c Commands

ca-profile

ca-profile

Syntax

ca-profile

ca-profile name [association]

Context

[Tree] (show certificate ca-profile)

Full Context

show certificate ca-profile

Description

This command shows certificate-authority profile information.

Parameters

name

Specifies the name of the Certificate Authority (CA) profile.

association

Displays associated CA profiles.

Platforms

All

cache

cache

Syntax

cache [peer ip-address] [group ip-address] [source ip-address] [originrp ip-address]

Context

[Tree] (clear>router>msdp cache)

Full Context

clear router msdp cache

Description

This command clears the MSDP cache.

Parameters

peer ip-address

Clears the cache of the IP address of the peer to which Multicast Source Discovery protocol (MSDP) source-active (SA) requests for groups matching this entry's group range were sent.

group ip-address

Clears the group IP address of the SA entry.

source ip-address

Clears the source IP address of the SA entry.

originrp ip-address

Clears the origin rendezvous point (RP) address type of the SA entry.

Platforms

All

cache

Syntax

cache aggregate {src-dst-proto | src-dst-proto-port} family {ipv4 | ipv6}

cache all family {ipv4 | ipv6}

Context

[Tree] (tools>dump>cflowd cache)

Full Context

tools dump cflowd cache

Description

This command displays the contents of the cflowd active cache. This information can be displayed either in raw form where every flow entry is displayed or in an aggregated form.

Tools Dump cflowd Cache Output Fields describes the cflowd cache output fields.

Table 1. Tools Dump cflowd Cache Output Fields

Label

Description

Proto/Protocol

Displays the IPv4 or IPv6 protocol type

Source Address/Src-IP

Displays the source IP address of the flow (IPv4 or IPv6)

Destination Address/Dst-IP

Displays the destination IP address of the flow (IPv4 or IPv6)

Intf/Ingr

Displays the ingress interface associated with the sampled flow (only displayed with the raw (all) output)

Intf/Egr

Displays the egress interface associated with the sampled flow (only displayed with the raw (all) output)

S-Port

Displays the source protocol port number

D-Port

Displays the destination protocol port number

Pkt-Cnt

Displays the total number of packets sampled for the associated flow

Byte-Cnt

Displays the total number of bytes of traffic sampled for the associated flow

Start-Time

Displays the system time when the first packet was sampled for the associated flow

Flags

Displays the IP flag value from the sampled IP flow header (only displayed with the raw (all) output)

ToS

Displays the ToS byte values from the sampled IP flow header (only displayed with the raw (all) output)

(Src) Mask

Displays the IP route mask for the route to the flow source IP address associated with the flow (only displayed with the raw (all) output)

(Dst) Mask

Displays the IP route mask for the route to the flow destination IP address associated with the flow (only displayed with the raw (all) output)

(Src) AS

Displays the ASN associated with the route to the flow source IP address associated with the flow (only displayed with the raw (all) output)

(Dst) AS

Displays the ASN associated with the route to the flow destination IP address associated with the flow (only displayed with the raw (all) output)

vRtr-ID

Displays the Virtual Router ID associated with the reported IP flow (only displayed with the raw (all) output)

Parameters

aggregate

Displays the aggregated active cache flow data.

Values

src-dst-proto — Aggregates the active flow cache based on the source and destination IP address and the IP protocol value.

src-dst-proto-port — Aggregates the active flow cache based on the source and destination IP address, IP protocol value, and the source and destination port numbers.

family

Specifies which IP address family flow data should be displayed.

Values

ipv4 — Displays the IPv4 flow data.

ipv6 — Displays the IPv6 flow data.

all

Displays the raw active cache flow data with no aggregation.

Platforms

All

cache-contents

cache-contents

Syntax

cache-contents [isa mda-id/esa-vm-id] url file-url

Context

[Tree] (tools>dump>app-assure>group>ipassist cache-contents)

Full Context

tools dump application-assurance group ip-identification-assist cache-contents

Description

This command dumps the cache contents generated by the IP identification assist feature into a local or remote destination.

Parameters

isa mda-id

Specifies the slot and MDA of the ISA in the format slot/mda.

Values

slot/mda

slot

1 to 10, depending on chassis model

mda

1 to 2, depending on chassis model

isa esa-vm-id

Specifies the ESA and ESA VM in the format esa-esa-id/vm-id.

Values

esa-esa-id/vm-id

esa-id

1 to 16

vm-id

1 to 4

url file-url
Specifies a local or remote destination to which the cache content output is directed.
Values

local-url | remote-url

local-url

[cflash-id/]file-path 200 characters maximum, including cflash-id

directory length 99 characters maximum each

remote-url

{ftp | tftp}://[login:pswd@]remote-locn/[ filepath]

255 characters maximum, filepath 199 characters maximum

remote-locn

{hostname | ipv4-address | "["ipv6-address"]" }[:port]

ipv4-address

a.b.c.d

ipv6-address

x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

x - [0 to FFFF]H

d - [0 to 255]D

interface - 32 characters maximum, for link local addresses

port

[0 to 65535]

cflash-id

cf1: | cf1-A: | cf1-B: | cf2: | cf2-A: | cf2-B: | cf3: | cf3-A: | cf3-B:

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

Use the following command to direct the cache contents generated by the IP identification assist feature to a remote destination.

tools dump application-assurance group 1 ip-identification-assist cache-contents isa 1/1 url ftp://exuser:expassword@192.0.2.1/tmp/sample-cache
Output Example
===============================================================================
Application-Assurance Group 1 ip-identification-assist cache contents
===============================================================================

Writing to file ftp://exuser:expassword@192.0.2.1/tmp/sample-cache_1_1.ip-ident-assist-cache ...

File closed

-rw-r--r-- 1 exuser exuser 16553 Aug 24 09:22 sample-cache_1_1.ip-ident-assist-cach

calculate-maps

calculate-maps

Syntax

calculate-maps router router-instance subscriber-type nat-sub-type prefix ip-prefix/length

Context

[Tree] (tools>perform>nat>deterministic calculate-maps)

Full Context

tools perform nat deterministic calculate-maps

Description

This command allows the operator to reveal the auto-mappings before they are created in the system, while the inside prefix is still out of service (in a shutdown administrative state). Based on the auto-mapping results, the user can decide to use the auto-mapping and operationalize the prefix (no shutdown command), or to use custom mappings.

The inside IP addresses for deterministic subscribers and for 1:1 protocol agnostic subscribers can be mapped to outside IP addresses in the following ways:

  • Automatically by the system. By enabling the deterministic prefix (no shutdown command), the system will automatically create map commands and sequentially map subscribers into outside IP address space.

  • Manually by the operator by configuring the map commands. This gives the operator control over mappings beyond the sequential auto-mapping.

Parameters

router-instance

Specifies the inside router name or VPRN service instance where the deterministic prefix resides.

Values

<router-name> | <vprn-svc-id>

router-name — "Base"

vprn-svc-id — 1 to 2147483647

nat-sub-type

Specifies the NAT subscriber type.

Values

classic-lsn-sub, dslite-lsn-sub

ip-prefix/length

Specifies the inside prefix containing IP addresses for which mapping is sought. The IP prefix is IPv4 family type for classic LSN subscriber and IPv6 family type for a DS-Lite subscriber.

Values

<ip-prefix/ip-prefix-length>

<ipv4-prefix>/<ipv4-prefix-length>

<ipv6-prefix>/<ipv6-prefix-length>

<ipv4-prefix>

a.b.c.d (host bits must be 0)

<ipv4-prefix-length>

0 to 32

<ipv6-prefix>

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

<ipv6-prefix-length>

[0 to 128]

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

call-trace

call-trace

Syntax

call-trace

Context

[Tree] (show call-trace)

Full Context

show call-trace

Description

Commands in this context display information related to the call-trace module.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

call-trace

Syntax

call-trace

Context

[Tree] (clear call-trace)

Full Context

clear call-trace

Description

This command clears call trace jobs.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

cam-utilization

cam-utilization

Syntax

cam-utilization [card slot-number]

Context

[Tree] (tools>dump>filter cam-utilization)

Full Context

tools dump filter cam-utilization

Description

This command, when used without parameters, specifies the utilization per CAM table for line card ACL filters per FP for FP4- and FP5-based cards in the system. Optionally, the card number can be provided as a parameter to limit the output to a single card.

Parameters

slot-number

Specifies the IOM slot number.

Values

1 to 10, A, B

Platforms

All

Output

The following output is an example of CAM utilization information for filters.

Output Example
*A:7750# tools dump filter cam-utilization
============================================
Filter Cam Utilization
============================================
Slot FP  Dir   Type       Cam Utilization %
--------------------------------------------
2    1   Ing   ip-mac                     0
2    1   Egr   ip-mac                   100
2    1   Ing   ipv6                       0
2    1   Egr   ipv6                       0
============================================

candidate

candidate

Syntax

candidate

Context

[Tree] (show>system candidate)

Full Context

show system candidate

Description

This command shows classic CLI candidate configuration information.

Note:

This command is not available in the MD-CLI. Use the MD-CLI info command in a configuration region.

Platforms

All

Output

The following output is an example of candidate information, and Candidate Output Fields describes the output fields.

Output Example
*A:bksim3107# show system candidate
===============================================================================
Candidate Config Information
===============================================================================
Candidate configuration state          : modified
Num editors/viewers                    : 0
Candidate cfg exclusive locked         : no
Last commit state                      : revert-failed
Last commit time                       : 10/23/2012 17:21:47
Checkpoint created with last commit    : yes
Scheduled revert time                  : N/A
Last commit revert time                : 10/23/2012 17:22:47

===============================================================================
Users in edit-cfg mode
===============================================================================
Username         Type (from)
===============================================================================
admin            Console
Joris            Telnet (192.0.2.239)
===============================================================================
Table 2. Candidate Output Fields

Label

Description

Candidate configuration state

• empty — indicates there are no uncommitted changes in the candidate config

• modified — indicates there are uncommitted changes in the candidate config

• unconfirmed — indicates there are no uncommitted changes in the candidate config but the result of the last commit will be auto-reverted unless it is confirmed before the timeout expires

Num editors/viewers

Displays the number of CLI sessions currently in edit-cfg mode

Candidate cfg exclusive locked

Indicates if a user has exclusively locked the candidate using the candidate edit exclusive command

Last commit state

• none — indicates there have been no commits since the last reboot of the node

• in-progress — indicates the system is currently committing the candidate config

• success — indicates the last commit finished successfully

• revert-pending — indicates the last commit finished successfully but has not been confirmed yet, and will be auto-reverted if it is not confirmed before the timeout expires

• failed — indicates the last commit failed and has been undone

• revert-in-progress — indicates the last commit finished successfully but was not confirmed in time and is currently being reverted

• reverted — indicates the last commit finished successfully but was not confirmed in time and has been reverted

• revert-failed — indicates the last commit finished successfully but was not confirmed in time and the system attempted to revert it but failed

Last commit time

Displays the time at which the last commit attempt was started

Checkpoint created with last commit

Indicates if a rollback checkpoint was created after the previous commit completed

Scheduled revert time

Indicates the currently scheduled auto-revert time based on the confirmed option being used with a candidate commit

Last commit revert time

Displays the time the commit was last reverted

Users in edit-cfg mode

Lists all the user sessions that are currently in edit-cfg mode

Type (from)

Indicates the type of session (such as Console, Telnet, and so on) and also the source of the session (such as the source IP address of the remote host)

capabilities

capabilities

Syntax

capabilities [system-id | lsp-id] [level level]

Context

[Tree] (show>router>isis capabilities)

Full Context

show router isis capabilities

Description

This command displays the IS-IS capability information.

Parameters

system-id

Only the LSPs related to the specified system-id are listed.

lsp-id

Only the specified LSP is listed.

level

Specifies the interface level (1, 2, or 1 and 2).

Platforms

All

Output

The following output is an example of IS-IS capability information, and IS-IS Capability Information Output Fields describes the output fields.

Output Example
*A:Dut-B# show router isis 0 capabilities
===============================================================================
Rtr Base ISIS Instance 0 Capabilities
===============================================================================
Displaying Level 1 capabilities
-------------------------------------------------------------------------------
LSP ID    : Dut-B.00-00
  Router Cap : 10.20.1.2, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 100
        Flags: M
LSP ID    : Dut-D.00-00
  Router Cap : 10.20.1.4, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 50
        Flags: M
Level (1) Capability Count : 2
Displaying Level 2 capabilities
LSP ID    : Dut-A.00-00
  Router Cap : 10.20.1.1, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
LSP ID    : Dut-B.00-00
  Router Cap : 10.20.1.2, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
    FAD Sub-Tlv:
        Flex-Algorithm   : 128
        Metric-Type      : delay
        Calculation-Type : 0
        Priority         : 100
        Flags: M
LSP ID    : Dut-C.00-00
  Router Cap : 10.20.1.3, D:0, S:0
    TE Node Cap : B E M  P
    SR Cap: IPv4 MPLS-IPv6
       SRGB Base:20000, Range:10001
    SR Alg: metric based SPF, 128
    Node MSD Cap: BMI : 12 ERLD : 15
Level (2) Capability Count : 3
===============================================================================
*A:Dut-B#
Table 3. IS-IS Capability Information Output Fields

Label

Description

Flex-Algorithm

The flexible algorithm number

Priority

Displays the FAD priority; It is the tiebreaker when multiple FADs are received

Metric Type

The metric used by the winning FAD

igp — the IGP metric is used

te-metric — the TE metric is used

delay — the delay metric is used

Calculation Type

Displays the calculation type; for SPF a zero value is only defined

Flags

Displays the FAD Flags; the M-flag is used for inter-area; when set, the metric must be used for inter-area traffic to avoid loops and blackhole traffic on ABR/ASBR

capabilities

Syntax

capabilities [router-id]

Context

[Tree] (show>router>ospf capabilities)

[Tree] (show>router>ospf3 capabilities)

Full Context

show router ospf capabilities

show router ospf3 capabilities

Description

This command displays the entries in the Router Information (RI) LSAs.

Parameters

router-id

Lists only the LSAs related to that router ID. If no router-id is specified, all database entries are listed.

Platforms

All

Output

OSPF Capabilities Output

The following table describes the standard and detailed command output fields for OSPF capabilities.

Output Example
*A:Dut-C# show router ospf capabilities 
===============================================================================
Rtr Base OSPFv2 Instance 0 Capabilities
===============================================================================
scope     Router Id           Capabilities    
-------------------------------------------------------------------------------
Area      10.20.1.2           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 22000 range 1001
Area      10.20.1.3           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 23030 range 71
Area      10.20.1.4           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 24000 range 1001
Area      10.20.1.5           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 25000 range 1001
Area      10.20.1.1           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 21000 range 1001
Area      10.20.1.2           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 22000 range 1001
Area      10.20.1.3           0x14: Stub P2P-VLAN 
                              SR Algorithm: IGP-metric-based-SPF
                              SR Label Range: start label 23030 range 71
-------------------------------------------------------------------------------
No. of LSAs: 7
===============================================================================

capture-sap

capture-sap

Syntax

capture-sap [statistics] sap-id

Context

[Tree] (show>service>id>dynsvc capture-sap)

Full Context

show service id dynamic-services capture-sap

Description

This command displays the status and statistics of a dynamic services capture. Statistics include counters for the number of data triggers received and data trigger drop reasons.

Note:

This command is not available in the MD-CLI.

Parameters

sap-id

Specifies the dynamic services capture SAP.

statistics

Displays data trigger receive and drop reason counters for this dynamic services capture SAP.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of capture SAP information.

Output Example
# show service id 10 dynamic-services capture-sap 1/1/1:10.* 
===============================================================================
Dynamic Services Capture SAP 1/1/1:10.*
===============================================================================
Dynamic services policy      : dyn-svc-1
Administrative state         : in-service
-------------------------------------------------------------------------------
Last Mgmt Change             : 01/20/2016 12:54:06
===============================================================================
# show service id 10 dynamic-services capture-sap 1/1/1:10.*  statistics
===============================================================================
Dynamic Services Capture SAP 1/1/1:10.* Statistics
===============================================================================
Data packets received by SAP                               : 0
-------------------------------------------------------------------------------
Drop Reason Counters
-------------------------------------------------------------------------------
No policy configured at capture SAP level                  : 0
No authentication configured in policy                     : 0
Data-trigger already exists                                : 0
Lockout is active                                          : 0
Reached data-trigger system limit                          : 0
No memory available                                        : 0
Unsuccessful authentication                                : 0
No data-trigger SAP-id in authentication                   : 0
Corresponding dynamic SAP is not created                   : 0
===============================================================================

Capture SAP Field Descriptions describes the Capture SAP policy fields.

Table 4. Capture SAP Field Descriptions

Counter

Description

Data packets received by SAP

The number of dynamic service data triggers received on the capture SAP that reached the CPM.

No policy configured at capture SAP level

There is no dynamic-services-policy configured at the capture SAP. This is required to determine the authentication destination.

No authentication configured in policy

The authentication section in the specified in dynamic services policy is missing or incomplete.

Data-trigger already exists

A new data trigger frame is received for an existing data trigger that is authenticated, but the corresponding dynamic SAP is not yet created. The new data trigger packet is dropped.

Lockout is active

The data trigger for this managed SAP is currently in a lockout state due to previous authentication failures.

Reached data-trigger system limit

The maximum number of dynamic service data triggers supported on the system is reached. Additional data triggers are dropped.

No memory available

There is not enough system memory available to process the data trigger.

Unsuccessful authentication

The authentication for a data trigger on this capture SAP failed or timed out.

No data-trigger SAP-id in authentication

The dynamic services data trigger SAP ID is not provided in authentication. This is a mandatory parameter.

Corresponding dynamic SAP is not created

The data trigger successfully authenticated but the corresponding dynamic SAP was not created. This is typically caused by a dynamic services script error.

capture-sap

Syntax

capture-sap [statistics] sap-id

Context

[Tree] (clear>service>id>dynsvc capture-sap)

Full Context

clear service id dynamic-services capture-sap

Description

This command clears the dynamic services capture SAP control plane statistics (data triggers received and data trigger drop reason counters).

Parameters

statistics

Clears the data trigger statistics for a capture SAP.

sap-id

Specifies the dynamic services capture SAP.

Values

null

port-id | bundle-id | bpgrp-id | lag-id | aps-id | eth-sat-id

dot1q

port-id | bundle-id | bpgrp-id | lag-id | aps-id | pw-id | eth-sat-id:[qtag1 | cp-conn-prof-id]

qinq

port-id | bundle-id | bpgrp-id | lag-id | pw-id | eth-sat-id:[qtag1 cp-conn-prof-id].[qtag2 | cp-conn-prof-id]

cp

keyword

conn-prof-id

1 to 8000

cem

slot/mda/port.channel

ima-grp

bundle-id [:vpi/vci | vpi | vpi1.vpi2 | cp.conn-prof-id]

cp

keyword

conn-prof-id

1 to 8000

port-id

slot/mda/port[.channel]

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 128

eth-tunnel

eth-tunnel-id[:eth-tun-sap-id]

id

1 to 1024

eth-tun-sap-id

0 to 4094

lag-id

lag-id | lag-string

lag

keyword

id

1 to 800

string

23 characters max

pw-id

pw-id

pw

keyword

id

1 to 32767

qtag1

null | 0 to 4094

qtag2

* | null | 0 to 4094

tunnel-id

tunnel-id.private | public:tag

tunnel

keyword

id

1 to 16

tag

0 to 4094

eth-sat-id

esat-id/slot/port

esat

keyword

id

1 to 20

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

card

card

Syntax

card slot-number cpu [sample-period seconds]

card slot-number fp fp-number dist-cpu-protection

card slot-number fp fp-number [tap tap-number] ingress per-egress-fp-stats

card slot-number fp fp-number [tap tap-number] egress per-ingress-fp-stats

card slot-number fp fp-number policy-accounting

card slot-number memory-pools

card state

card [slot-number]

card [slot-number] detail

card slot-number fp fp-number fwd-engine drop-reason statistics

card slot-number fp fp-number ingress queue-group mode {access | network}

card slot-number [detail] fp fp-number ingress queue-group queue-group-name instance [instance-number] mode {access | network} [ statistics]

Context

[Tree] (show card)

Full Context

show card

Description

This command shows card information.

If no command line parameters are specified, a card summary for all cards is displayed.

Parameters

slot-number

Displays information for the specified card slot.

Values

Depending on the chassis model, IOM/XCM slots are numbered from 1 to 10. CPM slots are A, B. The 7950 XRS has additional slots C, D (upper or lowercase). SFM slots are not addressed as cards. See the show sfm command.

cpu

Displays CPU utilization.

seconds

Displays the number of seconds over which to sample CPU task utilization.

Values

1 to 300

fp-number

Displays information for the specified forwarding plane.

Values

1 to 8

dist-cpu-protection

Displays the distributed CPU protection information.

policy-accounting

Displays the policy accounting information.

memory-pools

Displays the memory pools for the card.

state

Displays provisioned and equipped card and MDA information.

detail

Displays detailed card information.

fwd-engine

Displays forwarding engine information.

drop-reason

Displays drop reason information.

statistics

Displays statistics information.

ingress

Specifies statistics are ingress related.

egress

Specifies statistics are egress related.

tap-number

Displays the source TAP number.

Values

1 to 2

per-egress-fp-stats

Displays packet and octet statistics for unicast traffic sent from the specified FP to each destination FP. Only supported on 7750 SR-1 and 7750 SR-s platforms.

per-ingress-fp-stats

Displays packet and octet statistics for unicast traffic received by the specified FP from each source FP. Only supported on 7750 SR-1 and 7750 SR-s platforms.

queue-group

Displays queue group information.

mode

Specifies the mode in which the card will operate.

access

Displays information for the queue groups related to access mode.

network

Displays information for the queue groups related to network mode.

Platforms

All

Output

See the following sections for output examples:

Output Example: show card (showing the 7750 SR-12)
*A:Dut-A# show card 
===============================================================================
Card Summary
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State         
-------------------------------------------------------------------------------
6         iom4-e                                   up    up            
7         iom4-e                                   up    up            
8         iom4-e-hs                                up    up            
9         iom4-e                                   up    up            
A         cpm5                                     up    up/active     
B         cpm5                                     up    up/standby    
===============================================================================
Output Example: show card (showing the 7950 XRS-40)
A:Dut-A#   show card 
===============================================================================
Card Summary
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State         
-------------------------------------------------------------------------------
1      xcm-x20                                     up    up            
2      xcm-x20                                     up    up            
A      cpm-x20                                     up    up/active     
B      cpm-x20                                     up    up/standby    
C      cpm-x20                                     up    down/ext-stby 
D      cpm-x20                                     up    up/ext-actv   
===============================================================================
Output Fields: show card

Output Field: show card describes the output fields for the show card command.

Table 5. Output Field: show card

Label

Description

Slot

The slot number of the card in the chassis.

Provisioned Type

The card type that is configured for the slot.

Note: CPMs C and D do not appear in the summary unless the Chassis Topology is Extended (for the 7950 XRS-40).

Equipped Type

The card type that is actually populated in the slot.

Note: CPMs C and D do not appear in the summary unless the Chassis Topology is Extended (for the7950 XRS-40).

Admin State

Up — The card is administratively up.

Down — The card is administratively down.

Operational State

Up — The card is operationally up.

Down — The card is operationally down.

active — The CPM is the Active CPM for the system (actively managing the system components, processing various protocols, and so on).

standby — The CPM is the Standby CPM. The standby is hot synchronized with the Active CPM.

ext-actv — The CPM is operating in an Extension role in a 7950 XRS-40 system and is the active extension CPM for the chassis in which it sits.

ext-stby — The CPM is operating in an Extension role in a 7950 XRS-40 system and is the standby extension CPM for the chassis in which it sits.

Comments

Active — Indicates if the CPM is the active state.

Standby — Indicates if the CPM is the standby state.

No SFM — Indicates no SFM is online that is usable by this card.

Pwr Save — Indicates if the card is in power save mode.

Lo Power — Indicates if the card is in low power mode. It is prevented from booting by power management.

SFM Test — Indicates card is being held in booting because a B2B standalone SFM inter-connect test is in progress.

No MDA — Indicates the card is waiting for MDAs. MDAs are either missing or failed.

Output Example: show card state (showing 7750 SR-12 Chassis)
*A:Dut-A# show card state
===============================================================================
Card State
===============================================================================
Slot/  Provisioned Type                  Admin Operational   Num   Num Comments
Id         Equipped Type (if different)  State State         Ports MDA 
-------------------------------------------------------------------------------
6      iom4-e                            up    up                  2   
6/1    me40-1gb-csfp                     up    up            40        
6/2    me40-1gb-csfp                     up    up            40        
7      iom4-e                            up    up                  2   
7/1    me40-1gb-csfp                     up    up            40        
8      iom4-e-hs                         up    up                  2   
8/1    me12-10/1gb-sfp+                  up    up            12        
8/2    me40-1gb-csfp                     up    up            40        
9      iom4-e                            up    up                  2   
9/1    me12-10/1gb-sfp+                  up    up            12        
9/2    me12-10/1gb-sfp+                  up    up            12        
A      cpm5                              up    up                      Active
B      cpm5                              up    up                      Standby
===============================================================================
Output Example: show card state (showing 7750 SR-14s Chassis)
A:Dut-O# show card state 
===============================================================================
Card State
===============================================================================
Slot/  Provisioned Type                  Admin Operational   Num   Num Comments
Id         Equipped Type (if different)  State State         Ports MDA 
-------------------------------------------------------------------------------
1      xcm-14s                           up    up                  2   
1/1    s18-100gb-qsfp28:he1200g+         up    up            18        
1/x2   iom-s-3.0t:he3000g+               up    up                       
1/x2/1 ms18-100gb-qsfp28                 up    up            18        
1/x2/2 ms4-400g-qsfpdd+4-100g-qsfp28     up    up            8         
2      xcm-14s                           up    up                  2   
2/x1   iom-s-3.0t:he3000g+               up    up                      
2/x1/1 ms6-200gb-cfp2-dco                up    up            6         
6      xcm-14s                           up    up                  2   
6/1    s36-400gb-qsfpdd:he4800g+         up    up            36        
6/2    s36-100gb-qsfp28:he2400g+         up    up            36        
A      cpm-s                             up    up                      Active
B      cpm-s                             up    up                      Standby
===============================================================================
Output Example: show card state (showing 7450 ESS-12 Chassis)
A:Dut-B# show card state  
===============================================================================
Card State
===============================================================================
Slot/  Provisioned Type                  Admin Operational   Num   Num Comments
Id         Equipped Type (if different)  State State         Ports MDA 
-------------------------------------------------------------------------------
6      imm-1pac-fp3                      up    up                  1   
6/1    p1-100g-cfp                       up    up            1         
7      imm-2pac-fp3                      up    up                  2   
7/2    p20-1gb-sfp                       up    up            20        
8      imm-2pac-fp3                      up    up                  2   
8/1    isa2-bb                           up    up            7         
           p-isa2-ms
8/2    p3-40g-qsfp                       up    up            3         
A      cpm5                              up    up                      Active
B      cpm5                              up    up                      Standby
===============================================================================
Output Example: show card state (showing a 7950 XRS Chassis)
A:Dut-A# show card state 
===============================================================================
Card State
===============================================================================
Slot/  Provisioned Type                  Admin Operational   Num   Num Comments
Id         Equipped Type (if different)  State State         Ports MDA 
-------------------------------------------------------------------------------
1      xcm-x20                           up    up                  2   
1/1    cx20-10g-sfp                      up    up            20        
1/2    cx20-10g-sfp                      up    up            20        
2      xcm-x20                           up    up                  2   
2/1    cx20-10g-sfp                      up    up            20        
A      cpm-x20                           up    up                      Active
B      cpm-x20                           up    up                      Standby
===============================================================================
Output Fields: show card state

Output Fields: show card state describes the output fields for the show card state command.

Table 6. Output Fields: show card state

Label

Description

Slot/MDA

The slot number of the card in the chassis.

Provisioned Type

The card type that is configured for the slot.

Equipped Type

The card type that is actually populated in the slot.

Admin State

Up — The card is administratively up.

Down — The card is administratively down.

Operational State

Up — The card is operationally up.

Provisioned — There is no card in the slot but it has been pre-configured.

Num Ports

The number of ports available on the MDA.

Num MDA

The number of MDAs installed.

Comments

Active — Indicates if the CPM is the active state.

Standby — Indicates if the CPM is the standby state.

No SFM — Indicates no SFM is online that is usable by this card.

Pwr Save — Indicates if the card is in power save mode.

Lo Power — Indicates if the card is in low power mode. It is prevented from booting by power management.

SFM Test — Indicates card is being held in booting because a B2B standalone SFM inter-connect test is in progress.

No MDA — Indicates the card is waiting for MDAs. MDAs are either missing or failed.

Output Example: show card <slot-number> detail (showing IOM5-e Card)
*A:Dut-A# show card 1 detail 
===============================================================================
Card 1
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State         
-------------------------------------------------------------------------------
1         iom5-e:he1200g+                          up    up            
IOM Card Licensing Data
    Licensed Level                : he1200g+
    Description                   : 1.2T /w Agg to 2.4T, High Edge Routing
IOM Card Specific Data
    Clock source                  : none
    Fail On Error                 : Disabled
    Reset On Recoverable Error    : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 2
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    FP Resource Policy            : default
    Hw-Agg-Shaping QSets          : True
    Hw-Agg-Shaping QSet Size      : 4
    Hw-Agg-Shaping In Use         : saps
    Stable Pool Sizing            : False
    Ingress Buffer Pool Size      : 8257536 KB
    Egress Buffer Pool Size       : 8257536 KB
    Initial Extract Priority Mode : uniform
    HS Pool Policy                : None
    HS Fixed High Threshold Delta : default
    Generation                    : FP4
    Network ingress queue policy  : default
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE12332CARB01
    CLEI code                     : INUIAD3HAA
    Serial number                 : NS1936F7144
    Manufacture date              : 09082019
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0926-03
    Administrative state          : up
    Operational state             : up
    Temperature                   : 60C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-0.0.I6157 on Thu Jan 16 18:06:36 PST
                                    2020 by builder
    Software version              : TiMOS-I-21.2.B1-6 iom/hops64 Nokia 7750 SR
                                    Copyright (c) 2000-2021 Nokia.
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Fri Feb 5 18:15:30 PST 2021 by
                                    builder in /builds/c/212B/B1-6/panos/main/
                                    sros
    Time of last boot             : 2021/02/09 07:35:30
    Current alarm state           : alarm cleared
    Base MAC address              : 14:7b:ac:b4:b0:e1
    Firmware revision status      : acceptable
    Last bootup reason            : clear card
    Memory capacity               : 16,384 MB
===============================================================================
*A:Dut-A# 
Output Example: show card <slot-number> detail (showing XCM-20 Card)
A:bkvm20# show card 2 detail
===============================================================================
Card 2
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
2         xcm2-x20                                 up    provisioned
              (not equipped)
IOM Card Specific Data
    Clock source                  : none
    Fail On Error                 : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 0
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    FP Resource Policy            : default
    Stable Pool Sizing            : False
    Initial Extract Priority Mode : uniform
    Generation                    : FP4
    Network ingress queue policy  : default
FP 2 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    FP Resource Policy            : default
    Stable Pool Sizing            : False
    Initial Extract Priority Mode : uniform
    Generation                    : FP4
    Network ingress queue policy  : default
FP 3 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    FP Resource Policy            : default
    Stable Pool Sizing            : False
    Initial Extract Priority Mode : uniform
    Generation                    : FP4
    Network ingress queue policy  : default
Hardware Data
    Platform type                 : N/A
    Part number                   :
    CLEI code                     :
   Serial number                 :
    Manufacture date              :
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number :
    Administrative state          : up
    Operational state             : provisioned
    Software boot (rom) version   : (Not Specified)
    Software version              : (Not Specified)
    Time of last boot             : N/A
    Current alarm state           : alarm cleared
    Base MAC address              :
    Last bootup reason            :
    Memory capacity               : 0 MB
Hardware Resources (Power-Zone 1)
    Voltage
        Minimum                   :     0.00 Volts  (N/A)
        Current                   :     0.00 Volts
        Peak                      :     0.00 Volts  (N/A)
   Wattage
        Minimum                   :     0.00 Watts  (N/A)
        Current                   :     0.00 Watts
        Peak                      :     0.00 Watts  (N/A)
        Max Required              :   282.00 Watts
    Amperage
        Minimum                   :     0.00 Amps   (N/A)
        Current                   :     0.00 Amps
        Peak                      :     0.00 Amps   (N/A)
===============================================================================
A:bkvm20#
Output Fields: show card <slot-number> detail (for an IOM or XCM Card)

Output Fields: show card <slot-number> detail (for an IOM or XCM Card) describes the output fields for the show card detail command.

Table 7. Output Fields: show card <slot-number> detail (for an IOM or XCM Card)

Label

Description

Clock source

Source of clock for the IOM. Currently this parameter always displays "none”.

Available MDA slots

The number of MDA slots available on the IOM.

Installed MDAs

The number of MDAs installed on the IOM.

FP Resource Policy

The FP resource policy for the specified FP.

Initial Extract Priority Mode

The scheme used to select the initial drop priority of extracted control plane traffic.

uniform — Initializes the drop priority of all extracted control traffic as high priority.

l3-classify — Initializes the drop priority of all Layer 3 extracted control traffic (for example, BGP or OSPF) based on the QoS classification of the packets.

See "Classification-Based Priority for Extracted Protocol Traffic" in the7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide for more details.

Part number

The IOM part number.

CLEI code

The Common Language Location Identifier (CLLI) code string for the router.

Serial number

The serial number. Not user-modifiable.

Manufacture date

The chassis manufacture date. Not user-modifiable.

Manufacturing string

Factory-inputted manufacturing text string. Not user-modifiable.

Manufacturing deviations

Displays a record of changes by manufacturing to the hardware or software that is outside the normal revision control process.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Temperature

Internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Software boot version

The version of the boot image.

Software version

The software version number.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Base MAC address

Displays the base MAC address of the hardware component.

Memory capacity

Displays the memory capacity of the card.

Generation

Displays the FP generation of the assembly. N/A is displayed if there is no XMA installed in the card slot.

Comments

Active — Indicates if the CPM is the active state.

Standby — Indicates if the CPM is the standby state.

No SFM — Indicates no SFM is online that is usable by this card.

Pwr Save — Indicates if the card is in power save mode.

Lo Power — Indicates if the card is in low power mode. It is prevented from booting by power management.

SFM Test — Indicates card is being held in booting because a B2B standalone SFM inter-connect test is in progress.

No MDA — Indicates the card is waiting for MDAs. MDAs are either missing or failed.

Network ingress queue policy

Displays the name of the network ingress queue policy applied to the FP.

Output Example: show card <slot-number> detail (showing CPM5 Cards)
B:Dut-D# show card A detail
===============================================================================
Card A
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
A         cpm5                                     up    up/active
BOF last modified                 : N/A
Config file version               : FRI APR 12 01:08:10 2019 UTC
Config file last modified         : N/A
Config file last saved            : 2019/04/16 21:08:31
M/S clocking ref state            : primary
Flash - cf1:
    Administrative State          : up
    Operational state             : up
    Serial number                 : 20101124004146824682
    Firmware revision             : 20091110
    Model number                  : SMART CF
    Size                          : 3,907 MB
    Free space                    : 798,240 KB
    Percent Used                  : 80 %
Flash - cf2:
    Administrative State          : up
    Operational state             : up
    Serial number                 : 20101124004180EB80EB
    Firmware revision             : 20091110
    Model number                  : SMART CF
    Size                          : 3,907 MB
    Free space                    : 1,562 MB
    Percent Used                  : 59 %
Flash - cf3:
    Administrative State          : up
    Operational state             : up
    Serial number                 : 000060089160A700003F
    Firmware revision             : 110301a
    Model number                  : SFCF32GBH1BO4TO-I-NC-543-ALU
    Size                          : 31,248 MB
    Free space                    : 27,771 MB
    Percent Used                  : 11 %
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE08423AARC01
    CLEI code                     : IPUCBGZ1AA
    Serial number                 : NS155160462
    Manufacture date              : 12222015
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0553-05
    Administrative state          : up
    Operational state             : up
    Temperature                   : 51C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-13.0.R4 on Wed Jul 29 15:56:20 PDT 2015
                                    by builder
    Software version              : TiMOS-C-16.0.R6 cpm/hops64 Nokia 7750 SR
                                    Copyright (c) 2000-2019 Nokia.
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Wed Feb 27 14:42:05 PST 2019 by
                                    builder in /builds/c/160B/R6/panos/main
    Time of last boot             : 2019/04/15 09:31:29
    Current alarm state           : alarm cleared
    Base MAC address              : e4:81:84:81:ca:06
    Firmware revision status      : acceptable
    Memory capacity               : 16,384 MB
    System timing oscillator type : OCXO
    Secure boot status            : enabled
    UEFI variables status         : ok
==============================================================================
A:MLS2-SR164# show card "b" detail
===============================================================================
Card B
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
B         cpm5                                     up    up/standby
BOF last modified                 : N/A
Config file version               :
Config file last modified         : N/A
Config file last saved            : N/A
M/S clocking ref state            : secondary
Flash - cf1:
    Administrative State          : up
    Operational state             : not equipped
Flash - cf2:
    Administrative State          : up
    Operational state             : not equipped
Flash - cf3:
    Administrative State          : up
    Operational state             : up
    Serial number                 : 000060078551A1000397
    Firmware revision             : 110301a
    Model number                  : SFCF4096H1BO2TO-I-D1-543-ALU
    Size                          : 3,904 MB
    Free space                    : 1,135 MB
    Percent Used                  : 70 %
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE08423AARC01
    CLEI code                     : IPUCBGZ1AA
    Serial number                 : NS160164783
    Manufacture date              : 01172016
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0553-05
    Administrative state          : up
    Operational state             : up
    Temperature                   : 50C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-13.0.R4 on Wed Jul 29 15:56:20 PDT 2015
                                    by builder
    Software version              : TiMOS-C-16.0.R6 cpm/hops64 Nokia 7750 SR
                                    Copyright (c) 2000-2019 Nokia.
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Wed Feb 27 14:42:05 PST 2019 by
                                    builder in /builds/c/160B/R6/panos/main
    Time of last boot             : 2019/04/15 09:32:04
    Current alarm state           : alarm cleared
    Base MAC address              : e4:81:84:81:db:7c
    Firmware revision status      : acceptable
    Memory capacity               : 16,384 MB
    System timing oscillator type : OCXO
    Secure boot status            : enabled
    UEFI variables status         : ok
===============================================================================
Output Example: show card <slot-number> detail (showing CPM-x20 Cards)
*A:bksim3107# show card A detail
===============================================================================
Card A
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
A cpm-x20 up up/active

BOF last modified : 2013/05/15 12:33:22
Config file version : FRI MAR 08 13:24:58 2013 UTC
Config file last modified : 2013/05/15 12:34:22
Config file last saved : 2013/05/15 12:36:22
M/S clocking ref state : primary

Flash - cf1:
Administrative State : up
Operational state : up
Serial number : serial-1
Firmware revision : v1.0
Model number : PC HD 1
Size : 1,950 MB
Free space : 1,950 MB

Flash - cf2:
Administrative State : up
Operational state : up
Serial number : serial-2
Firmware revision : v1.0
Model number : PC HD 2
Size : 0 Bytes
Free space : 0 Bytes

Flash - cf3:
Administrative State : up
Operational state : up
Serial number : serial-3
Firmware revision : v1.0
Model number : PC HD 3
Size : 18,432 Bytes
Free space : 6,144 Bytes
Hardware Data
Platform type : 7950
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : card-11
Manufacture date : 01012003
Manufacturing deviations : Sim MfgDeviation card-11
Manufacturing assembly number : 01-2345-67
Administrative state : up
Operational state : up
Temperature : -1C
Temperature threshold : 75C
Software boot (rom) version : simulated
Software version : TiMOS-C-11.0.R2 cpm/i386 Nokia 7950 XRS*
Time of last boot : 2013/05/13 08:10:33
Current alarm state : alarm cleared
Base MAC address : ac:9f:0b:00:00:01
Memory capacity : 3,072 MB

Inter Chassis CPM Interconnect
CPM Interconnect Port 1
Oper State : up
SFF Status : operational

CPM Interconnect Port 2
...
* indicates that the corresponding row element may have been truncated.
===============================================================================

*A:Dut-A# show card D detail

===============================================================================
Card D
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State
-------------------------------------------------------------------------------
D      cpm-x20                                     up    up/ext-stby


BOF last modified                 : N/A
Config file version               :
Config file last modified         : N/A
Config file last saved            : N/A
M/S clocking ref state            : secondary

Flash - cf1:
    Administrative State          : up
    Operational state             : up
    Serial number                 : WE11K6300191
    Firmware revision             : 2.1ME
    Model number                  : WDC SSD-D0128S-7117
    Size                          : 122,089 MB
    Free space                    : 122,089 MB

Flash - cf2:
    Administrative State          : up
    Operational state             : not equipped

Flash - cf3:
    Administrative State          : up
    Operational state             : up
    Serial number                 :     SPG2012061404165
    Firmware revision             : 20101222
    Model number                  : SMART CF
    Size                          : 3,907 MB
    Free space                    : 3,802 MB

Hardware Data
    Platform type                 : 7950
    Part number                   : 3HE07116AARB01
    CLEI code                     : IPUCA9T1AA
    Serial number                 : NS13426D067
    Manufacture date              : 03162014
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0488-05
    Administrative state          : up
    Operational state             : up
    Temperature                   : 39C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-12.0.B1-120 on Wed Jul 16 18:55:26 PDT
                                    2014 by builder
    Software version              : TiMOS-C-12.0.B1-120 cpm/hops64 Nokia_7950 XRS
                                    7950 Copyright (c) 2000-2016 Nokia
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Wed Jul 16 19:26:12 PDT 2014 by
                                    builder in /rel12.0/b1/B1-120/panos/main
    Time of last boot             : 2014/07/17 13:41:28
    Current alarm state           : alarm cleared
    Base MAC address              : 00:d0:f6:f3:3c:9e
    Memory capacity               : 8,192 MB

Hardware Resources (Power-Zone 2)
    Voltage
        Minimum                   :    53.10 Volts  (07/17/2014 12:40:28)
        Current                   :    53.16 Volts
        Peak                      :    54.15 Volts  (07/17/2014 12:18:27)
    Wattage
        Minimum                   :   151.10 Watts  (07/17/2014 13:31:23)
        Current                   :   202.61 Watts
        Peak                      :   208.79 Watts  (07/17/2014 13:00:07)
        Max Required              :   204.00 Watts
    Amperage
        Minimum                   :     3.69 Amps   (07/17/2014 12:18:27)
        Current                   :     3.82 Amps
        Peak                      :     3.94 Amps   (07/17/2014 13:07:25)

Inter Chassis CPM Interconnect
    CPM Interconnect Port 1
        Oper State                : up
        SFF Status                : operational
    CPM Interconnect Port 2
        Oper State                : up
        SFF Status                : operational
===============================================================================
Output Fields: show card <slot-number> detail (for a CPM)

Output Fields: show card <slot-number> detail (for a CPM) describes the output fields for the show card detail command for a CPM card.

Table 8. Output Fields: show card <slot-number> detail (for a CPM)

Label

Description

Slot

The slot of the card in the chassis.

Card Provisioned

The CPM type that is configured for the slot. Note: CPMs C and D will not show up in the summary unless the Chassis Topology is Extended (XRS-40).

Card Equipped

The CPM type that is actually populated in the slot. Note: CPMs C and D will not show up in the summary unless the Chassis Topology is Extended (XRS-40).

Admin State

Up — The CPM is administratively up.

Down — The CPM is administratively down.

Operational State

Up — The CPM is operationally up.

Down — The CPM is operationally down.

Inter chassis cpm interconnect

Up — The CPM is operationally up.

Down — The CPM is operationally down.

BOF last modified

The date and time of the most recent BOF modification.

Config file version

The configuration file version.

Config file last modified

The date and time of the most recent config file modification.

Config file last modified

The date and time of the most recent config file modification.

Config file last saved

The date and time of the most recent config file save.

CPM card status

active — The card is acting as the primary (active) CPM in a redundant system.

standby — The card is acting as the standby (secondary) CPM in a redundant system.

Administrative state

Up — The CPM is administratively up.

Down — The CPM is administratively down.

Operational state

Up — The CPM is operationally up.

Down — The CPM is operationally down.

Serial number

The compact flash part number. Not user modifiable.

Firmware revision

The firmware version. Not user modifiable.

Model number

The compact flash model number. Not user modifiable.

Size

The amount of space available on the compact flash card.

Free space

The amount of space remaining on the compact flash card.

Part number

The CPM part number.

CLEI code

The code used to identify the router.

Serial number

The CPM part number. Not user modifiable.

Manufacture date

The chassis manufacture date. Not user modifiable.

Manufacturing string

Factory-set manufacturing text string. Not user modifiable.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Status

Displays the current status.

Temperature

Internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Software boot version

The version of the boot image.

Memory capacity

The total amount of memory.

Secure boot status

Status of the Secure Boot for this CPM.

enabled — Secure Boot is enabled

disabled — Secure Boot is disabled

UEFI variable status

Status of the Secure Boot UEFI variables for this CPM.

ok — no update required

update required — update is required

Comments

Active — Indicates if the CPM is the active state.

Standby — Indicates if the CPM is the standby state.

No SFM — Indicates no SFM is online that is usable by this card.

Pwr Save — Indicates if the card is in power save mode.

Lo Power — Indicates if the card is in low power mode. It is prevented from booting by power management.

SFM Test — Indicates card is being held in booting because a B2B standalone SFM inter-connect test is in progress.

No MDA — Indicates the card is waiting for MDAs. MDAs are either missing or failed.

Output Example: show card <slot-number> detail (showing IOM iwth license detail)

*A:bkvm18# show card 1 detail
===============================================================================
Card 1
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
1         iom5-e:he1200g+                          up    up
IOM Card Licensing Data
    Licensed Level                : he1200g+
    Description                   : 1.2T /w Agg to 2.4T, High Edge Routing
    Licensed Bandwidth Used       : 900 Gbps
IOM Card Specific Data
    Clock source                  : none
    Fail On Error                 : Disabled
    Reset On Recoverable Error    : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 0
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    FP Resource Policy            : default
    Stable Pool Sizing            : False
    Ingress Buffer Allocation     : 50.00
    Initial Extract Priority Mode : uniform
    HS Pool Policy                : None
    HS Fixed High Threshold Delta : default
    Generation                    : FP4
    Network ingress queue policy  : default
Hardware Data
    Platform type                 : N/A
    Part number                   :
    CLEI code                     :
    Serial number                 :
    Manufacture date              :
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number :
    Administrative state          : up
    Operational state             : provisioned
    Software boot (rom) version   : (Not Specified)
    Software version              : (Not Specified)
    Time of last boot             : N/A
    Current alarm state           : alarm cleared
    Base MAC address              :
    Last bootup reason            :
    Memory capacity               : 0 MB
Output Fields: show card <slot-number> detail (showing IOM with license level)

Output Fields: show card <slot-number> detail (showing IOM with license level) describes the output fields for the show card detail command with IOM licensing information.

Table 9. Output Fields: show card <slot-number> detail (showing IOM with license level)

Label

Description

Slot

The slot of the card in the chassis.

Provisioned Type

The IOM type and level that is configured for the slot.

Equipped Type (if different)

The IOM type and level that is actually populated in the slot if it is different than the Provisioned Type.

Admin State

Up — The IOM is administratively up.

Down — The IOM is administratively down.

Operational State

Up — The IOM is operationally up.

Down — The IOM is operationally down.

Licensed Level

License level of the card.

Description

Description of the license.

Licensed Bandwidth Used

The total connector bandwidth configured on the assembly.

Comments

Active — Indicates if the CPM is the active state.

Standby — Indicates if the CPM is the standby state.

No SFM — Indicates no SFM is online that is usable by this card.

Pwr Save — Indicates if the card is in power save mode.

Lo Power — Indicates if the card is in low power mode. It is prevented from booting by power management.

SFM Test — Indicates card is being held in booting because a B2B standalone SFM inter-connect test is in progress.

No MDA — Indicates the card is waiting for MDAs. MDAs are either missing or failed.

Output Example: show card <slot-number> fp fwd-engine drop-reason statistics
*A:cses-V93# show card 1 fp 1 fwd-engine drop-reason statistics
===============================================================================
Card 1 FP 1 Egress Forwarding Engine Drop Reason Statistics
===============================================================================
Egress Encapsulation Exceeded                          0
MTU Exceeded                                           0
Frame too big for port                                 4
===============================================================================
Output Fields: show card<slot-number> fp fwd-engine drop-reason statistics

Output Fields: show card slot-number fp fwd-engine drop-reason describes the output fields for the show card fp fwd-engine drop-reason command.

Table 10. Output Fields: show card slot-number fp fwd-engine drop-reason

Label

Description

Card

The card in the chassis.

FP

The egress forwarding plane hardware component.

Egress Encapsulation Exceeded

Addition of egress encapsulation headers would have exceeded the maximum frame size.

MTU Exceeded

Protocol supports packet fragmentation but fragmentation was blocked (for example, packet is IPv6 or packet is IPv4 and DF set to one).

Frame too big for port

Final check before transmitting has detected frame exceeded the port MTU.

Note:

A single frame can only result in one drop reason statistic being incremented.

Output Example: show card <slot-number> fp <fp-number> ingress per-egress-fp-stats
# show card 4 fp 5 ingress per-egress-fp-stats 
===============================================================================
Card 4 FP 5 TAP 1 (Ingress Per-Egress FP Statistics)
===============================================================================
To FP/TAP      Priority             Forwarded Packets     Forwarded Octets
-------------------------------------------------------------------------------
1 - 2/1        Expedite             0                     0
               Best-Effort          114919092             114919092000
4 - 5/1        Expedite             792                   788688
               Best-Effort          0                     0
A - 1/1        Expedite             5782                  2154196
               Best-Effort          0                     0
===============================================================================
===============================================================================
Card 4 FP 5 TAP 2 (Ingress Per-Egress FP Statistics)
===============================================================================
To FP/TAP      Priority             Forwarded Packets     Forwarded Octets
-------------------------------------------------------------------------------
1 - 2/1        Expedite             0                     0
               Best-Effort          114919195             114919195000
===============================================================================
Output Example: show card <slot-number> fp <fp-number> ingress per-egress-fp-stats tap <tap-number>
*A:Dut-A# show card 4 fp 5 ingress per-egress-fp-stats tap 1
===============================================================================
Card 4 FP 5 TAP 1 (Ingress Per-Egress FP Statistics)
===============================================================================
To FP/TAP      Priority             Forwarded Packets     Forwarded Octets
-------------------------------------------------------------------------------
1 - 2/1        Expedite             0                     0
               Best-Effort          115935212             115935212000
4 - 5/1        Expedite             792                   788688
               Best-Effort          0                     0
A - 1/1        Expedite             5816                  2169292
               Best-Effort          0                     0
===============================================================================
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-A# show card 4 fp 5 ingress per-egress-fp-stats tap 2
===============================================================================
Card 4 FP 5 TAP 2 (Ingress Per-Egress FP Statistics)
===============================================================================*
To FP/TAP      Priority             Forwarded Packets     Forwarded Octets
-------------------------------------------------------------------------------
1 - 2/1        Expedite             0                     0
               Best-Effort          115935316             115935316000
===============================================================================
Output Example: show card <slot-number> fp <fp-number> egress per-ingress-fp-stats
# show card 1 fp 1 egress per-ingress-fp-stats 
===============================================================================
Card 1 FP 1 TAP 1 Egress Per-Ingress FP Statistics
===============================================================================
To FP/TAP   Priority      Received Packets      Received Octets
-------------------------------------------------------------------------------
1 1/1       Expedite      172437                  2207203840
            Best-Effort   12345678                3160493568
1 2/1       Expedite      103446                  1324118016 
            Best-Effort   987654                  252839424
1 3/1       Expedite      6899108                 883085824 
            Best-Effort   11223344                2873176064 
1 4/1       Expedite      0                       0 
            Best-Effort   0                       0
2 1/1       Expedite      0                       0 
            Best-Effort   0                       0
2 2/2       Expedite      0                       0 
            Best-Effort   0                       0
-------------------------------------------------------------------------------
===============================================================================
Output Fields: show card <slot-number> fp <fp-number> ingress per-egress-fp-stats

Output Fields: egress and ingress card statistics per ingress or egress FP describes the output fields for the egress and ingress card statistics per ingress or egress FP.

Table 11. Output Fields: egress and ingress card statistics per ingress or egress FP

Label

Description

To FP/TAP

Displays the To forwarding plane TAP information.

Priority

Displays the priority (Best-Effort, Expedite, or Auto-Expedite).

Forwarded Packets

Displays the unicast packet statistics sent from the specified FP to the destination FP.

Forwarded Octets

Displays the unicast octet statistics sent from the specified FP to the destination FP.

card

Syntax

card slot-number

card slot-number fp fp-number hs-pool high-water-mark

card slot-number fp fp-number hs-pool high-water-mark mid-pool [value]

card slot-number fp fp-number hs-pool high-water-mark root-pool [value]

card slot-number fp fp-number hs-pool high-water-mark system

card slot-number fp fp-number dist-cpu-protection

card slot-number fp fp-number ingress per-egress-fp-stats

card slot-number fp fp-number egress per-ingress-fp-stats

card slot-number soft [hard-reset-unsupported-mdas]

card slot-number fp fp-number fwd-engine drop-reason statistics

card slot-number fp fp-number ingress mode {access | network} queue-group group-name instance instance statistics

Context

[Tree] (clear card)

Full Context

clear card

Description

This command re-initializes the card in the specified slot. A clear card command (without the soft) is referred to as a Hard Reset. A clear card x soft command (with the soft) is referred to as a Soft Reset.

Parameters

slot-number

Clears information for the specified card slot.

Values

1 to 20, A, B, C, D

fp-number

Displays information for the specified forwarding plane.

Values

1 to 8

high-water-mark

Clears the high water marks within the HS pool on the specified card and FP.

mid-pool

Clears the high water marks within the mid pools in the HS pool and on the specified card and FP.

Values

1 to 16

root-pool

Clears the high water marks within the root pools in the HS pool and on the specified card and FP.

Values

1 to 16

system

Clears the high water marks within the in the HS system pool and on the specified card and FP.

dist-cpu-protection

Clears the distributed CPU protection information.

soft

Issues a soft reset of the I/O module (IOM).

hard-reset-unsupported-mdas

Allows a soft reset operation when some of the MDA’s cannot perform a soft reset. A soft reset is performed on MDAs that support a soft reset and a hard reset is performed on MDAs that do not support soft resets.

fwd-engine

Specifies to clear the forwarding engine information.

drop-reason

Specifies to clear the drop reason information.

statistics

Specifies to clear the statistics.

ingress

Specifies to clear the ingress information.

egress

Specifies to clear the egress information.

per-egress-fp-stats

Specifies to clear packet and octet statistics for unicast traffic sent from the specified FP to each destination FP. Only supported on 7750 SR-1 and 7750 SR-s platforms.

per-ingress-fp-stats

Specifies to clear packet and octet statistics for unicast traffic received by the specified FP from each source FP. Only supported on 7750 SR-1 and 7750 SR-s platforms.

mode

Specifies the mode in which the card is to operate.

access

Specifies to clear the access mode information.

network

Specifies to clear the network mode information.

group-name

Specifies the group name, to a maximum of 32 characters.

instance

Specifies the instance of the named queue group to be cleared.

Values

1 to 65535

Platforms

All

card

Syntax

card slot-number fp fp-number queue-group queue-group-name instance instance-id [{access | network}] [{ingress | egress}] [arbiter {name | root}] [port port-id] [{detail | root-detail | thresholds | priority-info | depth}]

Context

[Tree] (show>qos>policer-hierarchy card)

Full Context

show qos policer-hierarchy card

Description

This command displays physical card related information.

Parameters

slot-number

Displays information about the slot number of the card in the chassis. The maximum slot number is platform dependent.

Values

1 to 10

fp-number

Displays information about the specified forwarding plane number.

Values

1

queue-group-name

Displays information about the specified queue group name, up to 32 characters.

instance-id

Displays information about the instance of the named queue group.

Values

1 to 65535

name

Displays information about the name of the QoS arbiter.

root

Displays information about the arbiter root.

port-id

Displays information about the specified port ID.

access

Displays policer-hierarchy statistics applied on an access port.

network

Displays policer-hierarchy statistics applied on a network port.

ingress

Displays ingress queue group information.

egress

Displays egress queue group information.

detail

Displays detailed information.

root-detail

Displays detailed information about the arbiter root.

thresholds

Displays the threshold, parenting, rate, and traffic information related to a policer.

priority-info

Displays the threshold information related to the root arbiter.

depth

Displays the bucket depth, parenting, rate, and traffic information related to a policer.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR

card

Syntax

card [slot-num]

card [slot-num] all

Context

[Tree] (tools>dump>resource-usage card)

Full Context

tools dump resource-usage card

Description

This command displays resource information for cards.

Parameters

slot-num

Specifies a card slot.

Values

1 to 10

all

Displays all available information for the card, including resource usage information for all child objects of the card such as FPs and MDAs.

Platforms

All

card

Syntax

card slot-number fp fp-number ingress {access | network} queue-group queue-group-name instance instance-id [absolute | percent-rate] [interval seconds] [repeat repeat] policer policer-id [reference-rate]

card slot-number fp fp-number ingress [tap tap-number] per-egress-fp-stats [interval seconds] [repeat repeat] [absolute | rate]

card slot-number fp fp-number [tap tap-number] egress per-ingress-fp-stats [interval seconds] [ repeat repeat] [absolute | rate]

Context

[Tree] (monitor card)

Full Context

monitor card

Description

This command monitors statistics in an ingress and egress Forwarding Plane (FP).

Parameters

slot-number

Monitors information on the specified card slot.

Values

1 to 20 (The maximum slot number is platform dependent)

fp-number

Monitors information on the specified FP.

Values

1 to 8

ingress

Monitors information on the ingress.

egress

Monitors information on the egress.

access

Displays policer statistics on the FP access.

network

Displays policer statistics on the FP network.

queue-group-name

Specifies the queue group name, up to 32 characters.

instance-id

Specifies the identification of a specific instance of the queue group.

Values

1 to 65535

absolute

Displays the raw statistics, without processing. No calculations are performed on the delta or rate statistics.

percent-rate

Displays the rate-per-second for each statistic based on the reference rate of 10G.

seconds

Specifies the interval for each display in seconds.

Values

11 to 60

Default

11

repeat

Specifies how many times the command is repeated.

Values

1 to 999

Default

10

policer-id

Must exist within the queue-group template applied to the ingress context of the forwarding plane.

Values

1 to 32

reference-rate

Displays the rate-per-second for each statistic as a percentage based on the reference rate specified.

Values

100M, 1G, 10G, 40G, 100G, 400G

Default

10G

tap-number

Specifies the source TAP.

Values

1 to 2

per-egress-fp-stats

Displays packet and octet statistics for unicast traffic sent from the specified FP to each destination FP.

per-ingress-fp-stats

Displays packet and octet statistics for unicast traffic received by the specified FP from each source FP.

rate

Displays the rate-per-second for each statistic instead of the delta.

Platforms

All

Output

See the following sections for output examples:

Output Example Ingress per-egress-fp-stats
# monitor card "4" fp 5 ingress per-egress-fp-stats
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       42659137          42659137000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3338              1054788              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       42659012          42659012000          
 
==============================================================================
At time t = 11 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375377           1375377000          
4 - 5/1     Expedite          0                 0                    
            Best-Effort       0                 0                    
A - 1/1     Expedite          46                20832                
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375605           1375605000          
Output Example Ingress per-egress-fp-stats rate
# monitor card "4" fp 5 ingress per-egress-fp-stats rate
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       45802801          45802801000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3444              1102780              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       45802905          45802905000          
 
==============================================================================
At time t = 11 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125039            125039364           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1921                0
            Best-Effort       0                 0                   0
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125039            125039273           1000
 
==============================================================================
At time t = 22 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124999            124999273           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1867                0
            Best-Effort       0                 0                   0
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124999            124999182           999
Output Example Ingress per-egress-fp-stats absolute
# monitor card "4" fp 5 ingress per-egress-fp-stats absolute
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       49729775          49729775000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3585              1163992              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       49729878          49729878000          
 
==============================================================================
At time t = 11 sec (Mode: Absolute)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       51104481          51104481000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3631              1184824              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       51104584          51104584000          
 
==============================================================================
At time t = 22 sec (Mode: Absolute)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       52479477          52479477000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3677              1206224              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       52479581          52479581000          
Output Example Ingress per-egress-fp-stats absolute tap
# monitor card "4" fp 5 ingress per-egress-fp-stats absolute tap 1
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       53893930          53893930000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3726              1227188              
            Best-Effort       0                 0                    
 
==============================================================================
At time t = 11 sec (Mode: Absolute)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       55269466          55269466000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3773              1248320              
            Best-Effort       0                 0                    
 

# monitor card "4" fp 5 ingress per-egress-fp-stats absolute tap 2
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       56153283          56153283000          
 
==============================================================================
At time t = 11 sec (Mode: Absolute)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       57528327          57528327000          
Output Example Ingress per-egress-fp-stats rate tap
# monitor card "4" fp 5 ingress per-egress-fp-stats rate tap 1    
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       59487961          59487961000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          3915              1312280              
            Best-Effort       0                 0                    
 
==============================================================================
At time t = 11 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125035            125034818           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1955                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 22 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124995            124994909           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1921                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 33 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124994            124993818           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1867                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 44 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125002            125001545           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1886                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 55 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124998            124998182           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1894                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 66 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125001            125000636           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1955                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 77 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124998            124998273           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1921                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 88 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125076            125075545           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1867                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 99 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       125039            125039091           1000
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1886                0
            Best-Effort       0                 0                   0
 
==============================================================================
At time t = 110 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124999            124998636           999
4 - 5/1     Expedite          0                 0                   0
            Best-Effort       0                 0                   0
A - 1/1     Expedite          4                 1894                0
            Best-Effort       0                 0                   0
 
==============================================================================


# monitor card "4" fp 5 ingress per-egress-fp-stats rate tap 2
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       84288530          84288530000          
 
==============================================================================
At time t = 11 sec (Mode: Rate)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets   Mbps
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                   0
            Best-Effort       124982            124981818           999
Output Example Ingress per-egress-fp-stats
# monitor card "4" fp 5 ingress per-egress-fp-stats            
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       90150683          90150683000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          4949              1778224              
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       90150787          90150787000          
 
==============================================================================
At time t = 11 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375025           1375025000          
4 - 5/1     Expedite          0                 0                    
            Best-Effort       0                 0                    
A - 1/1     Expedite          47                21132                
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375024           1375024000          
 
==============================================================================
At time t = 22 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375003           1375003000          
4 - 5/1     Expedite          0                 0                    
            Best-Effort       0                 0                    
A - 1/1     Expedite          45                20532                
            Best-Effort       0                 0                    
------------------------------------------------------------------------------
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375003           1375003000          
Output Example Ingress per-ingress-fp-stats tap
# monitor card "4" fp 5 ingress per-egress-fp-stats tap 1
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       93787778          93787778000          
4 - 5/1     Expedite          792               788688              
            Best-Effort       0                 0                    
A - 1/1     Expedite          5071              1833136              
            Best-Effort       0                 0                    
 
==============================================================================
At time t = 11 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 1 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375605           1375605000          
4 - 5/1     Expedite          0                 0                    
            Best-Effort       0                 0                    
A - 1/1     Expedite          47                20748                
            Best-Effort       0                 0    
                
# monitor card "4" fp 5 ingress per-egress-fp-stats tap 2
==============================================================================
==============================================================================
At time t = 0 sec (Base Statistics)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       96041192          96041192000          
 
==============================================================================
At time t = 11 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1374706           1374706000          
 
==============================================================================
At time t = 22 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1374960           1374960000          
 
==============================================================================
At time t = 33 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1374980           1374980000          
 
==============================================================================
At time t = 44 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375009           1375009000          
 
==============================================================================
At time t = 55 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375010           1375010000          
 
==============================================================================
At time t = 66 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1374987           1374987000          
 
==============================================================================
At time t = 77 sec (Mode: Delta)
==============================================================================
Card: 4 FP: 5 Tap: 2 (Ingress Per-Egress FP Statistics)
------------------------------------------------------------------------------
To FP/TAP   Priority          Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
1 - 2/1     Expedite          0                 0                    
            Best-Effort       1375005           1375005000 
Output Example Egress per-ingress-fp-stats interval repeat
*A:PE1# monitor card 1 fp 1 egress per-ingress-fp-stats interval 11 repeat 1
===============================================================================
Card 1 FP 1 TAP 1 Egress Per-Ingress FP Statistics
===============================================================================
To FP/TAP   Priority      Received Packets      Received Octets
-------------------------------------------------------------------------------
1 1/1       Expedite      172437                 2207203840
            Best-Effort   12345678               3160493568
1 2/1       Expedite      103446                 1324118016 
            Best-Effort   987654                 252839424
1 3/1       Expedite      6899108                883085824 
            Best-Effort   11223344               2873176064 
1 4/1       Expedite      0                      0 
            Best-Effort   0                      0
2 1/1       Expedite      0                      0 
            Best-Effort   0                      0
2 2/1       Expedite      0                      0 
            Best-Effort   0                      0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
1 1/1       Expedite      272437                 2232803840
            Best-Effort   12545678               3211693568
1 2/1       Expedite      403446                 1400918016
            Best-Effort   1387654                355239424
1 3/1       Expedite      7399108                1011085824
            Best-Effort   11823344               3026776064 
1 4/1       Expedite      0                      0 
            Best-Effort   0                      0
2 1/1       Expedite      0                      0 
            Best-Effort   0                      0
2 2/1       Expedite      0                      0 
            Best-Effort   0                      0
===============================================================================

Output Example Egress per-ingress-fp-stats interval repeat rate
#   monitor card 1 fp 1 egress per-ingress-fp-stats interval 11 repeat 1 rate
===============================================================================
Card 1 FP 1 TAP 1 Egress Per-Ingress FP Statistics
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
To FP/TAP   Priority      Received Packets      Received Octets
-------------------------------------------------------------------------------
1 1/1       Expedite      172437                 2207203840
            Best-Effort   12345678               3160493568
1 2/1       Expedite      103446                 1324118016 
            Best-Effort   987654                 252839424
1 3/1       Expedite      6899108                883085824 
            Best-Effort   11223344               2873176064 
1 4/1       Expedite      0                      0 
            Best-Effort   0                      0
2 1/1       Expedite      0                      0 
            Best-Effort   0                      0
2 2/1       Expedite      0                      0 
            Best-Effort   0                      0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Rate)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
To FP/TAP   Priority      Received Packets      Received Octets      Mbps
-------------------------------------------------------------------------------
1 1/1       Expedite      100000                 25600000              19
            Best-Effort   200000                 51200000              37
1 2/1       Expedite      300000                 76800000              56
            Best-Effort   400000                 102400000             74
1 3/1       Expedite      500000                 128000000             93
            Best-Effort   600000                 153600000             112
1 4/1       Expedite      0                      0 
            Best-Effort   0                      0
2 1/1       Expedite      0                      0 
            Best-Effort   0                      0
2 2/1       Expedite      0                      0 
            Best-Effort   0                      0
===============================================================================

card

Syntax

card slot-number fp fp-number queue-group queue-group-name instance instance-id [ingress] [access | networks] [interval seconds] [repeat repeat] [absolute | percent-rate [reference-rate]] [arbiter root | name]

Context

[Tree] (monitor>qos>arbiter-stats card)

Full Context

monitor qos arbiter-stats card

Description

This command monitors arbiter statistics in an ingress FP queue group.

Parameters

slot-number

Specifies the slot number associated with the queue group, expressed as an integer.

Values

1 to 20

fp-number

Specifies the FP number associated with the queue group, expressed as an integer.

Values

1 to 8

ingress

Displays policer statistics applied on the ingress FP.

access

Displays policer statistics on the FP access.

network

Displays policer statistics on the FP network.

queue-group-name

Specifies the name of the queue group up to 32 characters.

instance-id

Specifies the identification of a specific instance of the queue-group.

Values

1 to 65535

seconds

Configures the interval for each display in seconds.

Default

11 seconds

Values

11 to 60

repeat

Configures how many times the command is repeated.

Default

10

Values

1 to 999

absolute

When the absolute keyword is specified, the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.

percent-rate

When the percent-rate keyword is specified, the rate-per-second for each statistic is displayed based on the reference rate of 10G.

reference-rate

When a reference-rate value is specified, the rate-per-second for each statistic is displayed as a percentage based on the reference rate specified.

Values

100M, 1G, 10G, 40G, 100G, 400G

name

Specify the name of the policer control policy arbiter.

Values

An existing arbiter-name in the form of a string up to 32 characters, composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

root

Specifies the root arbiter.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR

card

Syntax

card slot-number fp fp-number ingress [access | network] queue-group queue-group-name [instance instance-id] [arbiter {name | root}]

Context

[Tree] (clear>qos>arbiter-stats card)

Full Context

clear qos arbiter-stats card

Description

This command clears arbiter statistics per card.

Parameters

slot-number

Specifies the slot number associated with the queue group.

Values

1 to 2 (7750 SR-2s)

1 to 5 (7750 SR-7)

1 to 6 (7750 SR-14s)

1 to 10 (7450 ESS, 7750 SR-12)

1 to 14 (VSR)

1 to 20 (7950 XRS, VSR)

fp-number

Specifies the FP number associated with the queue group.

Values

1 to 4

access

Clears policer statistics on the FP access.

network

Clears policer statistics on the FP network.

queue-group-name

Specifies the queue group name, up to 32 characters.

name

Specifies the arbiter name, up to 32 characters.

root

Specifies the arbiter root, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR

card

Syntax

card slot-number fp fp-number ingress [access | network] [queue-group queue-group-name] [instance instance-id] [arbiter name | root]

Context

[Tree] (show>qos>arbiter-stats card)

Full Context

show qos arbiter-stats card

Description

This command displays the arbiter statistics per card.

Parameters

slot-number

Displays information for the specified card slot.

Values

1 (7750 SR-1, VSR)

1 to 2 (7750 SR-2s)

1 to 5 (7750 SR-7)

1 to 6 (7750 SR-14s)

1 to 10 (7450 ESS, 7750 SR-12)

1 to 14 (VSR)

1 to 20 (7950 XRS, VSR)

fp-number

Specifies the FP number associated with the queue group.

Values

1

access

Displays arbiter statistics applied on an access port.

network

Displays arbiter statistics applied on a network port.

queue-group-name

Specifies the queue group name, up to 32 characters.

name

Specifies the arbiter name, up to 32 characters.

root

Specifies the arbiter root, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR

card

Syntax

card slot-number fp fp-number queue-group group-name instance instance-id {access | network} [detail] [ingress]

Context

[Tree] (show>qos>policer card)

Full Context

show qos policer card

Description

This command displays the policer statistics per card.

Parameters

slot-number

Displays information for the specified card slot.

Values

1 (7750 SR-1, VSR)

1 to 2 (7750 SR-2s)

1 to 5 (7750 SR-7)

1 to 6 (7750 SR-14s)

1 to 10 (7450 ESS, 7750 SR-12)

1 to 14 (VSR)

1 to 20 (7950 XRS, VSR)

fp-number

Specifies the FP number associated with the queue group.

Values

1

group-name

Specifies the queue group name, up to 32 characters.

access

Displays policer statistics applied on an access port.

network

Displays policer statistics applied on a network port.

detail

Displays detailed information.

ingress

Displays ingress queue group information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR

card-status

card-status

Syntax

card-status

Context

[Tree] (tools>dump>service>id>fdb card-status)

Full Context

tools dump service id fdb card-status

Description

This command displays the following MAC address information for each line card in the system:

  • the number of allocated MAC addresses

  • the number of pending MAC address allocations

  • the number of pending free MAC addresses

Platforms

All

Output

Output Example
*A:PE1# tools dump service id 1 fdb card-status
===============================================================================
VPLS FDB Card Status at 01/31/2017 08:44:38
===============================================================================
Card                Allocated           PendAlloc           PendFree
-------------------------------------------------------------------------------
1                   4                   0                   0
2                   4                   0                   0
5                   4                   0                   0
===============================================================================
*A:PE1#

category-map

category-map

Syntax

category-map [category-map]

category-map category-map subscribers

Context

[Tree] (show>subscr-mgmt category-map)

Full Context

show subscriber-mgmt category-map

Description

This command displays category map information.

With no parameters specified, a summary view of all configured category maps is displayed.

With the optional category-map name parameter specified, the detailed configuration of the specified category map name is displayed.

With the category-map subscribers parameters specified, all subscribers that have the specified category-map associated are displayed.

Parameters

category-map

Specifies the category map name for which information is displayed.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management category map information.

Output Example
Node# show subscriber-mgmt category-map "cat-map-1"
===============================================================================
Category Map: cat-map-1
===============================================================================
Description        : gy - time and volume
Credit Type        : volume             Credit Exh. Thresh.: 80%
Activity Thresh.   : 0 kb/s
Gx session level
usage monitoring   : false
-------------------------------------------------------------------------------
Category: cat-1-time
-------------------------------------------------------------------------------
Description        : Rating group for Time quota
Credit Type Over.  : none               Rating Group       : 11
OutOfCredit Action : none
Default Credit     : none
Ingress Queues     : 1
Egress Queues      : 1
Ingress Policers   : none
Egress Policers    : none
ExhCrdSvcLvl Pir   : none
-------------------------------------------------------------------------------
Category: cat-1-volume
-------------------------------------------------------------------------------
Description        : Rating group for Volume quota
Credit Type Over.  : none               Rating Group       : 12
OutOfCredit Action : none
Default Credit     : none
Ingress Queues     : 1
Egress Queues      : 1
Ingress Policers   : none
Egress Policers    : none
ExhCrdSvcLvl Pir   : 100
===============================================================================

Category Map Field Descriptions describes category map output fields.

Table 12. Category Map Field Descriptions

Field

Description

Description

The user provided description of this policy

Credit Type

The volume or time based accounting is performed

Credit Exh. Thresh

The credit exhaust threshold considered to take action

Activity Thresh.

The threshold (in kb/s) that is applied to determine whether or not activity is occurring

Gx session level usage monitoring

Whether category map supports Gx session level usage monitoring

Credit Type Over.

Credit type override

Rating Group

The rating group applicable for this category

OutOfCredit Action

The action to be taken if the credit es exhausted

Default Credit

The default value for the Time credit

Ingress Queues

The ingress queues defined in this category

Egress Queues

The egress queues defined in this category

Ingress Policers

The ingress policers defined in this category

Egress Policers

The egress queues defined in this category

ExhCrdSvcLvl Pir

The credit exhaust threshold considered to take action

category-set-id

category-set-id

Syntax

category-set-id category-set

Context

[Tree] (show>app-assure>web-service category-set-id)

Full Context

show application-assurance web-service category-set-id

Description

This command displays information for the web-service category set.

Parameters

category-set

Specifies the category set ID.

Values

0 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output examples show information about SAPs using the application profile.

Output Example
# show application-assurance web-service category-set-id 1
===============================================================================
Compatible Classifier-ids
===============================================================================
Name                Description
-------------------------------------------------------------------------------
web-sevice-1        WebTitan Web Filtering
===============================================================================

ccrt-replay

ccrt-replay

Syntax

ccrt-replay [session-id session-id] [diameter-application-policy name]

ccrt-replay diameter-application-policy name summary

ccrt-replay summary

Context

[Tree] (show>subscr-mgmt>diam-session ccrt-replay)

Full Context

show subscriber-mgmt diameter-session ccrt-replay

Description

This command displays:

  • information for all diameter sessions that are in CCR-T replay mode:

    • Diameter session ID

    • Diameter Application Policy

    • Replay Time left

  • statistics per diameter application policy for diameter sessions in CCR-T replay mode or that were in CCR-T replay mode and were dropped or terminated:

    • Sessions in CCR-T replay mode: the number of Diameter Gx or Gy sessions from the specified diameter application policy that are currently in CCR-T replay mode

    • Replay sessions dropped (maximum life-time expired): the number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because no CCA-t was received before max-lifetime expiration

    • Replay sessions dropped (to free resources): the number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because the maximum number of active Diameter sessions for Gx or Gy was reached

    • Replay sessions dropped (cleared): the number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because the operator issued a clear subscriber-mgmt diameter-session ccrt-replay diameter-application-policy name sessions command

    • Replay sessions terminated (CCA-T received): the number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and for which a CCA-t was received before max-lifetime expiration

    • Statistics last cleared time: timestamp when the statistics were last cleared or n/a if the statistics were never cleared

Parameters

name

Specifies the application policy, up to 32 characters.

session-id

Specifies a diameter session ID.

summary

Displays summarized information about CCR-T replay.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management CCR-T replay information.

Output Example
*A:Dut-C# show subscriber-mgmt diameter-session ccrt-replay
===============================================================================
Diameter Sessions in CCR-t Replay Mode
===============================================================================
Session-id                                                  Replay Time Left
    Diameter Application Policy
-------------------------------------------------------------------------------
router.workstation.be;1431089354;13
    diamapppol_gx                                           0d 21:21:46
bng.nokia.com;1537773225;4
    diam-gy-1                                               0d 00:59:16
-------------------------------------------------------------------------------
No. of Matching Entries: 2
===============================================================================
*A:Dut-C# show subscriber-mgmt diameter-session ccrt-replay session-id ro
===============================================================================
Diameter Sessions in CCR-t Replay Mode
===============================================================================
Session-id                                                  Replay Time Left
    Diameter Application Policy
-------------------------------------------------------------------------------
router.workstation.be;1431089354;13
    diamapppol_gx                                           0d 21:21:27
-------------------------------------------------------------------------------
No. of Matching Entries: 1
===============================================================================
*A:Dut-C# show subscriber-mgmt diameter-session ccrt-replay summary
===============================================================================
Diameter Sessions in CCR-t Replay Mode
===============================================================================
Total Count : 2
===============================================================================
*A:Dut-C# show subscriber-mgmt diameter-session ccrt-replay diameter-application-policy "diam-gy-1"
===============================================================================
Diameter Sessions in CCR-T Replay Mode
===============================================================================
Session-id                                                  Replay Time Left
    Diameter Application Policy
-------------------------------------------------------------------------------
bng.nokia.com;1537773225;6
    diam-gy-1                                               0d 00:58:33
-------------------------------------------------------------------------------
No. of Matching Entries: 1
===============================================================================
===============================================================================
Diameter CCR-T Replay status for policy "diam-gy-1"
===============================================================================
Sessions in CCR-T replay mode                            : 1
Replay sessions dropped (maximum life-time expired)      : 0
Replay sessions dropped (to free resources)              : 0
Replay sessions dropped (cleared)               : 0
Replay sessions terminated (CCA-T received)              : 1
Statistics last cleared time                             : N/A
===============================================================================

CCR-T Replay Field Descriptions describes CCRT replay output fields.

Table 13. CCR-T Replay Field Descriptions

Field

Description

Session-id

The diameter session ID that is in CCR-T replay mode

Diameter Application Policy

The diameter application policy name to which the Gx or Gy session in CCR-T replay mode belongs

Replay Time Left

The remaining max-lifetime before the Diameter Gx or Gy session in CCR-T replay mode is dropped

No. of Matching Entries

The number of entries matching the search criteria

Sessions in CCR-T replay mode

The number of Diameter Gx or Gy sessions from the specified diameter application policy that are in CCR-T replay mode

Replay sessions dropped (maximum life-time expired)

The number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because no CCA-t was received before max-lifetime expiration

Replay sessions dropped (to free resources)

The number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because the maximum number of Diameter sessions was reached

Replay sessions dropped (cleared)

The number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and got dropped because the operator issued a clear subscriber-mgmt diameter-session ccrt-replay diameter-application-policy name sessions command

Replay sessions terminated (CCA-T received)

The number of Diameter Gx or Gy sessions from the specified diameter application policy that were in CCR-T replay mode and for which a CCA-t was received before max-lifetime expiration

Statistics last cleared time

The timestamp when the statistics were last cleared or n/a if the statistics were never cleared

ccrt-replay

Syntax

ccrt-replay diameter-application-policy name statistics

ccrt-replay diameter-application-policy name sessions

Context

[Tree] (clear>subscr-mgmt>diam-session ccrt-replay)

Full Context

clear subscriber-mgmt diameter-session ccrt-replay

Description

This command, when the statistics parameter is specified, clears the CCR-T replay statistics and updates the "Statistics last cleared time” value.

This command, when the sessions parameter is specified, drops the diameter Gx or Gy sessions that are in CCR-T replay mode.

Parameters

name

Specifies the diameter application policy, up to 32 characters.

statistics

Clears the CCR-T replay statistics.

sessions

Clears the sessions that are in CCR-T replay mode.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

cem

cem

Syntax

cem

Context

[Tree] (clear>service>statistics>id cem)

Full Context

clear service statistics id cem

Description

This command clears CEM statistics for this service.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

cert-profile

cert-profile

Syntax

cert-profile name association

cert-profile [name]

cert-profile name entry [value]

Context

[Tree] (show ipsec cert-profile)

Full Context

show ipsec cert-profile

Description

This command displays IPsec certificate profile information.

Parameters

name

Specifies an existing certificate profile name.

association

Displays information for which this IPsec certificate profile is associated.

value

Displays information for the specified entry.

Values

1 to 8

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the show ipsec cert-profile command.

Output Example
*A:Dut-A# show ipsec cert-profile cert "cert-1.der" 
==============================================================================
Certificate Profile Entry 
==============================================================================
Id Cert                     Key                      Status Flags
------------------------------------------------------------------------------
1  cert-1.der               key-1.der                
==============================================================================
*A:Dut-A# 


*A:Dut-A# show ipsec cert-profile "cert-1.der" entry 1
===============================================================================
IPsec Certificate Profile: cert-1.der Entry: 1 Detail
===============================================================================
Cert File        : cert-1.der
Key File         : key-1.der
Status Flags     : (Not Specified)
Comp Chain       : complete             

Compute Chain CA Profiles
-------------------------------------------------------------------------------
CA10
CA9
CA8
CA7
CA6
===============================================================================
*A:Dut-A# 

cert-profile

Syntax

cert-profile [name]

cert-profile name association

cert-profile name entry entry

Context

[Tree] (show system security tls cert-profile)

Full Context

show system security tls cert-profile

Description

This command displays information about server and client profiles that are using this certificate profile.

Parameters

entry

Specifies a certificate profile entry number for which to display information.

Values

1 to 8

name

Specifies the name of a certificate profile for which to display information.

Platforms

All

certificate

certificate

Syntax

certificate filename association

Context

[Tree] (show certificate)

[Tree] (show>ipsec certificate)

Full Context

show certificate

show ipsec certificate

Description

This command displays certificate-related information.

Parameters

filename

Specifies the certificate file name.

association

Displays information for which this IPsec certificate is associated.

Platforms

All

  • show certificate

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

  • show ipsec certificate

Output

The following output is an example of the show certificate command.

Output Example
*A:Dut-B# show certificate ca-profile   
-------------------------------------------------------------------------------
Max Cert Chain Depth: 7 (default)
-------------------------------------------------------------------------------
Certificate Display Format: 1 ASCII
===============================================================================
CA Profile
===============================================================================
CA Profile        Admin Oper  Cert File                CRL File
                  State State                          
-------------------------------------------------------------------------------
CA0               up    up    CA1-00cert.der           CA1-00crl.der
CA1               up    up    CA1-01cert.der           CA1-01crl.der
CA2               up    up    CA1-02cert.der           CA1-02crl.der
CA3               up    up    CA1-03cert.der           CA1-03crl.der
CA4               up    up    CA1-04cert.der           CA1-04crl.der
CA5               up    up    rsa_sha512_1024_0cert.d* rsa_sha512_1024_0crl.der
CA6               up    up    rsa_sha512_1024_1cert.d* rsa_sha512_1024_1crl.der
CA7               up    up    rsa_sha512_1024_2cert.d* rsa_sha512_1024_2crl.der
CA8               up    up    rsa_sha512_1024_3cert.d* rsa_sha512_1024_3crl.der
CA9               up    up    rsa_sha512_1024_4cert.d* rsa_sha512_1024_4crl.der
CA10              up    up    rsa_sha512_1024_5cert.d* rsa_sha512_1024_5crl.der
CA11              up    up    rsa_sha384_1024_0cert.d* rsa_sha384_1024_0crl.der
CA12              up    up    rsa_sha384_1024_1cert.d* rsa_sha384_1024_1crl.der
CA13              up    up    rsa_sha384_1024_2cert.d* rsa_sha384_1024_2crl.der
CA14              up    up    rsa_sha384_1024_3cert.d* rsa_sha384_1024_3crl.der
CA15              up    up    rsa_sha384_1024_4cert.d* rsa_sha384_1024_4crl.der
CA16              up    up    rsa_sha384_1024_5cert.d* rsa_sha384_1024_5crl.der
CMPv2             up    up    rsaCMPv2cert.der         rsaCMPv2CRL.der
-------------------------------------------------------------------------------
Entries found: 18
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B# 


*A:Dut-B# show ipsec certificate cert-1.der association 
===============================================================================
Associated Tunnels
===============================================================================
Tunnel                        SvcId       Sap                           Admin
-------------------------------------------------------------------------------
tun-1-s-cert-v2               3           tunnel-1.private:3            Up
tun-1-s-cert-MTA-v2           8           tunnel-1.private:7            Up
tun-1-s-cert-i_op-ss-v2       42          tunnel-1.private:10           Up
tun-1-s-cert-MTA-i_op-ss-v2   48          tunnel-1.private:11           Up
-------------------------------------------------------------------------------
IPsec Tunnels: 4
===============================================================================
*A:Dut-B# 


In the following example, the "cert-1.der" is the certificate-profile name, whereas above the cert-1.der is the actual file in use.

*A:Dut-B# show ipsec cert-profile association "cert-1.der" 
===============================================================================
IPsec tunnels using certificate profile
===============================================================================
SvcId      Type   SAP                          Tunnel
-------------------------------------------------------------------------------
3          vprn   tunnel-1.private:3           tun-1-s-cert-v2
8          vprn   tunnel-1.private:7           tun-1-s-cert-MTA-v2
42         vprn   tunnel-1.private:10          tun-1-s-cert-i_op-ss-v2
48         vprn   tunnel-1.private:11          tun-1-s-cert-MTA-i_op-ss-v2
===============================================================================
Number of tunnel entries: 4
===============================================================================
===============================================================================
IPsec gateways using certificate profile
===============================================================================
SvcId      Type   SAP                          Gateway
-------------------------------------------------------------------------------
1057       vprn   tunnel-1.public:18           d-cert-MTA-g1-1-v2
1092       vprn   tunnel-1.public:21           d-cert-i_op-ss-g1-1-v2
===============================================================================
Number of gateway entries: 2
===============================================================================
*A:Dut-B# 


show ipsec gateway tunnel 10.2.2.100:500 
===============================================================================
IPsec Remote Users Tunnel Detail
===============================================================================
IP Addr: 10.2.2.100:500, port: 500
-------------------------------------------------------------------------------
Service Id       : 300                  Sap Id           : tunnel-1.public:100
Address          : 10.2.2.100:500
Private If       : priv
Private Address  : 10.20.20.50
Private Service  : 400                  Template Id      : 1
Replay Window    : None                 Bi Direction SA  : true
Host MDA         : 1/2                  
Match TrustAnchor: labroot              
Last Oper Changed: 05/04/2016 17:36:20  
IKE IDI Type     : derAsn1Dn            
IKE IDI Value    : CN=Client-1
-------------------------------------------------------------------------------
Dynamic Keying Parameters
-------------------------------------------------------------------------------
Transform Id1    : 1                    Transform Id2    : None
Transform Id3    : None                 Transform Id4    : None
IPsec GW Name    : rw
Local GW Address : 172.16.100.1       
Ike Policy Id    : 1                    Ike Pol Auth     : cert
Pre Shared Key   : None
Cert Profile     : segw
Trust Anchor Prof: labroot              
Selected Cert    : segw-1.cert
Selected Key     : segw-1.key
Send Chain Prof  : None
Local Id Type    : none                 
Client Database
    Name         : (Not Specified)      
    Client ID    : None                 
Radius Acct Plcy : None                 
Radius Auth Plcy : None                 
TS-List          : <none>
Certificate Status Verify
-------------------------------------------------------------------------------
Primary          : crl                  Secondary        : none
Default Result   : good                 
DHCP
-------------------------------------------------------------------------------
Admin State      : Up                   Send Release     : true
Service          : 400                  
Gi-Address       : 10.20.20.1           
Server1-Address  : 10.9.9.9              
DHCPv4 Lease
-------------------------------------------------------------------------------
Private Address    : 10.20.20.50
Acquired           : 2016/05/04 17:36:19 UTC
Renew              : 2016/05/04 18:06:19 UTC
Rebind             : 2016/05/04 18:28:49 UTC
Valid Lifetime
    End            : 2016/05/04 18:36:19 UTC
    Total          : 3600 seconds
    Remaining      : 3585 seconds
Server             : 10.9.9.9
-------------------------------------------------------------------------------
ISAKMP-SA
-------------------------------------------------------------------------------
State            : Up                   
Established      : 05/04/2016 17:36:20  Lifetime         : 86400
Expires          : 05/05/2016 17:36:20  
ISAKMP Statistics
--------------------
Tx Packets       : 2                    Rx Packets       : 2
Tx Errors        : 0                    Rx Errors        : 0
Tx DPD           : 0                    Rx DPD           : 0
Tx DPD ACK       : 0                    Rx DPD ACK       : 0
DPD Timeouts     : 0                    Rx DPD Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Inbound (index 2)
-------------------------------------------------------------------------------
SPI              : 207232               
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 05/04/2016 17:36:20  Lifetime         : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
-------------------------------------------------------------------------------
IPsec-SA : 1, Outbound (index 1)      
-------------------------------------------------------------------------------
SPI              : 3433111520           
Auth Algorithm   : Sha1                 Encr Algorithm   : Aes128
Installed        : 05/04/2016 17:36:20  Lifetime         : 3600
Local Traffic Selectors:
10.9.9.9-10.9.9.9
    any protocol
Remote Traffic Selectors:
10.20.20.50-10.20.20.50
    any protocol
Aggregate Statistics
--------------------
Bytes Processed  : 0                    Packets Processed: 0
Crypto Errors    : 0                    Replay Errors    : 0
SA Errors        : 0                    Policy Errors    : 0
===============================================================================
Fragmentation Statistics
===============================================================================
Encapsulation Overhead                 : 73
Pre-Encapsulation
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
Post-Encapsulation                    
    Fragmentation Count                : 0
    Last Fragmented Packet Size        : 0
===============================================================================
===============================================================================

certificate-profile

certificate-profile

Syntax

certificate-profile

Context

[Tree] (show app-assure group certificate-profile)

Full Context

show application-assurance group certificate-profile

Description

This command displays certificate profile information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

cflowd

cflowd

Syntax

cflowd

Context

[Tree] (show cflowd)

Full Context

show cflowd

Description

This command displays cflowd information.

Platforms

All

cflowd

Syntax

cflowd

Context

[Tree] (show>app-assure>group cflowd)

Full Context

show application-assurance group cflowd

Description

Commands in this context display cflowd output.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

cflowd

Syntax

cflowd

Context

[Tree] (clear cflowd)

Full Context

clear cflowd

Description

This command clears the raw and aggregation flow caches which are sending flow data to the configured collectors. This action will trigger all the flows to be discarded. The cache restarts flow data collection from a fresh state. This command also clears global stats collector stats listed in the cflowd show commands.

Platforms

All

cflowd

Syntax

cflowd

Context

[Tree] (tools>dump cflowd)

Full Context

tools dump cflowd

Description

Commands in this context dump Cflowd information.

Platforms

All

cflowd

Syntax

cflowd

Context

[Tree] (tools>perform cflowd)

Full Context

tools perform cflowd

Description

Commands in this context perform Cflowd operations.

Platforms

All

cflowd

Syntax

cflowd

Context

[Tree] (clear>app-assure>group cflowd)

Full Context

clear application-assurance group cflowd

Description

This command clears cflowd application assurance statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

cfm-stack-table

cfm-stack-table

Syntax

cfm-stack-table [all-ports] [level level] [direction { up | down}] [primary-vlan-enabled vlan-id]

cfm-stack-table [{all-sdps | all-virtuals}] [level level] [direction { up | down}] [primary-vlan-enabled vlan-id]

cfm-stack-table facility [{all-ports | all-port-meps | all-lags | all-lag-meps | all-tunnel-meps | all-router-interfaces}] [level level] [direction { up | down}]

cfm-stack-table facility collect-lmm-stats

cfm-stack-table facility lag lag-id [tunnel tunnel-id] [level level] [direction { up | down]

cfm-stack-table facility port port-id [tunnel tunnel-id] [level level] [ direction {up | down}]

cfm-stack-table facility router-interface interface-name [level level] [direction { up | down]

cfm-stack-table port port-id [ vlan qtag[.qtag]] [level level] [direction {up | down}] [primary-vlan-enabled vlan-id]

cfm-stack-table sdp sdp-id[:vc-id] [level level] [direction {up | down}] [primary-vlan-enabled vlan-id]

cfm-stack-table virtual service-id [level level]

Context

[Tree] (show>eth-cfm cfm-stack-table)

Full Context

show eth-cfm cfm-stack-table

Description

This command displays stack-table information. This stack-table is used to display the various management points MEPs and MIPs that are configured on the system. These can be service-based or facility-based. The various options allow the operator to be specific. If no parameters are included then the entire stack-table is displayed.

Parameters

port port-id

Displays the bridge port or aggregated port on which MEPs or MHFs are configured.

Values

port-id

slot/mda/port[.channel]

lag-id

lag-id

lag

keyword

id

1 to 800

eth-sat-id

esat-<id>/<slot>/[u]<port>

esat

keyword

id

1 to 20

u

keyword for up-link port

tdm-sat-id

tsat-<id>/<slot>/[<u>]<port>.<channel>

tsat

keyword

id

1 to 20

u

keyword for up-link port

vlan vlan-id

Displays the associated VLAN ID.

Values

1 or 4094 or all

level

Displays the MD level of the maintenance point.

Values

0 to 7

collect-lmm-stats

Displays facility MEPs on which LMM collection is enabled.

direction up | down

Displays the direction in which the MP faces on the bridge port.

facility

Displays the CFM stack table information for facility MEPs. The base command displays all the facility MEPs. Options may be included in order to further parse the table for specific facility MEP information.

sdp sdp-id[:vc-id]

Displays CFM stack table information for the specified SDP.

Values

sdp-id: 1 to 32767

vc-id: 1 to 4294967295

virtual service-id

Displays CFM stack table information for the specified SDP.

Values

service-id: 1..2148278386]

svc-name: up to 64 characters

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of stack table information. ETH-CFM CFM Stack Table Field Descriptions describes the output content.

Output Example
show eth-cfm cfm-stack-table
===============================================================================
CFM Stack Table Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
A = AisRx, L = CSF LOS Rx, F = CSF AIS/FDI rx, r = CSF RDI rx
G = receiving grace PDU (MCC-ED or VSM) from at least one peer

===============================================================================
CFM SAP Stack Table
===============================================================================
Sap                Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
1/1/4:1001           3 D         13         13 1002 b6:1c:01:01:00:04 ------- -
    13
    13

1/1/9:100            2 U         12       1000  928 00:00:01:01:09:28 ------- -
    12
    vpls-100-1

1/1/10:100           2 U         12       1000 1028 00:00:01:01:10:28 ------- -
    12
    vpls-100-1

===============================================================================

===============================================================================
CFM Ethernet Tunnel Stack Table
===============================================================================
Eth-tunnel         Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Ethernet Ring Stack Table
===============================================================================
Eth-ring           Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility Port Stack Table
===============================================================================
Port     Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
1/1/4     0          0 D         10   11400115    2 00:00:00:00:00:28 ------- -
    10
    11400115

1/1/6     0          0 D         10   11600117    2 00:00:00:00:00:28 ------- -
    10
    11600117

===============================================================================

===============================================================================
CFM Facility LAG Stack Table
===============================================================================
Lag      Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
 name
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility Tunnel Stack Table
===============================================================================
Port/Lag Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility Interface Stack Table
===============================================================================
Interface          Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM SAP Primary VLAN Stack Table
===============================================================================
Sap
  Primary VlanId   Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
1/1/4:cp-1
      60             3 D         13         13 1001 b6:1c:01:01:00:04 --C---- -
    13
    13

===============================================================================

===============================================================================
CFM SDP Stack Table
===============================================================================
Sdp                Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM SDP Primary VLAN Stack Table
===============================================================================
Sdp
  Primary VlanId   Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Virtual Stack Table
===============================================================================
Service            Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Table 14. ETH-CFM CFM Stack Table Field Descriptions

Label

Description

Sap

Displays associated SAP IDs.

Sdp

Displays the SDP binding for the bridge.

Level Dir

Displays the MD level of the maintenance point.

Md-index

Displays the maintenance domain (MD) index.

Ma-index

Displays the maintenance association (MA) index.

Mep-id

Displays the integer that is unique among all the MEPs in the same MA.

Mac-address

Displays the MAC address of the MP.

md-admin-name

Displays the administrative MD name.

ma-admin-name

Displays the administrative MA name.

change-key

change-key

Syntax

change-key authentication authentication-protocol old-authentication-key new-authentication-key

change-key authentication authentication-protocol privacy privacy-protocol old-privacy-key new-privacy-key

Context

[Tree] (tools>perform>system>mgmt-itf>snmp change-key)

Full Context

tools perform system management-interface snmp change-key

Description

This command generates KeyChange strings to change SNMPv3 authentication or privacy keys. The SNMP engine ID is not needed because localized keys are required as input. The KeyChange algorithm uses a random string, which generates a different output each time the command is executed.

Parameters

authentication

Generates a KeyChange string for an authentication key.

authentication-protocol

Specifies the SNMPv3 authentication protocol.

Values

hmac-md5-96 — Specifies use of the HMAC-MD5-96 authentication protocol.

hmac-sha1-96 — Specifies use of the HMAC-SHA-96 authentication protocol.

hmac-sha2-224 — Specifies use of the HMAC-SHA-224 authentication protocol.

hmac-sha2-256 — Specifies use of the HMAC-SHA-256 authentication protocol.

hmac-sha2-384 — Specifies use of the HMAC-SHA-384 authentication protocol.

hmac-sha-512 — Specifies use of the HMAC-SHA-512 authentication protocol.

old-authentication-key

Specifies the old localized authentication key.

new-authentication-key

Specifies the new localized authentication key.

privacy

Keyword to generate a KeyChange string for a privacy key.

privacy-protocol

Specifies the SNMPv3 privacy protocol.

Values

cbc-des — Specifies the use of the CBC-DES privacy protocol. This parameter is not available in FIPS-140-2 mode.

cfb128-aes-128 — Specifies the use of the CFB128-AES-128 privacy protocol.

cfb128-aes-192 — Specifies the use of the CFB128-AES-192 privacy protocol.

cfb128-aes-256 — Specifies the use of the CFB128-AES-256 privacy protocol.

old-privacy-key

Specifies the old localized privacy key.

new-privacy-key

Specifies the new localized privacy key.

Platforms

All

Output

The following output is an example of a generated KeyChange string.

Output Example
A:ALA-1# tools perform system management-interface snmp change-key authentication hmac-sha1-96 5c9ccb02cb2066f226e9d41b428c63ba801a3319
6caf2644ebb8141876a455ba14e58d5c61d8cb16
KeyChange string : 8feb0fa890f3607aa0986e7f0a71d3d889da1d3f1f07933770e50639c0770cca4dc0519637796240

channel

channel

Syntax

channel [router router-instance | vpls service-id | service-name service-name] [fp slot-number[/fp-number]] [group ip-address [source ip-address]] [path path-type] [detail]

Context

[Tree] (show>mcast-management channel)

Full Context

show mcast-management channel

Description

This command displays multicast path management channel related information.

Parameters

service-id

Specifies an existing VPLS service ID.

Values

1 to 214748364

service-name

A string up to 64 characters.

slot-number

Displays information for the specified card slot.

fp-number

Specifies an FP.

Values

1 to 8

ip-address

ipv4-address in the form a.b.c.d

path-type

Specifies the path type.

Values

primary, secondary

Platforms

7450 ESS, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-7/12/12e, 7750 SR-s, 7950 XRS, VSR

Output

The following output is an example of multicast management channel information.

Output Example
*A:PE# show mcast-management channel
===============================================================================
Multicast Channels
===============================================================================
Legend :  D - Dynamic  E - Explicit
===============================================================================
Source Address                              Slot/Fp   Current-Bw  Path      D/E
 Group Address                                         Highest-Bw  Plane
-------------------------------------------------------------------------------
10.0.0.29                                   5/1       3930        Primary    D
 233.252.0.1                                           3973        17
===============================================================================
Multicast Channels : 1
===============================================================================
*A:PE# show mcast-management channel detail
===============================================================================
Multicast Channels
===============================================================================
-------------------------------------------------------------------------------
Source Address     : 10.0.0.29
Group Address      : 233.252.0.1
-------------------------------------------------------------------------------
Slot/Complex       : 5/1                Current Bw         : 3918 kbps
Dynamic/Explicit   : Dynamic            Current Path       : Primary
Oper Admin Bw      : 0 kbps             Current Plane      : 17
Ing last highest   : 3973               Preference         : 0
Black-hole rate    : None               Ing sec highest    : 3970
Time remaining     : 20 seconds          Blackhole          : No
===============================================================================
Multicast Channels : 1
===============================================================================
*A:PE# 

channel

Syntax

channel [service service-id] [interface ip-int-name] [address mcast-address] [source ip-address] [detail]

Context

[Tree] (show>video>adi channel)

Full Context

show video adi channel

Description

This command displays video channel information.

Parameters

service service-id

Displays video channel information pertaining to the specified service ID.

Values

service-id: 1 to 2148278381

svc-name: A string up to 64 characters

router-name: Base, management, vpls-management

Default

Base

interface ip-int-name

Displays video channel information pertaining to the specified interface.

address mcast-address

Displays video channel information pertaining to the specified multicast channel address.

source ip-address

Displays video channel information pertaining to the source IP address.

detail

The output displays detailed video channel information.

Platforms

7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s

channel

Syntax

channel [service service-id] [interface ip-int-name] [address mcast-address] [source ip-address] [summary | detail] [pid | config | [analyzer [interval time-interval]]]

Context

[Tree] (show>video channel)

Full Context

show video channel

Description

This command displays video channel information.

Parameters

service service-id

Displays video channel information pertaining to the specified service ID.

Values

service-id: 1 to 214748364

svc-name: A string up to 64 characters

router-name: Base, management, vpls-management

Default

Base

interface ip-int-name

Displays video channel information pertaining to the specified interface.

address mcast-address

Displays video channel information pertaining to the specified multicast channel address.

source ip-address

Displays video channel information pertaining to the source IP address.

summary

The output displays summarized video channel information.

detail

The output displays detailed video channel information.

Platforms

7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s

Output

The following output is an example of this command.

Output Example
*A:SR-12/Dut-C# show video channel analyzer
===============================================================================
Video channel analyzer summary
===============================================================================
  Channel number : 1
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
MDI Delay Factor : 7                    MDI Loss Rate    :        0
Good Secs        : 54
-------------------------------------------------------------------------------
  Channel number : 2
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
MDI Delay Factor : 6                    MDI Loss Rate    :        0
Good Secs        : 54
-------------------------------------------------------------------------------
  Channel number : 3
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.7            Source Address   : 10.20.13.3
MDI Delay Factor : 7                    MDI Loss Rate    :        0
Good Secs        : 54
-------------------------------------------------------------------------------
Number of channels : 3
===============================================================================
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel analyzer address 192.0.2.6 source 10.20.13.2 interface "video-300" detail
===============================================================================
Video channel analyzer detail
===============================================================================
  Channel number : 1
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
MDI Delay Factor : 8                    MDI Loss Rate    :        0
Good Secs        : 80

===============================================================================
GOP Stats
===============================================================================
                    Min                 Max                 Avg
-------------------------------------------------------------------------------
GOP Length          40                  78                  48
Frames/Sec          39                  55                  53
===============================================================================
Frame Stats
===============================================================================
                    I-Frame             P-Frame             B-Frame
-------------------------------------------------------------------------------
Good                19                  986                 0
Bad                 0                   0                   0
===============================================================================
Error Stats
===============================================================================
                    POA Events          QoS Events          TNC Events
-------------------------------------------------------------------------------
PAT Rep             0                   0                   0
PMT Rep             0                   0                   0
PCR Rep             0                   0                   0
PAT Syntax Err      -                   -                   0
PMT Syntax Err      -                   -                   0
Sync Byte Err       -                   0                   -
Sync Loss           0                   -                   -
Unref PID           -                   -                   0
Traffic Loss        0                   -                   -
-------------------------------------------------------------------------------
Overall             0                   0                   0
-------------------------------------------------------------------------------
Reoccuring events only increment counter once every second
-------------------------------------------------------------------------------
Number of channels : 1
===============================================================================
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel pid
===============================================================================
Video Channel PID
===============================================================================
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 0                    PID Type         : pat
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 2                    PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 126336

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 32                   PID Type         : video
MPEG Stream Type : 27                   Is PCR PID       : Yes
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 1952192

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 33                   PID Type         : pmt
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 308                  PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 126336

Number of pids for this channel: 5
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
PID              : 0                    PID Type         : pat
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
PID              : 2                    PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 126336

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
PID              : 32                   PID Type         : video
MPEG Stream Type : 27                   Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 1949184

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
PID              : 33                   PID Type         : pmt
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
PID              : 308                  PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 136864
===============================================================================
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel pid interface "video-300" source 10.20.13.3 address 192.0.2.5
===============================================================================
Video Channel PID
===============================================================================
No Matching Entries
===============================================================================

*A:SR-12/Dut-C# show video channel config
===============================================================================
Video channel config
===============================================================================
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc

-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc
-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.7            Source Address   : 10.20.13.3
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc

-------------------------------------------------------------------------------
Number of channels : 3
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel config interface "video-300"
===============================================================================
Video channel config
===============================================================================
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.3
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc

-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 192.168.2.1
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc

-------------------------------------------------------------------------------
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.7            Source Address   : 10.20.13.3
Analyzer State   : Enabled              Cc Error         : Disabled
PAT Rep Err      : Enabled              TNC PAT Rep      : 200
QOS PAT Rep      : 400                  POA PAT Rep      : 600
PAT Syntax       : Enabled              PCR Rep Err      : Enabled
TNC PCR Rep      : 200                  QOS PCR Rep      : 400
POA PCR Rep      : 600                  Vid PID Absent   : 1000
PID PMT Unref    : Enabled              PMT Rep Err Secs : Enabled
TNC PMT Rep      : 400                  QOS PMT Rep      : 800
POA PMT Rep      : 2000                 PMT Syntax       : Enabled
SCTE35 Err Secs  : Disabled             TEI Err Secs     : Disabled
TS Sync Loss     : Enabled              Non-Vid Pid Abse*: 1000
Alarm Sev        : tnc

-------------------------------------------------------------------------------
Number of channels : 3
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel pid
===============================================================================
Video Channel PID
===============================================================================
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 0                    PID Type         : pat
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 16                   PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 2                    PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 126336

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 32                   PID Type         : video
MPEG Stream Type : 27                   Is PCR PID       : Yes
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 1941664

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 33                   PID Type         : pmt
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 16                   PID Bitrate      : 0

===============================================================================
*A:SR-12/Dut-C#

*A:SR-12/Dut-C# show video channel pid interface "video-300" source 10.20.13.2 address 192.0.2.6
===============================================================================
Video Channel PID
===============================================================================
Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 0                    PID Type         : pat
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 16                   PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 2                    PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 136864

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 32                   PID Type         : video
MPEG Stream Type : 27                   Is PCR PID       : Yes
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 1931136

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 33                   PID Type         : pmt
MPEG Stream Type : 0                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 16                   PID Bitrate      : 0

Service Id       : 300                  Interface Name   : video-300
Group Address    : 192.0.2.6            Source Address   : 10.20.13.2
PID              : 308                  PID Type         : audio
MPEG Stream Type : 4                    Is PCR PID       : No
Cc Err Secs      : 0                    TEI Err Secs     : 0
Absent Err Secs  : 0                    PID Bitrate      : 136864

Number of pids for this channel: 5
-------------------------------------------------------------------------------
Number of channels  : 1
===============================================================================
*A:SR-12/Dut-C#

channel

Syntax

channel all [rt-client] [rt-server] [fcc-server] [ad-insert]

channel grp-address [source srcAddr] [rt-client] [ rt-server] [fcc-server] [ad-insert]

Context

[Tree] (clear>video>statistics>id channel)

Full Context

clear video statistics id channel

Description

This command clears video statistics for a particular channel.

Parameters

all

Clears statistics for all channels.

rt-client

Clears all RET client related statistics.

rt-server

Clears all RET server related statistics.

fcc-server

Clears all FCC server related statistics.

ad-insert

Clears all ad insert related statistics.

grp-address

Clears statistics for the specified channel group address.

source srcAddr

Clears statistics for the specified source address.

Platforms

7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s

charging-filter

charging-filter

Syntax

charging-filter {charging-filter-id | non-zero}

Context

[Tree] (show>app-assure>group>policy charging-filter)

Full Context

show application-assurance group policy charging-filter

Description

This command displays information about the charging filter.

Parameters

charging-filter-id

Specifies the ID of an existing charging filter entry.

Values

1 to 65535

non-zero

Specifies to show all non-zero count entries.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the charging filter information, and Show AA group policy charging filter output fields describes the fields.

show application-assurance group 1:0 policy charging-filter 1
Output Example
===============================================================
Charging Filter Entry 1
===============================================================
Description         : "Charging-filter entry for WhatsApp Video"
Admin State         : in-service
Charging Group      : "cgVideo100"
Hits                : 0 flows

Match :
    Application     : eq "Whats App"
    Flow Attribute  : flow-attribute video confidence gte 100
===============================================================
Table 15. Show AA group policy charging filter output fields

Label

Description

Charging Filter Entry

The charging filter

Description

The description of the charging filter

Admin State

The administrative state of the filter

Charging Group

The charging group

Hits

The number of hits

Application

The matched application

Flow Attribute

The flow attribute used by the match criteria

charging-group

charging-group

Syntax

charging-group

charging-group charging-group-name

Context

[Tree] (show>app-assure>group>policy charging-group)

Full Context

show application-assurance group policy charging-group

Description

This command displays application-assurance policy application information.

Parameters

charging-group-name

Specifies the application name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

charging-group

Syntax

charging-group [charging-group-name] count [detail]

charging-group count top granularity [max-count max-count]

Context

[Tree] (show>app-assure>group>aa-sub charging-group)

Full Context

show application-assurance group aa-sub charging-group

Description

This command displays application-assurance group charging group information.

Parameters

charging-group-name

Specifies an existing charging group.

count

Displays the counters for the charging group.

detail

Displays detailed information.

top

Displays counters sorted by granularity.

granularity

Specifies the granularity of the search.

Values

octets, packets, flows

max-count

Specifies the maximum flows to display.

Values

1 to 4294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

charging-group

Syntax

charging-group [charging-group-name] count

Context

[Tree] (show>app-assure>group>aa-sub>um charging-group)

Full Context

show application-assurance group aa-sub usage-monitor charging-group

Description

This command displays usage monitor statistics for the charging group.

Parameters

charging-group-name

Specifies the charging group name, up to 32 characters.

count

Displays counters for the charging group.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

charging-group

Syntax

charging-group [charging-group-name] count [detail]

Context

[Tree] (tools>dump>app-assure>group>aa-sub charging-group)

Full Context

tools dump application-assurance group aa-sub charging-group

Description

This command displays per-subscriber per-charging-group statistics.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

chassis

chassis

Syntax

chassis [environment] [ccm] [power-supply] [chassis-id]

chassis class chassis-class

chassis detail [class chassis-class]

Context

[Tree] (show chassis)

Full Context

show chassis

Description

This command displays general status information about the chassis.

Parameters

chassis-id

Specifies the ID of the chassis.

chassis-class

Displays information related to the chassis of the specified class.

Values

router or eth-sat

environment

Displays environmental status information about the chassis.

Default

Displays all chassis information.

power-supply

Displays the status of the power supply in the chassis.

Default

Displays all chassis information.

detail

Displays detailed information for all chassis in the system.

ccm

Displays chassis control module information for platforms that support CCMs.

Platforms

All

Output

See the following sections for output examples:

Output Example: show chassis (showing 7750 SR)
A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7750 SR-12
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 12
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 97
  Num of physical ports             : 97
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Off
  Over Temperature state            : OK
  Base MAC address                  : 10:e8:78:b8:21:47
  Admin chassis mode                : d
  Oper chassis mode                 : d
  Fabric Speed                      : 10 Gig
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
===============================================================================
A:PE-1#
Output Example: show chassis environment
A:SR-12# show chassis environment
 ===============================================================================
 Chassis 1 Detail
 ===============================================================================
 Environment Information
   Number of fan trays : 3
   Number of fans : 6
   Fan tray number : 1
     Speed : 44 %
     Status : up
   Fan tray number : 2
     Speed : 44 %
     Status : up
   Fan tray number : 3
     Speed : 44 %
     Status : up
 ===============================================================================
Output Example: show chassis power-supply (showing 7750 SR-1)
A:ALA-4# show chassis power-supply
===============================================================================
Chassis 1 Detail 
=============================================================================== 
Power Supply Information 
  Number of power supplies          : 1 
 
  Power supply number               : 1 
    Power supply type               : dc multiple 
    Power supply model              : pem 
    Status1                         : present 
    Input voltage 1                 : 53.81 Volts 
    Status2                         : failed  
    Input voltage 2                 : 0.00 Volts 
===============================================================================
A:ALA-4#
Output Example: show chassis ccm
A:7750-3# show chassis ccm 
===============================================================================
Chassis Information
===============================================================================
Chassis Control Module (CCM) Information
    CCM number                    : 1                                          
    Equipped                      : yes                                        
    Type                          : ccm-xp                           

Hardware Data
    Part number                   : Sim Part#                                  
    CLEI code                     : Sim CLEI                                   
    Serial number                 : ccm-0                                      
    Manufacture date              : 01012003                                   
    Manufacturing string          : Sim MfgString ccm-0                        
    Manufacturing deviations      : Sim MfgDeviation ccm-0                     
    Administrative state          : up                                         
    Operational state             : up                                         
    Temperature                   : 32C                                        
    Temperature threshold         : 75C                                        
    Time of last boot             : N/A                                        
    Current alarm state           : alarm cleared                              
===============================================================================
A:7750-3>
Output Example: show chassis (showing 7950 XRS)
*A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7950 XRS-20
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 24
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 314
  Num of physical ports             : 314
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Amber
  Over Temperature state            : OK
  Base MAC address                  : 24:af:4a:a3:ac:c5
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
===============================================================================
*A:PE-1# 
Output Example: show chassis detail (showing 7950 XRS)
*A:PE-1# show chassis detail 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7950 XRS-20
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 24
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 314
  Num of physical ports             : 314
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Amber
  Over Temperature state            : OK
  Base MAC address                  : 24:af:4a:a3:ac:c5
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis 1 Detail
===============================================================================
  Chassis Status                    : up
  Chassis Role                      : Standalone
  Hardware Data
    Part number                     : 
    CLEI code                       : 
    Serial number                   : AME4-14
    Manufacture date                : 
    Manufacturing deviations        : (Not Specified)
    Manufacturing assembly number   : 
    Time of last boot               : 2017/10/23 12:29:41
    Current alarm state             : alarm active
-------------------------------------------------------------------------------
Environment Information
  Number of fan trays               : 2
  Number of fans                    : 16
                                      
  Fan tray number                   : 1
    Speed                           : 38 %
    Status                          : up
    Hardware Data
      Part number                   : 3HE07119AARB01
      CLEI code                     : IPUCA9U1AA
      Serial number                 : NS131062838
      Manufacture date              : 03212013
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0354-03
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2017/10/23 12:27:47
      Current alarm state           : alarm cleared
      Firmware revision status      : acceptable
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    53.00 Volts  (10/23/2017 12:30:28)
        Current                     :    53.00 Volts 
        Peak                        :    54.00 Volts  (10/23/2017 12:29:48)
      Wattage
        Minimum                     :   106.00 Watts  (10/23/2017 12:30:28)
        Current                     :   159.00 Watts 
        Peak                        :   324.00 Watts  (10/23/2017 12:29:48)
        Max Required                :   900.00 Watts 
      Amperage
        Minimum                     :     2.00 Amps   (10/23/2017 12:29:56)
        Current                     :     3.00 Amps   
        Peak                        :     6.00 Amps   (10/23/2017 12:29:48)
  
  Fan tray number                   : 2
    Speed                           : 38 %
    Status                          : up
   Hardware Data
      Part number                   : 3HE07119AARB01
      CLEI code                     : IPUCA9U1AA
      Serial number                 : NS152062365
      Manufacture date              : 05232015
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0354-03
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2017/10/23 12:27:25
      Current alarm state           : alarm cleared
     Firmware revision status      : acceptable
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    52.00 Volts  (10/23/2017 12:32:01)
        Current                     :    52.00 Volts 
        Peak                        :    54.00 Volts  (10/23/2017 12:29:54)
      Wattage
        Minimum                     :   106.00 Watts  (10/23/2017 12:30:05)
        Current                     :   156.00 Watts 
        Peak                        :   371.00 Watts  (10/23/2017 12:29:51)
        Max Required                :   900.00 Watts 
      Amperage
        Minimum                     :     2.00 Amps   (10/23/2017 12:29:54)
        Current                     :     3.00 Amps   
        Peak                        :     7.00 Amps   (10/23/2017 12:29:51)
-------------------------------------------------------------------------------
Power Management Information
  Power Management Mode             : basic
  Power Safety Level                : 100%
  Power Safety Alert                : 0 watts
  Number of PEQs                    : 12
  
  PEQ number                        : 1
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0116
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:33
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 2
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0022
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:26
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 3
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0141
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:31
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 4
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0201
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:26
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 5
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
   Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0123
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:32
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 6
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0061
      Manufacture date              : 12182012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:34
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 7
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARB01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS13226A310
      Manufacture date              : 06042013
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0532-02
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:33
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 8
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
   Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0152
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:29
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 9
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0122
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:28
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 10
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0146
      Manufacture date              : 12202012
     Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:25
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 11
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0202
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:30
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 12
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0115
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:29
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
-------------------------------------------------------------------------------
Chassis Control Module (CCM) Information
  
  CCM Slot                          : A
    Equipped                        : yes
    Hardware Data
      Part number                   : 82-0263-03
      CLEI code                     : 
      Serial number                 : AQUA03-30
      Manufacture date              : 
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 
      Administrative state          : up
      Operational state             : up
      Temperature                   : 45C
      Temperature threshold         : 75C
      Time of last boot             : N/A
      Current alarm state           : alarm cleared
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    51.67 Volts  (10/23/2017 12:31:59)
        Current                     :    51.67 Volts 
        Peak                        :    52.68 Volts  (10/23/2017 12:29:52)
      Wattage
        Minimum                     :    21.29 Watts  (10/23/2017 12:30:20)
        Current                     :    21.98 Watts 
        Peak                        :    22.66 Watts  (10/23/2017 12:29:50)
        Max Required                :    22.00 Watts 
      Amperage
        Minimum                     :     0.41 Amps   (10/23/2017 12:30:20)
        Current                     :     0.43 Amps   
        Peak                        :     0.43 Amps   (10/23/2017 12:29:50)
  
  CCM Slot                          : B
    Equipped                        : yes
    Hardware Data
      Part number                   : 82-0263-03
      CLEI code                     : 
      Serial number                 : AQUA03-10
      Manufacture date              : 
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 
      Administrative state          : up
      Operational state             : up
      Temperature                   : 44C
      Temperature threshold         : 75C
      Time of last boot             : N/A
      Current alarm state           : alarm cleared
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    51.63 Volts  (10/23/2017 12:32:00)
        Current                     :    51.63 Volts 
        Peak                        :    52.59 Volts  (10/23/2017 12:30:14)
      Wattage                         
        Minimum                     :    22.66 Watts  (10/23/2017 12:30:40)
        Current                     :    23.35 Watts 
        Peak                        :    23.35 Watts  (10/23/2017 12:30:14)
        Max Required                :    22.00 Watts 
      Amperage
        Minimum                     :     0.45 Amps   (10/23/2017 12:30:14)
        Current                     :     0.46 Amps   
        Peak                        :     0.46 Amps   (10/23/2017 12:31:32)
===============================================================================
*A:PE-1#
Output Example: show chassis (showing 7750 SR with Ethernet satellites configured)
*A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7750 SR-12
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 12
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 165
  Num of physical ports             : 165
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Off
  Over Temperature state            : OK
  Base MAC address                  : 10:e8:78:b8:21:47
  Admin chassis mode                : d
  Oper chassis mode                 : d
  Fabric Speed                      : 10 Gig
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
esat-1    Ethernet Satellite  up
===============================================================================
*A:PE-1#
Output Fields: show chassis

Output Fields: show chassis describes the output fields for the show chassis command.

Table 16. Output Fields: show chassis

Label

Description

Name

The system name for the router.

Type

Displays the router model number.

Chassis Topology

Indicates the inter-chassis topology mode in which the system is operating.

Standalone indicates that the system is comprised of a single physical router chassis.

Extended (XRS-40) on a 7950 XRS based system indicates that two router chassis are connected together in a "back-to-back” topology with no additional switch fabric chassis. An extended chassis topology is comprised of two XRS-20 chassis and is also known as an XRS-40 system.

Chassis role

Specifies the Chassis Roles.

Standalone — Specifies the value for all non-7950 XRS SR OS systems and for 7950 XRS-20 standalone systems.

7950 XRS-40 Master

7950 XRS-40 Extension

Location

The system location for the device.

Coordinates

A user-configurable string that indicates the Global Positioning System (GPS) coordinates for the location of the chassis.

For example:

  • N 45 58 23, W 34 56 12

  • N37 37' 00 latitude, W122 22' 00 longitude

  • N36*39.246' W121*40.121'

CLLI Code

The Common Language Location Identifier (CLLI) that uniquely identifies the geographic location of places and certain functional categories of equipment unique to the telecommunications industry.

Number of slots

The number of slots in the 7450 ESS and 7750 SR chassis that are available for plug-in cards. The total number includes the IOM/CCM slot(s) and the CPM slots.

Number of ports

The total number of ports currently installed in this chassis. This count does not include the Ethernet ports on the CPMs/CCMs that are used for management access.

Oper Number of Slots

The number of slots in the 7950 XRS chassis that are available for XCM cards and CPM cards operating as the active or standby CPM. Oper Number of Slots goes to 24 when Chassis Topology is Extended.

Critical LED state

The current state of the Critical LED in this chassis.

Major LED state

The current state of the Major LED in this chassis.

Minor LED state

The current state of the Minor LED in this chassis.

Base MAC address

The base chassis Ethernet MAC address.

FP Generations

Identifies the FP generations for cards in the system.

System Profile

The scaling profile in use by the system.

Over Temperature state

Indicates if there is currently an over temperature condition (OK = not currently over temp).

Admin chassis mode

The configured chassis mode (chassis mode D).

Oper chassis mode

The current chassis mode.

Part number

The part number of the particular hardware assembly. In the show chassis output, the first set of Hardware Data output is for the chassis mid-plane.

CLEI code

The Common Language Equipment Code of the particular hardware assembly.

Serial number

The serial number of the particular hardware assembly.

Manufacture date

The manufacture date of the particular hardware assembly.

Manufacturing string

The factory inputted manufacturing text string for the particular hardware assembly.

Manufacturing deviations

Additional manufacturing data.

Manufacturing assembly number

Additional manufacturing data.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Number of fan trays

The total number of fan trays installed in this chassis.

Number of fans

The total number of fans installed in this chassis.

Fan tray number

The ID for each fan tray installed in the chassis

Fan tray type

Indicates the type of fan tray:

Chassis - standard fan tray

PCM - dedicated to cooling PCMs in the 7950 XRS-20e Universal chassis

Operational status

Current status of the fan tray.

Speed

Indicates the speed of the fans as a percentage.

Status

Current status of the particular hardware assembly (up, down, or not equipped).

Number of power supplies

The number of power supplies installed in the chassis.

Power supply number

The ID for each power supply installed in the chassis.

Power supply type

The basic type of the power supply.

Power supply model

The model of the power supply.

Input voltage

The input voltage for the specific power supply or power module. This field is only displayed for a subset of platforms.

CCM Slot

The identifier of the CCM (A or B).

Equipped

Indicates if the CCM is detected as physically present.

Temperature

The current temperature detected by the particular hardware assembly.

Temperature threshold

The temperature at which the particular hardware assembly considers an over temperature condition to exist.

Part number

The CCM part number.

CLEI code

The code used to identify the router.

Serial number

The CCM serial number. Not user modifiable.

Manufacture date

The chassis manufacture date. Not user modifiable.

Manufacturing string

Factory-inputted manufacturing text string. Not user modifiable.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Temperature

The internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the CCM.

chassis

Syntax

chassis [phys-chassis-id]

Context

[Tree] (tools>perform chassis)

Full Context

tools perform chassis

Description

The following command performs chassis maintenance operations.

Parameters

phys-chassis-id

The identifier of the physical chassis for the tools perform context.

Values

1

Platforms

All

chassis

Syntax

chassis

Context

[Tree] (clear chassis)

Full Context

clear chassis

Description

Commands in this context clear data for various pieces of equipment that sit in a chassis.

Platforms

7750 SR-s

chassis

Syntax

chassis

Context

[Tree] (show>mcast-mgmt chassis)

Full Context

show mcast-management chassis

Description

This command displays multicast path management chassis information.

Platforms

7450 ESS, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-7/12/12e, 7750 SR-s, 7950 XRS, VSR

check-bp-eprom

check-bp-eprom

Syntax

check-bp-eprom

Context

[Tree] (tools>perform>chassis check-bp-eprom)

Full Context

tools perform chassis check-bp-eprom

Description

This command checks the chassis BP EPROM. The function reads the EPROM and is corrected with one of the following:

  • for each SEEP that is found to be acceptable or can be corrected:

    "BP eprom X: ok” with X = seep number

  • for each SEEP that is found to be unacceptable and cannot be corrected:

    "BP eprom X: not ok”

Platforms

All

class-forwarding-policy

class-forwarding-policy

Syntax

class-forwarding-policy [policy-name]

Context

[Tree] (show>router>mpls class-forwarding-policy)

Full Context

show router mpls class-forwarding-policy

Description

This command displays the mapping of the Forwarding Classes (FCs) to the set IDs as well as the default set ID of the CBF policy. It also shows the number of MPLS LSPs that reference this CBF policy.

Parameters

policy-name

Specifies the name of the class-forwarding-policy, up to 256 characters and composed of printable, 7-bit ASCII characters excluding double quotes. If the string contains spaces, use double quotes to delimit the start and end of the string.

Platforms

All

Output

The following output is an example of class forwarding policy information.

Output Example
*A:Dut-B>show>router# show router mpls class-forwarding-policy "policy1" 
==============================================================================
MPLS Class Forwarding Policy Table
==============================================================================
Policy Name                      Default  Forwarding Class Set-id  Ref
                                 Set-Id   be l2 af l1 h2 ef h1 nc  Count
------------------------------------------------------------------------------
policy1                            3      1  1  2  2  3  3  4  4   50
------------------------------------------------------------------------------
No. of Forwarding Policies: 1
==============================================================================

classic-lsn-sub

classic-lsn-sub

Syntax

classic-lsn-sub router-instance ip-prefix ip-prefix/length

classic-lsn-sub router-instance ip-prefix ip-prefix/length subscriber-string

Context

[Tree] (clear>nat classic-lsn-sub)

Full Context

clear nat classic-lsn-sub

Description

This command clears NAT mappings for classic LSN subscribers.

Parameters

router-instance

Specifies the router instance, up to 32 characters.

ip-prefix/length

Specifies the IP prefix and length.

Values

ip-prefix: a.b.c.d (host bits must be 0)length: 0 to 32

subscriber-string

Clears subscriber string information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

clear

clear

Syntax

clear aps-id {protect | working} [number number]

Context

[Tree] (tools>perform>aps clear)

Full Context

tools perform aps clear

Description

This command removes all Automated Protection Switching (APS) operational commands.

Parameters

aps-id

This option clears a specific APS on un-bundled SONET/SDH ports.

Values

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

protect

This command clears a physical port that is acting as the protection circuit for the APS group.

working

This command clears a physical port that is acting as the working circuit for this APS group.

number

Specifies the APS channel number.

Values

1, 2

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

clear

Syntax

clear ring-index

Context

[Tree] (tools>perform>eth-ring clear)

Full Context

tools perform eth-ring clear

Description

The clear command, at the Ethernet Ring Node, is used for the following operations:

  • Clearing an active local administrative command, such as a Forced Switch or Manual Switch

  • Triggering reversion before the WTR or WTB timer expires in case of revertive operation

  • Triggering reversion in case of non-reactive operation

Parameters

ring-index

Specifies an Ethernet Ring index.

Values

1 to 128

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

clear

Syntax

clear id tunnel-id

clear lsp-name

Context

[Tree] (tools>perform>router>mpls>tp-tunnel clear)

Full Context

tools perform router mpls tp-tunnel clear

Description

This command clears all the MPLS-TP linear protection operational commands for the specified LSP that are currently active.

Parameters

tunnel-id

Specifies the tunnel number of the MPLS-TP LSP.

Values

1 to 61440

lsp-name

Specifies the name of the MPLS-TP LSP, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

clear

Syntax

clear

Context

[Tree] (clear)

Full Context

clear

Description

Commands in this context are used to clear specific statistics, reset specific hardware assemblies (for example, cards), and delete temporary operational state data (for example, contents of a log in memory).

Platforms

All

clear-arp

clear-arp

Syntax

clear-arp [ip ipv4-address]

Context

[Tree] (tools>perform>wlan-gw>lanext>bd clear-arp)

Full Context

tools perform wlan-gw lanext bd clear-arp

Description

This command clears all ARP table entries for the specified HLE BD or a specific entry if an IPv4 address is specified.

Parameters

ipv4-address

Specifies the IPv4 address of the ARP table entry to be cleared.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

clear-force

clear-force

Syntax

clear-force all-mc

clear-force lag-id lag-id [sub-group sub-group-id]

clear-force peer-mc ip-address

Context

[Tree] (tools>perform>lag clear-force)

Full Context

tools perform lag clear-force

Description

This command clears forced status.

Parameters

all-mc

Specifies all MC-LAGs.

lag-id

Specifies the LAG ID.

Values

1 to 800

sub-group-id

Specifies the subscriber group ID.

Values

1 to 16

ip-address

Specifies the peer MC IP address.

Values

ipv4-address: a.b.c.d

ipv6-address:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d, where x: [0 to FFFF]H and d: [0 to 255]D

Platforms

All

clear-lockout-annexb

clear-lockout-annexb

Syntax

clear-lockout-annexb aps-id

Context

[Tree] (tools>perform>aps clear-lockout-annexb)

Full Context

tools perform aps clear-lockout-annexb

Description

This command clears lockout of the Annex B APS group.

Parameters

aps-id

Specifies an APS ID.

Values

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

clear-mac

clear-mac

Syntax

clear-mac [mac ieee-address]

Context

[Tree] (tools>perform>wlan-gw>lanext>bd clear-mac)

Full Context

tools perform wlan-gw lanext bd clear-mac

Description

This command clears all MAC table entries for the specified HLE BD or a specific entry if a MAC address is specified.

Parameters

ieee-address

Specifies the MAC address of the MAC table entry to be cleared.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

clear-neighbor

clear-neighbor

Syntax

clear-neighbor [ip6 ipv6-address]

Context

[Tree] (tools>perform>wlan-gw>lanext>bd clear-neighbor)

Full Context

tools perform wlan-gw lanext bd clear-neighbor

Description

This command clears all neighbor table entries for the specified HLE BD or a specific entry if an IPv6 address is specified.

Parameters

ipv6-address

Specifies the IPv6 address of the neighbor table entry to be cleared.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

cli

cli

Syntax

cli

Context

[Tree] (show>log cli)

Full Context

show log cli

Description

Commands in this context display log information specific to CLI users (classic CLI or MD-CLI).

Platforms

All

cli-session-group

cli-session-group

Syntax

cli-session-group session-group-name

Context

[Tree] (show>system>security cli-session-group)

Full Context

show system security cli-session-group

Description

This command displays the user profiles of this CLI session group and the session group details.

Parameters

session-group-name

Specifies a session group, up to 32 characters.

Platforms

All

client

client

Syntax

client all

client client-address ip-address

Context

[Tree] (show>test-oam>twamp client)

Full Context

show test-oam twamp client

Description

This command displays TWAMP client information.

Parameters

ip-address

Specifies the IPv4 or IPv6 address of a client.

Values

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x:

[0 to FFFF]H

d:

[0 to 255]D

all

Displays all TWAMP client information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of TWAMP client information.

Output Example
show test-oam twamp client all
===============================================================================
Test Session information for Client 6.6.6.6
===============================================================================
Index        : 1     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
Index        : 2     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Sessions: 2
===============================================================================
===============================================================================
Test Session information for Client 10.10.10.10
===============================================================================
Index        : 1     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
Index        : 2     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Index        : 3     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Sessions: 3
===============================================================================
Test Session information for Client 1234:5678:90ab:cdef:1234:5678:90ab:cdef
===============================================================================
Index        : 1     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port  
-------------------------------------------------------------------------------
Number of Sessions: 1
===============================================================================

show test-oam twamp client 6.6.6.6
===============================================================================
Test Session information for Client 6.6.6.6
===============================================================================
Index        : 1     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
Index        : 2     State        : Active
SID          : 16 byte hex field
Src Address  : SourceIP            Src UDP Port : port
Dst Address  : DestIP            Dst UDP Port : port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Sessions: 2
===============================================================================

client-db

client-db

Syntax

client-db

client-db db-name association

client-db db-name client client-index

client-db db-name

Context

[Tree] (show>ipsec client-db)

Full Context

show ipsec client-db

Description

This commands displays information for client databases. Using this command without any parameters will list all configured client database.

Parameters

db-name

Species to list all IPsec gateways that use the specified client database.

association

Displays information for which this client database is associated.

client client-index

Specifies the client index or client name of client entry in the client database.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the show client-db command.

Output Example
show ipsec client-db     
===============================================================================
IPsec Client Database
===============================================================================
Name                                Admin State   Match List
-------------------------------------------------------------------------------
test                                Up            idi peer-ip-prefix 
-------------------------------------------------------------------------------
No. of entries: 1
===============================================================================
show ipsec client-db "test" 
===============================================================================
IPsec Client Database "test"
===============================================================================
Description: (Not Specified)
Match List : idi peer-ip-prefix 
Admin State: Up
-------------------------------------------------------------------------------
Database Client List
-------------------------------------------------------------------------------
Index     Name                                    Admin State
-------------------------------------------------------------------------------
1         client-1                                Up
2         client-2                                Up
-------------------------------------------------------------------------------
No. of entries: 2
-------------------------------------------------------------------------------
===============================================================================

client-db

Syntax

client-db db-name lookup peer-ip peer-ip-address

client-db db-name lookup idi string-type {fqdn | rfc822} string-value string-value [peer-ip peer-ip-address]

client-db db-name lookup idi address idi-ip-address [peer-ip peer-ip-address]

Context

[Tree] (tools>perform>ipsec client-db)

Full Context

tools perform ipsec client-db

Description

This command performs a lookup in the specified client-db by using specified input and displays the matching result.

Output Example

tools perform ipsec client-db "test" lookup idi string-type rfc822 string-
value client-1@examplebm.com peer-ip  10.10.10.100 
Result              :  Ok
Database            :  test
Criterion - Ike Idi :  RFC822 "client-1@examplebm.com"
Criterion - Peer IP :  10.10.10.100
Matched Record      :  1 "client-1"
Elapsed Time (us)   :  2 

Parameters

db-name

Specifies the name of the client-db.

peer-ip peer-ip-address

Specifies the peer’s tunnel IP address as input, either v4 or v6.

string-type

Specifies the peer’s IDi as input.

Values

fqdn, rfc822

idi-ip-address

Specifies the peer’s IDi of address type as input, either v4 or v6

string-value string-value

Specifies the value of FQDN or RFC822 IDi.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

client-tls-profile

client-tls-profile

Syntax

client-tls-profile [client-tls-profile]

client-tls-profile client-tls-profile association

Context

[Tree] (show system security tls client-tls-profile)

Full Context

show system security tls client-tls-profile

Description

This command displays TLS client profile information

Parameters

client-tls-profile

Specifies the client TLS profile, up to 32 characters.

Platforms

All

Output

The following output is an example of TLS client profile information.

Output Example
*A:Dut-C> show system security tls client-tls-profile 
===============================================================================
Client Profile Information
===============================================================================
Name                                           AdminState     OperState
-------------------------------------------------------------------------------
ctp                                            up             up
ctp-alt1                                       up             up
ctp-alt2                                       up             up
===============================================================================


*A:Dut-C> show system security tls client-tls-profile "ctp"
===============================================================================
Client Profile Entry "ctp"
===============================================================================
Cipher List Name             : cl_all
Trust Anchor Profile Name    : tap
===============================================================================

coa

coa

Syntax

coa [nas-port-id attr-string] [framed-ip-addr ip-address] [alc-ipv6-addr ipv6-address] [delegated-ipv6-pfx ipv6-prefix[/ipv6-prefix-length]] [framed-ipv6-pfx ipv6-prefix [/ipv6-prefix-length]] [alc-serv-id serv-id] [acct-session-id attr-string] [alc-subscr-id attr-string] [alc-brg-id attr-string] [user-name attr-string] [alc-client-hw-addr mac-address] [attr attribute [attribute]] [attr-from-file file-url] [from-server attr-string] [router-or-service attr-string] [debug]

Context

[Tree] (tools>perform>subscr-mgmt coa)

Full Context

tools perform subscriber-mgmt coa

Description

This command triggers a Change of Authorization (CoA) without a RADIUS authentication policy.

This command can be used to spoof a CoA from a configured server for purposes such as testing CoA python scripts. However, spoofing a CoA from a RADIUS server requires the configuration of a RADIUS authentication policy.

Parameters

nas-port-id attr-string

Specifies the physical access circuit of the NAS up to 253 characters.

ip-address

Specifies the IPv4 host address.

Values

ipv4-address:

a.b.c.d

ipv6-address

Specifies the IPv6 host address.

Values

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

ipv6-prefix[/ipv6-prefix-length]

Specifies the IPv6 PD host prefix.

Values

ipv6-prefix:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

ipv6-prefix-length

[0 to 128]

ipv6-prefix[/ipv6-prefix-length]

Specifies the IPv6 SLAAC host prefix.

Values

ipv6-prefix:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

ipv6-prefix-length

[0 to 128]

serv-id

Specifies the service ID of the LNS subscriber.

Values

0 to 4294967295

acct-session-id attr-string

Specifies the subscriber accounting session ID up to 22 characters.

alc-subscr-id attr-string

Specifies the subscriber ID up to 32 characters.

alc-brg-id attr-string

Specifies the BRG ID to a maximum of 32 characters.

user-name attr-string

Specifies the string matching RADIUS VSA [1] username associated to the host(s), up to 32 characters.

mac-address

Specifies the subscriber host MAC address in the form: xx:xx:xx:xx:xx:xx.

attribute

Specifies the attributes (RADIUS VSAs) for override. The VSA must be specified in number format. For example, VSA Alc-Subsc-Prof-Str=”1M-prof” is expressed as 6527.12 ="1M-prof”. Up to five attributes can be specified within this command.

For more information on VSAs, refer to the 7750 SR and VSR RADIUS Attributes Reference Guide.

Values

<type>=<value>

<type>:<tag>=<value>

<vendor>,<type>=<value>

e, <type>,<exttyp>=<value> (type=[241| 242| 243| 244])

le,<type>,<exttyp>=<value> (type=[245| 246])

evs,<type>,<vendor>,<vendor-type>=<value>

levs,<type>,<vendor>,<vendor-type>=<value>

file-url

Specifies the file URL where the VSAs are located.

Values

local-url

[cflash-id/] [file-path] (up to 200 characters including the cflash-id directory length of up to 99 characters each)

remote-url

[{ftp://| tftp://}login:pswd@remote-locn/][file-path] (up to 255 characters with the directory length of up to 99 characters each)

remote-locn

[hostname | ipv4-address | ipv6-address]

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x [-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

x - [0 to FFFF]H

d - [0 to 255]D

interface - Specifies the link local addresses, up to 32 characters

cflash-id

cf1: | cf1-A: | cf1-B: | cf2 :| cf2-A: | cf2-B: | cf3: | cf3-A: | cf3-B:

attr-string

Specifies the RADIUS server name that is configured under the router or VPRN service context, up to 32 characters.

attr-string

Specifies the router or VPRN service instance where the RADIUS server is configured, up to 32 characters.

debug

Displays the debug message associated with the CoA command.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management CoA tools information.

Output Example
Node# tools perform subscriber-mgmt coa alc-subscr-id subscriber-01 attr 6527,13=new-sla-prof debug
===============================================================================
Inject Change-of-Authorization
===============================================================================
SUCCESS: got ACK
  Change of Authorization(43) id 0 len 50 from 0.0.0.0:3799 vrid 1
    VSA [26] 8 Nokia (6527)
      SUBSC ID STR [11] 6 subscriber-01
    VSA [26] 10 Nokia (6527)
      SLA PROF STR [13] 8 new-sla-prof
  Hex Packet Dump:
  1a 0e 00 00 19 7f 0b 08 77 69 66 69 2d 31 1a 10 00 00 19 7f 0d 0a 73 6c 61
  2d 70 72 6f 66
  Change of Authorization Ack(44) 0.0.0.0:3799 id 0 len 20 vrid 1
  Hex Packet Dump:

coa-statistics

coa-statistics

Syntax

coa-statistics

Context

[Tree] (clear>subscr-mgmt>authentication coa-statistics)

Full Context

clear subscriber-mgmt authentication coa-statistics

Description

This command clears RADIUS CoA statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

collect-lmm-fc-stats

collect-lmm-fc-stats

Syntax

collect-lmm-fc-stats [{sap {sap-id | all} | sdp {sdp-id | all} | interface {interface-name | all}}]

Context

[Tree] (show>eth-cfm collect-lmm-fc-stats)

Full Context

show eth-cfm collect-lmm-fc-stats

Description

This command displays the entities that are configured with per-FC LMM counters, and whether those counters are counting in-profile packets only or all countable packets.

Each entity may have up to eight individual FC-based counters. Each FC includes a positional index value (1 to 8) under the FC that is counting. A "P” indicates that the index is only counting in-profile traffic.

When no display filters are applied, this command displays all entities and the individual FC counters. Optional filters help to reduce the output that is visible to the operator.

Parameters

sap-id

Specifies a SAP entity for which to display active individual FC counters.

Values

null

port-id | bundle-id | bpgrp-id | lag-id | aps-id

dot1q

port-id | bundle-id | bpgrp-id | lag-id | aps-id | pw-id:[qtag1| cp-conn-prof-id]

qinq

port-id | bundle-id | bpgrp-id | lag-id | pw-id:[qtag1 cp-conn-prof-id].[qtag2 | cp-conn-prof-id]

cp

keyword

conn-prof-id

1 to 8000

cem

slot/mda/port.channel

ima-grp

bundle-id [:vpi/vci | vpi | vpi1.vpi2 | cp.conn-prof-id]

cp

keyword

conn-prof-id

1 to 8000

port-id

slot/mda/port[.channel]

esat-id/slot/port

pxc-id.sub-port

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 128

ccag-id

ccag-id.path-id[cc-type]:cc-id

ccag

keyword

id

1 to 8

path-id

a | b

cc-type

.sap-net | .net-sap

cc-id

1 to 4094

eth-tunnel

eth-tunnel-id[:eth-tun-sap-id]

id

1 to 1024

eth-tun-sap-id

0 to 4094

lag-id

lag-id

lag

keyword

id

1 to 800

pw-id

pw-id

pw

keyword

id

1 to 10239

qtag1

* | 0 to 4094

qtag2

* | null | 0 to 4094

tunnel-id

tunnel-id.private | public:tag

tunnel

keyword

id

1 to 16

tag

0 to 4094

sdp-id

Specifies an SDP entity for which to display active individual FC counters.

Values

sdp-id — 1 to 32767

vc-id — 1 to 4294967295

interface-name

Specifies an interface entity for which to display active individual FC counters, up to 32 characters maximum.

all

Keyword to display all SAP, SDP, and interface entities, and the associated active individual FC counters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output example shows information about entities that are configured with per-FC counters.

Output Example
A:node-2# show eth-cfm collect-lmm-fc-stats 
===============================================================================
The FC to priority bit mapping for collect-lmm-fc-stats is as follows:
NC = 7, H1 = 6, EF = 5, H2 = 4, L1 = 3, AF = 2, L2 = 1, BE = 0

The number below each FC column indicates which counter index PDUs matching
that FC will be counted in. Entries with a "P" beside the number indicate
that only in-profile traffic is being counted. Entries without a "P" are not
profile aware and count all PDUs associated with that FC.

===============================================================================
ETH-CFM SAPs Configured to Collect Per-FC LMM Statistics
===============================================================================
Sap                 SvcId       BE L2 AF L1 H2 EF H1 NC
-------------------------------------------------------------------------------
1/1/1:100           2147483647  1  2P 3  4  5        8P
-------------------------------------------------------------------------------
No. of SAPs: 1
===============================================================================

===============================================================================
ETH-CFM SDPs Configured to Collect Per-FC LMM Statistics
===============================================================================
SdpId               SvcId       BE L2 AF L1 H2 EF H1 NC
-------------------------------------------------------------------------------
500:500             2147483647  1  2     4P 5P 6
-------------------------------------------------------------------------------
No. of SDPs: 1
===============================================================================

===============================================================================
ETH-CFM Facility Interface MEPs Configured to Collect Per-FC LMM Statistics
===============================================================================
Interface          Md-index   Ma-index  MepId  BE L2 AF L1 H2 EF H1 NC
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of Facility Interface MEPs: 1
===============================================================================

collect-lmm-stats

collect-lmm-stats

Syntax

collect-lmm-stats

Context

[Tree] (show>eth-cfm collect-lmm-stats)

Full Context

show eth-cfm collect-lmm-stats

Description

This command displays the entities that are configured with a single LMM counter using the format of the ETH-CFM stack table.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of LMM counter information.

Output Example
show eth-cfm collect-lmm-stats

=========================================================
ETH-CFM SAPs Configured to Collect LMM Statistics
=========================================================
SapId                                        SvcId
---------------------------------------------------------
---------------------------------------------------------
No. of SAPs: 0
=========================================================

===============================================================================
ETH-CFM SDPs Configured to Collect LMM Statistics
===============================================================================
SdpId               SvcId       Type    Far End
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of SDPs: 0
===============================================================================

===============================================================================
CFM Stack Table Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
A = AisRx, L = CSF LOS Rx, F = CSF AIS/FDI rx, r = CSF RDI rx
G = receiving grace PDU (MCC-ED or VSM) from at least one peer

===============================================================================
CFM Facility Port Stack Table
===============================================================================
Port     Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility LAG Stack Table
===============================================================================
Lag      Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
 name
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility Tunnel Stack Table
===============================================================================
Port/Lag Tunnel    Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================

===============================================================================
CFM Facility Interface Stack Table
===============================================================================
Interface          Lvl Dir Md-index   Ma-index  MepId  Mac-address     Defect G
    md-admin-name
    ma-admin-name
-------------------------------------------------------------------------------
No Matching Entries
=============================================================================== 

collect-lmm-stats

Syntax

collect-lmm-stats [sdp-id[:vc-id]]

Context

[Tree] (show>service>sdp-using>eth-cfm collect-lmm-stats)

Full Context

show service sdp-using eth-cfm collect-lmm-stats

Description

This command displays SDP bindings which are configured to collect statistics for LMM tests.

Parameters

sdp-id[:vc-id]

Specifies the SDP ID and virtual circuit ID on the SDP ID.

Values

sdp-id: 1 to 32767

vc-id: 1 to 4294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

collector

collector

Syntax

collector [detail]

Context

[Tree] (show>app-assure>group>cflowd collector)

Full Context

show application-assurance group cflowd collector

Description

Commands in this context display cflowd output.

Parameters

detail

Displays detailed information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the collector command information.

Output Example
A:ALU-A# show application-assurance group 1 cflowd collector
========================================================================
Application Assurance Cflowd Collectors for group 1
========================================================================
Host Address        Port  Version   Admin     Oper      Recs Sent          
------------------------------------------------------------------------
192.168.7.7         2055    10       up        up        0                  
192.168.7.8         2055    10       up        up        0                  
------------------------------------------------------------------------
Collectors : 2
------------------------------------------------------------------------
A:ALU-A#

A:ALU-A# show application-assurance group 1 cflowd collector detail
========================================================================
Application Assurance Cflowd Collectors for group 1
========================================================================
Address                      : 192.168.7.7
Port                         : 2055
Description                  : AA Collector 1
Version                      : 10
Admin State                  : up
Oper State                   : up
Records Sent                 : 0
Last Changed                 : 07/27/2009 13:36:50

Address                      : 192.168.7.8
Port                         : 2055
Description                  : AA Collector 2
Version                      : 10
Admin State                  : up
Oper State                   : up
Records Sent                 : 0
Last Changed                 : 07/27/2009 13:37:10
========================================================================
A:ALU-A# 

collector

Syntax

collector collector-id

Context

[Tree] (show>app-assure>group>cflowd>dir-exp collector)

Full Context

show application-assurance group cflowd direct-export collector

Description

Commands in this context display cflowd direct-export collector output.

Parameters

collector-id

Specifies the ID of the cflowd direct export collector.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the collector command information.

Output Example
A:Sim# show application-assurance group 1 cflowd direct-export collector 1 
===============================================================================
Application Assurance Group 1 Cflowd Direct-Export Collector 1
===============================================================================
Collector Status : Inactive
VLAN Id          : N/A
Cflowd Version   : 10
Admin State      : down
Description      : (Not Specified)
-------------------------------------------------------------------------------
Host Address                Port      Admin   Oper        Records Sent
-------------------------------------------------------------------------------
192.168.2.1                 4739      DOWN    DOWN        0
192.168.2.2                 4739      down    down        0
-------------------------------------------------------------------------------
No. of Cflowd Direct Export Collector Addresses: 2
===============================================================================
Application Assurance Group 1 Cflowd Collectors
Collector Status            : Active
===============================================================================
Address      : 192.168.2.1
Port         : 4739
Description  :
Version      : 10
Admin State  : down
Oper State   : down
Records Sent : 5400
Last Changed : 08/12/2015 19:12:28
Address      : 192.168.2.2
Port         : 4739
Description  :
Version      : 10
Admin State  : down
Oper State   : down
Records Sent : 5400
Last Changed : 08/12/2015 19:12:35
===============================================================================
             status [isa <slot/mda>] cflowd

collector

Syntax

collector [ip-address[:port]] [detail]

Context

[Tree] (show>cflowd collector)

Full Context

show cflowd collector

Description

This command displays administrative and operational status of data collector configuration.

Parameters

ip-address

Displays information only about the specified collector IP address.

Default

all collectors

:port

Displays information only about the collector on the specified UDP port.

Default

all UDP ports

Values

1 to 65535

detail

Displays details about either all collectors or the specified collector.

Platforms

All

Output

cflowd Collector Output —The following output is an example of cflowd Collector information, and Show cflowd Collector Output Fields describes the output fields.

A:R51-CfmA# show cflowd collector 

===============================================================================
Cflowd Collectors 
===============================================================================
Host Address    Port  Version   AS Type   Admin   Oper            Sent         
-------------------------------------------------------------------------------
138.120.135.103 2055  v5        peer      up      up              1380 records 
138.120.135.103 9555  v8        origin    up      up                90 records 
138.120.135.103 9996  v9          -       up      up                 0 packets 
138.120.214.224 2055  v5        origin    up      up              1380 records 
-------------------------------------------------------------------------------
Collectors : 4
===============================================================================
Table 17. Show cflowd Collector Output Fields

Label

Description

Host Address

The IP address of a remote cflowd collector host to receive the exported cflowd data

Port

The UDP port number on the remote cflowd collector host to receive the exported cflowd data

AS Type

The style of AS reporting used in the exported flow data

origin — reflects the endpoints of the AS path which the flow is following

peer — reflects the AS of the previous and next hops for the flow

Version

Specifies the configured version for the associated collector

Admin

The desired administrative state for this cflowd remote collector host

Oper

The current operational status of this cflowd remote collector host

Recs Sent

The number of cflowd records that have been transmitted to this remote collector host

Collectors

The total number of collectors using this IP address

cflowd Collector Detail Output —The following output is an example of cflowd Collector information, and Show cflowd Collector Detailed Output Fields describes the output fields.

Output Example

A:R51-CfmA# show cflowd collector detail 
===============================================================================
Cflowd Collectors  (detail)
===============================================================================
Address                      : 138.120.135.103
Port                         : 2055
Description                  : Test v5 Collector
Version                      : 5
AS Type                      : peer
Admin State                  : up
Oper State                   : up
Records Sent                 : 1260
Last Changed                 : 09/03/2009 17:24:04
Last Pkt Sent                : 09/03/2009 18:07:10
-------------------------------------------------------------------------------
                                               Sent          Open       Errors 
-------------------------------------------------------------------------------
                                                 42             0            0
===============================================================================
Address                      : 138.120.135.103
Port                         : 9555   
Description                  : Test v8 Collector
Version                      : 8
AS Type                      : origin
Admin State                  : up
Oper State                   : up
Records Sent                 : 82
Last Changed                 : 09/03/2009 17:24:04
Last Pkt Sent                : 09/03/2009 18:06:41
-------------------------------------------------------------------------------
Aggregation Type              Status           Sent          Open       Errors 
-------------------------------------------------------------------------------
as-matrix                    Disabled             0             0            0
protocol-port                Disabled             0             0            0
source-prefix                 Enabled            21             0            0
destination-prefix            Enabled            21             0            0
source-destination-prefix    Disabled             0             0            0
raw                          Disabled             0             0            0
===============================================================================
Address                      : 138.120.135.103
Port                         : 9996
Description                  : Test v9 Collector
Version                      : 9
Admin State                  : up
Oper State                   : up
Packets Sent                 : 51
Last Changed                 : 09/03/2009 17:24:04
Last Pkt Sent                : 09/03/2009 18:07:10
Template Set                 : Basic
-------------------------------------------------------------------------------
Traffic Type            Template Sent          Sent          Open       Errors 
-------------------------------------------------------------------------------
IPv4              09/03/2009 18:07:29            51             1            0
MPLS                 No template sent             0             0            0
IPv6                 No template sent             0             0            0
===============================================================================
A:R51-CfmA# 
Table 18. Show cflowd Collector Detailed Output Fields

Label

Description

Address

The IP address of a remote cflowd collector host to receive the exported cflowd data

Port

The UDP port number on the remote cflowd collector host to receive the exported cflowd data

Description

A user-provided descriptive string for this cflowd remote collector host

Version

The version of the flow data sent to the collector

AS Type

The style of AS reporting used in the exported flow data

origin — reflects the endpoints of the AS path which the flow is following

peer — reflects the AS of the previous and next hops for the flow

Admin State

The desired administrative state for this cflowd remote collector host

Oper State

The current operational status of this cflowd remote collector host

Records Sent

The number of cflowd records that have been transmitted to this remote collector host

Last Changed

The time when this row entry was last changed

Last Pkt Sent

The time when the last cflowd packet was sent to this remote collector host

Aggregation Type

The bit mask which specifies the aggregation schemes used to aggregate multiple individual flows into an aggregated flow for export to this remote host collector

none — no data will be exported for this remote collector host

raw — flow data is exported without aggregation in version 5 format

All other aggregation types use version 8 format to export the flow data to this remote host collector

Collectors

The total number of collectors using this IP address

Sent

The number of packets with flow date sent to the associated collector

Open

This counter shows the number of partially filled packets which have some flow data but are not yet filled or have been timed out (60 seconds maximum)

Error

This counter increments when there was an error during exporting of the collector packet; the most common reason will be a UDP unreachable destination for the configured collector

commit-history

commit-history

Syntax

commit-history

commit-history [keyword] [commit-id number]

Context

[Tree] (show>system>management-interface commit-history)

Full Context

show system management-interface commit-history

Description

This command displays the history of configuration changes that were committed in model-driven interfaces. A separate history of the last commits is maintained for each configuration region (bof, configure, debug, and li). Each commit is uniquely identified by a numerical sequential incrementing commit ID assigned by the system.

Note:

This command is not available in the classic CLI.

Parameters

keyword

Specifies the configuration region to display.

Values

bof, configure, debug, li

Default

configure

number

Specifies the commit history ID to display.

Values

1 to 4294967295

Platforms

All

Output

The following output is an example of commit history information.

The following table describes the commit history output fields.

Output Example
A:admin@node-2# show system management-interface commit-history
===============================================================================
Commit History
===============================================================================
Total Commits : 4

4
  Committed 2022-02-01T11:13:38.7-05:00 by admin (NETCONF) from 10.1.236.68
  Comment   "Fourth commit with NETCONF."
  Location  "cf3:\config.cfg"
3
  Committed 2022-02-01T11:01:03.8-05:00 by admin (MD-CLI) from 10.1.145.205
  Comment   "Third commit with the MD-CLI."
  Location  "cf3:\config.cfg.1"
2
  Committed 2022-02-01T11:00:47.7-05:00 by admin (MD-CLI) from 10.1.145.205
  Comment   "Second commit with the MD-CLI."
  Location  "cf3:\config.cfg.2"
1
  Committed 2022-02-01T10:56:01.3-05:00 by system (MD-CLI) from Console
  Log       "System booted version B-22.2.R1."
  Location  "Configuration is not saved to startup."
Table 19. Show Commit History Output Fields

Label

Description

Commit ID

Displays the commit ID.

Committed

Displays the date and time when the commit completed.

By

Displays the user and interface type that committed.

From

Displays the origin of the commit operation.

Comment

Displays the comment added by the user.

Log

Displays the log added by the system.

Increment

Displays the incremental saved configuration file location.

Location

Displays the complete saved configuration file location.

community

community

Syntax

community community-string

Context

[Tree] (show>system>security>snmp community)

Full Context

show system security snmp community

Description

This command lists SNMP communities and characteristics. Including the community-name parameter modifies the output to include all details for the specified community, including the source IP address list and validation failure counters.

Platforms

All

Output

The following output is an example of SNMP community information.

Show Community Output Fields describes the community output fields.

Output Example
Note:

The system-created communities that begin with "cli-” are only used for internal CLI management purposes and are not exposed to external SNMP access.

A:ALA-1# show system security snmp community
==============================================================================
Communities
==============================================================================
community           access  view                version   group name
------------------------------------------------------------------------------
cli-li-readwrite    n/a     li-view             v2c       cli-li-readwrite
cli-readonly        r       iso                 v2c       cli-readonly
cli-readwrite       rw      iso                 v2c       cli-readwrite
my-private1         rw      iso                 v1 v2c    snmp-rwa
my-public2          r       no-security         v1 v2c    snmp-ro
test-123            rwa     n/a                 v2c       snmp-trap
------------------------------------------------------------------------------
No. of Communities: 6
==============================================================================
A:ALA-1#


A:ALA-1# show system security snmp community "my-public2"
==============================================================================
Communities
==============================================================================
community           access  view                   version   group name
                               src-access-list                  authFailures
------------------------------------------------------------------------------
my-public2          r       no-security            v1 v2c    snmp-ro
                               my-list1                         5
==============================================================================
A:ALA-1#
Table 20. Show Community Output Fields

Label

Description

Community

Displays the community string name for SNMPv1 and SNMPv2c access only.

Access

Displays access information.

r — The community string allows read-only access.

rw — The community string allows read-write access.

rwa — The community string allows read-write access.

mgmt — The unique SNMP community string assigned to the management router.

vpls-mgmt — The unique SNMP community string assigned for vpls management.

View

Displays the view name.

Version

Displays the SNMP version.

Group Name

Displays the access group name.

src-access-list

Displays the name of the list of source IP addresses that are allowed to use the community, as configured using the community configuration command.

authFailures

Displays the number of SNMP requests that have failed validation using this community.

No of Communities

Displays the total number of configured community strings.

community

Syntax

community comm-id {detail | longer}

community comm-id

community comm-id hunt

Context

[Tree] (show>router>bgp>routes community)

Full Context

show router bgp routes community

Description

This command displays BGP routes with routes with a community value matching the specified value.

community is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.

Parameters

comm-id

Specifies the community ID, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm | large-comm]

where:

  • as-num — 0 to 65535

  • comm-val — 0 to 65535

  • ext-comm — the extended community, defined as one of the following:

    • {target | origin}:ip-address:comm-val

    • {target | origin}:asnum:ext-comm-val

    • {target | origin}:ext-asnum:comm-val

    • bandwidth:asnum:val-in-mbps

    • ext:4300:ovstate

    • ex \t:value1:value2

    • flowspec-set:ext-asnum:group-id

    where:

    • target — route target

    • origin — route origin

    • ip-address — a.b.c.d

    • ext-comm-val — 0 to 4294967295

    • ext-asnum — 0 to 4294967295

    • bandwidth — bandwidth

    • val-in-mbps — 0 to 16777215

    • ext — extended

    • ext:4300 — origin verification

    • ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)

    • value1 — 0000 to FFFF

    • value2 — 0 to FFFFFFFFFFFF

    • flowspec-set — flow-spec set

    • group-id — 0 to 16383

  • well-known-commnull | no-export | no-export-subconfed | no-advertise | blackhole

  • large-commasn-or-ex:val-or-ex:val-or-ex

hunt

Displays entries for the specified route.

Platforms

All

completed

completed

Syntax

completed [script-policy-name] [owner owner-name]

Context

[Tree] (clear>system>script-control>script-policy completed)

Full Context

clear system script-control script-policy completed

Description

This command clears completed script run history entries.

Parameters

script-policy-name

Specifies to only clear history entries for the specified script-policy. 32 characters maximum.

owner-name

Specifies to only clear history entries for script-policies with the specified owner. 32 characters maximum.

Default

TiMOS CLI

Platforms

All

config

config

Syntax

config

Context

[Tree] (show config)

Full Context

show config

Description

Note: This command is no longer supported and will be removed in a future release.

Platforms

All

configuration-mode

configuration-mode

Syntax

configuration-mode {mixed | model-driven} check [li | configure]

Context

[Tree] (tools>perform>system>management-interface configuration-mode)

Full Context

tools perform system management-interface configuration-mode

Description

This command checks if the configuration meets the prerequisite reference requirements to change the management interface configuration mode. Incompatible configuration commands are displayed with an error reason if the prerequisite is not met. This command does not check if the configuration has commands that are unsupported in model-driven interfaces.

Parameters

mixed

Specifies to check mixed management interface configuration mode.

model-driven

Specifies to check model-driven management interface configuration mode.

li

Specifies to only check the li configuration region.

configure

Specifies to only check the configure configuration region.

Platforms

All

configuration-sessions

configuration-sessions

Syntax

configuration-sessions

Context

[Tree] (show>system>management-interface configuration-sessions)

Full Context

show system management-interface configuration-sessions

Description

This command displays configuration sessions information.

Platforms

All

Output

The following output is an example of configuration session information. Configuration-sessions Output Fields describes the output fields.

Output Example
(pr)[]
A:admin@node-1# show system management-interface configuration-sessions
===============================================================================
Session ID  Region                 Datastore                     Lock State
   Username                        Session Mode                  Idle Time
   Session Type                    From
-------------------------------------------------------------------------------
#65         configure              Candidate                     Unlocked
   admin                           Private                       0d 00:00:00
   MD-CLI                          192.168.0.10
 66         configure              Candidate                     Unlocked
   admin                           Private                       0d 00:05:41
   MD-CLI                          192.168.0.10
 67         configure              Candidate                     Unlocked
   admin                           Private                       0d 00:05:08
   MD-CLI                          192.168.0.10
 68         configure              Candidate                     Unlocked
   admin                           Read-Only                     0d 00:02:25
   MD-CLI (2)                      192.168.0.10
 69         configure              Candidate, Running            Locked
   admin                           Exclusive                     0d 00:01:54
   MD-CLI                          192.168.0.10
-------------------------------------------------------------------------------
Number of sessions: 5
'#' indicates the current active session
'(n)' indicates the number of internal sessions
===============================================================================
Table 21. Configuration-sessions Output Fields

Label

Description

Session ID

The session ID.

Region

The region or scope that the datastore belongs to.

Datastore

Datastores that can be locked. For example: Running and Candidate.

Lock State

Locked — Indicates the session is in a locked state.

Unlocked — Indicates the session is in an unlocked state.

Username

The name of the user.

Session Mode

Exclusive — An exclusive session.

Global — A shared session.

Private — A private session.

Private Exclusive — A private exclusive session.

Read-Only — A read-only session.

Idle Time

The idle time of the session.

Session Type

NETCONF — Indicates a NETCONF session is running.

MD-CLI — Indicates an MD-CLI session is running.

gRPC — Indicates a gRPC session is running.

SNMP — Indicates an SNMP session is running.

Classic CLI — Indicates a classic CLI session is running.

System — Indicates a system session is running.

From

The originating IP address, CRON, or EHS.

connection-profile

connection-profile

Syntax

connection-profile [1 to 8000]

Context

[Tree] (show connection-profile)

Full Context

show connection-profile

Description

This command displays connection profile information.

Parameters

conn-prof-id

Specifies the connection profile ID.

Values

1 to 8000

Platforms

All

Output

The following output is an example of connection profile information.

Output Example
*A:Dut-A# show connection-profile
======================================================================== 
Connection Profile Summary Information
========================================================================  
CP Index  Number of
          Members
------------------------------------------------------------------------
10        2
20        2
======================================================================== 
*A:Dut-A#


*A:Dut-A# show connection-profile 10
======================================================================== 
Connection Profile 10 Information
======================================================================== 
Description : (Not Specified)
Last Change : 10/16/2010 06:53:30
------------------------------------------------------------------------
VPI/VCI
------------------------------------------------------------------------
10/11
10/12
======================================================================== 
*A:Dut-A# 


*A:Dut-A#
*A:bksim2801# show connection-profile 
========================================================================
Connection Profile Summary Information
========================================================================
CP Index  Number of
          Members
-------------------------------------------------------------------------------
5000      0
========================================================================
*A:bksim2801# 


*A:bksim2801# show connection-profile 2 
========================================================================
Connection Profile 2 Information
========================================================================
Description : (Not Specified)
Last Change : 09/09/2010 07:55:28 
------------------------------------------------------------------------
VPI/VCI
------------------------------------------------------------------------
2/102
10/100
========================================================================
*A:bksim2801# 

connection-profile-vlan

connection-profile-vlan

Syntax

connection-profile-vlan [conn-prof-id]

Context

[Tree] (show connection-profile-vlan)

Full Context

show connection-profile-vlan

Description

This command displays information about the connection-profiles (VLAN) in the system. When a specific connection profile is shown, the vlan-ranges that it contains are displayed.

Parameters

conn-prof-id

Specifies the VLAN connection profile ID.

Values

1 to 8000

Platforms

All

Output

The following output is an example of connection profile VLAN information.

Output Example
*A:Dut# show connection-profile-vlan 
=======================================================================
Connection Profile Vlan Summary Information
=======================================================================
CP Index                                Number of Members
-----------------------------------------------------------------------
1                                       2
=======================================================================
*A:Dut# show connection-profile-vlan 1 
=======================================================================
Connection Profile 1 Information
=======================================================================
Description : (Not Specified)
Last Change : 12/01/2015 16:50:34
=======================================================================
Connection Profile Vlan Eth Information
=======================================================================
Range Start         Range End                     Last Change
-----------------------------------------------------------------------
5                   100                           12/01/2015 16:50:34
150                 300                           12/01/2015 16:50:34
=======================================================================

connections

connections

Syntax

connections

Context

[Tree] (show>li>x-interfaces connections)

Full Context

show li x-interfaces connections

Description

This command displays the connections between the X1, X2, and X3 interfaces.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

connections

Syntax

connections [detail] [address ip-address] [port port-number]

Context

[Tree] (show>system connections)

Full Context

show system connections

Description

This command displays UDP and TCP connection information.

If no command line options are specified, a summary of the TCP and UDP connections displays.

Entries in the output with a vRtrID of 4095 and a local address of 127.x.x.x are internal connections serving internal SR OS purposes, and are not used for external protocols.

Parameters

ip-address

Displays only the connection information for the specified IP address.

Values

ipv4-address:

a.b.c.d (host bits must be 0)

ipv6-address:

x:x:x:x:x:x:x:x[-interface]

x:x:x:x:x:x:d.d.d.d[-interface]

where

x:

[0 to FFFF]H

d:

[0 to 255]D

interface:

up to 32 characters, mandatory for link local addresses

port-number

Displays only the connection information for the specified port number.

Values

0 to 65535

detail

Appends TCP statistics to the display output.

Platforms

All

Output

The following outputs are examples of system connections information, and System Connections Field Descriptions describes the output fields.

Output Example
A:ALA-12# show system connections
===============================================================================
Connections
===============================================================================
Prot RecvQ   TxmtQ   Local Address                                   State
                MSS  Remote Address                                      vRtrID
-------------------------------------------------------------------------------
TCP        0       0 0.0.0.0.21                                      LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 0.0.0.0.22                                      LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 0.0.0.0.23                                      LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 0.0.0.0.830                                     LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 0.0.0.0.6068                                    LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 0.0.0.0.47806                                   LISTEN
               1024  0.0.0.0.0                                                0
TCP        0       0 ::.21                                           LISTEN
               1024  ::.0                                                     0
TCP        0       0 ::.22                                           LISTEN
               1024  ::.0                                                     0
TCP        0       0 ::.830                                          LISTEN
               1024  ::.0                                                     0
TCP        0       0 ::.47806                                        LISTEN
               1024  ::.0                                                     0
TCP        0       0 192.168.0.11.21                                 LISTEN
               1024  0.0.0.0.0                                             4095
TCP        0       0 192.168.0.11.21059                              LISTEN
               1024  0.0.0.0.0                                             4095
TCP        0       0 172.31.129.98.22                                LISTEN
               1024  0.0.0.0.0                                             4095
TCP        0       0 172.31.129.98.23                                ESTABLISH
               1024  192.168.140.149.59042                                 4095
TCP        0    1149 172.31.129.98.23                                ESTABLISH
               1024  192.168.140.244.58579                                 4095
TCP        0       0 172.31.129.98.830                               LISTEN
               1024  0.0.0.0.0                                             4095
TCP        0       0 2001:db8::8779:8163.22                          LISTEN
               1024  ::.0                                                  4095
TCP        0       0 2001:db8::8779:8163.830                         LISTEN
               1024  ::.0                                                  4095
UDP        0       0 0.0.0.0.67                                       ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.68                                       ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.123                                      ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.319                                      ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.320                                      ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.514                                      ---
                     0.0.0.0.0                                                0
UDP        0       0 0.0.0.0.50055                                    ---
                     0.0.0.0.0                                                0
UDP        0       0 ::.123                                           ---
                     ::.0                                                     0
UDP        0       0 ::.50056                                         ---
                     ::.0                                                     0
UDP        0       0 0.0.0.0.1025                                     ---
                     0.0.0.0.0                                                1
UDP        0       0 0.0.0.0.123                                      ---
                     0.0.0.0.0                                             4095
UDP        0       0 0.0.0.0.49152 
-------------------------------------------------------------------------------
No. of Connections: 18
===============================================================================
A:ALA-12# 
Output Example: detail
A:ALA-12# show system connections detail
-------------------------------------------------------------------------------
 TCP Statistics                                                                
-------------------------------------------------------------------------------
packets sent                                : 659635                           
data packets                                : 338982 (7435146 bytes)           
data packet retransmitted                   : 73 (1368 bytes)                  
ack-only packets                            : 320548 (140960 delayed)          
URG only packet                             : 0                                
window probe packet                         : 0                                
window update packet                        : 0                                
control packets                             : 32                               
packets received                            : 658893                           
acks                                        : 338738 for (7435123 bytes)       
duplicate acks                              : 23                               
ack for unsent data                         : 0                                
packets received in-sequence                : 334705 (5568368 bytes)           
completely duplicate packet                 : 2 (36 bytes)                     
packet with some dup. data                  : 0 (0 bytes)                      
out-of-order packets                        : 20 (0 bytes)                     
packet of data after window                 : 0 (0 bytes)                      
window probe                                : 0                                
window update packet                        : 3                                
packets received after close                : 0                                
discarded for bad checksum                  : 0                                
discarded for bad header offset field       : 0                                
discarded because packet too short          : 0                                
connection request                          : 4                                
connection accept                           : 24                               
connections established (including accepts) : 27                               
connections closed                          : 26 (including 2 drops)           
embryonic connections dropped               : 0                                
segments updated rtt                        : 338742 (of 338747 attempts)      
retransmit timeouts                         : 75                               
connections dropped by rexmit timeout       : 0                                
persist timeouts                            : 0                                
keepalive timeouts                          : 26                               
keepalive probes sent                       : 0                                
connections dropped by keepalive            : 1                                
pcb cache lookups failed                    : 0                                
connections dropped by bad md5 digest       : 0
connections dropped by enhanced auth        : 0
path mtu discovery backoff                  : 0
===============================================================================
A:ALA-12#
Table 22. System Connections Field Descriptions

Label

Description

Proto

The socket protocol, either TCP or UDP.

RecvQ

The number of input packets received by the protocol.

TxmtQ

The number of output packets sent by the application.

Local Address

The local address of the socket. The socket port is separated by a period.

Remote Address

The remote address of the socket. The socket port is separated by a period.

State

Listen — The protocol state is in the listen mode.

Established — The protocol state is established.

vRtrID — The virtual router identifier.

  • vRtrID 0 — listens for connections in all routing instances including the Base and management VRFs.

  • vRtrID 1 — Base routing instance

  • vRtrID 4095 — management routing instance

MSS — The TCP maximum segment size.

connectivity-association

connectivity-association

Syntax

connectivity-association [ca-name] [detail]

Context

[Tree] (show>macsec connectivity-association)

Full Context

show macsec connectivity-association

Description

This command displays MACsec specific CA information.

Parameters

ca-name

Displays MACsec information for the specified CA name, up to 256 characters in length.

detail

Displays MACsec CA detailed information.

Platforms

All

Output

See the following output examples:

Output Example: show macsec connectivity-association
A:Dut-C# show macsec connectivity-association 
===============================================================================
ca-name            : dut_B_C_128_01
ca-name            : dut_B_C_256_01
ca-name            : dut_B_C_128_xpn_01
ca-name            : dut_B_C_256_xpn_01
ca-name            : to_Juniper_1_1_2__1
ca-name            : abcdefghijklmnoprstuvxyz@!
===============================================================================
Output Fields: show macsec connectivity-association

Output Fields: show macsec connectivity-association describes the output fields for the show macsec connectivity-association command.

Table 23. Output Fields: show macsec connectivity-association

Label

Description

ca-name

Specifies the CA name.

Output Example: show macsec connectivity-association <ca-name>
A:Dut-C# show macsec connectivity-association "abcdefghijklmnoprstuvxyz@!" 
===============================================================================
Connectivity Association "abcdefghijklmnoprstuvxyz@!"
===============================================================================
Admin State        : Up
Description        : alsfjalsfjafja;lsjflasjflasjfl
Replay Protection  : Disabled
Replay Window Size : 333
Macsec Encrypt     : Enabled
Clear Tag Mode     : dual-tag
Cipher Suite       : gcm-aes-256
Encryption Offset  : 30
Assigned ports     : 2/1/9 2/1/10 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : aabbccddeeff00112233445566778899
===============================================================================
Output Fields: show macsec connectivity-association <ca-name>

Output Fields: show macsec connectivity-association <ca-name> describes the output fields for the show macsec connectivity-association <ca-name> command.

Table 24. Output Fields: show macsec connectivity-association <ca-name>

Label

Description

Admin State

Up — The CA is administratively up.

Down — The CA is administratively down.

If port <x/y/z> ethernet>macsec is shutdown, the admin state will be down. Otherwise, the admin state is up.

Description

Specifies a user description for this CA.

Replay Protection

Enabled — Replay Protection is enabled.

Disabled — Replay Protection is disabled.

If replay protection is enabled for this CA, the out of window packet will be discarded.

Replay Window Size

Specifies the size, in packets, of the replay window.

Macsec Encrypt

Enabled — MACsec is enabled.

Disabled — MACsec is disabled.

Clear Tag Mode

Specifies the clear tag mode: single-tag, dual-tag.

Cipher Suite

Specifies the cipher suite used for encrypting the SAK: gcm-aes-128, gcm-aes-256, gcm-aes-xpn-128, gcm-aes-xpn-256.

Encryption Offset

Specifies the encryption offset configured on this node: 0, 30, 50.

Assigned ports

Specifies all ports that contain this CA.

MKA Key Server Priority

Specifies the MKA key server priority: 0-255 (default 16).

Active Pre-Shared Key Index

Specifies the active pre-shared key index: 1-2 (default 1).

Active Pre-Shared Key CKN

Specifies the active PSK CAK name.

Output Example: show macsec connectivity-association <ca-name> detail
A:Dut-C# show macsec connectivity-association "abcdefghijklmnoprstuvxyz@!" detail 
===============================================================================
Connectivity Association "abcdefghijklmnoprstuvxyz@!"
===============================================================================
Admin State        : Up
Description        : alsfjalsfjafja;lsjflasjflasjfl
Replay Protection  : Disabled
Replay Window Size : 333
Macsec Encrypt     : Enabled
Clear Tag Mode     : dual-tag
Cipher Suite       : gcm-aes-256
Encryption Offset  : 30
Assigned ports     : 2/1/9 2/1/10 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : aabbccddeeff00112233445566778899
===============================================================================

convergence

convergence

Syntax

convergence [family]

Context

[Tree] (show>router>bgp convergence)

Full Context

show router bgp convergence

Description

This command displays information about how the router reconverged its routing state after the last restart of BGP.

Parameters

family

Specifies an address family for which to display BGP route convergence information.

Values

ipv4, ipv6, vpn-ipv4, vpn-ipv6, label-ipv4, label-ipv6

Platforms

All

Output

Show Router BGP Convergence Field Descriptions describes the BGP convergence output fields.

Use the following command to display BGP route convergence information for routes of all address families.

show router bgp convergence
Output Example
===============================================================================
BGP IPv4 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 0
Current established peers                   : 0
First session established time              : 00h00m00s
Last session established time               : 00h00m00s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : converged
Converged time                              : 00h01m22s
===============================================================================

===============================================================================
BGP VPN-IPv4 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 1
Current established peers                   : 1
First session established time              : 00h00m52s
Last session established time               : 00h00m52s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : timeout
Converged time                              : N/A
===============================================================================

===============================================================================
BGP IPv6 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 0
Current established peers                   : 0
First session established time              : 00h00m00s
Last session established time               : 00h00m00s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : converged
Converged time                              : 00h01m22s
===============================================================================
                                      
===============================================================================
BGP VPN-IPv6 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 0
Current established peers                   : 0
First session established time              : 00h00m00s
Last session established time               : 00h00m00s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : converged
Converged time                              : 00h01m22s
===============================================================================

===============================================================================
BGP LABEL-IPv4 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 0
Current established peers                   : 0
First session established time              : 00h00m00s
Last session established time               : 00h00m00s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : converged
Converged time                              : 00h01m22s
===============================================================================

===============================================================================
BGP LABEL-IPv6 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 0
Current established peers                   : 0
First session established time              : 00h00m00s
Last session established time               : 00h00m00s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : converged
Converged time                              : 00h01m22s
===============================================================================

Use the following command to display BGP route convergence information for IPv4 VPN routes.

show router bgp convergence vpn-ipv4
Output Example
===============================================================================
BGP VPN-IPv4 Convergence
===============================================================================
Min wait advertise timer                    : 30
Established peers at min wait timer expiry  : 1
Current established peers                   : 1
First session established time              : 00h00m52s
Last session established time               : 00h00m52s
Max Wait advertise timer                    : 90
Converged peers                             : 0
Converged state                             : timeout
Converged time                              : N/A
===============================================================================
Table 25. Show Router BGP Convergence Field Descriptions

Label

Description

Min wait advertise timer

The operational value of min-wait-to-advertise (0 if the feature is disabled)

Use the min-wait-to-advertise command in the configure router bgp convergence context to configure the minimum amount of time BGP waits after the first session is established, following a BGP-instance restart, before it advertises any routes in a specific set of address families.