context | configure service cpipe string sap string egress qos scheduler-policy overrides scheduler string rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service cpipe string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
endpoint reference
ingress
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service cpipe string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 20.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv4 criteria | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides ip-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 20.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv6 criteria | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides ipv6-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference | |
| Tree | queue | |
Reference | configure qos sap-ingress string queue number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service cpipe string sap string ingress qos sap-ingress overrides queue reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service cpipe string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service cpipe string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
weight number
rate
cir (number | keyword)
| Synopsis | CIR at which the queue it to operate | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy overrides scheduler string rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pir (number | keyword)
| Synopsis | PIR at which the queue is to operate | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy overrides scheduler string rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service cpipe string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lag
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service cpipe string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service cpipe string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
service-mtu number
| Synopsis | MTU size | |
| Context | configure service cpipe string service-mtu number | |
| Tree | service-mtu | |
| Range | 1 to 9194 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service cpipe string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bandwidth (number | keyword)
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service cpipe string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service cpipe string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
control-word boolean
| Synopsis | Use control word as part of packet encapsulation | |
| Context | configure service cpipe string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service cpipe string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
egress
qos
network
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service cpipe string spoke-sdp string egress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service cpipe string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service cpipe string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service cpipe string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
endpoint
icb boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Bind the SDP as the Inter-Chassis Backup (ICB) type | |
| Context | configure service cpipe string spoke-sdp string endpoint icb boolean | |
| Tree | icb | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
name reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Endpoint name to which SDP bind is attached | |
| Context | configure service cpipe string spoke-sdp string endpoint name reference | |
| Tree | name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
precedence (number | keyword)
| Synopsis | Precedence when multiple SDP binds are on one endpoint | |
| Context | configure service cpipe string spoke-sdp string endpoint precedence (number | keyword) | |
| Tree | precedence | |
| Range | 1 to 4 | |
| Options | ||
| Default | 4 | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ingress
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service cpipe string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service cpipe string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
instance number
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service cpipe string spoke-sdp string ingress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service cpipe string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
test boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate as a test service | |
| Context | configure service cpipe string test boolean | |
| Tree | test | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
vc-switching boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Use PW switching signaling for spoke SDPs in service | |
| Context | configure service cpipe string vc-switching boolean | |
| Tree | vc-switching | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
vc-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Circuit emulation service type | |
| Context | configure service cpipe string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
vpn-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VPN identifier for the service | |
| Context | configure service cpipe string vpn-id number | |
| Tree | vpn-id | |
| Range | 1 to 2147483647 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
customer [customer-name] string
[customer-name] string
contact string
customer-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Customer ID | |
| Context | configure service customer string customer-id number | |
| Tree | customer-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
description string
| Synopsis | Text description | |
| Context | configure service customer string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
multi-service-site [multi-service-site-name] string
| Synopsis | Enter the multi-service-site list instance | |
| Context | configure service customer string multi-service-site string | |
| Tree | multi-service-site | |
| Introduced | 16.0.R1 | |
Platforms | All |
[multi-service-site-name] string
| Synopsis | Customer site name | |
| Context | configure service customer string multi-service-site string | |
| Tree | multi-service-site | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
assignment
| Synopsis | Enter the assignment context | |
| Context | configure service customer string multi-service-site string assignment | |
| Tree | assignment | |
| Introduced | 16.0.R1 | |
Platforms | All |
card number
| Synopsis | Multi-service-site assignment to the card slot | |
| Context | configure service customer string multi-service-site string assignment card number | |
| Tree | card | |
| Range | 1 to 20 | |
Notes | The following elements are part of a choice: card, fpe, or port. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fpe reference
| Synopsis | Multi-service-site assignment to the FPE object | |
| Context | configure service customer string multi-service-site string assignment fpe reference | |
| Tree | fpe | |
Description | When configured to true, this command identifies the MSS assignment to an FPE object to allow the creation of a scheduling hierarchy used to control bandwidth over a set of PW SAPs belonging to multiple PW ports. These PW ports must be associated with the same FPE to which MSS is assigned. When configured to false, this command has no effect and returns no warnings or messages. | |
Reference | configure fwd-path-ext fpe number | |
Notes | The following elements are part of a choice: card, fpe, or port. | |
| Introduced | 20.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
port string
| Synopsis | Multi-service-site assignment to the port | |
| Context | configure service customer string multi-service-site string assignment port string | |
| Tree | port | |
Notes | The following elements are part of a choice: card, fpe, or port. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service customer string multi-service-site string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
| Synopsis | Enter the egress context | |
| Context | configure service customer string multi-service-site string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
agg-rate
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service customer string multi-service-site string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting for policers and queues | |
| Context | configure service customer string multi-service-site string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate number
policer-control-policy reference
| Synopsis | Policer control policy | |
| Context | configure service customer string multi-service-site string egress policer-control-policy reference | |
| Tree | policer-control-policy | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service customer string multi-service-site string egress scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides | |
| Tree | overrides | |
| Introduced | 16.0.R1 | |
Platforms | All |
scheduler [scheduler-name] string
| Synopsis | Enter the scheduler list instance | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
| Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context will not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context does not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
| Synopsis | Enter the parent context | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string parent | |
| Tree | parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
| Synopsis | Relative weight of the scheduler to feed the queue | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string rate | |
| Tree | rate | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | CIR for the scheduler | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
pir (number | keyword)
| Synopsis | PIR for the scheduler | |
| Context | configure service customer string multi-service-site string egress scheduler-policy overrides scheduler string rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service customer string multi-service-site string egress scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service customer string multi-service-site string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer-control-policy reference
| Synopsis | Policer control policy | |
| Context | configure service customer string multi-service-site string ingress policer-control-policy reference | |
| Tree | policer-control-policy | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides | |
| Tree | overrides | |
| Introduced | 16.0.R1 | |
Platforms | All |
scheduler [scheduler-name] string
| Synopsis | Enter the scheduler list instance | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
| Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
| Synopsis | Enter the parent context | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string parent | |
| Tree | parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
| Synopsis | Relative weight of the scheduler to feed the queue | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string rate | |
| Tree | rate | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | CIR for the scheduler | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
pir (number | keyword)
| Synopsis | PIR for the scheduler | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy overrides scheduler string rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service customer string multi-service-site string ingress scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
phone string
epipe [service-name] string
[service-name] string
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service epipe string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp [bgp-instance] number
[bgp-instance] number
adv-service-mtu number
| Synopsis | Advertised service MTU value | |
| Context | configure service epipe string bgp number adv-service-mtu number | |
| Tree | adv-service-mtu | |
Description | This command configures the MTU signaled value used in the BGP for the service. When configured, the router uses the value for signaling and for validation with the received MTU instead of the service MTU. However, the value does not affect the locally enforced value, which is still based on the service MTU. | |
| Range | 0 to 9782 | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
pw-template-binding [pw-template-name] reference
| Synopsis | Enter the pw-template-binding list instance | |
| Context | configure service epipe string bgp number pw-template-binding reference | |
| Tree | pw-template-binding | |
| Max. Instances | 100 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[pw-template-name] reference
| Synopsis | Policy name | |
| Context | configure service epipe string bgp number pw-template-binding reference | |
| Tree | pw-template-binding | |
Reference | configure service pw-template string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD | |
| Context | configure service epipe string bgp number pw-template-binding reference bfd-liveness boolean | |
| Tree | bfd-liveness | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-template reference
| Synopsis | BFD template name for PW-Template binding | |
| Context | configure service epipe string bgp number pw-template-binding reference bfd-template reference | |
| Tree | bfd-template | |
Reference | configure bfd bfd-template string | |
| Introduced | 16.0.R1 | |
Platforms | All |
endpoint reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Endpoint name associated with the BGP PW template | |
| Context | configure service epipe string bgp number pw-template-binding reference endpoint reference | |
| Tree | endpoint | |
Description | This command specifies the endpoint name associated with the BGP PW template. When an endpoint is associated to the PW template binding of a BGP VPWS service, EVPN MPLS can also be configured and associated to the same endpoint in the same Epipe service. | |
Reference | ||
| Introduced | 20.5.R1 | |
Platforms | All | |
import-rt string
route-distinguisher (keyword | vpn-route-distinguisher)
| Synopsis | RD component for NLRI for L2VPN and EVPN families | |
| Context | configure service epipe string bgp number route-distinguisher (keyword | vpn-route-distinguisher) | |
| Tree | route-distinguisher | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
route-target
| Synopsis | Enter the route-target context | |
| Context | configure service epipe string bgp number route-target | |
| Tree | route-target | |
| Introduced | 16.0.R1 | |
Platforms | All |
export string
import string
vsi-export reference
| Synopsis | VSI export policies | |
| Context | configure service epipe string bgp number vsi-export reference | |
| Tree | vsi-export | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
vsi-import reference
| Synopsis | VSI import policies | |
| Context | configure service epipe string bgp number vsi-import reference | |
| Tree | vsi-import | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
bgp-evpn
evi number
| Synopsis | EVPN ID | |
| Context | configure service epipe string bgp-evpn evi number | |
| Tree | evi | |
Description | This command configures an EVPN instance (EVI) unique in the system. It is used for the service-carving algorithm for multi-homing and auto-deriving route target and route distinguishers. The following options are supported: If this EVPN identifier is not specified, the value is zero and no route distinguisher or route target is automatically derived from it.If the specified EVPN identifier is lower than 65535 and no other route distinguisher or route target is configured in the service, the following applies:
If the specified EVPN identifier is higher than 65535 and no other route distinguisher or route target is configured in the service, the following applies.
| |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-attachment-circuit [name] string
| Synopsis | Enter the local-attachment-circuit list instance | |
| Context | configure service epipe string bgp-evpn local-attachment-circuit string | |
| Tree | local-attachment-circuit | |
| Max. Instances | 2 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
[name] string
| Synopsis | Attachment circuit name | |
| Context | configure service epipe string bgp-evpn local-attachment-circuit string | |
| Tree | local-attachment-circuit | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
endpoint reference
eth-tag number
| Synopsis | Ethernet tag of the attachment circuit | |
| Context | configure service epipe string bgp-evpn local-attachment-circuit string eth-tag number | |
| Tree | eth-tag | |
Description | This command configures the Ethernet tag value of the attachment circuit. When configured in the local attachment circuit context, the tag value is used in the advertised AD per-EVI route sent for the attachment circuit. When configured in the remote attachment circuit context, the value is compared with the Ethernet tag value of the imported D per-EVI routes for the service. When there is a match, the system creates an EVPN destination for the Epipe. | |
| Range | 1 to 16777215 | |
| Introduced | 20.10.R1 | |
Platforms | All |
mpls [bgp-instance] number
[bgp-instance] number
admin-state keyword
| Synopsis | Administrative state of BGP EVPN MPLS | |
| Context | configure service epipe string bgp-evpn mpls number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
auto-bind-tunnel
| Synopsis | Enter the auto-bind-tunnel context | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel | |
| Tree | auto-bind-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-flex-algo-fallback boolean
| Synopsis | Enable flexible algorithm fallback | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel allow-flex-algo-fallback boolean | |
| Tree | allow-flex-algo-fallback | |
Description | When configured to true, a BGP router with a Flex-Algorithm action configured (via the configure policy-options policy-statement entry action flex-algo command) can resolve to a tunnel with algorithm 0 if no target Flex-Algorithm tunnel is available. When configured to false, the BGP router can resolve only to the intended Flex-Algorithm tunnel, which may cause traffic loss if no corresponding Flex-Algorithm tunnel is available. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
ecmp number
enforce-strict-tunnel-tagging boolean
| Synopsis | Enable/disable enforcement of strict tunnel tagging | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel enforce-strict-tunnel-tagging boolean | |
| Tree | enforce-strict-tunnel-tagging | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
resolution keyword
| Synopsis | Resolution method for tunnel selection | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
resolution-filter
| Synopsis | Enter the resolution-filter context | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter | |
| Tree | resolution-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp boolean
| Synopsis | Use BGP tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter bgp boolean | |
| Tree | bgp | |
Description | When configured to true, BGP searches the BGP LSP for the address of the BGP next hop. When configured to false, BGP tunneling is not used and inter-area or inter-as prefixes are not resolved. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ldp boolean
| Synopsis | Use LDP tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter ldp boolean | |
| Tree | ldp | |
Description | When configured to true, BGP searches for an LDP LSP with a FEC prefix corresponding to the address of the BGP next hop. When configured to false, LDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mpls-fwd-policy boolean
| Synopsis | Use MPLS forwarding policy for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter mpls-fwd-policy boolean | |
| Tree | mpls-fwd-policy | |
Description | When configured to true, BGP uses the MPLS forwarding policy to determine the address of the BGP next hop. When configured to false, the MPLS forwarding policy is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
rib-api boolean
| Synopsis | Use RIB API gRPC service for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter rib-api boolean | |
| Tree | rib-api | |
Description | When configured to true, BGP uses tunnels programmed using the RIB API gRPC service to resolve the next hops of routes imported into the EVPN service. When configured to false, the RIB API service tunnels are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
rsvp boolean
| Synopsis | Use RSVP tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter rsvp boolean | |
| Tree | rsvp | |
Description | When configured to true, BGP searches the best metric RSVP LSP to determine the address of the BGP next hop. This address can correspond to the system interface or to another loopback interface used by the BGP instance on the remote node. The LSP metric is provided by MPLS in the tunnel table. In the case of multiple RSVP LSPs with the same lowest metric, BGP selects the LSP with the lowest tunnel ID. When configured to false, the RSVP LSP is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-isis boolean
| Synopsis | Use IS-IS SR tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-isis boolean | |
| Tree | sr-isis | |
Description | When configured to true, BGP uses an IS-IS tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered IS-IS instance. When configured to false, IS-IS tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-ospf boolean
| Synopsis | Use OSPF SR tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf boolean | |
| Tree | sr-ospf | |
Description | When configured to true, BGP uses an OSPF tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF instance. When configured to false, OSPF tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-ospf3 boolean
| Synopsis | Use OSPFv3 SR tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf3 boolean | |
| Tree | sr-ospf3 | |
Description | When configured to true, BGP uses an OSPF3 tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF3 instance. When configured to false, OSPF3 tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
sr-policy boolean
| Synopsis | Use SR policies for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-policy boolean | |
| Tree | sr-policy | |
Description | When configured to true, this command instructs BGP to use an SR policy to determine the address of the BGP next hop.The SR policy search criteria includes a non-null endpoint and color value that matches the BGP next hop and color extended community value, respectively, of the EVPN route. When configured to false, SR policies are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
sr-te boolean
| Synopsis | Use SR-TE tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-te boolean | |
| Tree | sr-te | |
Description | When configured to true, BGP uses an SR-TE tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered tunnel ID. When configured to false, SR-TE tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
udp boolean
| Synopsis | Use MPLS over UDP tunneling for next-hop resolution | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel resolution-filter udp boolean | |
| Tree | udp | |
Description | When configured to true, BGP uses an MPLS over UDP tunnel type to determine the address of the BGP next hop. When configured to false, MPLS over UDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weighted-ecmp boolean
| Synopsis | Allow weighted load balancing | |
| Context | configure service epipe string bgp-evpn mpls number auto-bind-tunnel weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
Description | When configured to true, this router enables weighted ECMP for packets using tunnels that a VPLS or Epipe automatically binds to. Packets are sprayed across LSPs in the ECMP according to the outcome of the hash algorithm and the configured load balancing weight of each LSP. When configured to false, this command disables weighted ECMP for next-hop tunnel selection. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
control-word boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable support for control word | |
| Context | configure service epipe string bgp-evpn mpls number control-word boolean | |
| Tree | control-word | |
Description | When configured to true, the router enables the transmission and reception of the control word for all EVPN-MPLS destinations at the same time. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service epipe string bgp-evpn mpls number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
dynamic-egress-label-limit boolean
| Synopsis | Enables dynamic egress label limit | |
| Context | configure service epipe string bgp-evpn mpls number dynamic-egress-label-limit boolean | |
| Tree | dynamic-egress-label-limit | |
Description | When configured to true, this command relaxes the egress MPLS label limit check when resolving BGP next hops in the tunnel table. For VPRN services, the OAM label is never computed and, therefore, one more egress label is allowed. For EVPN (Epipe and VPLS) services, the system only computes the control word and ESI label if they are used. For the control word, the system reduces the egress label limit by one label if the control word is configured in the service. When configured, the ESI label is not counted for Epipes or VPLS services without an ES. When configured to false this command, for EVPN, Epipe, and VPLS services, always accounts for the ESI label and control word. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
ecmp number
entropy-label boolean
| Synopsis | Enable use of entropy-labels | |
| Context | configure service epipe string bgp-evpn mpls number entropy-label boolean | |
| Tree | entropy-label | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service epipe string bgp-evpn mpls number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All | |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service epipe string bgp-evpn mpls number force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group identifier | |
| Context | configure service epipe string bgp-evpn mpls number oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 19.5.R1 | |
Platforms | All |
route-next-hop
| Synopsis | Enter the route-next-hop context | |
| Context | configure service epipe string bgp-evpn mpls number route-next-hop | |
| Tree | route-next-hop | |
Description | Commands in this context configure the next hop of the EVPN routes. | |
| Introduced | 19.10.R1 | |
Platforms | All |
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the next-hop for the service EVPN route | |
| Context | configure service epipe string bgp-evpn mpls number route-next-hop ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
system-ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv4 address for service EVPN route next hop | |
| Context | configure service epipe string bgp-evpn mpls number route-next-hop system-ipv4 | |
| Tree | system-ipv4 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
system-ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv6 address for service EVPN route next hop | |
| Context | configure service epipe string bgp-evpn mpls number route-next-hop system-ipv6 | |
| Tree | system-ipv6 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
send-tunnel-encap
| Synopsis | Enter the send-tunnel-encap context | |
| Context | configure service epipe string bgp-evpn mpls number send-tunnel-encap | |
| Tree | send-tunnel-encap | |
| Introduced | 16.0.R1 | |
Platforms | All |
mpls boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS encapsulation | |
| Context | configure service epipe string bgp-evpn mpls number send-tunnel-encap mpls boolean | |
| Tree | mpls | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
mpls-over-udp boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS over UDP encapsulation | |
| Context | configure service epipe string bgp-evpn mpls number send-tunnel-encap mpls-over-udp boolean | |
| Tree | mpls-over-udp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
remote-attachment-circuit [name] string
| Synopsis | Enter the remote-attachment-circuit list instance | |
| Context | configure service epipe string bgp-evpn remote-attachment-circuit string | |
| Tree | remote-attachment-circuit | |
| Max. Instances | 2 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
[name] string
| Synopsis | Attachment circuit name | |
| Context | configure service epipe string bgp-evpn remote-attachment-circuit string | |
| Tree | remote-attachment-circuit | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
endpoint reference
eth-tag number
| Synopsis | Ethernet tag of the attachment circuit | |
| Context | configure service epipe string bgp-evpn remote-attachment-circuit string eth-tag number | |
| Tree | eth-tag | |
Description | This command configures the Ethernet tag value of the attachment circuit. When configured in the local attachment circuit context, the tag value is used in the advertised AD per-EVI route sent for the attachment circuit. When configured in the remote attachment circuit context, the value is compared with the Ethernet tag value of the imported D per-EVI routes for the service. When there is a match, the system creates an EVPN destination for the Epipe. | |
| Range | 1 to 16777215 | |
| Introduced | 20.10.R1 | |
Platforms | All |
segment-routing-v6 [bgp-instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
Description | Commands in this context configure the SRv6 instance that is used in the service. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[bgp-instance] number
| Synopsis | BGP instance | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
admin-state keyword
| Synopsis | Administrative state of segment routing over IPv6 | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
ecmp number
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
force-vc-forwarding keyword
| Synopsis | Datapath forwarding to force vlan-vc-type | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
Description | This command allows the system to preserve the VLAN ID and 802.1p bits of the service-delimiting qtag in a new tag added in the customer frame before sending it to the EVPN destinations. This command may be used in conjunction with the sap ingress vlan-translation command. If so used, the configured translated VLAN ID is the VLAN ID sent to the EVPN destinations as opposed to the service-delimiting tag VLAN ID. If the ingress SAP/SDP binding is 'null'-encapsulated, the output VLAN ID and pbits is zero. | |
| Options | ||
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number oper-group reference | |
| Tree | oper-group | |
Description | This command adds the BGP EVPN SRv6 instance or an Ethernet Segment (ES) as a member of the operational group. When configured on a BGP EVPN instance, the operational group is up when it is either empty (meaning that the operational group has no members) or at least an EVPN destination is created under the EVPN instance added as member. When configured, no other SAP, SDP binding, or BGP EVPN instance can be added to the same operational group within the same or different service. The operational group is down when it is applied on a BGP EVPN instance as well as: the service is administratively disabled the BGP EVPN MPLS and VXLAN is administratively disabled all the EVPN destinations in the instance are removed When configured on an ES, the state of the operational group depends on the state of the SAPs contained in the ES. The operational group transitions to up if at least one SAP in the ES is up. The operational group goes down when all the associated SAPs are operationally down. Monitor the ES operational group on the LAG associated with the ES, along with single-active multihoming, so that the NDF state can be signaled to the CE by LAG standby signaling. | |
Reference | configure service oper-group string | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
resolution keyword
| Synopsis | Resolution options for routes | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | route-table | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
route-next-hop
| Synopsis | Enter the route-next-hop context | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number route-next-hop | |
| Tree | route-next-hop | |
Description | Commands in this context configure the next hop of the EVPN routes. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the next-hop for the service EVPN route | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number route-next-hop ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
system-ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv4 address for service EVPN route next hop | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number route-next-hop system-ipv4 | |
| Tree | system-ipv4 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
system-ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv6 address for service EVPN route next hop | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number route-next-hop system-ipv6 | |
| Tree | system-ipv6 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
source-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Source IPv6 address | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number source-address string | |
| Tree | source-address | |
Description | When configured, this command specifies the source IPv6 address used in the SA field of the outer IPv6 header of the SRv6 encapsulated packet. When not configured, the source IPv6 address is inherited from the configuration of the global default address in the router "base" segment-routing segment-routing-v6 source-address context. A source IPv6 address must be configured in this context or in the base router context. The system does not check if the address entered is a valid local address. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
srv6
default-locator string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route locator | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number srv6 default-locator string | |
| Tree | default-locator | |
Description | This command specifies the locator that exists in the SRv6 service instance and is used as the default locator for the service. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Segment Routing SRv6 instance | |
| Context | configure service epipe string bgp-evpn segment-routing-v6 number srv6 instance reference | |
| Tree | instance | |
Reference | configure service epipe string segment-routing-v6 number | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
vxlan [bgp-instance] number
[bgp-instance] number
admin-state keyword
| Synopsis | Administrative state of BGP EVPN VXLAN | |
| Context | configure service epipe string bgp-evpn vxlan number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service epipe string bgp-evpn vxlan number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ecmp number
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service epipe string bgp-evpn vxlan number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All | |
send-tunnel-encap boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send VXLAN value in encapsulation extended community | |
| Context | configure service epipe string bgp-evpn vxlan number send-tunnel-encap boolean | |
| Tree | send-tunnel-encap | |
Description | When configured to true, this command sends the VXLAN value in the encapsulation that is advertised with the EVPN routes for the service. The encapsulation is encoded in RFC5512-based tunnel encapsulation extended communities. When configured to false, no encapsulation extended community is sent. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
vxlan-instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VXLAN instance | |
| Context | configure service epipe string bgp-evpn vxlan number vxlan-instance reference | |
| Tree | vxlan-instance | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
bgp-mh-site [site-name] string
| Synopsis | Enter the bgp-mh-site list instance | |
| Context | configure service epipe string bgp-mh-site string | |
| Tree | bgp-mh-site | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[site-name] string
| Synopsis | Name for the specific site | |
| Context | configure service epipe string bgp-mh-site string | |
| Tree | bgp-mh-site | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
activation-timer number
| Synopsis | Time to wait for BGP updates from remote PEs | |
| Context | configure service epipe string bgp-mh-site string activation-timer number | |
| Tree | activation-timer | |
| Range | 0 to 100 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
admin-state keyword
| Synopsis | Administrative state of the site | |
| Context | configure service epipe string bgp-mh-site string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
boot-timer number
| Synopsis | Wait time after reboot to run the DF election algorithm | |
| Context | configure service epipe string bgp-mh-site string boot-timer number | |
| Tree | boot-timer | |
| Range | 0 to 600 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Site ID for the service | |
| Context | configure service epipe string bgp-mh-site string id number | |
| Tree | id | |
Description | This command configures the ID for the site. The ID must match between services but is local to the service. | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
min-down-timer number
| Synopsis | Minimum down time when site goes operationally down | |
| Context | configure service epipe string bgp-mh-site string min-down-timer number | |
| Tree | min-down-timer | |
| Range | 0 to 100 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Preference to advertise in NLRI L2 extended community | |
| Context | configure service epipe string bgp-mh-site string preference number | |
| Tree | preference | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SAP to be associated with this site | |
| Context | configure service epipe string bgp-mh-site string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
bgp-vpws
admin-state keyword
| Synopsis | Administrative state of the VPWS edge instance | |
| Context | configure service epipe string bgp-vpws admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-ve
id number
name string
remote-ve [name] string
[name] string
id number
customer reference
description string
| Synopsis | Text description | |
| Context | configure service epipe string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
endpoint [name] string
[name] string
description string
| Synopsis | Text description | |
| Context | configure service epipe string endpoint string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-time-active number
| Synopsis | Time before entering standby when MC-LAG SAP goes down | |
| Context | configure service epipe string endpoint string hold-time-active number | |
| Tree | hold-time-active | |
| Range | 1 to 60 | |
| Units | deciseconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
revert-time (number | keyword)
| Synopsis | Time to wait before reverting to primary spoke SDP | |
| Context | configure service epipe string endpoint string revert-time (number | keyword) | |
| Tree | revert-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Options | ||
| Default | immediate | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
standby-signaling keyword
| Synopsis | Endpoint behavior to handle the PW standby bit | |
| Context | configure service epipe string endpoint string standby-signaling keyword | |
| Tree | standby-signaling | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
eth-cfm
ignore-l2vpn-mtu-mismatch boolean
| Synopsis | Ignore the L2 VPN MTU mismatch with local service MTU | |
| Context | configure service epipe string ignore-l2vpn-mtu-mismatch boolean | |
| Tree | ignore-l2vpn-mtu-mismatch | |
Description | When configured to true, the router does not check the value of the Layer 2 MTU in the Layer2 Info Extended Community received in a BGP update message against the local service MTU or locally signaled MTU. It may, therefore, bring up the BGP VPWS service regardless of any MTU mismatch. When configured to false, an MTU mismatch prevents the system from bringing up a BGP-VPWS service. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
load-balancing
| Synopsis | Enter the load-balancing context | |
| Context | configure service epipe string load-balancing | |
| Tree | load-balancing | |
| Introduced | 16.0.R1 | |
Platforms | All |
lbl-eth-or-ip-l4-teid boolean
| Synopsis | Enable hashing of MPLS ethernet and IP packets on SAPs | |
| Context | configure service epipe string load-balancing lbl-eth-or-ip-l4-teid boolean | |
| Tree | lbl-eth-or-ip-l4-teid | |
Description | When configured to true, this command enables hashing of MPLS Ethernet and MPLS IP packets received on the Epipe and VPLS service SAP using the MPLS labels, the inner IP addresses, the port numbers, and the GTP TEID field, if read by the system. This capability is supported on line cards that are FP4-based and later. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
per-service-hashing boolean
| Synopsis | Enable per-service hashing for Ethernet services | |
| Context | configure service epipe string load-balancing per-service-hashing boolean | |
| Tree | per-service-hashing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
nat-outside [nat-group] number
| Synopsis | Enter the nat-outside list instance | |
| Context | configure service epipe string nat-outside number | |
| Tree | nat-outside | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[nat-group] number
| Synopsis | NAT group | |
| Context | configure service epipe string nat-outside number | |
| Tree | nat-outside | |
| Max. Range | 0 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Epipe as a NAT outside service | |
| Context | configure service epipe string nat-outside number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
oper-group reference
| Synopsis | Oper-group name | |
| Context | configure service epipe string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
pbb
force-qtag-forwarding boolean
| Synopsis | Add an IEEE 802.1q tag after CMAC addresses PBB header | |
| Context | configure service epipe string pbb force-qtag-forwarding boolean | |
| Tree | force-qtag-forwarding | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-switch-service-state keyword
| Synopsis | Endpoint state used to determine PBB-Epipe state | |
| Context | configure service epipe string pbb local-switch-service-state keyword | |
| Tree | local-switch-service-state | |
Description | In a PBB Epipe with two SAPs and a PBB tunnel, this command controls whether the operational state of the PBB-Epipe service depends on the state of the PBB tunnel only, or on the state of two of the three endpoints (PBB tunnel and two SAPs). The second case implies that at least one of the SAPs must be up for the PBB-Epipe service to be operationally up. | |
| Options | ||
| Default | sap | |
| Introduced | 21.7.R1 | |
Platforms | All |
tunnel
backbone-dest-mac string
| Synopsis | Backbone Destination MAC address | |
| Context | configure service epipe string pbb tunnel backbone-dest-mac string | |
| Tree | backbone-dest-mac | |
Notes | The following elements are part of a mandatory choice: backbone-dest-mac or backbone-dest-mac-name. | |
| Introduced | 16.0.R1 | |
Platforms | All |
backbone-dest-mac-name reference
| Synopsis | Backbone destination MAC name for PBB packets | |
| Context | configure service epipe string pbb tunnel backbone-dest-mac-name reference | |
| Tree | backbone-dest-mac-name | |
Reference | ||
Notes | The following elements are part of a mandatory choice: backbone-dest-mac or backbone-dest-mac-name. | |
| Introduced | 16.0.R1 | |
Platforms | All |
backbone-vpls-service-name reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Backbone VPLS service | |
| Context | configure service epipe string pbb tunnel backbone-vpls-service-name reference | |
| Tree | backbone-vpls-service-name | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
isid number
sap [sap-id] string
[sap-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service epipe string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service epipe string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service epipe string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth number
cflowd boolean
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service epipe string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service epipe string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service epipe string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service epipe string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service epipe string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service epipe string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service epipe string sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service epipe string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service epipe string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service epipe string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service epipe string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service epipe string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service epipe string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate number
filter
ip reference
ipv6 reference
mac reference
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service epipe string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service epipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service epipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service epipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service epipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service epipe string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service epipe string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service epipe string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
hs-secondary-shaper string
| Synopsis | HS Secondary Shaper | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-secondary-shaper string | |
| Tree | hs-secondary-shaper | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] reference
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] reference
| Synopsis | HS WRR group identifier | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
Reference | configure qos sap-egress string hs-wrr-group number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Class weight override of the WRR group | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-wrr-group reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Percent rate override applied to the HS WRR group | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-wrr-group reference percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Scheduling rate override applied to the HS WRR group | |
| Context | configure service epipe string sap string egress qos sap-egress overrides hs-wrr-group reference rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
|
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service epipe string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service epipe string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service epipe string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service epipe string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service epipe string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service epipe string sap string egress qos sap-egress port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the queue group redirect list policy | |
| Context | configure service epipe string sap string egress qos sap-egress port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance of port queue group | |
| Context | configure service epipe string sap string egress qos sap-egress port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service epipe string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service epipe string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service epipe string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service epipe string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
endpoint reference
eth-cfm
ais boolean
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service epipe string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service epipe string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service epipe string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service epipe string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais
| Synopsis | Enable the ais context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais | |
| Tree | ais | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
client-meg-level number
| Synopsis | Client MEG level for AIS message generation | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais client-meg-level number | |
| Tree | client-meg-level | |
| Range | 1 to 7 | |
| Max. Instances | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interface-support boolean
| Synopsis | Enable generation of AIS PDUs based on endpoint state | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interface-support boolean | |
| Tree | interface-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
| Synopsis | Transmission interval for AIS messages | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interval number | |
| Tree | interval | |
| Range | 1 | 60 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | all-def | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Priority of the AIS messages generated by the node | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
| Synopsis | Enable the csf context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
direction keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Direction the MEP faces | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number direction keyword | |
| Tree | direction | |
| Options | ||
| Default | down | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lbm-svc-act-responder boolean
| Synopsis | Process service activation streams in ETH-CFM LBM | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number lbm-svc-act-responder boolean | |
| Tree | lbm-svc-act-responder | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MEP provisioned using MA primary VLAN ID | |
| Context | configure service epipe string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number primary-vlan boolean | |
| Tree | primary-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
mip primary-vlan (number | keyword)
| Synopsis | Enter the mip list instance | |
| Context | configure service epipe string sap string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan (number | keyword)
| Synopsis | VLAN ID to which the MIP is attached | |
| Context | configure service epipe string sap string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command provides an option for linking a MIP with a Primary VLAN number or none. When the none option is provided, the MIP does not include the primary vlan. | |
| Range | 1 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service epipe string sap string eth-cfm mip primary-vlan (number | keyword) cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MIP | |
| Context | configure service epipe string sap string eth-cfm mip primary-vlan (number | keyword) mac-address string | |
| Tree | mac-address | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-ctag-levels number
| Synopsis | Squelch levels using additional VLAN C-Tag space | |
| Context | configure service epipe string sap string eth-cfm squelch-ingress-ctag-levels number | |
| Tree | squelch-ingress-ctag-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding plus an additional VLAN, up to a maximum tag length of two tags. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level to be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 21.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service epipe string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ethernet
llf
| Synopsis | Enter the llf context | |
| Context | configure service epipe string sap string ethernet llf | |
| Tree | llf | |
Description | Commands in this context enable Link Loss Forwarding (LLF) on an Ethernet port. This feature provides an end-to-end OAM fault notification for Ethernet VLL service. It brings down the Ethernet port (Ethernet LLF) or sends a SONET/SDH Path AIS (ATM LLF) toward the attached CE when there is a local fault on the pseudowire or service, or a remote fault on the SAP or pseudowire, signaled with label withdrawal or T-LDP status bits. It ceases when the fault disappears. The Ethernet port must be configured for null encapsulation. This feature is also supported in Epipes with BGP-EVPN enabled. In this case, upon removal of the EVPN destination, the port transitions to an operationally down state, however the AD per-EVI route for the SAP is still advertised (the SAP remains operationally up). The port transitions to the operationally up state when the EVPN destination is created. | |
| Introduced | 20.5.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Link Loss Forwarding | |
| Context | configure service epipe string sap string ethernet llf admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.5.R1 | |
Platforms | All |
ignore-oper-down boolean
| Synopsis | Ignore operational down state of the SAP on SAP failure | |
| Context | configure service epipe string sap string ignore-oper-down boolean | |
| Tree | ignore-oper-down | |
Description | When configured to true, the Epipe service does not transition to the operational down state when the SAP fails. This command can only be set to true for a single SAP in an Epipe. The command can be used in Epipes with or without EVPN enabled. When configured to false, the Epipe service transitions to the operational down state when SAP fails. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ingress
filter
ip reference
ipv6 reference
mac reference
qos
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service epipe string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service epipe string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service epipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service epipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service epipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service epipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service epipe string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service epipe string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service epipe string sap string ingress qos sap-ingress fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Queue group template name created on forwarding plane | |
| Context | configure service epipe string sap string ingress qos sap-ingress fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance | |
| Context | configure service epipe string sap string ingress qos sap-ingress fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overrides
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv4 criteria | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides ip-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv6 criteria | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides ipv6-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service epipe string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service epipe string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service epipe string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service epipe string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service epipe string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service epipe string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service epipe string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
qtag-manipulation
| Synopsis | Enter the qtag-manipulation context | |
| Context | configure service epipe string sap string ingress qtag-manipulation | |
| Tree | qtag-manipulation | |
| Introduced | 16.0.R1 | |
Platforms | All |
c-tag (number | keyword)
| Synopsis | Inner ingress VLAN translation for two service delimiting VLAN values | |
| Context | configure service epipe string sap string ingress qtag-manipulation c-tag (number | keyword) | |
| Tree | c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 16.0.R1 | |
Platforms | All |
push-dot1q-vlan (number | keyword)
| Synopsis | VLAN translation information | |
| Context | configure service epipe string sap string ingress qtag-manipulation push-dot1q-vlan (number | keyword) | |
| Tree | push-dot1q-vlan | |
| Range | 0 to 4094 | |
| Options | ||
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 16.0.R1 | |
Platforms | All |
s-tag number
| Synopsis | Outer ingress VLN translation for two service delimiting VLAN values | |
| Context | configure service epipe string sap string ingress qtag-manipulation s-tag number | |
| Tree | s-tag | |
| Range | 0 to 4094 | |
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 16.0.R1 | |
Platforms | All |
l2tpv3-session
| Synopsis | Enable the l2tpv3-session context | |
| Context | configure service epipe string sap string l2tpv3-session | |
| Tree | l2tpv3-session | |
| Introduced | 16.0.R4 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the session for the service | |
| Context | configure service epipe string sap string l2tpv3-session admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | All |
pseudo-wire
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the pseudo-wire context | |
| Context | configure service epipe string sap string l2tpv3-session pseudo-wire | |
| Tree | pseudo-wire | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ethernet
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the Ethernet PW-type for the L2TPv3 session | |
| Context | configure service epipe string sap string l2tpv3-session pseudo-wire ethernet | |
| Tree | ethernet | |
Notes | The following elements are part of a choice: ethernet or ethernet-vlan-id. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ethernet-vlan-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ethernet-VLAN PW-type ID for the L2TPv3 session | |
| Context | configure service epipe string sap string l2tpv3-session pseudo-wire ethernet-vlan-id number | |
| Tree | ethernet-vlan-id | |
| Range | 0 to 4095 | |
Notes | The following elements are part of a choice: ethernet or ethernet-vlan-id. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
router
group string
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router name used to identify the router instance | |
| Context | configure service epipe string sap string l2tpv3-session router router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R4 | |
Platforms | All | |
vc-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VC ID for the L2TPv3 session | |
| Context | configure service epipe string sap string l2tpv3-session vc-id number | |
| Tree | vc-id | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R4 | |
Platforms | All | |
lag
link-map-profile number
| Synopsis | LAG link map profile | |
| Context | configure service epipe string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service epipe string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | All |
class number
weight number
mc-ring
ring-node string
monitor-oper-group reference
| Synopsis | Monitor operational group | |
| Context | configure service epipe string sap string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service epipe string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service epipe string sap string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service epipe string sap string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service epipe string sap string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service epipe string sap string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
segment-routing-v6 [instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service epipe string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
Description | Commands in this context configure the SRv6 instance that is used in the service. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[instance] number
| Synopsis | Segment routing v6 instance | |
| Context | configure service epipe string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
locator [locator-name] reference
| Synopsis | Enter the locator list instance | |
| Context | configure service epipe string segment-routing-v6 number locator reference | |
| Tree | locator | |
| Max. Instances | 1 | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | SRv6 locator name | |
| Context | configure service epipe string segment-routing-v6 number locator reference | |
| Tree | locator | |
Reference | configure router string segment-routing segment-routing-v6 locator string | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
| Synopsis | Enter the function context | |
| Context | configure service epipe string segment-routing-v6 number locator reference function | |
| Tree | function | |
Description | Commands in this context configure SRv6 SID function values and parameters for the locator. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
end-dx2
value number
| Synopsis | SRv6 function value | |
| Context | configure service epipe string segment-routing-v6 number locator reference function end-dx2 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
micro-segment-locator [locator-name] reference
| Synopsis | Enter the micro-segment-locator list instance | |
| Context | configure service epipe string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
| Max. Instances | 1 | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | Micro-segment SRv6 locator name | |
| Context | configure service epipe string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
Description | This command associates a pre-defined micro-segment SRv6 locator (defined in the configure router segment-routing segment-routing-v6 context) with the SRv6 instance in the service. The same micro-segment locator can be referenced in multiple BGP instances used by IPVPN or EVPN. | |
Reference | configure router string segment-routing segment-routing-v6 micro-segment-locator string | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
| Synopsis | Enter the function context | |
| Context | configure service epipe string segment-routing-v6 number micro-segment-locator reference function | |
| Tree | function | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udx2
| Synopsis | Enable the udx2 context | |
| Context | configure service epipe string segment-routing-v6 number micro-segment-locator reference function udx2 | |
| Tree | udx2 | |
Description | Commands in this context configure the SRv6 micro-segment uDX2 behavior and the function value that is associated with the SRv6 instance in the service. When configured, decapsulation and cross-connect to the egress SAP occurs in the Epipe service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service epipe string segment-routing-v6 number micro-segment-locator reference function udx2 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service epipe string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-mtu number
| Synopsis | MTU size | |
| Context | configure service epipe string service-mtu number | |
| Tree | service-mtu | |
Description | This command configures the Maximum Transmission Unit (MTU) value (payload) for the service. The system uses the value to validate the operational state of the SAP and SDP binding within the service. The value overrides the default MTU for the service type. The service MTU and a SAP’s service delineation encapsulation overhead (4 bytes for a dot1q tag) are used to derive the required MTU of the physical port or channel on which the SAP was created. If the required payload is larger than the port or channel MTU, the SAP is placed in an inoperative state. If the required MTU is equal to or less than the port or channel MTU, the SAP transitions to the operative state. When binding an SDP to a service, the service MTU is compared to the path MTU associated with the SDP. The path MTU can be administratively defined in the context of the SDP. The default or administrative path MTU can be dynamically reduced due to the MTU capabilities discovered by the tunneling mechanism of the SDP or the egress interface MTU capabilities based on the next hop in the tunnel path. If the service MTU is larger than the path MTU, the SDP binding for the service is placed in an inoperative state. If the service MTU is equal to or less than the path MTU, the SDP binding is placed in an operational state. If a service MTU, port or channel MTU, or path MTU is dynamically or administratively modified, all associated SAP and SDP binding operational states are automatically reevaluated. Binding operational states are automatically reevaluated. For I-VPLS and Epipes bound to a B-VPLS, the service MTU must be at least 18 bytes smaller than the B-VPLS service MTU to accommodate the PBB header. Because this connects a Layer 2 to a Layer 3 service, adjust the service MTU under the Epipe service. The MTU that is advertised from the Epipe side is service MTU minus EtherHeaderSize. In the configure service epipe spoke-sdp context, the adv-service-mtu command can be used to override the configured MTU value used in T-LDP signaling to the far-end of an Epipe spoke-sdp. The adv-service-mtu command is also used to validate the value signaled by the far-end PE. | |
| Range | 1 to 9782 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Policy to collect accounting statistics | |
| Context | configure service epipe string spoke-sdp string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service epipe string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
adv-service-mtu number
| Synopsis | Service MTU used in signaling | |
| Context | configure service epipe string spoke-sdp string adv-service-mtu number | |
| Tree | adv-service-mtu | |
Description | This command configures the MTU value that is signaled in the targeted LDP for the spoke-SDP, instead of the service MTU. However, the configuration does not affect the locally enforced value, which is still based on the service MTU. This MTU value cannot be configured on a spoke-SDP that is bound to an SDP with the adv-mtu-override command (configure service sdp context). When unconfigured, an adjusted service MTU is used (service-mtu command). | |
| Range | 0 to 9782 | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
app-profile reference
| Synopsis | Application profile name for this SDP | |
| Context | configure service epipe string spoke-sdp string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth (number | keyword)
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service epipe string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service epipe string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
failure-action keyword
| Synopsis | VCCV BFD action taken on the SDP binding | |
| Context | configure service epipe string spoke-sdp string bfd failure-action keyword | |
| Tree | failure-action | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
| Options | ||
| Default | none | |
| Introduced | 21.2.R1 | |
Platforms | All |
wait-for-up-timer number
| Synopsis | Time waited for BFD up status | |
| Context | configure service epipe string spoke-sdp string bfd wait-for-up-timer number | |
| Tree | wait-for-up-timer | |
Description | This command configures the time interval that is used to wait for a BFD session to come up. This command is triggered when a spoke-SDP is first administratively enabled and a VCCV BFD session transitions from up to down. The command is required to allow time for BFD sessions to come up, and for BFD to settle before selecting the active spoke-SDP for use in a redundant set. In the case where a VCCV BFD session is bouncing, the timer prevents excessive flapping of the operational state of a spoke-SDP. | |
| Range | 1 to 60 | |
| Units | seconds | |
| Introduced | 21.2.R1 | |
Platforms |
All |
collect-stats boolean
| Synopsis | Allow agent to collect accounting statistics | |
| Context | configure service epipe string spoke-sdp string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service epipe string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service epipe string spoke-sdp string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service epipe string spoke-sdp string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service epipe string spoke-sdp string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service epipe string spoke-sdp string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service epipe string spoke-sdp string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service epipe string spoke-sdp string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service epipe string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
filter
ip reference
ipv6 reference
mac reference
l2tpv3
cookie string
qos
network
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service epipe string spoke-sdp string egress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service epipe string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service epipe string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service epipe string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
endpoint
icb boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Bind SDP as type Inter-Chassis Backup (ICB) | |
| Context | configure service epipe string spoke-sdp string endpoint icb boolean | |
| Tree | icb | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
name reference
precedence (number | keyword)
| Synopsis | Precedence when multiple SDP binds are on one endpoint | |
| Context | configure service epipe string spoke-sdp string endpoint precedence (number | keyword) | |
| Tree | precedence | |
| Range | 1 to 4 | |
| Options | ||
| Default | 4 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service epipe string spoke-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service epipe string spoke-sdp string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service epipe string spoke-sdp string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service epipe string spoke-sdp string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service epipe string spoke-sdp string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais
| Synopsis | Enable the ais context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais | |
| Tree | ais | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
client-meg-level number
| Synopsis | Client MEG level for AIS message generation | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais client-meg-level number | |
| Tree | client-meg-level | |
| Range | 1 to 7 | |
| Max. Instances | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interface-support boolean
| Synopsis | Enable generation of AIS PDUs based on endpoint state | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interface-support boolean | |
| Tree | interface-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
| Synopsis | Transmission interval for AIS messages | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interval number | |
| Tree | interval | |
| Range | 1 | 60 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | all-def | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Priority of the AIS messages generated by the node | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
| Synopsis | Enable the csf context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
direction keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Direction the MEP faces | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number direction keyword | |
| Tree | direction | |
| Options | ||
| Default | down | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lbm-svc-act-responder boolean
| Synopsis | Process service activation streams in ETH-CFM LBM | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number lbm-svc-act-responder boolean | |
| Tree | lbm-svc-act-responder | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MEP provisioned using MA primary VLAN ID | |
| Context | configure service epipe string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number primary-vlan boolean | |
| Tree | primary-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
mip primary-vlan (number | keyword)
primary-vlan (number | keyword)
| Synopsis | VLAN ID to which the MIP is attached | |
| Context | configure service epipe string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command provides an option for linking a MIP with a Primary VLAN number or none. When the none option is provided, the MIP does not include the primary vlan. | |
| Range | 1 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service epipe string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MIP | |
| Context | configure service epipe string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) mac-address string | |
| Tree | mac-address | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-ctag-levels number
| Synopsis | Squelch levels using additional VLAN C-Tag space | |
| Context | configure service epipe string spoke-sdp string eth-cfm squelch-ingress-ctag-levels number | |
| Tree | squelch-ingress-ctag-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding plus an additional VLAN, up to a maximum tag length of two tags. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level to be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 21.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service epipe string spoke-sdp string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service epipe string spoke-sdp string force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service epipe string spoke-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service epipe string spoke-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
filter
ip reference
ipv6 reference
mac reference
l2tpv3
cookie
cookie1 string
cookie2 string
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service epipe string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service epipe string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service epipe string spoke-sdp string ingress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service epipe string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
monitor-oper-group reference
| Synopsis | Operational group that affects state of the SDP bind | |
| Context | configure service epipe string spoke-sdp string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group identifier | |
| Context | configure service epipe string spoke-sdp string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
pw-status
block-on-peer-fault boolean
| Synopsis | Block transmit direction of PW based on status code | |
| Context | configure service epipe string spoke-sdp string pw-status block-on-peer-fault boolean | |
| Tree | block-on-peer-fault | |
| Default | false | |
Notes | The following elements are part of a choice: block-on-peer-fault or standby-signaling-slave. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signaling boolean
standby-signaling-slave boolean
| Synopsis | Block spoke transmission based on PW standby status | |
| Context | configure service epipe string spoke-sdp string pw-status standby-signaling-slave boolean | |
| Tree | standby-signaling-slave | |
| Default | false | |
Notes | The following elements are part of a choice: block-on-peer-fault or standby-signaling-slave. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source-bmac
| Synopsis | Enter the source-bmac context | |
| Context | configure service epipe string spoke-sdp string source-bmac | |
| Tree | source-bmac | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-sdp-bmac-lsb boolean
| Synopsis | Allow the spoke SDP to be part of a redundant pseudo-wire within PBB Epipe service | |
| Context | configure service epipe string spoke-sdp string source-bmac use-sdp-bmac-lsb boolean | |
| Tree | use-sdp-bmac-lsb | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service epipe string spoke-sdp string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service epipe string spoke-sdp string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service epipe string spoke-sdp string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vc-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Virtual circuit type associated with the SDP binding | |
| Context | configure service epipe string spoke-sdp string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All | |
vlan-vc-tag number
| Synopsis | SDP bind VC tag | |
| Context | configure service epipe string spoke-sdp string vlan-vc-tag number | |
| Tree | vlan-vc-tag | |
| Range | 0 to 4094 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
test boolean
vc-switching boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Use PW switching signaling for spoke SDPs in service | |
| Context | configure service epipe string vc-switching boolean | |
| Tree | vc-switching | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
vpn-id number
vxlan
instance [vxlan-instance] number
[vxlan-instance] number
egress-vtep
| Synopsis | Enter the egress-vtep context | |
| Context | configure service epipe string vxlan instance number egress-vtep | |
| Tree | egress-vtep | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | VTEP IP address used when originating VXLAN packets | |
| Context | configure service epipe string vxlan instance number egress-vtep ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group associated with egress VTEP address | |
| Context | configure service epipe string vxlan instance number egress-vtep oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
vni number
source-vtep (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Vxlan source virtual tunnel endpoint information | |
| Context | configure service epipe string vxlan source-vtep (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-vtep | |
| Introduced | 16.0.R1 | |
Platforms | All |
ies [service-name] string
[service-name] string
aa-interface [interface-name] string
| Synopsis | Enter the aa-interface list instance | |
| Context | configure service ies string aa-interface string | |
| Tree | aa-interface | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service ies string aa-interface string | |
| Tree | aa-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service ies string aa-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string aa-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service ies string aa-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string aa-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
primary
address string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string aa-interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
| Synopsis | Enter the sap list instance | |
| Context | configure service ies string aa-interface string sap string | |
| Tree | sap | |
| Max. Instances | 1 | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID | |
| Context | configure service ies string aa-interface string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service ies string aa-interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string aa-interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
qos
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service ies string aa-interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service ies string aa-interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service ies string aa-interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service ies string aa-interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ingress
qos
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service ies string aa-interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure service ies string aa-interface string sap string ingress qos sap-ingress overrides | |
| Tree | overrides | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service ies string aa-interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lag
aarp-interface [interface-name] string
| Synopsis | Enter the aarp-interface list instance | |
| Context | configure service ies string aarp-interface string | |
| Tree | aarp-interface | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service ies string aarp-interface string | |
| Tree | aarp-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service ies string aarp-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string aarp-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service ies string aarp-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
spoke-sdp [sdp-bind-id] string
| Synopsis | Enter the spoke-sdp list instance | |
| Context | configure service ies string aarp-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| Max. Instances | 1 | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sdp-bind-id] string
| Synopsis | SDP binding ID | |
| Context | configure service ies string aarp-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
aarp
id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | AARP instance ID | |
| Context | configure service ies string aarp-interface string spoke-sdp string aarp id reference | |
| Tree | id | |
Reference | configure application-assurance aarp number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Role of the spoke SDP referenced by the AARP | |
| Context | configure service ies string aarp-interface string spoke-sdp string aarp type keyword | |
| Tree | type | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of this service SDP binding | |
| Context | configure service ies string aarp-interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string aarp-interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VC egress value that indicates a specific connection | |
| Context | configure service ies string aarp-interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ingress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VC ingress value that indicates a specific connection | |
| Context | configure service ies string aarp-interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service ies string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
customer reference
description string
| Synopsis | Text description | |
| Context | configure service ies string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service ies string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IGMP host tracking | |
| Context | configure service ies string igmp-host-tracking admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service ies string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 260 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface [interface-name] string
| Synopsis | Enter the interface list instance | |
| Context | configure service ies string interface string | |
| Tree | interface | |
Description | Commands in this context create a logical IP routing interface. When created, attributes such as an IP address and SAP ID can be associated with the IP interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service ies string interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
cflowd-parameters
| Synopsis | Enter the cflowd-parameters context | |
| Context | configure service ies string interface string cflowd-parameters | |
| Tree | cflowd-parameters | |
| Introduced | 16.0.R1 | |
Platforms | All |
sampling [sampling-type] keyword
[sampling-type] keyword
| Synopsis | Traffic sampling type | |
| Context | configure service ies string interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
Description | This command configures the type of traffic to be sampled on the associated IP interface. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
direction keyword
| Synopsis | Direction of traffic for cflowd sampling | |
| Context | configure service ies string interface string cflowd-parameters sampling keyword direction keyword | |
| Tree | direction | |
Description | This command configures the direction in which sampling occurs on the associated IP interfaces. | |
| Options | ||
| Default | ingress-only | |
| Introduced | 16.0.R1 | |
Platforms | All |
sample-profile (keyword | number)
| Synopsis | Sample profile ID | |
| Context | configure service ies string interface string cflowd-parameters sampling keyword sample-profile (keyword | number) | |
| Tree | sample-profile | |
Description | This command defines the sampling rate profile associated with this interface. | |
| Max. Range | 0 to 4294967295 | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms | All |
type keyword
| Synopsis | Type of cflowd analysis | |
| Context | configure service ies string interface string cflowd-parameters sampling keyword type keyword | |
| Tree | type | |
Description | This command configures the cflowd sampling type on the associated IP interface. | |
| Options | ||
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpu-protection reference
| Synopsis | CPU protection policy | |
| Context | configure service ies string interface string cpu-protection reference | |
| Tree | cpu-protection | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dynamic-tunnel-redundant-nexthop string
| Synopsis | Redundant next-hop address for the dynamic IPsec tunnel | |
| Context | configure service ies string interface string dynamic-tunnel-redundant-nexthop string | |
| Tree | dynamic-tunnel-redundant-nexthop | |
Description | This command specifies the redundant next-hop address on a public or private IPsec interface (with public or private tunnel SAP) for a dynamic IPsec tunnel. The next-hop address is used by a standby node to shunt traffic to a master if it receives the address. The next-hop address is resolved in the routing table of a corresponding service. | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service ies string interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service ies string interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service ies string interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
ipv6
down
| Synopsis | Enter the down context | |
| Context | configure service ies string interface string hold-time ipv6 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service ies string interface string hold-time ipv6 down init-only boolean | |
| Tree | init-only | |
Description | When configured to true, the system applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service ies string interface string hold-time ipv6 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
if-attribute
| Synopsis | Enter the if-attribute context | |
| Context | configure service ies string interface string if-attribute | |
| Tree | if-attribute | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-group reference
| Synopsis | Administrative group name for the interface | |
| Context | configure service ies string interface string if-attribute admin-group reference | |
| Tree | admin-group | |
Reference | configure routing-options if-attribute admin-group string | |
| Max. Instances | 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
srlg-group [name] reference
| Synopsis | Add a list entry for srlg-group | |
| Context | configure service ies string interface string if-attribute srlg-group reference | |
| Tree | srlg-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] reference
| Synopsis | SRLG name | |
| Context | configure service ies string interface string if-attribute srlg-group reference | |
| Tree | srlg-group | |
Reference | configure routing-options if-attribute srlg-group string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
destination-class-lookup boolean
| Synopsis | Enable BGP destination class lookup | |
| Context | configure service ies string interface string ingress destination-class-lookup boolean | |
| Tree | destination-class-lookup | |
Description | When configured to true, the router performs a destination class lookup. This command is supported on FP3-based cards and later and is used in combination with the destination-class match criterion for an IP filter policy to filter egress traffic based on BGP destination classes. When configured to false, destination class lookup is not enabled. | |
| Default | false | |
| Introduced | 20.7.R1 | |
|
Platforms | All |
policy-accounting reference
| Synopsis | Ingress policy accounting template name | |
| Context | configure service ies string interface string ingress policy-accounting reference | |
| Tree | policy-accounting | |
Reference | configure routing-options policy-accounting policy-acct-template string | |
| Introduced | 19.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ingress-stats boolean
| Synopsis | Collect ingress statistics | |
| Context | configure service ies string interface string ingress-stats boolean | |
| Tree | ingress-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ip-mtu number
ipsec
admin-state keyword
| Synopsis | Administrative state of IPsec secured interface | |
| Context | configure service ies string interface string ipsec admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
ip-exception reference
| Synopsis | IP exception filter | |
| Context | configure service ies string interface string ipsec ip-exception reference | |
| Tree | ip-exception | |
Description | This command configures the IP exception filter for the secured interface. All ingress traffic matching the specified filter bypasses IPsec processing. | |
Reference | configure filter ip-exception string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
ipsec-tunnel [name] string
| Synopsis | Enter the ipsec-tunnel list instance | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
Description | Commands in this context configure IPsec tunnels used to secure traffic forwarded over the interface. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
[name] string
| Synopsis | IPsec tunnel name | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec tunnel | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
bfd
bfd-designate boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate IPsec tunnel to carry BFD traffic | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string bfd bfd-designate boolean | |
| Tree | bfd-designate | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
bfd-liveness
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string bfd bfd-liveness | |
| Tree | bfd-liveness | |
Description | Commands in this context configure a BFD session to provide a heart-beat mechanism for a specified IPsec tunnel. There can be only one BFD session assigned to any given IPsec tunnel, but there can be multiple IPsec tunnels using the same BFD session. BFD controls the state of the association tunnel. If the BFD session goes down, the system brings down the associated non-designated IPsec tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
dest-ip string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address used for the BFD session | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string bfd bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interface string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface used by the BFD session | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string bfd bfd-liveness interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
service-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string bfd bfd-liveness service-name string | |
| Tree | service-name | |
Description | This command configures the name of the service where BFD traffic is forwarded to. | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
clear-df-bit boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Reset the DF bit to 0 in all payload IP packets | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string clear-df-bit boolean | |
| Tree | clear-df-bit | |
Description | When configured to true, the DF bit is set to 0 in all payload IP packets associated with the IPsec tunnel, before any potential fragmentation occurs. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
copy-traffic-class-upon-decapsulation boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable traffic class copy upon decapsulation | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string copy-traffic-class-upon-decapsulation boolean | |
| Tree | copy-traffic-class-upon-decapsulation | |
Description | When configured to true, the system copies the traffic class from the outer tunnel IP packet header to the payload IP packet header in the decapsulating direction (public to private). | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
encapsulated-ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum size of the encapsulated tunnel packet | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string encapsulated-ip-mtu number | |
| Tree | encapsulated-ip-mtu | |
Description | This command specifies the maximum size of the encapsulated tunnel packet to the IPsec tunnel, the IP tunnel, or the dynamic tunnels terminated on the IPsec Gateway. If the encapsulated IPv4 or IPv6 tunnel packet exceeds this value, the system fragments the packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
icmp-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp-generation context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp-generation | |
| Tree | icmp-generation | |
Description | Commands in this context configure settings for ICMPv4 message generation. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
frag-required
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the frag-required context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp-generation frag-required | |
| Tree | frag-required | |
Description | Commands in this context configure the attributes for sending generated ICMP Destination Unreachable "fragmentation needed and DF set" messages (type 3, code 4) back to the source, if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of sending ICMP messages | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp-generation frag-required admin-state keyword | |
| Tree | admin-state | |
Description | This command configures the administrative state of sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) messages to the source if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Options | ||
| Default | enable | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending ICMP messages | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp-generation frag-required interval number | |
| Tree | interval | |
Description | This command configures the interval for sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4). | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMP messages that can be sent | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp-generation frag-required message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
icmp6-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp6-generation context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp6-generation | |
| Tree | icmp6-generation | |
Description | Commands in this context configure settings for ICMPv6 message generation. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
packet-too-big
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the packet-too-big context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big | |
| Tree | packet-too-big | |
Description | Commands in this context configure the parameters to send ICMPv6 PTB (Packet Too Big) messages on the private side. The system sends PTB messages if a received IPv6 packet on the private side is greater than 1280 bytes and it exceeds the private MTU of the tunnel. The private MTU for the tunnel is configured via the configure router interface ipsec ipsec-tunnel ip-mtu command for the interface. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of Packet Too Big message sends | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending Packet Too Big messages | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big interval number | |
| Tree | interval | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMPv6 PTB messages that can be sent | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of PTB messages that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Private MTU of the IPsec tunnel | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string ip-mtu number | |
| Tree | ip-mtu | |
Description | This command specifies the private MTU of the IPsec tunnel. The private MTU is used to determine the need for fragmentation before encapsulation of the payload packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
key-exchange
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the key-exchange context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange | |
| Tree | key-exchange | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
dynamic
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the dynamic context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic | |
| Tree | dynamic | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
auto-establish boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Attempt to establish a phase 1 exchange automatically | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic auto-establish boolean | |
| Tree | auto-establish | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
cert
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the cert context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert | |
| Tree | cert | |
Description | Commands in this context configure the attributes of the dynamic keying certificate. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
cert-profile reference
| Synopsis | Certificate profile name | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert cert-profile reference | |
| Tree | cert-profile | |
Reference | configure ipsec cert-profile string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
status-verify
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the status-verify context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify | |
| Tree | status-verify | |
Description | Commands in this context configure attributes of Certificate Status Verification (CSV). | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
default-result keyword
| Synopsis | Default result for Certificate Status Verification | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify default-result keyword | |
| Tree | default-result | |
Description | This command specifies the default certificate revocation status result to use when all configured CSV methods fail to return a result. | |
| Options | ||
| Default | revoked | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
primary keyword
| Synopsis | Primary method of CSV to verify the revocation status | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify primary keyword | |
| Tree | primary | |
Description | This command configures the primary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the certificate of the peer. | |
| Options | ||
| Default | crl | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
secondary keyword
| Synopsis | Secondary method used to verify certificate revocation | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify secondary keyword | |
| Tree | secondary | |
Description | This command specifies the secondary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the peer certificate. | |
| Options | ||
| Default | none | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR |
trust-anchor-profile reference
| Synopsis | Trust anchor profile name | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic cert trust-anchor-profile reference | |
| Tree | trust-anchor-profile | |
Reference | configure ipsec trust-anchor-profile string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
id
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the id context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic id | |
| Tree | id | |
Description | Commands in this context specify the local ID used for IDi or IDr for IKEv2 negotiation. The default behavior depends on the local authentication method as follows:
| |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
fqdn string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FQDN used as the local ID IKE type | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic id fqdn string | |
| Tree | fqdn | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv4 string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 as the local ID type | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic id ipv4 string | |
| Tree | ipv4 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 used as the local IKE ID type | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic id ipv6 (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ipv6 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ike-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IKE policy ID | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic ike-policy reference | |
| Tree | ike-policy | |
Description | This command specifies the ID of the IKE policy used for IKE negotiation. The ipsec-transport-mode-profile configuration only supports IKEv2. | |
Reference | configure ipsec ike-policy number | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipsec-transform reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec transform IDs used by the dynamic key | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic ipsec-transform reference | |
| Tree | ipsec-transform | |
Description | This command specifies IPsec transform IDs used for CHILD_SA negotiation. | |
Reference | configure ipsec ipsec-transform number | |
| Max. Instances | 4 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
pre-shared-key string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Pre-shared key for authentication | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange dynamic pre-shared-key string | |
| Tree | pre-shared-key | |
| String Length | 1 to 115 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
manual
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the manual context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual | |
| Tree | manual | |
Description | Commands in this context configure settings for manually configured security associations for the IPsec tunnel. | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
keys [security-association] number direction keyword
| Synopsis | Enter the keys list instance | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
Description | Commands in this context configure the security association list for the tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
[security-association] number
| Synopsis | SA entry ID | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
direction keyword
| Synopsis | Direction of the IPsec tunnel | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
authentication-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the authentication algorithm | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 130 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
encryption-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the encryption algorithm | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword encryption-key string | |
| Tree | encryption-key | |
| String Length | 1 to 66 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipsec-transform reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Transform entry used by manual SAs | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword ipsec-transform reference | |
| Tree | ipsec-transform | |
Reference | configure ipsec ipsec-transform number | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
spi number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | SPI of inbound and outbound packets | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword spi number | |
| Tree | spi | |
Description | This command specifies the Security Parameter Index (SPI) used to look up the instruction to verify and decrypt the incoming IPsec packets when the direction is inbound. When the direction is outbound, the SPI is used in the encoding of the outgoing packets. The remote node can use the SPI to look up the instruction to verify and decrypt the packet. | |
| Range | 256 to 16383 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local IPsec tunnel endpoint address | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-gateway-address-override | |
Description | This command configures the local IPsec tunnel endpoint address. This overrides the default endpoint address, which is the interface address. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
max-history-key-records
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the max-history-key-records context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string max-history-key-records | |
| Tree | max-history-key-records | |
Description | Commands in this context configure the settings for recording historical IPsec keys. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
esp number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of recent records | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string max-history-key-records esp number | |
| Tree | esp | |
| Range | 1 to 48 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
ike number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of historical IKE key records | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string max-history-key-records ike number | |
| Tree | ike | |
| Range | 1 to 3 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
pmtu-discovery-aging number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Aging out time of the learned path MTU | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string pmtu-discovery-aging number | |
| Tree | pmtu-discovery-aging | |
Description | This command configures the temporary public and private MTU expiration time. The temporary MTU is used for MTU propagation. | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-sap number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Private SAP ID | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string private-sap number | |
| Tree | private-sap | |
| Range | 0 to 4094 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-service string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Private service name | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string private-service string | |
| Tree | private-service | |
Description | This command configures the private service name. If unconfigured, the private service is the service where the secured interface resides. | |
| String Length | 1 to 64 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-tcp-mss-adjust number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) adjustment | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
Description | This command specifies the TCP MSS to adjust for the tunnel on the private side. When configured, the system may use the value to update the MSS option in the received TCP SYN packet on the private side. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
propagate-pmtu-v4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv4 hosts | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string propagate-pmtu-v4 boolean | |
| Tree | propagate-pmtu-v4 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv4 hosts). | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
propagate-pmtu-v6 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv6 hosts | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string propagate-pmtu-v6 boolean | |
| Tree | propagate-pmtu-v6 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv6 hosts). | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
public-tcp-mss-adjust (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) on the public network | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
Description | This command configures the MSS for the TCP traffic in an IPsec tunnel that is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Options | ||
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remote IPsec tunnel endpoint address | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | remote-gateway-address | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
replay-window number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Anti-replay window size | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string replay-window number | |
| Tree | replay-window | |
Description | This command specifies the size of an IPsec anti-replay window. If unconfigured, IPsec anti-replay is disabled. | |
| Range | 32 | 64 | 128 | 256 | 512 | |
| Units | packets | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
security-policy
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the security-policy context | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string security-policy | |
| Tree | security-policy | |
Description | Commands in this context specify a security policy used by the tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Security policy ID for use by the tunnel | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string security-policy id number | |
| Tree | id | |
| Max. Range | 0 to 4294967295 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
strict-match boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable strict match of the security policy entry | |
| Context | configure service ies string interface string ipsec ipsec-tunnel string security-policy strict-match boolean | |
| Tree | strict-match | |
Description | When configured to true, this command enables strict match of the security policy entry. When a CREATE_CHILD exchange request is received for a static IPsec tunnel, and this request is not a rekey request, ISA matches the received TSi and TSr with the configured security policy. This can be a match only when a received TS (in TSi or TSr) address range matches exactly with the subnet in a security policy entry. If there is no match, the setup fails, and TS_UNACCEPTABLE is sent. If there is a match, but there is an existing CHILD_SA for the matched security policy, the setup fails, and NO_PROPOSAL_CHOSEN is sent. If there is a match, and there is not a CHILD_SA for the matched entry, the subnet is sent in the matched security policy entry as TSi and TSr, and the CHILD_SA is created. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
ipv6-exception reference
| Synopsis | IPv6 filter exception used to bypass encryption | |
| Context | configure service ies string interface string ipsec ipv6-exception reference | |
| Tree | ipv6-exception | |
Description | This command specifies the IPv6 filter exception for an IPsec-secured IPv6 interface. When an IPv6 filter exception is added, clear text packets that match the exception criteria in the IPv6 filter exception can ingress the interface, even when IPsec is enabled on the interface. | |
Reference | configure filter ipv6-exception string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
public-sap number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Public SAP ID | |
| Context | configure service ies string interface string ipsec public-sap number | |
| Tree | public-sap | |
| Range | 0 to 4094 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
tunnel-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tunnel group ID | |
| Context | configure service ies string interface string ipsec tunnel-group reference | |
| Tree | tunnel-group | |
Reference | configure isa tunnel-group number | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv4
addresses
address [ipv4-address] string
[ipv4-address] string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string interface string ipv4 addresses address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-directed-broadcasts boolean
| Synopsis | Forward directed broadcasts | |
| Context | configure service ies string interface string ipv4 allow-directed-broadcasts boolean | |
| Tree | allow-directed-broadcasts | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service ies string interface string ipv4 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service ies string interface string ipv4 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service ies string interface string ipv4 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service ies string interface string ipv4 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service ies string interface string ipv4 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service ies string interface string ipv4 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dhcp
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service ies string interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service ies string interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service ies string interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases allowed | |
| Context | configure service ies string interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 0 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service ies string interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action keyword
circuit-id
| Synopsis | Enter the circuit-id context | |
| Context | configure service ies string interface string ipv4 dhcp option-82 circuit-id | |
| Tree | circuit-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-tuple
| Synopsis | Use the ASCII-encoded tuple for the circuit ID | |
| Context | configure service ies string interface string ipv4 dhcp option-82 circuit-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ifindex
none
sap-id
vlan-ascii-tuple
| Synopsis | Include the VLAN ID and dot1p bits in the ASCII tuple | |
| Context | configure service ies string interface string ipv4 dhcp option-82 circuit-id vlan-ascii-tuple | |
| Tree | vlan-ascii-tuple | |
Description | When configured, the router includes the VLAN ID and dot1p bits with the ASCII-tuple information. This only occurs on dot1q and QinQ-encapsulated ports. When the Option 82 bits are stripped, dot1p bits are copied to the Ethernet header of the outgoing packet. When unconfigured, the router leaves the circuit ID sub-option of the DHCP packet empty. | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-id
| Synopsis | Enter the remote-id context | |
| Context | configure service ies string interface string ipv4 dhcp option-82 remote-id | |
| Tree | remote-id | |
Description | Commands in this context configure the remote IP sub-option of the DHCP packet with the identity of the remote host end (typically the DHCP client). | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-string string
| Synopsis | User-defined ASCII string for the remote ID | |
| Context | configure service ies string interface string ipv4 dhcp option-82 remote-id ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac
none
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service ies string interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service ies string interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pool-name boolean
sap-id boolean
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service ies string interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
string string
system-id boolean
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
emulated-server string
| Synopsis | IP address used as the DHCP server address for the SAP | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
Description | This command configures the IP address which will be used as the DHCP server address in the context of the SAP. Typically, the configured address should be in the context of the subnet represented by the service. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
value number
| Synopsis | DHCP lease time | |
| Context | configure service ies string interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service ies string interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
relay-plain-bootp boolean
| Synopsis | Enable relaying of plain BOOTP packets | |
| Context | configure service ies string interface string ipv4 dhcp relay-plain-bootp boolean | |
| Tree | relay-plain-bootp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service ies string interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | All |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service ies string interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service ies string interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | All |
release-include-gi-address boolean
| Synopsis | Include gateway IP address in DHCP Release messages | |
| Context | configure service ies string interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | IP addresses for DHCP server requests | |
| Context | configure service ies string interface string ipv4 dhcp server string | |
| Tree | server | |
Description | This command configures a list of servers that this interface forwards requests to. The operator can enter the list of servers as either IP addresses or fully qualified domain names. The operator must specify at least one server specified for DHCP relay to work. If there are multiple servers, the system forwards the request to all the servers in the list. | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service ies string interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
trusted boolean
| Synopsis | Relay untrusted packets | |
| Context | configure service ies string interface string ipv4 dhcp trusted boolean | |
| Tree | trusted | |
Description | When configured to true, the router enables the trusted mode on the interface. When enabled, the relay agent changes the existing GI address (of the request) to the ingress interface, and forwards the request. A DHCP request that contains a GI address of 0.0.0.0 and an Option 82 field in the packet is discarded unless it arrives on a trusted circuit. This behavior only applies if the Relay Agent Information Option action is to keep the existing information. When the Option 82 field is replaced by the relay agent, the original Option 82 information is lost, and there is no reason to enable the trusted option. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
use-arp boolean
icmp
mask-reply boolean
| Synopsis | Allow responses to ICMP mask requests on the interface | |
| Context | configure service ies string interface string ipv4 icmp mask-reply boolean | |
| Tree | mask-reply | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service ies string interface string ipv4 icmp param-problem | |
| Tree | param-problem | |
Description | Commands in this context specify the settings for ICMP Parameter Problem messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sent Parameter Problem messages | |
| Context | configure service ies string interface string ipv4 icmp param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
redirects
| Synopsis | Enter the redirects context | |
| Context | configure service ies string interface string ipv4 icmp redirects | |
| Tree | redirects | |
Description | Commands in this context configure the settings for ICMP redirect messages generated by the interface. The system sends ICMP redirect messages to alert the sending node that a more optimal route is available on another router on the same subnetwork. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending ICMP redirect messages | |
| Context | configure service ies string interface string ipv4 icmp redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
ttl-expired
| Synopsis | Enter the ttl-expired context | |
| Context | configure service ies string interface string ipv4 icmp ttl-expired | |
| Tree | ttl-expired | |
Description | Commands in this context configure the settings for ICMP TTL expired messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending TTL expired messages | |
| Context | configure service ies string interface string ipv4 icmp ttl-expired admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service ies string interface string ipv4 icmp unreachables | |
| Tree | unreachables | |
Description | Commands in this context specify the settings for ICMP host and network destination unreachable messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending unreachable messages | |
| Context | configure service ies string interface string ipv4 icmp unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
ip-helper-address string
| Synopsis | Gateway address | |
| Context | configure service ies string interface string ipv4 ip-helper-address string | |
| Tree | ip-helper-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-dhcp-server reference
| Synopsis | DHCP server for the interface | |
| Context | configure service ies string interface string ipv4 local-dhcp-server reference | |
| Tree | local-dhcp-server | |
Reference | configure router string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service ies string interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
host-route
| Synopsis | Enter the host-route context | |
| Context | configure service ies string interface string ipv4 neighbor-discovery host-route | |
| Tree | host-route | |
| Introduced | 19.10.R1 | |
Platforms | All |
populate [route-type] keyword
| Synopsis | Enter the populate list instance | |
| Context | configure service ies string interface string ipv4 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Introduced | 19.10.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service ies string interface string ipv4 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service ies string interface string ipv4 neighbor-discovery host-route populate keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added in the route table for ARP or ND host routes. This tag can be matched on BGP VRF export and BGP peer export policies. | |
| Range | 1 to 255 | |
| Introduced | 19.10.R1 | |
|
Platforms | All | |
learn-unsolicited boolean
| Synopsis | Learn new entries from any received NA message | |
| Context | configure service ies string interface string ipv4 neighbor-discovery learn-unsolicited boolean | |
| Tree | learn-unsolicited | |
Description | When configured to true, the router can learn neighbor entries from received unsolicited Neighbor Advertisement (NA) messages, with or without the solicited (S) flag set. The command can be enabled for global addresses, link-local addresses, or for both. When configured to false, the router follows standard behavior for learning neighbor entries.
| |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit
log-only boolean
max-entries number
| Synopsis | Maximum number of entries learned on an IP interface | |
| Context | configure service ies string interface string ipv4 neighbor-discovery limit max-entries number | |
| Tree | max-entries | |
| Range | 0 to 524288 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
local-proxy-arp boolean
| Synopsis | Enable local proxy ARP on interface | |
| Context | configure service ies string interface string ipv4 neighbor-discovery local-proxy-arp boolean | |
| Tree | local-proxy-arp | |
Description | When configured to true, the router enables local proxy ARP on the interface. When configured to false, the router does not respond to ARP requests for addresses on the same subnet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
populate boolean
proactive-refresh boolean
| Synopsis | Send a single refresh message before entry timeout | |
| Context | configure service ies string interface string ipv4 neighbor-discovery proactive-refresh boolean | |
| Tree | proactive-refresh | |
Description | When configured to true, the router always sends a refresh message 30 seconds before the timeout of the entry (a single refresh message with no retries). When configured to false, the router marks an entry as stale 30 seconds before age-out, and the router only sends an ARP request to refresh the entry if the IOM receives traffic that uses it. Then, the IOM asks the ARP application to send a refresh message. With ARP proactive refresh enabled, the ARP module sends a refresh message regardless of the IOM receiving traffic. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
proxy-arp-policy reference
| Synopsis | Proxy ARP policy name | |
| Context | configure service ies string interface string ipv4 neighbor-discovery proxy-arp-policy reference | |
| Tree | proxy-arp-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-proxy-arp boolean
| Synopsis | Enable remote proxy ARP on the interface | |
| Context | configure service ies string interface string ipv4 neighbor-discovery remote-proxy-arp boolean | |
| Tree | remote-proxy-arp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
retry-timer number
| Synopsis | ARP retry interval | |
| Context | configure service ies string interface string ipv4 neighbor-discovery retry-timer number | |
| Tree | retry-timer | |
| Range | 1 to 300 | |
| Units | deciseconds | |
| Default | 50 | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor [ipv4-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service ies string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | IPv4 address that corresponds to the physical address | |
| Context | configure service ies string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service ies string interface string ipv4 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor-unnumbered
| Synopsis | Enable the static-neighbor-unnumbered context | |
| Context | configure service ies string interface string ipv4 neighbor-discovery static-neighbor-unnumbered | |
| Tree | static-neighbor-unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service ies string interface string ipv4 neighbor-discovery static-neighbor-unnumbered mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
| Synopsis | Timeout for an ARP entry learned on the interface | |
| Context | configure service ies string interface string ipv4 neighbor-discovery timeout number | |
| Tree | timeout | |
Description | This command configures the minimum time an ARP entry learned on the IP interface is stored in the ARP table. ARP entries are automatically refreshed when an ARP request or gratuitous ARP is seen by an IP host. Otherwise, the ARP entry is aged from the ARP table. | |
| Range | 0 to 65535 | |
| Units | seconds | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms | All |
primary
address string
broadcast keyword
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on the IP address | |
| Context | configure service ies string interface string ipv4 primary track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos-route-lookup keyword
| Synopsis | QoS Route lookup | |
| Context | configure service ies string interface string ipv4 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
secondary [address] string
[address] string
broadcast keyword
igp-inhibit boolean
| Synopsis | Disable the running IGP from recognizing secondary IP | |
| Context | configure service ies string interface string ipv4 secondary string igp-inhibit boolean | |
| Tree | igp-inhibit | |
Description | When configured to true, the running IGP does not recognize the secondary IP address as a local interface. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string interface string ipv4 secondary string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on the IP address | |
| Context | configure service ies string interface string ipv4 secondary string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
tcp-mss number
unnumbered
| Synopsis | Enter the unnumbered context | |
| Context | configure service ies string interface string ipv4 unnumbered | |
| Tree | unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address string
| Synopsis | IP address of the unnumbered interface | |
| Context | configure service ies string interface string ipv4 unnumbered ip-address string | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address, ip-int-name, or system. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-int-name string
| Synopsis | IP interface name | |
| Context | configure service ies string interface string ipv4 unnumbered ip-int-name string | |
| Tree | ip-int-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ip-address, ip-int-name, or system. | |
| Introduced | 16.0.R1 | |
Platforms | All |
system
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service ies string interface string ipv4 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-default boolean
| Synopsis | Ignore default route when performing a uRPF check | |
| Context | configure service ies string interface string ipv4 urpf-check ignore-default boolean | |
| Tree | ignore-default | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mode keyword
vrrp [virtual-router-id] number
[virtual-router-id] number
admin-state keyword
| Synopsis | Administrative state of VRRP | |
| Context | configure service ies string interface string ipv4 vrrp number admin-state keyword | |
| Tree | admin-state | |
Description | The command determines the administrative state of non-owner virtual router instances. Non-owner virtual router instances can be administratively disabled. This allows the termination of VRRP participation in the virtual router and stops all routing and other access capabilities with regards to the virtual router IP addresses. Disabling the virtual router instance provides a mechanism to maintain the virtual routers without causing false backup or master state changes. When disabled, no VRRP advertisement messages are generated and all received VRRP advertisement messages are silently discarded with no processing. Whenever the administrative or operational state of a virtual router instance transitions, a log message is generated. An owner virtual router context does not use this command. To administratively disable an owner virtual router instance, use the admin-state command within the parent IP interface node which administratively disables the IP interface. | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | Password for simple text authentication | |
| Context | configure service ies string interface string ipv4 vrrp number authentication-key string | |
| Tree | authentication-key | |
Description | This command optionally assigns a simple text password authentication key to generate master VRRP advertisement messages and validate received VRRP advertisement messages. If this command is re-executed with a different password key defined, the new key immediately replaces the old key. This command may be executed at any time. | |
| String Length | 1 to 38 | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup string
| Synopsis | Virtual router IP addresses for the interface | |
| Context | configure service ies string interface string ipv4 vrrp number backup string | |
| Tree | backup | |
Description | This command associates virtual router IP addresses with those of the parental IP interface. This command has two different functions based on whether it is being executed on an owner or non-owner virtual router instance. Non-owner virtual router instances create a routable IP interface address that is operationally dependent on the virtual router instance mode (master or backup). This command, when executed on an owner virtual router instance, does not create a routable IP interface address; it simply defines the existing IP addresses of the parental IP interface that are advertised by the virtual router instance. For owner virtual router instances, this command defines the IP addresses that are advertised within VRRP advertisement messages. This communicates the IP addresses that the master is advertising to backup virtual routers receiving the messages. The specified unicast-ipv4-address must be equal to one of the existing IP addresses in the parental IP interface (primary or secondary) or this command fails. See "Owner and non-owner VRRP" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Router Configuration Guide for more information about owner and non-owner virtual router instances. | |
| Max. Instances | 16 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ies string interface string ipv4 vrrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
dest-ip string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination IP address to use for BFD session | |
| Context | configure service ies string interface string ipv4 vrrp number bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service ies string interface string ipv4 vrrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service ies string interface string ipv4 vrrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
init-delay number
| Synopsis | VRRP initialization delay timer | |
| Context | configure service ies string interface string ipv4 vrrp number init-delay number | |
| Tree | init-delay | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac string
| Synopsis | Virtual MAC address to use in ARP responses | |
| Context | configure service ies string interface string ipv4 vrrp number mac string | |
| Tree | mac | |
Description | This command sets an explicit MAC address for the virtual router instance that overrides the VRRP default derived from the VRID. Changing the default MAC address is useful when an existing HSRP or other non-VRRP default MAC is in use by the IP hosts that use the virtual router IP address. Many hosts do not monitor unessential ARPs and continue to use the cached non-VRRP MAC address after the virtual router becomes master of the host’s gateway address. Additionally, this command sets the MAC address used in ARP responses when the virtual router instance is master. Routing of IP packets with unicast-mac-address as the destination MAC is also enabled. The MAC must be the same for all virtual routers participating as a virtual router or indeterminate connectivity by the attached IP hosts results. All VRRP advertisement messages are transmitted with unicast-mac-address as the source MAC. An operator can execute this command at any time and it takes effect immediately. When the virtual router MAC on a master virtual router instance changes, a gratuitous ARP is immediately sent with a VRRP advertisement message. If the virtual router instance is disabled or operating as a backup, the gratuitous ARP and VRRP advertisement messages are not sent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
master-int-inherit boolean
| Synopsis | Allow master instance to dictate the master down timer | |
| Context | configure service ies string interface string ipv4 vrrp number master-int-inherit boolean | |
| Tree | master-int-inherit | |
Description | When configured to true, the virtual router instance inherits the advertisement interval timer of the master VRRP router, which backup routers use to calculate the master down timer. When configured to false, the locally configured message interval must match the master's VRRP advertisement message advertisement interval field value or the message is discarded. | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-interval number
| Synopsis | Interval for sending VRRP advertisement messages | |
| Context | configure service ies string interface string ipv4 vrrp number message-interval number | |
| Tree | message-interval | |
Description | This command configures the administrative advertisement message timer used by the master virtual router instance to send VRRP advertisement messages. The backup master down timer is derived from the value configured using this command. The usage of this command varies for non-owner virtual router instances, depending on the state of the virtual router (master or backup) and the state of the master-int-inherit command:
| |
| Range | 1 to 2559 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-oper-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VRRP instance to follow a specified operational group | |
| Context | configure service ies string interface string ipv4 vrrp number monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | This command configures VRRP to associate with an operational group. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router, the operational group is up and the operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 22.2.R1 | |
Platforms | All | |
ntp-reply boolean
| Synopsis | Allow processing of NTP requests | |
| Context | configure service ies string interface string ipv4 vrrp number ntp-reply boolean | |
| Tree | ntp-reply | |
Description | When configured to true, the router redirects NTP requests to the VRRP virtual IP address. This behavior only applies to the router acting as the master VRRP router. When configured to false, the router does not process NTP requests. | |
| Default | false | |
| Introduced | 20.2.R1 | |
|
Platforms | All |
oper-group reference
| Synopsis | Operational group name associated with the VRRP | |
| Context | configure service ies string interface string ipv4 vrrp number oper-group reference | |
| Tree | oper-group | |
Description | This command configures an operational group to associate with the VRRP. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router (MR), the operational group is up. The operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
owner boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate the virtual router instance as owner | |
| Context | configure service ies string interface string ipv4 vrrp number owner boolean | |
| Tree | owner | |
Description | When configured to true, the router designates this virtual router instance as the owner of the virtual router IP addresses. Therefore, this virtual router becomes responsible for forwarding packets sent to the virtual router IP addresses. The owner also assumes the role of master virtual router. When configured to false, this virtual router instance is designated as a non-owner. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
passive boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Suppress the processing of VRRP advertisement messages | |
| Context | configure service ies string interface string ipv4 vrrp number passive boolean | |
| Tree | passive | |
Description | When configured to true, the router identifies this virtual router instance as passive; and therefore the owner of the virtual router IP addresses. A passive virtual router instance does not transmit or receive VRRP advertisement messages and is always in either the master state (if the interface is operationally up) or the init state (if the interface is operationally down). When configured to false, this virtual router instance is not identified as passive, meaning that it transmits and receives VRRP advertisement messages. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
ping-reply boolean
| Synopsis | Allow non-owner master to reply to ICMP echo requests | |
| Context | configure service ies string interface string ipv4 vrrp number ping-reply boolean | |
| Tree | ping-reply | |
Description | When configured to true, the router allows the non-owner master to reply to ICMP echo requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the ping request. Ping must not have been disabled at the management security level (either on the parental IP interface or on the Ping source host address). When configured to false, ICMP echo requests sent to non-owner master virtual IP addresses are silently discarded. Non-owner backup virtual routers never respond to ICMP echo requests, regardless of the configuration of this command. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | VRRP priority control policy | |
| Context | configure service ies string interface string ipv4 vrrp number policy reference | |
| Tree | policy | |
Description | This command configures a VRRP priority control policy to associate with the virtual router instance. VRRP priority control policies can override or adjust the base priority value of the virtual router instance, depending on events or conditions within the chassis. An operator can associate a policy with more than one virtual router instance. The priority events within the policy either override or diminish the base priority set with the priority command. As priority events clear in the policy, the in-use priority can eventually be restored to the base priority value. For non-owner virtual router instances, if this command is not executed, the base priority is used as the in-use priority. | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
preempt boolean
| Synopsis | Allow the VRRP to override an existing non-owner master | |
| Context | configure service ies string interface string ipv4 vrrp number preempt boolean | |
| Tree | preempt | |
Description | When configured to true, this virtual router instance overrides any non-owner master with an in-use message priority value less than the in-use priority value of this virtual router. When configured to false, this virtual router only becomes master if the master down timer expires before a VRRP advertisement message is received from another virtual router. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
priority number
| Synopsis | Base priority for the VRRP | |
| Context | configure service ies string interface string ipv4 vrrp number priority number | |
| Tree | priority | |
Description | This command configures the base router priority for the virtual router instance, which defines the selection order of the virtual router in the master election process. The in-use priority is derived from the base priority. However, the in-use priority is modified by optional VRRP priority control policies. An operator can use VRRP priority control policies to either override or adjust the base priority value depending on events or conditions within the chassis. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ssh-reply boolean
| Synopsis | Allow the non-owner master to reply to SSH requests | |
| Context | configure service ies string interface string ipv4 vrrp number ssh-reply boolean | |
| Tree | ssh-reply | |
Description | When configured to true, the router allows the non-owner master to reply to SSH requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the SSH request. SSH cannot be disabled at the management security level (either on the parental IP interface or on the SSH source host address). When configure to false, SSH requests to non-owner master virtual IP addresses are silently discarded. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
standby-forwarding boolean
| Synopsis | Allow standby router to forward traffic | |
| Context | configure service ies string interface string ipv4 vrrp number standby-forwarding boolean | |
| Tree | standby-forwarding | |
Description | When configured to true, the standby router forwards all traffic. When configured to false, the standby router cannot forward traffic sent to the MAC address of the virtual router. However, the standby router still forwards traffic sent to its own MAC address. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
telnet-reply boolean
| Synopsis | Allow non-owner master to reply to Telnet requests | |
| Context | configure service ies string interface string ipv4 vrrp number telnet-reply boolean | |
| Tree | telnet-reply | |
Description | When configured to true, the router allows the non-owner master to reply to Telnet requests directed at the IP addresses of the virtual router instance. Any routed interface can receive Telnet requests. Telnet cannot be disabled at the management security level (either on the parental IP interface or on the Telnet source host address). When configured to false, the router silently discards Telnet requests sent to non-owner master virtual IP addresses. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
traceroute-reply boolean
| Synopsis | Allow non-owner master to reply to traceroute requests | |
| Context | configure service ies string interface string ipv4 vrrp number traceroute-reply boolean | |
| Tree | traceroute-reply | |
Description | When configured to true, the router allows a non-owner master to reply to traceroute requests directed to the IP addresses of the virtual router instance. When configured to false, the router silently discards traceroute requests sent to non-owner master virtual IP addresses. Traceroute must not have been disabled at the management security level (either on the parental IP interface or the source host address). | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6
address [ipv6-address] string
[ipv6-address] string
duplicate-address-detection boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable Duplicate Address Detection | |
| Context | configure service ies string interface string ipv6 address string duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
Description | When configured to true, the router enables Duplicate Address Detection (DAD). When configured to false, the router disables DAD and sets the address to preferred, even if there is a duplicated address. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
eui-64 boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Form IPv6 address from prefix and 64-bit interface ID | |
| Context | configure service ies string interface string ipv6 address string eui-64 boolean | |
| Tree | eui-64 | |
Description | When configured to true, the router forms a complete IPv6 address from the supplied prefix and 64-bit interface identifier. The 64-bit interface identifier is derived from the MAC address on Ethernet interfaces. For interfaces without a MAC address, for example POS interfaces, use the base MAC address of the chassis. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
prefix-length number
| Synopsis | IPv6 address prefix length | |
| Context | configure service ies string interface string ipv6 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 4 to 128 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
primary-preference number
| Synopsis | Index assigned to the IPv6 address of the interface | |
| Context | configure service ies string interface string ipv6 address string primary-preference number | |
| Tree | primary-preference | |
Description | This command assigns a primary preference index to an IPv6 address of the interface to enforce the order in which the address is used by control plane protocols and applications that require a fixed address of the interface, such as LDP and Segment Routing. In cases where a fixed address is required when originating packets from the interface, the IPv6 address with the lowest primary preference index is selected. If the selected address is removed, the next IPv6 address with the next lowest primary preference index is selected. If this index is not specified for the IPv6 address, the system assigns the next available index value to the address. The address index space is unique across all addresses of a given interface. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP ID whose state is tracked on this IP address | |
| Context | configure service ies string interface string ipv6 address string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service ies string interface string ipv6 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service ies string interface string ipv6 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service ies string interface string ipv6 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service ies string interface string ipv6 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service ies string interface string ipv6 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service ies string interface string ipv6 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dhcp6
relay
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service ies string interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-nbr-of-leases number
| Synopsis | Maximum lease state entries allowed for the interface | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate max-nbr-of-leases number | |
| Tree | max-nbr-of-leases | |
| Range | 0 to 32767 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
route-populate
| Synopsis | Enter the route-populate context | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate route-populate | |
| Tree | route-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
na boolean
| Synopsis | Create route based on IA_NA prefix option in relay-reply message | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate route-populate na boolean | |
| Tree | na | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pd
| Synopsis | Enable the pd context | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate route-populate pd | |
| Tree | pd | |
| Introduced | 16.0.R1 | |
Platforms | All |
exclude boolean
ta boolean
| Synopsis | Create route based on IA_TA prefix option in relay-reply message | |
| Context | configure service ies string interface string ipv6 dhcp6 relay lease-populate route-populate ta boolean | |
| Tree | ta | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-address string
| Synopsis | Link address of the DHCPv6 relay messages | |
| Context | configure service ies string interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
neighbor-resolution boolean
| Synopsis | Enable neighbor resolution via DHCPv6 relay | |
| Context | configure service ies string interface string ipv6 dhcp6 relay neighbor-resolution boolean | |
| Tree | neighbor-resolution | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
option
interface-id
| Synopsis | Enter the interface-id context | |
| Context | configure service ies string interface string ipv6 dhcp6 relay option interface-id | |
| Tree | interface-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-tuple
| Synopsis | Use ASCII-encoded concatenated tuple | |
| Context | configure service ies string interface string ipv6 dhcp6 relay option interface-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | All |
if-index
sap-id
string string
| Synopsis | String for interface ID option in DHCPv6 relay packet | |
| Context | configure service ies string interface string ipv6 dhcp6 relay option interface-id string string | |
| Tree | string | |
| String Length | 1 to 80 | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-id boolean
python-policy reference
| Synopsis | Python policy name | |
| Context | configure service ies string interface string ipv6 dhcp6 relay python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
server string
source-address string
| Synopsis | Source IPv6 address of the DHCPv6 relay messages | |
| Context | configure service ies string interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
user-db reference
| Synopsis | Local user database for authentication | |
| Context | configure service ies string interface string ipv6 dhcp6 relay user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server
max-nbr-of-leases number
| Synopsis | DHCPv6 leases allowed | |
| Context | configure service ies string interface string ipv6 dhcp6 server max-nbr-of-leases number | |
| Tree | max-nbr-of-leases | |
| Range | 0 to 8000 | |
| Default | 8000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-delegation
| Synopsis | Enter the prefix-delegation context | |
| Context | configure service ies string interface string ipv6 dhcp6 server prefix-delegation | |
| Tree | prefix-delegation | |
Description | Commands in this context configure the options for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the link topology in the network to which the prefixes are assigned. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the prefix delegation | |
| Context | configure service ies string interface string ipv6 dhcp6 server prefix-delegation admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
prefix [ipv6-prefix] string
[ipv6-prefix] string
client-id
duid string
iaid number
| Synopsis | IAID from the requesting router to match | |
| Context | configure service ies string interface string ipv6 dhcp6 server prefix-delegation prefix string client-id iaid number | |
| Tree | iaid | |
Description | This command configures the Identity Association ID (IAID) associated with a prefix delegation entry and must match the IAID sent by the requesting router for the prefix delegation to succeed. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
preferred-lifetime (number | keyword)
| Synopsis | Preferred lifetime of the prefix | |
| Context | configure service ies string interface string ipv6 dhcp6 server prefix-delegation prefix string preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
Description | This command configures the preferred lifetime of the prefix. The value cannot be greater than the valid lifetime value. | |
| Range | 1 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 604800 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
valid-lifetime (number | keyword)
| Synopsis | Valid lifetime of the prefix | |
| Context | configure service ies string interface string ipv6 dhcp6 server prefix-delegation prefix string valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 1 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 2592000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
duplicate-address-detection boolean
| Synopsis | Enable Duplicate Address Detection per interface | |
| Context | configure service ies string interface string ipv6 duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
forward-ipv4-packets boolean
| Synopsis | Forward unencapsulated IPv4 packets | |
| Context | configure service ies string interface string ipv6 forward-ipv4-packets boolean | |
| Tree | forward-ipv4-packets | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
icmp6
packet-too-big
| Synopsis | Enter the packet-too-big context | |
| Context | configure service ies string interface string ipv6 icmp6 packet-too-big | |
| Tree | packet-too-big | |
Description | Commands in this context configure limiting the number of ICMPv6 Packet Too Big messages. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Packet Too Big message sends | |
| Context | configure service ies string interface string ipv6 icmp6 packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service ies string interface string ipv6 icmp6 param-problem | |
| Tree | param-problem | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Parameter Problem message sends | |
| Context | configure service ies string interface string ipv6 icmp6 param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
redirects
admin-state keyword
| Synopsis | Administrative state of Redirect message sends | |
| Context | configure service ies string interface string ipv6 icmp6 redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
time-exceeded
| Synopsis | Enter the time-exceeded context | |
| Context | configure service ies string interface string ipv6 icmp6 time-exceeded | |
| Tree | time-exceeded | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Time Exceeded message sends | |
| Context | configure service ies string interface string ipv6 icmp6 time-exceeded admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service ies string interface string ipv6 icmp6 unreachables | |
| Tree | unreachables | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Unreachable message sends | |
| Context | configure service ies string interface string ipv6 icmp6 unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
link-local-address
| Synopsis | Enter the link-local-address context | |
| Context | configure service ies string interface string ipv6 link-local-address | |
| Tree | link-local-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
duplicate-address-detection boolean
| Synopsis | Enable Duplicate Address Detection | |
| Context | configure service ies string interface string ipv6 link-local-address duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
Description | When configured to true, the router enables Duplicate Address Detection (DAD) on the interface. When configured to false, the router disables DAD and sets the address to preferred, even if there is a duplicated address. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-dhcp-server reference
| Synopsis | DHCP server for the interface | |
| Context | configure service ies string interface string ipv6 local-dhcp-server reference | |
| Tree | local-dhcp-server | |
Reference | configure router string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service ies string interface string ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
host-route
| Synopsis | Enter the host-route context | |
| Context | configure service ies string interface string ipv6 neighbor-discovery host-route | |
| Tree | host-route | |
| Introduced | 20.2.R1 | |
Platforms | All |
populate [route-type] keyword
| Synopsis | Enter the populate list instance | |
| Context | configure service ies string interface string ipv6 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Introduced | 20.2.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service ies string interface string ipv6 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 20.2.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service ies string interface string ipv6 neighbor-discovery host-route populate keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added in the route table for ARP or ND host routes. This tag can be matched on BGP VRF export and BGP peer export policies. | |
| Range | 1 to 255 | |
| Introduced | 20.2.R1 | |
|
Platforms | All | |
learn-unsolicited keyword
| Synopsis | Type of entries learned from unsolicited NA messages | |
| Context | configure service ies string interface string ipv6 neighbor-discovery learn-unsolicited keyword | |
| Tree | learn-unsolicited | |
Description | This command enables the ability to learn neighbor entries out of received unsolicited Neighbor Advertisement (NA) messages, with or without the solicited flag set. When unconfigured, the router follows standard RFC 4861 behavior for learning of neighbor entries. The neighbor is put in the stale state. This is the standard RFC behavior. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
limit
log-only boolean
| Synopsis | Generate log entries when limit is reached | |
| Context | configure service ies string interface string ipv6 neighbor-discovery limit log-only boolean | |
| Tree | log-only | |
Description | When configured to true, the router sends the warning message at the specified threshold percentage or upon exceeding the specified limit. Entries that exceed the limit are learned. When configured to false, the router does not send the warning message. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-entries number
| Synopsis | Maximum number of entries learned on an IP interface | |
| Context | configure service ies string interface string ipv6 neighbor-discovery limit max-entries number | |
| Tree | max-entries | |
Description | This command configures the maximum number of entries that can be learned on an IP interface. When unconfigured, no maximum limit is imposed. | |
| Range | 0 to 102400 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
local-proxy-nd boolean
| Synopsis | Enable local proxy neighbor discovery on the interface | |
| Context | configure service ies string interface string ipv6 neighbor-discovery local-proxy-nd boolean | |
| Tree | local-proxy-nd | |
Description | When configured to true, the router enables local proxy neighbor discovery on the interface and replies to neighbor solicitation requests when both the hosts are on the same subnet. In this case, ICMP redirects are disabled. When configured to false, the router disables local proxy neighbor discovery on the interface and does not reply to neighbor solicitation requests if both the hosts are on the same subnet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
proactive-refresh keyword
| Synopsis | Proactive refresh of neighbor entries | |
| Context | configure service ies string interface string ipv6 neighbor-discovery proactive-refresh keyword | |
| Tree | proactive-refresh | |
Description | This command enables a proactive refresh of the neighbor entries. After the stale timer expires, the router sends an NUD message to the host (regardless of the existence of traffic to the IP address on the IOM), so the entry can be refreshed or removed. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
proxy-nd-policy reference
| Synopsis | Proxy Neighbor Discovery policy name for the interface | |
| Context | configure service ies string interface string ipv6 neighbor-discovery proxy-nd-policy reference | |
| Tree | proxy-nd-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
reachable-time number
| Synopsis | Neighbor reachability detection timer | |
| Context | configure service ies string interface string ipv6 neighbor-discovery reachable-time number | |
| Tree | reachable-time | |
| Range | 30 to 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
secure-nd
admin-state keyword
| Synopsis | Administrative state of Secure Neighbor Discovery | |
| Context | configure service ies string interface string ipv6 neighbor-discovery secure-nd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-unsecured-msgs boolean
| Synopsis | Accept unsecured messages | |
| Context | configure service ies string interface string ipv6 neighbor-discovery secure-nd allow-unsecured-msgs boolean | |
| Tree | allow-unsecured-msgs | |
Description | When configured to true, the router accepts unsecured messages. When Secure Neighbor Discovery (SeND) is enabled, only secure messages are accepted. When configured to false, the router disables the acceptance of unsecured messages. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
public-key-min-bits number
| Synopsis | Minimum acceptable key length for public keys in CGA | |
| Context | configure service ies string interface string ipv6 neighbor-discovery secure-nd public-key-min-bits number | |
| Tree | public-key-min-bits | |
| Range | 512 to 1024 | |
| Default | 1024 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
security-parameter number
| Synopsis | Security parameter used in the generation of a CGA | |
| Context | configure service ies string interface string ipv6 neighbor-discovery secure-nd security-parameter number | |
| Tree | security-parameter | |
| Range | 0 to 1 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-time number
| Synopsis | Time a Neighbor Discovery cache entry remains stale | |
| Context | configure service ies string interface string ipv6 neighbor-discovery stale-time number | |
| Tree | stale-time | |
| Range | 60 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static-neighbor [ipv6-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service ies string interface string ipv6 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-address] string
| Synopsis | IPv6 address corresponding to the physical address | |
| Context | configure service ies string interface string ipv6 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service ies string interface string ipv6 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos-route-lookup keyword
| Synopsis | QoS Route lookup | |
| Context | configure service ies string interface string ipv6 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tcp-mss number
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service ies string interface string ipv6 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-default boolean
| Synopsis | Ignore default route when performing a uRPF check | |
| Context | configure service ies string interface string ipv6 urpf-check ignore-default boolean | |
| Tree | ignore-default | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mode keyword
vrrp [virtual-router-id] number
[virtual-router-id] number
admin-state keyword
| Synopsis | Administrative state of VRRP | |
| Context | configure service ies string interface string ipv6 vrrp number admin-state keyword | |
| Tree | admin-state | |
Description | The command determines the administrative state of non-owner virtual router instances. Non-owner virtual router instances can be administratively disabled. This allows the termination of VRRP participation in the virtual router and stops all routing and other access capabilities with regards to the virtual router IP addresses. Disabling the virtual router instance provides a mechanism to maintain the virtual routers without causing false backup or master state changes. When disabled, no VRRP advertisement messages are generated and all received VRRP advertisement messages are silently discarded with no processing. Whenever the administrative or operational state of a virtual router instance transitions, a log message is generated. An owner virtual router context does not use this command. To administratively disable an owner virtual router instance, use the admin-state command within the parent IP interface node which administratively disables the IP interface. | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup string
| Synopsis | Virtual router IP addresses for the interface | |
| Context | configure service ies string interface string ipv6 vrrp number backup string | |
| Tree | backup | |
Description | This command associates router IPv6 virtual router IP addresses with those of the parental IP interface. This command has two different functions based on whether it is being executed on an owner or non-owner virtual router instance. Non-owner virtual router instance create a routable IP interface address that is operationally dependent on the virtual router instance mode (master or backup). This command, when executed on an owner virtual router instance, does not create a routable IP interface address; it simply defines the existing IP addresses of the parental IP interface that are advertised by the virtual router instance. For owner virtual router instances, this command defines the IP addresses that are advertised within VRRP advertisement messages. This communicates the IP addresses that the master is representing to backup virtual routers receiving the messages. The specified IPv6 address must be equal to one of the existing parental IP addresses in the parental IP interface (primary or secondary) or this command fails. See "Owner and non-owner VRRP" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Router Configuration Guide for more information about owner and non-owner virtual router instances. | |
| Max. Instances | 4 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ies string interface string ipv6 vrrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address for the BFD session | |
| Context | configure service ies string interface string ipv6 vrrp number bfd-liveness dest-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service ies string interface string ipv6 vrrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service ies string interface string ipv6 vrrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
init-delay number
| Synopsis | VRRP initialization delay timer | |
| Context | configure service ies string interface string ipv6 vrrp number init-delay number | |
| Tree | init-delay | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac string
| Synopsis | Virtual MAC address to use in ARP responses | |
| Context | configure service ies string interface string ipv6 vrrp number mac string | |
| Tree | mac | |
Description | This command sets an explicit MAC address for the virtual router instance that overrides the VRRP default derived from the VRID. Changing the default MAC address is useful when an existing HSRP or other non-VRRP default MAC is in use by the IP hosts that use the virtual router IP address. Many hosts do not monitor unessential ARPs and continue to use the cached non-VRRP MAC address after the virtual router becomes master of the host’s gateway address. Additionally, this command sets the MAC address used in ARP responses when the virtual router instance is master. Routing of IP packets with unicast-mac-address as the destination MAC is also enabled. The MAC must be the same for all virtual routers participating as a virtual router or indeterminate connectivity by the attached IP hosts results. All VRRP advertisement messages are transmitted with unicast-mac-address as the source MAC. An operator can execute this command at any time and it takes effect immediately. When the virtual router MAC on a master virtual router instance changes, a gratuitous ARP is immediately sent with a VRRP advertisement message. If the virtual router instance is disabled or operating as a backup, the gratuitous ARP and VRRP advertisement messages are not sent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
master-int-inherit boolean
| Synopsis | Allow master instance to dictate the master down timer | |
| Context | configure service ies string interface string ipv6 vrrp number master-int-inherit boolean | |
| Tree | master-int-inherit | |
Description | When configured to true, the virtual router instance inherits the advertisement interval timer of the master VRRP router, which backup routers use to calculate the master down timer. When configured to false, the locally configured message interval must match the master's VRRP advertisement message advertisement interval field value or the message is discarded. | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-interval number
| Synopsis | Interval for sending VRRP advertisement messages | |
| Context | configure service ies string interface string ipv6 vrrp number message-interval number | |
| Tree | message-interval | |
Description | This command configures the administrative advertisement message timer used by the master virtual router instance to send VRRP advertisement messages. The backup master down timer is derived from the value configured using this command. The use of this command varies for non-owner virtual router instances, depending on the state of the virtual router (master or backup) and the state of the master-int-inherit command:
| |
| Range | 10 to 4095 | |
| Units | centiseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-oper-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VRRP instance to follow a specified operational group | |
| Context | configure service ies string interface string ipv6 vrrp number monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | This command configures VRRP to associate with an operational group. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router, the operational group is up and the operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 22.2.R1 | |
Platforms | All | |
ntp-reply boolean
| Synopsis | Allow processing of NTP requests | |
| Context | configure service ies string interface string ipv6 vrrp number ntp-reply boolean | |
| Tree | ntp-reply | |
Description | When configured to true, the router redirects NTP requests to the VRRP virtual IP address. This behavior only applies to the router acting as the master VRRP router. When configured to false, the router does not process NTP requests. | |
| Default | false | |
| Introduced | 20.2.R1 | |
|
Platforms | All |
oper-group reference
| Synopsis | Operational group name associated with the VRRP | |
| Context | configure service ies string interface string ipv6 vrrp number oper-group reference | |
| Tree | oper-group | |
Description | This command configures an operational group to associate with the VRRP. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router (MR), the operational group is up. The operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
owner boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate the virtual router instance as owner | |
| Context | configure service ies string interface string ipv6 vrrp number owner boolean | |
| Tree | owner | |
Description | When configured to true, the router designates this virtual router instance as the owner of the virtual router IP addresses. Therefore, this virtual router becomes responsible for forwarding packets sent to the virtual router IP addresses. The owner also assumes the role of master virtual router. When configured to false, this virtual router instance is designated as a non-owner. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
passive boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Suppress the processing of VRRP advertisement messages | |
| Context | configure service ies string interface string ipv6 vrrp number passive boolean | |
| Tree | passive | |
Description | When configured to true, the router identifies this virtual router instance as passive; and therefore the owner of the virtual router IP addresses. A passive virtual router instance does not transmit or receive VRRP advertisement messages and is always in either the master state (if the interface is operationally up) or the init state (if the interface is operationally down). When configured to false, this virtual router instance is not identified as passive, meaning that it transmits and receives VRRP advertisement messages. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
ping-reply boolean
| Synopsis | Allow non-owner master to reply to ICMP echo requests | |
| Context | configure service ies string interface string ipv6 vrrp number ping-reply boolean | |
| Tree | ping-reply | |
Description | When configured to true, the router allows the non-owner master to reply to ICMP echo requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the ping request. Ping must not have been disabled at the management security level (either on the parental IP interface or on the Ping source host address). When configured to false, ICMP echo requests sent to non-owner master virtual IP addresses are silently discarded. Non-owner backup virtual routers never respond to ICMP echo requests, regardless of the configuration of this command. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | VRRP priority control policy | |
| Context | configure service ies string interface string ipv6 vrrp number policy reference | |
| Tree | policy | |
Description | This command configures a VRRP priority control policy to associate with the virtual router instance. VRRP priority control policies can override or adjust the base priority value of the virtual router instance, depending on events or conditions within the chassis. An operator can associate a policy with more than one virtual router instance. The priority events within the policy either override or diminish the base priority set with the priority command. As priority events clear in the policy, the in-use priority can eventually be restored to the base priority value. For non-owner virtual router instances, if this command is not executed, the base priority is used as the in-use priority. | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
preempt boolean
| Synopsis | Allow the VRRP to override an existing non-owner master | |
| Context | configure service ies string interface string ipv6 vrrp number preempt boolean | |
| Tree | preempt | |
Description | When configured to true, this virtual router instance overrides any non-owner master with an in-use message priority value less than the in-use priority value of this virtual router. When configured to false, this virtual router only becomes master if the master down timer expires before a VRRP advertisement message is received from another virtual router. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
priority number
| Synopsis | Base priority for the VRRP | |
| Context | configure service ies string interface string ipv6 vrrp number priority number | |
| Tree | priority | |
Description | This command configures the base router priority for the virtual router instance, which defines the selection order of the virtual router in the master election process. The in-use priority is derived from the base priority. However, the in-use priority is modified by optional VRRP priority control policies. An operator can use VRRP priority control policies to either override or adjust the base priority value depending on events or conditions within the chassis. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
standby-forwarding boolean
| Synopsis | Allow standby router to forward traffic | |
| Context | configure service ies string interface string ipv6 vrrp number standby-forwarding boolean | |
| Tree | standby-forwarding | |
Description | When configured to true, the standby router forwards all traffic. When configured to false, the standby router cannot forward traffic sent to the MAC address of the virtual router. However, the standby router still forwards traffic sent to its own MAC address. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
telnet-reply boolean
| Synopsis | Allow non-owner master to reply to Telnet requests | |
| Context | configure service ies string interface string ipv6 vrrp number telnet-reply boolean | |
| Tree | telnet-reply | |
Description | When configured to true, the router allows the non-owner master to reply to Telnet requests directed at the IP addresses of the virtual router instance. Any routed interface can receive Telnet requests. Telnet cannot be disabled at the management security level (either on the parental IP interface or on the Telnet source host address). When configured to false, the router silently discards Telnet requests sent to non-owner master virtual IP addresses. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
traceroute-reply boolean
| Synopsis | Allow non-owner master to reply to traceroute requests | |
| Context | configure service ies string interface string ipv6 vrrp number traceroute-reply boolean | |
| Tree | traceroute-reply | |
Description | When configured to true, the router allows a non-owner master to reply to traceroute requests directed to the IP addresses of the virtual router instance. When configured to false, the router silently discards traceroute requests sent to non-owner master virtual IP addresses. Traceroute must not have been disabled at the management security level (either on the parental IP interface or the source host address). | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
load-balancing
| Synopsis | Enter the load-balancing context | |
| Context | configure service ies string interface string load-balancing | |
| Tree | load-balancing | |
| Introduced | 16.0.R1 | |
Platforms | All |
flow-label-load-balancing boolean
| Synopsis | Enable flow label load balancing | |
| Context | configure service ies string interface string load-balancing flow-label-load-balancing boolean | |
| Tree | flow-label-load-balancing | |
Description | When configured to true, the router enables load balancing in ECMP and LAG based on the output of a hash performed on the triplet (SA, DA, flow label) in the header of an IPv6 packet received on an IES, VPRN, R-VPLS, CSC, or network interface. When configured to false, the router disables load balancing in ECMP and LAG. | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
ip-load-balancing keyword
| Synopsis | IP load-balancing algorithm | |
| Context | configure service ies string interface string load-balancing ip-load-balancing keyword | |
| Tree | ip-load-balancing | |
Description | This command specifies whether to include the source address, destination address, or both in LAG or ECMP hash on IP interfaces. Additionally, when the l4-load-balancing command is enabled, this command also includes the source or destination port in the hash inputs. | |
| Options | ||
| Default | both | |
| Introduced | 16.0.R3 | |
Platforms | All |
spi-load-balancing boolean
| Synopsis | Enable SPI use in hashing | |
| Context | configure service ies string interface string load-balancing spi-load-balancing boolean | |
| Tree | spi-load-balancing | |
Description | When configured to true, the router uses the Security Parameter Index (SPI) in hashing for ESP and AH encrypted IPv4 and IPv6 traffic. This is a per-interface setting. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
teid-load-balancing boolean
| Synopsis | Enable use of TEID in hashing | |
| Context | configure service ies string interface string load-balancing teid-load-balancing boolean | |
| Tree | teid-load-balancing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
loopback boolean
mac string
mac-accounting boolean
| Synopsis | Enable MAC accounting functionality | |
| Context | configure service ies string interface string mac-accounting boolean | |
| Tree | mac-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
monitor-oper-group reference
| Synopsis | Operational group to monitor | |
| Context | configure service ies string interface string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
multi-chassis-shunting-profile reference
| Synopsis | Multi-chassis shunting profile name | |
| Context | configure service ies string interface string multi-chassis-shunting-profile reference | |
| Tree | multi-chassis-shunting-profile | |
Description | This command configures the name of a multi-chassis shunting profile to use on public or private tunnel interfaces. | |
Reference | configure router string ipsec multi-chassis-shunting-profile string | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
multicast-network-domain reference
| Synopsis | Network domain name | |
| Context | configure service ies string interface string multicast-network-domain reference | |
| Tree | multicast-network-domain | |
Reference | configure router string network-domains network-domain string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ping-template
| Synopsis | Enable the ping-template context | |
| Context | configure service ies string interface string ping-template | |
| Tree | ping-template | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the ping template | |
| Context | configure service ies string interface string ping-template admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
destination-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ping template destination address | |
| Context | configure service ies string interface string ping-template destination-address string | |
| Tree | destination-address | |
Description | This command configures the address to where the ICMP echo requests are directed to test connectivity. The source of the ICMP echo request is the primary IPv4 address of the interface under which the ping-template is configured. The destination address must be on the same subnet as the source IP address. Unnumbered interfaces and loopback addresses are not supported. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
name reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Ping template name | |
| Context | configure service ies string interface string ping-template name reference | |
| Tree | name | |
Description | This command configures the name of the ping template to be assigned to the IP interface. | |
Reference | configure test-oam icmp ping-template string | |
Notes | This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
ptp-hw-assist
| Synopsis | Enter the ptp-hw-assist context | |
| Context | configure service ies string interface string ptp-hw-assist | |
| Tree | ptp-hw-assist | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the PTP time stamping assist | |
| Context | configure service ies string interface string ptp-hw-assist admin-state keyword | |
| Tree | admin-state | |
Description | This command controls the administrative state of port-based time stamping assist of PTP packets at the physical interface.This capability is supported on specific hardware. The command may be blocked if not all hardware has the required level of support. Only one interface per physical port can have ptp-hw-assist enabled. This feature cannot be enabled if the physical port supporting the interface is configured as a PTP port. | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
radius-auth-policy reference
| Synopsis | Authentication policy | |
| Context | configure service ies string interface string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
[sap-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service ies string interface string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service ies string interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
anti-spoof keyword
| Synopsis | Anti-spoof filtering | |
| Context | configure service ies string interface string sap string anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service ies string interface string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth number
calling-station-id string
| Synopsis | Calling station ID | |
| Context | configure service ies string interface string sap string calling-station-id string | |
| Tree | calling-station-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service ies string interface string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service ies string interface string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service ies string interface string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service ies string interface string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service ies string interface string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service ies string interface string sap string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service ies string interface string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service ies string interface string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service ies string interface string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service ies string interface string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service ies string interface string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service ies string interface string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate number
filter
ip reference
ipv6 reference
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy overrides root max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ies string interface string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service ies string interface string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service ies string interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
hs-secondary-shaper string
| Synopsis | HS Secondary Shaper | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-secondary-shaper string | |
| Tree | hs-secondary-shaper | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] reference
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] reference
| Synopsis | HS WRR group identifier | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
Reference | configure qos sap-egress string hs-wrr-group number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Class weight override of the WRR group | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-wrr-group reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Percent rate override applied to the HS WRR group | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-wrr-group reference percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Scheduling rate override applied to the HS WRR group | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides hs-wrr-group reference rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
|
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ies string interface string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service ies string interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service ies string interface string sap string egress qos sap-egress port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the queue group redirect list policy | |
| Context | configure service ies string interface string sap string egress qos sap-egress port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance of port queue group | |
| Context | configure service ies string interface string sap string egress qos sap-egress port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ies string interface string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service ies string interface string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service ies string interface string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ies string interface string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-redirect-list reference
| Synopsis | Assign queue-group redirect list | |
| Context | configure service ies string interface string sap string egress queue-group-redirect-list reference | |
| Tree | queue-group-redirect-list | |
Reference | configure qos queue-group-redirect-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service ies string interface string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service ies string interface string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service ies string interface string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service ies string interface string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service ies string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service ies string interface string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service ies string interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service ies string interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-admin-state keyword
| Synopsis | Administrative state of host creation on the SAP | |
| Context | configure service ies string interface string sap string host-admin-state keyword | |
| Tree | host-admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service ies string interface string sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
filter
ip reference
ipv6 reference
qos
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service ies string interface string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy overrides root max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ies string interface string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Queue group template name created on forwarding plane | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overrides
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv4 criteria | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides ip-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv6 criteria | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides ipv6-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service ies string interface string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ies string interface string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service ies string interface string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service ies string interface string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ies string interface string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-redirect-list reference
| Synopsis | Queue group redirect list | |
| Context | configure service ies string interface string sap string ingress queue-group-redirect-list reference | |
| Tree | queue-group-redirect-list | |
Reference | configure qos queue-group-redirect-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-tunnel [tunnel-name] string
| Synopsis | Enter the ip-tunnel list instance | |
| Context | configure service ies string interface string sap string ip-tunnel string | |
| Tree | ip-tunnel | |
Description | Commands in this context configure an IP-GRE or IP-IP tunnel and associate it with a private tunnel SAP within an IES service. | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[tunnel-name] string
admin-state keyword
| Synopsis | Administrative state of the IP tunnel | |
| Context | configure service ies string interface string sap string ip-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Backup remote IP address that is applied to this tunnel | |
| Context | configure service ies string interface string sap string ip-tunnel string backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | backup-remote-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
clear-df-bit boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Clear the Do-not-Fragment bit | |
| Context | configure service ies string interface string sap string ip-tunnel string clear-df-bit boolean | |
| Tree | clear-df-bit | |
Description | When configured to true, the DF bit is cleared (set to 0) in all payload IP packets associated with the GRE or IPsec tunnel, before any potential fragmentation resulting from the ip-mtu command. This requires a modification of the header checksum. When configured to false, clearing of the DF bit is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
delivery-service string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Service to originate and terminate GRE packets | |
| Context | configure service ies string interface string sap string ip-tunnel string delivery-service string | |
| Tree | delivery-service | |
Description | This command specifies the service used to originate and terminate the GRE encapsulated packets belonging to the GRE tunnel. The delivery service may be the same service that owns the private tunnel SAP associated with the GRE tunnel. The GRE tunnel does not come up until a valid delivery service is configured. | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
description string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Text description | |
| Context | configure service ies string interface string sap string ip-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
dest-ip [dest-ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
[dest-ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the remote IP tunnel endpoint | |
| Context | configure service ies string interface string sap string ip-tunnel string dest-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | dest-ip | |
Description | This command configures the IP address of the remote IP tunnel endpoint. If the remote IP address is not within the subnet of the IP interface associated with the tunnel, the tunnel fails to come up. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dscp keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Differentiated Services Code Point (DSCP) name | |
| Context | configure service ies string interface string sap string ip-tunnel string dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
encapsulated-ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum size of the encapsulated tunnel packet | |
| Context | configure service ies string interface string sap string ip-tunnel string encapsulated-ip-mtu number | |
| Tree | encapsulated-ip-mtu | |
Description | This command specifies the maximum size of the encapsulated tunnel packet for the IP tunnel. If the packet exceeds this value, the system fragments the packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gre-header
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the gre-header context | |
| Context | configure service ies string interface string sap string ip-tunnel string gre-header | |
| Tree | gre-header | |
| Introduced | 16.0.R1 | |
Platforms | All | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the GRE header in the tunnel | |
| Context | configure service ies string interface string sap string ip-tunnel string gre-header admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All | |
key
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the keys in the GRE header | |
| Context | configure service ies string interface string sap string ip-tunnel string gre-header key admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All | |
receive number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Receive key of the GRE header | |
| Context | configure service ies string interface string sap string ip-tunnel string gre-header key receive number | |
| Tree | receive | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
send number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send key of the GRE header | |
| Context | configure service ies string interface string sap string ip-tunnel string gre-header key send number | |
| Tree | send | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
icmp-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp-generation context | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp-generation | |
| Tree | icmp-generation | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
frag-required
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the frag-required context | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp-generation frag-required | |
| Tree | frag-required | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send fragmentation required messages | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp-generation frag-required admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 21.5.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum interval that the ICMP messages can be sent | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp-generation frag-required interval number | |
| Tree | interval | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMP messages sent | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp-generation frag-required message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of ICMP messages that can be sent during the period specified by the interval command. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 21.5.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
icmp6-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp6-generation context | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp6-generation | |
| Tree | icmp6-generation | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
packet-too-big
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the packet-too-big context | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp6-generation packet-too-big | |
| Tree | packet-too-big | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of sending Packet Too Big messages | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp6-generation packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
number number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of PTB ICMPv6 messages that can be sent | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp6-generation packet-too-big number number | |
| Tree | number | |
Description | This command configures the maximum number of ICMPv6 messages that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
seconds number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum interval when PTB messages can be sent | |
| Context | configure service ies string interface string sap string ip-tunnel string icmp6-generation packet-too-big seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP MTU for the interface | |
| Context | configure service ies string interface string sap string ip-tunnel string ip-mtu number | |
| Tree | ip-mtu | |
Description | This command specifies the IP MTU for the interface. If the DF bit is not set in the packet, IP packet fragmentation is performed, if necessary, based on this configured value. When unconfigured, all IP packets, regardless of the packet size or DF bit setting, are allowed into the tunnel without fragmentation. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipsec-transport-mode-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec transport mode profile name | |
| Context | configure service ies string interface string sap string ip-tunnel string ipsec-transport-mode-profile reference | |
| Tree | ipsec-transport-mode-profile | |
Reference | configure ipsec ipsec-transport-mode-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local IP address of this tunnel | |
| Context | configure service ies string interface string sap string ip-tunnel string local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-ip-address | |
Description | This command specifies the local IP address to use for the IP tunnel. This configuration applies to the outer IP header of the encapsulated packets. The address must belong to one of the IP subnets associated with the public SAP interface of the tunnel group. The source IP address, the remote IP address, and the backup remote IP address of a tunnel must all belong to the same address family (IPv4 or IPv6). When this command specifies an IPv6 address, it must be a global unicast address. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
pmtu-discovery-aging number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time to age out the learned path MTU | |
| Context | configure service ies string interface string sap string ip-tunnel string pmtu-discovery-aging number | |
| Tree | pmtu-discovery-aging | |
Description | This command configures the temporary public MTU expiration time. The temporary public MTU is used for MTU propagation. | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
private-tcp-mss-adjust number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP Maximum Segment Size (MSS) on the private side | |
| Context | configure service ies string interface string sap string ip-tunnel string private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
Description | This command specifies the TCP MSS to adjust for tunnels on the private side. The value is used to adjust the TCP MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv4 hosts | |
| Context | configure service ies string interface string sap string ip-tunnel string propagate-pmtu-v4 boolean | |
| Tree | propagate-pmtu-v4 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v6 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of path MTU to IPv6 hosts | |
| Context | configure service ies string interface string sap string ip-tunnel string propagate-pmtu-v6 boolean | |
| Tree | propagate-pmtu-v6 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
public-tcp-mss-adjust (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP Maximum Segment Size (MSS) on the public side | |
| Context | configure service ies string interface string sap string ip-tunnel string public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
Description | This command specifies the TCP MSS for TCP traffic sent from the public network to the private network. The value is used to adjust the TCP MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
reassembly (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum reassembly wait time | |
| Context | configure service ies string interface string sap string ip-tunnel string reassembly (number | keyword) | |
| Tree | reassembly | |
Description | This command configures the maximum time to wait to receive all fragments of a particular IPsec or GRE packet for reassembly. | |
| Range | 1 to 5000 | |
| Units | milliseconds | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remote IP address of the tunnel | |
| Context | configure service ies string interface string sap string ip-tunnel string remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | remote-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
ipsec-gateway [name] string
| Synopsis | Enter the ipsec-gateway list instance | |
| Context | configure service ies string interface string sap string ipsec-gateway string | |
| Tree | ipsec-gateway | |
| Max. Instances | 1 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | IPsec gateway name | |
| Context | configure service ies string interface string sap string ipsec-gateway string | |
| Tree | ipsec-gateway | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec gateway | |
| Context | configure service ies string interface string sap string ipsec-gateway string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
cert
cert-profile reference
| Synopsis | Certificate profile name | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert cert-profile reference | |
| Tree | cert-profile | |
Reference | configure ipsec cert-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
status-verify
| Synopsis | Enter the status-verify context | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert status-verify | |
| Tree | status-verify | |
Description | Commands in this context configure certificate revocation status verification. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-result keyword
| Synopsis | Default result of Certificate Status Verification (CSV) | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert status-verify default-result keyword | |
| Tree | default-result | |
Description | This command specifies the default result when both the primary and secondary methods fail to provide an answer. | |
| Options | ||
| Default | revoked | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
primary keyword
| Synopsis | Primary method of CSV to verify the revocation status | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert status-verify primary keyword | |
| Tree | primary | |
| Options | ||
| Default | crl | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
secondary keyword
| Synopsis | Secondary method of CSV to verify the revocation status | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert status-verify secondary keyword | |
| Tree | secondary | |
| Options | ||
| Default | none | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
trust-anchor-profile reference
| Synopsis | Trust anchor profile name | |
| Context | configure service ies string interface string sap string ipsec-gateway string cert trust-anchor-profile reference | |
| Tree | trust-anchor-profile | |
Reference | configure ipsec trust-anchor-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
client-db
| Synopsis | Enable the client-db context | |
| Context | configure service ies string interface string sap string ipsec-gateway string client-db | |
| Tree | client-db | |
Description | Commands in this context configure the IPsec client database. The client database is used to authenticate the IKEv2 dynamic LAN-to-LAN tunnel. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fallback boolean
| Synopsis | Fall back to the default authentication policy | |
| Context | configure service ies string interface string sap string ipsec-gateway string client-db fallback boolean | |
| Tree | fallback | |
Description | When configured to true, this command specifies whether the IPsec gateway can fall back to the default authentication policy when the IPsec tunnel authentication request fails to match any clients in the IPsec database. When configured to false and the client database lookup fails to return a matched result, the system fails the tunnel setup. | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name reference
default-secure-service
| Synopsis | Enable the default-secure-service context | |
| Context | configure service ies string interface string sap string ipsec-gateway string default-secure-service | |
| Tree | default-secure-service | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Private IPsec tunnel interface name | |
| Context | configure service ies string interface string sap string ipsec-gateway string default-secure-service interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
service-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default security service name | |
| Context | configure service ies string interface string sap string ipsec-gateway string default-secure-service service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
default-tunnel-template reference
| Synopsis | Default tunnel policy template for the gateway | |
| Context | configure service ies string interface string sap string ipsec-gateway string default-tunnel-template reference | |
| Tree | default-tunnel-template | |
Reference | configure ipsec tunnel-template number | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp-address-assignment
| Synopsis | Enter the dhcp-address-assignment context | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment | |
| Tree | dhcp-address-assignment | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcpv4
| Synopsis | Enable the dhcpv4 context | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 | |
| Tree | dhcpv4 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec DHCPv4 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Gateway IP address of DHCPv4 packets sent by the system | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 gi-address string | |
| Tree | gi-address | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
send-release boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send DHCPv4 release message when IPsec tunnel removed | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 send-release boolean | |
| Tree | send-release | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the server context | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server | |
| Tree | server | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DHCPv4 server addresses | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server address string | |
| Tree | address | |
Description | This command specifies DHCPv4 server addresses for the DHCPv4-based address assignment. If multiple server addresses are specified, the first advertised DHCPv4 address received is chosen. | |
| Max. Instances | 8 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance used to reach the DHCPv4 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcpv6
| Synopsis | Enable the dhcpv6 context | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 | |
| Tree | dhcpv6 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Link address of the relayed DHCPv6 packets | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 link-address string | |
| Tree | link-address | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
send-release boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send DHCPv6 release message when IPsec tunnel removed | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 send-release boolean | |
| Tree | send-release | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the server context | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server | |
| Tree | server | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DHCPv6 server addresses | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server address string | |
| Tree | address | |
Description | This command specifies DHCPv6 server addresses for the DHCPv6-based address assignment. If multiple server addresses are specified, the first advertised DHCPv6 address received is chosen. | |
| Max. Instances | 8 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance to reach the DHCPv6 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ike-policy reference
| Synopsis | IKE policy ID | |
| Context | configure service ies string interface string sap string ipsec-gateway string ike-policy reference | |
| Tree | ike-policy | |
Reference | configure ipsec ike-policy number | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
local
address-assignment
| Synopsis | Enable the address-assignment context | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment | |
| Tree | address-assignment | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of local address assignments | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the ipv4 context | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcp-server string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local DHCPv4 server name | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv4 dhcp-server string | |
| Tree | dhcp-server | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the pool defined in the specified DHCPv4 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv4 pool string | |
| Tree | pool | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance ID for the local DHCPv4 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv4 router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
secondary-pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the secondary pool defined in the DHCPv4 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv4 secondary-pool string | |
| Tree | secondary-pool | |
| String Length | 1 to 32 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the ipv6 context | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcp-server string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local DHCPv6 server name | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv6 dhcp-server string | |
| Tree | dhcp-server | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Secondary pool name defined in the DHCPv6 server | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv6 pool string | |
| Tree | pool | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance ID hosting the DHCPv6 connection | |
| Context | configure service ies string interface string sap string ipsec-gateway string local address-assignment ipv6 router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local gateway address of the IPsec gateway | |
| Context | configure service ies string interface string sap string ipsec-gateway string local gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
id
| Synopsis | Enter the id context | |
| Context | configure service ies string interface string sap string ipsec-gateway string local id | |
| Tree | id | |
Description | Commands in this context specify the local ID used for the Identification Indicator (IDi) or Identification Responder (IDr) in the IKEv2 tunnel. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
auto
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Select ID based on authentication method in IKE policy | |
| Context | configure service ies string interface string sap string ipsec-gateway string local id auto | |
| Tree | auto | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
fqdn string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FQDN as the local ID type | |
| Context | configure service ies string interface string sap string ipsec-gateway string local id fqdn string | |
| Tree | fqdn | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv4 string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 address as the local ID type | |
| Context | configure service ies string interface string sap string ipsec-gateway string local id ipv4 string | |
| Tree | ipv4 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 address as the local ID type | |
| Context | configure service ies string interface string sap string ipsec-gateway string local id ipv6 (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ipv6 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-history-key-records
| Synopsis | Enter the max-history-key-records context | |
| Context | configure service ies string interface string sap string ipsec-gateway string max-history-key-records | |
| Tree | max-history-key-records | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
esp number
| Synopsis | Maximum number of recent records | |
| Context | configure service ies string interface string sap string ipsec-gateway string max-history-key-records esp number | |
| Tree | esp | |
| Range | 1 to 48 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ike number
| Synopsis | Maximum number of historical IKE keys recorded | |
| Context | configure service ies string interface string sap string ipsec-gateway string max-history-key-records ike number | |
| Tree | ike | |
| Range | 1 to 3 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pre-shared-key string
| Synopsis | Pre-shared key for the IPsec gateway | |
| Context | configure service ies string interface string sap string ipsec-gateway string pre-shared-key string | |
| Tree | pre-shared-key | |
| String Length | 1 to 115 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
radius
accounting-policy reference
| Synopsis | RADIUS accounting policy | |
| Context | configure service ies string interface string sap string ipsec-gateway string radius accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure ipsec radius accounting-policy string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service ies string interface string sap string ipsec-gateway string radius authentication-policy reference | |
| Tree | authentication-policy | |
Reference | configure ipsec radius authentication-policy string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ts-list reference
lag
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service ies string interface string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service ies string interface string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | All |
class number
weight number
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service ies string interface string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-host
| Synopsis | Enter the static-host context | |
| Context | configure service ies string interface string sap string static-host | |
| Tree | static-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4 [ip] string mac string
[ip] string
mac string
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service ies string interface string sap string static-host ipv4 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service ies string interface string sap string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service ies string interface string sap string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service ies string interface string sap string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
shcv-policy-ipv4 reference
| Synopsis | Host connectivity IPv4 policy | |
| Context | configure service ies string interface string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Policy to collect accounting statistics | |
| Context | configure service ies string interface string spoke-sdp string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service ies string interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
app-profile reference
| Synopsis | Application profile name for this SDP | |
| Context | configure service ies string interface string spoke-sdp string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ies string interface string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service ies string interface string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
failure-action keyword
| Synopsis | VCCV BFD action taken on the SDP binding | |
| Context | configure service ies string interface string spoke-sdp string bfd failure-action keyword | |
| Tree | failure-action | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
| Options | ||
| Default | none | |
| Introduced | 21.2.R1 | |
Platforms | All |
wait-for-up-timer number
| Synopsis | Time waited for BFD up status | |
| Context | configure service ies string interface string spoke-sdp string bfd wait-for-up-timer number | |
| Tree | wait-for-up-timer | |
Description | This command configures the time interval that is used to wait for a BFD session to come up. This command is triggered when a spoke-SDP is first administratively enabled and a VCCV BFD session transitions from up to down. The command is required to allow time for BFD sessions to come up, and for BFD to settle before selecting the active spoke-SDP for use in a redundant set. In the case where a VCCV BFD session is bouncing, the timer prevents excessive flapping of the operational state of a spoke-SDP. | |
| Range | 1 to 60 | |
| Units | seconds | |
| Introduced | 21.2.R1 | |
Platforms |
All |
collect-stats boolean
| Synopsis | Allow agent to collect accounting statistics | |
| Context | configure service ies string interface string spoke-sdp string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service ies string interface string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service ies string interface string spoke-sdp string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
filter
ip reference
ipv6 reference
qos
network
policy-name reference
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service ies string interface string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service ies string interface string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service ies string interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service ies string interface string spoke-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service ies string interface string spoke-sdp string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service ies string interface string spoke-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service ies string interface string spoke-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
filter
ip reference
ipv6 reference
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service ies string interface string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service ies string interface string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service ies string interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service ies string interface string spoke-sdp string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service ies string interface string spoke-sdp string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service ies string interface string spoke-sdp string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vc-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Virtual circuit type associated with the SDP binding | |
| Context | configure service ies string interface string spoke-sdp string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All | |
static-tunnel-redundant-nexthop string
| Synopsis | Address for the static ISA tunnel redundant next-hop | |
| Context | configure service ies string interface string static-tunnel-redundant-nexthop string | |
| Tree | static-tunnel-redundant-nexthop | |
Description | This command specifies the redundant next-hop address on public or private IPsec interfaces (with a public or private tunnel SAP) for the static IPsec tunnel. The next-hop address is resolved in the routing table of the corresponding service. | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tos-marking-state keyword
| Synopsis | TOS marking state | |
| Context | configure service ies string interface string tos-marking-state keyword | |
| Tree | tos-marking-state | |
| Options | ||
| Default | untrusted | |
| Introduced | 16.0.R1 | |
Platforms | All |
tunnel boolean
vas-if-type keyword
| Synopsis | VAS interface type | |
| Context | configure service ies string interface string vas-if-type keyword | |
| Tree | vas-if-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
vpls [vpls-name] string
[vpls-name] string
egress
reclassify-using-qos reference
| Synopsis | Egress QoS policy | |
| Context | configure service ies string interface string vpls string egress reclassify-using-qos reference | |
| Tree | reclassify-using-qos | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
routed-override-filter
| Synopsis | Enter the routed-override-filter context | |
| Context | configure service ies string interface string vpls string egress routed-override-filter | |
| Tree | routed-override-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service ies string interface string vpls string egress routed-override-filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn
arp
advertise [route-type] keyword
| Synopsis | Enter the advertise list instance | |
| Context | configure service ies string interface string vpls string evpn arp advertise keyword | |
| Tree | advertise | |
Description | Commands in this context specify the configuration to allow ARP or ND entries that are installed in the ARP or ND cache to be advertised in EVPN MAC/IP routes. The learn-dynamic command must be set to false when using this functionality. | |
| Introduced | 19.10.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service ies string interface string vpls string evpn arp advertise keyword | |
| Tree | advertise | |
Description | This command specifies the type of ARP or ND entries that are installed in the ARP or ND cache into EVPN MAC/IP routes. | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service ies string interface string vpls string evpn arp advertise keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added separately to dynamic or static ARP or ND entries that are advertised in EVPN MAC/IP routes. This tag can be matched on BGP vsi-export (in the R-VPLS) and BGP peer export policies. | |
| Range | 0 to 255 | |
| Introduced | 19.10.R1 | |
|
Platforms | All | |
flood-garp-and-unknown-req boolean
| Synopsis | Allow CPM originated ARP frames to flood R-VPLS service | |
| Context | configure service ies string interface string vpls string evpn arp flood-garp-and-unknown-req boolean | |
| Tree | flood-garp-and-unknown-req | |
Description | When configured to true, the system allows CPM-originated ARP frames to be flooded in the R-VPLS service. Any frames that are data path flooded such as the ARP messages received on a SAP, are flooded irrespective of this command. When configured to false, CPM-originated ARP flooding is suppressed. | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
learn-dynamic boolean
| Synopsis | Process ARP or ND messages on EVPN tunnels | |
| Context | configure service ies string interface string vpls string evpn arp learn-dynamic boolean | |
| Tree | learn-dynamic | |
Description | When configured to true, the system processes ARP or ND messages that arrive on EVPN tunnels. When configured to false, learning is disabled and table entries are not created for these messages. | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
nd
advertise [route-type] keyword
| Synopsis | Enter the advertise list instance | |
| Context | configure service ies string interface string vpls string evpn nd advertise keyword | |
| Tree | advertise | |
Description | Commands in this context specify the configuration to allow ARP or ND entries that are installed in the ARP or ND cache to be advertised in EVPN MAC/IP routes. The learn-dynamic command must be set to false when using this functionality. | |
| Introduced | 20.5.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service ies string interface string vpls string evpn nd advertise keyword | |
| Tree | advertise | |
Description | This command specifies the type of ARP or ND entries that are installed in the ARP or ND cache into EVPN MAC/IP routes. | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 20.5.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service ies string interface string vpls string evpn nd advertise keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added separately to dynamic or static ARP or ND entries that are advertised in EVPN MAC/IP routes. This tag can be matched on BGP vsi-export (in the R-VPLS) and BGP peer export policies. | |
| Range | 0 to 255 | |
| Introduced | 20.5.R1 | |
|
Platforms | All | |
learn-dynamic boolean
| Synopsis | Process ARP or ND messages on EVPN tunnels | |
| Context | configure service ies string interface string vpls string evpn nd learn-dynamic boolean | |
| Tree | learn-dynamic | |
Description | When configured to true, the system processes ARP or ND messages that arrive on EVPN tunnels. When configured to false, learning is disabled and table entries are not created for these messages. | |
| Default | true | |
| Introduced | 20.5.R1 | |
|
Platforms | All |
ingress
routed-override-filter
| Synopsis | Enter the routed-override-filter context | |
| Context | configure service ies string interface string vpls string ingress routed-override-filter | |
| Tree | routed-override-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service ies string interface string vpls string ingress routed-override-filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | All |
redundant-interface [interface-name] string
| Synopsis | Enter the redundant-interface list instance | |
| Context | configure service ies string redundant-interface string | |
| Tree | redundant-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service ies string redundant-interface string | |
| Tree | redundant-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service ies string redundant-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string redundant-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service ies string redundant-interface string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service ies string redundant-interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service ies string redundant-interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service ies string redundant-interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service ies string redundant-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string redundant-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
primary
address string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string redundant-interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-ip string
spoke-sdp [sdp-bind-id] string
| Synopsis | Enter the spoke-sdp list instance | |
| Context | configure service ies string redundant-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sdp-bind-id] string
| Synopsis | SDP binding ID | |
| Context | configure service ies string redundant-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service ies string redundant-interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service ies string redundant-interface string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string redundant-interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service ies string redundant-interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ingress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service ies string redundant-interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service ies string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
subscriber-interface [interface-name] string
| Synopsis | Enter the subscriber-interface list instance | |
| Context | configure service ies string subscriber-interface string | |
| Tree | subscriber-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Subscriber interface name | |
| Context | configure service ies string subscriber-interface string | |
| Tree | subscriber-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the subscriber interface | |
| Context | configure service ies string subscriber-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
fwd-service reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Forwarding service name | |
| Context | configure service ies string subscriber-interface string fwd-service reference | |
| Tree | fwd-service | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
fwd-subscriber-interface reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Forwarding subscriber interface name | |
| Context | configure service ies string subscriber-interface string fwd-subscriber-interface reference | |
| Tree | fwd-subscriber-interface | |
Reference | configure service vprn string subscriber-interface string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
group-interface [group-interface-name] string
| Synopsis | Enter the group-interface list instance | |
| Context | configure service ies string subscriber-interface string group-interface string | |
| Tree | group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[group-interface-name] string
| Synopsis | Group interface name | |
| Context | configure service ies string subscriber-interface string group-interface string | |
| Tree | group-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service ies string subscriber-interface string group-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bonding-parameters
| Synopsis | Enter the bonding-parameters context | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters | |
| Tree | bonding-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of ESM connection bonding | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
connection [connection-index] number
| Synopsis | Enter the connection list instance | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters connection number | |
| Tree | connection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[connection-index] number
| Synopsis | Bonding connection index | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters connection number | |
| Tree | connection | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
service string
| Synopsis | Connection service | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters connection number service string | |
| Tree | service | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fpe reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FPE that provisions bonding functionality | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters fpe reference | |
| Tree | fpe | |
Reference | configure fwd-path-ext fpe number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
multicast
| Synopsis | Enter the multicast context | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters multicast | |
| Tree | multicast | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
connection (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multicast connection | |
| Context | configure service ies string subscriber-interface string group-interface string bonding-parameters multicast connection (number | keyword) | |
| Tree | connection | |
| Range | 1 to 2 | |
| Options | ||
| Default | use-incoming | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
brg
| Synopsis | Enter the brg context | |
| Context | configure service ies string subscriber-interface string group-interface string brg | |
| Tree | brg | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BRG | |
| Context | configure service ies string subscriber-interface string group-interface string brg admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
authenticated-brg-only boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow BRGs that have been pre-authenticated | |
| Context | configure service ies string subscriber-interface string group-interface string brg authenticated-brg-only boolean | |
| Tree | authenticated-brg-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
default-brg-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default BRG profile for new BRGs | |
| Context | configure service ies string subscriber-interface string group-interface string brg default-brg-profile reference | |
| Tree | default-brg-profile | |
Reference | configure subscriber-mgmt vrgw brg-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
cflowd-parameters
| Synopsis | Enter the cflowd-parameters context | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters | |
| Tree | cflowd-parameters | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sampling [sampling-type] keyword
| Synopsis | Enter the sampling list instance | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sampling-type] keyword
| Synopsis | Traffic sampling type | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
Description | This command configures the type of traffic to be sampled on the associated IP interface. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
direction keyword
| Synopsis | Direction of traffic for cflowd sampling | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters sampling keyword direction keyword | |
| Tree | direction | |
Description | This command configures the direction in which sampling occurs on the associated IP interfaces. | |
| Options | ||
| Default | ingress-only | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sample-profile (keyword | number)
| Synopsis | Sample profile ID | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters sampling keyword sample-profile (keyword | number) | |
| Tree | sample-profile | |
Description | This command defines the sampling rate profile associated with this interface. | |
| Max. Range | 0 to 4294967295 | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Type of cflowd analysis | |
| Context | configure service ies string subscriber-interface string group-interface string cflowd-parameters sampling keyword type keyword | |
| Tree | type | |
Description | This command configures the cflowd sampling type on the associated IP interface. | |
| Options | ||
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
data-trigger
| Synopsis | Enter the data-trigger context | |
| Context | configure service ies string subscriber-interface string group-interface string data-trigger | |
| Tree | data-trigger | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of data-triggered host creation | |
| Context | configure service ies string subscriber-interface string group-interface string data-trigger admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-routes-track-srrp
| Synopsis | Enable the dynamic-routes-track-srrp context | |
| Context | configure service ies string subscriber-interface string group-interface string dynamic-routes-track-srrp | |
| Tree | dynamic-routes-track-srrp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Time before route state updated after SRRP transition | |
| Context | configure service ies string subscriber-interface string group-interface string dynamic-routes-track-srrp hold-time number | |
| Tree | hold-time | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gtp-parameters
| Synopsis | Enter the gtp-parameters context | |
| Context | configure service ies string subscriber-interface string group-interface string gtp-parameters | |
| Tree | gtp-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of GTP access | |
| Context | configure service ies string subscriber-interface string group-interface string gtp-parameters admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fpe reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | PE that provisions the GTP user interface | |
| Context | configure service ies string subscriber-interface string group-interface string gtp-parameters fpe reference | |
| Tree | fpe | |
Reference | configure fwd-path-ext fpe number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gx-policy reference
| Synopsis | Diameter application policy | |
| Context | configure service ies string subscriber-interface string group-interface string gx-policy reference | |
| Tree | gx-policy | |
Reference | configure subscriber-mgmt diameter-gx-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service ies string subscriber-interface string group-interface string ingress | |
| Tree | ingress | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-accounting reference
| Synopsis | Ingress policy accounting template name | |
| Context | configure service ies string subscriber-interface string group-interface string ingress policy-accounting reference | |
| Tree | policy-accounting | |
Reference | configure routing-options policy-accounting policy-acct-template string | |
| Introduced | 19.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s |
ingress-stats boolean
| Synopsis | Collect ingress interface statistics | |
| Context | configure service ies string subscriber-interface string group-interface string ingress-stats boolean | |
| Tree | ingress-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | Interface IP MTU | |
| Context | configure service ies string subscriber-interface string group-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-linking
| Synopsis | Enter the ipoe-linking context | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-linking | |
| Tree | ipoe-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IPoE host linking | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-linking admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gratuitous-router-advertisement boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send unsolicited router advertisement after DHCP setup | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-linking gratuitous-router-advertisement boolean | |
| Tree | gratuitous-router-advertisement | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
shared-circuit-id boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable circuit ID in DHCPv4 Option82 to validate DHCPv6 | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-linking shared-circuit-id boolean | |
| Tree | shared-circuit-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ipoe-session
| Synopsis | Enter the ipoe-session context | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session | |
| Tree | ipoe-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IPoE session management | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-auth
| Synopsis | Enter the force-auth context | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session force-auth | |
| Tree | force-auth | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cid-change boolean
| Synopsis | Ignore min-auth-interval when circuit ID changed | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session force-auth cid-change boolean | |
| Tree | cid-change | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rid-change boolean
| Synopsis | Ignore min-auth-interval when remote ID changed | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session force-auth rid-change boolean | |
| Tree | rid-change | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPoE Session policy to be used for new sessions | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session ipoe-session-policy reference | |
| Tree | ipoe-session-policy | |
Reference | configure subscriber-mgmt ipoe-session-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
min-auth-interval (keyword | number)
| Synopsis | Minimum time between two authentication attempts | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session min-auth-interval (keyword | number) | |
| Tree | min-auth-interval | |
| Range | 1 to 32000000 | |
| Units | seconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-session-timeout keyword
| Synopsis | Session timeout attribute to be interpreted | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session radius-session-timeout keyword | |
| Tree | radius-session-timeout | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-session-limit number
| Synopsis | Maximum number of sessions per SAP | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session sap-session-limit number | |
| Tree | sap-session-limit | |
| Range | 1 to 131071 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum number of sessions on this group interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session session-limit number | |
| Tree | session-limit | |
| Range | 1 to 500000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stateless-redundancy boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remove IPoE sessions when the system becomes stand-by in a stateless multi-chassis redundancy setup | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session stateless-redundancy boolean | |
| Tree | stateless-redundancy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for IPoE session authentication | |
| Context | configure service ies string subscriber-interface string group-interface string ipoe-session user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arp-host
| Synopsis | Enter the arp-host context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 arp-host | |
| Tree | arp-host | |
| Introduced | 16.0.R6 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of ARP hosts | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 arp-host admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-limit number
| Synopsis | Maximum number of ARP hosts | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 arp-host host-limit number | |
| Tree | host-limit | |
| Range | 1 to 524287 | |
| Introduced | 16.0.R6 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-auth-interval number
| Synopsis | Minimum authentication interval | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 arp-host min-auth-interval number | |
| Tree | min-auth-interval | |
| Range | 1 to 6000 | |
| Units | minutes | |
| Default | 15 | |
| Introduced | 16.0.R6 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-host-limit number
| Synopsis | Maximum number of ARP hosts per SAP | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 arp-host sap-host-limit number | |
| Tree | sap-host-limit | |
| Range | 1 to 131071 | |
| Default | 1 | |
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp
| Synopsis | Enter the dhcp context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp | |
| Tree | dhcp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Enable PPPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter reference
| Synopsis | DHCP filter ID for the group interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp filter reference | |
| Tree | filter | |
Reference | configure filter dhcp-filter number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2-header
| Synopsis | Enable the l2-header context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp lease-populate l2-header | |
| Tree | l2-header | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | IEEE address used in anti-spoofing entries for the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp lease-populate l2-header mac string | |
| Tree | mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
match-circuit-id boolean
| Synopsis | Enable Option 82 circuit ID on relayed DHCP packets | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp match-circuit-id boolean | |
| Tree | match-circuit-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
offer-selection
| Synopsis | Enter the offer-selection context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection | |
| Tree | offer-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages from the specified MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Offer selection | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac mac-address keyword | |
| Tree | mac-address | |
Description | This command specifies the client MAC addresses for which the Discover delay applies. | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages. The delay is applied to all DHCP Discover messages for which no per DHCP server or per client MAC delay is configured. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv4-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv4-address] string
| Synopsis | IP address of the DHCP server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay DHCP Discover messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
action keyword
| Synopsis | Action to take with received DHCP Option 82 | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 action keyword | |
| Tree | action | |
| Options | ||
| Default | keep | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
circuit-id
| Synopsis | Enter the circuit-id context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id | |
| Tree | circuit-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-tuple
| Synopsis | Use the ASCII-encoded tuple for the circuit ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ifindex
| Synopsis | Use the interface index for the circuit ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id ifindex | |
| Tree | ifindex | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
none
| Synopsis | Do not include the circuit ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id none | |
| Tree | none | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use the SAP ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vlan-ascii-tuple
| Synopsis | Include the VLAN ID and dot1p bits in the ASCII tuple | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id vlan-ascii-tuple | |
| Tree | vlan-ascii-tuple | |
Description | When configured, the router includes the VLAN ID and dot1p bits with the ASCII-tuple information. This only occurs on dot1q and QinQ-encapsulated ports. When the Option 82 bits are stripped, dot1p bits are copied to the Ethernet header of the outgoing packet. When unconfigured, the router leaves the circuit ID sub-option of the DHCP packet empty. | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-id
| Synopsis | Enter the remote-id context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id | |
| Tree | remote-id | |
Description | Commands in this context configure the remote IP sub-option of the DHCP packet with the identity of the remote host end (typically the DHCP client). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | User-defined ASCII string for the remote ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac
| Synopsis | Use the MAC address for the remote ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id mac | |
| Tree | mac | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
none
| Synopsis | Do not include the remote ID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id none | |
| Tree | none | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool-name boolean
| Synopsis | Send the pool name in the VSO | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option pool-name boolean | |
| Tree | pool-name | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id boolean
| Synopsis | Send SAP ID in the sub-option of the DHCP relay packet | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option sap-id boolean | |
| Tree | sap-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | User-defined ASCII string for the VSO | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option string string | |
| Tree | string | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
system-id boolean
| Synopsis | Send the system ID in the VSO | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option system-id boolean | |
| Tree | system-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
emulated-server string
| Synopsis | IP address used as DHCP server address in SAP context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | DHCP lease time | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy name | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Description | This command associates a Python policy name with the interface. | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-include-gi-address boolean
| Synopsis | Include gateway IP address in DHCP Release messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | IP addresses for DHCP server requests | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp server string | |
| Tree | server | |
Description | This command configures a list of servers that this interface forwards requests to. The operator can enter the list of servers as either IP addresses or fully qualified domain names. The operator must specify at least one server specified for DHCP relay to work. If there are multiple servers, the system forwards the request to all the servers in the list. | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
trusted boolean
| Synopsis | Relay untrusted packets | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp trusted boolean | |
| Tree | trusted | |
Description | When configured to true, the router enables the trusted mode on the interface. When enabled, the relay agent changes the existing GI address (of the request) to the ingress interface, and forwards the request. A DHCP request that contains a GI address of 0.0.0.0 and an Option 82 field in the packet is discarded unless it arrives on a trusted circuit. This behavior only applies if the Relay Agent Information Option action is to keep the existing information. When the Option 82 field is replaced by the relay agent, the original Option 82 information is lost, and there is no reason to enable the trusted option. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 dhcp user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
icmp
| Synopsis | Enter the icmp context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp | |
| Tree | icmp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mask-reply boolean
| Synopsis | Allow responses to ICMP mask requests on the interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp mask-reply boolean | |
| Tree | mask-reply | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp param-problem | |
| Tree | param-problem | |
Description | Commands in this context specify the settings for ICMP Parameter Problem messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sent Parameter Problem messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of Parameter Problem messages to send | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp param-problem number number | |
| Tree | number | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit number of Parameter Problem messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp param-problem seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
redirects
| Synopsis | Enter the redirects context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp redirects | |
| Tree | redirects | |
Description | Commands in this context configure the settings for ICMP redirect messages generated by the interface. The system sends ICMP redirect messages to alert the sending node that a more optimal route is available on another router on the same subnetwork. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending ICMP redirect messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of ICMP redirect messages to send | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp redirects number number | |
| Tree | number | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit the number of ICMP redirect messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp redirects seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ttl-expired
| Synopsis | Enter the ttl-expired context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp ttl-expired | |
| Tree | ttl-expired | |
Description | Commands in this context configure the settings for ICMP TTL expired messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending TTL expired messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp ttl-expired admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of TTL expired messages to send | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp ttl-expired number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit the number of TTL expired messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp ttl-expired seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-matching-address boolean
| Synopsis | Use the subscriber interface address as source address | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp ttl-expired use-matching-address boolean | |
| Tree | use-matching-address | |
Description | When configured to true, the system uses a matching subscriber interface address as the source address of the ICMP TTL expired message. For matching to occur, the source address of the offending packet must be in the same subnet of the subscriber interface address. When configured to false, the system uses the first configured address. | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp unreachables | |
| Tree | unreachables | |
Description | Commands in this context specify the settings for ICMP host and network destination unreachable messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending unreachable messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of unreachable messages to send | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp unreachables number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time to limit the number of ICMP unreachable messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 icmp unreachables seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-df-bit boolean
| Synopsis | Ignore DF bit in the IPv4 header when fragmenting | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 ignore-df-bit boolean | |
| Tree | ignore-df-bit | |
Description | When configured to true, fragmentation is applied according to the applicable egress MTU instead of the DF bit for frames egressing the WLAN-GW group. The DF bit is reset for frames that are fragmented. When configured to false, the router fragments a packet larger than the MTU if the DF bit is set to 0 and drops the packet if the DF bit is set to 1. | |
| Default | false | |
| Introduced | 20.5.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-proxy-arp boolean
| Synopsis | Enable local proxy ARP on interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery local-proxy-arp boolean | |
| Tree | local-proxy-arp | |
Description | When configured to true, the router enables local proxy ARP on the interface. When configured to false, the router does not respond to ARP requests for addresses on the same subnet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
populate boolean
| Synopsis | Allow population of static and dynamic hosts | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery populate boolean | |
| Tree | populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-arp-policy reference
| Synopsis | Proxy ARP policy name | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery proxy-arp-policy reference | |
| Tree | proxy-arp-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-proxy-arp boolean
| Synopsis | Enable remote proxy ARP on the interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery remote-proxy-arp boolean | |
| Tree | remote-proxy-arp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Timeout for an ARP entry learned on the interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 neighbor-discovery timeout number | |
| Tree | timeout | |
| Range | 0 to 65535 | |
| Units | seconds | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos-route-lookup keyword
| Synopsis | QoS route lookup | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mode keyword
| Synopsis | Unicast RPF check mode | |
| Context | configure service ies string subscriber-interface string group-interface string ipv4 urpf-check mode keyword | |
| Tree | mode | |
| Options | ||
| Default | strict | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enable the ipv6 context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-multiple-wan-addresses boolean
| Synopsis | Allow multiple WAN addresses | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 allow-multiple-wan-addresses boolean | |
| Tree | allow-multiple-wan-addresses | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-reply
| Synopsis | Enter the auto-reply context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 auto-reply | |
| Tree | auto-reply | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-solicitation boolean
| Synopsis | Enable auto-reply for NS | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 auto-reply neighbor-solicitation boolean | |
| Tree | neighbor-solicitation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicitation boolean
| Synopsis | Enable auto-reply for RS | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 auto-reply router-solicitation boolean | |
| Tree | router-solicitation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
| Synopsis | Enter the dhcp6 context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 | |
| Tree | dhcp6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter reference
| Synopsis | DHCPv6 filter | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 filter reference | |
| Tree | filter | |
Reference | configure filter dhcp6-filter number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option
| Synopsis | Enter the option context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option | |
| Tree | option | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface-id
| Synopsis | Enter the interface-id context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id | |
| Tree | interface-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-tuple
| Synopsis | Use ASCII-encoded concatenated tuple | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
if-index
| Synopsis | Use interface index in the DHCPv6 relay packet | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id if-index | |
| Tree | if-index | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use SAP ID in interface ID option in relay packet | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | String for interface ID option in DHCPv6 relay packet | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id string string | |
| Tree | string | |
| String Length | 1 to 80 | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-id boolean
| Synopsis | Send remote ID option in the DHCPv6 relay packet | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 option remote-id boolean | |
| Tree | remote-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
override-slaac boolean
| Synopsis | Allow WAN address offered by DHCP to overwrite the WAN address acquired from SLAAC | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 override-slaac boolean | |
| Tree | override-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pd-managed-route
| Synopsis | Enable the pd-managed-route context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 pd-managed-route | |
| Tree | pd-managed-route | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
next-hop keyword
| Synopsis | Next hop type | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 pd-managed-route next-hop keyword | |
| Tree | next-hop | |
| Options | ||
| Default | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for prefix to remain preferred on this interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rebind-timer number
| Synopsis | Rebind timer (T2) for this interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server rebind-timer number | |
| Tree | rebind-timer | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-timer number
| Synopsis | Renew timer (T1) | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server renew-timer number | |
| Tree | renew-timer | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server-id
| Synopsis | Enter the server-id context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id | |
| Tree | server-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-ascii string
| Synopsis | Vendor-assigned ID based on Enterprise Number (DUID-EN) | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-en-ascii string | |
| Tree | duid-en-ascii | |
| String Length | 1 to 58 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-hex string
| Synopsis | DUID system ID in hexadecimal format | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-en-hex string | |
| Tree | duid-en-hex | |
| String Length | 1 to 118 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-ll
| Synopsis | Use link-layer address (DUID-LL) as DUID | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-ll | |
| Tree | duid-ll | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for prefix to remain valid on this interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay
| Synopsis | Enter the relay context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay | |
| Tree | relay | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
advertise-selection
| Synopsis | Enter the advertise-selection context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection | |
| Tree | advertise-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Advertise selection | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac mac-address keyword | |
| Tree | mac-address | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent from the designated client MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv6-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-address] string
| Synopsis | IP address of the DHCPv6 server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages. The delay is applied to DHCPv6 Solicit messages for which no overriding value is configured in the server instance or the client-mac context. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-split
| Synopsis | Enter the lease-split context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split | |
| Tree | lease-split | |
Description | Commands in this context configure DHCPv6 lease split. DHCPv6 lease split is active when administratively enabled and for all IA_NA and IA_PD options in the transaction, the configured lease split valid lifetime (short lease time) is less than or equal to one of the following:
| |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 lease split | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | DHCPv6 lease split valid lifetime (short lease time) | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split valid-lifetime number | |
| Tree | valid-lifetime | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | Link address for the DHCPv6 relay messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | DHCP6 server(s) to which the DHCP6 requests are forwarded | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-address string
| Synopsis | Source IPv6 address for the DHCPv6 relay messages | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
snooping
| Synopsis | Enter the snooping context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 snooping | |
| Tree | snooping | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 snooping | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 snooping admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
user-db reference
| Synopsis | Local user database for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-ident keyword
| Synopsis | DHCP6 user identification for this interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 dhcp6 user-ident keyword | |
| Tree | user-ident | |
| Options | ||
| Default | mac | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-bridged-mode boolean
| Synopsis | Enable IPv6 IPoE bridged mode | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 ipoe-bridged-mode boolean | |
| Tree | ipoe-bridged-mode | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dad-snooping boolean
| Synopsis | Populate table via duplicate address detection packets | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 neighbor-discovery dad-snooping boolean | |
| Tree | dad-snooping | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-limit number
| Synopsis | Maximum neighbor entries learned per SLAAC host | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 neighbor-discovery neighbor-limit number | |
| Tree | neighbor-limit | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos-route-lookup keyword
| Synopsis | QoS route lookup | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
router-advertisements
| Synopsis | Enter the router-advertisements context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements | |
| Tree | router-advertisements | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router advertisements | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-mcast keyword
| Synopsis | Protocol with forced multicast | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements force-mcast keyword | |
| Tree | force-mcast | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-advertisement-interval number
| Synopsis | Maximum advertisement interval | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 900 to 1800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-advertisement-interval number
| Synopsis | Minimum advertisement interval | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 900 to 1350 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
| Synopsis | Enter the options context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options | |
| Tree | options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
current-hop-limit number
| Synopsis | Hop limit to be advertised | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options current-hop-limit number | |
| Tree | current-hop-limit | |
| Range | 0 to 255 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dns
| Synopsis | Enter the dns context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options dns | |
| Tree | dns | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
include-rdnss boolean
| Synopsis | Include the RDNSS server option 25 | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options dns include-rdnss boolean | |
| Tree | include-rdnss | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rdnss-lifetime (number | keyword)
| Synopsis | Maximum time for the RDNSS address to remain valid | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options dns rdnss-lifetime (number | keyword) | |
| Tree | rdnss-lifetime | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-configuration boolean
| Synopsis | Managed address configuration flag | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options managed-configuration boolean | |
| Tree | managed-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mtu (number | keyword)
| Synopsis | Advertised MTU value | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options mtu (number | keyword) | |
| Tree | mtu | |
| Range | 1280 to 9212 | |
| Units | bytes | |
| Options | ||
| Default | not-included | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
other-stateful-configuration boolean
| Synopsis | Other stateful configuration flag | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options other-stateful-configuration boolean | |
| Tree | other-stateful-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reachable-time number
| Synopsis | Reachable time for advertisements | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retransmit-timer number
| Synopsis | Retransmit time in router advertisements from interface | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options retransmit-timer number | |
| Tree | retransmit-timer | |
| Range | 0 to 1800000 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-lifetime (number | keyword)
| Synopsis | Router lifetime | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements options router-lifetime (number | keyword) | |
| Tree | router-lifetime | |
| Range | 2700 to 9000 | |
| Units | seconds | |
| Options | ||
| Default | 4500 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-options
| Synopsis | Enter the prefix-options context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options | |
| Tree | prefix-options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
autonomous boolean
| Synopsis | Value of the autonomous flag | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options autonomous boolean | |
| Tree | autonomous | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
on-link boolean
| Synopsis | Assign the prefix to an interface on the specified link | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options on-link boolean | |
| Tree | on-link | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain preferred | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain valid | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicit
| Synopsis | Enter the router-solicit context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-solicit | |
| Tree | router-solicit | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router-solicit authentication | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-solicit admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
inactivity-timer (number | keyword)
| Synopsis | Time before an inactive host is removed | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-solicit inactivity-timer (number | keyword) | |
| Tree | inactivity-timer | |
| Range | 1 to 31536000 | |
| Units | seconds | |
| Options | ||
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-auth-interval number
| Synopsis | Minimum time between successive authentication attempts | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-solicit min-auth-interval number | |
| Tree | min-auth-interval | |
| Range | 1 to 360000 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database used for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 router-solicit user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mode keyword
| Synopsis | Unicast RPF check mode | |
| Context | configure service ies string subscriber-interface string group-interface string ipv6 urpf-check mode keyword | |
| Tree | mode | |
| Options | ||
| Default | strict | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-address-assignment
| Synopsis | Enter the local-address-assignment context | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment | |
| Tree | local-address-assignment | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Local Address Assignment | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe boolean
| Synopsis | Request local addresses for non-DHCP/managed IPoE hosts | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications ipoe boolean | |
| Tree | ipoe | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Request local addresses for PPP IPCP hosts | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-pool string
| Synopsis | Default pools | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 default-pool string | |
| Tree | default-pool | |
| String Length | 1 to 32 | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv4 server for local pools management | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv4 server reference | |
| Tree | server | |
Reference | configure router string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enter the ipv6 context | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-slaac boolean
| Synopsis | Request local addresses for IPoE SLAAC hosts | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ipoe-slaac boolean | |
| Tree | ipoe-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-wan boolean
| Synopsis | Request local addresses for IPoE IA NA hosts | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ipoe-wan boolean | |
| Tree | ipoe-wan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp-slaac boolean
| Synopsis | Request local addresses for PPP SLAAC hosts | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ppp-slaac boolean | |
| Tree | ppp-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv6 server for local pools management | |
| Context | configure service ies string subscriber-interface string group-interface string local-address-assignment ipv6 server reference | |
| Tree | server | |
Reference | configure router string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address for the interface | |
| Context | configure service ies string subscriber-interface string group-interface string mac string | |
| Tree | mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nasreq-auth-policy reference
| Synopsis | Diameter NASREQ application policy to use for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string nasreq-auth-policy reference | |
| Tree | nasreq-auth-policy | |
Reference | configure subscriber-mgmt diameter-nasreq-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
oper-up-while-empty boolean
| Synopsis | Enable this group interface without any active SAPs | |
| Context | configure service ies string subscriber-interface string group-interface string oper-up-while-empty boolean | |
| Tree | oper-up-while-empty | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe
| Synopsis | Enter the pppoe context | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe | |
| Tree | pppoe | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of PPPoE | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | PPPoE anti-spoof filtering | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Default | mac-sid | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp-client
| Synopsis | Enter the dhcp-client context | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe dhcp-client | |
| Tree | dhcp-client | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-id keyword
| Synopsis | Type of information that DHCP option 61 contains | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe dhcp-client client-id keyword | |
| Tree | client-id | |
| Options | ||
| Introduced | 16.0.R7 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | PPPoE policy | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe policy reference | |
| Tree | policy | |
Reference | configure subscriber-mgmt ppp-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy used to modify PPPoE packets | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-session-limit number
| Synopsis | Maximum PPPoE sessions per SAP | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe sap-session-limit number | |
| Tree | sap-session-limit | |
| Range | 1 to 131071 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum PPPoE sessions | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe session-limit number | |
| Tree | session-limit | |
| Range | 1 to 333823 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string pppoe user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
radius-auth-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service ies string subscriber-interface string group-interface string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
redundant-interface reference
| Synopsis | Redundant interface | |
| Context | configure service ies string subscriber-interface string group-interface string redundant-interface reference | |
| Tree | redundant-interface | |
Reference | configure service ies string redundant-interface string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
| Synopsis | Enter the sap list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string | |
| Tree | sap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service ies string subscriber-interface string group-interface string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | Type of anti-spoof filtering | |
| Context | configure service ies string subscriber-interface string group-interface string sap string anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
calling-station-id string
| Synopsis | Calling station ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string calling-station-id string | |
| Tree | calling-station-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service ies string subscriber-interface string group-interface string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service ies string subscriber-interface string group-interface string sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
default-host
| Synopsis | Enter the default-host context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host | |
| Tree | default-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ipv4 [address] reference prefix-length number
| Synopsis | Enter the ipv4 list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
[address] reference
| Synopsis | IPv4 default host address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
Reference | configure service ies string subscriber-interface string ipv4 address string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
| Range | 0 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
next-hop string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Next hop IP address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number next-hop string | |
| Tree | next-hop | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s | |
ipv6 [address] string prefix-length number
| Synopsis | Enter the ipv6 list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
[address] string
| Synopsis | IPv6 default host address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
prefix-length number
| Synopsis | IPv6 address prefix length | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
| Range | 0 to 128 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
next-hop string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Next hop IP address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number next-hop string | |
| Tree | next-hop | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s | |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
egress
| Synopsis | Enter the egress context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
agg-rate
| Synopsis | Enter the agg-rate context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate | |
| Tree | agg-rate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rate number
| Synopsis | Enforced aggregate rate for all queues | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress agg-rate rate number | |
| Tree | rate | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter
| Synopsis | Enter the filter context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos
| Synopsis | Enter the qos context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
eth-cfm
| Synopsis | Enter the eth-cfm context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm | |
| Tree | eth-cfm | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
csf
| Synopsis | Enable the csf context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
grace
| Synopsis | Enter the grace context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service ies string subscriber-interface string group-interface string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-admin-state keyword
| Synopsis | Administrative state of the hosts | |
| Context | configure service ies string subscriber-interface string group-interface string sap string host-admin-state keyword | |
| Tree | host-admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service ies string subscriber-interface string group-interface string sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of multicast groups to track per group | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of multicast groups to be tracked | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of multicast sources to be tracked | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable IGMP router alert check option | |
| Context | configure service ies string subscriber-interface string group-interface string sap string igmp-host-tracking router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter
| Synopsis | Enter the filter context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos
| Synopsis | Enter the qos context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lag
| Synopsis | Enter the lag context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string lag | |
| Tree | lag | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service ies string subscriber-interface string group-interface string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
class number
| Synopsis | Class used on LAG egress using weighted per-link-hash | |
| Context | configure service ies string subscriber-interface string group-interface string sap string lag per-link-hash class number | |
| Tree | class | |
| Range | 1 to 3 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight used on LAG egress using weighted per-link-hash | |
| Context | configure service ies string subscriber-interface string group-interface string sap string lag per-link-hash weight number | |
| Tree | weight | |
| Range | 1 to 1024 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
monitor-oper-group reference
| Synopsis | Monitor operational group | |
| Context | configure service ies string subscriber-interface string group-interface string sap string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service ies string subscriber-interface string group-interface string sap string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
static-host
| Synopsis | Enter the static-host context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host | |
| Tree | static-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4 [ip] string mac string
| Synopsis | Enter the ipv4 list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ip] string
| Synopsis | IPv4 address used by the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address used by the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | Scope of the static host application profile | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subscriber | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-route [prefix] string
| Synopsis | Enter the managed-route list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string | |
| Tree | managed-route | |
Description | Commands in this context configure managed route parameters. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix] string
| Synopsis | Managed route prefix associated with IPv4 static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string | |
| Tree | managed-route | |
Description | This command configures the managed route prefix. The prefix length must be in the range of 1 to 32. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpe-check
| Synopsis | Enable the cpe-check context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check | |
| Tree | cpe-check | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the target CPE device | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | destination-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 22.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failed-action
| Synopsis | Enter the failed-action context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action | |
| Tree | failed-action | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the provisioned managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated to the provisioned managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag used if CPE check fails | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
withdraw boolean
| Synopsis | Withdraw the route when the CPE check fails | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action withdraw boolean | |
| Tree | withdraw | |
| Default | false | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Source IP address used in the ICMP messages | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Time interval determining that a ping is missed | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check timeout number | |
| Tree | timeout | |
| Range | 1 to 10 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rip-policy reference
| Synopsis | RIP policy name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string rip-policy reference | |
| Tree | rip-policy | |
Reference | configure subscriber-mgmt rip-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv
| Synopsis | Enter the shcv context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string shcv | |
| Tree | shcv | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6 [prefix] string mac string
| Synopsis | Enter the ipv6 list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix] string
| Synopsis | IPv6 prefix | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | Scope of the static host application profile | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subscriber | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-linking string
| Synopsis | IPv6 host linked with IPv4 host via learned MAC address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string mac-linking string | |
| Tree | mac-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-route [ipv6-prefix] string
| Synopsis | Enter the managed-route list instance | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string | |
| Tree | managed-route | |
Description | Commands in this context configure managed route parameters. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-prefix] string
| Synopsis | Managed route prefix associated with IPv6 static host | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string | |
| Tree | managed-route | |
Description | This command configures the managed route prefix. The prefix length must be in the range of 1 to 128. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpe-check
| Synopsis | Enable the cpe-check context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check | |
| Tree | cpe-check | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the target CPE device | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | destination-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 22.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failed-action
| Synopsis | Enter the failed-action context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action | |
| Tree | failed-action | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the provisioned managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated to the provisioned managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag used if CPE check fails | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
withdraw boolean
| Synopsis | Withdraw the route when the CPE check fails | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action withdraw boolean | |
| Tree | withdraw | |
| Default | false | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Source IP address used in the ICMP messages | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Time interval determining that a ping is missed | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check timeout number | |
| Tree | timeout | |
| Range | 1 to 10 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag associated with the managed route | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retail-svc-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Retail service ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string retail-svc-id number | |
| Tree | retail-svc-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
shcv
| Synopsis | Enter the shcv context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string shcv | |
| Tree | shcv | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
data-triggered boolean
| Synopsis | Enable learning of MAC addresses from data packets | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host mac-learning data-triggered boolean | |
| Tree | data-triggered | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
single-mac boolean
| Synopsis | Enforce single MAC address and subscriber for the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string static-host mac-learning single-mac boolean | |
| Tree | single-mac | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-sla-mgmt
| Synopsis | Enter the sub-sla-mgmt context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt | |
| Tree | sub-sla-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of SAP subscriber management | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
| Synopsis | Enter the defaults context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults | |
| Tree | defaults | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Default application profile name for this SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id
| Synopsis | Enter the int-dest-id context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id | |
| Tree | int-dest-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Use the configured string | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id string string | |
| Tree | string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
top-q-tag
| Synopsis | Use the top Q-tag of this SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id top-q-tag | |
| Tree | top-q-tag | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Default SLA profile for hosts on this SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Default subscriber profile for the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-id
| Synopsis | Use auto-generated subscriber identification string | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id auto-id | |
| Tree | auto-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use SAP ID as default subscriber identification string | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Default subscriber identification string for the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
single-sub-parameters
| Synopsis | Enter the single-sub-parameters context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters | |
| Tree | single-sub-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
non-sub-traffic
| Synopsis | Enable the non-sub-traffic context | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic | |
| Tree | non-sub-traffic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name for all non-subscriber traffic | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile applicable for all non-subscriber traffic | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Subscriber profile all non-subscriber traffic | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Subscriber ID applied for all non-subscriber traffic | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic subscriber-id string | |
| Tree | subscriber-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
profiled-traffic-only boolean
| Synopsis | Include all traffic in subscriber profile | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters profiled-traffic-only boolean | |
| Tree | profiled-traffic-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-ident-policy reference
| Synopsis | Subscriber identification policy used on this SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt sub-ident-policy reference | |
| Tree | sub-ident-policy | |
Reference | configure subscriber-mgmt sub-ident-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-limit (keyword | number)
| Synopsis | Maximum number of subscribers on this SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap string sub-sla-mgmt subscriber-limit (keyword | number) | |
| Tree | subscriber-limit | |
| Range | 1 to 131071 | |
| Options | ||
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-parameters
| Synopsis | Enter the sap-parameters context | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters | |
| Tree | sap-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | Anti-spoof type of the SAP | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Default | ip-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-sla-mgmt
| Synopsis | Enter the sub-sla-mgmt context | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt | |
| Tree | sub-sla-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
| Synopsis | Enter the defaults context | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults | |
| Tree | defaults | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Default application profile name | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Default SLA profile | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Default subscriber profile | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-id
| Synopsis | Subscriber ID that is autogenerated | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id auto-id | |
| Tree | auto-id | |
Notes | The following elements are part of a choice: auto-id or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | String to be used as default subscriber ID | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: auto-id or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-ident-policy reference
| Synopsis | Subscriber identification policy | |
| Context | configure service ies string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt sub-ident-policy reference | |
| Tree | sub-ident-policy | |
Reference | configure subscriber-mgmt sub-ident-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy reference
| Synopsis | SHCV policy for IPv4 and IPv6 subscriber hosts | |
| Context | configure service ies string subscriber-interface string group-interface string shcv-policy reference | |
| Tree | shcv-policy | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy-ipv4 reference
| Synopsis | SHCV for IPv4 subscriber hosts | |
| Context | configure service ies string subscriber-interface string group-interface string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy-ipv6 reference
| Synopsis | SHCV for IPv6 subscriber hosts | |
| Context | configure service ies string subscriber-interface string group-interface string shcv-policy-ipv6 reference | |
| Tree | shcv-policy-ipv6 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
srrp [srrp-id] number
| Synopsis | Enter the srrp list instance | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number | |
| Tree | srrp | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[srrp-id] number
| Synopsis | SRRP instance ID | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number | |
| Tree | srrp | |
| Range | 1 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of SRRP | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dest-ip string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination IPv4 prefix | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gw-mac string
| Synopsis | Gateway MAC address | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number gw-mac string | |
| Tree | gw-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
keep-alive-interval number
| Synopsis | Interval between SRRP advertisements | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number keep-alive-interval number | |
| Tree | keep-alive-interval | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
message-path reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SAP to use as the SRRP message path | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number message-path reference | |
| Tree | message-path | |
Reference | configure service ies string subscriber-interface string group-interface string sap string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
monitor-oper-group
| Synopsis | Enter the monitor-oper-group context | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number monitor-oper-group | |
| Tree | monitor-oper-group | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-name reference
| Synopsis | Operational group name | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number monitor-oper-group group-name reference | |
| Tree | group-name | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
priority-step number
| Synopsis | Step value to change priority of SRRP instance | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number monitor-oper-group priority-step number | |
| Tree | priority-step | |
| Range | 1 to 10 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
one-garp-per-sap boolean
| Synopsis | Send one gratuitous ARP to each SAP | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number one-garp-per-sap boolean | |
| Tree | one-garp-per-sap | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | VRRP priority control policy associated with the SRRP | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number policy reference | |
| Tree | policy | |
Reference | ||
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preempt boolean
| Synopsis | Allow the SRRP instance to override an existing master | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number preempt boolean | |
| Tree | preempt | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
priority number
| Synopsis | Priority for this interface at this level | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number priority number | |
| Tree | priority | |
| Range | 1 to 254 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
send-fib-population-packets keyword
| Synopsis | Mode used to send FIB population packets on switchover | |
| Context | configure service ies string subscriber-interface string group-interface string srrp number send-fib-population-packets keyword | |
| Tree | send-fib-population-packets | |
| Options | ||
| Default | all | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
suppress-aa-sub boolean
| Synopsis | Enable application assurance suppression for ESM subscribers | |
| Context | configure service ies string subscriber-interface string group-interface string suppress-aa-sub boolean | |
| Tree | suppress-aa-sub | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tos-marking-state keyword
| Synopsis | TOS marking state | |
| Context | configure service ies string subscriber-interface string group-interface string tos-marking-state keyword | |
| Tree | tos-marking-state | |
| Options | ||
| Default | untrusted | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Group interface type | |
| Context | configure service ies string subscriber-interface string group-interface string type keyword | |
| Tree | type | |
| Options | ||
| Default | plain | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw
| Synopsis | Enter the wlan-gw context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw | |
| Tree | wlan-gw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WLAN Gateway | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gateway-address [address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the gateway-address list instance | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
| Max. Instances | 10 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Gateway endpoint address of the WLAN Gateway tunnel | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
purpose
| Synopsis | Enter the purpose context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) purpose | |
| Tree | purpose | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
xconnect boolean
| Synopsis | Use tunnel IP address for crosse-connect traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) purpose xconnect boolean | |
| Tree | xconnect | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gateway-router string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Routing instance the WLAN-GW endpoint resides in | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw gateway-router string | |
| Tree | gateway-router | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
group-encryption
| Synopsis | Enter the group-encryption context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw group-encryption | |
| Tree | group-encryption | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encryption-keygroup-inbound reference
| Synopsis | Encryption keygroup for inbound traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw group-encryption encryption-keygroup-inbound reference | |
| Tree | encryption-keygroup-inbound | |
Reference | configure group-encryption encryption-keygroup number | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encryption-keygroup-outbound reference
| Synopsis | Encryption keygroup for inbound traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw group-encryption encryption-keygroup-outbound reference | |
| Tree | encryption-keygroup-outbound | |
Reference | configure group-encryption encryption-keygroup number | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-ap
| Synopsis | Enter the l2-ap context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap | |
| Tree | l2-ap | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
access-point [sap-id] string
| Synopsis | Enter the access-point list instance | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap access-point string | |
| Tree | access-point | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID for the Layer 2 access point | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap access-point string | |
| Tree | access-point | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the L2 access points | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap access-point string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encap-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Service encapsulation type of this access point | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap access-point string encap-type keyword | |
| Tree | encap-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
epipe-sap-template reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Parameters template for the L2 access point SAP | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap access-point string epipe-sap-template reference | |
| Tree | epipe-sap-template | |
Reference | configure service template epipe-sap-template string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
auto-sub-id-fmt keyword
| Synopsis | Format of the auto-generated subscriber ID | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap auto-sub-id-fmt keyword | |
| Tree | auto-sub-id-fmt | |
| Options | ||
| Default | include-ap-tags | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-encap-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default encapsulation type for Layer 2 access points | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw l2-ap default-encap-type keyword | |
| Tree | default-encap-type | |
| Options | ||
| Default | null | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
lanext
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the lanext context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw lanext | |
| Tree | lanext | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-bd number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of bridge domains | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw lanext max-bd number | |
| Tree | max-bd | |
| Range | 1 to 131071 | |
| Default | 131071 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
learn-ap-mac
| Synopsis | Enable the learn-ap-mac context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw learn-ap-mac | |
| Tree | learn-ap-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
delay-auth boolean
| Synopsis | Delay AP-MAC until after ARP/ND authentication response | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw learn-ap-mac delay-auth boolean | |
| Tree | delay-auth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mobility
| Synopsis | Enter the mobility context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility | |
| Tree | mobility | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Minimum time between two mobility events for single UE | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility hold-time number | |
| Tree | hold-time | |
| Range | 0 to 255 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inter-tunnel-type boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable mobility between terminating tunnel types | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility inter-tunnel-type boolean | |
| Tree | inter-tunnel-type | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
inter-vlan boolean
| Synopsis | Allow mobility within different VLANs of the same range | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility inter-vlan boolean | |
| Tree | inter-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
trigger
| Synopsis | Enter the trigger context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility trigger | |
| Tree | trigger | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
control boolean
| Synopsis | Use control traffic as a mobility trigger | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility trigger control boolean | |
| Tree | control | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
data boolean
| Synopsis | Use data traffic as mobility trigger | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility trigger data boolean | |
| Tree | data | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
iapp boolean
| Synopsis | Use IAPP messages as a mobility trigger | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw mobility trigger iapp boolean | |
| Tree | iapp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
oper-down-on-group-degrade boolean
| Synopsis | Bring interface down when the ISA WLAN Gateway degraded | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw oper-down-on-group-degrade boolean | |
| Tree | oper-down-on-group-degrade | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp-mss-adjust number
| Synopsis | TCP Maximum Segment Size (MSS) adjustment for gateway | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tcp-mss-adjust number | |
| Tree | tcp-mss-adjust | |
| Range | 160 to 10240 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tunnel-egress-qos
| Synopsis | Enter the tunnel-egress-qos context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos | |
| Tree | tunnel-egress-qos | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of egress QoS for WLAN-GW tunnels | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
agg-rate-limit (number | keyword)
| Synopsis | HQoS aggregate rate limit | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos agg-rate-limit (number | keyword) | |
| Tree | agg-rate-limit | |
| Range | 1 to 100000000 | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
granularity keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Granularity of the egress shaping for WLAN Gateway | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos granularity keyword | |
| Tree | granularity | |
| Options | per-tunnel – Applied to each tunnel per-retailer – Applied to each retailer Mobile Network Operator's fraction of the tunnel payload | |
| Default | per-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
hold-time (number | keyword)
| Synopsis | Minimum time to hold egress shaping resources | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos hold-time (number | keyword) | |
| Tree | hold-time | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
multi-client-only boolean
| Synopsis | Allow shaping for tunnel traffic for multiple UEs | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos multi-client-only boolean | |
| Tree | multi-client-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qos reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress QoS policy linked with each interface tunnel | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos qos reference | |
| Tree | qos | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
scheduler-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress scheduler policy linked with each tunnel | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos scheduler-policy reference | |
| Tree | scheduler-policy | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
tunnel-encaps
| Synopsis | Enter the tunnel-encaps context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-encaps | |
| Tree | tunnel-encaps | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
learn-l2tp-cookie (keyword | hex-string)
| Synopsis | System that learns the cookie from L2TP tunnels terminating on this interface | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw tunnel-encaps learn-l2tp-cookie (keyword | hex-string) | |
| Tree | learn-l2tp-cookie | |
| String Length | 6 | |
| Options | never – Never interpret the cookie always – Interpret cookie regardless of first two octets value | |
| Default | never | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vlan-range [range] string
| Synopsis | Enter the vlan-range list instance | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string | |
| Tree | vlan-range | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[range] string
| Synopsis | IEEE 802.1q VLAN tag range | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string | |
| Tree | vlan-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication
| Synopsis | Enter the authentication context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication | |
| Tree | authentication | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Minimum time UE held down after failed authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication hold-time number | |
| Tree | hold-time | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
local
| Synopsis | Enable the local context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local | |
| Tree | local | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
coa-policy reference
| Synopsis | RADIUS ISA policy applied to CoA or disconnect messages | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local coa-policy reference | |
| Tree | coa-policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-ue-state keyword
| Synopsis | UE state accepted for immediate authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local default-ue-state keyword | |
| Tree | default-ue-state | |
| Options | portal – Portal redirect UE using the http-redirect-policy dsm – DSM UE using DSM parameters | |
Notes | This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
on-control-plane boolean
| Synopsis | Allow authentication on first control plane packet | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication on-control-plane boolean | |
| Tree | on-control-plane | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | RADIUS policy for authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication policy reference | |
| Tree | policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vlan-mismatch-timeout number
| Synopsis | Timeout if packet received with a non-matching VLAN tag | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string authentication vlan-mismatch-timeout number | |
| Tree | vlan-mismatch-timeout | |
| Range | 5 to 60 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
data-triggered-ue-creation
| Synopsis | Enter the data-triggered-ue-creation context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation | |
| Tree | data-triggered-ue-creation | |
Description | Commands in this context configure data-triggered subscriber creation for Wi-Fi subscribers. Data-triggered UE creation only works upon receipt of TCP and UDP packets. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of data-triggered UE creation | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
arp boolean
| Synopsis | Authenticate ARP packets received from an unknown UE | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation arp boolean | |
| Tree | arp | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
create-proxy-cache-entry
| Synopsis | Enter the create-proxy-cache-entry context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry | |
| Tree | create-proxy-cache-entry | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mac-format string
| Synopsis | MAC address format | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry mac-format string | |
| Tree | mac-format | |
| String Length | 2 to 7 | |
| Default | aa: | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enable the proxy-server context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
| Synopsis | RADIUS Proxy server name | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server name string | |
| Tree | name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Router instance of the RADIUS proxy server | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server router-instance string | |
| Tree | router-instance | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ospf boolean
| Synopsis | Authenticate OSPF packets received from an unknown UE | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation ospf boolean | |
| Tree | ospf | |
Description | When configured to true, the system triggers UE authentication based on OSPFv2 or OSPFv3 packets. These packets are used with the dynamic VPLS service. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp4
| Synopsis | Enter the dhcp4 context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 | |
| Tree | dhcp4 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv4 | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dns string
| Synopsis | DNS servers signaled in DHCP | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 dns string | |
| Tree | dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-aware-ip-address (ipv4-unicast-address | keyword)
| Synopsis | L2-Aware NAT inside IP address | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 l2-aware-ip-address (ipv4-unicast-address | keyword) | |
| Tree | l2-aware-ip-address | |
| Options | from-pool – IP address allocated from a pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Lease time an authenticated user | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Lease time for migrant user (unauthenticated) | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nbns string
| Synopsis | NetBIOS servers signaled in DHCP | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 nbns string | |
| Tree | nbns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
| Synopsis | Enter the dhcp6 context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 | |
| Tree | dhcp6 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the protocol | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime
| Synopsis | Enter the preferred-lifetime context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime | |
| Tree | preferred-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Preferred signaled lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Signaled preferred lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime
| Synopsis | Enter the valid-lifetime context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime | |
| Tree | valid-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Signaled valid lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Valid signaled lifetime UE is not fully authenticated | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dsm
| Synopsis | Enter the dsm context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm | |
| Tree | dsm | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA Radius Policy for accounting | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
accounting-update
| Synopsis | Enable the accounting-update context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-update | |
| Tree | accounting-update | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interim accounting update messages interval | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-update interval number | |
| Tree | interval | |
| Range | 5 to 259200 | |
| Units | minutes | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DSM | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
application-assurance
| Synopsis | Enter the application-assurance context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance | |
| Tree | application-assurance | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting-statistics boolean
| Synopsis | Collect AA statistics | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance accounting-statistics boolean | |
| Tree | accounting-statistics | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | AA application profile used for portal authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
url-parameter string
| Synopsis | AA URL parameter included for HTTP portal redirect | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance url-parameter string | |
| Tree | url-parameter | |
| String Length | 1 to 247 | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
| Synopsis | Enter the egress context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policer reference
| Synopsis | Policer for egress traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm egress policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-filter reference
| Synopsis | Filter for ingress traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress ip-filter reference | |
| Tree | ip-filter | |
Reference | configure subscriber-mgmt isa-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policer reference
| Synopsis | Policer for ingress traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
soft-quota-exhausted-filter reference
| Synopsis | Filter applied when soft volume quota is reached | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress soft-quota-exhausted-filter reference | |
| Tree | soft-quota-exhausted-filter | |
Description | This command applies a filter when a soft volume quota is reached. The filter replaces the currently applied filter (which can be preconfigured using the ip-filter command in the configure service vprn subscriber-interface group-interface wlan-gw vlan-range dsm ingress ip-filter context or be set using a RADIUS CoA message) for the UE upon quota exhaustion. If the quota is extended using a RADIUS CoA message, the filter is automatically reverted. Configuration changes apply only to new DSM UEs and not to existing UEs. | |
Reference | configure subscriber-mgmt isa-filter string | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
one-time-redirect
| Synopsis | Enter the one-time-redirect context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect | |
| Tree | one-time-redirect | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port number
| Synopsis | Destination port of packets for HTTP redirect | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect port number | |
| Tree | port | |
| Range | 1 to 65535 | |
| Default | 80 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
url string
| Synopsis | URL for redirected HTTP protocol packets | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect url string | |
| Tree | url | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
volume-quota-direction keyword
| Synopsis | Volume quota direction for WLAN GW | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dsm volume-quota-direction keyword | |
| Tree | volume-quota-direction | |
Description | This command specifies the direction that volume quotas are applied. Configuration changes apply only to new DSM UEs and not to existing UEs. | |
| Options | both – Both directions ingress – Ingress direction (upstream) egress – Egress direction (downstream) | |
| Default | both | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dynamic-service boolean
| Synopsis | Dynamically assign WLAN-GW subscriber to a VPLS service | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string dynamic-service boolean | |
| Tree | dynamic-service | |
Description | When configured to true, the WLAN-GW subscriber is dynamically assigned to a VPLS service, based on RADIUS authentication reply attributes. This feature is used in conjunction with the configure service vpls wlan-gw wlan-gw-group command. See "Dynamic VPLS service" in the 7450 ESS, 7750 SR, and VSR Triple Play Service Delivery Architecture Guide for more information about the dynamic VPLS service feature. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
extension [extension-range] string
| Synopsis | Add a list entry for extension | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string extension string | |
| Tree | extension | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[extension-range] string
| Synopsis | VLAN tag range used for matching | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string extension string | |
| Tree | extension | |
Description | This command configures the additional VLAN range that is used for matching. Any traffic within the extension range is considered part of the same VLAN range for purposes of intra-SSID mobility. | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
http-redirect-policy reference
| Synopsis | Default HTTP redirect policy for portal authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string http-redirect-policy reference | |
| Tree | http-redirect-policy | |
Reference | configure subscriber-mgmt http-redirect-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
idle-timeout-action keyword
| Synopsis | Action to perform when the idle timeout expires | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string idle-timeout-action keyword | |
| Tree | idle-timeout-action | |
| Options | ||
| Default | remove | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-service
| Synopsis | Enable the l2-service context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service | |
| Tree | l2-service | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Layer 2 service for VLAN range | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
service reference
| Synopsis | Layer 2 service associated with the range | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service service reference | |
| Tree | service | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
| Synopsis | NAT policy for DSM and ISA portal authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
retail-service string
| Synopsis | Default retail service for new UEs in this range | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string retail-service string | |
| Tree | retail-service | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
slaac
| Synopsis | Enter the slaac context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac | |
| Tree | slaac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the protocol | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime
| Synopsis | Enter the preferred-lifetime context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime | |
| Tree | preferred-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Preferred signaled lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Signaled preferred lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime
| Synopsis | Enter the valid-lifetime context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime | |
| Tree | valid-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Signaled valid lifetime after full authentication | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Valid signaled lifetime UE is not fully authenticated | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vrgw
| Synopsis | Enter the vrgw context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw | |
| Tree | vrgw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of vRGW | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
brg
| Synopsis | Enter the brg context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg | |
| Tree | brg | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authenticated-brg-only boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Only allow hosts from BRGs pre-authenticated using the radius-proxy | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg authenticated-brg-only boolean | |
| Tree | authenticated-brg-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
default-brg-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default BRG profile to use if the AAA server does not specify one | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg default-brg-profile reference | |
| Tree | default-brg-profile | |
Reference | configure subscriber-mgmt vrgw brg-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
lanext
| Synopsis | Enter the lanext context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext | |
| Tree | lanext | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
access
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the access context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access | |
| Tree | access | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-mac number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of allowed MAC entries on access side | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access max-mac number | |
| Tree | max-mac | |
| Range | 1 to 256 | |
| Default | 20 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
multi-access boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow multiple access points | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access multi-access boolean | |
| Tree | multi-access | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
policer reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Policer for ingress home traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 19.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of HLE | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
assistive-address-resolution boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA assists in address resolution | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext assistive-address-resolution boolean | |
| Tree | assistive-address-resolution | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
bd-mac-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Prefix of the HLE BD MAC address | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext bd-mac-prefix string | |
| Tree | bd-mac-prefix | |
| String Length | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
mac-translation boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow MAC address translation for HLE services | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext mac-translation boolean | |
| Tree | mac-translation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
network
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the network context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network | |
| Tree | network | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the HLE network | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-mac number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of allowed MAC entries on network side | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network max-mac number | |
| Tree | max-mac | |
| Range | 1 to 64 | |
| Default | 20 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
policer reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Policer for ingress data center traffic | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 19.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
xconnect
| Synopsis | Enter the xconnect context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect | |
| Tree | xconnect | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting
| Synopsis | Enter the accounting context | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting | |
| Tree | accounting | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mobility-updates boolean
| Synopsis | Accounting updates triggered by mobility | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting mobility-updates boolean | |
| Tree | mobility-updates | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA RADIUS accounting policy for cross-connected UEs | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting policy reference | |
| Tree | policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
update-interval number
| Synopsis | Time between successive interim accounting updates | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting update-interval number | |
| Tree | update-interval | |
| Range | 5 to 259200 | |
| Units | minutes | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the cross-connect | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ID of WLAN Gateway ISA group that gateway binds to | |
| Context | configure service ies string subscriber-interface string group-interface string wlan-gw wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
wpp
| Synopsis | Enable the wpp context | |
| Context | configure service ies string subscriber-interface string group-interface string wpp | |
| Tree | wpp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WPP | |
| Context | configure service ies string subscriber-interface string group-interface string wpp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
initial
| Synopsis | Enter the initial context | |
| Context | configure service ies string subscriber-interface string group-interface string wpp initial | |
| Tree | initial | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Initial application profile name | |
| Context | configure service ies string subscriber-interface string group-interface string wpp initial app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Initial SLA profile | |
| Context | configure service ies string subscriber-interface string group-interface string wpp initial sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Initial subscriber profile | |
| Context | configure service ies string subscriber-interface string group-interface string wpp initial sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time number
| Synopsis | Lease time | |
| Context | configure service ies string subscriber-interface string group-interface string wpp lease-time number | |
| Tree | lease-time | |
| Range | 10 to 315446399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
portal
| Synopsis | Enter the portal context | |
| Context | configure service ies string subscriber-interface string group-interface string wpp portal | |
| Tree | portal | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
name string
| Synopsis | Web portal server name | |
| Context | configure service ies string subscriber-interface string group-interface string wpp portal name string | |
| Tree | name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
portal-group reference
| Synopsis | WPP portal group for this interface | |
| Context | configure service ies string subscriber-interface string group-interface string wpp portal portal-group reference | |
| Tree | portal-group | |
Reference | configure aaa wpp portal-group string | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Virtual router instance of WPP portal for interface | |
| Context | configure service ies string subscriber-interface string group-interface string wpp portal router-instance string | |
| Tree | router-instance | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
restore-to-initial-on-disconnect boolean
| Synopsis | Restore initial profiles after a host has disconnected | |
| Context | configure service ies string subscriber-interface string group-interface string wpp restore-to-initial-on-disconnect boolean | |
| Tree | restore-to-initial-on-disconnect | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
triggered-hosts boolean
| Synopsis | Enable/disable triggered hosts | |
| Context | configure service ies string subscriber-interface string group-interface string wpp triggered-hosts boolean | |
| Tree | triggered-hosts | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | User database | |
| Context | configure service ies string subscriber-interface string group-interface string wpp user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service ies string subscriber-interface string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service ies string subscriber-interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service ies string subscriber-interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service ies string subscriber-interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ipv6
down
| Synopsis | Enter the down context | |
| Context | configure service ies string subscriber-interface string hold-time ipv6 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service ies string subscriber-interface string hold-time ipv6 down init-only boolean | |
| Tree | init-only | |
Description | When configured to true, the system applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service ies string subscriber-interface string hold-time ipv6 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ipoe-linking
| Synopsis | Enter the ipoe-linking context | |
| Context | configure service ies string subscriber-interface string ipoe-linking | |
| Tree | ipoe-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gratuitous-router-advertisement boolean
| Synopsis | Send unsolicited router advertisement after DHCP setup | |
| Context | configure service ies string subscriber-interface string ipoe-linking gratuitous-router-advertisement boolean | |
| Tree | gratuitous-router-advertisement | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session
| Synopsis | Enter the ipoe-session context | |
| Context | configure service ies string subscriber-interface string ipoe-session | |
| Tree | ipoe-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum number of sessions on this group interface | |
| Context | configure service ies string subscriber-interface string ipoe-session session-limit number | |
| Tree | session-limit | |
| Range | 1 to 500000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string subscriber-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address [ipv4-address] string
[ipv4-address] string
gateway string
holdup-time number
| Synopsis | Wait time before accepting new state attribute | |
| Context | configure service ies string subscriber-interface string ipv4 address string holdup-time number | |
| Tree | holdup-time | |
| Range | 100 to 5000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
populate-host-routes boolean
| Synopsis | Populate subscriber host routes in local FIB | |
| Context | configure service ies string subscriber-interface string ipv4 address string populate-host-routes boolean | |
| Tree | populate-host-routes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service ies string subscriber-interface string ipv4 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on this IP address | |
| Context | configure service ies string subscriber-interface string ipv4 address string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-unmatching-subnets boolean
| Synopsis | Allow subscriber hosts without a matching subnet | |
| Context | configure service ies string subscriber-interface string ipv4 allow-unmatching-subnets boolean | |
| Tree | allow-unmatching-subnets | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-dns string
| Synopsis | Default DNS server addresses | |
| Context | configure service ies string subscriber-interface string ipv4 default-dns string | |
| Tree | default-dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Enable PPPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 0 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id boolean
| Synopsis | Send SAP ID in the sub-option of the DHCP relay packet | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option sap-id boolean | |
| Tree | sap-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | User-defined ASCII string for the VSO | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option string string | |
| Tree | string | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
system-id boolean
| Synopsis | Send the system ID in the VSO | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option system-id boolean | |
| Tree | system-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
emulated-server string
| Synopsis | IP address used as DHCP server address in SAP context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | DHCP lease time | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-include-gi-address boolean
| Synopsis | Include the GI address in DHCP relay messages | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
virtual-subnet boolean
| Synopsis | Enable a virtual subnet for DHCPv4 hosts | |
| Context | configure service ies string subscriber-interface string ipv4 dhcp virtual-subnet boolean | |
| Tree | virtual-subnet | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
export-host-routes boolean
| Synopsis | Allow export of subscriber management host routes | |
| Context | configure service ies string subscriber-interface string ipv4 export-host-routes boolean | |
| Tree | export-host-routes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
unnumbered
| Synopsis | Enter the unnumbered context | |
| Context | configure service ies string subscriber-interface string ipv4 unnumbered | |
| Tree | unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IP address for the subscriber interface | |
| Context | configure service ies string subscriber-interface string ipv4 unnumbered ip-address string | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-int-name string
| Synopsis | Interface name from which an IPv4 addressed is borrowed | |
| Context | configure service ies string subscriber-interface string ipv4 unnumbered ip-int-name string | |
| Tree | ip-int-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enable the ipv6 context | |
| Context | configure service ies string subscriber-interface string ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address [ipv6-address] string
[ipv6-address] string
host-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Host type for subscriber interface prefixes | |
| Context | configure service ies string subscriber-interface string ipv6 address string host-type keyword | |
| Tree | host-type | |
| Options | pd – IPv6 ESM hosts for DHCPv6 prefix-delegation wan – ESM hosts for DHCPv6 addresses or by WAN interface pd-wan – Both prefix-delegation and ESM hosts | |
| Default | pd | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
prefix-length number
| Synopsis | IPv6 address prefix length | |
| Context | configure service ies string subscriber-interface string ipv6 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 128 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-multiple-wan-addresses boolean
| Synopsis | Allow multiple WAN addresses | |
| Context | configure service ies string subscriber-interface string ipv6 allow-multiple-wan-addresses boolean | |
| Tree | allow-multiple-wan-addresses | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-unmatching-prefixes boolean
| Synopsis | Allow subscriber hosts without a matching prefix | |
| Context | configure service ies string subscriber-interface string ipv6 allow-unmatching-prefixes boolean | |
| Tree | allow-unmatching-prefixes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-dns string
| Synopsis | Default DNS server addresses | |
| Context | configure service ies string subscriber-interface string ipv6 default-dns string | |
| Tree | default-dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
delegated-prefix-length (number | keyword)
| Synopsis | IPv6 delegated prefix length | |
| Context | configure service ies string subscriber-interface string ipv6 delegated-prefix-length (number | keyword) | |
| Tree | delegated-prefix-length | |
| Range | 48 to 64 | |
| Options | ||
| Default | 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
override-slaac boolean
| Synopsis | Allow WAN address offered by DHCP to overwrite the WAN address acquired from SLAAC | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 override-slaac boolean | |
| Tree | override-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pd-managed-route
| Synopsis | Enable the pd-managed-route context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 pd-managed-route | |
| Tree | pd-managed-route | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
next-hop keyword
| Synopsis | Next hop type | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 pd-managed-route next-hop keyword | |
| Tree | next-hop | |
| Options | ||
| Default | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 proxy server | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for prefix to remain preferred on this interface | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rebind-timer number
| Synopsis | Rebind timer (T2) for this interface | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server rebind-timer number | |
| Tree | rebind-timer | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-timer number
| Synopsis | Renew timer (T1) | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server renew-timer number | |
| Tree | renew-timer | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server-id
| Synopsis | Enter the server-id context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server server-id | |
| Tree | server-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-ascii string
| Synopsis | Vendor-assigned ID based on Enterprise Number (DUID-EN) | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-en-ascii string | |
| Tree | duid-en-ascii | |
| String Length | 1 to 58 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-hex string
| Synopsis | DUID system ID in hexadecimal format | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-en-hex string | |
| Tree | duid-en-hex | |
| String Length | 1 to 118 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-ll
| Synopsis | Use link-layer address (DUID-LL) as DUID | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-ll | |
| Tree | duid-ll | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for prefix to remain valid on this interface | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 proxy-server valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-split
| Synopsis | Enter the lease-split context | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay lease-split | |
| Tree | lease-split | |
Description | Commands in this context configure DHCPv6 lease split. DHCPv6 lease split is active when administratively enabled and for all IA_NA and IA_PD options in the transaction, the configured lease split valid lifetime (short lease time) is less than or equal to one of the following:
| |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 lease split | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay lease-split admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | DHCPv6 lease split valid lifetime (short lease time) | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay lease-split valid-lifetime number | |
| Tree | valid-lifetime | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | Link address for the DHCPv6 relay messages | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | DHCP6 server(s) to which the DHCP6 requests are forwarded | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-address string
| Synopsis | Source IPv6 address for the DHCPv6 relay messages | |
| Context | configure service ies string subscriber-interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-bridged-mode boolean
| Synopsis | Enable IPv6 IPoE bridged mode | |
| Context | configure service ies string subscriber-interface string ipv6 ipoe-bridged-mode boolean | |
| Tree | ipoe-bridged-mode | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-local-address
| Synopsis | Enter the link-local-address context | |
| Context | configure service ies string subscriber-interface string ipv6 link-local-address | |
| Tree | link-local-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | IPv6 link local address | |
| Context | configure service ies string subscriber-interface string ipv6 link-local-address address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix [ipv6-prefix] string
[ipv6-prefix] string
holdup-time number
| Synopsis | Time to wait before route accepts new state attribute | |
| Context | configure service ies string subscriber-interface string ipv6 prefix string holdup-time number | |
| Tree | holdup-time | |
| Range | 100 to 5000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Host type for subscriber interface prefixes | |
| Context | configure service ies string subscriber-interface string ipv6 prefix string host-type keyword | |
| Tree | host-type | |
| Options | pd – IPv6 ESM hosts for DHCPv6 prefix-delegation wan – ESM hosts for DHCPv6 addresses or by WAN interface pd-wan – Both prefix-delegation and ESM hosts | |
| Default | pd | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on this IP address | |
| Context | configure service ies string subscriber-interface string ipv6 prefix string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-advertisements
| Synopsis | Enter the router-advertisements context | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements | |
| Tree | router-advertisements | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router advertisements | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-mcast keyword
| Synopsis | Protocol with forced multicast | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements force-mcast keyword | |
| Tree | force-mcast | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-advertisement-interval number
| Synopsis | Maximum advertisement interval | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 900 to 1800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-advertisement-interval number
| Synopsis | Minimum advertisement interval | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 900 to 1350 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
| Synopsis | Enter the options context | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options | |
| Tree | options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
current-hop-limit number
| Synopsis | Hop limit to be advertised | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options current-hop-limit number | |
| Tree | current-hop-limit | |
| Range | 0 to 255 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dns
| Synopsis | Enter the dns context | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options dns | |
| Tree | dns | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
include-rdnss boolean
| Synopsis | Include the RDNSS server option 25 | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options dns include-rdnss boolean | |
| Tree | include-rdnss | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rdnss-lifetime (number | keyword)
| Synopsis | Maximum time for the RDNSS address to remain valid | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options dns rdnss-lifetime (number | keyword) | |
| Tree | rdnss-lifetime | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-configuration boolean
| Synopsis | Managed address configuration flag | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options managed-configuration boolean | |
| Tree | managed-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mtu (number | keyword)
| Synopsis | Advertised MTU value | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options mtu (number | keyword) | |
| Tree | mtu | |
| Range | 1280 to 9212 | |
| Units | bytes | |
| Options | ||
| Default | not-included | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
other-stateful-configuration boolean
| Synopsis | Other stateful configuration flag | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options other-stateful-configuration boolean | |
| Tree | other-stateful-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reachable-time number
| Synopsis | Reachable time for advertisements | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retransmit-timer number
| Synopsis | Retransmit time in router advertisements from interface | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options retransmit-timer number | |
| Tree | retransmit-timer | |
| Range | 0 to 1800000 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-lifetime (number | keyword)
| Synopsis | Router lifetime | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements options router-lifetime (number | keyword) | |
| Tree | router-lifetime | |
| Range | 2700 to 9000 | |
| Units | seconds | |
| Options | ||
| Default | 4500 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-options
| Synopsis | Enter the prefix-options context | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements prefix-options | |
| Tree | prefix-options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
autonomous boolean
| Synopsis | Value of the autonomous flag | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements prefix-options autonomous boolean | |
| Tree | autonomous | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
on-link boolean
| Synopsis | Assign the prefix to an interface on the specified link | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements prefix-options on-link boolean | |
| Tree | on-link | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain preferred | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements prefix-options preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain valid | |
| Context | configure service ies string subscriber-interface string ipv6 router-advertisements prefix-options valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicit
| Synopsis | Enter the router-solicit context | |
| Context | configure service ies string subscriber-interface string ipv6 router-solicit | |
| Tree | router-solicit | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
inactivity-timer (number | keyword)
| Synopsis | Time before an inactive host is removed | |
| Context | configure service ies string subscriber-interface string ipv6 router-solicit inactivity-timer (number | keyword) | |
| Tree | inactivity-timer | |
| Range | 1 to 31536000 | |
| Units | seconds | |
| Options | ||
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-address-assignment
| Synopsis | Enter the local-address-assignment context | |
| Context | configure service ies string subscriber-interface string local-address-assignment | |
| Tree | local-address-assignment | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Local Address Assignment | |
| Context | configure service ies string subscriber-interface string local-address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv4 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Request local addresses for PPP IPCP hosts | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv4 client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-pool string
| Synopsis | Default pools | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv4 default-pool string | |
| Tree | default-pool | |
| String Length | 1 to 32 | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv4 server for local pools management | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv4 server reference | |
| Tree | server | |
Reference | configure router string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enter the ipv6 context | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-slaac boolean
| Synopsis | Request local addresses for IPoE SLAAC hosts | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 client-applications ipoe-slaac boolean | |
| Tree | ipoe-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-wan boolean
| Synopsis | Request local addresses for IPoE IA NA hosts | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 client-applications ipoe-wan boolean | |
| Tree | ipoe-wan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp-slaac boolean
| Synopsis | Request local addresses for PPP SLAAC hosts | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 client-applications ppp-slaac boolean | |
| Tree | ppp-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv6 server for local pools management | |
| Context | configure service ies string subscriber-interface string local-address-assignment ipv6 server reference | |
| Tree | server | |
Reference | configure router string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe
| Synopsis | Enter the pppoe context | |
| Context | configure service ies string subscriber-interface string pppoe | |
| Tree | pppoe | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service ies string subscriber-interface string pppoe description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum PPPoE sessions | |
| Context | configure service ies string subscriber-interface string pppoe session-limit number | |
| Tree | session-limit | |
| Range | 1 to 333823 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
wan-mode keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Mode of operation for hosts with /128 WAN IPv6 address | |
| Context | configure service ies string subscriber-interface string wan-mode keyword | |
| Tree | wan-mode | |
| Options | ||
| Default | mode64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw
| Synopsis | Enable the wlan-gw context | |
| Context | configure service ies string subscriber-interface string wlan-gw | |
| Tree | wlan-gw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-manager
| Synopsis | Enter the pool-manager context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager | |
| Tree | pool-manager | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp6-client
| Synopsis | Enter the dhcp6-client context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client | |
| Tree | dhcp6-client | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcpv4-nat
| Synopsis | Enter the dhcpv4-nat context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat | |
| Tree | dhcpv4-nat | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ia-na
| Synopsis | Enter the ia-na context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na | |
| Tree | ia-na | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lease-query
| Synopsis | Enable the lease-query context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client lease-query | |
| Tree | lease-query | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max-retries number
| Synopsis | Retries before lease query assumes no allocated subnets | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client lease-query max-retries number | |
| Tree | max-retries | |
| Range | 0 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
servers string
| Synopsis | DHCPv6 servers that are used for requesting addresses | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client servers string | |
| Tree | servers | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
slaac
| Synopsis | Enter the slaac context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac | |
| Tree | slaac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
source-ip (keyword | ipv6-address)
| Synopsis | Source IP address that is used by the DHCPv6 client | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager dhcp6-client source-ip (keyword | ipv6-address) | |
| Tree | source-ip | |
| Options | ||
| Default | use-interface-ip | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enter the watermarks context | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager watermarks | |
| Tree | watermarks | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark when new prefix is allocated | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager watermarks high number | |
| Tree | high | |
| Range | 51 to 99 | |
| Default | 95 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark when unused prefix is released | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager watermarks low number | |
| Tree | low | |
| Range | 50 to 98 | |
| Default | 90 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
| Synopsis | ID of WLAN gateway group where prefixes are installed | |
| Context | configure service ies string subscriber-interface string wlan-gw pool-manager wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
redundancy
| Synopsis | Enter the redundancy context | |
| Context | configure service ies string subscriber-interface string wlan-gw redundancy | |
| Tree | redundancy | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WLAN-GW redundancy | |
| Context | configure service ies string subscriber-interface string wlan-gw redundancy admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
export string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Route to export to peer | |
| Context | configure service ies string subscriber-interface string wlan-gw redundancy export string | |
| Tree | export | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
monitor string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Peer route to monitor | |
| Context | configure service ies string subscriber-interface string wlan-gw redundancy monitor string | |
| Tree | monitor | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
subscriber-mgmt
| Synopsis | Enter the subscriber-mgmt context | |
| Context | configure service ies string subscriber-mgmt | |
| Tree | subscriber-mgmt | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multi-chassis-shunt-id number
| Synopsis | Shunt ID for a pair of resilient nodes | |
| Context | configure service ies string subscriber-mgmt multi-chassis-shunt-id number | |
| Tree | multi-chassis-shunt-id | |
Description | This command configures the shunt ID that is used to shunt downstream traffic from a standby node to an active node. Because this ID identifies the traffic service on the standby node, the same ID must be configured per service on each node. This configuration is required for BNG CUPS inter-UPF resiliency shunting, but not for non-BNG CUPS shunting. However, when configured, it is also used for shunting non-BNG CUPS sessions in the same service. | |
| Range | 1 to 8191 | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
up-resiliency
| Synopsis | Enter the up-resiliency context | |
| Context | configure service ies string subscriber-mgmt up-resiliency | |
| Tree | up-resiliency | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
monitor-oper-group [oper-group] reference
| Synopsis | Enter the monitor-oper-group list instance | |
| Context | configure service ies string subscriber-mgmt up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | Commands in this context define parameters to derive the service health based on monitored operational groups. The BNG UPF sends the health value to the BNG CPF. The BNG CPF uses the value to determine the need for a BNG UPF status change (active or standby). Note: The following is only applicable for the configure service vpls capture-sap context.If the configured groups are not the same for all capture SAPs sharing the same underlying port or LAG, the configuration of a Layer 2 access ID alias is required, or else the system chooses arbitrarily one set of configured groups. | |
| Max. Instances | 2 | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[oper-group] reference
| Synopsis | Operational group name | |
| Context | configure service ies string subscriber-mgmt up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | This element is part of a list key. | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
health-drop number
| Synopsis | Number subtracted from the health value per failure | |
| Context | configure service ies string subscriber-mgmt up-resiliency monitor-oper-group reference health-drop number | |
| Tree | health-drop | |
Description | This command configures the drop in the health value for every operational group member failure. Every failure of an operational group member decreases the base health value to a possible minimum of 0. | |
| Range | 1 to 255 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
video-interface [interface-name] string
| Synopsis | Enter the video-interface list instance | |
| Context | configure service ies string video-interface string | |
| Tree | video-interface | |
| Max. Instances | 9 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[interface-name] string
| Synopsis | Video interface name | |
| Context | configure service ies string video-interface string | |
| Tree | video-interface | |
| String Length | 1 to 29 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
accounting-policy reference
| Synopsis | Accounting Policy | |
| Context | configure service ies string video-interface string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
address [ip-address] string
| Synopsis | Add a list entry for address | |
| Context | configure service ies string video-interface string address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[ip-address] string
| Synopsis | IPv4 address for the video interface within the service | |
| Context | configure service ies string video-interface string address string | |
| Tree | address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
admin-state keyword
| Synopsis | Administrative state of the video interface | |
| Context | configure service ies string video-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
channel [mcast-address] string source string
[mcast-address] string
source string
channel-name string
| Synopsis | Channel name | |
| Context | configure service ies string video-interface string channel string source string channel-name string | |
| Tree | channel-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
description string
| Synopsis | Text description | |
| Context | configure service ies string video-interface string channel string source string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
scte35-action keyword
| Synopsis | Enable downstream forwarding of SCTE 35 cue avails | |
| Context | configure service ies string video-interface string channel string source string scte35-action keyword | |
| Tree | scte35-action | |
| Options | ||
| Default | forward | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
zone-channel [zone-mcast-address] string zone-source string
| Synopsis | Enter the zone-channel list instance | |
| Context | configure service ies string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[zone-mcast-address] string
| Synopsis | Multicast zone channel address | |
| Context | configure service ies string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
zone-source string
| Synopsis | Unicast source address | |
| Context | configure service ies string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
adi-channel-name string
| Synopsis | Zone channel name | |
| Context | configure service ies string video-interface string channel string source string zone-channel string zone-source string adi-channel-name string | |
| Tree | adi-channel-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
cpu-protection reference
| Synopsis | CPU protection policy | |
| Context | configure service ies string video-interface string cpu-protection reference | |
| Tree | cpu-protection | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
description string
| Synopsis | Text description | |
| Context | configure service ies string video-interface string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
multicast-service number
| Synopsis | Associated multicast service ID | |
| Context | configure service ies string video-interface string multicast-service number | |
| Tree | multicast-service | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
output-format keyword
| Synopsis | Output format | |
| Context | configure service ies string video-interface string output-format keyword | |
| Tree | output-format | |
| Options | ||
| Default | rtp-udp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
video-sap
| Synopsis | Enable the video-sap context | |
| Context | configure service ies string video-interface string video-sap | |
| Tree | video-sap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
egress
filter
ip reference
qos
policy-name reference
| Synopsis | SAP egress QoS policy ID | |
| Context | configure service ies string video-interface string video-sap egress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
ingress
filter
ip reference
qos
policy-name reference
| Synopsis | SAP ingress QoS policy ID | |
| Context | configure service ies string video-interface string video-sap ingress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
video-group-id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Video group ID | |
| Context | configure service ies string video-interface string video-sap video-group-id reference | |
| Tree | video-group-id | |
Reference | configure isa video-group number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s | |
vpn-id number
ipfix
export-policy [name] string
| Synopsis | Enter the export-policy list instance | |
| Context | configure service ipfix export-policy string | |
| Tree | export-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] string
| Synopsis | IPFIX policy name | |
| Context | configure service ipfix export-policy string | |
| Tree | export-policy | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
collector router-instance string ip-address string
| Synopsis | Enter the collector list instance | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
| Introduced | 16.0.R1 | |
Platforms | All |
router-instance string
| Synopsis | Router where the collector is reached | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
ip-address string
| Synopsis | IPv4 address of the external collector node | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the collector | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum Transmission Unit | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string mtu number | |
| Tree | mtu | |
| Range | 512 to 9212 | |
| Units | octets | |
| Default | 1500 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
refresh-timeout number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPFIX template refresh time | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string refresh-timeout number | |
| Tree | refresh-timeout | |
| Range | 240 to 86400 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
source-ip-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Source IP address from which UDP streams are sent | |
| Context | configure service ipfix export-policy string collector router-instance string ip-address string source-ip-address string | |
| Tree | source-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
description string
| Synopsis | Text description | |
| Context | configure service ipfix export-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
template-format keyword
| Synopsis | Template format used by this IPFIX export policy | |
| Context | configure service ipfix export-policy string template-format keyword | |
| Tree | template-format | |
| Options | ||
| Default | format1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipipe [service-name] string
[service-name] string
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service ipipe string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | All |
ce-address-discovery
| Synopsis | Enable the ce-address-discovery context | |
| Context | configure service ipipe string ce-address-discovery | |
| Tree | ce-address-discovery | |
| Introduced | 20.10.R1 | |
Platforms | All |
customer reference
description string
| Synopsis | Text description | |
| Context | configure service ipipe string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | All |
endpoint [name] string
[name] string
description string
| Synopsis | Text description | |
| Context | configure service ipipe string endpoint string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | All |
hold-time-active number
| Synopsis | Time before entering standby when MC-LAG SAP goes down | |
| Context | configure service ipipe string endpoint string hold-time-active number | |
| Tree | hold-time-active | |
| Range | 1 to 60 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
All |
revert-time (number | keyword)
| Synopsis | Time to wait before reverting to primary spoke SDP | |
| Context | configure service ipipe string endpoint string revert-time (number | keyword) | |
| Tree | revert-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Options | ||
| Default | immediate | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
standby-signaling keyword
| Synopsis | Endpoint behavior for status of sending PW standby bit | |
| Context | configure service ipipe string endpoint string standby-signaling keyword | |
| Tree | standby-signaling | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | All |
sap [sap-id] string
[sap-id] string
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service ipipe string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 20.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service ipipe string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 20.10.R1 | |
Platforms | All |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service ipipe string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth number
ce-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the CE device | |
| Context | configure service ipipe string sap string ce-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ce-address | |
| Introduced | 20.10.R1 | |
Platforms | All |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service ipipe string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service ipipe string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service ipipe string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service ipipe string sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service ipipe string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 20.10.R1 | |
Platforms | All |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service ipipe string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 20.10.R1 | |
Platforms | All |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service ipipe string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service ipipe string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service ipipe string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
rate number
filter
ip reference
ipv6 reference
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ipipe string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service ipipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service ipipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service ipipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service ipipe string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ipipe string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service ipipe string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service ipipe string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 20.10.R1 | |
Platforms | All |
overrides
hs-secondary-shaper string
| Synopsis | HS Secondary Shaper | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-secondary-shaper string | |
| Tree | hs-secondary-shaper | |
| String Length | 1 to 32 | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] reference
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] reference
| Synopsis | HS WRR group identifier | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
Reference | configure qos sap-egress string hs-wrr-group number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Class weight override of the WRR group | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-wrr-group reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Percent rate override applied to the HS WRR group | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-wrr-group reference percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Scheduling rate override applied to the HS WRR group | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides hs-wrr-group reference rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
|
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 20.10.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
All |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | All |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 20.10.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ipipe string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service ipipe string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 20.10.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service ipipe string sap string egress qos sap-egress port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the queue group redirect list policy | |
| Context | configure service ipipe string sap string egress qos sap-egress port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | All |
instance number
| Synopsis | Instance of port queue group | |
| Context | configure service ipipe string sap string egress qos sap-egress port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ipipe string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 20.10.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service ipipe string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service ipipe string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ipipe string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 20.10.R1 | |
Platforms | All |
endpoint reference
ingress
filter
ip reference
ipv6 reference
qos
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service ipipe string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
All |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service ipipe string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 20.10.R1 | |
Platforms | All |
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | All |
group-name reference
| Synopsis | Queue group template name created on forwarding plane | |
| Context | configure service ipipe string sap string ingress qos sap-ingress fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance | |
| Context | configure service ipipe string sap string ingress qos sap-ingress fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
overrides
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | All |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service ipipe string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service ipipe string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 20.10.R1 | |
Platforms | All |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service ipipe string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service ipipe string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 20.10.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service ipipe string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service ipipe string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service ipipe string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 20.10.R1 | |
Platforms | All |
lag
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service ipipe string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service ipipe string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 20.10.R1 | |
Platforms | All |
class number
weight number
mac string
mac-refresh number
| Synopsis | MAC refresh interval | |
| Context | configure service ipipe string sap string mac-refresh number | |
| Tree | mac-refresh | |
| Range | 0 to 65535 | |
| Default | 14400 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service ipipe string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 20.10.R1 | |
Platforms | All |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service ipipe string sap string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service ipipe string sap string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
use-broadcast-mac boolean
| Synopsis | Allow broadcast MAC on SAP | |
| Context | configure service ipipe string sap string use-broadcast-mac boolean | |
| Tree | use-broadcast-mac | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service ipipe string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 20.10.R1 | |
Platforms | All | |
service-mtu number
| Synopsis | MTU size | |
| Context | configure service ipipe string service-mtu number | |
| Tree | service-mtu | |
Description | This command configures the Maximum Transmission Unit (MTU) value (payload) for the service. The system uses the value to validate the operational state of the SAP and SDP binding within the service. The value overrides the default MTU for the service type. The service MTU and a SAP’s service delineation encapsulation overhead (4 bytes for a dot1q tag) are used to derive the required MTU of the physical port or channel on which the SAP was created. If the required payload is larger than the port or channel MTU, the SAP is placed in an inoperative state. If the required MTU is equal to or less than the port or channel MTU, the SAP transitions to the operative state. When binding an SDP to a service, the service MTU is compared to the path MTU associated with the SDP. The path MTU can be administratively defined in the context of the SDP. The default or administrative path MTU can be dynamically reduced due to the MTU capabilities discovered by the tunneling mechanism of the SDP or the egress interface MTU capabilities based on the next hop in the tunnel path. If the service MTU is larger than the path MTU, the SDP binding for the service is placed in an inoperative state. If the service MTU is equal to or less than the path MTU, the SDP binding is placed in an operational state. If a service MTU, port or channel MTU, or path MTU is dynamically or administratively modified, all associated SAP and SDP binding operational states are automatically reevaluated. Binding operational states are automatically reevaluated. For I-VPLS and Epipes bound to a B-VPLS, the service MTU must be at least 18 bytes smaller than the B-VPLS service MTU to accommodate the PBB header. Because this connects a Layer 2 to a Layer 3 service, adjust the service MTU under the Epipe service. The MTU that is advertised from the Epipe side is service MTU minus EtherHeaderSize. In the configure service epipe spoke-sdp context, the adv-service-mtu command can be used to override the configured MTU value used in T-LDP signaling to the far-end of an Epipe spoke-sdp. The adv-service-mtu command is also used to validate the value signaled by the far-end PE. | |
| Range | 1 to 9194 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
aarp
id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | AARP instance ID | |
| Context | configure service ipipe string spoke-sdp string aarp id reference | |
| Tree | id | |
Reference | configure application-assurance aarp number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Role of the spoke SDP referenced by the AARP | |
| Context | configure service ipipe string spoke-sdp string aarp type keyword | |
| Tree | type | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service ipipe string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 20.10.R1 | |
Platforms | All |
app-profile reference
| Synopsis | Application profile name for this SDP | |
| Context | configure service ipipe string spoke-sdp string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth (number | keyword)
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service ipipe string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service ipipe string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
ce-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the CE device | |
| Context | configure service ipipe string spoke-sdp string ce-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ce-address | |
| Introduced | 20.10.R1 | |
Platforms | All |
control-word boolean
| Synopsis | Use control word as part of packet encapsulation | |
| Context | configure service ipipe string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service ipipe string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | All |
egress
filter
ip reference
ipv6 reference
qos
network
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service ipipe string spoke-sdp string egress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service ipipe string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service ipipe string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service ipipe string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 20.10.R1 | |
Platforms | All | |
endpoint
name reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Endpoint name to which SDP bind is attached | |
| Context | configure service ipipe string spoke-sdp string endpoint name reference | |
| Tree | name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | All | |
precedence (number | keyword)
| Synopsis | Precedence when multiple SDP binds are on one endpoint | |
| Context | configure service ipipe string spoke-sdp string endpoint precedence (number | keyword) | |
| Tree | precedence | |
| Range | 1 to 4 | |
| Options | ||
| Default | 4 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service ipipe string spoke-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 20.10.R1 | |
Platforms | All |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service ipipe string spoke-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 20.10.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service ipipe string spoke-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 20.10.R1 | |
Platforms | All |
ingress
filter
ip reference
ipv6 reference
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service ipipe string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 20.10.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service ipipe string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 20.10.R1 | |
Platforms | All |
instance number
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service ipipe string spoke-sdp string ingress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 20.10.R1 | |
Platforms | All |
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service ipipe string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 20.10.R1 | |
Platforms | All | |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service ipipe string spoke-sdp string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service ipipe string spoke-sdp string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vc-switching boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Use PW switching signaling for spoke SDPs in service | |
| Context | configure service ipipe string vc-switching boolean | |
| Tree | vc-switching | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All | |
vpn-id number
mac-list [name] string
| Synopsis | Enter the mac-list list instance | |
| Context | configure service mac-list string | |
| Tree | mac-list | |
Description | Commands in this context specify the MAC addresses to be included in a MAC list to be used with the Auto-Learn MAC Protect (ALMP) functionality. The list is used to exclude certain MAC addresses from protection, for example, on SAPs or spoke SDPs configured with ALMP where certain MAC addresses (such as VRRP virtual MAC addresses) must be able to move to other objects. | |
| Introduced | 20.5.R1 | |
Platforms | All |
[name] string
description string
| Synopsis | Text description | |
| Context | configure service mac-list string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.5.R1 | |
Platforms | All |
mac [address] string
[address] string
mask string
md-auto-id
| Synopsis | Enter the md-auto-id context | |
| Context | configure service md-auto-id | |
| Tree | md-auto-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
customer-id-range
| Synopsis | Enable the customer-id-range context | |
| Context | configure service md-auto-id customer-id-range | |
| Tree | customer-id-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Upper bound of the ID range | |
| Context | configure service md-auto-id customer-id-range end number | |
| Tree | end | |
| Range | 2 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
start number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Lower bound of the ID range | |
| Context | configure service md-auto-id customer-id-range start number | |
| Tree | start | |
| Range | 2 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
pw-template-id-range
| Synopsis | Enable the pw-template-id-range context | |
| Context | configure service md-auto-id pw-template-id-range | |
| Tree | pw-template-id-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Upper bound of the PW template ID range | |
| Context | configure service md-auto-id pw-template-id-range end number | |
| Tree | end | |
| Range | 1 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
start number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Lower bound of the PW template ID range | |
| Context | configure service md-auto-id pw-template-id-range start number | |
| Tree | start | |
| Range | 1 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-id-range
| Synopsis | Enable the service-id-range context | |
| Context | configure service md-auto-id service-id-range | |
| Tree | service-id-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Upper bound of the service ID range | |
| Context | configure service md-auto-id service-id-range end number | |
| Tree | end | |
| Range | 1 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
start number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Lower bound of the service ID range | |
| Context | configure service md-auto-id service-id-range start number | |
| Tree | start | |
| Range | 1 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mrp
policy [policy-name] string
[policy-name] string
default-action keyword
| Synopsis | Action for packets not matching any MRP policy entries | |
| Context | configure service mrp policy string default-action keyword | |
| Tree | default-action | |
| Options | ||
| Default | allow | |
| Introduced | 20.10.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service mrp policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
action keyword
description string
| Synopsis | Text description | |
| Context | configure service mrp policy string entry number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | All |
match
isid [value] number
[value] number
higher-value number
| Synopsis | Highest service instance ID to match the entry | |
| Context | configure service mrp policy string entry number match isid number higher-value number | |
| Tree | higher-value | |
| Range | 0 to 16777215 | |
| Introduced | 20.10.R1 | |
Platforms | All |
scope keyword
nat
classifier [name] string
| Synopsis | Enter the classifier list instance | |
| Context | configure service nat classifier string | |
| Tree | classifier | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | NAT classifier name | |
| Context | configure service nat classifier string | |
| Tree | classifier | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default
| Synopsis | Enter the default context | |
| Context | configure service nat classifier string default | |
| Tree | default | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
action
destination-nat
| Synopsis | Enable the destination-nat context | |
| Context | configure service nat classifier string default action destination-nat | |
| Tree | destination-nat | |
Notes | The following elements are part of a choice: (destination-nat, dnat, and dnat-ip-address) or forward. | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | Substitute destination IP address of matching packets | |
| Context | configure service nat classifier string default action destination-nat ip-address string | |
| Tree | ip-address | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
forward
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Forward mode of operation | |
| Context | configure service nat classifier string default action forward | |
| Tree | forward | |
Notes | The following elements are part of a choice: (destination-nat, dnat, and dnat-ip-address) or forward. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dnat-ip-address string
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Default destination IP address for matching entries with dNAT action | |
| Context | configure service nat classifier string default dnat-ip-address string | |
| Tree | dnat-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service nat classifier string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
entry [id] number
| Synopsis | Enter the entry list instance | |
| Context | configure service nat classifier string entry number | |
| Tree | entry | |
| Max. Instances | 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[id] number
| Synopsis | Classifier rule entry ID | |
| Context | configure service nat classifier string entry number | |
| Tree | entry | |
| Range | 1 to 1000 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
action
destination-nat
| Synopsis | Enable the destination-nat context | |
| Context | configure service nat classifier string entry number action destination-nat | |
| Tree | destination-nat | |
Notes | The following elements are part of a choice: (destination-nat, dnat, and dnat-ip-address) or forward. | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | Replacement destination IP address for packets | |
| Context | configure service nat classifier string entry number action destination-nat ip-address string | |
| Tree | ip-address | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
forward
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Forward mode of operation | |
| Context | configure service nat classifier string entry number action forward | |
| Tree | forward | |
Notes | The following elements are part of a choice: (destination-nat, dnat, and dnat-ip-address) or forward. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service nat classifier string entry number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
match
dst-port-range
| Synopsis | Enter the dst-port-range context | |
| Context | configure service nat classifier string entry number match dst-port-range | |
| Tree | dst-port-range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
end number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Upper bound of the port range | |
| Context | configure service nat classifier string entry number match dst-port-range end number | |
| Tree | end | |
| Range | 0 | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
start number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Lower bound of the port range | |
| Context | configure service nat classifier string entry number match dst-port-range start number | |
| Tree | start | |
| Range | 0 | 1 to 65535 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
foreign-ip-address string
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Foreign IP address as the match criterion | |
| Context | configure service nat classifier string entry number match foreign-ip-address string | |
| Tree | foreign-ip-address | |
| Introduced | 19.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
protocol keyword
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | IP protocol to match | |
| Context | configure service nat classifier string entry number match protocol keyword | |
| Tree | protocol | |
| Options | ||
| Default | udp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
deterministic-script
| Synopsis | Enter the deterministic-script context | |
| Context | configure service nat deterministic-script | |
| Tree | deterministic-script | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
location string
| Synopsis | Remote location where Python script is exported | |
| Context | configure service nat deterministic-script location string | |
| Tree | location | |
| String Length | 1 to 180 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
firewall-policy [name] string
| Synopsis | Enter the firewall-policy list instance | |
| Context | configure service nat firewall-policy string | |
| Tree | firewall-policy | |
Description | Commands in this context configure the attributes of the firewall policy, for use in contexts where basic protection from outside attack vectors is required. Firewall policies cannot be deleted if they are in use. | |
| Max. Instances | 2048 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | Firewall policy name | |
| Context | configure service nat firewall-policy string | |
| Tree | firewall-policy | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
alg
| Synopsis | Enter the alg context | |
| Context | configure service nat firewall-policy string alg | |
| Tree | alg | |
Description | Commands in this context configure the Application Layer Gateway (ALG) attributes of the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ftp boolean
rtsp boolean
sip boolean
description string
| Synopsis | Text description | |
| Context | configure service nat firewall-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
domain
| Synopsis | Enter the domain context | |
| Context | configure service nat firewall-policy string domain | |
| Tree | domain | |
Description | Commands in this context configure the attributes of the domain for the firewall policy. All associated traffic must be part of the prefixes specified by this domain. | |
Notes | The following elements are part of a choice: domain or l2-outside. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
router-instance string
| Synopsis | Router or VPRN service name | |
| Context | configure service nat firewall-policy string domain router-instance string | |
| Tree | router-instance | |
Description | This command specifies the router instance or VPRN service for this domain. All associated traffic must be part of the prefixes specified by this domain. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
filtering keyword
| Synopsis | Filtering method for inbound traffic for the policy | |
| Context | configure service nat firewall-policy string filtering keyword | |
| Tree | filtering | |
| Options | ||
| Default | endpoint-independent | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-outside
| Synopsis | Use Layer 2 outside service address location | |
| Context | configure service nat firewall-policy string l2-outside | |
| Tree | l2-outside | |
Description | This command specifies Layer 2 outside service address location for the NAT policy instead of Layer 3 outside service. | |
Notes | The following elements are part of a choice: domain or l2-outside. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-limits
| Synopsis | Enter the port-limits context | |
| Context | configure service nat firewall-policy string port-limits | |
| Tree | port-limits | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
forwarding number
| Synopsis | Maximum number of port forwarding entries | |
| Context | configure service nat firewall-policy string port-limits forwarding number | |
| Tree | forwarding | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
priority-sessions
| Synopsis | Enter the priority-sessions context | |
| Context | configure service nat firewall-policy string priority-sessions | |
| Tree | priority-sessions | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fc
| Synopsis | Enter the fc context | |
| Context | configure service nat firewall-policy string priority-sessions fc | |
| Tree | fc | |
Description | Commands in this context specify which Forwarding Class (FC) options have prioritized sessions. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
af boolean
| Synopsis | Prioritize traffic from AF forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc af boolean | |
| Tree | af | |
Description | When configured to true, traffic from Assured Forwarding (AF) FC sessions is prioritized. When configured to false, AF traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
be boolean
| Synopsis | Prioritize traffic from BE forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc be boolean | |
| Tree | be | |
Description | When configured to true, traffic from Best Effort (BE) FC sessions is prioritized. When configured to false, BE traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ef boolean
| Synopsis | Prioritize traffic from EF forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc ef boolean | |
| Tree | ef | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h1 boolean
| Synopsis | Prioritize traffic from H1 forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc h1 boolean | |
| Tree | h1 | |
Description | When configured to true, traffic from H1 sessions is prioritized. When configured to false, H1 traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h2 boolean
| Synopsis | Prioritize traffic from H2 forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc h2 boolean | |
| Tree | h2 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l1 boolean
| Synopsis | Prioritize traffic from L1 forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc l1 boolean | |
| Tree | l1 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2 boolean
| Synopsis | Prioritize traffic from L2 forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc l2 boolean | |
| Tree | l2 | |
Description | When configured to true, traffic from L2 sessions is prioritized. When configured to false, L2 traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nc boolean
| Synopsis | Prioritize traffic from NC forwarding classes | |
| Context | configure service nat firewall-policy string priority-sessions fc nc boolean | |
| Tree | nc | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
session-limits
| Synopsis | Enter the session-limits context | |
| Context | configure service nat firewall-policy string session-limits | |
| Tree | session-limits | |
Description | Commands in this context configure session-limit attributes for the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max number
| Synopsis | Maximum number of sessions per subscriber | |
| Context | configure service nat firewall-policy string session-limits max number | |
| Tree | max | |
| Range | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reserved number
| Synopsis | Number of sessions reserved for prioritized sessions | |
| Context | configure service nat firewall-policy string session-limits reserved number | |
| Tree | reserved | |
Description | This command configures the number of sessions per block that are reserved for prioritized sessions. | |
| Range | 1 to 65534 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat firewall-policy string session-limits watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat firewall-policy string session-limits watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat firewall-policy string session-limits watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp
| Synopsis | Enter the tcp context | |
| Context | configure service nat firewall-policy string tcp | |
| Tree | tcp | |
Description | Commands in this context configure the transmission control protocol (TCP) attributes of the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mss-adjust number
| Synopsis | TCP MSS adjustment value | |
| Context | configure service nat firewall-policy string tcp mss-adjust number | |
| Tree | mss-adjust | |
Description | This command configures the value to use to adjust the TCP Maximum Segment Size (MSS) option, if not already present or the present value is higher. | |
| Range | 160 to 10240 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
timeouts
| Synopsis | Enter the timeouts context | |
| Context | configure service nat firewall-policy string timeouts | |
| Tree | timeouts | |
Description | Commands in this context configure the attributes of session idle timeouts for the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
icmp6-query number
| Synopsis | Timeout applied to an ICMPv6 Query session | |
| Context | configure service nat firewall-policy string timeouts icmp6-query number | |
| Tree | icmp6-query | |
| Range | 60 to 240 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sip number
tcp
established number
| Synopsis | Idle timeout for TCP session in established state | |
| Context | configure service nat firewall-policy string timeouts tcp established number | |
| Tree | established | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 7440 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rst number
| Synopsis | Suspend time for TCP connection ports closed by RST | |
| Context | configure service nat firewall-policy string timeouts tcp rst number | |
| Tree | rst | |
Description | This command configures the suspend time for outside TCP ports that are used in translations for TCP connections, when they are closed by TCP Reset (RST). After the timer expires, the outside ports can be reused for new TCP translations. | |
| Range | 0 to 240 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
syn number
time-wait number
transitory number
| Synopsis | Idle timeout for TCP session in transitory state | |
| Context | configure service nat firewall-policy string timeouts tcp transitory number | |
| Tree | transitory | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 240 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
udp
dns number
initial number
normal number
unknown-protocol number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Timeout for flows with an unknown protocol | |
| Context | configure service nat firewall-policy string timeouts unknown-protocol number | |
| Tree | unknown-protocol | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
udp
| Synopsis | Enter the udp context | |
| Context | configure service nat firewall-policy string udp | |
| Tree | udp | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inbound-refresh boolean
| Synopsis | Extend UDP session timeout on inbound traffic | |
| Context | configure service nat firewall-policy string udp inbound-refresh boolean | |
| Tree | inbound-refresh | |
Description | When configured to true, this command extends the UDP session timeout on inbound traffic. When configured to false, the UDP session timeout is not extended. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
unknown-protocols
| Synopsis | Enter the unknown-protocols context | |
| Context | configure service nat firewall-policy string unknown-protocols | |
| Tree | unknown-protocols | |
Description | Commands in this context configure the treatment of flows of unknown Layer 4 protocols that cannot be natively handled by the system. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
all
| Synopsis | Allow all protocols to create unknown flows | |
| Context | configure service nat firewall-policy string unknown-protocols all | |
| Tree | all | |
Description | This command specifies that all protocols are permitted to create unknown flows. Protocol or IPv6 extension header values that are explicitly supported by SR OS are not treated as unknown protocols. | |
Notes | The following elements are part of a choice: all or protocol. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
protocol number
| Synopsis | IANA number of protocol allowed to create unknown flow | |
| Context | configure service nat firewall-policy string unknown-protocols protocol number | |
| Tree | protocol | |
Description | This command specifies the Internet Assigned Numbers Authority (IANA) number of a protocol that is permitted to create unknown flows. Protocol or IPv6 extension header values that are explicitly supported by SR OS can be configured but are not treated as unknown protocols. | |
| Range | 0 to 255 | |
| Max. Instances | 8 | |
|
Notes | The following elements are part of a choice: all or protocol. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
map-t
domain [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the MAP domain | |
| Context | configure service nat map-t domain string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
description string
| Synopsis | Text description | |
| Context | configure service nat map-t domain string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
dmr-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The Default Mapping Rule prefix | |
| Context | configure service nat map-t domain string dmr-prefix string | |
| Tree | dmr-prefix | |
| Introduced | 16.0.R4 | |
Platforms | VSR | |
ip-fragmentation
| Synopsis | Enter the ip-fragmentation context | |
| Context | configure service nat map-t domain string ip-fragmentation | |
| Tree | ip-fragmentation | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
v6-frag-header boolean
| Synopsis | Enable insertion of fragmentation header in IPv6 packet | |
| Context | configure service nat map-t domain string ip-fragmentation v6-frag-header boolean | |
| Tree | v6-frag-header | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | VSR |
mapping-rule [rule-name] string
| Synopsis | Enter the mapping-rule list instance | |
| Context | configure service nat map-t domain string mapping-rule string | |
| Tree | mapping-rule | |
| Max. Instances | 16383 | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
[rule-name] string
| Synopsis | The name that identifies this mapping rule | |
| Context | configure service nat map-t domain string mapping-rule string | |
| Tree | mapping-rule | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
admin-state keyword
| Synopsis | Administrative state of the MAP rule | |
| Context | configure service nat map-t domain string mapping-rule string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
description string
| Synopsis | Text description | |
| Context | configure service nat map-t domain string mapping-rule string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | VSR |
ea-length number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The length of the EA bits field in the End-user IPv6 prefix part of the IPv6 Map Address | |
| Context | configure service nat map-t domain string mapping-rule string ea-length number | |
| Tree | ea-length | |
| Range | 0 to 48 | |
| Default | 0 | |
| Introduced | 16.0.R4 | |
Platforms |
VSR | |
ipv4-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The IPv4 prefix | |
| Context | configure service nat map-t domain string mapping-rule string ipv4-prefix string | |
| Tree | ipv4-prefix | |
| Introduced | 16.0.R4 | |
Platforms | VSR | |
psid-offset number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The offset of the Port Set ID (PSID) within a 16 bits wide port space | |
| Context | configure service nat map-t domain string mapping-rule string psid-offset number | |
| Tree | psid-offset | |
| Range | 0 to 16 | |
| Default | 6 | |
| Introduced | 16.0.R4 | |
Platforms |
VSR | |
rule-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The IPv6 prefix | |
| Context | configure service nat map-t domain string mapping-rule string rule-prefix string | |
| Tree | rule-prefix | |
| Introduced | 16.0.R4 | |
Platforms | VSR | |
mtu number
tcp-mss-adjust number
| Synopsis | The value to adjust the TCP Maximum Segment Size (MSS) option | |
| Context | configure service nat map-t domain string tcp-mss-adjust number | |
| Tree | tcp-mss-adjust | |
| Range | 0 | 160 to 8626 | |
| Default | 0 | |
| Introduced | 16.0.R4 | |
Platforms |
VSR |
nat-policy [name] string
| Synopsis | Enter the nat-policy list instance | |
| Context | configure service nat nat-policy string | |
| Tree | nat-policy | |
| Max. Instances | 4096 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | NAT policy name | |
| Context | configure service nat nat-policy string | |
| Tree | nat-policy | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
alg
| Synopsis | Enter the alg context | |
| Context | configure service nat nat-policy string alg | |
| Tree | alg | |
Description | Commands in this context configure the Application Layer Gateway (ALG) attributes of the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ftp boolean
pptp boolean
| Synopsis | Use PPTP ALG for the policy | |
| Context | configure service nat nat-policy string alg pptp boolean | |
| Tree | pptp | |
Description | When configured to true, the policy uses Point-to-Point Tunneling Protocol (PPTP) ALG. PPTP sessions can only be initiated from NAT inside. GRE traffic is allowed through NAT only if the corresponding mapping exists. There can be seven calls (GRE tunnels) per control session. When configured to false, PPTP ALG is not used. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rtsp boolean
sip boolean
block-limit number
| Synopsis | Maximum number of port blocks per subscriber | |
| Context | configure service nat nat-policy string block-limit number | |
| Tree | block-limit | |
| Range | 1 to 40 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service nat nat-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dnat
| Synopsis | Enter the dnat context | |
| Context | configure service nat nat-policy string dnat | |
| Tree | dnat | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
classifier reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | NAT classifier | |
| Context | configure service nat nat-policy string dnat classifier reference | |
| Tree | classifier | |
Description | When configured within the NAT policy, this command references a NAT classifier that activates DNAT functionality. The configuration uses a filter-like approach to identify the traffic that is subjected to DNAT. It is required for translation of the destination IP address. | |
Reference | configure service nat classifier string | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dnat-only
| Synopsis | Enable the dnat-only context | |
| Context | configure service nat nat-policy string dnat-only | |
| Tree | dnat-only | |
Description | Commands in this context configure the attributes of DNAT-only. When DNAT-only is configured, no source or port NAT (SNAPT) is performed. Only the destination IP address (going from inside to outside) is translated; the source IP address and port are not translated. | |
Notes | The following elements are part of a choice: dnat-only, l2-outside, or pool. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-group reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT group | |
| Context | configure service nat nat-policy string dnat-only nat-group reference | |
| Tree | nat-group | |
Description | This command configures the NAT group in which DNAT translation takes place for the outside routing context. | |
Reference | ||
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Router name or VPRN service name | |
| Context | configure service nat nat-policy string dnat-only router-instance string | |
| Tree | router-instance | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw-group reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | WLAN GW group used for NAT | |
| Context | configure service nat nat-policy string dnat-only wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Description | This command configures the NAT WLAN Gateway (GW) group in which DNAT translation takes place for the outside routing context. | |
Reference | configure isa wlan-gw-group number | |
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
filtering keyword
| Synopsis | Filtering method for inbound traffic for the policy | |
| Context | configure service nat nat-policy string filtering keyword | |
| Tree | filtering | |
| Options | ||
| Default | endpoint-independent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
flow-log-policy
| Synopsis | Enter the flow-log-policy context | |
| Context | configure service nat nat-policy string flow-log-policy | |
| Tree | flow-log-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipfix reference
| Synopsis | IPFIX export policy | |
| Context | configure service nat nat-policy string flow-log-policy ipfix reference | |
| Tree | ipfix | |
Description | This command specifies an IP flow information export policy for the flow-log policy. | |
Reference | configure service ipfix export-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
syslog reference
| Synopsis | Syslog export policy name | |
| Context | configure service nat nat-policy string flow-log-policy syslog reference | |
| Tree | syslog | |
Description | This command configures a syslog export policy with a set of transport parameters used to transmit NAT flow records in syslog format to an external collector node. The policy name is referenced from the NAT policy applied to an inside routing context. | |
Reference | configure service nat syslog export-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-outside
| Synopsis | Use Layer 2 outside service address location | |
| Context | configure service nat nat-policy string l2-outside | |
| Tree | l2-outside | |
Description | This command specifies Layer 2 outside service address location for the NAT policy instead of Layer 3 outside service. | |
Notes | The following elements are part of a choice: dnat-only, l2-outside, or pool. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool
| Synopsis | Enter the pool context | |
| Context | configure service nat nat-policy string pool | |
| Tree | pool | |
Notes | The following elements are part of a choice: dnat-only, l2-outside, or pool. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
router-instance string
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Router or VPRN service name | |
| Context | configure service nat nat-policy string pool router-instance string | |
| Tree | router-instance | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
port-forwarding-range-end number
| Synopsis | End of the port forwarding range | |
| Context | configure service nat nat-policy string port-forwarding-range-end number | |
| Tree | port-forwarding-range-end | |
Description | This command specifies the end of the port range available for port forwarding. The start of the range is always equal to one. The number of ports that can be configured is half of the available block => 64512 / 2 = 32256. In combination with the configured value for port-forwarding-range-end, the formulas are: max port-reservation blocks = 65535 - port-forwarding-range-end max port-reservation ports = (65535 - port-forwarding-range-end) / 2 If port-reservation is already configured, the following applies for the maximum port-forwarding-range-end: max port-forwarding-range-end = 65535 - port-reservation blocksmax port-forwarding-range-end = 65535 - (port-reservation ports * 2) | |
| Range | 1023 to 65535 | |
| Default | 1023 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-limits
| Synopsis | Enter the port-limits context | |
| Context | configure service nat nat-policy string port-limits | |
| Tree | port-limits | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
forwarding number
| Synopsis | Maximum number of port forwarding entries | |
| Context | configure service nat nat-policy string port-limits forwarding number | |
| Tree | forwarding | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reserved number
| Synopsis | Number of ports reserved for prioritized sessions | |
| Context | configure service nat nat-policy string port-limits reserved number | |
| Tree | reserved | |
Description | This command configures the number of ports per block that are reserved for prioritized sessions. | |
| Range | 1 to 65534 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat nat-policy string port-limits watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat nat-policy string port-limits watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat nat-policy string port-limits watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
priority-sessions
| Synopsis | Enter the priority-sessions context | |
| Context | configure service nat nat-policy string priority-sessions | |
| Tree | priority-sessions | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fc
| Synopsis | Enter the fc context | |
| Context | configure service nat nat-policy string priority-sessions fc | |
| Tree | fc | |
Description | Commands in this context specify which Forwarding Class (FC) options have prioritized sessions. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
af boolean
| Synopsis | Prioritize traffic from AF forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc af boolean | |
| Tree | af | |
Description | When configured to true, traffic from Assured Forwarding (AF) FC sessions is prioritized. When configured to false, AF traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
be boolean
| Synopsis | Prioritize traffic from BE forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc be boolean | |
| Tree | be | |
Description | When configured to true, traffic from Best Effort (BE) FC sessions is prioritized. When configured to false, BE traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ef boolean
| Synopsis | Prioritize traffic from EF forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc ef boolean | |
| Tree | ef | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h1 boolean
| Synopsis | Prioritize traffic from H1 forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc h1 boolean | |
| Tree | h1 | |
Description | When configured to true, traffic from H1 sessions is prioritized. When configured to false, H1 traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h2 boolean
| Synopsis | Prioritize traffic from H2 forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc h2 boolean | |
| Tree | h2 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l1 boolean
| Synopsis | Prioritize traffic from L1 forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc l1 boolean | |
| Tree | l1 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2 boolean
| Synopsis | Prioritize traffic from L2 forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc l2 boolean | |
| Tree | l2 | |
Description | When configured to true, traffic from L2 sessions is prioritized. When configured to false, L2 traffic is not prioritized. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nc boolean
| Synopsis | Prioritize traffic from NC forwarding classes | |
| Context | configure service nat nat-policy string priority-sessions fc nc boolean | |
| Tree | nc | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
session-limits
| Synopsis | Enter the session-limits context | |
| Context | configure service nat nat-policy string session-limits | |
| Tree | session-limits | |
Description | Commands in this context configure session-limit attributes for the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max number
| Synopsis | Maximum number of sessions per subscriber | |
| Context | configure service nat nat-policy string session-limits max number | |
| Tree | max | |
| Range | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reserved number
| Synopsis | Number of sessions reserved for prioritized sessions | |
| Context | configure service nat nat-policy string session-limits reserved number | |
| Tree | reserved | |
Description | This command configures the number of sessions per block that are reserved for prioritized sessions. | |
| Range | 1 to 65534 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat nat-policy string session-limits watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat nat-policy string session-limits watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat nat-policy string session-limits watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp
| Synopsis | Enter the tcp context | |
| Context | configure service nat nat-policy string tcp | |
| Tree | tcp | |
Description | Commands in this context configure the transmission control protocol (TCP) attributes of the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mss-adjust number
| Synopsis | TCP MSS adjustment value | |
| Context | configure service nat nat-policy string tcp mss-adjust number | |
| Tree | mss-adjust | |
Description | This command configures the value to use to adjust the TCP Maximum Segment Size (MSS) option, if not already present or the present value is higher. | |
| Range | 160 to 10240 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reset-unknown boolean
| Synopsis | Generate TCP reset for packets from unknown flows | |
| Context | configure service nat nat-policy string tcp reset-unknown boolean | |
| Tree | reset-unknown | |
Description | When configured to true, TCP packets are dropped and a TCP reset is generated if the NAT inside receives a TCP packet without the SYN flag set for an unknown flow. When configured to false, no TCP reset is generated. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
timeouts
| Synopsis | Enter the timeouts context | |
| Context | configure service nat nat-policy string timeouts | |
| Tree | timeouts | |
Description | Commands in this context configure the attributes of session idle timeouts for the policy. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
icmp-query number
| Synopsis | Timeout applied to an ICMP Query session | |
| Context | configure service nat nat-policy string timeouts icmp-query number | |
| Tree | icmp-query | |
| Range | 60 to 240 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sip number
subscriber-retention number
| Synopsis | IP address hold time after host and port blocks expire | |
| Context | configure service nat nat-policy string timeouts subscriber-retention number | |
| Tree | subscriber-retention | |
Description | This command configures the time to keep a NAT subscriber and its associated IP address after all hosts and associated port blocks expire. If a NAT subscriber host appears before the retention timeout elapses, it is given the same outside IP address. | |
| Range | 0 to 1440 | |
| Units | minutes | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp
established number
| Synopsis | Idle timeout for TCP session in established state | |
| Context | configure service nat nat-policy string timeouts tcp established number | |
| Tree | established | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 7440 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rst number
| Synopsis | Suspend time for TCP connection ports closed by RST | |
| Context | configure service nat nat-policy string timeouts tcp rst number | |
| Tree | rst | |
Description | This command configures the suspend time for outside TCP ports that are used in translations for TCP connections, when they are closed by TCP Reset (RST). After the timer expires, the outside ports can be reused for new TCP translations. | |
| Range | 0 to 240 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
syn number
time-wait number
transitory number
| Synopsis | Idle timeout for TCP session in transitory state | |
| Context | configure service nat nat-policy string timeouts tcp transitory number | |
| Tree | transitory | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 240 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
udp
dns number
initial number
normal number
udp
| Synopsis | Enter the udp context | |
| Context | configure service nat nat-policy string udp | |
| Tree | udp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inbound-refresh boolean
| Synopsis | Extend UDP session timeout on inbound traffic | |
| Context | configure service nat nat-policy string udp inbound-refresh boolean | |
| Tree | inbound-refresh | |
Description | When configured to true, this command extends the UDP session timeout on inbound traffic. When configured to false, the UDP session timeout is not extended. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pcp-server-policy [name] string
| Synopsis | Enter the pcp-server-policy list instance | |
| Context | configure service nat pcp-server-policy string | |
| Tree | pcp-server-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | PCP server policy name | |
| Context | configure service nat pcp-server-policy string | |
| Tree | pcp-server-policy | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service nat pcp-server-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lifetime
| Synopsis | Enter the lifetime context | |
| Context | configure service nat pcp-server-policy string lifetime | |
| Tree | lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
maximum number
minimum number
max-description-size number
| Synopsis | Maximum length of mapping descriptions made by the PCP servers | |
| Context | configure service nat pcp-server-policy string max-description-size number | |
| Tree | max-description-size | |
| Range | 1 to 64 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
opcode
| Synopsis | Enter the opcode context | |
| Context | configure service nat pcp-server-policy string opcode | |
| Tree | opcode | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
announce boolean
get boolean
map boolean
option
| Synopsis | Enter the option context | |
| Context | configure service nat pcp-server-policy string option | |
| Tree | option | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description boolean
| Synopsis | Text description | |
| Context | configure service nat pcp-server-policy string option description boolean | |
| Tree | description | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
next boolean
port-reservation boolean
| Synopsis | Process the PCP requests that contain the prefer failure option | |
| Context | configure service nat pcp-server-policy string option port-reservation boolean | |
| Tree | port-reservation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-set boolean
| Synopsis | Support the PORT_SET option in PCP MAP requests | |
| Context | configure service nat pcp-server-policy string option port-set boolean | |
| Tree | port-set | |
Description | When configured to true, the PCP MAP option optimizes PCP performance for applications that require multiple sets of port forwards. A range of consecutive port forwards can be requested by the PCP client with a single PCP request. When configured to false, the default behavior is applied, where a plain MAP option is used to allocate a single port in a single request. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefer-failure boolean
| Synopsis | Process the PCP requests that contain the port reservation option | |
| Context | configure service nat pcp-server-policy string option prefer-failure boolean | |
| Tree | prefer-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
third-party boolean
| Synopsis | Process the PCP requests that contain the third party option | |
| Context | configure service nat pcp-server-policy string option third-party boolean | |
| Tree | third-party | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reuse-external-ip-address boolean
| Synopsis | Reuse external IP address for NAT subscriber | |
| Context | configure service nat pcp-server-policy string reuse-external-ip-address boolean | |
| Tree | reuse-external-ip-address | |
Description | When configured to true, the system reuses the external IP address assigned to a subscriber when the requested well-known port or external IP mapping is not available. When configured to false, a request for a well-known port is allocated as requested on a different external IP address if the port is already allocated to another subscriber sharing the same external IP address. The existing external IP address is initially allocated to the subscriber as a result of the initial traffic flow. This configuration flag can be set dynamically but the flag affects only PCP port forwards that are created after the flag has been set. | |
| Default | false | |
| Introduced | 19.10.R3 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
version
| Synopsis | Enter the version context | |
| Context | configure service nat pcp-server-policy string version | |
| Tree | version | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
maximum number
minimum number
prefix-list [name] string
| Synopsis | Enter the prefix-list list instance | |
| Context | configure service nat prefix-list string | |
| Tree | prefix-list | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | NAT prefix list name | |
| Context | configure service nat prefix-list string | |
| Tree | prefix-list | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
application keyword
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Prefix list for the application | |
| Context | configure service nat prefix-list string application keyword | |
| Tree | application | |
| Options | ||
| Default | l2-aware-dest-to-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix [ip-prefix] string
| Synopsis | Enter the prefix list instance | |
| Context | configure service nat prefix-list string prefix string | |
| Tree | prefix | |
| Max. Instances | 1024 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[ip-prefix] string
| Synopsis | NAT prefix | |
| Context | configure service nat prefix-list string prefix string | |
| Tree | prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT policy for LSN | |
| Context | configure service nat prefix-list string prefix string nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
syslog
export-policy [name] string
| Synopsis | Enter the export-policy list instance | |
| Context | configure service nat syslog export-policy string | |
| Tree | export-policy | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | Syslog export policy name | |
| Context | configure service nat syslog export-policy string | |
| Tree | export-policy | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
collector router-instance string ip-address string
| Synopsis | Enter the collector list instance | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
| Max. Instances | 2 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Router instance | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IPv4 address of the external collector node | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string | |
| Tree | collector | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the collector node | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
destination-port number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination port | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string destination-port number | |
| Tree | destination-port | |
| Range | 1 to 65535 | |
| Default | 514 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv4-source-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 source address | |
| Context | configure service nat syslog export-policy string collector router-instance string ip-address string ipv4-source-address string | |
| Tree | ipv4-source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service nat syslog export-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
facility keyword
include
destination-ip boolean
| Synopsis | Include the translated destination IP address | |
| Context | configure service nat syslog export-policy string include destination-ip boolean | |
| Tree | destination-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
foreign-ip boolean
| Synopsis | Include the original destination IPv4 address | |
| Context | configure service nat syslog export-policy string include foreign-ip boolean | |
| Tree | foreign-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
foreign-port boolean
| Synopsis | Include the original destination port | |
| Context | configure service nat syslog export-policy string include foreign-port boolean | |
| Tree | foreign-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy-name boolean
| Synopsis | Include the NAT policy name in the flow log | |
| Context | configure service nat syslog export-policy string include nat-policy-name boolean | |
| Tree | nat-policy-name | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sub-id boolean
log-prefix string
| Synopsis | Optional prefix text in the MSG part of the NAT syslog messages | |
| Context | configure service nat syslog export-policy string log-prefix string | |
| Tree | log-prefix | |
| String Length | 1 to 32 | |
| Default | TMNX | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max-tx-delay number
| Synopsis | Maximum time a syslog message delays in the output buffer to aggregate multiple events | |
| Context | configure service nat syslog export-policy string max-tx-delay number | |
| Tree | max-tx-delay | |
| Range | 0 to 100 | |
| Units | deciseconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mtu number
rate-limit number
| Synopsis | Frame limit | |
| Context | configure service nat syslog export-policy string rate-limit number | |
| Tree | rate-limit | |
| Range | 10 to 2147483647 | |
| Units | packets per second | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
severity-level keyword
| Synopsis | Severity level in the PRI part of the syslog messages | |
| Context | configure service nat syslog export-policy string severity-level keyword | |
| Tree | severity-level | |
| Options | ||
| Default | info | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
up-nat-policy [name] string
| Synopsis | Enter the up-nat-policy list instance | |
| Context | configure service nat up-nat-policy string | |
| Tree | up-nat-policy | |
| Max. Instances | 32 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | UP NAT policy name | |
| Context | configure service nat up-nat-policy string | |
| Tree | up-nat-policy | |
Description | This command specifies the UP NAT policy name. The name default has a special meaning representing the default UP NAT policy template. The system uses the default template when the BNG CPF does not receive a more specific name when the subscriber is instantiated. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
alg
| Synopsis | Enter the alg context | |
| Context | configure service nat up-nat-policy string alg | |
| Tree | alg | |
Description | Commands in this context configure the Application Layer Gateway (ALG) attributes of the policy. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ftp boolean
pptp boolean
| Synopsis | Use PPTP ALG for the policy | |
| Context | configure service nat up-nat-policy string alg pptp boolean | |
| Tree | pptp | |
Description | When configured to true, the policy uses Point-to-Point Tunneling Protocol (PPTP) ALG. PPTP sessions can only be initiated from NAT inside. GRE traffic is allowed through NAT only if the corresponding mapping exists. There can be seven calls (GRE tunnels) per control session. When configured to false, PPTP ALG is not used. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rtsp boolean
sip boolean
block-limit number
| Synopsis | Maximum number of port blocks per NAT subscriber | |
| Context | configure service nat up-nat-policy string block-limit number | |
| Tree | block-limit | |
| Range | 1 to 10 | |
| Default | 1 | |
| Introduced | 23.3.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-host
| Synopsis | Enable the default-host context | |
| Context | configure service nat up-nat-policy string default-host | |
| Tree | default-host | |
Description | Commands in this context configure the default DMZ host options. A default DMZ host is a node on the inside to which all unknown traffic is redirected by changing the destination IPv4 address in the traffic header. During this operation, the checksums in the Layer 3 and Layer 4 header (UDP and TCP) are recalculated. Unknown traffic in NAT represent all unmatched traffic arriving from the outside (where there is no pinhole or a matching flow record created by traffic initiated from the inside). The purpose of the default DMZ host is to capture and analyze the unknown traffic as part of threat analysis. The rate of redirected unknown traffic can be restricted by configuration. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inside-router-instance string
| Synopsis | Router instance of the DMZ | |
| Context | configure service nat up-nat-policy string default-host inside-router-instance string | |
| Tree | inside-router-instance | |
Description | This command configures the router instance on the inside where the default DMZ host resides. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IP address of the default DMZ host | |
| Context | configure service nat up-nat-policy string default-host ip-address string | |
| Tree | ip-address | |
Description | This command configures the IP address of the default DMZ host. Redirection to the default DMZ host is achieved by replacing the destination IP address in the traffic header in the unknown traffic initiated from the outside with the one of the default DMZ host. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rate-limit number
| Synopsis | Rate limit for unknown traffic sent to default DMZ host | |
| Context | configure service nat up-nat-policy string default-host rate-limit number | |
| Tree | rate-limit | |
Description | This command configures the rate limit of the unknown traffic sent to the default DMZ host. Unknown traffic sent to the default DMZ host is rate limited by a configurable value expressed in mbps. The rate limit is configurable per NAT pool per ISA, vISA, or ESA-VM. | |
| Range | 1 to 10000 | |
| Units | megabps | |
| Default | 10 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service nat up-nat-policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
filtering keyword
| Synopsis | Filtering method for inbound traffic for the policy | |
| Context | configure service nat up-nat-policy string filtering keyword | |
| Tree | filtering | |
| Options | ||
| Default | endpoint-independent | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
flow-log-policy
| Synopsis | Enter the flow-log-policy context | |
| Context | configure service nat up-nat-policy string flow-log-policy | |
| Tree | flow-log-policy | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipfix reference
| Synopsis | IPFIX export policy | |
| Context | configure service nat up-nat-policy string flow-log-policy ipfix reference | |
| Tree | ipfix | |
Description | This command specifies an IP flow information export policy for the flow-log policy. | |
Reference | configure service ipfix export-policy string | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
icmp-echo-reply boolean
| Synopsis | Enable replies to ICMP Echo Request messages | |
| Context | configure service nat up-nat-policy string icmp-echo-reply boolean | |
| Tree | icmp-echo-reply | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-block-extension
| Synopsis | Enable the port-block-extension context | |
| Context | configure service nat up-nat-policy string port-block-extension | |
| Tree | port-block-extension | |
Description | Commands in this context configure the attributes for dynamic allocation of NAT port-blocks beyond the initial port-blocks. | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ports number
| Synopsis | Number of ports per dynamic port block | |
| Context | configure service nat up-nat-policy string port-block-extension ports number | |
| Tree | ports | |
| Range | 10 to 5000 | |
Notes | This element is mandatory. | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat up-nat-policy string port-block-extension watermarks | |
| Tree | watermarks | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat up-nat-policy string port-block-extension watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 23.3.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat up-nat-policy string port-block-extension watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 23.3.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-limits
| Synopsis | Enter the port-limits context | |
| Context | configure service nat up-nat-policy string port-limits | |
| Tree | port-limits | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reserved number
| Synopsis | Number of ports reserved for prioritized sessions | |
| Context | configure service nat up-nat-policy string port-limits reserved number | |
| Tree | reserved | |
Description | This command configures the number of ports per block that are reserved for prioritized sessions. | |
| Range | 1 to 65534 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat up-nat-policy string port-limits watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat up-nat-policy string port-limits watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat up-nat-policy string port-limits watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
priority-sessions
| Synopsis | Enter the priority-sessions context | |
| Context | configure service nat up-nat-policy string priority-sessions | |
| Tree | priority-sessions | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fc
| Synopsis | Enter the fc context | |
| Context | configure service nat up-nat-policy string priority-sessions fc | |
| Tree | fc | |
Description | Commands in this context specify which Forwarding Class (FC) options have prioritized sessions. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
af boolean
| Synopsis | Prioritize traffic from AF forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc af boolean | |
| Tree | af | |
Description | When configured to true, traffic from Assured Forwarding (AF) FC sessions is prioritized. When configured to false, AF traffic is not prioritized. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
be boolean
| Synopsis | Prioritize traffic from BE forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc be boolean | |
| Tree | be | |
Description | When configured to true, traffic from Best Effort (BE) FC sessions is prioritized. When configured to false, BE traffic is not prioritized. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ef boolean
| Synopsis | Prioritize traffic from EF forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc ef boolean | |
| Tree | ef | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h1 boolean
| Synopsis | Prioritize traffic from H1 forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc h1 boolean | |
| Tree | h1 | |
Description | When configured to true, traffic from H1 sessions is prioritized. When configured to false, H1 traffic is not prioritized. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
h2 boolean
| Synopsis | Prioritize traffic from H2 forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc h2 boolean | |
| Tree | h2 | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l1 boolean
| Synopsis | Prioritize traffic from L1 forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc l1 boolean | |
| Tree | l1 | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2 boolean
| Synopsis | Prioritize traffic from L2 forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc l2 boolean | |
| Tree | l2 | |
Description | When configured to true, traffic from L2 sessions is prioritized. When configured to false, L2 traffic is not prioritized. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nc boolean
| Synopsis | Prioritize traffic from NC forwarding classes | |
| Context | configure service nat up-nat-policy string priority-sessions fc nc boolean | |
| Tree | nc | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
session-limits
| Synopsis | Enter the session-limits context | |
| Context | configure service nat up-nat-policy string session-limits | |
| Tree | session-limits | |
Description | Commands in this context configure session-limit attributes for the policy. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max number
| Synopsis | Maximum number of sessions per subscriber | |
| Context | configure service nat up-nat-policy string session-limits max number | |
| Tree | max | |
| Range | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reserved number
| Synopsis | Number of sessions reserved for prioritized sessions | |
| Context | configure service nat up-nat-policy string session-limits reserved number | |
| Tree | reserved | |
Description | This command configures the number of sessions per block that are reserved for prioritized sessions. | |
| Range | 1 to 65534 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service nat up-nat-policy string session-limits watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service nat up-nat-policy string session-limits watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service nat up-nat-policy string session-limits watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp
| Synopsis | Enter the tcp context | |
| Context | configure service nat up-nat-policy string tcp | |
| Tree | tcp | |
Description | Commands in this context configure the transmission control protocol (TCP) attributes of the policy. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mss-adjust number
| Synopsis | TCP MSS adjustment value | |
| Context | configure service nat up-nat-policy string tcp mss-adjust number | |
| Tree | mss-adjust | |
Description | This command configures the value to use to adjust the TCP Maximum Segment Size (MSS) option, if not already present or the present value is higher. | |
| Range | 160 to 10240 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reset-unknown boolean
| Synopsis | Generate TCP reset for packets from unknown flows | |
| Context | configure service nat up-nat-policy string tcp reset-unknown boolean | |
| Tree | reset-unknown | |
Description | When configured to true, TCP packets are dropped and a TCP reset is generated if the NAT inside receives a TCP packet without the SYN flag set for an unknown flow. When configured to false, no TCP reset is generated. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
timeouts
| Synopsis | Enter the timeouts context | |
| Context | configure service nat up-nat-policy string timeouts | |
| Tree | timeouts | |
Description | Commands in this context configure the attributes of session idle timeouts for the policy. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
icmp-query number
| Synopsis | Timeout applied to an ICMP Query session | |
| Context | configure service nat up-nat-policy string timeouts icmp-query number | |
| Tree | icmp-query | |
| Range | 60 to 240 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sip number
subscriber-retention number
| Synopsis | IP address hold time after host and port blocks expire | |
| Context | configure service nat up-nat-policy string timeouts subscriber-retention number | |
| Tree | subscriber-retention | |
Description | This command configures the time to keep a NAT subscriber and its associated IP address after all hosts and associated port blocks expire. If a NAT subscriber host appears before the retention timeout elapses, it is given the same outside IP address. | |
| Range | 0 to 1440 | |
| Units | minutes | |
| Default | 0 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp
established number
| Synopsis | Idle timeout for TCP session in established state | |
| Context | configure service nat up-nat-policy string timeouts tcp established number | |
| Tree | established | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 7440 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rst number
| Synopsis | Suspend time for TCP connection ports closed by RST | |
| Context | configure service nat up-nat-policy string timeouts tcp rst number | |
| Tree | rst | |
Description | This command configures the suspend time for outside TCP ports that are used in translations for TCP connections, when they are closed by TCP Reset (RST). After the timer expires, the outside ports can be reused for new TCP translations. | |
| Range | 0 to 240 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
syn number
time-wait number
transitory number
| Synopsis | Idle timeout for TCP session in transitory state | |
| Context | configure service nat up-nat-policy string timeouts tcp transitory number | |
| Tree | transitory | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 240 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
udp
dns number
initial number
normal number
udp
| Synopsis | Enter the udp context | |
| Context | configure service nat up-nat-policy string udp | |
| Tree | udp | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inbound-refresh boolean
| Synopsis | Extend UDP session timeout on inbound traffic | |
| Context | configure service nat up-nat-policy string udp inbound-refresh boolean | |
| Tree | inbound-refresh | |
Description | When configured to true, this command extends the UDP session timeout on inbound traffic. When configured to false, the UDP session timeout is not extended. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
oper-group [name] string
| Synopsis | Enter the oper-group list instance | |
| Context | configure service oper-group string | |
| Tree | oper-group | |
| Max. Instances | 32768 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] string
| Synopsis | Operational group name | |
| Context | configure service oper-group string | |
| Tree | oper-group | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service oper-group string bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
dest-ip string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address for BFD | |
| Context | configure service oper-group string bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Source interface name | |
| Context | configure service oper-group string bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
router-instance string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Routing context used for route lookup | |
| Context | configure service oper-group string bfd-liveness router-instance string | |
| Tree | router-instance | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service oper-group string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
down number
| Synopsis | Oper group hold down time | |
| Context | configure service oper-group string hold-time down number | |
| Tree | down | |
| Range | 1 to 3600 | |
| Units | seconds | |
| Introduced | 16.0.R3 | |
Platforms |
All |
up number
| Synopsis | Oper group hold up time | |
| Context | configure service oper-group string hold-time up number | |
| Tree | up | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Default | 4 | |
| Introduced | 16.0.R3 | |
Platforms | All |
pbb
mac [name] string
[name] string
address string
mac-notification
| Synopsis | Enter the mac-notification context | |
| Context | configure service pbb mac-notification | |
| Tree | mac-notification | |
| Introduced | 16.0.R1 | |
Platforms | All |
count number
| Synopsis | MAC notification messages count | |
| Context | configure service pbb mac-notification count number | |
| Tree | count | |
| Range | 1 to 10 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
interval number
| Synopsis | Interval for MAC-notification messages | |
| Context | configure service pbb mac-notification interval number | |
| Tree | interval | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
source-bmac
| Synopsis | Enter the source-bmac context | |
| Context | configure service pbb source-bmac | |
| Tree | source-bmac | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
| Synopsis | Source B-VPLS MAC address to use with PBB | |
| Context | configure service pbb source-bmac address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-etree-leaf-address string
| Synopsis | Source Backbone VPLS MAC address to use with Provider Backbone Bridging (PBB) | |
| Context | configure service pbb source-bmac evpn-etree-leaf-address string | |
| Tree | evpn-etree-leaf-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
proxy-arp-nd
| Synopsis | Enter the proxy-arp-nd context | |
| Context | configure service proxy-arp-nd | |
| Tree | proxy-arp-nd | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-list
| Synopsis | Enter the mac-list context | |
| Context | configure service proxy-arp-nd mac-list | |
| Tree | mac-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
list [list-name] string
| Synopsis | Enter the list list instance | |
| Context | configure service proxy-arp-nd mac-list list string | |
| Tree | list | |
| Introduced | 16.0.R1 | |
Platforms | All |
[list-name] string
| Synopsis | Specify name for mac list | |
| Context | configure service proxy-arp-nd mac-list list string | |
| Tree | list | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac [address] string
[address] string
pw-template [pw-template-name] string
| Synopsis | Enter the pw-template list instance | |
| Context | configure service pw-template string | |
| Tree | pw-template | |
| Max. Instances | 2048 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[pw-template-name] string
| Synopsis | SDP template name | |
| Context | configure service pw-template string | |
| Tree | pw-template | |
| String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
accounting-policy number
| Synopsis | Accounting policy | |
| Context | configure service pw-template string accounting-policy number | |
| Tree | accounting-policy | |
| Range | 1 to 99 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
allow-fragmentation boolean
| Synopsis | Allow packets to be sent without setting DF bit | |
| Context | configure service pw-template string allow-fragmentation boolean | |
| Tree | allow-fragmentation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
auto-gre-sdp boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Use a GRE tunnel to automatically create an SDP | |
| Context | configure service pw-template string auto-gre-sdp boolean | |
| Tree | auto-gre-sdp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
block-on-peer-fault boolean
| Synopsis | Enable block traffic on peer fault | |
| Context | configure service pw-template string block-on-peer-fault boolean | |
| Tree | block-on-peer-fault | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
collect-stats boolean
| Synopsis | Collect statistics | |
| Context | configure service pw-template string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Enable/Disable the use of ControlWord | |
| Context | configure service pw-template string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
egress
| Synopsis | Enter the egress context | |
| Context | configure service pw-template string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
filter
| Synopsis | Enter the filter context | |
| Context | configure service pw-template string egress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip string
ipv6 string
mac string
mfib-allowed-mda-destinations
| Synopsis | Enter the mfib-allowed-mda-destinations context | |
| Context | configure service pw-template string egress mfib-allowed-mda-destinations | |
| Tree | mfib-allowed-mda-destinations | |
| Introduced | 16.0.R1 | |
Platforms | All |
mda [mda-id] string
| Synopsis | Add a list entry for mda | |
| Context | configure service pw-template string egress mfib-allowed-mda-destinations mda string | |
| Tree | mda | |
| Introduced | 16.0.R1 | |
Platforms | All |
[mda-id] string
| Synopsis | MFIB allowed MDA destination | |
| Context | configure service pw-template string egress mfib-allowed-mda-destinations mda string | |
| Tree | mda | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service pw-template string egress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | All |
network
policy-name string
| Synopsis | Network policy ID | |
| Context | configure service pw-template string egress qos network policy-name string | |
| Tree | policy-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service pw-template string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name string
| Synopsis | Name of the egress port queue group template | |
| Context | configure service pw-template string egress qos network port-redirect-group group-name string | |
| Tree | group-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance for FP ingress queue group | |
| Context | configure service pw-template string egress qos network port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
encryption-keygroup
| Synopsis | Enter the encryption-keygroup context | |
| Context | configure service pw-template string encryption-keygroup | |
| Tree | encryption-keygroup | |
| Introduced | 19.10.R1 | |
Platforms | VSR |
inbound number
| Synopsis | Keygroup identifier in the inbound direction | |
| Context | configure service pw-template string encryption-keygroup inbound number | |
| Tree | inbound | |
| Range | 1 to 127 | |
| Introduced | 19.10.R1 | |
|
Platforms | VSR |
outbound number
| Synopsis | Keygroup identifier in the outbound direction | |
| Context | configure service pw-template string encryption-keygroup outbound number | |
| Tree | outbound | |
| Range | 1 to 127 | |
| Introduced | 19.10.R1 | |
|
Platforms | VSR |
entropy-label
| Synopsis | Enable the use of an entropy label | |
| Context | configure service pw-template string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fdb
| Synopsis | Enter the fdb context | |
| Context | configure service pw-template string fdb | |
| Tree | fdb | |
| Introduced | 16.0.R1 | |
Platforms | All |
auto-learn-mac-protect boolean
| Synopsis | Enable automatic update of MAC protect list | |
| Context | configure service pw-template string fdb auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
auto-learn-mac-protect-exclude-list string
| Synopsis | Name of the MAC protect exclusion list | |
| Context | configure service pw-template string fdb auto-learn-mac-protect-exclude-list string | |
| Tree | auto-learn-mac-protect-exclude-list | |
Description | This command configures the name of a MAC protect exclusion list. Dynamically-learned MAC Source Addresses (SA) are protected if they are learned on an object with ALMP configured and no exclusion list is associated with the object, or if the MAC SA does not match any entry in an associated exclusion list. An exclusion list can be used in multiple objects of a service. If a list is empty, ALMP does not exclude any learned MAC SAs from protection on the object. | |
| String Length | 1 to 32 | |
| Introduced | 20.5.R1 | |
Platforms | All |
discard-unknown-source boolean
| Synopsis | Discard frames with unknown source | |
| Context | configure service pw-template string fdb discard-unknown-source boolean | |
| Tree | discard-unknown-source | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit-mac-move keyword
| Synopsis | MAC move limit | |
| Context | configure service pw-template string fdb limit-mac-move keyword | |
| Tree | limit-mac-move | |
| Options | ||
| Default | blockable | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service pw-template string fdb mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R1 | |
Platforms | All |
aging boolean
| Synopsis | Enable aging of MAC addresses | |
| Context | configure service pw-template string fdb mac-learning aging boolean | |
| Tree | aging | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
learning boolean
| Synopsis | Enable learning of new MAC addresses | |
| Context | configure service pw-template string fdb mac-learning learning boolean | |
| Tree | learning | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-pinning boolean
| Synopsis | Enable MAC address pinning on this spoke SDP | |
| Context | configure service pw-template string fdb mac-pinning boolean | |
| Tree | mac-pinning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-mac-addresses number
| Synopsis | Maximum number of MAC address entries in the FDB | |
| Context | configure service pw-template string fdb maximum-mac-addresses number | |
| Tree | maximum-mac-addresses | |
Description | This command specifies the maximum number of FDB entries for both learned and static MAC addresses for this PW template. When the configured limit is reached, no new addresses are learned from the SAP or spoke SDP until at least one FDB entry is aged out or cleared. When the configured limit is reached and the configure service pw-template fdb discard-unknown-source command is set to true for this PW template, packets with unknown source MAC addresses are discarded. If discard-unknown-source is set to false, the packets are forwarded if their destination MAC addresses are known, or flooded if their destination MAC addresses are unknown. However, if the configure service vpls fdb discard-unknown command is set to true, packets with unknown destination MAC addresses are discarded, even if the limit of FDB entries on the specific VPLS instance is not reached. When unconfigured, the PW template uses the global MAC learning limitations. | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action for protected source MAC restriction | |
| Context | configure service pw-template string fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service pw-template string force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service pw-template string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service pw-template string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. The node must withdraw the label it sent to its peer and send a new label mapping message with the new value of the F-bit in the flow label interface option sub-TLV of the pseudowire ID FEC element. | |
| Introduced | 16.0.R1 | |
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service pw-template string igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service pw-template string igmp-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy string
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service pw-template string igmp-snooping import-policy string | |
| Tree | import-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum multicast groups | |
| Context | configure service pw-template string igmp-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service pw-template string igmp-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service pw-template string igmp-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service pw-template string igmp-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service pw-template string igmp-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service pw-template string igmp-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
version keyword
| Synopsis | IGMP version | |
| Context | configure service pw-template string igmp-snooping version keyword | |
| Tree | version | |
| Options | ||
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service pw-template string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
filter
| Synopsis | Enter the filter context | |
| Context | configure service pw-template string ingress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip string
ipv6 string
mac string
qos
| Synopsis | Enter the qos context | |
| Context | configure service pw-template string ingress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | All |
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service pw-template string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name string
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service pw-template string ingress qos network fp-redirect-group group-name string | |
| Tree | group-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance for FP ingress queue group | |
| Context | configure service pw-template string ingress qos network fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy-name string
| Synopsis | Network policy ID | |
| Context | configure service pw-template string ingress qos network policy-name string | |
| Tree | policy-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All |
l2pt
| Synopsis | Enter the l2pt context | |
| Context | configure service pw-template string l2pt | |
| Tree | l2pt | |
| Introduced | 16.0.R1 | |
Platforms | All |
termination
| Synopsis | Enable the termination context | |
| Context | configure service pw-template string l2pt termination | |
| Tree | termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
protocols
| Synopsis | Enter the protocols context | |
| Context | configure service pw-template string l2pt termination protocols | |
| Tree | protocols | |
| Introduced | 16.0.R1 | |
Platforms | All |
cdp boolean
| Synopsis | Enable Cisco discovery protocol | |
| Context | configure service pw-template string l2pt termination protocols cdp boolean | |
| Tree | cdp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dtp boolean
| Synopsis | Enable dynamic trunking protocol | |
| Context | configure service pw-template string l2pt termination protocols dtp boolean | |
| Tree | dtp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pagp boolean
| Synopsis | Enable port aggregation protocol | |
| Context | configure service pw-template string l2pt termination protocols pagp boolean | |
| Tree | pagp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
stp boolean
| Synopsis | Enable all spanning tree protocols | |
| Context | configure service pw-template string l2pt termination protocols stp boolean | |
| Tree | stp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
udld boolean
| Synopsis | Enable unidirectional link detection | |
| Context | configure service pw-template string l2pt termination protocols udld boolean | |
| Tree | udld | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
vtp boolean
| Synopsis | Enable virtual trunk protocol | |
| Context | configure service pw-template string l2pt termination protocols vtp boolean | |
| Tree | vtp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
provisioned-sdp keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Provisioned SDP type | |
| Context | configure service pw-template string provisioned-sdp keyword | |
| Tree | provisioned-sdp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All | |
pw-template-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | PW Template Id | |
| Context | configure service pw-template string pw-template-id number | |
| Tree | pw-template-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
sdp-exclude [group-name] reference
| Synopsis | Add a list entry for sdp-exclude | |
| Context | configure service pw-template string sdp-exclude reference | |
| Tree | sdp-exclude | |
| Introduced | 16.0.R1 | |
Platforms | All |
[group-name] reference
| Synopsis | SDP group name | |
| Context | configure service pw-template string sdp-exclude reference | |
| Tree | sdp-exclude | |
Reference | configure service sdp-group group-name string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
sdp-include [group-name] reference
| Synopsis | Add a list entry for sdp-include | |
| Context | configure service pw-template string sdp-include reference | |
| Tree | sdp-include | |
| Introduced | 16.0.R1 | |
Platforms | All |
[group-name] reference
| Synopsis | SDP group name | |
| Context | configure service pw-template string sdp-include reference | |
| Tree | sdp-include | |
Reference | configure service sdp-group group-name string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
split-horizon-group
| Synopsis | Enter the split-horizon-group context | |
| Context | configure service pw-template string split-horizon-group | |
| Tree | split-horizon-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service pw-template string split-horizon-group description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fdb
| Synopsis | Enter the fdb context | |
| Context | configure service pw-template string split-horizon-group fdb | |
| Tree | fdb | |
| Introduced | 16.0.R1 | |
Platforms | All |
saps
| Synopsis | Enter the saps context | |
| Context | configure service pw-template string split-horizon-group fdb saps | |
| Tree | saps | |
| Introduced | 16.0.R1 | |
Platforms | All |
auto-learn-mac-protect boolean
| Synopsis | Enable automatic update of MAC protect list | |
| Context | configure service pw-template string split-horizon-group fdb saps auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
discard-unprotected-dest-mac boolean
| Synopsis | Enable/disable unprotected dest MAC restriction | |
| Context | configure service pw-template string split-horizon-group fdb saps discard-unprotected-dest-mac boolean | |
| Tree | discard-unprotected-dest-mac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action for protected source MAC restriction | |
| Context | configure service pw-template string split-horizon-group fdb saps protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
name string
| Synopsis | Split horizon group name to which the SDP belongs | |
| Context | configure service pw-template string split-horizon-group name string | |
| Tree | name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
stp
| Synopsis | Enter the stp context | |
| Context | configure service pw-template string stp | |
| Tree | stp | |
| Introduced | 16.0.R4 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of STP | |
| Context | configure service pw-template string stp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms |
All |
auto-edge boolean
| Synopsis | Enable automatic detection of edge port characteristics | |
| Context | configure service pw-template string stp auto-edge boolean | |
| Tree | auto-edge | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
edge-port boolean
| Synopsis | Designate SAP or SDP as an edge port | |
| Context | configure service pw-template string stp edge-port boolean | |
| Tree | edge-port | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
link-type keyword
| Synopsis | Configure STP link-type | |
| Context | configure service pw-template string stp link-type keyword | |
| Tree | link-type | |
| Options | ||
| Default | pt-pt | |
| Introduced | 16.0.R4 | |
Platforms | All |
path-cost number
| Synopsis | Configure path-cost | |
| Context | configure service pw-template string stp path-cost number | |
| Tree | path-cost | |
| Range | 1 to 200000000 | |
| Default | 10 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
priority number
| Synopsis | Configure STP priority | |
| Context | configure service pw-template string stp priority number | |
| Tree | priority | |
| Range | 0 to 255 | |
| Default | 128 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
root-guard boolean
| Synopsis | Enable/disable STP root-guard | |
| Context | configure service pw-template string stp root-guard boolean | |
| Tree | root-guard | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
vc-type keyword
| Synopsis | Virtual circuit type associated with the SDP bind | |
| Context | configure service pw-template string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All |
vlan-vc-tag number
| Synopsis | VLAN VC tag | |
| Context | configure service pw-template string vlan-vc-tag number | |
| Tree | vlan-vc-tag | |
| Range | 0 to 4094 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sdp [sdp-id] number
[sdp-id] number
accounting-policy reference
| Synopsis | Accounting policy associated with an SDP | |
| Context | configure service sdp number accounting-policy reference | |
| Tree | accounting-policy | |
Description | This command associates an accounting policy with an SDP. When unconfigured, there is no accounting policy applied to the SDP. | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP | |
| Context | configure service sdp number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
adv-mtu-override boolean
| Synopsis | Override the advertised VC-type MTU using the SDP ID | |
| Context | configure service sdp number adv-mtu-override boolean | |
| Tree | adv-mtu-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
allow-fragmentation boolean
| Synopsis | Allow packets to be sent without setting DF bit | |
| Context | configure service sdp number allow-fragmentation boolean | |
| Tree | allow-fragmentation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bgp-tunnel boolean
| Synopsis | Allow use of BGP route tunnels to reach far-end nodes | |
| Context | configure service sdp number bgp-tunnel boolean | |
| Tree | bgp-tunnel | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
booking-factor number
| Synopsis | Percentage of SDP max available bandwidth for VLL CAC | |
| Context | configure service sdp number booking-factor number | |
| Tree | booking-factor | |
| Range | 0 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
class-forwarding
| Synopsis | Enable the class-forwarding context | |
| Context | configure service sdp number class-forwarding | |
| Tree | class-forwarding | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of class-based forwarding | |
| Context | configure service sdp number class-forwarding admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-lsp reference
| Synopsis | Default LSP for class-based forwarding on the SDP | |
| Context | configure service sdp number class-forwarding default-lsp reference | |
| Tree | default-lsp | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
enforce-diffserv-lsp-fc boolean
| Synopsis | Enable RSVP validation of FC support by the LSP | |
| Context | configure service sdp number class-forwarding enforce-diffserv-lsp-fc boolean | |
| Tree | enforce-diffserv-lsp-fc | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fc [fc-name] keyword
| Synopsis | Enter the fc list instance | |
| Context | configure service sdp number class-forwarding fc keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
| Synopsis | Forwarding class to LSP mapping | |
| Context | configure service sdp number class-forwarding fc keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lsp reference
multicast-lsp reference
| Synopsis | LSP to forward all multicast traffic | |
| Context | configure service sdp number class-forwarding multicast-lsp reference | |
| Tree | multicast-lsp | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
collect-stats boolean
| Synopsis | Collect accounting statistics for this SDP | |
| Context | configure service sdp number collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
delivery-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Delivery type used by the SDP | |
| Context | configure service sdp number delivery-type keyword | |
| Tree | delivery-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All | |
description string
| Synopsis | Text description | |
| Context | configure service sdp number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
far-end
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the far end destination router | |
| Context | configure service sdp number far-end ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
| Introduced | 16.0.R3 | |
Platforms | All | |
keep-alive
| Synopsis | Enter the keep-alive context | |
| Context | configure service sdp number keep-alive | |
| Tree | keep-alive | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of keepalive mechanism for the SDP | |
| Context | configure service sdp number keep-alive admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
hello-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time period between SDP keepalive messages | |
| Context | configure service sdp number keep-alive hello-time number | |
| Tree | hello-time | |
| Range | 1 to 3600 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
hold-down-time number
| Synopsis | Minimum time the SDP remains in the down state | |
| Context | configure service sdp number keep-alive hold-down-time number | |
| Tree | hold-down-time | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-drop-count number
| Synopsis | Maximum failed request attempts when SDP is down | |
| Context | configure service sdp number keep-alive maximum-drop-count number | |
| Tree | maximum-drop-count | |
| Range | 1 to 5 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
message-length number
| Synopsis | Length of the keepalive request messages transmitted | |
| Context | configure service sdp number keep-alive message-length number | |
| Tree | message-length | |
| Range | 40 to 9198 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
timeout number
| Synopsis | Time SDP waits before tearing down the session | |
| Context | configure service sdp number keep-alive timeout number | |
| Tree | timeout | |
| Range | 1 to 10 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ldp boolean
local-end (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local end address of tunnel defined by the SDP | |
| Context | configure service sdp number local-end (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-end | |
| Introduced | 16.0.R1 | |
Platforms | All | |
lsp [lsp-name] string
[lsp-name] string
metric number
mixed-lsp-mode
| Synopsis | Enable the mixed-lsp-mode context | |
| Context | configure service sdp number mixed-lsp-mode | |
| Tree | mixed-lsp-mode | |
| Introduced | 16.0.R1 | |
Platforms | All |
revert-time (number | keyword)
| Synopsis | Delay before SDP can revert to higher priority LSP type | |
| Context | configure service sdp number mixed-lsp-mode revert-time (number | keyword) | |
| Tree | revert-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Options | ||
| Default | immediate | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
network-domain reference
| Synopsis | Network domain name associated with the SDP | |
| Context | configure service sdp number network-domain reference | |
| Tree | network-domain | |
Reference | configure router string network-domains network-domain string | |
| Introduced | 16.0.R1 | |
Platforms | All |
path-mtu number
pbb-etype string
pw-port
binding-port string
| Synopsis | Binding port | |
| Context | configure service sdp number pw-port binding-port string | |
| Tree | binding-port | |
| Introduced | 16.0.R4 | |
Platforms | All |
sdp-group [group-name] reference
[group-name] reference
signaling keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Signaling protocol used to obtain pseudowire labels | |
| Context | configure service sdp number signaling keyword | |
| Tree | signaling | |
Description | This command specifies the signaling protocol used to obtain the ingress and egress pseudowire labels in frames transmitted and received on the SDP. The signaling value can only be changed while the administrative status of the SDP is down. Additionally, the signaling can only be changed on an SDP if the SDP is not in use by BGP-AD or BGP-VPLS. BGP signaling can only be enabled if the SDP does not already have pseudowires signaled over it. Also, BGP signaling is not supported with mixed mode LSP SDPs. Note: If the tldp option is selected as the mechanism for exchanging service labels over an MPLS or GRE SDP and the T-LDP session is automatically established, an explicit T-LDP session that is subsequently configured takes precedence over the automatic T-LDP session. However, if the explicit, manually-configured session is then removed, the system does not revert to the automatic session and the automatic session is also deleted. To address this, recreate the T-LDP session by using the admin-state command to administratively disable and then enable the SDP. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All | |
source-bmac-lsb
| Synopsis | Enter the source-bmac-lsb context | |
| Context | configure service sdp number source-bmac-lsb | |
| Tree | source-bmac-lsb | |
| Introduced | 16.0.R1 | |
Platforms | All |
control-pw-vc-id number
| Synopsis | VC ID of the control pseudowire | |
| Context | configure service sdp number source-bmac-lsb control-pw-vc-id number | |
| Tree | control-pw-vc-id | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
value string
| Synopsis | 16 least significant bits of virtual backbone MAC | |
| Context | configure service sdp number source-bmac-lsb value string | |
| Tree | value | |
| Introduced | 16.0.R1 | |
Platforms | All |
sr-isis boolean
sr-ospf boolean
tunnel-far-end (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System address of the far-end router for the SDP | |
| Context | configure service sdp number tunnel-far-end (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-far-end | |
| Introduced | 16.0.R1 | |
Platforms | All | |
vlan-vc-etype string
| Synopsis | VLAN VC Ethertype | |
| Context | configure service sdp number vlan-vc-etype string | |
| Tree | vlan-vc-etype | |
| String Length | 5 to 6 | |
| Default | 0x8100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weighted-ecmp boolean
| Synopsis | Allow weighted load-balancing on an SDP | |
| Context | configure service sdp number weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sdp-group
group-name [group-name] string
| Synopsis | Enter the group-name list instance | |
| Context | configure service sdp-group group-name string | |
| Tree | group-name | |
| Introduced | 16.0.R1 | |
Platforms | All |
[group-name] string
| Synopsis | SDP administrative group name | |
| Context | configure service sdp-group group-name string | |
| Tree | group-name | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
value number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Unique group value associated with the SDP admin group | |
| Context | configure service sdp-group group-name string value number | |
| Tree | value | |
| Range | 0 to 31 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
system
bgp
evpn
ad-per-es-route
| Synopsis | Enter the ad-per-es-route context | |
| Context | configure service system bgp evpn ad-per-es-route | |
| Tree | ad-per-es-route | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended-evi-range boolean
| Synopsis | Reserve extended RD comm-values for AD per-ES routes | |
| Context | configure service system bgp evpn ad-per-es-route extended-evi-range boolean | |
| Tree | extended-evi-range | |
Description | When configured to true, the system reserves the Route Distinguisher (RD) comm-values 1 to 65535 out of the type 1 RD that is used for AD per-ES routes. If ad-per-es-route route-target-type is also configured to evi-route-target-set, the system can pack the maximum number of EVI route targets in the AD per-ES routes When configured to false, this command only reserves comm-values 1 to 512. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
route-distinguisher-ip-address string
| Synopsis | IP address for route distinguisher for EVPN AD-ES routes | |
| Context | configure service system bgp evpn ad-per-es-route route-distinguisher-ip-address string | |
| Tree | route-distinguisher-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-target-type keyword
| Synopsis | Method for the AD per-ES routes advertisement | |
| Context | configure service system bgp evpn ad-per-es-route route-target-type keyword | |
| Tree | route-target-type | |
| Options | ||
| Default | evi-route-target | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ethernet-segment [ethernet-segment-name] string
| Synopsis | Enter the ethernet-segment list instance | |
| Context | configure service system bgp evpn ethernet-segment string | |
| Tree | ethernet-segment | |
| Max. Instances | 4095 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ethernet-segment-name] string
| Synopsis | Specify name for Ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string | |
| Tree | ethernet-segment | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ac-df-capability keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | AC-influenced DF election capability | |
| Context | configure service system bgp evpn ethernet-segment string ac-df-capability keyword | |
| Tree | ac-df-capability | |
Description | This command configures the Attachment Circuit-influenced (AC-influenced) designated forwarder (DF) election capability (AC-DF) into the DF election for the Ethernet Segment (ES). AC-DF supports EVPN Auto-Discovery per EVI/ES (AD per EVI/ES) routes for a specific PE, to ensure the PE is included in the candidate DF election list. When AC-DF is excluded on a specific ES, the presence or absence of the AD per EVI/ES routes from the ES peers does not modify the candidate DF election list for the ES. Excluding the AC-DF is recommended in ESs that use an operational group monitored by the access LAG to signal the standby LACP or to power-off. | |
| Options | ||
| Default | include | |
| Introduced | 21.5.R1 | |
Platforms | All | |
admin-state keyword
| Synopsis | Administrative state of the Ethernet segment instance | |
| Context | configure service system bgp evpn ethernet-segment string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
association
| Synopsis | Enter the association context | |
| Context | configure service system bgp evpn ethernet-segment string association | |
| Tree | association | |
| Introduced | 16.0.R1 | |
Platforms | All |
lag [lag-name] reference
| Synopsis | Enter the lag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference | |
| Tree | lag | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[lag-name] reference
| Synopsis | LAG multi-homed with the Ethernet segment entry | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference | |
| Tree | lag | |
Reference | configure lag string | |
Notes | This element is part of a list key. | |
| Introduced | 21.2.R1 | |
Platforms | All |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 16.0.R4 | |
Platforms | All |
dot1q
| Synopsis | Enter the dot1q context | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges dot1q | |
| Tree | dot1q | |
| Introduced | 16.0.R4 | |
Platforms | All |
q-tag [start] (number | keyword)
| Synopsis | Enter the q-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges dot1q q-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
qinq
| Synopsis | Enter the qinq context | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq | |
| Tree | qinq | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag [start] (number | keyword)
| Synopsis | Enter the s-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag-c-tag [s-tag] (number | keyword) c-tag-start (number | keyword)
| Synopsis | Enter the s-tag-c-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[s-tag] (number | keyword)
| Synopsis | Starting value of the qinq s-tag range associated with a virtual ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-start (number | keyword)
| Synopsis | Starting value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-end (number | keyword)
| Synopsis | End value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association lag reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) c-tag-end (number | keyword) | |
| Tree | c-tag-end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
network-interconnect-vxlan [network-interconnect-vxlan-id] number
| Synopsis | Enter the network-interconnect-vxlan list instance | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number | |
| Tree | network-interconnect-vxlan | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[network-interconnect-vxlan-id] number
| Synopsis | VXLAN instance ID associated with the virtual ES | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number | |
| Tree | network-interconnect-vxlan | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 16.0.R4 | |
Platforms | All |
service-id [start] number
| Synopsis | Enter the service-id list instance | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number virtual-ranges service-id number | |
| Tree | service-id | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] number
| Synopsis | Lower bound of the service ID range | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number virtual-ranges service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end number
| Synopsis | Upper bound of the service ID range | |
| Context | configure service system bgp evpn ethernet-segment string association network-interconnect-vxlan number virtual-ranges service-id number end number | |
| Tree | end | |
| Range | 1 to 2147483647 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
port [port-id] reference
| Synopsis | Enter the port list instance | |
| Context | configure service system bgp evpn ethernet-segment string association port reference | |
| Tree | port | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[port-id] reference
| Synopsis | Port multi-homed with this Ethernet segment entry | |
| Context | configure service system bgp evpn ethernet-segment string association port reference | |
| Tree | port | |
Reference | configure port string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 16.0.R4 | |
Platforms | All |
dot1q
| Synopsis | Enter the dot1q context | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges dot1q | |
| Tree | dot1q | |
| Introduced | 16.0.R4 | |
Platforms | All |
q-tag [start] (number | keyword)
| Synopsis | Enter the q-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges dot1q q-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
qinq
| Synopsis | Enter the qinq context | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq | |
| Tree | qinq | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag [start] (number | keyword)
| Synopsis | Enter the s-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag-c-tag [s-tag] (number | keyword) c-tag-start (number | keyword)
| Synopsis | Enter the s-tag-c-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[s-tag] (number | keyword)
| Synopsis | Starting value of the qinq s-tag range associated with a virtual ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-start (number | keyword)
| Synopsis | Starting value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-end (number | keyword)
| Synopsis | End value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) c-tag-end (number | keyword) | |
| Tree | c-tag-end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
pw-port [pw-port-id] reference
| Synopsis | Enter the pw-port list instance | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference | |
| Tree | pw-port | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 16.0.R4 | |
Platforms | All |
[pw-port-id] reference
| Synopsis | Pw-port multi-homed with this Ethernet segment entry | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference | |
| Tree | pw-port | |
Reference | configure pw-port number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
pw-port-headend boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Control state of PW SAPs on PW port using EVPN | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference pw-port-headend boolean | |
| Tree | pw-port-headend | |
Description | When configured to true, this command allows EVPN and its multi-homing procedures to control the state of the PW SAPs on the PW port. When configured to false, this command disallows EVPN and its multi-homing procedures to control the state of the PW SAPs on the PW port. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All | |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 16.0.R4 | |
Platforms | All |
dot1q
| Synopsis | Enter the dot1q context | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges dot1q | |
| Tree | dot1q | |
| Introduced | 16.0.R4 | |
Platforms | All |
q-tag [start] (number | keyword)
| Synopsis | Enter the q-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges dot1q q-tag (number | keyword) | |
| Tree | q-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the q-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges dot1q q-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
qinq
| Synopsis | Enter the qinq context | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq | |
| Tree | qinq | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag [start] (number | keyword)
| Synopsis | Enter the s-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] (number | keyword)
| Synopsis | Lower bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag (number | keyword) | |
| Tree | s-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end (number | keyword)
| Synopsis | Upper bound of the s-tag VLAN ID range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag (number | keyword) end (number | keyword) | |
| Tree | end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
s-tag-c-tag [s-tag] (number | keyword) c-tag-start (number | keyword)
| Synopsis | Enter the s-tag-c-tag list instance | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[s-tag] (number | keyword)
| Synopsis | Starting value of the qinq s-tag range associated with a virtual ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-start (number | keyword)
| Synopsis | Starting value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) | |
| Tree | s-tag-c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
c-tag-end (number | keyword)
| Synopsis | End value of the qinq c-tag range | |
| Context | configure service system bgp evpn ethernet-segment string association pw-port reference virtual-ranges qinq s-tag-c-tag (number | keyword) c-tag-start (number | keyword) c-tag-end (number | keyword) | |
| Tree | c-tag-end | |
| Range | 0 to 4094 | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
sdp [sdp-id] reference
| Synopsis | Enter the sdp list instance | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference | |
| Tree | sdp | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[sdp-id] reference
| Synopsis | Sdp multi-homed with this Ethernet segment entry | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference | |
| Tree | sdp | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 16.0.R4 | |
Platforms | All |
vc-id [start] number
| Synopsis | Enter the vc-id list instance | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference virtual-ranges vc-id number | |
| Tree | vc-id | |
| Max. Instances | 8 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
[start] number
| Synopsis | Lower bound of the VC-ID range | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference virtual-ranges vc-id number | |
| Tree | vc-id | |
| Range | 1 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
end number
| Synopsis | Upper bound of the VC-ID range | |
| Context | configure service system bgp evpn ethernet-segment string association sdp reference virtual-ranges vc-id number end number | |
| Tree | end | |
| Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
vprn-next-hop [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the vprn-next-hop list instance | |
| Context | configure service system bgp evpn ethernet-segment string association vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | vprn-next-hop | |
Description | Commands in this list instance are used to associate an IPv4 or IPv6 address to an Ethernet segment. A virtual Ethernet segment using this VPRN next-hop association represents a Layer 3 Ethernet segment as described in draft-sajassi-bess-evpn-ip-aliasing. This IP address must be installed in the route table of the VPRN service identified by the EVI so that the Auto-Discovery per-ES or EVI routes for the ES are advertised. Only one VPRN next hop is supported per Ethernet segment. | |
| Max. Instances | 1 | |
Notes | The following elements are part of a choice: lag, network-interconnect-vxlan, port, pw-port, sdp, or vprn-next-hop. | |
| Introduced | 22.10.R1 | |
Platforms | All |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | VPRN next-hop address | |
| Context | configure service system bgp evpn ethernet-segment string association vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | vprn-next-hop | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | All |
virtual-ranges
| Synopsis | Enter the virtual-ranges context | |
| Context | configure service system bgp evpn ethernet-segment string association vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) virtual-ranges | |
| Tree | virtual-ranges | |
| Introduced | 22.10.R1 | |
Platforms | All |
evi [start] number
| Synopsis | Add a list entry for evi | |
| Context | configure service system bgp evpn ethernet-segment string association vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) virtual-ranges evi number | |
| Tree | evi | |
| Max. Instances | 1 | |
| Introduced | 22.10.R1 | |
|
Platforms | All |
[start] number
| Synopsis | EVI range start information | |
| Context | configure service system bgp evpn ethernet-segment string association vprn-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) virtual-ranges evi number | |
| Tree | evi | |
| Range | 1 to 16777215 | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | All |
auto-esi keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | EVPN Ethernet segment auto-ESI type | |
| Context | configure service system bgp evpn ethernet-segment string auto-esi keyword | |
| Tree | auto-esi | |
Description | This command configures the auto-ESI type to use in the Ethernet segment (ES).When type-1 is configured, a manual ESI cannot be configured and the ESI is automatically derived in accordance with the RFC 7432 ESI type 1 definition.When configured to none, a manual ESI must be configured. | |
| Options | ||
| Default | none | |
| Introduced | 21.5.R1 | |
Platforms | All | |
df-election
| Synopsis | Enter the df-election context | |
| Context | configure service system bgp evpn ethernet-segment string df-election | |
| Tree | df-election | |
| Introduced | 16.0.R1 | |
Platforms | All |
es-activation-timer number
| Synopsis | Activation timer per Ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string df-election es-activation-timer number | |
| Tree | es-activation-timer | |
| Range | 0 to 100 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
manual
| Synopsis | Enter the manual context | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual | |
| Tree | manual | |
| Introduced | 16.0.R1 | |
Platforms | All |
evi [start] number
| Synopsis | Enter the evi list instance | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual evi number | |
| Tree | evi | |
| Introduced | 16.0.R1 | |
Platforms | All |
[start] number
| Synopsis | Lower bound of EVI range for which the PE is primary | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual evi number | |
| Tree | evi | |
| Range | 1 to 16777215 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of EVI range for which the PE is primary | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual evi number end number | |
| Tree | end | |
| Range | 1 to 16777215 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
isid [start] number
| Synopsis | Enter the isid list instance | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual isid number | |
| Tree | isid | |
| Introduced | 16.0.R1 | |
Platforms | All |
[start] number
| Synopsis | Lower bound of ISID range for which the PE is primary | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual isid number | |
| Tree | isid | |
| Range | 1 to 16777215 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of ISID range for which the PE is primary | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual isid number end number | |
| Tree | end | |
| Range | 1 to 16777215 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
preference
| Synopsis | Enable the preference context | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual preference | |
| Tree | preference | |
| Introduced | 16.0.R1 | |
Platforms | All |
mode keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Method used to elect the DF | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual preference mode keyword | |
| Tree | mode | |
| Options | ||
| Default | revertive | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
value number
| Synopsis | Preference that is used to elect the designated forwarder | |
| Context | configure service system bgp evpn ethernet-segment string df-election manual preference value number | |
| Tree | value | |
| Range | 0 to 65535 | |
| Default | 32767 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
service-carving-mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Mode of service carving enabled per EVPN associated with this Ethernet segment entry | |
| Context | configure service system bgp evpn ethernet-segment string df-election service-carving-mode keyword | |
| Tree | service-carving-mode | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
esi string
multi-homing-mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multi-homing mode of the Ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string multi-homing-mode keyword | |
| Tree | multi-homing-mode | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
Platforms | All | |
oper-group reference
| Synopsis | Operational group ID | |
| Context | configure service system bgp evpn ethernet-segment string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 19.10.R1 | |
Platforms | All |
orig-ip (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Originating IP address advertised in the ES route | |
| Context | configure service system bgp evpn ethernet-segment string orig-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | orig-ip | |
| Introduced | 16.0.R4 | |
Platforms | All | |
pbb
es-bmac-table-size number
| Synopsis | Size of virtual backbone mac table for this ethernet segment | |
| Context | configure service system bgp evpn ethernet-segment string pbb es-bmac-table-size number | |
| Tree | es-bmac-table-size | |
| Range | 1 to 511999 | |
| Default | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
source-bmac-lsb string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Least significant bytes of the B-MAC for packet source | |
| Context | configure service system bgp evpn ethernet-segment string pbb source-bmac-lsb string | |
| Tree | source-bmac-lsb | |
| Introduced | 16.0.R1 | |
Platforms | All | |
route-next-hop (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Next-hop IP address for ES and AD per ES routes | |
| Context | configure service system bgp evpn ethernet-segment string route-next-hop (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | route-next-hop | |
| Introduced | 16.0.R4 | |
Platforms | All | |
type keyword
etree-leaf-label boolean
| Synopsis | Enable E-Tree leaf label for PE | |
| Context | configure service system bgp evpn etree-leaf-label boolean | |
| Tree | etree-leaf-label | |
Description | When configured to true, this command enables EVPN Ethernet-Tree (E-Tree) VPLS services on the router (not B-VPLS), allocates an E-Tree leaf label for the Provider Edge (PE) device, and configures the ILM entry.This command ensures that in-flight traffic can perform an ILM entry lookup at any time, and avoids discards when administratively enabling or disabling services, or reduces the timing window so that it does not occur during normal operation or configuration. The value for the E-Tree leaf label is set via the etree-leaf-label-value command. When configured to false, PE leaf labels are not supported. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
etree-leaf-label-value (number | keyword)
| Synopsis | Global E-tree leaf label for PE in EVPN E-Tree services | |
| Context | configure service system bgp evpn etree-leaf-label-value (number | keyword) | |
| Tree | etree-leaf-label-value | |
| Range | 32 to 524526 | |
| Options | ||
| Default | dynamic | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
ip-prefix-routes
| Synopsis | Enter the ip-prefix-routes context | |
| Context | configure service system bgp evpn ip-prefix-routes | |
| Tree | ip-prefix-routes | |
| Introduced | 21.2.R1 | |
Platforms | All |
d-path-length-ignore boolean
| Synopsis | Ignore D-PATH length for BGP path selection of EVPN-IFF | |
| Context | configure service system bgp evpn ip-prefix-routes d-path-length-ignore boolean | |
| Tree | d-path-length-ignore | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
iff-attribute-uniform-propagation boolean
| Synopsis | Enable uniform propagation of BGP attributes | |
| Context | configure service system bgp evpn ip-prefix-routes iff-attribute-uniform-propagation boolean | |
| Tree | iff-attribute-uniform-propagation | |
Description | When configured to true, this command enables the uniform propagation of BGP attributes for EVPN-IFF (Interfaceful) routes. EVPN-IFF is used in R-VPLS services with bgp-evpn ip-route-advertisement. When enabled, the received EVPN-IFF routes for the R-VPLS can be propagated with the original BGP path attributes into EVPN-IFL, IPVPN, EVPN-IFF (in other R-VPLS services) or BGP IP routes advertised for the attached VPRN. The command also enables the attribute propagation in the opposite direction, for example, from EVPN-IFL/IPVPN/IP/EVPN-IFF routes into EVPN-IFF routes. The propagation follows the uniform mode defined in draft-ietf-bess-evpn-ipvpn-interworking. When configured to false, this command re-originates the BGP Path Attributes when propagating EVPN-IFF routes into other Inter-Subnet Forwarding families. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
iff-bgp-path-selection boolean
| Synopsis | Enable BGP path selection for EVPN-IFF routes | |
| Context | configure service system bgp evpn ip-prefix-routes iff-bgp-path-selection boolean | |
| Tree | iff-bgp-path-selection | |
Description | When configured to true, this command enables the EVPN-IFF routes to be ordered and selected in a similar manner as IPVPN or EVPN-IFL routes, that is, based on the regular BGP path selection process. When configured to false, this command makes the system order EVPN-IFF routes based on their {RVPLS Ifindex, RD, Ethernet Tag}. For example, if two EVPN-IFF routes are received for the same prefix on the same R-VPLS and with different RDs (Route Distinguishers), the route with the lowest RD is selected. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
multicast-leave-sync-propagation number
| Synopsis | Multicast leave group synchronization delay | |
| Context | configure service system bgp evpn multicast-leave-sync-propagation number | |
| Tree | multicast-leave-sync-propagation | |
Description | This command configures the additional amount of time that the system waits before removing a multicast state that was synchronized in an Ethernet Segment via Multicast Join or Leave Synch routes. This value represents a delta corresponding to the time it takes for a BGP advertisement to propagate to ES peers. The node triggering the route computes the maximum response time as the product of the locally configured values, Last Member Query Count and Last Member Query Interval, and adds the delta value to the maximum response time. The query count value is configured in the configure services vrpn igmp robust-count command. The query interval value is taken from the configure service vpls sap igmp-snooping query-last-member-interval or the configure service vpls spoke-sdp igmp-snooping query-last-member-interval configuration, depending on the Ethernet Segment. Increasing the maximum response time by this value can help minimize the churn of removing and recreating the state on the node. This value should be configured consistently in all ES peers. | |
| Range | 0 to 300 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 20.7.R1 | |
Platforms | All |
route-distinguisher string
| Synopsis | Route distinguisher for ES routes | |
| Context | configure service system bgp evpn route-distinguisher string | |
| Tree | route-distinguisher | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-auto-rd-range
| Synopsis | Enter the bgp-auto-rd-range context | |
| Context | configure service system bgp-auto-rd-range | |
| Tree | bgp-auto-rd-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
community-value
| Synopsis | Enter the community-value context | |
| Context | configure service system bgp-auto-rd-range community-value | |
| Tree | community-value | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of BGP route distinguisher community range | |
| Context | configure service system bgp-auto-rd-range community-value end number | |
| Tree | end | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of BGP route distinguisher community range | |
| Context | configure service system bgp-auto-rd-range community-value start number | |
| Tree | start | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ip-address string
| Synopsis | IP address used for selecting the route distinguisher | |
| Context | configure service system bgp-auto-rd-range ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended-default-qinq-sap-lookup boolean
| Synopsis | Control the forwarding of the packets | |
| Context | configure service system extended-default-qinq-sap-lookup boolean | |
| Tree | extended-default-qinq-sap-lookup | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
fdb
table-size number
| Synopsis | Maximum FDB entries in the system | |
| Context | configure service system fdb table-size number | |
| Tree | table-size | |
Description | This command determines the maximum number of MAC entries in the forwarding database (FDB) for the system instance on this node. Do not configure the table-size command. This command is automatically initialized by SR OS on boot up. | |
| Range | 4095 to 2047999 | |
| Introduced | 16.0.R1 | |
Platforms | All |
gre-eth-bridged
| Synopsis | Enter the gre-eth-bridged context | |
| Context | configure service system gre-eth-bridged | |
| Tree | gre-eth-bridged | |
| Introduced | 16.0.R1 | |
Platforms | All |
tunnel-termination [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the tunnel-termination list instance | |
| Context | configure service system gre-eth-bridged tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Tunnel end-point IP address in the SR OS node | |
| Context | configure service system gre-eth-bridged tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fpe-id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | FPE ID | |
| Context | configure service system gre-eth-bridged tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) fpe-id reference | |
| Tree | fpe-id | |
Reference | configure fwd-path-ext fpe number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
pw-port-list
| Synopsis | Enter the pw-port-list context | |
| Context | configure service system pw-port-list | |
| Tree | pw-port-list | |
| Introduced | 16.0.R6 | |
Platforms | VSR |
port [port-id] string
| Synopsis | Add a list entry for port | |
| Context | configure service system pw-port-list port string | |
| Tree | port | |
| Introduced | 16.0.R6 | |
Platforms | VSR |
[port-id] string
| Synopsis | Port ID | |
| Context | configure service system pw-port-list port string | |
| Tree | port | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R6 | |
Platforms | VSR |
vpn-gre-source-ip string
| Synopsis | VPN GRE source ip-address | |
| Context | configure service system vpn-gre-source-ip string | |
| Tree | vpn-gre-source-ip | |
| Introduced | 16.0.R4 | |
Platforms | All |
vxlan
assisted-replication
| Synopsis | Enter the assisted-replication context | |
| Context | configure service system vxlan assisted-replication | |
| Tree | assisted-replication | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address string
| Synopsis | IP address for assisted replication in the router | |
| Context | configure service system vxlan assisted-replication ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
tunnel-termination [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the tunnel-termination list instance | |
| Context | configure service system vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Non-system IP address that terminates the VXLAN | |
| Context | configure service system vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fpe-id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | FPE id for this entry | |
| Context | configure service system vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) fpe-id reference | |
| Tree | fpe-id | |
Reference | configure fwd-path-ext fpe number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
template
epipe-sap-template [name] string
| Synopsis | Enter the epipe-sap-template list instance | |
| Context | configure service template epipe-sap-template string | |
| Tree | epipe-sap-template | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | SAP template name | |
| Context | configure service template epipe-sap-template string | |
| Tree | epipe-sap-template | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
| Synopsis | Enter the egress context | |
| Context | configure service template epipe-sap-template string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
filter
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service template epipe-sap-template string egress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mac reference
| Synopsis | MAC filter policy name | |
| Context | configure service template epipe-sap-template string egress filter mac reference | |
| Tree | mac | |
Reference | configure filter mac-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qos
policy-name reference
| Synopsis | SAP egress QoS policy name to apply to the SAP | |
| Context | configure service template epipe-sap-template string egress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service template epipe-sap-template string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
filter
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service template epipe-sap-template string ingress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mac reference
| Synopsis | MAC filter policy name | |
| Context | configure service template epipe-sap-template string ingress filter mac reference | |
| Tree | mac | |
Reference | configure filter mac-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qos
policy-name reference
| Synopsis | SAP ingress QoS policy name to apply to the SAP | |
| Context | configure service template epipe-sap-template string ingress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service template epipe-sap-template string ingress qos queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
upnp
policy [name] string
[name] string
description string
| Synopsis | Text description | |
| Context | configure service upnp policy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mapping-limit number
| Synopsis | Maximum number of UPnP mappings per subscriber | |
| Context | configure service upnp policy string mapping-limit number | |
| Tree | mapping-limit | |
| Range | 1 to 256 | |
| Default | 256 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port number
strict-mode boolean
| Synopsis | Enable UPnP strict mode | |
| Context | configure service upnp policy string strict-mode boolean | |
| Tree | strict-mode | |
Description | When configured to true, this command enables UPnP strict mode, in which the system only allows changes to an existing UPnP mapping if the request comes from the same UPnP client. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vpls [service-name] string
[service-name] string
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service vpls string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp [bgp-instance] number
[bgp-instance] number
adv-service-mtu number
| Synopsis | Advertised service MTU value | |
| Context | configure service vpls string bgp number adv-service-mtu number | |
| Tree | adv-service-mtu | |
Description | This command configures the MTU signaled value used in the BGP for the service. When configured, the router uses the value for signaling and for validation with the received MTU instead of the service MTU. However, the value does not affect the locally enforced value, which is still based on the service MTU. | |
| Range | 0 to 9782 | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
pw-template-binding [pw-template-name] reference
| Synopsis | Enter the pw-template-binding list instance | |
| Context | configure service vpls string bgp number pw-template-binding reference | |
| Tree | pw-template-binding | |
| Max. Instances | 100 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[pw-template-name] reference
| Synopsis | Policy name | |
| Context | configure service vpls string bgp number pw-template-binding reference | |
| Tree | pw-template-binding | |
Reference | configure service pw-template string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD | |
| Context | configure service vpls string bgp number pw-template-binding reference bfd-liveness boolean | |
| Tree | bfd-liveness | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-template reference
| Synopsis | BFD template name for PW-Template binding | |
| Context | configure service vpls string bgp number pw-template-binding reference bfd-template reference | |
| Tree | bfd-template | |
Reference | configure bfd bfd-template string | |
| Introduced | 16.0.R1 | |
Platforms | All |
import-rt string
monitor-oper-group reference
| Synopsis | Operational group to monitor | |
| Context | configure service vpls string bgp number pw-template-binding reference monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service vpls string bgp number pw-template-binding reference oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
split-horizon-group string
| Synopsis | Split horizon group | |
| Context | configure service vpls string bgp number pw-template-binding reference split-horizon-group string | |
| Tree | split-horizon-group | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-distinguisher (keyword | vpn-route-distinguisher)
| Synopsis | High-order 6 bytes that are used as string to compose VSI-ID for use in NLRI | |
| Context | configure service vpls string bgp number route-distinguisher (keyword | vpn-route-distinguisher) | |
| Tree | route-distinguisher | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
route-target
| Synopsis | Enter the route-target context | |
| Context | configure service vpls string bgp number route-target | |
| Tree | route-target | |
| Introduced | 16.0.R1 | |
Platforms | All |
export string
import string
vsi-export reference
| Synopsis | VSI export policies | |
| Context | configure service vpls string bgp number vsi-export reference | |
| Tree | vsi-export | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
vsi-import reference
| Synopsis | VSI import policies | |
| Context | configure service vpls string bgp number vsi-import reference | |
| Tree | vsi-import | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-ad
admin-state keyword
| Synopsis | Administrative state of BGP Auto-Discovery | |
| Context | configure service vpls string bgp-ad admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
vpls-id string
vsi-id-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VSI prefix value | |
| Context | configure service vpls string bgp-ad vsi-id-prefix string | |
| Tree | vsi-id-prefix | |
| Introduced | 16.0.R1 | |
Platforms | All | |
bgp-evpn
accept-ivpls-evpn-flush boolean
| Synopsis | Accept and process non-zero ethernet-tag MAC routes | |
| Context | configure service vpls string bgp-evpn accept-ivpls-evpn-flush boolean | |
| Tree | accept-ivpls-evpn-flush | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
evi number
| Synopsis | EVPN ID | |
| Context | configure service vpls string bgp-evpn evi number | |
| Tree | evi | |
Description | This command configures a 2-byte EVPN instance (EVI) unique in the system. It is used for the service-carving algorithm for multi-homing and auto-deriving route target and route distinguishers. If not specified, the EVPN ID value is zero and no route distinguisher or route targets are auto-derived from it. If the EVI ID value is specified and no other route-distinguisher or route-target is configured in the service, the following rules apply:
If VSI import and export policies are configured, the route target must be configured in the policies and those values take precedence over the auto-derived route targets. If bgp-ad vpls-id and bgp-evpn evi are both configured on the same service, the VPLS ID auto-derived route target or route distinguisher takes precedence over the values auto-derived from the EVI. Use the show service id bgp command to display the operational route target for a service. | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-mtu-mismatch boolean
| Synopsis | Ignore MTU mismatch | |
| Context | configure service vpls string bgp-evpn ignore-mtu-mismatch boolean | |
| Tree | ignore-mtu-mismatch | |
Description | When configured to true, the system ignores the received Layer 2 MTU in the L2 Attributes extended community of the IMET route for a peer. When configured to false, the system compares the local service MTU against the received Layer 2 MTU and if there is a mismatch, keeps the EVPN destination to the peer with operational state down. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All |
incl-mcast-orig-ip string
| Synopsis | Originating IP address | |
| Context | configure service vpls string bgp-evpn incl-mcast-orig-ip string | |
| Tree | incl-mcast-orig-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
isid-route-target
| Synopsis | Enter the isid-route-target context | |
| Context | configure service vpls string bgp-evpn isid-route-target | |
| Tree | isid-route-target | |
| Introduced | 16.0.R1 | |
Platforms | All |
range [start] number
[start] number
end number
route-target string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Route for the ISID range | |
| Context | configure service vpls string bgp-evpn isid-route-target range number route-target string | |
| Tree | route-target | |
| String Length | 10 to 28 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Method used to support the PBB-EVPN ISID-based route target advertisement | |
| Context | configure service vpls string bgp-evpn isid-route-target range number type keyword | |
| Tree | type | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mac-duplication
| Synopsis | Enter the mac-duplication context | |
| Context | configure service vpls string bgp-evpn mac-duplication | |
| Tree | mac-duplication | |
Description | Commands in this context configure the BGP EVPN MAC duplication command options. | |
| Introduced | 16.0.R1 | |
Platforms | All |
blackhole boolean
detect
num-moves number
trusted-mac-move-factor number
| Synopsis | Trusted MAC move factor | |
| Context | configure service vpls string bgp-evpn mac-duplication detect trusted-mac-move-factor number | |
| Tree | trusted-mac-move-factor | |
Description | This command configures the factor by which the number of moves is multiplied when detecting a MAC duplication event for trusted MACs. For example, if the number of moves is 5 and the trusted MAC move factor is 3, 5 moves, within the window, is enough to declare a non-trusted MAC as duplicate. However, 15 moves are needed to declare a trusted MAC as duplicate. By default the factor for a trusted MAC is the same as for a non-trusted MAC. This provides a backwards compatible solution upon upgrade of the node. | |
| Range | 1 to 10 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
All |
window number
retry (number | keyword)
trusted-mac-time number
| Synopsis | Trusted MAC time | |
| Context | configure service vpls string bgp-evpn mac-duplication trusted-mac-time number | |
| Tree | trusted-mac-time | |
Description | This command configures how long a MAC address needs to stay in the FDB as type learned without being flushed or changed in its type so the MAC is declared as trusted for the MAC duplication procedures. If the MAC changes from SAP to SAP within the same VPLS service and node, the MAC does not reset its trusted MAC timer. | |
| Range | 1 to 15 | |
| Units | minutes | |
| Default | 5 | |
| Introduced | 23.7.R1 | |
Platforms | All |
mpls [bgp-instance] number
[bgp-instance] number
admin-state keyword
| Synopsis | Administrative state of BGP EVPN MPLS | |
| Context | configure service vpls string bgp-evpn mpls number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
auto-bind-tunnel
| Synopsis | Enter the auto-bind-tunnel context | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel | |
| Tree | auto-bind-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-flex-algo-fallback boolean
| Synopsis | Enable flexible algorithm fallback | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel allow-flex-algo-fallback boolean | |
| Tree | allow-flex-algo-fallback | |
Description | When configured to true, a BGP router with a Flex-Algorithm action configured (via the configure policy-options policy-statement entry action flex-algo command) can resolve to a tunnel with algorithm 0 if no target Flex-Algorithm tunnel is available. When configured to false, the BGP router can resolve only to the intended Flex-Algorithm tunnel, which may cause traffic loss if no corresponding Flex-Algorithm tunnel is available. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
ecmp number
enforce-strict-tunnel-tagging boolean
| Synopsis | Enable/disable enforcement of strict tunnel tagging | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel enforce-strict-tunnel-tagging boolean | |
| Tree | enforce-strict-tunnel-tagging | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
resolution keyword
| Synopsis | Resolution method for tunnel selection | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
resolution-filter
| Synopsis | Enter the resolution-filter context | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter | |
| Tree | resolution-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp boolean
| Synopsis | Use BGP tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter bgp boolean | |
| Tree | bgp | |
Description | When configured to true, BGP searches the BGP LSP for the address of the BGP next hop. When configured to false, BGP tunneling is not used and inter-area or inter-as prefixes are not resolved. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ldp boolean
| Synopsis | Use LDP tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter ldp boolean | |
| Tree | ldp | |
Description | When configured to true, BGP searches for an LDP LSP with a FEC prefix corresponding to the address of the BGP next hop. When configured to false, LDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mpls-fwd-policy boolean
| Synopsis | Use MPLS forwarding policy for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter mpls-fwd-policy boolean | |
| Tree | mpls-fwd-policy | |
Description | When configured to true, BGP uses the MPLS forwarding policy to determine the address of the BGP next hop. When configured to false, the MPLS forwarding policy is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
rib-api boolean
| Synopsis | Use RIB API gRPC service for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter rib-api boolean | |
| Tree | rib-api | |
Description | When configured to true, BGP uses tunnels programmed using the RIB API gRPC service to resolve the next hops of routes imported into the EVPN service. When configured to false, the RIB API service tunnels are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
rsvp boolean
| Synopsis | Use RSVP tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter rsvp boolean | |
| Tree | rsvp | |
Description | When configured to true, BGP searches the best metric RSVP LSP to determine the address of the BGP next hop. This address can correspond to the system interface or to another loopback interface used by the BGP instance on the remote node. The LSP metric is provided by MPLS in the tunnel table. In the case of multiple RSVP LSPs with the same lowest metric, BGP selects the LSP with the lowest tunnel ID. When configured to false, the RSVP LSP is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-isis boolean
| Synopsis | Use IS-IS SR tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-isis boolean | |
| Tree | sr-isis | |
Description | When configured to true, BGP uses an IS-IS tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered IS-IS instance. When configured to false, IS-IS tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-ospf boolean
| Synopsis | Use OSPF SR tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf boolean | |
| Tree | sr-ospf | |
Description | When configured to true, BGP uses an OSPF tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF instance. When configured to false, OSPF tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sr-ospf3 boolean
| Synopsis | Use OSPFv3 SR tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf3 boolean | |
| Tree | sr-ospf3 | |
Description | When configured to true, BGP uses an OSPF3 tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF3 instance. When configured to false, OSPF3 tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
sr-policy boolean
| Synopsis | Use SR policies for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-policy boolean | |
| Tree | sr-policy | |
Description | When configured to true, this command instructs BGP to use an SR policy to determine the address of the BGP next hop.The SR policy search criteria includes a non-null endpoint and color value that matches the BGP next hop and color extended community value, respectively, of the EVPN route. When configured to false, SR policies are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
sr-te boolean
| Synopsis | Use SR-TE tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-te boolean | |
| Tree | sr-te | |
Description | When configured to true, BGP uses an SR-TE tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered tunnel ID. When configured to false, SR-TE tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
udp boolean
| Synopsis | Use MPLS over UDP tunneling for next-hop resolution | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel resolution-filter udp boolean | |
| Tree | udp | |
Description | When configured to true, BGP uses an MPLS over UDP tunnel type to determine the address of the BGP next hop. When configured to false, MPLS over UDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weighted-ecmp boolean
| Synopsis | Allow weighted load balancing | |
| Context | configure service vpls string bgp-evpn mpls number auto-bind-tunnel weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
Description | When configured to true, this router enables weighted ECMP for packets using tunnels that a VPLS or Epipe automatically binds to. Packets are sprayed across LSPs in the ECMP according to the outcome of the hash algorithm and the configured load balancing weight of each LSP. When configured to false, this command disables weighted ECMP for next-hop tunnel selection. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
control-word boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable control word support | |
| Context | configure service vpls string bgp-evpn mpls number control-word boolean | |
| Tree | control-word | |
Description | When configured to true, the router enables the transmission and reception of the control word for all EVPN-MPLS destinations at the same time. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service vpls string bgp-evpn mpls number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
dynamic-egress-label-limit boolean
| Synopsis | Enables dynamic egress label limit | |
| Context | configure service vpls string bgp-evpn mpls number dynamic-egress-label-limit boolean | |
| Tree | dynamic-egress-label-limit | |
Description | When configured to true, this command relaxes the egress MPLS label limit check when resolving BGP next hops in the tunnel table. For VPRN services, the OAM label is never computed and, therefore, one more egress label is allowed. For EVPN (Epipe and VPLS) services, the system only computes the control word and ESI label if they are used. For the control word, the system reduces the egress label limit by one label if the control word is configured in the service. When configured, the ESI label is not counted for Epipes or VPLS services without an ES. When configured to false this command, for EVPN, Epipe, and VPLS services, always accounts for the ESI label and control word. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
ecmp number
entropy-label boolean
| Synopsis | Allow use of entropy labels for spoke SDPs | |
| Context | configure service vpls string bgp-evpn mpls number entropy-label boolean | |
| Tree | entropy-label | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service vpls string bgp-evpn mpls number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All | |
fdb
protected-src-mac-violation-action keyword
| Synopsis | Relearn request for a protected MAC is received action | |
| Context | configure service vpls string bgp-evpn mpls number fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service vpls string bgp-evpn mpls number force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
ingress-replication-bum-label boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Use the same label as the one advertised for unicast traffic | |
| Context | configure service vpls string bgp-evpn mpls number ingress-replication-bum-label boolean | |
| Tree | ingress-replication-bum-label | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
mh-mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multihoming mode | |
| Context | configure service vpls string bgp-evpn mpls number mh-mode keyword | |
| Tree | mh-mode | |
Description | This command configures the multihoming mode for BGP-EVPN. Users can configure only one network instance for the service. If a provider tunnel is enabled for the service instance, this command must be configured using the network option. | |
| Options | ||
| Default | network | |
| Introduced | 21.10.R1 | |
Platforms | All | |
oper-group reference
| Synopsis | Operational group ID | |
| Context | configure service vpls string bgp-evpn mpls number oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 19.10.R1 | |
Platforms | All |
route-next-hop
| Synopsis | Enter the route-next-hop context | |
| Context | configure service vpls string bgp-evpn mpls number route-next-hop | |
| Tree | route-next-hop | |
Description | Commands in this context configure the next hop of the EVPN routes. | |
| Introduced | 19.10.R1 | |
Platforms | All |
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the next-hop for the service EVPN route | |
| Context | configure service vpls string bgp-evpn mpls number route-next-hop ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
system-ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv4 address for service EVPN route next hop | |
| Context | configure service vpls string bgp-evpn mpls number route-next-hop system-ipv4 | |
| Tree | system-ipv4 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
system-ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv6 address for service EVPN route next hop | |
| Context | configure service vpls string bgp-evpn mpls number route-next-hop system-ipv6 | |
| Tree | system-ipv6 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 19.10.R1 | |
Platforms | All | |
send-tunnel-encap
| Synopsis | Enter the send-tunnel-encap context | |
| Context | configure service vpls string bgp-evpn mpls number send-tunnel-encap | |
| Tree | send-tunnel-encap | |
| Introduced | 16.0.R1 | |
Platforms | All |
mpls boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS encapsulation | |
| Context | configure service vpls string bgp-evpn mpls number send-tunnel-encap mpls boolean | |
| Tree | mpls | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
mpls-over-udp boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS over UDP encapsulation | |
| Context | configure service vpls string bgp-evpn mpls number send-tunnel-encap mpls-over-udp boolean | |
| Tree | mpls-over-udp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
split-horizon-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Split horizon group | |
| Context | configure service vpls string bgp-evpn mpls number split-horizon-group reference | |
| Tree | split-horizon-group | |
Description | This command configures the value of split-horizon group for all BGP-EVPN segment routing v6 instances. | |
Reference | configure service vpls string split-horizon-group string | |
| Introduced | 16.0.R1 | |
Platforms | All | |
routes
incl-mcast
| Synopsis | Enter the incl-mcast context | |
| Context | configure service vpls string bgp-evpn routes incl-mcast | |
| Tree | incl-mcast | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-ingress-replication boolean
| Synopsis | BGP EVPN IMET-IR route advertisement | |
| Context | configure service vpls string bgp-evpn routes incl-mcast advertise-ingress-replication boolean | |
| Tree | advertise-ingress-replication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertise-l2-attributes boolean
| Synopsis | Advertise L2 attributes | |
| Context | configure service vpls string bgp-evpn routes incl-mcast advertise-l2-attributes boolean | |
| Tree | advertise-l2-attributes | |
Description | When configured to true, the service advertises of the Layer-2 Attributes extended community including:
Upon reception, the service compares the Layer 2 MTU for a peer with the local service MTU. If there is a mismatch, the EVPN destination is operational state down, except if the bgp-evpn ignore-mtu-mismatch command is enabled. The received C bit from a peer is compared with the local control-word setting. Upon a mismatch, the EVPN destination becomes operationally down. When configured to false, the router cannot advertise the Layer 2 Attributes extended community along with the Inclusive Multicast Ethernet Tag route for the service. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All |
ip-prefix
advertise boolean
domain-id string
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vpls string bgp-evpn routes ip-prefix domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 21.10.R1 | |
Platforms | All |
include-direct-interface-host boolean
| Synopsis | Advertise the interface host address in EVPN | |
| Context | configure service vpls string bgp-evpn routes ip-prefix include-direct-interface-host boolean | |
| Tree | include-direct-interface-host | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-bandwidth
| Synopsis | Enter the link-bandwidth context | |
| Context | configure service vpls string bgp-evpn routes ip-prefix link-bandwidth | |
| Tree | link-bandwidth | |
| Introduced | 22.7.R1 | |
Platforms | All |
advertise
max-dynamic-weight number
| Synopsis | Maximum weight of the advertised evpn-iff route | |
| Context | configure service vpls string bgp-evpn routes ip-prefix link-bandwidth advertise max-dynamic-weight number | |
| Tree | max-dynamic-weight | |
| Range | 1 to 128 | |
| Default | 128 | |
| Introduced | 22.7.R1 | |
Platforms |
All |
weight (number | keyword)
weighted-ecmp boolean
| Synopsis | Enable weighted ECMP | |
| Context | configure service vpls string bgp-evpn routes ip-prefix link-bandwidth weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
mac-ip
advertise boolean
arp-nd-extended-community boolean
| Synopsis | Enable ARP/ND extended community | |
| Context | configure service vpls string bgp-evpn routes mac-ip arp-nd-extended-community boolean | |
| Tree | arp-nd-extended-community | |
Description | When configured to true, the system advertises the RFC9047 ARP/ND extended community along with the MAC/IP routes advertised for local static and dynamic proxy ARP or ND entries. The system also processes the ARP/ND extended community and selects the ARP or ND entries based on the immutable flag. When configured to false, the system does not advertise the RFC9047 ARP/ND extended community. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All |
cfm-mac boolean
unknown-mac boolean
| Synopsis | Enable advertisement of unknown MAC route in BGP | |
| Context | configure service vpls string bgp-evpn routes mac-ip unknown-mac boolean | |
| Tree | unknown-mac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sel-mcast
advertise boolean
segment-routing-v6 [bgp-instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
Description | Commands in this context configure the SRv6 instance used in the service. | |
| Max. Instances | 1 | |
| Introduced | 22.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[bgp-instance] number
| Synopsis | BGP instance | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
admin-state keyword
| Synopsis | Administrative state of segment routing over IPv6 | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
ecmp number
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
fdb
protected-src-mac-violation-action keyword
| Synopsis | Relearn request for a protected MAC is received action | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
force-vc-forwarding keyword
| Synopsis | Datapath forwarding to force vlan-vc-type | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
Description | This command allows the system to preserve the VLAN ID and 802.1p bits of the service-delimiting qtag in a new tag added in the customer frame before sending it to the EVPN destinations. This command may be used in conjunction with the sap ingress vlan-translation command. If so used, the configured translated VLAN ID is the VLAN ID sent to the EVPN destinations as opposed to the service-delimiting tag VLAN ID. If the ingress SAP/SDP binding is 'null'-encapsulated, the output VLAN ID and pbits is zero. | |
| Options | ||
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
mh-mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multihoming mode | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number mh-mode keyword | |
| Tree | mh-mode | |
| Options | ||
| Default | network | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number oper-group reference | |
| Tree | oper-group | |
Description | This command adds the BGP EVPN SRv6 instance or an Ethernet Segment (ES) as a member of the operational group. When configured on a BGP EVPN instance, the operational group is up when it is either empty (meaning that the operational group has no members) or at least an EVPN destination is created under the EVPN instance added as member. When configured, no other SAP, SDP binding, or BGP EVPN instance can be added to the same operational group within the same or different service. The operational group is down when it is applied on a BGP EVPN instance as well as: the service is administratively disabled the BGP EVPN MPLS and VXLAN is administratively disabled all the EVPN destinations in the instance are removed When configured on an ES, the state of the operational group depends on the state of the SAPs contained in the ES. The operational group transitions to up if at least one SAP in the ES is up. The operational group goes down when all the associated SAPs are operationally down. Monitor the ES operational group on the LAG associated with the ES, along with single-active multihoming, so that the NDF state can be signaled to the CE by LAG standby signaling. | |
Reference | configure service oper-group string | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
resolution keyword
| Synopsis | Resolution options for routes | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | route-table | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
route-next-hop
| Synopsis | Enter the route-next-hop context | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number route-next-hop | |
| Tree | route-next-hop | |
Description | Commands in this context configure the next hop of the EVPN routes. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the next-hop for the service EVPN route | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number route-next-hop ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
system-ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv4 address for service EVPN route next hop | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number route-next-hop system-ipv4 | |
| Tree | system-ipv4 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
system-ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | System IPv6 address for service EVPN route next hop | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number route-next-hop system-ipv6 | |
| Tree | system-ipv6 | |
Notes | The following elements are part of a choice: ip-address, system-ipv4, or system-ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
source-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Source IPv6 address | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number source-address string | |
| Tree | source-address | |
Description | When configured, this command specifies the source IPv6 address used in the SA field of the outer IPv6 header of the SRv6 encapsulated packet. When not configured, the source IPv6 address is inherited from the configuration of the global default address in the router "base" segment-routing segment-routing-v6 source-address context. A source IPv6 address must be configured in this context or in the base router context. The system does not check if the address entered is a valid local address. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
split-horizon-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Split horizon group | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number split-horizon-group reference | |
| Tree | split-horizon-group | |
Description | This command configures the value of split-horizon group for all BGP-EVPN segment routing v6 instances. | |
Reference | configure service vpls string split-horizon-group string | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
srv6
default-locator string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route locator | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number srv6 default-locator string | |
| Tree | default-locator | |
Description | This command specifies the locator that exists in the SRv6 service instance and is used as the default locator for the service. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Segment Routing SRv6 instance | |
| Context | configure service vpls string bgp-evpn segment-routing-v6 number srv6 instance reference | |
| Tree | instance | |
Reference | configure service vpls string segment-routing-v6 number | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
vxlan [bgp-instance] number
[bgp-instance] number
admin-state keyword
| Synopsis | Administrative state of VXLAN auto-bindings creation | |
| Context | configure service vpls string bgp-evpn vxlan number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service vpls string bgp-evpn vxlan number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ecmp number
evi-three-byte-auto-rt boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-derive the BGP EVPN route target | |
| Context | configure service vpls string bgp-evpn vxlan number evi-three-byte-auto-rt boolean | |
| Tree | evi-three-byte-auto-rt | |
Description | When configured to true, the BGP-EVPN instance import and export route target is auto-derived as described in RFC 8365 (Global-Administrator:A/Type/D-ID/Service-ID). Where:
When configured to false, route target derivation is not allowed. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All | |
mh-mode keyword
oper-group reference
| Synopsis | Operational group ID | |
| Context | configure service vpls string bgp-evpn vxlan number oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
| Introduced | 19.10.R1 | |
Platforms | All |
routes
auto-disc
advertise boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Advertise routes on auto-discovery | |
| Context | configure service vpls string bgp-evpn vxlan number routes auto-disc advertise boolean | |
| Tree | advertise | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All | |
send-incl-mcast-ir-on-ndf boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow IMET-IR on NDF | |
| Context | configure service vpls string bgp-evpn vxlan number send-incl-mcast-ir-on-ndf boolean | |
| Tree | send-incl-mcast-ir-on-ndf | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
send-tunnel-encap boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send VXLAN value in encapsulation extended community | |
| Context | configure service vpls string bgp-evpn vxlan number send-tunnel-encap boolean | |
| Tree | send-tunnel-encap | |
Description | When configured to true, this command sends the VXLAN value in the encapsulation that is advertised with the EVPN routes for the service. The encapsulation is encoded in RFC5512-based tunnel encapsulation extended communities. When configured to false, no encapsulation extended community is sent. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
vxlan-instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VXLAN instance | |
| Context | configure service vpls string bgp-evpn vxlan number vxlan-instance reference | |
| Tree | vxlan-instance | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
bgp-mh-site [site-name] string
| Synopsis | Enter the bgp-mh-site list instance | |
| Context | configure service vpls string bgp-mh-site string | |
| Tree | bgp-mh-site | |
| Introduced | 16.0.R1 | |
Platforms | All |
[site-name] string
| Synopsis | Name for the specific site | |
| Context | configure service vpls string bgp-mh-site string | |
| Tree | bgp-mh-site | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
activation-timer number
| Synopsis | Time that the local sites are in standby status, waiting for BGP updates | |
| Context | configure service vpls string bgp-mh-site string activation-timer number | |
| Tree | activation-timer | |
| Range | 0 to 100 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
admin-state keyword
| Synopsis | Administrative state of the VPLS BGP multi-homing site | |
| Context | configure service vpls string bgp-mh-site string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
boot-timer number
| Synopsis | Wait time after reboot to run the DF election algorithm | |
| Context | configure service vpls string bgp-mh-site string boot-timer number | |
| Tree | boot-timer | |
| Range | 0 to 600 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
failed-threshold (number | keyword)
| Synopsis | Threshold for the site to be declared down | |
| Context | configure service vpls string bgp-mh-site string failed-threshold (number | keyword) | |
| Tree | failed-threshold | |
| Range | 1 to 1000 | |
| Options | ||
| Default | all | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Site ID | |
| Context | configure service vpls string bgp-mh-site string id number | |
| Tree | id | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
mesh-sdp-binds
| Synopsis | Specify if a mesh-sdp-binding is associated with this site | |
| Context | configure service vpls string bgp-mh-site string mesh-sdp-binds | |
| Tree | mesh-sdp-binds | |
Notes | The following elements are part of a choice: mesh-sdp-binds, sap, shg-name, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All |
min-down-timer number
| Synopsis | Minimum downtime for BGP multi-homing site after transition from up to down | |
| Context | configure service vpls string bgp-mh-site string min-down-timer number | |
| Tree | min-down-timer | |
| Range | 0 to 100 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
monitor-oper-group reference
| Synopsis | Operational group to monitor | |
| Context | configure service vpls string bgp-mh-site string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
sap string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SAP to be associated with this site | |
| Context | configure service vpls string bgp-mh-site string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
Notes | The following elements are part of a choice: mesh-sdp-binds, sap, shg-name, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
shg-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SHG name to be associated with the site | |
| Context | configure service vpls string bgp-mh-site string shg-name string | |
| Tree | shg-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: mesh-sdp-binds, sap, shg-name, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
spoke-sdp string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SDP associated with the site | |
| Context | configure service vpls string bgp-mh-site string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | The following elements are part of a choice: mesh-sdp-binds, sap, shg-name, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
bgp-vpls
admin-state keyword
| Synopsis | Administrative state of the BGP-VPLS instance | |
| Context | configure service vpls string bgp-vpls admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-ve-id number
| Synopsis | Maximum vpls-edge id for BGP-VPLS | |
| Context | configure service vpls string bgp-vpls maximum-ve-id number | |
| Tree | maximum-ve-id | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ve
id number
name string
capture-sap [sap-id] string
| Synopsis | Enter the capture-sap list instance | |
| Context | configure service vpls string capture-sap string | |
| Tree | capture-sap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP identifier | |
| Context | configure service vpls string capture-sap string | |
| Tree | capture-sap | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service vpls string capture-sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-dot1q-msaps boolean
| Synopsis | Enable support for triggering managed SAP creation | |
| Context | configure service vpls string capture-sap string allow-dot1q-msaps boolean | |
| Tree | allow-dot1q-msaps | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bandwidth number
| Synopsis | SAP bandwidth | |
| Context | configure service vpls string capture-sap string bandwidth number | |
| Tree | bandwidth | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vpls string capture-sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vpls string capture-sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vpls string capture-sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
description string
| Synopsis | Text description | |
| Context | configure service vpls string capture-sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp
| Synopsis | Enter the dhcp context | |
| Context | configure service vpls string capture-sap string dhcp | |
| Tree | dhcp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vpls string capture-sap string dhcp python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database | |
| Context | configure service vpls string capture-sap string dhcp user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
| Synopsis | Enter the dhcp6 context | |
| Context | configure service vpls string capture-sap string dhcp6 | |
| Tree | dhcp6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vpls string capture-sap string dhcp6 python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database | |
| Context | configure service vpls string capture-sap string dhcp6 user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service vpls string capture-sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service vpls string capture-sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service vpls string capture-sap string ingress | |
| Tree | ingress | |
| Introduced | 19.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter
mac reference
| Synopsis | MAC filter policy name | |
| Context | configure service vpls string capture-sap string ingress filter mac reference | |
| Tree | mac | |
Reference | configure filter mac-filter string | |
| Introduced | 19.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session
| Synopsis | Enter the ipoe-session context | |
| Context | configure service vpls string capture-sap string ipoe-session | |
| Tree | ipoe-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IPoE session management | |
| Context | configure service vpls string capture-sap string ipoe-session admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vpls string capture-sap string ipoe-session description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPoE Session policy to be used for new sessions | |
| Context | configure service vpls string capture-sap string ipoe-session ipoe-session-policy reference | |
| Tree | ipoe-session-policy | |
Reference | configure subscriber-mgmt ipoe-session-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for IPoE session authentication | |
| Context | configure service vpls string capture-sap string ipoe-session user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
msap-defaults
| Synopsis | Enter the msap-defaults context | |
| Context | configure service vpls string capture-sap string msap-defaults | |
| Tree | msap-defaults | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-interface string
| Synopsis | Group interface | |
| Context | configure service vpls string capture-sap string msap-defaults group-interface string | |
| Tree | group-interface | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | MSAP policy | |
| Context | configure service vpls string capture-sap string msap-defaults policy reference | |
| Tree | policy | |
Reference | configure subscriber-mgmt msap-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
service-name string
| Synopsis | Administrative service name | |
| Context | configure service vpls string capture-sap string msap-defaults service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nasreq-auth-policy reference
| Synopsis | Diameter NASREQ application policy to use for authentication | |
| Context | configure service vpls string capture-sap string nasreq-auth-policy reference | |
| Tree | nasreq-auth-policy | |
Reference | configure subscriber-mgmt diameter-nasreq-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pfcp
| Synopsis | Enter the pfcp context | |
| Context | configure service vpls string capture-sap string pfcp | |
| Tree | pfcp | |
| Introduced | 20.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
association reference
| Synopsis | Association used for PFCP messages on the capture SAP | |
| Context | configure service vpls string capture-sap string pfcp association reference | |
| Tree | association | |
Description | This command links the capture SAP to a PFCP association. This enables CUPS for the capture SAP and any trigger packets are forwarded to the BNG CUPS CPF. | |
Reference | configure subscriber-mgmt pfcp association string | |
| Introduced | 20.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2-access-id-alias string
| Synopsis | String used as Layer 2 access ID for the capture SAP | |
| Context | configure service vpls string capture-sap string pfcp l2-access-id-alias string | |
| Tree | l2-access-id-alias | |
Description | This command defines a Layer 2 access ID alias for the capture SAP. It replaces the default underlying port-based or LAG-based Layer 2 access ID. Different capture SAPs on the same underlying port or LAG can have different Layer 2 access ID aliases. | |
| String Length | 1 to 32 | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
up-resiliency
| Synopsis | Enter the up-resiliency context | |
| Context | configure service vpls string capture-sap string pfcp up-resiliency | |
| Tree | up-resiliency | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
monitor-oper-group [oper-group] reference
| Synopsis | Enter the monitor-oper-group list instance | |
| Context | configure service vpls string capture-sap string pfcp up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | Commands in this context define parameters to derive the service health based on monitored operational groups. The BNG UPF sends the health value to the BNG CPF. The BNG CPF uses the value to determine the need for a BNG UPF status change (active or standby). Note: The following is only applicable for the configure service vpls capture-sap context.If the configured groups are not the same for all capture SAPs sharing the same underlying port or LAG, the configuration of a Layer 2 access ID alias is required, or else the system chooses arbitrarily one set of configured groups. | |
| Max. Instances | 2 | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[oper-group] reference
| Synopsis | Operational group name | |
| Context | configure service vpls string capture-sap string pfcp up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | This element is part of a list key. | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
health-drop number
| Synopsis | Number subtracted from the health value per failure | |
| Context | configure service vpls string capture-sap string pfcp up-resiliency monitor-oper-group reference health-drop number | |
| Tree | health-drop | |
Description | This command configures the drop in the health value for every operational group member failure. Every failure of an operational group member decreases the base health value to a possible minimum of 0. | |
| Range | 1 to 255 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe
| Synopsis | Enter the pppoe context | |
| Context | configure service vpls string capture-sap string pppoe | |
| Tree | pppoe | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | PPP policy | |
| Context | configure service vpls string capture-sap string pppoe policy reference | |
| Tree | policy | |
Reference | configure subscriber-mgmt ppp-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vpls string capture-sap string pppoe python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database | |
| Context | configure service vpls string capture-sap string pppoe user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-auth-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service vpls string capture-sap string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicit
| Synopsis | Enter the router-solicit context | |
| Context | configure service vpls string capture-sap string router-solicit | |
| Tree | router-solicit | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database | |
| Context | configure service vpls string capture-sap string router-solicit user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
track-srrp number
| Synopsis | SRRP instance that this capture SAP tracks | |
| Context | configure service vpls string capture-sap string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
trigger-packet
| Synopsis | Enter the trigger-packet context | |
| Context | configure service vpls string capture-sap string trigger-packet | |
| Tree | trigger-packet | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arp boolean
| Synopsis | ARP packet | |
| Context | configure service vpls string capture-sap string trigger-packet arp boolean | |
| Tree | arp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
data boolean
| Synopsis | Data packet | |
| Context | configure service vpls string capture-sap string trigger-packet data boolean | |
| Tree | data | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | DHCP packet | |
| Context | configure service vpls string capture-sap string trigger-packet dhcp boolean | |
| Tree | dhcp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp6 boolean
| Synopsis | DHCP6 packet | |
| Context | configure service vpls string capture-sap string trigger-packet dhcp6 boolean | |
| Tree | dhcp6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe boolean
| Synopsis | PPPoE packet | |
| Context | configure service vpls string capture-sap string trigger-packet pppoe boolean | |
| Tree | pppoe | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rtr-solicit boolean
| Synopsis | Router-solicit packet | |
| Context | configure service vpls string capture-sap string trigger-packet rtr-solicit boolean | |
| Tree | rtr-solicit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
customer reference
description string
| Synopsis | Text description | |
| Context | configure service vpls string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
endpoint [name] string
[name] string
block-on-mesh-failure boolean
| Synopsis | Enable blocking after the endpoints are in a down state | |
| Context | configure service vpls string endpoint string block-on-mesh-failure boolean | |
| Tree | block-on-mesh-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string endpoint string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fdb
auto-learn-mac-protect boolean
| Synopsis | Populate automatically MAC protect list with MAC addresses learned on SDP with this endpoint | |
| Context | configure service vpls string endpoint string fdb auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-pinning boolean
| Synopsis | Activate MAC address pinning on this endpoint | |
| Context | configure service vpls string endpoint string fdb mac-pinning boolean | |
| Tree | mac-pinning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-mac-addresses number
| Synopsis | Maximum number of MAC address entries in the FDB | |
| Context | configure service vpls string endpoint string fdb maximum-mac-addresses number | |
| Tree | maximum-mac-addresses | |
Description | This command specifies the maximum number of FDB entries for both learned and static MAC addresses for this endpoint. When the configured limit is reached, no new addresses are learned from the SAP or spoke SDP until at least one FDB entry is aged out or cleared. Packets with unknown source MAC addresses are still forwarded if their destination MAC addresses are known, or flooded if their destination MAC addresses are unknown. However, if the configure service vpls fdb discard-unknown command is set to true, packets with unknown destination MAC addresses are discarded, even if the limit of FDB entries on the specific VPLS instance is not reached. When unconfigured, the endpoint uses the global MAC learning limitations. | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action when a relearn request for a protected MAC is received on the SDP | |
| Context | configure service vpls string endpoint string fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-standby-signaling boolean
| Synopsis | Ignore standby-bit received from TLDP peers when performing internal tasks | |
| Context | configure service vpls string endpoint string ignore-standby-signaling boolean | |
| Tree | ignore-standby-signaling | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mc-endpoint [mc-ep-id] number
| Synopsis | Enter the mc-endpoint list instance | |
| Context | configure service vpls string endpoint string mc-endpoint number | |
| Tree | mc-endpoint | |
| Max. Instances | 1 | |
| Introduced | 22.10.R1 | |
|
Platforms | All |
[mc-ep-id] number
| Synopsis | MC-EP ID | |
| Context | configure service vpls string endpoint string mc-endpoint number | |
| Tree | mc-endpoint | |
Description | This command configures the identifier associated with the MC-EP. The ID must be the same on both MC-EP peers. | |
| Range | 1 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | All |
mc-ep-peer
| Synopsis | Enter the mc-ep-peer context | |
| Context | configure service vpls string endpoint string mc-endpoint number mc-ep-peer | |
| Tree | mc-ep-peer | |
| Introduced | 22.10.R1 | |
Platforms | All |
name string
| Synopsis | Name of the MC-EP peer | |
| Context | configure service vpls string endpoint string mc-endpoint number mc-ep-peer name string | |
| Tree | name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: name or peer-address. | |
| Introduced | 22.10.R1 | |
Platforms | All |
peer-address reference
| Synopsis | IP address of the MC-EP peer | |
| Context | configure service vpls string endpoint string mc-endpoint number mc-ep-peer peer-address reference | |
| Tree | peer-address | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | The following elements are part of a choice: name or peer-address. | |
| Introduced | 22.10.R1 | |
Platforms | All |
revert-time (number | keyword)
| Synopsis | Time to wait before reverting to primary spoke SDP | |
| Context | configure service vpls string endpoint string revert-time (number | keyword) | |
| Tree | revert-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Options | ||
| Default | immediate | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
suppress-standby-signaling boolean
| Synopsis | Do not send pseudowire standby bit to TLDP peer when specified spoke SDP is selected as standby | |
| Context | configure service vpls string endpoint string suppress-standby-signaling boolean | |
| Tree | suppress-standby-signaling | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
eth-cfm
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vpls string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
etree boolean
fdb
discard-unknown boolean
| Synopsis | Discard packets with unknown destination MAC addresses | |
| Context | configure service vpls string fdb discard-unknown boolean | |
| Tree | discard-unknown | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service vpls string fdb mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R1 | |
Platforms | All |
aging boolean
learning boolean
local-age-time number
| Synopsis | Aging time for locally learned MAC addresses | |
| Context | configure service vpls string fdb mac-learning local-age-time number | |
| Tree | local-age-time | |
Description | This command configures the aging time for locally learned MAC addresses in the forwarding database (FDB) for the Virtual Private LAN Service (VPLS) instance. In a VPLS service, MAC addresses are associated with a Service Access Point (SAP) or a Service Distribution Point (SDP). MACs associated with a SAP are classified as local MACs, and MACs associated with an SDP are remote MACs. In each VPLS service instance, there are independent aging timers for locally learned MAC and remotely learned MAC entries in the FDB. As in a Layer 2 switch, learned MACs can be aged out if no packets are sourced from the MAC address for a period of time (the aging time). | |
| Range | 60 to 86400 | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
remote-age-time number
| Synopsis | Aging time for remotely learned MAC addresses | |
| Context | configure service vpls string fdb mac-learning remote-age-time number | |
| Tree | remote-age-time | |
Description | This command configures the aging time for remotely learned MAC addresses in the forwarding database (FDB) for the Virtual Private LAN Service (VPLS) instance. In a VPLS service, MAC addresses are associated with a Service Access Point (SAP) or a Service Distribution Point (SDP). MACs associated with a SAP are classified as local MACs, and MACs associated with an SDP are remote MACs. In each VPLS service instance, there are independent aging timers for locally learned MAC and remotely learned MAC entries in the FDB. As in a Layer 2 switch, learned MACs can be aged out if no packets are sourced from the MAC address for a period of time (the aging time). To reduce the amount of signaling required between switches, configure this time larger than the local-age-time command. | |
| Range | 60 to 86400 | |
| Default | 900 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac-move
admin-state keyword
| Synopsis | Administrative state of MAC move | |
| Context | configure service vpls string fdb mac-move admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-down-time number
| Synopsis | Wait time before re-enabling disabled SAP | |
| Context | configure service vpls string fdb mac-move hold-down-time number | |
| Tree | hold-down-time | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 19.7.R1 | |
Platforms | All |
move-frequency number
| Synopsis | Maximum rate MACs can be re-learned in the VPLS service | |
| Context | configure service vpls string fdb mac-move move-frequency number | |
| Tree | move-frequency | |
| Range | 1 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
primary-cumulative-factor number
| Synopsis | Factor for MAC-relearn periods for MAC-relearn rate | |
| Context | configure service vpls string fdb mac-move primary-cumulative-factor number | |
| Tree | primary-cumulative-factor | |
| Range | 3 to 10 | |
| Default | 3 | |
| Introduced | 19.7.R1 | |
Platforms |
All |
retry-count (number | keyword)
| Synopsis | Number of retries for re-enabling the SAP or SDP | |
| Context | configure service vpls string fdb mac-move retry-count (number | keyword) | |
| Tree | retry-count | |
| Range | 1 to 255 | |
| Options | ||
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
sap [sap-id] reference
[sap-id] reference
level keyword
secondary-cumulative-factor number
| Synopsis | Number of periods to measure mac-relearn rate | |
| Context | configure service vpls string fdb mac-move secondary-cumulative-factor number | |
| Tree | secondary-cumulative-factor | |
| Range | 2 to 9 | |
| Default | 2 | |
| Introduced | 19.7.R1 | |
Platforms |
All |
spoke-sdp [sdp-bind-id] reference
[sdp-bind-id] reference
level keyword
mac-subnet-length number
| Synopsis | Number of bits performing MAC learning or MAC switching | |
| Context | configure service vpls string fdb mac-subnet-length number | |
| Tree | mac-subnet-length | |
| Range | 24 to 48 | |
| Default | 48 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
selective-learning boolean
| Synopsis | Allocate FDB entries on selectively learned line cards | |
| Context | configure service vpls string fdb selective-learning boolean | |
| Tree | selective-learning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static-mac
| Synopsis | Enter the static-mac context | |
| Context | configure service vpls string fdb static-mac | |
| Tree | static-mac | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac [mac-address] string
[mac-address] string
blackhole
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Create a static FDB entry for the MAC address to black-hole traffic | |
| Context | configure service vpls string fdb static-mac mac string blackhole | |
| Tree | blackhole | |
Notes | The following elements are part of a mandatory choice: blackhole, endpoint, mesh-sdp, sap, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
endpoint reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Endpoint associated with the MAC | |
| Context | configure service vpls string fdb static-mac mac string endpoint reference | |
| Tree | endpoint | |
Reference | ||
Notes | The following elements are part of a mandatory choice: blackhole, endpoint, mesh-sdp, sap, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mesh-sdp reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Mesh SDP bind associated with this MAC | |
| Context | configure service vpls string fdb static-mac mac string mesh-sdp reference | |
| Tree | mesh-sdp | |
Reference | ||
Notes | The following elements are part of a mandatory choice: blackhole, endpoint, mesh-sdp, sap, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
monitor keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Entity to be monitored to decide whether this entry can be installed in the FDB | |
| Context | configure service vpls string fdb static-mac mac string monitor keyword | |
| Tree | monitor | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
sap reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | SAP associated with this MAC | |
| Context | configure service vpls string fdb static-mac mac string sap reference | |
| Tree | sap | |
Reference | ||
Notes | The following elements are part of a mandatory choice: blackhole, endpoint, mesh-sdp, sap, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
spoke-sdp reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Spoke SDP bind associated with this MAC | |
| Context | configure service vpls string fdb static-mac mac string spoke-sdp reference | |
| Tree | spoke-sdp | |
Reference | ||
Notes | The following elements are part of a mandatory choice: blackhole, endpoint, mesh-sdp, sap, or spoke-sdp. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
table
high-wmark number
| Synopsis | High watermark for the FDB table | |
| Context | configure service vpls string fdb table high-wmark number | |
| Tree | high-wmark | |
| Range | 0 to 100 | |
| Default | 95 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
low-wmark number
size number
gsmp
admin-state keyword
| Synopsis | Administrative state of GSMP | |
| Context | configure service vpls string gsmp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
group [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the GSMP group | |
| Context | configure service vpls string gsmp group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
ancp
dynamic-topology-discovery boolean
| Synopsis | Enable the ANCP dynamic topology discovery capability | |
| Context | configure service vpls string gsmp group string ancp dynamic-topology-discovery boolean | |
| Tree | dynamic-topology-discovery | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
oam boolean
description string
| Synopsis | Text description | |
| Context | configure service vpls string gsmp group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-multiplier number
| Synopsis | Hold-multiplier for the GSMP connections in this group | |
| Context | configure service vpls string gsmp group string hold-multiplier number | |
| Tree | hold-multiplier | |
| Range | 1 to 100 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
idle-filter boolean
| Synopsis | Filter ANCP messages from IDLE DSL lines | |
| Context | configure service vpls string gsmp group string idle-filter boolean | |
| Tree | idle-filter | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
keepalive number
neighbor [remote-address] string
[remote-address] string
admin-state keyword
| Synopsis | Administrative state of the GSMP neighbor | |
| Context | configure service vpls string gsmp group string neighbor string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string gsmp group string neighbor string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Restrict connections to this local address only within the service running ANCP | |
| Context | configure service vpls string gsmp group string neighbor string local-address string | |
| Tree | local-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
priority-marking
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the priority-marking context | |
| Context | configure service vpls string gsmp group string neighbor string priority-marking | |
| Tree | priority-marking | |
| Introduced | 16.0.R1 | |
Platforms | All | |
dscp keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DSCP that is used while remarking the in profile packets | |
| Context | configure service vpls string gsmp group string neighbor string priority-marking dscp keyword | |
| Tree | dscp | |
| Options | ||
Notes |
The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
prec number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Precedence priority marking | |
| Context | configure service vpls string gsmp group string neighbor string priority-marking prec number | |
| Tree | prec | |
| Range | 0 to 7 | |
Notes | The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
persistency boolean
| Synopsis | Store DSL line information when the GSMP connection terminates | |
| Context | configure service vpls string gsmp group string persistency boolean | |
| Tree | persistency | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service vpls string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IGMP host tracking | |
| Context | configure service vpls string igmp-host-tracking admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service vpls string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 260 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of snooping | |
| Context | configure service vpls string igmp-snooping admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-proxy
| Synopsis | Enter the evpn-proxy context | |
| Context | configure service vpls string igmp-snooping evpn-proxy | |
| Tree | evpn-proxy | |
| Introduced | 20.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of EVPN proxy | |
| Context | configure service vpls string igmp-snooping evpn-proxy admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | All |
mvr
| Synopsis | Enter the mvr context | |
| Context | configure service vpls string igmp-snooping mvr | |
| Tree | mvr | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MVR | |
| Context | configure service vpls string igmp-snooping mvr admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string igmp-snooping mvr description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-policy string
| Synopsis | Policy that applies MVR | |
| Context | configure service vpls string igmp-snooping mvr group-policy string | |
| Tree | group-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string igmp-snooping query-interval number | |
| Tree | query-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-source-address (keyword | ipv4-address)
| Synopsis | Source address for IGMP queries | |
| Context | configure service vpls string igmp-snooping query-source-address (keyword | ipv4-address) | |
| Tree | query-source-address | |
| Options | ||
| Default | system | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
report-source-address string
| Synopsis | Source IP address used when generating IGMP reports | |
| Context | configure service vpls string igmp-snooping report-source-address string | |
| Tree | report-source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string igmp-snooping robust-count number | |
| Tree | robust-count | |
| Range | 1 to 255 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ignore-l2vpn-mtu-mismatch boolean
| Synopsis | Ignore the L2 VPN MTU mismatch with local service MTU | |
| Context | configure service vpls string ignore-l2vpn-mtu-mismatch boolean | |
| Tree | ignore-l2vpn-mtu-mismatch | |
Description | When configured to true, the router does not check the value of the Layer 2 MTU in the Layer2 Info Extended Community received in a BGP update message against the local service MTU or locally signaled MTU. It may, therefore, bring up the BGP VPLS service regardless of any MTU mismatch. When configured to false, an MTU mismatch prevents the system from bringing up a BGP-VPLS service. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vpls string interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-time
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service vpls string interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vpls string interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vpls string interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
ipv4
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vpls string interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor [ipv4-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service vpls string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | IPv4 address that corresponds to the physical address | |
| Context | configure service vpls string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service vpls string interface string ipv4 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
primary
address string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vpls string interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 31 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac string
isid-policy
| Synopsis | Enter the isid-policy context | |
| Context | configure service vpls string isid-policy | |
| Tree | isid-policy | |
| Introduced | 19.10.R1 | |
Platforms | All |
entry [range-entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure service vpls string isid-policy entry number | |
| Tree | entry | |
| Introduced | 19.10.R1 | |
Platforms | All |
[range-entry-id] number
| Synopsis | ISID policy entry ID | |
| Context | configure service vpls string isid-policy entry number | |
| Tree | entry | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
advertise-local boolean
| Synopsis | Advertise locally-defined I-VPLS ISIDs or static ISIDs | |
| Context | configure service vpls string isid-policy entry number advertise-local boolean | |
| Tree | advertise-local | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
range
end number
start number
use-def-mcast boolean
| Synopsis | Use default multicast tree to propagate ISIS range | |
| Context | configure service vpls string isid-policy entry number use-def-mcast boolean | |
| Tree | use-def-mcast | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
load-balancing
| Synopsis | Enter the load-balancing context | |
| Context | configure service vpls string load-balancing | |
| Tree | load-balancing | |
| Introduced | 16.0.R1 | |
Platforms | All |
lbl-eth-or-ip-l4-teid boolean
| Synopsis | Enable hashing of MPLS ethernet and IP packets on SAPs | |
| Context | configure service vpls string load-balancing lbl-eth-or-ip-l4-teid boolean | |
| Tree | lbl-eth-or-ip-l4-teid | |
Description | When configured to true, this command enables hashing of MPLS Ethernet and MPLS IP packets received on the Epipe and VPLS service SAP using the MPLS labels, the inner IP addresses, the port numbers, and the GTP TEID field, if read by the system. This capability is supported on line cards that are FP4-based and later. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
per-service-hashing boolean
| Synopsis | Enable per-service hashing for Ethernet services | |
| Context | configure service vpls string load-balancing per-service-hashing boolean | |
| Tree | per-service-hashing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
spi-load-balancing boolean
| Synopsis | Allow use of SPI (Security Parameter Index) in hashing for ESP/AH encrypted IPv4/IPv6 traffic | |
| Context | configure service vpls string load-balancing spi-load-balancing boolean | |
| Tree | spi-load-balancing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
teid-load-balancing boolean
| Synopsis | Include TEID in hashing algorithm for GTP-U/C encapsulated traffic | |
| Context | configure service vpls string load-balancing teid-load-balancing boolean | |
| Tree | teid-load-balancing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
m-vpls boolean
mac-flush
tldp
propagate boolean
send-on-failure boolean
| Synopsis | Send MAC withdraw message on SAP/Spoke-SDP failure | |
| Context | configure service vpls string mac-flush tldp send-on-failure boolean | |
| Tree | send-on-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-protect
| Synopsis | Enter the mac-protect context | |
| Context | configure service vpls string mac-protect | |
| Tree | mac-protect | |
| Introduced | 19.10.R1 | |
Platforms | All |
mac [mac-address] string
| Synopsis | Add a list entry for mac | |
| Context | configure service vpls string mac-protect mac string | |
| Tree | mac | |
| Introduced | 19.10.R1 | |
Platforms | All |
[mac-address] string
| Synopsis | Protected MAC address | |
| Context | configure service vpls string mac-protect mac string | |
| Tree | mac | |
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
mcast-ipv6-snooping-scope keyword
| Synopsis | IPv6 multicast snooping scope | |
| Context | configure service vpls string mcast-ipv6-snooping-scope keyword | |
| Tree | mcast-ipv6-snooping-scope | |
| Options | ||
| Default | mac-based | |
| Introduced | 16.0.R1 | |
Platforms | All |
mcr-default-gtw
| Synopsis | Enter the mcr-default-gtw context | |
| Context | configure service vpls string mcr-default-gtw | |
| Tree | mcr-default-gtw | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip string
| Synopsis | Multi-chassis ring default gateway IP address | |
| Context | configure service vpls string mcr-default-gtw ip string | |
| Tree | ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac string
| Synopsis | Multi-chassis ring default gateway MAC address | |
| Context | configure service vpls string mcr-default-gtw mac string | |
| Tree | mac | |
| Default | 00:00:00:00:00:00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
mesh-sdp [sdp-bind-id] string
[sdp-bind-id] string
accounting-policy reference
| Synopsis | Policy to collect accounting statistics | |
| Context | configure service vpls string mesh-sdp string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service vpls string mesh-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vpls string mesh-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service vpls string mesh-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
collect-stats boolean
| Synopsis | Allow agent to collect accounting statistics | |
| Context | configure service vpls string mesh-sdp string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service vpls string mesh-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vpls string mesh-sdp string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vpls string mesh-sdp string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vpls string mesh-sdp string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vpls string mesh-sdp string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vpls string mesh-sdp string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vpls string mesh-sdp string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string mesh-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dhcp
description string
| Synopsis | Text description | |
| Context | configure service vpls string mesh-sdp string dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
snoop boolean
egress
filter
ip reference
ipv6 reference
mac reference
mfib-allowed-mda-destinations
| Synopsis | Enter the mfib-allowed-mda-destinations context | |
| Context | configure service vpls string mesh-sdp string egress mfib-allowed-mda-destinations | |
| Tree | mfib-allowed-mda-destinations | |
| Introduced | 16.0.R4 | |
Platforms | All |
mda [mda-id] string
[mda-id] string
qos
network
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service vpls string mesh-sdp string egress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service vpls string mesh-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service vpls string mesh-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service vpls string mesh-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service vpls string mesh-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vpls string mesh-sdp string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vpls string mesh-sdp string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vpls string mesh-sdp string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vpls string mesh-sdp string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais
| Synopsis | Enable the ais context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais | |
| Tree | ais | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
client-meg-level number
| Synopsis | Client MEG level for AIS message generation | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais client-meg-level number | |
| Tree | client-meg-level | |
| Range | 1 to 7 | |
| Max. Instances | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interface-support boolean
| Synopsis | Enable generation of AIS PDUs based on endpoint state | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interface-support boolean | |
| Tree | interface-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
| Synopsis | Transmission interval for AIS messages | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interval number | |
| Tree | interval | |
| Range | 1 | 60 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | all-def | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Priority of the AIS messages generated by the node | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
| Synopsis | Enable the csf context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
direction keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Direction the MEP faces | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number direction keyword | |
| Tree | direction | |
| Options | ||
| Default | down | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lbm-svc-act-responder boolean
| Synopsis | Process service activation streams in ETH-CFM LBM | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number lbm-svc-act-responder boolean | |
| Tree | lbm-svc-act-responder | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MEP provisioned using MA primary VLAN ID | |
| Context | configure service vpls string mesh-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number primary-vlan boolean | |
| Tree | primary-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
mip primary-vlan (number | keyword)
primary-vlan (number | keyword)
| Synopsis | VLAN ID to which the MIP is attached | |
| Context | configure service vpls string mesh-sdp string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command provides an option for linking a MIP with a Primary VLAN number or none. When the none option is provided, the MIP does not include the primary vlan. | |
| Range | 1 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string mesh-sdp string eth-cfm mip primary-vlan (number | keyword) cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MIP | |
| Context | configure service vpls string mesh-sdp string eth-cfm mip primary-vlan (number | keyword) mac-address string | |
| Tree | mac-address | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-ctag-levels number
| Synopsis | Squelch levels using additional VLAN C-Tag space | |
| Context | configure service vpls string mesh-sdp string eth-cfm squelch-ingress-ctag-levels number | |
| Tree | squelch-ingress-ctag-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding plus an additional VLAN, up to a maximum tag length of two tags. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level to be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 21.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vpls string mesh-sdp string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vmep-filter boolean
| Synopsis | Suppress eth-cfm PDUs based on level lower than or equal to configured Virtual MEP | |
| Context | configure service vpls string mesh-sdp string eth-cfm vmep-filter boolean | |
| Tree | vmep-filter | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
etree-leaf boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable etree leaf access-circuit status | |
| Context | configure service vpls string mesh-sdp string etree-leaf boolean | |
| Tree | etree-leaf | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
etree-root-leaf-tag boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Status for E-tree root leaf tag | |
| Context | configure service vpls string mesh-sdp string etree-root-leaf-tag boolean | |
| Tree | etree-root-leaf-tag | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
fdb
auto-learn-mac-protect boolean
| Synopsis | Enable automatic population of the MAC protect list | |
| Context | configure service vpls string mesh-sdp string fdb auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
auto-learn-mac-protect-exclude-list reference
| Synopsis | Referenced MAC protect exclusion list name | |
| Context | configure service vpls string mesh-sdp string fdb auto-learn-mac-protect-exclude-list reference | |
| Tree | auto-learn-mac-protect-exclude-list | |
Description | This command references the name of a MAC protect exclusion list. Dynamically-learned MAC Source Addresses (SA) are protected if they are learned on an object with ALMP configured and no exclusion list is associated with the object, or if the MAC SA does not match any entry in an associated exclusion list. An exclusion list can be used in multiple objects of a service. If a list is empty, ALMP does not exclude any learned MAC SAs from protection on the object. | |
Reference | ||
| Introduced | 20.5.R1 | |
Platforms | All |
mac-pinning boolean
| Synopsis | MAC address pinning in active status | |
| Context | configure service vpls string mesh-sdp string fdb mac-pinning boolean | |
| Tree | mac-pinning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action to take whenever a relearn request for a protected MAC is received | |
| Context | configure service vpls string mesh-sdp string fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms | All |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service vpls string mesh-sdp string force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service vpls string mesh-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service vpls string mesh-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string mesh-sdp string igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string mesh-sdp string igmp-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string mesh-sdp string igmp-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-group-sources number
| Synopsis | Maximum group source combinations | |
| Context | configure service vpls string mesh-sdp string igmp-snooping maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string mesh-sdp string igmp-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-sources number
| Synopsis | Maximum sources that are allowed per group | |
| Context | configure service vpls string mesh-sdp string igmp-snooping maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vpls string mesh-sdp string igmp-snooping mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vpls string mesh-sdp string igmp-snooping mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string mesh-sdp string igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string mesh-sdp string igmp-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string mesh-sdp string igmp-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string mesh-sdp string igmp-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string mesh-sdp string igmp-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string mesh-sdp string igmp-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string mesh-sdp string igmp-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
| Synopsis | Group address of static IGMP multicast channel | |
| Context | configure service vpls string mesh-sdp string igmp-snooping static group string | |
| Tree | group | |
Description | This command configures an address that receives data on an interface. The IP address must be unique for each static group. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
version keyword
ingress
filter
ip reference
ipv6 reference
mac reference
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vpls string mesh-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service vpls string mesh-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service vpls string mesh-sdp string ingress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service vpls string mesh-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string mesh-sdp string mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string mesh-sdp string mld-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string mesh-sdp string mld-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string mesh-sdp string mld-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string mesh-sdp string mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string mesh-sdp string mld-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string mesh-sdp string mld-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string mesh-sdp string mld-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string mesh-sdp string mld-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string mesh-sdp string mld-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string mesh-sdp string mld-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
source [source-address] string
[source-address] string
starg
version keyword
mrp
join-time number
leave-all-time number
| Synopsis | Frequency of LeaveAll PDUs by LeaveAll state machine | |
| Context | configure service vpls string mesh-sdp string mrp leave-all-time number | |
| Tree | leave-all-time | |
| Range | 60 to 300 | |
| Units | deciseconds | |
| Default | 100 | |
| Introduced | 20.10.R1 | |
Platforms | All |
leave-time number
| Synopsis | Time in LV state before transition to MT state | |
| Context | configure service vpls string mesh-sdp string mrp leave-time number | |
| Tree | leave-time | |
| Range | 30 to 60 | |
| Units | deciseconds | |
| Default | 30 | |
| Introduced | 20.10.R1 | |
Platforms | All |
periodic-time number
| Synopsis | Frequency of periodic events generated by state machine | |
| Context | configure service vpls string mesh-sdp string mrp periodic-time number | |
| Tree | periodic-time | |
| Range | 10 to 100 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 20.10.R1 | |
Platforms | All |
periodic-timer boolean
| Synopsis | Enable the Periodic Transmission Timer | |
| Context | configure service vpls string mesh-sdp string mrp periodic-timer boolean | |
| Tree | periodic-timer | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
policy reference
pbb
fault-propagation
| Synopsis | Enter the fault-propagation context | |
| Context | configure service vpls string mesh-sdp string pbb fault-propagation | |
| Tree | fault-propagation | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-address [address] string
| Synopsis | Add a list entry for backbone-mac-address | |
| Context | configure service vpls string mesh-sdp string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
| Introduced | 20.10.R1 | |
Platforms | All |
[address] string
| Synopsis | Backbone MAC address | |
| Context | configure service vpls string mesh-sdp string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-name [name] reference
| Synopsis | Add a list entry for backbone-mac-name | |
| Context | configure service vpls string mesh-sdp string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
| Introduced | 20.10.R1 | |
Platforms | All |
[name] reference
| Synopsis | Backbone MAC address name | |
| Context | configure service vpls string mesh-sdp string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
vc-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Type of virtual circuit (VC) associated with the SDP binding; VPLS not supported | |
| Context | configure service vpls string mesh-sdp string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All | |
vlan-vc-tag number
| Synopsis | SDP bind VC tag | |
| Context | configure service vpls string mesh-sdp string vlan-vc-tag number | |
| Tree | vlan-vc-tag | |
| Range | 0 to 4094 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mfib
table
high-wmark number
| Synopsis | High watermark for the MFIB table | |
| Context | configure service vpls string mfib table high-wmark number | |
| Tree | high-wmark | |
| Range | 0 to 100 | |
| Default | 95 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
low-wmark number
size number
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of snooping | |
| Context | configure service vpls string mld-snooping admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-proxy
| Synopsis | Enter the evpn-proxy context | |
| Context | configure service vpls string mld-snooping evpn-proxy | |
| Tree | evpn-proxy | |
| Introduced | 20.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of EVPN proxy | |
| Context | configure service vpls string mld-snooping evpn-proxy admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | All |
mvr
| Synopsis | Enter the mvr context | |
| Context | configure service vpls string mld-snooping mvr | |
| Tree | mvr | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MVR | |
| Context | configure service vpls string mld-snooping mvr admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string mld-snooping mvr description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-policy string
| Synopsis | Policy that applies MVR | |
| Context | configure service vpls string mld-snooping mvr group-policy string | |
| Tree | group-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string mld-snooping query-interval number | |
| Tree | query-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-source-address (keyword | ipv6-address)
| Synopsis | Source IP address used in MLD queries | |
| Context | configure service vpls string mld-snooping query-source-address (keyword | ipv6-address) | |
| Tree | query-source-address | |
| Options | ||
| Default | system | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
report-source-address string
| Synopsis | Source IP address used when generating MLD reports | |
| Context | configure service vpls string mld-snooping report-source-address string | |
| Tree | report-source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string mld-snooping robust-count number | |
| Tree | robust-count | |
| Range | 1 to 255 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mrp
admin-state keyword
| Synopsis | Administrative state of MRP | |
| Context | configure service vpls string mrp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | All |
mmrp
admin-state keyword
| Synopsis | Administrative state of MMRP | |
| Context | configure service vpls string mrp mmrp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
All |
attribute-table
| Synopsis | Enter the attribute-table context | |
| Context | configure service vpls string mrp mmrp attribute-table | |
| Tree | attribute-table | |
| Introduced | 20.10.R1 | |
Platforms | All |
high-wmark number
| Synopsis | High watermark for the MMRP attribute table | |
| Context | configure service vpls string mrp mmrp attribute-table high-wmark number | |
| Tree | high-wmark | |
| Range | 0 to 100 | |
| Default | 95 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
low-wmark number
size number
end-station-only boolean
| Synopsis | Prevent generation or processing of MMRP messages | |
| Context | configure service vpls string mrp mmrp end-station-only boolean | |
| Tree | end-station-only | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
flood-time number
| Synopsis | Time when traffic is flooded after status change | |
| Context | configure service vpls string mrp mmrp flood-time number | |
| Tree | flood-time | |
| Range | 3 to 600 | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
multicast-info-policy reference
| Synopsis | Multicast information policy | |
| Context | configure service vpls string multicast-info-policy reference | |
| Tree | multicast-info-policy | |
Reference | configure multicast-management multicast-info-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
pbb
backbone-vpls [backbone-vpls-service-name] reference
| Synopsis | Enter the backbone-vpls list instance | |
| Context | configure service vpls string pbb backbone-vpls reference | |
| Tree | backbone-vpls | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[backbone-vpls-service-name] reference
| Synopsis | Service name | |
| Context | configure service vpls string pbb backbone-vpls reference | |
| Tree | backbone-vpls | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fdb
protected-src-mac-violation-action keyword
| Synopsis | Action taken upon a relearn request for protected MAC | |
| Context | configure service vpls string pbb backbone-vpls reference fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 20.5.R1 | |
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-destination [mac-reference] reference
| Synopsis | Add a list entry for mrouter-destination | |
| Context | configure service vpls string pbb backbone-vpls reference igmp-snooping mrouter-destination reference | |
| Tree | mrouter-destination | |
| Introduced | 16.0.R1 | |
Platforms | All |
[mac-reference] reference
| Synopsis | Mac name reference | |
| Context | configure service vpls string pbb backbone-vpls reference igmp-snooping mrouter-destination reference | |
| Tree | mrouter-destination | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
isid number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Backbone VPLS ISID | |
| Context | configure service vpls string pbb backbone-vpls reference isid number | |
| Tree | isid | |
| Range | 0 to 16777215 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mesh-sdp [sdp-bind-id] reference
[sdp-bind-id] reference
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference mesh-sdp reference igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference mesh-sdp reference igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference mesh-sdp reference mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference mesh-sdp reference mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-destination [mac-reference] reference
| Synopsis | Add a list entry for mrouter-destination | |
| Context | configure service vpls string pbb backbone-vpls reference mld-snooping mrouter-destination reference | |
| Tree | mrouter-destination | |
| Introduced | 16.0.R1 | |
Platforms | All |
[mac-reference] reference
| Synopsis | Mac name reference | |
| Context | configure service vpls string pbb backbone-vpls reference mld-snooping mrouter-destination reference | |
| Tree | mrouter-destination | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
sap [sap-id] reference
[sap-id] reference
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference sap reference igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference sap reference igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference sap reference mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference sap reference mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
spoke-sdp [sdp-bind-id] reference
[sdp-bind-id] reference
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference spoke-sdp reference igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference spoke-sdp reference igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string pbb backbone-vpls reference spoke-sdp reference mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string pbb backbone-vpls reference spoke-sdp reference mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
force-qtag-forwarding boolean
| Synopsis | Add an IEEE 802.1q tag after C-MAC addresses PBB header | |
| Context | configure service vpls string pbb force-qtag-forwarding boolean | |
| Tree | force-qtag-forwarding | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
i-vpls-mac-flush
| Synopsis | Enter the i-vpls-mac-flush context | |
| Context | configure service vpls string pbb i-vpls-mac-flush | |
| Tree | i-vpls-mac-flush | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-evpn
send-to-bvpls boolean
| Synopsis | Send b-VPLS EVPN flush | |
| Context | configure service vpls string pbb i-vpls-mac-flush bgp-evpn send-to-bvpls boolean | |
| Tree | send-to-bvpls | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tldp
propagate-from-bvpls boolean
| Synopsis | Propagate MAC flush message from B-VPLS into local I-VPLS | |
| Context | configure service vpls string pbb i-vpls-mac-flush tldp propagate-from-bvpls boolean | |
| Tree | propagate-from-bvpls | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-on-bvpls-failure boolean
| Synopsis | Send negative flush message (flush-all-from-me) on B-VPLS failure | |
| Context | configure service vpls string pbb i-vpls-mac-flush tldp send-on-bvpls-failure boolean | |
| Tree | send-on-bvpls-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-to-bvpls
| Synopsis | Enter the send-to-bvpls context | |
| Context | configure service vpls string pbb i-vpls-mac-flush tldp send-to-bvpls | |
| Tree | send-to-bvpls | |
| Introduced | 16.0.R1 | |
Platforms | All |
all-but-mine boolean
| Synopsis | Generate LDP MAC withdraw message to b-VPLS | |
| Context | configure service vpls string pbb i-vpls-mac-flush tldp send-to-bvpls all-but-mine boolean | |
| Tree | all-but-mine | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
all-from-me boolean
| Synopsis | Generate LDP MAC withdraw all from me message to b-VPLS | |
| Context | configure service vpls string pbb i-vpls-mac-flush tldp send-to-bvpls all-from-me boolean | |
| Tree | all-from-me | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-notification
| Synopsis | Enter the mac-notification context | |
| Context | configure service vpls string pbb mac-notification | |
| Tree | mac-notification | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MAC notification messages | |
| Context | configure service vpls string pbb mac-notification admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
count number
interval number
renotify (number | keyword)
source-bmac
| Synopsis | Enter the source-bmac context | |
| Context | configure service vpls string pbb source-bmac | |
| Tree | source-bmac | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
use-es-bmac-lsb boolean
| Synopsis | Use LSB from Ethernet-segment backbone MAC | |
| Context | configure service vpls string pbb source-bmac use-es-bmac-lsb boolean | |
| Tree | use-es-bmac-lsb | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
use-mclag-bmac-lsb boolean
| Synopsis | Use MC LAG backbone MAC LSB | |
| Context | configure service vpls string pbb source-bmac use-mclag-bmac-lsb boolean | |
| Tree | use-mclag-bmac-lsb | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pbb-type keyword
pim-snooping
| Synopsis | Enable the pim-snooping context | |
| Context | configure service vpls string pim-snooping | |
| Tree | pim-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-policy string
| Synopsis | Group policy name | |
| Context | configure service vpls string pim-snooping group-policy string | |
| Tree | group-policy | |
| String Length | 1 to 255 | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-time number
| Synopsis | Duration that allows the PIM-snooping switch to snoop all the PIM states in the VPLS | |
| Context | configure service vpls string pim-snooping hold-time number | |
| Tree | hold-time | |
| Range | 0 to 300 | |
| Units | seconds | |
| Default | 90 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vpls string pim-snooping ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of snooping for multicast traffic | |
| Context | configure service vpls string pim-snooping ipv4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
ipv6
| Synopsis | Enter the ipv6 context | |
| Context | configure service vpls string pim-snooping ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of snooping for multicast traffic | |
| Context | configure service vpls string pim-snooping ipv6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
provider-tunnel
| Synopsis | Enable the provider-tunnel context | |
| Context | configure service vpls string provider-tunnel | |
| Tree | provider-tunnel | |
| Introduced | 19.7.R1 | |
Platforms | All |
inclusive
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the inclusive context | |
| Context | configure service vpls string provider-tunnel inclusive | |
| Tree | inclusive | |
| Introduced | 19.7.R1 | |
Platforms | All | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of P2MP LSP as the I-PMSI | |
| Context | configure service vpls string provider-tunnel inclusive admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | All | |
data-delay-interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | I-PMSI data delay timer | |
| Context | configure service vpls string provider-tunnel inclusive data-delay-interval number | |
| Tree | data-delay-interval | |
| Range | 3 to 180 | |
| Units | seconds | |
| Default | 15 | |
| Introduced | 19.7.R1 | |
Platforms | All | |
mldp
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable/Disable MLDP | |
| Context | configure service vpls string provider-tunnel inclusive mldp | |
| Tree | mldp | |
Notes | The following elements are part of a choice: mldp or rsvp. | |
| Introduced | 19.7.R1 | |
Platforms | All | |
owner keyword
root-and-leaf boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Configure whether the provider tunnel acts as a leaf or both a root and leaf | |
| Context | configure service vpls string provider-tunnel inclusive root-and-leaf boolean | |
| Tree | root-and-leaf | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All | |
rsvp
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the rsvp context | |
| Context | configure service vpls string provider-tunnel inclusive rsvp | |
| Tree | rsvp | |
Notes | The following elements are part of a choice: mldp or rsvp. | |
| Introduced | 19.7.R1 | |
Platforms | All | |
lsp-template reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Configure LSP template name | |
| Context | configure service vpls string provider-tunnel inclusive rsvp lsp-template reference | |
| Tree | lsp-template | |
Reference | configure router string mpls lsp-template string | |
| Introduced | 19.7.R1 | |
Platforms | All | |
selective
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the selective context | |
| Context | configure service vpls string provider-tunnel selective | |
| Tree | selective | |
| Introduced | 23.3.R1 | |
Platforms | All | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the selective provider tunnel | |
| Context | configure service vpls string provider-tunnel selective admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 23.3.R1 | |
Platforms | All | |
data-delay-interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | S-PMSI data delay timer | |
| Context | configure service vpls string provider-tunnel selective data-delay-interval number | |
| Tree | data-delay-interval | |
Description | This command configures the S-PMSI data delay timer. The data delay interval determines the time the router takes to switch over the traffic from the Ingress Replication binds to the wildcard S-PMSI or from the wildcard S-PMSI to the S-PMSI, after the S-PMSI is created. This time should account for the time it takes for BGP to propagate the S-PMSI A-D route to the downstream PEs and the time it takes the downstream PEs to join the tree all the way up to the root. | |
| Range | 3 to 180 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 23.3.R1 | |
Platforms | All | |
data-threshold
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the data-threshold context | |
| Context | configure service vpls string provider-tunnel selective data-threshold | |
| Tree | data-threshold | |
Description | Commands in this context specify the data rate threshold that triggers the switch from the inclusive provider tunnel to the selective provider tunnel for (C-S, C-G) within the group range. Optionally, PE thresholds to create or delete ng-MVPN S-PMSI may also be specified. Omitting the PE thresholds preserves the currently set value (or defaults if never set). Multiple statements (one per a unique group) are allowed in the configuration. This command is not applicable to multistream S-PMSI. This command for S-PMSI trees can also be used in EVPN services. The command options are used in the same way as in MVPN when applied to EVPN, in particular the rate and PE thresholds. | |
| Introduced | 23.3.R1 | |
Platforms | All | |
group-prefix [ip-group-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the group-prefix list instance | |
| Context | configure service vpls string provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
| Introduced | 23.3.R1 | |
Platforms | All |
[ip-group-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Multicast group prefix | |
| Context | configure service vpls string provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 23.3.R1 | |
Platforms | All |
pe-threshold-add number
| Synopsis | Number of receiver PEs for S-PMSI tunnel creation | |
| Context | configure service vpls string provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) pe-threshold-add number | |
| Tree | pe-threshold-add | |
Description | This command specifies the number of Receiver PEs for creating S-PMSI. A S-PMSI is created when the following apply:
| |
| Range | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 23.3.R1 | |
Platforms |
All |
pe-threshold-delete number
| Synopsis | Number of receiver PEs for S-PMSI tunnel deletion | |
| Context | configure service vpls string provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) pe-threshold-delete number | |
| Tree | pe-threshold-delete | |
Description | This command specifies the number of Receiver PEs to delete S-PMSI. When the number of receiver PEs for a multicast group configuration is above the threshold, S-PMSI is deleted and the multicast group is moved to IR or a wildcard S-PMSI. Nokia recommends that the delete threshold be configured to be significantly larger than the add threshold to avoid re-signaling of S-PMSI as the Receiver PE count fluctuates | |
| Range | 2 to 65535 | |
| Default | 65535 | |
| Introduced | 23.3.R1 | |
Platforms |
All |
threshold number
| Synopsis | Threshold rate for a group prefix | |
| Context | configure service vpls string provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) threshold number | |
| Tree | threshold | |
Description | This command specifies the threshold rate for a group prefix. If the rate for a (C-S, C-G) within the specified group range exceeds the threshold, traffic for the (C-S, C-G) is switched to the selective provider tunnel. | |
| Range | 0 to 4294967294 | |
| Units | kilobps | |
|
Notes | This element is mandatory. | |
| Introduced | 23.3.R1 | |
Platforms | All |
maximum-p2mp-spmsi number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of P2MP S-PMSIi tunnels | |
| Context | configure service vpls string provider-tunnel selective maximum-p2mp-spmsi number | |
| Tree | maximum-p2mp-spmsi | |
Description | This command specifies the maximum number of S-PMSI tunnels for the EVPN service. When the limit is reached, no more RSVP P2MP S-PMSI or LDP P2MP S-PMSI are created and traffic over the data threshold value stays on I-PMSI | |
| Range | 1 to 4000 | |
| Default | 10 | |
| Introduced | 23.3.R1 | |
Platforms |
All | |
mldp boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MLDP | |
| Context | configure service vpls string provider-tunnel selective mldp boolean | |
| Tree | mldp | |
Description | When configured to true, this command enables the use of MLDP as a protocol for an LDP P2MP LSP that is used for forwarding Broadcast, Unicast unknown, and Multicast (BUM) packets of a VPLS or B-VPLS instance. This command is also used used for forwarding IP multicast packets of an EVPN VPLS or R-VPLS service. When configured to false, this command disables the use of MLDP as a protocol to set up the P2MP LSP. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All | |
owner keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Provider-tunnel selective owner | |
| Context | configure service vpls string provider-tunnel selective owner keyword | |
| Tree | owner | |
Description | This command selects the owner protocol of the S-PMSI tunnel in the service. The owner must be explicitly set before the provider tunnel can be enabled. | |
| Options | ||
| Introduced | 23.3.R1 | |
Platforms | All | |
wildcard-spmsi boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable wildcard S-PMSI support | |
| Context | configure service vpls string provider-tunnel selective wildcard-spmsi boolean | |
| Tree | wildcard-spmsi | |
Description | When configured to true, the system enables RFC 6625 (C-*, C-*) S-PMSI functionality for EVPN VPLS or R-VPLS services. When enabled, (C-*, C-*) S-PMSI is used instead of I-PMSI for this EVPN VPLS or RVPLS service. The configure service vprn pim rp auto-rp-discovery command and this command are mutually exclusive. When configured to false, the system disables the (C-*, C-*) S-PMSI functionality. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All | |
proxy-arp
admin-state keyword
| Synopsis | Administrative state of the proxy | |
| Context | configure service vpls string proxy-arp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
age-time (number | keyword)
duplicate-detect
| Synopsis | Enter the duplicate-detect context | |
| Context | configure service vpls string proxy-arp duplicate-detect | |
| Tree | duplicate-detect | |
| Introduced | 16.0.R1 | |
Platforms | All |
anti-spoof-mac string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | MAC address to replace the proxy-ARP/ND offending entry's MAC | |
| Context | configure service vpls string proxy-arp duplicate-detect anti-spoof-mac string | |
| Tree | anti-spoof-mac | |
| Introduced | 16.0.R1 | |
Platforms | All | |
hold-down-time (number | keyword)
| Synopsis | Hold down time for a duplicate entry | |
| Context | configure service vpls string proxy-arp duplicate-detect hold-down-time (number | keyword) | |
| Tree | hold-down-time | |
| Range | 2 to 60 | |
| Units | minutes | |
| Options | ||
| Default | 9 | |
| Introduced | 16.0.R1 | |
Platforms | All |
num-moves number
static-blackhole boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Consider anti-spoof MAC as black-hole static MAC in FDB | |
| Context | configure service vpls string proxy-arp duplicate-detect static-blackhole boolean | |
| Tree | static-blackhole | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
window number
dynamic-arp
| Synopsis | Enter the dynamic-arp context | |
| Context | configure service vpls string proxy-arp dynamic-arp | |
| Tree | dynamic-arp | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address [ipv4-address] string
| Synopsis | Enter the ip-address list instance | |
| Context | configure service vpls string proxy-arp dynamic-arp ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | Proxy ARP IPv4 address | |
| Context | configure service vpls string proxy-arp dynamic-arp ip-address string | |
| Tree | ip-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-list reference
| Synopsis | MAC list for the dynamic entry | |
| Context | configure service vpls string proxy-arp dynamic-arp ip-address string mac-list reference | |
| Tree | mac-list | |
Reference | configure service proxy-arp-nd mac-list list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
resolve-retry-time number
| Synopsis | Frequency at which the resolve messages are sent | |
| Context | configure service vpls string proxy-arp dynamic-arp ip-address string resolve-retry-time number | |
| Tree | resolve-retry-time | |
| Range | 1 to 60 | |
| Units | minutes | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dynamic-populate boolean
| Synopsis | Populate proxy ARP entries from snooped GARP/ARP/ND messages on SAPs/SDP-bindings | |
| Context | configure service vpls string proxy-arp dynamic-populate boolean | |
| Tree | dynamic-populate | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
evpn
flood
gratuitous-arp boolean
| Synopsis | Flood GARP-requests/GARP-replies to the EVPN | |
| Context | configure service vpls string proxy-arp evpn flood gratuitous-arp boolean | |
| Tree | gratuitous-arp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
unknown-arp-req boolean
| Synopsis | Flood ARP-requests (with source squelching) if there is no active proxy-ARP entry for requested IP | |
| Context | configure service vpls string proxy-arp evpn flood unknown-arp-req boolean | |
| Tree | unknown-arp-req | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-tag number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Route tag used on export policies to match MAC/IP routes generated by proxy-ARP or proxy-ND module | |
| Context | configure service vpls string proxy-arp evpn route-tag number | |
| Tree | route-tag | |
| Range | 0 | 1 to 255 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
process-arp-probes boolean
| Synopsis | Enable replies to DAD ARP probes | |
| Context | configure service vpls string proxy-arp process-arp-probes boolean | |
| Tree | process-arp-probes | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
send-refresh (number | keyword)
| Synopsis | Time at which to send a refresh message | |
| Context | configure service vpls string proxy-arp send-refresh (number | keyword) | |
| Tree | send-refresh | |
| Range | 120 to 86400 | |
| Options | ||
| Default | never | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static-arp
| Synopsis | Enter the static-arp context | |
| Context | configure service vpls string proxy-arp static-arp | |
| Tree | static-arp | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address [ipv4-address] string
| Synopsis | Enter the ip-address list instance | |
| Context | configure service vpls string proxy-arp static-arp ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | Proxy ARP IPv4 address | |
| Context | configure service vpls string proxy-arp static-arp ip-address string | |
| Tree | ip-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac string
| Synopsis | Proxy ARP MAC address for static entry | |
| Context | configure service vpls string proxy-arp static-arp ip-address string mac string | |
| Tree | mac | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
table-size number
| Synopsis | Maximum number of learned and static entries allowed in the proxy table of this service | |
| Context | configure service vpls string proxy-arp table-size number | |
| Tree | table-size | |
| Range | 1 to 16383 | |
| Default | 250 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
proxy-nd
admin-state keyword
| Synopsis | Administrative state of the proxy | |
| Context | configure service vpls string proxy-nd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
age-time (number | keyword)
duplicate-detect
| Synopsis | Enter the duplicate-detect context | |
| Context | configure service vpls string proxy-nd duplicate-detect | |
| Tree | duplicate-detect | |
| Introduced | 16.0.R1 | |
Platforms | All |
anti-spoof-mac string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | MAC address to replace the proxy-ARP/ND offending entry's MAC | |
| Context | configure service vpls string proxy-nd duplicate-detect anti-spoof-mac string | |
| Tree | anti-spoof-mac | |
| Introduced | 16.0.R1 | |
Platforms | All | |
hold-down-time (number | keyword)
| Synopsis | Hold down time for a duplicate entry | |
| Context | configure service vpls string proxy-nd duplicate-detect hold-down-time (number | keyword) | |
| Tree | hold-down-time | |
| Range | 2 to 60 | |
| Units | minutes | |
| Options | ||
| Default | 9 | |
| Introduced | 16.0.R1 | |
Platforms | All |
num-moves number
static-blackhole boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Consider anti-spoof MAC as black-hole static MAC in FDB | |
| Context | configure service vpls string proxy-nd duplicate-detect static-blackhole boolean | |
| Tree | static-blackhole | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
window number
dynamic-neighbor
| Synopsis | Enter the dynamic-neighbor context | |
| Context | configure service vpls string proxy-nd dynamic-neighbor | |
| Tree | dynamic-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address [ipv6-address] string
| Synopsis | Enter the ip-address list instance | |
| Context | configure service vpls string proxy-nd dynamic-neighbor ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-address] string
| Synopsis | Proxy ND IPv6 address | |
| Context | configure service vpls string proxy-nd dynamic-neighbor ip-address string | |
| Tree | ip-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-list reference
| Synopsis | MAC list for the dynamic entry | |
| Context | configure service vpls string proxy-nd dynamic-neighbor ip-address string mac-list reference | |
| Tree | mac-list | |
Reference | configure service proxy-arp-nd mac-list list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
resolve-retry-time number
| Synopsis | Frequency at which the resolve messages are sent | |
| Context | configure service vpls string proxy-nd dynamic-neighbor ip-address string resolve-retry-time number | |
| Tree | resolve-retry-time | |
| Range | 1 to 60 | |
| Units | minutes | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dynamic-populate boolean
| Synopsis | Populate proxy ARP entries from snooped GARP/ARP/ND messages on SAPs/SDP-bindings | |
| Context | configure service vpls string proxy-nd dynamic-populate boolean | |
| Tree | dynamic-populate | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
evpn
advertise-neighbor-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Advertisement type of static or dynamic entries in EVPN | |
| Context | configure service vpls string proxy-nd evpn advertise-neighbor-type keyword | |
| Tree | advertise-neighbor-type | |
Description | This command enables the advertisement of static or dynamic entries that are learned as host, router, or host and router (only one option is possible in a specified service). It also determines the R flag (host or router) when sending Neighbor Advertisement (NA) messages for existing EVPN entries in the proxy-ND table. The router-host command option is only possible when the ARP/ND extended community is advertised along with the MAC/IP routes. It determines that both host and router (dynamic and static) entries are advertised in MAC/IP routes, with an indication whether the entry is host or router in the R flag. These EVPN entries are installed as host or router entries depending on the R flag of the route, and NA messages for them are sent with the proper host or router indication. | |
| Options | ||
| Default | router | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
flood
unknown-neighbor-advertise-host boolean
| Synopsis | Flood host unsolicited Neighbor Advertisement (NA) replies to EVPN | |
| Context | configure service vpls string proxy-nd evpn flood unknown-neighbor-advertise-host boolean | |
| Tree | unknown-neighbor-advertise-host | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
unknown-neighbor-advertise-router boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Flood router unsolicited Neighbor Advertisement (NA) replies to EVPN | |
| Context | configure service vpls string proxy-nd evpn flood unknown-neighbor-advertise-router boolean | |
| Tree | unknown-neighbor-advertise-router | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
unknown-neighbor-solicitation boolean
| Synopsis | Flood unsolicited Neighbor Solicitation messages (with source squelching) into EVPN network | |
| Context | configure service vpls string proxy-nd evpn flood unknown-neighbor-solicitation boolean | |
| Tree | unknown-neighbor-solicitation | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-tag number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Route tag used on export policies to match MAC/IP routes generated by proxy-ARP or proxy-ND module | |
| Context | configure service vpls string proxy-nd evpn route-tag number | |
| Tree | route-tag | |
| Range | 0 | 1 to 255 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
process-dad-neighbor-solicitations boolean
| Synopsis | Enable replies to DAD neighbor solicitations | |
| Context | configure service vpls string proxy-nd process-dad-neighbor-solicitations boolean | |
| Tree | process-dad-neighbor-solicitations | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
send-refresh (number | keyword)
| Synopsis | Time at which to send a refresh message | |
| Context | configure service vpls string proxy-nd send-refresh (number | keyword) | |
| Tree | send-refresh | |
| Range | 120 to 86400 | |
| Options | ||
| Default | never | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static-neighbor
| Synopsis | Enter the static-neighbor context | |
| Context | configure service vpls string proxy-nd static-neighbor | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address [ipv6-address] string
| Synopsis | Enter the ip-address list instance | |
| Context | configure service vpls string proxy-nd static-neighbor ip-address string | |
| Tree | ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-address] string
| Synopsis | Proxy ND IPv6 address | |
| Context | configure service vpls string proxy-nd static-neighbor ip-address string | |
| Tree | ip-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac string
| Synopsis | Proxy ARP MAC address for static entry | |
| Context | configure service vpls string proxy-nd static-neighbor ip-address string mac string | |
| Tree | mac | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
type keyword
| Synopsis | Entry type | |
| Context | configure service vpls string proxy-nd static-neighbor ip-address string type keyword | |
| Tree | type | |
| Options | ||
| Default | router | |
| Introduced | 16.0.R1 | |
Platforms | All |
table-size number
| Synopsis | Maximum number of learned and static entries allowed in the proxy table of this service | |
| Context | configure service vpls string proxy-nd table-size number | |
| Tree | table-size | |
| Range | 1 to 16383 | |
| Default | 250 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
routed-vpls
| Synopsis | Enable the routed-vpls context | |
| Context | configure service vpls string routed-vpls | |
| Tree | routed-vpls | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-mpls-ecmp boolean
| Synopsis | Enable ECMP behavior on R-VPLS services | |
| Context | configure service vpls string routed-vpls evpn-mpls-ecmp boolean | |
| Tree | evpn-mpls-ecmp | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
multicast
| Synopsis | Enter the multicast context | |
| Context | configure service vpls string routed-vpls multicast | |
| Tree | multicast | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-gateway
| Synopsis | Enable the evpn-gateway context | |
| Context | configure service vpls string routed-vpls multicast evpn-gateway | |
| Tree | evpn-gateway | |
| Introduced | 21.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the multicast EVPN gateway | |
| Context | configure service vpls string routed-vpls multicast evpn-gateway admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | All |
advertise keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Type of the multicast EVPN gateway | |
| Context | configure service vpls string routed-vpls multicast evpn-gateway advertise keyword | |
| Tree | advertise | |
Description | This command configures EVPN OISM to advertise the type of OISM gateway function in the Inclusive Multicast Ethernet Tag routes. | |
| Options | ||
| Default | mvpn-pim | |
| Introduced | 21.10.R1 | |
|
Platforms | All | |
dr-activation-timer number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DR activation timer for the EVPN gateway | |
| Context | configure service vpls string routed-vpls multicast evpn-gateway dr-activation-timer number | |
| Tree | dr-activation-timer | |
Description | This command configures the the designated router (DR) activation timer for the EVPN gateway. After the DR activation timer expires, each provider edge router (PE) runs the MEG or PEG DR election. The timer allows the PE to collect Inclusive Multicast Ethernet Tag routes from other MEG or PEG gateways and avoids running the DR election multiple times. | |
| Range | 0 to 100 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms | All | |
non-dr-attract-traffic keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multicast traffic attraction option on non-DR router GW | |
| Context | configure service vpls string routed-vpls multicast evpn-gateway non-dr-attract-traffic keyword | |
| Tree | non-dr-attract-traffic | |
| Options | ||
| Default | from-pim-mvpn | |
| Introduced | 21.10.R1 | |
Platforms |
All | |
ip-multicast-ecmp boolean
| Synopsis | ECMP behaviour for multicast traffic on bgp-evpn mpls and vxlan | |
| Context | configure service vpls string routed-vpls multicast ip-multicast-ecmp boolean | |
| Tree | ip-multicast-ecmp | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
ipv4
forward-to-ip-interface boolean
| Synopsis | Forward IPv4 multicast from RVPLS to L3 interface | |
| Context | configure service vpls string routed-vpls multicast ipv4 forward-to-ip-interface boolean | |
| Tree | forward-to-ip-interface | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string routed-vpls multicast ipv4 igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate VPLS L3 interface as a multicast router port | |
| Context | configure service vpls string routed-vpls multicast ipv4 igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6
forward-to-ip-interface boolean
| Synopsis | Forward IPv6 multicast from RVPLS to L3 interface | |
| Context | configure service vpls string routed-vpls multicast ipv6 forward-to-ip-interface boolean | |
| Tree | forward-to-ip-interface | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string routed-vpls multicast ipv6 mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate VPLS L3 interface as a multicast router port | |
| Context | configure service vpls string routed-vpls multicast ipv6 mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
vxlan-ipv4-tep-ecmp boolean
| Synopsis | Use ECMP on VXLAN IPv4 destinations for R-VPLS services | |
| Context | configure service vpls string routed-vpls vxlan-ipv4-tep-ecmp boolean | |
| Tree | vxlan-ipv4-tep-ecmp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap [sap-id] string
[sap-id] string
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service vpls string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service vpls string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
anti-spoof keyword
| Synopsis | Type of anti-spoof filtering | |
| Context | configure service vpls string sap string anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service vpls string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
arp-host
admin-state keyword
| Synopsis | Administrative state of ARP hosts | |
| Context | configure service vpls string sap string arp-host admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-limit number
| Synopsis | Maximum number of ARP triggered hosts | |
| Context | configure service vpls string sap string arp-host host-limit number | |
| Tree | host-limit | |
| Range | 1 to 131071 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-auth-interval number
| Synopsis | Minimum authentication interval | |
| Context | configure service vpls string sap string arp-host min-auth-interval number | |
| Tree | min-auth-interval | |
| Range | 1 to 6000 | |
| Units | minutes | |
| Default | 15 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arp-reply-agent keyword
| Synopsis | Enable arp-reply-agent function | |
| Context | configure service vpls string sap string arp-reply-agent keyword | |
| Tree | arp-reply-agent | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
bandwidth number
bgp-vpls-mh-veid number
| Synopsis | BGP-VPLS multi-homing VE-ID | |
| Context | configure service vpls string sap string bgp-vpls-mh-veid number | |
| Tree | bgp-vpls-mh-veid | |
Description | This command specifies a VE ID that is configured on SAPs that are part of an EVPN single-active Ethernet Segment. The configuration of this command allows the advertisement of L2VPN routes that indicate the state of multi-homed SAPs to the remote BGP-VPLS PEs, which can trigger a MAC flush operation on the service to avoid traffic from being blackholed when a failure occurs in the active PE. When unconfigured from the SAP, L2VPN routes are withdrawn, which causes MAC flush processing on the remote BGP-VPLS. | |
| Range | 1 to 65535 | |
| Introduced | 20.5.R1 | |
|
Platforms | All |
bpdu-translation keyword
| Synopsis | Bpdu translation on this SAP | |
| Context | configure service vpls string sap string bpdu-translation keyword | |
| Tree | bpdu-translation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
calling-station-id string
| Synopsis | Calling station ID | |
| Context | configure service vpls string sap string calling-station-id string | |
| Tree | calling-station-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cflowd boolean
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service vpls string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vpls string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vpls string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vpls string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vpls string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vpls string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vpls string sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dhcp
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service vpls string sap string dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string sap string dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service vpls string sap string dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases | |
| Context | configure service vpls string sap string dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 0 to 131071 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service vpls string sap string dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action keyword
circuit-id
| Synopsis | Enter the circuit-id context | |
| Context | configure service vpls string sap string dhcp option-82 circuit-id | |
| Tree | circuit-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-tuple
| Synopsis | Use the ASCII-encoded tuple for the circuit ID | |
| Context | configure service vpls string sap string dhcp option-82 circuit-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, hex-string, none, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hex-string string
| Synopsis | User-defined hexadeciaml value of the option | |
| Context | configure service vpls string sap string dhcp option-82 circuit-id hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 66 | |
Notes | The following elements are part of a choice: ascii-tuple, hex-string, none, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
none
vlan-ascii-tuple
| Synopsis | Include the VLAN ID and dot1p bits in the ASCII tuple | |
| Context | configure service vpls string sap string dhcp option-82 circuit-id vlan-ascii-tuple | |
| Tree | vlan-ascii-tuple | |
Description | When configured, the router includes the VLAN ID and dot1p bits with the ASCII-tuple information. This only occurs on dot1q and QinQ-encapsulated ports. When the Option 82 bits are stripped, dot1p bits are copied to the Ethernet header of the outgoing packet. When unconfigured, the router leaves the circuit ID sub-option of the DHCP packet empty. | |
Notes | The following elements are part of a choice: ascii-tuple, hex-string, none, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-id
| Synopsis | Enter the remote-id context | |
| Context | configure service vpls string sap string dhcp option-82 remote-id | |
| Tree | remote-id | |
Description | Commands in this context configure the remote IP sub-option of the DHCP packet with the identity of the remote host end (typically the DHCP client). | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-string string
| Synopsis | User-defined ASCII string for the remote ID | |
| Context | configure service vpls string sap string dhcp option-82 remote-id ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ascii-string, hex-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hex-string string
| Synopsis | Option as a hexadecimal string | |
| Context | configure service vpls string sap string dhcp option-82 remote-id hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 66 | |
Notes | The following elements are part of a choice: ascii-string, hex-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac
none
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service vpls string sap string dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service vpls string sap string dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap-id boolean
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service vpls string sap string dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
string string
system-id boolean
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vpls string sap string dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service vpls string sap string dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
emulated-server string
| Synopsis | IP address used as DHCP server address in SAP context | |
| Context | configure service vpls string sap string dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service vpls string sap string dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service vpls string sap string dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
value number
| Synopsis | DHCP lease time | |
| Context | configure service vpls string sap string dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
snoop boolean
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service vpls string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service vpls string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service vpls string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service vpls string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service vpls string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate number
dest-mac-rewrite string
| Synopsis | Destination MAC overwrite for unicast | |
| Context | configure service vpls string sap string egress dest-mac-rewrite string | |
| Tree | dest-mac-rewrite | |
| Introduced | 16.0.R5 | |
Platforms | All |
filter
ip reference
ipv6 reference
mac reference
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vpls string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service vpls string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service vpls string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service vpls string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service vpls string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vpls string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service vpls string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service vpls string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
hs-secondary-shaper string
| Synopsis | HS Secondary Shaper | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-secondary-shaper string | |
| Tree | hs-secondary-shaper | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] reference
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] reference
| Synopsis | HS WRR group identifier | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
Reference | configure qos sap-egress string hs-wrr-group number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Class weight override of the WRR group | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-wrr-group reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Percent rate override applied to the HS WRR group | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-wrr-group reference percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Scheduling rate override applied to the HS WRR group | |
| Context | configure service vpls string sap string egress qos sap-egress overrides hs-wrr-group reference rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
|
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service vpls string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service vpls string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vpls string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vpls string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service vpls string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service vpls string sap string egress qos sap-egress port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the queue group redirect list policy | |
| Context | configure service vpls string sap string egress qos sap-egress port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance of port queue group | |
| Context | configure service vpls string sap string egress qos sap-egress port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vpls string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service vpls string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service vpls string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vpls string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vpls string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vpls string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vpls string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vpls string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais
| Synopsis | Enable the ais context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais | |
| Tree | ais | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
client-meg-level number
| Synopsis | Client MEG level for AIS message generation | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais client-meg-level number | |
| Tree | client-meg-level | |
| Range | 1 to 7 | |
| Max. Instances | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interface-support boolean
| Synopsis | Enable generation of AIS PDUs based on endpoint state | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interface-support boolean | |
| Tree | interface-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
| Synopsis | Transmission interval for AIS messages | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interval number | |
| Tree | interval | |
| Range | 1 | 60 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | all-def | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Priority of the AIS messages generated by the node | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
| Synopsis | Enable the csf context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
direction keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Direction the MEP faces | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number direction keyword | |
| Tree | direction | |
| Options | ||
| Default | down | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lbm-svc-act-responder boolean
| Synopsis | Process service activation streams in ETH-CFM LBM | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number lbm-svc-act-responder boolean | |
| Tree | lbm-svc-act-responder | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MEP provisioned using MA primary VLAN ID | |
| Context | configure service vpls string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number primary-vlan boolean | |
| Tree | primary-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
mip primary-vlan (number | keyword)
primary-vlan (number | keyword)
| Synopsis | VLAN ID to which the MIP is attached | |
| Context | configure service vpls string sap string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command provides an option for linking a MIP with a Primary VLAN number or none. When the none option is provided, the MIP does not include the primary vlan. | |
| Range | 1 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string sap string eth-cfm mip primary-vlan (number | keyword) cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MIP | |
| Context | configure service vpls string sap string eth-cfm mip primary-vlan (number | keyword) mac-address string | |
| Tree | mac-address | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-ctag-levels number
| Synopsis | Squelch levels using additional VLAN C-Tag space | |
| Context | configure service vpls string sap string eth-cfm squelch-ingress-ctag-levels number | |
| Tree | squelch-ingress-ctag-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding plus an additional VLAN, up to a maximum tag length of two tags. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level to be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 21.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vpls string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vmep-filter boolean
| Synopsis | Suppress eth-cfm PDUs based on level lower than or equal to configured Virtual MEP | |
| Context | configure service vpls string sap string eth-cfm vmep-filter boolean | |
| Tree | vmep-filter | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ring number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Ethernet ring operation | |
| Context | configure service vpls string sap string eth-ring number | |
| Tree | eth-ring | |
| Range | 1 to 128 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
etree-leaf boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable etree leaf access-circuit status | |
| Context | configure service vpls string sap string etree-leaf boolean | |
| Tree | etree-leaf | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
etree-root-leaf-tag
| Synopsis | Enable the etree-root-leaf-tag context | |
| Context | configure service vpls string sap string etree-root-leaf-tag | |
| Tree | etree-root-leaf-tag | |
| Introduced | 16.0.R1 | |
Platforms | All |
leaf number
fdb
auto-learn-mac-protect boolean
| Synopsis | Enable automatic update of MAC protect list | |
| Context | configure service vpls string sap string fdb auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
auto-learn-mac-protect-exclude-list reference
| Synopsis | Referenced MAC protect exclusion list | |
| Context | configure service vpls string sap string fdb auto-learn-mac-protect-exclude-list reference | |
| Tree | auto-learn-mac-protect-exclude-list | |
Description | This command references the name of a MAC protect exclusion list. Dynamically-learned MAC Source Addresses (SA) are protected if they are learned on an object with ALMP configured and no exclusion list is associated with the object, or if the MAC SA does not match any entry in an associated exclusion list. An exclusion list can be used in multiple objects of a service. If a list is empty, ALMP does not exclude any learned MAC SAs from protection on the object. | |
Reference | ||
| Introduced | 20.5.R1 | |
Platforms | All |
discard-unknown-source boolean
| Synopsis | Discard frames with unknown source | |
| Context | configure service vpls string sap string fdb discard-unknown-source boolean | |
| Tree | discard-unknown-source | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
discard-unprotected-dest-mac boolean
| Synopsis | Discard packet with unprotected destination MAC address | |
| Context | configure service vpls string sap string fdb discard-unprotected-dest-mac boolean | |
| Tree | discard-unprotected-dest-mac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit-mac-move keyword
| Synopsis | MAC move | |
| Context | configure service vpls string sap string fdb limit-mac-move keyword | |
| Tree | limit-mac-move | |
| Options | ||
| Default | blockable | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service vpls string sap string fdb mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R1 | |
Platforms | All |
aging boolean
learning boolean
mac-pinning boolean
| Synopsis | Enable MAC address pinning on this SAP | |
| Context | configure service vpls string sap string fdb mac-pinning boolean | |
| Tree | mac-pinning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-mac-addresses number
| Synopsis | Maximum number of MAC address entries in the FDB | |
| Context | configure service vpls string sap string fdb maximum-mac-addresses number | |
| Tree | maximum-mac-addresses | |
Description | This command specifies the maximum number of FDB entries for both learned and static MAC addresses for this SAP. When the configured limit is reached, no new addresses are learned from the SAP or spoke SDP until at least one FDB entry is aged out or cleared. When the configured limit is reached and the configure service pw-template fdb discard-unknown-source command is set to true for this SAP, packets with unknown source MAC addresses are discarded. If discard-unknown-source is set to false, the packets are forwarded if their destination MAC addresses are known, or flooded if their destination MAC addresses are unknown. However, if the configure service vpls fdb discard-unknown command is set to true, packets with unknown destination MAC addresses are discarded, even if the limit of FDB entries on the specific VPLS instance is not reached. When unconfigured, the SAP uses the global MAC learning limitations. | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action to take whenever a relearn request for a protected MAC is received | |
| Context | configure service vpls string sap string fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
host-admin-state keyword
| Synopsis | Administrative state of the hosts | |
| Context | configure service vpls string sap string host-admin-state keyword | |
| Tree | host-admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service vpls string sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
i-vpls-mac-flush
| Synopsis | Enter the i-vpls-mac-flush context | |
| Context | configure service vpls string sap string i-vpls-mac-flush | |
| Tree | i-vpls-mac-flush | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-evpn
send-to-bvpls boolean
| Synopsis | Send B-VPLS EVPN flush | |
| Context | configure service vpls string sap string i-vpls-mac-flush bgp-evpn send-to-bvpls boolean | |
| Tree | send-to-bvpls | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service vpls string sap string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service vpls string sap string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string sap string igmp-host-tracking import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of multicast groups to track per group | |
| Context | configure service vpls string sap string igmp-host-tracking maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of multicast groups to be tracked | |
| Context | configure service vpls string sap string igmp-host-tracking maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of multicast sources to be tracked | |
| Context | configure service vpls string sap string igmp-host-tracking maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable IGMP router alert check option | |
| Context | configure service vpls string sap string igmp-host-tracking router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string sap string igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string sap string igmp-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string sap string igmp-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-group-sources number
| Synopsis | Maximum group source combinations | |
| Context | configure service vpls string sap string igmp-snooping maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string sap string igmp-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-sources number
| Synopsis | Maximum sources that are allowed per group | |
| Context | configure service vpls string sap string igmp-snooping maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vpls string sap string igmp-snooping mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
mc-constraints
| Synopsis | Enter the mc-constraints context | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints | |
| Tree | mc-constraints | |
| Introduced | 16.0.R1 | |
Platforms | All |
level [level-id] number
| Synopsis | Enter the level list instance | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints level number | |
| Tree | level | |
| Introduced | 16.0.R1 | |
Platforms | All |
[level-id] number
| Synopsis | Bandwidth level ID for an MCAC constraint | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints level number | |
| Tree | level | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bandwidth number
| Synopsis | Bandwidth available for this level | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints level number bandwidth number | |
| Tree | bandwidth | |
| Range | 0 to 2147483647 | |
| Units | kilobps | |
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
number-down [number-lag-port-down] number
| Synopsis | Enter the number-down list instance | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints number-down number | |
| Tree | number-down | |
| Introduced | 16.0.R1 | |
Platforms | All |
[number-lag-port-down] number
| Synopsis | Number of ports that are down in this LAG link | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints number-down number | |
| Tree | number-down | |
| Range | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
level number
| Synopsis | Level ID to associate with number of down LAG ports | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints number-down number level number | |
| Tree | level | |
Description | This command specifies the bandwidth for a given level. Level 1 has the highest priority and level 8 has the lowest priority. | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-lag-port-weight boolean
| Synopsis | Use LAG port weight in calculating MCAC constraints | |
| Context | configure service vpls string sap string igmp-snooping mcac mc-constraints use-lag-port-weight boolean | |
| Tree | use-lag-port-weight | |
Description | When configured to true, port weight is used when determining available bandwidth per level when LAG ports go down or come up. This command is required for proper operation on mixed port-speed LAGs and can also be used for unmixed port-speed LAGs. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vpls string sap string igmp-snooping mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string sap string igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mvr
from-vpls reference
to-sap string
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string sap string igmp-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string sap string igmp-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string sap string igmp-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string sap string igmp-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string sap string igmp-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string sap string igmp-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
| Synopsis | Group address of static IGMP multicast channel | |
| Context | configure service vpls string sap string igmp-snooping static group string | |
| Tree | group | |
Description | This command configures an address that receives data on an interface. The IP address must be unique for each static group. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
version keyword
ingress
filter
ip reference
ipv6 reference
mac reference
qos
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service vpls string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vpls string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service vpls string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service vpls string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service vpls string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service vpls string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vpls string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service vpls string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vpls string sap string ingress qos sap-ingress fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Queue group template name created on forwarding plane | |
| Context | configure service vpls string sap string ingress qos sap-ingress fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance | |
| Context | configure service vpls string sap string ingress qos sap-ingress fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overrides
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv4 criteria | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides ip-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv6 criteria | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides ipv6-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vpls string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service vpls string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service vpls string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vpls string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service vpls string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service vpls string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vpls string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
qtag-manipulation
| Synopsis | Enter the qtag-manipulation context | |
| Context | configure service vpls string sap string ingress qtag-manipulation | |
| Tree | qtag-manipulation | |
| Introduced | 16.0.R1 | |
Platforms | All |
c-tag (number | keyword)
| Synopsis | Inner ingress vlan translation for two service delimiting vlan values | |
| Context | configure service vpls string sap string ingress qtag-manipulation c-tag (number | keyword) | |
| Tree | c-tag | |
| Range | 0 to 4094 | |
| Options | ||
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 22.10.R1 | |
Platforms | All |
push-dot1q-vlan (number | keyword)
| Synopsis | VLAN translation information | |
| Context | configure service vpls string sap string ingress qtag-manipulation push-dot1q-vlan (number | keyword) | |
| Tree | push-dot1q-vlan | |
| Range | 0 to 4094 | |
| Options | ||
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 16.0.R1 | |
Platforms | All |
s-tag number
| Synopsis | Outer ingress VLAN translation for two service delimiting VLAN values | |
| Context | configure service vpls string sap string ingress qtag-manipulation s-tag number | |
| Tree | s-tag | |
| Range | 0 to 4094 | |
Notes | The following elements are part of a choice: push-dot1q-vlan or (c-tag and s-tag). | |
| Introduced | 22.10.R1 | |
Platforms | All |
l2pt
force-boundary
| Synopsis | Enable the force-boundary context | |
| Context | configure service vpls string sap string l2pt force-boundary | |
| Tree | force-boundary | |
| Introduced | 16.0.R1 | |
Platforms | All |
protocols
cdp boolean
dtp boolean
pagp boolean
stp boolean
udld boolean
vtp boolean
termination
| Synopsis | Enable the termination context | |
| Context | configure service vpls string sap string l2pt termination | |
| Tree | termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
protocols
cdp boolean
dtp boolean
pagp boolean
stp boolean
udld boolean
vtp boolean
l2tpv3-session
| Synopsis | Enable the l2tpv3-session context | |
| Context | configure service vpls string sap string l2tpv3-session | |
| Tree | l2tpv3-session | |
| Introduced | 16.0.R4 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the session for the service | |
| Context | configure service vpls string sap string l2tpv3-session admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | All |
pseudo-wire
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the pseudo-wire context | |
| Context | configure service vpls string sap string l2tpv3-session pseudo-wire | |
| Tree | pseudo-wire | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ethernet
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the Ethernet PW-type for the L2TPv3 session | |
| Context | configure service vpls string sap string l2tpv3-session pseudo-wire ethernet | |
| Tree | ethernet | |
Notes | The following elements are part of a choice: ethernet or ethernet-vlan-id. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
ethernet-vlan-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ethernet-VLAN PW-type ID for the L2TPv3 session | |
| Context | configure service vpls string sap string l2tpv3-session pseudo-wire ethernet-vlan-id number | |
| Tree | ethernet-vlan-id | |
| Range | 0 to 4095 | |
Notes | The following elements are part of a choice: ethernet or ethernet-vlan-id. | |
| Introduced | 16.0.R4 | |
Platforms | All | |
router
group string
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router name used to identify the router instance | |
| Context | configure service vpls string sap string l2tpv3-session router router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R4 | |
Platforms | All | |
vc-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VC ID for the L2TPv3 session | |
| Context | configure service vpls string sap string l2tpv3-session vc-id number | |
| Tree | vc-id | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R4 | |
Platforms | All | |
lag
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service vpls string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service vpls string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | All |
class number
weight number
managed-vlan-list
| Synopsis | Enter the managed-vlan-list context | |
| Context | configure service vpls string sap string managed-vlan-list | |
| Tree | managed-vlan-list | |
| Introduced | 19.10.R1 | |
Platforms | All |
range [vlan-range] string
[vlan-range] string
mc-ring
ring-node string
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string sap string mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string sap string mld-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string sap string mld-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string sap string mld-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string sap string mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mvr
from-vpls reference
to-sap string
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string sap string mld-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string sap string mld-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string sap string mld-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string sap string mld-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string sap string mld-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string sap string mld-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
source [source-address] string
[source-address] string
starg
version keyword
monitor-oper-group reference
| Synopsis | Monitor operational group | |
| Context | configure service vpls string sap string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrp
join-time number
leave-all-time number
| Synopsis | Frequency that LeaveAll PDUs are generated | |
| Context | configure service vpls string sap string mrp leave-all-time number | |
| Tree | leave-all-time | |
| Range | 60 to 300 | |
| Default | 100 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
leave-time number
| Synopsis | Time in leave state before transitioning to MT state | |
| Context | configure service vpls string sap string mrp leave-time number | |
| Tree | leave-time | |
| Range | 30 to 60 | |
| Default | 30 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
periodic-time number
| Synopsis | Frequency of periodic events generation | |
| Context | configure service vpls string sap string mrp periodic-time number | |
| Tree | periodic-time | |
| Range | 10 to 100 | |
| Default | 10 | |
| Introduced | 20.10.R1 | |
Platforms |
All |
periodic-timer boolean
| Synopsis | Enable the periodic transmission timer | |
| Context | configure service vpls string sap string mrp periodic-timer boolean | |
| Tree | periodic-timer | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
policy reference
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service vpls string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | All |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service vpls string sap string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
pbb
fault-propagation
| Synopsis | Enter the fault-propagation context | |
| Context | configure service vpls string sap string pbb fault-propagation | |
| Tree | fault-propagation | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-address [address] string
| Synopsis | Add a list entry for backbone-mac-address | |
| Context | configure service vpls string sap string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
| Introduced | 20.10.R1 | |
Platforms | All |
[address] string
| Synopsis | Backbone MAC address | |
| Context | configure service vpls string sap string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-name [name] reference
| Synopsis | Add a list entry for backbone-mac-name | |
| Context | configure service vpls string sap string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
| Introduced | 20.10.R1 | |
Platforms | All |
[name] reference
| Synopsis | Backbone MAC address name | |
| Context | configure service vpls string sap string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
pim-snooping
| Synopsis | Enter the pim-snooping context | |
| Context | configure service vpls string sap string pim-snooping | |
| Tree | pim-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups for this interface | |
| Context | configure service vpls string sap string pim-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
process-cpm-traffic-on-sap-down boolean
| Synopsis | Process CPM traffic on SAP down event | |
| Context | configure service vpls string sap string process-cpm-traffic-on-sap-down boolean | |
| Tree | process-cpm-traffic-on-sap-down | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
radius-auth-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service vpls string sap string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy-ipv4 reference
| Synopsis | Subscriber host connectivity verification policy for IPv4 | |
| Context | configure service vpls string sap string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
spb
admin-state keyword
| Synopsis | Admin state | |
| Context | configure service vpls string sap string spb admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | All |
level [id] number
[id] number
hello-interval number
| Synopsis | Hello interval | |
| Context | configure service vpls string sap string spb level number hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 20000 | |
| Units | seconds | |
| Default | 9 | |
| Introduced | 21.10.R1 | |
Platforms | All |
hello-multiplier number
| Synopsis | Hello multiplier | |
| Context | configure service vpls string sap string spb level number hello-multiplier number | |
| Tree | hello-multiplier | |
| Range | 2 to 100 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
metric number
lsp-pacing-interval number
| Synopsis | Lsp pacing interval | |
| Context | configure service vpls string sap string spb lsp-pacing-interval number | |
| Tree | lsp-pacing-interval | |
| Range | 0 to 65535 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms | All |
retransmit-interval number
| Synopsis | Retransmit interval | |
| Context | configure service vpls string sap string spb retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 21.10.R1 | |
Platforms | All |
split-horizon-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Split horizon group | |
| Context | configure service vpls string sap string split-horizon-group reference | |
| Tree | split-horizon-group | |
Reference | configure service vpls string split-horizon-group string | |
| Introduced | 16.0.R1 | |
Platforms | All | |
static-host
| Synopsis | Enter the static-host context | |
| Context | configure service vpls string sap string static-host | |
| Tree | static-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4 [ip] string mac string
[ip] string
mac string
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service vpls string sap string static-host ipv4 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service vpls string sap string static-host ipv4 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service vpls string sap string static-host ipv4 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service vpls string sap string static-host ipv4 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service vpls string sap string static-host ipv4 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service vpls string sap string static-host ipv4 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service vpls string sap string static-host ipv4 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vpls string sap string static-host ipv4 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service vpls string sap string static-host ipv4 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service vpls string sap string static-host ipv4 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
static-isid
| Synopsis | Enter the static-isid context | |
| Context | configure service vpls string sap string static-isid | |
| Tree | static-isid | |
| Introduced | 19.10.R1 | |
Platforms | All |
range [range-id] number
[range-id] number
end number
start number
stp
admin-state keyword
| Synopsis | Administrative state of STP | |
| Context | configure service vpls string sap string stp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms |
All |
auto-edge boolean
edge-port boolean
link-type keyword
mst-instance [mst-inst-number] number
| Synopsis | Enter the mst-instance list instance | |
| Context | configure service vpls string sap string stp mst-instance number | |
| Tree | mst-instance | |
| Introduced | 19.10.R1 | |
Platforms | All |
[mst-inst-number] number
| Synopsis | Multiple Spanning Tree Instance number | |
| Context | configure service vpls string sap string stp mst-instance number | |
| Tree | mst-instance | |
| Range | 1 to 4094 | |
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
mst-path-cost number
| Synopsis | MSTI path cost | |
| Context | configure service vpls string sap string stp mst-instance number mst-path-cost number | |
| Tree | mst-path-cost | |
| Range | 1 to 200000000 | |
| Default | 10 | |
| Introduced | 19.10.R1 | |
Platforms |
All |
mst-port-priority number
| Synopsis | MSTI port priority | |
| Context | configure service vpls string sap string stp mst-instance number mst-port-priority number | |
| Tree | mst-port-priority | |
| Range | 0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240 | |
| Default | 128 | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
path-cost number
port-num number
priority number
root-guard boolean
| Synopsis | Enable/disable STP root-guard | |
| Context | configure service vpls string sap string stp root-guard boolean | |
| Tree | root-guard | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
sub-sla-mgmt
| Synopsis | Enter the sub-sla-mgmt context | |
| Context | configure service vpls string sap string sub-sla-mgmt | |
| Tree | sub-sla-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of SAP subscriber management | |
| Context | configure service vpls string sap string sub-sla-mgmt admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
app-profile reference
| Synopsis | Default application profile name for this SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id
| Synopsis | Enter the int-dest-id context | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults int-dest-id | |
| Tree | int-dest-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Use the configured string | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults int-dest-id string string | |
| Tree | string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
top-q-tag
| Synopsis | Use the top Q-tag of this SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults int-dest-id top-q-tag | |
| Tree | top-q-tag | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Default SLA profile for hosts on this SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Default subscriber profile for the SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-id
| Synopsis | Use auto-generated subscriber identification string | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults subscriber-id auto-id | |
| Tree | auto-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use SAP ID as default subscriber identification string | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults subscriber-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Default subscriber identification string for the SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt defaults subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-da-hashing boolean
| Synopsis | Use destination MAC address instead of subscriber ID to select egress LAG link | |
| Context | configure service vpls string sap string sub-sla-mgmt mac-da-hashing boolean | |
| Tree | mac-da-hashing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
single-sub-parameters
| Synopsis | Enter the single-sub-parameters context | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters | |
| Tree | single-sub-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
non-sub-traffic
| Synopsis | Enable the non-sub-traffic context | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic | |
| Tree | non-sub-traffic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name for all non-subscriber traffic | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile applicable for all non-subscriber traffic | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Subscriber profile all non-subscriber traffic | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Subscriber ID applied for all non-subscriber traffic | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic subscriber-id string | |
| Tree | subscriber-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
profiled-traffic-only boolean
| Synopsis | Include all traffic in subscriber profile | |
| Context | configure service vpls string sap string sub-sla-mgmt single-sub-parameters profiled-traffic-only boolean | |
| Tree | profiled-traffic-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-ident-policy reference
| Synopsis | Subscriber identification policy used on this SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt sub-ident-policy reference | |
| Tree | sub-ident-policy | |
Reference | configure subscriber-mgmt sub-ident-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-limit (keyword | number)
| Synopsis | Maximum number of subscribers on this SAP | |
| Context | configure service vpls string sap string sub-sla-mgmt subscriber-limit (keyword | number) | |
| Tree | subscriber-limit | |
| Range | 1 to 131071 | |
| Options | ||
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service vpls string sap string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service vpls string sap string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service vpls string sap string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
segment-routing-v6 [instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service vpls string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Max. Instances | 1 | |
| Introduced | 22.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[instance] number
| Synopsis | Segment routing v6 instance | |
| Context | configure service vpls string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
locator [locator-name] reference
| Synopsis | Enter the locator list instance | |
| Context | configure service vpls string segment-routing-v6 number locator reference | |
| Tree | locator | |
| Max. Instances | 1 | |
| Introduced | 22.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | SRv6 locator name | |
| Context | configure service vpls string segment-routing-v6 number locator reference | |
| Tree | locator | |
Reference | configure router string segment-routing segment-routing-v6 locator string | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
end-dt2m
value number
| Synopsis | SRv6 function value | |
| Context | configure service vpls string segment-routing-v6 number locator reference function end-dt2m value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
end-dt2u
value number
| Synopsis | SRv6 function value | |
| Context | configure service vpls string segment-routing-v6 number locator reference function end-dt2u value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
micro-segment-locator [locator-name] reference
| Synopsis | Enter the micro-segment-locator list instance | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
| Max. Instances | 1 | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | Micro-segment SRv6 locator name | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
Description | This command associates a pre-defined micro-segment SRv6 locator (defined in the configure router segment-routing segment-routing-v6 context) with the SRv6 instance in the service. The same micro-segment locator can be referenced in multiple BGP instances used by IPVPN or EVPN. | |
Reference | configure router string segment-routing segment-routing-v6 micro-segment-locator string | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
| Synopsis | Enter the function context | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference function | |
| Tree | function | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udt2m
| Synopsis | Enable the udt2m context | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference function udt2m | |
| Tree | udt2m | |
Description | Commands in this context configure the SRv6 uDT2M behavior and the function value that is associated to the SRv6 instance in the service. When configured, decapsulation and table lookup for IPv6 prefixes occurs in the VPLS service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference function udt2m value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udt2u
| Synopsis | Enable the udt2u context | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference function udt2u | |
| Tree | udt2u | |
Description | Commands in this context configure the SRv6 uDT2U behavior and the function value that is associated to the SRv6 instance in the service. When configured, decapsulation and table lookup for IPv6 prefixes occurs in the VPLS service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service vpls string segment-routing-v6 number micro-segment-locator reference function udt2u value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service vpls string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-mtu number
| Synopsis | MTU size | |
| Context | configure service vpls string service-mtu number | |
| Tree | service-mtu | |
Description | This command configures the Maximum Transmission Unit (MTU) value (payload) for the service. The system uses the value to validate the operational state of the SAP and SDP binding within the service. The value overrides the default MTU for the service type. The service MTU and a SAP’s service delineation encapsulation overhead (4 bytes for a dot1q tag) are used to derive the required MTU of the physical port or channel on which the SAP was created. If the required payload is larger than the port or channel MTU, the SAP is placed in an inoperative state. If the required MTU is equal to or less than the port or channel MTU, the SAP transitions to the operative state. When binding an SDP to a service, the service MTU is compared to the path MTU associated with the SDP. The path MTU can be administratively defined in the context of the SDP. The default or administrative path MTU can be dynamically reduced due to the MTU capabilities discovered by the tunneling mechanism of the SDP or the egress interface MTU capabilities based on the next hop in the tunnel path. If the service MTU is larger than the path MTU, the SDP binding for the service is placed in an inoperative state. If the service MTU is equal to or less than the path MTU, the SDP binding is placed in an operational state. If a service MTU, port or channel MTU, or path MTU is dynamically or administratively modified, all associated SAP and SDP binding operational states are automatically reevaluated. Binding operational states are automatically reevaluated. For I-VPLS and Epipes bound to a B-VPLS, the service MTU must be at least 18 bytes smaller than the B-VPLS service MTU to accommodate the PBB header. Because this connects a Layer 2 to a Layer 3 service, adjust the service MTU under the Epipe service. The MTU that is advertised from the Epipe side is service MTU minus EtherHeaderSize. In the configure service epipe spoke-sdp context, the adv-service-mtu command can be used to override the configured MTU value used in T-LDP signaling to the far-end of an Epipe spoke-sdp. The adv-service-mtu command is also used to validate the value signaled by the far-end PE. | |
| Range | 1 to 9782 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
shcv-policy-ipv4 reference
| Synopsis | Subscriber host connectivity verification policy for IPv4 | |
| Context | configure service vpls string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
spb
admin-state keyword
| Synopsis | Administrative state of SPB | |
| Context | configure service vpls string spb admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | All |
fid number
isis-instance number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | ISIS instance | |
| Context | configure service vpls string spb isis-instance number | |
| Tree | isis-instance | |
| Range | 1024 to 2047 | |
| Default | 1024 | |
| Introduced | 21.10.R1 | |
Platforms |
All | |
level [id] number
[id] number
bridge-priority number
| Synopsis | SPB Bridge priority | |
| Context | configure service vpls string spb level number bridge-priority number | |
| Tree | bridge-priority | |
| Range | 0 to 15 | |
| Default | 8 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
ect-high-path-fid [fid] number
| Synopsis | Add a list entry for ect-high-path-fid | |
| Context | configure service vpls string spb level number ect-high-path-fid number | |
| Tree | ect-high-path-fid | |
| Introduced | 21.10.R1 | |
Platforms | All |
[fid] number
| Synopsis | SPB control vpls FID | |
| Context | configure service vpls string spb level number ect-high-path-fid number | |
| Tree | ect-high-path-fid | |
| Range | 1 to 4095 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | All |
forwarding-tree
| Synopsis | Enter the forwarding-tree context | |
| Context | configure service vpls string spb level number forwarding-tree | |
| Tree | forwarding-tree | |
| Introduced | 21.10.R1 | |
Platforms | All |
topology keyword
lsp-lifetime number
| Synopsis | Time LSP is considered valid by other routers | |
| Context | configure service vpls string spb lsp-lifetime number | |
| Tree | lsp-lifetime | |
| Range | 350 to 65535 | |
| Default | 1200 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
lsp-refresh-interval
| Synopsis | Enter the lsp-refresh-interval context | |
| Context | configure service vpls string spb lsp-refresh-interval | |
| Tree | lsp-refresh-interval | |
| Introduced | 21.10.R1 | |
Platforms | All |
half-lifetime boolean
| Synopsis | Refresh LSP interval at half the LSP lifetime | |
| Context | configure service vpls string spb lsp-refresh-interval half-lifetime boolean | |
| Tree | half-lifetime | |
| Default | true | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
interval number
overload
timeout number
overload-on-boot
| Synopsis | Enable the overload-on-boot context | |
| Context | configure service vpls string spb overload-on-boot | |
| Tree | overload-on-boot | |
| Introduced | 21.10.R1 | |
Platforms | All |
timeout number
timers
lsp-wait
initial-wait number
| Synopsis | Initial wait | |
| Context | configure service vpls string spb timers lsp-wait initial-wait number | |
| Tree | initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 10 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
max-wait number
second-wait number
| Synopsis | Second wait | |
| Context | configure service vpls string spb timers lsp-wait second-wait number | |
| Tree | second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
spf-wait
initial-wait number
| Synopsis | Initial wait | |
| Context | configure service vpls string spb timers spf-wait initial-wait number | |
| Tree | initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
max-wait number
second-wait number
| Synopsis | Second wait | |
| Context | configure service vpls string spb timers spf-wait second-wait number | |
| Tree | second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
spbm-control-vpls
| Synopsis | Enter the spbm-control-vpls context | |
| Context | configure service vpls string spbm-control-vpls | |
| Tree | spbm-control-vpls | |
| Introduced | 21.10.R1 | |
Platforms | All |
fid number
| Synopsis | SPB control vpls FID | |
| Context | configure service vpls string spbm-control-vpls fid number | |
| Tree | fid | |
| Range | 1 to 4095 | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
service-name string
| Synopsis | SPB control vpls service | |
| Context | configure service vpls string spbm-control-vpls service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 21.10.R1 | |
Platforms | All |
split-horizon-group [shg-name] string
| Synopsis | Enter the split-horizon-group list instance | |
| Context | configure service vpls string split-horizon-group string | |
| Tree | split-horizon-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[shg-name] string
| Synopsis | SHG name to which the SDP belongs | |
| Context | configure service vpls string split-horizon-group string | |
| Tree | split-horizon-group | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vpls string split-horizon-group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fdb
| Synopsis | Enter the fdb context | |
| Context | configure service vpls string split-horizon-group string fdb | |
| Tree | fdb | |
| Introduced | 16.0.R1 | |
Platforms | All |
saps
auto-learn-mac-protect boolean
| Synopsis | Populate automatically MAC protect list with MAC addresses learned on SDP with split horizon group | |
| Context | configure service vpls string split-horizon-group string fdb saps auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
auto-learn-mac-protect-exclude-list reference
| Synopsis | Referenced MAC protect exclusion list name | |
| Context | configure service vpls string split-horizon-group string fdb saps auto-learn-mac-protect-exclude-list reference | |
| Tree | auto-learn-mac-protect-exclude-list | |
Description | This command references the name of a MAC protect exclusion list. Dynamically-learned MAC Source Addresses (SA) are protected if they are learned on an object with ALMP configured and no exclusion list is associated with the object, or if the MAC SA does not match any entry in an associated exclusion list. An exclusion list can be used in multiple objects of a service. If a list is empty, ALMP does not exclude any learned MAC SAs from protection on the object. | |
Reference | ||
| Introduced | 20.5.R1 | |
Platforms | All |
discard-unprotected-dest-mac boolean
| Synopsis | Discard packet with unprotected destination MAC address | |
| Context | configure service vpls string split-horizon-group string fdb saps discard-unprotected-dest-mac boolean | |
| Tree | discard-unprotected-dest-mac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action to take whenever a relearn request for a protected MAC is received | |
| Context | configure service vpls string split-horizon-group string fdb saps protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
residential boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Define as a residential split horizon group | |
| Context | configure service vpls string split-horizon-group string residential boolean | |
| Tree | residential | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
accounting-policy reference
| Synopsis | Policy to collect accounting statistics | |
| Context | configure service vpls string spoke-sdp string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service vpls string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
app-profile reference
| Synopsis | ISA-AA application profile name for this SDP | |
| Context | configure service vpls string spoke-sdp string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vpls string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service vpls string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
failure-action keyword
| Synopsis | VCCV BFD action taken on the SDP binding | |
| Context | configure service vpls string spoke-sdp string bfd failure-action keyword | |
| Tree | failure-action | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
| Options | ||
| Default | none | |
| Introduced | 21.2.R1 | |
Platforms | All |
wait-for-up-timer number
| Synopsis | Time waited for BFD up status | |
| Context | configure service vpls string spoke-sdp string bfd wait-for-up-timer number | |
| Tree | wait-for-up-timer | |
Description | This command configures the time interval that is used to wait for a BFD session to come up. This command is triggered when a spoke-SDP is first administratively enabled and a VCCV BFD session transitions from up to down. The command is required to allow time for BFD sessions to come up, and for BFD to settle before selecting the active spoke-SDP for use in a redundant set. In the case where a VCCV BFD session is bouncing, the timer prevents excessive flapping of the operational state of a spoke-SDP. | |
| Range | 1 to 60 | |
| Units | seconds | |
| Introduced | 21.2.R1 | |
Platforms |
All |
block-on-mesh-failure boolean
| Synopsis | Enable blocking after all SDPs are operationally down | |
| Context | configure service vpls string spoke-sdp string block-on-mesh-failure boolean | |
| Tree | block-on-mesh-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bpdu-translation keyword
| Synopsis | BPDU format | |
| Context | configure service vpls string spoke-sdp string bpdu-translation keyword | |
| Tree | bpdu-translation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
collect-stats boolean
| Synopsis | Allow agent to collect accounting statistics | |
| Context | configure service vpls string spoke-sdp string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service vpls string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vpls string spoke-sdp string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vpls string spoke-sdp string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vpls string spoke-sdp string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vpls string spoke-sdp string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vpls string spoke-sdp string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vpls string spoke-sdp string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dhcp
description string
| Synopsis | Text description | |
| Context | configure service vpls string spoke-sdp string dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
snoop boolean
egress
filter
ip reference
ipv6 reference
mac reference
mfib-allowed-mda-destinations
| Synopsis | Enter the mfib-allowed-mda-destinations context | |
| Context | configure service vpls string spoke-sdp string egress mfib-allowed-mda-destinations | |
| Tree | mfib-allowed-mda-destinations | |
| Introduced | 16.0.R4 | |
Platforms | All |
mda [mda-id] string
[mda-id] string
qos
network
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service vpls string spoke-sdp string egress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service vpls string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service vpls string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service vpls string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
endpoint
name reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of service endpoint to which SDP bind is attached | |
| Context | configure service vpls string spoke-sdp string endpoint name reference | |
| Tree | name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All | |
precedence (number | keyword)
| Synopsis | Precedence of this SDP bind when there are multiple SDP binds attached to one service endpoint | |
| Context | configure service vpls string spoke-sdp string endpoint precedence (number | keyword) | |
| Tree | precedence | |
| Range | 1 to 4 | |
| Options | ||
| Default | 4 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service vpls string spoke-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vpls string spoke-sdp string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vpls string spoke-sdp string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vpls string spoke-sdp string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vpls string spoke-sdp string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais
| Synopsis | Enable the ais context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais | |
| Tree | ais | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
client-meg-level number
| Synopsis | Client MEG level for AIS message generation | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais client-meg-level number | |
| Tree | client-meg-level | |
| Range | 1 to 7 | |
| Max. Instances | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interface-support boolean
| Synopsis | Enable generation of AIS PDUs based on endpoint state | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interface-support boolean | |
| Tree | interface-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
| Synopsis | Transmission interval for AIS messages | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais interval number | |
| Tree | interval | |
| Range | 1 | 60 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | all-def | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Priority of the AIS messages generated by the node | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
| Synopsis | Enable the csf context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
direction keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Direction the MEP faces | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number direction keyword | |
| Tree | direction | |
| Options | ||
| Default | down | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
lbm-svc-act-responder boolean
| Synopsis | Process service activation streams in ETH-CFM LBM | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number lbm-svc-act-responder boolean | |
| Tree | lbm-svc-act-responder | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number mac-address string | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the MEP. When unconfigured, the MAC address of the port (if the MEP is on a SAP) or the MAC address of a bridge (if the MEP is on a spoke) is used. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
primary-vlan boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MEP provisioned using MA primary VLAN ID | |
| Context | configure service vpls string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number primary-vlan boolean | |
| Tree | primary-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
mip primary-vlan (number | keyword)
primary-vlan (number | keyword)
| Synopsis | VLAN ID to which the MIP is attached | |
| Context | configure service vpls string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) | |
| Tree | mip | |
Description | This command provides an option for linking a MIP with a Primary VLAN number or none. When the none option is provided, the MIP does not include the primary vlan. | |
| Range | 1 to 4094 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cfm-vlan-tag string
| Synopsis | VLAN tags to apply to CFM PDUs for egress processing | |
| Context | configure service vpls string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) cfm-vlan-tag string | |
| Tree | cfm-vlan-tag | |
Description | This command allows the CFM function to include additional VLAN tags to the CFM packet that are carried to the egress and treated as service delimited. Typically, this function is used to influence the VLAN carried over a binding that uses the vc-type vlan or the binding forces the use of one or more VLAN tag that results in a mismatch between the service data arriving at the binding and the locally generated ETH-CFM PDUs arriving at the same egress. When this command is included under the MEP or MIP configuration, the tags used as part of the configuration typically match the SAP service delimited configuration. | |
| String Length | 1 to 9 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-address string
| Synopsis | MAC address of the MIP | |
| Context | configure service vpls string spoke-sdp string eth-cfm mip primary-vlan (number | keyword) mac-address string | |
| Tree | mac-address | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-ctag-levels number
| Synopsis | Squelch levels using additional VLAN C-Tag space | |
| Context | configure service vpls string spoke-sdp string eth-cfm squelch-ingress-ctag-levels number | |
| Tree | squelch-ingress-ctag-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding plus an additional VLAN, up to a maximum tag length of two tags. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level to be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 21.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vpls string spoke-sdp string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vmep-filter boolean
| Synopsis | Suppress eth-cfm PDUs based on level lower than or equal to configured Virtual MEP | |
| Context | configure service vpls string spoke-sdp string eth-cfm vmep-filter boolean | |
| Tree | vmep-filter | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
etree-leaf boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable etree leaf access-circuit status | |
| Context | configure service vpls string spoke-sdp string etree-leaf boolean | |
| Tree | etree-leaf | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
etree-root-leaf-tag boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | E-tree root leaf tag status | |
| Context | configure service vpls string spoke-sdp string etree-root-leaf-tag boolean | |
| Tree | etree-root-leaf-tag | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
fdb
auto-learn-mac-protect boolean
| Synopsis | Populate automatically MAC protect list with source MAC addresses learned on SDP | |
| Context | configure service vpls string spoke-sdp string fdb auto-learn-mac-protect boolean | |
| Tree | auto-learn-mac-protect | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
auto-learn-mac-protect-exclude-list reference
| Synopsis | Referenced MAC protect exclusion list name | |
| Context | configure service vpls string spoke-sdp string fdb auto-learn-mac-protect-exclude-list reference | |
| Tree | auto-learn-mac-protect-exclude-list | |
Description | This command references the name of a MAC protect exclusion list. Dynamically-learned MAC Source Addresses (SA) are protected if they are learned on an object with ALMP configured and no exclusion list is associated with the object, or if the MAC SA does not match any entry in an associated exclusion list. An exclusion list can be used in multiple objects of a service. If a list is empty, ALMP does not exclude any learned MAC SAs from protection on the object. | |
Reference | ||
| Introduced | 20.5.R1 | |
Platforms | All |
discard-unknown-source boolean
| Synopsis | Discard packets with unknown destination MAC addresses | |
| Context | configure service vpls string spoke-sdp string fdb discard-unknown-source boolean | |
| Tree | discard-unknown-source | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit-mac-move keyword
| Synopsis | MAC move | |
| Context | configure service vpls string spoke-sdp string fdb limit-mac-move keyword | |
| Tree | limit-mac-move | |
| Options | ||
| Default | blockable | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service vpls string spoke-sdp string fdb mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R1 | |
Platforms | All |
aging boolean
learning boolean
mac-pinning boolean
| Synopsis | MAC address pinning in active status | |
| Context | configure service vpls string spoke-sdp string fdb mac-pinning boolean | |
| Tree | mac-pinning | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-mac-addresses number
| Synopsis | Maximum number of MAC address entries in the FDB | |
| Context | configure service vpls string spoke-sdp string fdb maximum-mac-addresses number | |
| Tree | maximum-mac-addresses | |
Description | This command specifies the maximum number of FDB entries for both learned and static MAC addresses for this spoke SDP. When the configured limit is reached, no new addresses are learned from the SAP or spoke SDP until at least one FDB entry is aged out or cleared. When the configured limit is reached and the configure service spoke-sdp fdb discard-unknown-source command is set to true for this spoke SDP, packets with unknown source MAC addresses are discarded. If discard-unknown-source is set to false, the packets are forwarded if their destination MAC addresses are known, or flooded if their destination MAC addresses are unknown. However, if the configure service vpls fdb discard-unknown command is set to true, packets with unknown destination MAC addresses are discarded, even if the limit of FDB entries on the specific VPLS instance is not reached. When unconfigured, the spoke SDP uses the global MAC learning limitations. | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protected-src-mac-violation-action keyword
| Synopsis | Action when a relearn request for a protected MAC is received on the SDP | |
| Context | configure service vpls string spoke-sdp string fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
force-vc-forwarding keyword
| Synopsis | VC forwarding action | |
| Context | configure service vpls string spoke-sdp string force-vc-forwarding keyword | |
| Tree | force-vc-forwarding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service vpls string spoke-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service vpls string spoke-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
i-vpls-mac-flush
| Synopsis | Enter the i-vpls-mac-flush context | |
| Context | configure service vpls string spoke-sdp string i-vpls-mac-flush | |
| Tree | i-vpls-mac-flush | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-evpn
send-to-bvpls boolean
| Synopsis | Send B-VPLS EVPN flush | |
| Context | configure service vpls string spoke-sdp string i-vpls-mac-flush bgp-evpn send-to-bvpls boolean | |
| Tree | send-to-bvpls | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string spoke-sdp string igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string spoke-sdp string igmp-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string spoke-sdp string igmp-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-group-sources number
| Synopsis | Maximum group source combinations | |
| Context | configure service vpls string spoke-sdp string igmp-snooping maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string spoke-sdp string igmp-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-sources number
| Synopsis | Maximum sources that are allowed per group | |
| Context | configure service vpls string spoke-sdp string igmp-snooping maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vpls string spoke-sdp string igmp-snooping mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vpls string spoke-sdp string igmp-snooping mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string spoke-sdp string igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string spoke-sdp string igmp-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string spoke-sdp string igmp-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string spoke-sdp string igmp-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string spoke-sdp string igmp-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string spoke-sdp string igmp-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string spoke-sdp string igmp-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
| Synopsis | Group address of static IGMP multicast channel | |
| Context | configure service vpls string spoke-sdp string igmp-snooping static group string | |
| Tree | group | |
Description | This command configures an address that receives data on an interface. The IP address must be unique for each static group. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
version keyword
ignore-standby-signaling boolean
| Synopsis | Ignore standby-bit received from TLDP peers when performing internal tasks | |
| Context | configure service vpls string spoke-sdp string ignore-standby-signaling boolean | |
| Tree | ignore-standby-signaling | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ingress
filter
ip reference
ipv6 reference
mac reference
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vpls string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service vpls string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
| Synopsis | Network policy ID | |
| Context | configure service vpls string spoke-sdp string ingress qos network policy-name reference | |
| Tree | policy-name | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service vpls string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
l2pt
termination
| Synopsis | Enable the termination context | |
| Context | configure service vpls string spoke-sdp string l2pt termination | |
| Tree | termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
protocols
cdp boolean
dtp boolean
pagp boolean
stp boolean
udld boolean
vtp boolean
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string spoke-sdp string mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
fast-leave boolean
| Synopsis | Allow IGMP fast leave processing | |
| Context | configure service vpls string spoke-sdp string mld-snooping fast-leave boolean | |
| Tree | fast-leave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vpls string spoke-sdp string mld-snooping import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups allowed | |
| Context | configure service vpls string spoke-sdp string mld-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mrouter-port boolean
| Synopsis | Operate port as a multicast router port | |
| Context | configure service vpls string spoke-sdp string mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vpls string spoke-sdp string mld-snooping query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vpls string spoke-sdp string mld-snooping query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vpls string spoke-sdp string mld-snooping query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vpls string spoke-sdp string mld-snooping robust-count number | |
| Tree | robust-count | |
| Range | 2 to 7 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-alert-check boolean
| Synopsis | Enable IP router alert check option | |
| Context | configure service vpls string spoke-sdp string mld-snooping router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-queries boolean
| Synopsis | Generate IGMP general queries | |
| Context | configure service vpls string spoke-sdp string mld-snooping send-queries boolean | |
| Tree | send-queries | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static
group [group-address] string
[group-address] string
source [source-address] string
[source-address] string
starg
version keyword
monitor-oper-group reference
| Synopsis | Operational group that affects state of the SDP bind | |
| Context | configure service vpls string spoke-sdp string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mrp
join-time number
leave-all-time number
| Synopsis | Frequency of LeaveAll PDUs by LeaveAll state machine | |
| Context | configure service vpls string spoke-sdp string mrp leave-all-time number | |
| Tree | leave-all-time | |
| Range | 60 to 300 | |
| Units | deciseconds | |
| Default | 100 | |
| Introduced | 20.10.R1 | |
Platforms | All |
leave-time number
| Synopsis | Time in LV state before transition to MT state | |
| Context | configure service vpls string spoke-sdp string mrp leave-time number | |
| Tree | leave-time | |
| Range | 30 to 60 | |
| Units | deciseconds | |
| Default | 30 | |
| Introduced | 20.10.R1 | |
Platforms | All |
periodic-time number
| Synopsis | Frequency of periodic events generated by state machine | |
| Context | configure service vpls string spoke-sdp string mrp periodic-time number | |
| Tree | periodic-time | |
| Range | 10 to 100 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 20.10.R1 | |
Platforms | All |
periodic-timer boolean
| Synopsis | Enable the Periodic Transmission Timer | |
| Context | configure service vpls string spoke-sdp string mrp periodic-timer boolean | |
| Tree | periodic-timer | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
policy reference
oper-group reference
| Synopsis | Operational group identifier | |
| Context | configure service vpls string spoke-sdp string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
pbb
fault-propagation
| Synopsis | Enter the fault-propagation context | |
| Context | configure service vpls string spoke-sdp string pbb fault-propagation | |
| Tree | fault-propagation | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-address [address] string
| Synopsis | Add a list entry for backbone-mac-address | |
| Context | configure service vpls string spoke-sdp string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
| Introduced | 20.10.R1 | |
Platforms | All |
[address] string
| Synopsis | Backbone MAC address | |
| Context | configure service vpls string spoke-sdp string pbb fault-propagation backbone-mac-address string | |
| Tree | backbone-mac-address | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
backbone-mac-name [name] reference
| Synopsis | Add a list entry for backbone-mac-name | |
| Context | configure service vpls string spoke-sdp string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
| Introduced | 20.10.R1 | |
Platforms | All |
[name] reference
| Synopsis | Backbone MAC address name | |
| Context | configure service vpls string spoke-sdp string pbb fault-propagation backbone-mac-name reference | |
| Tree | backbone-mac-name | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | All |
pim-snooping
| Synopsis | Enter the pim-snooping context | |
| Context | configure service vpls string spoke-sdp string pim-snooping | |
| Tree | pim-snooping | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum groups for this interface | |
| Context | configure service vpls string spoke-sdp string pim-snooping maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pw-status
signaling boolean
spb
admin-state keyword
| Synopsis | Admin state | |
| Context | configure service vpls string spoke-sdp string spb admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | All |
level [id] number
[id] number
hello-interval number
| Synopsis | Hello interval | |
| Context | configure service vpls string spoke-sdp string spb level number hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 20000 | |
| Units | seconds | |
| Default | 9 | |
| Introduced | 21.10.R1 | |
Platforms | All |
hello-multiplier number
| Synopsis | Hello multiplier | |
| Context | configure service vpls string spoke-sdp string spb level number hello-multiplier number | |
| Tree | hello-multiplier | |
| Range | 2 to 100 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
metric number
lsp-pacing-interval number
| Synopsis | Lsp pacing interval | |
| Context | configure service vpls string spoke-sdp string spb lsp-pacing-interval number | |
| Tree | lsp-pacing-interval | |
| Range | 0 to 65535 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms | All |
retransmit-interval number
| Synopsis | Retransmit interval | |
| Context | configure service vpls string spoke-sdp string spb retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 21.10.R1 | |
Platforms | All |
split-horizon-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the split horizon group where the spoke SDP bind belongs to | |
| Context | configure service vpls string spoke-sdp string split-horizon-group reference | |
| Tree | split-horizon-group | |
Reference | configure service vpls string split-horizon-group string | |
| Introduced | 16.0.R1 | |
Platforms | All | |
static-isid
| Synopsis | Enter the static-isid context | |
| Context | configure service vpls string spoke-sdp string static-isid | |
| Tree | static-isid | |
| Introduced | 19.10.R1 | |
Platforms | All |
range [range-id] number
[range-id] number
end number
start number
stp
admin-state keyword
| Synopsis | Administrative state of STP | |
| Context | configure service vpls string spoke-sdp string stp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms |
All |
auto-edge boolean
edge-port boolean
link-type keyword
path-cost number
port-num number
priority number
root-guard boolean
| Synopsis | Enable/disable STP root-guard | |
| Context | configure service vpls string spoke-sdp string stp root-guard boolean | |
| Tree | root-guard | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service vpls string spoke-sdp string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service vpls string spoke-sdp string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vc-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Type of virtual circuit (VC) associated with the SDP binding; VPLS not supported | |
| Context | configure service vpls string spoke-sdp string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All | |
vlan-vc-tag number
| Synopsis | SDP bind VC tag | |
| Context | configure service vpls string spoke-sdp string vlan-vc-tag number | |
| Tree | vlan-vc-tag | |
| Range | 0 to 4094 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
stp
admin-state keyword
| Synopsis | Administrative state of STP | |
| Context | configure service vpls string stp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | All |
forward-delay number
| Synopsis | Configure forward-delay | |
| Context | configure service vpls string stp forward-delay number | |
| Tree | forward-delay | |
| Range | 4 to 30 | |
| Default | 15 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
hello-time number
| Synopsis | Configure hello-time | |
| Context | configure service vpls string stp hello-time number | |
| Tree | hello-time | |
| Range | 1 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
hold-count number
| Synopsis | Configure BPDU transmit hold count | |
| Context | configure service vpls string stp hold-count number | |
| Tree | hold-count | |
| Range | 1 to 20 | |
| Default | 6 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
maximum-age number
| Synopsis | Configure maximum STP information age | |
| Context | configure service vpls string stp maximum-age number | |
| Tree | maximum-age | |
| Range | 6 to 40 | |
| Default | 20 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
mode keyword
mst-instance [mst-inst-number] number
| Synopsis | Enter the mst-instance list instance | |
| Context | configure service vpls string stp mst-instance number | |
| Tree | mst-instance | |
| Introduced | 19.10.R1 | |
Platforms | All |
[mst-inst-number] number
| Synopsis | Multiple Spanning Tree Instance number | |
| Context | configure service vpls string stp mst-instance number | |
| Tree | mst-instance | |
| Range | 1 to 4094 | |
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
mst-priority number
| Synopsis | Priority of multiple spanning tree instance | |
| Context | configure service vpls string stp mst-instance number mst-priority number | |
| Tree | mst-priority | |
| Range | 0 | 4096 | 8192 | 12288 | 16384 | 20480 | 24576 | 28672 | 32768 | 36864 | 40960 | 45056 | 49152 | 53248 | 57344 | 61440 | |
| Default | 32768 | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
vlan-range [range] string
| Synopsis | Add a list entry for vlan-range | |
| Context | configure service vpls string stp mst-instance number vlan-range string | |
| Tree | vlan-range | |
| Introduced | 19.10.R1 | |
Platforms | All |
[range] string
| Synopsis | Range of VLANs associated with the M-VPLS SAP | |
| Context | configure service vpls string stp mst-instance number vlan-range string | |
| Tree | vlan-range | |
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
mst-maximum-hops number
| Synopsis | Maximum number of hops in an MSTP region | |
| Context | configure service vpls string stp mst-maximum-hops number | |
| Tree | mst-maximum-hops | |
| Range | 1 to 40 | |
| Default | 20 | |
| Introduced | 19.10.R1 | |
Platforms |
All |
mst-name string
mst-revision number
| Synopsis | MST configuration revision | |
| Context | configure service vpls string stp mst-revision number | |
| Tree | mst-revision | |
| Range | 0 to 65535 | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
priority number
temp-flooding number
| Synopsis | Temporary flooding | |
| Context | configure service vpls string temp-flooding number | |
| Tree | temp-flooding | |
| Range | 3 to 600 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
tunnel-elmi boolean
| Synopsis | Allow E-LMI tunneling | |
| Context | configure service vpls string tunnel-elmi boolean | |
| Tree | tunnel-elmi | |
Description | When configured to true, the router allows E-LMI packets in a VPLS service to be tunneled. The following must also be the case for this command to function:
When configured to false, tunneling of the E-LMI packets for a VPLS service is disabled. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vpn-id number
vxlan
instance [vxlan-instance] number
[vxlan-instance] number
assisted-replication
| Synopsis | Enter the assisted-replication context | |
| Context | configure service vpls string vxlan instance number assisted-replication | |
| Tree | assisted-replication | |
| Introduced | 16.0.R1 | |
Platforms | All |
leaf
acttime number
replicator
| Synopsis | AR role as replicator | |
| Context | configure service vpls string vxlan instance number assisted-replication replicator | |
| Tree | replicator | |
Notes | The following elements are part of a choice: leaf or replicator. | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress-vtep [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Add a list entry for egress-vtep | |
| Context | configure service vpls string vxlan instance number egress-vtep (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | egress-vtep | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | VTEP IP address used when originating VXLAN packets | |
| Context | configure service vpls string vxlan instance number egress-vtep (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | egress-vtep | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fdb
discard-unknown-source boolean
| Synopsis | Discard frames with unknown source | |
| Context | configure service vpls string vxlan instance number fdb discard-unknown-source boolean | |
| Tree | discard-unknown-source | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service vpls string vxlan instance number fdb mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
aging boolean
learning boolean
maximum-mac-addresses number
| Synopsis | Maximum number of MAC entries in the FDB from this vxlan instance | |
| Context | configure service vpls string vxlan instance number fdb maximum-mac-addresses number | |
| Tree | maximum-mac-addresses | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
protected-src-mac-violation-action keyword
| Synopsis | Action for a relearn request for a protected MAC | |
| Context | configure service vpls string vxlan instance number fdb protected-src-mac-violation-action keyword | |
| Tree | protected-src-mac-violation-action | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
igmp-snooping
| Synopsis | Enter the igmp-snooping context | |
| Context | configure service vpls string vxlan instance number igmp-snooping | |
| Tree | igmp-snooping | |
| Introduced | 16.0.R5 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Enable VXLAN binds as multicast router ports | |
| Context | configure service vpls string vxlan instance number igmp-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R5 | |
|
Platforms | All |
mld-snooping
| Synopsis | Enter the mld-snooping context | |
| Context | configure service vpls string vxlan instance number mld-snooping | |
| Tree | mld-snooping | |
| Introduced | 16.0.R5 | |
Platforms | All |
mrouter-port boolean
| Synopsis | Enable VXLAN binds as multicast router ports | |
| Context | configure service vpls string vxlan instance number mld-snooping mrouter-port boolean | |
| Tree | mrouter-port | |
| Default | false | |
| Introduced | 16.0.R5 | |
|
Platforms | All |
network
ingress
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vpls string vxlan instance number network ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service vpls string vxlan instance number network ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
rx-discard-on-ndf keyword
| Synopsis | Received multicast traffic type discarded on NDF | |
| Context | configure service vpls string vxlan instance number rx-discard-on-ndf keyword | |
| Tree | rx-discard-on-ndf | |
| Options | ||
| Default | bm | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
source-vtep-security boolean
| Synopsis | Enable/disable source vtep security | |
| Context | configure service vpls string vxlan instance number source-vtep-security boolean | |
| Tree | source-vtep-security | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
vni number
source-vtep (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Vxlan source virtual tunnel endpoint information | |
| Context | configure service vpls string vxlan source-vtep (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-vtep | |
| Introduced | 16.0.R1 | |
Platforms | All |
wlan-gw
admin-state keyword
| Synopsis | Administrative state of WLAN-GW | |
| Context | configure service vpls string wlan-gw admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vpls string wlan-gw description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | WLAN-GW endpoint within the VPLS service | |
| Context | configure service vpls string wlan-gw wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Description | This command specifies a WLAN-GW group to be used as an endpoint within the VPLS. This feature is used in conjunction with the configure service vprn subscriber-interface group-interface wlan-gw vlan-range dynamic-service command for a VPRN service and the configure service ies subscriber-interface group-interface wlan-gw vlan-range dynamic-service command for an IES service. See "Dynamic VPLS service" in the 7450 ESS, 7750 SR, and VSR Triple Play Service Delivery Architecture Guide for more information about the dynamic VPLS service feature. | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 23.3.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vprn [service-name] string
[service-name] string
aa-interface [interface-name] string
| Synopsis | Enter the aa-interface list instance | |
| Context | configure service vprn string aa-interface string | |
| Tree | aa-interface | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service vprn string aa-interface string | |
| Tree | aa-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string aa-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string aa-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service vprn string aa-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string aa-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
primary
address string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string aa-interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
| Synopsis | Enter the sap list instance | |
| Context | configure service vprn string aa-interface string sap string | |
| Tree | sap | |
| Max. Instances | 1 | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID | |
| Context | configure service vprn string aa-interface string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service vprn string aa-interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string aa-interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
qos
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service vprn string aa-interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service vprn string aa-interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service vprn string aa-interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service vprn string aa-interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ingress
qos
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service vprn string aa-interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure service vprn string aa-interface string sap string ingress qos sap-ingress overrides | |
| Tree | overrides | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service vprn string aa-interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lag
aaa
remote-servers
| Synopsis | Enter the remote-servers context | |
| Context | configure service vprn string aaa remote-servers | |
| Tree | remote-servers | |
| Introduced | 16.0.R4 | |
Platforms | All |
radius
access-algorithm keyword
| Synopsis | Algorithm used to access the set of RADIUS servers | |
| Context | configure service vprn string aaa remote-servers radius access-algorithm keyword | |
| Tree | access-algorithm | |
| Options | ||
| Default | direct | |
| Introduced | 16.0.R4 | |
Platforms | All |
accounting boolean
| Synopsis | Enable RADIUS command accounting | |
| Context | configure service vprn string aaa remote-servers radius accounting boolean | |
| Tree | accounting | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
accounting-port number
| Synopsis | Port number on RADIUS server for accounting requests | |
| Context | configure service vprn string aaa remote-servers radius accounting-port number | |
| Tree | accounting-port | |
| Range | 1 to 65535 | |
| Default | 1813 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
admin-state keyword
| Synopsis | Administrative state of the authentication server | |
| Context | configure service vprn string aaa remote-servers radius admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
authorization boolean
| Synopsis | Enable RADIUS authorization | |
| Context | configure service vprn string aaa remote-servers radius authorization boolean | |
| Tree | authorization | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
interactive-authentication boolean
| Synopsis | Enable RADIUS interactive authentication | |
| Context | configure service vprn string aaa remote-servers radius interactive-authentication boolean | |
| Tree | interactive-authentication | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
port number
server [index] number
[index] number
address (ipv4-address-no-zone | ipv6-address-no-zone)
authenticator keyword
| Synopsis | Authenticator hash algorithm for the RADIUS server | |
| Context | configure service vprn string aaa remote-servers radius server number authenticator keyword | |
| Tree | authenticator | |
Description | This command specifies the hash algorithm used to authenticate RADIUS Access-Request, Access-Accept, Access-Reject, Access-Challenge, Accounting-Request, and Accounting-Response packets. | |
| Options | ||
| Default | md5 | |
| Introduced | 22.10.R1 | |
Platforms | All |
secret string
tls-client-profile reference
| Synopsis | TLS client profile for the RADIUS server | |
| Context | configure service vprn string aaa remote-servers radius server number tls-client-profile reference | |
| Tree | tls-client-profile | |
Description | This command specifies the TLS client profile used to encrypt RADIUS communication. When configured, RADIUS messages are sent using TLS. | |
Reference | configure system security tls client-tls-profile string | |
| Introduced | 21.10.R1 | |
Platforms | All |
server-retry number
| Synopsis | Number of attempts to retry contacting RADIUS server | |
| Context | configure service vprn string aaa remote-servers radius server-retry number | |
| Tree | server-retry | |
| Range | 1 to 10 | |
| Default | 3 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
server-timeout number
| Synopsis | Time to wait for a response from the RADIUS server | |
| Context | configure service vprn string aaa remote-servers radius server-timeout number | |
| Tree | server-timeout | |
| Range | 1 to 90 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R4 | |
Platforms | All |
use-default-template boolean
| Synopsis | Apply the RADIUS default user template to RADIUS user | |
| Context | configure service vprn string aaa remote-servers radius use-default-template boolean | |
| Tree | use-default-template | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
tacplus
accounting
| Synopsis | Enable the accounting context | |
| Context | configure service vprn string aaa remote-servers tacplus accounting | |
| Tree | accounting | |
| Introduced | 16.0.R4 | |
Platforms | All |
record-type keyword
| Synopsis | Type of accounting record packet sent to TACACS+ server | |
| Context | configure service vprn string aaa remote-servers tacplus accounting record-type keyword | |
| Tree | record-type | |
| Options | ||
| Default | stop-only | |
| Introduced | 16.0.R4 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the TACACS+ protocol | |
| Context | configure service vprn string aaa remote-servers tacplus admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
authorization
| Synopsis | Enable the authorization context | |
| Context | configure service vprn string aaa remote-servers tacplus authorization | |
| Tree | authorization | |
| Introduced | 16.0.R4 | |
Platforms | All |
request-format
| Synopsis | Enter the request-format context | |
| Context | configure service vprn string aaa remote-servers tacplus authorization request-format | |
| Tree | request-format | |
Description | Commands in this context configure access operations that are sent to the TACACS+ server during authorization. | |
| Introduced | 21.10.R3 | |
Platforms | All |
access-operation-cmd keyword
| Synopsis | Access operations sent in authorization requests | |
| Context | configure service vprn string aaa remote-servers tacplus authorization request-format access-operation-cmd keyword | |
| Tree | access-operation-cmd | |
Description | This command sends an operation argument in authorization requests. In model-driven interfaces, this command configures the system to send the operation in the cmd argument, and the path in the cmd-args argument, in TACACS+ authorization requests. This command does not apply to authorization requests in classic interfaces. | |
| Options | ||
| Max. Instances | 1 | |
| Introduced | 21.10.R3 | |
|
Platforms | All |
use-priv-lvl boolean
| Synopsis | Allow privilege level mapping | |
| Context | configure service vprn string aaa remote-servers tacplus authorization use-priv-lvl boolean | |
| Tree | use-priv-lvl | |
Description | When configured to true, this command automatically performs a single authorization request to the TACACS+ server for cmd* (all commands) immediately after login, and then uses the local profile associated (via the priv-lvl-map) with the priv-lvl returned by the TACACS+ server for all subsequent authorization (except enable-admin). After the initial authorization for cmd*, no further authorization requests are sent to the TACACS+ server (except enable-admin). When configured to false, each command is sent to the TACACS+ server for authorization (this is true regardless of whether the tacplus use-default-template setting is enabled). | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
interactive-authentication boolean
| Synopsis | Allows TACACS+ interactive authentication | |
| Context | configure service vprn string aaa remote-servers tacplus interactive-authentication boolean | |
| Tree | interactive-authentication | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
priv-lvl-map
| Synopsis | Enter the priv-lvl-map context | |
| Context | configure service vprn string aaa remote-servers tacplus priv-lvl-map | |
| Tree | priv-lvl-map | |
| Introduced | 16.0.R4 | |
Platforms | All |
priv-lvl [level] number
| Synopsis | Enter the priv-lvl list instance | |
| Context | configure service vprn string aaa remote-servers tacplus priv-lvl-map priv-lvl number | |
| Tree | priv-lvl | |
| Introduced | 16.0.R4 | |
Platforms | All |
[level] number
| Synopsis | Privilege level for the mapping | |
| Context | configure service vprn string aaa remote-servers tacplus priv-lvl-map priv-lvl number | |
| Tree | priv-lvl | |
| Range | 0 to 15 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
user-profile-name reference
| Synopsis | User profile for the mapping | |
| Context | configure service vprn string aaa remote-servers tacplus priv-lvl-map priv-lvl number user-profile-name reference | |
| Tree | user-profile-name | |
Reference | configure system security aaa local-profiles profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | All |
server [index] number
[index] number
address (ipv4-address-no-zone | ipv6-address-no-zone)
port number
secret string
server-timeout number
| Synopsis | Time to wait for a response from the TACACS+ server | |
| Context | configure service vprn string aaa remote-servers tacplus server-timeout number | |
| Tree | server-timeout | |
| Range | 1 to 90 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R4 | |
Platforms | All |
use-default-template boolean
| Synopsis | Apply TACACS+ default user-template to TACACS+ user | |
| Context | configure service vprn string aaa remote-servers tacplus use-default-template boolean | |
| Tree | use-default-template | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
aarp-interface [interface-name] string
| Synopsis | Enter the aarp-interface list instance | |
| Context | configure service vprn string aarp-interface string | |
| Tree | aarp-interface | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service vprn string aarp-interface string | |
| Tree | aarp-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string aarp-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string aarp-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service vprn string aarp-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
spoke-sdp [sdp-bind-id] string
| Synopsis | Enter the spoke-sdp list instance | |
| Context | configure service vprn string aarp-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| Max. Instances | 1 | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sdp-bind-id] string
| Synopsis | SDP binding ID | |
| Context | configure service vprn string aarp-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
aarp
id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | AARP instance ID | |
| Context | configure service vprn string aarp-interface string spoke-sdp string aarp id reference | |
| Tree | id | |
Reference | configure application-assurance aarp number | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Role of the spoke SDP referenced by the AARP | |
| Context | configure service vprn string aarp-interface string spoke-sdp string aarp type keyword | |
| Tree | type | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of this service SDP binding | |
| Context | configure service vprn string aarp-interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string aarp-interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Static MPLS VC label to send packets to far-end device | |
| Context | configure service vprn string aarp-interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ingress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | VC ingress value that indicates a specific connection | |
| Context | configure service vprn string aarp-interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of the service | |
| Context | configure service vprn string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
aggregates
| Synopsis | Enter the aggregates context | |
| Context | configure service vprn string aggregates | |
| Tree | aggregates | |
| Introduced | 16.0.R1 | |
Platforms | All |
aggregate [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the aggregate list instance | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Destination IP address prefix of the aggregate route | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) | |
| Tree | aggregate | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
aggregator
| Synopsis | Enter the aggregator context | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) aggregator | |
| Tree | aggregator | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
| Synopsis | Aggregator IP address | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) aggregator address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | All |
as-number number
| Synopsis | Aggregator AS number | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) aggregator as-number number | |
| Tree | as-number | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
as-set boolean
| Synopsis | Use AS_SET path segment type for the aggregate route | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) as-set boolean | |
| Tree | as-set | |
Description | When configured to true, the AS_PATH attribute of the aggregate contains an AS_SET containing all AS numbers from the contributing routes. This can increase the amount of churn due to best-path changes. When configured to false, the AS_PATH attribute contains no AS_SET and will be originated by the ESR. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
blackhole
generate-icmp boolean
| Synopsis | Send ICMP unreachable messages for aggregate routes | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) blackhole generate-icmp boolean | |
| Tree | generate-icmp | |
Description | When configured to true, ICMP unreachable messages are sent when packets match an aggregate route in the FIB with a black-hole next-hop. When configured to false, ICMP unreachable messages are not generated. | |
| Default | false | |
| Introduced | 16.0.R2 | |
|
Platforms | All |
community string
| Synopsis | Community name that is added to the aggregate route | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) community string | |
| Tree | community | |
Description | This command associates a BGP community with the aggregate route. The community name can be matched in route policies and is automatically added to BGP routes exported from the aggregate route. | |
| String Length | 1 to 72 | |
| Max. Instances | 12 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
discard-component-communities boolean
| Synopsis | Advertise aggregate with aggregate route community set | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) discard-component-communities boolean | |
| Tree | discard-component-communities | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
indirect (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Address of the indirect next hop | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) indirect (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | indirect | |
Description | This command programs aggregate routes into the forwarding table with an indirect next hop. If a packet matches the aggregate route but not a contributing route, it is forwarded toward the indirect next hop rather than being discarded. | |
Notes | The following elements are part of a choice: blackhole or indirect. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
local-preference number
| Synopsis | Local preference used when aggregate route is exported | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) local-preference number | |
| Tree | local-preference | |
Description | This command configures the local preference value to use when the aggregate route is exported rather than using any of the local preference values assigned for any of the contributing routes. | |
| Range | 0 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy reference
| Synopsis | Policy name for the aggregated route | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) policy reference | |
| Tree | policy | |
Description | This command associates an aggregate route with a policy reference. The aggregated route is activated only when there is at least one eligible active route in the sub-trees below it that is accepted by the policy evaluation. There is no evaluation into any sub-tree that starts with another active aggregate route. Eligible routes exclude host routes and LDP shortcut routes. If an aggregate route has no policy, or the reference is to an empty policy, this configuration is treated as equivalent to a policy with one rule that accepts all routes. | |
Reference | configure policy-options policy-statement string | |
| Introduced | 20.10.R1 | |
Platforms | All |
summary-only boolean
| Synopsis | Advertise the aggregate route only | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) summary-only boolean | |
| Tree | summary-only | |
Description | When configured to true, the router suppresses the advertisement of more specific component routes for the aggregate. When configured to false, the router advertises both the aggregate route and its contributing routes. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tunnel-group number
| Synopsis | Tunnel group from which to associate the MC IPSec state | |
| Context | configure service vprn string aggregates aggregate (ipv4-prefix | ipv6-prefix) tunnel-group number | |
| Tree | tunnel-group | |
Description | This command adds the MC-IPsec state of the specific tunnel-group to the aggregate route. | |
| Range | 1 to 64 | |
| Introduced | 20.7.R1 | |
|
Platforms | All |
allow-export-bgp-vpn boolean
| Synopsis | Include BGP-VPN routes for export | |
| Context | configure service vprn string allow-export-bgp-vpn boolean | |
| Tree | allow-export-bgp-vpn | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
autonomous-system number
| Synopsis | AS number advertised to peers for this router | |
| Context | configure service vprn string autonomous-system number | |
| Tree | autonomous-system | |
Description | This command configures the autonomous system (AS) number for the router. This value must be set before BGP can be activated. If the AS number is changed on a router with an active BGP instance, the new AS number is not used until the BGP instance is restarted. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp
admin-state keyword
| Synopsis | Administrative state of the BGP instance | |
| Context | configure service vprn string bgp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-inactive boolean
| Synopsis | Advertise inactive BGP routes to peers | |
| Context | configure service vprn string bgp advertise-inactive boolean | |
| Tree | advertise-inactive | |
Description | When configured to true, this command allows any inactive BGP route to be advertised, even though it is not the used route. When configured to false, the advertisement of inactive BGP routes to other BGP peers is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertise-ipv6-next-hops
| Synopsis | Enter the advertise-ipv6-next-hops context | |
| Context | configure service vprn string bgp advertise-ipv6-next-hops | |
| Tree | advertise-ipv6-next-hops | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
aggregator-id-zero boolean
| Synopsis | Set router ID in the BGP AGGREGATOR attribute to 0 | |
| Context | configure service vprn string bgp aggregator-id-zero boolean | |
| Tree | aggregator-id-zero | |
Description | When configured to true, the router ID in the BGP AGGREGATOR path attribute is set to 0 when BGP aggregates routes. This prevents different routers within an AS from creating aggregate routes for the same prefix with different path attributes. When configured to false, the AS number and router ID are added to the AGGREGATOR path attribute. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
asn-4-byte boolean
| Synopsis | Advertise support for 4-byte ASNs | |
| Context | configure service vprn string bgp asn-4-byte boolean | |
| Tree | asn-4-byte | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-key string
| Synopsis | BGP authentication key for all peers | |
| Context | configure service vprn string bgp authentication-key string | |
| Tree | authentication-key | |
Description | This command configures the authentication key used to protect all sessions. The stored format of the authentication key is based on the configure system security hash-control management-interface md-cli hash-algorithm setting. | |
| String Length | 1 to 370 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | TCP authentication keychain for the session | |
| Context | configure service vprn string bgp authentication-keychain reference | |
| Tree | authentication-keychain | |
Description | This command associates the keychain to be used to authenticate the BGP session. The keychain allows the rollover of authentication keys during the lifetime of a session. | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
backup-path
| Synopsis | Enter the backup-path context | |
| Context | configure service vprn string bgp backup-path | |
| Tree | backup-path | |
Description | Commands in this context enable the use of a backup path for specified BGP-learned prefixes belonging to the base router. Multiple paths must be received for a prefix in order to take advantage of this feature. When a prefix has a backup path and its primary paths fail, the affected traffic is rapidly diverted to the backup path without waiting for control plane re-convergence to occur. When many prefixes share the same primary paths and in some cases, the same backup path, the time to divert failover traffic to the backup path is independent of the number of prefixes. By default, IPv4 and IPv6 prefixes do not have a backup path installed in the IOM. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Enable support for labeled-unicast IPv4 routes | |
| Context | configure service vprn string bgp backup-path label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-ipv6 boolean
| Synopsis | Enable support for labeled unicast IPv6 routes | |
| Context | configure service vprn string bgp backup-path label-ipv6 boolean | |
| Tree | label-ipv6 | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
best-path-selection
| Synopsis | Enter the best-path-selection context | |
| Context | configure service vprn string bgp best-path-selection | |
| Tree | best-path-selection | |
| Introduced | 16.0.R1 | |
Platforms | All |
always-compare-med
| Synopsis | Enter the always-compare-med context | |
| Context | configure service vprn string bgp best-path-selection always-compare-med | |
| Tree | always-compare-med | |
Description | Commands in this context determine how the BGP decision process is affected by the MED path attribute. | |
| Introduced | 16.0.R1 | |
Platforms | All |
med-value keyword
| Synopsis | Action for a missing MED attribute | |
| Context | configure service vprn string bgp best-path-selection always-compare-med med-value keyword | |
| Tree | med-value | |
| Options | ||
| Default | off | |
| Introduced | 16.0.R1 | |
Platforms | All |
strict-as boolean
| Synopsis | Compare MED only for routes from same neighbor AS | |
| Context | configure service vprn string bgp best-path-selection always-compare-med strict-as boolean | |
| Tree | strict-as | |
Description | When configured to true, the route selection process can compare the MED path attribute between routes only if they come from the same neighbor AS. When configured to false, the route selection process can compare the MED path attribute between routes even if they come from different neighbor ASs. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
as-path-ignore
| Synopsis | Enter the as-path-ignore context | |
| Context | configure service vprn string bgp best-path-selection as-path-ignore | |
| Tree | as-path-ignore | |
Description | Commands in this context determine whether the AS path length is considered in the selection process for routes of the specified address families. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
| Synopsis | Ignore AS path length for unlabeled unicast IPv4 routes | |
| Context | configure service vprn string bgp best-path-selection as-path-ignore ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Ignore AS path length for unlabeled unicast IPv6 routes | |
| Context | configure service vprn string bgp best-path-selection as-path-ignore ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Ignore AS path length for labeled-unicast IPv4 routes | |
| Context | configure service vprn string bgp best-path-selection as-path-ignore label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-ipv6 boolean
| Synopsis | Ignore AS path length for labeled unicast IPv6 routes | |
| Context | configure service vprn string bgp best-path-selection as-path-ignore label-ipv6 boolean | |
| Tree | label-ipv6 | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
compare-origin-validation-state boolean
| Synopsis | Allow comparison of origin validation states | |
| Context | configure service vprn string bgp best-path-selection compare-origin-validation-state boolean | |
| Tree | compare-origin-validation-state | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
d-path-length-ignore boolean
| Synopsis | Enable D-PATH length ignore | |
| Context | configure service vprn string bgp best-path-selection d-path-length-ignore boolean | |
| Tree | d-path-length-ignore | |
Description | When configured to true, this command, enables the router to ignore the D-PATH domain segment length during best-path selection. At the base router level (or VPRN BGP level for PE-CE routers), this command allows BGP to ignore the D-PATH domain segment length for best-path selection purposes. BGP ignores the D-PATH length when comparing two VPN routes or two IFL routes within the same RD. However, these VPN/IFL routes are processed in the main-BGP instance. At the VPRN router level, this command allows the VPRN RTM to ignore the D-PATH domain segment length for best-path selection purposes (for routes in VPRN). The user can control whether the RTM considers the D-PATH length when comparing two VPN routes with different RDs. Best-path selection for EVPN-IFF routes against other owners (for example, EVPN-IFL or IPVPN) still relies on RTM preference. When EVPN-IFF RTM preference matches the RTM preference of another BGP owner, the existing RTM selection applies and D-PATH is not considered, irrespective of the d-path-length-ignore configuration. When configured to false, this command disables the ability to ignore the D-PATH domain segment length. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
deterministic-med boolean
| Synopsis | Group paths based on AS before MED attribute comparison | |
| Context | configure service vprn string bgp best-path-selection deterministic-med boolean | |
| Tree | deterministic-med | |
Description | When configured to true, BGP groups paths from the same AS that are equal up to the MED attribute comparison and then compares the best path from each group to select the overall best path. This process ensures that the best-path selection process is deterministic in all cases. When configured to false, paths are not grouped and the overall best-path selection can depend on the order of route arrival. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ebgp-ibgp-equal
| Synopsis | Enter the ebgp-ibgp-equal context | |
| Context | configure service vprn string bgp best-path-selection ebgp-ibgp-equal | |
| Tree | ebgp-ibgp-equal | |
Description | Commands in this context allow BGP to ignore the difference between EBGP and IBGP routes in selecting the best path and eligible multipaths (if multipath and ECMP are enabled) for the specified address families. The result is a form of EIBGP load-balancing in a multipath scenario. This behavior can be applied selectively to certain address families. By default, the BGP decision process prefers an EBGP learned route over an IBGP learned route. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
| Synopsis | Consider EBGP and IBGP IPv4 routes equal | |
| Context | configure service vprn string bgp best-path-selection ebgp-ibgp-equal ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Consider EBGP and IBGP IPv6 routes equal | |
| Context | configure service vprn string bgp best-path-selection ebgp-ibgp-equal ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Consider EBGP and IBGP label-IPv4 routes equal | |
| Context | configure service vprn string bgp best-path-selection ebgp-ibgp-equal label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-ipv6 boolean
| Synopsis | Consider EBGP and IBGP label-IPv6 routes equal | |
| Context | configure service vprn string bgp best-path-selection ebgp-ibgp-equal label-ipv6 boolean | |
| Tree | label-ipv6 | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
ignore-nh-metric boolean
| Synopsis | Ignore next-hop distance in best path selection | |
| Context | configure service vprn string bgp best-path-selection ignore-nh-metric boolean | |
| Tree | ignore-nh-metric | |
Description | When configured to true, BGP ignores the resolved distance to the BGP next hop in its route selection process. When configured to false, BGP factors the distance to the next hop into its decision process when it compares two BGP routes with the same NLRI learned from base router BGP peers (in the router context) or IP prefix learned from VPRN BGP peers (in the vprn context). | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ignore-router-id
| Synopsis | Enable the ignore-router-id context | |
| Context | configure service vprn string bgp best-path-selection ignore-router-id | |
| Tree | ignore-router-id | |
Description | Commands in this context determine whether the BGP selection process ignores the BGP identifier (router ID) comparison of two EBGP paths from different EBGP peers when determining the best path for the specified address families. By default, BGP selects the path with the lower router ID when it compares two paths from EBGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
origin-invalid-unusable boolean
| Synopsis | Ignore routes with invalid origin validation state | |
| Context | configure service vprn string bgp best-path-selection origin-invalid-unusable boolean | |
| Tree | origin-invalid-unusable | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD | |
| Context | configure service vprn string bgp bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, BFD is enabled on all BGP sessions, subject to the association of those BGP sessions with IP interfaces that have BFD configurations. When configured to false, BFD is not enabled globally for all BGP sessions. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-strict-mode
| Synopsis | Enter the bfd-strict-mode context | |
| Context | configure service vprn string bgp bfd-strict-mode | |
| Tree | bfd-strict-mode | |
| Introduced | 23.7.R1 | |
Platforms | All |
advertise
| Synopsis | Enable the advertise context | |
| Context | configure service vprn string bgp bfd-strict-mode advertise | |
| Tree | advertise | |
Description | Commands in this context configure BGP to advertise the Strict-BFD capability to peers that are within scope of this command and meet the following requirements:
When the preceding conditions are satisfied and two peers attempting to form a session both advertise the Strict-BFD capability, the BGP finite state machine in each router transitions the session state to established after the BFD session with the peer enters the up state. When unconfigured, BGP does not advertise the Strict-BFD capability to peers. | |
| Introduced | 23.7.R1 | |
Platforms | All |
holdtime number
| Synopsis | Maximum time BGP waits for the BFD session to come up | |
| Context | configure service vprn string bgp bfd-strict-mode advertise holdtime number | |
| Tree | holdtime | |
Description | This command configures the maximum time BGP waits for the BFD session to come up, provided that the Strict-BFD procedures apply to a session, and the negotiated BGP hold time is zero (no keepalives). If the negotiated BGP hold time is greater than zero, the advertised hold time is not considered. | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 23.7.R1 | |
Platforms | All |
next-hop-reachability boolean
| Synopsis | Consider next hop unreachable if BFD session is down | |
| Context | configure service vprn string bgp bfd-strict-mode next-hop-reachability boolean | |
| Tree | next-hop-reachability | |
Description | When configured to true, the router considers next-hop self routes belonging to specific address families received from a peer within scope of this command as having an unresolved next hop, provided that the following requirements are met:
The unresolved state is maintained until the BFD session state changes to up or administratively down, even if there is a resolving route or tunnel that matches the BGP next-hop address. Routes received from one peer with a BGP next-hop address equal to the address of another peer are not affected by the BFD session to the other peer. The behavior of the router when this command is true does not depend on whether Strict-BFD is used, as both features are independent. Configuring this command to true only affects routes belonging to the following address families:
When configured to false, the router does not consider next-hop self routes belonging to the preceding address families as having an unresolved next hop if the BFD session goes down. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | All |
client-reflect boolean
| Synopsis | Allow client reflection of routes by route reflector | |
| Context | configure service vprn string bgp client-reflect boolean | |
| Tree | client-reflect | |
Description | When configured to true, routes received from neighbors considered to be RR clients are reflected to other peers as expected. When configured to false, routes received from neighbors considered to be RR clients are not reflected to other clients. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cluster
cluster-id string
| Synopsis | Route reflector cluster ID | |
| Context | configure service vprn string bgp cluster cluster-id string | |
| Tree | cluster-id | |
Description | The command specifies the cluster ID to associate with the routing instance, effectively making all IBGP peers of the routing instance RR clients. | |
| Introduced | 16.0.R1 | |
Platforms | All |
connect-retry number
| Synopsis | BGP connect retry timer value | |
| Context | configure service vprn string bgp connect-retry number | |
| Tree | connect-retry | |
Description | This command configures the BGP connect retry timer. When the timer expires, BGP tries to reconnect to the configured peer. | |
| Range | 1 to 65535 | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
convergence
| Synopsis | Enter the convergence context | |
| Context | configure service vprn string bgp convergence | |
| Tree | convergence | |
| Introduced | 19.7.R1 | |
Platforms | All |
family [family-type] keyword
[family-type] keyword
max-wait-to-advertise number
| Synopsis | Maximum wait time before advertising routes | |
| Context | configure service vprn string bgp convergence family keyword max-wait-to-advertise number | |
| Tree | max-wait-to-advertise | |
| Range | 0 to 3600 | |
| Default | 0 | |
| Introduced | 19.7.R1 | |
Platforms |
All |
min-wait-to-advertise number
| Synopsis | Minimum wait time before advertising routes | |
| Context | configure service vprn string bgp convergence min-wait-to-advertise number | |
| Tree | min-wait-to-advertise | |
| Range | 0 to 3600 | |
| Default | 0 | |
| Introduced | 19.7.R1 | |
Platforms |
All |
damp-peer-oscillations
| Synopsis | Enable the damp-peer-oscillations context | |
| Context | configure service vprn string bgp damp-peer-oscillations | |
| Tree | damp-peer-oscillations | |
Description | Commands in this context support the DampPeerOscillations FSM behavior described in section 8.1 of RFC 4271, A Border Gateway Protocol 4 (BGP-4). When unconfigured, the router does not perform peer oscillation damping and immediately transitions out of the idle state after every reset. | |
| Introduced | 16.0.R1 | |
Platforms | All |
error-interval number
| Synopsis | Time after a reset that the session must be error-free | |
| Context | configure service vprn string bgp damp-peer-oscillations error-interval number | |
| Tree | error-interval | |
Description | This command sets the interval of time after a reset, during which the session must be error-free in order to reset the penalty counter and return the idle hold time to the initial wait time. | |
| Range | 0 to 2048 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
idle-hold-time
| Synopsis | Enter the idle-hold-time context | |
| Context | configure service vprn string bgp damp-peer-oscillations idle-hold-time | |
| Tree | idle-hold-time | |
Description | Commands in this context configure how long a BGP peer session remains in the idle state after some type of error causes the session to reset. In the idle state, BGP does not initiate or respond to attempts to establish a new session. Repeated errors that occur in a short time period after each session reset cause longer and longer hold times in the idle state. | |
| Introduced | 16.0.R1 | |
Platforms | All |
initial-wait number
| Synopsis | Time session remains in idle state after stabilization | |
| Context | configure service vprn string bgp damp-peer-oscillations idle-hold-time initial-wait number | |
| Tree | initial-wait | |
| Range | 0 to 2048 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-wait number
| Synopsis | Maximum session idle time after repeated instability | |
| Context | configure service vprn string bgp damp-peer-oscillations idle-hold-time max-wait number | |
| Tree | max-wait | |
| Range | 1 to 2048 | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
second-wait number
| Synopsis | Time that doubles after each session failure | |
| Context | configure service vprn string bgp damp-peer-oscillations idle-hold-time second-wait number | |
| Tree | second-wait | |
Description | This command defines the hold time that doubles after each repeated session failure that occurs in a short span of time. | |
| Range | 1 to 2048 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
damping boolean
| Synopsis | Use BGP route damping to reduce route flap | |
| Context | configure service vprn string bgp damping boolean | |
| Tree | damping | |
Description | When configured to true, this command enables route damping to reduce the number of update messages sent between BGP peers and reduce the load on peers without affecting the route convergence time for stable routes. Route damping is controlled by profiles set in route policies. If no profile is specified in the route policy, the default damping profile is used with the following parameters:
When configured to false, BGP route damping for learned routes is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
default-label-preference
| Synopsis | Enter the default-label-preference context | |
| Context | configure service vprn string bgp default-label-preference | |
| Tree | default-label-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
default-preference
| Synopsis | Enter the default-preference context | |
| Context | configure service vprn string bgp default-preference | |
| Tree | default-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
description string
| Synopsis | Text description | |
| Context | configure service vprn string bgp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
domain-id string
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vprn string bgp domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 21.10.R1 | |
Platforms | All |
dynamic-neighbor-limit number
| Synopsis | Max dynamic BGP sessions to accept from remote peers | |
| Context | configure service vprn string bgp dynamic-neighbor-limit number | |
| Tree | dynamic-neighbor-limit | |
Description | This command configures the maximum number of dynamic BGP sessions to accept from remote peers associated with the entire BGP instance. If accepting a new dynamic session causes the instance limit to be exceeded, the new session attempt is rejected and a Notification message is sent back to the remote peer. | |
| Range | 1 to 8192 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ebgp-default-reject-policy
| Synopsis | Enter the ebgp-default-reject-policy context | |
| Context | configure service vprn string bgp ebgp-default-reject-policy | |
| Tree | ebgp-default-reject-policy | |
| Introduced | 19.5.R1 | |
Platforms | All |
export boolean
import boolean
eibgp-loadbalance boolean
| Synopsis | Use ECMP over BGP VPN and BGP routes | |
| Context | configure service vprn string bgp eibgp-loadbalance boolean | |
| Tree | eibgp-loadbalance | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
enforce-first-as boolean
| Synopsis | Enforce the configured peer AS value in received routes | |
| Context | configure service vprn string bgp enforce-first-as boolean | |
| Tree | enforce-first-as | |
Description | When configured to true for an EBGP session, all routes received from an EBGP peer are checked to ensure that the most recent ASN in the AS_PATH attribute of each route matches the configured AS of the session. If there is not a match, the session is reset (if the update-fault-tolerance command in the error-handling context is set to false) or the session is left up but the route is treated as withdrawn (if update-fault-tolerance is set to true). This command does not flap an established session because it applies only to routes received after the command is issued. When configured to false, received routes are not checked for compliance with the rule. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
error-handling
| Synopsis | Enter the error-handling context | |
| Context | configure service vprn string bgp error-handling | |
| Tree | error-handling | |
| Introduced | 16.0.R1 | |
Platforms | All |
update-fault-tolerance boolean
| Synopsis | Tolerate non-critical errors in UPDATE messages | |
| Context | configure service vprn string bgp error-handling update-fault-tolerance boolean | |
| Tree | update-fault-tolerance | |
Description | When configured to true, non-critical errors are handled with treat-as-withdraw, attribute-discard, and other non-disruptive approaches that do not cause a session reset. Critical errors still trigger a session reset. When configured to false, most errors trigger a session reset. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export
policy (policy-expr-string | string)
extended-nh-encoding
| Synopsis | Enter the extended-nh-encoding context | |
| Context | configure service vprn string bgp extended-nh-encoding | |
| Tree | extended-nh-encoding | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
family
flow-ipv4 boolean
flow-ipv6 boolean
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Advertise support for the label-IPv4 address family | |
| Context | configure service vprn string bgp family label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv4 boolean
| Synopsis | Advertise support for the MCAST-IPv4 address family | |
| Context | configure service vprn string bgp family mcast-ipv4 boolean | |
| Tree | mcast-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv6 boolean
| Synopsis | Advertise support for the MCAST-IPv6 address family | |
| Context | configure service vprn string bgp family mcast-ipv6 boolean | |
| Tree | mcast-ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fast-external-failover boolean
| Synopsis | Drop external BGP session immediately when link fails | |
| Context | configure service vprn string bgp fast-external-failover boolean | |
| Tree | fast-external-failover | |
Description | When configured to true, the router drops an external BGP session to a single-hop neighbor immediately when the local interface goes down. When configured to false, the BGP session remains up until the hold time expires. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
flowspec
validate-dest-prefix boolean
| Synopsis | Validate destination prefix in FlowSpec-IPv4/IPv6 route | |
| Context | configure service vprn string bgp flowspec validate-dest-prefix boolean | |
| Tree | validate-dest-prefix | |
Description | When configured to true, this command enables validation of received IPv4 and IPv6 FlowSpec routes that contain a destination-prefix subcomponent. A FlowSpec route with a destination-prefix subcomponent is considered invalid if both of the following are true:
An invalid route is retained in the BGP but it is not used for filtering traffic or propagated to other BGP routers. When configured to false, destination-prefix validation is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
validate-redirect-ip boolean
| Synopsis | Validate the redirect-to-IPv4 action in FlowSpec route | |
| Context | configure service vprn string bgp flowspec validate-redirect-ip boolean | |
| Tree | validate-redirect-ip | |
Description | When configured to true, this command enables procedures to validate the redirect-to-IPv4 action attached to FlowSpec-IPv4 routes that are received by the BGP instance. A FlowSpec-IPv4 route is considered invalid and is not installed as a filter rule if the FlowSpec-IPv4 route is deemed to have originated from a different AS than the IP route that resolves the redirection IPv4 address. The originating AS of a FlowSpec route is determined from its AS path. When configured to false, the validation check is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string bgp graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
gr-notification boolean
| Synopsis | Perform Graceful Restart procedures | |
| Context | configure service vprn string bgp graceful-restart gr-notification boolean | |
| Tree | gr-notification | |
Description | When configured to true, the Graceful Restart capability sent by the router indicates support for NOTIFICATION messages. If the peer also supports this capability, the session is restarted gracefully (while preserving forwarding) if either peer sends a NOTIFICATION message due to some type of event or error. When configured to false, NOTIFICATION messages are not supported. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
long-lived
| Synopsis | Enable the long-lived context | |
| Context | configure service vprn string bgp graceful-restart long-lived | |
| Tree | long-lived | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-stale-to-all-neighbors boolean
| Synopsis | Advertise stale routes to all BGP peers | |
| Context | configure service vprn string bgp graceful-restart long-lived advertise-stale-to-all-neighbors boolean | |
| Tree | advertise-stale-to-all-neighbors | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertised-stale-time number
| Synopsis | LLGR stale routes time | |
| Context | configure service vprn string bgp graceful-restart long-lived advertised-stale-time number | |
| Tree | advertised-stale-time | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
family [family-type] keyword
| Synopsis | Enter the family list instance | |
| Context | configure service vprn string bgp graceful-restart long-lived family keyword | |
| Tree | family | |
| Introduced | 16.0.R1 | |
Platforms | All |
[family-type] keyword
| Synopsis | Address family type for LLGR | |
| Context | configure service vprn string bgp graceful-restart long-lived family keyword | |
| Tree | family | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertised-stale-time number
| Synopsis | LLGR stale routes time for family override | |
| Context | configure service vprn string bgp graceful-restart long-lived family keyword advertised-stale-time number | |
| Tree | advertised-stale-time | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp graceful-restart long-lived family keyword helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
| Range | 0 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
forwarding-bits-set keyword
| Synopsis | BGP LLGR forwarding-bit behavior for address family | |
| Context | configure service vprn string bgp graceful-restart long-lived forwarding-bits-set keyword | |
| Tree | forwarding-bits-set | |
Description | This command determines the setting of the F bit in the GR and LLGR capabilities advertised by the router. When the F bit is set for an address family, it indicates that the advertising router is able to preserve forwarding state for the routes of that address family across the last restart. When the session is re-established after a restart and the F bit is not set, all stale routes from the peer are immediately removed for the corresponding address family. This command allows the F bit to be set for all address families or only for non-forwarding address families (L2-VPN, route target, flow-IPv4, and flow-IPv6). | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-restart-time number
| Synopsis | Locally-configured override for restart time | |
| Context | configure service vprn string bgp graceful-restart long-lived helper-override-restart-time number | |
| Tree | helper-override-restart-time | |
Description | This command overrides the restart time advertised by a peer (in its GR capability) with a locally-configured value. This override applies only to AFI/SAFI that were included in the GR capability of the peer. The restart-time is always zero for AFI/SAFI not included in the GR capability. This command is useful if the local router wants to force the LLGR phase to begin after a set time for all protected AFI/SAFI. | |
| Range | 0 to 4095 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp graceful-restart long-lived helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
Description | This command configures a locally-imposed LLGR stale time that overrides the long-lived stale routes time that is advertised by the router in its LLGR capability. This command applies to all AFI/SAFI in the advertised LLGR capability except for any AFI/SAFI with a family-specific override. | |
| Range | 0 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
without-no-export boolean
| Synopsis | Advertise LLGR stale routes to non-LLGR peers | |
| Context | configure service vprn string bgp graceful-restart long-lived without-no-export boolean | |
| Tree | without-no-export | |
Description | When configured to true, LLGR stale routes can be advertised to any peer (EBGP or IBGP) that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0. When configured to false, LLGR stale routes are not advertised to any EBGP peer that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0 and a NO_EXPORT standard community is automatically added to the routes. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
restart-time number
| Synopsis | Restart time advertised by GR capability | |
| Context | configure service vprn string bgp graceful-restart restart-time number | |
| Tree | restart-time | |
| Range | 0 to 4095 | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-routes-time number
| Synopsis | Maximum time to maintain routes after graceful restart | |
| Context | configure service vprn string bgp graceful-restart stale-routes-time number | |
| Tree | stale-routes-time | |
| Range | 1 to 3600 | |
| Default | 360 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
group [group-name] string
[group-name] string
admin-state keyword
| Synopsis | Administrative state of the BGP group | |
| Context | configure service vprn string bgp group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-inactive boolean
| Synopsis | Advertise an inactive BGP route to peers | |
| Context | configure service vprn string bgp group string advertise-inactive boolean | |
| Tree | advertise-inactive | |
Description | When configured to true, this command allows an inactive BGP route to be advertised, even though it is not the most preferred route. The effect of the command on advertised unlabeled, labeled, and multicast IPv4 and IPv6 routes depends on several factors.
When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, the advertisement of inactive BGP routes to other BGP peers is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-ipv6-next-hops
| Synopsis | Enable the advertise-ipv6-next-hops context | |
| Context | configure service vprn string bgp group string advertise-ipv6-next-hops | |
| Tree | advertise-ipv6-next-hops | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
aggregator-id-zero boolean
| Synopsis | Set router ID in the BGP AGGREGATOR attribute to zero | |
| Context | configure service vprn string bgp group string aggregator-id-zero boolean | |
| Tree | aggregator-id-zero | |
| Introduced | 16.0.R1 | |
Platforms | All |
as-override boolean
| Synopsis | Replace the peer's ASN with the local ASN in AS Path | |
| Context | configure service vprn string bgp group string as-override boolean | |
| Tree | as-override | |
Description | When configured to true, the advertising router's local AS replaces all occurrences of the peer AS in the AS_PATH attribute. This command should be used with caution, as it breaks BGP's loop detection mechanism. When configured to false, no AS override is performed. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
asn-4-byte boolean
| Synopsis | Advertise the use of 4-byte ASNs | |
| Context | configure service vprn string bgp group string asn-4-byte boolean | |
| Tree | asn-4-byte | |
Description | When this command inherits a value of true, the use of 4-byte ASNs is supported. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When configured to false, this command disables the use of 4-byte ASNs. | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | BGP authentication key for peers in the group | |
| Context | configure service vprn string bgp group string authentication-key string | |
| Tree | authentication-key | |
Description | This command configures the authentication key that must be configured on both peers. The stored format of the authentication key is based on the configure system security hash-control management-interface md-cli hash-algorithm setting. | |
| String Length | 1 to 370 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | TCP authentication keychain for the session | |
| Context | configure service vprn string bgp group string authentication-keychain reference | |
| Tree | authentication-keychain | |
Description | This command associates the keychain to be used to authenticate the BGP session. The keychain allows the rollover of authentication keys during the lifetime of a session. | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD | |
| Context | configure service vprn string bgp group string bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, BFD is enabled on a given protocol interface where the state of the protocol interface is tied to the state of the BFD session between the local node and the remote node. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, BFD is removed from the associated protocol adjacency. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-strict-mode
| Synopsis | Enter the bfd-strict-mode context | |
| Context | configure service vprn string bgp group string bfd-strict-mode | |
| Tree | bfd-strict-mode | |
| Introduced | 23.7.R1 | |
Platforms | All |
advertise
| Synopsis | Enable the advertise context | |
| Context | configure service vprn string bgp group string bfd-strict-mode advertise | |
| Tree | advertise | |
Description | Commands in this context configure BGP to advertise the Strict-BFD capability to peers that are within scope of this command and meet the following requirements:
When the preceding conditions are satisfied and two peers attempting to form a session both advertise the Strict-BFD capability, the BGP finite state machine in each router transitions the session state to established after the BFD session with the peer enters the up state. When unconfigured, BGP does not advertise the Strict-BFD capability to peers. | |
| Introduced | 23.7.R1 | |
Platforms | All |
holdtime number
| Synopsis | Maximum time BGP waits for the BFD session to come up | |
| Context | configure service vprn string bgp group string bfd-strict-mode advertise holdtime number | |
| Tree | holdtime | |
Description | This command configures the maximum time BGP waits for the BFD session to come up, provided that the Strict-BFD procedures apply to a session, and the negotiated BGP hold time is zero (no keepalives). If the negotiated BGP hold time is greater than zero, the advertised hold time is not considered. | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 23.7.R1 | |
Platforms | All |
next-hop-reachability boolean
| Synopsis | Consider next hop unreachable if BFD session is down | |
| Context | configure service vprn string bgp group string bfd-strict-mode next-hop-reachability boolean | |
| Tree | next-hop-reachability | |
Description | When configured to true, the router considers next-hop self routes belonging to specific address families received from a peer within scope of this command as having an unresolved next hop, provided that the following requirements are met:
The unresolved state is maintained until the BFD session state changes to up or administratively down, even if there is a resolving route or tunnel that matches the BGP next-hop address. Routes received from one peer with a BGP next-hop address equal to the address of another peer are not affected by the BFD session to the other peer. The behavior of the router when this command is true does not depend on whether Strict-BFD is used, as both features are independent. Configuring this command to true only affects routes belonging to the following address families:
When configured to false, the router does not consider next-hop self routes belonging to the preceding address families as having an unresolved next hop if the BFD session goes down. | |
| Introduced | 23.7.R1 | |
Platforms | All |
capability-negotiation boolean
| Synopsis | Enable capability negotiation | |
| Context | configure service vprn string bgp group string capability-negotiation boolean | |
| Tree | capability-negotiation | |
Description | When configured to true, this command enables the exchange of capabilities. When configured to false and the peering is flapped, new capabilities are not negotiated and strictly IPv4 exchanges are supported with the peer. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
client-reflect boolean
| Synopsis | Allow cluster RR to advertise routes to its clients | |
| Context | configure service vprn string bgp group string client-reflect boolean | |
| Tree | client-reflect | |
Description | When unconfigured, this command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When the command inherits a value of true, client reflection of routes is enabled. When configured to false, this command disables client reflection of routes. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cluster
cluster-id string
| Synopsis | Route reflector cluster ID | |
| Context | configure service vprn string bgp group string cluster cluster-id string | |
| Tree | cluster-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
connect-retry number
| Synopsis | BGP connect retry timer value | |
| Context | configure service vprn string bgp group string connect-retry number | |
| Tree | connect-retry | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
damp-peer-oscillations
| Synopsis | Enable the damp-peer-oscillations context | |
| Context | configure service vprn string bgp group string damp-peer-oscillations | |
| Tree | damp-peer-oscillations | |
Description | Commands in this context specify how long a BGP peer session remains in the idle state after an error causes the session to reset. In the idle state, BGP does not initiate or respond to attempts to establish a new session. Repeated errors that occur a short time after each session reset cause longer and longer hold times in the idle state. When unconfigured, command settings are inherited from the global-level configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
error-interval number
| Synopsis | Time after a reset that the session must be error-free | |
| Context | configure service vprn string bgp group string damp-peer-oscillations error-interval number | |
| Tree | error-interval | |
Description | This command sets the interval of time after a reset, during which the session must be error-free in order to reset the penalty counter and return the idle hold time to the initial wait time. | |
| Range | 0 to 2048 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
idle-hold-time
| Synopsis | Enter the idle-hold-time context | |
| Context | configure service vprn string bgp group string damp-peer-oscillations idle-hold-time | |
| Tree | idle-hold-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
initial-wait number
| Synopsis | Time session remains in idle state after stabilization | |
| Context | configure service vprn string bgp group string damp-peer-oscillations idle-hold-time initial-wait number | |
| Tree | initial-wait | |
| Range | 0 to 2048 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-wait number
| Synopsis | Maximum session idle time after repeated instability | |
| Context | configure service vprn string bgp group string damp-peer-oscillations idle-hold-time max-wait number | |
| Tree | max-wait | |
| Range | 1 to 2048 | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
second-wait number
| Synopsis | Time that doubles after each repeated session failure | |
| Context | configure service vprn string bgp group string damp-peer-oscillations idle-hold-time second-wait number | |
| Tree | second-wait | |
Description | This command defines the hold time that doubles after each repeated session failure that occurs in a short span of time. | |
| Range | 1 to 2048 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
damping boolean
default-label-preference
| Synopsis | Enter the default-label-preference context | |
| Context | configure service vprn string bgp group string default-label-preference | |
| Tree | default-label-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
default-preference
| Synopsis | Enter the default-preference context | |
| Context | configure service vprn string bgp group string default-preference | |
| Tree | default-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
description string
| Synopsis | Text description | |
| Context | configure service vprn string bgp group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dynamic-neighbor
| Synopsis | Enter the dynamic-neighbor context | |
| Context | configure service vprn string bgp group string dynamic-neighbor | |
| Tree | dynamic-neighbor | |
Description | Commands in this context configure dynamic BGP sessions for a peer group. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] reference
| Synopsis | Enter the interface list instance | |
| Context | configure service vprn string bgp group string dynamic-neighbor interface reference | |
| Tree | interface | |
Description | Commands in this context configure an unnumbered VPRN access IP interface for dynamic neighbors. If this interface connects to a network with other BGP routers, sessions with the other routers can be set up automatically without explicitly configuring them as BGP neighbors. The interface must be IPv6 enabled, but because the interface is considered unnumbered, it does not require an IPv4 address or a global-unicast IPv6 address. The sessions are set up using IPv6 link-local addresses. The BGP unnumbered feature supports all address families that allow IPv6 link-local BGP next-hop addresses. This includes IPv4 with the use of RFC 8950 extensions. When an interface is added to the list of dynamic-neighbor interfaces, an outgoing connection attempt is initiated toward any directly connected router on the interface that announces itself using an ICMPv6 router advertisement message. The session attempt is unsuccessful if the peer type is not EBGP, the reported AS number of the peer does not match one of the allowed values, or the maximum session limit of the interface would be exceeded. | |
| Introduced | 22.10.R1 | |
Platforms | All |
[interface-name] reference
allowed-peer-as string
| Synopsis | Allowed peer AS value or range of acceptable values | |
| Context | configure service vprn string bgp group string dynamic-neighbor interface reference allowed-peer-as string | |
| Tree | allowed-peer-as | |
Description | This command specifies a singular allowed peer AS value or a range of acceptable values in the format n1..n2. All values greater than or equal to n1 and less than or equal to n2 are acceptable. For example, if the acceptable peer AS numbers are 65001 to 65005 (range) and 62100 (singular value), configure this command to use a value of [65001..65005 62100]. | |
| Max. Instances | 32 | |
Notes | This element is ordered by the user. | |
| Introduced | 22.10.R1 | |
Platforms | All |
max-sessions number
| Synopsis | Maximum number of dynamic sessions allowed | |
| Context | configure service vprn string bgp group string dynamic-neighbor interface reference max-sessions number | |
| Tree | max-sessions | |
Description | This command specifies the maximum number of dynamic sessions that are allowed to be set up on the interface as a result of accepting sessions from link-local addresses or initiating sessions by receiving IPv6 router advertisements. | |
| Range | 1 to 255 | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms |
All |
match
prefix [ip-prefix] (ipv4-prefix | ipv6-prefix)
[ip-prefix] (ipv4-prefix | ipv6-prefix)
allowed-peer-as string
| Synopsis | Allowed peer AS value or range of acceptable values | |
| Context | configure service vprn string bgp group string dynamic-neighbor match prefix (ipv4-prefix | ipv6-prefix) allowed-peer-as string | |
| Tree | allowed-peer-as | |
Description | This command specifies a singular allowed peer AS value or a range of acceptable values in the format n1..n2. All values greater than or equal to n1 and less than or equal to n2 are acceptable. For example, if the acceptable peer AS numbers are 65001 to 65005 (range) and 62100 (singular value), configure this command to use a value of [65001..65005 62100]. | |
| Max. Instances | 32 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.5.R1 | |
Platforms | All |
dynamic-neighbor-limit number
| Synopsis | Maximum dynamic BGP sessions to accept from remote peer | |
| Context | configure service vprn string bgp group string dynamic-neighbor-limit number | |
| Tree | dynamic-neighbor-limit | |
Description | This command configures the maximum number of dynamic BGP sessions that are accepted from remote peers associated with a specific peer group. If accepting a new dynamic session causes the group limit to be exceeded, the new session attempt is rejected and a Notification message is sent back to the remote peer. When unconfigured, the setting is inherited from the BGP global-level configuration. | |
| Range | 1 to 8192 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ebgp-default-reject-policy
| Synopsis | Enable the ebgp-default-reject-policy context | |
| Context | configure service vprn string bgp group string ebgp-default-reject-policy | |
| Tree | ebgp-default-reject-policy | |
| Introduced | 19.5.R1 | |
Platforms | All |
export boolean
import boolean
enforce-first-as boolean
| Synopsis | Enforce the configured peer AS value in received routes | |
| Context | configure service vprn string bgp group string enforce-first-as boolean | |
| Tree | enforce-first-as | |
| Introduced | 16.0.R1 | |
Platforms | All |
error-handling
| Synopsis | Enter the error-handling context | |
| Context | configure service vprn string bgp group string error-handling | |
| Tree | error-handling | |
| Introduced | 16.0.R1 | |
Platforms | All |
update-fault-tolerance boolean
| Synopsis | Tolerate non-critical errors in UPDATE messages | |
| Context | configure service vprn string bgp group string error-handling update-fault-tolerance boolean | |
| Tree | update-fault-tolerance | |
Description | When configured to true, non-critical errors are handled with treat-as-withdraw, attribute-discard, and other non-disruptive approaches that do not cause a session reset. Critical errors still trigger a session reset. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, all errors trigger a session reset. | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-link-bandwidth
| Synopsis | Enter the evpn-link-bandwidth context | |
| Context | configure service vprn string bgp group string evpn-link-bandwidth | |
| Tree | evpn-link-bandwidth | |
| Introduced | 22.7.R1 | |
Platforms | All |
add-to-received-bgp number
| Synopsis | Weight added to received PE-CE BGP routes | |
| Context | configure service vprn string bgp group string evpn-link-bandwidth add-to-received-bgp number | |
| Tree | add-to-received-bgp | |
Description | This command configures the weight value added to all BGP PE-CE routes for the purpose of weighted ECMP if EVPN-IFL and BGP PE-CE routes are combined into the same ECMP set. For the load-balancing betweeen EVPN-IFL and BGP PE-CE routes the configure service vprn bgp eibgp-loadbalance command must already be configured in the system. | |
| Range | 1 to 128 | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
export
policy (policy-expr-string | string)
extended-nh-encoding
| Synopsis | Enable the extended-nh-encoding context | |
| Context | configure service vprn string bgp group string extended-nh-encoding | |
| Tree | extended-nh-encoding | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
family
flow-ipv4 boolean
flow-ipv6 boolean
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Advertise support for the label-IPv4 address family | |
| Context | configure service vprn string bgp group string family label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv4 boolean
| Synopsis | Advertise support for the MCAST-IPv4 address family | |
| Context | configure service vprn string bgp group string family mcast-ipv4 boolean | |
| Tree | mcast-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv6 boolean
| Synopsis | Advertise support for the MCAST-IPv6 address family | |
| Context | configure service vprn string bgp group string family mcast-ipv6 boolean | |
| Tree | mcast-ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fast-external-failover boolean
| Synopsis | Drop external BGP session immediately when link fails | |
| Context | configure service vprn string bgp group string fast-external-failover boolean | |
| Tree | fast-external-failover | |
Description | When this command inherits a value of true, the router drops an external BGP session on a single-hop route immediately when the local interface goes down. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When configured to false, the BGP session remains up until the hold time expires. | |
| Introduced | 16.0.R1 | |
Platforms | All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string bgp group string graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
gr-notification boolean
| Synopsis | Perform graceful restart procedures after NOTIFICATION | |
| Context | configure service vprn string bgp group string graceful-restart gr-notification boolean | |
| Tree | gr-notification | |
Description | When configured to true, the Graceful Restart capability sent by the router indicates support for NOTIFICATION messages. If the peer also supports this capability, the session is restarted gracefully (while preserving forwarding) if either peer sends a NOTIFICATION message due to some type of event or error. When configured to false, NOTIFICATION messages are not supported. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
long-lived
| Synopsis | Enable the long-lived context | |
| Context | configure service vprn string bgp group string graceful-restart long-lived | |
| Tree | long-lived | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-stale-to-all-neighbors boolean
| Synopsis | Advertise stale routes to all BGP peers | |
| Context | configure service vprn string bgp group string graceful-restart long-lived advertise-stale-to-all-neighbors boolean | |
| Tree | advertise-stale-to-all-neighbors | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertised-stale-time number
| Synopsis | Advertised long-lived stale time for LLGR routes | |
| Context | configure service vprn string bgp group string graceful-restart long-lived advertised-stale-time number | |
| Tree | advertised-stale-time | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
family [family-type] keyword
| Synopsis | Enter the family list instance | |
| Context | configure service vprn string bgp group string graceful-restart long-lived family keyword | |
| Tree | family | |
| Introduced | 16.0.R1 | |
Platforms | All |
[family-type] keyword
| Synopsis | Address family type for LLGR | |
| Context | configure service vprn string bgp group string graceful-restart long-lived family keyword | |
| Tree | family | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertised-stale-time number
| Synopsis | LLGR stale routes time for family override | |
| Context | configure service vprn string bgp group string graceful-restart long-lived family keyword advertised-stale-time number | |
| Tree | advertised-stale-time | |
Description | This command configures the long-lived stale routes time that is advertised by the router in its LLGR capability. This command applies to all AFI/SAFI in the advertised LLGR capability with a family-specific override. | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp group string graceful-restart long-lived family keyword helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
Description | This command configures a locally-imposed LLGR stale time that overrides the long-lived stale routes time that is advertised by the router in its LLGR capability. This is a family-specific override value. | |
| Range | 0 to 16777216 | |
| Default | 16777216 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
forwarding-bits-set keyword
| Synopsis | BGP LLGR forwarding-bit behavior for address family | |
| Context | configure service vprn string bgp group string graceful-restart long-lived forwarding-bits-set keyword | |
| Tree | forwarding-bits-set | |
Description | This command determines the setting of the F bit in the GR and LLGR capabilities advertised by the router. When the F bit is set for an address family, it indicates that the advertising router is able to preserve forwarding state for the routes of that address family across the last restart. When the session is re-established after a restart and the F bit is not set, all stale routes from the peer are immediately removed for the corresponding address family. This command allows the F bit to be set for all address families or only for non-forwarding address families (L2-VPN, route target, flow-IPv4, and flow-IPv6). | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-restart-time number
| Synopsis | Locally-configured override for restart time | |
| Context | configure service vprn string bgp group string graceful-restart long-lived helper-override-restart-time number | |
| Tree | helper-override-restart-time | |
Description | This command overrides the restart time advertised by a peer (in its GR capability) with a locally-configured value. This override applies only to AFI/SAFI that were included in the GR capability of the peer. The restart-time is always zero for AFI/SAFI not included in the GR capability. This command is useful if the local router wants to force the LLGR phase to begin after a set time for all protected AFI/SAFI. | |
| Range | 0 to 4095 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp group string graceful-restart long-lived helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
Description | This command configures a locally-imposed LLGR stale time that overrides the long-lived stale routes time that is advertised by the router in its LLGR capability. This command applies to all AFI/SAFI in the advertised LLGR capability except for any AFI/SAFI with a family-specific override. | |
| Range | 0 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
without-no-export boolean
| Synopsis | Advertise LLGR stale routes to non-LLGR peers | |
| Context | configure service vprn string bgp group string graceful-restart long-lived without-no-export boolean | |
| Tree | without-no-export | |
Description | When configured to true, LLGR stale routes can be advertised to any peer (EBGP or IBGP) that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0. When configured to false, LLGR stale routes are not advertised to any EBGP peer that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0 and a NO_EXPORT standard community is automatically added to the routes. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
restart-time number
| Synopsis | Restart time advertised by GR capability | |
| Context | configure service vprn string bgp group string graceful-restart restart-time number | |
| Tree | restart-time | |
| Range | 0 to 4095 | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-routes-time number
| Synopsis | Maximum time to maintain routes after graceful restart | |
| Context | configure service vprn string bgp group string graceful-restart stale-routes-time number | |
| Tree | stale-routes-time | |
| Range | 1 to 3600 | |
| Default | 360 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hold-time
minimum-hold-time number
| Synopsis | Minimum hold time between successive messages | |
| Context | configure service vprn string bgp group string hold-time minimum-hold-time number | |
| Tree | minimum-hold-time | |
Description | This command specifies the minimum hold time that is accepted for the session. If a peer proposes a hold time lower than this value, the session attempt is rejected. When unconfigured, the command value is inherited from the BGP global-level setting. | |
| Range | 0 | 3 to 65536 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Maximum time BGP waits between successive messages | |
| Context | configure service vprn string bgp group string hold-time seconds number | |
| Tree | seconds | |
Description | This command configures the maximum time BGP waits between successive messages (either keepalive or update) from its peer before closing the connection. Although the implementation allows setting the keepalive timer at the BGP group level times separately, the configured keepalive timer is overridden by this value under the following circumstances.
When unconfigured, the command setting is inherited from the BGP global-level configuration. | |
| Range | 0 | 3 to 65535 | |
| Introduced | 16.0.R1 | |
Platforms | All |
import
policy (policy-expr-string | string)
initial-send-delay-zero boolean
| Synopsis | Send BGP updates as soon as the session comes up | |
| Context | configure service vprn string bgp group string initial-send-delay-zero boolean | |
| Tree | initial-send-delay-zero | |
Description | When configured to true, BGP updates are sent as soon as the session comes up. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, BGP waits to send UPDATE messages for the minimum route advertisement time after a session is established. | |
| Introduced | 16.0.R1 | |
Platforms | All |
keepalive number
| Synopsis | Time after which the BGP KEEPALIVE message is sent | |
| Context | configure service vprn string bgp group string keepalive number | |
| Tree | keepalive | |
Description | This command configures the BGP keepalive timer value. A keepalive message is sent every time this timer expires. This value is generally one-third of the hold time interval configured in the hold-time seconds context. Although the implementation allows this keepalive value and the hold time interval to be independently set, under the following circumstances, the configured keepalive value is overridden by the hold time interval value:
When unconfigured, the command inherits the BGP global-level setting. | |
| Range | 0 to 21845 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
label-preference number
| Synopsis | Route preference for routes from labeled-unicast peers | |
| Context | configure service vprn string bgp group string label-preference number | |
| Tree | label-preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-bandwidth
| Synopsis | Enter the link-bandwidth context | |
| Context | configure service vprn string bgp group string link-bandwidth | |
| Tree | link-bandwidth | |
Description | Commands in this context specify the handling of the Link Bandwidth Extended Community attached to specific BGP routes. When all used multipaths of an IP prefix correspond to BGP routes with a Link Bandwidth EC, the datapath is programmed to use weighted ECMP across the BGP next hops in proportion to the bandwidth values. | |
| Introduced | 16.0.R3 | |
Platforms | All |
accept-from-ebgp
| Synopsis | Enter the accept-from-ebgp context | |
| Context | configure service vprn string bgp group string link-bandwidth accept-from-ebgp | |
| Tree | accept-from-ebgp | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth accept-from-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp group string link-bandwidth accept-from-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth accept-from-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
add-to-received-ebgp
| Synopsis | Enter the add-to-received-ebgp context | |
| Context | configure service vprn string bgp group string link-bandwidth add-to-received-ebgp | |
| Tree | add-to-received-ebgp | |
| Introduced | 16.0.R3 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth add-to-received-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp group string link-bandwidth add-to-received-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth add-to-received-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
aggregate-used-paths
| Synopsis | Enter the aggregate-used-paths context | |
| Context | configure service vprn string bgp group string link-bandwidth aggregate-used-paths | |
| Tree | aggregate-used-paths | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth aggregate-used-paths ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp group string link-bandwidth aggregate-used-paths ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth aggregate-used-paths label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
send-to-ebgp
| Synopsis | Enter the send-to-ebgp context | |
| Context | configure service vprn string bgp group string link-bandwidth send-to-ebgp | |
| Tree | send-to-ebgp | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth send-to-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp group string link-bandwidth send-to-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp group string link-bandwidth send-to-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name)
| Synopsis | Local IP address used when communicating with BGP peers | |
| Context | configure service vprn string bgp group string local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name) | |
| Tree | local-address | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-as
as-number number
prepend-global-as boolean
| Synopsis | Prepend global ASN when advertising routes to BGP peer | |
| Context | configure service vprn string bgp group string local-as prepend-global-as boolean | |
| Tree | prepend-global-as | |
Description | When configured to true, the global ASN is added to the AS_PATH attribute in outbound routes sent to the peer. When configured to false, the global ASN is not included in the AS_PATH attribute. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
private boolean
| Synopsis | Hide the local ASN in sent paths learned from peering | |
| Context | configure service vprn string bgp group string local-as private boolean | |
| Tree | private | |
Description | When configured to true, the local AS number is only advertised to peers that use the local ASN for establishing BGP peering sessions. When configured to false, the local ASN is advertised to all peers, including those that can use the global ASN for establishing BGP peering sessions. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-preference number
| Synopsis | Default local preference if not in incoming routes | |
| Context | configure service vprn string bgp group string local-preference number | |
| Tree | local-preference | |
| Range | 0 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
loop-detect keyword
| Synopsis | Strategy for loop detection in the AS path | |
| Context | configure service vprn string bgp group string loop-detect keyword | |
| Tree | loop-detect | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
loop-detect-threshold number
| Synopsis | Threshold for the global ASN in a received AS path | |
| Context | configure service vprn string bgp group string loop-detect-threshold number | |
| Tree | loop-detect-threshold | |
| Range | 0 to 15 | |
| Introduced | 16.0.R6 | |
|
Platforms | All |
med-out (number | keyword)
min-route-advertisement number
| Synopsis | Minimum time before a prefix can be advertised to peer | |
| Context | configure service vprn string bgp group string min-route-advertisement number | |
| Tree | min-route-advertisement | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
monitor
admin-state keyword
| Synopsis | Administrative state of BMP monitoring | |
| Context | configure service vprn string bgp group string monitor admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
all-stations boolean
| Synopsis | Send BMP messages to all configured stations | |
| Context | configure service vprn string bgp group string monitor all-stations boolean | |
| Tree | all-stations | |
Description | When configured to true, this command specifies that BMP messages are to be sent to all configured BMP monitoring stations. When configured to false, the command is not used to indicate the stations which can receive BMP messages. The station command (at the same context level) identifies the BMP stations for which BMP messages are to be sent. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-monitoring
| Synopsis | Enter the route-monitoring context | |
| Context | configure service vprn string bgp group string monitor route-monitoring | |
| Tree | route-monitoring | |
| Introduced | 16.0.R1 | |
Platforms | All |
post-policy boolean
| Synopsis | Allow post-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp group string monitor route-monitoring post-policy boolean | |
| Tree | post-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pre-policy boolean
| Synopsis | Allow pre-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp group string monitor route-monitoring pre-policy boolean | |
| Tree | pre-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
station [station-name] reference
[station-name] reference
multihop number
multipath-eligible boolean
| Synopsis | Allow routes from group peers in multipath eligibility | |
| Context | configure service vprn string bgp group string multipath-eligible boolean | |
| Tree | multipath-eligible | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
next-hop-self boolean
| Synopsis | Advertise routes with local address as next-hop address | |
| Context | configure service vprn string bgp group string next-hop-self boolean | |
| Tree | next-hop-self | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
origin-validation
| Synopsis | Enter the origin-validation context | |
| Context | configure service vprn string bgp group string origin-validation | |
| Tree | origin-validation | |
| Introduced | 19.7.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Enable support for labeled-unicast IPv4 routes | |
| Context | configure service vprn string bgp group string origin-validation label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
passive boolean
path-mtu-discovery boolean
| Synopsis | Enable Path MTU Discovery | |
| Context | configure service vprn string bgp group string path-mtu-discovery boolean | |
| Tree | path-mtu-discovery | |
Description | When configured to true, Path MTU Discovery (PMTUD) is enabled for the associated TCP connections. When set to true, PMTUD is activated toward an IPv4 BGP neighbor and the Don’t Fragment (DF) bit is set in the IP header of all IPv4 packets sent to the peer. If any device along the path toward the peer cannot forward the packet because the IP MTU of the interface is smaller than the IP packet size, this device drops the packet and sends an ICMP or ICMPv6 error message encoding the interface MTU. When the router receives the ICMP or ICMPv6 message, it lowers the TCP maximum segment size limit from the previous value so that the IP MTU constraint can be accommodated. When configured to false and there is no TCP MSS configuration that can be associated with a BGP neighbor (in either the BGP configuration or the first hop IP interface configuration), the router advertises a value of only 1024 bytes as the TCP MSS option value, limiting received TCP segments to that size. | |
| Introduced | 16.0.R1 | |
Platforms | All |
peer-as number
peer-ip-tracking boolean
| Synopsis | Enable BGP peer tracking | |
| Context | configure service vprn string bgp group string peer-ip-tracking boolean | |
| Tree | peer-ip-tracking | |
Description | When configured to true, this command enables BGP peer tracking. Peer tracking should be used with caution. Peer tracking can tear a session down even if the loss of connectivity turns out to be short-lived (for example, while the IGP protocol is re-converging). Next-hop tracking, which is always enabled, handles temporary connectivity issues more effectively. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, peer tracking is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
preference number
| Synopsis | Route preference for routes learned from all peers | |
| Context | configure service vprn string bgp group string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-limit [family] keyword
| Synopsis | Enter the prefix-limit list instance | |
| Context | configure service vprn string bgp group string prefix-limit keyword | |
| Tree | prefix-limit | |
Description | Commands in this context limit the number of BGP routes per address family received from a BGP peer and define the actions when crossing the configured maximum. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[family] keyword
| Synopsis | Address family to which the limit applies | |
| Context | configure service vprn string bgp group string prefix-limit keyword | |
| Tree | prefix-limit | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-excess number
| Synopsis | Percentage of maximum routes to install in route table | |
| Context | configure service vprn string bgp group string prefix-limit keyword hold-excess number | |
| Tree | hold-excess | |
Description | This command specifies the percentage of maximum routes that are allowed to be installed in the route table for the configured address family. If a peer within scope of the configuration exceeds the limit, the overflow routes are held in the BGP RIB as inactive routes and are ineligible for forwarding and advertisement to other peers. If the post-import command is configured to true, only routes not rejected by import policies count toward the limit. A BGP route in an overflow state is reconsidered for activation and reinstallation when an UPDATE message is received for the route. This command is mutually exclusive with the idle-timeout and log-only commands. | |
| Range | 1 to 100 | |
| Introduced | 23.7.R1 | |
|
Platforms | All |
idle-timeout number
| Synopsis | Time BGP peering remains idle before reconnecting | |
| Context | configure service vprn string bgp group string prefix-limit keyword idle-timeout number | |
| Tree | idle-timeout | |
Description | This command configures the time in minutes before a BGP peer is automatically re-established after reaching the prefix limit. When unconfigured, the BGP peer stays down until the operator performs a reset. This command and log-only cannot be configured simultaneously. | |
| Range | 1 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
log-only boolean
| Synopsis | Send warning message at threshold instead of take-down | |
| Context | configure service vprn string bgp group string prefix-limit keyword log-only boolean | |
| Tree | log-only | |
Description | When configured to true, the router disables the BGP session from being taken down upon reaching the prefix limit. Instead, only a warning message is sent when the limit is reached. A warning message is also sent when the configured threshold percentage of the limit is reached. This command and idle-timeout cannot be configured simultaneously. When configured to false, the router generates a log event and takes the BGP session down upon reaching the prefix limit. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum number
| Synopsis | Maximum number of routes to be learned from a peer | |
| Context | configure service vprn string bgp group string prefix-limit keyword maximum number | |
| Tree | maximum | |
Description | This command configures the maximum number of BGP routes of the specified address family that can be received from a peer before administrative action is taken. When log-only is unconfigured, the BGP session is taken down whenever the limit of any family is exceeded even if the limits of the other family has not been exceeded. | |
| Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R2 | |
Platforms | All |
post-import boolean
| Synopsis | Apply limit only to routes accepted by import policies | |
| Context | configure service vprn string bgp group string prefix-limit keyword post-import boolean | |
| Tree | post-import | |
Description | When configured to true, the system limits the number of routes that are accepted by import policies. Routes rejected by import policies are not counted against the configured limit. When configured to false, the system limits the number of routes to all routes received from the peer. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
remove-private
| Synopsis | Enable the remove-private context | |
| Context | configure service vprn string bgp group string remove-private | |
| Tree | remove-private | |
| Introduced | 16.0.R1 | |
Platforms | All |
limited boolean
replace boolean
skip-peer-as boolean
| Synopsis | Keep private ASN if it is the same as the BGP peer ASN | |
| Context | configure service vprn string bgp group string remove-private skip-peer-as boolean | |
| Tree | skip-peer-as | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-communities
| Synopsis | Enter the send-communities context | |
| Context | configure service vprn string bgp group string send-communities | |
| Tree | send-communities | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended boolean
| Synopsis | Advertise the Extended Communities attribute to peers | |
| Context | configure service vprn string bgp group string send-communities extended boolean | |
| Tree | extended | |
Description | When unconfigured, this command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP extended communities are sent to peers in the Extended Communities attribute. When configured to false, all extended communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
large boolean
| Synopsis | Advertise the Large Communities attribute to peers | |
| Context | configure service vprn string bgp group string send-communities large boolean | |
| Tree | large | |
Description | When unconfigured, this command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP large communities are sent to peers in the Large Communities attribute. When configured to false, all large communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
standard boolean
| Synopsis | Advertise the Communities attribute to peers | |
| Context | configure service vprn string bgp group string send-communities standard boolean | |
| Tree | standard | |
Description | When unconfigured, this command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP standard communities are sent to peers in the Communities attribute. When configured to false, all standard communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
send-default
| Synopsis | Enable the send-default context | |
| Context | configure service vprn string bgp group string send-default | |
| Tree | send-default | |
| Introduced | 19.7.R1 | |
Platforms | All |
export-policy reference
| Synopsis | Export policy name | |
| Context | configure service vprn string bgp group string send-default export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 19.7.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
split-horizon boolean
| Synopsis | Prevent routes being reflected back to best-route peer | |
| Context | configure service vprn string bgp group string split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split-horizon. This command prevents routes from being reflected back to a peer that sends the best route. It applies to routes of all address families and to any type of sending peer; confed-EBGP, EBGP and IBGP. Enabling the split-horizon functionality may have a detrimental impact on peer and route scaling and should only be used when absolutely necessary. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, the use of split-horizon is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-group boolean
| Synopsis | Use group for static peers | |
| Context | configure service vprn string bgp group string static-group boolean | |
| Tree | static-group | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tcp-mss (number | keyword)
| Synopsis | TCP maximum segment size override | |
| Context | configure service vprn string bgp group string tcp-mss (number | keyword) | |
| Tree | tcp-mss | |
Description | This command configures an override for the TCP maximum segment size to use with a specific peer or set of peers (depending on the scope of the command). The configured value controls two properties of the TCP connection as follows: TCP MSS option - The router advertises the TCP MSS option value in the TCP SYN packet it sends as part of the 3-way handshake. The advertised value may be lower than the configured value, depending on the IP MTU of the first hop IP interface. The peers must abide by this value when sending TCP segments to the local router. TCP maximum segment size - The actual transmitted size may be lower than the configured value, depending on the TCP MSS option value signaled by the peers, the effect of path MTU discovery, or other factors. | |
| Range | 384 to 9746 | |
| Options | ||
| Introduced | 21.2.R1 | |
Platforms | All |
third-party-nexthop boolean
| Synopsis | Apply third-party next-hop processing to EBGP peers | |
| Context | configure service vprn string bgp group string third-party-nexthop boolean | |
| Tree | third-party-nexthop | |
Description | When configured to true, this command enables the router to send third-party next hop to EBGP peers in the same subnet as the source peer. The address family of the transport must match the address family of the route. When an IPv4 or IPv6 route is received from one EBGP peer and advertised to another EBGP peer in the same IP subnet, the BGP next hop is left unchanged. When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, third-party next-hop processing is disabled and the next hop carries the IP address of the interface used to establish the TCP connection to the peer. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ttl-security number
| Synopsis | Minimum TTL value for an incoming BGP packet | |
| Context | configure service vprn string bgp group string ttl-security number | |
| Tree | ttl-security | |
Description | This command configures the minimum TTL value that BGP accepst from an incoming packet. A packet with a TTL value less than the minimum configured TTL value is discarded. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
hold-time
minimum-hold-time number
| Synopsis | Minimum hold time between successive messages | |
| Context | configure service vprn string bgp hold-time minimum-hold-time number | |
| Tree | minimum-hold-time | |
Description | This command specifies the minimum hold time that is accepted for the session. If a peer proposes a hold time lower than this value, the session attempt is rejected. | |
| Range | 0 | 3 to 65535 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Maximum time BGP waits between successive messages | |
| Context | configure service vprn string bgp hold-time seconds number | |
| Tree | seconds | |
Description | This command configures the maximum time BGP waits between successive messages (either keepalive or update) from its peer before closing the connection. Although the implementation allows setting the keepalive timer at the BGP global level times separately, the configured keepalive timer is overridden by this value under the following circumstances.
| |
| Range | 0 | 3 to 65535 | |
| Default | 90 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ibgp-multipath boolean
| Synopsis | Enable IBGP multipath load balancing | |
| Context | configure service vprn string bgp ibgp-multipath boolean | |
| Tree | ibgp-multipath | |
Description | When configured to true, this command enables IBGP multipath load balancing when adding BGP routes to the route table if the route resolving the BGP next hop offers multiple next hops. When configured to false, this command disables IBGP multipath load balancing. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import
policy (policy-expr-string | string)
initial-send-delay-zero boolean
| Synopsis | Send BGP updates as soon as session comes up | |
| Context | configure service vprn string bgp initial-send-delay-zero boolean | |
| Tree | initial-send-delay-zero | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
keepalive number
label-preference number
| Synopsis | Route preference for routes from labeled-unicast peers | |
| Context | configure service vprn string bgp label-preference number | |
| Tree | label-preference | |
| Range | 1 to 255 | |
| Default | 170 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
local-as
as-number number
prepend-global-as boolean
| Synopsis | Prepend global AS when advertising routes to BGP peer | |
| Context | configure service vprn string bgp local-as prepend-global-as boolean | |
| Tree | prepend-global-as | |
Description | When configured to true, the global ASN is added to the AS_PATH attribute in outbound routes sent to the peer. When configured to false, the global ASN is hidden in paths announced to the EBGP peer. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
private boolean
| Synopsis | Hide the local ASN in sent paths learned from peering | |
| Context | configure service vprn string bgp local-as private boolean | |
| Tree | private | |
Description | When configured to true, the local ASN is hidden in paths learned from the peering. When configured to false, the local ASN is advertised to all peers, including those that can use the global ASN for establishing BGP peering sessions. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-preference number
| Synopsis | Default local preference if not in incoming routes | |
| Context | configure service vprn string bgp local-preference number | |
| Tree | local-preference | |
| Max. Range | 0 to 4294967295 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
loop-detect keyword
| Synopsis | Strategy for loop detection in the AS path | |
| Context | configure service vprn string bgp loop-detect keyword | |
| Tree | loop-detect | |
| Options | ||
| Default | ignore-loop | |
| Introduced | 16.0.R1 | |
Platforms |
All |
loop-detect-threshold number
| Synopsis | Threshold for the global ASN in a received AS path | |
| Context | configure service vprn string bgp loop-detect-threshold number | |
| Tree | loop-detect-threshold | |
| Range | 0 to 15 | |
| Default | 0 | |
| Introduced | 16.0.R6 | |
Platforms |
All |
med-out (number | keyword)
min-route-advertisement number
| Synopsis | Minimum time before a prefix can be advertised to peer | |
| Context | configure service vprn string bgp min-route-advertisement number | |
| Tree | min-route-advertisement | |
| Range | 1 to 255 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
monitor
admin-state keyword
| Synopsis | Administrative state of BMP monitoring | |
| Context | configure service vprn string bgp monitor admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
all-stations boolean
| Synopsis | Send BMP messages to all configured stations | |
| Context | configure service vprn string bgp monitor all-stations boolean | |
| Tree | all-stations | |
Description | When configured to true, this command specifies that BMP messages are to be sent to all configured BMP monitoring stations. When configured to false, the command is not used to indicate the stations which can receive BMP messages. The station command (at the same context level) identifies the BMP stations for which BMP messages are to be sent. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-monitoring
| Synopsis | Enter the route-monitoring context | |
| Context | configure service vprn string bgp monitor route-monitoring | |
| Tree | route-monitoring | |
| Introduced | 16.0.R1 | |
Platforms | All |
post-policy boolean
| Synopsis | Allow post-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp monitor route-monitoring post-policy boolean | |
| Tree | post-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pre-policy boolean
| Synopsis | Allow pre-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp monitor route-monitoring pre-policy boolean | |
| Tree | pre-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
station [station-name] reference
[station-name] reference
multihop number
| Synopsis | TTL in IP packet headers for EBGP peers multi-hops away | |
| Context | configure service vprn string bgp multihop number | |
| Tree | multihop | |
Description | This command configures the Time to Live (TTL) value entered in the IP header of packets sent to an EBGP peer multiple hops away. This command applies only to EBGP. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multipath
ebgp number
family [family-type] keyword
| Synopsis | Enter the family list instance | |
| Context | configure service vprn string bgp multipath family keyword | |
| Tree | family | |
Description | Commands in this context set ECMP multipath parameters that apply only to the specified label unicast address family. When multipath is enabled, traffic to the destination is load-shared across a set of paths (BGP routes) that the BGP decision process considers equal to the best path. The distribution of traffic over the multiple paths may or may not be equal. The distribution is based on weights derived from the Link Bandwidth Extended Community. For more information about the criteria a non-best route must meet to qualify as a multipath, see “BGP route installation in the route table” in the 7450 ESS 7750 SR 7950 XRS VSR Unicast Routing Protocols User Guide. | |
| Introduced | 19.5.R1 | |
Platforms | All |
[family-type] keyword
ebgp number
| Synopsis | Maximum multipaths when best path is EBGP learned route | |
| Context | configure service vprn string bgp multipath family keyword ebgp number | |
| Tree | ebgp | |
Description | This command configures the maximum number of multipaths per prefix or NLRI when the best path is an EBGP learned route. The limit configured using this command overrides the limit configured in the max-paths command. If the best path is an EBGP learned route, and this command is set to 1, multipaths are disabled. | |
| Range | 1 to 64 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
ibgp number
| Synopsis | Maximum multipaths when best path is IBGP learned route | |
| Context | configure service vprn string bgp multipath family keyword ibgp number | |
| Tree | ibgp | |
Description | This command configures the maximum number of multipaths per prefix or NLRI when the best path is an IBGP learned route. The limit configured using this command overrides the limit configured in the max-paths command. If the best path is an IBGP learned route and this command is set to 1, multipaths are disabled. | |
| Range | 1 to 64 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
max-paths number
| Synopsis | Maximum number of multipaths per prefix or NLRI | |
| Context | configure service vprn string bgp multipath family keyword max-paths number | |
| Tree | max-paths | |
Description | This command configures the maximum number of multipaths per prefix or NLRI for the IP family option specified using the family command. Consider the following when configuring this command:
| |
| Range | 1 to 64 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
restrict keyword
unequal-cost boolean
| Synopsis | Ignore differences in the next-hop cost for multipath | |
| Context | configure service vprn string bgp multipath family keyword unequal-cost boolean | |
| Tree | unequal-cost | |
Description | When configured to true, BGP ignores differences in the next-hop cost when determining eligible multipaths. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
ibgp number
max-paths number
restrict keyword
unequal-cost boolean
| Synopsis | Ignore differences in the next-hop cost for multipath | |
| Context | configure service vprn string bgp multipath unequal-cost boolean | |
| Tree | unequal-cost | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
neighbor [ip-address] (ipv4-address-with-zone | ipv6-address-with-zone)
[ip-address] (ipv4-address-with-zone | ipv6-address-with-zone)
admin-state keyword
| Synopsis | Administrative state of the BGP neighbor | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-inactive boolean
| Synopsis | Advertise an inactive BGP route to peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) advertise-inactive boolean | |
| Tree | advertise-inactive | |
Description | When configured to true, this command allows an inactive BGP route to be advertised, even though it is not the most preferred route. The effect of the command on advertised unlabeled, labeled, and multicast IPv4 and IPv6 routes depends on several factors.
When unconfigured, the command inherits the value of the global-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, the advertisement of inactive BGP routes to other BGP peers is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-ipv6-next-hops
| Synopsis | Enable the advertise-ipv6-next-hops context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) advertise-ipv6-next-hops | |
| Tree | advertise-ipv6-next-hops | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
aggregator-id-zero boolean
| Synopsis | Set router ID in the BGP AGGREGATOR attribute to zero | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) aggregator-id-zero boolean | |
| Tree | aggregator-id-zero | |
| Introduced | 16.0.R1 | |
Platforms | All |
as-override boolean
| Synopsis | Replace the peer ASN with the local ASN in AS Path | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) as-override boolean | |
| Tree | as-override | |
Description | When configured to true, the advertising router's local AS replaces all occurrences of the peer AS in the AS_PATH attribute. This command should be used with caution, as it breaks BGP's loop detection mechanism. When unconfigured, the command inherits the value of the group-level setting (true or false). This command cannot be explicitly configured to false. When the command inherits a value of false, no AS override is performed. | |
| Introduced | 16.0.R1 | |
Platforms | All |
asn-4-byte boolean
| Synopsis | Advertise the use of 4-byte ASNs | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) asn-4-byte boolean | |
| Tree | asn-4-byte | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | BGP authentication key | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 370 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | TCP authentication keychain for the session | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) authentication-keychain reference | |
| Tree | authentication-keychain | |
Description | This command associates the keychain to be used to authenticate the BGP session. The keychain allows the rollover of authentication keys during the lifetime of a session. | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, BFD is enabled on a given protocol interface where the state of the protocol interface is tied to the state of the BFD session between the local node and the remote node. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, BFD is removed from the associated protocol adjacency. | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-strict-mode
| Synopsis | Enter the bfd-strict-mode context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) bfd-strict-mode | |
| Tree | bfd-strict-mode | |
| Introduced | 23.7.R1 | |
Platforms | All |
advertise
| Synopsis | Enable the advertise context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) bfd-strict-mode advertise | |
| Tree | advertise | |
Description | Commands in this context configure BGP to advertise the Strict-BFD capability to peers that are within scope of this command and meet the following requirements:
When the preceding conditions are satisfied and two peers attempting to form a session both advertise the Strict-BFD capability, the BGP finite state machine in each router transitions the session state to established after the BFD session with the peer enters the up state. When unconfigured, BGP does not advertise the Strict-BFD capability to peers. | |
| Introduced | 23.7.R1 | |
Platforms | All |
holdtime number
| Synopsis | Maximum time BGP waits for the BFD session to come up | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) bfd-strict-mode advertise holdtime number | |
| Tree | holdtime | |
Description | This command configures the maximum time BGP waits for the BFD session to come up, provided that the Strict-BFD procedures apply to a session, and the negotiated BGP hold time is zero (no keepalives). If the negotiated BGP hold time is greater than zero, the advertised hold time is not considered. | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 23.7.R1 | |
Platforms | All |
next-hop-reachability boolean
| Synopsis | Consider next hop unreachable if BFD session is down | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) bfd-strict-mode next-hop-reachability boolean | |
| Tree | next-hop-reachability | |
Description | When configured to true, the router considers next-hop self routes belonging to specific address families received from a peer within scope of this command as having an unresolved next hop, provided that the following requirements are met:
The unresolved state is maintained until the BFD session state changes to up or administratively down, even if there is a resolving route or tunnel that matches the BGP next-hop address. Routes received from one peer with a BGP next-hop address equal to the address of another peer are not affected by the BFD session to the other peer.The behavior of the router when this command is true does not depend on whether Strict-BFD is used, as both features are independent. Configuring this command to true only affects routes belonging to the following address families:
When configured to false, the router does not consider next-hop self routes belonging to the preceding address families as having an unresolved next hop if the BFD session goes down. | |
| Introduced | 23.7.R1 | |
Platforms | All |
capability-negotiation boolean
| Synopsis | Enable capability negotiation | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) capability-negotiation boolean | |
| Tree | capability-negotiation | |
| Introduced | 16.0.R1 | |
Platforms | All |
client-reflect boolean
| Synopsis | Allow cluster RR to advertise routes to its clients | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) client-reflect boolean | |
| Tree | client-reflect | |
| Introduced | 16.0.R1 | |
Platforms | All |
cluster
cluster-id string
| Synopsis | Route reflector cluster ID | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) cluster cluster-id string | |
| Tree | cluster-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
connect-retry number
| Synopsis | BGP connect retry timer value | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) connect-retry number | |
| Tree | connect-retry | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
damp-peer-oscillations
| Synopsis | Enable the damp-peer-oscillations context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations | |
| Tree | damp-peer-oscillations | |
| Introduced | 16.0.R1 | |
Platforms | All |
error-interval number
| Synopsis | Time after a reset that the session must be error-free | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations error-interval number | |
| Tree | error-interval | |
Description | This command sets the interval of time after a reset, during which the session must be error-free in order to reset the penalty counter and return the idle hold time to the initial wait time. | |
| Range | 0 to 2048 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
idle-hold-time
| Synopsis | Enter the idle-hold-time context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations idle-hold-time | |
| Tree | idle-hold-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
initial-wait number
| Synopsis | Time session remains in idle state after stabilization | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations idle-hold-time initial-wait number | |
| Tree | initial-wait | |
| Range | 0 to 2048 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-wait number
| Synopsis | Maximum session idle time after repeated instability | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations idle-hold-time max-wait number | |
| Tree | max-wait | |
| Range | 1 to 2048 | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
second-wait number
| Synopsis | Time that doubles after each repeated session failure | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) damp-peer-oscillations idle-hold-time second-wait number | |
| Tree | second-wait | |
Description | This command defines the hold time that doubles after each repeated session failure that occurs in a short span of time. | |
| Range | 1 to 2048 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
damping boolean
default-label-preference
| Synopsis | Enter the default-label-preference context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) default-label-preference | |
| Tree | default-label-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
default-preference
| Synopsis | Enter the default-preference context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) default-preference | |
| Tree | default-preference | |
| Introduced | 19.5.R1 | |
Platforms | All |
ebgp number
ibgp number
description string
| Synopsis | Text description | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ebgp-default-reject-policy
| Synopsis | Enable the ebgp-default-reject-policy context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) ebgp-default-reject-policy | |
| Tree | ebgp-default-reject-policy | |
| Introduced | 19.5.R1 | |
Platforms | All |
export boolean
import boolean
enforce-first-as boolean
| Synopsis | Enforce the configured peer AS value in received routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) enforce-first-as boolean | |
| Tree | enforce-first-as | |
Description | When configured to true for an EBGP session, all routes received from an EBGP peer are checked to ensure that the most recent ASN in the AS_PATH attribute of each route matches the configured AS of the session. If there is not a match, the session is reset (if the update-fault-tolerance command in the error-handling context is set to false) or the session is left up but the route is treated as withdrawn (if update-fault-tolerance is set to true). This command does not flap an established session because it applies only to routes received after the command is issued. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, received routes are not checked for compliance with the rule. | |
| Introduced | 16.0.R1 | |
Platforms | All |
error-handling
| Synopsis | Enter the error-handling context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) error-handling | |
| Tree | error-handling | |
| Introduced | 16.0.R1 | |
Platforms | All |
update-fault-tolerance boolean
| Synopsis | Tolerate non-critical errors in UPDATE messages | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) error-handling update-fault-tolerance boolean | |
| Tree | update-fault-tolerance | |
Description | When configured to true, non-critical errors are handled with treat-as-withdraw, attribute-discard, and other non-disruptive approaches that do not cause a session reset. Critical errors still trigger a session reset. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, all errors trigger a session reset. | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn-link-bandwidth
| Synopsis | Enter the evpn-link-bandwidth context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) evpn-link-bandwidth | |
| Tree | evpn-link-bandwidth | |
| Introduced | 22.7.R1 | |
Platforms | All |
add-to-received-bgp number
| Synopsis | Weight added to received PE-CE BGP routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) evpn-link-bandwidth add-to-received-bgp number | |
| Tree | add-to-received-bgp | |
Description | This command configures the weight value added to all BGP PE-CE routes for the purpose of weighted ECMP if EVPN-IFL and BGP PE-CE routes are combined into the same ECMP set. For the load-balancing betweeen EVPN-IFL and BGP PE-CE routes the configure service vprn bgp eibgp-loadbalance command must already be configured in the system. | |
| Range | 1 to 128 | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
export
policy (policy-expr-string | string)
| Synopsis | Export policy name | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) export policy (policy-expr-string | string) | |
| Tree | policy | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended-nh-encoding
| Synopsis | Enable the extended-nh-encoding context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) extended-nh-encoding | |
| Tree | extended-nh-encoding | |
| Introduced | 19.5.R1 | |
Platforms | All |
ipv4 boolean
family
flow-ipv4 boolean
flow-ipv6 boolean
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Advertise support for the label-IPv4 address family | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) family label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv4 boolean
| Synopsis | Advertise support for the MCAST-IPv4 address family | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) family mcast-ipv4 boolean | |
| Tree | mcast-ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcast-ipv6 boolean
| Synopsis | Advertise support for the MCAST-IPv6 address family | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) family mcast-ipv6 boolean | |
| Tree | mcast-ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fast-external-failover boolean
| Synopsis | Drop external BGP session immediately when link fails | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) fast-external-failover boolean | |
| Tree | fast-external-failover | |
Description | When this command inherits a value of true, the router drops an external BGP session on a single-hop route immediately when the local interface goes down. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to true. When configured to false, the BGP session remains up until the hold time expires. | |
| Introduced | 16.0.R1 | |
Platforms | All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
gr-notification boolean
| Synopsis | Perform graceful restart procedures after NOTIFICATION | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart gr-notification boolean | |
| Tree | gr-notification | |
Description | When configured to true, the Graceful Restart capability sent by the router indicates support for NOTIFICATION messages. If the peer also supports this capability, the session is restarted gracefully (while preserving forwarding) if either peer sends a NOTIFICATION message due to some type of event or error. When configured to false, NOTIFICATION messages are not supported. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
long-lived
| Synopsis | Enable the long-lived context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived | |
| Tree | long-lived | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-stale-to-all-neighbors boolean
| Synopsis | Advertise stale routes to all BGP peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived advertise-stale-to-all-neighbors boolean | |
| Tree | advertise-stale-to-all-neighbors | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertised-stale-time number
| Synopsis | Advertised long-lived stale time for LLGR routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived advertised-stale-time number | |
| Tree | advertised-stale-time | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
family [family-type] keyword
| Synopsis | Enter the family list instance | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived family keyword | |
| Tree | family | |
| Introduced | 16.0.R1 | |
Platforms | All |
[family-type] keyword
| Synopsis | Address family type for LLGR | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived family keyword | |
| Tree | family | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertised-stale-time number
| Synopsis | LLGR stale routes time for family override | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived family keyword advertised-stale-time number | |
| Tree | advertised-stale-time | |
Description | This command configures the long-lived stale routes time that is advertised by the router in its LLGR capability. This command applies to all AFI/SAFI in the advertised LLGR capability with a family-specific override. | |
| Range | 0 to 16777215 | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived family keyword helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
Description | This command configures a locally-imposed LLGR stale time that overrides the long-lived stale routes time that is advertised by the router in its LLGR capability. This is a family-specific override value. | |
| Range | 0 to 16777216 | |
| Default | 16777216 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
forwarding-bits-set keyword
| Synopsis | BGP LLGR forwarding-bit behavior for address family | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived forwarding-bits-set keyword | |
| Tree | forwarding-bits-set | |
Description | This command determines the setting of the F bit in the GR and LLGR capabilities advertised by the router. When the F bit is set for an address family, it indicates that the advertising router is able to preserve forwarding state for the routes of that address family across the last restart. When the session is re-established after a restart and the F bit is not set, all stale routes from the peer are immediately removed for the corresponding address family. This command allows the F bit to be set for all address families or only for non-forwarding address families (L2-VPN, route target, flow-IPv4, and flow-IPv6). | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-restart-time number
| Synopsis | Locally-configured override for restart time | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived helper-override-restart-time number | |
| Tree | helper-override-restart-time | |
Description | This command overrides the restart time advertised by a peer (in its GR capability) with a locally-configured value. This override applies only to AFI/SAFI that were included in the GR capability of the peer. The restart-time is always zero for AFI/SAFI not included in the GR capability. This command is useful if the local router wants to force the LLGR phase to begin after a set time for all protected AFI/SAFI. | |
| Range | 0 to 4095 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
helper-override-stale-time number
| Synopsis | Locally-configured stale routes override time | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived helper-override-stale-time number | |
| Tree | helper-override-stale-time | |
Description | This command configures a locally-imposed LLGR stale time that overrides the long-lived stale routes time that is advertised by the router in its LLGR capability. This command applies to all AFI/SAFI in the advertised LLGR capability except for any AFI/SAFI with a family-specific override. | |
| Range | 0 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
without-no-export boolean
| Synopsis | Advertise LLGR stale routes to non-LLGR peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart long-lived without-no-export boolean | |
| Tree | without-no-export | |
Description | When configured to true, LLGR stale routes can be advertised to any peer (EBGP or IBGP) that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0. When configured to false, LLGR stale routes are not advertised to any EBGP peer that did not signal the LLGR capability. For IBGP and confederation-EBGP peers that did not advertise the LLGR capability, the local preference attribute in the advertised stale routes is automatically set to 0 and a NO_EXPORT standard community is automatically added to the routes. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
restart-time number
| Synopsis | Restart time advertised by GR capability | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart restart-time number | |
| Tree | restart-time | |
| Range | 0 to 4095 | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-routes-time number
| Synopsis | Maximum time to maintain routes after graceful restart | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) graceful-restart stale-routes-time number | |
| Tree | stale-routes-time | |
| Range | 1 to 3600 | |
| Default | 360 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Neighbor to group | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) group reference | |
| Tree | group | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
hold-time
minimum-hold-time number
| Synopsis | Minimum time BGP waits between successive messages | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) hold-time minimum-hold-time number | |
| Tree | minimum-hold-time | |
| Range | 0 | 3 to 65536 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Maximum hold time between successive messages | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) hold-time seconds number | |
| Tree | seconds | |
Description | The BGP hold time specifies the maximum time BGP waits between successive messages (either keepalive or update) from its peer, before closing the connection. Even though the implementation allows setting the keepalive timer at the BGP neighbor level times separately, the configured keepalive timer is overridden by this value under the following circumstances:
When unconfigured, the command setting is inherited from the BGP group-level configuration. | |
| Range | 0 | 3 to 65535 | |
| Introduced | 16.0.R1 | |
Platforms | All |
import
policy (policy-expr-string | string)
| Synopsis | Route policy name | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) import policy (policy-expr-string | string) | |
| Tree | policy | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
initial-send-delay-zero boolean
| Synopsis | Send BGP updates as soon as the session comes up | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) initial-send-delay-zero boolean | |
| Tree | initial-send-delay-zero | |
Description | When configured to true, BGP updates are sent as soon as the session comes up. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, BGP waits to send UPDATE messages for the minimum route advertisement time after a session is established. | |
| Introduced | 16.0.R1 | |
Platforms | All |
keepalive number
label-preference number
| Synopsis | Route preference for routes from labeled-unicast peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) label-preference number | |
| Tree | label-preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-bandwidth
| Synopsis | Enter the link-bandwidth context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth | |
| Tree | link-bandwidth | |
| Introduced | 16.0.R3 | |
Platforms | All |
accept-from-ebgp
| Synopsis | Enable the accept-from-ebgp context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth accept-from-ebgp | |
| Tree | accept-from-ebgp | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth accept-from-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth accept-from-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth accept-from-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
add-to-received-ebgp
| Synopsis | Enable the add-to-received-ebgp context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth add-to-received-ebgp | |
| Tree | add-to-received-ebgp | |
| Introduced | 16.0.R3 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth add-to-received-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth add-to-received-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth add-to-received-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R3 | |
|
Platforms | All |
aggregate-used-paths
| Synopsis | Enable the aggregate-used-paths context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth aggregate-used-paths | |
| Tree | aggregate-used-paths | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth aggregate-used-paths ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth aggregate-used-paths ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth aggregate-used-paths label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
send-to-ebgp
| Synopsis | Enable the send-to-ebgp context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth send-to-ebgp | |
| Tree | send-to-ebgp | |
| Introduced | 16.0.R4 | |
Platforms | All |
ipv4 boolean
| Synopsis | Support Link Bandwidth EC in IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth send-to-ebgp ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Support Link Bandwidth EC in IPv6 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth send-to-ebgp ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
label-ipv4 boolean
| Synopsis | Support Link Bandwidth EC in label-IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) link-bandwidth send-to-ebgp label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name)
| Synopsis | Local IP address used when communicating with BGP peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) local-address (ipv4-address-no-zone | ipv6-address-no-zone | interface-name) | |
| Tree | local-address | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-as
as-number number
prepend-global-as boolean
| Synopsis | Prepend global ASN when advertising routes to BGP peer | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) local-as prepend-global-as boolean | |
| Tree | prepend-global-as | |
Description | When configured to true, the global ASN is added to the AS_PATH attribute in outbound routes sent to the peer. When configured to false, the global ASN is not included in the AS_PATH attribute. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
private boolean
| Synopsis | Hide the local ASN in sent paths learned from peering | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) local-as private boolean | |
| Tree | private | |
Description | When configured to true, the local AS number is only advertised to peers that use the local ASN for establishing BGP peering sessions. When configured to false, the local ASN is advertised to all peers, including those that can use the global ASN for establishing BGP peering sessions. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-preference number
| Synopsis | Default local preference if not in incoming routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) local-preference number | |
| Tree | local-preference | |
| Range | 0 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
loop-detect keyword
| Synopsis | Strategy for loop detection in the AS path | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) loop-detect keyword | |
| Tree | loop-detect | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
loop-detect-threshold number
| Synopsis | Threshold for the global ASN in a received AS path | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) loop-detect-threshold number | |
| Tree | loop-detect-threshold | |
| Range | 0 to 15 | |
| Introduced | 16.0.R6 | |
|
Platforms | All |
med-out (number | keyword)
min-route-advertisement number
| Synopsis | Minimum interval between successive prefix updates | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) min-route-advertisement number | |
| Tree | min-route-advertisement | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
monitor
admin-state keyword
| Synopsis | Administrative state of BMP monitoring | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) monitor admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
all-stations boolean
| Synopsis | Send BMP messages to all configured stations | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) monitor all-stations boolean | |
| Tree | all-stations | |
Description | When configured to true, this command specifies that BMP messages are to be sent to all configured BMP monitoring stations. When configured to false, the command is not used to indicate the stations which can receive BMP messages. The station command (at the same context level) identifies the BMP stations for which BMP messages are to be sent. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-monitoring
| Synopsis | Enter the route-monitoring context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) monitor route-monitoring | |
| Tree | route-monitoring | |
| Introduced | 16.0.R1 | |
Platforms | All |
post-policy boolean
| Synopsis | Allow post-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) monitor route-monitoring post-policy boolean | |
| Tree | post-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pre-policy boolean
| Synopsis | Allow pre-policy route-monitoring messages to be sent | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) monitor route-monitoring pre-policy boolean | |
| Tree | pre-policy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
station [station-name] reference
[station-name] reference
multihop number
multipath-eligible boolean
| Synopsis | Allow routes from this peer in multipath eligibility | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) multipath-eligible boolean | |
| Tree | multipath-eligible | |
| Introduced | 19.5.R1 | |
Platforms | All |
next-hop-self boolean
| Synopsis | Advertise routes with local address as next-hop address | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) next-hop-self boolean | |
| Tree | next-hop-self | |
Description | When configured to true, this command configures BGP to advertise routes to members of a group using a local address of the BGP instance as the BGP next-hop address. Note that this command is set without exception, regardless of the route source (EBGP or IBGP) or its family. When used with VPN-IPv4 and VPN-IPv6 routes, the configure router bgp rr-vpn-forwarding command should also be configured. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, protocol standard behavior is applied to determine whether to set next-hop-self in advertised routes. | |
| Introduced | 16.0.R1 | |
Platforms | All |
origin-validation
| Synopsis | Enable the origin-validation context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) origin-validation | |
| Tree | origin-validation | |
| Introduced | 19.7.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
label-ipv4 boolean
| Synopsis | Enable support for labeled-unicast IPv4 routes | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) origin-validation label-ipv4 boolean | |
| Tree | label-ipv4 | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
passive boolean
path-mtu-discovery boolean
| Synopsis | Enable path MTU discovery | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) path-mtu-discovery boolean | |
| Tree | path-mtu-discovery | |
Description | When configured to true, Path MTU Discovery (PMTUD) is enabled for the associated TCP connections. When set to true, PMTUD is activated toward an IPv4 BGP neighbor and the Don’t Fragment (DF) bit is set in the IP header of all IPv4 packets sent to the peer. If any device along the path toward the peer cannot forward the packet because the IP MTU of the interface is smaller than the IP packet size, this device drops the packet and sends an ICMP or ICMPv6 error message encoding the interface MTU. When the router receives the ICMP or ICMPv6 message, it lowers the TCP maximum segment size limit from the previous value so that the IP MTU constraint can be accommodated. When PMTUD is configured to false and there is no TCP MSS configuration that can be associated with a BGP neighbor (in either the BGP configuration or the first hop IP interface configuration), the router advertises a value of only 1024 bytes as the TCP MSS option value, limiting received TCP segments to that size. | |
| Introduced | 16.0.R1 | |
Platforms | All |
peer-as number
| Synopsis | Peer AS number | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) peer-as number | |
| Tree | peer-as | |
Description | This command configures the autonomous system number for the peer. The peer AS number must be configured for each configured peer. For EBGP peers, the peer AS number configured must be different from the autonomous system number configured for this router under the global level since the peer will be in a different autonomous system than this router. For IBGP peers, the peer AS number must be the same as the autonomous system number of this router configured under the global level. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
peer-creation-type keyword
| Synopsis | Peer creation type | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) peer-creation-type keyword | |
| Tree | peer-creation-type | |
| Options | ||
| Default | static | |
| Introduced | 16.0.R1 | |
Platforms |
All |
peer-ip-tracking boolean
| Synopsis | Enable BGP peer tracking | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) peer-ip-tracking boolean | |
| Tree | peer-ip-tracking | |
Description | When configured to true, this command enables BGP peer tracking. Peer tracking should be used with caution. Peer tracking can tear a session down even if the loss of connectivity turns out to be short-lived (for example, while the IGP protocol is re-converging). Next-hop tracking, which is always enabled, handles temporary connectivity issues more effectively. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, peer tracking is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
preference number
| Synopsis | Route preference for routes learned from all peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) preference number | |
| Tree | preference | |
Description | This command configures the route preference for routes learned from the configured peers. The lower the preference value, the higher the chance of the route being the active route. The router assigns BGP routes the highest default preference as compared to routes that are direct, static or learned via MPLS or OSPF. When unconfigured, the command setting is inherited from the group-level configuration. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-limit [family] keyword
| Synopsis | Enter the prefix-limit list instance | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword | |
| Tree | prefix-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
[family] keyword
| Synopsis | Address family to which the limit applies | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword | |
| Tree | prefix-limit | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-excess number
| Synopsis | Percentage of maximum routes to install in route table | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword hold-excess number | |
| Tree | hold-excess | |
Description | This command specifies the percentage of maximum routes that are allowed to be installed in the route table for the configured address family. If a peer within scope of the configuration exceeds the limit, the overflow routes are held in the BGP RIB as inactive routes and are ineligible for forwarding and advertisement to other peers. If the post-import command is configured to true, only routes not rejected by import policies count toward the limit. A BGP route in an overflow state is reconsidered for activation and reinstallation when an UPDATE message is received for the route. This command is mutually exclusive with the idle-timeout and log-only commands. | |
| Range | 1 to 100 | |
| Introduced | 23.7.R1 | |
|
Platforms | All |
idle-timeout number
| Synopsis | Time which BGP peering remains idle before reconnecting | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword idle-timeout number | |
| Tree | idle-timeout | |
Description | This command defines the idle time after an administrative take-down before BGP re-establishes a session and reconnects to a peer. When unconfigured, the command inherits the value from the group-level configuration. | |
| Range | 1 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
log-only boolean
maximum number
| Synopsis | Maximum number of routes to be learned from a peer | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword maximum number | |
| Tree | maximum | |
Description | This command configures the maximum number of BGP routes than can be received from a peer before administrative action is taken. | |
| Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R2 | |
Platforms | All |
post-import boolean
| Synopsis | Apply limit only to routes accepted by import policies | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) prefix-limit keyword post-import boolean | |
| Tree | post-import | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
remove-private
| Synopsis | Enable the remove-private context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) remove-private | |
| Tree | remove-private | |
| Introduced | 16.0.R1 | |
Platforms | All |
limited boolean
replace boolean
skip-peer-as boolean
| Synopsis | Keep private ASN if it is the same as the BGP peer ASN | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) remove-private skip-peer-as boolean | |
| Tree | skip-peer-as | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
send-communities
| Synopsis | Enter the send-communities context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-communities | |
| Tree | send-communities | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended boolean
| Synopsis | Advertise the Extended Communities attribute to peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-communities extended boolean | |
| Tree | extended | |
Description | When unconfigured, this command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP extended communities are sent to peers in the Extended Communities attribute. When configured to false, all extended communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
large boolean
| Synopsis | Advertise the Large Communities attribute to peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-communities large boolean | |
| Tree | large | |
Description | When unconfigured, this command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP large communities are sent to peers in the Large Communities attribute. When configured to false, all large communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
standard boolean
| Synopsis | Advertise the Communities attribute to peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-communities standard boolean | |
| Tree | standard | |
Description | When unconfigured, this command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to true. When this command inherits a value of true, BGP standard communities are sent to peers in the Communities attribute. When configured to false, all standard communities are removed from all routes advertised to BGP peers. | |
| Introduced | 16.0.R1 | |
Platforms | All |
send-default
| Synopsis | Enable the send-default context | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-default | |
| Tree | send-default | |
| Introduced | 19.7.R1 | |
Platforms | All |
export-policy reference
| Synopsis | Export policy name | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) send-default export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 19.7.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
split-horizon boolean
| Synopsis | Prevent routes being reflected back to best-route peer | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split-horizon. This command prevents routes from being reflected back to a peer that sends the best route. It applies to routes of all address families and to any type of sending peer; confed-EBGP, EBGP and IBGP. Enabling the split-horizon functionality may have a detrimental impact on peer and route scaling and should only be used when absolutely necessary. When unconfigured, the command inherits the value of the group-level setting (true or false). The command cannot be explicitly configured to false. When this command inherits a value of false, the use of split-horizon is disabled. | |
| Introduced | 16.0.R1 | |
Platforms | All |
tcp-mss (number | keyword)
| Synopsis | TCP maximum segment size override | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) tcp-mss (number | keyword) | |
| Tree | tcp-mss | |
Description | This command configures an override for the TCP maximum segment size to use with a specific peer or set of peers (depending on the scope of the command). The configured value controls two properties of the TCP connection as follows: TCP MSS option - The router advertises the TCP MSS option value in the TCP SYN packet it sends as part of the 3-way handshake. The advertised value may be lower than the configured value, depending on the IP MTU of the first hop IP interface. The peers must abide by this value when sending TCP segments to the local router. TCP maximum segment size - The actual transmitted size may be lower than the configured value, depending on the TCP MSS option value signaled by the peers, the effect of path MTU discovery, or other factors. | |
| Range | 384 to 9746 | |
| Options | ||
| Introduced | 21.2.R1 | |
Platforms | All |
third-party-nexthop boolean
| Synopsis | Apply third-party next-hop processing to EBGP peers | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) third-party-nexthop boolean | |
| Tree | third-party-nexthop | |
| Introduced | 16.0.R1 | |
Platforms | All |
ttl-security number
| Synopsis | Minimum TTL value for an incoming BGP packet | |
| Context | configure service vprn string bgp neighbor (ipv4-address-with-zone | ipv6-address-with-zone) ttl-security number | |
| Tree | ttl-security | |
Description | This command configures the minimum TTL value that BGP will accept from an incoming packet. A packet with a TTL value less than the minimum configured TTL value is discarded. When unconfigured, the command inherits the value of the group-level setting. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
next-hop-resolution
| Synopsis | Enter the next-hop-resolution context | |
| Context | configure service vprn string bgp next-hop-resolution | |
| Tree | next-hop-resolution | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy reference
| Synopsis | Policy that filters routes for BGP next-hop resolution | |
| Context | configure service vprn string bgp next-hop-resolution policy reference | |
| Tree | policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-bgp-routes boolean
| Synopsis | Use BGP routes to resolve BGP next hops | |
| Context | configure service vprn string bgp next-hop-resolution use-bgp-routes boolean | |
| Tree | use-bgp-routes | |
Description | When configured to true, BGP routes resolve BGP next hops. When this command is enabled, any unlabeled IPv4 or IPv6 BGP route received from a VPRN BGP peer becomes resolvable by up to four other BGP routes in order to resolve the route to a VPRN IP interface. A VPRN BGP route is not resolvable by another VPRN BGP route or by a BGP-VPN route. This command also allows unlabeled IPv4 or IPv6 BGP routes leaked from the GRT with unresolved next hops (in the GRT) to be resolvable by BGP-VPN routes (of the VPRN). When configured to false, BGP next hops are not resolved. | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
use-leaked-routes
| Synopsis | Enter the use-leaked-routes context | |
| Context | configure service vprn string bgp next-hop-resolution use-leaked-routes | |
| Tree | use-leaked-routes | |
| Introduced | 23.7.R1 | |
Platforms | All |
static boolean
| Synopsis | Use leaked static routes to resolve BGP next hop | |
| Context | configure service vprn string bgp next-hop-resolution use-leaked-routes static boolean | |
| Tree | static | |
Description | When configured to true, the router allows any non-leaked unlabeled unicast IPv4 or IPv6 route in the BGP RIB to be resolved by a leaked static route with direct next hops. A BGP route resolved this way cannot resolve other routes (including BGP routes) and cannot be redistributed into non-BGP protocols, such as IGP. When configured to false, the router prevents the use of leaked static routes to resolve BGP routes. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | All |
path-mtu-discovery boolean
| Synopsis | Enable Path MTU Discovery | |
| Context | configure service vprn string bgp path-mtu-discovery boolean | |
| Tree | path-mtu-discovery | |
Description | When configured to true, Path MTU Discovery (PMTUD) is activated toward an IPv4 BGP neighbor. The Don't Fragment (DF) bit is set in the IP header of all IPv4 packets sent to the peer. If any device along the path toward the peer cannot forward the packet because the IP MTU of the interface is smaller than the IP packet size, the device drops the packet and sends an ICMP or ICMPv6 error message encoding the interface MTU. When the router receives the ICMP or ICMPv6 message, it lowers the TCP maximum segment size limit from the previous value to accomodate the IP MTU constraint. When configured to false, PMTUD is disabled and there is no TCP MSS configuration to associate with a BGP neighbor (in either the BGP configuration or the first-hop IP interface configuration). The router advertises a TCP MSS option of only 1024 bytes, limiting the received TCP segments to that size. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
peer-ip-tracking boolean
| Synopsis | Enable BGP peer tracking | |
| Context | configure service vprn string bgp peer-ip-tracking boolean | |
| Tree | peer-ip-tracking | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
peer-tracking-policy reference
| Synopsis | Policy for BGP peer tracking on router instance | |
| Context | configure service vprn string bgp peer-tracking-policy reference | |
| Tree | peer-tracking-policy | |
Description | This command specifies the name of a policy statement to use with the BGP peer-tracking function on BGP sessions where peer tracking is enabled. When unconfigured, the default peer-tracking policy allows any type of route to match the neighbor IP address except aggregate routes and LDP shortcut routes. Peer tracking should be used with caution. The peer-tracking policy should only permit one of direct-interface or direct routes to be advertised to a BGP peer. Advertising both routes causes the best route to oscillate. | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
preference number
| Synopsis | Route preference for routes learned from all peers | |
| Context | configure service vprn string bgp preference number | |
| Tree | preference | |
Description | This command configures the route preference for routes learned from the configured peers. The lower the preference value, the higher the chance of the route being the active route. The router assigns BGP routes the highest default preference as compared to routes that are direct, static or learned via MPLS or OSPF. | |
| Range | 1 to 255 | |
| Default | 170 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
rapid-withdrawal boolean
| Synopsis | Send BGP withdrawal UPDATE messages immediately | |
| Context | configure service vprn string bgp rapid-withdrawal boolean | |
| Tree | rapid-withdrawal | |
Description | When configured to true, UPDATE messages containing withdrawn NLRI are sent immediately to a peer without waiting for the MRAI timer to expire. UPDATE messages containing reachable NLRI continue to wait for the MRAI timer to expire, or for a rapid update trigger. When configured to false, withdrawal processing continues with the normal behavior. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
remove-private
| Synopsis | Enable the remove-private context | |
| Context | configure service vprn string bgp remove-private | |
| Tree | remove-private | |
| Introduced | 16.0.R1 | |
Platforms | All |
limited boolean
replace boolean
skip-peer-as boolean
| Synopsis | Keep private ASN if AS-PATH contains eBGP peer's ASN | |
| Context | configure service vprn string bgp remove-private skip-peer-as boolean | |
| Tree | skip-peer-as | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rib-management
| Synopsis | Enter the rib-management context | |
| Context | configure service vprn string bgp rib-management | |
| Tree | rib-management | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4
leak-import
| Synopsis | Enter the leak-import context | |
| Context | configure service vprn string bgp rib-management ipv4 leak-import | |
| Tree | leak-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Leak import policy name | |
| Context | configure service vprn string bgp rib-management ipv4 leak-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies one or more leak import policies. Policy names are limited to 64 characters except for the first policy. Only one object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-table-import
| Synopsis | Enter the route-table-import context | |
| Context | configure service vprn string bgp rib-management ipv4 route-table-import | |
| Tree | route-table-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy-name reference
| Synopsis | Name of policy that controls route importation into RIB | |
| Context | configure service vprn string bgp rib-management ipv4 route-table-import policy-name reference | |
| Tree | policy-name | |
Description | This command specifies the name of a policy that controls the importation of active routes from the IP route table into one of the BGP RIBs. When this command is configured, routes dropped or rejected by the policy are not installed in the associated RIB. Rejected routes cannot be advertised to BGP peers associated with the RIB, but they can still be used to resolve BGP next hops of routes in that RIB. If the active route for a prefix is rejected by the policy, the best BGP route for that prefix in the BGP RIB can be advertised to peers as though it is used. Aggregate routes are always imported into each RIB, independent of the specified policy. Route modifications specified in the actions of the policy are ignored and have no effect on the imported routes. When unconfigured, or if the command refers to an empty policy, all non-BGP routes from the IP route table are imported into the applicable RIB. | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6
leak-import
| Synopsis | Enter the leak-import context | |
| Context | configure service vprn string bgp rib-management ipv6 leak-import | |
| Tree | leak-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Leak import policy name | |
| Context | configure service vprn string bgp rib-management ipv6 leak-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies one or more leak import policies. Policy names are limited to 64 characters except for the first policy. Only one object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-table-import
| Synopsis | Enter the route-table-import context | |
| Context | configure service vprn string bgp rib-management ipv6 route-table-import | |
| Tree | route-table-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy-name reference
| Synopsis | Name of policy that controls route importation into RIB | |
| Context | configure service vprn string bgp rib-management ipv6 route-table-import policy-name reference | |
| Tree | policy-name | |
Description | This command specifies the name of a policy that controls the importation of active routes from the IP route table into one of the BGP RIBs. When this command is configured, routes dropped or rejected by the policy are not installed in the associated RIB. Rejected routes cannot be advertised to BGP peers associated with the RIB, but they can still be used to resolve BGP next hops of routes in that RIB. If the active route for a prefix is rejected by the policy, the best BGP route for that prefix in the BGP RIB can be advertised to peers as though it is used. Aggregate routes are always imported into each RIB, independent of the specified policy. Route modifications specified in the actions of the policy are ignored and have no effect on the imported routes. When unconfigured, or if the command refers to an empty policy, all non-BGP routes from the IP route table are imported into the applicable RIB. | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
label-ipv4
| Synopsis | Enter the label-ipv4 context | |
| Context | configure service vprn string bgp rib-management label-ipv4 | |
| Tree | label-ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | All |
leak-import
| Synopsis | Enter the leak-import context | |
| Context | configure service vprn string bgp rib-management label-ipv4 leak-import | |
| Tree | leak-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Leak import policy name | |
| Context | configure service vprn string bgp rib-management label-ipv4 leak-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies one or more leak import policies. Policy names are limited to 64 characters except for the first policy. Only one object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-table-import
| Synopsis | Enter the route-table-import context | |
| Context | configure service vprn string bgp rib-management label-ipv4 route-table-import | |
| Tree | route-table-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy-name reference
| Synopsis | Name of policy that controls route importation into RIB | |
| Context | configure service vprn string bgp rib-management label-ipv4 route-table-import policy-name reference | |
| Tree | policy-name | |
Description | This command specifies the name of a policy that controls the importation of active routes from the IP route table into one of the BGP RIBs. When this command is configured, routes dropped or rejected by the policy are not installed in the associated RIB. Rejected routes cannot be advertised to BGP peers associated with the RIB, but they can still be used to resolve BGP next hops of routes in that RIB. If the active route for a prefix is rejected by the policy, the best BGP route for that prefix in the BGP RIB can be advertised to peers as though it is used. Aggregate routes are always imported into each RIB, independent of the specified policy. Route modifications specified in the actions of the policy are ignored and have no effect on the imported routes. When unconfigured, or if the command refers to an empty policy, all non-BGP routes from the IP route table are imported into the applicable RIB. | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
label-ipv6
| Synopsis | Enter the label-ipv6 context | |
| Context | configure service vprn string bgp rib-management label-ipv6 | |
| Tree | label-ipv6 | |
| Introduced | 22.2.R1 | |
Platforms | All |
leak-import
| Synopsis | Enter the leak-import context | |
| Context | configure service vprn string bgp rib-management label-ipv6 leak-import | |
| Tree | leak-import | |
| Introduced | 22.2.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Leak import policy name | |
| Context | configure service vprn string bgp rib-management label-ipv6 leak-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies one or more leak import policies. Policy names are limited to 64 characters except for the first policy. Only one object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
Notes | This element is ordered by the user. | |
| Introduced | 22.2.R1 | |
Platforms | All |
router-id string
| Synopsis | Router ID for the BGP instance in the AS | |
| Context | configure service vprn string bgp router-id string | |
| Tree | router-id | |
Description | This command specifies the router ID to be used with the BGP instance. Changing the BGP router ID on an active BGP instance causes the BGP instance to restart with the new router ID. When an SR OS is configured with an IPv6-only BOF and no IPv4 system interface address, explicitly-defined IPv4 router IDs are required for BGP as there is no mechanism to derive the router ID from an IPv6 system interface address. | |
| Introduced | 16.0.R1 | |
Platforms | All |
send-communities
| Synopsis | Enter the send-communities context | |
| Context | configure service vprn string bgp send-communities | |
| Tree | send-communities | |
| Introduced | 16.0.R1 | |
Platforms | All |
extended boolean
large boolean
standard boolean
send-default
| Synopsis | Enter the send-default context | |
| Context | configure service vprn string bgp send-default | |
| Tree | send-default | |
| Introduced | 19.7.R1 | |
Platforms | All |
export-policy reference
| Synopsis | Export policy name | |
| Context | configure service vprn string bgp send-default export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 19.7.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
split-horizon boolean
| Synopsis | Prevent routes being reflected back to best-route peer | |
| Context | configure service vprn string bgp split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split-horizon. This command prevents routes from being reflected back to a peer that sends the best route. It applies to routes of all address families and to any type of sending peer; confed-EBGP, EBGP and IBGP. Enabling the split-horizon functionality may have a detrimental impact on peer and route scaling and should only be used when absolutely necessary. When configured to false, the use of split-horizon is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tcp-mss number
| Synopsis | TCP maximum segment size override | |
| Context | configure service vprn string bgp tcp-mss number | |
| Tree | tcp-mss | |
Description | This command configures an override for the TCP maximum segment size to use with a specific peer or set of peers (depending on the scope of the command). The configured value controls two properties of the TCP connection as follows: TCP MSS option - The router advertises the TCP MSS option value in the TCP SYN packet it sends as part of the 3-way handshake. The advertised value may be lower than the configured value, depending on the IP MTU of the first hop IP interface. The peers must abide by this value when sending TCP segments to the local router. TCP maximum segment size - The actual transmitted size may be lower than the configured value, depending on the TCP MSS option value signaled by the peers, the effect of path MTU discovery, or other factors. | |
| Range | 384 to 9746 | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
third-party-nexthop boolean
| Synopsis | Apply third-party next-hop processing to EBGP peers | |
| Context | configure service vprn string bgp third-party-nexthop boolean | |
| Tree | third-party-nexthop | |
Description | When configured to true, this command enables the router to send third-party next hop to EBGP peers in the same subnet as the source peer. The address family of the transport must match the address family of the route. When an IPv4 or IPv6 route is received from one EBGP peer and advertised to another EBGP peer in the same IP subnet, the BGP next hop is left unchanged. When configured to false, third-party next-hop processing is disabled and the next hop carries the IP address of the interface used to establish the TCP connection to the peer. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bgp-evpn
mpls [bgp-instance] number
[bgp-instance] number
admin-state keyword
| Synopsis | Administrative state of BGP-EVPN MPLS | |
| Context | configure service vprn string bgp-evpn mpls number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | All |
auto-bind-tunnel
| Synopsis | Enter the auto-bind-tunnel context | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel | |
| Tree | auto-bind-tunnel | |
Description | Commands in this context configure the automatic binding parameters of a BGP-EVPN service using tunnels to MP-BGP peers. | |
| Introduced | 20.10.R1 | |
Platforms | All |
allow-flex-algo-fallback boolean
| Synopsis | Enable flexible algorithm fallback | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel allow-flex-algo-fallback boolean | |
| Tree | allow-flex-algo-fallback | |
Description | When configured to true, a BGP router with a Flex-Algorithm action configured (via the configure policy-options policy-statement entry action flex-algo command) can resolve to a tunnel with algorithm 0 if no target Flex-Algorithm tunnel is available. When configured to false, the BGP router can resolve only to the intended Flex-Algorithm tunnel, which may cause traffic loss if no corresponding Flex-Algorithm tunnel is available. | |
| Default | false | |
| Introduced | 20.10.R3 | |
|
Platforms | All |
ecmp number
enforce-strict-tunnel-tagging boolean
| Synopsis | Allow enforcement of strict tunnel tagging | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel enforce-strict-tunnel-tagging boolean | |
| Tree | enforce-strict-tunnel-tagging | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
resolution keyword
| Synopsis | Resolution method for tunnel selection | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | none | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
resolution-filter
| Synopsis | Enter the resolution-filter context | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter | |
| Tree | resolution-filter | |
Description | Commands in this context configure the subset of tunnel types that can be used in the resolution of BGP-EVPN routes within the automatic binding of the BGP-EVPN MPLS service to tunnels to MP-BGP peers. | |
| Introduced | 20.10.R1 | |
Platforms | All |
bgp boolean
| Synopsis | Use BGP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter bgp boolean | |
| Tree | bgp | |
Description | When configured to true, BGP searches the BGP LSP for the address of the BGP next hop. When configured to false, BGP tunneling is not used and inter-area or inter-as prefixes are not resolved. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
ldp boolean
| Synopsis | Use LDP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter ldp boolean | |
| Tree | ldp | |
Description | When configured to true, BGP searches for an LDP LSP with a FEC prefix corresponding to the address of the BGP next hop. When configured to false, LDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
mpls-fwd-policy boolean
| Synopsis | Use MPLS forwarding policy for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter mpls-fwd-policy boolean | |
| Tree | mpls-fwd-policy | |
Description | When configured to true, BGP uses the MPLS forwarding policy to determine the address of the BGP next hop. When configured to false, the MPLS forwarding policy is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
rib-api boolean
| Synopsis | Use RIB API gRPC service for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter rib-api boolean | |
| Tree | rib-api | |
Description | When configured to true, BGP uses tunnels programmed using the RIB API gRPC service to resolve the next hops of routes imported into the EVPN service. When configured to false, the RIB API service tunnels are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
rsvp boolean
| Synopsis | Use RSVP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter rsvp boolean | |
| Tree | rsvp | |
Description | When configured to true, BGP searches the best metric RSVP LSP to determine the address of the BGP next hop. This address can correspond to the system interface or to another loopback interface used by the BGP instance on the remote node. The LSP metric is provided by MPLS in the tunnel table. In the case of multiple RSVP LSPs with the same lowest metric, BGP selects the LSP with the lowest tunnel ID. When configured to false, the RSVP LSP is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sr-isis boolean
| Synopsis | Use IS-IS SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-isis boolean | |
| Tree | sr-isis | |
Description | When configured to true, BGP uses an IS-IS tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered IS-IS instance. When configured to false, IS-IS tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sr-ospf boolean
| Synopsis | Use OSPF SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf boolean | |
| Tree | sr-ospf | |
Description | When configured to true, BGP uses an OSPF tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF instance. When configured to false, OSPF tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sr-ospf3 boolean
| Synopsis | Use OSPFv3 SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-ospf3 boolean | |
| Tree | sr-ospf3 | |
Description | When configured to true, BGP uses an OSPF3 tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OPSF3 instance. When configured to false, OSPF3 tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sr-policy boolean
| Synopsis | Use SR policies for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-policy boolean | |
| Tree | sr-policy | |
Description | When configured to true, this command instructs BGP to use an SR policy to determine the address of the BGP next hop.The SR policy search criteria includes a non-null endpoint and color value that matches the BGP next hop and color extended community value, respectively, of the EVPN route. When configured to false, SR policies are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
sr-te boolean
| Synopsis | Use SR-TE tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter sr-te boolean | |
| Tree | sr-te | |
Description | When configured to true, BGP uses an SR-TE tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered tunnel ID. When configured to false, SR-TE tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
udp boolean
| Synopsis | Use MPLS over UDP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-evpn mpls number auto-bind-tunnel resolution-filter udp boolean | |
| Tree | udp | |
Description | When configured to true, BGP uses an MPLS over UDP tunnel type to determine the address of the BGP next hop. When configured to false, MPLS over UDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service vprn string bgp-evpn mpls number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 20.10.R1 | |
Platforms | All | |
domain-id string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vprn string bgp-evpn mpls number domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 21.10.R1 | |
Platforms | All | |
dynamic-egress-label-limit boolean
| Synopsis | Enables dynamic egress label limit | |
| Context | configure service vprn string bgp-evpn mpls number dynamic-egress-label-limit boolean | |
| Tree | dynamic-egress-label-limit | |
Description | When configured to true, this command relaxes the egress MPLS label limit check when resolving BGP next hops in the tunnel table. For VPRN services, the OAM label is never computed and, therefore, one more egress label is allowed. For EVPN (Epipe and VPLS) services, the system only computes the control word and ESI label if they are used. For the control word, the system reduces the egress label limit by one label if the control word is configured in the service. When configured, the ESI label is not counted for Epipes or VPLS services without an ES. When configured to false this command, for EVPN, Epipe, and VPLS services, always accounts for the ESI label and control word. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
evi number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | EVPN instance ID | |
| Context | configure service vprn string bgp-evpn mpls number evi number | |
| Tree | evi | |
Description | This command configures the EVI that identifies the BGP EVPN instance in a VPRN (for the EVPN-IFL model) that is associated with the Layer 3 Ethernet segment. This configuration is required on the PEs attached to the Ethernet segment and on the remote PEs that need to create ES destinations to the MH Layer 3 Ethernet segment. | |
| Range | 1 to 16777215 | |
| Introduced | 22.10.R1 | |
Platforms | All | |
evpn-link-bandwidth
| Synopsis | Enter the evpn-link-bandwidth context | |
| Context | configure service vprn string bgp-evpn mpls number evpn-link-bandwidth | |
| Tree | evpn-link-bandwidth | |
| Introduced | 22.7.R1 | |
Platforms | All |
advertise
max-dynamic-weight number
| Synopsis | Maximum dynamic weight of the route | |
| Context | configure service vprn string bgp-evpn mpls number evpn-link-bandwidth advertise max-dynamic-weight number | |
| Tree | max-dynamic-weight | |
Description | This command configures the maximum weight advertised in the EVPN link bandwidth extended community for the advertised EVPN IP-Prefix routes for the service. If weight dynamic is configured, the actual advertised weight is the minimum of the number of BGP PE-CE paths for the prefix and the configured maximum weight. | |
| Range | 1 to 128 | |
| Default | 128 | |
| Introduced | 22.7.R1 | |
Platforms |
All |
weight (number | keyword)
| Synopsis | Weight of the route | |
| Context | configure service vprn string bgp-evpn mpls number evpn-link-bandwidth advertise weight (number | keyword) | |
| Tree | weight | |
Description | This command configures the weight advertised in the EVPN link bandwidth extended community for the advertised EVPN IP-Prefix routes for the service. If set to dynamic, the weight is dynamically set based on the number of BGP PE-CE paths for the IP-Prefix that is advertised in an EVPN IP-Prefix route. | |
| Range | 1 to 128 | |
| Options | ||
| Default | dynamic | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
weighted-ecmp boolean
| Synopsis | Enable weighted ECMP | |
| Context | configure service vprn string bgp-evpn mpls number evpn-link-bandwidth weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
Description | When configured to true, the router supports the processing of the EVPN link bandwidth extended community when installing an ECMP set for an EVPN IP-Prefix route in the VPRN route table. Flows to an IP Prefix received with a weight and a zero ESI value are sprayed according to the weight. If the EVPN IP-Prefix route received with the weight has a non-zero ESI, the weight is divided into the number of PEs attached to the Ethernet Segment (and rounded up if the result is not an integer). The command also enables the weighted ECMP functionality for BGP CEs that are configured with an evpn-link-bandwidth add-to-received-bgp weight. When configured to false, the router disables the processing of the EVPN link bandwidth extended community. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | All |
route-distinguisher (string | keyword)
| Synopsis | Route distinguisher | |
| Context | configure service vprn string bgp-evpn mpls number route-distinguisher (string | keyword) | |
| Tree | route-distinguisher | |
Description | This command specifies a unique route distinguisher (RD) to be associated with each routing instance to identify which VPN the route belongs to. | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms | All |
send-tunnel-encap
| Synopsis | Enter the send-tunnel-encap context | |
| Context | configure service vprn string bgp-evpn mpls number send-tunnel-encap | |
| Tree | send-tunnel-encap | |
| Introduced | 20.10.R1 | |
Platforms | All |
mpls boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS encapsulation | |
| Context | configure service vprn string bgp-evpn mpls number send-tunnel-encap mpls boolean | |
| Tree | mpls | |
| Default | true | |
| Introduced | 20.10.R1 | |
|
Platforms | All | |
mpls-over-udp boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable MPLS over UDP encapsulation | |
| Context | configure service vprn string bgp-evpn mpls number send-tunnel-encap mpls-over-udp boolean | |
| Tree | mpls-over-udp | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All | |
vrf-export
| Synopsis | Enable the vrf-export context | |
| Context | configure service vprn string bgp-evpn mpls number vrf-export | |
| Tree | vrf-export | |
| Introduced | 20.10.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-evpn mpls number vrf-export policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 20.10.R1 | |
Platforms | All |
vrf-import
| Synopsis | Enable the vrf-import context | |
| Context | configure service vprn string bgp-evpn mpls number vrf-import | |
| Tree | vrf-import | |
| Introduced | 20.10.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-evpn mpls number vrf-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 20.10.R1 | |
Platforms | All |
vrf-target
| Synopsis | Enter the vrf-target context | |
| Context | configure service vprn string bgp-evpn mpls number vrf-target | |
| Tree | vrf-target | |
Description | Commands in this context configure the route target that is added to advertised routes or compared against received routes from other VRFs on the same or remote PE routers (via MP-BGP). BGP-VPN and EVPN-IFL routes imported using a VRF target configuration use the BGP preference value of 170 when imported from remote PE routers, or retain the protocol preference value of the exported route when imported from other VRFs in the same router. Configured VRF import or export policies override the VRF target policy. | |
| Introduced | 20.10.R1 | |
Platforms | All |
community string
| Synopsis | Extended BGP community | |
| Context | configure service vprn string bgp-evpn mpls number vrf-target community string | |
| Tree | community | |
Description | This command configures an extended BGP community in the form type:x:y. Type can only be target and x and y are 16-bit integers. | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 20.10.R1 | |
Platforms | All |
export-community string
| Synopsis | Communities sent to remote PE neighbors | |
| Context | configure service vprn string bgp-evpn mpls number vrf-target export-community string | |
| Tree | export-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 20.10.R1 | |
Platforms | All |
import-community string
| Synopsis | Communities accepted from remote PE neighbors | |
| Context | configure service vprn string bgp-evpn mpls number vrf-target import-community string | |
| Tree | import-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 20.10.R1 | |
Platforms | All |
segment-routing-v6 [bgp-instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[bgp-instance] number
| Synopsis | BGP instance | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
admin-state keyword
| Synopsis | Administrative state of segment routing over IPv6 | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
default-route-tag string
| Synopsis | Default route tag | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
domain-id string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
evi number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | EVI information | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evi number | |
| Tree | evi | |
Description | This command configures the EVI that identifies the BGP EVPN instance in a VPRN (for the EVPN-IFL model) or an R-VPLS (for the EVPN-IFF model) that is associated with the Layer 3 Ethernet segment. This configuration is required on the PEs attached to the Ethernet segment and on the remote PEs that need to create ES destinations to the MH Layer 3 Ethernet segment. | |
| Range | 1 to 16777215 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
evpn-link-bandwidth
| Synopsis | Enter the evpn-link-bandwidth context | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evpn-link-bandwidth | |
| Tree | evpn-link-bandwidth | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
advertise
| Synopsis | Enable the advertise context | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evpn-link-bandwidth advertise | |
| Tree | advertise | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
max-dynamic-weight number
| Synopsis | Maximum dynamic weight of the route | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evpn-link-bandwidth advertise max-dynamic-weight number | |
| Tree | max-dynamic-weight | |
Description | This command configures the maximum weight advertised in the EVPN link bandwidth extended community for the advertised EVPN IP-Prefix routes for the service. The actual advertised weight is the minimum of the number of BGP PE-CE paths for the prefix and the configured maximum weight. | |
| Range | 1 to 128 | |
| Default | 128 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
weight (number | keyword)
| Synopsis | Weight of the route | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evpn-link-bandwidth advertise weight (number | keyword) | |
| Tree | weight | |
Description | This command configures the weight advertised in the EVPN link bandwidth extended community for the advertised EVPN IP-Prefix routes for the service. | |
| Range | 1 to 128 | |
| Options | ||
| Default | dynamic | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
weighted-ecmp boolean
| Synopsis | Enable weighted ECMP | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number evpn-link-bandwidth weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
Description | When configured to true, the router supports the processing of the EVPN link bandwidth extended community when installing an ECMP set for an EVPN IP-Prefix route in the VPRN route table. Flows to an IP Prefix received with a weight and a zero ESI value are sprayed according to the weight. If the EVPN IP-Prefix route received with the weight has a non-zero ESI, the weight is divided into the number of PEs attached to the Ethernet Segment (and rounded up if the result is not an integer). The command also enables the weighted ECMP functionality for BGP CEs that are configured with an evpn-link-bandwidth add-to-received-bgp weight. When configured to false, the router disables the processing of the EVPN link bandwidth extended community. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
resolution keyword
| Synopsis | Resolution options for routes | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | route-table | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
route-distinguisher (string | keyword)
| Synopsis | Route distinguisher | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number route-distinguisher (string | keyword) | |
| Tree | route-distinguisher | |
Description | This command specifies a unique route distinguisher (RD) to be associated with each routing instance to identify the VPN to which the route belongs. Alternatively, the system can automatically generate an RD based on the BGP automatic RD range configured at the configure service system level. | |
| Options | ||
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
source-address string
| Synopsis | Source IPv6 address | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number source-address string | |
| Tree | source-address | |
Description | When configured, this command specifies the source IPv6 address used in the SA field of the outer IPv6 header of the SRv6 encapsulated packet. When not configured, the source IPv6 address is inherited from the configuration of the global default address in the router "base" segment-routing segment-routing-v6 source-address context. A source IPv6 address must be configured in this context or in the base router context. The system does not check if the address entered is a valid local address. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
srv6
default-locator string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route locator | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number srv6 default-locator string | |
| Tree | default-locator | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Segment Routing IPv6 instance | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number srv6 instance reference | |
| Tree | instance | |
Reference | configure service vprn string segment-routing-v6 number | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
vrf-export
| Synopsis | Enable the vrf-export context | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-export | |
| Tree | vrf-export | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-export policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
vrf-import
| Synopsis | Enable the vrf-import context | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-import | |
| Tree | vrf-import | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
vrf-target
| Synopsis | Enter the vrf-target context | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-target | |
| Tree | vrf-target | |
Description | Commands in this context configure the route target that is added to advertised routes or compared against received routes from other VRFs on the same or remote PE routers (via MP-BGP). BGP-VPN and EVPN-IFL routes imported using a VRF target configuration use the BGP preference value of 170 when imported from remote PE routers, or retain the protocol preference value of the exported route when imported from other VRFs in the same router. Configured VRF import or export policies override the VRF target policy. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
community string
| Synopsis | Extended BGP community | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-target community string | |
| Tree | community | |
Description | This command configures an extended BGP community in the form type:x:y. Type can only be target and x and y are 16-bit integers. | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
export-community string
| Synopsis | Communities sent to remote PE neighbors | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-target export-community string | |
| Tree | export-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
import-community string
| Synopsis | Communities accepted from remote PE neighbors | |
| Context | configure service vprn string bgp-evpn segment-routing-v6 number vrf-target import-community string | |
| Tree | import-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
bgp-ipvpn
mpls
admin-state keyword
| Synopsis | Administrative state of BGP-IPVPN MPLS | |
| Context | configure service vprn string bgp-ipvpn mpls admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.2.R1 | |
Platforms | All |
auto-bind-tunnel
| Synopsis | Enter the auto-bind-tunnel context | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel | |
| Tree | auto-bind-tunnel | |
Description | Commands in this context configure the automatic binding parameters of a BGP-IPVPN service using tunnels to MP-BGP peers. | |
| Introduced | 21.2.R1 | |
Platforms | All |
allow-flex-algo-fallback boolean
| Synopsis | Enable flexible algorithm fallback | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel allow-flex-algo-fallback boolean | |
| Tree | allow-flex-algo-fallback | |
Description | When configured to true, a BGP router with a Flex-Algorithm action configured (via the configure policy-options policy-statement entry action flex-algo command) can resolve to a tunnel with algorithm 0 if no target Flex-Algorithm tunnel is available. When configured to false, the BGP router can resolve only to the intended Flex-Algorithm tunnel, which may cause traffic loss if no corresponding Flex-Algorithm tunnel is available. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
ecmp number
| Synopsis | Maximum ECMP routes allowed | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel ecmp number | |
| Tree | ecmp | |
Description | This command configures the maximum number of tunnels that can be used as ECMP next hops for the VPRN. This value overrides the ECMP value configured at the configure service vprn context level. | |
| Range | 1 to 32 | |
| Default | 1 | |
| Introduced | 21.2.R1 | |
Platforms |
All |
enforce-strict-tunnel-tagging boolean
| Synopsis | Allow enforcement of strict tunnel tagging | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel enforce-strict-tunnel-tagging boolean | |
| Tree | enforce-strict-tunnel-tagging | |
Description | When configured to true, the system must only consider LSPs marked with an administrative tag for next-hop resolution. When configured to false, tagged RSVP and SR-TE LSPs are considered first. The system then uses untagged LSPs of other types. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
resolution keyword
| Synopsis | Resolution method for tunnel selection | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | none | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
resolution-filter
| Synopsis | Enter the resolution-filter context | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter | |
| Tree | resolution-filter | |
Description | Commands in this context configure the subset of tunnel types that can be used in the resolution of BGP-IPVPN routes within the automatic binding of the BGP-IPVPN MPLS service to tunnels to MP-BGP peers. | |
| Introduced | 21.2.R1 | |
Platforms | All |
bgp boolean
| Synopsis | Use BGP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter bgp boolean | |
| Tree | bgp | |
Description | When configured to true, BGP searches the BGP LSP for the address of the BGP next hop. When configured to false, BGP tunneling is not used and inter-area or inter-as prefixes are not resolved. | |
| Default | true | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
gre boolean
| Synopsis | Use GRE tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter gre boolean | |
| Tree | gre | |
Description | When configured to true, this command enables setting the tunnel type for the auto bind tunnel. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
ldp boolean
| Synopsis | Use LDP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter ldp boolean | |
| Tree | ldp | |
Description | When configured to true, BGP searches for an LDP LSP with a FEC prefix corresponding to the address of the BGP next hop. When configured to false, LDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
mpls-fwd-policy boolean
| Synopsis | Use MPLS forwarding policy for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter mpls-fwd-policy boolean | |
| Tree | mpls-fwd-policy | |
Description | When configured to true, BGP uses the MPLS forwarding policy to determine the address of the BGP next hop. When configured to false, the MPLS forwarding policy is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
rib-api boolean
| Synopsis | Use RIB API gRPC service for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter rib-api boolean | |
| Tree | rib-api | |
Description | When configured to true, BGP uses tunnels programmed using the RIB API gRPC service to resolve the next hops of routes imported into the EVPN service. When configured to false, the RIB API service tunnels are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
rsvp boolean
| Synopsis | Use RSVP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter rsvp boolean | |
| Tree | rsvp | |
Description | When configured to true, BGP searches the best metric RSVP LSP to determine the address of the BGP next hop. This address can correspond to the system interface or to another loopback interface used by the BGP instance on the remote node. The LSP metric is provided by MPLS in the tunnel table. In the case of multiple RSVP LSPs with the same lowest metric, BGP selects the LSP with the lowest tunnel ID. When configured to false, the RSVP LSP is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
sr-isis boolean
| Synopsis | Use IS-IS SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter sr-isis boolean | |
| Tree | sr-isis | |
Description | When configured to true, BGP uses an IS-IS tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered IS-IS instance. When configured to false, IS-IS tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
sr-ospf boolean
| Synopsis | Use OSPF SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter sr-ospf boolean | |
| Tree | sr-ospf | |
Description | When configured to true, BGP uses an OSPF tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OSPF instance. When configured to false, OSPF tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
sr-ospf3 boolean
| Synopsis | Use OSPFv3 SR tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter sr-ospf3 boolean | |
| Tree | sr-ospf3 | |
Description | When configured to true, BGP uses an OSPFv3 tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered OSPFv3 instance. When configured to false, OSPFv3 tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
sr-policy boolean
| Synopsis | Use SR policies for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter sr-policy boolean | |
| Tree | sr-policy | |
Description | When configured to true, SR policies are used to determine the address of the BGP next hop. The SR policy search criteria includes a non-null endpoint and color value that matches the BGP next hop and color extended community value, respectively, of the EVPN route. When configured to false, SR policies are not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
sr-te boolean
| Synopsis | Use SR-TE tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter sr-te boolean | |
| Tree | sr-te | |
Description | When configured to true, BGP uses an SR-TE tunnel type to determine the address of the BGP next hop. The SR tunnel to the BGP next hop is selected in the TTM from the lowest-numbered tunnel ID. When configured to false, SR-TE tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
udp boolean
| Synopsis | Use MPLS over UDP tunneling for next-hop resolution | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel resolution-filter udp boolean | |
| Tree | udp | |
Description | When configured to true, BGP uses an MPLS over UDP tunnel type to determine the address of the BGP next hop. When configured to false, MPLS over UDP tunneling is not used for next-hop resolution. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
weighted-ecmp boolean
| Synopsis | Allow weighted load-balancing | |
| Context | configure service vprn string bgp-ipvpn mpls auto-bind-tunnel weighted-ecmp boolean | |
| Tree | weighted-ecmp | |
Description | When configured to true, this command enables weighted ECMP for packets using tunnels that a VPRN automatically binds to. Packets are sprayed across LSPs in the ECMP according to the outcome of the hash algorithm and the configured load balancing weight of each LSP. When configured to false, this command disables weighted ECMP for next-hop tunnel selection. | |
| Default | false | |
| Introduced | 21.2.R1 | |
|
Platforms | All |
domain-id string
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vprn string bgp-ipvpn mpls domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 21.10.R1 | |
Platforms | All |
dynamic-egress-label-limit boolean
| Synopsis | Enables dynamic egress label limit | |
| Context | configure service vprn string bgp-ipvpn mpls dynamic-egress-label-limit boolean | |
| Tree | dynamic-egress-label-limit | |
Description | When configured to true, this command relaxes the egress MPLS label limit check when resolving BGP next hops in the tunnel table. For VPRN services, the OAM label is never computed and, therefore, one more egress label is allowed. For EVPN (Epipe and VPLS) services, the system only computes the control word and ESI label if they are used. For the control word, the system reduces the egress label limit by one label if the control word is configured in the service. When configured, the ESI label is not counted for Epipes or VPLS services without an ES. When configured to false this command, for EVPN, Epipe, and VPLS services, always accounts for the ESI label and control word. | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | All |
route-distinguisher (string | keyword)
| Synopsis | Route distinguisher | |
| Context | configure service vprn string bgp-ipvpn mpls route-distinguisher (string | keyword) | |
| Tree | route-distinguisher | |
Description | This command specifies a unique route distinguisher (RD) to be associated with each routing instance to identify which VPN the route belongs to. | |
| Options | ||
| Introduced | 21.2.R1 | |
Platforms | All |
vrf-export
| Synopsis | Enable the vrf-export context | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-export | |
| Tree | vrf-export | |
| Introduced | 21.2.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-export policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 21.2.R1 | |
Platforms | All |
vrf-import
| Synopsis | Enable the vrf-import context | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-import | |
| Tree | vrf-import | |
| Introduced | 21.2.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 21.2.R1 | |
Platforms | All |
vrf-target
| Synopsis | Enter the vrf-target context | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-target | |
| Tree | vrf-target | |
Description | Commands in this context configure the route target that is added to advertised routes or compared against received routes from other VRFs on the same or remote PE routers (via MP-BGP). BGP-VPN and EVPN-IFL routes imported using a VRF target configuration use the BGP preference value of 170 when imported from remote PE routers, or retain the protocol preference value of the exported route when imported from other VRFs in the same router. Configured VRF import or export policies override the VRF target policy. | |
| Introduced | 21.2.R1 | |
Platforms | All |
community string
| Synopsis | Extended BGP community | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-target community string | |
| Tree | community | |
Description | This command configures an extended BGP community in the form type:x:y. Type can only be target and x and y are 16-bit integers. | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.2.R1 | |
Platforms | All |
export-community string
| Synopsis | Communities sent to remote PE neighbors | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-target export-community string | |
| Tree | export-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.2.R1 | |
Platforms | All |
import-community string
| Synopsis | Communities accepted from remote PE neighbors | |
| Context | configure service vprn string bgp-ipvpn mpls vrf-target import-community string | |
| Tree | import-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.2.R1 | |
Platforms | All |
segment-routing-v6 [bgp-instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[bgp-instance] number
| Synopsis | BGP instance | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
admin-state keyword
| Synopsis | Administrative state of segment routing over IPv6 | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
default-route-tag string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route tag | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number default-route-tag string | |
| Tree | default-route-tag | |
Description | This command configures a route tag that is used when sending a route to the BGP application (for the corresponding service and BGP instance). If the corresponding BGP instance is enabled, the command cannot be changed. When used for BGP EVPN contexts, only one route tag can be passed to BGP for matching on export policies. In case of a conflict with other route tags pushed by EVPN, the default route tag has the least priority. The following are examples of the conflict priority handling:
The default-route-tag configuration is only supported on EVPN and IP-VPN service routes. The route tag for ES and AD per-ES routes is always zero. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
domain-id string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Domain ID of received BGP route before readvertisement | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number domain-id string | |
| Tree | domain-id | |
Description | This command specifies the domain ID. The domain ID identifies the network from which the BGP route was received before the RTM advertises it to a different neighbor. The domain ID is part of a domain, represented as domain-id:isf_safi_type in the D-PATH attribute, as described in draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN-IFL and BGP-IPVPN) or multiple instances of the same owner (for example, VPRN with two BGP-IPVPN instances). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). In the following example, suppose a gateway receives prefix P in an EVPN-IFL instance with the following D-PATH from neighbor N: Seg Len=1 / 65000:1:128 If the router imports the route in VPRN-1, BGP-EVPN SRv6 instance with domain 65000:2, it readvertises it to its BGP-IPVPN MPLS instance as follows: Seg Len=2 / 65000:2:70 / 65000:1:128 That is, the gateway prepends the local domain ID and family to the D-PATH before readvertising the route into a different instance. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
resolution keyword
| Synopsis | Resolution options for routes | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number resolution keyword | |
| Tree | resolution | |
| Options | ||
| Default | route-table | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
route-distinguisher (string | keyword)
| Synopsis | Route distinguisher | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number route-distinguisher (string | keyword) | |
| Tree | route-distinguisher | |
Description | This command specifies a unique route distinguisher (RD) to be associated with each routing instance to identify the VPN to which the route belongs. Alternatively, the system can automatically generate an RD based on the BGP automatic RD range configured at the configure service system level. | |
| Options | ||
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
source-address string
| Synopsis | Source IPv6 address | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number source-address string | |
| Tree | source-address | |
Description | When configured, this command specifies the source IPv6 address used in the SA field of the outer IPv6 header of the SRv6 encapsulated packet. When not configured, the source IPv6 address is inherited from the configuration of the global default address in the router "base" segment-routing segment-routing-v6 source-address context. A source IPv6 address must be configured in this context or in the base router context. The system does not check if the address entered is a valid local address. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
srv6
default-locator string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Default route locator | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number srv6 default-locator string | |
| Tree | default-locator | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
instance reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Segment Routing IPv6 instance | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number srv6 instance reference | |
| Tree | instance | |
Reference | configure service vprn string segment-routing-v6 number | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR | |
vrf-export
| Synopsis | Enable the vrf-export context | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-export | |
| Tree | vrf-export | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-export policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
vrf-import
| Synopsis | Enable the vrf-import context | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-import | |
| Tree | vrf-import | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
policy (policy-expr-string | string)
| Synopsis | Policy name | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command configures VRF route policies that control routes between local VRFs and other VRFs on the same or remote PE routers (using MP-BGP). Each referenced object is either a policy logical expression or the name of a single policy. Only one referenced object can be a policy logical expression consisting of policy names (enclosed in square brackets) and logical operators (AND, OR, NOT). The objects are evaluated in the specified order to determine whether to accept or reject the route. Only the first policy can have the maximum length and the rest can be up to 64 characters. Aggregate routes are not advertised using MP-BGP protocols to the other MP-BGP peers. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | This element is ordered by the user. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
vrf-target
| Synopsis | Enter the vrf-target context | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-target | |
| Tree | vrf-target | |
Description | Commands in this context configure the route target that is added to advertised routes or compared against received routes from other VRFs on the same or remote PE routers (via MP-BGP). BGP-VPN and EVPN-IFL routes imported using a VRF target configuration use the BGP preference value of 170 when imported from remote PE routers, or retain the protocol preference value of the exported route when imported from other VRFs in the same router. Configured VRF import or export policies override the VRF target policy. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
community string
| Synopsis | Extended BGP community | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-target community string | |
| Tree | community | |
Description | This command configures an extended BGP community in the form type:x:y. Type can only be target and x and y are 16-bit integers. | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
export-community string
| Synopsis | Communities sent to remote PE neighbors | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-target export-community string | |
| Tree | export-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
import-community string
| Synopsis | Communities accepted from remote PE neighbors | |
| Context | configure service vprn string bgp-ipvpn segment-routing-v6 number vrf-target import-community string | |
| Tree | import-community | |
| String Length | 10 to 28 | |
Notes | The following elements are part of a choice: community or (export-community and import-community). | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
bgp-shared-queue
| Synopsis | Enable the bgp-shared-queue context | |
| Context | configure service vprn string bgp-shared-queue | |
| Tree | bgp-shared-queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | Committed information rate for shared queue | |
| Context | configure service vprn string bgp-shared-queue cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 100000000 | |
| Units | kilobps | |
| Options | ||
| Default | 4000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
pir (number | keyword)
| Synopsis | Peak information rate for shared queue | |
| Context | configure service vprn string bgp-shared-queue pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 100000000 | |
| Units | kilobps | |
| Options | ||
| Default | 4000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
bgp-vpn-backup
| Synopsis | Enter the bgp-vpn-backup context | |
| Context | configure service vprn string bgp-vpn-backup | |
| Tree | bgp-vpn-backup | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
| Synopsis | Allow BGP-VPN to be used as backup for IPv4 prefixes | |
| Context | configure service vprn string bgp-vpn-backup ipv4 boolean | |
| Tree | ipv4 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6 boolean
| Synopsis | Allow BGP-VPN to be used as backup for IPv6 prefixes | |
| Context | configure service vprn string bgp-vpn-backup ipv6 boolean | |
| Tree | ipv6 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
carrier-carrier-vpn boolean
| Synopsis | Allow VPRN service to support a Carrier Supporting Carrier model | |
| Context | configure service vprn string carrier-carrier-vpn boolean | |
| Tree | carrier-carrier-vpn | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
class-forwarding boolean
| Synopsis | Allow packet forwarding based on forwarding class | |
| Context | configure service vprn string class-forwarding boolean | |
| Tree | class-forwarding | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
confederation
| Synopsis | Enter the confederation context | |
| Context | configure service vprn string confederation | |
| Tree | confederation | |
| Introduced | 16.0.R1 | |
Platforms | All |
confed-as-num number
| Synopsis | Confederation number within an autonomous system | |
| Context | configure service vprn string confederation confed-as-num number | |
| Tree | confed-as-num | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
members [as-number] number
| Synopsis | Add a list entry for members | |
| Context | configure service vprn string confederation members number | |
| Tree | members | |
| Max. Instances | 256 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[as-number] number
| Synopsis | Confederation AS number | |
| Context | configure service vprn string confederation members number | |
| Tree | members | |
| Range | 1 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
customer reference
d-path-length-ignore boolean
| Synopsis | Enable D-PATH length ignore | |
| Context | configure service vprn string d-path-length-ignore boolean | |
| Tree | d-path-length-ignore | |
Description | When configured to true, the VPRN RTM ignores the D-PATH domain segment length for best path selection purposes (for routes in the VPRN). This allows the user to control whether the RTM considers the D-PATH length when comparing two VPN routes with different RDs. When configured to false, the router does not ignore the D-PATH domain segment length. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dhcp-server
| Synopsis | Enter the dhcp-server context | |
| Context | configure service vprn string dhcp-server | |
| Tree | dhcp-server | |
| Introduced | 16.0.R1 | |
Platforms | All |
dhcpv4 [name] string
| Synopsis | Enter the dhcpv4 list instance | |
| Context | configure service vprn string dhcp-server dhcpv4 string | |
| Tree | dhcpv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | DHCP server name | |
| Context | configure service vprn string dhcp-server dhcpv4 string | |
| Tree | dhcpv4 | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP server | |
| Context | configure service vprn string dhcp-server dhcpv4 string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string dhcp-server dhcpv4 string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
admin-state keyword
| Synopsis | Administrative state of the failover mechanism | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-mclt-on-takeover boolean
| Synopsis | Ignore maximum client lead during takeover from partner | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover ignore-mclt-on-takeover boolean | |
| Tree | ignore-mclt-on-takeover | |
Description | When configured to true, the remote IP address range can be taken over immediately when the intercommunication link enters the PARTNER-DOWN state, without having to wait for the MCLT to expire. When configured to false, the DHCP lease time for new clients is restricted to the MCLT during a failure. For existing clients, the lease time is gradually reduced over time to the MCLT by consecutive DHCP renewals. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-client-lead-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum time that DHCP server can extend client's lease | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover maximum-client-lead-time number | |
| Tree | maximum-client-lead-time | |
Description | This command configures the maximum client lead time (MCLT), which is the maximum time that a DHCP server can extend the client's lease time beyond the lease time currently known by the DHCP partner node. In dual-homed environments, the initial lease time for all DHCP clients is restricted to the MCLT by default. Consecutive DHCP renewals can extend the lease time beyond the MCLT. | |
| Range | 600 to 86399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
partner-down-delay number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Delay to prevent lease duplication during link failure | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover partner-down-delay number | |
| Tree | partner-down-delay | |
Description | This command configures the interval before a failed intercommunication link transitions from the COMM-INT state to the PARTNER-DOWN state. This delay prevents IP lease duplication during link failure by not allowing new IP addresses to be assigned from the remote IP address range. This timer is intended to provide the operator with enough time to remedy the failed situation and avoid duplication of IP addresses and prefixes during the failure. | |
| Range | 0 to 86399 | |
| Units | seconds | |
| Default | 86399 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
peer [address] reference
[address] reference
| Synopsis | IP address of the failover peer | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sync-tag string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag that identifies synchronizing server or pool pairs | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover peer reference sync-tag string | |
| Tree | sync-tag | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
startup-wait-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time between initialization and assuming active role | |
| Context | configure service vprn string dhcp-server dhcpv4 string failover startup-wait-time number | |
| Tree | startup-wait-time | |
Description | This command configures a delay that avoids transient issues during the initialization process. During startup wait time, each failover peer waits after the initialization process before assuming the active role for the prefix designated as local or remote. | |
| Range | 60 to 3600 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
force-renews boolean
| Synopsis | Send FORCERENEW messages to force renewals of leases | |
| Context | configure service vprn string dhcp-server dhcpv4 string force-renews boolean | |
| Tree | force-renews | |
Description | When configured to true, FORCERENEW messages are enabled for DHCP. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-hold
| Synopsis | Enter the lease-hold context | |
| Context | configure service vprn string dhcp-server dhcpv4 string lease-hold | |
| Tree | lease-hold | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
additional-scenarios
| Synopsis | Enter the additional-scenarios context | |
| Context | configure service vprn string dhcp-server dhcpv4 string lease-hold additional-scenarios | |
| Tree | additional-scenarios | |
Description | Commands in this context configure additional types of leases or triggers that cause the system to hold up leases. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
internal-lease-ipsec boolean
| Synopsis | Apply the lease hold timer to local IPsec clients | |
| Context | configure service vprn string dhcp-server dhcpv4 string lease-hold additional-scenarios internal-lease-ipsec boolean | |
| Tree | internal-lease-ipsec | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicited-release boolean
| Synopsis | Apply lease hold timer for solicited releases | |
| Context | configure service vprn string dhcp-server dhcpv4 string lease-hold additional-scenarios solicited-release boolean | |
| Tree | solicited-release | |
Description | This command enables the server to hold up a lease even for a solicited release, for example, when the server receives a normal DHCP release message. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
time number
| Synopsis | Lease hold time | |
| Context | configure service vprn string dhcp-server dhcpv4 string lease-hold time number | |
| Tree | time | |
| Range | 1 to 631152000 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool [pool-name] string
[pool-name] string
description string
| Synopsis | Text description | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
admin-state keyword
| Synopsis | Administrative state of the failover mechanism | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-mclt-on-takeover boolean
| Synopsis | Ignore maximum client lead during takeover from partner | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover ignore-mclt-on-takeover boolean | |
| Tree | ignore-mclt-on-takeover | |
Description | When configured to true, the remote IP address range can be taken over immediately when the intercommunication link enters the PARTNER-DOWN state, without having to wait for the MCLT to expire. When configured to false, the DHCP lease time for new clients is restricted to the MCLT during a failure. For existing clients, the lease time is gradually reduced over time to the MCLT by consecutive DHCP renewals. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-client-lead-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum time that DHCP server can extend client's lease | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover maximum-client-lead-time number | |
| Tree | maximum-client-lead-time | |
Description | This command configures the maximum client lead time (MCLT), which is the maximum time that a DHCP server can extend the client's lease time beyond the lease time currently known by the DHCP partner node. In dual-homed environments, the initial lease time for all DHCP clients is restricted to the MCLT by default. Consecutive DHCP renewals can extend the lease time beyond the MCLT. | |
| Range | 600 to 86399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
partner-down-delay number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Delay to prevent lease duplication during link failure | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover partner-down-delay number | |
| Tree | partner-down-delay | |
Description | This command configures the interval before a failed intercommunication link transitions from the COMM-INT state to the PARTNER-DOWN state. This delay prevents IP lease duplication during link failure by not allowing new IP addresses to be assigned from the remote IP address range. This timer is intended to provide the operator with enough time to remedy the failed situation and avoid duplication of IP addresses and prefixes during the failure. | |
| Range | 0 to 86399 | |
| Units | seconds | |
| Default | 86399 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
peer [address] reference
[address] reference
| Synopsis | IP address of the failover peer | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sync-tag string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag that identifies synchronizing server or pool pairs | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover peer reference sync-tag string | |
| Tree | sync-tag | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
startup-wait-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time between initialization and assuming active role | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string failover startup-wait-time number | |
| Tree | startup-wait-time | |
Description | This command configures a delay that avoids transient issues during the initialization process. During startup wait time, each failover peer waits after the initialization process before assuming the active role for the prefix designated as local or remote. | |
| Range | 60 to 3600 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
max-lease-time number
| Synopsis | Maximum lease time | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string max-lease-time number | |
| Tree | max-lease-time | |
| Range | 10 to 315446399 | |
| Units | seconds | |
| Default | 864000 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-lease-time number
| Synopsis | Minimum lease time | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string min-lease-time number | |
| Tree | min-lease-time | |
| Range | 10 to 315446399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
minimum-free
| Synopsis | Enter the minimum-free context | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string minimum-free | |
| Tree | minimum-free | |
Description | Commands in this context specify the minimum number of free addresses in this pool. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
absolute number
| Synopsis | Minimum number of free addresses in this pool or subnet | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string minimum-free absolute number | |
| Tree | absolute | |
| Range | 0 to 255 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
event-when-depleted boolean
| Synopsis | Generate notification when addresses are depleted | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string minimum-free event-when-depleted boolean | |
| Tree | event-when-depleted | |
Description | When configured to true, a system-generated event is generated when all available addresses in the pool or subnet of a local DHCP server are depleted. When configured to false, no action is taken when all available addresses in the pool or subnet of a local DHCP server are depleted. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
percent number
| Synopsis | Minimum free addresses as a percentage | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string minimum-free percent number | |
| Tree | percent | |
| Range | 0 to 100 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nak-non-matching-subnet boolean
| Synopsis | Send NAK if no match for request address pool range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string nak-non-matching-subnet boolean | |
| Tree | nak-non-matching-subnet | |
Description | When configured to true, a NAK response when the local DHCPv4 server receives a DHCP request with option 50 (the client is trying to request a previously allocated message). If the address-allocation algorithm uses a pool that does not contain the requested address, the system returns the DHCP NAK. When configured to false or unconfigured, the system drops the DHCP packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
offer-time number
| Synopsis | Time interval during which a DHCP offer remains valid | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string offer-time number | |
| Tree | offer-time | |
| Range | 10 to 600 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
option [number] (number | keyword)
[number] (number | keyword)
| Synopsis | DHCP option to send identification strings to client | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) | |
| Tree | option | |
| Range | 1 to 254 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DHCP option specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duration number
| Synopsis | DHCP option as time duration | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) duration number | |
| Tree | duration | |
| Range | 10 to 315446399 | |
| Units | seconds | |
|
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
empty
| Synopsis | Empty DHCP option. | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) empty | |
| Tree | empty | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DHCP option specified as hexadecimal string | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 256 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4-address string
| Synopsis | DHCP option as a list of IPv4 addresses | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) ipv4-address string | |
| Tree | ipv4-address | |
| Max. Instances | 4 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
netbios-node-type keyword
| Synopsis | DHCP option as NetBIOS node type | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string options option (number | keyword) netbios-node-type keyword | |
| Tree | netbios-node-type | |
| Options | ||
|
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subnet [ipv4-prefix] string
[ipv4-prefix] string
address-range [start] string end string
| Synopsis | Enter the address-range list instance | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string address-range string end string | |
| Tree | address-range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[start] string
| Synopsis | Lower bound of the IP address range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string address-range string end string | |
| Tree | address-range | |
Description | This command specifies the start of a range of IP addresses that are excluded from the pool of IP addresses in this subnet. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end string
| Synopsis | Upper bound of the IP address range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string address-range string end string | |
| Tree | address-range | |
Description | This command specifies the end of a range of IP addresses that are excluded from the pool of IP addresses in this subnet. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover-control-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Failover control type for this range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string address-range string end string failover-control-type keyword | |
| Tree | failover-control-type | |
| Options | ||
| Default | local | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
drain boolean
| Synopsis | Prevent new lease assignment from this subnet | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string drain boolean | |
| Tree | drain | |
Description | When configured to true, new leases cannot be assigned and existing leases are kept up until they are released. When configured to false, the subnet is active and new leases can be assigned. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
exclude-addresses [start] string end string
| Synopsis | Add a list entry for exclude-addresses | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string exclude-addresses string end string | |
| Tree | exclude-addresses | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[start] string
| Synopsis | Lower bound of the IP address range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string exclude-addresses string end string | |
| Tree | exclude-addresses | |
Description | This command specifies the start of a range of IP addresses that are excluded from the pool of IP addresses in this subnet. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end string
| Synopsis | Upper bound of the IP address range | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string exclude-addresses string end string | |
| Tree | exclude-addresses | |
Description | This command specifies the end of a range of IP addresses that are excluded from the pool of IP addresses in this subnet. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-declined number
| Synopsis | Maximum number of declined addresses allowed | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string maximum-declined number | |
| Tree | maximum-declined | |
| Max. Range | 0 to 4294967295 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
minimum-free
| Synopsis | Enter the minimum-free context | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string minimum-free | |
| Tree | minimum-free | |
Description | Commands in this context specify the minimum number of free addresses in this pool. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
absolute number
| Synopsis | Minimum number of free addresses in this pool or subnet | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string minimum-free absolute number | |
| Tree | absolute | |
| Range | 0 to 255 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
event-when-depleted boolean
| Synopsis | Generate notification when addresses are depleted | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string minimum-free event-when-depleted boolean | |
| Tree | event-when-depleted | |
Description | When configured to true, a system-generated event is generated when all available addresses in the pool or subnet of a local DHCP server are depleted. When configured to false, no action is taken when all available addresses in the pool or subnet of a local DHCP server are depleted. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
percent number
| Synopsis | Minimum free addresses as a percentage | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string minimum-free percent number | |
| Tree | percent | |
| Range | 0 to 100 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
option [number] (number | keyword)
[number] (number | keyword)
| Synopsis | DHCP option to send identification strings to client | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) | |
| Tree | option | |
| Range | 1 to 254 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DHCP option specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duration number
| Synopsis | DHCP option as time duration | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) duration number | |
| Tree | duration | |
| Range | 10 to 315446399 | |
| Units | seconds | |
|
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
empty
| Synopsis | Empty DHCP option | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) empty | |
| Tree | empty | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DHCP option specified as hexadecimal string | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 256 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4-address string
| Synopsis | DHCP option as a list of IPv4 addresses | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) ipv4-address string | |
| Tree | ipv4-address | |
| Max. Instances | 4 | |
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
netbios-node-type keyword
| Synopsis | DHCP option as NetBIOS node type | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool string subnet string options option (number | keyword) netbios-node-type keyword | |
| Tree | netbios-node-type | |
| Options | ||
|
Notes | The following elements are part of a mandatory choice: ascii-string, duration, empty, hex-string, ipv4-address, or netbios-node-type. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool-selection
| Synopsis | Enter the pool-selection context | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool-selection | |
| Tree | pool-selection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-gi-address
| Synopsis | Enable the use-gi-address context | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool-selection use-gi-address | |
| Tree | use-gi-address | |
Description | Commands in this context configure gateway interface (GI) address matching. When configured, the pool can be used for address matching even if a subnet is not found. If the local user database name is not used, addresses are provided only by GI. If a user must be blocked from getting an address, the server maps to a local user database and configures the user with no address. A pool can include multiple subnets. Since the GI is shared by multiple subnets in a subscriber interface, the pool can provide IP addresses from any of the subnets included when the GI is matched to one of its subnets. This allows a pool to be created that represents a sub-net. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | GI address-matching scope | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool-selection use-gi-address scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subnet | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-pool-from-client
| Synopsis | Enable the use-pool-from-client context | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool-selection use-pool-from-client | |
| Tree | use-pool-from-client | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
delimiter string
| Synopsis | Delimiter to combine primary and secondary pool names | |
| Context | configure service vprn string dhcp-server dhcpv4 string pool-selection use-pool-from-client delimiter string | |
| Tree | delimiter | |
Description | This command configures a single ASCII character that separates the pool names in DHCP vendor-specific option 82, which identifies the address pool to be used for this client. | |
| String Length | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database for authentication | |
| Context | configure service vprn string dhcp-server dhcpv4 string user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-identification keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | User identification method for the DHCP server | |
| Context | configure service vprn string dhcp-server dhcpv4 string user-identification keyword | |
| Tree | user-identification | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
dhcpv6 [name] string
| Synopsis | Enter the dhcpv6 list instance | |
| Context | configure service vprn string dhcp-server dhcpv6 string | |
| Tree | dhcpv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | DHCP server name | |
| Context | configure service vprn string dhcp-server dhcpv6 string | |
| Tree | dhcpv6 | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP server | |
| Context | configure service vprn string dhcp-server dhcpv6 string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-provisioned boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Auto-provision the pools of this server | |
| Context | configure service vprn string dhcp-server dhcpv6 string auto-provisioned boolean | |
| Tree | auto-provisioned | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
defaults
options
option [number] (number | keyword)
[number] (number | keyword)
| Synopsis | DHCP option to send as identification string | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) | |
| Tree | option | |
| Range | 1 to 65535 | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DHCP option specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
domain-string string
| Synopsis | DHCP option specified as a domain name | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) domain-string string | |
| Tree | domain-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duration number
| Synopsis | DHCP option specified as time | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) duration number | |
| Tree | duration | |
| Range | 10 to 315446399 | |
| Units | seconds | |
|
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
empty
| Synopsis | Empty DHCP option | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) empty | |
| Tree | empty | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DHCP option specified as hexadecimal string | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 256 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6-address string
| Synopsis | DHCP option specified as a list of IPv6 addresses | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults options option (number | keyword) ipv6-address string | |
| Tree | ipv6-address | |
| Max. Instances | 4 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime number
| Synopsis | Time this lease remains preferred | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults preferred-lifetime number | |
| Tree | preferred-lifetime | |
Description | This command configures the preferred lifetime of the IPv6 lease address or prefix. When the preferred lifetime expires, any derived addresses are deprecated. The preferred lifetime must be less than or equal to the valid lifetime. Each address or prefix assigned to the client has associated preferred and valid lifetimes specified by the address assignment authority (such as the DHCP server, RADIUS, or ESM). To request an extension of the lifetimes assigned to an address, the client sends a renew message to the addressing authority. The authority sends a reply message to the client with the new lifetimes, allowing the client to continue to use the address/prefix without interruption. The lifetimes are transmitted from the addressing authority to the client in the identity association (IA) option at the top level of the message (not the address or prefix level). | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rebind-time number
| Synopsis | Rebind time for the lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults rebind-time number | |
| Tree | rebind-time | |
Description | This command configures the rebind time, known as T2, at which the client contacts the addressing authority to extend the lifetimes of its leases. The IP addressing authority (such as the DHCP server, RADIUS, or ESM) controls the time for extending lifetimes on assigned addresses/prefixes through the T1 and T2 parameters assigned to an identity association (IA). At renew time, T1, the client initiates a renew or reply message exchange to extend the lifetimes of any addresses in the IA. The client includes an IA option with all addresses or prefixes currently assigned to the IA in its renew message. Recommended values for T1 and T2 are 0.5 and 0.8 times the shortest preferred lifetime of the addresses or prefixes in the IA that the addressing authority is willing to extend, respectively. The configured rebind timer value should always be less than or equal to the rebind timer. The T1 and T2 values are carried in the IPV6 address option in the IA. | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-time number
| Synopsis | Renew time for the lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults renew-time number | |
| Tree | renew-time | |
Description | This command configures the renew time, known as T1, at which the client makes a transition to the lease-renewal state. The IP addressing authority (such as the DHCP server, RADIUS, or ESM) controls the time for extending lifetimes on assigned addresses/prefixes through the T1 and T2 parameters assigned to an identity association (IA). At renew time, T1, the client initiates a renew/reply message exchange to extend the lifetimes of any addresses in the IA. The client includes an IA option with all addresses/prefixes currently assigned to the IA in its renew message. Recommended values for T1 and T2 are 0.5 and 0.8 times the shortest preferred lifetime of the addresses or prefixes in the IA that the addressing authority is willing to extend, respectively. The configured renew timer value should always be shorter than or equal to the rebind timer. The T1 and T2 values are carried in the IPV6 address option in the IA. | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | Time for the lease to remain valid | |
| Context | configure service vprn string dhcp-server dhcpv6 string defaults valid-lifetime number | |
| Tree | valid-lifetime | |
Description | This command configures a valid lifetime for a DHCPv6 lease address or prefix. The valid lifetime is the length of time an address and prefix remains in the valid state. The valid lifetime must be greater than or equal to the preferred lifetime. When the valid lifetime expires, the address and prefix becomes invalid and must not be used in communications. RFC 2461 recommends a default value of 30 days. Each address and prefix assigned to the client has associated preferred and valid lifetimes specified by the address assignment authority (such as the DHCP server, RADIUS, or ESM). To request an extension of the lifetimes assigned to an address, the client sends a renew message to the addressing authority. The authority sends a reply message to the client with the new lifetimes, allowing the client to continue to use the address and prefix without interruption. The lifetimes are transmitted from the addressing authority to the client in the identity association (IA) option at the top level of the message (not the address or prefix level). | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 86400 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string dhcp-server dhcpv6 string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
admin-state keyword
| Synopsis | Administrative state of the failover mechanism | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-mclt-on-takeover boolean
| Synopsis | Ignore maximum client lead during takeover from partner | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover ignore-mclt-on-takeover boolean | |
| Tree | ignore-mclt-on-takeover | |
Description | When configured to true, the remote IP address range can be taken over immediately when the intercommunication link enters the PARTNER-DOWN state, without having to wait for the MCLT to expire. When configured to false, the DHCP lease time for new clients is restricted to the MCLT during a failure. For existing clients, the lease time is gradually reduced over time to the MCLT by consecutive DHCP renewals. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-client-lead-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum time that DHCP server can extend client's lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover maximum-client-lead-time number | |
| Tree | maximum-client-lead-time | |
Description | This command configures the maximum client lead time (MCLT), which is the maximum time that a DHCP server can extend the client's lease time beyond the lease time currently known by the DHCP partner node. In dual-homed environments, the initial lease time for all DHCP clients is restricted to the MCLT by default. Consecutive DHCP renewals can extend the lease time beyond the MCLT. | |
| Range | 600 to 86399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
partner-down-delay number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Delay to prevent lease duplication during link failure | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover partner-down-delay number | |
| Tree | partner-down-delay | |
Description | This command configures the interval before a failed intercommunication link transitions from the COMM-INT state to the PARTNER-DOWN state. This delay prevents IP lease duplication during link failure by not allowing new IP addresses to be assigned from the remote IP address range. This timer is intended to provide the operator with enough time to remedy the failed situation and avoid duplication of IP addresses and prefixes during the failure. | |
| Range | 0 to 86399 | |
| Units | seconds | |
| Default | 86399 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
peer [address] reference
[address] reference
| Synopsis | IP address of the failover peer | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sync-tag string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag that identifies synchronizing server or pool pairs | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover peer reference sync-tag string | |
| Tree | sync-tag | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
startup-wait-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time between initialization and assuming active role | |
| Context | configure service vprn string dhcp-server dhcpv6 string failover startup-wait-time number | |
| Tree | startup-wait-time | |
Description | This command configures a delay that avoids transient issues during the initialization process. During startup wait time, each failover peer waits after the initialization process before assuming the active role for the prefix designated as local or remote. | |
| Range | 60 to 3600 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ignore-rapid-commit boolean
| Synopsis | Ignore Rapid Commit option | |
| Context | configure service vprn string dhcp-server dhcpv6 string ignore-rapid-commit boolean | |
| Tree | ignore-rapid-commit | |
Description | When configured to true, the server ignores the Rapid Commit option sent by the client and uses the regular message exchange. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface-id-mapping boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Map hosts within interface-to-prefix combinations | |
| Context | configure service vprn string dhcp-server dhcpv6 string interface-id-mapping boolean | |
| Tree | interface-id-mapping | |
Description | When configured to true, this command specifies an interface-mapping method that uses a combination of unique /64 prefixes and interface IDs. A /64 prefix is allocated to each interface ID, and all clients with the same interface ID are assigned an address from the prefix. This method is used for bridging clients in the same local loop and SAP, so that sharing the prefix allows communication to stay local. For SLAAC-based assignment, downstream neighbor discovery is automatically enabled to resolve the assigned address. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
lease-hold
| Synopsis | Enter the lease-hold context | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-hold | |
| Tree | lease-hold | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
additional-scenarios
| Synopsis | Enter the additional-scenarios context | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-hold additional-scenarios | |
| Tree | additional-scenarios | |
Description | Commands in this context configure additional types of leases or triggers that cause the system to hold up leases. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
internal-lease-ipsec boolean
| Synopsis | Apply the lease hold timer to local IPsec clients | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-hold additional-scenarios internal-lease-ipsec boolean | |
| Tree | internal-lease-ipsec | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicited-release boolean
| Synopsis | Apply lease hold timer for solicited releases | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-hold additional-scenarios solicited-release boolean | |
| Tree | solicited-release | |
Description | This command enables the server to hold up a lease even for a solicited release, for example, when the server receives a normal DHCP release message. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
time number
| Synopsis | Lease hold time | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-hold time number | |
| Tree | time | |
| Range | 1 to 631152000 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-query boolean
| Synopsis | Handle and reply to lease query messages | |
| Context | configure service vprn string dhcp-server dhcpv6 string lease-query boolean | |
| Tree | lease-query | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool [pool-name] string
[pool-name] string
delegated-prefix
| Synopsis | Enter the delegated-prefix context | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string delegated-prefix | |
| Tree | delegated-prefix | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
length number
| Synopsis | Prefix length for pool if unspecified by client | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string delegated-prefix length number | |
| Tree | length | |
| Range | 48 to 127 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum number
| Synopsis | Maximum delegated prefix length for this pool | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string delegated-prefix maximum number | |
| Tree | maximum | |
| Range | 48 to 127 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
minimum number
| Synopsis | Minimum delegated prefix length for this pool | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string delegated-prefix minimum number | |
| Tree | minimum | |
| Range | 48 to 127 | |
| Default | 48 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
exclude-prefix [ipv6-prefix] string
| Synopsis | Add a list entry for exclude-prefix | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string exclude-prefix string | |
| Tree | exclude-prefix | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-prefix] string
| Synopsis | IPv6 prefix to be excluded from available pool prefixes | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string exclude-prefix string | |
| Tree | exclude-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
admin-state keyword
| Synopsis | Administrative state of the failover mechanism | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-mclt-on-takeover boolean
| Synopsis | Ignore maximum client lead during takeover from partner | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover ignore-mclt-on-takeover boolean | |
| Tree | ignore-mclt-on-takeover | |
Description | When configured to true, the remote IP address range can be taken over immediately when the intercommunication link enters the PARTNER-DOWN state, without having to wait for the MCLT to expire. When configured to false, the DHCP lease time for new clients is restricted to the MCLT during a failure. For existing clients, the lease time is gradually reduced over time to the MCLT by consecutive DHCP renewals. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-client-lead-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum time that DHCP server can extend client's lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover maximum-client-lead-time number | |
| Tree | maximum-client-lead-time | |
Description | This command configures the maximum client lead time (MCLT), which is the maximum time that a DHCP server can extend the client's lease time beyond the lease time currently known by the DHCP partner node. In dual-homed environments, the initial lease time for all DHCP clients is restricted to the MCLT by default. Consecutive DHCP renewals can extend the lease time beyond the MCLT. | |
| Range | 600 to 86399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
partner-down-delay number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Delay to prevent lease duplication during link failure | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover partner-down-delay number | |
| Tree | partner-down-delay | |
Description | This command configures the interval before a failed intercommunication link transitions from the COMM-INT state to the PARTNER-DOWN state. This delay prevents IP lease duplication during link failure by not allowing new IP addresses to be assigned from the remote IP address range. This timer is intended to provide the operator with enough time to remedy the failed situation and avoid duplication of IP addresses and prefixes during the failure. | |
| Range | 0 to 86399 | |
| Units | seconds | |
| Default | 86399 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
peer [address] reference
[address] reference
| Synopsis | IP address of the failover peer | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sync-tag string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag that identifies synchronizing server or pool pairs | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover peer reference sync-tag string | |
| Tree | sync-tag | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
startup-wait-time number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time between initialization and assuming active role | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string failover startup-wait-time number | |
| Tree | startup-wait-time | |
Description | This command configures a delay that avoids transient issues during the initialization process. During startup wait time, each failover peer waits after the initialization process before assuming the active role for the prefix designated as local or remote. | |
| Range | 60 to 3600 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
options
option [number] (number | keyword)
[number] (number | keyword)
| Synopsis | DHCP option to send as identification string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) | |
| Tree | option | |
| Range | 1 to 65535 | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DHCP option specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
domain-string string
| Synopsis | DHCP option specified as a domain name | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) domain-string string | |
| Tree | domain-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duration number
| Synopsis | DHCP option specified as time | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) duration number | |
| Tree | duration | |
| Range | 10 to 315446399 | |
| Units | seconds | |
|
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
empty
| Synopsis | Empty DHCP option | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) empty | |
| Tree | empty | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DHCP option specified as hexadecimal string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 256 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6-address string
| Synopsis | DHCP option specified as a list of IPv6 addresses | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string options option (number | keyword) ipv6-address string | |
| Tree | ipv6-address | |
| Max. Instances | 4 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix [ipv6-prefix] string
[ipv6-prefix] string
drain boolean
failover-control-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Failover control type for this range | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string failover-control-type keyword | |
| Tree | failover-control-type | |
| Options | ||
| Default | local | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
options
option [number] (number | keyword)
[number] (number | keyword)
| Synopsis | DHCP option to send as identification string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) | |
| Tree | option | |
| Range | 1 to 65535 | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DHCP option specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
domain-string string
| Synopsis | DHCP option specified as a domain name | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) domain-string string | |
| Tree | domain-string | |
| String Length | 1 to 127 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duration number
| Synopsis | DHCP option specified as time | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) duration number | |
| Tree | duration | |
| Range | 10 to 315446399 | |
| Units | seconds | |
|
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
empty
| Synopsis | Empty DHCP option | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) empty | |
| Tree | empty | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DHCP option specified as hexadecimal string | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 256 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6-address string
| Synopsis | DHCP option specified as a list of IPv6 addresses | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string options option (number | keyword) ipv6-address string | |
| Tree | ipv6-address | |
| Max. Instances | 4 | |
Notes | The following elements are part of a mandatory choice: ascii-string, domain-string, duration, empty, hex-string, or ipv6-address. This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime number
| Synopsis | Time this lease remains preferred | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string preferred-lifetime number | |
| Tree | preferred-lifetime | |
Description | This command configures the preferred lifetime of the IPv6 lease address or prefix. When the preferred lifetime expires, any derived addresses are deprecated. The preferred lifetime must be less than or equal to the valid lifetime. Each address or prefix assigned to the client has associated preferred and valid lifetimes specified by the address assignment authority (such as the DHCP server, RADIUS, or ESM). To request an extension of the lifetimes assigned to an address, the client sends a renew message to the addressing authority. The authority sends a reply message to the client with the new lifetimes, allowing the client to continue to use the address/prefix without interruption. The lifetimes are transmitted from the addressing authority to the client in the identity association (IA) option at the top level of the message (not the address or prefix level). | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-length-threshold [prefix-length] number
| Synopsis | Enter the prefix-length-threshold list instance | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-length-threshold number | |
| Tree | prefix-length-threshold | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix-length] number
| Synopsis | Delegated prefix length for pool thresholds | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-length-threshold number | |
| Tree | prefix-length-threshold | |
| Range | 1 to 128 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
absolute number
| Synopsis | Minimum number of free prefixes for this prefix length | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-length-threshold number absolute number | |
| Tree | absolute | |
| Range | 1 to 4294967295 | |
Notes | The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
event-when-depleted boolean
| Synopsis | Generate a notification when this pool is depleted | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-length-threshold number event-when-depleted boolean | |
| Tree | event-when-depleted | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
percent number
| Synopsis | Minimum percentage of free prefixes for prefix length | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-length-threshold number percent number | |
| Tree | percent | |
| Range | 1 to 100 | |
Notes | The following elements are part of a choice: absolute or percent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-type
| Synopsis | Enter the prefix-type context | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-type | |
| Tree | prefix-type | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pd boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Allocate IA-PD prefixes from this prefix pool | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-type pd boolean | |
| Tree | pd | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wan-host boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Allocate IA-NA or SLAAC prefixes from this prefix pool | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string prefix-type wan-host boolean | |
| Tree | wan-host | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
rebind-time number
| Synopsis | Rebind time for the lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string rebind-time number | |
| Tree | rebind-time | |
Description | This command configures the rebind time, known as T2, at which the client contacts the addressing authority to extend the lifetimes of its leases. The IP addressing authority (such as the DHCP server, RADIUS, or ESM) controls the time for extending lifetimes on assigned addresses/prefixes through the T1 and T2 parameters assigned to an identity association (IA). At renew time, T1, the client initiates a renew or reply message exchange to extend the lifetimes of any addresses in the IA. The client includes an IA option with all addresses or prefixes currently assigned to the IA in its renew message. Recommended values for T1 and T2 are 0.5 and 0.8 times the shortest preferred lifetime of the addresses or prefixes in the IA that the addressing authority is willing to extend, respectively. The configured rebind timer value should always be less than or equal to the rebind timer. The T1 and T2 values are carried in the IPV6 address option in the IA. | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-time number
| Synopsis | Renew time for the lease | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string renew-time number | |
| Tree | renew-time | |
Description | This command configures the renew time, known as T1, at which the client makes a transition to the lease-renewal state. The IP addressing authority (such as the DHCP server, RADIUS, or ESM) controls the time for extending lifetimes on assigned addresses/prefixes through the T1 and T2 parameters assigned to an identity association (IA). At renew time, T1, the client initiates a renew/reply message exchange to extend the lifetimes of any addresses in the IA. The client includes an IA option with all addresses/prefixes currently assigned to the IA in its renew message. Recommended values for T1 and T2 are 0.5 and 0.8 times the shortest preferred lifetime of the addresses or prefixes in the IA that the addressing authority is willing to extend, respectively. The configured renew timer value should always be shorter than or equal to the rebind timer. The T1 and T2 values are carried in the IPV6 address option in the IA. | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | Time for the lease to remain valid | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix string valid-lifetime number | |
| Tree | valid-lifetime | |
Description | This command configures a valid lifetime for a DHCPv6 lease address or prefix. The valid lifetime is the length of time an address and prefix remains in the valid state. The valid lifetime must be greater than or equal to the preferred lifetime. When the valid lifetime expires, the address and prefix becomes invalid and must not be used in communications. RFC 2461 recommends a default value of 30 days. Each address and prefix assigned to the client has associated preferred and valid lifetimes specified by the address assignment authority (such as the DHCP server, RADIUS, or ESM). To request an extension of the lifetimes assigned to an address, the client sends a renew message to the addressing authority. The authority sends a reply message to the client with the new lifetimes, allowing the client to continue to use the address and prefix without interruption. The lifetimes are transmitted from the addressing authority to the client in the identity association (IA) option at the top level of the message (not the address or prefix level). | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-length-threshold [prefix-length] number
| Synopsis | Enter the prefix-length-threshold list instance | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix-length-threshold number | |
| Tree | prefix-length-threshold | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix-length] number
| Synopsis | Delegated prefix length for pool thresholds | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix-length-threshold number | |
| Tree | prefix-length-threshold | |
| Range | 1 to 128 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
event-when-depleted boolean
| Synopsis | Generate a notification when this pool is depleted | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix-length-threshold number event-when-depleted boolean | |
| Tree | event-when-depleted | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
minimum-free-percent number
| Synopsis | Percentage of free prefixes for this prefix length | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool string prefix-length-threshold number minimum-free-percent number | |
| Tree | minimum-free-percent | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool-selection
| Synopsis | Enter the pool-selection context | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool-selection | |
| Tree | pool-selection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-link-address
| Synopsis | Enable the use-link-address context | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool-selection use-link-address | |
| Tree | use-link-address | |
Description | This command configures the local pool selection for DHCPv6 address or prefix assignment to use the link address. When configured, the selected pool contains a prefix covering the link address. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | Scope of the IP address selection | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool-selection use-link-address scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subnet | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-pool-from-client
| Synopsis | Enable the use-pool-from-client context | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool-selection use-pool-from-client | |
| Tree | use-pool-from-client | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
delimiter string
| Synopsis | Delimiter to combine primary and secondary pool names | |
| Context | configure service vprn string dhcp-server dhcpv6 string pool-selection use-pool-from-client delimiter string | |
| Tree | delimiter | |
Description | This command configures a single ASCII character that separates the pool names in DHCP vendor-specific option 82, which identifies the address pool to be used for this client. | |
| String Length | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server-id
duid-enterprise
| Synopsis | Enter the duid-enterprise context | |
| Context | configure service vprn string dhcp-server dhcpv6 string server-id duid-enterprise | |
| Tree | duid-enterprise | |
Notes | The following elements are part of a choice: duid-enterprise or duid-link-local. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | DUID enterprise server ID specified as an ASCII string | |
| Context | configure service vprn string dhcp-server dhcpv6 string server-id duid-enterprise ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 58 | |
Notes | The following elements are part of a choice: ascii-string or hex-string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hex-string string
| Synopsis | DUID enterprise server ID specified as a hex string | |
| Context | configure service vprn string dhcp-server dhcpv6 string server-id duid-enterprise hex-string string | |
| Tree | hex-string | |
| String Length | 1 to 118 | |
Notes | The following elements are part of a choice: ascii-string or hex-string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-link-local
| Synopsis | Derive DUID server ID from a system link-layer address | |
| Context | configure service vprn string dhcp-server dhcpv6 string server-id duid-link-local | |
| Tree | duid-link-local | |
Notes | The following elements are part of a choice: duid-enterprise or duid-link-local. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-identification keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | User identification method for the DHCP server | |
| Context | configure service vprn string dhcp-server dhcpv6 string user-identification keyword | |
| Tree | user-identification | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
dns
admin-state keyword
| Synopsis | Administrative state of DNS | |
| Context | configure service vprn string dns admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-domain string
| Synopsis | Domain name added in DNS retries | |
| Context | configure service vprn string dns default-domain string | |
| Tree | default-domain | |
Description | This command configures the DNS domain name to be added in DNS retries when a DNS query is not replied or an empty DNS reply is received. The name can contain only alphabetical characters (A-Z), numeric characters (0-9), the minus sign (-), and the period (.). | |
| String Length | 1 to 255 | |
| Introduced | 20.2.R1 | |
Platforms | All |
ipv4-source-address (keyword | ipv4-unicast-address)
| Synopsis | Source address to contact an IPv4 DNS server | |
| Context | configure service vprn string dns ipv4-source-address (keyword | ipv4-unicast-address) | |
| Tree | ipv4-source-address | |
| Options | ||
| Default | use-interface-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-source-address (keyword | ipv6-unicast-address)
| Synopsis | Source address to contact an IPv6 DNS server | |
| Context | configure service vprn string dns ipv6-source-address (keyword | ipv6-unicast-address) | |
| Tree | ipv6-source-address | |
| Options | ||
| Default | use-interface-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
server (ipv4-address-no-zone | ipv6-address-no-zone)
ecmp number
| Synopsis | Maximum equal-cost routes for routing table instance | |
| Context | configure service vprn string ecmp number | |
| Tree | ecmp | |
Description | This command configures ECMP and defines the number of routes for path sharing. ECMP can be used only for routes learned with the same preference and the same protocol. If available ECMP routes at the best preference exceed the maximum ECMP routes allowed, the system selects the route using the following criteria:
| |
| Range | 1 to 64 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ecmp-unequal-cost boolean
| Synopsis | Enable ECMP unequal cost capability | |
| Context | configure service vprn string ecmp-unequal-cost boolean | |
| Tree | ecmp-unequal-cost | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
entropy-label boolean
| Synopsis | Use entropy label | |
| Context | configure service vprn string entropy-label boolean | |
| Tree | entropy-label | |
Description | When configured to true, this command enables the use of entropy labels. The entropy label and indicator (EL/ELI) are inserted on relevant packets. Applicable packets are those for which at least one LSP in the stack at the far end has advertised the entropy-label capability. These LSPs are in LDP or RSVP tunnels used by an IGP or BGP shortcut. If the tunnel is of type RSVP, the entropy-label capability must also be enabled under the configure router mpls or configure router mpls lsp context. This command also results in other traffic that is forwarded over an LDP or RSVP LSP for which this router is the LER, and for which there is no explicit service endpoint on this router, to have the EL/ELI enabled, subject to the LSP far-end advertising entropy-label-capability. An example of such traffic includes packets arriving on a stitched LDP LSP forwarded over an RSVP LSP. The entropy label and the hash label features are mutually exclusive. The entropy label cannot be configured on a spoke SDP or service where the hash label feature has already been configured. When configured to false, the use of entropy labels is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
eth-cfm
export-inactive-bgp boolean
| Synopsis | Export preferred BGP route even if inactive | |
| Context | configure service vprn string export-inactive-bgp boolean | |
| Tree | export-inactive-bgp | |
Description | When configured to true, the preferred BGP route learned by a VPRN is exported as the VPN-IP route even if it is inactive in the route table because a preferred BGP VPRN route from another PE is present. This overrides the default state in which the VPRN cannot export an inactive BGP route. For the BGP route to be exported, the VRF export policy must accept it. This command applies to both MPLS VPN and SRv6 VPN routes. In SRv6 VPN routes the advertised instruction is an End.DT, while in MPLS VPN routes the advertised label is a per-next-hop label.This “best-external” type of route advertisement is useful in active/standby multi-homing scenarios because it ensures that all PEs know about the backup path provided by the standby PE. When configured to false, the preferred BGP route is not exported if it is inactive. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export-inactive-bgp-enhanced boolean
| Synopsis | Export best BGP route when better non-BGP route present | |
| Context | configure service vprn string export-inactive-bgp-enhanced boolean | |
| Tree | export-inactive-bgp-enhanced | |
Description | When configured to true, the router allows a BGP route that is inactive (because a better non-BGP route for the same prefix is present) to be exportable as a VPN-IP route. A BGP route learned from a VPRN BGP peer is exportable as a VPN-IP route, only if it is the best route for the prefix and is installed in the route table of the VPRN. If the export-inactive-bgp command is true in the VPRN configuration, this rule is relaxed, and the best inactive VPRN BGP route is exportable as a VPN-IP route, provided that the active installed route for the prefix is an imported VPN-IP route. The rule described in the preceding paragraph can be relaxed even further by configuring this command to true. When this command is true, the best inactive VPRN BGP route (best amongst all routes received from all CEs) is exportable as a VPN-IP route, regardless of the route type of the active installed route. The configuration of this command overrides the export-inactive-bgp command. If this command is true, the export-inactive-bgp command does not need to be true. When configured to false, the router disables allowing an inactive BGP route in the presence of a better non-BGP route to be exportable as a VPN-IP route. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | All |
fib-priority keyword
| Synopsis | FIB priority for VPRN BGP routes | |
| Context | configure service vprn string fib-priority keyword | |
| Tree | fib-priority | |
| Options | ||
| Default | standard | |
| Introduced | 16.0.R1 | |
Platforms | All |
firewall
domain [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the firewall domain | |
| Context | configure service vprn string firewall domain string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcpv6-server
| Synopsis | Enter the dhcpv6-server context | |
| Context | configure service vprn string firewall domain string dhcpv6-server | |
| Tree | dhcpv6-server | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DHCPv6 server name | |
| Context | configure service vprn string firewall domain string dhcpv6-server name string | |
| Tree | name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router name | |
| Context | configure service vprn string firewall domain string dhcpv6-server router-instance string | |
| Tree | router-instance | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
nat-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT group for this domain | |
| Context | configure service vprn string firewall domain string nat-group reference | |
| Tree | nat-group | |
Reference | ||
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix [ip-prefix] string
[ip-prefix] string
| Synopsis | IP prefix and prefix length for the domain firewall | |
| Context | configure service vprn string firewall domain string prefix string | |
| Tree | prefix | |
Description | This command configures a prefix for which firewall functionality applies within the domain. Prefixes cannot be shared or duplicated across multiple domains in the same routing context. A domain can contain multiple prefixes. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string firewall domain string prefix string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | WLAN GW group used for NAT | |
| Context | configure service vprn string firewall domain string wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
flowspec
filter-cam-type keyword
| Synopsis | Filter policy type for FlowSpec embedding | |
| Context | configure service vprn string flowspec filter-cam-type keyword | |
| Tree | filter-cam-type | |
Description | This command specifies the filter type that is required to embed FlowSpec entries. The filter type defines the match criteria that are available in the filter policy. | |
| Options | ||
| Default | normal | |
| Introduced | 20.7.R1 | |
Platforms |
All |
ip-filter-max-size number
| Synopsis | Maximum number of flowspec rule entries in IPv4 filter | |
| Context | configure service vprn string flowspec ip-filter-max-size number | |
| Tree | ip-filter-max-size | |
Description | This command configures the maximum number of IPv4 flowspec routes, or rules, that can be entered in the auto-created embedded filter, fSpec-X. Flowspec filter entries embedded in a filter policy in this routing instance will use filter entries from the range between the embedding offset and (offset + ip-filter-max-size – 1). The sum of the maximum-size value and the highest offset in any IPv4 filter that embeds IPv4 flowspec rules from this routing instance (excluding filters that embed at offset 262143) must not exceed 262143. The maximum size can be adjusted up or down at any time. If the current number of IPv4 flowspec rules is greater than the new maximum, the extra rules are removed immediately but retained in the BGP RIB. If the limit is increased, new rules are programmed only as they are received in new BGP updates. | |
| Range | 0 to 262143 | |
| Default | 512 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ipv6-filter-max-size number
| Synopsis | Maximum number of flowspec rule entries in IPv6 filter | |
| Context | configure service vprn string flowspec ipv6-filter-max-size number | |
| Tree | ipv6-filter-max-size | |
Description | This command configures the maximum number of IPv6 flowspec routes or rules that can be embedded into an ingress IPv6 filter policy for a specified routing instance. Flowspec filter entries embedded in a filter policy in this routing instance will use filter entries from the range between the embedding offset and (offset + ip-filter-max-size – 1). The sum of the maximum-size value and the highest offset in any IPv6 filter that embeds IPv6 flowspec rules from this routing instance (excluding filters that embed at offset 262143) must not exceed 262143. The maximum size can be adjusted up or down at any time. If the current number of IPv6 flowspec rules is greater than the new maximum, the extra rules are removed immediately but retained in the BGP RIB. If the limit is increased, new rules are programmed only as they are received in new BGP updates. | |
| Range | 0 to 262143 | |
| Default | 512 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
grt-leaking
| Synopsis | Enter the grt-leaking context | |
| Context | configure service vprn string grt-leaking | |
| Tree | grt-leaking | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-local-management boolean
| Synopsis | Enable management traffic | |
| Context | configure service vprn string grt-leaking allow-local-management boolean | |
| Tree | allow-local-management | |
Description | When configured to true, this command enables the support of specific management protocols over VPRN interfaces that terminate on Base routing context IPv4 and IPv6 interface addresses, including Base loopback and system addresses. This command does not control the support for management protocols terminating on VPRN interfaces directly. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export-grt
| Synopsis | Enter the export-grt context | |
| Context | configure service vprn string grt-leaking export-grt | |
| Tree | export-grt | |
| Introduced | 16.0.R1 | |
Platforms | All |
policy-name (policy-expr-string | string)
| Synopsis | Route policy name or policy logical expression | |
| Context | configure service vprn string grt-leaking export-grt policy-name (policy-expr-string | string) | |
| Tree | policy-name | |
| String Length | 1 to 255 | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
export-limit number
| Synopsis | Maximum number of routes exported from VRF to GRT | |
| Context | configure service vprn string grt-leaking export-limit number | |
| Tree | export-limit | |
| Range | 0 to 1000 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
export-v6-limit number
| Synopsis | Maximum number of IPv6 routes exported from VPRN to GRT | |
| Context | configure service vprn string grt-leaking export-v6-limit number | |
| Tree | export-v6-limit | |
| Range | 0 to 1000 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
grt-lookup boolean
| Synopsis | Enable global route table lookup | |
| Context | configure service vprn string grt-leaking grt-lookup boolean | |
| Tree | grt-lookup | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-grt
| Synopsis | Enter the import-grt context | |
| Context | configure service vprn string grt-leaking import-grt | |
| Tree | import-grt | |
| Introduced | 16.0.R4 | |
Platforms | All |
policy-name (policy-expr-string | string)
| Synopsis | Route policy name or policy logical expression | |
| Context | configure service vprn string grt-leaking import-grt policy-name (policy-expr-string | string) | |
| Tree | policy-name | |
| String Length | 1 to 255 | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
gsmp
admin-state keyword
| Synopsis | Administrative state of GSMP | |
| Context | configure service vprn string gsmp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
group [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the GSMP group | |
| Context | configure service vprn string gsmp group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
ancp
dynamic-topology-discovery boolean
| Synopsis | Enable the ANCP dynamic topology discovery capability | |
| Context | configure service vprn string gsmp group string ancp dynamic-topology-discovery boolean | |
| Tree | dynamic-topology-discovery | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
oam boolean
description string
| Synopsis | Text description | |
| Context | configure service vprn string gsmp group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-multiplier number
| Synopsis | Hold-multiplier for the GSMP connections in this group | |
| Context | configure service vprn string gsmp group string hold-multiplier number | |
| Tree | hold-multiplier | |
| Range | 1 to 100 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
idle-filter boolean
| Synopsis | Filter ANCP messages from IDLE DSL lines | |
| Context | configure service vprn string gsmp group string idle-filter boolean | |
| Tree | idle-filter | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
keepalive number
neighbor [remote-address] string
[remote-address] string
admin-state keyword
| Synopsis | Administrative state of the GSMP neighbor | |
| Context | configure service vprn string gsmp group string neighbor string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string gsmp group string neighbor string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Restrict connections to this local address only within the service running ANCP | |
| Context | configure service vprn string gsmp group string neighbor string local-address string | |
| Tree | local-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
priority-marking
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the priority-marking context | |
| Context | configure service vprn string gsmp group string neighbor string priority-marking | |
| Tree | priority-marking | |
| Introduced | 16.0.R1 | |
Platforms | All | |
dscp keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DSCP that is used while remarking the in profile packets | |
| Context | configure service vprn string gsmp group string neighbor string priority-marking dscp keyword | |
| Tree | dscp | |
| Options | ||
Notes |
The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
prec number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Precedence priority marking | |
| Context | configure service vprn string gsmp group string neighbor string priority-marking prec number | |
| Tree | prec | |
| Range | 0 to 7 | |
Notes | The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
persistency boolean
| Synopsis | Store DSL line information when the GSMP connection terminates | |
| Context | configure service vprn string gsmp group string persistency boolean | |
| Tree | persistency | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
gtp
s11
interface [interface-name] reference
[interface-name] reference
apn-policy reference
| Synopsis | Access Point Name (APN) policy for the S11 interface | |
| Context | configure service vprn string gtp s11 interface reference apn-policy reference | |
| Tree | apn-policy | |
Reference | configure subscriber-mgmt gtp apn-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
peer-profile-map
| Synopsis | Enter the peer-profile-map context | |
| Context | configure service vprn string gtp s11 peer-profile-map | |
| Tree | peer-profile-map | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix [peer-prefix] (ipv4-prefix | ipv6-prefix)
[peer-prefix] (ipv4-prefix | ipv6-prefix)
peer-profile reference
| Synopsis | Peer profile used for peers in this prefix | |
| Context | configure service vprn string gtp s11 peer-profile-map prefix (ipv4-prefix | ipv6-prefix) peer-profile reference | |
| Tree | peer-profile | |
Reference | configure subscriber-mgmt gtp peer-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
upf-data-endpoint
| Synopsis | Enable the upf-data-endpoint context | |
| Context | configure service vprn string gtp upf-data-endpoint | |
| Tree | upf-data-endpoint | |
Description | Commands in this context configure a GTP-U service endpoint used by BNG CUPS FWA sessions. | |
| Introduced | 21.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fpe reference
| Synopsis | FPE used to encapsulate and decapsulate GTP-U traffic | |
| Context | configure service vprn string gtp upf-data-endpoint fpe reference | |
| Tree | fpe | |
Reference | configure fwd-path-ext fpe number | |
Notes | This element is mandatory. | |
| Introduced | 21.5.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface reference
uplink
apn string
pdn-type keyword
peer-profile-map
| Synopsis | Enter the peer-profile-map context | |
| Context | configure service vprn string gtp uplink peer-profile-map | |
| Tree | peer-profile-map | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix [peer-prefix] (ipv4-prefix | ipv6-prefix)
[peer-prefix] (ipv4-prefix | ipv6-prefix)
peer-profile reference
| Synopsis | Peer profile name | |
| Context | configure service vprn string gtp uplink peer-profile-map prefix (ipv4-prefix | ipv6-prefix) peer-profile reference | |
| Tree | peer-profile | |
Reference | configure subscriber-mgmt gtp peer-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hash-label boolean
| Synopsis | Include hash label | |
| Context | configure service vprn string hash-label boolean | |
| Tree | hash-label | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
igmp
admin-state keyword
| Synopsis | Administrative state of IGMP | |
| Context | configure service vprn string igmp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
forwarding-group-interface forwarding-service string group-interface-name reference
| Synopsis | Enter the forwarding-group-interface list instance | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
forwarding-service string
| Synopsis | Forwarding service for a subscriber interface in a retailer context | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
| String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-interface-name reference
| Synopsis | Group interface name | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
Reference | configure service vprn string subscriber-interface string group-interface string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IGMP | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference import-policy reference | |
| Tree | import-policy | |
Description | This command configures the IGMP import policy, or filter, for an interface subscriber or a group interface. An IGMP filter is also known as a black or white list, and it is defined as a router policy option. When redirection is applied, only the import policy from the subscriber is in effect. The import policy under the group interface is applicable only for IGMP states received directly on the SAP (AN in IGMP proxy mode). | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mcac
| Synopsis | Enter the mcac context | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac | |
| Tree | mcac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bandwidth
| Synopsis | Enter the bandwidth context | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth | |
| Tree | bandwidth | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mandatory (number | keyword)
| Synopsis | Pre-reserved bandwidth for all mandatory channels | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth mandatory (number | keyword) | |
| Tree | mandatory | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
total (number | keyword)
| Synopsis | Maximum allowed bandwidth | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth total (number | keyword) | |
| Tree | total | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-source-address string
| Synopsis | Source address for IGMP queries | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference query-source-address string | |
| Tree | query-source-address | |
Description | This command configures the query source IP address for the group interface. This IP address overrides the source IP address configured at the router level. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-hosts-only boolean
| Synopsis | Allow IGMP traffic from known hosts only | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference sub-hosts-only boolean | |
| Tree | sub-hosts-only | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subnet-check boolean
| Synopsis | Allow subnet checking | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference subnet-check boolean | |
| Tree | subnet-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
version keyword
| Synopsis | IGMP protocol version | |
| Context | configure service vprn string igmp forwarding-group-interface forwarding-service string group-interface-name reference version keyword | |
| Tree | version | |
| Options | ||
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-if-query-source-address string
| Synopsis | Default query-source address for all group interfaces | |
| Context | configure service vprn string igmp group-if-query-source-address string | |
| Tree | group-if-query-source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-interface [group-interface-name] reference
| Synopsis | Enter the group-interface list instance | |
| Context | configure service vprn string igmp group-interface reference | |
| Tree | group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[group-interface-name] reference
| Synopsis | Group interface name | |
| Context | configure service vprn string igmp group-interface reference | |
| Tree | group-interface | |
Reference | configure service vprn string subscriber-interface string group-interface string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IGMP | |
| Context | configure service vprn string igmp group-interface reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vprn string igmp group-interface reference import-policy reference | |
| Tree | import-policy | |
Description | This command configures the IGMP import policy, or filter, for an interface subscriber or a group interface. An IGMP filter is also known as a black or white list, and it is defined as a router policy option. When redirection is applied, only the import policy from the subscriber is in effect. The import policy under the group interface is applicable only for IGMP states received directly on the SAP (AN in IGMP proxy mode). | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string igmp group-interface reference maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string igmp group-interface reference maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string igmp group-interface reference maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mcac
bandwidth
mandatory (number | keyword)
| Synopsis | Pre-reserved bandwidth for all mandatory channels | |
| Context | configure service vprn string igmp group-interface reference mcac bandwidth mandatory (number | keyword) | |
| Tree | mandatory | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string igmp group-interface reference mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string igmp group-interface reference mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string igmp group-interface reference query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string igmp group-interface reference query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string igmp group-interface reference query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-source-address string
| Synopsis | Source address for IGMP queries | |
| Context | configure service vprn string igmp group-interface reference query-source-address string | |
| Tree | query-source-address | |
Description | This command configures the query source IP address for the group interface. This IP address overrides the source IP address configured at the router level. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string igmp group-interface reference router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-hosts-only boolean
| Synopsis | Allow IGMP traffic from known hosts only | |
| Context | configure service vprn string igmp group-interface reference sub-hosts-only boolean | |
| Tree | sub-hosts-only | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subnet-check boolean
| Synopsis | Allow subnet checking | |
| Context | configure service vprn string igmp group-interface reference subnet-check boolean | |
| Tree | subnet-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
version keyword
interface [ip-interface-name] string
[ip-interface-name] string
admin-state keyword
| Synopsis | Administrative state of IGMP | |
| Context | configure service vprn string igmp interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vprn string igmp interface string import-policy reference | |
| Tree | import-policy | |
Description | This command configures the IGMP import policy, or filter, for an interface subscriber or a group interface. An IGMP filter is also known as a black or white list, and it is defined as a router policy option. When redirection is applied, only the import policy from the subscriber is in effect. The import policy under the group interface is applicable only for IGMP states received directly on the SAP (AN in IGMP proxy mode). | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string igmp interface string maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string igmp interface string maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string igmp interface string maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string igmp interface string mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
mc-constraints
| Synopsis | Enter the mc-constraints context | |
| Context | configure service vprn string igmp interface string mcac mc-constraints | |
| Tree | mc-constraints | |
| Introduced | 16.0.R1 | |
Platforms | All |
level [level-id] number
[level-id] number
bandwidth number
number-down [number-lag-port-down] number
| Synopsis | Enter the number-down list instance | |
| Context | configure service vprn string igmp interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Introduced | 16.0.R1 | |
Platforms | All |
[number-lag-port-down] number
| Synopsis | Number of ports that are down in this LAG link | |
| Context | configure service vprn string igmp interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Range | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
level number
| Synopsis | Level ID to associate with number of down LAG ports | |
| Context | configure service vprn string igmp interface string mcac mc-constraints number-down number level number | |
| Tree | level | |
Description | This command specifies the bandwidth for a given level. Level 1 has the highest priority and level 8 has the lowest priority. | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-lag-port-weight boolean
| Synopsis | Use LAG port weight in calculating MCAC constraints | |
| Context | configure service vprn string igmp interface string mcac mc-constraints use-lag-port-weight boolean | |
| Tree | use-lag-port-weight | |
Description | When configured to true, port weight is used when determining available bandwidth per level when LAG ports go down or come up. This command is required for proper operation on mixed port-speed LAGs and can also be used for unmixed port-speed LAGs. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string igmp interface string mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string igmp interface string query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string igmp interface string query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string igmp interface string query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
redundant-mcast boolean
| Synopsis | Use interface as a redundant-pair member for multicast | |
| Context | configure service vprn string igmp interface string redundant-mcast boolean | |
| Tree | redundant-mcast | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string igmp interface string router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ssm-translate
| Synopsis | Enter the ssm-translate context | |
| Context | configure service vprn string igmp interface string ssm-translate | |
| Tree | ssm-translate | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range start string end string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string igmp interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | Lower bound of the IP address group range | |
| Context | configure service vprn string igmp interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | Upper bound of the IP address group range | |
| Context | configure service vprn string igmp interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
| Synopsis | Add a list entry for source | |
| Context | configure service vprn string igmp interface string ssm-translate group-range start string end string source string | |
| Tree | source | |
| Min. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[source-address] string
| Synopsis | Source IP address of multicast channel sending data | |
| Context | configure service vprn string igmp interface string ssm-translate group-range start string end string source string | |
| Tree | source | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R2 | |
Platforms | All |
static
group [group-address] string
[group-address] string
| Synopsis | Group address of static IGMP multicast channel | |
| Context | configure service vprn string igmp interface string static group string | |
| Tree | group | |
Description | This command configures an address that receives data on an interface. The IP address must be unique for each static group. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
group-range start string end string step string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string igmp interface string static group-range start string end string step string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | IP address for the start of the static group range | |
| Context | configure service vprn string igmp interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | IP address for the end of the static group range | |
| Context | configure service vprn string igmp interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
step string
| Synopsis | Step interval in the group-range address | |
| Context | configure service vprn string igmp interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
subnet-check boolean
| Synopsis | Allow subnet checking | |
| Context | configure service vprn string igmp interface string subnet-check boolean | |
| Tree | subnet-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
version keyword
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string igmp query-interval number | |
| Tree | query-interval | |
Description | This command configures the timing of the host-query messages that solicit group membership information. The messages are sent to the all-systems multicast group address, 224.0.0.1. | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string igmp query-last-member-interval number | |
| Tree | query-last-member-interval | |
Description | This command configures the timing of the query-message interval, defining the interval for leave-group messages among others. The lower the interval that is configured, the faster the detection of the loss of the last member of a group. | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string igmp query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vprn string igmp robust-count number | |
| Tree | robust-count | |
Description | This command configures the level of expected packet loss on a subnet. If a subnet anticipates losses, this value can be increased. | |
| Range | 2 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ssm-translate
| Synopsis | Enter the ssm-translate context | |
| Context | configure service vprn string igmp ssm-translate | |
| Tree | ssm-translate | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range start string end string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string igmp ssm-translate group-range start string end string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | Lower bound of the IP address group range | |
| Context | configure service vprn string igmp ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | Upper bound of the IP address group range | |
| Context | configure service vprn string igmp ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
| Synopsis | Add a list entry for source | |
| Context | configure service vprn string igmp ssm-translate group-range start string end string source string | |
| Tree | source | |
| Min. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[source-address] string
| Synopsis | Source IP address of multicast channel sending data | |
| Context | configure service vprn string igmp ssm-translate group-range start string end string source string | |
| Tree | source | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R2 | |
Platforms | All |
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service vprn string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IGMP host tracking | |
| Context | configure service vprn string igmp-host-tracking admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service vprn string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 260 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-nh-metric boolean
| Synopsis | Ignore next hop metric | |
| Context | configure service vprn string ignore-nh-metric boolean | |
| Tree | ignore-nh-metric | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
cflowd-parameters
| Synopsis | Enter the cflowd-parameters context | |
| Context | configure service vprn string interface string cflowd-parameters | |
| Tree | cflowd-parameters | |
| Introduced | 16.0.R1 | |
Platforms | All |
sampling [sampling-type] keyword
[sampling-type] keyword
| Synopsis | Traffic sampling type | |
| Context | configure service vprn string interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
Description | This command configures the type of traffic to be sampled on the associated IP interface. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
direction keyword
| Synopsis | Direction of traffic for cflowd sampling | |
| Context | configure service vprn string interface string cflowd-parameters sampling keyword direction keyword | |
| Tree | direction | |
Description | This command configures the direction in which sampling occurs on the associated IP interfaces. | |
| Options | ||
| Default | ingress-only | |
| Introduced | 16.0.R1 | |
Platforms | All |
sample-profile (keyword | number)
| Synopsis | Sample profile ID | |
| Context | configure service vprn string interface string cflowd-parameters sampling keyword sample-profile (keyword | number) | |
| Tree | sample-profile | |
Description | This command defines the sampling rate profile associated with this interface. | |
| Max. Range | 0 to 4294967295 | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms | All |
type keyword
| Synopsis | Type of cflowd analysis | |
| Context | configure service vprn string interface string cflowd-parameters sampling keyword type keyword | |
| Tree | type | |
Description | This command configures the cflowd sampling type on the associated IP interface. | |
| Options | ||
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpu-protection reference
| Synopsis | CPU protection policy | |
| Context | configure service vprn string interface string cpu-protection reference | |
| Tree | cpu-protection | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dynamic-tunnel-redundant-nexthop string
| Synopsis | Redundant next-hop address for the dynamic IPsec tunnel | |
| Context | configure service vprn string interface string dynamic-tunnel-redundant-nexthop string | |
| Tree | dynamic-tunnel-redundant-nexthop | |
Description | This command specifies the redundant next-hop address on a public or private IPsec interface (with public or private tunnel SAP) for a dynamic IPsec tunnel. The next-hop address is used by a standby node to shunt traffic to a master if it receives the address. The next-hop address is resolved in the routing table of a corresponding service. | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
ipv6
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string interface string hold-time ipv6 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string interface string hold-time ipv6 down init-only boolean | |
| Tree | init-only | |
Description | When configured to true, the system applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string interface string hold-time ipv6 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
if-attribute
| Synopsis | Enter the if-attribute context | |
| Context | configure service vprn string interface string if-attribute | |
| Tree | if-attribute | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-group reference
| Synopsis | Administrative group name for the interface | |
| Context | configure service vprn string interface string if-attribute admin-group reference | |
| Tree | admin-group | |
Reference | configure routing-options if-attribute admin-group string | |
| Max. Instances | 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
srlg-group [name] reference
| Synopsis | Add a list entry for srlg-group | |
| Context | configure service vprn string interface string if-attribute srlg-group reference | |
| Tree | srlg-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] reference
| Synopsis | SRLG name | |
| Context | configure service vprn string interface string if-attribute srlg-group reference | |
| Tree | srlg-group | |
Reference | configure routing-options if-attribute srlg-group string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
destination-class-lookup boolean
| Synopsis | Enable BGP destination class lookup | |
| Context | configure service vprn string interface string ingress destination-class-lookup boolean | |
| Tree | destination-class-lookup | |
Description | When configured to true, the router performs a destination class lookup. This command is supported on FP3-based cards and later and is used in combination with the destination-class match criterion for an IP filter policy to filter egress traffic based on BGP destination classes. When configured to false, destination class lookup is not enabled. | |
| Default | false | |
| Introduced | 20.7.R1 | |
|
Platforms | All |
policy-accounting reference
| Synopsis | Ingress policy accounting template name | |
| Context | configure service vprn string interface string ingress policy-accounting reference | |
| Tree | policy-accounting | |
Reference | configure routing-options policy-accounting policy-acct-template string | |
| Introduced | 19.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ingress-stats boolean
| Synopsis | Collect ingress statistics | |
| Context | configure service vprn string interface string ingress-stats boolean | |
| Tree | ingress-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ip-mtu number
ipsec
admin-state keyword
| Synopsis | Administrative state of IPsec secured interface | |
| Context | configure service vprn string interface string ipsec admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
ip-exception reference
| Synopsis | IP exception filter | |
| Context | configure service vprn string interface string ipsec ip-exception reference | |
| Tree | ip-exception | |
Description | This command configures the IP exception filter for the secured interface. All ingress traffic matching the specified filter bypasses IPsec processing. | |
Reference | configure filter ip-exception string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
ipsec-tunnel [name] string
| Synopsis | Enter the ipsec-tunnel list instance | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
Description | Commands in this context configure IPsec tunnels used to secure traffic forwarded over the interface. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
[name] string
| Synopsis | IPsec tunnel name | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec tunnel | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
bfd
bfd-designate boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate IPsec tunnel to carry BFD traffic | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string bfd bfd-designate boolean | |
| Tree | bfd-designate | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
bfd-liveness
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string bfd bfd-liveness | |
| Tree | bfd-liveness | |
Description | Commands in this context configure a BFD session to provide a heart-beat mechanism for a specified IPsec tunnel. There can be only one BFD session assigned to any given IPsec tunnel, but there can be multiple IPsec tunnels using the same BFD session. BFD controls the state of the association tunnel. If the BFD session goes down, the system brings down the associated non-designated IPsec tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
dest-ip string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address used for the BFD session | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string bfd bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interface string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface used by the BFD session | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string bfd bfd-liveness interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
service-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string bfd bfd-liveness service-name string | |
| Tree | service-name | |
Description | This command configures the name of the service where BFD traffic is forwarded to. | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
clear-df-bit boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Reset the DF bit to 0 in all payload IP packets | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string clear-df-bit boolean | |
| Tree | clear-df-bit | |
Description | When configured to true, the DF bit is set to 0 in all payload IP packets associated with the IPsec tunnel, before any potential fragmentation occurs. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
copy-traffic-class-upon-decapsulation boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable traffic class copy upon decapsulation | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string copy-traffic-class-upon-decapsulation boolean | |
| Tree | copy-traffic-class-upon-decapsulation | |
Description | When configured to true, the system copies the traffic class from the outer tunnel IP packet header to the payload IP packet header in the decapsulating direction (public to private). | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
encapsulated-ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum size of the encapsulated tunnel packet | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string encapsulated-ip-mtu number | |
| Tree | encapsulated-ip-mtu | |
Description | This command specifies the maximum size of the encapsulated tunnel packet to the IPsec tunnel, the IP tunnel, or the dynamic tunnels terminated on the IPsec Gateway. If the encapsulated IPv4 or IPv6 tunnel packet exceeds this value, the system fragments the packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
icmp-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp-generation context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp-generation | |
| Tree | icmp-generation | |
Description | Commands in this context configure settings for ICMPv4 message generation. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
frag-required
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the frag-required context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp-generation frag-required | |
| Tree | frag-required | |
Description | Commands in this context configure the attributes for sending generated ICMP Destination Unreachable "fragmentation needed and DF set" messages (type 3, code 4) back to the source, if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of sending ICMP messages | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp-generation frag-required admin-state keyword | |
| Tree | admin-state | |
Description | This command configures the administrative state of sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) messages to the source if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Options | ||
| Default | enable | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending ICMP messages | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp-generation frag-required interval number | |
| Tree | interval | |
Description | This command configures the interval for sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4). | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMP messages that can be sent | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp-generation frag-required message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
icmp6-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp6-generation context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp6-generation | |
| Tree | icmp6-generation | |
Description | Commands in this context configure settings for ICMPv6 message generation. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
packet-too-big
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the packet-too-big context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big | |
| Tree | packet-too-big | |
Description | Commands in this context configure the parameters to send ICMPv6 PTB (Packet Too Big) messages on the private side. The system sends PTB messages if a received IPv6 packet on the private side is greater than 1280 bytes and it exceeds the private MTU of the tunnel. The private MTU for the tunnel is configured via the configure router interface ipsec ipsec-tunnel ip-mtu command for the interface. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of Packet Too Big message sends | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending Packet Too Big messages | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big interval number | |
| Tree | interval | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMPv6 PTB messages that can be sent | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string icmp6-generation packet-too-big message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of PTB messages that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Private MTU of the IPsec tunnel | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string ip-mtu number | |
| Tree | ip-mtu | |
Description | This command specifies the private MTU of the IPsec tunnel. The private MTU is used to determine the need for fragmentation before encapsulation of the payload packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
key-exchange
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the key-exchange context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange | |
| Tree | key-exchange | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
dynamic
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the dynamic context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic | |
| Tree | dynamic | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
auto-establish boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Attempt to establish a phase 1 exchange automatically | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic auto-establish boolean | |
| Tree | auto-establish | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
cert
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the cert context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert | |
| Tree | cert | |
Description | Commands in this context configure the attributes of the dynamic keying certificate. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
cert-profile reference
| Synopsis | Certificate profile name | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert cert-profile reference | |
| Tree | cert-profile | |
Reference | configure ipsec cert-profile string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
status-verify
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the status-verify context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify | |
| Tree | status-verify | |
Description | Commands in this context configure attributes of Certificate Status Verification (CSV). | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
default-result keyword
| Synopsis | Default result for Certificate Status Verification | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify default-result keyword | |
| Tree | default-result | |
Description | This command specifies the default certificate revocation status result to use when all configured CSV methods fail to return a result. | |
| Options | ||
| Default | revoked | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
primary keyword
| Synopsis | Primary method of CSV to verify the revocation status | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify primary keyword | |
| Tree | primary | |
Description | This command configures the primary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the certificate of the peer. | |
| Options | ||
| Default | crl | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
secondary keyword
| Synopsis | Secondary method used to verify certificate revocation | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert status-verify secondary keyword | |
| Tree | secondary | |
Description | This command specifies the secondary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the peer certificate. | |
| Options | ||
| Default | none | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR |
trust-anchor-profile reference
| Synopsis | Trust anchor profile name | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic cert trust-anchor-profile reference | |
| Tree | trust-anchor-profile | |
Reference | configure ipsec trust-anchor-profile string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
id
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the id context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic id | |
| Tree | id | |
Description | Commands in this context specify the local ID used for IDi or IDr for IKEv2 negotiation. The default behavior depends on the local authentication method as follows:
| |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
fqdn string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FQDN used as the local ID IKE type | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic id fqdn string | |
| Tree | fqdn | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv4 string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 as the local ID type | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic id ipv4 string | |
| Tree | ipv4 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 used as the local IKE ID type | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic id ipv6 (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ipv6 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ike-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IKE policy ID | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic ike-policy reference | |
| Tree | ike-policy | |
Description | This command specifies the ID of the IKE policy used for IKE negotiation. The ipsec-transport-mode-profile configuration only supports IKEv2. | |
Reference | configure ipsec ike-policy number | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipsec-transform reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec transform IDs used by the dynamic key | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic ipsec-transform reference | |
| Tree | ipsec-transform | |
Description | This command specifies IPsec transform IDs used for CHILD_SA negotiation. | |
Reference | configure ipsec ipsec-transform number | |
| Max. Instances | 4 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
pre-shared-key string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Pre-shared key for authentication | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange dynamic pre-shared-key string | |
| Tree | pre-shared-key | |
| String Length | 1 to 115 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
manual
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the manual context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual | |
| Tree | manual | |
Description | Commands in this context configure settings for manually configured security associations for the IPsec tunnel. | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
keys [security-association] number direction keyword
| Synopsis | Enter the keys list instance | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
Description | Commands in this context configure the security association list for the tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
[security-association] number
| Synopsis | SA entry ID | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
direction keyword
| Synopsis | Direction of the IPsec tunnel | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
authentication-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the authentication algorithm | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 130 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
encryption-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the encryption algorithm | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword encryption-key string | |
| Tree | encryption-key | |
| String Length | 1 to 66 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipsec-transform reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Transform entry used by manual SAs | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword ipsec-transform reference | |
| Tree | ipsec-transform | |
Reference | configure ipsec ipsec-transform number | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
spi number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | SPI of inbound and outbound packets | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string key-exchange manual keys number direction keyword spi number | |
| Tree | spi | |
Description | This command specifies the Security Parameter Index (SPI) used to look up the instruction to verify and decrypt the incoming IPsec packets when the direction is inbound. When the direction is outbound, the SPI is used in the encoding of the outgoing packets. The remote node can use the SPI to look up the instruction to verify and decrypt the packet. | |
| Range | 256 to 16383 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local IPsec tunnel endpoint address | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string local-gateway-address-override (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-gateway-address-override | |
Description | This command configures the local IPsec tunnel endpoint address. This overrides the default endpoint address, which is the interface address. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
max-history-key-records
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the max-history-key-records context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string max-history-key-records | |
| Tree | max-history-key-records | |
Description | Commands in this context configure the settings for recording historical IPsec keys. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
esp number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of recent records | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string max-history-key-records esp number | |
| Tree | esp | |
| Range | 1 to 48 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
ike number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of historical IKE key records | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string max-history-key-records ike number | |
| Tree | ike | |
| Range | 1 to 3 | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
pmtu-discovery-aging number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Aging out time of the learned path MTU | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string pmtu-discovery-aging number | |
| Tree | pmtu-discovery-aging | |
Description | This command configures the temporary public and private MTU expiration time. The temporary MTU is used for MTU propagation. | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-sap number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Private SAP ID | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string private-sap number | |
| Tree | private-sap | |
| Range | 0 to 4094 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-service string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Private service name | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string private-service string | |
| Tree | private-service | |
Description | This command configures the private service name. If unconfigured, the private service is the service where the secured interface resides. | |
| String Length | 1 to 64 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
private-tcp-mss-adjust number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) adjustment | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
Description | This command specifies the TCP MSS to adjust for the tunnel on the private side. When configured, the system may use the value to update the MSS option in the received TCP SYN packet on the private side. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
propagate-pmtu-v4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv4 hosts | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string propagate-pmtu-v4 boolean | |
| Tree | propagate-pmtu-v4 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv4 hosts). | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
propagate-pmtu-v6 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv6 hosts | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string propagate-pmtu-v6 boolean | |
| Tree | propagate-pmtu-v6 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv6 hosts). | |
| Default | true | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
public-tcp-mss-adjust (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) on the public network | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
Description | This command configures the MSS for the TCP traffic in an IPsec tunnel that is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Options | ||
| Introduced | 22.7.R1 | |
Platforms |
VSR | |
remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remote IPsec tunnel endpoint address | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string remote-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | remote-gateway-address | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
replay-window number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Anti-replay window size | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string replay-window number | |
| Tree | replay-window | |
Description | This command specifies the size of an IPsec anti-replay window. If unconfigured, IPsec anti-replay is disabled. | |
| Range | 32 | 64 | 128 | 256 | 512 | |
| Units | packets | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
security-policy
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the security-policy context | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string security-policy | |
| Tree | security-policy | |
Description | Commands in this context specify a security policy used by the tunnel. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Security policy ID for use by the tunnel | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string security-policy id number | |
| Tree | id | |
| Max. Range | 0 to 4294967295 | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
strict-match boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable strict match of the security policy entry | |
| Context | configure service vprn string interface string ipsec ipsec-tunnel string security-policy strict-match boolean | |
| Tree | strict-match | |
Description | When configured to true, this command enables strict match of the security policy entry. When a CREATE_CHILD exchange request is received for a static IPsec tunnel, and this request is not a rekey request, ISA matches the received TSi and TSr with the configured security policy. This can be a match only when a received TS (in TSi or TSr) address range matches exactly with the subnet in a security policy entry. If there is no match, the setup fails, and TS_UNACCEPTABLE is sent. If there is a match, but there is an existing CHILD_SA for the matched security policy, the setup fails, and NO_PROPOSAL_CHOSEN is sent. If there is a match, and there is not a CHILD_SA for the matched entry, the subnet is sent in the matched security policy entry as TSi and TSr, and the CHILD_SA is created. | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | VSR | |
ipv6-exception reference
| Synopsis | IPv6 filter exception used to bypass encryption | |
| Context | configure service vprn string interface string ipsec ipv6-exception reference | |
| Tree | ipv6-exception | |
Description | This command specifies the IPv6 filter exception for an IPsec-secured IPv6 interface. When an IPv6 filter exception is added, clear text packets that match the exception criteria in the IPv6 filter exception can ingress the interface, even when IPsec is enabled on the interface. | |
Reference | configure filter ipv6-exception string | |
| Introduced | 22.7.R1 | |
Platforms | VSR |
public-sap number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Public SAP ID | |
| Context | configure service vprn string interface string ipsec public-sap number | |
| Tree | public-sap | |
| Range | 0 to 4094 | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
tunnel-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tunnel group ID | |
| Context | configure service vprn string interface string ipsec tunnel-group reference | |
| Tree | tunnel-group | |
Reference | configure isa tunnel-group number | |
Notes | This element is mandatory. | |
| Introduced | 22.7.R1 | |
Platforms | VSR | |
ipv4
addresses
address [ipv4-address] string
[ipv4-address] string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string interface string ipv4 addresses address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-directed-broadcasts boolean
| Synopsis | Forward directed broadcasts | |
| Context | configure service vprn string interface string ipv4 allow-directed-broadcasts boolean | |
| Tree | allow-directed-broadcasts | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string interface string ipv4 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string interface string ipv4 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string interface string ipv4 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string interface string ipv4 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string interface string ipv4 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string interface string ipv4 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dhcp
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service vprn string interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service vprn string interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service vprn string interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases allowed | |
| Context | configure service vprn string interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 0 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action keyword
circuit-id
| Synopsis | Enter the circuit-id context | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 circuit-id | |
| Tree | circuit-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-tuple
| Synopsis | Use the ASCII-encoded tuple for the circuit ID | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 circuit-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ifindex
none
sap-id
vlan-ascii-tuple
| Synopsis | Include the VLAN ID and dot1p bits in the ASCII tuple | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 circuit-id vlan-ascii-tuple | |
| Tree | vlan-ascii-tuple | |
Description | When configured, the router includes the VLAN ID and dot1p bits with the ASCII-tuple information. This only occurs on dot1q and QinQ-encapsulated ports. When the Option 82 bits are stripped, dot1p bits are copied to the Ethernet header of the outgoing packet. When unconfigured, the router leaves the circuit ID sub-option of the DHCP packet empty. | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-id
| Synopsis | Enter the remote-id context | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 remote-id | |
| Tree | remote-id | |
Description | Commands in this context configure the remote IP sub-option of the DHCP packet with the identity of the remote host end (typically the DHCP client). | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-string string
| Synopsis | User-defined ASCII string for the remote ID | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 remote-id ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac
none
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pool-name boolean
sap-id boolean
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service vprn string interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
string string
system-id boolean
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
emulated-server string
| Synopsis | IP address used as the DHCP server address for the SAP | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
Description | This command configures the IP address which will be used as the DHCP server address in the context of the SAP. Typically, the configured address should be in the context of the subnet represented by the service. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
value number
| Synopsis | DHCP lease time | |
| Context | configure service vprn string interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vprn string interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
relay-plain-bootp boolean
| Synopsis | Enable relaying of plain BOOTP packets | |
| Context | configure service vprn string interface string ipv4 dhcp relay-plain-bootp boolean | |
| Tree | relay-plain-bootp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service vprn string interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | All |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service vprn string interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service vprn string interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | All |
release-include-gi-address boolean
| Synopsis | Include gateway IP address in DHCP Release messages | |
| Context | configure service vprn string interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | IP addresses for DHCP server requests | |
| Context | configure service vprn string interface string ipv4 dhcp server string | |
| Tree | server | |
Description | This command configures a list of servers that this interface forwards requests to. The operator can enter the list of servers as either IP addresses or fully qualified domain names. The operator must specify at least one server specified for DHCP relay to work. If there are multiple servers, the system forwards the request to all the servers in the list. | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service vprn string interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
trusted boolean
| Synopsis | Relay untrusted packets | |
| Context | configure service vprn string interface string ipv4 dhcp trusted boolean | |
| Tree | trusted | |
Description | When configured to true, the router enables the trusted mode on the interface. When enabled, the relay agent changes the existing GI address (of the request) to the ingress interface, and forwards the request. A DHCP request that contains a GI address of 0.0.0.0 and an Option 82 field in the packet is discarded unless it arrives on a trusted circuit. This behavior only applies if the Relay Agent Information Option action is to keep the existing information. When the Option 82 field is replaced by the relay agent, the original Option 82 information is lost, and there is no reason to enable the trusted option. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
use-arp boolean
icmp
mask-reply boolean
| Synopsis | Allow responses to ICMP mask requests on the interface | |
| Context | configure service vprn string interface string ipv4 icmp mask-reply boolean | |
| Tree | mask-reply | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service vprn string interface string ipv4 icmp param-problem | |
| Tree | param-problem | |
Description | Commands in this context specify the settings for ICMP Parameter Problem messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sent Parameter Problem messages | |
| Context | configure service vprn string interface string ipv4 icmp param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
redirects
| Synopsis | Enter the redirects context | |
| Context | configure service vprn string interface string ipv4 icmp redirects | |
| Tree | redirects | |
Description | Commands in this context configure the settings for ICMP redirect messages generated by the interface. The system sends ICMP redirect messages to alert the sending node that a more optimal route is available on another router on the same subnetwork. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending ICMP redirect messages | |
| Context | configure service vprn string interface string ipv4 icmp redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
ttl-expired
| Synopsis | Enter the ttl-expired context | |
| Context | configure service vprn string interface string ipv4 icmp ttl-expired | |
| Tree | ttl-expired | |
Description | Commands in this context configure the settings for ICMP TTL expired messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending TTL expired messages | |
| Context | configure service vprn string interface string ipv4 icmp ttl-expired admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service vprn string interface string ipv4 icmp unreachables | |
| Tree | unreachables | |
Description | Commands in this context specify the settings for ICMP host and network destination unreachable messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending unreachable messages | |
| Context | configure service vprn string interface string ipv4 icmp unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
ip-helper-address string
| Synopsis | Gateway address | |
| Context | configure service vprn string interface string ipv4 ip-helper-address string | |
| Tree | ip-helper-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
local-dhcp-server reference
| Synopsis | DHCP server for the interface | |
| Context | configure service vprn string interface string ipv4 local-dhcp-server reference | |
| Tree | local-dhcp-server | |
Reference | configure service vprn string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
host-route
| Synopsis | Enter the host-route context | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery host-route | |
| Tree | host-route | |
| Introduced | 19.10.R1 | |
Platforms | All |
populate [route-type] keyword
| Synopsis | Enter the populate list instance | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Introduced | 19.10.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery host-route populate keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added in the route table for ARP or ND host routes. This tag can be matched on BGP VRF export and BGP peer export policies. | |
| Range | 1 to 255 | |
| Introduced | 19.10.R1 | |
|
Platforms | All | |
learn-unsolicited boolean
| Synopsis | Learn new entries from any received NA message | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery learn-unsolicited boolean | |
| Tree | learn-unsolicited | |
Description | When configured to true, the router can learn neighbor entries from received unsolicited Neighbor Advertisement (NA) messages, with or without the solicited (S) flag set. The command can be enabled for global addresses, link-local addresses, or for both. When configured to false, the router follows standard behavior for learning neighbor entries.
| |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit
log-only boolean
max-entries number
| Synopsis | Maximum number of entries learned on an IP interface | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery limit max-entries number | |
| Tree | max-entries | |
| Range | 0 to 524288 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
local-proxy-arp boolean
| Synopsis | Enable local proxy ARP on interface | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery local-proxy-arp boolean | |
| Tree | local-proxy-arp | |
Description | When configured to true, the router enables local proxy ARP on the interface. When configured to false, the router does not respond to ARP requests for addresses on the same subnet. | |
| Introduced | 16.0.R1 | |
Platforms | All |
populate boolean
proactive-refresh boolean
| Synopsis | Send a single refresh message before entry timeout | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery proactive-refresh boolean | |
| Tree | proactive-refresh | |
Description | When configured to true, the router always sends a refresh message 30 seconds before the timeout of the entry (a single refresh message with no retries). When configured to false, the router marks an entry as stale 30 seconds before age-out, and the router only sends an ARP request to refresh the entry if the IOM receives traffic that uses it. Then, the IOM asks the ARP application to send a refresh message. With ARP proactive refresh enabled, the ARP module sends a refresh message regardless of the IOM receiving traffic. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
proxy-arp-policy reference
| Synopsis | Proxy ARP policy name | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery proxy-arp-policy reference | |
| Tree | proxy-arp-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-proxy-arp boolean
| Synopsis | Enable remote proxy ARP on the interface | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery remote-proxy-arp boolean | |
| Tree | remote-proxy-arp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
retry-timer number
| Synopsis | ARP retry interval | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery retry-timer number | |
| Tree | retry-timer | |
| Range | 1 to 300 | |
| Units | deciseconds | |
| Default | 50 | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor [ipv4-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | IPv4 address that corresponds to the physical address | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor-unnumbered
| Synopsis | Enable the static-neighbor-unnumbered context | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery static-neighbor-unnumbered | |
| Tree | static-neighbor-unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery static-neighbor-unnumbered mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
| Synopsis | Timeout for an ARP entry learned on the interface | |
| Context | configure service vprn string interface string ipv4 neighbor-discovery timeout number | |
| Tree | timeout | |
Description | This command configures the minimum time an ARP entry learned on the IP interface is stored in the ARP table. ARP entries are automatically refreshed when an ARP request or gratuitous ARP is seen by an IP host. Otherwise, the ARP entry is aged from the ARP table. | |
| Range | 0 to 65535 | |
| Units | seconds | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms | All |
primary
address string
broadcast keyword
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on the IP address | |
| Context | configure service vprn string interface string ipv4 primary track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos-route-lookup keyword
| Synopsis | QoS Route lookup | |
| Context | configure service vprn string interface string ipv4 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
secondary [address] string
[address] string
broadcast keyword
igp-inhibit boolean
| Synopsis | Disable the running IGP from recognizing secondary IP | |
| Context | configure service vprn string interface string ipv4 secondary string igp-inhibit boolean | |
| Tree | igp-inhibit | |
Description | When configured to true, the running IGP does not recognize the secondary IP address as a local interface. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string interface string ipv4 secondary string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on the IP address | |
| Context | configure service vprn string interface string ipv4 secondary string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
tcp-mss number
unnumbered
| Synopsis | Enter the unnumbered context | |
| Context | configure service vprn string interface string ipv4 unnumbered | |
| Tree | unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-address string
| Synopsis | IP address for the interface | |
| Context | configure service vprn string interface string ipv4 unnumbered ip-address string | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-int-name string
| Synopsis | IP interface name | |
| Context | configure service vprn string interface string ipv4 unnumbered ip-int-name string | |
| Tree | ip-int-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | All |
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service vprn string interface string ipv4 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-default boolean
| Synopsis | Ignore default route when performing a uRPF check | |
| Context | configure service vprn string interface string ipv4 urpf-check ignore-default boolean | |
| Tree | ignore-default | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mode keyword
vrrp [virtual-router-id] number
[virtual-router-id] number
admin-state keyword
| Synopsis | Administrative state of VRRP | |
| Context | configure service vprn string interface string ipv4 vrrp number admin-state keyword | |
| Tree | admin-state | |
Description | The command determines the administrative state of non-owner virtual router instances. Non-owner virtual router instances can be administratively disabled. This allows the termination of VRRP participation in the virtual router and stops all routing and other access capabilities with regards to the virtual router IP addresses. Disabling the virtual router instance provides a mechanism to maintain the virtual routers without causing false backup or master state changes. When disabled, no VRRP advertisement messages are generated and all received VRRP advertisement messages are silently discarded with no processing. Whenever the administrative or operational state of a virtual router instance transitions, a log message is generated. An owner virtual router context does not use this command. To administratively disable an owner virtual router instance, use the admin-state command within the parent IP interface node which administratively disables the IP interface. | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | Password for simple text authentication | |
| Context | configure service vprn string interface string ipv4 vrrp number authentication-key string | |
| Tree | authentication-key | |
Description | This command optionally assigns a simple text password authentication key to generate master VRRP advertisement messages and validate received VRRP advertisement messages. If this command is re-executed with a different password key defined, the new key immediately replaces the old key. This command may be executed at any time. | |
| String Length | 1 to 38 | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup string
| Synopsis | Virtual router IP addresses for the interface | |
| Context | configure service vprn string interface string ipv4 vrrp number backup string | |
| Tree | backup | |
Description | This command associates virtual router IP addresses with those of the parental IP interface. This command has two different functions based on whether it is being executed on an owner or non-owner virtual router instance. Non-owner virtual router instances create a routable IP interface address that is operationally dependent on the virtual router instance mode (master or backup). This command, when executed on an owner virtual router instance, does not create a routable IP interface address; it simply defines the existing IP addresses of the parental IP interface that are advertised by the virtual router instance. For owner virtual router instances, this command defines the IP addresses that are advertised within VRRP advertisement messages. This communicates the IP addresses that the master is advertising to backup virtual routers receiving the messages. The specified unicast-ipv4-address must be equal to one of the existing IP addresses in the parental IP interface (primary or secondary) or this command fails. See "Owner and non-owner VRRP" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Router Configuration Guide for more information about owner and non-owner virtual router instances. | |
| Max. Instances | 16 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string interface string ipv4 vrrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
dest-ip string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination IP address to use for BFD session | |
| Context | configure service vprn string interface string ipv4 vrrp number bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service vprn string interface string ipv4 vrrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service vprn string interface string ipv4 vrrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
init-delay number
| Synopsis | VRRP initialization delay timer | |
| Context | configure service vprn string interface string ipv4 vrrp number init-delay number | |
| Tree | init-delay | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac string
| Synopsis | Virtual MAC address to use in ARP responses | |
| Context | configure service vprn string interface string ipv4 vrrp number mac string | |
| Tree | mac | |
Description | This command sets an explicit MAC address for the virtual router instance that overrides the VRRP default derived from the VRID. Changing the default MAC address is useful when an existing HSRP or other non-VRRP default MAC is in use by the IP hosts that use the virtual router IP address. Many hosts do not monitor unessential ARPs and continue to use the cached non-VRRP MAC address after the virtual router becomes master of the host’s gateway address. Additionally, this command sets the MAC address used in ARP responses when the virtual router instance is master. Routing of IP packets with unicast-mac-address as the destination MAC is also enabled. The MAC must be the same for all virtual routers participating as a virtual router or indeterminate connectivity by the attached IP hosts results. All VRRP advertisement messages are transmitted with unicast-mac-address as the source MAC. An operator can execute this command at any time and it takes effect immediately. When the virtual router MAC on a master virtual router instance changes, a gratuitous ARP is immediately sent with a VRRP advertisement message. If the virtual router instance is disabled or operating as a backup, the gratuitous ARP and VRRP advertisement messages are not sent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
master-int-inherit boolean
| Synopsis | Allow master instance to dictate the master down timer | |
| Context | configure service vprn string interface string ipv4 vrrp number master-int-inherit boolean | |
| Tree | master-int-inherit | |
Description | When configured to true, the virtual router instance inherits the advertisement interval timer of the master VRRP router, which backup routers use to calculate the master down timer. When configured to false, the locally configured message interval must match the master's VRRP advertisement message advertisement interval field value or the message is discarded. | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-interval number
| Synopsis | Interval for sending VRRP advertisement messages | |
| Context | configure service vprn string interface string ipv4 vrrp number message-interval number | |
| Tree | message-interval | |
Description | This command configures the administrative advertisement message timer used by the master virtual router instance to send VRRP advertisement messages. The backup master down timer is derived from the value configured using this command. The usage of this command varies for non-owner virtual router instances, depending on the state of the virtual router (master or backup) and the state of the master-int-inherit command:
| |
| Range | 1 to 2559 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-oper-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VRRP instance to follow a specified operational group | |
| Context | configure service vprn string interface string ipv4 vrrp number monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | This command configures VRRP to associate with an operational group. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router, the operational group is up and the operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 22.2.R1 | |
Platforms | All | |
ntp-reply boolean
| Synopsis | Allow processing of NTP requests | |
| Context | configure service vprn string interface string ipv4 vrrp number ntp-reply boolean | |
| Tree | ntp-reply | |
Description | When configured to true, the router redirects NTP requests to the VRRP virtual IP address. This behavior only applies to the router acting as the master VRRP router. When configured to false, the router does not process NTP requests. | |
| Default | false | |
| Introduced | 20.2.R1 | |
|
Platforms | All |
oper-group reference
| Synopsis | Operational group name associated with the VRRP | |
| Context | configure service vprn string interface string ipv4 vrrp number oper-group reference | |
| Tree | oper-group | |
Description | This command configures an operational group to associate with the VRRP. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router (MR), the operational group is up. The operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
owner boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate the virtual router instance as owner | |
| Context | configure service vprn string interface string ipv4 vrrp number owner boolean | |
| Tree | owner | |
Description | When configured to true, the router designates this virtual router instance as the owner of the virtual router IP addresses. Therefore, this virtual router becomes responsible for forwarding packets sent to the virtual router IP addresses. The owner also assumes the role of master virtual router. When configured to false, this virtual router instance is designated as a non-owner. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
passive boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Suppress the processing of VRRP advertisement messages | |
| Context | configure service vprn string interface string ipv4 vrrp number passive boolean | |
| Tree | passive | |
Description | When configured to true, the router identifies this virtual router instance as passive; and therefore the owner of the virtual router IP addresses. A passive virtual router instance does not transmit or receive VRRP advertisement messages and is always in either the master state (if the interface is operationally up) or the init state (if the interface is operationally down). When configured to false, this virtual router instance is not identified as passive, meaning that it transmits and receives VRRP advertisement messages. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
ping-reply boolean
| Synopsis | Allow non-owner master to reply to ICMP echo requests | |
| Context | configure service vprn string interface string ipv4 vrrp number ping-reply boolean | |
| Tree | ping-reply | |
Description | When configured to true, the router allows the non-owner master to reply to ICMP echo requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the ping request. Ping must not have been disabled at the management security level (either on the parental IP interface or on the Ping source host address). When configured to false, ICMP echo requests sent to non-owner master virtual IP addresses are silently discarded. Non-owner backup virtual routers never respond to ICMP echo requests, regardless of the configuration of this command. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | VRRP priority control policy | |
| Context | configure service vprn string interface string ipv4 vrrp number policy reference | |
| Tree | policy | |
Description | This command configures a VRRP priority control policy to associate with the virtual router instance. VRRP priority control policies can override or adjust the base priority value of the virtual router instance, depending on events or conditions within the chassis. An operator can associate a policy with more than one virtual router instance. The priority events within the policy either override or diminish the base priority set with the priority command. As priority events clear in the policy, the in-use priority can eventually be restored to the base priority value. For non-owner virtual router instances, if this command is not executed, the base priority is used as the in-use priority. | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
preempt boolean
| Synopsis | Allow the VRRP to override an existing non-owner master | |
| Context | configure service vprn string interface string ipv4 vrrp number preempt boolean | |
| Tree | preempt | |
Description | When configured to true, this virtual router instance overrides any non-owner master with an in-use message priority value less than the in-use priority value of this virtual router. When configured to false, this virtual router only becomes master if the master down timer expires before a VRRP advertisement message is received from another virtual router. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
priority number
| Synopsis | Base priority for the VRRP | |
| Context | configure service vprn string interface string ipv4 vrrp number priority number | |
| Tree | priority | |
Description | This command configures the base router priority for the virtual router instance, which defines the selection order of the virtual router in the master election process. The in-use priority is derived from the base priority. However, the in-use priority is modified by optional VRRP priority control policies. An operator can use VRRP priority control policies to either override or adjust the base priority value depending on events or conditions within the chassis. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ssh-reply boolean
| Synopsis | Allow the non-owner master to reply to SSH requests | |
| Context | configure service vprn string interface string ipv4 vrrp number ssh-reply boolean | |
| Tree | ssh-reply | |
Description | When configured to true, the router allows the non-owner master to reply to SSH requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the SSH request. SSH cannot be disabled at the management security level (either on the parental IP interface or on the SSH source host address). When configure to false, SSH requests to non-owner master virtual IP addresses are silently discarded. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
standby-forwarding boolean
| Synopsis | Allow standby router to forward traffic | |
| Context | configure service vprn string interface string ipv4 vrrp number standby-forwarding boolean | |
| Tree | standby-forwarding | |
Description | When configured to true, the standby router forwards all traffic. When configured to false, the standby router cannot forward traffic sent to the MAC address of the virtual router. However, the standby router still forwards traffic sent to its own MAC address. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
telnet-reply boolean
| Synopsis | Allow non-owner master to reply to Telnet requests | |
| Context | configure service vprn string interface string ipv4 vrrp number telnet-reply boolean | |
| Tree | telnet-reply | |
Description | When configured to true, the router allows the non-owner master to reply to Telnet requests directed at the IP addresses of the virtual router instance. Any routed interface can receive Telnet requests. Telnet cannot be disabled at the management security level (either on the parental IP interface or on the Telnet source host address). When configured to false, the router silently discards Telnet requests sent to non-owner master virtual IP addresses. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
traceroute-reply boolean
| Synopsis | Allow non-owner master to reply to traceroute requests | |
| Context | configure service vprn string interface string ipv4 vrrp number traceroute-reply boolean | |
| Tree | traceroute-reply | |
Description | When configured to true, the router allows a non-owner master to reply to traceroute requests directed to the IP addresses of the virtual router instance. When configured to false, the router silently discards traceroute requests sent to non-owner master virtual IP addresses. Traceroute must not have been disabled at the management security level (either on the parental IP interface or the source host address). | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6
address [ipv6-address] string
[ipv6-address] string
duplicate-address-detection boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable Duplicate Address Detection | |
| Context | configure service vprn string interface string ipv6 address string duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
Description | When configured to true, the router enables Duplicate Address Detection (DAD). When configured to false, the router disables DAD and sets the address to preferred, even if there is a duplicated address. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
eui-64 boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Form IPv6 address from prefix and 64-bit interface ID | |
| Context | configure service vprn string interface string ipv6 address string eui-64 boolean | |
| Tree | eui-64 | |
Description | When configured to true, the router forms a complete IPv6 address from the supplied prefix and 64-bit interface identifier. The 64-bit interface identifier is derived from the MAC address on Ethernet interfaces. For interfaces without a MAC address, for example POS interfaces, use the base MAC address of the chassis. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
prefix-length number
| Synopsis | IPv6 address prefix length | |
| Context | configure service vprn string interface string ipv6 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 4 to 128 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
primary-preference number
| Synopsis | Index assigned to the IPv6 address of the interface | |
| Context | configure service vprn string interface string ipv6 address string primary-preference number | |
| Tree | primary-preference | |
Description | This command assigns a primary preference index to an IPv6 address of the interface to enforce the order in which the address is used by control plane protocols and applications that require a fixed address of the interface, such as LDP and Segment Routing. In cases where a fixed address is required when originating packets from the interface, the IPv6 address with the lowest primary preference index is selected. If the selected address is removed, the next IPv6 address with the next lowest primary preference index is selected. If this index is not specified for the IPv6 address, the system assigns the next available index value to the address. The address index space is unique across all addresses of a given interface. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
track-srrp number
| Synopsis | SRRP ID whose state is tracked on this IP address | |
| Context | configure service vprn string interface string ipv6 address string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string interface string ipv6 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string interface string ipv6 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string interface string ipv6 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string interface string ipv6 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string interface string ipv6 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string interface string ipv6 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dhcp6
relay
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-nbr-of-leases number
| Synopsis | Maximum lease state entries allowed for the interface | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate max-nbr-of-leases number | |
| Tree | max-nbr-of-leases | |
| Range | 0 to 32767 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
route-populate
| Synopsis | Enter the route-populate context | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate route-populate | |
| Tree | route-populate | |
| Introduced | 16.0.R1 | |
Platforms | All |
na boolean
| Synopsis | Create route based on IA_NA prefix option in relay-reply message | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate route-populate na boolean | |
| Tree | na | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pd
| Synopsis | Enable the pd context | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate route-populate pd | |
| Tree | pd | |
| Introduced | 16.0.R1 | |
Platforms | All |
exclude boolean
ta boolean
| Synopsis | Create route based on IA_TA prefix option in relay-reply message | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay lease-populate route-populate ta boolean | |
| Tree | ta | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-address string
| Synopsis | Link address of the DHCPv6 relay messages | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
neighbor-resolution boolean
| Synopsis | Enable neighbor resolution via DHCPv6 relay | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay neighbor-resolution boolean | |
| Tree | neighbor-resolution | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
option
interface-id
| Synopsis | Enter the interface-id context | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay option interface-id | |
| Tree | interface-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
ascii-tuple
| Synopsis | Use ASCII-encoded concatenated tuple | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay option interface-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | All |
if-index
sap-id
string string
| Synopsis | String for interface ID option in DHCPv6 relay packet | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay option interface-id string string | |
| Tree | string | |
| String Length | 1 to 80 | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | All |
remote-id boolean
python-policy reference
| Synopsis | Python policy name | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
server string
source-address string
| Synopsis | Source IPv6 address of the DHCPv6 relay messages | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
user-db reference
| Synopsis | Local user database for authentication | |
| Context | configure service vprn string interface string ipv6 dhcp6 relay user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server
max-nbr-of-leases number
| Synopsis | DHCPv6 leases allowed | |
| Context | configure service vprn string interface string ipv6 dhcp6 server max-nbr-of-leases number | |
| Tree | max-nbr-of-leases | |
| Range | 0 to 8000 | |
| Default | 8000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-delegation
| Synopsis | Enter the prefix-delegation context | |
| Context | configure service vprn string interface string ipv6 dhcp6 server prefix-delegation | |
| Tree | prefix-delegation | |
Description | Commands in this context configure the options for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the link topology in the network to which the prefixes are assigned. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the prefix delegation | |
| Context | configure service vprn string interface string ipv6 dhcp6 server prefix-delegation admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
prefix [ipv6-prefix] string
[ipv6-prefix] string
client-id
duid string
iaid number
| Synopsis | IAID from the requesting router to match | |
| Context | configure service vprn string interface string ipv6 dhcp6 server prefix-delegation prefix string client-id iaid number | |
| Tree | iaid | |
Description | This command configures the Identity Association ID (IAID) associated with a prefix delegation entry and must match the IAID sent by the requesting router for the prefix delegation to succeed. | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
preferred-lifetime (number | keyword)
| Synopsis | Preferred lifetime of the prefix | |
| Context | configure service vprn string interface string ipv6 dhcp6 server prefix-delegation prefix string preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
Description | This command configures the preferred lifetime of the prefix. The value cannot be greater than the valid lifetime value. | |
| Range | 1 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 604800 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
valid-lifetime (number | keyword)
| Synopsis | Valid lifetime of the prefix | |
| Context | configure service vprn string interface string ipv6 dhcp6 server prefix-delegation prefix string valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 1 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 2592000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
duplicate-address-detection boolean
| Synopsis | Enable Duplicate Address Detection per interface | |
| Context | configure service vprn string interface string ipv6 duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
forward-ipv4-packets boolean
| Synopsis | Forward unencapsulated IPv4 packets | |
| Context | configure service vprn string interface string ipv6 forward-ipv4-packets boolean | |
| Tree | forward-ipv4-packets | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
icmp6
packet-too-big
| Synopsis | Enter the packet-too-big context | |
| Context | configure service vprn string interface string ipv6 icmp6 packet-too-big | |
| Tree | packet-too-big | |
Description | Commands in this context configure limiting the number of ICMPv6 Packet Too Big messages. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Packet Too Big message sends | |
| Context | configure service vprn string interface string ipv6 icmp6 packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service vprn string interface string ipv6 icmp6 param-problem | |
| Tree | param-problem | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Parameter Problem message sends | |
| Context | configure service vprn string interface string ipv6 icmp6 param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
redirects
admin-state keyword
| Synopsis | Administrative state of Redirect message sends | |
| Context | configure service vprn string interface string ipv6 icmp6 redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
time-exceeded
| Synopsis | Enter the time-exceeded context | |
| Context | configure service vprn string interface string ipv6 icmp6 time-exceeded | |
| Tree | time-exceeded | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Time Exceeded message sends | |
| Context | configure service vprn string interface string ipv6 icmp6 time-exceeded admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service vprn string interface string ipv6 icmp6 unreachables | |
| Tree | unreachables | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of Unreachable message sends | |
| Context | configure service vprn string interface string ipv6 icmp6 unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
link-local-address
| Synopsis | Enter the link-local-address context | |
| Context | configure service vprn string interface string ipv6 link-local-address | |
| Tree | link-local-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
duplicate-address-detection boolean
| Synopsis | Enable Duplicate Address Detection | |
| Context | configure service vprn string interface string ipv6 link-local-address duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
Description | When configured to true, the router enables Duplicate Address Detection (DAD) on the interface. When configured to false, the router disables DAD and sets the address to preferred, even if there is a duplicated address. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
local-dhcp-server reference
| Synopsis | DHCP server for the interface | |
| Context | configure service vprn string interface string ipv6 local-dhcp-server reference | |
| Tree | local-dhcp-server | |
Reference | configure service vprn string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
host-route
| Synopsis | Enter the host-route context | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery host-route | |
| Tree | host-route | |
| Introduced | 20.2.R1 | |
Platforms | All |
populate [route-type] keyword
| Synopsis | Enter the populate list instance | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Introduced | 20.2.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery host-route populate keyword | |
| Tree | populate | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 20.2.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery host-route populate keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added in the route table for ARP or ND host routes. This tag can be matched on BGP VRF export and BGP peer export policies. | |
| Range | 1 to 255 | |
| Introduced | 20.2.R1 | |
|
Platforms | All | |
learn-unsolicited keyword
| Synopsis | Type of entries learned from unsolicited NA messages | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery learn-unsolicited keyword | |
| Tree | learn-unsolicited | |
Description | This command enables the ability to learn neighbor entries out of received unsolicited Neighbor Advertisement (NA) messages, with or without the solicited flag set. When unconfigured, the router follows standard RFC 4861 behavior for learning of neighbor entries. The neighbor is put in the stale state. This is the standard RFC behavior. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
limit
log-only boolean
| Synopsis | Generate log entries when limit is reached | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery limit log-only boolean | |
| Tree | log-only | |
Description | When configured to true, the router sends the warning message at the specified threshold percentage or upon exceeding the specified limit. Entries that exceed the limit are learned. When configured to false, the router does not send the warning message. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-entries number
| Synopsis | Maximum number of entries learned on an IP interface | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery limit max-entries number | |
| Tree | max-entries | |
Description | This command configures the maximum number of entries that can be learned on an IP interface. When unconfigured, no maximum limit is imposed. | |
| Range | 0 to 102400 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
local-proxy-nd boolean
| Synopsis | Enable local proxy neighbor discovery on the interface | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery local-proxy-nd boolean | |
| Tree | local-proxy-nd | |
Description | When configured to true, the router enables local proxy neighbor discovery on the interface and replies to neighbor solicitation requests when both the hosts are on the same subnet. In this case, ICMP redirects are disabled. When configured to false, the router disables local proxy neighbor discovery on the interface and does not reply to neighbor solicitation requests if both the hosts are on the same subnet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
proactive-refresh keyword
| Synopsis | Proactive refresh of neighbor entries | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery proactive-refresh keyword | |
| Tree | proactive-refresh | |
Description | This command enables a proactive refresh of the neighbor entries. After the stale timer expires, the router sends an NUD message to the host (regardless of the existence of traffic to the IP address on the IOM), so the entry can be refreshed or removed. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
proxy-nd-policy reference
| Synopsis | Proxy Neighbor Discovery policy name for the interface | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery proxy-nd-policy reference | |
| Tree | proxy-nd-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
reachable-time number
| Synopsis | Neighbor reachability detection timer | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery reachable-time number | |
| Tree | reachable-time | |
| Range | 30 to 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
secure-nd
admin-state keyword
| Synopsis | Administrative state of Secure Neighbor Discovery | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery secure-nd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-unsecured-msgs boolean
| Synopsis | Accept unsecured messages | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery secure-nd allow-unsecured-msgs boolean | |
| Tree | allow-unsecured-msgs | |
Description | When configured to true, the router accepts unsecured messages. When Secure Neighbor Discovery (SeND) is enabled, only secure messages are accepted. When configured to false, the router disables the acceptance of unsecured messages. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
public-key-min-bits number
| Synopsis | Minimum acceptable key length for public keys in CGA | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery secure-nd public-key-min-bits number | |
| Tree | public-key-min-bits | |
| Range | 512 to 1024 | |
| Default | 1024 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
security-parameter number
| Synopsis | Security parameter used in the generation of a CGA | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery secure-nd security-parameter number | |
| Tree | security-parameter | |
| Range | 0 to 1 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-time number
| Synopsis | Time a Neighbor Discovery cache entry remains stale | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery stale-time number | |
| Tree | stale-time | |
| Range | 60 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
static-neighbor [ipv6-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-address] string
| Synopsis | IPv6 address corresponding to the physical address | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service vprn string interface string ipv6 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos-route-lookup keyword
| Synopsis | QoS Route lookup | |
| Context | configure service vprn string interface string ipv6 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tcp-mss number
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service vprn string interface string ipv6 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-default boolean
| Synopsis | Ignore default route when performing a uRPF check | |
| Context | configure service vprn string interface string ipv6 urpf-check ignore-default boolean | |
| Tree | ignore-default | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mode keyword
vrrp [virtual-router-id] number
[virtual-router-id] number
admin-state keyword
| Synopsis | Administrative state of VRRP | |
| Context | configure service vprn string interface string ipv6 vrrp number admin-state keyword | |
| Tree | admin-state | |
Description | The command determines the administrative state of non-owner virtual router instances. Non-owner virtual router instances can be administratively disabled. This allows the termination of VRRP participation in the virtual router and stops all routing and other access capabilities with regards to the virtual router IP addresses. Disabling the virtual router instance provides a mechanism to maintain the virtual routers without causing false backup or master state changes. When disabled, no VRRP advertisement messages are generated and all received VRRP advertisement messages are silently discarded with no processing. Whenever the administrative or operational state of a virtual router instance transitions, a log message is generated. An owner virtual router context does not use this command. To administratively disable an owner virtual router instance, use the admin-state command within the parent IP interface node which administratively disables the IP interface. | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup string
| Synopsis | Virtual router IP addresses for the interface | |
| Context | configure service vprn string interface string ipv6 vrrp number backup string | |
| Tree | backup | |
Description | This command associates router IPv6 virtual router IP addresses with those of the parental IP interface. This command has two different functions based on whether it is being executed on an owner or non-owner virtual router instance. Non-owner virtual router instance create a routable IP interface address that is operationally dependent on the virtual router instance mode (master or backup). This command, when executed on an owner virtual router instance, does not create a routable IP interface address; it simply defines the existing IP addresses of the parental IP interface that are advertised by the virtual router instance. For owner virtual router instances, this command defines the IP addresses that are advertised within VRRP advertisement messages. This communicates the IP addresses that the master is representing to backup virtual routers receiving the messages. The specified IPv6 address must be equal to one of the existing parental IP addresses in the parental IP interface (primary or secondary) or this command fails. See "Owner and non-owner VRRP" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Router Configuration Guide for more information about owner and non-owner virtual router instances. | |
| Max. Instances | 4 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string interface string ipv6 vrrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
dest-ip (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address for the BFD session | |
| Context | configure service vprn string interface string ipv6 vrrp number bfd-liveness dest-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service vprn string interface string ipv6 vrrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service vprn string interface string ipv6 vrrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
init-delay number
| Synopsis | VRRP initialization delay timer | |
| Context | configure service vprn string interface string ipv6 vrrp number init-delay number | |
| Tree | init-delay | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mac string
| Synopsis | Virtual MAC address to use in ARP responses | |
| Context | configure service vprn string interface string ipv6 vrrp number mac string | |
| Tree | mac | |
Description | This command sets an explicit MAC address for the virtual router instance that overrides the VRRP default derived from the VRID. Changing the default MAC address is useful when an existing HSRP or other non-VRRP default MAC is in use by the IP hosts that use the virtual router IP address. Many hosts do not monitor unessential ARPs and continue to use the cached non-VRRP MAC address after the virtual router becomes master of the host’s gateway address. Additionally, this command sets the MAC address used in ARP responses when the virtual router instance is master. Routing of IP packets with unicast-mac-address as the destination MAC is also enabled. The MAC must be the same for all virtual routers participating as a virtual router or indeterminate connectivity by the attached IP hosts results. All VRRP advertisement messages are transmitted with unicast-mac-address as the source MAC. An operator can execute this command at any time and it takes effect immediately. When the virtual router MAC on a master virtual router instance changes, a gratuitous ARP is immediately sent with a VRRP advertisement message. If the virtual router instance is disabled or operating as a backup, the gratuitous ARP and VRRP advertisement messages are not sent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
master-int-inherit boolean
| Synopsis | Allow master instance to dictate the master down timer | |
| Context | configure service vprn string interface string ipv6 vrrp number master-int-inherit boolean | |
| Tree | master-int-inherit | |
Description | When configured to true, the virtual router instance inherits the advertisement interval timer of the master VRRP router, which backup routers use to calculate the master down timer. When configured to false, the locally configured message interval must match the master's VRRP advertisement message advertisement interval field value or the message is discarded. | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-interval number
| Synopsis | Interval for sending VRRP advertisement messages | |
| Context | configure service vprn string interface string ipv6 vrrp number message-interval number | |
| Tree | message-interval | |
Description | This command configures the administrative advertisement message timer used by the master virtual router instance to send VRRP advertisement messages. The backup master down timer is derived from the value configured using this command. The use of this command varies for non-owner virtual router instances, depending on the state of the virtual router (master or backup) and the state of the master-int-inherit command:
| |
| Range | 10 to 4095 | |
| Units | centiseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-oper-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | VRRP instance to follow a specified operational group | |
| Context | configure service vprn string interface string ipv6 vrrp number monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | This command configures VRRP to associate with an operational group. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router, the operational group is up and the operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 22.2.R1 | |
Platforms | All | |
ntp-reply boolean
| Synopsis | Allow processing of NTP requests | |
| Context | configure service vprn string interface string ipv6 vrrp number ntp-reply boolean | |
| Tree | ntp-reply | |
Description | When configured to true, the router redirects NTP requests to the VRRP virtual IP address. This behavior only applies to the router acting as the master VRRP router. When configured to false, the router does not process NTP requests. | |
| Default | false | |
| Introduced | 20.2.R1 | |
|
Platforms | All |
oper-group reference
| Synopsis | Operational group name associated with the VRRP | |
| Context | configure service vprn string interface string ipv6 vrrp number oper-group reference | |
| Tree | oper-group | |
Description | This command configures an operational group to associate with the VRRP. When associated, VRRP notifies the operational group of its state changes so that other protocols can monitor it to provide a redundancy mechanism. When VRRP is the master router (MR), the operational group is up. The operational group is down for all other VRRP states. | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
owner boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate the virtual router instance as owner | |
| Context | configure service vprn string interface string ipv6 vrrp number owner boolean | |
| Tree | owner | |
Description | When configured to true, the router designates this virtual router instance as the owner of the virtual router IP addresses. Therefore, this virtual router becomes responsible for forwarding packets sent to the virtual router IP addresses. The owner also assumes the role of master virtual router. When configured to false, this virtual router instance is designated as a non-owner. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
passive boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Suppress the processing of VRRP advertisement messages | |
| Context | configure service vprn string interface string ipv6 vrrp number passive boolean | |
| Tree | passive | |
Description | When configured to true, the router identifies this virtual router instance as passive; and therefore the owner of the virtual router IP addresses. A passive virtual router instance does not transmit or receive VRRP advertisement messages and is always in either the master state (if the interface is operationally up) or the init state (if the interface is operationally down). When configured to false, this virtual router instance is not identified as passive, meaning that it transmits and receives VRRP advertisement messages. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
ping-reply boolean
| Synopsis | Allow non-owner master to reply to ICMP echo requests | |
| Context | configure service vprn string interface string ipv6 vrrp number ping-reply boolean | |
| Tree | ping-reply | |
Description | When configured to true, the router allows the non-owner master to reply to ICMP echo requests directed at the IP addresses of the virtual router instance. Any routed interface can receive the ping request. Ping must not have been disabled at the management security level (either on the parental IP interface or on the Ping source host address). When configured to false, ICMP echo requests sent to non-owner master virtual IP addresses are silently discarded. Non-owner backup virtual routers never respond to ICMP echo requests, regardless of the configuration of this command. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | VRRP priority control policy | |
| Context | configure service vprn string interface string ipv6 vrrp number policy reference | |
| Tree | policy | |
Description | This command configures a VRRP priority control policy to associate with the virtual router instance. VRRP priority control policies can override or adjust the base priority value of the virtual router instance, depending on events or conditions within the chassis. An operator can associate a policy with more than one virtual router instance. The priority events within the policy either override or diminish the base priority set with the priority command. As priority events clear in the policy, the in-use priority can eventually be restored to the base priority value. For non-owner virtual router instances, if this command is not executed, the base priority is used as the in-use priority. | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
preempt boolean
| Synopsis | Allow the VRRP to override an existing non-owner master | |
| Context | configure service vprn string interface string ipv6 vrrp number preempt boolean | |
| Tree | preempt | |
Description | When configured to true, this virtual router instance overrides any non-owner master with an in-use message priority value less than the in-use priority value of this virtual router. When configured to false, this virtual router only becomes master if the master down timer expires before a VRRP advertisement message is received from another virtual router. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
priority number
| Synopsis | Base priority for the VRRP | |
| Context | configure service vprn string interface string ipv6 vrrp number priority number | |
| Tree | priority | |
Description | This command configures the base router priority for the virtual router instance, which defines the selection order of the virtual router in the master election process. The in-use priority is derived from the base priority. However, the in-use priority is modified by optional VRRP priority control policies. An operator can use VRRP priority control policies to either override or adjust the base priority value depending on events or conditions within the chassis. | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
standby-forwarding boolean
| Synopsis | Allow standby router to forward traffic | |
| Context | configure service vprn string interface string ipv6 vrrp number standby-forwarding boolean | |
| Tree | standby-forwarding | |
Description | When configured to true, the standby router forwards all traffic. When configured to false, the standby router cannot forward traffic sent to the MAC address of the virtual router. However, the standby router still forwards traffic sent to its own MAC address. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
telnet-reply boolean
| Synopsis | Allow non-owner master to reply to Telnet requests | |
| Context | configure service vprn string interface string ipv6 vrrp number telnet-reply boolean | |
| Tree | telnet-reply | |
Description | When configured to true, the router allows the non-owner master to reply to Telnet requests directed at the IP addresses of the virtual router instance. Any routed interface can receive Telnet requests. Telnet cannot be disabled at the management security level (either on the parental IP interface or on the Telnet source host address). When configured to false, the router silently discards Telnet requests sent to non-owner master virtual IP addresses. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
traceroute-reply boolean
| Synopsis | Allow non-owner master to reply to traceroute requests | |
| Context | configure service vprn string interface string ipv6 vrrp number traceroute-reply boolean | |
| Tree | traceroute-reply | |
Description | When configured to true, the router allows a non-owner master to reply to traceroute requests directed to the IP addresses of the virtual router instance. When configured to false, the router silently discards traceroute requests sent to non-owner master virtual IP addresses. Traceroute must not have been disabled at the management security level (either on the parental IP interface or the source host address). | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
load-balancing
| Synopsis | Enter the load-balancing context | |
| Context | configure service vprn string interface string load-balancing | |
| Tree | load-balancing | |
| Introduced | 16.0.R1 | |
Platforms | All |
flow-label-load-balancing boolean
| Synopsis | Enable flow label load balancing | |
| Context | configure service vprn string interface string load-balancing flow-label-load-balancing boolean | |
| Tree | flow-label-load-balancing | |
Description | When configured to true, the router enables load balancing in ECMP and LAG based on the output of a hash performed on the triplet (SA, DA, flow label) in the header of an IPv6 packet received on an IES, VPRN, R-VPLS, CSC, or network interface. When configured to false, the router disables load balancing in ECMP and LAG. | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
ip-load-balancing keyword
| Synopsis | IP load-balancing algorithm | |
| Context | configure service vprn string interface string load-balancing ip-load-balancing keyword | |
| Tree | ip-load-balancing | |
Description | This command specifies whether to include the source address, destination address, or both in LAG or ECMP hash on IP interfaces. Additionally, when the l4-load-balancing command is enabled, this command also includes the source or destination port in the hash inputs. | |
| Options | ||
| Default | both | |
| Introduced | 16.0.R3 | |
Platforms | All |
spi-load-balancing boolean
| Synopsis | Enable SPI use in hashing | |
| Context | configure service vprn string interface string load-balancing spi-load-balancing boolean | |
| Tree | spi-load-balancing | |
Description | When configured to true, the router uses the Security Parameter Index (SPI) in hashing for ESP and AH encrypted IPv4 and IPv6 traffic. This is a per-interface setting. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
teid-load-balancing boolean
| Synopsis | Enable use of TEID in hashing | |
| Context | configure service vprn string interface string load-balancing teid-load-balancing boolean | |
| Tree | teid-load-balancing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
loopback boolean
mac string
mac-accounting boolean
| Synopsis | Enable MAC accounting functionality | |
| Context | configure service vprn string interface string mac-accounting boolean | |
| Tree | mac-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
monitor-oper-group reference
| Synopsis | Operational group to monitor | |
| Context | configure service vprn string interface string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
multi-chassis-shunting-profile reference
| Synopsis | Multi-chassis shunting profile name | |
| Context | configure service vprn string interface string multi-chassis-shunting-profile reference | |
| Tree | multi-chassis-shunting-profile | |
Description | This command configures the name of a multi-chassis shunting profile to use on public or private tunnel interfaces. | |
Reference | configure service vprn string ipsec multi-chassis-shunting-profile string | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ping-template
| Synopsis | Enable the ping-template context | |
| Context | configure service vprn string interface string ping-template | |
| Tree | ping-template | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the ping template | |
| Context | configure service vprn string interface string ping-template admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
destination-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ping template destination address | |
| Context | configure service vprn string interface string ping-template destination-address string | |
| Tree | destination-address | |
Description | This command configures the address to where the ICMP echo requests are directed to test connectivity. The source of the ICMP echo request is the primary IPv4 address of the interface under which the ping-template is configured. The destination address must be on the same subnet as the source IP address. Unnumbered interfaces and loopback addresses are not supported. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
name reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Ping template name | |
| Context | configure service vprn string interface string ping-template name reference | |
| Tree | name | |
Description | This command configures the name of the ping template to be assigned to the IP interface. | |
Reference | configure test-oam icmp ping-template string | |
Notes | This element is mandatory. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
ptp-hw-assist
| Synopsis | Enter the ptp-hw-assist context | |
| Context | configure service vprn string interface string ptp-hw-assist | |
| Tree | ptp-hw-assist | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the PTP time stamping assist | |
| Context | configure service vprn string interface string ptp-hw-assist admin-state keyword | |
| Tree | admin-state | |
Description | This command controls the administrative state of port-based time stamping assist of PTP packets at the physical interface.This capability is supported on specific hardware. The command may be blocked if not all hardware has the required level of support. Only one interface per physical port can have ptp-hw-assist enabled. This feature cannot be enabled if the physical port supporting the interface is configured as a PTP port. | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
radius-auth-policy reference
| Synopsis | Authentication policy | |
| Context | configure service vprn string interface string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
[sap-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service vprn string interface string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service vprn string interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
anti-spoof keyword
| Synopsis | Anti-spoof filtering | |
| Context | configure service vprn string interface string sap string anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service vprn string interface string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bandwidth number
calling-station-id string
| Synopsis | Calling station ID | |
| Context | configure service vprn string interface string sap string calling-station-id string | |
| Tree | calling-station-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service vprn string interface string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vprn string interface string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vprn string interface string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vprn string interface string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vprn string interface string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service vprn string interface string sap string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vprn string interface string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service vprn string interface string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
agg-rate
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service vprn string interface string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service vprn string interface string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service vprn string interface string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service vprn string interface string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate number
filter
ip reference
ipv6 reference
qos
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy overrides root max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vprn string interface string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service vprn string interface string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
hs-secondary-shaper string
| Synopsis | HS Secondary Shaper | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-secondary-shaper string | |
| Tree | hs-secondary-shaper | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] reference
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] reference
| Synopsis | HS WRR group identifier | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-wrr-group reference | |
| Tree | hs-wrr-group | |
Reference | configure qos sap-egress string hs-wrr-group number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Class weight override of the WRR group | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-wrr-group reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Percent rate override applied to the HS WRR group | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-wrr-group reference percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Scheduling rate override applied to the HS WRR group | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides hs-wrr-group reference rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
|
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
| Range | 0.00 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size for the queue | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
hs-class-weight number
| Synopsis | Class weight override for the queue | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy applied to the HSQ queue group queue | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight to parent with the queue into the scheduler | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 20.10.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
Description | When configured to true, this command enables fast polling of the queue depth. Faster polling allows a more accurate view of the actual depth. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
violation-threshold decimal-number
| Synopsis | Threshold for queue depth before violation is raised | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference monitor-queue-depth violation-threshold decimal-number | |
| Tree | violation-threshold | |
Description | This command specifies the threshold for the queue MBS. When the queue depth exceeds the threshold value, a violation is registered. | |
| Range | 0.01 to 99.99 | |
| Introduced | 20.10.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service vprn string interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service vprn string interface string sap string egress qos sap-egress port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the queue group redirect list policy | |
| Context | configure service vprn string interface string sap string egress qos sap-egress port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance of port queue group | |
| Context | configure service vprn string interface string sap string egress qos sap-egress port-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vprn string interface string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service vprn string interface string sap string egress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service vprn string interface string sap string egress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vprn string interface string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-redirect-list reference
| Synopsis | Assign queue-group redirect list | |
| Context | configure service vprn string interface string sap string egress queue-group-redirect-list reference | |
| Tree | queue-group-redirect-list | |
Reference | configure qos queue-group-redirect-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vprn string interface string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vprn string interface string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vprn string interface string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vprn string interface string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vprn string interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vprn string interface string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service vprn string interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service vprn string interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-admin-state keyword
| Synopsis | Administrative state of the hosts | |
| Context | configure service vprn string interface string sap string host-admin-state keyword | |
| Tree | host-admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service vprn string interface string sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
filter
ip reference
ipv6 reference
qos
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service vprn string interface string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
overrides
root
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy overrides root max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum amount of separation buffer space | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
[priority-level] number
| Synopsis | Priority level | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space allowed | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy overrides root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vprn string interface string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Queue group template name created on forwarding plane | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress fp-redirect-group instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overrides
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv4 criteria | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides ip-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
activate-entry-tag number
| Synopsis | Tag ID activated for IPv6 criteria | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides ipv6-criteria activate-entry-tag number | |
| Tree | activate-entry-tag | |
| Range | 1 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
policer [policer-id] reference
[policer-id] reference
| Synopsis | Policer unique ID | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
mbs (number | keyword)
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides policer reference packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides policer reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
pir decimal-number
rate
| Synopsis | Enter the rate context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides policer reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
stat-mode keyword
queue [queue-id] reference
[queue-id] reference
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
pir keyword
cbs (number | keyword)
drop-tail
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
monitor-queue-depth
| Synopsis | Enable the monitor-queue-depth context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth | |
| Tree | monitor-queue-depth | |
| Introduced | 21.7.R1 | |
Platforms | All |
fast-polling boolean
| Synopsis | Enable fast polling of the queue depth | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference monitor-queue-depth fast-polling boolean | |
| Tree | fast-polling | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | All |
parent
cir-weight number
| Synopsis | CIR parameter that overrides parent for queue group | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress overrides queue reference percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
pir decimal-number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service vprn string interface string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vprn string interface string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | All |
overrides
scheduler [scheduler-name] string
[scheduler-name] string
| Synopsis | Scheduler name | |
| Context | configure service vprn string interface string sap string ingress qos scheduler-policy overrides scheduler string | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context does not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure service vprn string interface string sap string ingress qos scheduler-policy overrides scheduler string parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
rate
cir (number | keyword)
pir (number | keyword)
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vprn string interface string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-redirect-list reference
| Synopsis | Queue group redirect list | |
| Context | configure service vprn string interface string sap string ingress queue-group-redirect-list reference | |
| Tree | queue-group-redirect-list | |
Reference | configure qos queue-group-redirect-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-tunnel [tunnel-name] string
[tunnel-name] string
admin-state keyword
| Synopsis | Administrative state of the IP tunnel | |
| Context | configure service vprn string interface string sap string ip-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Backup remote IP address that is applied to this tunnel | |
| Context | configure service vprn string interface string sap string ip-tunnel string backup-remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | backup-remote-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
clear-df-bit boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Clear the Do-not-Fragment bit | |
| Context | configure service vprn string interface string sap string ip-tunnel string clear-df-bit boolean | |
| Tree | clear-df-bit | |
Description | When configured to true, the DF bit is cleared (set to 0) in all payload IP packets associated with the GRE or IPsec tunnel, before any potential fragmentation resulting from the ip-mtu command. This requires a modification of the header checksum. When configured to false, clearing of the DF bit is disabled. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
delivery-service string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Service to originate and terminate GRE packets | |
| Context | configure service vprn string interface string sap string ip-tunnel string delivery-service string | |
| Tree | delivery-service | |
Description | This command specifies the service used to originate and terminate the GRE encapsulated packets belonging to the GRE tunnel. The delivery service may be the same service that owns the private tunnel SAP associated with the GRE tunnel. The GRE tunnel does not come up until a valid delivery service is configured. | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
description string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Text description | |
| Context | configure service vprn string interface string sap string ip-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
dest-ip [dest-ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
[dest-ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the remote IP tunnel endpoint | |
| Context | configure service vprn string interface string sap string ip-tunnel string dest-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | dest-ip | |
Description | This command configures the IP address of the remote IP tunnel endpoint. If the remote IP address is not within the subnet of the IP interface associated with the tunnel, the tunnel fails to come up. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dscp keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Differentiated Services Code Point (DSCP) name | |
| Context | configure service vprn string interface string sap string ip-tunnel string dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
encapsulated-ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum size of the encapsulated tunnel packet | |
| Context | configure service vprn string interface string sap string ip-tunnel string encapsulated-ip-mtu number | |
| Tree | encapsulated-ip-mtu | |
Description | This command specifies the maximum size of the encapsulated tunnel packet for the IP tunnel. If the packet exceeds this value, the system fragments the packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gre-header
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the gre-header context | |
| Context | configure service vprn string interface string sap string ip-tunnel string gre-header | |
| Tree | gre-header | |
| Introduced | 16.0.R1 | |
Platforms | All | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the GRE header in the tunnel | |
| Context | configure service vprn string interface string sap string ip-tunnel string gre-header admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All | |
key
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the keys in the GRE header | |
| Context | configure service vprn string interface string sap string ip-tunnel string gre-header key admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All | |
receive number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Receive key of the GRE header | |
| Context | configure service vprn string interface string sap string ip-tunnel string gre-header key receive number | |
| Tree | receive | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
send number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send key of the GRE header | |
| Context | configure service vprn string interface string sap string ip-tunnel string gre-header key send number | |
| Tree | send | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
icmp-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp-generation context | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp-generation | |
| Tree | icmp-generation | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
frag-required
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the frag-required context | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp-generation frag-required | |
| Tree | frag-required | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send fragmentation required messages | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp-generation frag-required admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 21.5.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum interval that the ICMP messages can be sent | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp-generation frag-required interval number | |
| Tree | interval | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMP messages sent | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp-generation frag-required message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of ICMP messages that can be sent during the period specified by the interval command. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 21.5.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
icmp6-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp6-generation context | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp6-generation | |
| Tree | icmp6-generation | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
packet-too-big
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the packet-too-big context | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp6-generation packet-too-big | |
| Tree | packet-too-big | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of sending Packet Too Big messages | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp6-generation packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
number number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of PTB ICMPv6 messages that can be sent | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp6-generation packet-too-big number number | |
| Tree | number | |
Description | This command configures the maximum number of ICMPv6 messages that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
seconds number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum interval when PTB messages can be sent | |
| Context | configure service vprn string interface string sap string ip-tunnel string icmp6-generation packet-too-big seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IP MTU for the interface | |
| Context | configure service vprn string interface string sap string ip-tunnel string ip-mtu number | |
| Tree | ip-mtu | |
Description | This command specifies the IP MTU for the interface. If the DF bit is not set in the packet, IP packet fragmentation is performed, if necessary, based on this configured value. When unconfigured, all IP packets, regardless of the packet size or DF bit setting, are allowed into the tunnel without fragmentation. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipsec-transport-mode-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec transport mode profile name | |
| Context | configure service vprn string interface string sap string ip-tunnel string ipsec-transport-mode-profile reference | |
| Tree | ipsec-transport-mode-profile | |
Reference | configure ipsec ipsec-transport-mode-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local IP address of this tunnel | |
| Context | configure service vprn string interface string sap string ip-tunnel string local-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-ip-address | |
Description | This command specifies the local IP address to use for the IP tunnel. This configuration applies to the outer IP header of the encapsulated packets. The address must belong to one of the IP subnets associated with the public SAP interface of the tunnel group. The source IP address, the remote IP address, and the backup remote IP address of a tunnel must all belong to the same address family (IPv4 or IPv6). When this command specifies an IPv6 address, it must be a global unicast address. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
pmtu-discovery-aging number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Time to age out the learned path MTU | |
| Context | configure service vprn string interface string sap string ip-tunnel string pmtu-discovery-aging number | |
| Tree | pmtu-discovery-aging | |
Description | This command configures the temporary public MTU expiration time. The temporary public MTU is used for MTU propagation. | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
private-tcp-mss-adjust number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP Maximum Segment Size (MSS) on the private side | |
| Context | configure service vprn string interface string sap string ip-tunnel string private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
Description | This command specifies the TCP MSS to adjust for tunnels on the private side. The value is used to adjust the TCP MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv4 hosts | |
| Context | configure service vprn string interface string sap string ip-tunnel string propagate-pmtu-v4 boolean | |
| Tree | propagate-pmtu-v4 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v6 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of path MTU to IPv6 hosts | |
| Context | configure service vprn string interface string sap string ip-tunnel string propagate-pmtu-v6 boolean | |
| Tree | propagate-pmtu-v6 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
public-tcp-mss-adjust (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP Maximum Segment Size (MSS) on the public side | |
| Context | configure service vprn string interface string sap string ip-tunnel string public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
Description | This command specifies the TCP MSS for TCP traffic sent from the public network to the private network. The value is used to adjust the TCP MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
reassembly (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum reassembly wait time | |
| Context | configure service vprn string interface string sap string ip-tunnel string reassembly (number | keyword) | |
| Tree | reassembly | |
Description | This command configures the maximum time to wait to receive all fragments of a particular IPsec or GRE packet for reassembly. | |
| Range | 1 to 5000 | |
| Units | milliseconds | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remote IP address of the tunnel | |
| Context | configure service vprn string interface string sap string ip-tunnel string remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | remote-ip-address | |
| Introduced | 16.0.R1 | |
Platforms | All | |
ipsec-gateway [name] string
| Synopsis | Enter the ipsec-gateway list instance | |
| Context | configure service vprn string interface string sap string ipsec-gateway string | |
| Tree | ipsec-gateway | |
| Max. Instances | 1 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | IPsec gateway name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string | |
| Tree | ipsec-gateway | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec gateway | |
| Context | configure service vprn string interface string sap string ipsec-gateway string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
cert
cert-profile reference
| Synopsis | Certificate profile name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert cert-profile reference | |
| Tree | cert-profile | |
Reference | configure ipsec cert-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
status-verify
| Synopsis | Enter the status-verify context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert status-verify | |
| Tree | status-verify | |
Description | Commands in this context configure certificate revocation status verification. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-result keyword
| Synopsis | Default result of Certificate Status Verification (CSV) | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert status-verify default-result keyword | |
| Tree | default-result | |
Description | This command specifies the default result when both the primary and secondary methods fail to provide an answer. | |
| Options | ||
| Default | revoked | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
primary keyword
| Synopsis | Primary method of CSV to verify the revocation status | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert status-verify primary keyword | |
| Tree | primary | |
| Options | ||
| Default | crl | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
secondary keyword
| Synopsis | Secondary method of CSV to verify the revocation status | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert status-verify secondary keyword | |
| Tree | secondary | |
| Options | ||
| Default | none | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
trust-anchor-profile reference
| Synopsis | Trust anchor profile name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string cert trust-anchor-profile reference | |
| Tree | trust-anchor-profile | |
Reference | configure ipsec trust-anchor-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
client-db
| Synopsis | Enable the client-db context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string client-db | |
| Tree | client-db | |
Description | Commands in this context configure the IPsec client database. The client database is used to authenticate the IKEv2 dynamic LAN-to-LAN tunnel. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fallback boolean
| Synopsis | Fall back to the default authentication policy | |
| Context | configure service vprn string interface string sap string ipsec-gateway string client-db fallback boolean | |
| Tree | fallback | |
Description | When configured to true, this command specifies whether the IPsec gateway can fall back to the default authentication policy when the IPsec tunnel authentication request fails to match any clients in the IPsec database. When configured to false and the client database lookup fails to return a matched result, the system fails the tunnel setup. | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name reference
default-secure-service
| Synopsis | Enable the default-secure-service context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string default-secure-service | |
| Tree | default-secure-service | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Private IPsec tunnel interface name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string default-secure-service interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
service-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default security service name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string default-secure-service service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
default-tunnel-template reference
| Synopsis | Default tunnel policy template for the gateway | |
| Context | configure service vprn string interface string sap string ipsec-gateway string default-tunnel-template reference | |
| Tree | default-tunnel-template | |
Reference | configure ipsec tunnel-template number | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp-address-assignment
| Synopsis | Enter the dhcp-address-assignment context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment | |
| Tree | dhcp-address-assignment | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcpv4
| Synopsis | Enable the dhcpv4 context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 | |
| Tree | dhcpv4 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec DHCPv4 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Gateway IP address of DHCPv4 packets sent by the system | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 gi-address string | |
| Tree | gi-address | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
send-release boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send DHCPv4 release message when IPsec tunnel removed | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 send-release boolean | |
| Tree | send-release | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the server context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server | |
| Tree | server | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DHCPv4 server addresses | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server address string | |
| Tree | address | |
Description | This command specifies DHCPv4 server addresses for the DHCPv4-based address assignment. If multiple server addresses are specified, the first advertised DHCPv4 address received is chosen. | |
| Max. Instances | 8 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance used to reach the DHCPv4 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv4 server router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcpv6
| Synopsis | Enable the dhcpv6 context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 | |
| Tree | dhcpv6 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Link address of the relayed DHCPv6 packets | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 link-address string | |
| Tree | link-address | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
send-release boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send DHCPv6 release message when IPsec tunnel removed | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 send-release boolean | |
| Tree | send-release | |
| Default | true | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the server context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server | |
| Tree | server | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
address string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | DHCPv6 server addresses | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server address string | |
| Tree | address | |
Description | This command specifies DHCPv6 server addresses for the DHCPv6-based address assignment. If multiple server addresses are specified, the first advertised DHCPv6 address received is chosen. | |
| Max. Instances | 8 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance to reach the DHCPv6 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string dhcp-address-assignment dhcpv6 server router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ike-policy reference
| Synopsis | IKE policy ID | |
| Context | configure service vprn string interface string sap string ipsec-gateway string ike-policy reference | |
| Tree | ike-policy | |
Reference | configure ipsec ike-policy number | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
local
address-assignment
| Synopsis | Enable the address-assignment context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment | |
| Tree | address-assignment | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of local address assignments | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the ipv4 context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcp-server string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local DHCPv4 server name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv4 dhcp-server string | |
| Tree | dhcp-server | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the pool defined in the specified DHCPv4 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv4 pool string | |
| Tree | pool | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance ID for the local DHCPv4 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv4 router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
secondary-pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the secondary pool defined in the DHCPv4 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv4 secondary-pool string | |
| Tree | secondary-pool | |
| String Length | 1 to 32 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the ipv6 context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dhcp-server string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local DHCPv6 server name | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv6 dhcp-server string | |
| Tree | dhcp-server | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pool string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Secondary pool name defined in the DHCPv6 server | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv6 pool string | |
| Tree | pool | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance ID hosting the DHCPv6 connection | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local address-assignment ipv6 router-instance string | |
| Tree | router-instance | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local gateway address of the IPsec gateway | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
id
| Synopsis | Enter the id context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local id | |
| Tree | id | |
Description | Commands in this context specify the local ID used for the Identification Indicator (IDi) or Identification Responder (IDr) in the IKEv2 tunnel. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
auto
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Select ID based on authentication method in IKE policy | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local id auto | |
| Tree | auto | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
fqdn string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FQDN as the local ID type | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local id fqdn string | |
| Tree | fqdn | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv4 string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 address as the local ID type | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local id ipv4 string | |
| Tree | ipv4 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 address as the local ID type | |
| Context | configure service vprn string interface string sap string ipsec-gateway string local id ipv6 (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ipv6 | |
Notes | The following elements are part of a choice: auto, fqdn, ipv4, or ipv6. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-history-key-records
| Synopsis | Enter the max-history-key-records context | |
| Context | configure service vprn string interface string sap string ipsec-gateway string max-history-key-records | |
| Tree | max-history-key-records | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
esp number
| Synopsis | Maximum number of recent records | |
| Context | configure service vprn string interface string sap string ipsec-gateway string max-history-key-records esp number | |
| Tree | esp | |
| Range | 1 to 48 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ike number
| Synopsis | Maximum number of historical IKE keys recorded | |
| Context | configure service vprn string interface string sap string ipsec-gateway string max-history-key-records ike number | |
| Tree | ike | |
| Range | 1 to 3 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pre-shared-key string
| Synopsis | Pre-shared key for the IPsec gateway | |
| Context | configure service vprn string interface string sap string ipsec-gateway string pre-shared-key string | |
| Tree | pre-shared-key | |
| String Length | 1 to 115 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
radius
accounting-policy reference
| Synopsis | RADIUS accounting policy | |
| Context | configure service vprn string interface string sap string ipsec-gateway string radius accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure ipsec radius accounting-policy string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service vprn string interface string sap string ipsec-gateway string radius authentication-policy reference | |
| Tree | authentication-policy | |
Reference | configure ipsec radius authentication-policy string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ts-list reference
ipsec-tunnel [name] string
| Synopsis | Enter the ipsec-tunnel list instance | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | IPsec tunnel name | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the IPsec tunnel | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bfd
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the bfd context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd | |
| Tree | bfd | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
bfd-designate boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Designate IPsec tunnel to carry BFD traffic | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd bfd-designate boolean | |
| Tree | bfd-designate | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
bfd-liveness
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd bfd-liveness | |
| Tree | bfd-liveness | |
Description | Commands in this context configure a BFD session to provide a heart-beat mechanism for a specified IPsec tunnel. There can be only one BFD session assigned to any given IPsec tunnel, but there can be multiple IPsec tunnels using the same BFD session. BFD controls the state of the association tunnel. If the BFD session goes down, the system brings down the associated non-designated IPsec tunnel. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dest-ip string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination address used for the BFD session | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
interface string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface used by the BFD session | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd bfd-liveness interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
service-name string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string bfd bfd-liveness service-name string | |
| Tree | service-name | |
Description | This command configures the name of the service where BFD traffic is forwarded to. | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
clear-df-bit boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Reset the DF bit to 0 in all payload IP packets | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string clear-df-bit boolean | |
| Tree | clear-df-bit | |
Description | When configured to true, the DF bit is set to 0 in all payload IP packets associated with the IPsec tunnel, before any potential fragmentation occurs. | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
copy-traffic-class-upon-decapsulation boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable traffic class copy upon decapsulation | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string copy-traffic-class-upon-decapsulation boolean | |
| Tree | copy-traffic-class-upon-decapsulation | |
Description | When configured to true, the system copies the traffic class from the outer tunnel IP packet header to the payload IP packet header in the decapsulating direction (public to private). | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dest-ip [address] (ipv4-address-no-zone | ipv6-address-no-zone)
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Private IP address of the remote IP tunnel endpoint | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string dest-ip (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | dest-ip | |
Notes | This element is part of a list key. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encapsulated-ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum size of the encapsulated tunnel packet | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string encapsulated-ip-mtu number | |
| Tree | encapsulated-ip-mtu | |
Description | This command specifies the maximum size of the encapsulated tunnel packet to the IPsec tunnel, the IP tunnel, or the dynamic tunnels terminated on the IPsec Gateway. If the encapsulated IPv4 or IPv6 tunnel packet exceeds this value, the system fragments the packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 19.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
icmp-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp-generation context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp-generation | |
| Tree | icmp-generation | |
Description | Commands in this context configure settings for ICMPv4 message generation. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
frag-required
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the frag-required context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp-generation frag-required | |
| Tree | frag-required | |
Description | Commands in this context configure the attributes for sending generated ICMP Destination Unreachable "fragmentation needed and DF set" messages (type 3, code 4) back to the source, if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of sending ICMP messages | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp-generation frag-required admin-state keyword | |
| Tree | admin-state | |
Description | This command configures the administrative state of sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) messages to the source if the received size of the IPv4 packet on the private side exceeds the private MTU size. | |
| Options | ||
| Default | enable | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending ICMP messages | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp-generation frag-required interval number | |
| Tree | interval | |
Description | This command configures the interval for sending ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4). | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMP messages that can be sent | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp-generation frag-required message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of ICMP Destination Unreachable "fragmentation needed, DF set" messages (type 3, code 4) that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 21.5.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
icmp6-generation
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the icmp6-generation context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp6-generation | |
| Tree | icmp6-generation | |
Description | Commands in this context configure settings for ICMPv6 message generation. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
packet-too-big
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the packet-too-big context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp6-generation packet-too-big | |
| Tree | packet-too-big | |
Description | Commands in this context configure the parameters to send ICMPv6 PTB (Packet Too Big) messages on the private side. The system sends PTB messages if a received IPv6 packet on the private side is greater than 1280 bytes and it exceeds the private MTU of the tunnel. The private MTU for the tunnel is configured via the configure router interface ipsec ipsec-tunnel ip-mtu command for the interface. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of Packet Too Big message sends | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp6-generation packet-too-big admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
interval number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Interval for sending Packet Too Big messages | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp6-generation packet-too-big interval number | |
| Tree | interval | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
message-count number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of ICMPv6 PTB messages that can be sent | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string icmp6-generation packet-too-big message-count number | |
| Tree | message-count | |
Description | This command configures the maximum number of PTB messages that can be sent during the configured interval. | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 19.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ip-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Private MTU of the IPsec tunnel | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string ip-mtu number | |
| Tree | ip-mtu | |
Description | This command specifies the private MTU of the IPsec tunnel. The private MTU is used to determine the need for fragmentation before encapsulation of the payload packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 19.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
key-exchange
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the key-exchange context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange | |
| Tree | key-exchange | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
dynamic
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the dynamic context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic | |
| Tree | dynamic | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
auto-establish boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Attempt to establish a phase 1 exchange automatically | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic auto-establish boolean | |
| Tree | auto-establish | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
cert
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the cert context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert | |
| Tree | cert | |
Description | Commands in this context configure the attributes of the dynamic keying certificate. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
cert-profile reference
| Synopsis | Certificate profile name | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert cert-profile reference | |
| Tree | cert-profile | |
Reference | configure ipsec cert-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
status-verify
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the status-verify context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert status-verify | |
| Tree | status-verify | |
Description | Commands in this context configure attributes of Certificate Status Verification (CSV). | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
default-result keyword
| Synopsis | Default result for Certificate Status Verification | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert status-verify default-result keyword | |
| Tree | default-result | |
Description | This command specifies the default certificate revocation status result to use when all configured CSV methods fail to return a result. | |
| Options | ||
| Default | revoked | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
primary keyword
| Synopsis | Primary method of CSV to verify the revocation status | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert status-verify primary keyword | |
| Tree | primary | |
Description | This command configures the primary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the certificate of the peer. | |
| Options | ||
| Default | crl | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
secondary keyword
| Synopsis | Secondary method used to verify certificate revocation | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert status-verify secondary keyword | |
| Tree | secondary | |
Description | This command specifies the secondary method of Certificate Status Verification (CSV) that is used to verify the revocation status of the peer certificate. | |
| Options | ||
| Default | none | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
trust-anchor-profile reference
| Synopsis | Trust anchor profile name | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic cert trust-anchor-profile reference | |
| Tree | trust-anchor-profile | |
Reference | configure ipsec trust-anchor-profile string | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
id
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the id context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic id | |
| Tree | id | |
Description | Commands in this context specify the local ID used for IDi or IDr for IKEv2 negotiation. The default behavior depends on the local authentication method as follows:
| |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
fqdn string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FQDN used as the local ID IKE type | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic id fqdn string | |
| Tree | fqdn | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv4 string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 as the local ID type | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic id ipv4 string | |
| Tree | ipv4 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6 (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 used as the local IKE ID type | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic id ipv6 (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | ipv6 | |
Notes | The following elements are part of a choice: fqdn, ipv4, or ipv6. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ike-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IKE policy ID | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic ike-policy reference | |
| Tree | ike-policy | |
Description | This command specifies the ID of the IKE policy used for IKE negotiation. The ipsec-transport-mode-profile configuration only supports IKEv2. | |
Reference | configure ipsec ike-policy number | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipsec-transform reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec transform IDs used by the dynamic key | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic ipsec-transform reference | |
| Tree | ipsec-transform | |
Description | This command specifies IPsec transform IDs used for CHILD_SA negotiation. | |
Reference | configure ipsec ipsec-transform number | |
| Max. Instances | 4 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pre-shared-key string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Pre-shared key for authentication | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange dynamic pre-shared-key string | |
| Tree | pre-shared-key | |
| String Length | 1 to 115 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
manual
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the manual context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual | |
| Tree | manual | |
Notes | The following elements are part of a choice: dynamic or manual. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
keys [security-association] number direction keyword
| Synopsis | Enter the keys list instance | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
Description | Commands in this context configure the security association list for the tunnel. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[security-association] number
| Synopsis | SA entry ID | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
direction keyword
| Synopsis | Direction of the IPsec tunnel | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword | |
| Tree | keys | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the authentication algorithm | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 130 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
encryption-key string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Key used for the encryption algorithm | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword encryption-key string | |
| Tree | encryption-key | |
| String Length | 1 to 66 | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipsec-transform reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Transform entry used by manual SAs | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword ipsec-transform reference | |
| Tree | ipsec-transform | |
Reference | configure ipsec ipsec-transform number | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
spi number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | SPI of inbound and outbound packets | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string key-exchange manual keys number direction keyword spi number | |
| Tree | spi | |
Description | This command specifies the Security Parameter Index (SPI) used to look up the instruction to verify and decrypt the incoming IPsec packets when the direction is inbound. When the direction is outbound, the SPI is used in the encoding of the outgoing packets. The remote node can use the SPI to look up the instruction to verify and decrypt the packet. | |
| Range | 256 to 16383 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-history-key-records
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the max-history-key-records context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string max-history-key-records | |
| Tree | max-history-key-records | |
Description | Commands in this context configure the settings for recording historical IPsec keys. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
esp number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of recent records | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string max-history-key-records esp number | |
| Tree | esp | |
| Range | 1 to 48 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ike number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of historical IKE key records | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string max-history-key-records ike number | |
| Tree | ike | |
| Range | 1 to 3 | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
pmtu-discovery-aging number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Aging out time of the learned path MTU | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string pmtu-discovery-aging number | |
| Tree | pmtu-discovery-aging | |
Description | This command configures the temporary public and private MTU expiration time. The temporary MTU is used for MTU propagation. | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
private-tcp-mss-adjust number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) adjustment | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
Description | This command specifies the TCP MSS to adjust for the tunnel on the private side. When configured, the system may use the value to update the MSS option in the received TCP SYN packet on the private side. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Introduced | 19.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv4 hosts | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string propagate-pmtu-v4 boolean | |
| Tree | propagate-pmtu-v4 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv4 hosts). | |
| Default | true | |
| Introduced | 21.5.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
propagate-pmtu-v6 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable propagation of the path MTU to IPv6 hosts | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string propagate-pmtu-v6 boolean | |
| Tree | propagate-pmtu-v6 | |
Description | When configured to true, the system propagates the path MTU learned from the public side to the private side (IPv6 hosts). | |
| Default | true | |
| Introduced | 21.5.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
public-tcp-mss-adjust (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TCP maximum segment size (MSS) on the public network | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
Description | This command configures the MSS for the TCP traffic in an IPsec tunnel that is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet. | |
| Range | 512 to 9000 | |
| Units | bytes | |
| Options | ||
| Introduced | 19.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
replay-window number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Anti-replay window size | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string replay-window number | |
| Tree | replay-window | |
Description | This command specifies the size of an IPsec anti-replay window. If unconfigured, IPsec anti-replay is disabled. | |
| Range | 32 | 64 | 128 | 256 | 512 | |
| Units | packets | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
security-policy
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the security-policy context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string security-policy | |
| Tree | security-policy | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
id reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPsec security policy ID | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string security-policy id reference | |
| Tree | id | |
Reference | configure service vprn string ipsec security-policy number | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
strict-match boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable strict match of the security policy entry | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string security-policy strict-match boolean | |
| Tree | strict-match | |
Description | When configured to true, this command enables strict match of the security policy entry. When a CREATE_CHILD exchange request is received for a static IPsec tunnel, and this request is not a rekey request, ISA matches the received TSi and TSr with the configured security policy. This can be a match only when a received TS (in TSi or TSr) address range matches exactly with the subnet in a security policy entry. If there is no match, the setup fails, and TS_UNACCEPTABLE is sent. If there is a match, but there is an existing CHILD_SA for the matched security policy, the setup fails, and NO_PROPOSAL_CHOSEN is sent. If there is a match, and there is not a CHILD_SA for the matched entry, the subnet is sent in the matched security policy entry as TSi and TSr, and the CHILD_SA is created. | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
tunnel-endpoint
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the tunnel-endpoint context | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string tunnel-endpoint | |
| Tree | tunnel-endpoint | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
delivery-service string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Delivery service name | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string tunnel-endpoint delivery-service string | |
| Tree | delivery-service | |
| String Length | 1 to 64 | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
local-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Address used for tunnel of the remote security gateway | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string tunnel-endpoint local-gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | local-gateway-address | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remote IP address of this tunnel. | |
| Context | configure service vprn string interface string sap string ipsec-tunnel string tunnel-endpoint remote-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | remote-ip-address | |
Notes | This element is mandatory. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
lag
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service vprn string interface string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service vprn string interface string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | All |
class number
weight number
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service vprn string interface string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-host
| Synopsis | Enter the static-host context | |
| Context | configure service vprn string interface string sap string static-host | |
| Tree | static-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4 [ip] string mac string
[ip] string
mac string
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service vprn string interface string sap string static-host ipv4 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service vprn string interface string sap string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service vprn string interface string sap string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service vprn string interface string sap string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
shcv-policy-ipv4 reference
| Synopsis | Host connectivity IPv4 policy | |
| Context | configure service vprn string interface string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
aarp
id reference
type keyword
accounting-policy reference
| Synopsis | Policy to collect accounting statistics | |
| Context | configure service vprn string interface string spoke-sdp string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service vprn string interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
app-profile reference
| Synopsis | Application profile name for this SDP | |
| Context | configure service vprn string interface string spoke-sdp string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
bfd
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string interface string spoke-sdp string bfd bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 21.2.R1 | |
Platforms | All |
encap keyword
bfd-template reference
| Synopsis | BFD template associated with the SDP binding | |
| Context | configure service vprn string interface string spoke-sdp string bfd bfd-template reference | |
| Tree | bfd-template | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
Reference | configure bfd bfd-template string | |
| Introduced | 21.2.R1 | |
Platforms | All |
failure-action keyword
| Synopsis | VCCV BFD action taken on the SDP binding | |
| Context | configure service vprn string interface string spoke-sdp string bfd failure-action keyword | |
| Tree | failure-action | |
Description | This command configures a named BFD template to be used by VCCV BFD on PWs belonging to the VLL service. The template specifies parameters, such as the minimum transmit and receive control packet timer intervals, used by the BFD session. Template parameters are configured under the configure router bfd context. | |
| Options | ||
| Default | none | |
| Introduced | 21.2.R1 | |
Platforms | All |
wait-for-up-timer number
| Synopsis | Time waited for BFD up status | |
| Context | configure service vprn string interface string spoke-sdp string bfd wait-for-up-timer number | |
| Tree | wait-for-up-timer | |
Description | This command configures the time interval that is used to wait for a BFD session to come up. This command is triggered when a spoke-SDP is first administratively enabled and a VCCV BFD session transitions from up to down. The command is required to allow time for BFD sessions to come up, and for BFD to settle before selecting the active spoke-SDP for use in a redundant set. In the case where a VCCV BFD session is bouncing, the timer prevents excessive flapping of the operational state of a spoke-SDP. | |
| Range | 1 to 60 | |
| Units | seconds | |
| Introduced | 21.2.R1 | |
Platforms |
All |
collect-stats boolean
| Synopsis | Allow agent to collect accounting statistics | |
| Context | configure service vprn string interface string spoke-sdp string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service vprn string interface string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vprn string interface string spoke-sdp string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
filter
ip reference
ipv6 reference
qos
network
policy-name reference
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure service vprn string interface string spoke-sdp string egress qos network port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the egress port queue group | |
| Context | configure service vprn string interface string spoke-sdp string egress qos network port-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service vprn string interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
entropy-label
| Synopsis | Enable the use of entropy labels for spoke SDPs | |
| Context | configure service vprn string interface string spoke-sdp string entropy-label | |
| Tree | entropy-label | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
eth-cfm
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm boolean
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
csf
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vprn string interface string spoke-sdp string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
hash-label
| Synopsis | Enable the hash-label context | |
| Context | configure service vprn string interface string spoke-sdp string hash-label | |
| Tree | hash-label | |
Description | Commands in this context configure the use of hash labels for egress datapaths. For information about hash-label handling, see the "Hash labels" section of the 7450 ESS, 7750 SR, 7950 XRS, and VSR MPLS Guide. | |
Notes | The following elements are part of a choice: entropy-label or hash-label. | |
| Introduced | 16.0.R1 | |
Platforms | All |
signal-capability
| Synopsis | Signal hash label capability to the remote PE | |
| Context | configure service vprn string interface string spoke-sdp string hash-label signal-capability | |
| Tree | signal-capability | |
Description | When configured, this command enables the signaling and negotiating of the hash label between the local and remote PE nodes. The signaling process outcome determines whether the local PE inserts the hash label on the user packets. This outcome can override the local PE configuration. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
filter
ip reference
ipv6 reference
qos
network
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure service vprn string interface string spoke-sdp string ingress qos network fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-name reference
| Synopsis | Name of the forwarding plane queue group template | |
| Context | configure service vprn string interface string spoke-sdp string ingress qos network fp-redirect-group group-name reference | |
| Tree | group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
policy-name reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service vprn string interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
transit-policy
| Synopsis | Enable the transit-policy context | |
| Context | configure service vprn string interface string spoke-sdp string transit-policy | |
| Tree | transit-policy | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP transit policy ID | |
| Context | configure service vprn string interface string spoke-sdp string transit-policy ip reference | |
| Tree | ip | |
Reference | configure application-assurance group number partition number transit-ip-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP prefix policy ID | |
| Context | configure service vprn string interface string spoke-sdp string transit-policy prefix reference | |
| Tree | prefix | |
Reference | configure application-assurance group number partition number transit-prefix-policy number | |
Notes | The following elements are part of a mandatory choice: ip or prefix. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vc-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Type of virtual circuit (VC) associated with the SDP binding | |
| Context | configure service vprn string interface string spoke-sdp string vc-type keyword | |
| Tree | vc-type | |
| Options | ||
| Default | ether | |
| Introduced | 16.0.R1 | |
Platforms | All | |
static-tunnel-redundant-nexthop string
| Synopsis | Address for the static ISA tunnel redundant next-hop | |
| Context | configure service vprn string interface string static-tunnel-redundant-nexthop string | |
| Tree | static-tunnel-redundant-nexthop | |
Description | This command specifies the redundant next-hop address on public or private IPsec interfaces (with a public or private tunnel SAP) for the static IPsec tunnel. The next-hop address is resolved in the routing table of the corresponding service. | |
Notes | The following elements are part of a choice: multi-chassis-shunting-profile or (dynamic-tunnel-redundant-nexthop and static-tunnel-redundant-nexthop). | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tos-marking-state keyword
| Synopsis | TOS marking state | |
| Context | configure service vprn string interface string tos-marking-state keyword | |
| Tree | tos-marking-state | |
| Options | ||
| Default | trusted | |
| Introduced | 16.0.R1 | |
Platforms | All |
tunnel boolean
vas-if-type keyword
| Synopsis | VAS interface type | |
| Context | configure service vprn string interface string vas-if-type keyword | |
| Tree | vas-if-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
vpls [vpls-name] string
[vpls-name] string
egress
reclassify-using-qos reference
| Synopsis | Egress QoS policy | |
| Context | configure service vprn string interface string vpls string egress reclassify-using-qos reference | |
| Tree | reclassify-using-qos | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | All |
routed-override-filter
| Synopsis | Enter the routed-override-filter context | |
| Context | configure service vprn string interface string vpls string egress routed-override-filter | |
| Tree | routed-override-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service vprn string interface string vpls string egress routed-override-filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | All |
evpn
arp
advertise [route-type] keyword
| Synopsis | Enter the advertise list instance | |
| Context | configure service vprn string interface string vpls string evpn arp advertise keyword | |
| Tree | advertise | |
Description | Commands in this context specify the configuration to allow ARP or ND entries that are installed in the ARP or ND cache to be advertised in EVPN MAC/IP routes. The learn-dynamic command must be set to false when using this functionality. | |
| Introduced | 19.10.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service vprn string interface string vpls string evpn arp advertise keyword | |
| Tree | advertise | |
Description | This command specifies the type of ARP or ND entries that are installed in the ARP or ND cache into EVPN MAC/IP routes. | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 19.10.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service vprn string interface string vpls string evpn arp advertise keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added separately to dynamic or static ARP or ND entries that are advertised in EVPN MAC/IP routes. This tag can be matched on BGP vsi-export (in the R-VPLS) and BGP peer export policies. | |
| Range | 0 to 255 | |
| Introduced | 19.10.R1 | |
|
Platforms | All | |
flood-garp-and-unknown-req boolean
| Synopsis | Allow CPM originated ARP frames to flood R-VPLS service | |
| Context | configure service vprn string interface string vpls string evpn arp flood-garp-and-unknown-req boolean | |
| Tree | flood-garp-and-unknown-req | |
Description | When configured to true, the system allows CPM-originated ARP frames to be flooded in the R-VPLS service. Any frames that are data path flooded such as the ARP messages received on a SAP, are flooded irrespective of this command. When configured to false, CPM-originated ARP flooding is suppressed. | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
learn-dynamic boolean
| Synopsis | Process ARP or ND messages on EVPN tunnels | |
| Context | configure service vprn string interface string vpls string evpn arp learn-dynamic boolean | |
| Tree | learn-dynamic | |
Description | When configured to true, the system processes ARP or ND messages that arrive on EVPN tunnels. When configured to false, learning is disabled and table entries are not created for these messages. | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
nd
advertise [route-type] keyword
| Synopsis | Enter the advertise list instance | |
| Context | configure service vprn string interface string vpls string evpn nd advertise keyword | |
| Tree | advertise | |
Description | Commands in this context specify the configuration to allow ARP or ND entries that are installed in the ARP or ND cache to be advertised in EVPN MAC/IP routes. The learn-dynamic command must be set to false when using this functionality. | |
| Introduced | 20.5.R1 | |
Platforms | All |
[route-type] keyword
| Synopsis | Type of ARP or ND entries that generate host routes | |
| Context | configure service vprn string interface string vpls string evpn nd advertise keyword | |
| Tree | advertise | |
Description | This command specifies the type of ARP or ND entries that are installed in the ARP or ND cache into EVPN MAC/IP routes. | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 20.5.R1 | |
Platforms | All |
route-tag number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Tag value used with the host route from an ARP/ND entry | |
| Context | configure service vprn string interface string vpls string evpn nd advertise keyword route-tag number | |
| Tree | route-tag | |
Description | This command specifies the route tag that is added separately to dynamic or static ARP or ND entries that are advertised in EVPN MAC/IP routes. This tag can be matched on BGP vsi-export (in the R-VPLS) and BGP peer export policies. | |
| Range | 0 to 255 | |
| Introduced | 20.5.R1 | |
|
Platforms | All | |
learn-dynamic boolean
| Synopsis | Process ARP or ND messages on EVPN tunnels | |
| Context | configure service vprn string interface string vpls string evpn nd learn-dynamic boolean | |
| Tree | learn-dynamic | |
Description | When configured to true, the system processes ARP or ND messages that arrive on EVPN tunnels. When configured to false, learning is disabled and table entries are not created for these messages. | |
| Default | true | |
| Introduced | 20.5.R1 | |
|
Platforms | All |
evpn-tunnel
| Synopsis | Enable the evpn-tunnel context | |
| Context | configure service vprn string interface string vpls string evpn-tunnel | |
| Tree | evpn-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-bfd boolean
ipv6-gateway-address keyword
| Synopsis | Type of IPv6 gateway address | |
| Context | configure service vprn string interface string vpls string evpn-tunnel ipv6-gateway-address keyword | |
| Tree | ipv6-gateway-address | |
| Options | ||
| Default | ip | |
| Introduced | 16.0.R4 | |
Platforms | All |
supplementary-broadcast-domain boolean
| Synopsis | Use the EVPN tunnel as a Supplementary Broadcast Domain | |
| Context | configure service vprn string interface string vpls string evpn-tunnel supplementary-broadcast-domain boolean | |
| Tree | supplementary-broadcast-domain | |
Description | When configured to true, this command allows the EVPN tunnel to be used as a Supplementary Broadcast Domain (SBD). The SBD is used in EVPN OISM to advertise the SMET routes and to receive the multicast traffic on egress PEs that are not attached to the source R-VPLS service. When configured to false, this command disables EVPN tunnel use as an SBD. | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
ingress
routed-override-filter
| Synopsis | Enter the routed-override-filter context | |
| Context | configure service vprn string interface string vpls string ingress routed-override-filter | |
| Tree | routed-override-filter | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service vprn string interface string vpls string ingress routed-override-filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-mirror-interface [interface-name] string
| Synopsis | Enter the ip-mirror-interface list instance | |
| Context | configure service vprn string ip-mirror-interface string | |
| Tree | ip-mirror-interface | |
| Introduced | 16.0.R1 | |
Platforms | All |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service vprn string ip-mirror-interface string | |
| Tree | ip-mirror-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string ip-mirror-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string ip-mirror-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
spoke-sdp [sdp-bind-id] string
| Synopsis | Enter the spoke-sdp list instance | |
| Context | configure service vprn string ip-mirror-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[sdp-bind-id] string
| Synopsis | SDP binding ID | |
| Context | configure service vprn string ip-mirror-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service vprn string ip-mirror-interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string ip-mirror-interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Spoke SDP ingress VC label | |
| Context | configure service vprn string ip-mirror-interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
ipsec
allow-reverse-route-override-type keyword
| Synopsis | System behavior for new reverse route | |
| Context | configure service vprn string ipsec allow-reverse-route-override-type keyword | |
| Tree | allow-reverse-route-override-type | |
Description | This command specifies the system behavior when a new reverse route overlaps with an existing reverse route. When unconfigured, the system does not allow a new dynamic LAN-to-LAN tunnel that terminates in the private VPRN service to be created with an overlapping reverse route. | |
| Options | ||
| Introduced | 20.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
multi-chassis-shunt-interface [name] reference
| Synopsis | Enter the multi-chassis-shunt-interface list instance | |
| Context | configure service vprn string ipsec multi-chassis-shunt-interface reference | |
| Tree | multi-chassis-shunt-interface | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] reference
| Synopsis | Multi-chassis shunt interface name | |
| Context | configure service vprn string ipsec multi-chassis-shunt-interface reference | |
| Tree | multi-chassis-shunt-interface | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
next-hop
| Synopsis | Enter the next-hop context | |
| Context | configure service vprn string ipsec multi-chassis-shunt-interface reference next-hop | |
| Tree | next-hop | |
Description | Commands in this context configure the next hop for shunting over the interface. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
address (ipv4-address-no-zone | ipv6-address-no-zone)
multi-chassis-shunting-profile [name] string
| Synopsis | Enter the multi-chassis-shunting-profile list instance | |
| Context | configure service vprn string ipsec multi-chassis-shunting-profile string | |
| Tree | multi-chassis-shunting-profile | |
| Max. Instances | 64 | |
| Introduced | 22.5.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[name] string
| Synopsis | Multi-chassis shunting profile name | |
| Context | configure service vprn string ipsec multi-chassis-shunting-profile string | |
| Tree | multi-chassis-shunting-profile | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
peer [ip-address] reference
[ip-address] reference
| Synopsis | Peer address | |
| Context | configure service vprn string ipsec multi-chassis-shunting-profile string peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is part of a list key. | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
multi-chassis-shunt-interface reference
| Synopsis | Multi-chassis shunt interface | |
| Context | configure service vprn string ipsec multi-chassis-shunting-profile string peer reference multi-chassis-shunt-interface reference | |
| Tree | multi-chassis-shunt-interface | |
Reference | configure service vprn string ipsec multi-chassis-shunt-interface reference | |
| Introduced | 22.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
security-policy [id] number
| Synopsis | Enter the security-policy list instance | |
| Context | configure service vprn string ipsec security-policy number | |
| Tree | security-policy | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[id] number
| Synopsis | IPsec security policy ID | |
| Context | configure service vprn string ipsec security-policy number | |
| Tree | security-policy | |
| Range | 1 to 32768 | |
Notes | This element is part of a list key. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
entry [entry-id] number
[entry-id] number
local-ip
| Synopsis | Enter the local-ip context | |
| Context | configure service vprn string ipsec security-policy number entry number local-ip | |
| Tree | local-ip | |
Description | Commands in this context configure the local (from the VPN) IPv4 prefix/mask for the policy entry. The system evaluates the local IP as the source IP when traffic is examined in the direction of the flows from private to public and as the destination IP when traffic flows from public to private. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | Destination IPv4 address of the aggregate route | |
| Context | configure service vprn string ipsec security-policy number entry number local-ip address string | |
| Tree | address | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
any boolean
local-ipv6
| Synopsis | Enter the local-ipv6 context | |
| Context | configure service vprn string ipsec security-policy number entry number local-ipv6 | |
| Tree | local-ipv6 | |
Description | Commands in this context configure the local (from the VPN) IPv6 prefix/mask for the policy entry. The system evaluates the local IP as the source IP when traffic is examined in the direction of the flows from private to public and as the destination IP when traffic flows from public to private. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | Destination IPv6 address of the aggregate route | |
| Context | configure service vprn string ipsec security-policy number entry number local-ipv6 address string | |
| Tree | address | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
any boolean
| Synopsis | Use any IP address | |
| Context | configure service vprn string ipsec security-policy number entry number local-ipv6 any boolean | |
| Tree | any | |
| Default | false | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
remote-ip
| Synopsis | Enter the remote-ip context | |
| Context | configure service vprn string ipsec security-policy number entry number remote-ip | |
| Tree | remote-ip | |
Description | Commands in this context configure the remote (from the tunnel) IP prefix/mask for the policy entry. The system evaluates the remote IP as the source IP when traffic flows public to private and as the destination IP when traffic flows from private to public. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | Destination IPv4 address of the aggregate route | |
| Context | configure service vprn string ipsec security-policy number entry number remote-ip address string | |
| Tree | address | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
any boolean
remote-ipv6
| Synopsis | Enter the remote-ipv6 context | |
| Context | configure service vprn string ipsec security-policy number entry number remote-ipv6 | |
| Tree | remote-ipv6 | |
Description | Commands in this context configure the remote (from the tunnel) IPv6 prefix/mask for the policy entry. The system evaluates the remote IP as the source IP when traffic flows from public to private and as the destination IP when traffic flows from private to public. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | Destination IPv6 address of the aggregate route | |
| Context | configure service vprn string ipsec security-policy number entry number remote-ipv6 address string | |
| Tree | address | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
any boolean
| Synopsis | Use any IP address | |
| Context | configure service vprn string ipsec security-policy number entry number remote-ipv6 any boolean | |
| Tree | any | |
| Default | false | |
Notes | The following elements are part of a choice: address or any. | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv6
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
reachable-time number
| Synopsis | Neighbor reachability detection timer | |
| Context | configure service vprn string ipv6 neighbor-discovery reachable-time number | |
| Tree | reachable-time | |
| Range | 30 to 3600 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
stale-time number
| Synopsis | Neighbor discovery cache entry stale time | |
| Context | configure service vprn string ipv6 neighbor-discovery stale-time number | |
| Tree | stale-time | |
| Range | 60 to 65535 | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-advertisement
| Synopsis | Enter the router-advertisement context | |
| Context | configure service vprn string ipv6 router-advertisement | |
| Tree | router-advertisement | |
| Introduced | 16.0.R1 | |
Platforms | All |
dns-options
| Synopsis | Enable the dns-options context | |
| Context | configure service vprn string ipv6 router-advertisement dns-options | |
| Tree | dns-options | |
| Introduced | 16.0.R1 | |
Platforms | All |
rdnss-lifetime (keyword | number)
| Synopsis | Maximum time over which the RDNSS address is valid | |
| Context | configure service vprn string ipv6 router-advertisement dns-options rdnss-lifetime (keyword | number) | |
| Tree | rdnss-lifetime | |
Description | This command specifies the maximum time that the RDNSS address is used for name resolution by the client. | |
| Range | 0 | 4 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
Platforms |
All |
server string
| Synopsis | RAs that are forwarded to IPv6 DNS servers | |
| Context | configure service vprn string ipv6 router-advertisement dns-options server string | |
| Tree | server | |
| Max. Instances | 4 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [ip-int-name] reference
[ip-int-name] reference
admin-state keyword
| Synopsis | Administrative state of router advertisement | |
| Context | configure service vprn string ipv6 router-advertisement interface reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
current-hop-limit number
| Synopsis | Hop limit advertised in RA messages | |
| Context | configure service vprn string ipv6 router-advertisement interface reference current-hop-limit number | |
| Tree | current-hop-limit | |
| Range | 0 to 255 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
dns-options
| Synopsis | Enable the dns-options context | |
| Context | configure service vprn string ipv6 router-advertisement interface reference dns-options | |
| Tree | dns-options | |
| Introduced | 16.0.R1 | |
Platforms | All |
include-rdnss boolean
| Synopsis | Include the RDNSS option in the RA | |
| Context | configure service vprn string ipv6 router-advertisement interface reference dns-options include-rdnss boolean | |
| Tree | include-rdnss | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rdnss-lifetime (number | keyword)
| Synopsis | Maximum time over which the RDNSS address 25 is valid | |
| Context | configure service vprn string ipv6 router-advertisement interface reference dns-options rdnss-lifetime (number | keyword) | |
| Tree | rdnss-lifetime | |
| Range | 0 | 4 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
server string
| Synopsis | RAs that are forwarded to IPv6 DNS servers | |
| Context | configure service vprn string ipv6 router-advertisement interface reference dns-options server string | |
| Tree | server | |
| Max. Instances | 4 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
managed-configuration boolean
| Synopsis | Set the managed address configuration flag | |
| Context | configure service vprn string ipv6 router-advertisement interface reference managed-configuration boolean | |
| Tree | managed-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-advertisement-interval number
| Synopsis | Maximum time between sending advertisement messages | |
| Context | configure service vprn string ipv6 router-advertisement interface reference max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 4 to 1800 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | All |
min-advertisement-interval number
| Synopsis | Minimum interval between router advertisement messages | |
| Context | configure service vprn string ipv6 router-advertisement interface reference min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 3 to 1350 | |
| Units | seconds | |
| Default | 200 | |
| Introduced | 16.0.R1 | |
Platforms | All |
mtu number
other-stateful-configuration boolean
| Synopsis | Set the other configuration flag | |
| Context | configure service vprn string ipv6 router-advertisement interface reference other-stateful-configuration boolean | |
| Tree | other-stateful-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix [ipv6-prefix] string
[ipv6-prefix] string
autonomous boolean
| Synopsis | Set the autonomous flag value | |
| Context | configure service vprn string ipv6 router-advertisement interface reference prefix string autonomous boolean | |
| Tree | autonomous | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
on-link boolean
preferred-lifetime (keyword | number)
| Synopsis | Remaining time that the prefix remains preferred | |
| Context | configure service vprn string ipv6 router-advertisement interface reference prefix string preferred-lifetime (keyword | number) | |
| Tree | preferred-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 604800 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
valid-lifetime (keyword | number)
| Synopsis | Remaining time in which the prefix is still valid | |
| Context | configure service vprn string ipv6 router-advertisement interface reference prefix string valid-lifetime (keyword | number) | |
| Tree | valid-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 2592000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
reachable-time number
| Synopsis | Time the router is reachable by other hosts or nodes | |
| Context | configure service vprn string ipv6 router-advertisement interface reference reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
retransmit-time number
| Synopsis | Time to advertise neighbor advertisement messages | |
| Context | configure service vprn string ipv6 router-advertisement interface reference retransmit-time number | |
| Tree | retransmit-time | |
| Range | 0 to 1800000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
router-lifetime number
| Synopsis | Lifetime value in neighbor advertisement messages | |
| Context | configure service vprn string ipv6 router-advertisement interface reference router-lifetime number | |
| Tree | router-lifetime | |
| Range | 0 | 4 to 9000 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-virtual-mac boolean
| Synopsis | Use VRRP virtual MAC address for advertisement message | |
| Context | configure service vprn string ipv6 router-advertisement interface reference use-virtual-mac boolean | |
| Tree | use-virtual-mac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
isis [isis-instance] number
[isis-instance] number
admin-state keyword
| Synopsis | Administrative state of the IS-IS instance | |
| Context | configure service vprn string isis number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-passive-only boolean
| Synopsis | Advertise prefixes that belong to passive interfaces | |
| Context | configure service vprn string isis number advertise-passive-only boolean | |
| Tree | advertise-passive-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertise-router-capability keyword
| Synopsis | Router capabilities advertisement to neighbors | |
| Context | configure service vprn string isis number advertise-router-capability keyword | |
| Tree | advertise-router-capability | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
all-l1isis string
| Synopsis | Destination MAC address for all L1 IS-IS routers | |
| Context | configure service vprn string isis number all-l1isis string | |
| Tree | all-l1isis | |
| Default | 01:80:C2:00:00:14 | |
| Introduced | 16.0.R1 | |
Platforms | All |
all-l2isis string
| Synopsis | Destination MAC address for all L2 IS-IS routers | |
| Context | configure service vprn string isis number all-l2isis string | |
| Tree | all-l2isis | |
| Default | 01:80:C2:00:00:15 | |
| Introduced | 16.0.R1 | |
Platforms | All |
area-address string
| Synopsis | Area address portion of the NSAP address | |
| Context | configure service vprn string isis number area-address string | |
| Tree | area-address | |
| String Length | 2 to 38 | |
| Max. Instances | 3 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-check boolean
| Synopsis | Perform authentication check to reject mismatch PDUs | |
| Context | configure service vprn string isis number authentication-check boolean | |
| Tree | authentication-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-key string
| Synopsis | Authentication key to verify PDUs sent from neighbors | |
| Context | configure service vprn string isis number authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 366 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | Keychain used to sign and authenticate | |
| Context | configure service vprn string isis number authentication-keychain reference | |
| Tree | authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type | |
| Context | configure service vprn string isis number authentication-type keyword | |
| Tree | authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
csnp-authentication boolean
| Synopsis | Authenticate individual IS-IS packets of the CSNP type | |
| Context | configure service vprn string isis number csnp-authentication boolean | |
| Tree | csnp-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
default-route-tag number
| Synopsis | Route tag for the default route | |
| Context | configure service vprn string isis number default-route-tag number | |
| Tree | default-route-tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
export-limit
| Synopsis | Enable the export-limit context | |
| Context | configure service vprn string isis number export-limit | |
| Tree | export-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-percent number
| Synopsis | Export limit before warning and SNMP notification sent | |
| Context | configure service vprn string isis number export-limit log-percent number | |
| Tree | log-percent | |
| Range | 1 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
number number
export-policy reference
| Synopsis | Export policies that determine exported routes | |
| Context | configure service vprn string isis number export-policy reference | |
| Tree | export-policy | |
Description | This command configures export routing policies for the routes exported from the routing table to IS-IS. If the export policy is undefined, the system does not export non IS-IS routes from the routing table manager to IS-IS. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. If the aggregate command is also configured in the configure router context, the aggregation is applied before the export policy is applied. Routing policies are created in the configure router policy-options context. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string isis number graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
helper-mode boolean
| Synopsis | Enable the Graceful Restart helper for IS-IS | |
| Context | configure service vprn string isis number graceful-restart helper-mode boolean | |
| Tree | helper-mode | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-authentication boolean
| Synopsis | Authenticate Hello type IS-IS protocol packets | |
| Context | configure service vprn string isis number hello-authentication boolean | |
| Tree | hello-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-padding keyword
| Synopsis | IS-IS Hello message padding | |
| Context | configure service vprn string isis number hello-padding keyword | |
| Tree | hello-padding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
ignore-attached-bit boolean
| Synopsis | Ignore attached bit on received Layer 1 LSPs | |
| Context | configure service vprn string isis number ignore-attached-bit boolean | |
| Tree | ignore-attached-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ignore-lsp-errors boolean
| Synopsis | Ignore LSP packets with errors | |
| Context | configure service vprn string isis number ignore-lsp-errors boolean | |
| Tree | ignore-lsp-errors | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ignore-narrow-metric boolean
| Synopsis | Ignore links with narrow metrics | |
| Context | configure service vprn string isis number ignore-narrow-metric boolean | |
| Tree | ignore-narrow-metric | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
iid-tlv boolean
import-policy reference
| Synopsis | Import policy names for routes from IGP to route table | |
| Context | configure service vprn string isis number import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the IS-IS interface | |
| Context | configure service vprn string isis number interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
bfd-liveness
| Synopsis | Enter the bfd-liveness context | |
| Context | configure service vprn string isis number interface string bfd-liveness | |
| Tree | bfd-liveness | |
Description | Commands in this context enable the use of bidirectional forwarding (BFD) to control IPv4 and IPv6 adjacencies. Enabling BFD on an IPv4 or IPv6 protocol interface ties the protocol interface state to the BFD session state between the local and remote nodes. BFD must be enabled on the applicable IP interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4
include-bfd-tlv boolean
| Synopsis | Enable IS-IS BFD TLVs on the interface | |
| Context | configure service vprn string isis number interface string bfd-liveness ipv4 include-bfd-tlv boolean | |
| Tree | include-bfd-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6
include-bfd-tlv boolean
| Synopsis | Enable IS-IS BFD TLVs on the interface | |
| Context | configure service vprn string isis number interface string bfd-liveness ipv6 include-bfd-tlv boolean | |
| Tree | include-bfd-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
csnp-interval number
| Synopsis | Time interval between successive CSN PDUs sent | |
| Context | configure service vprn string isis number interface string csnp-interval number | |
| Tree | csnp-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-instance boolean
| Synopsis | Allow non-MI capable router to establish an adjacency | |
| Context | configure service vprn string isis number interface string default-instance boolean | |
| Tree | default-instance | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-authentication boolean
| Synopsis | Authenticate Hello type IS-IS protocol packets | |
| Context | configure service vprn string isis number interface string hello-authentication boolean | |
| Tree | hello-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-authentication-key string
| Synopsis | Authentication key or hash string for Hello PDUs | |
| Context | configure service vprn string isis number interface string hello-authentication-key string | |
| Tree | hello-authentication-key | |
| String Length | 1 to 366 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hello-authentication-keychain reference
| Synopsis | Authentication keychain to use for the session | |
| Context | configure service vprn string isis number interface string hello-authentication-keychain reference | |
| Tree | hello-authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
hello-authentication-type keyword
| Synopsis | Hello authentication type | |
| Context | configure service vprn string isis number interface string hello-authentication-type keyword | |
| Tree | hello-authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-padding keyword
| Synopsis | Padding on IS-IS Hello packets | |
| Context | configure service vprn string isis number interface string hello-padding keyword | |
| Tree | hello-padding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
interface-type keyword
| Synopsis | Interface type to broadcast, point-to-point, or to be default | |
| Context | configure service vprn string isis number interface string interface-type keyword | |
| Tree | interface-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
ipv4-multicast boolean
| Synopsis | Enable IPv4 multicast routing for the interface | |
| Context | configure service vprn string isis number interface string ipv4-multicast boolean | |
| Tree | ipv4-multicast | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6-unicast boolean
| Synopsis | Enable IPv6 unicast routing for the interface | |
| Context | configure service vprn string isis number interface string ipv6-unicast boolean | |
| Tree | ipv6-unicast | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
level [level-number] keyword
[level-number] keyword
hello-authentication-key string
| Synopsis | Authentication key for Hello PDUs | |
| Context | configure service vprn string isis number interface string level keyword hello-authentication-key string | |
| Tree | hello-authentication-key | |
Description | This command configures the authentication key (password) for Hello PDUs. Both the Hello authentication key and the Hello authentication type on a segment must match. If both IS-IS and Hello authentication are configured, Hello messages are validated using Hello authentication. If only IS-IS authentication is configured, it is used to authenticate all IS-IS (including Hello) protocol PDUs. | |
| String Length | 1 to 366 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hello-authentication-keychain reference
| Synopsis | Authentication keychain to use for the session | |
| Context | configure service vprn string isis number interface string level keyword hello-authentication-keychain reference | |
| Tree | hello-authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
hello-authentication-type keyword
| Synopsis | Hello authentication enabled on the context | |
| Context | configure service vprn string isis number interface string level keyword hello-authentication-type keyword | |
| Tree | hello-authentication-type | |
Description | This command enables Hello authentication at the level context. Both the Hello authentication key and the Hello authentication type on a segment must match. The Hello authentication-key statement must also be included. | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-interval number
| Synopsis | Interval between Hello messages sent on this level | |
| Context | configure service vprn string isis number interface string level keyword hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 20000 | |
| Units | seconds | |
| Default | 9 | |
| Introduced | 16.0.R1 | |
Platforms | All |
hello-multiplier number
| Synopsis | Hello messages missed from neighbor before router declares adjacency down | |
| Context | configure service vprn string isis number interface string level keyword hello-multiplier number | |
| Tree | hello-multiplier | |
| Range | 2 to 100 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-padding keyword
| Synopsis | Padding on IS-IS Hello packets | |
| Context | configure service vprn string isis number interface string level keyword hello-padding keyword | |
| Tree | hello-padding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
ipv4-multicast-metric number
| Synopsis | IS-IS interface metric applied for IPv4 multicast | |
| Context | configure service vprn string isis number interface string level keyword ipv4-multicast-metric number | |
| Tree | ipv4-multicast-metric | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-unicast-metric number
| Synopsis | IS-IS interface metric applied for IPv6 unicast | |
| Context | configure service vprn string isis number interface string level keyword ipv6-unicast-metric number | |
| Tree | ipv6-unicast-metric | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
metric number
passive boolean
priority number
sd-offset number
sf-offset number
level-capability keyword
| Synopsis | IS-IS levels for this interface | |
| Context | configure service vprn string isis number interface string level-capability keyword | |
| Tree | level-capability | |
| Options | ||
| Default | 1/2 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
load-balancing-weight number
| Synopsis | Load balancing weight | |
| Context | configure service vprn string isis number interface string load-balancing-weight number | |
| Tree | load-balancing-weight | |
| Max. Range | 0 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
loopfree-alternate
| Synopsis | Enter the loopfree-alternate context | |
| Context | configure service vprn string isis number interface string loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R3 | |
Platforms | All |
exclude boolean
policy-map
| Synopsis | Enable the policy-map context | |
| Context | configure service vprn string isis number interface string loopfree-alternate policy-map | |
| Tree | policy-map | |
| Introduced | 16.0.R3 | |
Platforms | All |
route-nh-template reference
| Synopsis | Route next hop policy template name | |
| Context | configure service vprn string isis number interface string loopfree-alternate policy-map route-nh-template reference | |
| Tree | route-nh-template | |
Reference | configure routing-options route-next-hop-policy template string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R3 | |
Platforms | All |
lsp-pacing-interval number
| Synopsis | Interval for sending LSPs from interface | |
| Context | configure service vprn string isis number interface string lsp-pacing-interval number | |
| Tree | lsp-pacing-interval | |
| Range | 0 to 65535 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms | All |
mesh-group
| Synopsis | Enable the mesh-group context | |
| Context | configure service vprn string isis number interface string mesh-group | |
| Tree | mesh-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
blocked
value number
passive boolean
retransmit-interval number
| Synopsis | Minimum time between LSP PDU retransmissions on point-to-point interface | |
| Context | configure service vprn string isis number interface string retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
tag number
ipv4-multicast-routing keyword
| Synopsis | IS-IS topology for IPv4 multicast routing | |
| Context | configure service vprn string isis number ipv4-multicast-routing keyword | |
| Tree | ipv4-multicast-routing | |
| Options | ||
| Default | native | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv4-routing boolean
| Synopsis | Support IPv4 routing for IS-IS instance | |
| Context | configure service vprn string isis number ipv4-routing boolean | |
| Tree | ipv4-routing | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6-routing keyword
| Synopsis | Routing topology for IPv6 | |
| Context | configure service vprn string isis number ipv6-routing keyword | |
| Tree | ipv6-routing | |
| Options | ||
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
level [level-number] keyword
[level-number] keyword
advertise-router-capability boolean
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string isis number level keyword advertise-router-capability boolean | |
| Tree | advertise-router-capability | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-key string
| Synopsis | Authentication key to verify PDUs sent on the interface | |
| Context | configure service vprn string isis number level keyword authentication-key string | |
| Tree | authentication-key | |
Description | This command sets the authentication key used to verify PDUs sent by neighboring routers on the interface. Neighboring routers use passwords to authenticate PDUs sent from an interface. For authentication to work, both the authentication key and the authentication type on a segment must match. The authentication-type command must also be included. | |
| String Length | 1 to 366 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | Keychain used to sign and authenticate | |
| Context | configure service vprn string isis number level keyword authentication-keychain reference | |
| Tree | authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type to be used | |
| Context | configure service vprn string isis number level keyword authentication-type keyword | |
| Tree | authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
csnp-authentication boolean
| Synopsis | Enable authentication of CSNP IS-IS protocol packets | |
| Context | configure service vprn string isis number level keyword csnp-authentication boolean | |
| Tree | csnp-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
default-ipv4-multicast-metric number
| Synopsis | Default metric for IPv4 unicast | |
| Context | configure service vprn string isis number level keyword default-ipv4-multicast-metric number | |
| Tree | default-ipv4-multicast-metric | |
| Range | 1 to 16777215 | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
default-ipv6-unicast-metric number
| Synopsis | Default metric for IPv6 unicast | |
| Context | configure service vprn string isis number level keyword default-ipv6-unicast-metric number | |
| Tree | default-ipv6-unicast-metric | |
| Range | 1 to 16777215 | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
default-metric number
| Synopsis | Default metric | |
| Context | configure service vprn string isis number level keyword default-metric number | |
| Tree | default-metric | |
| Range | 1 to 16777215 | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
external-preference number
| Synopsis | External route preference for IS-IS level | |
| Context | configure service vprn string isis number level keyword external-preference number | |
| Tree | external-preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-authentication boolean
| Synopsis | Authenticate Hello type IS-IS protocol packets | |
| Context | configure service vprn string isis number level keyword hello-authentication boolean | |
| Tree | hello-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-padding keyword
| Synopsis | Padding on IS-IS Hello packets | |
| Context | configure service vprn string isis number level keyword hello-padding keyword | |
| Tree | hello-padding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
loopfree-alternate-exclude boolean
| Synopsis | Exclude interface participating in specific IS-IS level in SPF LFA computation | |
| Context | configure service vprn string isis number level keyword loopfree-alternate-exclude boolean | |
| Tree | loopfree-alternate-exclude | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lsp-mtu-size number
|
WARNING: Modifying this element requires the admin-state of the parent element to be toggled manually for the new value to take effect. | ||
| Synopsis | LSP MTU size | |
| Context | configure service vprn string isis number level keyword lsp-mtu-size number | |
| Tree | lsp-mtu-size | |
| Range | 490 to 9778 | |
| Units | bytes | |
| Default | 1492 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
preference number
| Synopsis | External route preference at level | |
| Context | configure service vprn string isis number level keyword preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
psnp-authentication boolean
| Synopsis | Enable authentication on PSNP IS-IS protocol packets | |
| Context | configure service vprn string isis number level keyword psnp-authentication boolean | |
| Tree | psnp-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
wide-metrics-only boolean
| Synopsis | Use wide metrics advertisements in the LSPs | |
| Context | configure service vprn string isis number level keyword wide-metrics-only boolean | |
| Tree | wide-metrics-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
level-capability keyword
| Synopsis | Routing level for instance | |
| Context | configure service vprn string isis number level-capability keyword | |
| Tree | level-capability | |
| Options | ||
| Default | 1/2 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
link-group [link-group-name] string
| Synopsis | Enter the link-group list instance | |
| Context | configure service vprn string isis number link-group string | |
| Tree | link-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[link-group-name] string
| Synopsis | Link group name for the IS-IS protocol | |
| Context | configure service vprn string isis number link-group string | |
| Tree | link-group | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string isis number link-group string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
level [level-number] keyword
[level-number] keyword
ipv4-multicast-metric-offset number
| Synopsis | Offset value for the IPv4 multicast address family | |
| Context | configure service vprn string isis number link-group string level keyword ipv4-multicast-metric-offset number | |
| Tree | ipv4-multicast-metric-offset | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4-unicast-metric-offset number
| Synopsis | Offset value for the IPv4 unicast address family | |
| Context | configure service vprn string isis number link-group string level keyword ipv4-unicast-metric-offset number | |
| Tree | ipv4-unicast-metric-offset | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-unicast-metric-offset number
| Synopsis | Offset value for the IPv6 unicast address family | |
| Context | configure service vprn string isis number link-group string level keyword ipv6-unicast-metric-offset number | |
| Tree | ipv6-unicast-metric-offset | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
member [interface-name] reference
[interface-name] reference
oper-members number
| Synopsis | Minimum number of operational links | |
| Context | configure service vprn string isis number link-group string level keyword oper-members number | |
| Tree | oper-members | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
revert-members number
| Synopsis | Minimum number of operational links to return link group to normal state and remove offsets | |
| Context | configure service vprn string isis number link-group string level keyword revert-members number | |
| Tree | revert-members | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
loopfree-alternate
| Synopsis | Enable the loopfree-alternate context | |
| Context | configure service vprn string isis number loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R1 | |
Platforms | All |
exclude
prefix-policy reference
| Synopsis | Policy to exclude prefixes from LFA SPF calculation | |
| Context | configure service vprn string isis number loopfree-alternate exclude prefix-policy reference | |
| Tree | prefix-policy | |
Description | This command specifies the name of the policy for the prefixes to exclude from the LFA SPF calculation. An excluded prefix is not included in LFA calculation regardless of its priority. The prefix tag is, however, used in the main SPF. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R3 | |
Platforms | All |
lsp-lifetime number
|
WARNING: Modifying this element requires the admin-state of the parent element to be toggled manually for the new value to take effect. | ||
| Synopsis | Amount of time during which an LSP is considered valid | |
| Context | configure service vprn string isis number lsp-lifetime number | |
| Tree | lsp-lifetime | |
| Range | 350 to 65535 | |
| Units | seconds | |
| Default | 1200 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
lsp-minimum-remaining-lifetime number
| Synopsis | Minimum value for the Remaining Lifetime of an LSP | |
| Context | configure service vprn string isis number lsp-minimum-remaining-lifetime number | |
| Tree | lsp-minimum-remaining-lifetime | |
| Range | 350 to 65535 | |
| Units | seconds | |
| Introduced | 19.7.R1 | |
Platforms |
All |
lsp-mtu-size number
|
WARNING: Modifying this element requires the admin-state of the parent element to be toggled manually for the new value to take effect. | ||
| Synopsis | LSP MTU size | |
| Context | configure service vprn string isis number lsp-mtu-size number | |
| Tree | lsp-mtu-size | |
| Range | 490 to 9778 | |
| Units | bytes | |
| Default | 1492 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
lsp-refresh
| Synopsis | Enter the lsp-refresh context | |
| Context | configure service vprn string isis number lsp-refresh | |
| Tree | lsp-refresh | |
| Introduced | 16.0.R1 | |
Platforms | All |
half-lifetime boolean
| Synopsis | Set the refresh interval to always be half the LSP lifetime | |
| Context | configure service vprn string isis number lsp-refresh half-lifetime boolean | |
| Tree | half-lifetime | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
interval number
mru-mismatch-detection boolean
| Synopsis | Enable detection of MRU mismatch | |
| Context | configure service vprn string isis number mru-mismatch-detection boolean | |
| Tree | mru-mismatch-detection | |
Description | When configured to true, this command verifies that the received IS-IS Hello (IIH) packet size does not exceed the configured maximum port MTU size. The received IIH packet is dropped when its size exceeds the maximum port MTU size. When configured to false, the IS-IS router instance will not drop oversized IIH packets. By default, FP-based hardware can receive oversized packets but it will not originate them. | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multi-topology
| Synopsis | Enable the multi-topology context | |
| Context | configure service vprn string isis number multi-topology | |
| Tree | multi-topology | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4-multicast boolean
| Synopsis | Support IPv4 topology (MT3) | |
| Context | configure service vprn string isis number multi-topology ipv4-multicast boolean | |
| Tree | ipv4-multicast | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6-unicast boolean
| Synopsis | Support multi-topology TLVs | |
| Context | configure service vprn string isis number multi-topology ipv6-unicast boolean | |
| Tree | ipv6-unicast | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multicast-import
| Synopsis | Enter the multicast-import context | |
| Context | configure service vprn string isis number multicast-import | |
| Tree | multicast-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
overload
max-metric boolean
| Synopsis | Advertise transit links with maximum metric instead of setting overload bit | |
| Context | configure service vprn string isis number overload max-metric boolean | |
| Tree | max-metric | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-export-external boolean
| Synopsis | Advertise the external routes when router is in overloaded | |
| Context | configure service vprn string isis number overload-export-external boolean | |
| Tree | overload-export-external | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-export-interlevel boolean
| Synopsis | Advertise the inter-level routes when router is overloaded | |
| Context | configure service vprn string isis number overload-export-interlevel boolean | |
| Tree | overload-export-interlevel | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-fib-error-notify-only
| Synopsis | Enable the overload-fib-error-notify-only context | |
| Context | configure service vprn string isis number overload-fib-error-notify-only | |
| Tree | overload-fib-error-notify-only | |
Description | Commands in this context configure the IS-IS router to send a notification when an overload condition occurs while programming the FIB, instead of advertising the overload condition of the router in the IS-IS LSP. Note: Nokia recommends being careful using this command. When you configure the router not to advertise the IS-IS overload state in the IS-IS LSP, other routers are not instructed to take the overloaded router out of the IS-IS forwarding topology and this will cause suboptimal forwarding and non-deterministic behavior on the overloaded router. To avoid changing the default IS-IS overflow behavior, leave this command disabled. When this command is configured, the IS-IS router enters a suboptimal state where it sends only a notification trap; transit traffic can still use the router in this state. The IS-IS router tracks the segment routing prefix SIDs where FIB programming failed. With the retry command configured, the router retries programming the segment routing prefix SIDs in the FIB using this tracked information. When this command is not configured, during normal operation, the system may force the router to enter an overload state because of a lack of FIB resources. In this state, the router is used to terminate traffic and is not used to transit traffic. | |
| Introduced | 23.7.R1 | |
Platforms | All |
retry number
| Synopsis | Time to retry programming failed entries in the FIB | |
| Context | configure service vprn string isis number overload-fib-error-notify-only retry number | |
| Tree | retry | |
Description | This command configures the time the router uses to retry programming the failed entries in the FIB. The overload-fib-error-notify-only command must be configured to use the retry timer. The removal of the overload-fib-error-notify-only configuration causes the system to program the failed entries in the FIB by triggering an immediate SPF. | |
| Range | 10 to 1800 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 23.7.R1 | |
Platforms | All |
overload-on-boot
| Synopsis | Enable the overload-on-boot context | |
| Context | configure service vprn string isis number overload-on-boot | |
| Tree | overload-on-boot | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-metric boolean
| Synopsis | Advertise transit links with maximum metric instead of setting overload bit | |
| Context | configure service vprn string isis number overload-on-boot max-metric boolean | |
| Tree | max-metric | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
timeout number
poi-tlv boolean
prefix-attributes-tlv boolean
| Synopsis | Use IS-IS Prefix Attributes TLV to exchange extended IPv4 and IPv6 reachability information | |
| Context | configure service vprn string isis number prefix-attributes-tlv boolean | |
| Tree | prefix-attributes-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-limit
| Synopsis | Enable the prefix-limit context | |
| Context | configure service vprn string isis number prefix-limit | |
| Tree | prefix-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
limit number
log-only boolean
overload-timeout (number | keyword)
| Synopsis | Time in overload state when prefix limit is reached | |
| Context | configure service vprn string isis number prefix-limit overload-timeout (number | keyword) | |
| Tree | overload-timeout | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Options | ||
| Default | forever | |
| Introduced | 16.0.R1 | |
Platforms |
All |
warning-threshold number
| Synopsis | Threshold value to trigger a warning message to be sent | |
| Context | configure service vprn string isis number prefix-limit warning-threshold number | |
| Tree | warning-threshold | |
| Range | 0 to 100 | |
| Units | percent | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | All |
psnp-authentication boolean
| Synopsis | Authenticate individual IS-IS protocol packets of partial sequence number PDU (PSNP) type | |
| Context | configure service vprn string isis number psnp-authentication boolean | |
| Tree | psnp-authentication | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
reference-bandwidth number
| Synopsis | Reference bandwidth for bandwidth relative costing | |
| Context | configure service vprn string isis number reference-bandwidth number | |
| Tree | reference-bandwidth | |
| Range | 1 to 18446744073709551615 | |
| Units | kilobps | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rib-priority
| Synopsis | Enter the rib-priority context | |
| Context | configure service vprn string isis number rib-priority | |
| Tree | rib-priority | |
| Introduced | 16.0.R1 | |
Platforms | All |
high
prefix-list reference
| Synopsis | List used to select routes processed at higher priority through OSPF route calculation process | |
| Context | configure service vprn string isis number rib-priority high prefix-list reference | |
| Tree | prefix-list | |
Reference | configure policy-options prefix-list string | |
Notes | The following elements are part of a choice: prefix-list or tag. | |
| Introduced | 16.0.R1 | |
Platforms | All |
tag number
router-id string
standard-multi-instance boolean
| Synopsis | Enable RFC standards compliant multi-instance behavior | |
| Context | configure service vprn string isis number standard-multi-instance boolean | |
| Tree | standard-multi-instance | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
strict-adjacency-check boolean
| Synopsis | Enable strict checking of address families for IS-IS adjacencies | |
| Context | configure service vprn string isis number strict-adjacency-check boolean | |
| Tree | strict-adjacency-check | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
summary-address [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the summary-address list instance | |
| Context | configure service vprn string isis number summary-address (ipv4-prefix | ipv6-prefix) | |
| Tree | summary-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IP prefix for the summary address | |
| Context | configure service vprn string isis number summary-address (ipv4-prefix | ipv6-prefix) | |
| Tree | summary-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
level-capability keyword
| Synopsis | IS-IS level for the summary address | |
| Context | configure service vprn string isis number summary-address (ipv4-prefix | ipv6-prefix) level-capability keyword | |
| Tree | level-capability | |
| Options | ||
| Default | 1/2 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
route-tag number
suppress-attached-bit boolean
| Synopsis | Allow IS-IS to suppress setting attached bit on LSPs | |
| Context | configure service vprn string isis number suppress-attached-bit boolean | |
| Tree | suppress-attached-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
system-id string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element requires the admin-state of the parent element to be toggled manually for the new value to take effect. | ||
| Synopsis | System ID | |
| Context | configure service vprn string isis number system-id string | |
| Tree | system-id | |
| String Length | 14 | |
| Default | 0000.0000.0000 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
timers
lsp-wait
lsp-initial-wait number
| Synopsis | Initial LSP generation delay | |
| Context | configure service vprn string isis number timers lsp-wait lsp-initial-wait number | |
| Tree | lsp-initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
lsp-max-wait number
| Synopsis | Maximum time between two consecutive LSP occurrences | |
| Context | configure service vprn string isis number timers lsp-wait lsp-max-wait number | |
| Tree | lsp-max-wait | |
| Range | 10 to 120000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
lsp-second-wait number
| Synopsis | Delay between first and second LSP generation | |
| Context | configure service vprn string isis number timers lsp-wait lsp-second-wait number | |
| Tree | lsp-second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-wait
spf-initial-wait number
| Synopsis | Initial SPF calculation delay after topology change | |
| Context | configure service vprn string isis number timers spf-wait spf-initial-wait number | |
| Tree | spf-initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-max-wait number
| Synopsis | Maximum interval amid two consecutive SPF calculations | |
| Context | configure service vprn string isis number timers spf-wait spf-max-wait number | |
| Tree | spf-max-wait | |
| Range | 10 to 120000 | |
| Units | milliseconds | |
| Default | 10000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-second-wait number
| Synopsis | Hold time between first and second SPF calculations | |
| Context | configure service vprn string isis number timers spf-wait spf-second-wait number | |
| Tree | spf-second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
unicast-import
| Synopsis | Enter the unicast-import context | |
| Context | configure service vprn string isis number unicast-import | |
| Tree | unicast-import | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
l2tp
admin-state keyword
| Synopsis | Administrative state of L2TP | |
| Context | configure service vprn string l2tp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
avp-hiding keyword
| Synopsis | Attribute of the Value Pair (AVP) hiding algorithm | |
| Context | configure service vprn string l2tp avp-hiding keyword | |
| Tree | avp-hiding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
challenge boolean
destruct-timeout number
| Synopsis | Destruction timeout | |
| Context | configure service vprn string l2tp destruct-timeout number | |
| Tree | destruct-timeout | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ethernet-tunnel
| Synopsis | Enter the ethernet-tunnel context | |
| Context | configure service vprn string l2tp ethernet-tunnel | |
| Tree | ethernet-tunnel | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reconnect-timeout (number | keyword)
| Synopsis | Timeout for a session setup retry | |
| Context | configure service vprn string l2tp ethernet-tunnel reconnect-timeout (number | keyword) | |
| Tree | reconnect-timeout | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
exclude-avps
| Synopsis | Enter the exclude-avps context | |
| Context | configure service vprn string l2tp exclude-avps | |
| Tree | exclude-avps | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
calling-number boolean
| Synopsis | Calling Number AVP to exclude | |
| Context | configure service vprn string l2tp exclude-avps calling-number boolean | |
| Tree | calling-number | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
initial-rx-lcp-conf-req boolean
| Synopsis | Exclude the Initial Received LCP CONFREQ AVP | |
| Context | configure service vprn string l2tp exclude-avps initial-rx-lcp-conf-req boolean | |
| Tree | initial-rx-lcp-conf-req | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
recovery-max-session-lifetime number
| Synopsis | Subset of sessions that this system attempts to synchronize in the Session State Synchronization phase | |
| Context | configure service vprn string l2tp failover recovery-max-session-lifetime number | |
| Tree | recovery-max-session-lifetime | |
| Range | 2 to 4294967295 | |
| Units | centiseconds | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
recovery-method keyword
| Synopsis | Recovery method of the sequence numbers after failover | |
| Context | configure service vprn string l2tp failover recovery-method keyword | |
| Tree | recovery-method | |
| Options | ||
| Default | mcs | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
recovery-time number
| Synopsis | Time requested from the L2TP peer before assuming failover as failed | |
| Context | configure service vprn string l2tp failover recovery-time number | |
| Tree | recovery-time | |
| Range | 0 to 900 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
track-srrp [id] reference
| Synopsis | Enter the track-srrp list instance | |
| Context | configure service vprn string l2tp failover track-srrp reference | |
| Tree | track-srrp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[id] reference
| Synopsis | SRRP instance ID for multi-chassis redundancy failover | |
| Context | configure service vprn string l2tp failover track-srrp reference | |
| Tree | track-srrp | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) sync track-srrp number | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
peer reference
| Synopsis | Multi-chassis peer address | |
| Context | configure service vprn string l2tp failover track-srrp reference peer reference | |
| Tree | peer | |
Reference | configure redundancy multi-chassis peer (ipv4-address-no-zone | ipv6-address-no-zone) | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sync-tag string
group [tunnel-group-name] string
[tunnel-group-name] string
admin-state keyword
| Synopsis | Administrative state of the L2TP tunnel group | |
| Context | configure service vprn string l2tp group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
avp-hiding keyword
| Synopsis | The AVP hiding algorithm | |
| Context | configure service vprn string l2tp group string avp-hiding keyword | |
| Tree | avp-hiding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
challenge keyword
description string
| Synopsis | Text description | |
| Context | configure service vprn string l2tp group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destruct-timeout number
| Synopsis | Destruction timeout | |
| Context | configure service vprn string l2tp group string destruct-timeout number | |
| Tree | destruct-timeout | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ethernet-tunnel
| Synopsis | Enter the ethernet-tunnel context | |
| Context | configure service vprn string l2tp group string ethernet-tunnel | |
| Tree | ethernet-tunnel | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reconnect-timeout (number | keyword)
| Synopsis | Timeout for a session setup retry at group level | |
| Context | configure service vprn string l2tp group string ethernet-tunnel reconnect-timeout (number | keyword) | |
| Tree | reconnect-timeout | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
recovery-method keyword
| Synopsis | Recovery method of the sequence numbers after failover | |
| Context | configure service vprn string l2tp group string failover recovery-method keyword | |
| Tree | recovery-method | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
recovery-time number
| Synopsis | Time requested from the L2TP peer before assuming failover as failed | |
| Context | configure service vprn string l2tp group string failover recovery-time number | |
| Tree | recovery-time | |
| Range | 0 to 900 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hello-interval (number | keyword)
| Synopsis | Hello interval | |
| Context | configure service vprn string l2tp group string hello-interval (number | keyword) | |
| Tree | hello-interval | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
idle-timeout (number | keyword)
| Synopsis | Idle timeout | |
| Context | configure service vprn string l2tp group string idle-timeout (number | keyword) | |
| Tree | idle-timeout | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2tpv3
cookie-length (number | keyword)
| Synopsis | Cookie field length | |
| Context | configure service vprn string l2tp group string l2tpv3 cookie-length (number | keyword) | |
| Tree | cookie-length | |
| Range | 4 | 8 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
digest-type keyword
| Synopsis | Hashing algorithm that calculates the message digest | |
| Context | configure service vprn string l2tp group string l2tpv3 digest-type keyword | |
| Tree | digest-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nonce-length number
| Synopsis | Length for the local L2TPv3 nonce (random number) | |
| Context | configure service vprn string l2tp group string l2tpv3 nonce-length number | |
| Tree | nonce-length | |
| Range | 0 | 16 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
password string
private-tcp-mss-adjust (number | keyword)
| Synopsis | TCP maximum segment size (MSS) on private network | |
| Context | configure service vprn string l2tp group string l2tpv3 private-tcp-mss-adjust (number | keyword) | |
| Tree | private-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
public-tcp-mss-adjust (number | keyword)
| Synopsis | TCP Maximum Segment Size (MSS) on public network | |
| Context | configure service vprn string l2tp group string l2tpv3 public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pw-cap-list
| Synopsis | Enter the pw-cap-list context | |
| Context | configure service vprn string l2tp group string l2tpv3 pw-cap-list | |
| Tree | pw-cap-list | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ethernet boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Advertise Ethernet pseudowire type | |
| Context | configure service vprn string l2tp group string l2tpv3 pw-cap-list ethernet boolean | |
| Tree | ethernet | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ethernet-vlan boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Advertise Ethernet VLAN pseudowire type | |
| Context | configure service vprn string l2tp group string l2tpv3 pw-cap-list ethernet-vlan boolean | |
| Tree | ethernet-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
rem-router-id string
| Synopsis | Filter on remote router ID | |
| Context | configure service vprn string l2tp group string l2tpv3 rem-router-id string | |
| Tree | rem-router-id | |
| Default | 0.0.0.0 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
track-password-change boolean
| Synopsis | Enable tracking of password changes | |
| Context | configure service vprn string l2tp group string l2tpv3 track-password-change boolean | |
| Tree | track-password-change | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lac
df-bit keyword
lns
lns-group reference
load-balance-method keyword
| Synopsis | New sessions for L2TP ISA MDA | |
| Context | configure service vprn string l2tp group string lns load-balance-method keyword | |
| Tree | load-balance-method | |
| Options | ||
| Default | per-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mlppp
admin-state keyword
| Synopsis | Administrative state of MLPPP in the L2TP tunnel group | |
| Context | configure service vprn string l2tp group string lns mlppp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
endpoint
ip (ipv4-address | keyword)
mac (mac-address | keyword)
interleave boolean
| Synopsis | Enable link fragmentation and interleaving | |
| Context | configure service vprn string l2tp group string lns mlppp interleave boolean | |
| Tree | interleave | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
max-fragment-delay (number | keyword)
| Synopsis | Maximum fragment delay caused by transmission on a link | |
| Context | configure service vprn string l2tp group string lns mlppp max-fragment-delay (number | keyword) | |
| Tree | max-fragment-delay | |
| Range | 5 to 1000 | |
| Units | milliseconds | |
| Options | ||
| Default | no-fragmentation | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
max-links number
reassembly-timeout number
| Synopsis | Reassembly timeout | |
| Context | configure service vprn string l2tp group string lns mlppp reassembly-timeout number | |
| Tree | reassembly-timeout | |
| Range | 100 | 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
short-sequence-numbers boolean
| Synopsis | Request a peer to send short sequence numbers | |
| Context | configure service vprn string l2tp group string lns mlppp short-sequence-numbers boolean | |
| Tree | short-sequence-numbers | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
ppp
authentication keyword
| Synopsis | PPP authentication protocol to negotiate | |
| Context | configure service vprn string l2tp group string lns ppp authentication keyword | |
| Tree | authentication | |
| Options | ||
| Default | pref-chap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication-policy string
| Synopsis | Authentication policy when a DHCP message is received | |
| Context | configure service vprn string l2tp group string lns ppp authentication-policy string | |
| Tree | authentication-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
chap-challenge-length
| Synopsis | Enter the chap-challenge-length context | |
| Context | configure service vprn string l2tp group string lns ppp chap-challenge-length | |
| Tree | chap-challenge-length | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
end number
start number
default-group-interface
| Synopsis | Enter the default-group-interface context | |
| Context | configure service vprn string l2tp group string lns ppp default-group-interface | |
| Tree | default-group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface string
service-name string
| Synopsis | Administrative service name | |
| Context | configure service vprn string l2tp group string lns ppp default-group-interface service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipcp-subnet-negotiation boolean
| Synopsis | Allow IPCP subnet negotiation for PPPoE hosts | |
| Context | configure service vprn string l2tp group string lns ppp ipcp-subnet-negotiation boolean | |
| Tree | ipcp-subnet-negotiation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
keepalive
interval number
multiplier number
| Synopsis | PPP keepalive multiplier | |
| Context | configure service vprn string l2tp group string lns ppp keepalive multiplier number | |
| Tree | multiplier | |
| Range | 1 to 5 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lcp-force-ack-accm boolean
| Synopsis | Force acknowledgement of the LCP Asynchronous Control Character Map (ACCM) option | |
| Context | configure service vprn string l2tp group string lns ppp lcp-force-ack-accm boolean | |
| Tree | lcp-force-ack-accm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lcp-ignore-magic-numbers boolean
| Synopsis | Check magic number in echo request and reply messages | |
| Context | configure service vprn string l2tp group string lns ppp lcp-ignore-magic-numbers boolean | |
| Tree | lcp-ignore-magic-numbers | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mtu number
proxy-authentication boolean
| Synopsis | Use authentication AVPs that are received from LAC | |
| Context | configure service vprn string l2tp group string lns ppp proxy-authentication boolean | |
| Tree | proxy-authentication | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
proxy-lcp boolean
reject-disabled-ncp boolean
| Synopsis | Force LCP Protocol Reject for IPv6CP Configure Request | |
| Context | configure service vprn string l2tp group string lns ppp reject-disabled-ncp boolean | |
| Tree | reject-disabled-ncp | |
| Default | false | |
| Introduced | 16.0.R6 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
user-db string
local-address string
| Synopsis | Local address | |
| Context | configure service vprn string l2tp group string local-address string | |
| Tree | local-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-name string
| Synopsis | Local host name used to distinguish tunnels | |
| Context | configure service vprn string l2tp group string local-name string | |
| Tree | local-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-estab number
| Synopsis | Maximum retries for established tunnels | |
| Context | configure service vprn string l2tp group string max-retries-estab number | |
| Tree | max-retries-estab | |
| Range | 2 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-not-estab number
| Synopsis | Maximum retries for unestablished tunnels | |
| Context | configure service vprn string l2tp group string max-retries-not-estab number | |
| Tree | max-retries-not-estab | |
| Range | 2 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
password string
protocol keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Protocol version | |
| Context | configure service vprn string l2tp group string protocol keyword | |
| Tree | protocol | |
| Options | ||
| Default | v2 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
radius-accounting-policy reference
| Synopsis | RADIUS accounting policy | |
| Context | configure service vprn string l2tp group string radius-accounting-policy reference | |
| Tree | radius-accounting-policy | |
Reference | configure aaa radius l2tp-accounting-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive-window-size number
| Synopsis | L2TP receive window size | |
| Context | configure service vprn string l2tp group string receive-window-size number | |
| Tree | receive-window-size | |
| Range | 4 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-assign-method keyword
| Synopsis | Session assignment method | |
| Context | configure service vprn string l2tp group string session-assign-method keyword | |
| Tree | session-assign-method | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit (number | keyword)
| Synopsis | Session limit | |
| Context | configure service vprn string l2tp group string session-limit (number | keyword) | |
| Tree | session-limit | |
| Range | 1 to 250000 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tunnel [tunnel-name] string
[tunnel-name] string
admin-state keyword
| Synopsis | Administrative state of the L2TP tunnel | |
| Context | configure service vprn string l2tp group string tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-establish boolean
| Synopsis | Allow the tunnel to be automatically set up by the system | |
| Context | configure service vprn string l2tp group string tunnel string auto-establish boolean | |
| Tree | auto-establish | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
avp-hiding keyword
| Synopsis | The AVP hiding algorithm | |
| Context | configure service vprn string l2tp group string tunnel string avp-hiding keyword | |
| Tree | avp-hiding | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
challenge keyword
description string
| Synopsis | Text description | |
| Context | configure service vprn string l2tp group string tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destruct-timeout number
| Synopsis | Destruction timeout | |
| Context | configure service vprn string l2tp group string tunnel string destruct-timeout number | |
| Tree | destruct-timeout | |
| Range | 60 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failover
recovery-method keyword
| Synopsis | Recovery method of the sequence numbers after failover | |
| Context | configure service vprn string l2tp group string tunnel string failover recovery-method keyword | |
| Tree | recovery-method | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
recovery-time number
| Synopsis | Time requested from the L2TP peer before assuming failover as failed | |
| Context | configure service vprn string l2tp group string tunnel string failover recovery-time number | |
| Tree | recovery-time | |
| Range | 0 to 900 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hello-interval (number | keyword)
| Synopsis | Hello interval | |
| Context | configure service vprn string l2tp group string tunnel string hello-interval (number | keyword) | |
| Tree | hello-interval | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
idle-timeout (number | keyword)
| Synopsis | Idle timeout | |
| Context | configure service vprn string l2tp group string tunnel string idle-timeout (number | keyword) | |
| Tree | idle-timeout | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2tpv3
private-tcp-mss-adjust (number | keyword)
| Synopsis | TCP maximum segment size (MSS) on private network | |
| Context | configure service vprn string l2tp group string tunnel string l2tpv3 private-tcp-mss-adjust (number | keyword) | |
| Tree | private-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
public-tcp-mss-adjust (number | keyword)
| Synopsis | TCP maximum segment size (MSS) on public network | |
| Context | configure service vprn string l2tp group string tunnel string l2tpv3 public-tcp-mss-adjust (number | keyword) | |
| Tree | public-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lac
df-bit keyword
lns
lns-group reference
load-balance-method keyword
| Synopsis | New sessions for L2TP ISA MDA | |
| Context | configure service vprn string l2tp group string tunnel string lns load-balance-method keyword | |
| Tree | load-balance-method | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mlppp
admin-state keyword
| Synopsis | Administrative state of MLPPP in the L2TP tunnel | |
| Context | configure service vprn string l2tp group string tunnel string lns mlppp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
endpoint
ip (ipv4-address | keyword)
mac (mac-address | keyword)
interleave keyword
| Synopsis | Use of Link fragmentation and interleaving | |
| Context | configure service vprn string l2tp group string tunnel string lns mlppp interleave keyword | |
| Tree | interleave | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
max-fragment-delay number
| Synopsis | Maximum fragment delay caused by transmission on a link | |
| Context | configure service vprn string l2tp group string tunnel string lns mlppp max-fragment-delay number | |
| Tree | max-fragment-delay | |
| Range | 5 to 1000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
max-links number
reassembly-timeout number
| Synopsis | Reassembly timeout | |
| Context | configure service vprn string l2tp group string tunnel string lns mlppp reassembly-timeout number | |
| Tree | reassembly-timeout | |
| Range | 100 | 1000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
short-sequence-numbers keyword
| Synopsis | Request a peer to send short sequence numbers | |
| Context | configure service vprn string l2tp group string tunnel string lns mlppp short-sequence-numbers keyword | |
| Tree | short-sequence-numbers | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s |
ppp
authentication keyword
| Synopsis | PPP authentication protocol to negotiate | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp authentication keyword | |
| Tree | authentication | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication-policy string
| Synopsis | Authentication policy when a DHCP message is received | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp authentication-policy string | |
| Tree | authentication-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
chap-challenge-length
| Synopsis | Enter the chap-challenge-length context | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp chap-challenge-length | |
| Tree | chap-challenge-length | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
end number
start number
default-group-interface
| Synopsis | Enter the default-group-interface context | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp default-group-interface | |
| Tree | default-group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface string
service-name string
| Synopsis | Administrative service name | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp default-group-interface service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipcp-subnet-negotiation keyword
| Synopsis | Use of IPCP subnet negotiation for PPPoE hosts | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp ipcp-subnet-negotiation keyword | |
| Tree | ipcp-subnet-negotiation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
keepalive
interval number
multiplier number
| Synopsis | PPP keepalive multiplier | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp keepalive multiplier number | |
| Tree | multiplier | |
| Range | 1 to 5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lcp-force-ack-accm keyword
| Synopsis | Forced acknowledgement of the LCP Asynchronous Control Character Map (ACCM) option | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp lcp-force-ack-accm keyword | |
| Tree | lcp-force-ack-accm | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lcp-ignore-magic-numbers keyword
| Synopsis | Magic-Number field in LCP Echo-Request and LCP Echo-Reply messages that are checked | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp lcp-ignore-magic-numbers keyword | |
| Tree | lcp-ignore-magic-numbers | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mtu number
proxy-authentication keyword
| Synopsis | Authentication AVPs that are received from LAC | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp proxy-authentication keyword | |
| Tree | proxy-authentication | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
proxy-lcp keyword
reject-disabled-ncp keyword
| Synopsis | Force LCP Project Reject for IPv6CP Configure Request | |
| Context | configure service vprn string l2tp group string tunnel string lns ppp reject-disabled-ncp keyword | |
| Tree | reject-disabled-ncp | |
| Options | ||
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
user-db string
local-address string
| Synopsis | Local address | |
| Context | configure service vprn string l2tp group string tunnel string local-address string | |
| Tree | local-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-name string
| Synopsis | Local host name used to distinguish tunnels | |
| Context | configure service vprn string l2tp group string tunnel string local-name string | |
| Tree | local-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-estab number
| Synopsis | Maximum retries for established tunnels | |
| Context | configure service vprn string l2tp group string tunnel string max-retries-estab number | |
| Tree | max-retries-estab | |
| Range | 2 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-not-estab number
| Synopsis | Maximum retries for unestablished tunnels | |
| Context | configure service vprn string l2tp group string tunnel string max-retries-not-estab number | |
| Tree | max-retries-not-estab | |
| Range | 2 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
password string
peer string
preference number
| Synopsis | Tunnel preference number with its group | |
| Context | configure service vprn string l2tp group string tunnel string preference number | |
| Tree | preference | |
| Range | 0 to 16777215 | |
| Default | 50 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-accounting-policy reference
| Synopsis | RADIUS accounting policy | |
| Context | configure service vprn string l2tp group string tunnel string radius-accounting-policy reference | |
| Tree | radius-accounting-policy | |
Reference | configure aaa radius l2tp-accounting-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive-window-size number
| Synopsis | L2TP receive window size | |
| Context | configure service vprn string l2tp group string tunnel string receive-window-size number | |
| Tree | receive-window-size | |
| Range | 4 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-name string
| Synopsis | Remote tunnel host name | |
| Context | configure service vprn string l2tp group string tunnel string remote-name string | |
| Tree | remote-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit (number | keyword)
| Synopsis | L2TP session limit for each tunnel of this router | |
| Context | configure service vprn string l2tp group string tunnel string session-limit (number | keyword) | |
| Tree | session-limit | |
| Range | 1 to 65534 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-session-limit number
| Synopsis | L2TP session limit for each group of this router | |
| Context | configure service vprn string l2tp group-session-limit number | |
| Tree | group-session-limit | |
| Range | 1 to 250000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hello-interval (number | keyword)
| Synopsis | Hello interval | |
| Context | configure service vprn string l2tp hello-interval (number | keyword) | |
| Tree | hello-interval | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
idle-timeout (number | keyword)
| Synopsis | Idle timeout | |
| Context | configure service vprn string l2tp idle-timeout (number | keyword) | |
| Tree | idle-timeout | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-avps
| Synopsis | Enter the ignore-avps context | |
| Context | configure service vprn string l2tp ignore-avps | |
| Tree | ignore-avps | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sequencing-required boolean
| Synopsis | Ignore Sequencing Required AVP | |
| Context | configure service vprn string l2tp ignore-avps sequencing-required boolean | |
| Tree | sequencing-required | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2tpv3
cookie-length number
| Synopsis | Cookie field length | |
| Context | configure service vprn string l2tp l2tpv3 cookie-length number | |
| Tree | cookie-length | |
| Range | 4 | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
digest-type keyword
| Synopsis | Hashing algorithm that calculates the message digest | |
| Context | configure service vprn string l2tp l2tpv3 digest-type keyword | |
| Tree | digest-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nonce-length number
| Synopsis | Length of the local L2TPv3 nonce (random number) | |
| Context | configure service vprn string l2tp l2tpv3 nonce-length number | |
| Tree | nonce-length | |
| Range | 0 | 16 to 64 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
password string
private-tcp-mss-adjust number
| Synopsis | TCP maximum segment size (MSS) on private network | |
| Context | configure service vprn string l2tp l2tpv3 private-tcp-mss-adjust number | |
| Tree | private-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
public-tcp-mss-adjust number
| Synopsis | TCP maximum segment size (MSS) on public network | |
| Context | configure service vprn string l2tp l2tpv3 public-tcp-mss-adjust number | |
| Tree | public-tcp-mss-adjust | |
| Range | 512 to 9000 | |
| Units | octets | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transport-type
| Synopsis | Enter the transport-type context | |
| Context | configure service vprn string l2tp l2tpv3 transport-type | |
| Tree | transport-type | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip boolean
lac
calling-number-format string
| Synopsis | Calling Number AVP for L2TP control messages | |
| Context | configure service vprn string l2tp lac calling-number-format string | |
| Tree | calling-number-format | |
| String Length | 1 to 255 | |
| Default | %S %s | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cisco-nas-port
| Synopsis | Enter the cisco-nas-port context | |
| Context | configure service vprn string l2tp lac cisco-nas-port | |
| Tree | cisco-nas-port | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ethernet string
df-bit boolean
local-address string
| Synopsis | Local address | |
| Context | configure service vprn string l2tp local-address string | |
| Tree | local-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-name string
| Synopsis | Local host name | |
| Context | configure service vprn string l2tp local-name string | |
| Tree | local-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-estab number
| Synopsis | Maximum retries for established tunnels | |
| Context | configure service vprn string l2tp max-retries-estab number | |
| Tree | max-retries-estab | |
| Range | 2 to 7 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-retries-not-estab number
| Synopsis | Maximum retries for unestablished tunnels | |
| Context | configure service vprn string l2tp max-retries-not-estab number | |
| Tree | max-retries-not-estab | |
| Range | 2 to 7 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
next-attempt keyword
| Synopsis | Tunnel that is selected when previous session setup failed | |
| Context | configure service vprn string l2tp next-attempt keyword | |
| Tree | next-attempt | |
| Options | ||
| Default | next-preference-level | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
password string
peer-address-change-policy keyword
| Synopsis | Reaction for L2TP response from a different address | |
| Context | configure service vprn string l2tp peer-address-change-policy keyword | |
| Tree | peer-address-change-policy | |
| Options | ||
| Default | reject | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-accounting-policy reference
| Synopsis | RADIUS accounting policy | |
| Context | configure service vprn string l2tp radius-accounting-policy reference | |
| Tree | radius-accounting-policy | |
Reference | configure aaa radius l2tp-accounting-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive-window-size number
| Synopsis | L2TP receive window size | |
| Context | configure service vprn string l2tp receive-window-size number | |
| Tree | receive-window-size | |
| Range | 4 to 1024 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
replace-result-code
| Synopsis | Enter the replace-result-code context | |
| Context | configure service vprn string l2tp replace-result-code | |
| Tree | replace-result-code | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-invalid-dst boolean
| Synopsis | Replace result code with general error code | |
| Context | configure service vprn string l2tp replace-result-code cdn-invalid-dst boolean | |
| Tree | cdn-invalid-dst | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-permanent-no-facilities boolean
| Synopsis | Replace result code with general error | |
| Context | configure service vprn string l2tp replace-result-code cdn-permanent-no-facilities boolean | |
| Tree | cdn-permanent-no-facilities | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-temporary-no-facilities boolean
| Synopsis | Replace result code with general error | |
| Context | configure service vprn string l2tp replace-result-code cdn-temporary-no-facilities boolean | |
| Tree | cdn-temporary-no-facilities | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rtm-debounce-time (number | keyword)
| Synopsis | Debounce timer that declares L2TP action for route table management events | |
| Context | configure service vprn string l2tp rtm-debounce-time (number | keyword) | |
| Tree | rtm-debounce-time | |
| Range | 0 to 5000 | |
| Units | milliseconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-assign-method keyword
| Synopsis | Session assignment method | |
| Context | configure service vprn string l2tp session-assign-method keyword | |
| Tree | session-assign-method | |
| Options | ||
| Default | existing-first | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | L2TP session limit of this router | |
| Context | configure service vprn string l2tp session-limit number | |
| Tree | session-limit | |
| Range | 1 to 250000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tunnel-selection-blacklist
| Synopsis | Enter the tunnel-selection-blacklist context | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist | |
| Tree | tunnel-selection-blacklist | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
add-tunnel-on
| Synopsis | Enter the add-tunnel-on context | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on | |
| Tree | add-tunnel-on | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address-change-timeout boolean
| Synopsis | Enable a timed-out tunnel to be forced to the denylist | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on address-change-timeout boolean | |
| Tree | address-change-timeout | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-err-code boolean
| Synopsis | Add to deny if CDN is received with code: General error | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on cdn-err-code boolean | |
| Tree | cdn-err-code | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-invalid-dst boolean
| Synopsis | Force tunnel to the denylist in case of Result Codes 6 | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on cdn-invalid-dst boolean | |
| Tree | cdn-invalid-dst | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-permanent-no-facilities boolean
| Synopsis | Force tunnel to the denylist in case of Result Codes 5 | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on cdn-permanent-no-facilities boolean | |
| Tree | cdn-permanent-no-facilities | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cdn-temporary-no-facilities boolean
| Synopsis | Force tunnel to the denylist in case of Result Codes 4 | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on cdn-temporary-no-facilities boolean | |
| Tree | cdn-temporary-no-facilities | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stop-ccn-err-code boolean
| Synopsis | Add to denylist if received with general error code | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on stop-ccn-err-code boolean | |
| Tree | stop-ccn-err-code | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stop-ccn-other boolean
| Synopsis | Add to denylist if StopCCN received with general error | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on stop-ccn-other boolean | |
| Tree | stop-ccn-other | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tx-cdn-not-established-in-time boolean
| Synopsis | Add to denylist if CDN transmitted with result code | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist add-tunnel-on tx-cdn-not-established-in-time boolean | |
| Tree | tx-cdn-not-established-in-time | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-list-length (number | keyword)
| Synopsis | Number of tunnels or peers in the denylist | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist max-list-length (number | keyword) | |
| Tree | max-list-length | |
| Range | 1 to 65535 | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-time number
timeout-action keyword
| Synopsis | Action when a tunnel or peer exceeds time in denylist | |
| Context | configure service vprn string l2tp tunnel-selection-blacklist timeout-action keyword | |
| Tree | timeout-action | |
| Options | ||
| Default | remove-from-blacklist | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tunnel-session-limit number
| Synopsis | L2TP session limit for each tunnel of this router | |
| Context | configure service vprn string l2tp tunnel-session-limit number | |
| Tree | tunnel-session-limit | |
| Range | 1 to 65534 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
label-mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allocation mode for VPRN service labels | |
| Context | configure service vprn string label-mode keyword | |
| Tree | label-mode | |
| Options | ||
| Default | vrf | |
| Introduced | 16.0.R1 | |
Platforms | All | |
local-routes-domain-id string
| Synopsis | Local routes domain ID | |
| Context | configure service vprn string local-routes-domain-id string | |
| Tree | local-routes-domain-id | |
Description | This command specifies the domain ID that is used in the D-PATH attribute for local routes before those routes are exported to a BGP neighbor using BGP-IPVPN, EVPN-IFF, EVPN-IFL, or PE-CE BGP. A local route is a non-BGP route installed in the VPRN route table and learned using static route or an IGP. The domain IDs are used in the D-PATH attribute, in accordance with draft-ietf-bess-evpn-ipvpn-interworking. Gateway routers modify the D-PATH attribute. A gateway is a PE where a VPRN is instantiated. The VPRN in this case advertises or receives routes from multiple BGP owners (for example, EVPN IFL and BGP IPVPN). Gateways use the D-PATH attribute to detect loops (for received routes where the D-PATH contains a local domain ID) and to make BGP best-path selection decisions based on the D-PATH length (shorter D-PATH is preferred). | |
| Introduced | 21.10.R1 | |
Platforms | All |
log
filter [filter-name] string
[filter-name] string
default-action keyword
| Synopsis | Default action for the event filter | |
| Context | configure service vprn string log filter string default-action keyword | |
| Tree | default-action | |
| Options | ||
| Default | forward | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string log filter string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
named-entry [entry-name] string
| Synopsis | Enter the named-entry list instance | |
| Context | configure service vprn string log filter string named-entry string | |
| Tree | named-entry | |
Description | Commands in this context create or edit an event filter entry. | |
| Max. Instances | 999 | |
Notes | This element is ordered by the user. | |
| Introduced | 21.2.R1 | |
Platforms | All |
[entry-name] string
| Synopsis | Entry name | |
| Context | configure service vprn string log filter string named-entry string | |
| Tree | named-entry | |
| String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 21.2.R1 | |
Platforms | All |
action keyword
description string
| Synopsis | Text description | |
| Context | configure service vprn string log filter string named-entry string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 21.2.R1 | |
Platforms | All |
match
application
| Synopsis | Enter the application context | |
| Context | configure service vprn string log filter string named-entry string match application | |
| Tree | application | |
| Introduced | 21.2.R1 | |
Platforms | All |
eq keyword
| Synopsis | Application to match | |
| Context | configure service vprn string log filter string named-entry string match application eq keyword | |
| Tree | eq | |
| Options | ||
|
Notes | The following elements are part of a choice: eq or neq. | |
| Introduced | 21.2.R1 | |
Platforms | All |
neq keyword
| Synopsis | Application to be filtered out | |
| Context | configure service vprn string log filter string named-entry string match application neq keyword | |
| Tree | neq | |
| Options | ||
|
Notes | The following elements are part of a choice: eq or neq. | |
| Introduced | 21.2.R1 | |
Platforms | All |
event
eq number
gt number
gte number
lt number
lte number
neq number
message
eq string
neq string
regexp boolean
severity
eq keyword
gt keyword
gte keyword
lt keyword
lte keyword
neq keyword
subject
eq string
neq string
regexp boolean
log-id [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the log | |
| Context | configure service vprn string log log-id string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string log log-id string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
destination
| Synopsis | Enter the destination context | |
| Context | configure service vprn string log log-id string destination | |
| Tree | destination | |
| Introduced | 16.0.R1 | |
Platforms | All |
netconf
max-entries number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Number of events stored in the NETCONF log | |
| Context | configure service vprn string log log-id string destination netconf max-entries number | |
| Tree | max-entries | |
| Range | 50 to 3000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
snmp
max-entries number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Number of events stored in the memory log | |
| Context | configure service vprn string log log-id string destination snmp max-entries number | |
| Tree | max-entries | |
| Range | 50 to 3000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All | |
syslog reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Index with the information to format event messages sent to a specific SYSLOG collector | |
| Context | configure service vprn string log log-id string destination syslog reference | |
| Tree | syslog | |
Reference | ||
Notes | The following elements are part of a choice: netconf, snmp, or syslog. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
filter reference
netconf-stream string
| Synopsis | Destination NETCONF stream name | |
| Context | configure service vprn string log log-id string netconf-stream string | |
| Tree | netconf-stream | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
python-policy reference
| Synopsis | Python policy name | |
| Context | configure service vprn string log log-id string python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
source
change boolean
debug boolean
main boolean
security boolean
time-format keyword
| Synopsis | Time zone output for file log contents and syslog | |
| Context | configure service vprn string log log-id string time-format keyword | |
| Tree | time-format | |
| Options | ||
| Default | utc | |
| Introduced | 16.0.R1 | |
Platforms | All |
snmp-trap-group [log-name] string
| Synopsis | Enter the snmp-trap-group list instance | |
| Context | configure service vprn string log snmp-trap-group string | |
| Tree | snmp-trap-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[log-name] string
| Synopsis | Log ID | |
| Context | configure service vprn string log snmp-trap-group string | |
| Tree | snmp-trap-group | |
| String Length | 1 to 17 | |
Notes | This element is part of a list key. | |
| Introduced | 21.2.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string log snmp-trap-group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
trap-target [name] string
| Synopsis | Enter the trap-target list instance | |
| Context | configure service vprn string log snmp-trap-group string trap-target string | |
| Tree | trap-target | |
| Max. Instances | 25 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[name] string
| Synopsis | Trap target name | |
| Context | configure service vprn string log snmp-trap-group string trap-target string | |
| Tree | trap-target | |
| String Length | 1 to 28 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the trap receiver | |
| Context | configure service vprn string log snmp-trap-group string trap-target string address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string log snmp-trap-group string trap-target string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
notify-community string
| Synopsis | SNMPv1 or SNMPv2c community name string, or SNMPv3 security name, for sending a notification | |
| Context | configure service vprn string log snmp-trap-group string trap-target string notify-community string | |
| Tree | notify-community | |
| String Length | 1 to 31 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
port number
| Synopsis | UDP port number to send messages to this remote SNMP notification collector | |
| Context | configure service vprn string log snmp-trap-group string trap-target string port number | |
| Tree | port | |
| Range | 0 | 1 to 65535 | |
| Default | 162 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
replay boolean
| Synopsis | Retransmit missed notifications | |
| Context | configure service vprn string log snmp-trap-group string trap-target string replay boolean | |
| Tree | replay | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
security-level keyword
| Synopsis | Security level at which SNMP notification messages are sent to SNMP notification collector | |
| Context | configure service vprn string log snmp-trap-group string trap-target string security-level keyword | |
| Tree | security-level | |
| Options | ||
| Default | no-auth-no-privacy | |
| Introduced | 16.0.R1 | |
Platforms | All |
version keyword
| Synopsis | SNMP version to format notification messages sent to this SNMP notification collector | |
| Context | configure service vprn string log snmp-trap-group string trap-target string version keyword | |
| Tree | version | |
| Options | ||
| Default | snmpv3 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
syslog [syslog-name] string
[syslog-name] string
address (ipv4-address-no-zone | ipv6-address-no-zone)
description string
| Synopsis | Text description | |
| Context | configure service vprn string log syslog string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
facility keyword
hostname
| Synopsis | Enter the hostname context | |
| Context | configure service vprn string log syslog string hostname | |
| Tree | hostname | |
Description | Commands in this context control how the HOSTNAME field of syslog messages is populated. If no command option is configured, the HOSTNAME is populated with an IP address. | |
| Introduced | 23.7.R1 | |
Platforms | All |
use-system-name
| Synopsis | Enable the use-system-name context | |
| Context | configure service vprn string log syslog string hostname use-system-name | |
| Tree | use-system-name | |
Description | Commands in this context configure the system to use the system name configured with the configure system name command as the HOSTNAME field of syslog messages. Do not use any spaces in the system name if it is used for the syslog HOSTNAME. | |
Notes | The following elements are part of a choice: use-system-name, use-vprn-name, or value. | |
| Introduced | 23.7.R1 | |
Platforms | All |
use-vprn-name
| Synopsis | Enable the use-vprn-name context | |
| Context | configure service vprn string log syslog string hostname use-vprn-name | |
| Tree | use-vprn-name | |
Description | Commands in this context configure the system to use the VPRN service name configured with the configure service vprn service-name command as the HOSTNAME field of syslog messages sent in this VPRN. Do not use any spaces in the VPRN name if it is used for the syslog HOSTNAME. | |
Notes | The following elements are part of a choice: use-system-name, use-vprn-name, or value. | |
| Introduced | 23.7.R1 | |
Platforms | All |
value string
| Synopsis | Syslog HOSTNAME field value | |
| Context | configure service vprn string log syslog string hostname value string | |
| Tree | value | |
Description | This command configures a string as the HOSTNAME field of syslog messages. Do not use any spaces in the string used for the syslog HOSTNAME. | |
| String Length | 1 to 255 | |
Notes | The following elements are part of a choice: use-system-name, use-vprn-name, or value. | |
| Introduced | 23.7.R1 | |
Platforms | All |
log-prefix (keyword | string)
| Synopsis | Prefix string to log message sent to target syslog host | |
| Context | configure service vprn string log syslog string log-prefix (keyword | string) | |
| Tree | log-prefix | |
| String Length | 1 to 32 | |
| Options | ||
| Default | TMNX | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
port number
severity keyword
tls-client-profile reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | TLS client profile used to encrypt syslog communication | |
| Context | configure service vprn string log syslog string tls-client-profile reference | |
| Tree | tls-client-profile | |
Description | This command specifies the Transport Layer Security (TLS) client profile used to encrypt syslog communications. When configured, syslog messages are sent using TLS. Any change to this command results in a brief interruption of the event log, which may cause the loss of a few syslog messages. When this command is unconfigured, the syslog messages are sent over UDP. | |
Reference | configure system security tls client-tls-profile string | |
| Introduced | 21.10.R1 | |
Platforms | All | |
management
| Synopsis | Enable the management context | |
| Context | configure service vprn string management | |
| Tree | management | |
| Introduced | 16.0.R4 | |
Platforms | All |
allow-ftp boolean
| Synopsis | Allow access to the FTP server | |
| Context | configure service vprn string management allow-ftp boolean | |
| Tree | allow-ftp | |
Description | When configured to true, this command allows FTP access to the SR OS router via the VPRN router instance. When configured to false, this command disallows access to the SR OS FTP server. | |
| Default | false | |
| Introduced | 16.0.R6 | |
|
Platforms | All |
allow-grpc boolean
| Synopsis | Allow access to the gRPC server | |
| Context | configure service vprn string management allow-grpc boolean | |
| Tree | allow-grpc | |
Description | When configured to true, this command allows access to the gRPC server via the VPRN router instance. When configured to false, this command disallows gRPC server access. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
allow-netconf boolean
| Synopsis | Allow access to the NETCONF server | |
| Context | configure service vprn string management allow-netconf boolean | |
| Tree | allow-netconf | |
Description | When configured to true, this command allows NETCONF server access to the SR OS router via the VPRN router instance. When configured to false, this command disallows access to the NETCONF server. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
allow-ssh boolean
| Synopsis | Allow access to the SSH server | |
| Context | configure service vprn string management allow-ssh boolean | |
| Tree | allow-ssh | |
Description | When configured to true, this command allows SSH server access to the SR OS router via the VPRN router instance. When configured to false, this command disallows SSH server access. | |
| Default | false | |
| Introduced | 16.0.R5 | |
|
Platforms | All |
allow-telnet boolean
| Synopsis | Allow access to the IPv4 Telnet server | |
| Context | configure service vprn string management allow-telnet boolean | |
| Tree | allow-telnet | |
Description | When configured to true, this command allows IPv4 Telnet server access to the SR OS router via the VPRN router instance. When configured to false, this command disallows access to the IPv4 Telnet server. | |
| Default | false | |
| Introduced | 16.0.R5 | |
|
Platforms | All |
allow-telnet6 boolean
| Synopsis | Allow access to the Telnet IPv6 server | |
| Context | configure service vprn string management allow-telnet6 boolean | |
| Tree | allow-telnet6 | |
Description | When configured to true, this command allows IPv6 Telnet server access to the SR OS router via the VPRN router instance. When configured to false, this command removes access to the IPv6 Telnet server. | |
| Default | false | |
| Introduced | 16.0.R5 | |
|
Platforms | All |
maximum-ipv4-routes
| Synopsis | Enter the maximum-ipv4-routes context | |
| Context | configure service vprn string maximum-ipv4-routes | |
| Tree | maximum-ipv4-routes | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-only boolean
| Synopsis | Action when the maximum number of routes, held within a VRF context, is reached | |
| Context | configure service vprn string maximum-ipv4-routes log-only boolean | |
| Tree | log-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
| Synopsis | Mid-level water marker for the number of routes which this VRF holds | |
| Context | configure service vprn string maximum-ipv4-routes threshold number | |
| Tree | threshold | |
| Range | 1 to 100 | |
| Units | percent | |
| Introduced | 16.0.R1 | |
Platforms |
All |
value number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of routes that are configured on this virtual router | |
| Context | configure service vprn string maximum-ipv4-routes value number | |
| Tree | value | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
maximum-ipv6-routes
| Synopsis | Enter the maximum-ipv6-routes context | |
| Context | configure service vprn string maximum-ipv6-routes | |
| Tree | maximum-ipv6-routes | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-only boolean
| Synopsis | Action when the maximum number of routes, held within a VRF context, is reached | |
| Context | configure service vprn string maximum-ipv6-routes log-only boolean | |
| Tree | log-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
| Synopsis | Mid-level water marker for the number of routes which this VRF holds | |
| Context | configure service vprn string maximum-ipv6-routes threshold number | |
| Tree | threshold | |
| Range | 1 to 100 | |
| Units | percent | |
| Introduced | 16.0.R1 | |
Platforms |
All |
value number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of routes that are configured on this virtual router | |
| Context | configure service vprn string maximum-ipv6-routes value number | |
| Tree | value | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
mc-maximum-routes
| Synopsis | Enter the mc-maximum-routes context | |
| Context | configure service vprn string mc-maximum-routes | |
| Tree | mc-maximum-routes | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-only boolean
| Synopsis | Log and allow learning of new multicast routes | |
| Context | configure service vprn string mc-maximum-routes log-only boolean | |
| Tree | log-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
threshold number
| Synopsis | Maximum multicast routes which the VRF holds | |
| Context | configure service vprn string mc-maximum-routes threshold number | |
| Tree | threshold | |
| Range | 1 to 100 | |
| Units | percent | |
| Introduced | 16.0.R1 | |
Platforms |
All |
value number
| Synopsis | Maximum multicast routes configured on virtual router | |
| Context | configure service vprn string mc-maximum-routes value number | |
| Tree | value | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All |
mld
admin-state keyword
| Synopsis | Administrative state of MLD | |
| Context | configure service vprn string mld admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
forwarding-group-interface forwarding-service string group-interface-name reference
| Synopsis | Enter the forwarding-group-interface list instance | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
forwarding-service string
| Synopsis | Forwarding service for a subscriber interface in a retailer context | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
| String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-interface-name reference
| Synopsis | Group interface name | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference | |
| Tree | forwarding-group-interface | |
Reference | configure service vprn string subscriber-interface string group-interface string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the MLD interface | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy to filter MLD packets | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mcac
| Synopsis | Enter the mcac context | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac | |
| Tree | mcac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bandwidth
| Synopsis | Enter the bandwidth context | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth | |
| Tree | bandwidth | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mandatory (number | keyword)
| Synopsis | Pre-reserved bandwidth for all mandatory channels | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth mandatory (number | keyword) | |
| Tree | mandatory | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
total (number | keyword)
| Synopsis | Maximum allowed bandwidth | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac bandwidth total (number | keyword) | |
| Tree | total | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-source-address string
| Synopsis | Source address for MLD queries | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference query-source-address string | |
| Tree | query-source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-hosts-only boolean
| Synopsis | Allow MLD traffic from known hosts only | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference sub-hosts-only boolean | |
| Tree | sub-hosts-only | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subnet-check boolean
| Synopsis | Enable subnet checking | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference subnet-check boolean | |
| Tree | subnet-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
version keyword
| Synopsis | MLD protocol version | |
| Context | configure service vprn string mld forwarding-group-interface forwarding-service string group-interface-name reference version keyword | |
| Tree | version | |
| Options | ||
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-if-query-source-address string
| Synopsis | Source address in queries for group interfaces when not configured at group interface level | |
| Context | configure service vprn string mld group-if-query-source-address string | |
| Tree | group-if-query-source-address | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-interface [group-interface-name] reference
| Synopsis | Enter the group-interface list instance | |
| Context | configure service vprn string mld group-interface reference | |
| Tree | group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[group-interface-name] reference
| Synopsis | Group interface name | |
| Context | configure service vprn string mld group-interface reference | |
| Tree | group-interface | |
Reference | configure service vprn string subscriber-interface string group-interface string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the MLD interface | |
| Context | configure service vprn string mld group-interface reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy to filter MLD packets | |
| Context | configure service vprn string mld group-interface reference import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string mld group-interface reference maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string mld group-interface reference maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string mld group-interface reference maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mcac
bandwidth
mandatory (number | keyword)
| Synopsis | Pre-reserved bandwidth for all mandatory channels | |
| Context | configure service vprn string mld group-interface reference mcac bandwidth mandatory (number | keyword) | |
| Tree | mandatory | |
| Range | 0 to 2147483647 | |
| Options | ||
| Default | unlimited | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string mld group-interface reference mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string mld group-interface reference mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string mld group-interface reference query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string mld group-interface reference query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string mld group-interface reference query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
query-source-address string
| Synopsis | Source address for MLD queries | |
| Context | configure service vprn string mld group-interface reference query-source-address string | |
| Tree | query-source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string mld group-interface reference router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-hosts-only boolean
| Synopsis | Allow MLD traffic from known hosts only | |
| Context | configure service vprn string mld group-interface reference sub-hosts-only boolean | |
| Tree | sub-hosts-only | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subnet-check boolean
| Synopsis | Enable subnet checking | |
| Context | configure service vprn string mld group-interface reference subnet-check boolean | |
| Tree | subnet-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
version keyword
interface [ip-interface-name] string
[ip-interface-name] string
admin-state keyword
| Synopsis | Administrative state of the MLD interface | |
| Context | configure service vprn string mld interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Import policy to filter MLD packets | |
| Context | configure service vprn string mld interface string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | All |
maximum-number-group-sources number
| Synopsis | Maximum number of group sources for this interface | |
| Context | configure service vprn string mld interface string maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
Description | This command configures the maximum number of group sources for which IGMP or MLD can have local receiver information based on received IGMP or MLD reports on this interface. When this configuration is changed dynamically to a lower value than the currently accepted number of group sources, the group sources that are already accepted are not deleted. Only new group sources are not allowed. | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-groups number
| Synopsis | Maximum number of groups for this interface | |
| Context | configure service vprn string mld interface string maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
maximum-number-sources number
| Synopsis | Maximum number of sources that are allowed per group | |
| Context | configure service vprn string mld interface string maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string mld interface string mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
mc-constraints
| Synopsis | Enter the mc-constraints context | |
| Context | configure service vprn string mld interface string mcac mc-constraints | |
| Tree | mc-constraints | |
| Introduced | 16.0.R1 | |
Platforms | All |
level [level-id] number
[level-id] number
bandwidth number
number-down [number-lag-port-down] number
| Synopsis | Enter the number-down list instance | |
| Context | configure service vprn string mld interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Introduced | 16.0.R1 | |
Platforms | All |
[number-lag-port-down] number
| Synopsis | Number of ports that are down in this LAG link | |
| Context | configure service vprn string mld interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Range | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
level number
| Synopsis | Level ID to associate with number of down LAG ports | |
| Context | configure service vprn string mld interface string mcac mc-constraints number-down number level number | |
| Tree | level | |
Description | This command specifies the bandwidth for a given level. Level 1 has the highest priority and level 8 has the lowest priority. | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-lag-port-weight boolean
| Synopsis | Use LAG port weight in calculating MCAC constraints | |
| Context | configure service vprn string mld interface string mcac mc-constraints use-lag-port-weight boolean | |
| Tree | use-lag-port-weight | |
Description | When configured to true, port weight is used when determining available bandwidth per level when LAG ports go down or come up. This command is required for proper operation on mixed port-speed LAGs and can also be used for unmixed port-speed LAGs. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string mld interface string mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string mld interface string query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string mld interface string query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string mld interface string query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
router-alert-check boolean
| Synopsis | Enable router alert checking for IGMP or MLD messages | |
| Context | configure service vprn string mld interface string router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ssm-translate
| Synopsis | Enter the ssm-translate context | |
| Context | configure service vprn string mld interface string ssm-translate | |
| Tree | ssm-translate | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range start string end string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string mld interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | Lower bound of the group range | |
| Context | configure service vprn string mld interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | Upper bound of the group range | |
| Context | configure service vprn string mld interface string ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
| Synopsis | Add a list entry for source | |
| Context | configure service vprn string mld interface string ssm-translate group-range start string end string source string | |
| Tree | source | |
| Min. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[source-address] string
| Synopsis | Source IP address | |
| Context | configure service vprn string mld interface string ssm-translate group-range start string end string source string | |
| Tree | source | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R2 | |
Platforms | All |
static
group [group-address] string
[group-address] string
source [source-address] string
[source-address] string
starg
group-range start string end string step string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string mld interface string static group-range start string end string step string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | Lower bound of the static multicast group | |
| Context | configure service vprn string mld interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | Upper bound of the static multicast group | |
| Context | configure service vprn string mld interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
step string
| Synopsis | Step interval for the group-range addresses | |
| Context | configure service vprn string mld interface string static group-range start string end string step string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
[source-address] string
starg
version keyword
query-interval number
| Synopsis | Time between two consecutive host-query messages | |
| Context | configure service vprn string mld query-interval number | |
| Tree | query-interval | |
| Range | 2 to 1024 | |
| Units | seconds | |
| Default | 125 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-last-member-interval number
| Synopsis | Time between group-specific query messages | |
| Context | configure service vprn string mld query-last-member-interval number | |
| Tree | query-last-member-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
query-response-interval number
| Synopsis | Time to wait for a response to the host-query messages | |
| Context | configure service vprn string mld query-response-interval number | |
| Tree | query-response-interval | |
| Range | 1 to 1023 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
robust-count number
| Synopsis | Number of retries after expected message loss | |
| Context | configure service vprn string mld robust-count number | |
| Tree | robust-count | |
| Range | 2 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ssm-translate
| Synopsis | Enter the ssm-translate context | |
| Context | configure service vprn string mld ssm-translate | |
| Tree | ssm-translate | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range start string end string
| Synopsis | Enter the group-range list instance | |
| Context | configure service vprn string mld ssm-translate group-range start string end string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
start string
| Synopsis | Lower bound of the group range | |
| Context | configure service vprn string mld ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end string
| Synopsis | Upper bound of the group range | |
| Context | configure service vprn string mld ssm-translate group-range start string end string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
source [source-address] string
| Synopsis | Add a list entry for source | |
| Context | configure service vprn string mld ssm-translate group-range start string end string source string | |
| Tree | source | |
| Min. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[source-address] string
| Synopsis | Source IP address | |
| Context | configure service vprn string mld ssm-translate group-range start string end string source string | |
| Tree | source | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R2 | |
Platforms | All |
msdp
active-source-limit number
| Synopsis | Maximum number of active messages accepted by MSDP | |
| Context | configure service vprn string msdp active-source-limit number | |
| Tree | active-source-limit | |
| Range | 0 to 1000000 | |
| Introduced | 19.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MSDP | |
| Context | configure service vprn string msdp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.10.R1 | |
Platforms | All |
data-encapsulation boolean
| Synopsis | Enable encapsulation of multicast data used by MSDP | |
| Context | configure service vprn string msdp data-encapsulation boolean | |
| Tree | data-encapsulation | |
| Default | true | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
export-policy reference
| Synopsis | Policies to export source active state into MSDP | |
| Context | configure service vprn string msdp export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
group [name] string
[name] string
active-source-limit number
| Synopsis | Maximum number of active messages accepted by MSDP | |
| Context | configure service vprn string msdp group string active-source-limit number | |
| Tree | active-source-limit | |
| Range | 0 to 1000000 | |
| Introduced | 19.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MSDP | |
| Context | configure service vprn string msdp group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.10.R1 | |
Platforms | All |
export-policy reference
| Synopsis | Policies to export source active state into MSDP | |
| Context | configure service vprn string msdp group string export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Policy to import source active state from MSDP | |
| Context | configure service vprn string msdp group string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
local-address string
| Synopsis | Local end of an MSDP session | |
| Context | configure service vprn string msdp group string local-address string | |
| Tree | local-address | |
| Introduced | 19.10.R1 | |
Platforms | All |
mode keyword
peer [ip-address] string
[ip-address] string
active-source-limit number
| Synopsis | Maximum number of active messages accepted by MSDP | |
| Context | configure service vprn string msdp group string peer string active-source-limit number | |
| Tree | active-source-limit | |
| Range | 0 to 1000000 | |
| Introduced | 19.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MSDP | |
| Context | configure service vprn string msdp group string peer string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.10.R1 | |
Platforms | All |
authentication-key string
| Synopsis | MD5 authentication key for the MSDP peering session | |
| Context | configure service vprn string msdp group string peer string authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 370 | |
| Introduced | 19.10.R1 | |
Platforms | All |
default-peer boolean
| Synopsis | Enable/Disable default peer as MSDP peer | |
| Context | configure service vprn string msdp group string peer string default-peer boolean | |
| Tree | default-peer | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
export-policy reference
| Synopsis | Policies to export source active state into MSDP | |
| Context | configure service vprn string msdp group string peer string export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Policy to import source active state from MSDP | |
| Context | configure service vprn string msdp group string peer string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
local-address string
| Synopsis | Local end of an MSDP session | |
| Context | configure service vprn string msdp group string peer string local-address string | |
| Tree | local-address | |
| Introduced | 19.10.R1 | |
Platforms | All |
receive-message-rate
| Synopsis | Enter the receive-message-rate context | |
| Context | configure service vprn string msdp group string peer string receive-message-rate | |
| Tree | receive-message-rate | |
| Introduced | 19.10.R1 | |
Platforms | All |
rate number
threshold number
time number
receive-message-rate
| Synopsis | Enter the receive-message-rate context | |
| Context | configure service vprn string msdp group string receive-message-rate | |
| Tree | receive-message-rate | |
| Introduced | 19.10.R1 | |
Platforms | All |
rate number
threshold number
time number
import-policy reference
| Synopsis | Policy to import source active state from MSDP | |
| Context | configure service vprn string msdp import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
local-address string
| Synopsis | Local end of an MSDP session | |
| Context | configure service vprn string msdp local-address string | |
| Tree | local-address | |
| Introduced | 19.10.R1 | |
Platforms | All |
peer [ip-address] string
[ip-address] string
active-source-limit number
| Synopsis | Maximum number of active messages accepted by MSDP | |
| Context | configure service vprn string msdp peer string active-source-limit number | |
| Tree | active-source-limit | |
| Range | 0 to 1000000 | |
| Introduced | 19.10.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of MSDP | |
| Context | configure service vprn string msdp peer string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.10.R1 | |
Platforms | All |
authentication-key string
| Synopsis | MD5 authentication key for the MSDP peering session | |
| Context | configure service vprn string msdp peer string authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 370 | |
| Introduced | 19.10.R1 | |
Platforms | All |
default-peer boolean
| Synopsis | Enable/Disable default peer as MSDP peer | |
| Context | configure service vprn string msdp peer string default-peer boolean | |
| Tree | default-peer | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | All |
export-policy reference
| Synopsis | Policies to export source active state into MSDP | |
| Context | configure service vprn string msdp peer string export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Policy to import source active state from MSDP | |
| Context | configure service vprn string msdp peer string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 19.10.R1 | |
Platforms | All |
local-address string
| Synopsis | Local end of an MSDP session | |
| Context | configure service vprn string msdp peer string local-address string | |
| Tree | local-address | |
| Introduced | 19.10.R1 | |
Platforms | All |
receive-message-rate
| Synopsis | Enter the receive-message-rate context | |
| Context | configure service vprn string msdp peer string receive-message-rate | |
| Tree | receive-message-rate | |
| Introduced | 19.10.R1 | |
Platforms | All |
rate number
threshold number
time number
receive-message-rate
| Synopsis | Enter the receive-message-rate context | |
| Context | configure service vprn string msdp receive-message-rate | |
| Tree | receive-message-rate | |
| Introduced | 19.10.R1 | |
Platforms | All |
rate number
threshold number
time number
rpf-table keyword
source [ip-prefix] string
[ip-prefix] string
active-source-limit number
| Synopsis | Number of active source messages accepted by MSDP | |
| Context | configure service vprn string msdp source string active-source-limit number | |
| Tree | active-source-limit | |
| Range | 0 to 1000000 | |
| Introduced | 19.10.R1 | |
Platforms | All |
source-active-cache-lifetime number
| Synopsis | Lifetime of SA entries in the cache | |
| Context | configure service vprn string msdp source-active-cache-lifetime number | |
| Tree | source-active-cache-lifetime | |
| Range | 90 to 600 | |
| Units | seconds | |
| Default | 90 | |
| Introduced | 19.10.R1 | |
Platforms | All |
mss-adjust
| Synopsis | Enable the mss-adjust context | |
| Context | configure service vprn string mss-adjust | |
| Tree | mss-adjust | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-group number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT group used for TCP-MSS adjustment | |
| Context | configure service vprn string mss-adjust nat-group number | |
| Tree | nat-group | |
| Max. Range | 0 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
segment-size number
| Synopsis | TCP-MSS option value in transmitted TCP SYN requests | |
| Context | configure service vprn string mss-adjust segment-size number | |
| Tree | segment-size | |
| Range | 160 to 10240 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mtrace2
admin-state keyword
| Synopsis | Administrative state of multicast path tracing | |
| Context | configure service vprn string mtrace2 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
udp-port number
multicast-info-policy reference
| Synopsis | Multicast policy name for virtual router | |
| Context | configure service vprn string multicast-info-policy reference | |
| Tree | multicast-info-policy | |
Reference | configure multicast-management multicast-info-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
mvpn
auto-discovery
| Synopsis | Enter the auto-discovery context | |
| Context | configure service vprn string mvpn auto-discovery | |
| Tree | auto-discovery | |
| Introduced | 19.5.R1 | |
Platforms | All |
source-address string
| Synopsis | IPv4 source address | |
| Context | configure service vprn string mvpn auto-discovery source-address string | |
| Tree | source-address | |
| Default | 0.0.0.0 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
type keyword
c-mcast-signaling keyword
| Synopsis | Protocol for PE-to-PE signaling of CE multicast states | |
| Context | configure service vprn string mvpn c-mcast-signaling keyword | |
| Tree | c-mcast-signaling | |
| Options | ||
| Default | pim | |
| Introduced | 19.5.R1 | |
Platforms | All |
intersite-shared
| Synopsis | Enter the intersite-shared context | |
| Context | configure service vprn string mvpn intersite-shared | |
| Tree | intersite-shared | |
Description | Commands in this context configure whether to use inter-site shared C-trees. Optional parameters allow enabling additional intersite shared functionality. Not specifying an optional parameter when executing the command disables that parameter. | |
| Introduced | 19.5.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of inter-site shared C-trees use | |
| Context | configure service vprn string mvpn intersite-shared admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.5.R1 | |
Platforms | All |
kat-type5-advertisement-withdraw boolean
| Synopsis | Enable KATs on source PEs for ng-MVPN deployments | |
| Context | configure service vprn string mvpn intersite-shared kat-type5-advertisement-withdraw boolean | |
| Tree | kat-type5-advertisement-withdraw | |
Description | When configured to true, this command specifies that the MVPN Type-5 “Source Active AD routes” are not removed even if all receivers are removed from the tree. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
persistent-type5-advertisement boolean
| Synopsis | Ensure Type-5 S-A routes are generated for MCAST source | |
| Context | configure service vprn string mvpn intersite-shared persistent-type5-advertisement boolean | |
| Tree | persistent-type5-advertisement | |
Description | When configured to true, this command removes the MVPN Type-5 “Source Active AD routes” even if receivers are present but the keepalive timer (KAT) has timed out because of no traffic. | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
mdt-type keyword
provider-tunnel
| Synopsis | Enter the provider-tunnel context | |
| Context | configure service vprn string mvpn provider-tunnel | |
| Tree | provider-tunnel | |
| Introduced | 19.5.R1 | |
Platforms | All |
inclusive
bier
admin-state keyword
| Synopsis | Administrative state of BIER | |
| Context | configure service vprn string mvpn provider-tunnel inclusive bier admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
sub-domain number
| Synopsis | Sub-domain used to attach the BIER provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel inclusive bier sub-domain number | |
| Tree | sub-domain | |
| Range | 0 to 255 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
bsr keyword
mldp
admin-state keyword
| Synopsis | Administrative state of MLDP LSP use for tunnels | |
| Context | configure service vprn string mvpn provider-tunnel inclusive mldp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
p2mp-sr
admin-state keyword
| Synopsis | Administrative state for P2MP SR | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.5.R1 | |
Platforms | All |
bfd-leaf boolean
| Synopsis | Enable unidirectional multipoint BFD on the leaf PE | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr bfd-leaf boolean | |
| Tree | bfd-leaf | |
Description | When configured to true, this command enables unidirectional multipoint BFD sessions on a receiver (leaf) PE node for upstream fast failure detection over P2MP SR tree LSP. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | All |
bfd-root
multiplier number
| Synopsis | Multiplier for the transmit interval of the BFD session | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr bfd-root multiplier number | |
| Tree | multiplier | |
Description | This command configures the multiplier for the transmit interval. The interval and the multiplier are used to calculate the detection time, which is the period of time without receiving BFD packets after which the session failure is determined. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | Transmit interval of the BFD session | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr bfd-root transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit interval. The interval and the multiplier are used to calculate the detection time, which is the period of time without receiving BFD packets after which the session failure is determined. | |
| Range | 10 to 100000 | |
Notes | This element is mandatory. | |
| Introduced | 21.10.R1 | |
Platforms | All |
p2mp-policy boolean
| Synopsis | Use P2MP policy for inclusive MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr p2mp-policy boolean | |
| Tree | p2mp-policy | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
static-policy reference
| Synopsis | Static policy for inclusive MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel inclusive p2mp-sr static-policy reference | |
| Tree | static-policy | |
Reference | configure router string p2mp-sr-tree p2mp-policy string | |
| Introduced | 21.5.R1 | |
Platforms | All |
pim
admin-state keyword
| Synopsis | Administrative state of PIM use for provider tunnels | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 19.5.R1 | |
Platforms | All |
group-address string
| Synopsis | Multicast group address | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim group-address string | |
| Tree | group-address | |
Notes | This element is mandatory. | |
| Introduced | 19.5.R1 | |
Platforms | All |
hello-interval number
| Synopsis | Frequency at which PIM Hello messages are transmitted | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim hello-interval number | |
| Tree | hello-interval | |
| Range | 0 to 255 | |
| Default | 30 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
hello-multiplier number
| Synopsis | Multiplier to determine the holdtime for a PIM neighbor | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim hello-multiplier number | |
| Tree | hello-multiplier | |
| Range | 20 to 100 | |
| Default | 35 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
improved-assert boolean
| Synopsis | Enable the improved assert procedure | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim improved-assert boolean | |
| Tree | improved-assert | |
| Default | true | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
mode keyword
three-way-hello boolean
| Synopsis | Enable PIM three-way hello | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim three-way-hello boolean | |
| Tree | three-way-hello | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
tracking-support boolean
| Synopsis | Enable the T bit in the LAN Prune Delay option | |
| Context | configure service vprn string mvpn provider-tunnel inclusive pim tracking-support boolean | |
| Tree | tracking-support | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
rsvp
admin-state keyword
| Synopsis | Administrative state of RSVP use for provider tunnels | |
| Context | configure service vprn string mvpn provider-tunnel inclusive rsvp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
bfd-leaf boolean
bfd-root
multiplier number
| Synopsis | Enable unidirectional multi-point BFD on a sender | |
| Context | configure service vprn string mvpn provider-tunnel inclusive rsvp bfd-root multiplier number | |
| Tree | multiplier | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | Transmit interval for the BFD session | |
| Context | configure service vprn string mvpn provider-tunnel inclusive rsvp bfd-root transmit-interval number | |
| Tree | transmit-interval | |
| Range | 10 to 100000 | |
Notes | This element is mandatory. | |
| Introduced | 19.5.R1 | |
Platforms | All |
lsp-template reference
| Synopsis | P2MP LSP created as the provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel inclusive rsvp lsp-template reference | |
| Tree | lsp-template | |
Reference | configure router string mpls lsp-template string | |
| Introduced | 19.5.R1 | |
Platforms | All |
umh-rate-monitoring
| Synopsis | Enter the umh-rate-monitoring context | |
| Context | configure service vprn string mvpn provider-tunnel inclusive umh-rate-monitoring | |
| Tree | umh-rate-monitoring | |
| Introduced | 21.5.R1 | |
Platforms | All |
revertive-timer number
| Synopsis | Time until switch to primary PMSI after recovering rate | |
| Context | configure service vprn string mvpn provider-tunnel inclusive umh-rate-monitoring revertive-timer number | |
| Tree | revertive-timer | |
| Range | 0 to 3600 | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
traffic-rate-delta number
| Synopsis | Rate delta between PMSIs under which traffic switches | |
| Context | configure service vprn string mvpn provider-tunnel inclusive umh-rate-monitoring traffic-rate-delta number | |
| Tree | traffic-rate-delta | |
| Range | 0 to 4294967294 | |
| Introduced | 21.5.R1 | |
Platforms | All |
wildcard-spmsi boolean
| Synopsis | Enable RFC 6625 S-PMSI functionality for NG-MVPN | |
| Context | configure service vprn string mvpn provider-tunnel inclusive wildcard-spmsi boolean | |
| Tree | wildcard-spmsi | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
selective
asm-mdt boolean
auto-discovery boolean
| Synopsis | Enable C-trees to P-tunnel binding auto-discovery | |
| Context | configure service vprn string mvpn provider-tunnel selective auto-discovery boolean | |
| Tree | auto-discovery | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
bier
admin-state keyword
| Synopsis | Administrative state of BIER | |
| Context | configure service vprn string mvpn provider-tunnel selective bier admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
sub-domain number
| Synopsis | Sub-domain used to attach the BIER provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective bier sub-domain number | |
| Tree | sub-domain | |
| Range | 0 to 255 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
data-delay-interval number
| Synopsis | Interval a PE switches from inclusive to selective | |
| Context | configure service vprn string mvpn provider-tunnel selective data-delay-interval number | |
| Tree | data-delay-interval | |
| Range | 3 to 180 | |
| Default | 3 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
data-threshold
| Synopsis | Enter the data-threshold context | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold | |
| Tree | data-threshold | |
| Introduced | 19.5.R1 | |
Platforms | All |
group-prefix [ip-group-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the group-prefix list instance | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
| Introduced | 19.5.R1 | |
Platforms | All |
[ip-group-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IPv4 or IPv6 multicast group address and prefix | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
pe-threshold-add number
| Synopsis | PE add threshold | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) pe-threshold-add number | |
| Tree | pe-threshold-add | |
| Range | 1 to 65535 | |
| Default | 65535 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
pe-threshold-delete number
| Synopsis | PE delete threshold | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) pe-threshold-delete number | |
| Tree | pe-threshold-delete | |
| Range | 2 to 65535 | |
| Default | 65535 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
threshold number
| Synopsis | S-PMSI threshold | |
| Context | configure service vprn string mvpn provider-tunnel selective data-threshold group-prefix (ipv4-prefix | ipv6-prefix) threshold number | |
| Tree | threshold | |
| Range | 0 to 4294967294 | |
| Units | kilobps | |
|
Notes | This element is mandatory. | |
| Introduced | 19.5.R1 | |
Platforms | All |
join-tlv-packing boolean
| Synopsis | Enable packing of MDT join TLVs into a single PDU | |
| Context | configure service vprn string mvpn provider-tunnel selective join-tlv-packing boolean | |
| Tree | join-tlv-packing | |
| Default | true | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
mldp
admin-state keyword
| Synopsis | Administrative state of MLDP LSP use for tunnels | |
| Context | configure service vprn string mvpn provider-tunnel selective mldp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
maximum-p2mp-spmsi number
| Synopsis | Maximum number of RSVP P2MP or LDP P2MP S-PMSI tunnels | |
| Context | configure service vprn string mvpn provider-tunnel selective mldp maximum-p2mp-spmsi number | |
| Tree | maximum-p2mp-spmsi | |
| Range | 1 to 4000 | |
| Default | 10 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
multistream-spmsi [multistream-id] number
| Synopsis | Enter the multistream-spmsi list instance | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number | |
| Tree | multistream-spmsi | |
| Introduced | 19.5.R1 | |
Platforms | All |
[multistream-id] number
| Synopsis | Multistream spmsi id | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number | |
| Tree | multistream-spmsi | |
| Range | 1 to 1024 | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of multi-stream S-PMSI | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
group-prefix [ip-group-prefix] (ipv4-prefix | ipv6-prefix) source-prefix (ipv4-prefix | ipv6-prefix)
| Synopsis | Add a list entry for group-prefix | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number group-prefix (ipv4-prefix | ipv6-prefix) source-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
| Introduced | 19.5.R1 | |
Platforms | All |
[ip-group-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IPv4 or IPv6 multicast group address and prefix | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number group-prefix (ipv4-prefix | ipv6-prefix) source-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
source-prefix (ipv4-prefix | ipv6-prefix)
| Synopsis | IPv4 or IPv6 unicast source address and prefix | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number group-prefix (ipv4-prefix | ipv6-prefix) source-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
lsp-template reference
| Synopsis | RSVP-TE LSP template for S-PMSI | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number lsp-template reference | |
| Tree | lsp-template | |
Reference | configure router string mpls lsp-template string | |
Notes | The following elements are part of a choice: lsp-template, p2mp-sr, or pim. | |
| Introduced | 19.5.R1 | |
Platforms | All |
p2mp-sr
| Synopsis | Enter the p2mp-sr context | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number p2mp-sr | |
| Tree | p2mp-sr | |
Notes | The following elements are part of a choice: lsp-template, p2mp-sr, or pim. | |
| Introduced | 21.5.R1 | |
Platforms | All |
p2mp-policy boolean
| Synopsis | Use P2MP policy for selective MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number p2mp-sr p2mp-policy boolean | |
| Tree | p2mp-policy | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
static-policy reference
| Synopsis | P2MP static policy for inclusive MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number p2mp-sr static-policy reference | |
| Tree | static-policy | |
Reference | configure router string p2mp-sr-tree p2mp-policy string | |
| Introduced | 21.5.R1 | |
Platforms | All |
pim
| Synopsis | Enable the pim context | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number pim | |
| Tree | pim | |
Notes | The following elements are part of a choice: lsp-template, p2mp-sr, or pim. | |
| Introduced | 19.5.R1 | |
Platforms | All |
group-address string
| Synopsis | Group address of the data MDT | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number pim group-address string | |
| Tree | group-address | |
| Introduced | 19.5.R1 | |
Platforms | All |
mode keyword
| Synopsis | PIM mode for the selective provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective multistream-spmsi number pim mode keyword | |
| Tree | mode | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms |
All |
p2mp-sr
admin-state keyword
| Synopsis | Administrative state of P2MP SR | |
| Context | configure service vprn string mvpn provider-tunnel selective p2mp-sr admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.5.R1 | |
Platforms | All |
p2mp-policy boolean
| Synopsis | Use P2MP policy for selective MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective p2mp-sr p2mp-policy boolean | |
| Tree | p2mp-policy | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
static-policy reference
| Synopsis | Static policy for selective MVPN provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective p2mp-sr static-policy reference | |
| Tree | static-policy | |
Reference | configure router string p2mp-sr-tree p2mp-policy string | |
| Introduced | 21.5.R1 | |
Platforms | All |
pim
group-prefix string
| Synopsis | Multicast group address and netmask length | |
| Context | configure service vprn string mvpn provider-tunnel selective pim group-prefix string | |
| Tree | group-prefix | |
Notes | This element is mandatory. | |
| Introduced | 19.5.R1 | |
Platforms | All |
mode keyword
rsvp
admin-state keyword
| Synopsis | Administrative state of RSVP use for provider tunnels | |
| Context | configure service vprn string mvpn provider-tunnel selective rsvp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 19.5.R1 | |
Platforms | All |
lsp-template reference
| Synopsis | P2MP LSP created as the selective provider tunnel | |
| Context | configure service vprn string mvpn provider-tunnel selective rsvp lsp-template reference | |
| Tree | lsp-template | |
Reference | configure router string mpls lsp-template string | |
| Introduced | 19.5.R1 | |
Platforms | All |
maximum-p2mp-spmsi number
| Synopsis | Maximum number of RSVP P2MP or LDP P2MP S-PMSI tunnels | |
| Context | configure service vprn string mvpn provider-tunnel selective rsvp maximum-p2mp-spmsi number | |
| Tree | maximum-p2mp-spmsi | |
| Range | 1 to 4000 | |
| Default | 10 | |
| Introduced | 19.5.R1 | |
Platforms |
All |
umh-rate-monitoring
| Synopsis | Enter the umh-rate-monitoring context | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring | |
| Tree | umh-rate-monitoring | |
| Introduced | 21.5.R1 | |
Platforms | All |
group [group-ip-address] (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the group list instance | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix) | |
| Tree | group | |
| Introduced | 21.5.R1 | |
Platforms | All |
[group-ip-address] (ipv4-prefix | ipv6-prefix)
| Synopsis | Group IP address | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix) | |
| Tree | group | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | All |
source (ipv4-prefix | ipv6-prefix)
| Synopsis | Source IP address | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix) | |
| Tree | group | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | All |
revertive-timer number
| Synopsis | Time until switch to primary PMSI after recovering rate | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix) revertive-timer number | |
| Tree | revertive-timer | |
| Range | 0 to 3600 | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
traffic-rate-delta number
| Synopsis | Rate delta between PMSIs under which traffic switches | |
| Context | configure service vprn string mvpn provider-tunnel selective umh-rate-monitoring group (ipv4-prefix | ipv6-prefix) source (ipv4-prefix | ipv6-prefix) traffic-rate-delta number | |
| Tree | traffic-rate-delta | |
| Range | 0 to 4294967294 | |
| Introduced | 21.5.R1 | |
Platforms | All |
redundant-source-list
| Synopsis | Enter the redundant-source-list context | |
| Context | configure service vprn string mvpn redundant-source-list | |
| Tree | redundant-source-list | |
| Introduced | 19.5.R1 | |
Platforms | All |
source-prefix [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Add a list entry for source-prefix | |
| Context | configure service vprn string mvpn redundant-source-list source-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | source-prefix | |
| Max. Instances | 16 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Unicast address prefix and mask | |
| Context | configure service vprn string mvpn redundant-source-list source-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | source-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
rpf-select
| Synopsis | Enter the rpf-select context | |
| Context | configure service vprn string mvpn rpf-select | |
| Tree | rpf-select | |
| Introduced | 19.5.R1 | |
Platforms | All |
core-mvpn [core-mvpn-service-name] reference
[core-mvpn-service-name] reference
group-prefix [ip-group-prefix] string
| Synopsis | Enter the group-prefix list instance | |
| Context | configure service vprn string mvpn rpf-select core-mvpn reference group-prefix string | |
| Tree | group-prefix | |
| Min. Instances | 1 | |
| Introduced | 19.5.R1 | |
|
Platforms | All |
[ip-group-prefix] string
| Synopsis | IPv4 multicast address prefix and mask | |
| Context | configure service vprn string mvpn rpf-select core-mvpn reference group-prefix string | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 19.5.R1 | |
Platforms | All |
starg boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Starg flag. | |
| Context | configure service vprn string mvpn rpf-select core-mvpn reference group-prefix string starg boolean | |
| Tree | starg | |
| Default | false | |
| Introduced | 19.5.R1 | |
|
Platforms | All | |
umh-pe-backup
| Synopsis | Enter the umh-pe-backup context | |
| Context | configure service vprn string mvpn umh-pe-backup | |
| Tree | umh-pe-backup | |
| Introduced | 19.5.R1 | |
Platforms | All |
umh-pe [ip-address] string
[ip-address] string
standby string
umh-selection keyword
| Synopsis | UMH selection mechanism | |
| Context | configure service vprn string mvpn umh-selection keyword | |
| Tree | umh-selection | |
| Options | ||
| Default | highest-ip | |
| Introduced | 19.5.R1 | |
Platforms |
All |
vrf-export
| Synopsis | Enter the vrf-export context | |
| Context | configure service vprn string mvpn vrf-export | |
| Tree | vrf-export | |
| Introduced | 19.5.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Route policy name | |
| Context | configure service vprn string mvpn vrf-export policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies the route policy name. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed between double quotes. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | The following elements are part of a choice: policy or unicast. This element is ordered by the user. | |
| Introduced | 19.5.R1 | |
Platforms |
All |
unicast boolean
vrf-import
| Synopsis | Enter the vrf-import context | |
| Context | configure service vprn string mvpn vrf-import | |
| Tree | vrf-import | |
| Introduced | 19.5.R1 | |
Platforms | All |
policy (policy-expr-string | string)
| Synopsis | Route policy name | |
| Context | configure service vprn string mvpn vrf-import policy (policy-expr-string | string) | |
| Tree | policy | |
Description | This command specifies the route policy name. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed between double quotes. | |
| String Length | 1 to 255 | |
| Max. Instances | 15 | |
| Min. Instances | 1 | |
|
Notes | The following elements are part of a choice: policy or unicast. This element is ordered by the user. | |
| Introduced | 19.5.R1 | |
Platforms |
All |
unicast boolean
vrf-target
| Synopsis | Enter the vrf-target context | |
| Context | configure service vprn string mvpn vrf-target | |
| Tree | vrf-target | |
| Introduced | 19.5.R1 | |
Platforms | All |
community string
export
community string
unicast boolean
import
community string
unicast boolean
unicast boolean
nat
inside
l2-aware
force-unique-ip-addresses boolean
| Synopsis | Enforce unique IPv4 addresses for L2-aware subscribers | |
| Context | configure service vprn string nat inside l2-aware force-unique-ip-addresses boolean | |
| Tree | force-unique-ip-addresses | |
Description | When configured to true, the system enforces the uniqueness of IPv4 addresses of L2-aware subscribers in an inside routing context. This functionality is required if multicast sourced from the inside routing context is enabled for L2-aware subscribers. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
subscribers [prefix] string
| Synopsis | Add a list entry for subscribers | |
| Context | configure service vprn string nat inside l2-aware subscribers string | |
| Tree | subscribers | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[prefix] string
| Synopsis | Layer-2 Aware NAT subscriber prefix | |
| Context | configure service vprn string nat inside l2-aware subscribers string | |
| Tree | subscribers | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
large-scale
| Synopsis | Enter the large-scale context | |
| Context | configure service vprn string nat inside large-scale | |
| Tree | large-scale | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dnat-only
source-prefix-list reference
| Synopsis | NAT prefix list that contains source IP addresses | |
| Context | configure service vprn string nat inside large-scale dnat-only source-prefix-list reference | |
| Tree | source-prefix-list | |
Reference | configure service nat prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dual-stack-lite
| Synopsis | Enter the dual-stack-lite context | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite | |
| Tree | dual-stack-lite | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Dual Stack Lite | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
deterministic
| Synopsis | Enter the deterministic context | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic | |
| Tree | deterministic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix-map [source-prefix] string nat-policy reference
| Synopsis | Enter the prefix-map list instance | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[source-prefix] string
| Synopsis | List containing source IP addresses on the private side | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
| Synopsis | NAT policy | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
Reference | configure service nat nat-policy string | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the prefix | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
map [from] string to string
| Synopsis | Enter the map list instance | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[from] string
| Synopsis | Beginning of the range for IPv6 addresses | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
to string
| Synopsis | End of the range for IPv6 addresses | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
first-outside-address string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Outside IP address mapped to inside IP address range | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite deterministic prefix-map string nat-policy reference map string to string first-outside-address string | |
| Tree | first-outside-address | |
Notes | This element is mandatory. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
endpoint [address] string
| Synopsis | Enter the endpoint list instance | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string | |
| Tree | endpoint | |
| Max. Instances | 128 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[address] string
| Synopsis | Dual Stack Lite IPv6 address | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string | |
| Tree | endpoint | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-fragmentation keyword
| Synopsis | Fragmentation control of the AFTR originated downstream IPv6 traffic | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string ip-fragmentation keyword | |
| Tree | ip-fragmentation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
min-first-fragment-size-rx number
| Synopsis | Minimum MTU size for upstream packets | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string min-first-fragment-size-rx number | |
| Tree | min-first-fragment-size-rx | |
Description | This command configures the minimum MTU size for the first fragment in the upstream direction. This command can be used to enable processing of first IPv6 fragments smaller than 1280 bytes. RFC 8200 recommends the minimum MTU in IPv6 be 1280 bytes which allows fragmentation only for packets that are larger than 1280 bytes. If a first fragment is smaller than 1280 bytes, DS-lite implementation in the SR OS, by default, drops the first fragment. | |
| Range | 512 to 1280 | |
| Default | 1280 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
reassembly boolean
| Synopsis | Reassembly of IPv6 payload datagrams | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string reassembly boolean | |
| Tree | reassembly | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tunnel-mtu number
| Synopsis | DS-Lite tunnel MTU for this address | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite endpoint string tunnel-mtu number | |
| Tree | tunnel-mtu | |
Description | This command configures the Dual Stack Lite (DS-Lite) tunnel MTU for this address. | |
| Range | 464 to 9212 | |
| Default | 1500 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max-subscriber-limit number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Largest value for all subscriber limits in each deterministic pool | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite max-subscriber-limit number | |
| Tree | max-subscriber-limit | |
| Range | 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
subscriber-prefix-length number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | IPv6 prefix length of the Dual Stack Lite subscribers | |
| Context | configure service vprn string nat inside large-scale dual-stack-lite subscriber-prefix-length number | |
| Tree | subscriber-prefix-length | |
| Range | 32 to 64 | 128 | |
| Default | 128 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
filters
downstream
| Synopsis | Enter the downstream context | |
| Context | configure service vprn string nat inside large-scale filters downstream | |
| Tree | downstream | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4 reference
nat-policy reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | NAT policy for LSN | |
| Context | configure service vprn string nat inside large-scale nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
nat44
destination-prefix [ip-prefix-length] string
| Synopsis | Enter the destination-prefix list instance | |
| Context | configure service vprn string nat inside large-scale nat44 destination-prefix string | |
| Tree | destination-prefix | |
| Max. Instances | 6144 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[ip-prefix-length] string
| Synopsis | IP prefix for the destination address | |
| Context | configure service vprn string nat inside large-scale nat44 destination-prefix string | |
| Tree | destination-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | NAT policy | |
| Context | configure service vprn string nat inside large-scale nat44 destination-prefix string nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
deterministic
| Synopsis | Enter the deterministic context | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic | |
| Tree | deterministic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
prefix-map [source-prefix] string nat-policy reference
| Synopsis | Enter the prefix-map list instance | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[source-prefix] string
| Synopsis | Traffic sent from sources within this prefix will be NATed | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
| Synopsis | NAT policy | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference | |
| Tree | prefix-map | |
Reference | configure service nat nat-policy string | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the prefix | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
map [from] string to string
| Synopsis | Enter the map list instance | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[from] string
| Synopsis | Beginning of the range for IPv4 addresses | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
to string
| Synopsis | End of the range for IPv4 addresses | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference map string to string | |
| Tree | map | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
first-outside-address string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Outside IP address mapped to inside IP address range | |
| Context | configure service vprn string nat inside large-scale nat44 deterministic prefix-map string nat-policy reference map string to string first-outside-address string | |
| Tree | first-outside-address | |
Notes | This element is mandatory. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-subscriber-limit number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Largest value for all subscriber limits in each deterministic pool | |
| Context | configure service vprn string nat inside large-scale nat44 max-subscriber-limit number | |
| Tree | max-subscriber-limit | |
| Range | 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
nat-import reference
| Synopsis | Import BGP-VPN routes in NAT inside routing context | |
| Context | configure service vprn string nat inside large-scale nat44 nat-import reference | |
| Tree | nat-import | |
Description | This command references an import policy to determine the routes that should be installed in the routing table as NAT routes, which are used to steer traffic to NAT. A dynamic route obtained by BGP-VPN can be imported into an inside (private side) routing context in NAT environment. This route is associated with a NAT policy that maps traffic destined into a NAT pool and outside routing context. If the NAT policy is not explicitly configured in the import route-policy, the imported NAT route is, by default, associated with the default NAT policy defined in the NAT inside routing context. All BGP-VPN routes that are destined to be imported into NAT inside routing context must be configured with action-type accept in the route policy. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
source-prefix [ip-prefix-length] string
| Synopsis | Enter the source-prefix list instance | |
| Context | configure service vprn string nat inside large-scale nat44 source-prefix string | |
| Tree | source-prefix | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[ip-prefix-length] string
| Synopsis | IPv4 prefix length | |
| Context | configure service vprn string nat inside large-scale nat44 source-prefix string | |
| Tree | source-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | AT policy associated with the source prefix | |
| Context | configure service vprn string nat inside large-scale nat44 source-prefix string nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
Notes | This element is mandatory. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
nat64
admin-state keyword
| Synopsis | Administrative state of NAT64 | |
| Context | configure service vprn string nat inside large-scale nat64 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
drop-zero-ipv4-checksum boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Drop UDP datagrams with zero IPv4 checksum | |
| Context | configure service vprn string nat inside large-scale nat64 drop-zero-ipv4-checksum boolean | |
| Tree | drop-zero-ipv4-checksum | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
insert-ipv6-fragment-header boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Include IPv6 fragment header to indicate that the sender allows fragmentation | |
| Context | configure service vprn string nat inside large-scale nat64 insert-ipv6-fragment-header boolean | |
| Tree | insert-ipv6-fragment-header | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ip-fragmentation keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Control fragmentation of originated downstream IPv6 traffic | |
| Context | configure service vprn string nat inside large-scale nat64 ip-fragmentation keyword | |
| Tree | ip-fragmentation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ipv6-mtu number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Size of the IPv6 downstream packet in NAT64 | |
| Context | configure service vprn string nat inside large-scale nat64 ipv6-mtu number | |
| Tree | ipv6-mtu | |
| Range | 1280 to 9212 | |
| Default | 1520 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | IPv6 prefix to derive the IPv6 address from the IPv4 address | |
| Context | configure service vprn string nat inside large-scale nat64 prefix string | |
| Tree | prefix | |
| Default | 64:ff9b::/96 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
subscriber-prefix-length number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | IPv6 prefix length for the NAT64 subscribers | |
| Context | configure service vprn string nat inside large-scale nat64 subscriber-prefix-length number | |
| Tree | subscriber-prefix-length | |
| Range | 32 to 64 | 128 | |
| Default | 128 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
tos
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the tos context | |
| Context | configure service vprn string nat inside large-scale nat64 tos | |
| Tree | tos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
downstream
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the downstream context | |
| Context | configure service vprn string nat inside large-scale nat64 tos downstream | |
| Tree | downstream | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
use-ipv4 boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Copy TOS/DSCP bits from the incoming IPv4 frame to the outgoing IPv6 frame | |
| Context | configure service vprn string nat inside large-scale nat64 tos downstream use-ipv4 boolean | |
| Tree | use-ipv4 | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
upstream
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the upstream context | |
| Context | configure service vprn string nat inside large-scale nat64 tos upstream | |
| Tree | upstream | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
set-tos (keyword | number)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | TOS/DSCP bits in IPv4 frame in the upstream direction | |
| Context | configure service vprn string nat inside large-scale nat64 tos upstream set-tos (keyword | number) | |
| Tree | set-tos | |
| Range | 0 to 255 | |
| Options | ||
| Default | use-ipv6 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
redundancy
| Synopsis | Enter the redundancy context | |
| Context | configure service vprn string nat inside large-scale redundancy | |
| Tree | redundancy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
peer string
| Synopsis | IP address of the NAT redundancy peer for this virtual router instance | |
| Context | configure service vprn string nat inside large-scale redundancy peer string | |
| Tree | peer | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
peer6 string
| Synopsis | IPv6 address of the NAT redundancy peer for this virtual router instance | |
| Context | configure service vprn string nat inside large-scale redundancy peer6 string | |
| Tree | peer6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
steering-route string
| Synopsis | IP address and prefix length of the steering route | |
| Context | configure service vprn string nat inside large-scale redundancy steering-route string | |
| Tree | steering-route | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
subscriber-identification
| Synopsis | Enter the subscriber-identification context | |
| Context | configure service vprn string nat inside large-scale subscriber-identification | |
| Tree | subscriber-identification | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of subscriber identification | |
| Context | configure service vprn string nat inside large-scale subscriber-identification admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
attribute
| Synopsis | Enter the attribute context | |
| Context | configure service vprn string nat inside large-scale subscriber-identification attribute | |
| Tree | attribute | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | RADIUS attribute used as subscriber identifier | |
| Context | configure service vprn string nat inside large-scale subscriber-identification attribute type keyword | |
| Tree | type | |
| Options | ||
| Default | alc-sub-string | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
vendor keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | The RADIUS Vendor | |
| Context | configure service vprn string nat inside large-scale subscriber-identification attribute vendor keyword | |
| Tree | vendor | |
| Options | ||
| Default | nokia | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string nat inside large-scale subscriber-identification description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
drop-unidentified-traffic boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Drop traffic from unidentified flows | |
| Context | configure service vprn string nat inside large-scale subscriber-identification drop-unidentified-traffic boolean | |
| Tree | drop-unidentified-traffic | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
radius-proxy-server
| Synopsis | Enable the radius-proxy-server context | |
| Context | configure service vprn string nat inside large-scale subscriber-identification radius-proxy-server | |
| Tree | radius-proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Router instance | |
| Context | configure service vprn string nat inside large-scale subscriber-identification radius-proxy-server router-instance string | |
| Tree | router-instance | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Server name | |
| Context | configure service vprn string nat inside large-scale subscriber-identification radius-proxy-server server string | |
| Tree | server | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
traffic-identification
| Synopsis | Enter the traffic-identification context | |
| Context | configure service vprn string nat inside large-scale traffic-identification | |
| Tree | traffic-identification | |
Description | Commands in this context configure traffic idenification for NAT processing | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
source-prefix-only boolean
| Synopsis | Allow traffic associated with source prefixes only | |
| Context | configure service vprn string nat inside large-scale traffic-identification source-prefix-only boolean | |
| Tree | source-prefix-only | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
map
map-domain [domain-name] reference
| Synopsis | Add a list entry for map-domain | |
| Context | configure service vprn string nat map map-domain reference | |
| Tree | map-domain | |
| Introduced | 16.0.R1 | |
Platforms | VSR |
[domain-name] reference
| Synopsis | MAP domain template name | |
| Context | configure service vprn string nat map map-domain reference | |
| Tree | map-domain | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | VSR |
outside
dnat-only
route-limit number
| Synopsis | Limit for internal routes for downstream traffic | |
| Context | configure service vprn string nat outside dnat-only route-limit number | |
| Tree | route-limit | |
| Range | 1 to 131072 | |
| Default | 32768 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
filters
downstream
| Synopsis | Enter the downstream context | |
| Context | configure service vprn string nat outside filters downstream | |
| Tree | downstream | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv4 reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service vprn string nat outside filters downstream ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
upstream
ipv4 reference
ipv6 reference
mtu number
pool [name] string
[name] string
address-pooling keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Outside IP address allocation mode for a NAT subscriber | |
| Context | configure service vprn string nat outside pool string address-pooling keyword | |
| Tree | address-pooling | |
Description | This command configures address pooling which defines a relationship between the NAT subscriber and its outside IP address(es). The behavior in NAT, as defined in RFC 7857, strongly recommends that the NAT subscribers be mapped to a single outside IP address. If this outside IP address runs out of ports, no new ports for the subscriber are allocated. This behavior is called paired address pooling. The alternative behavior is arbitrary address pooling, where a NAT subscriber is mapped to multiple IP addresses when the current outside IP address runs out of ports. This way, the subscriber becomes associated with multiple outside IP addresses. While this results in better resource utilization in NAT, it may negatively affect the behavior of some applications. | |
| Options | ||
| Default | paired | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
address-range [start] string end string
| Synopsis | Enter the address-range list instance | |
| Context | configure service vprn string nat outside pool string address-range string end string | |
| Tree | address-range | |
| Max. Instances | 4096 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[start] string
| Synopsis | Lower bound of the NAT address range | |
| Context | configure service vprn string nat outside pool string address-range string end string | |
| Tree | address-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
end string
| Synopsis | Upper bound of the NAT address range | |
| Context | configure service vprn string nat outside pool string address-range string end string | |
| Tree | address-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string nat outside pool string address-range string end string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
drain boolean
admin-state keyword
| Synopsis | Administrative state of the outside routing NAT pool | |
| Context | configure service vprn string nat outside pool string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
applications
| Synopsis | Enter the applications context | |
| Context | configure service vprn string nat outside pool string applications | |
| Tree | applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
agnostic boolean
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT pool to create in the outside routing context | |
| Context | configure service vprn string nat outside pool string applications agnostic boolean | |
| Tree | agnostic | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string nat outside pool string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
icmp-echo-reply boolean
| Synopsis | Allow NAT pool IP addresses to respond to ICMP PINGs | |
| Context | configure service vprn string nat outside pool string icmp-echo-reply boolean | |
| Tree | icmp-echo-reply | |
Description | This command allows IP addresses in the NAT pool to respond to ICMP Echo requests (PINGs). The configuration can be toggled while the pool is in use. In L2-aware NAT when port-block-extensions is disabled, the reply from an outside IP address is generated only when this IP address has at least one host (binding) behind it. In L2-aware NAT when port-block-extensions is enabled, the reply from an outside IP address is generated regardless if a binding is present. In LSN, the reply from an outside IP address is generated regardless if a binding is present. | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-aware
default-host
| Synopsis | Enable the default-host context | |
| Context | configure service vprn string nat outside pool string l2-aware default-host | |
| Tree | default-host | |
Description | Commands in this context configure the default DMZ host options. A default DMZ host is a node on the inside to which all unknown traffic is redirected by changing the destination IPv4 address in the traffic header. During this operation, the checksums in the Layer 3 and Layer 4 header (UDP and TCP) are recalculated. Unknown traffic in NAT represent all unmatched traffic arriving from the outside (where there is no pinhole or a matching flow record created by traffic initiated from the inside). The purpose of the default DMZ host is to capture and analyze the unknown traffic as part of threat analysis. The rate of redirected unknown traffic can be restricted by configuration. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inside-router-instance string
| Synopsis | Router instance of the DMZ | |
| Context | configure service vprn string nat outside pool string l2-aware default-host inside-router-instance string | |
| Tree | inside-router-instance | |
Description | This command configures the router instance on the inside where the default DMZ host resides. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IP address of the default DMZ host | |
| Context | configure service vprn string nat outside pool string l2-aware default-host ip-address string | |
| Tree | ip-address | |
Description | This command configures the IP address of the default DMZ host. Redirection to the default DMZ host is achieved by replacing the destination IP address in the traffic header in the unknown traffic initiated from the outside with the one of the default DMZ host. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rate-limit number
| Synopsis | Rate limit for unknown traffic sent to default DMZ host | |
| Context | configure service vprn string nat outside pool string l2-aware default-host rate-limit number | |
| Tree | rate-limit | |
Description | This command configures the rate limit of the unknown traffic sent to the default DMZ host. Unknown traffic sent to the default DMZ host is rate limited by a configurable value expressed in mbps. The rate limit is configurable per NAT pool per ISA, vISA, or ESA-VM. | |
| Range | 1 to 10000 | |
| Units | megabps | |
| Default | 10 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
external-assignment boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | External IP address for Layer-2-aware | |
| Context | configure service vprn string nat outside pool string l2-aware external-assignment boolean | |
| Tree | external-assignment | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
port-block-extension
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the port-block-extension context | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension | |
| Tree | port-block-extension | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ports number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Number of ports per dynamic port-block | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension ports number | |
| Tree | ports | |
Description | For Carrier Grade NAT (CGN), this command represents the size of all port blocks for NAT subscribes in the NAT pool. For L2-Aware NAT, this command represents only the size of the initial port block of a subscriber in the L2-aware NAT pool. Additional port-blocks (extended port blocks) for the L2-Aware subscriber must be explicitly enabled under the l2-aware port-block-extension hierarchy in the NAT pool. This command does not affect the size of extended port-blocks. | |
| Range | 10 to 5000 | |
Notes | This element is mandatory. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
subscriber
| Synopsis | Enter the subscriber context | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension subscriber | |
| Tree | subscriber | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension subscriber watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension subscriber watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension subscriber watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
subscriber-limit number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Number of L2-Aware NAT subscribers per outside address | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension subscriber-limit number | |
| Tree | subscriber-limit | |
Description | When port-block extensions for the L2-Aware subscribers are enabled, the port space for an outside IP address is divided into the following:
The number of L2-Aware NAT subscribers per an outside IP address multiplied by the size of the initial port-block size determines the size of the port range reserved for initial port-blocks of each subscriber. The lower boundary of the extended port range is determined by adding the upper boundary of the configured port forwarding range and the size of the port range allocated for initial port blocks. | |
| Range | 2 to 2000 | |
Notes | This element is mandatory. | |
| Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension watermarks | |
| Tree | watermarks | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service vprn string nat outside pool string l2-aware port-block-extension watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
large-scale
| Synopsis | Enter the large-scale context | |
| Context | configure service vprn string nat outside pool string large-scale | |
| Tree | large-scale | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-host
| Synopsis | Enable the default-host context | |
| Context | configure service vprn string nat outside pool string large-scale default-host | |
| Tree | default-host | |
Description | Commands in this context configure the default DMZ host options. A default DMZ host is a node on the inside to which all unknown traffic is redirected by changing the destination IPv4 address in the traffic header. During this operation, the checksums in the Layer 3 and Layer 4 header (UDP and TCP) are recalculated. Unknown traffic in NAT represent all unmatched traffic arriving from the outside (where there is no pinhole or a matching flow record created by traffic initiated from the inside). The purpose of the default DMZ host is to capture and analyze the unknown traffic as part of threat analysis. The rate of redirected unknown traffic can be restricted by configuration. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inside-router-instance string
| Synopsis | Router instance of the DMZ | |
| Context | configure service vprn string nat outside pool string large-scale default-host inside-router-instance string | |
| Tree | inside-router-instance | |
Description | This command configures the router instance on the inside where the default DMZ host resides. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IP address of the default DMZ host | |
| Context | configure service vprn string nat outside pool string large-scale default-host ip-address string | |
| Tree | ip-address | |
Description | This command configures the IP address of the default DMZ host. Redirection to the default DMZ host is achieved by replacing the destination IP address in the traffic header in the unknown traffic initiated from the outside with the one of the default DMZ host. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
rate-limit number
| Synopsis | Rate limit for unknown traffic sent to default DMZ host | |
| Context | configure service vprn string nat outside pool string large-scale default-host rate-limit number | |
| Tree | rate-limit | |
Description | This command configures the rate limit of the unknown traffic sent to the default DMZ host. Unknown traffic sent to the default DMZ host is rate limited by a configurable value expressed in mbps. The rate limit is configurable per NAT pool per ISA, vISA, or ESA-VM. | |
| Range | 1 to 10000 | |
| Units | megabps | |
| Default | 10 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
deterministic
| Synopsis | Enter the deterministic context | |
| Context | configure service vprn string nat outside pool string large-scale deterministic | |
| Tree | deterministic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-reservation number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Number of ports per deterministic port-block | |
| Context | configure service vprn string nat outside pool string large-scale deterministic port-reservation number | |
| Tree | port-reservation | |
| Range | 1 to 65536 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service vprn string nat outside pool string large-scale deterministic watermarks | |
| Tree | watermarks | |
Description | Commands in this context monitor extended (dynamic) port-block utilization per outside IP in a NAT pool in deterministic LSN. High and low thresholds are configured in percentages of total available extended port-blocks per outside IP in a pool. Both values represent extended port-block utilization or occupancy per outside IP in a pool. For the system to generate those events, the NAT event-id 2045 must be enabled through configuration in the log event-control. | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service vprn string nat outside pool string large-scale deterministic watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service vprn string nat outside pool string large-scale deterministic watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
redundancy
| Synopsis | Enter the redundancy context | |
| Context | configure service vprn string nat outside pool string large-scale redundancy | |
| Tree | redundancy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of NAT pool redundancy | |
| Context | configure service vprn string nat outside pool string large-scale redundancy admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
Notes |
The following elements are part of a choice: (admin-state, export-route, and monitor-route) or follow. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
export-route string
| Synopsis | Route to export to the peer | |
| Context | configure service vprn string nat outside pool string large-scale redundancy export-route string | |
| Tree | export-route | |
Notes | The following elements are part of a choice: (admin-state, export-route, and monitor-route) or follow. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
follow
| Synopsis | Enter the follow context | |
| Context | configure service vprn string nat outside pool string large-scale redundancy follow | |
| Tree | follow | |
Notes | The following elements are part of a choice: (admin-state, export-route, and monitor-route) or follow. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
| Synopsis | Name of the pool where activity is shared | |
| Context | configure service vprn string nat outside pool string large-scale redundancy follow name string | |
| Tree | name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Router instance where the lead pool resides | |
| Context | configure service vprn string nat outside pool string large-scale redundancy follow router-instance string | |
| Tree | router-instance | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
monitor-route string
| Synopsis | Monitor the peer route | |
| Context | configure service vprn string nat outside pool string large-scale redundancy monitor-route string | |
| Tree | monitor-route | |
Notes | The following elements are part of a choice: (admin-state, export-route, and monitor-route) or follow. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
subscriber-limit number
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Maximum number of subscribers per IP address | |
| Context | configure service vprn string nat outside pool string large-scale subscriber-limit number | |
| Tree | subscriber-limit | |
| Range | 1 to 65535 | 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
mode keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Mode of operation of this NAT address pool | |
| Context | configure service vprn string nat outside pool string mode keyword | |
| Tree | mode | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
nat-group reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Create a NAT group | |
| Context | configure service vprn string nat outside pool string nat-group reference | |
| Tree | nat-group | |
Reference | ||
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
port-forwarding
| Synopsis | Enter the port-forwarding context | |
| Context | configure service vprn string nat outside pool string port-forwarding | |
| Tree | port-forwarding | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dynamic-block-reservation boolean
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Reserve dynamic block for subscriber | |
| Context | configure service vprn string nat outside pool string port-forwarding dynamic-block-reservation boolean | |
| Tree | dynamic-block-reservation | |
Description | When configured to true, the system reserves dynamic port block when the first port forward for the subscriber is created. The dynamic port block allocation is logged only if the block is being used and mappings are created. Dynamic port block reservation due to the port forward creation but without any dynamic mapping, is not logged. The reserved port block is released only when the last mapping in the block expires and there are no port forwards associated with the subscriber. The de-allocation log (syslog or RADIUS) is generated when the dynamic port block is completely released. Dynamic port block reservations can be enabled only if the configured maximum number of subscribers per outside IP addresses are less than or equal to the maximum number of configured port blocks per outside IP address. When configured to false, dynamic port blocks are not reserved when the first port forward for the subscriber is created. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
range-end number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | End of the wildcard range for port forwards | |
| Context | configure service vprn string nat outside pool string port-forwarding range-end number | |
| Tree | range-end | |
Description | This command configures the upper boundary of the wildcard port range dedicated to port forwarding in a NAT pool, whereas the range-start command configures the lower boundary (the starting port) of the wildcard port range dedicated to port forwarding in a NAT pool. If unconfigured, the range-end implicit value is set to 1023, that represents the end of the well-known port range that is always enabled. Port forwards are supported only in pools in NAPT mode. Pools in 1:1 mode do not support port-forwards. | |
| Range | 0 | 1023 to 65535 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
range-start number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Start of the wildcard range for port forwards | |
| Context | configure service vprn string nat outside pool string port-forwarding range-start number | |
| Tree | range-start | |
Description | This command configures the lower boundary (the starting port) of the wildcard port range dedicated to port forwarding in a NAT pool, whereas the range-end command configures the upper boundary of the wildcard port range dedicated to port forwarding in a NAT pool. Port 0 is always excluded from the port forwarding range. Port forwards are supported only in pools in Network Address and Port Translation (NAPT) mode. Pools in 1:1 mode do not support configured port forwards. | |
| Range | 0 | 1 | 1025 to 65535 | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
port-reservation
| Synopsis | Enter the port-reservation context | |
| Context | configure service vprn string nat outside pool string port-reservation | |
| Tree | port-reservation | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port-blocks number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Port block size for NAT subscribers | |
| Context | configure service vprn string nat outside pool string port-reservation port-blocks number | |
| Tree | port-blocks | |
Description | In CGN, this command specifies the number of port-blocks per outside IP address in the NAT pool. The available ports per outside IP address (the end port minus the upper bound value of the static port-forwarding range) are divided into the number of port blocks specified in this command. This implicitly determines the size of each port block. For L2-aware NAT, this command can be configured only if the port block extensions (extended port blocks) are disabled. You must disable the l2-aware port-block-extension hierarchy in the NAT pool. | |
| Range | 0 to 64512 | |
Notes | The following elements are part of a choice: port-blocks or ports. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
ports number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
| Synopsis | Size of the port block for NAT subscribers | |
| Context | configure service vprn string nat outside pool string port-reservation ports number | |
| Tree | ports | |
Description | For carrier-grade NAT (CGN), this command specifies the size of port blocks for NAT subscribes in the NAT pool. For L2-aware NAT, this command specifies the size of the initial port-block of a subscriber in the pool. Additional port blocks (extended port blocks) for the L2-aware subscriber must be explicitly enabled under the l2-aware port-block-extension hierarchy in the NAT pool. This command does not affect the size of extended port blocks. | |
| Range | 1 to 64512 | |
Notes | The following elements are part of a choice: port-blocks or ports. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
type keyword
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT pool type | |
| Context | configure service vprn string nat outside pool string type keyword | |
| Tree | type | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
watermarks
| Synopsis | Enable the watermarks context | |
| Context | configure service vprn string nat outside pool string watermarks | |
| Tree | watermarks | |
Description | This command configures watermarks for NAT resources. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark percentage | |
| Context | configure service vprn string nat outside pool string watermarks high number | |
| Tree | high | |
Description | This command configures the high threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark percentage | |
| Context | configure service vprn string nat outside pool string watermarks low number | |
| Tree | low | |
Description | This command configures the low threshold value as a percentage of the total port-block space in a NAT pool. | |
| Range | 0 to 100 | |
| Units | percent | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element clears ISA state, such as flow state, for the new value to take effect. | ||
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Create a WLAN GW group for NAT | |
| Context | configure service vprn string nat outside pool string wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
Notes | The following elements are part of a mandatory choice: nat-group or wlan-gw-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
network
ingress
filter
ip reference
ipv6 reference
qos
fp-redirect-group reference
| Synopsis | The forwarding-plane queue group Policy for this VPRN | |
| Context | configure service vprn string network ingress qos fp-redirect-group reference | |
| Tree | fp-redirect-group | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
instance number
network-policy reference
| Synopsis | Network policy name associated with a VPRN | |
| Context | configure service vprn string network ingress qos network-policy reference | |
| Tree | network-policy | |
Reference | ||
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
urpf-check boolean
| Synopsis | Enable unicast RPF check of network ingress traffic | |
| Context | configure service vprn string network ingress urpf-check boolean | |
| Tree | urpf-check | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
network-interface [interface-name] string
| Synopsis | Enter the network-interface list instance | |
| Context | configure service vprn string network-interface string | |
| Tree | network-interface | |
| Introduced | 16.0.R1 | |
Platforms | All |
[interface-name] string
| Synopsis | Network interface name | |
| Context | configure service vprn string network-interface string | |
| Tree | network-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string network-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
cflowd-parameters
| Synopsis | Enter the cflowd-parameters context | |
| Context | configure service vprn string network-interface string cflowd-parameters | |
| Tree | cflowd-parameters | |
| Introduced | 16.0.R1 | |
Platforms | All |
sampling [sampling-type] keyword
| Synopsis | Enter the sampling list instance | |
| Context | configure service vprn string network-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
| Introduced | 16.0.R1 | |
Platforms | All |
[sampling-type] keyword
| Synopsis | Traffic sampling type | |
| Context | configure service vprn string network-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
Description | This command configures the type of traffic to be sampled on the associated IP interface. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
direction keyword
| Synopsis | Direction of traffic for cflowd sampling | |
| Context | configure service vprn string network-interface string cflowd-parameters sampling keyword direction keyword | |
| Tree | direction | |
Description | This command configures the direction in which sampling occurs on the associated IP interfaces. | |
| Options | ||
| Default | ingress-only | |
| Introduced | 16.0.R1 | |
Platforms | All |
sample-profile (keyword | number)
| Synopsis | Sample profile ID | |
| Context | configure service vprn string network-interface string cflowd-parameters sampling keyword sample-profile (keyword | number) | |
| Tree | sample-profile | |
Description | This command defines the sampling rate profile associated with this interface. | |
| Max. Range | 0 to 4294967295 | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms | All |
type keyword
| Synopsis | Type of cflowd analysis | |
| Context | configure service vprn string network-interface string cflowd-parameters sampling keyword type keyword | |
| Tree | type | |
Description | This command configures the cflowd sampling type on the associated IP interface. | |
| Options | ||
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpu-protection reference
| Synopsis | CPM Protection policy associated with an interface | |
| Context | configure service vprn string network-interface string cpu-protection reference | |
| Tree | cpu-protection | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS |
description string
| Synopsis | Text description | |
| Context | configure service vprn string network-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy | |
| Context | configure service vprn string network-interface string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
| Synopsis | Enter the egress context | |
| Context | configure service vprn string network-interface string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
filter
ip reference
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service vprn string network-interface string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string network-interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | All |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string network-interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string network-interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | All |
seconds number
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service vprn string network-interface string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
filter
ip reference
ingress-stats boolean
| Synopsis | Collect ingress statistics | |
| Context | configure service vprn string network-interface string ingress-stats boolean | |
| Tree | ingress-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service vprn string network-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string network-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | All |
allow-directed-broadcasts boolean
| Synopsis | Accept broadcasts that are directed to this interface | |
| Context | configure service vprn string network-interface string ipv4 allow-directed-broadcasts boolean | |
| Tree | allow-directed-broadcasts | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string network-interface string ipv4 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string network-interface string ipv4 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string network-interface string ipv4 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string network-interface string ipv4 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string network-interface string ipv4 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string network-interface string ipv4 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
icmp
mask-reply boolean
| Synopsis | Allow responses to ICMP mask requests on the interface | |
| Context | configure service vprn string network-interface string ipv4 icmp mask-reply boolean | |
| Tree | mask-reply | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service vprn string network-interface string ipv4 icmp param-problem | |
| Tree | param-problem | |
Description | Commands in this context specify the settings for ICMP Parameter Problem messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sent Parameter Problem messages | |
| Context | configure service vprn string network-interface string ipv4 icmp param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
| Synopsis | Maximum number of Parameter Problem messages to send | |
| Context | configure service vprn string network-interface string ipv4 icmp param-problem number number | |
| Tree | number | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Time used to limit number of Parameter Problem messages | |
| Context | configure service vprn string network-interface string ipv4 icmp param-problem seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
redirects
| Synopsis | Enter the redirects context | |
| Context | configure service vprn string network-interface string ipv4 icmp redirects | |
| Tree | redirects | |
Description | Commands in this context configure the settings for ICMP redirect messages generated by the interface. The system sends ICMP redirect messages to alert the sending node that a more optimal route is available on another router on the same subnetwork. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending ICMP redirect messages | |
| Context | configure service vprn string network-interface string ipv4 icmp redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
seconds number
ttl-expired
| Synopsis | Enter the ttl-expired context | |
| Context | configure service vprn string network-interface string ipv4 icmp ttl-expired | |
| Tree | ttl-expired | |
Description | Commands in this context configure the settings for ICMP TTL expired messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending TTL expired messages | |
| Context | configure service vprn string network-interface string ipv4 icmp ttl-expired admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
| Synopsis | Maximum number of TTL expired messages to send | |
| Context | configure service vprn string network-interface string ipv4 icmp ttl-expired number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Time used to limit the number of TTL expired messages | |
| Context | configure service vprn string network-interface string ipv4 icmp ttl-expired seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service vprn string network-interface string ipv4 icmp unreachables | |
| Tree | unreachables | |
Description | Commands in this context specify the settings for ICMP host and network destination unreachable messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of sending unreachable messages | |
| Context | configure service vprn string network-interface string ipv4 icmp unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
number number
| Synopsis | Maximum number of unreachable messages to send | |
| Context | configure service vprn string network-interface string ipv4 icmp unreachables number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
seconds number
| Synopsis | Time to limit the number of ICMP unreachable messages | |
| Context | configure service vprn string network-interface string ipv4 icmp unreachables seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | All |
retry-timer number
| Synopsis | ARP retry interval | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery retry-timer number | |
| Tree | retry-timer | |
| Range | 1 to 300 | |
| Units | deciseconds | |
| Default | 50 | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-neighbor [ipv4-address] string
| Synopsis | Enter the static-neighbor list instance | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-address] string
| Synopsis | IPv4 address that corresponds to the physical address | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery static-neighbor string | |
| Tree | static-neighbor | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac-address string
| Synopsis | MAC address for the static neighbor | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery static-neighbor string mac-address string | |
| Tree | mac-address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
| Synopsis | Timeout for an ARP entry learned on the interface | |
| Context | configure service vprn string network-interface string ipv4 neighbor-discovery timeout number | |
| Tree | timeout | |
Description | This command configures the minimum time an ARP entry learned on the IP interface is stored in the ARP table. ARP entries are automatically refreshed when an ARP request or gratuitous ARP is seen by an IP host. Otherwise, the ARP entry is aged from the ARP table. | |
| Range | 0 to 65535 | |
| Units | seconds | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms | All |
primary
address string
broadcast keyword
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string network-interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
secondary [address] string
[address] string
broadcast keyword
igp-inhibit boolean
| Synopsis | Disable the running IGP from recognizing secondary IP | |
| Context | configure service vprn string network-interface string ipv4 secondary string igp-inhibit boolean | |
| Tree | igp-inhibit | |
Description | When configured to true, the running IGP does not recognize the secondary IP address as a local interface. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string network-interface string ipv4 secondary string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
tcp-mss number
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service vprn string network-interface string ipv4 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | All |
ignore-default boolean
| Synopsis | Ignore default route when performing a uRPF check | |
| Context | configure service vprn string network-interface string ipv4 urpf-check ignore-default boolean | |
| Tree | ignore-default | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mode keyword
| Synopsis | Unicast RPF check mode | |
| Context | configure service vprn string network-interface string ipv4 urpf-check mode keyword | |
| Tree | mode | |
| Options | ||
| Default | strict | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lag
| Synopsis | Enter the lag context | |
| Context | configure service vprn string network-interface string lag | |
| Tree | lag | |
| Introduced | 16.0.R1 | |
Platforms | All |
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service vprn string network-interface string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service vprn string network-interface string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | All |
class number
| Synopsis | Class used on LAG egress using weighted per-link-hash | |
| Context | configure service vprn string network-interface string lag per-link-hash class number | |
| Tree | class | |
| Range | 1 to 3 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight used on LAG egress using weighted per-link-hash | |
| Context | configure service vprn string network-interface string lag per-link-hash weight number | |
| Tree | weight | |
| Range | 1 to 1024 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
load-balancing
| Synopsis | Enter the load-balancing context | |
| Context | configure service vprn string network-interface string load-balancing | |
| Tree | load-balancing | |
| Introduced | 16.0.R1 | |
Platforms | All |
flow-label-load-balancing boolean
| Synopsis | Enable flow label load balancing | |
| Context | configure service vprn string network-interface string load-balancing flow-label-load-balancing boolean | |
| Tree | flow-label-load-balancing | |
Description | When configured to true, the router enables load balancing in ECMP and LAG based on the output of a hash performed on the triplet (SA, DA, flow label) in the header of an IPv6 packet received on an IES, VPRN, R-VPLS, CSC, or network interface. When configured to false, the router disables load balancing in ECMP and LAG. | |
| Default | false | |
| Introduced | 21.5.R1 | |
|
Platforms | All |
ip-load-balancing keyword
| Synopsis | IP load-balancing algorithm | |
| Context | configure service vprn string network-interface string load-balancing ip-load-balancing keyword | |
| Tree | ip-load-balancing | |
Description | This command specifies whether to include the source address, destination address, or both in LAG or ECMP hash on IP interfaces. Additionally, when the l4-load-balancing command is enabled, this command also includes the source or destination port in the hash inputs. | |
| Options | ||
| Default | both | |
| Introduced | 16.0.R3 | |
Platforms | All |
lsr-load-balancing keyword
| Synopsis | LSR load-balancing algorithm | |
| Context | configure service vprn string network-interface string load-balancing lsr-load-balancing keyword | |
| Tree | lsr-load-balancing | |
Description | This command specifies whether the IP header is used in the LAG and ECMP LSR hashing algorithm. This is the per-interface setting. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
spi-load-balancing boolean
| Synopsis | Enable SPI use in hashing | |
| Context | configure service vprn string network-interface string load-balancing spi-load-balancing boolean | |
| Tree | spi-load-balancing | |
Description | When configured to true, the router uses the Security Parameter Index (SPI) in hashing for ESP and AH encrypted IPv4 and IPv6 traffic. This is a per-interface setting. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
teid-load-balancing boolean
| Synopsis | Enable use of TEID in hashing | |
| Context | configure service vprn string network-interface string load-balancing teid-load-balancing boolean | |
| Tree | teid-load-balancing | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
loopback
| Synopsis | Use interface as a loopback interface | |
| Context | configure service vprn string network-interface string loopback | |
| Tree | loopback | |
Notes | The following elements are part of a choice: loopback or port. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mac string
| Synopsis | MAC address for the interface | |
| Context | configure service vprn string network-interface string mac string | |
| Tree | mac | |
| Introduced | 16.0.R1 | |
Platforms | All |
port string
| Synopsis | Port to bind the interface | |
| Context | configure service vprn string network-interface string port string | |
| Tree | port | |
| String Length | 1 to 45 | |
Notes | The following elements are part of a choice: loopback or port. | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string network-interface string qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress-instance number
| Synopsis | Port egress queue group instance for this interface | |
| Context | configure service vprn string network-interface string qos egress-instance number | |
| Tree | egress-instance | |
Description | This command specifies which instance to associate with this specific network IP interface since multiple instances of the same egress queue-group can be applied to the same port. | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
egress-port-redirect-group reference
| Synopsis | QoS queue group name | |
| Context | configure service vprn string network-interface string qos egress-port-redirect-group reference | |
| Tree | egress-port-redirect-group | |
Description | This command configures the egress queue group used for all egress forwarding-class redirections specified within the network QoS policy ID. The specified queue group name must exist as an egress queue group applied to the egress context of the port associated with the IP interface. | |
Reference | configure qos queue-group-templates egress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress-fp-redirect-group reference
| Synopsis | Forwarding plane queue group policy for the interface | |
| Context | configure service vprn string network-interface string qos ingress-fp-redirect-group reference | |
| Tree | ingress-fp-redirect-group | |
Description | This command configures the ingress queue-group used for all ingress forwarding-class redirections specified within the network QoS policy ID. The specified queue group name must exist as an ingress queue group applied to the ingress context of the forwarding plane associated with the IP interface. | |
Reference | configure qos queue-group-templates ingress queue-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
ingress-instance number
| Synopsis | Forwarding plane ingress queue group for this interface | |
| Context | configure service vprn string network-interface string qos ingress-instance number | |
| Tree | ingress-instance | |
Description | This command configures which instance to associate with this specific network IP interface. An operator can apply multiple instances of the same ingress queue group to the same forwarding plane. | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
network-policy reference
| Synopsis | Network policy name associated with a network interface | |
| Context | configure service vprn string network-interface string qos network-policy reference | |
| Tree | network-policy | |
Description | This command associates an existing network policy name with the IP interface. | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
tos-marking-state keyword
| Synopsis | TOS marking state | |
| Context | configure service vprn string network-interface string tos-marking-state keyword | |
| Tree | tos-marking-state | |
| Options | ||
| Default | trusted | |
| Introduced | 16.0.R1 | |
Platforms | All |
ntp
admin-state keyword
| Synopsis | Administrative state of NTP execution | |
| Context | configure service vprn string ntp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authenticate boolean
| Synopsis | Authentication of NTP PDUs when acting as a server | |
| Context | configure service vprn string ntp authenticate boolean | |
| Tree | authenticate | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-check boolean
| Synopsis | Authenticate NTP PDUs and reject mismatches | |
| Context | configure service vprn string ntp authentication-check boolean | |
| Tree | authentication-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-key [key-id] number
| Synopsis | Enter the authentication-key list instance | |
| Context | configure service vprn string ntp authentication-key number | |
| Tree | authentication-key | |
| Introduced | 16.0.R1 | |
Platforms | All |
[key-id] number
| Synopsis | Authentication key ID used for NTP packets | |
| Context | configure service vprn string ntp authentication-key number | |
| Tree | authentication-key | |
| Range | 1 to 255 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
key string
type keyword
broadcast [interface-name] reference
[interface-name] reference
key-id reference
ttl number
version number
ospf [ospf-instance] number
[ospf-instance] number
admin-state keyword
| Synopsis | Administrative state of the OSPF instance | |
| Context | configure service vprn string ospf number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-router-capability keyword
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf number advertise-router-capability keyword | |
| Tree | advertise-router-capability | |
| Options | ||
| Default | false | |
| Introduced | 16.0.R1 | |
Platforms | All |
area [area-id] string
[area-id] string
advertise-ne-profile reference
| Synopsis | Network element profile to be advertised | |
| Context | configure service vprn string ospf number area string advertise-ne-profile reference | |
| Tree | advertise-ne-profile | |
Reference | configure system network-element-discovery profile string | |
| Introduced | 19.5.R1 | |
Platforms | All |
advertise-router-capability boolean
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf number area string advertise-router-capability boolean | |
| Tree | advertise-router-capability | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
area-range [ip-prefix-mask] string
| Synopsis | Enter the area-range list instance | |
| Context | configure service vprn string ospf number area string area-range string | |
| Tree | area-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix-mask] string
| Synopsis | IPv4 unicast address prefix and mask | |
| Context | configure service vprn string ospf number area string area-range string | |
| Tree | area-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise boolean
blackhole-aggregate boolean
| Synopsis | Install a low priority blackhole route to avoid loops | |
| Context | configure service vprn string ospf number area string blackhole-aggregate boolean | |
| Tree | blackhole-aggregate | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export-policy reference
| Synopsis | Type 3 Summary-LSA/OSPFv3 inter-area-prefix-LSA route | |
| Context | configure service vprn string ospf number area string export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Route imported as Summary Type 3/Inter-Area-Prefix-LSA | |
| Context | configure service vprn string ospf number area string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the OSPF interface | |
| Context | configure service vprn string ospf number area string interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-router-capability boolean
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf number area string interface string advertise-router-capability boolean | |
| Tree | advertise-router-capability | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
advertise-subnet boolean
| Synopsis | Advertise point-to-point interfaces as subnet routes | |
| Context | configure service vprn string ospf number area string interface string advertise-subnet boolean | |
| Tree | advertise-subnet | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication-key string
| Synopsis | Authentication key | |
| Context | configure service vprn string ospf number area string interface string authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 38 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
authentication-type keyword
| Synopsis | Authentication type used on OSPF interface | |
| Context | configure service vprn string ospf number area string interface string authentication-type keyword | |
| Tree | authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string ospf number area string interface string bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
remain-down-on-failure boolean
| Synopsis | Force adjacency down on failure until session returns | |
| Context | configure service vprn string ospf number area string interface string bfd-liveness remain-down-on-failure boolean | |
| Tree | remain-down-on-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
strict boolean
| Synopsis | Enable BFD strict mode | |
| Context | configure service vprn string ospf number area string interface string bfd-liveness strict boolean | |
| Tree | strict | |
Description | When configured to true, the system uses BFD strict-mode. BFD strict-mode mandates that an active BFD session must exist between the OSPF neighbors before establishing a full adjacency. When configured to true, the router uses Link-Local Signaling (LLS) with the B-flag set to instruct the OSPF neighbors that BFD must be enabled on the link. BFD strict-mode requires both sides to have the B-flag set. During OSPFv3 BFD strict-mode operations, the router advertises the local interface IPv4 address TLV using LLS, but the SR OS router continues to use IPv6-based BFD sessions for both the IPv4 and IPv6 address families. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All |
strict-mode-holddown number
| Synopsis | Adjacency up time delay after BFD session establishment | |
| Context | configure service vprn string ospf number area string interface string bfd-liveness strict-mode-holddown number | |
| Tree | strict-mode-holddown | |
Description | This command configures a delay timer before bringing up the OSPF adjacency after the BFD session establishment. Holddown helps mitigate potential routing churn when BFD sessions are unstable. The holddown timer is reset when a BFD session operationally toggles. | |
| Range | 1 to 600 | |
| Units | seconds | |
| Introduced | 23.3.R1 | |
Platforms |
All |
dead-interval number
| Synopsis | OSPF wait time for Hellos before neighbor declared down | |
| Context | configure service vprn string ospf number area string interface string dead-interval number | |
| Tree | dead-interval | |
| Range | 2 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-interval number
| Synopsis | Time between OSPF Hellos of this interface | |
| Context | configure service vprn string ospf number area string interface string hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Interface type | |
| Context | configure service vprn string ospf number area string interface string interface-type keyword | |
| Tree | interface-type | |
Description | This command specifies the interface type. broadcast - Broadcast network To significantly improve adjacency forming and network convergence, configure a network as point-to-point if only two routers are connected, even if the network is a broadcast media such as Ethernet. non-broadcast - Non-broadcast network point-to-point - Point-to-point link Set the interface type of an Ethernet link to point-to-point to avoid having to carry the broadcast adjacency maintenance overhead if the Ethernet link provided is used as a point-to-point. p2mp-nbma - Point-to-multipoint on a link without broadcast or multicast support No designated router or backup designated router is elected on this type of interface and all OSPF neighbors connect through individual point-to-point links. Only VPRN and IES services interfaces support this interface type. secondary - Multiple secondary adjacencies allowed A secondary interface allows multiple secondary adjacencies, in addition to the primary adjacency, to be established over a single IP interface. This interface type can also be applied to the system interface and to loopback interfaces to allow them to participate in multiple areas, although no adjacencies are formed over these types of interfaces. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All | |
load-balancing-weight number
| Synopsis | Configure load-balancing-weight. | |
| Context | configure service vprn string ospf number area string interface string load-balancing-weight number | |
| Tree | load-balancing-weight | |
| Range | 1 to 4294967295 | |
| Introduced | 20.2.R1 | |
Platforms | All |
loopfree-alternate
| Synopsis | Enter the loopfree-alternate context | |
| Context | configure service vprn string ospf number area string interface string loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R3 | |
Platforms | All |
exclude boolean
policy-map
| Synopsis | Enable the policy-map context | |
| Context | configure service vprn string ospf number area string interface string loopfree-alternate policy-map | |
| Tree | policy-map | |
| Introduced | 16.0.R3 | |
Platforms | All |
route-nh-template reference
| Synopsis | Route next hop policy template name | |
| Context | configure service vprn string ospf number area string interface string loopfree-alternate policy-map route-nh-template reference | |
| Tree | route-nh-template | |
Reference | configure routing-options route-next-hop-policy template string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R3 | |
Platforms | All |
lsa-filter-out keyword
| Synopsis | LSA flooding reduction | |
| Context | configure service vprn string ospf number area string interface string lsa-filter-out keyword | |
| Tree | lsa-filter-out | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
message-digest-key [key-id] number
| Synopsis | Enter the message-digest-key list instance | |
| Context | configure service vprn string ospf number area string interface string message-digest-key number | |
| Tree | message-digest-key | |
| Introduced | 16.0.R1 | |
Platforms | All |
[key-id] number
| Synopsis | Message digest index | |
| Context | configure service vprn string ospf number area string interface string message-digest-key number | |
| Tree | message-digest-key | |
| Range | 1 to 255 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
md5 string
metric number
mtu number
neighbor [address] string
[address] string
passive boolean
poll-interval number
| Synopsis | Interval for Hellos to non-adjacent OSPF NBMA neighbor | |
| Context | configure service vprn string ospf number area string interface string poll-interval number | |
| Tree | poll-interval | |
| Max. Range | 0 to 4294967295 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
priority number
retransmit-interval number
| Synopsis | Time before OSPF retransmits an unacknowledged LSA | |
| Context | configure service vprn string ospf number area string interface string retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
rib-priority keyword
| Synopsis | RIB priority for OSPF | |
| Context | configure service vprn string ospf number area string interface string rib-priority keyword | |
| Tree | rib-priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
transit-delay number
| Synopsis | Required LSA transmit time | |
| Context | configure service vprn string ospf number area string interface string transit-delay number | |
| Tree | transit-delay | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
loopfree-alternate-exclude boolean
| Synopsis | Exclude interfaces in OSPF areas in SPF LFA computation | |
| Context | configure service vprn string ospf number area string loopfree-alternate-exclude boolean | |
| Tree | loopfree-alternate-exclude | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
nssa
area-range [ip-prefix-mask] string
| Synopsis | Enter the area-range list instance | |
| Context | configure service vprn string ospf number area string nssa area-range string | |
| Tree | area-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix-mask] string
| Synopsis | IPv4 unicast address prefix and mask | |
| Context | configure service vprn string ospf number area string nssa area-range string | |
| Tree | area-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise boolean
originate-default-route
| Synopsis | Enable the originate-default-route context | |
| Context | configure service vprn string ospf number area string nssa originate-default-route | |
| Tree | originate-default-route | |
| Introduced | 16.0.R1 | |
Platforms | All |
adjacency-check boolean
| Synopsis | Perform adjacency checks before originating a default route | |
| Context | configure service vprn string ospf number area string nssa originate-default-route adjacency-check boolean | |
| Tree | adjacency-check | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type-nssa boolean
redistribute-external boolean
| Synopsis | Redistribute external routes into the NSSA | |
| Context | configure service vprn string ospf number area string nssa redistribute-external boolean | |
| Tree | redistribute-external | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
summaries boolean
sham-link [interface] string ip-address string
[interface] string
ip-address string
admin-state keyword
| Synopsis | Administrative state of the OSPF interface | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | Authentication key to send and receive OSPF packets | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 38 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | TCP authentication keychain for the session | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string authentication-keychain reference | |
| Tree | authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type to be used | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string authentication-type keyword | |
| Tree | authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
dead-interval number
| Synopsis | OSPF wait time for Hellos before neighbor declared down | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string dead-interval number | |
| Tree | dead-interval | |
| Range | 2 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-interval number
| Synopsis | Time between OSPF Hellos of this interface | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-digest-key [key-id] number
| Synopsis | Enter the message-digest-key list instance | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string message-digest-key number | |
| Tree | message-digest-key | |
| Introduced | 16.0.R1 | |
Platforms | All |
[key-id] number
| Synopsis | Message digest index | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string message-digest-key number | |
| Tree | message-digest-key | |
| Range | 1 to 255 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
md5 string
| Synopsis | MD5 key or hash key | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string message-digest-key number md5 string | |
| Tree | md5 | |
| String Length | 1 to 51 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
metric number
retransmit-interval number
| Synopsis | Time before OSPF retransmits an unacknowledged LSA | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-delay number
| Synopsis | Required LSA transmit time | |
| Context | configure service vprn string ospf number area string sham-link string ip-address string transit-delay number | |
| Tree | transit-delay | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
stub
default-metric number
| Synopsis | Metric used by ABR for default route into the stub area | |
| Context | configure service vprn string ospf number area string stub default-metric number | |
| Tree | default-metric | |
| Range | 1 to 16777214 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
summaries boolean
virtual-link [router-id] string transit-area reference
| Synopsis | Enter the virtual-link list instance | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
| Introduced | 16.0.R1 | |
Platforms | All |
[router-id] string
| Synopsis | Router identity of the virtual link neighbor | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-area reference
| Synopsis | Transit area that links backbone area to area without physical connection with the backbone | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the OSPF interface | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-key string
| Synopsis | Authentication key | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference authentication-key string | |
| Tree | authentication-key | |
| String Length | 1 to 38 | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication-keychain reference
| Synopsis | TCP authentication keychain for the session | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference authentication-keychain reference | |
| Tree | authentication-keychain | |
Reference | ||
| Introduced | 16.0.R3 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type used on OSPF interface | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference authentication-type keyword | |
| Tree | authentication-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
dead-interval number
| Synopsis | OSPF wait time for Hellos before neighbor declared down | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference dead-interval number | |
| Tree | dead-interval | |
| Range | 2 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-interval number
| Synopsis | Time between OSPF Hellos of this interface | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
message-digest-key [key-id] number
| Synopsis | Enter the message-digest-key list instance | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference message-digest-key number | |
| Tree | message-digest-key | |
| Introduced | 16.0.R1 | |
Platforms | All |
[key-id] number
| Synopsis | Message digest index | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference message-digest-key number | |
| Tree | message-digest-key | |
| Range | 1 to 255 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
md5 string
| Synopsis | MD5 hash key | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference message-digest-key number md5 string | |
| Tree | md5 | |
| String Length | 1 to 51 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
retransmit-interval number
| Synopsis | Time before OSPF retransmits an unacknowledged LSA | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-delay number
| Synopsis | Required LSA transmit time | |
| Context | configure service vprn string ospf number area string virtual-link string transit-area reference transit-delay number | |
| Tree | transit-delay | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
compatible-rfc1583 boolean
| Synopsis | OSPF summary and external route calculations | |
| Context | configure service vprn string ospf number compatible-rfc1583 boolean | |
| Tree | compatible-rfc1583 | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export-limit
| Synopsis | Enable the export-limit context | |
| Context | configure service vprn string ospf number export-limit | |
| Tree | export-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-percent number
| Synopsis | Export limit before warning and SNMP notification sent | |
| Context | configure service vprn string ospf number export-limit log-percent number | |
| Tree | log-percent | |
| Range | 1 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
number number
export-policy reference
| Synopsis | Export policies that determine exported routes | |
| Context | configure service vprn string ospf number export-policy reference | |
| Tree | export-policy | |
Description | This command configures export routing policies for the routes exported from the routing table to IS-IS. If the export policy is undefined, the system does not export non IS-IS routes from the routing table manager to IS-IS. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. If the aggregate command is also configured in the configure router context, the aggregation is applied before the export policy is applied. Routing policies are created in the configure router policy-options context. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
external-db-overflow
| Synopsis | Enable the external-db-overflow context | |
| Context | configure service vprn string ospf number external-db-overflow | |
| Tree | external-db-overflow | |
| Introduced | 16.0.R1 | |
Platforms | All |
interval number
limit number
external-preference number
| Synopsis | Preference for OSPF external routes | |
| Context | configure service vprn string ospf number external-preference number | |
| Tree | external-preference | |
| Range | 1 to 255 | |
| Default | 150 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string ospf number graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
helper-mode boolean
| Synopsis | Enable graceful restart helper for OSPF | |
| Context | configure service vprn string ospf number graceful-restart helper-mode boolean | |
| Tree | helper-mode | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
strict-lsa-checking boolean
| Synopsis | Perform strict LSA checking during graceful restart | |
| Context | configure service vprn string ospf number graceful-restart strict-lsa-checking boolean | |
| Tree | strict-lsa-checking | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ignore-dn-bit boolean
| Synopsis | Ignore the DN bit for OSPF LSA packets for the instance | |
| Context | configure service vprn string ospf number ignore-dn-bit boolean | |
| Tree | ignore-dn-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy names for routes from IGP to route table | |
| Context | configure service vprn string ospf number import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
loopfree-alternate
| Synopsis | Enable the loopfree-alternate context | |
| Context | configure service vprn string ospf number loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R1 | |
Platforms | All |
exclude
prefix-policy reference
| Synopsis | Policy to exclude prefixes from LFA SPF calculation | |
| Context | configure service vprn string ospf number loopfree-alternate exclude prefix-policy reference | |
| Tree | prefix-policy | |
Description | This command specifies the name of the policy for the prefixes to exclude from the LFA SPF calculation. An excluded prefix is not included in LFA calculation regardless of its priority. The prefix tag is, however, used in the main SPF. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R3 | |
Platforms | All |
multicast-import boolean
| Synopsis | Submit routes into the multicast Route Table Manager | |
| Context | configure service vprn string ospf number multicast-import boolean | |
| Tree | multicast-import | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload boolean
overload-include-ext-1 boolean
| Synopsis | Advertise routes with maximum metric value for overload | |
| Context | configure service vprn string ospf number overload-include-ext-1 boolean | |
| Tree | overload-include-ext-1 | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
overload-include-ext-2 boolean
| Synopsis | Advertise routes with maximum metric value for overload | |
| Context | configure service vprn string ospf number overload-include-ext-2 boolean | |
| Tree | overload-include-ext-2 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-include-stub boolean
| Synopsis | Advertise all stub interfaces with max metric value | |
| Context | configure service vprn string ospf number overload-include-stub boolean | |
| Tree | overload-include-stub | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-on-boot
| Synopsis | Enable the overload-on-boot context | |
| Context | configure service vprn string ospf number overload-on-boot | |
| Tree | overload-on-boot | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
preference number
| Synopsis | Preference for OSPF internal routes | |
| Context | configure service vprn string ospf number preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
reference-bandwidth number
| Synopsis | Bandwidth to reference default costing of interfaces | |
| Context | configure service vprn string ospf number reference-bandwidth number | |
| Tree | reference-bandwidth | |
| Range | 1 to 18446744073709551615 | |
| Units | kilobps | |
| Default | 100000000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
rib-priority
| Synopsis | Enter the rib-priority context | |
| Context | configure service vprn string ospf number rib-priority | |
| Tree | rib-priority | |
| Introduced | 16.0.R1 | |
Platforms | All |
high
prefix-list reference
| Synopsis | Higher priority list used during OSPF route calculation | |
| Context | configure service vprn string ospf number rib-priority high prefix-list reference | |
| Tree | prefix-list | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
router-id string
rtr-adv-lsa-limit
| Synopsis | Enable the rtr-adv-lsa-limit context | |
| Context | configure service vprn string ospf number rtr-adv-lsa-limit | |
| Tree | rtr-adv-lsa-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-only boolean
max-lsa-count number
| Synopsis | Max number of LSAs one router can advertise | |
| Context | configure service vprn string ospf number rtr-adv-lsa-limit max-lsa-count number | |
| Tree | max-lsa-count | |
| Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
overload-timeout (number | keyword)
| Synopsis | Maximum time in overload after LSA limit is reached | |
| Context | configure service vprn string ospf number rtr-adv-lsa-limit overload-timeout (number | keyword) | |
| Tree | overload-timeout | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Options | ||
| Default | forever | |
| Introduced | 16.0.R1 | |
Platforms |
All |
warning-threshold number
| Synopsis | Percentage of the max LSA count that causes a warning | |
| Context | configure service vprn string ospf number rtr-adv-lsa-limit warning-threshold number | |
| Tree | warning-threshold | |
| Range | 0 to 100 | |
| Units | percent | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | All |
super-backbone boolean
| Synopsis | Enable/disable super-backbone functionality. | |
| Context | configure service vprn string ospf number super-backbone boolean | |
| Tree | super-backbone | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
suppress-dn-bit boolean
| Synopsis | Suppress the DN bit setting for OSPF LSA packets | |
| Context | configure service vprn string ospf number suppress-dn-bit boolean | |
| Tree | suppress-dn-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
timers
incremental-spf-wait number
| Synopsis | Delay time before an incremental SPF calculation starts | |
| Context | configure service vprn string ospf number timers incremental-spf-wait number | |
| Tree | incremental-spf-wait | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-accumulate number
| Synopsis | Delay to gather LSAs before advertising to neighbors | |
| Context | configure service vprn string ospf number timers lsa-accumulate number | |
| Tree | lsa-accumulate | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-arrival number
| Synopsis | Min delay between receipt of same LSAs from neighbors | |
| Context | configure service vprn string ospf number timers lsa-arrival number | |
| Tree | lsa-arrival | |
| Range | 0 to 600000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-generate
| Synopsis | Enter the lsa-generate context | |
| Context | configure service vprn string ospf number timers lsa-generate | |
| Tree | lsa-generate | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-initial-wait number
| Synopsis | First wait period between OSPF LSA generation | |
| Context | configure service vprn string ospf number timers lsa-generate lsa-initial-wait number | |
| Tree | lsa-initial-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
lsa-second-wait number
| Synopsis | Hold time between the first and second LSA generation | |
| Context | configure service vprn string ospf number timers lsa-generate lsa-second-wait number | |
| Tree | lsa-second-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-lsa-wait number
| Synopsis | Max time between two LSAs being generated | |
| Context | configure service vprn string ospf number timers lsa-generate max-lsa-wait number | |
| Tree | max-lsa-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
redistribute-delay number
| Synopsis | Hold down timer for external routes into OSPF | |
| Context | configure service vprn string ospf number timers redistribute-delay number | |
| Tree | redistribute-delay | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
spf-wait
spf-initial-wait number
| Synopsis | Initial SPF calculation delay after a topology change | |
| Context | configure service vprn string ospf number timers spf-wait spf-initial-wait number | |
| Tree | spf-initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-max-wait number
| Synopsis | Max interval between two consecutive SPF calculations | |
| Context | configure service vprn string ospf number timers spf-wait spf-max-wait number | |
| Tree | spf-max-wait | |
| Range | 10 to 120000 | |
| Units | milliseconds | |
| Default | 10000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-second-wait number
| Synopsis | Hold time between the first and second SPF calculation | |
| Context | configure service vprn string ospf number timers spf-wait spf-second-wait number | |
| Tree | spf-second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
unicast-import boolean
| Synopsis | Submit routes into the unicast Route Table Manager | |
| Context | configure service vprn string ospf number unicast-import boolean | |
| Tree | unicast-import | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
vpn-domain
| Synopsis | Enable the vpn-domain context | |
| Context | configure service vprn string ospf number vpn-domain | |
| Tree | vpn-domain | |
| Introduced | 16.0.R1 | |
Platforms | All |
id string
| Synopsis | OSPF VPN domain ID | |
| Context | configure service vprn string ospf number vpn-domain id string | |
| Tree | id | |
Description | This command specifies the OSPF VPN domain. This is exchanged using BGP in the Extended Community attribute associated with a prefix. | |
| String Length | 14 | |
| Default | 0000.0000.0000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
type keyword
vpn-tag number
ospf3 [ospf-instance] number
[ospf-instance] number
admin-state keyword
| Synopsis | Administrative state of the OSPF instance | |
| Context | configure service vprn string ospf3 number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-router-capability keyword
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf3 number advertise-router-capability keyword | |
| Tree | advertise-router-capability | |
| Options | ||
| Default | false | |
| Introduced | 16.0.R1 | |
Platforms | All |
area [area-id] string
[area-id] string
advertise-router-capability boolean
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf3 number area string advertise-router-capability boolean | |
| Tree | advertise-router-capability | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
area-range [ip-prefix-mask] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the area-range list instance | |
| Context | configure service vprn string ospf3 number area string area-range (ipv4-prefix | ipv6-prefix) | |
| Tree | area-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix-mask] (ipv4-prefix | ipv6-prefix)
| Synopsis | Address ranges to create on an ABR for route summarization or suppression | |
| Context | configure service vprn string ospf3 number area string area-range (ipv4-prefix | ipv6-prefix) | |
| Tree | area-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise boolean
blackhole-aggregate boolean
| Synopsis | Install a low priority blackhole route to avoid loops | |
| Context | configure service vprn string ospf3 number area string blackhole-aggregate boolean | |
| Tree | blackhole-aggregate | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
export-policy reference
| Synopsis | Type 3 Summary-LSA/OSPFv3 inter-area-prefix-LSA route | |
| Context | configure service vprn string ospf3 number area string export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
import-policy reference
| Synopsis | Route imported as Summary Type 3/Inter-Area-Prefix-LSA | |
| Context | configure service vprn string ospf3 number area string import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the OSPF interface | |
| Context | configure service vprn string ospf3 number area string interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise-router-capability boolean
| Synopsis | Allow router advertisement capabilities | |
| Context | configure service vprn string ospf3 number area string interface string advertise-router-capability boolean | |
| Tree | advertise-router-capability | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
authentication
| Synopsis | Enable the authentication context | |
| Context | configure service vprn string ospf3 number area string interface string authentication | |
| Tree | authentication | |
| Introduced | 16.0.R6 | |
Platforms | All |
inbound reference
outbound reference
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string ospf3 number area string interface string bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
remain-down-on-failure boolean
| Synopsis | Force adjacency down on failure until session returns | |
| Context | configure service vprn string ospf3 number area string interface string bfd-liveness remain-down-on-failure boolean | |
| Tree | remain-down-on-failure | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
strict boolean
| Synopsis | Enable BFD strict mode | |
| Context | configure service vprn string ospf3 number area string interface string bfd-liveness strict boolean | |
| Tree | strict | |
Description | When configured to true, the system uses BFD strict-mode. BFD strict-mode mandates that an active BFD session must exist between the OSPF neighbors before establishing a full adjacency. When configured to true, the router uses Link-Local Signaling (LLS) with the B-flag set to instruct the OSPF neighbors that BFD must be enabled on the link. BFD strict-mode requires both sides to have the B-flag set. During OSPFv3 BFD strict-mode operations, the router advertises the local interface IPv4 address TLV using LLS, but the SR OS router continues to use IPv6-based BFD sessions for both the IPv4 and IPv6 address families. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | All |
strict-mode-holddown number
| Synopsis | Adjacency up time delay after BFD session establishment | |
| Context | configure service vprn string ospf3 number area string interface string bfd-liveness strict-mode-holddown number | |
| Tree | strict-mode-holddown | |
Description | This command configures a delay timer before bringing up the OSPF adjacency after the BFD session establishment. Holddown helps mitigate potential routing churn when BFD sessions are unstable. The holddown timer is reset when a BFD session operationally toggles. | |
| Range | 1 to 600 | |
| Units | seconds | |
| Introduced | 23.3.R1 | |
Platforms |
All |
dead-interval number
| Synopsis | OSPF wait time for Hellos before neighbor declared down | |
| Context | configure service vprn string ospf3 number area string interface string dead-interval number | |
| Tree | dead-interval | |
| Range | 2 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-interval number
| Synopsis | Time between OSPF Hellos of this interface | |
| Context | configure service vprn string ospf3 number area string interface string hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Interface type | |
| Context | configure service vprn string ospf3 number area string interface string interface-type keyword | |
| Tree | interface-type | |
Description | This command specifies the interface type. broadcast - Broadcast network To significantly improve adjacency forming and network convergence, configure a network as point-to-point if only two routers are connected, even if the network is a broadcast media such as Ethernet. non-broadcast - Non-broadcast network point-to-point - Point-to-point link Set the interface type of an Ethernet link to point-to-point to avoid having to carry the broadcast adjacency maintenance overhead if the Ethernet link provided is used as a point-to-point. p2mp-nbma - Point-to-multipoint on a link without broadcast or multicast support No designated router or backup designated router is elected on this type of interface and all OSPF neighbors connect through individual point-to-point links. Only VPRN and IES services interfaces support this interface type. secondary - Multiple secondary adjacencies allowed A secondary interface allows multiple secondary adjacencies, in addition to the primary adjacency, to be established over a single IP interface. This interface type can also be applied to the system interface and to loopback interfaces to allow them to participate in multiple areas, although no adjacencies are formed over these types of interfaces. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All | |
load-balancing-weight number
| Synopsis | Configure load-balancing-weight. | |
| Context | configure service vprn string ospf3 number area string interface string load-balancing-weight number | |
| Tree | load-balancing-weight | |
| Range | 1 to 4294967295 | |
| Introduced | 20.2.R1 | |
Platforms | All |
loopfree-alternate
| Synopsis | Enter the loopfree-alternate context | |
| Context | configure service vprn string ospf3 number area string interface string loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R3 | |
Platforms | All |
exclude boolean
policy-map
| Synopsis | Enable the policy-map context | |
| Context | configure service vprn string ospf3 number area string interface string loopfree-alternate policy-map | |
| Tree | policy-map | |
| Introduced | 16.0.R3 | |
Platforms | All |
route-nh-template reference
| Synopsis | Route next hop policy template name | |
| Context | configure service vprn string ospf3 number area string interface string loopfree-alternate policy-map route-nh-template reference | |
| Tree | route-nh-template | |
Reference | configure routing-options route-next-hop-policy template string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R3 | |
Platforms | All |
lsa-filter-out keyword
| Synopsis | LSA flooding reduction | |
| Context | configure service vprn string ospf3 number area string interface string lsa-filter-out keyword | |
| Tree | lsa-filter-out | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
metric number
mtu number
neighbor [address] (ipv4-address-no-zone | ipv6-address-no-zone)
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
passive boolean
poll-interval number
| Synopsis | Interval for Hellos to non-adjacent OSPF NBMA neighbor | |
| Context | configure service vprn string ospf3 number area string interface string poll-interval number | |
| Tree | poll-interval | |
| Max. Range | 0 to 4294967295 | |
| Units | seconds | |
| Default | 120 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
priority number
retransmit-interval number
| Synopsis | Time before OSPF retransmits an unacknowledged LSA | |
| Context | configure service vprn string ospf3 number area string interface string retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
rib-priority keyword
| Synopsis | RIB priority for OSPF | |
| Context | configure service vprn string ospf3 number area string interface string rib-priority keyword | |
| Tree | rib-priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
transit-delay number
| Synopsis | Required LSA transmit time | |
| Context | configure service vprn string ospf3 number area string interface string transit-delay number | |
| Tree | transit-delay | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
key-rollover-interval number
| Synopsis | Key rollover interval | |
| Context | configure service vprn string ospf3 number area string key-rollover-interval number | |
| Tree | key-rollover-interval | |
| Range | 10 to 300 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
loopfree-alternate-exclude boolean
| Synopsis | Exclude interfaces in OSPF areas in SPF LFA computation | |
| Context | configure service vprn string ospf3 number area string loopfree-alternate-exclude boolean | |
| Tree | loopfree-alternate-exclude | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
nssa
area-range [ip-prefix-mask] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the area-range list instance | |
| Context | configure service vprn string ospf3 number area string nssa area-range (ipv4-prefix | ipv6-prefix) | |
| Tree | area-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix-mask] (ipv4-prefix | ipv6-prefix)
| Synopsis | Address ranges to create on an ABR for route summarization or suppression | |
| Context | configure service vprn string ospf3 number area string nssa area-range (ipv4-prefix | ipv6-prefix) | |
| Tree | area-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
advertise boolean
originate-default-route
| Synopsis | Enable the originate-default-route context | |
| Context | configure service vprn string ospf3 number area string nssa originate-default-route | |
| Tree | originate-default-route | |
| Introduced | 16.0.R1 | |
Platforms | All |
adjacency-check boolean
| Synopsis | Perform adjacency checks before originating a default route | |
| Context | configure service vprn string ospf3 number area string nssa originate-default-route adjacency-check boolean | |
| Tree | adjacency-check | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type-nssa boolean
redistribute-external boolean
| Synopsis | Redistribute external routes into the NSSA | |
| Context | configure service vprn string ospf3 number area string nssa redistribute-external boolean | |
| Tree | redistribute-external | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
summaries boolean
stub
default-metric number
| Synopsis | Metric used by ABR for default route into the stub area | |
| Context | configure service vprn string ospf3 number area string stub default-metric number | |
| Tree | default-metric | |
| Range | 1 to 16777214 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
summaries boolean
virtual-link [router-id] string transit-area reference
| Synopsis | Enter the virtual-link list instance | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
| Introduced | 16.0.R1 | |
Platforms | All |
[router-id] string
| Synopsis | Router identity of the virtual link neighbor | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-area reference
| Synopsis | Transit area that links backbone area to area without physical connection with the backbone | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference | |
| Tree | virtual-link | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the OSPF interface | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
authentication
| Synopsis | Enable the authentication context | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference authentication | |
| Tree | authentication | |
| Introduced | 16.0.R6 | |
Platforms | All |
inbound reference
| Synopsis | sa-name | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference authentication inbound reference | |
| Tree | inbound | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R6 | |
Platforms | All |
outbound reference
| Synopsis | sa-name | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference authentication outbound reference | |
| Tree | outbound | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R6 | |
Platforms | All |
dead-interval number
| Synopsis | OSPF wait time for Hellos before neighbor declared down | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference dead-interval number | |
| Tree | dead-interval | |
| Range | 2 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-interval number
| Synopsis | Time between OSPF Hellos of this interface | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference hello-interval number | |
| Tree | hello-interval | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | All |
retransmit-interval number
| Synopsis | Time before OSPF retransmits an unacknowledged LSA | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference retransmit-interval number | |
| Tree | retransmit-interval | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit-delay number
| Synopsis | Required LSA transmit time | |
| Context | configure service vprn string ospf3 number area string virtual-link string transit-area reference transit-delay number | |
| Tree | transit-delay | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
export-limit
| Synopsis | Enable the export-limit context | |
| Context | configure service vprn string ospf3 number export-limit | |
| Tree | export-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-percent number
| Synopsis | Export limit before warning and SNMP notification sent | |
| Context | configure service vprn string ospf3 number export-limit log-percent number | |
| Tree | log-percent | |
| Range | 1 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
number number
export-policy reference
| Synopsis | Export policies that determine exported routes | |
| Context | configure service vprn string ospf3 number export-policy reference | |
| Tree | export-policy | |
Description | This command configures export routing policies for the routes exported from the routing table to IS-IS. If the export policy is undefined, the system does not export non IS-IS routes from the routing table manager to IS-IS. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. If the aggregate command is also configured in the configure router context, the aggregation is applied before the export policy is applied. Routing policies are created in the configure router policy-options context. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
external-db-overflow
| Synopsis | Enable the external-db-overflow context | |
| Context | configure service vprn string ospf3 number external-db-overflow | |
| Tree | external-db-overflow | |
| Introduced | 16.0.R1 | |
Platforms | All |
interval number
limit number
external-preference number
| Synopsis | Preference for OSPF external routes | |
| Context | configure service vprn string ospf3 number external-preference number | |
| Tree | external-preference | |
| Range | 1 to 255 | |
| Default | 150 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
graceful-restart
| Synopsis | Enable the graceful-restart context | |
| Context | configure service vprn string ospf3 number graceful-restart | |
| Tree | graceful-restart | |
| Introduced | 16.0.R1 | |
Platforms | All |
helper-mode boolean
| Synopsis | Enable graceful restart helper for OSPF | |
| Context | configure service vprn string ospf3 number graceful-restart helper-mode boolean | |
| Tree | helper-mode | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
strict-lsa-checking boolean
| Synopsis | Perform strict LSA checking during graceful restart | |
| Context | configure service vprn string ospf3 number graceful-restart strict-lsa-checking boolean | |
| Tree | strict-lsa-checking | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ignore-dn-bit boolean
| Synopsis | Ignore the DN bit for OSPF LSA packets for the instance | |
| Context | configure service vprn string ospf3 number ignore-dn-bit boolean | |
| Tree | ignore-dn-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
import-policy reference
| Synopsis | Import policy names for routes from IGP to route table | |
| Context | configure service vprn string ospf3 number import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
loopfree-alternate
| Synopsis | Enable the loopfree-alternate context | |
| Context | configure service vprn string ospf3 number loopfree-alternate | |
| Tree | loopfree-alternate | |
| Introduced | 16.0.R1 | |
Platforms | All |
exclude
prefix-policy reference
| Synopsis | Policy to exclude prefixes from LFA SPF calculation | |
| Context | configure service vprn string ospf3 number loopfree-alternate exclude prefix-policy reference | |
| Tree | prefix-policy | |
Description | This command specifies the name of the policy for the prefixes to exclude from the LFA SPF calculation. An excluded prefix is not included in LFA calculation regardless of its priority. The prefix tag is, however, used in the main SPF. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R3 | |
Platforms | All |
multicast-import boolean
| Synopsis | Submit routes into the multicast Route Table Manager | |
| Context | configure service vprn string ospf3 number multicast-import boolean | |
| Tree | multicast-import | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload boolean
overload-include-ext-1 boolean
| Synopsis | Advertise routes with maximum metric value for overload | |
| Context | configure service vprn string ospf3 number overload-include-ext-1 boolean | |
| Tree | overload-include-ext-1 | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
overload-include-ext-2 boolean
| Synopsis | Advertise routes with maximum metric value for overload | |
| Context | configure service vprn string ospf3 number overload-include-ext-2 boolean | |
| Tree | overload-include-ext-2 | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-include-stub boolean
| Synopsis | Advertise all stub interfaces with max metric value | |
| Context | configure service vprn string ospf3 number overload-include-stub boolean | |
| Tree | overload-include-stub | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
overload-on-boot
| Synopsis | Enable the overload-on-boot context | |
| Context | configure service vprn string ospf3 number overload-on-boot | |
| Tree | overload-on-boot | |
| Introduced | 16.0.R1 | |
Platforms | All |
timeout number
preference number
| Synopsis | Preference for OSPF internal routes | |
| Context | configure service vprn string ospf3 number preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
reference-bandwidth number
| Synopsis | Bandwidth to reference default costing of interfaces | |
| Context | configure service vprn string ospf3 number reference-bandwidth number | |
| Tree | reference-bandwidth | |
| Range | 1 to 18446744073709551615 | |
| Units | kilobps | |
| Default | 100000000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
rib-priority
| Synopsis | Enter the rib-priority context | |
| Context | configure service vprn string ospf3 number rib-priority | |
| Tree | rib-priority | |
| Introduced | 16.0.R1 | |
Platforms | All |
high
prefix-list reference
| Synopsis | Higher priority list used during OSPF route calculation | |
| Context | configure service vprn string ospf3 number rib-priority high prefix-list reference | |
| Tree | prefix-list | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
router-id string
rtr-adv-lsa-limit
| Synopsis | Enable the rtr-adv-lsa-limit context | |
| Context | configure service vprn string ospf3 number rtr-adv-lsa-limit | |
| Tree | rtr-adv-lsa-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
log-only boolean
max-lsa-count number
| Synopsis | Max number of LSAs one router can advertise | |
| Context | configure service vprn string ospf3 number rtr-adv-lsa-limit max-lsa-count number | |
| Tree | max-lsa-count | |
| Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
overload-timeout (number | keyword)
| Synopsis | Maximum time in overload after LSA limit is reached | |
| Context | configure service vprn string ospf3 number rtr-adv-lsa-limit overload-timeout (number | keyword) | |
| Tree | overload-timeout | |
| Range | 1 to 1800 | |
| Units | seconds | |
| Options | ||
| Default | forever | |
| Introduced | 16.0.R1 | |
Platforms |
All |
warning-threshold number
| Synopsis | Percentage of the max LSA count that causes a warning | |
| Context | configure service vprn string ospf3 number rtr-adv-lsa-limit warning-threshold number | |
| Tree | warning-threshold | |
| Range | 0 to 100 | |
| Units | percent | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | All |
suppress-dn-bit boolean
| Synopsis | Suppress the DN bit setting for OSPF LSA packets | |
| Context | configure service vprn string ospf3 number suppress-dn-bit boolean | |
| Tree | suppress-dn-bit | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
timers
incremental-spf-wait number
| Synopsis | Delay time before an incremental SPF calculation starts | |
| Context | configure service vprn string ospf3 number timers incremental-spf-wait number | |
| Tree | incremental-spf-wait | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-accumulate number
| Synopsis | Delay to gather LSAs before advertising to neighbors | |
| Context | configure service vprn string ospf3 number timers lsa-accumulate number | |
| Tree | lsa-accumulate | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-arrival number
| Synopsis | Min delay between receipt of same LSAs from neighbors | |
| Context | configure service vprn string ospf3 number timers lsa-arrival number | |
| Tree | lsa-arrival | |
| Range | 0 to 600000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-generate
| Synopsis | Enter the lsa-generate context | |
| Context | configure service vprn string ospf3 number timers lsa-generate | |
| Tree | lsa-generate | |
| Introduced | 16.0.R1 | |
Platforms | All |
lsa-initial-wait number
| Synopsis | First wait period between OSPF LSA generation | |
| Context | configure service vprn string ospf3 number timers lsa-generate lsa-initial-wait number | |
| Tree | lsa-initial-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
lsa-second-wait number
| Synopsis | Hold time between the first and second LSA generation | |
| Context | configure service vprn string ospf3 number timers lsa-generate lsa-second-wait number | |
| Tree | lsa-second-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-lsa-wait number
| Synopsis | Max time between two LSAs being generated | |
| Context | configure service vprn string ospf3 number timers lsa-generate max-lsa-wait number | |
| Tree | max-lsa-wait | |
| Range | 10 to 600000 | |
| Units | milliseconds | |
| Default | 5000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
redistribute-delay number
| Synopsis | Hold down timer for external routes into OSPF | |
| Context | configure service vprn string ospf3 number timers redistribute-delay number | |
| Tree | redistribute-delay | |
| Range | 0 to 1000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms | All |
spf-wait
spf-initial-wait number
| Synopsis | Initial SPF calculation delay after a topology change | |
| Context | configure service vprn string ospf3 number timers spf-wait spf-initial-wait number | |
| Tree | spf-initial-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-max-wait number
| Synopsis | Max interval between two consecutive SPF calculations | |
| Context | configure service vprn string ospf3 number timers spf-wait spf-max-wait number | |
| Tree | spf-max-wait | |
| Range | 10 to 120000 | |
| Units | milliseconds | |
| Default | 10000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
spf-second-wait number
| Synopsis | Hold time between the first and second SPF calculation | |
| Context | configure service vprn string ospf3 number timers spf-wait spf-second-wait number | |
| Tree | spf-second-wait | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 1000 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
unicast-import boolean
| Synopsis | Submit routes into the unicast Route Table Manager | |
| Context | configure service vprn string ospf3 number unicast-import boolean | |
| Tree | unicast-import | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pcp
server [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of the PCP server | |
| Context | configure service vprn string pcp server string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string pcp server string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dual-stack-lite-address string
| Synopsis | Inside Dual Stack Lite AFTR address | |
| Context | configure service vprn string pcp server string dual-stack-lite-address string | |
| Tree | dual-stack-lite-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fwd-inside-router string
| Synopsis | PCP forwarding inside virtual router instance | |
| Context | configure service vprn string pcp server string fwd-inside-router string | |
| Tree | fwd-inside-router | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interface [name] reference
[name] reference
policy reference
pim
admin-state keyword
| Synopsis | Administrative state of PIM | |
| Context | configure service vprn string pim admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
apply-to keyword
bgp-nh-override boolean
| Synopsis | Disable VRF import EC support for next-hop resolution | |
| Context | configure service vprn string pim bgp-nh-override boolean | |
| Tree | bgp-nh-override | |
Description | When configured to true, the RPF check is performed using IPv4 VPN AF next-hop instead of IPv4 AF VRF import extended community (EC). When configured to false, the RPF check is performed using IPv4 AF VRF import EC. | |
| Default | false | |
| Introduced | 19.7.R1 | |
|
Platforms | All |
import
join-policy reference
| Synopsis | Policy name | |
| Context | configure service vprn string pim import join-policy reference | |
| Tree | join-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
register-policy reference
| Synopsis | Policy name | |
| Context | configure service vprn string pim import register-policy reference | |
| Tree | register-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the PIM interface | |
| Context | configure service vprn string pim interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
assert-period number
| Synopsis | Time for periodic refreshes of PIM Assert messages on an interface | |
| Context | configure service vprn string pim interface string assert-period number | |
| Tree | assert-period | |
| Range | 1 to 300 | |
| Default | 60 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
bfd-liveness
| Synopsis | Enter the bfd-liveness context | |
| Context | configure service vprn string pim interface string bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 boolean
ipv6 boolean
bsm-check-rtr-alert boolean
| Synopsis | Check router alert option in bootstrap messages received | |
| Context | configure service vprn string pim interface string bsm-check-rtr-alert boolean | |
| Tree | bsm-check-rtr-alert | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hello-interval number
| Synopsis | Frequency at which PIM Hello messages are sent over this interface | |
| Context | configure service vprn string pim interface string hello-interval number | |
| Tree | hello-interval | |
| Range | 0 to 255 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
hello-multiplier number
| Synopsis | Multiplier to determine the hold time for PIM neighbor | |
| Context | configure service vprn string pim interface string hello-multiplier number | |
| Tree | hello-multiplier | |
| Range | 20 to 100 | |
| Default | 35 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
improved-assert boolean
| Synopsis | Allow improved assert processing on interface | |
| Context | configure service vprn string pim interface string improved-assert boolean | |
| Tree | improved-assert | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
instant-prune-echo boolean
| Synopsis | Allow PIM to send an instant prune echo when router starts the prune pending timer for PIM interface | |
| Context | configure service vprn string pim interface string instant-prune-echo boolean | |
| Tree | instant-prune-echo | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv4
monitor-oper-group
| Synopsis | Enter the monitor-oper-group context | |
| Context | configure service vprn string pim interface string ipv4 monitor-oper-group | |
| Tree | monitor-oper-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
name reference
| Synopsis | Operational group identifier | |
| Context | configure service vprn string pim interface string ipv4 monitor-oper-group name reference | |
| Tree | name | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
operation keyword
priority-delta number
| Synopsis | Delta priority with operation when operational group is active | |
| Context | configure service vprn string pim interface string ipv4 monitor-oper-group priority-delta number | |
| Tree | priority-delta | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
multicast boolean
ipv6
monitor-oper-group
| Synopsis | Enter the monitor-oper-group context | |
| Context | configure service vprn string pim interface string ipv6 monitor-oper-group | |
| Tree | monitor-oper-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
name reference
| Synopsis | Operational group identifier | |
| Context | configure service vprn string pim interface string ipv6 monitor-oper-group name reference | |
| Tree | name | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | All |
operation keyword
priority-delta number
| Synopsis | Delta priority with operation when operational group is active | |
| Context | configure service vprn string pim interface string ipv6 monitor-oper-group priority-delta number | |
| Tree | priority-delta | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
multicast boolean
max-groups number
| Synopsis | Maximum number of groups for the interface | |
| Context | configure service vprn string pim interface string max-groups number | |
| Tree | max-groups | |
| Range | 0 | 1 to 16000 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mcac
bandwidth
mandatory (number | keyword)
total (number | keyword)
interface-policy reference
| Synopsis | Name of multicast CAC interface policy | |
| Context | configure service vprn string pim interface string mcac interface-policy reference | |
| Tree | interface-policy | |
Reference | configure mcac interface-policy string | |
| Introduced | 16.0.R1 | |
Platforms | All |
mc-constraints
| Synopsis | Enter the mc-constraints context | |
| Context | configure service vprn string pim interface string mcac mc-constraints | |
| Tree | mc-constraints | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the multicast CAC constraints | |
| Context | configure service vprn string pim interface string mcac mc-constraints admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
level [level-id] number
[level-id] number
bandwidth number
number-down [number-lag-port-down] number
| Synopsis | Enter the number-down list instance | |
| Context | configure service vprn string pim interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Introduced | 16.0.R1 | |
Platforms | All |
[number-lag-port-down] number
| Synopsis | Number of ports that are down in this LAG link | |
| Context | configure service vprn string pim interface string mcac mc-constraints number-down number | |
| Tree | number-down | |
| Range | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
level number
| Synopsis | Level ID to associate with number of down LAG ports | |
| Context | configure service vprn string pim interface string mcac mc-constraints number-down number level number | |
| Tree | level | |
Description | This command specifies the bandwidth for a given level. Level 1 has the highest priority and level 8 has the lowest priority. | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
use-lag-port-weight boolean
| Synopsis | Use LAG port weight in calculating MCAC constraints | |
| Context | configure service vprn string pim interface string mcac mc-constraints use-lag-port-weight boolean | |
| Tree | use-lag-port-weight | |
Description | When configured to true, port weight is used when determining available bandwidth per level when LAG ports go down or come up. This command is required for proper operation on mixed port-speed LAGs and can also be used for unmixed port-speed LAGs. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Multicast CAC policy name | |
| Context | configure service vprn string pim interface string mcac policy reference | |
| Tree | policy | |
Description | This command configures the name of the global channel bandwidth definition policy that is used for (H)MCAC and HQoS adjustment. Within the scope of HQoS adjustment, the channel definition policy under the group interface is used if redirection is unconfigured. In this case, the HQoS adjustment can be applied to IPoE subscribers in per-SAP replication mode. If redirection is configured, the channel bandwidth definition policy applied under the Layer 3 redirected interface is in effect. Hierarchical MCAC (HMCAC) is supported on two levels simultaneously:
In HMCAC, the subscriber is checked against its bandwidth limits first, then against the bandwidth limits of the redirected or group interface. If redirection is configured but the policy is referenced only under the group interface, no admission control is executed (HMCAC or MCAC). | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | All |
multicast-senders keyword
| Synopsis | Subnet matching for the incoming data packets | |
| Context | configure service vprn string pim interface string multicast-senders keyword | |
| Tree | multicast-senders | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
p2mp-ldp-tree-join
| Synopsis | Enter the p2mp-ldp-tree-join context | |
| Context | configure service vprn string pim interface string p2mp-ldp-tree-join | |
| Tree | p2mp-ldp-tree-join | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv4 boolean
ipv6 boolean
priority number
sticky-dr
priority number
three-way-hello boolean
| Synopsis | Allow three-way hello compatibility mode | |
| Context | configure service vprn string pim interface string three-way-hello boolean | |
| Tree | three-way-hello | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tracking-support boolean
| Synopsis | Allow upstream routers to explicitly track join membership | |
| Context | configure service vprn string pim interface string tracking-support boolean | |
| Tree | tracking-support | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv4
admin-state keyword
| Synopsis | Administrative state of PIM operation for IPv4 | |
| Context | configure service vprn string pim ipv4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | All |
grt-extranet
| Synopsis | Enter the grt-extranet context | |
| Context | configure service vprn string pim ipv4 grt-extranet | |
| Tree | grt-extranet | |
| Introduced | 16.0.R1 | |
Platforms | All |
any
group-prefix [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the group-prefix list instance | |
| Context | configure service vprn string pim ipv4 grt-extranet group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | The following elements are part of a choice: any or group-prefix. | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IP address and mask length | |
| Context | configure service vprn string pim ipv4 grt-extranet group-prefix (ipv4-prefix | ipv6-prefix) | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
starg boolean
| Synopsis | Add a static (*,G) entry | |
| Context | configure service vprn string pim ipv4 grt-extranet group-prefix (ipv4-prefix | ipv6-prefix) starg boolean | |
| Tree | starg | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rpf-table keyword
source-address
| Synopsis | Enter the source-address context | |
| Context | configure service vprn string pim ipv4 source-address | |
| Tree | source-address | |
Description | Commands in this context configure the source IP address for PIM messages. | |
| Introduced | 23.3.R1 | |
Platforms | All |
register-message string
| Synopsis | Source IPv4 address for PIM register messages | |
| Context | configure service vprn string pim ipv4 source-address register-message string | |
| Tree | register-message | |
Description | This command configures the source IPv4 address for register messages in this PIM instance. The IP address can be set to any unicast address, regardless of whether it resides on the node. Ensure that the specified IP address is configured on the router as a loopback or interface IP address. When unconfigured, the source IP address for register messages is selected by choosing the smallest IP address from available interfaces on the node. | |
| Introduced | 23.3.R1 | |
Platforms | All |
ssm-assert-compatible-mode boolean
| Synopsis | Enable SSM assert compatible mode | |
| Context | configure service vprn string pim ipv4 ssm-assert-compatible-mode boolean | |
| Tree | ssm-assert-compatible-mode | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ssm-default-range boolean
| Synopsis | SSM default range | |
| Context | configure service vprn string pim ipv4 ssm-default-range boolean | |
| Tree | ssm-default-range | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6
admin-state keyword
| Synopsis | Administrative state of PIM operation for IPv6 | |
| Context | configure service vprn string pim ipv6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
rpf-table keyword
source-address
| Synopsis | Enter the source-address context | |
| Context | configure service vprn string pim ipv6 source-address | |
| Tree | source-address | |
Description | Commands in this context configure the source IP address for PIM messages. | |
| Introduced | 23.3.R1 | |
Platforms | All |
register-message string
| Synopsis | Source IPv6 address for PIM register messages | |
| Context | configure service vprn string pim ipv6 source-address register-message string | |
| Tree | register-message | |
Description | This command configures the source IPv6 address for register messages in this PIM instance. The IP address can be set to any unicast address, regardless of whether it resides on the node. Ensure that the specified IP address is configured on the router as a loopback or interface IP address. When unconfigured, the source IP address for register messages is selected by choosing the smallest IP address from available interfaces on the node. | |
| Introduced | 23.3.R1 | |
Platforms | All |
ssm-default-range boolean
| Synopsis | SSM default range | |
| Context | configure service vprn string pim ipv6 ssm-default-range boolean | |
| Tree | ssm-default-range | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mc-ecmp-balance boolean
| Synopsis | Enable multicast balancing of traffic over ECMP links | |
| Context | configure service vprn string pim mc-ecmp-balance boolean | |
| Tree | mc-ecmp-balance | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mc-ecmp-balance-hold number
| Synopsis | Hold time for multicast balancing over ECMP links | |
| Context | configure service vprn string pim mc-ecmp-balance-hold number | |
| Tree | mc-ecmp-balance-hold | |
| Range | 2 to 600 | |
| Units | minutes | |
| Introduced | 16.0.R1 | |
Platforms |
All |
mc-ecmp-hashing
| Synopsis | Enable the mc-ecmp-hashing context | |
| Context | configure service vprn string pim mc-ecmp-hashing | |
| Tree | mc-ecmp-hashing | |
| Introduced | 16.0.R1 | |
Platforms | All |
rebalance boolean
mtu-over-head number
| Synopsis | MVPN tunnel MTU size reduction to allow for BIER header | |
| Context | configure service vprn string pim mtu-over-head number | |
| Tree | mtu-over-head | |
Description | This command subtracts the specified value from the MVPN tunnel MTU to allow a BIER header to be added without exceeding the network MTU. | |
| Range | 0 | 44 | 76 | 140 | 268 | 536 | |
| Default | 0 | |
| Introduced | 20.5.R1 | |
Platforms |
All |
non-dr-attract-traffic boolean
| Synopsis | Attract traffic when the router is not the designated one | |
| Context | configure service vprn string pim non-dr-attract-traffic boolean | |
| Tree | non-dr-attract-traffic | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rp
bootstrap
export reference
| Synopsis | Export policy to control the flow of bootstrap messages | |
| Context | configure service vprn string pim rp bootstrap export reference | |
| Tree | export | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
import reference
| Synopsis | Import policy to control the flow of bootstrap messages | |
| Context | configure service vprn string pim rp bootstrap import reference | |
| Tree | import | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4
anycast [ipv4-address] string rp-set-peer string
[ipv4-address] string
rp-set-peer string
auto-rp-discovery boolean
| Synopsis | Enable auto RP discovery | |
| Context | configure service vprn string pim rp ipv4 auto-rp-discovery boolean | |
| Tree | auto-rp-discovery | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
bsr-candidate
| Synopsis | Enter the bsr-candidate context | |
| Context | configure service vprn string pim rp ipv4 bsr-candidate | |
| Tree | bsr-candidate | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
admin-state keyword
| Synopsis | Administrative state of the Candidate BSR | |
| Context | configure service vprn string pim rp ipv4 bsr-candidate admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
hash-mask-len number
| Synopsis | Length for bootstrap hash mask | |
| Context | configure service vprn string pim rp ipv4 bsr-candidate hash-mask-len number | |
| Tree | hash-mask-len | |
| Range | 0 to 32 | |
| Default | 30 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
priority number
candidate boolean
| Synopsis | Enable auto-RP to advertise candidate RP information | |
| Context | configure service vprn string pim rp ipv4 candidate boolean | |
| Tree | candidate | |
Description | When configured to true, the auto-RP is enabled to advertise the candidate RP information. The auto-RP candidate RP announces the candidate RP messages on the 224.0.1.39 multicast address. This functionality is in addition to the listener functionality enabled by the auto RP discovery. When configured to false, the candidate RP information is not specified. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
mapping-agent boolean
| Synopsis | Enable the mapping agent on the node | |
| Context | configure service vprn string pim rp ipv4 mapping-agent boolean | |
| Tree | mapping-agent | |
Description | When configured to true, the mapping agent is enabled on the node. The auto-RP MA observes the auto-rp-announcement messages, selects the RP and generates the RP discovery 224.0.1.40 messages. This functionality is in addition to the auto-RP discovery functionality. | |
| Default | false | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
rp-candidate
| Synopsis | Enter the rp-candidate context | |
| Context | configure service vprn string pim rp ipv4 rp-candidate | |
| Tree | rp-candidate | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
admin-state keyword
| Synopsis | Administrative state of the Candidate RP | |
| Context | configure service vprn string pim rp ipv4 rp-candidate admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range [ipv4-prefix] string
| Synopsis | Add a list entry for group-range | |
| Context | configure service vprn string pim rp ipv4 rp-candidate group-range string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-prefix] string
| Synopsis | IPv4 address and prefix length | |
| Context | configure service vprn string pim rp ipv4 rp-candidate group-range string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
holdtime number
priority number
static
address [ipv4-address] string
[ipv4-address] string
group-prefix [ipv4-prefix] string
| Synopsis | Add a list entry for group-prefix | |
| Context | configure service vprn string pim rp ipv4 static address string group-prefix string | |
| Tree | group-prefix | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv4-prefix] string
| Synopsis | IPv4 address and prefix length | |
| Context | configure service vprn string pim rp ipv4 static address string group-prefix string | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
override boolean
ipv6
anycast [ipv6-address] string rp-set-peer string
[ipv6-address] string
rp-set-peer string
bsr-candidate
| Synopsis | Enter the bsr-candidate context | |
| Context | configure service vprn string pim rp ipv6 bsr-candidate | |
| Tree | bsr-candidate | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
admin-state keyword
| Synopsis | Administrative state of the Candidate BSR | |
| Context | configure service vprn string pim rp ipv6 bsr-candidate admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
hash-mask-len number
| Synopsis | Length for bootstrap hash mask | |
| Context | configure service vprn string pim rp ipv6 bsr-candidate hash-mask-len number | |
| Tree | hash-mask-len | |
| Range | 0 to 128 | |
| Default | 126 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
priority number
embedded-rp
| Synopsis | Enable the embedded-rp context | |
| Context | configure service vprn string pim rp ipv6 embedded-rp | |
| Tree | embedded-rp | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of embedded RP | |
| Context | configure service vprn string pim rp ipv6 embedded-rp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range [ipv6-prefix] string
| Synopsis | Add a list entry for group-range | |
| Context | configure service vprn string pim rp ipv6 embedded-rp group-range string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-prefix] string
| Synopsis | IPv6 address and prefix length | |
| Context | configure service vprn string pim rp ipv6 embedded-rp group-range string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rp-candidate
| Synopsis | Enter the rp-candidate context | |
| Context | configure service vprn string pim rp ipv6 rp-candidate | |
| Tree | rp-candidate | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
admin-state keyword
| Synopsis | Administrative state of the Candidate RP | |
| Context | configure service vprn string pim rp ipv6 rp-candidate admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range [ipv6-prefix] string
| Synopsis | Add a list entry for group-range | |
| Context | configure service vprn string pim rp ipv6 rp-candidate group-range string | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-prefix] string
| Synopsis | IPv6 address and prefix length | |
| Context | configure service vprn string pim rp ipv6 rp-candidate group-range string | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
holdtime number
priority number
static
address [ipv6-address] string
[ipv6-address] string
group-prefix [ipv6-prefix] string
| Synopsis | Add a list entry for group-prefix | |
| Context | configure service vprn string pim rp ipv6 static address string group-prefix string | |
| Tree | group-prefix | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipv6-prefix] string
| Synopsis | IPv6 address and prefix length | |
| Context | configure service vprn string pim rp ipv6 static address string group-prefix string | |
| Tree | group-prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
override boolean
spt-switchover [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Enter the spt-switchover list instance | |
| Context | configure service vprn string pim spt-switchover (ipv4-prefix | ipv6-prefix) | |
| Tree | spt-switchover | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IP address and mask length | |
| Context | configure service vprn string pim spt-switchover (ipv4-prefix | ipv6-prefix) | |
| Tree | spt-switchover | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
threshold (number | keyword)
ssm-groups
| Synopsis | Enter the ssm-groups context | |
| Context | configure service vprn string pim ssm-groups | |
| Tree | ssm-groups | |
| Introduced | 16.0.R1 | |
Platforms | All |
group-range [ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | Add a list entry for group-range | |
| Context | configure service vprn string pim ssm-groups group-range (ipv4-prefix | ipv6-prefix) | |
| Tree | group-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IP address and mask length | |
| Context | configure service vprn string pim ssm-groups group-range (ipv4-prefix | ipv6-prefix) | |
| Tree | group-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
radius
proxy [name] string
[name] string
admin-state keyword
| Synopsis | Administrative state of RADIUS proxy | |
| Context | configure service vprn string radius proxy string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-matching
| Synopsis | Enter the attribute-matching context | |
| Context | configure service vprn string radius proxy string attribute-matching | |
| Tree | attribute-matching | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
entry [index] number
[index] number
accounting-server-policy string
| Synopsis | Accounting server policy | |
| Context | configure service vprn string radius proxy string attribute-matching entry number accounting-server-policy string | |
| Tree | accounting-server-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
authentication-server-policy string
| Synopsis | Authentication server policy | |
| Context | configure service vprn string radius proxy string attribute-matching entry number authentication-server-policy string | |
| Tree | authentication-server-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-string string
| Synopsis | Prefix string | |
| Context | configure service vprn string radius proxy string attribute-matching entry number prefix-string string | |
| Tree | prefix-string | |
| String Length | 1 to 128 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
suffix-string string
| Synopsis | Prefix string | |
| Context | configure service vprn string radius proxy string attribute-matching entry number suffix-string string | |
| Tree | suffix-string | |
| String Length | 1 to 128 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
vendor (number | keyword)
cache
admin-state keyword
| Synopsis | Administrative state of the RADIUS proxy cache | |
| Context | configure service vprn string radius proxy string cache admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
key
attribute-type number
| Synopsis | RADIUS attribute type to cache for this RADIUS proxy server | |
| Context | configure service vprn string radius proxy string cache key attribute-type number | |
| Tree | attribute-type | |
| Range | 1 to 255 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-type keyword
| Synopsis | Packet type of the RADIUS messages | |
| Context | configure service vprn string radius proxy string cache key packet-type keyword | |
| Tree | packet-type | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
timeout number
track-accounting
| Synopsis | Enter the track-accounting context | |
| Context | configure service vprn string radius proxy string cache track-accounting | |
| Tree | track-accounting | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
accounting-off boolean
| Synopsis | Remove all ESM hosts associated with the RADIUS client | |
| Context | configure service vprn string radius proxy string cache track-accounting accounting-off boolean | |
| Tree | accounting-off | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
accounting-on boolean
| Synopsis | Remove all ESM hosts associated with the RADIUS client | |
| Context | configure service vprn string radius proxy string cache track-accounting accounting-on boolean | |
| Tree | accounting-on | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interim-update boolean
| Synopsis | Update the ESM host with the RADIUS client that generated the interim update | |
| Context | configure service vprn string radius proxy string cache track-accounting interim-update boolean | |
| Tree | interim-update | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start boolean
stop boolean
track-authentication
| Synopsis | Enter the track-authentication context | |
| Context | configure service vprn string radius proxy string cache track-authentication | |
| Tree | track-authentication | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
accept boolean
track-delete-hold-time number
| Synopsis | Delete hold time | |
| Context | configure service vprn string radius proxy string cache track-delete-hold-time number | |
| Tree | track-delete-hold-time | |
| Range | 0 to 6000 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
accounting-server-policy string
| Synopsis | Default accounting RADIUS server policy | |
| Context | configure service vprn string radius proxy string defaults accounting-server-policy string | |
| Tree | accounting-server-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
authentication-server-policy string
| Synopsis | Default authentication RADIUS server policy | |
| Context | configure service vprn string radius proxy string defaults authentication-server-policy string | |
| Tree | authentication-server-policy | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string radius proxy string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface [interface-name] reference
[interface-name] reference
load-balance-key
| Synopsis | Enter the load-balance-key context | |
| Context | configure service vprn string radius proxy string load-balance-key | |
| Tree | load-balance-key | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-1
| Synopsis | Enter the attribute-1 context | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-1 | |
| Tree | attribute-1 | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
| Synopsis | Attribute type to cache for this RADIUS Proxy server | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-1 type number | |
| Tree | type | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
| Synopsis | Vendor-Id attribute | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-1 vendor (number | keyword) | |
| Tree | vendor | |
| Range | 1 to 16777215 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-2
| Synopsis | Enter the attribute-2 context | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-2 | |
| Tree | attribute-2 | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
| Synopsis | Attribute type to cache for this RADIUS Proxy server | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-2 type number | |
| Tree | type | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
| Synopsis | Vendor-Id attribute | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-2 vendor (number | keyword) | |
| Tree | vendor | |
| Range | 1 to 16777215 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-3
| Synopsis | Enter the attribute-3 context | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-3 | |
| Tree | attribute-3 | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
| Synopsis | Attribute type to cache for this RADIUS Proxy server | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-3 type number | |
| Tree | type | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
| Synopsis | Vendor-Id attribute | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-3 vendor (number | keyword) | |
| Tree | vendor | |
| Range | 1 to 16777215 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-4
| Synopsis | Enter the attribute-4 context | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-4 | |
| Tree | attribute-4 | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
| Synopsis | Attribute type to cache for this RADIUS Proxy server | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-4 type number | |
| Tree | type | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
| Synopsis | Vendor-Id attribute | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-4 vendor (number | keyword) | |
| Tree | vendor | |
| Range | 1 to 16777215 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
attribute-5
| Synopsis | Enter the attribute-5 context | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-5 | |
| Tree | attribute-5 | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type number
| Synopsis | Attribute type to cache for this RADIUS Proxy server | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-5 type number | |
| Tree | type | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor (number | keyword)
| Synopsis | Vendor-Id attribute | |
| Context | configure service vprn string radius proxy string load-balance-key attribute-5 vendor (number | keyword) | |
| Tree | vendor | |
| Range | 1 to 16777215 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-ip-udp
| Synopsis | Key to consist of the source IP address and source UDP port of the RADIUS message | |
| Context | configure service vprn string radius proxy string load-balance-key source-ip-udp | |
| Tree | source-ip-udp | |
Notes | The following elements are part of a choice: (attribute-1, attribute-2, attribute-3, attribute-4, and attribute-5) or source-ip-udp. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
purpose keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Purpose of the RADIUS proxy | |
| Context | configure service vprn string radius proxy string purpose keyword | |
| Tree | purpose | |
| Options | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vprn string radius proxy string python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
secret string
send-accounting-response boolean
| Synopsis | Allow RADIUS proxy server to respond to Accounting-Response messages | |
| Context | configure service vprn string radius proxy string send-accounting-response boolean | |
| Tree | send-accounting-response | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw
address string
| Synopsis | IPv4 address of the distributed RADIUS proxy server | |
| Context | configure service vprn string radius proxy string wlan-gw address string | |
| Tree | address | |
Description | This command configures the IPv4 address of the distributed RADIUS proxy server for use by the access points. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv6-address string
| Synopsis | IPv6 address of the distributed RADIUS proxy server | |
| Context | configure service vprn string radius proxy string wlan-gw ipv6-address string | |
| Tree | ipv6-address | |
Description | This command configures the IPv6 address of the distributed RADIUS proxy server for use by the access points. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA WLAN gateway group | |
| Context | configure service vprn string radius proxy string wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
server [name] string
[name] string
accept-coa boolean
| Synopsis | Process Change of Authorization (CoA) messages | |
| Context | configure service vprn string radius server string accept-coa boolean | |
| Tree | accept-coa | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
acct-port number
address (ipv4-address-no-zone | ipv6-address-no-zone)
auth-port number
description string
| Synopsis | Text description | |
| Context | configure service vprn string radius server string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pending-requests-limit number
| Synopsis | Limit of the number for pending RADIUS requests | |
| Context | configure service vprn string radius server string pending-requests-limit number | |
| Tree | pending-requests-limit | |
| Range | 1 to 4096 | |
| Default | 4096 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python script policy to modify CoA messages | |
| Context | configure service vprn string radius server string python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
secret string
reassembly
| Synopsis | Enable the reassembly context | |
| Context | configure service vprn string reassembly | |
| Tree | reassembly | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-group number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | NAT group (including WLAN Gateway group) that executes the reassembly | |
| Context | configure service vprn string reassembly nat-group number | |
| Tree | nat-group | |
| Max. Range | 0 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
to-base-network boolean
| Synopsis | Allow reassembled traffic sent to network interface | |
| Context | configure service vprn string reassembly to-base-network boolean | |
| Tree | to-base-network | |
| Default | false | |
| Introduced | 19.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
redundant-interface [interface-name] string
| Synopsis | Enter the redundant-interface list instance | |
| Context | configure service vprn string redundant-interface string | |
| Tree | redundant-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Interface name | |
| Context | configure service vprn string redundant-interface string | |
| Tree | redundant-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string redundant-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string redundant-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service vprn string redundant-interface string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string redundant-interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string redundant-interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string redundant-interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ip-mtu number
| Synopsis | IP MTU applied to outgoing packets | |
| Context | configure service vprn string redundant-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string redundant-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
primary
address string
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string redundant-interface string ipv4 primary prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-ip string
spoke-sdp [sdp-bind-id] string
| Synopsis | Enter the spoke-sdp list instance | |
| Context | configure service vprn string redundant-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sdp-bind-id] string
| Synopsis | SDP binding ID | |
| Context | configure service vprn string redundant-interface string spoke-sdp string | |
| Tree | spoke-sdp | |
| String Length | 3 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SDP binding to the service | |
| Context | configure service vprn string redundant-interface string spoke-sdp string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
control-word boolean
| Synopsis | Use the control word as preferred | |
| Context | configure service vprn string redundant-interface string spoke-sdp string control-word boolean | |
| Tree | control-word | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string redundant-interface string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
egress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress MPLS VC label to send packets to the far end | |
| Context | configure service vprn string redundant-interface string spoke-sdp string egress vc-label number | |
| Tree | vc-label | |
| Range | 16 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ingress
filter
ip reference
vc-label number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress MPLS VC label to send packets to the far end | |
| Context | configure service vprn string redundant-interface string spoke-sdp string ingress vc-label number | |
| Tree | vc-label | |
| Range | 1 to 1048575 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
rip
admin-state keyword
| Synopsis | Administrative state of the RIP instance | |
| Context | configure service vprn string rip admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-key string
| Synopsis | Authentication password passed between RIP neighbors | |
| Context | configure service vprn string rip authentication-key string | |
| Tree | authentication-key | |
Description | This command sets the authentication password to be passed between RIP neighbors. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, this command removes the authentication password from the configuration and disables authentication. | |
| String Length | 1 to 51 | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type used between RIP neighbors | |
| Context | configure service vprn string rip authentication-type keyword | |
| Tree | authentication-type | |
Description | This command sets the type of authentication to be used between RIP neighbors. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, this command removes the authentication type from the configuration and effectively disables authentication. | |
| Options | ||
| Default | none | |
| Introduced | 16.0.R4 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string rip bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string rip check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string rip description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-limit
| Synopsis | Enable the export-limit context | |
| Context | configure service vprn string rip export-limit | |
| Tree | export-limit | |
| Introduced | 16.0.R4 | |
Platforms | All |
log-percent number
| Synopsis | Export limit before warning and SNMP notification sent | |
| Context | configure service vprn string rip export-limit log-percent number | |
| Tree | log-percent | |
| Range | 1 to 100 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
number number
export-policy reference
| Synopsis | Policies to determine exported routes | |
| Context | configure service vprn string rip export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
group [group-name] string
[group-name] string
admin-state keyword
| Synopsis | Administrative state of RIP neighbor interface group | |
| Context | configure service vprn string rip group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-key string
| Synopsis | Authentication password passed between RIP neighbors | |
| Context | configure service vprn string rip group string authentication-key string | |
| Tree | authentication-key | |
Description | This command sets the authentication password to be passed between RIP neighbors. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, the authentication password is removed from the configuration and authentication is disabled. | |
| String Length | 1 to 51 | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type | |
| Context | configure service vprn string rip group string authentication-type keyword | |
| Tree | authentication-type | |
Description | This command configures the type of authentication to be used. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, this command removes the authentication type from the configuration and effectively disables authentication. | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms |
All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string rip group string bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Introduced | 16.0.R4 | |
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string rip group string check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Introduced | 16.0.R4 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string rip group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-policy reference
| Synopsis | Policies used to rule which routes are exported to RIP | |
| Context | configure service vprn string rip group string export-policy reference | |
| Tree | export-policy | |
Description | This command specifies the export route policies used to determine which routes are exported to RIP. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
import-policy reference
| Synopsis | Policies to decide routes accepted from RIP neighbors | |
| Context | configure service vprn string rip group string import-policy reference | |
| Tree | import-policy | |
Description | This command configures import route policies to determine which routes are accepted from RIP neighbors. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes per RIP update message | |
| Context | configure service vprn string rip group string message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIP | |
| Context | configure service vprn string rip group string metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
neighbor [interface-name] string
[interface-name] string
admin-state keyword
| Synopsis | Administrative state of the RIP neighbor interface | |
| Context | configure service vprn string rip group string neighbor string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-key string
| Synopsis | Authentication password passed between RIP neighbors | |
| Context | configure service vprn string rip group string neighbor string authentication-key string | |
| Tree | authentication-key | |
Description | This command sets the authentication password to be passed between RIP neighbors. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, this command removes the authentication password from the configuration and disables authentication. | |
| String Length | 1 to 51 | |
| Introduced | 16.0.R4 | |
Platforms | All |
authentication-type keyword
| Synopsis | Authentication type | |
| Context | configure service vprn string rip group string neighbor string authentication-type keyword | |
| Tree | authentication-type | |
Description | This command configures the type of authentication to be used. The authentication type and authentication key must match exactly for the RIP message to be considered authentic and processed. When unconfigured, this command removes the authentication type from the configuration and effectively disables authentication. | |
| Options | ||
| Introduced | 16.0.R4 | |
Platforms |
All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string rip group string neighbor string bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Introduced | 16.0.R4 | |
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string rip group string neighbor string check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Introduced | 16.0.R4 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string rip group string neighbor string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-policy reference
| Synopsis | Policies used to rule which routes are exported to RIP | |
| Context | configure service vprn string rip group string neighbor string export-policy reference | |
| Tree | export-policy | |
Description | This command specifies the export route policies used to determine which routes are exported to RIP. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
import-policy reference
| Synopsis | Policies to decide routes accepted from RIP neighbors | |
| Context | configure service vprn string rip group string neighbor string import-policy reference | |
| Tree | import-policy | |
Description | This command configures import route policies to determine which routes are accepted from RIP neighbors. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes per RIP update message | |
| Context | configure service vprn string rip group string neighbor string message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIP | |
| Context | configure service vprn string rip group string neighbor string metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string rip group string neighbor string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string rip group string neighbor string split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false. this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Introduced | 16.0.R4 | |
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string rip group string neighbor string timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string rip group string neighbor string timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
unicast-address [address] string
| Synopsis | Add a list entry for unicast-address | |
| Context | configure service vprn string rip group string neighbor string unicast-address string | |
| Tree | unicast-address | |
| Introduced | 16.0.R4 | |
Platforms | All |
[address] string
| Synopsis | Unicast IPv6 address for the neighbor | |
| Context | configure service vprn string rip group string neighbor string unicast-address string | |
| Tree | unicast-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string rip group string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string rip group string split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false. this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Introduced | 16.0.R4 | |
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string rip group string timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string rip group string timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
import-policy reference
| Synopsis | Import policies to decide routes for routing table | |
| Context | configure service vprn string rip import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes in the RIP message | |
| Context | configure service vprn string rip message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Default | 25 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIP | |
| Context | configure service vprn string rip metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Default | 1 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string rip preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 100 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
propagate-metric boolean
| Synopsis | Enable the BGP MED used to configure the RIP metric | |
| Context | configure service vprn string rip propagate-metric boolean | |
| Tree | propagate-metric | |
Description | When configured to true, this command enables the BGP MED to be used to configure the RIP metric at the BGP to RIP transition on egress routers. When configured to false, this command sets the RIP metric to the optional value configured with the metric-out command plus one. | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string rip split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false. this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string rip timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string rip timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
ripng
admin-state keyword
| Synopsis | Administrative state of the RIPng instance | |
| Context | configure service vprn string ripng admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string ripng bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string ripng check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string ripng description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-limit
| Synopsis | Enable the export-limit context | |
| Context | configure service vprn string ripng export-limit | |
| Tree | export-limit | |
| Introduced | 16.0.R4 | |
Platforms | All |
log-percent number
| Synopsis | Export limit before warning and SNMP notification sent | |
| Context | configure service vprn string ripng export-limit log-percent number | |
| Tree | log-percent | |
| Range | 1 to 100 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
number number
export-policy reference
| Synopsis | Policies to determine exported routes | |
| Context | configure service vprn string ripng export-policy reference | |
| Tree | export-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
group [group-name] string
[group-name] string
admin-state keyword
| Synopsis | Administrative state of RIPng neighbor interface group | |
| Context | configure service vprn string ripng group string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string ripng group string bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Introduced | 16.0.R4 | |
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string ripng group string check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Introduced | 16.0.R4 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string ripng group string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-policy reference
| Synopsis | Policies used to rule which routes are exported to RIP | |
| Context | configure service vprn string ripng group string export-policy reference | |
| Tree | export-policy | |
Description | This command specifies the export route policies used to determine which routes are exported to RIP. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
import-policy reference
| Synopsis | Policies to decide routes accepted from RIP neighbors | |
| Context | configure service vprn string ripng group string import-policy reference | |
| Tree | import-policy | |
Description | This command configures import route policies to determine which routes are accepted from RIP neighbors. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes in the message | |
| Context | configure service vprn string ripng group string message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIPng | |
| Context | configure service vprn string ripng group string metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
neighbor [interface-name] reference
[interface-name] reference
admin-state keyword
| Synopsis | Administrative state of the RIPng neighbor | |
| Context | configure service vprn string ripng group string neighbor reference admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R4 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Enable BFD to control the state of protocol adjacency | |
| Context | configure service vprn string ripng group string neighbor reference bfd-liveness boolean | |
| Tree | bfd-liveness | |
Description | When configured to true, this command enables BFD to control the state of the associated protocol adjacency. When configured to false, this command removes BFD from the associated protocol adjacency. | |
| Introduced | 16.0.R4 | |
Platforms | All |
check-zero boolean
| Synopsis | Enable checking of mandatory zero fields | |
| Context | configure service vprn string ripng group string neighbor reference check-zero boolean | |
| Tree | check-zero | |
Description | When configured to true, this command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting non-compliant RIP messages. When configured to false, this command disables the check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero. | |
| Introduced | 16.0.R4 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string ripng group string neighbor reference description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
export-policy reference
| Synopsis | Policies used to rule which routes are exported to RIP | |
| Context | configure service vprn string ripng group string neighbor reference export-policy reference | |
| Tree | export-policy | |
Description | This command specifies the export route policies used to determine which routes are exported to RIP. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
import-policy reference
| Synopsis | Policies to decide routes accepted from RIP neighbors | |
| Context | configure service vprn string ripng group string neighbor reference import-policy reference | |
| Tree | import-policy | |
Description | This command configures import route policies to determine which routes are accepted from RIP neighbors. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes in the message | |
| Context | configure service vprn string ripng group string neighbor reference message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIPng | |
| Context | configure service vprn string ripng group string neighbor reference metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string ripng group string neighbor reference preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string ripng group string neighbor reference split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false. this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Introduced | 16.0.R4 | |
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string ripng group string neighbor reference timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string ripng group string neighbor reference timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
unicast-address [address] string
| Synopsis | Add a list entry for unicast-address | |
| Context | configure service vprn string ripng group string neighbor reference unicast-address string | |
| Tree | unicast-address | |
| Introduced | 16.0.R4 | |
Platforms | All |
[address] string
| Synopsis | Unicast IPv6 address for the neighbor | |
| Context | configure service vprn string ripng group string neighbor reference unicast-address string | |
| Tree | unicast-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string ripng group string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string ripng group string split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false. this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Introduced | 16.0.R4 | |
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string ripng group string timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string ripng group string timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
import-policy reference
| Synopsis | Import policies to decide routes for routing table | |
| Context | configure service vprn string ripng import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R4 | |
Platforms | All |
message-size number
| Synopsis | Maximum number of routes in the message | |
| Context | configure service vprn string ripng message-size number | |
| Tree | message-size | |
| Range | 25 to 255 | |
| Default | 25 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
metric-in number
metric-out number
| Synopsis | Metric added to routes exported into RIPng | |
| Context | configure service vprn string ripng metric-out number | |
| Tree | metric-out | |
| Range | 1 to 16 | |
| Default | 1 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
preference number
| Synopsis | Route preference | |
| Context | configure service vprn string ripng preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 100 | |
| Introduced | 16.0.R4 | |
Platforms |
All |
receive keyword
send keyword
split-horizon boolean
| Synopsis | Enable split horizon and poison reverse | |
| Context | configure service vprn string ripng split-horizon boolean | |
| Tree | split-horizon | |
Description | When configured to true, this command enables the use of split horizon with poison reverse. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity). When configured to false, this command enables split horizon without poison reverse. This allows the routes to be re-advertised on interfaces other than the interface that learned the route, with the advertised metric equaling an increment of the metric-in value. | |
| Default | true | |
| Introduced | 16.0.R4 | |
|
Platforms | All |
timers
flush number
| Synopsis | RIP flush timer | |
| Context | configure service vprn string ripng timers flush number | |
| Tree | flush | |
Description | This command specifies the time a route is maintained in the RIP database after it has been declared invalid. When the timer expires, the route is flushed from the RIP database completely. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
timeout number
| Synopsis | RIP timeout timer | |
| Context | configure service vprn string ripng timers timeout number | |
| Tree | timeout | |
Description | This command specifies the RIP timeout timer. If a route is not updated by the time the timer expires, the route is declared invalid, but the route is maintained in the RIP database. | |
| Range | 1 to 1200 | |
| Units | seconds | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms |
All |
update number
router-id string
segment-routing-v6 [instance] number
| Synopsis | Enter the segment-routing-v6 list instance | |
| Context | configure service vprn string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[instance] number
| Synopsis | Segment routing IPv6 instance | |
| Context | configure service vprn string segment-routing-v6 number | |
| Tree | segment-routing-v6 | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
locator [locator-name] reference
| Synopsis | Enter the locator list instance | |
| Context | configure service vprn string segment-routing-v6 number locator reference | |
| Tree | locator | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | SRv6 locator name | |
| Context | configure service vprn string segment-routing-v6 number locator reference | |
| Tree | locator | |
Reference | configure router string segment-routing segment-routing-v6 locator string | |
Notes | This element is part of a list key. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
| Synopsis | Enter the function context | |
| Context | configure service vprn string segment-routing-v6 number locator reference function | |
| Tree | function | |
Description | Commands in this context configure the End SID functions for each SRH mode. The end-dt4 configuration and the end-dt46 configuration are mutually exclusive. The end-dt6 configuration and the end-dt46 configuration are mutually exclusive. | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
end-dt4
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number locator reference function end-dt4 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
end-dt46
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number locator reference function end-dt46 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
end-dt6
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number locator reference function end-dt6 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 21.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
micro-segment-locator [locator-name] reference
| Synopsis | Enter the micro-segment-locator list instance | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
[locator-name] reference
| Synopsis | Micro-segment SRv6 locator name | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference | |
| Tree | micro-segment-locator | |
Description | This command associates a pre-defined micro-segment SRv6 locator (defined in the configure router segment-routing segment-routing-v6 context) with the SRv6 instance in the service. The same micro-segment locator can be referenced in multiple BGP instances used by IPVPN or EVPN. | |
Reference | configure router string segment-routing segment-routing-v6 micro-segment-locator string | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
function
| Synopsis | Enter the function context | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function | |
| Tree | function | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udt4
| Synopsis | Enable the udt4 context | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt4 | |
| Tree | udt4 | |
Description | Commands in this context configure the SRv6 uDT4 behavior and the function value that is associated with the SRv6 instance in the service. When configured, decapsulation and table lookup for IPv4 prefixes occur in the VPRN service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt4 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udt46
| Synopsis | Enable the udt46 context | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt46 | |
| Tree | udt46 | |
Description | The commands in this context configure the SRv6 uDT46 behavior and the function value that is associated with the SRv6 instance in the service. When configured, decapsulation and table lookup for IPv4 and IPv6 prefixes occur in the VPRN service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt46 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
udt6
| Synopsis | Enable the udt6 context | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt6 | |
| Tree | udt6 | |
Description | Commands in this context configure the SRv6 uDT6 behavior and the function value that is associated with the SRv6 instance in the service. When configured, decapsulation and table lookup for IPv6 prefixes occur in the VPRN service. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
value number
| Synopsis | SRv6 function value | |
| Context | configure service vprn string segment-routing-v6 number micro-segment-locator reference function udt6 value number | |
| Tree | value | |
Description | This command assigns the optional static function value for the routes in the VPRN, VPLS, or Epipe instance. When unconfigured, the system allocates a value dynamically. | |
| Range | 1 to 1048575 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR |
selective-fib boolean
| Synopsis | Enable selective FIB | |
| Context | configure service vprn string selective-fib boolean | |
| Tree | selective-fib | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
service-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Service ID | |
| Context | configure service vprn string service-id number | |
| Tree | service-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | All | |
sfm-overload
| Synopsis | Enable the sfm-overload context | |
| Context | configure service vprn string sfm-overload | |
| Tree | sfm-overload | |
| Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS, VSR |
holdoff-time number
| Synopsis | Delay in detecting SFM failures and setting overload | |
| Context | configure service vprn string sfm-overload holdoff-time number | |
| Tree | holdoff-time | |
| Range | 1 to 600 | |
| Units | seconds | |
| Introduced | 16.0.R2 | |
Platforms |
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS, VSR |
sgt-qos
dot1p
application [dot1p-app-name] keyword
| Synopsis | Enter the application list instance | |
| Context | configure service vprn string sgt-qos dot1p application keyword | |
| Tree | application | |
| Introduced | 16.0.R1 | |
Platforms | All |
[dot1p-app-name] keyword
| Synopsis | Dot1p application ID that generates control traffic | |
| Context | configure service vprn string sgt-qos dot1p application keyword | |
| Tree | application | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dot1p (keyword | number)
dscp
application [dscp-app-name] keyword
| Synopsis | Enter the application list instance | |
| Context | configure service vprn string sgt-qos dscp application keyword | |
| Tree | application | |
Description | Commands in this context configure DSCP remarking for self-generated application traffic. All packets generated by the configured application instance use the value configured for the DSCP name or value. The instance can be Base, router, VPRN, or management. The system uses the DSCP value configured in this instance to:
| |
| Introduced | 16.0.R1 | |
Platforms | All |
[dscp-app-name] keyword
| Synopsis | DSCP application ID that generates control traffic | |
| Context | configure service vprn string sgt-qos dscp application keyword | |
| Tree | application | |
Description | This command configures the DSCP application ID that generates control traffic. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp (keyword | number)
dscp-map [dscp-name] keyword
[dscp-name] keyword
fc keyword
snmp
access boolean
community [community-string] string
| Synopsis | Enter the community list instance | |
| Context | configure service vprn string snmp community string | |
| Tree | community | |
Description | Commands in this context set the SNMP community names to be used with the associated VPRN instance. These VPRN community names are used to associate SNMP v1/v2c requests with a particular VPRN context and to return a reply that contains VPRN-specific data or limit SNMP access to data in a specific VPRN instance. VPRN SNMP communities configured with an access permission of 'r' are automatically associated with the default access group "snmp-vprn-ro” and the “vprn-view” view (read only). VPRN SNMP communities configured with an access permission of 'rw' are automatically associated with the default access group "snmp-vprn” and the “vprn-view” view (read/write). The community in an SNMP v1/v2 request determines the SNMP context (that is, the VPRN number for accessing SNMP tables) and not the VPRN of the incoming interface on which the request was received. For example, when an SNMP request arrives on VPRN 5 interface “ringo” with a destination IP address equal to the “ringo” interface, but the community in the SNMP request is the community configured against VPRN 101, the SNMP request is processed using the VPRN 101 context. (the response contains information about VPRN 101). Nokia recommends avoiding the use of a simple series of VPRN SNMP community values that are similar to each other (for example, avoid my-vprncomm-1, my-vprn-comm-2, and so on). | |
| Introduced | 16.0.R5 | |
Platforms | All |
[community-string] string
access-permissions keyword
| Synopsis | Access permissions to MIB objects | |
| Context | configure service vprn string snmp community string access-permissions keyword | |
| Tree | access-permissions | |
| Options | ||
Notes |
This element is mandatory. | |
| Introduced | 16.0.R5 | |
Platforms |
All |
source-access-list reference
| Synopsis | List name used to validate the source IP address | |
| Context | configure service vprn string snmp community string source-access-list reference | |
| Tree | source-access-list | |
Description | This command specifies the SNMP source access list to use with the SNMP community. The source access list is used to validate the source IP address of all received SNMP requests that use the community. | |
Reference | configure system security snmp source-access-list string | |
| Introduced | 16.0.R5 | |
Platforms | All |
version keyword
source-address
| Synopsis | Enter the source-address context | |
| Context | configure service vprn string source-address | |
| Tree | source-address | |
Description | Commands in this context configure the source address and application to use in all unsolicited packets. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv4 [application] keyword
| Synopsis | Enter the ipv4 list instance | |
| Context | configure service vprn string source-address ipv4 keyword | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[application] keyword
| Synopsis | Application that uses the source IP address | |
| Context | configure service vprn string source-address ipv4 keyword | |
| Tree | ipv4 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Source IPv4 address | |
| Context | configure service vprn string source-address ipv4 keyword address string | |
| Tree | address | |
Notes | The following elements are part of a mandatory choice: address or interface-name. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP interface name | |
| Context | configure service vprn string source-address ipv4 keyword interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a mandatory choice: address or interface-name. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
ipv6 [application] keyword
| Synopsis | Enter the ipv6 list instance | |
| Context | configure service vprn string source-address ipv6 keyword | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[application] keyword
| Synopsis | Application that uses the source IP address | |
| Context | configure service vprn string source-address ipv6 keyword | |
| Tree | ipv6 | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
address string
spoke-sdp [sdp-bind-id] string
[sdp-bind-id] string
description string
| Synopsis | Text description | |
| Context | configure service vprn string spoke-sdp string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
static-routes
| Synopsis | Enter the static-routes context | |
| Context | configure service vprn string static-routes | |
| Tree | static-routes | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-down
| Synopsis | Enable the hold-down context | |
| Context | configure service vprn string static-routes hold-down | |
| Tree | hold-down | |
| Introduced | 16.0.R1 | |
Platforms | All |
initial number
max-value number
multiplier number
| Synopsis | Value by which the previous hold-down time is multiplied to calculate the new one | |
| Context | configure service vprn string static-routes hold-down multiplier number | |
| Tree | multiplier | |
| Range | 1 to 10 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
route [ip-prefix] (ipv4-prefix | ipv6-prefix) route-type keyword
| Synopsis | Enter the route list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword | |
| Tree | route | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] (ipv4-prefix | ipv6-prefix)
| Synopsis | IP prefix and prefix length for the static routes | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword | |
| Tree | route | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
route-type keyword
| Synopsis | Static route type | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword | |
| Tree | route | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
backup-tag number
| Synopsis | Static route backup tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword backup-tag number | |
| Tree | backup-tag | |
Description | This command associates a 4-byte backup route tag with the static route when the backup next-hop functionality is activated. The tag value is used in route policies to control distribution of the static route into other protocols when the backup next-hop function is activated for the associated static route. The tag specified at this level of the static route causes the tag values that are configured under the next-hop, black-hole, and indirect contexts of the static route to be ignored. | |
| Range | 1 to 4294967295 | |
| Introduced | 21.2.R1 | |
Platforms | All |
blackhole
| Synopsis | Enable the blackhole context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole | |
| Tree | blackhole | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
generate-icmp boolean
| Synopsis | Send ICMP unreachable messages when received packets match a static route with black-hole next-hop | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole generate-icmp boolean | |
| Tree | generate-icmp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-list
| Synopsis | Enter the prefix-list context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole prefix-list | |
| Tree | prefix-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
flag keyword
| Synopsis | Static route match condition from prefix list | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole prefix-list flag keyword | |
| Tree | flag | |
| Options | ||
| Default | any | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
name reference
| Synopsis | Prefix list name | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole prefix-list name reference | |
| Tree | name | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword blackhole tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Max. Instances | 12 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | All |
grt
| Synopsis | Enable the grt context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword grt | |
| Tree | grt | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword grt admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword grt description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword grt metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword grt preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
indirect [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the indirect list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | indirect | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Next-hop IP address used to reach the destination | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | indirect | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpe-check [address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the cpe-check list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
Description | When configured, this command enables the Customer Premises Equipment (CPE) check feature and specifies the IP address of the target CPE device. This option initiates a background ICMP ping test to the configured target IP address. The IP address can either be an IPv4 address for IPv4 static routes or an IPv6 address for IPv6 static routes. To avoid possible circular references, the target IP address cannot exist in the same subnet as the static route subnet. This command is mutually exclusive with BFD support on a specific static route. Note: A node that is sourcing CPE-check packets waits an additional full interval before taking action, which gives the CPE time to respond. For example, with a drop-count of 3 and an interval of 1s, three CPE-check packets are sent out and the node waits for the duration of another interval before acting on the loss. Failure declaration may take extra time depending on the load, interval, and other factors. In line with multitasking, multi-priority operating principles of the node, and the relative priority of cpe-ping, the node paces these minor events. | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the target CPE device | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
destination-class number
| Synopsis | Destination class for this static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) destination-class number | |
| Tree | destination-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-list
| Synopsis | Enter the prefix-list context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) prefix-list | |
| Tree | prefix-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
flag keyword
| Synopsis | Static route match condition from prefix list | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) prefix-list flag keyword | |
| Tree | flag | |
| Options | ||
| Default | any | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
name reference
| Synopsis | Prefix list name | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) prefix-list name reference | |
| Tree | name | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
forwarding-class keyword
| Synopsis | Forwarding class associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) qos forwarding-class keyword | |
| Tree | forwarding-class | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority keyword
| Synopsis | Static route priority | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) qos priority keyword | |
| Tree | priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
source-class number
| Synopsis | Source class for the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) source-class number | |
| Tree | source-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword indirect (ipv4-address-no-zone | ipv6-address-no-zone) tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
interface [interface-name] string
| Synopsis | Enter the interface list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string | |
| Tree | interface | |
| Introduced | 16.0.R1 | |
Platforms | All |
[interface-name] string
| Synopsis | Router interface name. | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string | |
| Tree | interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpe-check [address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the cpe-check list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
Description | When configured, this command enables the Customer Premises Equipment (CPE) check feature and specifies the IP address of the target CPE device. This option initiates a background ICMP ping test to the configured target IP address. The IP address can either be an IPv4 address for IPv4 static routes or an IPv6 address for IPv6 static routes. To avoid possible circular references, the target IP address cannot exist in the same subnet as the static route subnet. This command is mutually exclusive with BFD support on a specific static route. Note: A node that is sourcing CPE-check packets waits an additional full interval before taking action, which gives the CPE time to respond. For example, with a drop-count of 3 and an interval of 1s, three CPE-check packets are sent out and the node waits for the duration of another interval before acting on the loss. Failure declaration may take extra time depending on the load, interval, and other factors. In line with multitasking, multi-priority operating principles of the node, and the relative priority of cpe-ping, the node paces these minor events. | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the target CPE device | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
destination-class number
| Synopsis | Destination class for this static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string destination-class number | |
| Tree | destination-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
load-balancing-weight number
| Synopsis | Load-balancing weight for all of the ECMP next hops | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string load-balancing-weight number | |
| Tree | load-balancing-weight | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-list
| Synopsis | Enter the prefix-list context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string prefix-list | |
| Tree | prefix-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
flag keyword
| Synopsis | Static route match condition from prefix list | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string prefix-list flag keyword | |
| Tree | flag | |
| Options | ||
| Default | any | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
name reference
| Synopsis | Prefix list name | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string prefix-list name reference | |
| Tree | name | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
forwarding-class keyword
| Synopsis | Forwarding class associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string qos forwarding-class keyword | |
| Tree | forwarding-class | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority keyword
| Synopsis | Static route priority | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string qos priority keyword | |
| Tree | priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
source-class number
| Synopsis | Source class for the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string source-class number | |
| Tree | source-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword interface string tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipsec-tunnel [ipsec-tunnel-name] string
| Synopsis | Enter the ipsec-tunnel list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ipsec-tunnel-name] string
| Synopsis | Ipsec tunnel name. | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string | |
| Tree | ipsec-tunnel | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
destination-class number
| Synopsis | Destination class for this static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string destination-class number | |
| Tree | destination-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
forwarding-class keyword
| Synopsis | Forwarding class associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string qos forwarding-class keyword | |
| Tree | forwarding-class | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority keyword
| Synopsis | Static route priority | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string qos priority keyword | |
| Tree | priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
source-class number
| Synopsis | Source class for the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string source-class number | |
| Tree | source-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword ipsec-tunnel string tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
next-hop [ip-address] (ipv4-address-with-zone | ipv6-address-with-zone)
| Synopsis | Enter the next-hop list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) | |
| Tree | next-hop | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-address] (ipv4-address-with-zone | ipv6-address-with-zone)
| Synopsis | Next-hop IP address used to reach the destination | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) | |
| Tree | next-hop | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the static route operation | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
backup-next-hop
| Synopsis | Enter the backup-next-hop context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) backup-next-hop | |
| Tree | backup-next-hop | |
Description | Commands in this context configure static route entry fast failover. | |
| Introduced | 21.2.R1 | |
Platforms | All |
address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Backup next-hop IP address | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) backup-next-hop address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | address | |
Description | This command specifies the backup IP forwarding address that is used for static route Fast ReRoute (FRR). The configured address, if reachable, acts as pre-installed backup forwarding information that can be used when the primary IP next-hop suddenly fails. The configured backup next-hop IP address can be directly or indirectly connected (using an IGP or tunnel) to the node. The backup next-hop forwarding information or the Next-hop Label Forwarding Entry (NHLFE) tunnel forwarding information from the IP Routing Table Manager (RTM) is used to preconfigure an IP fast-reroute backup path. One backup next-hop address can protect a single primary static route entry next-hop address without ECMP and it is only activated when the primary next-hop has no active ECMP. The configured IP address can be either on the network or the access side. | |
| Introduced | 21.2.R1 | |
Platforms | All |
bfd-liveness boolean
| Synopsis | Use Bidirectional Forwarding Detection on this static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) bfd-liveness boolean | |
| Tree | bfd-liveness | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
community string
| Synopsis | Community ID associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) community string | |
| Tree | community | |
| String Length | 1 to 72 | |
| Introduced | 16.0.R1 | |
Platforms | All |
cpe-check [address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the cpe-check list instance | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | IP address of the target CPE device | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | cpe-check | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | All |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) cpe-check (ipv4-address-no-zone | ipv6-address-no-zone) padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 16.0.R1 | |
Platforms | All |
description string
| Synopsis | Text description | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
destination-class number
| Synopsis | Destination class for this static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) destination-class number | |
| Tree | destination-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
load-balancing-weight number
| Synopsis | Load-balancing weight for all of the ECMP next hops | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) load-balancing-weight number | |
| Tree | load-balancing-weight | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
metric number
| Synopsis | Static route metric | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) metric number | |
| Tree | metric | |
| Range | 0 to 65535 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
preference number
| Synopsis | Priority of this static route over the routes from different sources | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) preference number | |
| Tree | preference | |
| Range | 1 to 255 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
prefix-list
| Synopsis | Enter the prefix-list context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) prefix-list | |
| Tree | prefix-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
flag keyword
| Synopsis | Static route match condition from prefix list | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) prefix-list flag keyword | |
| Tree | flag | |
| Options | ||
| Default | any | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
name reference
| Synopsis | Prefix list name | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) prefix-list name reference | |
| Tree | name | |
Reference | configure policy-options prefix-list string | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
forwarding-class keyword
| Synopsis | Forwarding class associated with the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) qos forwarding-class keyword | |
| Tree | forwarding-class | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
priority keyword
| Synopsis | Static route priority | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) qos priority keyword | |
| Tree | priority | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
source-class number
| Synopsis | Source class for the static route | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) source-class number | |
| Tree | source-class | |
| Range | 1 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
validate-next-hop boolean
| Synopsis | Track the state of the next hop in the IPv4 ARP Cache or the IPv6 Neighbor Cache | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword next-hop (ipv4-address-with-zone | ipv6-address-with-zone) validate-next-hop boolean | |
| Tree | validate-next-hop | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tag number
| Synopsis | Static route tag | |
| Context | configure service vprn string static-routes route (ipv4-prefix | ipv6-prefix) route-type keyword tag number | |
| Tree | tag | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | All |
subscriber-interface [interface-name] string
| Synopsis | Enter the subscriber-interface list instance | |
| Context | configure service vprn string subscriber-interface string | |
| Tree | subscriber-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[interface-name] string
| Synopsis | Subscriber interface name | |
| Context | configure service vprn string subscriber-interface string | |
| Tree | subscriber-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the subscriber interface | |
| Context | configure service vprn string subscriber-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
fwd-service reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Configure the forwarding service. | |
| Context | configure service vprn string subscriber-interface string fwd-service reference | |
| Tree | fwd-service | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
fwd-subscriber-interface reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Forwarding subscriber interface name | |
| Context | configure service vprn string subscriber-interface string fwd-subscriber-interface reference | |
| Tree | fwd-subscriber-interface | |
Reference | configure service vprn string subscriber-interface string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
group-interface [group-interface-name] string
| Synopsis | Enter the group-interface list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string | |
| Tree | group-interface | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[group-interface-name] string
| Synopsis | Group interface name | |
| Context | configure service vprn string subscriber-interface string group-interface string | |
| Tree | group-interface | |
| String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the interface | |
| Context | configure service vprn string subscriber-interface string group-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bonding-parameters
| Synopsis | Enter the bonding-parameters context | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters | |
| Tree | bonding-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of ESM connection bonding | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
connection [connection-index] number
| Synopsis | Enter the connection list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters connection number | |
| Tree | connection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[connection-index] number
| Synopsis | Bonding connection index | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters connection number | |
| Tree | connection | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
service string
| Synopsis | Connection service | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters connection number service string | |
| Tree | service | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fpe reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | FPE that provisions bonding functionality | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters fpe reference | |
| Tree | fpe | |
Reference | configure fwd-path-ext fpe number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
multicast
| Synopsis | Enter the multicast context | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters multicast | |
| Tree | multicast | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
connection (number | keyword)
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Multicast connection | |
| Context | configure service vprn string subscriber-interface string group-interface string bonding-parameters multicast connection (number | keyword) | |
| Tree | connection | |
| Range | 1 to 2 | |
| Options | ||
| Default | use-incoming | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
brg
| Synopsis | Enter the brg context | |
| Context | configure service vprn string subscriber-interface string group-interface string brg | |
| Tree | brg | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BRG | |
| Context | configure service vprn string subscriber-interface string group-interface string brg admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
authenticated-brg-only boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow BRGs that have been pre-authenticated | |
| Context | configure service vprn string subscriber-interface string group-interface string brg authenticated-brg-only boolean | |
| Tree | authenticated-brg-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
default-brg-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default BRG profile for new BRGs | |
| Context | configure service vprn string subscriber-interface string group-interface string brg default-brg-profile reference | |
| Tree | default-brg-profile | |
Reference | configure subscriber-mgmt vrgw brg-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
cflowd-parameters
| Synopsis | Enter the cflowd-parameters context | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters | |
| Tree | cflowd-parameters | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sampling [sampling-type] keyword
| Synopsis | Enter the sampling list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sampling-type] keyword
| Synopsis | Traffic sampling type | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters sampling keyword | |
| Tree | sampling | |
Description | This command configures the type of traffic to be sampled on the associated IP interface. | |
| Options | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
direction keyword
| Synopsis | Direction of traffic for cflowd sampling | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters sampling keyword direction keyword | |
| Tree | direction | |
Description | This command configures the direction in which sampling occurs on the associated IP interfaces. | |
| Options | ||
| Default | ingress-only | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sample-profile (keyword | number)
| Synopsis | Sample profile ID | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters sampling keyword sample-profile (keyword | number) | |
| Tree | sample-profile | |
Description | This command defines the sampling rate profile associated with this interface. | |
| Max. Range | 0 to 4294967295 | |
| Options | ||
| Introduced | 19.5.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Type of cflowd analysis | |
| Context | configure service vprn string subscriber-interface string group-interface string cflowd-parameters sampling keyword type keyword | |
| Tree | type | |
Description | This command configures the cflowd sampling type on the associated IP interface. | |
| Options | ||
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
data-trigger
| Synopsis | Enter the data-trigger context | |
| Context | configure service vprn string subscriber-interface string group-interface string data-trigger | |
| Tree | data-trigger | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of data-triggered host creation | |
| Context | configure service vprn string subscriber-interface string group-interface string data-trigger admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-routes-track-srrp
| Synopsis | Enable the dynamic-routes-track-srrp context | |
| Context | configure service vprn string subscriber-interface string group-interface string dynamic-routes-track-srrp | |
| Tree | dynamic-routes-track-srrp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Time before route state updated after SRRP transition | |
| Context | configure service vprn string subscriber-interface string group-interface string dynamic-routes-track-srrp hold-time number | |
| Tree | hold-time | |
| Range | 1 to 50 | |
| Units | deciseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gtp-parameters
| Synopsis | Enter the gtp-parameters context | |
| Context | configure service vprn string subscriber-interface string group-interface string gtp-parameters | |
| Tree | gtp-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of GTP access | |
| Context | configure service vprn string subscriber-interface string group-interface string gtp-parameters admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
fpe reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | PE that provisions the GTP user interface | |
| Context | configure service vprn string subscriber-interface string group-interface string gtp-parameters fpe reference | |
| Tree | fpe | |
Reference | configure fwd-path-ext fpe number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
gx-policy reference
| Synopsis | Diameter application policy | |
| Context | configure service vprn string subscriber-interface string group-interface string gx-policy reference | |
| Tree | gx-policy | |
Reference | configure subscriber-mgmt diameter-gx-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service vprn string subscriber-interface string group-interface string ingress | |
| Tree | ingress | |
| Introduced | 19.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-accounting reference
| Synopsis | Ingress policy accounting template name | |
| Context | configure service vprn string subscriber-interface string group-interface string ingress policy-accounting reference | |
| Tree | policy-accounting | |
Reference | configure routing-options policy-accounting policy-acct-template string | |
| Introduced | 19.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s |
ingress-stats boolean
| Synopsis | Collect ingress interface statistics | |
| Context | configure service vprn string subscriber-interface string group-interface string ingress-stats boolean | |
| Tree | ingress-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-mtu number
| Synopsis | Interface IP MTU | |
| Context | configure service vprn string subscriber-interface string group-interface string ip-mtu number | |
| Tree | ip-mtu | |
| Range | 512 to 9786 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-linking
| Synopsis | Enter the ipoe-linking context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-linking | |
| Tree | ipoe-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IPoE host linking | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-linking admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gratuitous-router-advertisement boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Send unsolicited router advertisement after DHCP setup | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-linking gratuitous-router-advertisement boolean | |
| Tree | gratuitous-router-advertisement | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
shared-circuit-id boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable circuit ID in DHCPv4 Option82 to validate DHCPv6 | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-linking shared-circuit-id boolean | |
| Tree | shared-circuit-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ipoe-session
| Synopsis | Enter the ipoe-session context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session | |
| Tree | ipoe-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of IPoE session management | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-auth
| Synopsis | Enter the force-auth context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session force-auth | |
| Tree | force-auth | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cid-change boolean
| Synopsis | Ignore min-auth-interval when circuit ID changed | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session force-auth cid-change boolean | |
| Tree | cid-change | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rid-change boolean
| Synopsis | Ignore min-auth-interval when remote ID changed | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session force-auth rid-change boolean | |
| Tree | rid-change | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPoE Session policy to be used for new sessions | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session ipoe-session-policy reference | |
| Tree | ipoe-session-policy | |
Reference | configure subscriber-mgmt ipoe-session-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
min-auth-interval (keyword | number)
| Synopsis | Minimum time between two authentication attempts | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session min-auth-interval (keyword | number) | |
| Tree | min-auth-interval | |
| Range | 1 to 32000000 | |
| Units | seconds | |
| Options | ||
| Default | infinite | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-session-timeout keyword
| Synopsis | Session timeout attribute to be interpreted | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session radius-session-timeout keyword | |
| Tree | radius-session-timeout | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-session-limit number
| Synopsis | Maximum number of sessions per SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session sap-session-limit number | |
| Tree | sap-session-limit | |
| Range | 1 to 131071 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum number of sessions on this group interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session session-limit number | |
| Tree | session-limit | |
| Range | 1 to 500000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stateless-redundancy boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Remove IPoE sessions when the system becomes stand-by in a stateless multi-chassis redundancy setup | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session stateless-redundancy boolean | |
| Tree | stateless-redundancy | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for IPoE session authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string ipoe-session user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arp-host
| Synopsis | Enter the arp-host context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 arp-host | |
| Tree | arp-host | |
| Introduced | 16.0.R6 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of ARP hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 arp-host admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-limit number
| Synopsis | Maximum number of ARP hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 arp-host host-limit number | |
| Tree | host-limit | |
| Range | 1 to 524287 | |
| Introduced | 16.0.R6 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-auth-interval number
| Synopsis | Minimum authentication interval | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 arp-host min-auth-interval number | |
| Tree | min-auth-interval | |
| Range | 1 to 6000 | |
| Units | minutes | |
| Default | 15 | |
| Introduced | 16.0.R6 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-host-limit number
| Synopsis | Maximum number of ARP hosts per SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 arp-host sap-host-limit number | |
| Tree | sap-host-limit | |
| Range | 1 to 131071 | |
| Default | 1 | |
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd
| Synopsis | Enter the bfd context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd | |
| Tree | bfd | |
Description | Commands in this context configure the attributes of bidirectional forwarding detection (BFD) sessions that control the state of ESM dynamic BGP peers. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
dhcp
| Synopsis | Enter the dhcp context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp | |
| Tree | dhcp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Enable PPPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter reference
| Synopsis | DHCP filter ID for the group interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp filter reference | |
| Tree | filter | |
Reference | configure filter dhcp-filter number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
l2-header
| Synopsis | Enable the l2-header context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp lease-populate l2-header | |
| Tree | l2-header | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | IEEE address used in anti-spoofing entries for the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp lease-populate l2-header mac string | |
| Tree | mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 1 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
match-circuit-id boolean
| Synopsis | Enable Option 82 circuit ID on relayed DHCP packets | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp match-circuit-id boolean | |
| Tree | match-circuit-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
offer-selection
| Synopsis | Enter the offer-selection context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection | |
| Tree | offer-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages from the specified MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Offer selection | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection client-mac mac-address keyword | |
| Tree | mac-address | |
Description | This command specifies the client MAC addresses for which the Discover delay applies. | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages. The delay is applied to all DHCP Discover messages for which no per DHCP server or per client MAC delay is configured. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv4-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv4-address] string
| Synopsis | IP address of the DHCP server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp offer-selection server string discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay DHCP Discover messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
action keyword
| Synopsis | Action to take with received DHCP Option 82 | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 action keyword | |
| Tree | action | |
| Options | ||
| Default | keep | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
circuit-id
| Synopsis | Enter the circuit-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id | |
| Tree | circuit-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-tuple
| Synopsis | Use the ASCII-encoded tuple for the circuit ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ifindex
| Synopsis | Use the interface index for the circuit ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id ifindex | |
| Tree | ifindex | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
none
| Synopsis | Do not include the circuit ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id none | |
| Tree | none | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use the SAP ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vlan-ascii-tuple
| Synopsis | Include the VLAN ID and dot1p bits in the ASCII tuple | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 circuit-id vlan-ascii-tuple | |
| Tree | vlan-ascii-tuple | |
Description | When configured, the router includes the VLAN ID and dot1p bits with the ASCII-tuple information. This only occurs on dot1q and QinQ-encapsulated ports. When the Option 82 bits are stripped, dot1p bits are copied to the Ethernet header of the outgoing packet. When unconfigured, the router leaves the circuit ID sub-option of the DHCP packet empty. | |
Notes | The following elements are part of a choice: ascii-tuple, ifindex, none, sap-id, or vlan-ascii-tuple. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-id
| Synopsis | Enter the remote-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id | |
| Tree | remote-id | |
Description | Commands in this context configure the remote IP sub-option of the DHCP packet with the identity of the remote host end (typically the DHCP client). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-string string
| Synopsis | User-defined ASCII string for the remote ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id ascii-string string | |
| Tree | ascii-string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac
| Synopsis | Use the MAC address for the remote ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id mac | |
| Tree | mac | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
none
| Synopsis | Do not include the remote ID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 remote-id none | |
| Tree | none | |
Notes | The following elements are part of a choice: ascii-string, mac, or none. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pool-name boolean
| Synopsis | Send the pool name in the VSO | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option pool-name boolean | |
| Tree | pool-name | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id boolean
| Synopsis | Send SAP ID in the sub-option of the DHCP relay packet | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option sap-id boolean | |
| Tree | sap-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | User-defined ASCII string for the VSO | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option string string | |
| Tree | string | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
system-id boolean
| Synopsis | Send the system ID in the VSO | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp option-82 vendor-specific-option system-id boolean | |
| Tree | system-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
emulated-server string
| Synopsis | IP address used as DHCP server address in SAP context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | DHCP lease time | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Description | This command associates a Python policy name with the interface. | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-include-gi-address boolean
| Synopsis | Include gateway IP address in DHCP Release messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | IP addresses for DHCP server requests | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp server string | |
| Tree | server | |
Description | This command configures a list of servers that this interface forwards requests to. The operator can enter the list of servers as either IP addresses or fully qualified domain names. The operator must specify at least one server specified for DHCP relay to work. If there are multiple servers, the system forwards the request to all the servers in the list. | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
trusted boolean
| Synopsis | Relay untrusted packets | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp trusted boolean | |
| Tree | trusted | |
Description | When configured to true, the router enables the trusted mode on the interface. When enabled, the relay agent changes the existing GI address (of the request) to the ingress interface, and forwards the request. A DHCP request that contains a GI address of 0.0.0.0 and an Option 82 field in the packet is discarded unless it arrives on a trusted circuit. This behavior only applies if the Relay Agent Information Option action is to keep the existing information. When the Option 82 field is replaced by the relay agent, the original Option 82 information is lost, and there is no reason to enable the trusted option. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 dhcp user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
icmp
| Synopsis | Enter the icmp context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp | |
| Tree | icmp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mask-reply boolean
| Synopsis | Allow responses to ICMP mask requests on the interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp mask-reply boolean | |
| Tree | mask-reply | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
param-problem
| Synopsis | Enter the param-problem context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp param-problem | |
| Tree | param-problem | |
Description | Commands in this context specify the settings for ICMP Parameter Problem messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sent Parameter Problem messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp param-problem admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of Parameter Problem messages to send | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp param-problem number number | |
| Tree | number | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit number of Parameter Problem messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp param-problem seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
redirects
| Synopsis | Enter the redirects context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp redirects | |
| Tree | redirects | |
Description | Commands in this context configure the settings for ICMP redirect messages generated by the interface. The system sends ICMP redirect messages to alert the sending node that a more optimal route is available on another router on the same subnetwork. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending ICMP redirect messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp redirects admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of ICMP redirect messages to send | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp redirects number number | |
| Tree | number | |
| Range | 10 to 1000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit the number of ICMP redirect messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp redirects seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ttl-expired
| Synopsis | Enter the ttl-expired context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp ttl-expired | |
| Tree | ttl-expired | |
Description | Commands in this context configure the settings for ICMP TTL expired messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending TTL expired messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp ttl-expired admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of TTL expired messages to send | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp ttl-expired number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time used to limit the number of TTL expired messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp ttl-expired seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-matching-address boolean
| Synopsis | Use the subscriber interface address as source address | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp ttl-expired use-matching-address boolean | |
| Tree | use-matching-address | |
Description | When configured to true, the system uses a matching subscriber interface address as the source address of the ICMP TTL expired message. For matching to occur, the source address of the offending packet must be in the same subnet of the subscriber interface address. When configured to false, the system uses the first configured address. | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
unreachables
| Synopsis | Enter the unreachables context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp unreachables | |
| Tree | unreachables | |
Description | Commands in this context specify the settings for ICMP host and network destination unreachable messages generated by the interface. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of sending unreachable messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp unreachables admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
number number
| Synopsis | Maximum number of unreachable messages to send | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp unreachables number number | |
| Tree | number | |
| Range | 10 to 2000 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
| Synopsis | Time to limit the number of ICMP unreachable messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 icmp unreachables seconds number | |
| Tree | seconds | |
| Range | 1 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ignore-df-bit boolean
| Synopsis | Ignore DF bit in the IPv4 header when fragmenting | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 ignore-df-bit boolean | |
| Tree | ignore-df-bit | |
Description | When configured to true, fragmentation is applied according to the applicable egress MTU instead of the DF bit for frames egressing the WLAN-GW group. The DF bit is reset for frames that are fragmented. When configured to false, the router fragments a packet larger than the MTU if the DF bit is set to 0 and drops the packet if the DF bit is set to 1. | |
| Default | false | |
| Introduced | 20.5.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-proxy-arp boolean
| Synopsis | Enable local proxy ARP on interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery local-proxy-arp boolean | |
| Tree | local-proxy-arp | |
Description | When configured to true, the router enables local proxy ARP on the interface. When configured to false, the router does not respond to ARP requests for addresses on the same subnet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
populate boolean
| Synopsis | Allow population of static and dynamic hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery populate boolean | |
| Tree | populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-arp-policy reference
| Synopsis | Proxy ARP policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery proxy-arp-policy reference | |
| Tree | proxy-arp-policy | |
Reference | configure policy-options policy-statement string | |
| Max. Instances | 5 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-proxy-arp boolean
| Synopsis | Enable remote proxy ARP on the interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery remote-proxy-arp boolean | |
| Tree | remote-proxy-arp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Timeout for an ARP entry learned on the interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 neighbor-discovery timeout number | |
| Tree | timeout | |
| Range | 0 to 65535 | |
| Units | seconds | |
| Default | 14400 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos-route-lookup keyword
| Synopsis | QoS route lookup | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mode keyword
| Synopsis | Unicast RPF check mode | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv4 urpf-check mode keyword | |
| Tree | mode | |
| Options | ||
| Default | strict | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enable the ipv6 context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-multiple-wan-addresses boolean
| Synopsis | Allow multiple WAN addresses | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 allow-multiple-wan-addresses boolean | |
| Tree | allow-multiple-wan-addresses | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-reply
| Synopsis | Enter the auto-reply context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 auto-reply | |
| Tree | auto-reply | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-solicitation boolean
| Synopsis | Enable auto-reply for NS | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 auto-reply neighbor-solicitation boolean | |
| Tree | neighbor-solicitation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicitation boolean
| Synopsis | Enable auto-reply for RS | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 auto-reply router-solicitation boolean | |
| Tree | router-solicitation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd
| Synopsis | Enter the bfd context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd | |
| Tree | bfd | |
Description | Commands in this context configure the attributes of bidirectional forwarding detection (BFD) sessions that control the state of ESM dynamic BGP peers. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
dhcp6
| Synopsis | Enter the dhcp6 context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 | |
| Tree | dhcp6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter reference
| Synopsis | DHCPv6 filter | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 filter reference | |
| Tree | filter | |
Reference | configure filter dhcp6-filter number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option
| Synopsis | Enter the option context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option | |
| Tree | option | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interface-id
| Synopsis | Enter the interface-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id | |
| Tree | interface-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ascii-tuple
| Synopsis | Use ASCII-encoded concatenated tuple | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id ascii-tuple | |
| Tree | ascii-tuple | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
if-index
| Synopsis | Use interface index in the DHCPv6 relay packet | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id if-index | |
| Tree | if-index | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use SAP ID in interface ID option in relay packet | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | String for interface ID option in DHCPv6 relay packet | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option interface-id string string | |
| Tree | string | |
| String Length | 1 to 80 | |
Notes | The following elements are part of a choice: ascii-tuple, if-index, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
remote-id boolean
| Synopsis | Send remote ID option in the DHCPv6 relay packet | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 option remote-id boolean | |
| Tree | remote-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
override-slaac boolean
| Synopsis | Allow WAN address offered by DHCP to overwrite the WAN address acquired from SLAAC | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 override-slaac boolean | |
| Tree | override-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pd-managed-route
| Synopsis | Enable the pd-managed-route context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 pd-managed-route | |
| Tree | pd-managed-route | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
next-hop keyword
| Synopsis | Next hop type | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 pd-managed-route next-hop keyword | |
| Tree | next-hop | |
| Options | ||
| Default | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for prefix to remain preferred on this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rebind-timer number
| Synopsis | Rebind timer (T2) for this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server rebind-timer number | |
| Tree | rebind-timer | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-timer number
| Synopsis | Renew timer (T1) | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server renew-timer number | |
| Tree | renew-timer | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server-id
| Synopsis | Enter the server-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id | |
| Tree | server-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-ascii string
| Synopsis | Vendor-assigned ID based on Enterprise Number (DUID-EN) | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-en-ascii string | |
| Tree | duid-en-ascii | |
| String Length | 1 to 58 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-hex string
| Synopsis | DUID system ID in hexadecimal format | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-en-hex string | |
| Tree | duid-en-hex | |
| String Length | 1 to 118 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-ll
| Synopsis | Use link-layer address (DUID-LL) as DUID | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server server-id duid-ll | |
| Tree | duid-ll | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for prefix to remain valid on this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 proxy-server valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay
| Synopsis | Enter the relay context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay | |
| Tree | relay | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
advertise-selection
| Synopsis | Enter the advertise-selection context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection | |
| Tree | advertise-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Advertise selection | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac mac-address keyword | |
| Tree | mac-address | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection client-mac solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent from the designated client MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv6-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-address] string
| Synopsis | IP address of the DHCPv6 server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection server string solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay advertise-selection solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages. The delay is applied to DHCPv6 Solicit messages for which no overriding value is configured in the server instance or the client-mac context. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow the PPP application to use DHCP relay functionality | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-split
| Synopsis | Enter the lease-split context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split | |
| Tree | lease-split | |
Description | Commands in this context configure DHCPv6 lease split. DHCPv6 lease split is active when administratively enabled and for all IA_NA and IA_PD options in the transaction, the configured lease split valid lifetime (short lease time) is less than or equal to one of the following:
| |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 lease split | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | DHCPv6 lease split valid lifetime (short lease time) | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay lease-split valid-lifetime number | |
| Tree | valid-lifetime | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | Link address for the DHCPv6 relay messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | DHCP6 server(s) to which the DHCP6 requests are forwarded | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-address string
| Synopsis | Source IPv6 address for the DHCPv6 relay messages | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
snooping
| Synopsis | Enter the snooping context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 snooping | |
| Tree | snooping | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 snooping | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 snooping admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
user-db reference
| Synopsis | Local user database used for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-ident keyword
| Synopsis | DHCP6 user identification for this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 dhcp6 user-ident keyword | |
| Tree | user-ident | |
| Options | ||
| Default | mac | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-bridged-mode boolean
| Synopsis | Enable IPv6 IPoE bridged mode | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 ipoe-bridged-mode boolean | |
| Tree | ipoe-bridged-mode | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-discovery
| Synopsis | Enter the neighbor-discovery context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dad-snooping boolean
| Synopsis | Populate table via duplicate address detection packets | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 neighbor-discovery dad-snooping boolean | |
| Tree | dad-snooping | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
neighbor-limit number
| Synopsis | Maximum neighbor entries learned per SLAAC host | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 neighbor-discovery neighbor-limit number | |
| Tree | neighbor-limit | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos-route-lookup keyword
| Synopsis | QoS route lookup | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 qos-route-lookup keyword | |
| Tree | qos-route-lookup | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
router-advertisements
| Synopsis | Enter the router-advertisements context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements | |
| Tree | router-advertisements | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router advertisements | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-mcast keyword
| Synopsis | Protocol with forced multicast | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements force-mcast keyword | |
| Tree | force-mcast | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-advertisement-interval number
| Synopsis | Maximum advertisement interval | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 900 to 1800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-advertisement-interval number
| Synopsis | Minimum advertisement interval | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 900 to 1350 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
| Synopsis | Enter the options context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options | |
| Tree | options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
current-hop-limit number
| Synopsis | Hop limit to be advertised | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options current-hop-limit number | |
| Tree | current-hop-limit | |
| Range | 0 to 255 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dns
| Synopsis | Enter the dns context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options dns | |
| Tree | dns | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
include-rdnss boolean
| Synopsis | Include the RDNSS server option 25 | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options dns include-rdnss boolean | |
| Tree | include-rdnss | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rdnss-lifetime (number | keyword)
| Synopsis | Maximum time for the RDNSS address to remain valid | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options dns rdnss-lifetime (number | keyword) | |
| Tree | rdnss-lifetime | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-configuration boolean
| Synopsis | Managed address configuration flag | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options managed-configuration boolean | |
| Tree | managed-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mtu (number | keyword)
| Synopsis | Advertised MTU value | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options mtu (number | keyword) | |
| Tree | mtu | |
| Range | 1280 to 9212 | |
| Units | bytes | |
| Options | ||
| Default | not-included | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
other-stateful-configuration boolean
| Synopsis | Other stateful configuration flag | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options other-stateful-configuration boolean | |
| Tree | other-stateful-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reachable-time number
| Synopsis | Reachable time for advertisements | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retransmit-timer number
| Synopsis | Retransmit time in router advertisements from interface | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options retransmit-timer number | |
| Tree | retransmit-timer | |
| Range | 0 to 1800000 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-lifetime (number | keyword)
| Synopsis | Router lifetime | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements options router-lifetime (number | keyword) | |
| Tree | router-lifetime | |
| Range | 2700 to 9000 | |
| Units | seconds | |
| Options | ||
| Default | 4500 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-options
| Synopsis | Enter the prefix-options context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options | |
| Tree | prefix-options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
autonomous boolean
| Synopsis | Value of the autonomous flag | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options autonomous boolean | |
| Tree | autonomous | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
on-link boolean
| Synopsis | Assign the prefix to an interface on the specified link | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options on-link boolean | |
| Tree | on-link | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain preferred | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain valid | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-advertisements prefix-options valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicit
| Synopsis | Enter the router-solicit context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-solicit | |
| Tree | router-solicit | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router-solicit authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-solicit admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
inactivity-timer (number | keyword)
| Synopsis | Time before an inactive host is removed | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-solicit inactivity-timer (number | keyword) | |
| Tree | inactivity-timer | |
| Range | 1 to 31536000 | |
| Units | seconds | |
| Options | ||
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-auth-interval number
| Synopsis | Minimum time between successive authentication attempts | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-solicit min-auth-interval number | |
| Tree | min-auth-interval | |
| Range | 1 to 360000 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | Local user database used for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 router-solicit user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
urpf-check
| Synopsis | Enable the urpf-check context | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 urpf-check | |
| Tree | urpf-check | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mode keyword
| Synopsis | Unicast RPF check mode | |
| Context | configure service vprn string subscriber-interface string group-interface string ipv6 urpf-check mode keyword | |
| Tree | mode | |
| Options | ||
| Default | strict | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-address-assignment
| Synopsis | Enter the local-address-assignment context | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment | |
| Tree | local-address-assignment | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Local Address Assignment | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe boolean
| Synopsis | Request local addresses for non-DHCP/managed IPoE hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications ipoe boolean | |
| Tree | ipoe | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Request local addresses for PPP IPCP hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-pool string
| Synopsis | Default pools | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 default-pool string | |
| Tree | default-pool | |
| String Length | 1 to 32 | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv4 server for local pools management | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv4 server reference | |
| Tree | server | |
Reference | configure service vprn string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enter the ipv6 context | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-slaac boolean
| Synopsis | Request local addresses for IPoE SLAAC hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ipoe-slaac boolean | |
| Tree | ipoe-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-wan boolean
| Synopsis | Request local addresses for IPoE IA NA hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ipoe-wan boolean | |
| Tree | ipoe-wan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp-slaac boolean
| Synopsis | Request local addresses for PPP SLAAC hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 client-applications ppp-slaac boolean | |
| Tree | ppp-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv6 server for local pools management | |
| Context | configure service vprn string subscriber-interface string group-interface string local-address-assignment ipv6 server reference | |
| Tree | server | |
Reference | configure service vprn string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address for the interface | |
| Context | configure service vprn string subscriber-interface string group-interface string mac string | |
| Tree | mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
nasreq-auth-policy reference
| Synopsis | Diameter NASREQ application policy to use for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string nasreq-auth-policy reference | |
| Tree | nasreq-auth-policy | |
Reference | configure subscriber-mgmt diameter-nasreq-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
oper-up-while-empty boolean
| Synopsis | Enable this group interface without any active SAPs | |
| Context | configure service vprn string subscriber-interface string group-interface string oper-up-while-empty boolean | |
| Tree | oper-up-while-empty | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe
| Synopsis | Enter the pppoe context | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe | |
| Tree | pppoe | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of PPPoE | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | PPPoE anti-spoof filtering | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Default | mac-sid | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp-client
| Synopsis | Enter the dhcp-client context | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe dhcp-client | |
| Tree | dhcp-client | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-id keyword
| Synopsis | Type of information that DHCP option 61 contains | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe dhcp-client client-id keyword | |
| Tree | client-id | |
| Options | ||
| Introduced | 16.0.R7 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | PPPoE policy | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe policy reference | |
| Tree | policy | |
Reference | configure subscriber-mgmt ppp-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy used to modify PPPoE packets | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-session-limit number
| Synopsis | Maximum PPPoE sessions per SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe sap-session-limit number | |
| Tree | sap-session-limit | |
| Range | 1 to 131071 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum PPPoE sessions | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe session-limit number | |
| Tree | session-limit | |
| Range | 1 to 333823 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Local user database for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string pppoe user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
radius-auth-policy reference
| Synopsis | RADIUS authentication policy | |
| Context | configure service vprn string subscriber-interface string group-interface string radius-auth-policy reference | |
| Tree | radius-auth-policy | |
Reference | configure subscriber-mgmt radius-authentication-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
redundant-interface reference
| Synopsis | Redundant interface | |
| Context | configure service vprn string subscriber-interface string group-interface string redundant-interface reference | |
| Tree | redundant-interface | |
Reference | configure service vprn string redundant-interface string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap [sap-id] string
| Synopsis | Enter the sap list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string | |
| Tree | sap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string | |
| Tree | sap | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
accounting-policy reference
| Synopsis | Accounting policy | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | Type of anti-spoof filtering | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
calling-station-id string
| Synopsis | Calling station ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string calling-station-id string | |
| Tree | calling-station-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
collect-stats boolean
| Synopsis | Collect accounting statistics | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpu-protection
| Synopsis | Enter the cpu-protection context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection | |
| Tree | cpu-protection | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
eth-cfm-monitoring
| Synopsis | Enable the eth-cfm-monitoring context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring | |
| Tree | eth-cfm-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
aggregate
| Synopsis | Apply rate limit to the sum of the per peer packet rates | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring aggregate | |
| Tree | aggregate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
car
| Synopsis | Ignore Ethernet CFM packets when enforcing overall rate | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection eth-cfm-monitoring car | |
| Tree | car | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
ip-src-monitoring
| Synopsis | Enable IP source monitoring for CPU protection | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection ip-src-monitoring | |
| Tree | ip-src-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
mac-monitoring
| Synopsis | Monitor MAC for CPU protection | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection mac-monitoring | |
| Tree | mac-monitoring | |
Notes | The following elements are part of a choice: eth-cfm-monitoring, ip-src-monitoring, or mac-monitoring. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
policy-id reference
| Synopsis | CPM protection policy | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string cpu-protection policy-id reference | |
| Tree | policy-id | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
default-host
| Synopsis | Enter the default-host context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host | |
| Tree | default-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ipv4 [address] reference prefix-length number
| Synopsis | Enter the ipv4 list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
[address] reference
| Synopsis | IPv4 default host address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
Reference | configure service vprn string subscriber-interface string ipv4 address string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number | |
| Tree | ipv4 | |
| Range | 0 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
next-hop string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Next-hop IP address used to forward traffic on the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv4 reference prefix-length number next-hop string | |
| Tree | next-hop | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s | |
ipv6 [address] string prefix-length number
| Synopsis | Enter the ipv6 list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
[address] string
| Synopsis | IPv6 default host address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
prefix-length number
| Synopsis | IPv6 prefix length | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number | |
| Tree | ipv6 | |
| Range | 0 to 128 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
next-hop string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Next-hop IP address used to forward traffic on the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string default-host ipv6 string prefix-length number next-hop string | |
| Tree | next-hop | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string description string | |
| Tree | description | |
| String Length | 1 to 160 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dist-cpu-protection reference
| Synopsis | Distributed CPU protection policy for SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string dist-cpu-protection reference | |
| Tree | dist-cpu-protection | |
Reference | configure system security dist-cpu-protection policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
egress
| Synopsis | Enter the egress context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
agg-rate
| Synopsis | Enter the agg-rate context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate | |
| Tree | agg-rate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
adaptation-rule keyword
| Synopsis | Adaptation rule to compute the operational PIR value when an aggregate shaper is used | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate adaptation-rule keyword | |
| Tree | adaptation-rule | |
| Options | ||
| Default | closest | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-s |
burst-limit (number | keyword)
| Synopsis | Shaping burst size when an aggregate shaper is used | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queue-frame-based-accounting boolean
| Synopsis | Enable frame based accounting on policers and queues | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate queue-frame-based-accounting boolean | |
| Tree | queue-frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rate number
| Synopsis | Enforced aggregate rate for all queues | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress agg-rate rate number | |
| Tree | rate | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter
| Synopsis | Enter the filter context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qinq-mark-top-only boolean
| Synopsis | Mark top Q-tags | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos qinq-mark-top-only boolean | |
| Tree | qinq-mark-top-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-egress
| Synopsis | Enter the sap-egress context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos sap-egress | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID to associate with SAP for mirrored service | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos sap-egress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string egress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
eth-cfm
| Synopsis | Enter the eth-cfm context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm | |
| Tree | eth-cfm | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
collect-lmm-fc-stats
| Synopsis | Enter the collect-lmm-fc-stats context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats | |
| Tree | collect-lmm-fc-stats | |
Description | Commands in this context configure per forwarding class (FC) LMM information collection. The commands fc-in-profile and fc in this context are mutually exclusive. The commands apply to either profile-aware or profile-unaware FCs respectively. This command and the collect-lmm-stats command are mutually exclusive when there is entity resource contention. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fc keyword
| Synopsis | Forwarding class name for profile-unaware counter | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats fc keyword | |
| Tree | fc | |
Description | This command configures individual counters for the specified FCs without regard for profile. The system includes all countable packets that match a configured FC, regardless of profile, in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-aware FC using the fc-in-profile command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fc-in-profile keyword
| Synopsis | Forwarding class name for profile-aware counter | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-fc-stats fc-in-profile keyword | |
| Tree | fc-in-profile | |
Description | This command configures individual counters for the specified FCs with regard to profile. The system includes all countable packets that match a configured FC and that are deemed to be in-profile in this counter. An FC specified as part of this command and for this specific context cannot be specified as a profile-unaware FC using the fc command under the collect-lmm-fc-stats context. When this command is reentered, a differential is performed. Omitted FCs stop counting, newly added FCs start counting, and unchanged FCs continue to count. | |
| Options | ||
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
collect-lmm-stats boolean
| Synopsis | Collect statistics for loss measurement message tests | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm collect-lmm-stats boolean | |
| Tree | collect-lmm-stats | |
Description | When configured to true, the router instantiates the statistical counter to transmit and receive packets for the LAG facility MEP bindings. The show eth-cfm collect-lmm-stats command displays entities that have been enabled to collect transit and receive counters. When configured to false, the router does not instantiate the counter and the LMM PDU associated with the MEP does not populate the counters in the packet. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
mep md-admin-name reference ma-admin-name reference mep-id number
| Synopsis | Enter the mep list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
md-admin-name reference
| Synopsis | Maintenance Domain (MD) name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | ||
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ma-admin-name reference
| Synopsis | Maintenance Association (MA) name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
Reference | configure eth-cfm domain string association string | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
mep-id number
| Synopsis | Maintenance Endpoint (MEP) ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number | |
| Tree | mep | |
| Range | 1 to 8191 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
admin-state keyword
| Synopsis | Administrative state of the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ais boolean
| Synopsis | Enable the generation and the reception of AIS messages | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ais boolean | |
| Tree | ais | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
alarm-notification
| Synopsis | Enter the alarm-notification context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification | |
| Tree | alarm-notification | |
Description | Commands in this context configure the Fault Notification Generator (FNG) time values to raise an alarm or reset the CCM defect alarm. Use these timers for network management processes. The timers are not tied into delaying the notification to the fault management system on the network element and do not affect fault propagation mechanisms. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fng-alarm-time number
| Synopsis | Time that must expire before an FNG alarm is raised | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-alarm-time number | |
| Tree | fng-alarm-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fng-reset-time number
| Synopsis | Time that must expire before an FNG alarm is reset | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number alarm-notification fng-reset-time number | |
| Tree | fng-reset-time | |
| Range | 250 | 500 | 1000 | |
| Units | centiseconds | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm boolean
| Synopsis | Generate CCM messages | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm boolean | |
| Tree | ccm | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm-ltm-priority number
| Synopsis | Priority of CCM and LTM messages transmitted by the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-ltm-priority number | |
| Tree | ccm-ltm-priority | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
ccm-padding-size number
| Synopsis | Number of octets of padding to insert in CCM packets | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number ccm-padding-size number | |
| Tree | ccm-padding-size | |
Description | This command sets the byte size of the optional Data TLV to be included in the ETH-CC PDU. This command increases the size of the ETH-CC PDU by the configured value. The base size of the ETH-CC PDU, including the Interface Status TLV and Port Status TLV, is 83 bytes not including the Layer 2 encapsulation. CCM padding is not supported when the CCM interval (configured through configure eth-cfm domain association ccm-interval) is less than 1 second. | |
| Range | 3 to 1500 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
csf
| Synopsis | Enable the csf context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf | |
| Tree | csf | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
multiplier decimal-number
| Synopsis | Multiplication factor used to clear the CSF condition | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number csf multiplier decimal-number | |
| Tree | multiplier | |
| Range | 0.0 | 2.0 to 30.0 | |
| Default | 3.5 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-test
| Synopsis | Enable the eth-test context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test | |
| Tree | eth-test | |
Description | Commands in this context configure information used by the Ethernet Test (ETH-TST) packet. The commands must be configured on both the sender and the receiver nodes. The test packets are used with the oam eth-cfm eth-test command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
bit-error-threshold number
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test bit-error-threshold number | |
| Tree | bit-error-threshold | |
| Range | 0 to 11840 | |
| Units | bit errors | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
test-pattern
| Synopsis | Enter the test-pattern context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern | |
| Tree | test-pattern | |
Description | Commands in this context specify the test pattern for the ETH-TST frames. The pattern does not have to be the same on the sender and the receiver. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
crc-tlv boolean
| Synopsis | Generate a CRC checksum | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern crc-tlv boolean | |
| Tree | crc-tlv | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
pattern keyword
| Synopsis | Test pattern for Ethernet Test frames | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number eth-test test-pattern pattern keyword | |
| Tree | pattern | |
Description | This command specifies the test pattern of the Ethernet Test (ETH-TST) frames. This does not have to be configured the same on the sender and the receiver. | |
| Options | ||
| Default | all-zeros | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fault-propagation keyword
| Synopsis | Fault propagation for the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number fault-propagation keyword | |
| Tree | fault-propagation | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
grace
| Synopsis | Enter the grace context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace | |
| Tree | grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function and the ITU-T Y.1731 Ethernet Expected Default (ETH-ED) function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-ed
| Synopsis | Enter the eth-ed context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed | |
| Tree | eth-ed | |
Description | Commands in this context configure the ITU-T Y.1731 ETH-ED function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
max-rx-defect-window number
| Synopsis | Maximum received ETH-ED expected defect window duration | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed max-rx-defect-window number | |
| Tree | max-rx-defect-window | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
priority number
| Synopsis | Transmission priority for ETH-ED PDUs | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
rx-eth-ed boolean
| Synopsis | Receive and process ETH-ED ITU-T Y.1731 PDUs on the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed rx-eth-ed boolean | |
| Tree | rx-eth-ed | |
Description | This command enables the reception and processing of the ITU-T Y.1731 ETH-ED PDU on the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
tx-eth-ed boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-ed tx-eth-ed boolean | |
| Tree | tx-eth-ed | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
eth-vsm-grace
| Synopsis | Enter the eth-vsm-grace context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace | |
| Tree | eth-vsm-grace | |
Description | Commands in this context configure the Nokia ETH-CFM Grace function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
rx-eth-vsm-grace boolean
| Synopsis | Receive and process Nokia ETH-CFM Grace PDU on the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace rx-eth-vsm-grace boolean | |
| Tree | rx-eth-vsm-grace | |
Description | When configured to true, the router enables the Nokia Grace function, which is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. When configured to false, the router disables the Nokia Grace function. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
tx-eth-vsm-grace boolean
| Synopsis | Transmit ETH-ED PDUs from the MEP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number grace eth-vsm-grace tx-eth-vsm-grace boolean | |
| Tree | tx-eth-vsm-grace | |
Description | When configured to true, the router can transmit the Nokia ETH-CFM Grace PDU from the MEP when a system soft reset notification is received for one or more cards. The Nokia Grace function is a vendor-specific PDU that informs MEP peers that the local node may be entering a period of expected defect. The operator must configure the configure system eth-cfm grace command to instruct the system that the node is capable of transmitting expected-defect windows to peers. The system can only transmit one form of ETH-CFM grace (Nokia ETH-CFM Grace or ITU-T Y.1731 ETH-ED). When configured to false, the router disables the transmission of the Nokia ETH-CFM Grace PDU from the MEP. | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
low-priority-defect keyword
| Synopsis | Lowest priority defect allowed to generate fault alarm | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number low-priority-defect keyword | |
| Tree | low-priority-defect | |
| Options | ||
| Default | mac-rem-err-xcon | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
one-way-delay-threshold number
| Synopsis | Threshold time limit for the one-way delay test | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm mep md-admin-name reference ma-admin-name reference mep-id number one-way-delay-threshold number | |
| Tree | one-way-delay-threshold | |
| Range | 0 to 600 | |
| Units | seconds | |
| Default | 3 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
squelch-ingress-levels number
| Synopsis | Levels for which ETH-CFM packets are silently discarded | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string eth-cfm squelch-ingress-levels number | |
| Tree | squelch-ingress-levels | |
Description | This command defines the levels of the ETH-CFM packets that are silently discarded on ingress into the SAP or SDP binding from the wire that matches the service delineation of the SAP or SDP binding. All ETH-CFM packets inbound to the SAP or SDP binding that match the configured levels are dropped without regard for any other ETH-CFM criteria. No statistical information or drop count is available for any ETH-CFM packet that is silently discarded by this option. The list of levels must be a complete contiguous list from 0 up to the highest level that will be dropped. | |
| Range | 0 to 7 | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
fwd-wholesale
| Synopsis | Enter the fwd-wholesale context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string fwd-wholesale | |
| Tree | fwd-wholesale | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe-service reference
| Synopsis | PPPoE service name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string fwd-wholesale pppoe-service reference | |
| Tree | pppoe-service | |
Reference | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-admin-state keyword
| Synopsis | Administrative state of the hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string host-admin-state keyword | |
| Tree | host-admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-lockout-policy reference
| Synopsis | Host lockout policy | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string host-lockout-policy reference | |
| Tree | host-lockout-policy | |
Reference | configure subscriber-mgmt host-lockout-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
igmp-host-tracking
| Synopsis | Enter the igmp-host-tracking context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking | |
| Tree | igmp-host-tracking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
expiry-time number
| Synopsis | Time that the system continues to track inactive hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking expiry-time number | |
| Tree | expiry-time | |
| Range | 1 to 65535 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
import-policy reference
| Synopsis | Import policy that filters IGMP packets | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking import-policy reference | |
| Tree | import-policy | |
Reference | configure policy-options policy-statement string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-group-sources number
| Synopsis | Maximum number of multicast groups to track per group | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-group-sources number | |
| Tree | maximum-number-group-sources | |
| Range | 1 to 32000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-groups number
| Synopsis | Maximum number of multicast groups to be tracked | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-groups number | |
| Tree | maximum-number-groups | |
| Range | 1 to 16000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
maximum-number-sources number
| Synopsis | Maximum number of multicast sources to be tracked | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking maximum-number-sources number | |
| Tree | maximum-number-sources | |
| Range | 1 to 1000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-alert-check boolean
| Synopsis | Enable IGMP router alert check option | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string igmp-host-tracking router-alert-check boolean | |
| Tree | router-alert-check | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
filter
| Synopsis | Enter the filter context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress filter | |
| Tree | filter | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip reference
ipv6 reference
| Synopsis | IPv6 filter policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress filter ipv6 reference | |
| Tree | ipv6 | |
Reference | configure filter ipv6-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qos
| Synopsis | Enter the qos context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos | |
| Tree | qos | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
match-qinq-dot1p keyword
| Synopsis | Ingress match QinQ Dot1p | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos match-qinq-dot1p keyword | |
| Tree | match-qinq-dot1p | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-control-policy
| Synopsis | Enter the policer-control-policy context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos policer-control-policy | |
| Tree | policer-control-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policer control policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos policer-control-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos policer-control-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sap-ingress
| Synopsis | Enter the sap-ingress context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos sap-ingress | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Policy ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos sap-ingress policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queuing-type keyword
| Synopsis | Queuing type | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos sap-ingress queuing-type keyword | |
| Tree | queuing-type | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, VSR |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string ingress qos scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lag
| Synopsis | Enter the lag context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string lag | |
| Tree | lag | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-map-profile number
| Synopsis | LAG link map profile for a SAP or network interface | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string lag link-map-profile number | |
| Tree | link-map-profile | |
Description | This command assigns a preconfigured LAG link map profile to a SAP or network interface configured on a LAG or a PW port that exists on a LAG. After an operator assigns a LAG link map profile, the system rehashes the SAP or network interface egress traffic over the LAG as required by the new configuration. If the LAG link map profile for a SAP or network interface is deleted, the system reverts back to per-flow hashing. | |
| Range | 1 to 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
per-link-hash
| Synopsis | Enter the per-link-hash context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string lag per-link-hash | |
| Tree | per-link-hash | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
class number
| Synopsis | Class used on LAG egress using weighted per-link-hash | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string lag per-link-hash class number | |
| Tree | class | |
| Range | 1 to 3 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight used on LAG egress using weighted per-link-hash | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string lag per-link-hash weight number | |
| Tree | weight | |
| Range | 1 to 1024 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
monitor-oper-group reference
| Synopsis | Monitor operational group | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multi-service-site reference
| Synopsis | Multi service site name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string multi-service-site reference | |
| Tree | multi-service-site | |
Reference | configure service customer string multi-service-site string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
oper-group reference
| Synopsis | Operational group | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string oper-group reference | |
| Tree | oper-group | |
Reference | configure service oper-group string | |
Notes | The following elements are part of a choice: monitor-oper-group or oper-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
static-host
| Synopsis | Enter the static-host context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host | |
| Tree | static-host | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4 [ip] string mac string
| Synopsis | Enter the ipv4 list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ip] string
| Synopsis | IPv4 address used by the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address used by the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string | |
| Tree | ipv4 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | Scope of the static host application profile | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string app-profile scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subscriber | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-route [prefix] string
| Synopsis | Enter the managed-route list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string | |
| Tree | managed-route | |
Description | Commands in this context configure managed route parameters. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix] string
| Synopsis | Managed route prefix associated with IPv4 static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string | |
| Tree | managed-route | |
Description | This command configures the managed route prefix. The prefix length must be in the range of 1 to 32. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpe-check
| Synopsis | Enable the cpe-check context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check | |
| Tree | cpe-check | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the target CPE device | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | destination-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 22.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failed-action
| Synopsis | Enter the failed-action context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action | |
| Tree | failed-action | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the provisioned managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated to the provisioned managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag used if CPE check fails | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
withdraw boolean
| Synopsis | Withdraw the route when the CPE check fails | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check failed-action withdraw boolean | |
| Tree | withdraw | |
| Default | false | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Source IP address used in the ICMP messages | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Time interval determining that a ping is missed | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string cpe-check timeout number | |
| Tree | timeout | |
| Range | 1 to 10 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string managed-route string tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rip-policy reference
| Synopsis | RIP policy name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string rip-policy reference | |
| Tree | rip-policy | |
Reference | configure subscriber-mgmt rip-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv
| Synopsis | Enter the shcv context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string shcv | |
| Tree | shcv | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv4 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6 [prefix] string mac string
| Synopsis | Enter the ipv6 list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[prefix] string
| Synopsis | IPv6 prefix | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac string
| Synopsis | MAC address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string | |
| Tree | ipv6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ancp-string string
| Synopsis | ANCP string | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string ancp-string string | |
| Tree | ancp-string | |
| String Length | 1 to 63 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile
| Synopsis | Enter the app-profile context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile | |
| Tree | app-profile | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | Application profile used by the static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
scope keyword
| Synopsis | Scope of the static host application profile | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string app-profile scope keyword | |
| Tree | scope | |
| Options | ||
| Default | subscriber | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id string
| Synopsis | Intermediate destination ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string int-dest-id string | |
| Tree | int-dest-id | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-linking string
| Synopsis | IPv6 host linked with IPv4 host via learned MAC address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string mac-linking string | |
| Tree | mac-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-route [ipv6-prefix] string
| Synopsis | Enter the managed-route list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string | |
| Tree | managed-route | |
Description | Commands in this context configure managed route parameters. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-prefix] string
| Synopsis | Managed route prefix associated with IPv6 static host | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string | |
| Tree | managed-route | |
Description | This command configures the managed route prefix. The prefix length must be in the range of 1 to 128. | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cpe-check
| Synopsis | Enable the cpe-check context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check | |
| Tree | cpe-check | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IP address of the target CPE device | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check destination-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | destination-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
drop-count number
| Synopsis | Consecutive ping replies missed before CPE deemed down | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check drop-count number | |
| Tree | drop-count | |
| Range | 1 to 255 | |
| Default | 3 | |
| Introduced | 22.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
failed-action
| Synopsis | Enter the failed-action context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action | |
| Tree | failed-action | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the provisioned managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated to the provisioned managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag used if CPE check fails | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
|
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
withdraw boolean
| Synopsis | Withdraw the route when the CPE check fails | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check failed-action withdraw boolean | |
| Tree | withdraw | |
| Default | false | |
Notes | The following elements are part of a choice: (metric, preference, and tag) or withdraw. | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interval between ICMP pings to target CPE IP address | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check interval number | |
| Tree | interval | |
| Range | 1 to 255 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
log boolean
| Synopsis | Log CPE connectivity checks transitions | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check log boolean | |
| Tree | log | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
padding-size number
| Synopsis | Padding size for CPE connectivity checks | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check padding-size number | |
| Tree | padding-size | |
| Range | 0 to 16384 | |
| Units | bytes | |
| Default | 56 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Source IP address used in the ICMP messages | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check source-ip-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | source-ip-address | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
timeout number
| Synopsis | Time interval determining that a ping is missed | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string cpe-check timeout number | |
| Tree | timeout | |
| Range | 1 to 10 | |
| Units | seconds | |
| Default | 1 | |
| Introduced | 22.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
metric number
| Synopsis | Metric associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string metric number | |
| Tree | metric | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference number
| Synopsis | Preference associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string preference number | |
| Tree | preference | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tag number
| Synopsis | Route tag associated with the managed route | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string managed-route string tag number | |
| Tree | tag | |
| Max. Range | 0 to 4294967295 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retail-svc-id number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Retail service ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string retail-svc-id number | |
| Tree | retail-svc-id | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
shcv
| Synopsis | Enter the shcv context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string shcv | |
| Tree | shcv | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Sub-profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Subscriber identification | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-sap-id
| Synopsis | Use the SAP id as subscriber ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host ipv6 string mac string subscriber-id use-sap-id | |
| Tree | use-sap-id | |
Notes | The following elements are part of a choice: string or use-sap-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-learning
| Synopsis | Enter the mac-learning context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host mac-learning | |
| Tree | mac-learning | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
data-triggered boolean
| Synopsis | Enable learning of MAC addresses from data packets | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host mac-learning data-triggered boolean | |
| Tree | data-triggered | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
single-mac boolean
| Synopsis | Enforce single MAC address and subscriber for the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string static-host mac-learning single-mac boolean | |
| Tree | single-mac | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-sla-mgmt
| Synopsis | Enter the sub-sla-mgmt context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt | |
| Tree | sub-sla-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of SAP subscriber management | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
| Synopsis | Enter the defaults context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults | |
| Tree | defaults | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Default application profile name for this SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
int-dest-id
| Synopsis | Enter the int-dest-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id | |
| Tree | int-dest-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Use the configured string | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id string string | |
| Tree | string | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
top-q-tag
| Synopsis | Use the top Q-tag of this SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults int-dest-id top-q-tag | |
| Tree | top-q-tag | |
Notes | The following elements are part of a choice: string or top-q-tag. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Default SLA profile for hosts on this SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Default subscriber profile for the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-id
| Synopsis | Use auto-generated subscriber identification string | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id auto-id | |
| Tree | auto-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id
| Synopsis | Use SAP ID as default subscriber identification string | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id sap-id | |
| Tree | sap-id | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | Default subscriber identification string for the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt defaults subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: auto-id, sap-id, or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
single-sub-parameters
| Synopsis | Enter the single-sub-parameters context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters | |
| Tree | single-sub-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
non-sub-traffic
| Synopsis | Enable the non-sub-traffic context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic | |
| Tree | non-sub-traffic | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Application profile name for all non-subscriber traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | SLA profile applicable for all non-subscriber traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Subscriber profile all non-subscriber traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Subscriber ID applied for all non-subscriber traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters non-sub-traffic subscriber-id string | |
| Tree | subscriber-id | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
profiled-traffic-only boolean
| Synopsis | Include all traffic in subscriber profile | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt single-sub-parameters profiled-traffic-only boolean | |
| Tree | profiled-traffic-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-ident-policy reference
| Synopsis | Subscriber identification policy used on this SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt sub-ident-policy reference | |
| Tree | sub-ident-policy | |
Reference | configure subscriber-mgmt sub-ident-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-limit (keyword | number)
| Synopsis | Maximum number of subscribers on this SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap string sub-sla-mgmt subscriber-limit (keyword | number) | |
| Tree | subscriber-limit | |
| Range | 1 to 131071 | |
| Options | ||
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-parameters
| Synopsis | Enter the sap-parameters context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters | |
| Tree | sap-parameters | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
anti-spoof keyword
| Synopsis | Anti-spoof type of the SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters anti-spoof keyword | |
| Tree | anti-spoof | |
| Options | ||
| Default | ip-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-sla-mgmt
| Synopsis | Enter the sub-sla-mgmt context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt | |
| Tree | sub-sla-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
defaults
| Synopsis | Enter the defaults context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults | |
| Tree | defaults | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Default application profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Default SLA profile | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Default subscriber profile | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
subscriber-id
| Synopsis | Enter the subscriber-id context | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id | |
| Tree | subscriber-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
auto-id
| Synopsis | Subscriber ID that is autogenerated | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id auto-id | |
| Tree | auto-id | |
Notes | The following elements are part of a choice: auto-id or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | String to be used as default subscriber ID | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt defaults subscriber-id string string | |
| Tree | string | |
| String Length | 1 to 64 | |
Notes | The following elements are part of a choice: auto-id or string. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-ident-policy reference
| Synopsis | Subscriber identification policy | |
| Context | configure service vprn string subscriber-interface string group-interface string sap-parameters sub-sla-mgmt sub-ident-policy reference | |
| Tree | sub-ident-policy | |
Reference | configure subscriber-mgmt sub-ident-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy reference
| Synopsis | SHCV policy for IPv4 and IPv6 subscriber hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string shcv-policy reference | |
| Tree | shcv-policy | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy-ipv4 reference
| Synopsis | SHCV for IPv4 subscriber hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string shcv-policy-ipv4 reference | |
| Tree | shcv-policy-ipv4 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
shcv-policy-ipv6 reference
| Synopsis | SHCV for IPv6 subscriber hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string shcv-policy-ipv6 reference | |
| Tree | shcv-policy-ipv6 | |
Reference | configure subscriber-mgmt shcv-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
srrp [srrp-id] number
| Synopsis | Enter the srrp list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number | |
| Tree | srrp | |
| Max. Instances | 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[srrp-id] number
| Synopsis | SRRP instance ID | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number | |
| Tree | srrp | |
| Range | 1 to 4294967295 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of SRRP | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd-liveness
| Synopsis | Enable the bfd-liveness context | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number bfd-liveness | |
| Tree | bfd-liveness | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dest-ip string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Destination IPv4 prefix | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number bfd-liveness dest-ip string | |
| Tree | dest-ip | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
interface-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Name of the interface running BFD | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number bfd-liveness interface-name string | |
| Tree | interface-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
service-name string
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative service name | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number bfd-liveness service-name string | |
| Tree | service-name | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gw-mac string
| Synopsis | Gateway MAC address | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number gw-mac string | |
| Tree | gw-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
keep-alive-interval number
| Synopsis | Interval between SRRP advertisements | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number keep-alive-interval number | |
| Tree | keep-alive-interval | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
message-path reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | SAP to use as the SRRP message path | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number message-path reference | |
| Tree | message-path | |
Reference | configure service vprn string subscriber-interface string group-interface string sap string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
monitor-oper-group
| Synopsis | Enter the monitor-oper-group context | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number monitor-oper-group | |
| Tree | monitor-oper-group | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
group-name reference
| Synopsis | Operational group name | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number monitor-oper-group group-name reference | |
| Tree | group-name | |
Reference | configure service oper-group string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
priority-step number
| Synopsis | Step value to change priority of SRRP instance | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number monitor-oper-group priority-step number | |
| Tree | priority-step | |
| Range | 1 to 10 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
one-garp-per-sap boolean
| Synopsis | Send one gratuitous ARP to each SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number one-garp-per-sap boolean | |
| Tree | one-garp-per-sap | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | VRRP priority control policy associated with the SRRP | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number policy reference | |
| Tree | policy | |
Reference | ||
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preempt boolean
| Synopsis | Allow the SRRP instance to override an existing master | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number preempt boolean | |
| Tree | preempt | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
priority number
| Synopsis | Priority for this interface at this level | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number priority number | |
| Tree | priority | |
| Range | 1 to 254 | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
send-fib-population-packets keyword
| Synopsis | Mode used to send FIB population packets on switchover | |
| Context | configure service vprn string subscriber-interface string group-interface string srrp number send-fib-population-packets keyword | |
| Tree | send-fib-population-packets | |
| Options | ||
| Default | all | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
suppress-aa-sub boolean
| Synopsis | Enable application assurance suppression for ESM subscribers | |
| Context | configure service vprn string subscriber-interface string group-interface string suppress-aa-sub boolean | |
| Tree | suppress-aa-sub | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
tos-marking-state keyword
| Synopsis | TOS marking state | |
| Context | configure service vprn string subscriber-interface string group-interface string tos-marking-state keyword | |
| Tree | tos-marking-state | |
| Options | ||
| Default | trusted | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Group interface type | |
| Context | configure service vprn string subscriber-interface string group-interface string type keyword | |
| Tree | type | |
| Options | ||
| Default | plain | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw
| Synopsis | Enter the wlan-gw context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw | |
| Tree | wlan-gw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WLAN Gateway | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gateway-address [address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the gateway-address list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
| Max. Instances | 10 | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Gateway endpoint address of the WLAN Gateway tunnel | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | gateway-address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
purpose
| Synopsis | Enter the purpose context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) purpose | |
| Tree | purpose | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
xconnect boolean
| Synopsis | Use tunnel IP address for crosse-connect traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw gateway-address (ipv4-address-no-zone | ipv6-address-no-zone) purpose xconnect boolean | |
| Tree | xconnect | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
gateway-router string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Routing instance the WLAN-GW endpoint resides in | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw gateway-router string | |
| Tree | gateway-router | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
group-encryption
| Synopsis | Enter the group-encryption context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw group-encryption | |
| Tree | group-encryption | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encryption-keygroup-inbound reference
| Synopsis | Encryption keygroup for inbound traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw group-encryption encryption-keygroup-inbound reference | |
| Tree | encryption-keygroup-inbound | |
Reference | configure group-encryption encryption-keygroup number | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encryption-keygroup-outbound reference
| Synopsis | Encryption keygroup for inbound traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw group-encryption encryption-keygroup-outbound reference | |
| Tree | encryption-keygroup-outbound | |
Reference | configure group-encryption encryption-keygroup number | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-ap
| Synopsis | Enter the l2-ap context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap | |
| Tree | l2-ap | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
access-point [sap-id] string
| Synopsis | Enter the access-point list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap access-point string | |
| Tree | access-point | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[sap-id] string
| Synopsis | SAP ID for the Layer 2 access point | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap access-point string | |
| Tree | access-point | |
| String Length | 1 to 45 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the L2 access points | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap access-point string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
encap-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Service encapsulation type of this access point | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap access-point string encap-type keyword | |
| Tree | encap-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
epipe-sap-template reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Parameters template for the L2 access point SAP | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap access-point string epipe-sap-template reference | |
| Tree | epipe-sap-template | |
Reference | configure service template epipe-sap-template string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
auto-sub-id-fmt keyword
| Synopsis | Format of the auto-generated subscriber ID | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap auto-sub-id-fmt keyword | |
| Tree | auto-sub-id-fmt | |
| Options | ||
| Default | include-ap-tags | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-encap-type keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default encapsulation type for Layer 2 access points | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw l2-ap default-encap-type keyword | |
| Tree | default-encap-type | |
| Options | ||
| Default | null | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
lanext
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable the lanext context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw lanext | |
| Tree | lanext | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-bd number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of bridge domains | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw lanext max-bd number | |
| Tree | max-bd | |
| Range | 1 to 131071 | |
| Default | 131071 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
learn-ap-mac
| Synopsis | Enable the learn-ap-mac context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw learn-ap-mac | |
| Tree | learn-ap-mac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
delay-auth boolean
| Synopsis | Delay AP-MAC until after ARP/ND authentication response | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw learn-ap-mac delay-auth boolean | |
| Tree | delay-auth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mobility
| Synopsis | Enter the mobility context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility | |
| Tree | mobility | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Minimum time between two mobility events for single UE | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility hold-time number | |
| Tree | hold-time | |
| Range | 0 to 255 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
inter-tunnel-type boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enable mobility between terminating tunnel types | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility inter-tunnel-type boolean | |
| Tree | inter-tunnel-type | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
inter-vlan boolean
| Synopsis | Allow mobility within different VLANs of the same range | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility inter-vlan boolean | |
| Tree | inter-vlan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
trigger
| Synopsis | Enter the trigger context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility trigger | |
| Tree | trigger | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
control boolean
| Synopsis | Use control traffic as a mobility trigger | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility trigger control boolean | |
| Tree | control | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
data boolean
| Synopsis | Use data traffic as mobility trigger | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility trigger data boolean | |
| Tree | data | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
iapp boolean
| Synopsis | Use IAPP messages as a mobility trigger | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw mobility trigger iapp boolean | |
| Tree | iapp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
oper-down-on-group-degrade boolean
| Synopsis | Bring interface down when the ISA WLAN Gateway degraded | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw oper-down-on-group-degrade boolean | |
| Tree | oper-down-on-group-degrade | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tcp-mss-adjust number
| Synopsis | TCP Maximum Segment Size (MSS) adjustment for gateway | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tcp-mss-adjust number | |
| Tree | tcp-mss-adjust | |
| Range | 160 to 10240 | |
| Units | bytes | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tunnel-egress-qos
| Synopsis | Enter the tunnel-egress-qos context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos | |
| Tree | tunnel-egress-qos | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of egress QoS for WLAN-GW tunnels | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
agg-rate-limit (number | keyword)
| Synopsis | HQoS aggregate rate limit | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos agg-rate-limit (number | keyword) | |
| Tree | agg-rate-limit | |
| Range | 1 to 100000000 | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
granularity keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Granularity of the egress shaping for WLAN Gateway | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos granularity keyword | |
| Tree | granularity | |
| Options | per-tunnel – Applied to each tunnel per-retailer – Applied to each retailer Mobile Network Operator's fraction of the tunnel payload | |
| Default | per-tunnel | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
hold-time (number | keyword)
| Synopsis | Minimum time to hold egress shaping resources | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos hold-time (number | keyword) | |
| Tree | hold-time | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
multi-client-only boolean
| Synopsis | Allow shaping for tunnel traffic for multiple UEs | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos multi-client-only boolean | |
| Tree | multi-client-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
qos reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress QoS policy linked with each interface tunnel | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos qos reference | |
| Tree | qos | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
scheduler-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress scheduler policy linked with each tunnel | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-egress-qos scheduler-policy reference | |
| Tree | scheduler-policy | |
Reference | configure qos scheduler-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
tunnel-encaps
| Synopsis | Enter the tunnel-encaps context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-encaps | |
| Tree | tunnel-encaps | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
learn-l2tp-cookie (keyword | hex-string)
| Synopsis | System that learns the cookie from L2TP tunnels terminating on this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw tunnel-encaps learn-l2tp-cookie (keyword | hex-string) | |
| Tree | learn-l2tp-cookie | |
| String Length | 6 | |
| Options | never – Never interpret the cookie always – Interpret cookie regardless of first two octets value | |
| Default | never | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vlan-range [range] string
| Synopsis | Enter the vlan-range list instance | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string | |
| Tree | vlan-range | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[range] string
| Synopsis | IEEE 802.1q VLAN tag range | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string | |
| Tree | vlan-range | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authentication
| Synopsis | Enter the authentication context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication | |
| Tree | authentication | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-time number
| Synopsis | Minimum time UE held down after failed authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication hold-time number | |
| Tree | hold-time | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
local
| Synopsis | Enable the local context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local | |
| Tree | local | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
coa-policy reference
| Synopsis | RADIUS ISA policy applied to CoA or disconnect messages | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local coa-policy reference | |
| Tree | coa-policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
default-ue-state keyword
| Synopsis | UE state accepted for immediate authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication local default-ue-state keyword | |
| Tree | default-ue-state | |
| Options | portal – Portal redirect UE using the http-redirect-policy dsm – DSM UE using DSM parameters | |
Notes | This element is mandatory. | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
on-control-plane boolean
| Synopsis | Allow authentication on first control plane packet | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication on-control-plane boolean | |
| Tree | on-control-plane | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy reference
| Synopsis | RADIUS policy for authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication policy reference | |
| Tree | policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vlan-mismatch-timeout number
| Synopsis | Timeout if packet received with a non-matching VLAN tag | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string authentication vlan-mismatch-timeout number | |
| Tree | vlan-mismatch-timeout | |
| Range | 5 to 60 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
data-triggered-ue-creation
| Synopsis | Enter the data-triggered-ue-creation context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation | |
| Tree | data-triggered-ue-creation | |
Description | Commands in this context configure data-triggered subscriber creation for Wi-Fi subscribers. Data-triggered UE creation only works upon receipt of TCP and UDP packets. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of data-triggered UE creation | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
arp boolean
| Synopsis | Authenticate ARP packets received from an unknown UE | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation arp boolean | |
| Tree | arp | |
| Default | false | |
| Introduced | 22.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
create-proxy-cache-entry
| Synopsis | Enter the create-proxy-cache-entry context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry | |
| Tree | create-proxy-cache-entry | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mac-format string
| Synopsis | MAC address format | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry mac-format string | |
| Tree | mac-format | |
| String Length | 2 to 7 | |
| Default | aa: | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enable the proxy-server context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
name string
| Synopsis | RADIUS Proxy server name | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server name string | |
| Tree | name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Router instance of the RADIUS proxy server | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation create-proxy-cache-entry proxy-server router-instance string | |
| Tree | router-instance | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ospf boolean
| Synopsis | Authenticate OSPF packets received from an unknown UE | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string data-triggered-ue-creation ospf boolean | |
| Tree | ospf | |
Description | When configured to true, the system triggers UE authentication based on OSPFv2 or OSPFv3 packets. These packets are used with the dynamic VPLS service. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp4
| Synopsis | Enter the dhcp4 context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 | |
| Tree | dhcp4 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv4 | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dns string
| Synopsis | DNS servers signaled in DHCP | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 dns string | |
| Tree | dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-aware-ip-address (ipv4-unicast-address | keyword)
| Synopsis | L2-Aware NAT inside IP address | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 l2-aware-ip-address (ipv4-unicast-address | keyword) | |
| Tree | l2-aware-ip-address | |
| Options | from-pool – IP address allocated from a pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Lease time an authenticated user | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Lease time for migrant user (unauthenticated) | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 lease-time initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nbns string
| Synopsis | NetBIOS servers signaled in DHCP | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp4 nbns string | |
| Tree | nbns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
| Synopsis | Enter the dhcp6 context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 | |
| Tree | dhcp6 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the protocol | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime
| Synopsis | Enter the preferred-lifetime context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime | |
| Tree | preferred-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Preferred signaled lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Signaled preferred lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 preferred-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime
| Synopsis | Enter the valid-lifetime context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime | |
| Tree | valid-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Signaled valid lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Valid signaled lifetime UE is not fully authenticated | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dhcp6 valid-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dsm
| Synopsis | Enter the dsm context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm | |
| Tree | dsm | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting-policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA Radius Policy for accounting | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
accounting-update
| Synopsis | Enable the accounting-update context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-update | |
| Tree | accounting-update | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
interval number
| Synopsis | Interim accounting update messages interval | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm accounting-update interval number | |
| Tree | interval | |
| Range | 5 to 259200 | |
| Units | minutes | |
Notes |
This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DSM | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
application-assurance
| Synopsis | Enter the application-assurance context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance | |
| Tree | application-assurance | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting-statistics boolean
| Synopsis | Collect AA statistics | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance accounting-statistics boolean | |
| Tree | accounting-statistics | |
| Default | false | |
| Introduced | 21.10.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
profile reference
| Synopsis | AA application profile used for portal authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance profile reference | |
| Tree | profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
url-parameter string
| Synopsis | AA URL parameter included for HTTP portal redirect | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm application-assurance url-parameter string | |
| Tree | url-parameter | |
| String Length | 1 to 247 | |
| Introduced | 22.2.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
egress
| Synopsis | Enter the egress context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policer reference
| Synopsis | Policer for egress traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm egress policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ip-filter reference
| Synopsis | Filter for ingress traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress ip-filter reference | |
| Tree | ip-filter | |
Reference | configure subscriber-mgmt isa-filter string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policer reference
| Synopsis | Policer for ingress traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
soft-quota-exhausted-filter reference
| Synopsis | Filter applied when soft volume quota is reached | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm ingress soft-quota-exhausted-filter reference | |
| Tree | soft-quota-exhausted-filter | |
Description | This command applies a filter when a soft volume quota is reached. The filter replaces the currently applied filter (which can be preconfigured using the ip-filter command in the configure service vprn subscriber-interface group-interface wlan-gw vlan-range dsm ingress ip-filter context or be set using a RADIUS CoA message) for the UE upon quota exhaustion. If the quota is extended using a RADIUS CoA message, the filter is automatically reverted. Configuration changes apply only to new DSM UEs and not to existing UEs. | |
Reference | configure subscriber-mgmt isa-filter string | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
one-time-redirect
| Synopsis | Enter the one-time-redirect context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect | |
| Tree | one-time-redirect | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
port number
| Synopsis | Destination port of packets for HTTP redirect | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect port number | |
| Tree | port | |
| Range | 1 to 65535 | |
| Default | 80 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
url string
| Synopsis | URL for redirected HTTP protocol packets | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm one-time-redirect url string | |
| Tree | url | |
| String Length | 1 to 255 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
volume-quota-direction keyword
| Synopsis | Volume quota direction for WLAN GW | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dsm volume-quota-direction keyword | |
| Tree | volume-quota-direction | |
Description | This command specifies the direction that volume quotas are applied. Configuration changes apply only to new DSM UEs and not to existing UEs. | |
| Options | both – Both directions ingress – Ingress direction (upstream) egress – Egress direction (downstream) | |
| Default | both | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dynamic-service boolean
| Synopsis | Dynamically assign WLAN-GW subscriber to a VPLS service | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string dynamic-service boolean | |
| Tree | dynamic-service | |
Description | When configured to true, the WLAN-GW subscriber is dynamically assigned to a VPLS service, based on RADIUS authentication reply attributes. This feature is used in conjunction with the configure service vpls wlan-gw wlan-gw-group command. See "Dynamic VPLS service" in the 7450 ESS, 7750 SR, and VSR Triple Play Service Delivery Architecture Guide for more information about the dynamic VPLS service feature. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
extension [extension-range] string
| Synopsis | Add a list entry for extension | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string extension string | |
| Tree | extension | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
[extension-range] string
| Synopsis | VLAN tag range used for matching | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string extension string | |
| Tree | extension | |
Description | This command configures the additional VLAN range that is used for matching. Any traffic within the extension range is considered part of the same VLAN range for purposes of intra-SSID mobility. | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
http-redirect-policy reference
| Synopsis | Default HTTP redirect policy for portal authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string http-redirect-policy reference | |
| Tree | http-redirect-policy | |
Reference | configure subscriber-mgmt http-redirect-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
idle-timeout-action keyword
| Synopsis | Action to perform when the idle timeout expires | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string idle-timeout-action keyword | |
| Tree | idle-timeout-action | |
| Options | ||
| Default | remove | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
l2-service
| Synopsis | Enable the l2-service context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service | |
| Tree | l2-service | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Layer 2 service for VLAN range | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
service reference
| Synopsis | Layer 2 service associated with the range | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string l2-service service reference | |
| Tree | service | |
Reference | ||
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
nat-policy reference
| Synopsis | NAT policy for DSM and ISA portal authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string nat-policy reference | |
| Tree | nat-policy | |
Reference | configure service nat nat-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
retail-service string
| Synopsis | Default retail service for new UEs in this range | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string retail-service string | |
| Tree | retail-service | |
| String Length | 1 to 64 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
slaac
| Synopsis | Enter the slaac context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac | |
| Tree | slaac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the protocol | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime
| Synopsis | Enter the preferred-lifetime context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime | |
| Tree | preferred-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Preferred signaled lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Signaled preferred lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac preferred-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime
| Synopsis | Enter the valid-lifetime context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime | |
| Tree | valid-lifetime | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
active number
| Synopsis | Signaled valid lifetime after full authentication | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime active number | |
| Tree | active | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
initial number
| Synopsis | Valid signaled lifetime UE is not fully authenticated | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string slaac valid-lifetime initial number | |
| Tree | initial | |
| Range | 300 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
vrgw
| Synopsis | Enter the vrgw context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw | |
| Tree | vrgw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of vRGW | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
brg
| Synopsis | Enter the brg context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg | |
| Tree | brg | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
authenticated-brg-only boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Only allow hosts from BRGs pre-authenticated using the radius-proxy | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg authenticated-brg-only boolean | |
| Tree | authenticated-brg-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
default-brg-profile reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Default BRG profile to use if the AAA server does not specify one | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw brg default-brg-profile reference | |
| Tree | default-brg-profile | |
Reference | configure subscriber-mgmt vrgw brg-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
lanext
| Synopsis | Enter the lanext context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext | |
| Tree | lanext | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
access
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the access context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access | |
| Tree | access | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-mac number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of allowed MAC entries on access side | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access max-mac number | |
| Tree | max-mac | |
| Range | 1 to 256 | |
| Default | 20 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
multi-access boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow multiple access points | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access multi-access boolean | |
| Tree | multi-access | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
policer reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Policer for ingress home traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext access policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 19.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of HLE | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
assistive-address-resolution boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA assists in address resolution | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext assistive-address-resolution boolean | |
| Tree | assistive-address-resolution | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
bd-mac-prefix string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Prefix of the HLE BD MAC address | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext bd-mac-prefix string | |
| Tree | bd-mac-prefix | |
| String Length | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
mac-translation boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Allow MAC address translation for HLE services | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext mac-translation boolean | |
| Tree | mac-translation | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
network
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Enter the network context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network | |
| Tree | network | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Administrative state of the HLE network | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
max-mac number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of allowed MAC entries on network side | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network max-mac number | |
| Tree | max-mac | |
| Range | 1 to 64 | |
| Default | 20 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
policer reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Policer for ingress data center traffic | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string vrgw lanext network policer reference | |
| Tree | policer | |
Reference | configure subscriber-mgmt isa-policer string | |
| Introduced | 19.7.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
xconnect
| Synopsis | Enter the xconnect context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect | |
| Tree | xconnect | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
accounting
| Synopsis | Enter the accounting context | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting | |
| Tree | accounting | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mobility-updates boolean
| Synopsis | Accounting updates triggered by mobility | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting mobility-updates boolean | |
| Tree | mobility-updates | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
policy reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA RADIUS accounting policy for cross-connected UEs | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting policy reference | |
| Tree | policy | |
Reference | configure aaa radius isa-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
update-interval number
| Synopsis | Time between successive interim accounting updates | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect accounting update-interval number | |
| Tree | update-interval | |
| Range | 5 to 259200 | |
| Units | minutes | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the cross-connect | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw vlan-range string xconnect admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ID of WLAN Gateway ISA group that gateway binds to | |
| Context | configure service vprn string subscriber-interface string group-interface string wlan-gw wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
wpp
| Synopsis | Enable the wpp context | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp | |
| Tree | wpp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WPP | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
initial
| Synopsis | Enter the initial context | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp initial | |
| Tree | initial | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
app-profile reference
| Synopsis | Initial application profile name | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp initial app-profile reference | |
| Tree | app-profile | |
Reference | configure application-assurance group number partition number policy app-profile string | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
sla-profile reference
| Synopsis | Initial SLA profile | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp initial sla-profile reference | |
| Tree | sla-profile | |
Reference | configure subscriber-mgmt sla-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sub-profile reference
| Synopsis | Initial subscriber profile | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp initial sub-profile reference | |
| Tree | sub-profile | |
Reference | configure subscriber-mgmt sub-profile string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time number
| Synopsis | Lease time | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp lease-time number | |
| Tree | lease-time | |
| Range | 10 to 315446399 | |
| Units | seconds | |
| Default | 600 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
portal
| Synopsis | Enter the portal context | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp portal | |
| Tree | portal | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
name string
| Synopsis | Web portal server name | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp portal name string | |
| Tree | name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
portal-group reference
| Synopsis | WPP portal group for this interface | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp portal portal-group reference | |
| Tree | portal-group | |
Reference | configure aaa wpp portal-group string | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-instance string
| Synopsis | Virtual router instance of WPP portal for interface | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp portal router-instance string | |
| Tree | router-instance | |
Notes | The following elements are part of a choice: portal-group or (name and router-instance). | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
restore-to-initial-on-disconnect boolean
| Synopsis | Restore initial profiles after a host has disconnected | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp restore-to-initial-on-disconnect boolean | |
| Tree | restore-to-initial-on-disconnect | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
triggered-hosts boolean
| Synopsis | Enable/disable triggered hosts | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp triggered-hosts boolean | |
| Tree | triggered-hosts | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
user-db reference
| Synopsis | User database | |
| Context | configure service vprn string subscriber-interface string group-interface string wpp user-db reference | |
| Tree | user-db | |
Reference | configure subscriber-mgmt local-user-db string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure service vprn string subscriber-interface string hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string subscriber-interface string hold-time ipv4 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activating the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string subscriber-interface string hold-time ipv4 down init-only boolean | |
| Tree | init-only | |
Description | This command applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string subscriber-interface string hold-time ipv4 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ipv6
down
| Synopsis | Enter the down context | |
| Context | configure service vprn string subscriber-interface string hold-time ipv6 down | |
| Tree | down | |
Description | Commands in this context configure the down hold timer, which specifies the delay before activation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface up, unless an operator configures the init-only command. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
init-only boolean
| Synopsis | Apply delay only at interface configuration or reboot | |
| Context | configure service vprn string subscriber-interface string hold-time ipv6 down init-only boolean | |
| Tree | init-only | |
Description | When configured to true, the system applies a delay only when the IP interface is first configured or after a system reboot. | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
up
| Synopsis | Enter the up context | |
| Context | configure service vprn string subscriber-interface string hold-time ipv6 up | |
| Tree | up | |
Description | Commands in this context configure the up hold timer, which specifies the delay before deactivation of the associated interface. The delay is invoked whenever the system attempts to bring the associated IP interface down. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
seconds number
ipoe-linking
| Synopsis | Enter the ipoe-linking context | |
| Context | configure service vprn string subscriber-interface string ipoe-linking | |
| Tree | ipoe-linking | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gratuitous-router-advertisement boolean
| Synopsis | Send unsolicited router advertisement after DHCP setup | |
| Context | configure service vprn string subscriber-interface string ipoe-linking gratuitous-router-advertisement boolean | |
| Tree | gratuitous-router-advertisement | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-session
| Synopsis | Enter the ipoe-session context | |
| Context | configure service vprn string subscriber-interface string ipoe-session | |
| Tree | ipoe-session | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum number of sessions on this group interface | |
| Context | configure service vprn string subscriber-interface string ipoe-session session-limit number | |
| Tree | session-limit | |
| Range | 1 to 500000 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string subscriber-interface string ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address [ipv4-address] string
[ipv4-address] string
gateway string
holdup-time number
| Synopsis | Wait time before accepting new state attribute | |
| Context | configure service vprn string subscriber-interface string ipv4 address string holdup-time number | |
| Tree | holdup-time | |
| Range | 100 to 5000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
populate-host-routes boolean
| Synopsis | Populate subscriber host routes in local FIB | |
| Context | configure service vprn string subscriber-interface string ipv4 address string populate-host-routes boolean | |
| Tree | populate-host-routes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-length number
| Synopsis | IPv4 address prefix length | |
| Context | configure service vprn string subscriber-interface string ipv4 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on this IP address | |
| Context | configure service vprn string subscriber-interface string ipv4 address string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-unmatching-subnets boolean
| Synopsis | Allow subscriber hosts without a matching subnet | |
| Context | configure service vprn string subscriber-interface string ipv4 allow-unmatching-subnets boolean | |
| Tree | allow-unmatching-subnets | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arp-host
admin-state keyword
| Synopsis | Administrative state of ARP hosts | |
| Context | configure service vprn string subscriber-interface string ipv4 arp-host admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R6 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-limit number
| Synopsis | Maximum number of ARP hosts | |
| Context | configure service vprn string subscriber-interface string ipv4 arp-host host-limit number | |
| Tree | host-limit | |
| Range | 1 to 524287 | |
| Introduced | 16.0.R6 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd
| Synopsis | Enter the bfd context | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd | |
| Tree | bfd | |
Description | Commands in this context configure the attributes of bidirectional forwarding detection (BFD) sessions that control the state of ESM dynamic BGP peers. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string subscriber-interface string ipv4 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
default-dns string
| Synopsis | Default DNS server addresses | |
| Context | configure service vprn string subscriber-interface string ipv4 default-dns string | |
| Tree | default-dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp
admin-state keyword
| Synopsis | Administrative state of DHCP | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Enable PPPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
gi-address string
| Synopsis | GI address for the DHCP relay | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp gi-address string | |
| Tree | gi-address | |
Description | This command configures the GI address to distinguish between the different subscriber interfaces (and potentially group interfaces) defined when the router functions as a DHCP relay. By default, the GI address used in the relayed DHCP packet is the primary IP address of a normal IES interface. Specifying the GI address allows the user to choose a secondary address. For group interfaces, a GI address must be specified under the group interface DHCP context or subscriber interface DHCP context for DHCP to function. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-populate
| Synopsis | Enter the lease-populate context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp lease-populate | |
| Tree | lease-populate | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-leases number
| Synopsis | Maximum number of DHCPv4 leases | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp lease-populate max-leases number | |
| Tree | max-leases | |
| Range | 0 to 511999 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
offer-selection
| Synopsis | Enter the offer-selection context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection | |
| Tree | offer-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection client-mac discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages from the specified MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Offer selection | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection client-mac mac-address keyword | |
| Tree | mac-address | |
Description | This command specifies the client MAC addresses for which the Discover delay applies. | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay sending DHCP Discover messages. The delay is applied to all DHCP Discover messages for which no per DHCP server or per client MAC delay is configured. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv4-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv4-address] string
| Synopsis | IP address of the DHCP server | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
discover-delay number
| Synopsis | Delay before sending DHCP Discover messages | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp offer-selection server string discover-delay number | |
| Tree | discover-delay | |
Description | This command configures the time to delay DHCP Discover messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
option-82
| Synopsis | Enter the option-82 context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 | |
| Tree | option-82 | |
Description | Commands in this context configure the processing required when the router receives a DHCP request that already has an Option 82 field in the packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
vendor-specific-option
| Synopsis | Enter the vendor-specific-option context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option | |
| Tree | vendor-specific-option | |
Description | Commands in this context configure the Nokia Vendor-Specific Option (VSO) of the DHCP packet. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac-address boolean
| Synopsis | Send the MAC address in the VSO | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option client-mac-address boolean | |
| Tree | client-mac-address | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
sap-id boolean
| Synopsis | Send SAP ID in the sub-option of the DHCP relay packet | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option sap-id boolean | |
| Tree | sap-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
service-id boolean
| Synopsis | Send the service ID in the Vendor Specific Option | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option service-id boolean | |
| Tree | service-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
string string
| Synopsis | User-defined ASCII string for the VSO | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option string string | |
| Tree | string | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
system-id boolean
| Synopsis | Send the system ID in the VSO | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp option-82 vendor-specific-option system-id boolean | |
| Tree | system-id | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCP proxy server | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
emulated-server string
| Synopsis | IP address used as DHCP server address in SAP context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server emulated-server string | |
| Tree | emulated-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-time
| Synopsis | Enter the lease-time context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server lease-time | |
| Tree | lease-time | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
radius-override boolean
| Synopsis | Use lease time information provided by RADIUS server | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server lease-time radius-override boolean | |
| Tree | radius-override | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | DHCP lease time | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp proxy-server lease-time value number | |
| Tree | value | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay-proxy
| Synopsis | Enable the relay-proxy context | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp relay-proxy | |
| Tree | relay-proxy | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-update-src-ip boolean
| Synopsis | Update the source IP address of a DHCP RELEASE message | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp relay-proxy release-update-src-ip boolean | |
| Tree | release-update-src-ip | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
siaddr-override string
| Synopsis | DHCP server IP address for address hiding function | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp relay-proxy siaddr-override string | |
| Tree | siaddr-override | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
release-include-gi-address boolean
| Synopsis | Include the GI address in DHCP relay messages | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp release-include-gi-address boolean | |
| Tree | release-include-gi-address | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
src-ip-addr keyword
| Synopsis | Type of source address to use for DHCP relay | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp src-ip-addr keyword | |
| Tree | src-ip-addr | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
virtual-subnet boolean
| Synopsis | Enable a virtual subnet for DHCPv4 hosts | |
| Context | configure service vprn string subscriber-interface string ipv4 dhcp virtual-subnet boolean | |
| Tree | virtual-subnet | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
export-host-routes boolean
| Synopsis | Allow export of subscriber management host routes | |
| Context | configure service vprn string subscriber-interface string ipv4 export-host-routes boolean | |
| Tree | export-host-routes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
unnumbered
| Synopsis | Enter the unnumbered context | |
| Context | configure service vprn string subscriber-interface string ipv4 unnumbered | |
| Tree | unnumbered | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-address string
| Synopsis | IP address for the subscriber interface | |
| Context | configure service vprn string subscriber-interface string ipv4 unnumbered ip-address string | |
| Tree | ip-address | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ip-int-name string
| Synopsis | Interface name from which an IPv4 addressed is borrowed | |
| Context | configure service vprn string subscriber-interface string ipv4 unnumbered ip-int-name string | |
| Tree | ip-int-name | |
| String Length | 1 to 32 | |
Notes | The following elements are part of a choice: ip-address or ip-int-name. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enable the ipv6 context | |
| Context | configure service vprn string subscriber-interface string ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address [ipv6-address] string
[ipv6-address] string
host-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Host type for subscriber interface prefixes | |
| Context | configure service vprn string subscriber-interface string ipv6 address string host-type keyword | |
| Tree | host-type | |
| Options | pd – IPv6 ESM hosts for DHCPv6 prefix-delegation wan – ESM hosts for DHCPv6 addresses or by WAN interface pd-wan – Both prefix-delegation and ESM hosts | |
| Default | pd | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
prefix-length number
| Synopsis | IPv6 address prefix length | |
| Context | configure service vprn string subscriber-interface string ipv6 address string prefix-length number | |
| Tree | prefix-length | |
| Range | 0 to 128 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-multiple-wan-addresses boolean
| Synopsis | Allow multiple WAN addresses | |
| Context | configure service vprn string subscriber-interface string ipv6 allow-multiple-wan-addresses boolean | |
| Tree | allow-multiple-wan-addresses | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
allow-unmatching-prefixes boolean
| Synopsis | Allow subscriber hosts without a matching prefix | |
| Context | configure service vprn string subscriber-interface string ipv6 allow-unmatching-prefixes boolean | |
| Tree | allow-unmatching-prefixes | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
bfd
| Synopsis | Enter the bfd context | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd | |
| Tree | bfd | |
Description | Commands in this context configure the attributes of bidirectional forwarding detection (BFD) sessions that control the state of ESM dynamic BGP peers. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of BFD sessions | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
echo-receive number
| Synopsis | Minimum echo interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd echo-receive number | |
| Tree | echo-receive | |
| Range | 100 to 100000 | |
| Units | milliseconds | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multiplier number
| Synopsis | Number of consecutive BFD messages missed from the peer | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd multiplier number | |
| Tree | multiplier | |
Description | This command configures the number of missed messages before the BFD session state is changed to down and the upper-level protocol is notified of the fault. A multiplier of less than 3 should not be used in production environments. | |
| Range | 1 to 20 | |
| Default | 3 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
receive number
| Synopsis | BFD receive interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd receive number | |
| Tree | receive | |
Description | This command specifies the receive interval for the BFD session. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
transmit-interval number
| Synopsis | BFD transmit interval over this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd transmit-interval number | |
| Tree | transmit-interval | |
Description | This command configures the transmit intervals. On the 7750 SR, this command can only be configured to a value less than 100 when the type command is configured to cpm-np. | |
| Range | 10 to 100000 | |
| Units | milliseconds | |
| Default | 100 | |
| Introduced | 21.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
type keyword
| Synopsis | Local termination point for the BFD session | |
| Context | configure service vprn string subscriber-interface string ipv6 bfd type keyword | |
| Tree | type | |
Description | This command sets the local termination point for the BFD session to allow for fast timers down to 10 ms granularity. The options to specify where the BFD session runs are:
| |
| Options | ||
| Default | auto | |
| Introduced | 21.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s |
default-dns string
| Synopsis | Default DNS server addresses | |
| Context | configure service vprn string subscriber-interface string ipv6 default-dns string | |
| Tree | default-dns | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
delegated-prefix-length (number | keyword)
| Synopsis | IPv6 delegated prefix length | |
| Context | configure service vprn string subscriber-interface string ipv6 delegated-prefix-length (number | keyword) | |
| Tree | delegated-prefix-length | |
| Range | 48 to 64 | |
| Options | ||
| Default | 64 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp6
override-slaac boolean
| Synopsis | Allow WAN address offered by DHCP to overwrite the WAN address acquired from SLAAC | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 override-slaac boolean | |
| Tree | override-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pd-managed-route
| Synopsis | Enable the pd-managed-route context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 pd-managed-route | |
| Tree | pd-managed-route | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
next-hop keyword
| Synopsis | Next hop type | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 pd-managed-route next-hop keyword | |
| Tree | next-hop | |
| Options | ||
| Default | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
proxy-server
| Synopsis | Enter the proxy-server context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server | |
| Tree | proxy-server | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 proxy server | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for prefix to remain preferred on this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rebind-timer number
| Synopsis | Rebind timer (T2) for this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server rebind-timer number | |
| Tree | rebind-timer | |
| Range | 0 to 1209600 | |
| Units | seconds | |
| Default | 2880 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
renew-timer number
| Synopsis | Renew timer (T1) | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server renew-timer number | |
| Tree | renew-timer | |
| Range | 0 to 604800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server-id
| Synopsis | Enter the server-id context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server server-id | |
| Tree | server-id | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-ascii string
| Synopsis | Vendor-assigned ID based on Enterprise Number (DUID-EN) | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-en-ascii string | |
| Tree | duid-en-ascii | |
| String Length | 1 to 58 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-en-hex string
| Synopsis | DUID system ID in hexadecimal format | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-en-hex string | |
| Tree | duid-en-hex | |
| String Length | 1 to 118 | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
duid-ll
| Synopsis | Use link-layer address (DUID-LL) as DUID | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server server-id duid-ll | |
| Tree | duid-ll | |
Notes | The following elements are part of a choice: duid-en-ascii, duid-en-hex, or duid-ll. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for prefix to remain valid on this interface | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 proxy-server valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 300 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
python-policy reference
| Synopsis | Python policy | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 python-policy reference | |
| Tree | python-policy | |
Reference | configure python python-policy string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
relay
admin-state keyword
| Synopsis | Administrative state of DHCPv6 Relay | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
advertise-selection
| Synopsis | Enter the advertise-selection context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection | |
| Tree | advertise-selection | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-mac
| Synopsis | Enter the client-mac context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection client-mac | |
| Tree | client-mac | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mac-address keyword
| Synopsis | Designated client MAC addresses for Advertise selection | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection client-mac mac-address keyword | |
| Tree | mac-address | |
| Options | ||
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection client-mac preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection client-mac solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent from the designated client MAC addresses. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server [ipv6-address] string
| Synopsis | Enter the server list instance | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | The following elements are part of a choice: client-mac or server. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[ipv6-address] string
| Synopsis | IP address of the DHCPv6 server | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection server string | |
| Tree | server | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preference-option
| Synopsis | Enter the preference-option context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection server string preference-option | |
| Tree | preference-option | |
Description | Commands in this context configure the DHCPv6 preference option that is inserted in the DHCPv6 Advertise message. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
value number
| Synopsis | Preference option value for DHCPv6 Advertise messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection server string preference-option value number | |
| Tree | value | |
| Range | 0 to 255 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection server string solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages sent to the server. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
solicit-delay number
| Synopsis | Delay before sending DHCPv6 Solicit messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay advertise-selection solicit-delay number | |
| Tree | solicit-delay | |
Description | This command configures the time to delay DHCPv6 Solicit messages. The delay is applied to DHCPv6 Solicit messages for which no overriding value is configured in the server instance or the client-mac context. | |
| Range | 1 to 100 | |
| Units | deciseconds | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcp boolean
| Synopsis | Enable IPoE clients to use DHCP relay or proxy server | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay client-applications dhcp boolean | |
| Tree | dhcp | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Allow PPPoE clients to use DHCP relay functionality | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
lease-split
| Synopsis | Enter the lease-split context | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay lease-split | |
| Tree | lease-split | |
Description | Commands in this context configure DHCPv6 lease split. DHCPv6 lease split is active when administratively enabled and for all IA_NA and IA_PD options in the transaction, the configured lease split valid lifetime (short lease time) is less than or equal to one of the following:
| |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of DHCPv6 lease split | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay lease-split admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime number
| Synopsis | DHCPv6 lease split valid lifetime (short lease time) | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay lease-split valid-lifetime number | |
| Tree | valid-lifetime | |
| Range | 300 to 315446399 | |
| Units | seconds | |
| Default | 3600 | |
| Introduced | 21.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | Link address for the DHCPv6 relay messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay link-address string | |
| Tree | link-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server string
| Synopsis | DHCP6 server(s) to which the DHCP6 requests are forwarded | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay server string | |
| Tree | server | |
| Max. Instances | 8 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
source-address string
| Synopsis | Source IPv6 address for the DHCPv6 relay messages | |
| Context | configure service vprn string subscriber-interface string ipv6 dhcp6 relay source-address string | |
| Tree | source-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-bridged-mode boolean
| Synopsis | Enable IPv6 IPoE bridged mode | |
| Context | configure service vprn string subscriber-interface string ipv6 ipoe-bridged-mode boolean | |
| Tree | ipoe-bridged-mode | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
link-local-address
| Synopsis | Enter the link-local-address context | |
| Context | configure service vprn string subscriber-interface string ipv6 link-local-address | |
| Tree | link-local-address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address string
| Synopsis | IPv6 link local address | |
| Context | configure service vprn string subscriber-interface string ipv6 link-local-address address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix [ipv6-prefix] string
[ipv6-prefix] string
holdup-time number
| Synopsis | Time to wait before route accepts new state attribute | |
| Context | configure service vprn string subscriber-interface string ipv6 prefix string holdup-time number | |
| Tree | holdup-time | |
| Range | 100 to 5000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
host-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Host type for subscriber interface prefixes | |
| Context | configure service vprn string subscriber-interface string ipv6 prefix string host-type keyword | |
| Tree | host-type | |
| Options | pd – IPv6 ESM hosts for DHCPv6 prefix-delegation wan – ESM hosts for DHCPv6 addresses or by WAN interface pd-wan – Both prefix-delegation and ESM hosts | |
| Default | pd | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
track-srrp number
| Synopsis | SRRP instance whose state is tracked on this IP address | |
| Context | configure service vprn string subscriber-interface string ipv6 prefix string track-srrp number | |
| Tree | track-srrp | |
| Range | 1 to 4294967295 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-advertisements
| Synopsis | Enter the router-advertisements context | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements | |
| Tree | router-advertisements | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of router advertisements | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
force-mcast keyword
| Synopsis | Protocol with forced multicast | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements force-mcast keyword | |
| Tree | force-mcast | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
max-advertisement-interval number
| Synopsis | Maximum advertisement interval | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 900 to 1800 | |
| Units | seconds | |
| Default | 1800 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
min-advertisement-interval number
| Synopsis | Minimum advertisement interval | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 900 to 1350 | |
| Units | seconds | |
| Default | 900 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
options
| Synopsis | Enter the options context | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options | |
| Tree | options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
current-hop-limit number
| Synopsis | Hop limit to be advertised | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options current-hop-limit number | |
| Tree | current-hop-limit | |
| Range | 0 to 255 | |
| Default | 64 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dns
| Synopsis | Enter the dns context | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options dns | |
| Tree | dns | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
include-rdnss boolean
| Synopsis | Include the RDNSS server option 25 | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options dns include-rdnss boolean | |
| Tree | include-rdnss | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
rdnss-lifetime (number | keyword)
| Synopsis | Maximum time for the RDNSS address to remain valid | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options dns rdnss-lifetime (number | keyword) | |
| Tree | rdnss-lifetime | |
| Range | 900 to 3600 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
managed-configuration boolean
| Synopsis | Managed address configuration flag | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options managed-configuration boolean | |
| Tree | managed-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mtu (number | keyword)
| Synopsis | Advertised MTU value | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options mtu (number | keyword) | |
| Tree | mtu | |
| Range | 1280 to 9212 | |
| Units | bytes | |
| Options | ||
| Default | not-included | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
other-stateful-configuration boolean
| Synopsis | Other stateful configuration flag | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options other-stateful-configuration boolean | |
| Tree | other-stateful-configuration | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
reachable-time number
| Synopsis | Reachable time for advertisements | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Units | milliseconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retransmit-timer number
| Synopsis | Retransmit time in router advertisements from interface | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options retransmit-timer number | |
| Tree | retransmit-timer | |
| Range | 0 to 1800000 | |
| Units | seconds | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-lifetime (number | keyword)
| Synopsis | Router lifetime | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements options router-lifetime (number | keyword) | |
| Tree | router-lifetime | |
| Range | 2700 to 9000 | |
| Units | seconds | |
| Options | ||
| Default | 4500 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
prefix-options
| Synopsis | Enter the prefix-options context | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements prefix-options | |
| Tree | prefix-options | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
autonomous boolean
| Synopsis | Value of the autonomous flag | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements prefix-options autonomous boolean | |
| Tree | autonomous | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
on-link boolean
| Synopsis | Assign the prefix to an interface on the specified link | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements prefix-options on-link boolean | |
| Tree | on-link | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
preferred-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain preferred | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements prefix-options preferred-lifetime (number | keyword) | |
| Tree | preferred-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 3600 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
valid-lifetime (number | keyword)
| Synopsis | Time for a prefix to remain valid | |
| Context | configure service vprn string subscriber-interface string ipv6 router-advertisements prefix-options valid-lifetime (number | keyword) | |
| Tree | valid-lifetime | |
| Range | 0 to 4294967294 | |
| Units | seconds | |
| Options | ||
| Default | 86400 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
router-solicit
| Synopsis | Enter the router-solicit context | |
| Context | configure service vprn string subscriber-interface string ipv6 router-solicit | |
| Tree | router-solicit | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
inactivity-timer (number | keyword)
| Synopsis | Time before an inactive host is removed | |
| Context | configure service vprn string subscriber-interface string ipv6 router-solicit inactivity-timer (number | keyword) | |
| Tree | inactivity-timer | |
| Range | 1 to 31536000 | |
| Units | seconds | |
| Options | ||
| Default | 300 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
local-address-assignment
| Synopsis | Enter the local-address-assignment context | |
| Context | configure service vprn string subscriber-interface string local-address-assignment | |
| Tree | local-address-assignment | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of Local Address Assignment | |
| Context | configure service vprn string subscriber-interface string local-address-assignment admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv4
| Synopsis | Enter the ipv4 context | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv4 | |
| Tree | ipv4 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv4 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp boolean
| Synopsis | Request local addresses for PPP IPCP hosts | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv4 client-applications ppp boolean | |
| Tree | ppp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
default-pool string
| Synopsis | Default pools | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv4 default-pool string | |
| Tree | default-pool | |
| String Length | 1 to 32 | |
| Max. Instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv4 server for local pools management | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv4 server reference | |
| Tree | server | |
Reference | configure service vprn string dhcp-server dhcpv4 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipv6
| Synopsis | Enter the ipv6 context | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 | |
| Tree | ipv6 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
client-applications
| Synopsis | Enter the client-applications context | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 client-applications | |
| Tree | client-applications | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-slaac boolean
| Synopsis | Request local addresses for IPoE SLAAC hosts | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 client-applications ipoe-slaac boolean | |
| Tree | ipoe-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ipoe-wan boolean
| Synopsis | Request local addresses for IPoE IA NA hosts | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 client-applications ipoe-wan boolean | |
| Tree | ipoe-wan | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ppp-slaac boolean
| Synopsis | Request local addresses for PPP SLAAC hosts | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 client-applications ppp-slaac boolean | |
| Tree | ppp-slaac | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
server reference
| Synopsis | Local DHCPv6 server for local pools management | |
| Context | configure service vprn string subscriber-interface string local-address-assignment ipv6 server reference | |
| Tree | server | |
Reference | configure service vprn string dhcp-server dhcpv6 string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pppoe
| Synopsis | Enter the pppoe context | |
| Context | configure service vprn string subscriber-interface string pppoe | |
| Tree | pppoe | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
description string
| Synopsis | Text description | |
| Context | configure service vprn string subscriber-interface string pppoe description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
session-limit number
| Synopsis | Maximum PPPoE sessions | |
| Context | configure service vprn string subscriber-interface string pppoe session-limit number | |
| Tree | session-limit | |
| Range | 1 to 333823 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
private-retail-subnets boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Export subnets to the forwarding service | |
| Context | configure service vprn string subscriber-interface string private-retail-subnets boolean | |
| Tree | private-retail-subnets | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wan-mode keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Mode of operation for hosts with /128 WAN IPv6 address | |
| Context | configure service vprn string subscriber-interface string wan-mode keyword | |
| Tree | wan-mode | |
| Options | ||
| Default | mode64 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw
| Synopsis | Enable the wlan-gw context | |
| Context | configure service vprn string subscriber-interface string wlan-gw | |
| Tree | wlan-gw | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-manager
| Synopsis | Enter the pool-manager context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager | |
| Tree | pool-manager | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcp6-client
| Synopsis | Enter the dhcp6-client context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client | |
| Tree | dhcp6-client | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
dhcpv4-nat
| Synopsis | Enter the dhcpv4-nat context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat | |
| Tree | dhcpv4-nat | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client dhcpv4-nat pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ia-na
| Synopsis | Enter the ia-na context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na | |
| Tree | ia-na | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client ia-na pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
lease-query
| Synopsis | Enable the lease-query context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client lease-query | |
| Tree | lease-query | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
max-retries number
| Synopsis | Retries before lease query assumes no allocated subnets | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client lease-query max-retries number | |
| Tree | max-retries | |
| Range | 0 to 10 | |
| Default | 2 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
servers string
| Synopsis | DHCPv6 servers that are used for requesting addresses | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client servers string | |
| Tree | servers | |
| Max. Instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
slaac
| Synopsis | Enter the slaac context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac | |
| Tree | slaac | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of the DHCPv6 client entity | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
link-address string
| Synopsis | IPv6 address in the link address field of relay header | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac link-address string | |
| Tree | link-address | |
| Default | :: | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
pool-name string
| Synopsis | Pool name to be sent in the DHCPv6 messages | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client slaac pool-name string | |
| Tree | pool-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
source-ip (keyword | ipv6-address)
| Synopsis | Source IP address that is used by the DHCPv6 client | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager dhcp6-client source-ip (keyword | ipv6-address) | |
| Tree | source-ip | |
| Options | ||
| Default | use-interface-ip | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
watermarks
| Synopsis | Enter the watermarks context | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager watermarks | |
| Tree | watermarks | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
high number
| Synopsis | High watermark when new prefix is allocated | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager watermarks high number | |
| Tree | high | |
| Range | 51 to 99 | |
| Default | 95 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
low number
| Synopsis | Low watermark when unused prefix is released | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager watermarks low number | |
| Tree | low | |
| Range | 50 to 98 | |
| Default | 90 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR, 7750 SR-e, 7750 SR-s, VSR |
wlan-gw-group reference
| Synopsis | ID of WLAN gateway group where prefixes are installed | |
| Context | configure service vprn string subscriber-interface string wlan-gw pool-manager wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
redundancy
| Synopsis | Enter the redundancy context | |
| Context | configure service vprn string subscriber-interface string wlan-gw redundancy | |
| Tree | redundancy | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of WLAN-GW redundancy | |
| Context | configure service vprn string subscriber-interface string wlan-gw redundancy admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
export string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Route to export to peer | |
| Context | configure service vprn string subscriber-interface string wlan-gw redundancy export string | |
| Tree | export | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
monitor string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Peer route to monitor | |
| Context | configure service vprn string subscriber-interface string wlan-gw redundancy monitor string | |
| Tree | monitor | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
subscriber-mgmt
| Synopsis | Enter the subscriber-mgmt context | |
| Context | configure service vprn string subscriber-mgmt | |
| Tree | subscriber-mgmt | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dhcpv4
| Synopsis | Enter the dhcpv4 context | |
| Context | configure service vprn string subscriber-mgmt dhcpv4 | |
| Tree | dhcpv4 | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
routed-subnet-transparent-forward boolean
| Synopsis | Transparently forward DHCPv4 from CPE LAN over IPoE | |
| Context | configure service vprn string subscriber-mgmt dhcpv4 routed-subnet-transparent-forward boolean | |
| Tree | routed-subnet-transparent-forward | |
Description | When configured to true, the router transparently forwards DHCPv4 packets received on a subscriber interface with a source IP in a routed subnet that is associated with a routed IPoE session or host. Supported routed subnets are:
When configured to false, the system disables transparent forwarding of DHCPv4 packets. | |
| Default | false | |
| Introduced | 23.3.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
multi-chassis-shunt-id number
| Synopsis | Shunt ID for a pair of resilient nodes | |
| Context | configure service vprn string subscriber-mgmt multi-chassis-shunt-id number | |
| Tree | multi-chassis-shunt-id | |
Description | This command configures the shunt ID that is used to shunt downstream traffic from a standby node to an active node. Because this ID identifies the traffic service on the standby node, the same ID must be configured per service on each node. This configuration is required for BNG CUPS inter-UPF resiliency shunting, but not for non-BNG CUPS shunting. However, when configured, it is also used for shunting non-BNG CUPS sessions in the same service. | |
| Range | 1 to 8191 | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
up-resiliency
| Synopsis | Enter the up-resiliency context | |
| Context | configure service vprn string subscriber-mgmt up-resiliency | |
| Tree | up-resiliency | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
monitor-oper-group [oper-group] reference
| Synopsis | Enter the monitor-oper-group list instance | |
| Context | configure service vprn string subscriber-mgmt up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | Commands in this context define parameters to derive the service health based on monitored operational groups. The BNG UPF sends the health value to the BNG CPF. The BNG CPF uses the value to determine the need for a BNG UPF status change (active or standby). Note: The following is only applicable for the configure service vpls capture-sap context.If the configured groups are not the same for all capture SAPs sharing the same underlying port or LAG, the configuration of a Layer 2 access ID alias is required, or else the system chooses arbitrarily one set of configured groups. | |
| Max. Instances | 2 | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
[oper-group] reference
| Synopsis | Operational group name | |
| Context | configure service vprn string subscriber-mgmt up-resiliency monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Notes | This element is part of a list key. | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
health-drop number
| Synopsis | Number subtracted from the health value per failure | |
| Context | configure service vprn string subscriber-mgmt up-resiliency monitor-oper-group reference health-drop number | |
| Tree | health-drop | |
Description | This command configures the drop in the health value for every operational group member failure. Every failure of an operational group member decreases the base health value to a possible minimum of 0. | |
| Range | 1 to 255 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ttl-propagate
| Synopsis | Enter the ttl-propagate context | |
| Context | configure service vprn string ttl-propagate | |
| Tree | ttl-propagate | |
| Introduced | 16.0.R1 | |
Platforms | All |
local keyword
| Synopsis | Local TTL propagation control for the VPRN | |
| Context | configure service vprn string ttl-propagate local keyword | |
| Tree | local | |
Description | This command specifies the local TTL propagation control for the VPRN and overrides the global configuration of the TTL propagation for locally generated packets that are forwarded over MPLS LSPs in a given VPRN service context. | |
| Options | ||
| Default | use-base | |
| Introduced | 16.0.R1 | |
Platforms | All |
transit keyword
| Synopsis | Transit TTL propagation control for the VPRN | |
| Context | configure service vprn string ttl-propagate transit keyword | |
| Tree | transit | |
Description | This command overrides the global configuration of the TTL propagation for in transit packets that are forwarded over MPLS LSPs in a given VPRN service context. | |
| Options | ||
| Default | use-base | |
| Introduced | 16.0.R1 | |
Platforms | All |
twamp-light
| Synopsis | Enter the twamp-light context | |
| Context | configure service vprn string twamp-light | |
| Tree | twamp-light | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reflector
| Synopsis | Enable the reflector context | |
| Context | configure service vprn string twamp-light reflector | |
| Tree | reflector | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
| Synopsis | Administrative state of TWAMP Light functionality | |
| Context | configure service vprn string twamp-light reflector admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
allow-ipv6-udp-checksum-zero boolean
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Process IPv6 packets with a zero UDP checksum | |
| Context | configure service vprn string twamp-light reflector allow-ipv6-udp-checksum-zero boolean | |
| Tree | allow-ipv6-udp-checksum-zero | |
Description | When configured to true, this command allows the processing of IPv6 packets that arrive with a UDP checksum of zero. The destination UDP ports that are registered as TWAMP Test packets as part of this template allow this behavior. When configured to false, IPv6 packets that arrive with a UDP checksum of zero are discarded. | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
description string
| Synopsis | Text description | |
| Context | configure service vprn string twamp-light reflector description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
prefix [ip-prefix] (ipv4-prefix | ipv6-prefix)
[ip-prefix] (ipv4-prefix | ipv6-prefix)
description string
| Synopsis | Text description | |
| Context | configure service vprn string twamp-light reflector prefix (ipv4-prefix | ipv6-prefix) description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
type keyword
| Synopsis | Processing behavior type for the reflector | |
| Context | configure service vprn string twamp-light reflector type keyword | |
| Tree | type | |
Description | This command configures the processing behavior of the TWAMP Light reflector. When the value is twamp-light the reflector does not check the received PDU as a traditional base TWAMP Light packet without TLV processing. When the value is stamp, the reflector attempts to find and process supported STAMP TLVs that follow the base STAMP packet. In mixed environments where different types of Session-Senders may be targeting a common TWAMP Light reflector, set the value to stamp. When the reflector is operating in stamp mode, the primary parsing is based on STAMP, checking and processing known TLVs, or determining if the arriving PDU is a TWAMP Light PDU. A Session-Sender launching a TWAMP Light-based packet must use all zeros padding pattern when the pad size is non zero. | |
| Options | ||
| Default | twamp-light | |
| Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
udp-port number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | UDP port on which the specified TWAMP-Light reflector listens for TWAMP PDUs | |
| Context | configure service vprn string twamp-light reflector udp-port number | |
| Tree | udp-port | |
| Range | 862 | 64364 to 64373 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS | |
video-interface [interface-name] string
| Synopsis | Enter the video-interface list instance | |
| Context | configure service vprn string video-interface string | |
| Tree | video-interface | |
| Max. Instances | 9 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[interface-name] string
| Synopsis | Video interface name | |
| Context | configure service vprn string video-interface string | |
| Tree | video-interface | |
| String Length | 1 to 29 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
accounting-policy reference
| Synopsis | Accounting Policy | |
| Context | configure service vprn string video-interface string accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
address [ip-address] string
| Synopsis | Add a list entry for address | |
| Context | configure service vprn string video-interface string address string | |
| Tree | address | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[ip-address] string
| Synopsis | IPv4 address for the video interface within the service | |
| Context | configure service vprn string video-interface string address string | |
| Tree | address | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
admin-state keyword
| Synopsis | Administrative state of the video interface | |
| Context | configure service vprn string video-interface string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
channel [mcast-address] string source string
[mcast-address] string
source string
channel-name string
| Synopsis | Channel name | |
| Context | configure service vprn string video-interface string channel string source string channel-name string | |
| Tree | channel-name | |
| String Length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
description string
| Synopsis | Text description | |
| Context | configure service vprn string video-interface string channel string source string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
scte35-action keyword
| Synopsis | Enable downstream forwarding of SCTE 35 cue avails | |
| Context | configure service vprn string video-interface string channel string source string scte35-action keyword | |
| Tree | scte35-action | |
| Options | ||
| Default | forward | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
zone-channel [zone-mcast-address] string zone-source string
| Synopsis | Enter the zone-channel list instance | |
| Context | configure service vprn string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
[zone-mcast-address] string
| Synopsis | Multicast zone channel address | |
| Context | configure service vprn string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
zone-source string
| Synopsis | Unicast source address | |
| Context | configure service vprn string video-interface string channel string source string zone-channel string zone-source string | |
| Tree | zone-channel | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
adi-channel-name string
| Synopsis | Zone channel name | |
| Context | configure service vprn string video-interface string channel string source string zone-channel string zone-source string adi-channel-name string | |
| Tree | adi-channel-name | |
| String Length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
cpu-protection reference
| Synopsis | CPU protection policy | |
| Context | configure service vprn string video-interface string cpu-protection reference | |
| Tree | cpu-protection | |
Reference | configure system security cpu-protection policy number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s |
description string
| Synopsis | Text description | |
| Context | configure service vprn string video-interface string description string | |
| Tree | description | |
| String Length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
multicast-service number
| Synopsis | Associated multicast service ID | |
| Context | configure service vprn string video-interface string multicast-service number | |
| Tree | multicast-service | |
| Range | 1 to 2147483647 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
output-format keyword
| Synopsis | Output format | |
| Context | configure service vprn string video-interface string output-format keyword | |
| Tree | output-format | |
| Options | ||
| Default | rtp-udp | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
video-sap
| Synopsis | Enable the video-sap context | |
| Context | configure service vprn string video-interface string video-sap | |
| Tree | video-sap | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
egress
filter
ip reference
qos
policy-name reference
| Synopsis | SAP egress QoS policy ID | |
| Context | configure service vprn string video-interface string video-sap egress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-egress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
ingress
filter
ip reference
qos
policy-name reference
| Synopsis | SAP ingress QoS policy ID | |
| Context | configure service vprn string video-interface string video-sap ingress qos policy-name reference | |
| Tree | policy-name | |
Reference | configure qos sap-ingress string | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s |
video-group-id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Video group ID | |
| Context | configure service vprn string video-interface string video-sap video-group-id reference | |
| Tree | video-group-id | |
Reference | configure isa video-group number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s | |
vprn-type keyword
vxlan
tunnel-termination [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Enter the tunnel-termination list instance | |
| Context | configure service vprn string vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-address] (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Non-system IP address that terminates the VXLAN | |
| Context | configure service vprn string vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | tunnel-termination | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fpe-id reference
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | FPE id for this entry | |
| Context | configure service vprn string vxlan tunnel-termination (ipv4-address-no-zone | ipv6-address-no-zone) fpe-id reference | |
| Tree | fpe-id | |
Reference | configure fwd-path-ext fpe number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
weighted-ecmp keyword
| Synopsis | Weighted load-balancing capability for ECMP routes | |
| Context | configure service vprn string weighted-ecmp keyword | |
| Tree | weighted-ecmp | |
| Options | ||
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
wlan-gw
distributed-subscriber-mgmt
| Synopsis | Enter the distributed-subscriber-mgmt context | |
| Context | configure service vprn string wlan-gw distributed-subscriber-mgmt | |
| Tree | distributed-subscriber-mgmt | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
ipv6-tcp-mss-adjust number
| Synopsis | TCP-MSS adjustment value in upstream direction for DSM | |
| Context | configure service vprn string wlan-gw distributed-subscriber-mgmt ipv6-tcp-mss-adjust number | |
| Tree | ipv6-tcp-mss-adjust | |
| Range | 160 to 10240 | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
mobility-triggered-accounting
| Synopsis | Enter the mobility-triggered-accounting context | |
| Context | configure service vprn string wlan-gw mobility-triggered-accounting | |
| Tree | mobility-triggered-accounting | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
admin-state keyword
| Synopsis | Administrative state of mobility triggered accounting | |
| Context | configure service vprn string wlan-gw mobility-triggered-accounting admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R4 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
hold-down number
include-counters boolean
| Synopsis | Include counters in interim updates | |
| Context | configure service vprn string wlan-gw mobility-triggered-accounting include-counters boolean | |
| Tree | include-counters | |
| Default | false | |
| Introduced | 16.0.R4 | |
|
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
xconnect
admin-state keyword
| Synopsis | Administrative state of the WLAN-GW cross-connect | |
| Context | configure service vprn string wlan-gw xconnect admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR |
tunnel-source-ip string
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 address and prefix for the tunnel source | |
| Context | configure service vprn string wlan-gw xconnect tunnel-source-ip string | |
| Tree | tunnel-source-ip | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
wlan-gw-group reference
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | ISA WLAN-GW Group | |
| Context | configure service vprn string wlan-gw xconnect wlan-gw-group reference | |
| Tree | wlan-gw-group | |
Reference | configure isa wlan-gw-group number | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR, 7750 SR-e, 7750 SR-s, VSR | |
wpp
admin-state keyword
| Synopsis | Administrative state of WPP | |
| Context | configure service vprn string wpp admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
portal [name] string
[name] string
ack-auth-retry-count number
| Synopsis | Number of retransmissions of an ACK_OUT message | |
| Context | configure service vprn string wpp portal string ack-auth-retry-count number | |
| Tree | ack-auth-retry-count | |
| Range | 0 to 5 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
address (ipv4-address-no-zone | ipv6-address-no-zone)
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | WPP portal address | |
| Context | configure service vprn string wpp portal string address (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR | |
admin-state keyword
| Synopsis | Administrative state of the WPP portal server | |
| Context | configure service vprn string wpp portal string admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
ntf-logout-retry-count number
| Synopsis | Number of retransmissions of an NTF_LOGOUT message | |
| Context | configure service vprn string wpp portal string ntf-logout-retry-count number | |
| Tree | ntf-logout-retry-count | |
| Range | 0 to 5 | |
| Default | 5 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
port-format keyword
| Synopsis | Format of the port in the ACK_INO message | |
| Context | configure service vprn string wpp portal string port-format keyword | |
| Tree | port-format | |
| Options | ||
| Default | standard | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
retry-interval number
| Synopsis | Time between two consecutive retransmissions | |
| Context | configure service vprn string wpp portal string retry-interval number | |
| Tree | retry-interval | |
| Range | 10 to 2000 | |
| Units | milliseconds | |
| Default | 2000 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |