s Commands – Part I
s-pmsi
s-pmsi
Syntax
s-pmsi [[group-ip group-ip][source-ip source-ip] detail]
s-pmsi [mdSrcAddr [mdGrpAddr]] [[group-ip group-ip] [source-ip source-ip] detail]
s-pmsi ext-tunnel-id ext-tunnel-id [tunnel-id tunnel-id] [[group-ip group-ip] [source-ip source-ip] detail]
s-pmsi root-addr root-addr [lsp-id lsp-id] [[group-ip group-ip] [source-ip source-ip] detail]
s-pmsi bier-root-addr ip-address [[sub-domain sub-domain] [bfr-id bfr-id] [mpls-lbl mpls-lbl] detail]
Context
[Tree] (show>router>pim s-pmsi)
Full Context
show router pim s-pmsi
Description
This command displays information about selective provider multicast service interfaces that are currently active.
Parameters
- group-ip
-
Displays group IP address information.
- source-ip
-
Displays source IP address information.
- mdSrcAddr
-
Displays source address information of the multicast sender.
- mdGrpAddr
-
Displays group address information of the multicast sender.
- ext-tunnel-id
-
Displays information about the extended tunnel address.
- tunnel-id
-
Displays information about the tunnel identifier.
- root-addr
-
Displays information about the root address.
- lsp-id
-
Displays information about the specified LSP ID.
- sub-domain
-
Displays information about the BIER sub-domain ID.
- bfr-id
-
Displays information about the BIER-ID of the router.
- mpls-lbl
-
Displays information about the specified MPLS service label.
- detail
-
Displays detailed output.
Platforms
All
Output
The following output is an example of a PIM data MDT configuration. Output fields: PIM data MDT provides PIM data MDT descriptions.
Output Example PIM Selective Provider Tunnel*B:node-6# show router 100 pim s-pmsi
===============================================================================
PIM Selective provider tunnels
===============================================================================
MD Src Address MD Grp Address MT Index Num VPN SGs
-------------------------------------------------------------------------------
239.200.200.7 239.0.89.72 24603 1
239.200.200.7 239.0.89.73 24604 1
239.200.200.7 239.0.89.74 24605 1
239.200.200.7 239.0.89.75 24606 1
239.200.200.7 239.0.89.76 24607 1
239.200.200.7 239.0.89.77 24608 1
239.200.200.7 239.0.89.78 24609 1
239.200.200.7 239.0.89.79 24610 1
239.200.200.7 239.0.89.80 24611 1
239.200.200.7 239.0.89.81 24612 1
239.200.200.7 239.0.89.82 24613 1
239.200.200.7 239.0.89.83 24614 1
239.200.200.7 239.0.89.84 24615 1
239.200.200.7 239.0.89.85 24616 1
239.200.200.7 239.0.89.86 24617 1
239.200.200.7 239.0.89.87 24618 1
...
===============================================================================
*B:node-6#
*B:node-6# show router 100 pim s-pmsi detail
===============================================================================
PIM Selective provider tunnels
===============================================================================
Md Source Address : 239.200.200.7 Md Group Address : 239.0.89.72
Number of VPN SGs : 1 Uptime : 0d 00:00:18
MT IfIndex : 24603 Egress Fwding Rate : 163.2 kbps
VPN Group Address : 239.1.0.0 VPN Source Address : 10.2.102.1
State : RX Joined
Expiry Timer : 0d 00:02:41
===============================================================================
PIM Selective provider tunnels
===============================================================================
Md Source Address : 239.200.200.7 Md Group Address : 239.0.89.73
Number of VPN SGs : 1 Uptime : 0d 00:00:18
MT IfIndex : 24604 Egress Fwding Rate : 163.2 kbps
VPN Group Address : 239.1.0.1 VPN Source Address : 10.2.102.1
State : RX Joined
Expiry Timer : 0d 00:02:41
===============================================================================
PIM Selective provider tunnels
===============================================================================
Md Source Address : 239.200.200.7 Md Group Address : 239.0.89.74
Number of VPN SGs : 1 Uptime : 0d 00:00:20
MT IfIndex : 24605 Egress Fwding Rate : 165.7 kbps
VPN Group Address : 239.1.0.2 VPN Source Address : 10.2.102.1
State : RX Joined
Expiry Timer : 0d 00:02:39
===============================================================================
PIM Selective provider tunnels
===============================================================================
Md Source Address : 239.200.200.7 Md Group Address : 239.0.89.75
Number of VPN SGs : 1 Uptime : 0d 00:00:20
MT IfIndex : 24606 Egress Fwding Rate : 165.7 kbps
VPN Group Address : 239.1.0.3 VPN Source Address : 10.2.102.1
State : RX Joined
Expiry Timer : 0d 00:02:39
===============================================================================
*B:node-6#
B:Dut-E# show router 100 pim s-pmsi
===============================================================================
PIM Selective provider tunnels
===============================================================================
MD Src Address MT Index Num VPN SGs MD RP for ASM State
MD Grp Address Multistream ID
-------------------------------------------------------------------------------
10.20.1.5 5798467 1 N/A TX Joined
233.0.0.5 5
10.20.1.5 5798468 1 N/A TX Joined
233.0.0.6 6
10.20.1.5 5798469 1 N/A TX Joined
233.0.0.7 7
10.20.1.5 5798470 1021 N/A TX Joined
233.0.0.8 8
===============================================================================
PIM Selective provider tunnels Interfaces : 4
*A:Dut-C# show router 1 pim s-pmsi
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2mp ID Tunnel ID Ext Tunnel Adrs SPMSI Index Num VPN State
SGs
-------------------------------------------------------------------------------
0 0 10.20.1.4 1030144 1 RX Tracking
0 0 10.20.1.4 1030144 1 RX Tracking
===============================================================================
PIM RSVP Spmsi Interfaces : 2
===============================================================================
*A:Dut-C# show router 21 pim s-pmsi
====================================================================
PIM LDP Spmsi tunnels
====================================================================
Lsp ID Root Addr SPMSI Index Num VPN State
SGs
--------------------------------------------------------------------
0 10.20.1.4 1030144 1 RX Tracking
0 10.20.1.4 1030144 1 RX Tracking
====================================================================
PIM LDP Spmsi Interfaces : 2
====================================================================
*A:Dut-C#
*A:Dut-C# show router 1 pim s-pmsi detail
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 0 Tunnel ID : 0
Ext Tunnnel Addrs : 10.20.1.4 Spmsi IfIndex : 1030144
Number of VPN SGs : 1 Uptime : 0d 00:02:48
VPN Group Address : 239.100.0.0
VPN Source Address : 10.1.101.2
State : RX Tracking Mdt Threshold : 0
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 0 Tunnel ID : 0
Ext Tunnnel Addrs : 10.20.1.4 Spmsi IfIndex : 1030144
Number of VPN SGs : 1 Uptime : 0d 00:02:47
VPN Group Address : ff0e:db8:225:100::
VPN Source Address : 2001:db8:1:101::2
State : RX Tracking Mdt Threshold : 0
===============================================================================
PIM RSVP Spmsi Interfaces : 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router 21 pim s-pmsi detail
===============================================================================
PIM LDP Spmsi tunnels
===============================================================================
LSP ID : 0
Root Addr : 10.20.1.4 Spmsi IfIndex : 1030144
Number of VPN SGs : 1 Uptime : 0d 00:03:35
VPN Group Address : 239.100.0.0
VPN Source Address : 10.1.101.2
State : RX Tracking Mdt Threshold : 0
===============================================================================
PIM LDP Spmsi tunnels
===============================================================================
LSP ID : 0
Root Addr : 10.20.1.4 Spmsi IfIndex : 1030144
Number of VPN SGs : 1 Uptime : 0d 00:03:34
VPN Group Address : ff0e:db8:225:100::
VPN Source Address : 2001:db8:1:101::2
State : RX Tracking Mdt Threshold : 0
===============================================================================
PIM LDP Spmsi Interfaces : 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router 1 pim s-pmsi detail
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 1 Tunnel ID : 61442
Ext Tunnnel Addrs : 10.20.1.4 Spmsi IfIndex : 74230
Number of VPN SGs : 1 Uptime : 0d 00:05:11
VPN Group Address : 239.100.0.0
VPN Source Address : 10.1.101.2
State : TX Join Pending Mdt Threshold : 1
Join Timer : N/A Holddown Timer : 0d 00:00:47
Receiver Count : 4
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 1 Tunnel ID : 61443
Ext Tunnnel Addrs : 10.20.1.4 Spmsi IfIndex : 74231
Number of VPN SGs : 1 Uptime : 0d 00:05:10
VPN Group Address : ff0e:225:100::
VPN Source Address : 2001:db8:1:101::2
State : TX Join Pending Mdt Threshold : 1
Join Timer : N/A Holddown Timer : 0d 00:00:50
Receiver Count : 4
===============================================================================
PIM RSVP Spmsi Interfaces : 2
===============================================================================
*A:Dut-C#
*A:Dut-D# show router 21 pim s-pmsi detail
===============================================================================
PIM LDP Spmsi tunnels
===============================================================================
LSP ID : 8194
Root Addr : 10.20.1.4 Spmsi IfIndex : 74228
Number of VPN SGs : 1 Uptime : 0d 00:05:56
VPN Group Address : 239.100.0.0
VPN Source Address : 10.1.101.2
State : TX Join Pending Mdt Threshold : 1
Join Timer : N/A Holddown Timer : 0d 00:00:02
Receiver Count : 4
===============================================================================
PIM LDP Spmsi tunnels
===============================================================================
LSP ID : 8195
Root Addr : 10.20.1.4 Spmsi IfIndex : 74229
Number of VPN SGs : 1 Uptime : 0d 00:05:55
VPN Group Address : ff0e:db8:225:100::
VPN Source Address : 2001:db8:1:101::2
State : TX Join Pending Mdt Threshold : 1
Join Timer : N/A Holddown Timer : 0d 00:00:05
Receiver Count : 4
===============================================================================
PIM LDP Spmsi Interfaces : 2
===============================================================================
*A:Dut-D#
|
Label |
Description |
|---|---|
|
MD Grp Address |
The IP multicast group address for which this entry contains information |
|
MD Src Address |
The source address of the multicast sender. The value is 0 if the type is configured as starg. The address of the Rendezvous Point (RP) displays if the type is configured as starRP. |
|
MT Index |
The index number |
|
Num VP SGs |
The VPN number |
s-pmsi
Syntax
s-pmsi [source mdSrcAddr] [group mdGrpAddr] [vprn-source vprnSrcAddr vprn-group vprnGrpAddr]
Context
[Tree] (clear>router>pim s-pmsi)
Full Context
clear router pim s-pmsi
Description
This command clears PIM selective provider multicast service interface cache.
Parameters
- mdSrcAddr
-
Clears the specified source address used for Multicast Distribution Tree (MDT).
- mdGrpAddr
-
Clears the specified group address used for Multicast Distribution Tree (MDT).
- vprnSrcAddr
-
Clears the specified source address of the multicast sender.
- vprnGrpAddr
-
Clears the specified multicast group address.
Platforms
All
s11
s11
Syntax
s11
Context
[Tree] (show>subscr-mgmt>gtp s11)
Full Context
show subscriber-mgmt gtp s11
Description
Commands in this context display information related to established S11 connections.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
s11
Syntax
s11
Context
[Tree] (show>router>gtp s11)
Full Context
show router gtp s11
Description
Commands in this context display S11 information.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
saa
saa
Syntax
saa [test-name] [owner test-owner]
Context
[Tree] (show saa)
Full Context
show saa
Description
This command displays information about the SAA test.
If no specific test is specified a summary of all configured tests is displayed.
If a specific test is specified then detailed test results for that test are displayed for the last three occurrences that this test has been executed, or since the last time the counters have been reset via a system reboot or clear command.
Parameters
- test-name
-
Specifies the optional parameter is used to enter the name of the SAA test for which the information needs to be displayed. The test name must already be configured in the config>saa>test context.
- test-owner
-
Specifies the owner of an SAA operation, up to 32 characters. If a test-owner value is not specified, tests created by the CLI have a default owner "TiMOS CLI”.
Platforms
All
Output
The following output is an example of SAA test information. Output fields: SAA describes the SAA test fields.
Output Example*A:bksim130>config>saa>test>trap-gen# show saa mySaaPingTest1
===============================================================================
SAA Test Information
===============================================================================
Test name : mySaaPingTest1
Owner name : TiMOS CLI
Description : N/A
Accounting policy : None
Administrative status : Disabled
Test type : icmp-ping 11.22.33.44
Trap generation : probe-fail-enable probe-fail-threshold 3
test-fail-enable test-fail-threshold 2
test-completion-enable
Test runs since last clear : 0
Number of failed test runs : 0
Last test result : Undetermined
-------------------------------------------------------------------------------
Threshold
Type Direction Threshold Value Last Event Run #
-------------------------------------------------------------------------------
Jitter-in Rising None None Never None
Falling None None Never None
Jitter-out Rising None None Never None
Falling None None Never None
Jitter-rt Rising None None Never None
Falling None None Never None
Latency-in Rising None None Never None
Falling None None Never None
Latency-out Rising None None Never None
Falling None None Never None
Latency-rt Rising None None Never None
Falling None None Never None
Loss-in Rising None None Never None
Falling None None Never None
Loss-out Rising None None Never None
Falling None None Never None
Loss-rt Rising None None Never None
Falling None None Never None
===============================================================================
*A:bksim130>config>saa>test>trap-gen#
*A:bksim130>config>saa>test>trap-gen$ show saa mySaaTraceRouteTest1
===============================================================================
SAA Test Information
===============================================================================
Test name : mySaaTraceRouteTest1
Owner name : TiMOS CLI
Description : N/A
Accounting policy : None
Administrative status : Disabled
Test type : icmp-trace 11.22.33.44
Trap generation : test-fail-enable test-completion-enable
Test runs since last clear : 0
Number of failed test runs : 0
Last test result : Undetermined
-------------------------------------------------------------------------------
Threshold
Type Direction Threshold Value Last Event Run #
-------------------------------------------------------------------------------
Jitter-in Rising None None Never None
Falling None None Never None
Jitter-out Rising None None Never None
Falling None None Never None
Jitter-rt Rising None None Never None
Falling None None Never None
Latency-in Rising None None Never None
Falling None None Never None
Latency-out Rising None None Never None
Falling None None Never None
Latency-rt Rising None None Never None
Falling None None Never None
Loss-in Rising None None Never None
Falling None None Never None
Loss-out Rising None None Never None
Falling None None Never None
Loss-rt Rising None None Never None
Falling None None Never None
===============================================================================
*A:bksim130>config>saa>test>trap-gen$
show saa <test-name>
CFM Loopback:
===============================================================================
SAA Test Information
===============================================================================
Test name : CFMLoopbackTest
Owner name : TiMOS CLI
Description : N/A
Accounting policy : 1
Continuous : Yes
Administrative status : Enabled
Test type : eth-cfm-
loopback 00:01:01:01:01:01 mep 1 domain 1 association 1 interval 1 count 10
Trap generation : None
Test runs since last clear : 1
Number of failed test runs : 0
Last test result : Success
-------------------------------------------------------------------------------
Threshold
Type Direction Threshold Value Last Event Run #
-------------------------------------------------------------------------------
Jitter-in Rising None None Never None
Falling None None Never None
Jitter-out Rising None None Never None
Falling None None Never None
Jitter-rt Rising None None Never None
Falling None None Never None
Latency-in Rising None None Never None
Falling None None Never None
Latency-out Rising None None Never None
Falling None None Never None
Latency-rt Rising None None Never None
Falling None None Never None
Loss-in Rising None None Never None
Falling None None Never None
Loss-out Rising None None Never None
Falling None None Never None
Loss-rt Rising None None Never None
Falling None None Never None
===============================================================================
Test Run: 1
Total number of attempts: 10
Number of requests that failed to be sent out: 0
Number of responses that were received: 10
Number of requests that did not receive any response: 0
Total number of failures: 0, Percentage: 0
(in us) Min Max Average Jitter
Outbound : 0.000 0.000 0.000 0
Inbound : 0.000 0.000 0.000 0
Roundtrip : 10200 10300 10250 100
Per test packet:
Sequence Result Delay(us)
1 Response Received 10300
2 Response Received 10300
3 Response Received 10300
4 Response Received 10200
5 Response Received 10300
6 Response Received 10200
7 Response Received 10300
8 Response Received 10200
9 Response Received 10300
10 Response Received 10300
=======================================================================
CFM Traceroute:
===============================================================================
SAA Test Information
===============================================================================
Test name : CFMLinkTraceTest
Owner name : TiMOS CLI
Description : N/A
Accounting policy : None
Continuous : Yes
Administrative status : Enabled
Test type : eth-cfm-
linktrace 8A:DB:01:01:00:02 mep 1 domain 1 association 1 interval 1
Trap generation : None
Test runs since last clear : 1
Number of failed test runs : 0
Last test result : Success
-------------------------------------------------------------------------------
Threshold
Type Direction Threshold Value Last Event Run #
-------------------------------------------------------------------------------
Jitter-in Rising None None Never None
Falling None None Never None
Jitter-out Rising None None Never None
Falling None None Never None
Jitter-rt Rising None None Never None
Falling None None Never None
Latency-in Rising None None Never None
Falling None None Never None
Latency-out Rising None None Never None
Falling None None Never None
Latency-rt Rising None None Never None
Falling None None Never None
Loss-in Rising None None Never None
Falling None None Never None
Loss-out Rising None None Never None
Falling None None Never None
Loss-rt Rising None None Never None
Falling None None Never None
===============================================================================
Test Run: 1
HopIdx: 1
Total number of attempts: 3
Number of requests that failed to be sent out: 0
Number of responses that were received: 3
Number of requests that did not receive any response: 0
Total number of failures: 0, Percentage: 0
(in ms) Min Max Average Jitter
Outbound : 0.000 0.000 0.000 0.000
Inbound : 0.000 0.000 0.000 0.000
Roundtrip : 2.86 3.67 3.15 0.047
Per test packet:
Sequence Outbound Inbound RoundTrip Result
1 0.000 0.000 3.67 Response Received
2 0.000 0.000 2.92 Response Received
3 0.000 0.000 2.86 Response Received
HopIdx: 2
Total number of attempts: 3
Number of requests that failed to be sent out: 0
Number of responses that were received: 3
Number of requests that did not receive any response: 0
Total number of failures: 0, Percentage: 0
(in ms) Min Max Average Jitter
Outbound : 0.000 0.000 0.000 0.000
Inbound : 0.000 0.000 0.000 0.000
Roundtrip : 4.07 4.13 4.10 0.005
Per test packet:
Sequence Outbound Inbound RoundTrip Result
1 0.000 0.000 4.10 Response Received
2 0.000 0.000 4.13 Response Received
3 0.000 0.000 4.07 Response Received
==================================
CFM Two Way Delay Measurement:
===============================================================================
SAA Test Information
===============================================================================
Test name : CFMTwoWayDelayTest
Owner name : TiMOS CLI
Description : N/A
Accounting policy : None
Continuous : Yes
Administrative status : Enabled
Test type : eth-cfm-two-way-
delay 00:01:01:01:01:01 mep 1 domain 1 association 1 interval 1
Trap generation : None
Test runs since last clear : 1
Number of failed test runs : 0
Last test result : Success
-------------------------------------------------------------------------------
Threshold
Type Direction Threshold Value Last Event Run #
-------------------------------------------------------------------------------
Jitter-in Rising None None Never None
Falling None None Never None
Jitter-out Rising None None Never None
Falling None None Never None
Jitter-rt Rising None None Never None
Falling None None Never None
Latency-in Rising None None Never None
Falling None None Never None
Latency-out Rising None None Never None
Falling None None Never None
Latency-rt Rising None None Never None
Falling None None Never None
Loss-in Rising None None Never None
Falling None None Never None
Loss-out Rising None None Never None
Falling None None Never None
Loss-rt Rising None None Never None
Falling None None Never None
...
===============================================================================
Test Run: 1
HopIdx: 1
Total number of attempts: 3
Number of requests that failed to be sent out: 0
Number of responses that were received: 3
Number of requests that did not receive any response: 0
Total number of failures: 0, Percentage: 0
Total number of failures: 0, Percentage: 0
(in us) Min Max Average Jitter
Outbound : 5095 5095 5095 0
Inbound : 5095 5095 0.000 0
Roundtrip : 10190 10190 10190 0
Per test packet:
Sequence (in us) Outbound Inbound Delay Delay variation
1 5195 5195 10190 0
2 5195 5195 10190 0
3 5195 5195 10190 0
...
===============================================================================
|
Label |
Description |
|---|---|
|
Test Name |
Specifies the name of the test. |
|
Owner Name |
Specifies the owner of the test. |
|
Description |
Specifies the description for the test type. |
|
Accounting policy |
Specifies the associated accounting policy ID. |
|
Administrative status |
Specifies whether the administrative status is enabled or disabled. |
|
Test type |
Specifies the type of test configured. |
|
Trap generation |
Specifies the trap generation for the SAA test. |
|
Test runs since last clear |
Specifies the total number of tests performed since the last time the tests were cleared. |
|
Number of failed tests run |
Specifies the total number of tests that failed. |
|
Last test run |
Specifies the last time a test was run. |
|
Threshold type |
Indicates the type of threshold event being tested, jitter-event, latency-event, or loss-event, and the direction of the test responses received for a test run: in — inbound out — outbound rt — roundtrip |
|
Direction |
Indicates the direction of the event threshold, rising or falling. |
|
Threshold |
Displays the configured threshold value. |
|
Value |
Displays the measured crossing value that triggered the threshold crossing event. |
|
Last event |
Indicates the time that the threshold crossing event occurred. |
|
Run # |
Indicates what test run produced the specified values. |
saa
Syntax
saa-test [test-name [owner test-owner]]
Context
[Tree] (clear saa)
Full Context
clear saa
Description
This command clears the SAA results for the latest and the history for this test. If the test name is omitted, all the results for all tests are cleared.
Parameters
- test-name
-
Specifies the name of the SAA test. The test name must already be configured in the config>saa>test context.
- test-owner
-
Specifies the owner of an SAA operation up to 32 characters.
Platforms
All
saii-type2-using
saii-type2-using
Syntax
saii-type2-using global-id[:prefix[:ac-id]]
Context
[Tree] (show>service saii-type2-using)
Full Context
show service saii-type2-using
Description
This command displays the SDP used by a spoke SDP FEC with a specified FEC129 Type 2 SAII.
Parameters
- global-id[:prefix[:ac-id]]
-
Specifies the switch-point information using SAII-Type2.
Platforms
All
Output
The following output is an example of SAII information.
Output Example*A:Dut-E# show service saii-type2-using 3:10.20.1.3:1
===================================================================
Service Switch-Point Information
===================================================================
SvcId Oper-SdpBind SAII-Type2
-------------------------------------------------------------------
2147483598 17407:4294967195 3:10.20.1.3:1
-------------------------------------------------------------------
Entries found: 1
===================================================================
sap
sap
Syntax
sap {all | sap-id}
Context
[Tree] (show>subscr-mgmt>errors sap)
Full Context
show subscriber-mgmt errors sap
Description
This command sorts all the subscriber errors by SAP.
Parameters
- all
-
Shows all errors starting with the lowest SAP index.
- sap-id
-
Shows only the error of a specific SAP index.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber management errors listed by SAP.
Output ExampleA:BNG-2# show subscriber-mgmt errors sap all
===============================================================================
Subscriber management errors
===============================================================================
-------------------------------------------------------------------------------
SAP : 1/1/20:841
-------------------------------------------------------------------------------
Time : 2016/06/23 17:35:46.0
Service : 1000
MAC : 00:00:10:10:12:13
Error : No Offer from DHCP server after Discover from DHCP client
Extra : DHCPv4
Time : 2016/06/23 17:35:16.0
Service : 1000
MAC : 00:00:10:10:12:13
Error : No Offer from DHCP server after Discover from DHCP client
Extra : DHCPv4
===============================================================================
Output fields: subscriber management SAP error describes subscriber management SAP error output fields.
|
Field |
Description |
|---|---|
|
SAP |
The SAP ID associated with the error |
|
Time |
The time this error was reported to the subscriber management errors subsystem |
|
Service |
The service ID associated with the error |
|
MAC |
The MAC address associated with the error |
|
Error |
The error that occurred on the SAP |
|
Extra |
Extra information about the error that occurred |
sap
Syntax
sap sap-id static-isids [range-id range-id]
sap sap-id dist-cpu-protection [detail]
sap sap-id detail
sap sap-id encap-group group-name [member encap-id] [encap-detail | encap-stats]
sap sap-id encap-group
sap sap-id [ base | dhcp | mc-ring | mcac | mrp | qos | sap-stats | stats | stp | sub-mgmt | ipsec-gw]
sap sap-id [circuit-id circuit-id] [mac ieee-address] [remote-id remote-id] host-lockout-policy [summary]
sap queue-depth [queue queue-id] [ingress | egress]
sap
sap sap-id static-isids mfib
sap sap-id queue-group-redirection [ingress | egress]
Context
[Tree] (show>service>id sap)
Full Context
show service id sap
Description
This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters
- sap-id
-
The ID that displays SAPs for the service.
- detail
-
Displays detailed information for the SAP. For dist-cpu-protection, detail includes the adapted operational rate parameters in the CLI output. The adapted Oper. parameters are only applicable if the policer is instantiated (for example, if the associated forwarding plane is operational, or for an interface if there is a physical port configured for the interface, or if the dynamic policers are allocated), otherwise values of 0 kb/s, and so on, are displayed.
- static-isids
-
Displays static ISIDs for the SAP.
- range-id
-
Specifies the range ID.
- dist-cpu-protection
-
Displays information about the distributed CPU protection policy and parameters associated with the SAP.
- group-name
-
Specifies the group name, up to 32 characters in length.
- encap-id
-
Specifies the encapsulation ID.
- encap-detail
-
Displays encapsulation details for the specified encapsulation ID.
- encap-stats
-
Displays encapsulation statistics.
- encap-group
-
Displays the encapsulation group.
- base
-
Displays base information.
- dhcp
-
Displays DHCP information.
- mc-ring
-
Displays MC ring information.
- mcac
-
Displays MCAC information.
- mrp
-
Displays MRP information.
- qos
-
Displays QoS information.
- sap-stats
-
Displays SAP statistics.
- stats
-
Displays statistics.
- stp
-
Displays STP information.
- sub-mgmt
-
Displays subscriber management information.
- ipsec-gw
-
Displays IPSEC gateway information.
- circuit-id
-
Specifies the circuit ID, up to 256 characters.
- ieee-address
-
Specifies the IEEE address, up to 30 characters.
- remote-id
-
Specifies the remote-ID, up to 256 characters.
- host-lockout-policy
-
Displays the host lockout policy.
- summary
-
Displays summary information.
- queue-id
-
Specifies the queue ID.
- ingress
-
Displays ingress information.
- egress
-
Displays egress information.
- mfib
-
Displays MFIB information.
- queue-group-redirection
-
The output lists the queue group name and the instances configured in the related queue group redirect list. For each instance, the FP (for ingress) and port (for egress) is displayed. If there is a mismatch between the SAP and redirect list configuration and the queue group instance configuration, this is highlighted.
- ingress
-
Displays information for the ingress policy.
- egress
-
Displays information for the egress policy.
Platforms
All
Output
The following output is an example of SAP information, and Output fields: service ID SAP describes the output fields.
Output Exampleshow service id "BD20023" sap lag-1:200 detail===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 20023
SAP : lag-1:200 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 02/09/2023 15:35:22
Last Mgmt Change : 02/09/2023 15:35:12
Sub Type : regular
Split Horizon Group: (Not Specified)
Etree Root Leaf Tag: Disabled Etree Leaf Tag : 0
Etree Leaf AC : Disabled
Max Nbr of MAC Addr: No Limit Total MAC Addr : 2
Learned MAC Addr : 2 Static MAC Addr : 0
OAM MAC Addr : 0 DHCP MAC Addr : 0
Host MAC Addr : 0 Intf MAC Addr : 0
SPB MAC Addr : 0 Cond MAC Addr : 0
BGP EVPN Addr : 0 EVPN Static Addr : 0
Admin MTU : 1518 Oper MTU : 1518
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Egr Agg Rate Limit : max
Limit Unused BW : Disabled
ARP Reply Agent : Disabled Host Conn Verify : Disabled
SHCV pol IPv4 : None
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled Mac Pinning : Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
Vlan-translation : None
Qinq-vlan- Qinq-vlan-
translation : None translation Ids : None
Acct. Pol : None Collect Stats : Disabled
Anti Spoofing : None Dynamic Hosts : Enabled
Avl Static Hosts : 0 Tot Static Hosts : 0
Calling-Station-Id : n/a
Application Profile: None
Transit Policy : None
Oper Group : (none) Monitor Oper Grp : (none)
Host Lockout Plcy : n/a
Lag Link Map Prof : (none)
Lag Per Link Hash
Class : 1 Weight : 1
Oper Class : 1 Oper Weight : 1
Override : false
Cflowd : Disabled
Bandwidth : Not-Applicable
Oper DCpu Prot Pol : _default-access-policy
MCAC Policy Name : MCAC Const Adm St : Enable
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
Use LAG port weight: no
MCAC If-Policy Name:
Restr MacUnpr Dst : Disabled (oper: Disabled)
Auto Learn Mac Prot: Disabled (oper: Disabled)
ALMP Exclude List : <none>
Oper ALMP Excl List: <none>
RestMacProtSrc Act : none (oper: Discard-frame)
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Auth Policy : None
DestMac Rewrite : Disabled
Proc CPM Tfc Sap Dn: Disabled
SendBvplsEvpnFlush : Enabled
Bgp-Vpls MH VeId : <none>
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults : n/a AIS : Disabled
MC Prop-Hold-Timer : n/a V-MEP Filtering : Disabled
Squelch Levels : None
Squelch Ctag Levels: None
Collect Lmm Stats : Disabled
LMM FC Stats : None
LMM FC In Prof : None
-------------------------------------------------------------------------------
Stp Service Access Point specifics
-------------------------------------------------------------------------------
Stp Admin State : Up Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : N/A Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
CIST Desig Bridge : N/A Designated Port : N/A
Forward transitions: 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
MST BPDUs rcvd : 0 MST BPDUs tx : 0
-------------------------------------------------------------------------------
ARP host
-------------------------------------------------------------------------------
Admin State : outOfService
Host Limit : 1 Min Auth Interval : 15 minutes
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
Ing ip-match tag : none Ing ipv6-match tag: none
I. Sched Pol : (Not Specified)
E. Sched Pol : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
Hw Agg Shaper Q Set: No
Hw Agg Shpr QSet Sz: 0
Hw Agg Shpr In-Use : No
-------------------------------------------------------------------------------
DHCP
-------------------------------------------------------------------------------
Description : (Not Specified)
Admin State : Down Lease Populate : 0
DHCP Snooping : Down Action : Keep
Proxy Admin State : Down
Proxy Lease Time : N/A
Emul. Server Addr : Not Configured
-------------------------------------------------------------------------------
DHCP6
-------------------------------------------------------------------------------
Description : (Not Specified)
LDRA : Enabled
Interface-type : client-facing
Interface-Id : ascii-tuple
Remote-Id : mac
-------------------------------------------------------------------------------
Subscriber Management
-------------------------------------------------------------------------------
Admin State : Down MAC DA Hashing : False
Def Sub-Id : None
Def Sub-Profile : None
Def SLA-Profile : None
Def Inter-Dest-Id : None
Def App-Profile : None
Sub-Ident-Policy : None
Subscriber Limit : 1
Single-Sub-Parameters
Prof Traffic Only : False
Non-Sub-Traffic : N/A
Static host management
MAC learn options : N/A
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress
Aggregate Offered : 2 136
Aggregate Forwarded : 2 136
Aggregate Dropped : 0 0
Egress
Aggregate Forwarded : 674 50140
Aggregate Dropped : 0 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time : N/A
Packets Octets
CPM Ingress : 92 5740
Forwarding Engine Stats
Dropped : 0 0
Received Valid : 2 136
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 2 136
Off. Managed : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 2 136
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
For. In/InplusProf : 674 50140
For. Out/ExcProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Ingress Queue 11 (Multipoint) (Priority)
Off. Combined : 2 136
Off. Managed : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 2 136
Egress Queue 1
For. In/InplusProf : 674 50140
For. Out/ExcProf : 0 0
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
===============================================================================
show service id 4 sap 1/1/c1/1:45 detail ===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 4
SAP : 1/1/c1/1:45 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 04/02/2024 18:08:35
Last Mgmt Change : 04/02/2024 18:08:26
Sub Type : regular
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
Eth Seg Name : vES-4
Admin MTU : 9208 Oper MTU : 9208
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Endpoint : N/A
Egr Agg Rate Limit : max
Q Frame-Based Acct : Disabled Limit Unused BW : Disabled
Vlan-translation : None
Qinq-vlan- Qinq-vlan-
translation : None translation Ids : None
Acct. Pol : None Collect Stats : Disabled
Application Profile: None
Transit Policy : None
Oper Group : og-4 Monitor Oper Grp : (none)
Host Lockout Plcy : n/a
Ignore Oper Down : Disabled
Lag Link Map Prof : (none)
Cflowd : Disabled
Bandwidth : Not-Applicable
Oper DCpu Prot Pol : _default-access-policy
Virtual Port : (Not Specified)
FXC VLAN normalization mode : Double (Tags 9.10)
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults : n/a AIS : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels : None
Squelch Ctag Levels: None
Collect Lmm Stats : Disabled
LMM FC Stats : None
LMM FC In Prof : None
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
Ing ip-match tag : none Ing ipv6-match tag: none
I. Sched Pol : (Not Specified)
E. Sched Pol : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
Hw Agg Shaper Q Set: No
Hw Agg Shpr QSet Sz: 0
Hw Agg Shpr In-Use : No
Latency Budget : 0 us
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress
Aggregate Offered : 0 0
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
Egress
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time : N/A
Packets Octets
CPM Ingress : 0 0
Forwarding Engine Stats
Dropped : 3 204
Received Valid : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Off. Managed : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
===============================================================================
show service id 9 sap 1/1/10:1 queue-depth===============================================================================
Queue Depth Information (Ingress SAP)
===============================================================================
-------------------------------------------------------------------------------
Name : 9->1/1/10:1->1
MBS : Def
-------------------------------------------------------------------------------
Queue Depths (percentage)
-------------------------------------------------------------------------------
0%-10% 11%-20% 21%-30% 31%-40% 41%-50% 51%-60% 61%-70% 71%-80% 81%-90% 91%-100%
-------------------------------------------------------------------------------
100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
-------------------------------------------------------------------------------
Average Elapsed Time : 0d 00:00:30
Wghtd Avg Queue Polling Interval: 100 ms
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
Queue Depth Information (Egress SAP)
===============================================================================
-------------------------------------------------------------------------------
Name : 9->1/1/10:1->1
MBS : Def
Violation Threshold Percnt: xx.xx
Violation Total Count : xxx
Violation Last Seen : Thu Mar 26 12:39:33 PDT 2020
-------------------------------------------------------------------------------
Queue Depths (percentage)
-------------------------------------------------------------------------------
0%-10% 11%-20% 21%-30% 31%-40% 41%-50% 51%-60% 61%-70% 71%-80% 81%-90% 91%-100%
-------------------------------------------------------------------------------
100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
-------------------------------------------------------------------------------
Average Elapsed Time : 0d 00:11:11
Wghtd Avg Queue Polling Interval : 100 ms
Wghtd Avg HiWtrMark Polling Interval: 1000 s
-------------------------------------------------------------------------------
===============================================================================
show service id 1 sap 1/1/1 queue-group-redirection===============================================================================
Queue Group Redirect List Information (Ingress SAP)
===============================================================================
Queue Group Redirect List : list1
Type : vxlan-vni
Queue Group : qg1
-------------------------------------------------------------------------------
Match Instance FP
-------------------------------------------------------------------------------
1 1 1/1
2 2 1/1
3 3 1/1 : mismatch
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
Queue Group Redirect List Information (Egress SAP)
===============================================================================
Queue Group Redirect List : list1
Type : vxlan-vni
Queue Group : qg1
-------------------------------------------------------------------------------
Match Instance Port
-------------------------------------------------------------------------------
1 1 1/1/1
2 2 1/1/1
3 3 1/1/1 : mismatch
-------------------------------------------------------------------------------
===============================================================================|
Label |
Description |
|---|---|
|
Service Access Points(SAP) |
|
|
Service Id |
The service identifier. |
|
SAP |
The SAP and qtag. |
|
Encap |
The encapsulation type of the SAP. |
|
Ethertype |
Specifies an Ethernet type II Ethertype value. |
|
Admin State |
The administrative state of the SAP. |
|
Oper State |
The operating state of the SAP. |
|
Flags |
Specifies the conditions that affect the operating status of this SAP. Display output includes: ServiceAdminDown, SapAdminDown, InterfaceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown, SapIngressQoSMismatch, SapEgressQoSMismatch, RelearnLimitExceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr, SapParamMismatch, CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooSmall, NoSapEpipeRingNode. |
|
Last Status Change |
Specifies the time of the most recent operating status change to this SAP. |
|
Last Mgmt Change |
Specifies the time of the most recent management-initiated change to this SAP. |
|
Admin MTU |
The desired largest service frame size (in octets) that can be transmitted through the SAP to the far-end router, without requiring the packet to be fragmented. |
|
Oper MTU |
The actual largest service frame size (in octets) that can be transmitted through the SAP to the far-end router, without requiring the packet to be fragmented. |
|
Restr MacUnpr Dst |
The administrative and operational state of the restrict unprotected destination MAC (restrict-unprotected-dst) functionality. |
|
Auto Learn Mac Prot |
The administrative and operational state of the protected MAC auto learning (auto-learn-mac-protect) functionality. |
|
RestMacProtSrc Act |
The administrative and operational state of the restrict protected source MAC (restrict-protected-src) functionality. |
|
FXC VLAN normalization mode |
The Flexible Cross Connect (FXC) VLAN normalization mode |
|
QOS |
|
|
Ingress qos-policy |
The ingress QoS policy ID assigned to the SAP. |
|
Egress qos-policy |
The egress QoS policy ID assigned to the SAP. |
|
Ingress Filter-Id |
The ingress filter policy ID assigned to the SAP. |
|
Egress Filter-Id |
The egress filter policy ID assigned to the SAP. |
|
Acct. Pol |
The accounting policy ID assigned to the SAP. |
|
Collect Stats |
Specifies whether collect stats is enabled. |
|
Dropped |
The number of packets and octets dropped due to SAP state, ingress MAC or IP filter, same segment discard, bad checksum, etc. |
|
Received Valid |
The number of valid packets and octets received on the SAP. |
|
Off. HiPrio |
The number of high priority packets and octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip. |
|
Off. LowPrio |
The number of low priority packets and octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip. |
|
Off. Uncolor |
The number of uncolored packets and octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip. |
|
Dro. HiPrio |
The number of high priority packets and octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
|
Dro. LowPrio |
The number of low priority packets and octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc. |
|
For. InProf |
The number of in-profile packets and octets (rate below CIR) forwarded by the ingress Qchip. |
|
For. OutProf |
The number of out-of-profile packets and octets discarded by the egress Qchip due to MBS exceeded, buffer pool limit exceeded, etc. |
|
Dro. InProf |
The number of in-profile packets and octets discarded by the egress Qchip due to MBS exceeded, buffer pool limit exceeded, etc. |
|
Dro. OutProf |
The number of out-of-profile packets and octets discarded by the egress Qchip due to MBS exceeded, buffer pool limit exceeded, etc. |
|
For. InProf |
The number of in-profile packets and octets (rate below CIR) forwarded by the egress Qchip. |
|
For. OutProf |
The number of out-of-profile packets and octets (rate above CIR) forwarded by the egress Qchip. |
|
Ingress TD Profile |
The profile ID applied to the ingress SAP. |
|
Egress TD Profile |
The profile ID applied to the egress SAP. |
|
Alarm Cell Handling |
The indication that OAM cells are being processed. |
|
AAL-5 Encap |
The AAL-5 encapsulation type. |
|
Mult Svc Site |
Specifies the customer’s multiservice site name. |
|
I. Sched Pol |
The ingress scheduler policy applied to the customer’s multiservice site. |
|
E. Sched Pol |
The egress scheduler policy applied to the customer’s multiservice site. |
| HW Agg Shaper Q Set | Whether the hardware aggregate shaper queue sets are in use. |
| HW Add Shpr QSet Sz | The size of the hardware aggregate shaper queue set. |
| HW Agg Shpr In-Use | Whether hardware aggregate shapers are in use. |
|
LLF Admin State |
Displays the Link Loss Forwarding administrative state. |
|
LLF Oper State |
Displays the Link Loss Forwarding operational state. |
|
pw-port |
pw-id[:qtag1[.qtag2]] pw-id[:qtag1[.qtag2]] pw-2:1.1 |
| DHCP6 | |
| LDRA | The state of the Lightweight DHCPv6 Relay Agent:
|
| Interface Type | The LDRA interface type:
|
| Interface-Id | The format for the Interface ID option:
|
| Remote-Id | The format for the Remote ID option:
|
The following output is an example of distributed CPU Protection Policer Output information.
Output fields: distributed CPU protection policer describes distributed CPU Protection Policer output fields.
Output Example*A:nodeA# show service id 33 sap 1/1/3:33 dist-cpu-protection detail
===============================================================================
Service Access Points(SAP) 1/1/3:33
===============================================================================
Distributed CPU Protection Policy : test1
-------------------------------------------------------------------------------
Statistics/Policer-State Information
===============================================================================
-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Policer-Name : arp
Card/FP : 1/1 Policer-State : Conform
Protocols Mapped : arp
Exceed-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Operational (adapted) rate parameters:
Oper. Packets : 5 ppi Oper. Within : 8 seconds
Oper. Initial Delay: 6 packets
Oper. Depth : 0 packets
Policer-Name : dhcp
Card/FP : 1/1 Policer-State : Conform
Protocols Mapped : dhcp
Exceed-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Operational (adapted) rate parameters:
Oper. Kbps : 2343 kbps Oper. MBS : 240 kilobytes
Oper. Depth : 0 bytes
… (snip)
*A:nodaA# show service id 33 sap 1/1/3:34 dist-cpu-protection detail
===============================================================================
Service Access Points(SAP) 1/1/3:34
===============================================================================
Distributed CPU Protection Policy : test2
-------------------------------------------------------------------------------
Statistics/Policer-State Information
===============================================================================
Static Policer
-------------------------------------------------------------------------------
No entries found
-------------------------------------------------------------------------------
Local-Monitoring Policer
-------------------------------------------------------------------------------
Policer-Name : my-local-mon1
Card/FP : 1/1 Policer-State : conform
Protocols Mapped : arp, pppoe-pppoa
Exceed-Count : 0
All Dyn-Plcr Alloc. : False
Operational (adapted) rate parameters:
Oper. Packets : 10 ppi Oper. Within : 8 seconds
Oper. Initial Delay: 8 packets
Oper. Depth : 0 packets
-------------------------------------------------------------------------------
Dynamic-Policer (Protocol)
-------------------------------------------------------------------------------
Protocol(Dyn-Plcr) : arp
Card/FP : 1/1 Protocol-State : not-applicable
Exceed-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Dyn-Policer Alloc. : False
Operational (adapted) rate parameters: unknown
Protocol(Dyn-Plcr) : pppoe-pppoa
Card/FP : 1/1 Protocol-State : not-applicable
Exceed-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Dyn-Policer Alloc. : False
Operational (adapted) rate parameters: unknown
-------------------------------------------------------------------------------
|
Label |
Description |
|---|---|
|
Distributed CPU Protection Policy |
The DCP policy assigned to the object. |
|
Policer-Name |
The configured name of the static policer |
|
Card/FP |
The card and FP identifier. FP identifies the instance of the FP (FastPath) chipset. Some cards have a single FP and some cards can contain multiple FPs (for example, an XCM can house multiple FPs via its two XMAs). |
|
Policer-State |
The state of the policer with the following potential values: |
|
Exceed — The policer has been detected as not conforming to the associated DCP policy parameters (for example, packets exceeded the configured rate and the DCP polling process identified this occurrence) |
|
|
Conform — The policer has been detected as conforming to the associated DCP policy parameters (rate) |
|
|
not-applicable — Newly-created policers or policers that are not currently instantiated. This includes policers configured on line cards that are not in service. |
|
|
Protocols Mapped |
A list of protocols that are configured to map to the particular policer. |
|
Oper. xyz fields |
The actual hardware may not be able to perfectly rate limit to the exact configured rate parameters in a DCP policy. In this case the configured rate parameters will be adapted to the closest supported rate. These adapted operational values are displayed in CLI when the detail keyword is included in the show command. The adapted Oper. parameters are only applicable if the policer is instantiated (for example, if the associated forwarding plane is operational, or for an interface if there is a physical port configured for the interface, or if the dynamic policers are allocated), otherwise values of 0 kb/s, and so on, are displayed. |
|
Oper. Kbps - The adapted "kilobits-per-second” value for DCP "kbps” rates |
|
|
Oper. MBS - The adapted "mbs size” value for DCP "kbps” rates |
|
|
Oper. Depth - The calculated policer bucket depth in packets (for DCP "packets” rates) or in bytes (for DCP "kbps” rates) |
|
|
Oper. Packets - The adapted "ppi” value for DCP "packets” rates |
|
|
Oper. Within - The adapted "within seconds” value for DCP "packets” rates |
|
|
Oper. Init. Delay - The adapted "initial-delay packets” value for DCP "packets” rates |
|
|
Exceed-Count |
The count of packets exceeding the policing parameters since the given policer was previously declared as conforming or newly-instantiated. This counter has the same behavior as the exceed counter in the DCP the log events, they are baselined (reset) when the policer transitions to conforming. |
|
Detec. Time Remain |
The remaining time in the detection-time countdown during which a policer in the exceed state is being monitored to see if it conforms again. |
|
Hold-Down Remain |
The remaining time in the hold-down countdown during which a policer is treating all packets as exceeding. |
|
All Dyn-Plcr Alloc. |
Indicates that all the dynamic enforcement policers have been allocated and instantiated for a given local-monitor. |
|
Dyn-Policer Alloc. |
Indicates that a dynamic policer has been instantiated. |
sap
Syntax
sap sap-id
Context
[Tree] (clear>service>id sap)
Full Context
clear service id sap
Description
This command clears information for the specified SAP.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition
Platforms
All
sap
Syntax
sap sap-id {all | cem | counters | stp | l2pt | mrp}
sap sap-id encap-group group-name [member encap-id]
Context
[Tree] (clear>service>statistics sap)
Full Context
clear service statistics sap
Description
This command clears SAP statistics for a SAP.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- all
-
Clears all SAP queue statistics and STP statistics.
- counters
-
Clears all queue statistics associated with the SAP.
- stp
-
Clears all STP statistics associated with the SAP.
- l2pt
-
Clears all L2PT statistics associated with the SAP.
- mrp
-
Clears all MRP statistics associated with the SAP.
- group-name
-
Specifies the group name, up to 32 characters.
- encap-id
-
Specifies the encapsulation ID.
Platforms
All
sap
Syntax
sap [sap-id] [level level] [primary-vlan-enabled vlan-id]
sap port port-id [level level] [primary-vlan-enabled vlan-id]
Context
[Tree] (show>eth-cfm>mip-instantiation sap)
Full Context
show eth-cfm mip-instantiation sap
Description
This command displays MIP creation information for SAPs.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- level
-
Specifies the MIP instantiation level.
- vlan-id
-
Specifies the VLAN ID to display.
- port-id
-
Specifies the port ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
sap
Syntax
sap sap-id [{ingress | egress}] [{detail | root-detail | thresholds | priority-info | depth}] [port port-id] [ arbiter {name | root }]
Context
[Tree] (show>qos>policer-hierarchy sap)
Full Context
show qos policer-hierarchy sap
Description
This command displays information about the policer hierarchy per SAP.
Parameters
- sap-id
-
Displays information about the specified SAP.
- ingress
-
Displays ingress SAP information.
- egress
-
Displays egress SAP information.
- detail
-
Displays detailed information.
- root-detail
-
Displays detailed information about the arbiter root.
- thresholds
-
Displays the threshold, parenting, rate, and traffic information related to a policer.
- priority-info
-
Displays the threshold information related to the root arbiter.
- depth
-
Displays the bucket depth, parenting, rate, and traffic information related to a policer.
- port-id
-
Displays information about the specified port.
- name
-
Displays information about the name of the QoS arbiter.
- root
-
Displays information about the arbiter root.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
Output
The following output is an example of SAP policer hierarchy information.
Output Example*A:PE-1# show qos policer-hierarchy sap 1/1/3:1
===============================================================================
Policer Hierarchy - Sap 1/1/3:1
===============================================================================
Ingress Policer Control Policy : cfhp-1
Egress Policer Control Policy :
-------------------------------------------------------------------------------
root (Ing)
|
| slot(1)
| Profile-preferred:Disabled
|
|--(A) : a3 (Sap 1/1/3:1)
| |
| |--(P) : Policer 1->1/1/3:1->4
| | |
| | | [Level 2 Weight 25]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:15000
| |
| |--(P) : Policer 1->1/1/3:1->3
| | |
| | | [Level 2 Weight 25]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:15000
| |
| |--(P) : Policer 1->1/1/3:1->2
| | |
| | | [Level 2 Weight 50]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:30000
|
|--(P) : Policer 1->1/1/3:1->5
| |
| | [Level 5 Weight 1]
| | Assigned PIR:10000 Offered:0
| | Consumed:0
| |
| | Assigned FIR:10000
|
|--(P) : Policer 1->1/1/3:1->1
| |
| | [Level 1 Weight 1]
| | Assigned PIR:100000 Offered:0
| | Consumed:0
| |
| | Assigned FIR:100000
root (Egr)
|
No Active Members Found on slot 1
===============================================================================
*A:PE-1#
*A:PE-1# show qos policer-hierarchy sap 1/1/3:1 detail
===============================================================================
Policer Hierarchy - Sap 1/1/3:1
===============================================================================
Ingress Policer Control Policy : cfhp-1
Egress Policer Control Policy :
-------------------------------------------------------------------------------
Legend :
(*) real-time dynamic value
(w) Wire rates
-------------------------------------------------------------------------------
root (Ing)
|
| slot(1)
| Profile-preferred:Disabled
| MaxPIR:100000
| ConsumedByChildren:0
| OperPIR:100000 OperFIR:100000
|
| DepthPIR:0 bytes
| Priority 8
| Oper Thresh Unfair:17408 Oper Thresh Fair:25600
| Association count:0
| Priority 7
| Oper Thresh Unfair:17408 Oper Thresh Fair:25600
| Association count:0
| Priority 6
| Oper Thresh Unfair:17408 Oper Thresh Fair:25600
| Association count:0
| Priority 5
| Oper Thresh Unfair:17408 Oper Thresh Fair:25600
| Association count:1
| Priority 4
| Oper Thresh Unfair:9728 Oper Thresh Fair:17408
| Association count:0
| Priority 3
| Oper Thresh Unfair:9728 Oper Thresh Fair:17408
| Association count:3
| Priority 2
| Oper Thresh Unfair:0 Oper Thresh Fair:8192
| Association count:0
| Priority 1
| Oper Thresh Unfair:0 Oper Thresh Fair:8192
| Association count:1
|
|--(A) : a3 (Sap 1/1/3:1)
| | MaxPIR:60000
| | ConsumedByChildren:0
| | OperPIR:60000 OperFIR:60000
| |
| | [Level 3 Weight 1]
| | Assigned PIR:60000 Offered:0
| | Consumed:0
| |
| | Assigned FIR:60000
| |
| |--(P) : Policer 1->1/1/3:1->4
| | | MaxPIR:60000 MaxCIR:20000
| | | CBS:25600 MBS:77824
| | | HiPrio:0
| | | Depth:0
| | |
| | | OperPIR:60000 OperCIR:20000
| | | OperFIR:15000
| | | PacketByteOffset:0
| | | StatMode: offered-total-cir
| | |
| | | [Level 2 Weight 25]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:15000
| |
| |--(P) : Policer 1->1/1/3:1->3
| | | MaxPIR:60000 MaxCIR:20000
| | | CBS:25600 MBS:77824
| | | HiPrio:0
| | | Depth:0
| | |
| | | OperPIR:60000 OperCIR:20000
| | | OperFIR:15000
| | | PacketByteOffset:0
| | | StatMode: offered-total-cir
| | |
| | | [Level 2 Weight 25]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:15000
| |
| |--(P) : Policer 1->1/1/3:1->2
| | | MaxPIR:60000 MaxCIR:20000
| | | CBS:25600 MBS:77824
| | | HiPrio:0
| | | Depth:0
| | |
| | | OperPIR:60000 OperCIR:20000
| | | OperFIR:30000
| | | PacketByteOffset:0
| | | StatMode: offered-total-cir
| | |
| | | [Level 2 Weight 50]
| | | Assigned PIR:60000 Offered:0
| | | Consumed:0
| | |
| | | Assigned FIR:30000
|
|--(P) : Policer 1->1/1/3:1->5
| | MaxPIR:10000 MaxCIR:10000
| | CBS:12800 MBS:12800
| | HiPrio:0
| | Depth:0
| |
| | OperPIR:10000 OperCIR:10000
| | OperFIR:10000
| | PacketByteOffset:0
| | StatMode: offered-total-cir
| |
| | [Level 5 Weight 1]
| | Assigned PIR:10000 Offered:0
| | Consumed:0
| |
| | Assigned FIR:10000
|
|--(P) : Policer 1->1/1/3:1->1
| | MaxPIR:100000 MaxCIR:0
| | CBS:0 MBS:126976
| | HiPrio:0
| | Depth:0
| |
| | OperPIR:100000 OperCIR:0
| | OperFIR:100000
| | PacketByteOffset:0
| | StatMode: offered-total-cir
| |
| | [Level 1 Weight 1]
| | Assigned PIR:100000 Offered:0
| | Consumed:0
| |
| | Assigned FIR:100000
root (Egr)
|
No Active Members Found on slot 1
===============================================================================
*A:PE-1#
|
Label |
Description |
|---|---|
|
Policer Hierarchy - SAP |
Displays the SAP ID |
|
slot |
Displays the slot number |
|
(A) |
An arbiter, an object that is configured in the policy |
|
a3 |
Displays the name of the arbiter |
|
(P) |
Displays the policer name |
|
[Level X Weight XX] |
Displays the CIR level and weight configured in the policy |
|
Assigned PIR |
Displays the assigned PIR value |
|
Offered |
Displays the Offered PIR value |
|
Consumed |
Displays the amount of bandwidth consumed by the policer |
|
Assigned FIR |
Displays the assigned FIR based on weights of individual policers and the offered traffic |
sap
Syntax
sap sap-id [scheduler scheduler-name] [{ingress | egress}] [detail]
sap sap-id encap-group group-name [scheduler scheduler-name] [ member encap-id] [detail]
Context
[Tree] (show>qos>scheduler-hierarchy sap)
Full Context
show qos scheduler-hierarchy sap
Description
This command displays the scheduler hierarchy per SAP.
Parameters
- sap-id
-
Specifies the SAP assigned to the service.
- scheduler-name
-
The unique scheduler name created in the context of the scheduler policy
- ingress
-
The keyword to display ingress SAP scheduler stats.
- egress
-
The keyword to display egress SAP scheduler stats.
- group-name
-
Specifies the name of the encap-group and can be up to 32 ASCII characters.
- encap-id
-
Specifies the value of the single encap-id.
- detail
-
Displays detailed information.
Platforms
All
Output
The following output is an example of SAP scheduler hierarchy information, and Output fields: QoS scheduler hierarchy SAP describes the SAP scheduler hierarchy fields.
Output Example===============================================================================
*A:Dut-A>config>service# show qos scheduler-hierarchy sap lag-1:1 ingress detail
===============================================================================
Scheduler Hierarchy - Sap lag-1:1
===============================================================================
Ingress Scheduler Policy: sched1
-------------------------------------------------------------------------------
Legend :
(*) real-time dynamic value
(otw) on-the-wire rates
(lmotw) last-mile-on-the-wire rates
B Bytes
-------------------------------------------------------------------------------
Root (Ing)
|
| slot(1)
|
|--(S) : sch1
| | AdminPIR:max AdminCIR:0 kbps(sum)
| | Limit Unused Bandwidth: disabled
| |
| | [Within CIR Level 0 Weight 0]
| | Assigned:0 kbps Offered:0 kbps
| | Consumed:0 kbps
| |
| | [Above CIR Level 0 Weight 0]
| | Assigned:0 kbps Offered:0 kbps
| | Consumed:0 kbps
| |
| | TotalConsumed:0 kbps
| | OperPIR:max
| |
| | [As Parent]
| | Rate:max
| | ConsumedByChildren:0 kbps
| |
| |--(P) : 1->lag-1:1(1/1/c1/1)->2
| | | AdminPIR:max AdminCIR:0 kbps
| | | Parent Limit Unused Bandwidth: not-found
| | | CBS:0 B MBS:8589934592 B
| | | Depth:0 B
| | | Low Drop Tail:0 B
| | |
| | | [Within CIR Level 0 Weight 1]
| | | Assigned:0 kbps Offered:0 kbps
| | | Consumed:0 kbps
| | |
| | | [Above CIR Level 1 Weight 1]
| | | Assigned:max Offered:0 kbps
| | | Consumed:0 kbps
| | | TotalConsumed:0 kbps
| | | OperPIR:max OperCIR:0 kbps
| | |
| | | PktByteOffset:add 0*
| | | OnTheWireRates:false
| | | ATMOnTheWireRates:false
| | | LastMileOnTheWireRates:false
| |
| |--(S) : Tier0Ingress:1->lag-1:1->1
| | | AdminPIR:10000000 kbps AdminCIR:0 kbps
| | | AdminFIR:0 kbps
| | | Parent Limit Unused Bandwidth: not-found
| | |
| | | [Within CIR Level 0 Weight 1]
| | | Assigned:0 kbps Offered:0 kbps
| | | Consumed:0 kbps
| | |
| | | [Above CIR Level 1 Weight 1]
| | | Assigned:10000000 kbps Offered:0 kbps
| | | Consumed:0 kbps
| | |
| | | TotalConsumed:0 kbps
| | | OperPIR:10000000 kbps
| | |
| | | [As Parent]
| | | OperPIR:10000000 kbps OperCIR:0 kbps
| | | OperFIR:0 kbps
| | | ConsumedByChildren:0 kbps
| | |
| | |--(Q) : 1->lag-1:1(1/1/c1/1)->1 1:1/1
| | | | AdminPIR:10000000 kbps AdminCIR:0 kbps
| | | | Parent Limit Unused Bandwidth: not-found
| | | | CBS:0 B
| | | | MBS:12582912 B
| | | | Depth:0 B
| | | | HighPlus Drop Tail:12582912 B
| | | | High Drop Tail:12582912 B
| | | | Low Drop Tail:11272192 B
| | | | Exceed Drop Tail:9961472 B
| | | |
| | | | [CIR Weight 1]
| | | | Assigned:0 kbps Offered:0 kbps
| | | | Consumed:0 kbps
| | | |
| | | | [PIR Weight 1]
| | | | Assigned:10000000 kbps Offered:0 kbps
| | | | Consumed:0 kbps
| | | | OperPIR:max OperCIR:0 kbps
| | | |
| | | | OperFIR:0 kbps
| | | |
| | | | PktByteOffset:add 0*
| | | | OnTheWireRates:false
| | | | ATMOnTheWireRates:false
| | | | LastMileOnTheWireRates:false
===============================================================================
*A:PE# show qos scheduler-hierarchy sap 1/1/1:1 egress detail
===============================================================================
Scheduler Hierarchy - Sap 1/1/1:1
===============================================================================
Egress Scheduler Policy : sp1
-------------------------------------------------------------------------------
Legend :
(*) real-time dynamic value
(w) Wire rates
B Bytes
-------------------------------------------------------------------------------
Root (Egr)
| slot(1)
|--(S) : s1
| | AdminPIR:200000 AdminCIR:10000(sum)
| | Limit Unused Bandwidth: disabled
| |
| |
| | [Within CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| | [Above CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| |
| | TotalConsumed:0
| | OperPIR:200000
| |
| | [As Parent]
| | Rate:200000
| | ConsumedByChildren:0
| |
| |
| |--(Q) : 1->1/1/1:1->1
| | | AdminPIR:10000 AdminCIR:10000
| | | Parent Limit Unused Bandwidth: not-found
| | | CBS:15360 B
| | | MBS:66048 B
| | | Depth:0 B
| | | HighPlus Drop Tail:66048 B
| | | High Drop Tail:66048 B
| | | Low Drop Tail:58368 B
| | | Exceed Drop Tail:52224 B
| | |
| | | [Within CIR Level 6 Weight 1]
| | | Assigned:10000 Offered:0
| | | Consumed:0
| | |
| | | [Above CIR Level 6 Weight 1]
| | | Assigned:10000 Offered:0
| | | Consumed:0
| | |
| | | TotalConsumed:0
| | | OperPIR:10000 OperCIR:10000
| | |
| | | PktByteOffset:add 0*
| | | OnTheWireRates:false
| | | ATMOnTheWireRates:false
| | | LastMileOnTheWireRates:false
| |
|
===============================================================================
|
Label |
Description |
|---|---|
|
Admin CIR/PIR |
Specifies the configured value of CIR/PIR. |
|
Assigned CIR/PIR |
Specifies the PIR/CIR rate given to a member by that parent level. |
|
Offered CIR/PIR |
Specifies the offered load on that member. |
|
Consumed CIR/PIR |
Specifies the amount of scheduler bandwidth used by this member. |
|
S |
Displays the scheduler name and information. |
|
Q |
Displays the queue ID and information. |
|
P |
Displays the policer ID and information. |
sap
Syntax
sap sap-id [scheduler scheduler-name] [{ingress | egress}]
sap sap-id encap-group group-name [scheduler scheduler-name] [ member encap-id]
Context
[Tree] (show>qos>scheduler-stats sap)
Full Context
show qos scheduler-stats sap
Description
This command displays information about the scheduler stats per SAP.
Parameters
- sap-id
-
Displays information about the SAP and encapsulation value used to identify the SAP.
- scheduler-name
-
Displays information about the specified schedule.
- ingress
-
Display only the policy displayed on the ingress SAP.
- egress
-
Display only the policy displayed on the egress SAP.
- group-name
-
Specifies the name of the encap-group and can be up to 32 ASCII characters.
- encap-id
-
Specifies the value of the single encap-id.
Platforms
All
Output
The following output is an example of scheduler-stats SAP information, and Output fields: QoS scheduler stats SAP describes the scheduler-stats SAP fields.
Output ExampleA:ALA-12# show qos scheduler-stats sap 1/1/4.1:0
==============================================================================
Scheduler Stats
==============================================================================
Scheduler Forwarded Packets Forwarded Octets
-----------------------------------------------------------------------------
Ingress Schedulers
All_traffic 0 0
NetworkControl 0 0
Egress Schedulers
All_traffic 0 0
Internet_be 0 0
Internet_priority 0 0
Internet_voice 0 0
NetworkControl 0 0
NonVoice 0 0
VPN_be 0 0
VPN_nc 0 0
VPN_priority 0 0
VPN_reserved 0 0
VPN_video 0 0
VPN_voice 0 0
Voice 0 0
=============================================================================
A:ALA-12#
A:ALA-12# show qos scheduler-stats sap 1/1/5:0 scheduler 1
==============================================================================
Scheduler Stats
==============================================================================
Scheduler Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
Ingress Schedulers
No Matching Entries.
Egress Schedulers
No Matching Entries.
==============================================================================
A:ALA-12#
A:ALA-12# show qos scheduler-stats sap 1/1/4.1:0 scheduler All_traffic
=============================================================================
Scheduler Stats
==============================================================================
Scheduler Forwarded Packets Forwarded Octets
------------------------------------------------------------------------------
Ingress Schedulers
All_traffic 0 0
Egress Schedulers
All_traffic 0 0
==============================================================================
A:ALA-12#
|
Label |
Description |
|---|---|
|
Scheduler |
Displays the scheduler policy name. |
|
Forwarded Packets |
Displays the number of packets forwarded. |
|
Forwarded Octet |
Displays the number of octets forwarded. |
|
Ingress Schedulers |
Displays the egress scheduler name(s). |
|
Egress Schedulers |
Displays the ingress scheduler name(s). |
sap
Syntax
sap sap-id [egress] [ detail]
sap sap-id encap-group group-name [member encap-id] [detail]
Context
[Tree] (show>qos>agg-rate sap)
Full Context
show qos agg-rate sap
Description
This command displays the H-QoS aggregate rate limit per SAP or encap group.
Parameters
- sap sap-id
-
The port number and encapsulation value used to identify the SAP.
- egress
-
Displays egress SAP customer scheduler stats.
- group-name
-
Specifies the name of the encap-group and can be up to 32 ASCII characters.
- encap-id
-
Specifies the value of the single encap-id.
- detail
-
Displays detailed information.
Platforms
All
Output
The following output is an example of H-QoS aggregate rate limit per SAP output, and Output fields: H-QoS aggregate rate limit per SAP describes the H-QoS aggregate rate limit per SAP fields.
Output Example*A:PE# show qos agg-rate sap 1/1/1:1 egress
===============================================================================
Aggregate Rate Information - Sap 1/1/1:1
===============================================================================
-------------------------------------------------------------------------------
Root (Egr)
| slot(1)
| AdminRate : 10000
| OperRate : 0
| Limit Unused Bandwidth : disabled
| OnTheWireRates : false
| LastMileOnTheWireRates : false
|
===============================================================================
*A:PE#
|
Label |
Description |
|---|---|
|
AdminRate |
Displays the configured aggregate rate in the subscriber profile. |
|
OperRate |
Displays the actual downstream rate. |
|
Limit Unused Bandwidth |
Indicates whether the limit-unused-bandwidth command is enabled to protect against exceeding the aggregated bandwidth |
|
OnTheWireRates |
Indicates whether the displayed rates are on-the-wire rates. |
|
LastMileOnTheWireRates |
Indicates whether the displayed rates are on-the-wire rates for the last mile only. |
sap
Syntax
sap sap-id [scheduler scheduler-name] [{ingress | egress}]
Context
[Tree] (clear>qos>scheduler-stats sap)
Full Context
clear qos scheduler-stats sap
Description
This command clears scheduler statistics.
Parameters
- sap-id
-
Specifies the SAP assigned to the service.
- scheduler-name
-
Displays the scheduler name.
- ingress
-
Display only the policy displayed on the ingress SAP.
- egress
-
Display only the policy displayed on the egress SAP.
Platforms
All
sap
Syntax
sap sap-id start mode [mac-swap] [mac ieee-address] [all]
sap sap-id stop
Context
[Tree] (tools>perform>service>id>loopback>eth sap)
Full Context
tools perform service id loopback eth sap
Description
This command places and removes the specific SAP in loopback mode for reflecting Ethernet traffic back in the direction of the received stream. This is only applicable to Ethernet-based SAPs.
Parameters
- sap-id
-
Specifies the SAP ID.
- start
-
Keyword that places the sap in loopback mode.
- mode
-
Keywords that specify the location on the loopback in relation to the SAP.
- stop
-
Removes the SAP from loopback mode.
- mac-swap
-
Enable source address and destination address swapping for the reflected packets when the arriving packet is unicast. Any broadcast and multicast packets arriving on a looped point will be dropped.
- mac ieee-address
-
Optionally configures the source MAC address used in the reflected packet when the arriving packet is a broadcast or multicast. This does not apply to arriving unicast packets.
6-byte unicast mac-address in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
- all
-
Configured ieee-address is used as the source address for all reflected packets regardless of the arriving destination.
Platforms
All
sap
Syntax
sap sap-id [arbiter {root | name}] [ingress | egress] [interval seconds] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>qos>arbiter-stats sap)
Full Context
monitor qos arbiter-stats sap
Description
This command monitors arbiter statistics for a SAP.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- name
-
Specifies the name of the policer control policy arbiter, up to 32 characters. This parameter is mandatory if the SAP resides on a LAG in adapt-qoslink or port-fair mode.
- root
-
Specifies the arbiter to which this queue would be feeding.
- ingress
-
Displays scheduler-name statistics applied on the ingress SAP.
- egress
-
Displays scheduler-name statistics applied on the egress SAP.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures the number of times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
sap
Syntax
sap sap-id [scheduler scheduler-name] [ ingress | egress] [interval seconds] [ repeat repeat] [absolute | rate]
Context
[Tree] (monitor>qos>scheduler-stats sap)
Full Context
monitor qos scheduler-stats sap
Description
Use this command to monitor scheduler statistics for a SAP at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified SAP. The subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- scheduler-name
-
Specifies an existing scheduler-name, up to 32 characters. Scheduler names are configured in the config>qos>scheduler-policy>tier level context. This parameter is mandatory if the SAP resides on a LAG in adapt-qoslink or port-fair mode.
- ingress
-
Displays scheduler-name statistics applied on the ingress SAP.
- egress
-
Displays scheduler-name statistics applied on the egress SAP.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
sap
Syntax
sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
sap sap-id encap-group group-name [member encap-id] [interval seconds] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>service>id sap)
Full Context
monitor service id sap
Description
This command monitors statistics for a SAP associated with this service.
This command displays statistics for a specific SAP, identified by the port-id and encapsulation value, at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical information listed for each interval is displayed as a delta to the previous display. When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- port-id
-
Specifies the physical port ID in the slot/mda/port, esat-id/slot/ port or pxc-id.sub-port format.
If the card in the slot has XMAs/MDAs installed, the port-id must be in the slot_number/MDA_number/port_number format. For example, 6/2/3 specifies port 3 on XMA/MDA 2 in slot 6.
The port-id must reference a valid port type. When the port-id parameter represents SONET/SDH and TDM channels, the port ID must include the channel ID. A period ".” separates the physical port from the channel-id. The port must be configured as an access port. Channels are supported on the 7750 SR.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
- bundle-id
-
Specifies the multilink bundle to be associated with this IP interface. The bundle keyword must be entered at the beginning of the parameter. This parameter applies to the 7750 SR.
The command syntax must be configured as follows:
bundle-id: bundle-type-slot-id/mda-slot.bundle-num
bundle-id value range: 1 to 128
For example:
*A:ALA-12>config# port bundle-ppp-5/1.1 *A:ALA-12>config>port# multilink-bundle
- bgprp-id
-
Specifies the bundle protection group ID to be associated with this IP interface. The bpgrp keyword must be entered at the beginning of the parameter. This parameter applies to the 7750 SR.
The command syntax must be configured as follows:
bpgrp-id:
bpgrp-type-bpgrp-num
type:
ima
bpgrp-num value range:
1 to 1280
Example:
*A:ALA-12>config# port bpgrp-ima-1 *A:ALA-12>config>service>vpls$ sap bpgrp-ima-1
- qtag1, qtag2
-
Specifies the encapsulation value used to identify the SAP on the port or sub-port. If this parameter is not specifically defined, the default value is 0.
- group-name
-
Specifies the name of the encap group, up to 32 characters.
- encap-id
-
Specifies the value of the encapsulation ID to be displayed.
- seconds
-
Configures the interval for each display, in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays absolute rate-per-second value for each statistic.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
Output
The following output is an example of SAP information.
Output Example*A:cses-A13# monitor service id 88 sap 1/1/2:0
===============================================================================
Monitor statistics for Service 88 SAP 1/1/2:0
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time : N/A
Packets Octets
Forwarding Engine Stats
Dropped : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
sap
Syntax
sap sap-id [arbiter {name | root}] [ingress | egress]
Context
[Tree] (clear>qos>arbiter-stats sap)
Full Context
clear qos arbiter-stats sap
Description
This command clears the arbiter statistics per SAP.
Parameters
- sap-id
-
Specifies the port ID portion of the SAP definition.
- name
-
Specifies the arbiter name, up to 32 characters.
- root
-
Specifies the arbiter root, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
sap
Syntax
sap sap-id [arbiter name | root] [ingress | egress]
Context
[Tree] (show>qos>arbiter-stats sap)
Full Context
show qos arbiter-stats sap
Description
This command displays the arbiter statistics per SAP.
Parameters
- sap-id
-
Specifies the SAP ID.
- name
-
Specifies the arbiter name, up to 32 characters.
- root
-
Specifies the arbiter root, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
sap
Syntax
sap sap-id [ingress | egress] [detail] [port port-id]
Context
[Tree] (show>qos>policer sap)
Full Context
show qos policer sap
Description
This command displays the policer per SAP.
Parameters
- sap-id
-
Specifies the SAP ID.
- port-id
-
Specifies the port ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
sap-egress
sap-egress
Syntax
sap-egress [policy-id] [association | match-criteria | detail]
sap-egress summary
Context
[Tree] (show>qos sap-egress)
Full Context
show qos sap-egress
Description
This command displays SAP egress QoS policy information.
Parameters
- policy-id
-
Displays information about the specific policy ID.
- detail
-
Displays detailed policy information including policy associations.
- summary
-
Displays SAP egress policy summary.
Platforms
All
Output
The following output is an example of QoS SAP egress information, and Output fields: QoS SAP egress describes the output fields.
Output Example*A:PE# show qos sap-egress
===============================================================================
Sap Egress Policies
===============================================================================
Policy-Id Scope Name Description
-------------------------------------------------------------------------------
1 Template default Default SAP egress QoS policy.
-------------------------------------------------------------------------------
Number of Policies : 1
-------------------------------------------------------------------------------
===============================================================================
*A:PE# show qos sap-egress 1 detail
===============================================================================
QoS Sap Egress
===============================================================================
-------------------------------------------------------------------------------
Sap Egress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Ethernet-ctag : False Parent-loc : default
Name : default
Description : Default SAP egress QoS policy.
Policy Active : True Plcrs HQoS Managed : False
Post Plcr Mapping Policy: (Not Specified)
HS Attachment Policy : default
-------------------------------------------------------------------------------
Dynamic Configuration Information
-------------------------------------------------------------------------------
PccRule Insert Point : n/a DynPlcr Insert Point : n/a
CBS : Def MBS : Def
Parent : (Not Specified)
Level : 1 Weight : 1
Packet Byte Offset : 0
Stat Mode : minimal
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1 Queue-Type : auto-expedite
Admin PIR : max Admin CIR : 0
PIR Percent : def CIR Percent : def
PIR Rule : closest CIR Rule : closest
CBS : Def MBS : Def
Avg Frame Overhead : 0.00 Packet Byte Offset : add 0
Adv Config Policy : (Not Specified)
Parent : (Not Specified)
PIR Level/Weight : 1/1 CIR Level/Weight : 0/1
Burst Limit : default
Wred Queue Mode : none Wred Queue SlopeUsage: not-applicable
Slope Policy : default
High-Plus Drop Tail : def High Drop Tail : def
Low Drop Tail : def Exceed Drop Tail : def
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
HS Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1
Admin PIR : max
PIR Percent : def
PIR Rule : closest
MBS : Def
Packet Byte Offset : add 0
Burst Limit : default
HS Class Weight : 1 HS Wrr Weight : 1
HS Wred-Q Slope Plcy : _tmnx_hs_default
HS Alt Class Pool : False
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
HS Wrr Group Information
-------------------------------------------------------------------------------
HS Wrr Group Id : 1 Class Weight : 1
Rate : max Percent Rate : 100.00
PIR Adaptation Rule: closest
HS Wrr Group Id : 2 Class Weight : 1
Rate : max Percent Rate : 100.00
PIR Adaptation Rule: closest
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Forwarding Class (FC) Classification and Remarking Information
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
FC Queue Queue-Group InstanceId SapBReDir Plcr
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Service-Name : 1
Service-Id : 1 (VPLS) Customer-Id : 1
- SAP : 2/1/1
- SAP : 5/1/1
-------------------------------------------------------------------------------
Mirror SAPs
-------------------------------------------------------------------------------
No Mirror SAPs Found.
-------------------------------------------------------------------------------
DSCP Cntr Id Profile fc
-------------------------------------------------------------------------------
No DSCP-Map Entries Found.
-------------------------------------------------------------------------------
Prec Value Cntr Id Profile fc
-------------------------------------------------------------------------------
No Prec-Map Entries Found.
-------------------------------------------------------------------------------
Dot1p fc Profile
-------------------------------------------------------------------------------
No Dot1p-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
No Matching Criteria.
*A:PE#
|
Label |
Description |
|---|---|
|
Policy-Id |
The ID that uniquely identifies the policy. |
|
Scope |
Exclusive — Specifies that this policy can only be applied to a single SAP. Template — Specifies that this policy can be applied to multiple SAPs on the router. |
|
Description |
A text string that helps identify the policy context in the configuration file. |
|
Queue |
|
|
CIR Admin |
Specifies the administrative Committed Information Rate (CIR) parameters for the queue. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. |
|
CIR Oper |
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules. |
|
CIR Rule |
min — The operational CIR for the queue will be equal to or greater than the administrative rate specified using the rate command except where the derived operational CIR is greater than the operational PIR. If the derived operational CIR is greater than the derived operational PIR, the operational CIR will be made equal to the operational PIR. max — The operational CIR for the queue will be equal to or less than the administrative rate specified using the rate command. closest — The operational CIR for the queue will be the rate closest to the rate specified using the rate command without exceeding the operational CIR. |
|
PIR Admin |
Specifies the administrative Peak Information Rate (PIR) parameters for the queue. The PIR defines the maximum rate that the queue can transmit packets through the switch fabric (for SAP ingress queues) or out an egress interface (for SAP egress queues). |
|
PIR Oper |
The administrative PIR specified by the user. |
|
PIR Rule |
min — The operational PIR for the queue will be equal to or greater than the administrative rate specified using the rate command. max — The operational PIR for the queue will be equal to or less than the administrative rate specified using the rate command. closest — The operational PIR for the queue will be the rate closest to the rate specified using the rate command. |
|
CBS |
def — Specifies that the CBS value reserved for the queue. value — Specifies the value to override the default reserved buffers for the queue. |
|
MBS |
def — Specifies that the MBS value is set by the def-mbs function. value — Specifies the value to override the default maximum size for the queue. |
|
HiPrio |
Specifies the percentage of buffer space for the queue, used exclusively by high-priority packets. |
|
PIR Lvl/Wt |
Specifies the priority level of the scheduler when compared to other child schedulers and queues vying for bandwidth on the parent schedulers during the above-CIR distribution phase of bandwidth allocation. Weight defines the relative weight of this scheduler in comparison to other child schedulers and queues at the same level. |
|
CIR Lvl/Wt |
Specifies the level of hierarchy when compared to other schedulers and queues when vying for bandwidth on the parent scheduler. Weight defines the relative weight of this queue in comparison to other child schedulers and queues while vying for bandwidth on the parent scheduler. |
|
Parent |
Specifies the parent scheduler that governs the available bandwidth given the queue aside from the queue’s PIR setting. |
|
FC Name |
Specifies the forwarding class queue mapping or dot1p marking is to be edited. |
|
Queue-id |
Specifies the queue-id that uniquely identifies the queue within the policy. |
|
Explicit/Default |
Explicit — Specifies the egress IEEE 802.1p (dot1p) bits marking for fc-name. Default — Specifies that the default dot1p value (0) is used. |
|
Service Association |
|
|
Service-Id |
The unique service ID number that identifies the service in the service domain. |
|
Customer-Id |
Specifies the customer ID that identifies the customer to the service. |
|
SAP |
Specifies the Service Access Point (SAP) within the service where the policy is applied. |
|
Mirror SAPs |
|
|
Mirror Dest |
Specifies the mirror service ID that identifies the service in the service domain. |
|
SAP |
Specifies the Service Access Point (SAP) within the service where the SAP egress policy is applied. |
sap-ingress
sap-ingress
Syntax
sap-ingress [policy-id] [association | match-criteria | detail]
sap-ingress summary
Context
[Tree] (show>qos sap-ingress)
Full Context
show qos sap-ingress
Description
This command displays SAP ingress QoS policy information.
Parameters
- policy-id
-
Displays information about the specific policy ID.
- detail
-
Displays detailed policy information including policy associations.
- summary
-
Displays SAP ingress policy summary.
Platforms
All
Output
The following output is an example of QoS SAP ingress information, and Output fields: QoS SAP ingress describes the output fields.
Output Example*A:PE# show qos sap-ingress
===============================================================================
Sap Ingress Policies
===============================================================================
Policy-Id Scope Name Description
-------------------------------------------------------------------------------
1 Template default Default SAP ingress QoS policy.
-------------------------------------------------------------------------------
Number of Policies : 1
-------------------------------------------------------------------------------
===============================================================================
*A:PE#
*A:PE# show qos sap-ingress 1 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
Policy-id : 1 Scope : Template
Default FC : be Priority : Low
Criteria-type : None
Name : default
Description : Default SAP ingress QoS policy.
Policy Active : True
-------------------------------------------------------------------------------
Dynamic Configuration Information
-------------------------------------------------------------------------------
PccRule Insert Point : n/a DynPlcr Insert Point : n/a
CBS : Def MBS : Def
Parent : (Not Specified)
Level : 1 Weight : 1
Packet Byte Offset : 0
Stat Mode : minimal
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Q Mode CIR Admin PIR Admin CBS PIR Lvl/Wt Parent
CIR Rule PIR Rule MBS CIR Lvl/Wt BurstLimit(B)
CIR Prcnt PIR Prcnt Low Drop Tail
Pkt Bt Ofst Adv Config Policy Name
FIR Admin FIR Rule Cir-non-profiling
FIR Prcnt
-------------------------------------------------------------------------------
1 Prio 0 max def 1/1 None
closest closest def 0/1 default
def def def
(not-assigned) add 0 (not-assigned)
0 closest disabled
def
11 Prio 0 max def 1/1 None
closest closest def 0/1 default
def def def
(not-assigned) add 0 (not-assigned)
0 closest disabled
def
===============================================================================
Sap-Ingress FC (Detail)
===============================================================================
No FC-Map Entries Found.
===============================================================================
-------------------------------------------------------------------------------
FC DE-1-out-profile Profile In-Remark Out-Remark Egr-Override-FC
-------------------------------------------------------------------------------
No SubFC Map Entries Found.
-------------------------------------------------------------------------------
Dot1p FC Priority
-------------------------------------------------------------------------------
No Dot1p-Map Entries Found.
-------------------------------------------------------------------------------
DSCP FC Priority
-------------------------------------------------------------------------------
No DSCP-Map Entries Found.
-------------------------------------------------------------------------------
Prec Value FC Priority
-------------------------------------------------------------------------------
No Prec-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
No Matching Criteria.
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Service-Name : 1
Service-Id : 1 (VPLS) Customer-Id : 1
- SAP : 2/1/1
- SAP : 5/1/1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
LSP EXP FC Priority
-------------------------------------------------------------------------------
No LspExp-Map Entries Found.
===============================================================================
*A:PE#
|
Label |
Description |
|---|---|
|
Policy-Id |
The ID that uniquely identifies the policy. |
|
Scope |
Exclusive — Specifies that this policy can only be applied to a single SAP. Template - Specifies that this policy can be applied to multiple SAPs on the router. |
|
Description |
A text string that helps identify the policy context in the configuration file. |
|
Default FC |
Specifies the default forwarding class for the policy. |
|
Priority |
Specifies the enqueuing priority when a packet is marked with a dot1p-value specified. |
|
Criteria-type |
IP — Specifies that an IP criteria-based SAP ingress policy is used to select the appropriate ingress queue and corresponding forwarding class for matched traffic. MAC — Specifies that a MAC criteria-based SAP is used to select the appropriate ingress queue and corresponding forwarding class for matched traffic. |
|
Mode |
Specifies the configured mode of the meter (trTcm or srTcm). |
|
CIR Admin |
Specifies the administrative Committed Information Rate (CIR) parameters for the queue. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. |
|
CIR Oper |
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules. |
|
CIR Rule |
min — The operational CIR for the queue will be equal to or greater than the administrative rate specified using the rate command. max — The operational CIR for the queue will be equal to or less than the administrative rate specified using the rate command. closest —The operational CIR for the queue will be the rate closest to the rate specified using the rate command without exceeding the operational CIR. |
|
PIR Admin |
Specifies the administrative Peak Information Rate (PIR) parameters for the queue. The PIR defines the maximum rate that the queue can transmit packets through the switch fabric (for SAP ingress queues) or out an egress interface (for SAP egress queues). |
|
PIR Oper |
The administrative PIR specified by the user. |
|
PIR Rule |
min — The operational PIR for the queue will be equal to or greater than the administrative rate specified using the rate command. max — The operational PIR for the queue will be equal to or less than the administrative rate specified using the rate command. closest — The operational PIR for the queue will be the rate closest to the rate specified using the rate command. |
|
CBS |
def — Specifies the default CBS value for the queue. value — Specifies the value to override the default reserved buffers for the queue. |
|
MBS |
def — Specifies the default MBS value. value — Specifies the value to override the default MBS for the queue. |
|
HiPrio |
Specifies the percentage of buffer space for the queue, used exclusively by high-priority packets. |
|
PIR Lvl/Wt |
Specifies the priority level of the scheduler when compared to other child schedulers and queue vying for bandwidth on the parent schedulers during the above-CIR distribution phase of bandwidth allocation. Weight defines the relative weight of this scheduler in comparison to other child schedulers and queue at the same level. |
|
CIR Lvl/Wt |
Specifies the level of hierarchy when compared to other schedulers and queue when vying for bandwidth on the parent scheduler. Weight defines the relative weight of this queue in comparison to other child schedulers and queue while vying for bandwidth on the parent scheduler. |
|
Parent |
Specifies the parent scheduler that governs the available bandwidth given the queue, aside from the queue’s PIR setting. |
|
Dot1p |
Specifies the forwarding class or enqueuing priority when a packet is marked with a dot1p-value specified. |
|
FC |
Specifies the forwarding class overrides. |
|
Priority |
The optional priority setting overrides the default enqueuing priority for the packets received on an ingress SAP that uses the policy that matches this rule. High — Specifies that the high enqueuing parameter for a packet increases the likelihood of enqueuing the packet when the ingress queue is congested. Low —Specifies that the low enqueuing parameter for a packet decreases the likelihood of enqueuing the packet when the ingress queue is congested. |
|
DSCP |
Specifies the forwarding class or enqueuing priority when a packet is marked with the DiffServ Code Point (DSCP) value. |
|
FC |
Specifies one of the predefined forwarding classes in the system. When a packet matches the rule, the forwarding class is only overridden when the fc fc-name parameter is defined on the rule. |
|
Priority |
This parameter specifies the default enqueuing priority overrides for all packets received on an ingress SAP using this policy that matches this rule. High — Specifies that the high enqueuing parameter for a packet increases the likelihood of enqueuing the packet when the ingress queue is congested. Low — Specifies that the low enqueuing parameter for a packet decreases the likelihood of enqueuing the packet when the ingress queue is congested. |
|
Prec |
Specifies the forwarding class or enqueuing priority when a packet is marked with an IP precedence value ( ip-prec-value). |
|
UCastQ |
Specifies the default unicast forwarding type queue mapping. |
|
MCastQ |
Specifies the overrides for the default multicast forwarding type queue mapping. |
|
BCastQ |
Specifies the default broadcast forwarding type queue mapping. |
|
UnknownQ |
Specifies the default unknown unicast forwarding type queue mapping. |
|
Match Criteria |
Specifies an IP or MAC criteria entry for the policy. |
|
Entry |
|
|
Source IP |
Specifies a source IP address range used for an ingress SAP QoS policy match. |
|
Source Port |
Specifies a source TCP or UDP port number or port range used for an ingress SAP QoS policy match. |
|
Protocol |
Specifies the IP protocol number to be used for an ingress SAP QoS policy match. |
|
DSCP |
Specifies a DiffServ Code Point (DSCP) name used for an ingress SAP QoS policy match. |
|
Fragment |
True — Configures a match on all fragmented IP packets. False — Configures a match on all non-fragmented IP packets. |
|
FC |
Specifies the entry’s forwarding class. |
|
Priority |
Specifies the default enqueuing priority overrides for all packets received on an ingress SAP using this policy. |
|
Src MAC |
Specifies a source MAC address or range to be used as a Service Ingress QoS policy match. |
|
Dst MAC |
Specifies a destination MAC address or range to be used as a Service Ingress QoS policy match. |
|
Dot1p |
Specifies a IEEE 802.1p value to be used as the match. |
|
Snap-pid |
Specifies an IEEE 802.3 LLC SNAP Ethernet Frame PID value to be used as a Service Ingress QoS policy match. |
|
Ethernet-type |
Specifies an Ethernet type II Ethertype value to be used as a Service Ingress QoS policy match. |
|
ESnap-oui-zero |
Specifies an IEEE 802.3 LLC SNAP Ethernet Frame OUI zero or non-zero value to be used as a Service Ingress QoS policy match. |
|
DSAP |
Specifies an Ethernet 802.2 LLC DSAP value or range for an ingress SAP QoS policy match. |
|
SSAP |
Specifies an Ethernet 802.2 LLC DSAP value or range for an ingress SAP QoS policy match. |
|
FC |
Specifies the entry’s forwarding class. |
|
Priority |
Specifies the default enqueuing priority overrides for all packets received on an ingress SAP using this policy. |
|
Service Association |
|
|
Service-Id |
The unique service ID number that identifies the service in the service domain. |
|
Customer-Id |
Specifies the customer ID that identifies the customer to the service. |
|
SAP |
Specifies the Service Access Point (SAP) within the service where the SAP ingress policy is applied. |
sap-template
sap-template
Syntax
sap-template template-name idle-saps
Context
[Tree] (clear>subscr-mgmt sap-template)
Full Context
clear subscriber-mgmt sap-template
Description
This command deletes any SAPs created with the specified SAP template that are no longer in use by any subscriber sessions.
Parameters
- template-name
-
Specifies the name of a template, up to 256 characters, configured under configure subscriber-mgmt sap-template.
- idle-saps
-
Keyword that specifies to delete any idle SAPs associated with this template.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
sap-using
sap-using
Syntax
sap-using [ingress | egress]
Context
[Tree] (show>service sap-using)
Full Context
show service sap-using
Description
Displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters
- ingress
-
Specifies matching an ingress policy.
- egress
-
Specifies matching an egress policy.
- qos-policy qos-policy-id
-
The ingress or egress QoS Policy ID for which to display matching SAPs.
- filter filter-id
-
The ingress or egress Filter Policy ID for which to display matching SAPs.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- interface
-
Specifies matching SAPs with the specified IP interface.
- ip-addr
-
The IP address of the interface for which to display matching SAPs.
- ip-int-name
-
The IP interface name for which to display matching SAPs.
Platforms
All
Output
The following output is an example of service SAP information, and Output fields: SAP describes show service SAP output fields.
Output ExampleA:ALA-48>config>service>ies# show service sap-using sap 1/3/2:244/1
===============================================================================
Service Access Points Using Port 1/3/2:15990785
===============================================================================
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr
-------------------------------------------------------------------------------
1/3/2:244/1 89 1 none 1 none none Up Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
A:ALA-48>config>service>ies#
|
Label |
Description |
|---|---|
|
Port ID |
The ID of the access port where the SAP is defined |
|
Svc ID |
The service identifier |
|
SapMTU |
The SAP MTU value |
|
I.QoS |
The SAP ingress QoS policy number specified on the ingress SAP |
|
I.MAC/IP |
The MAC or IP filter policy ID applied to the ingress SAP |
|
E.QoS |
The SAP egress QoS policy number specified on the egress SAP |
|
E.Mac/IP |
The MAC or IP filter policy ID applied to the egress SAP |
|
A.Pol |
The accounting policy ID assigned to the SAP |
|
Adm |
The desired state of the SAP |
|
Opr |
The actual state of the SAP |
sap-using
Syntax
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof] [description]
sap-using {ingress | egress} atm-td-profile td-profile-id
sap-using {ingress | egress} filter any-filter-id
sap-using {ingress | egress} qos-policy qos-policy-id [msap]
sap-using etree
sap-using eth-cfm squelch-ingress-levels [all | ctag-space] [sap sap-id]
Context
[Tree] (show>service sap-using)
Full Context
show service sap-using
Description
This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters
- ingress
-
Specifies matching an ingress policy.
- egress
-
Specifies matching an egress policy.
- qos-policy-id
-
The ingress or egress QoS Policy ID for which to display matching SAPs.
- td-profile-id
-
Displays SAPs using this traffic description for the 7750 SR only.
- filter-id
-
The ingress or egress filter policy ID for which to display matching SAPs.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- dyn-script
-
Displays dynamic service SAPs information.
- msap
-
Displays MSAPs.
- vlan-translation
-
Displays VLAN translation information.
- anti-spoof
-
Displays anti-spoof information.
- squelch-ingress-level
-
Displays ETH-CFM squelching information of the type matching the service delimited configuration.
- all
-
Displays all squelch ingress levels information regardless of type.
- ctag-space
-
Displays all squelch-ingress-levels information that is skipping additional VLAN space.
Platforms
All
Output
The following output is an example of sap-using using information, and Output fields: service SAP describes the output fields.
Output Example*A:Dut-A# show service sap-using
========================================================================
Service Access Points
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
------------------------------------------------------------------------
1/1/1:1 1 1 none 1 none Up Up
2/1/2:10/11 1 1 none 1 none Up Up
2/1/2:10/12 1 1 none 1 none Up Up
2/1/2:20/11 1 1 none 1 none Up Up
2/1/2:20/12 1 1 none 1 none Up Up
2/1/4:cp.10 10 1 none 1 none Up Up
2/1/4:cp.20 20 1 none 1 none Up Up
------------------------------------------------------------------------
Number of SAPs : 7
------------------------------------------------------------------------
========================================================================
The following output is an example of SAP information for a specific SAP for the 7450 ESS or 7750 SR.
A:ALA-42#
*A:ALA-48# show service sap-using sap 1/1/21:0
===============================================================================
Service Access Points Using Port 1/1/21:0
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Anti Adm Opr
QoS Fltr QoS Fltr Spoof
-------------------------------------------------------------------------------
1/1/21:0 1 1 none 1 none none Up Down
-------------------------------------------------------------------------------
Number of SAPs : 1
===============================================================================
*A:ALA-48#
The following output is an example of SAP information for the egress traffic policy for the 7750 SR.
*A:ALA-12# show service sap-using egress atm-td-profile 2
==============================================================================
Service Access Point Using ATM Traffic Profile 2
===============================================================================
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr
-------------------------------------------------------------------------------
5/1/1:0/11 511111 2 none 2 none none Up Up
5/1/1:0/12 511112 2 none 2 none none Up Up
5/1/1:0/13 511113 2 none 2 none none Up Up
5/1/1:0/14 511114 2none 2 none none Up Up
5/1/1:0/15 511115 2 none 2 none none Up Up
5/1/1:0/16 511116 2 none 2 none none Up Up
5/1/1:0/17 511117 2 none 2 none none Up Up
5/1/1:0/18 511118 2 none 2 none none Up Up
5/1/1:0/19 511119 2 none 2 none none Up Up
5/1/1:0/20 511120 2 none 2 none none Up Up
5/1/1:0/21 511121 2 none 2 none none Up Up
5/1/1:0/22 511122 2 none 2 none none Up Up
5/1/1:0/23 511123 2 none 2 none none Up Up
5/1/1:0/24 511124 2 none 2 none none Up Up
5/1/1:0/25 511125 2 none 2 none none Up Up
...
===============================================================================
*A:ALA-12#
The following output is an example of squelch ingress levels information.
show service sap-using eth-cfm squelch-ingress-levels
===============================================================================
ETH-CFM Squelching
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
1/1/9:2.* 2 0 1 2
1/1/9:3.* 3 0 1 2 3 4
-------------------------------------------------------------------------------
Number of SAPs: 2
===============================================================================
show service sap-using eth-cfm squelch-ingress-levels ctag-space
===============================================================================
ETH-CFM Squelching CTAG Space
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
1/1/9:3.* 3 0 1 2 3
-------------------------------------------------------------------------------
Number of SAPs: 1
===============================================================================
show service sap-using eth-cfm squelch-ingress-levels all
===============================================================================
ETH-CFM Squelching
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
1/1/9:2.* 2 0 1 2
1/1/9:3.* 3 0 1 2 3 4
-------------------------------------------------------------------------------
Number of SAPs: 2
===============================================================================
===============================================================================
ETH-CFM Squelching CTAG Space
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
1/1/9:3.* 3 0 1 2 3
-------------------------------------------------------------------------------
Number of SAPs: 1
===============================================================================
show service sap-using eth-cfm squelch-ingress-levels sap 1/1/9:3.*
===============================================================================
ETH-CFM Squelching
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
1/1/9:3.* 3 0 1 2 3 4
-------------------------------------------------------------------------------
Number of SAPs: 1
===============================================================================
|
Label |
Description |
|---|---|
|
Port ID |
The ID of the access port where the SAP is defined |
|
Svc ID |
The service identifier |
|
Sap MTU |
The SAP MTU value |
|
Ing. QoS |
The SAP ingress QoS policy number specified on the ingress SAP |
|
Ing Fltr |
The MAC or IP filter policy ID applied to the ingress SAP |
|
Egr. QoS |
The SAP egress QoS policy number specified on the egress SAP for the 7450 ESS and 7750 SR only |
|
Egr. Fltr |
The MAC or IP filter policy ID applied to the egress SAP |
|
Adm |
The administrative state of the SAP |
|
Opr |
The operational state of the SAP |
|
SapId |
The ID that displays SAPs for the service |
|
Squelch Level |
The CFM levels configured for silent discard |
sap-using
Syntax
sap-using [ingress | egress] atm-td-profile td-profile-id
Context
[Tree] (show>service sap-using)
Full Context
show service sap-using
Description
Displays atm-td-profile SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters
- ingress
-
Specifies matching an ingress policy.
- egress
-
Specifies matching an egress policy.
- qos-policy qos-policy-id
-
The ingress or egress QoS Policy ID for which to display matching SAPs.
- filter filter-id
-
The ingress or egress Filter Policy ID for which to display matching SAPs.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- interface
-
Specifies matching SAPs with the specified IP interface.
- ip-addr
-
The IP address of the interface for which to display matching SAPs.
- ip-int-name
-
The IP interface name for which to display matching SAPs.
- td-profile-id
-
Profile ID that identifies a specific profile to display.
Platforms
All
Output
The following output is an example of service SAP information, and Output fields: SAP describes show service SAP output fields.
Output ExampleA:ALA-48>config>service>ies# show service sap-using sap 1/3/2:244/1
===============================================================================
Service Access Points Using Port 1/3/2:15990785
===============================================================================
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr
-------------------------------------------------------------------------------
1/3/2:244/1 89 1 none 1 none none Up Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
A:ALA-48>config>service>ies#
|
Label |
Description |
|---|---|
|
Port ID |
The ID of the access port where the SAP is defined. |
|
Svc ID |
The service identifier. |
|
SapMTU |
The SAP MTU value. |
|
I.QoS |
The SAP ingress QoS policy number specified on the ingress SAP. |
|
I.MAC/IP |
The MAC or IP filter policy ID applied to the ingress SAP. |
|
E.QoS |
The SAP egress QoS policy number specified on the egress SAP. |
|
E.Mac/IP |
The MAC or IP filter policy ID applied to the egress SAP. |
|
A.Pol |
The accounting policy ID assigned to the SAP. |
|
Adm |
The desired state of the SAP. |
|
Opr |
The actual state of the SAP. |
sap-using aarp
sap-using aarp
Syntax
sap-using aarp aarp-id
Context
[Tree] (show>service sap-using aarp)
Full Context
show service sap-using aarp
Description
This command displays SAP information for a specific AARP ID.
Parameters
- aarp-id
-
Specifies the AARP ID.
Platforms
All
sap-using app-profile
sap-using app-profile
Syntax
sap-using app-profile app-profile-name
Context
[Tree] (show>service sap-using app-profile)
Full Context
show service sap-using app-profile
Description
This command displays information about SAPs using the specified application profile.
Parameters
- app-profile-name
-
Specifies an existing application profile name created in the config>app-assure>group>policy context.
Platforms
All
Output
The following output is an example of the sap-using app profile command information.
Output Example*A:ALA-48# show service sap-using app-profile test
===============================================================================
Service Access Point Using Application Profile 'test'
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
-------------------------------------------------------------------------------
1/1/18:0 89 1 none 1 none Up Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48#
sap-using transit-policy
sap-using transit-policy
Syntax
sap-using transit-policy ip transit-ip-policy
sap-using transit-policy prefix transit-prefix-policy
Context
[Tree] (show>service sap-using transit-policy)
Full Context
show service sap-using transit-policy
Description
This command displays SAP information for a specific transit IP policy or transit prefix policy.
Parameters
- transit-ip-policy
-
Specifies the transit IP policy ID.
- transit-prefix-policy
-
Specifies a transit prefix policy ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
saps
saps
Syntax
saps [control-session acct-session-id] [ port port-id] [dynsvc-policy policy-name] [ summary] [sap sap-id] [svc-id service-id]
Context
[Tree] (show>service>dynsvc saps)
Full Context
show service dynamic-services saps
Description
This command displays Dynamic Services SAPs (instances) details.
This command is not available in the MD-CLI.
Parameters
- summary
-
Displays a summary view only.
- acct-session-id
-
Specifies control session accounting session id.
- port-id
-
Specifies Ethernet port.
- policy-name
-
Specifies dynamic services policy.
- sap sap-id
-
Specifies dynamic services SAP id.
- service-id
-
The service ID of the dynamic service.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of dynamic service SAP information.
Output Example# show service dynamic-services saps
===============================================================================
Dynamic Services SAP's
===============================================================================
SAP : 1/1/1:1.901
-------------------------------------------------------------------------------
Acct session-ID : 242FFF000001AE512CE4B6
Acct session-ID control : 242FFF000001AB512CE4B6
Service : [100000]
Dynamic Services policy : dynsvc-policy-1
Number of scripts executed : 1
Number of scripts w success : 1
Last script action : setup
Time of last script action : 2013/02/26 16:37:10
Parameters of last action : vprn_1={'t':('VRF-1',65000,1000,'cpe-int-1','192.
: 168.20.1/24','2001:db8:cafe::1/64',901,901,910,92
: 0,'192.168.20.0/24','192.168.20.2')}
Accounting instance 1
Status : enabled
Stats type : volume-time
Update interval (minutes) : 30
Accounting instance 2
Status : enabled
Stats type : time
Update interval (minutes) : 0
-------------------------------------------------------------------------------
No. of SAP's: 1
===============================================================================
# show service dynamic-services saps summary
===============================================================================
Dynamic Services SAP's summary
===============================================================================
SAP Acct-Session-ID Acct-Session-ID-Ctrl
-------------------------------------------------------------------------------
1/1/1:1.901 242FFF000001AE512CE4B6 242FFF000001AB512CE4B6
-------------------------------------------------------------------------------
No. of SAP's: 1
===============================================================================
Output fields: dynamic services SAP describes Dynamic Services SAP fields.
|
Output field |
Description |
|---|---|
|
SAP |
The dynamic service SAP ID. |
|
Acct session-ID |
The dynamic service accounting session ID. |
|
Acct session-ID control |
The control channel accounting session ID. |
|
Service |
The dynamic service ID. |
|
Dynamic Services policy |
The policy referenced to setup the dynamic service. |
|
Number of scripts executed |
The number of times the script was executed for this dynamic service (setup, modify, revert or teardown). |
|
Number of scripts w success |
The number of times the script was executed successfully for this dynamic service. |
|
Last script action |
The setup, modify, revert, teardown. |
|
Time of last script action |
The timestamp of the last script action. |
|
Parameters of last action |
The content of the Dynamic Services Script Parameters attribute corresponding with the last action. |
|
Status |
RADIUS accounting is enabled or disabled. |
|
Stats type |
The type of statistics reported in accounting. |
|
Update interval (minutes) |
The time, in minutes, between Accounting Interim Update messages. |
satellite
satellite
Syntax
satellite
Context
[Tree] (clear>system satellite)
Full Context
clear system satellite
Description
Commands in this context clear satellite information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
satellite
Syntax
satellite
Context
[Tree] (show>system satellite)
Full Context
show system satellite
Description
This command displays a list of configured satellites including information about the satellite’s esat-ID or tsat-ID, satellite type, and state.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of satellite information.
Output ExampleA:Dut-A# show system satellite
===============================================================================
Satellite Information
===============================================================================
SatID Provisioned Type Admin Oper
Equipped Type (if different) State State
-------------------------------------------------------------------------------
esat-1 es48-1gb-sfp up provisioned
(not equipped)
esat-20 es48-1gb-sfp up up
tsat-2 ts4-choc3-sfp up up
tsat-3 ts4-choc3-sfp up up
-------------------------------------------------------------------------------
No. of Satellites: 4
===============================================================================
satellite
Syntax
satellite
Context
[Tree] (tools>perform satellite)
Full Context
tools perform satellite
Description
Commands in this context perform satellite operations.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
schedule
schedule
Syntax
schedule [schedule-name] [owner owner-name]
Context
[Tree] (show>system>cron schedule)
Full Context
show system cron schedule
Description
This command displays cron schedule parameters.
Parameters
- schedule-name
-
Specifies the scheduler name, up to 32 characters.
- owner-name
-
Specifies the scheduler owner name, up to 32 characters.
Platforms
All
Output
The following output is an example of cron schedule information. The following table describes the output fields.
Output ExampleA:sim1>show>cron schedule test
===============================================================================
CRON Schedule Information
===============================================================================
Schedule : test
Schedule owner : TiMOS CLI
Description : none
Administrative status : enabled
Operational status : enabled
Action : test
Action owner : TiMOS CLI
Script : test
Script Owner : TiMOS CLI
Script source location : ftp://*****:******@192.168.15.1/home/testlab_bgp
/cron/test1.cfg
Script results location : ftp://*****:******@192.168.15.1/home/testlab_bgp
/cron/res
Schedule type : periodic
Interval : 0d 00:01:00 (60 seconds)
Next scheduled run : 0d 00:00:42
Weekday : tuesday
Month : none
Day of month : none
Hour : none
Minute : none
Number of schedule runs : 10
Last schedule run : 2008/01/01 17:20:52
Number of schedule failures : 0
Last schedule failure : no error
Last failure time : never
===============================================================================
A:sim1>show>cron
|
Label |
Description |
|---|---|
|
Schedule |
Displays the schedule name. |
|
Schedule owner |
Displays the owner name of the action. |
|
Description |
Displays the schedule’s description. |
|
Administrative status |
Enabled — The administrative status is enabled. Disabled — Administratively disabled. |
|
Operational status |
Enabled — The operational status is enabled. Disabled — Operationally disabled. |
|
Action |
Displays the action name. |
|
Action owner |
Displays the name of action owner. |
|
Script |
Displays the name of the script. |
|
Script owner |
Displays the name of the script. |
|
Script owner |
Displays the name of the of script owner. |
|
Script source location |
Displays the location of scheduled script. |
|
Script results location |
Displays the location where the script results have been sent. |
|
Schedule type |
Periodic — Displays a schedule which ran at a given interval. Calendar — Displays a schedule which ran based on a calendar. Oneshot — Displays a schedule which ran one time only. |
|
Interval |
Displays the interval between runs of an event. |
|
Next scheduled run |
Displays the time for the next scheduled run. |
|
Weekday |
Displays the configured weekday. |
|
Month |
Displays the configured month. |
|
Day of Month |
Displays the configured day of month. |
|
Hour |
Displays the configured hour. |
|
Minute |
Displays the configured minute. |
|
Number of scheduled runs |
Displays the number of scheduled sessions. |
|
Last scheduled run |
Displays the last scheduled session. |
|
Number of scheduled failures |
Displays the number of scheduled sessions that failed to execute. |
|
Last scheduled failure |
Displays the last scheduled session that failed to execute. |
|
Last failure time |
Displays the system time of the last failure. |
scheduler-hierarchy
scheduler-hierarchy
Syntax
scheduler-hierarchy
Context
[Tree] (show>qos scheduler-hierarchy)
Full Context
show qos scheduler-hierarchy
Description
This command displays scheduler-hierarchy information.
Platforms
All
scheduler-name
scheduler-name
Syntax
scheduler-name scheduler-name
Context
[Tree] (show>qos scheduler-name)
Full Context
show qos scheduler-name
Description
This command displays the scheduler policies using the specified scheduler.
Parameters
- scheduler-name
-
The name of a scheduler configured in the config>qos>scheduler-policy>tier context.
Platforms
All
Output
The following output is an example of scheduler name information.
Output ExampleA:ALA-12# show qos scheduler-name NetworkControl
==================================================================
Scheduler : NetworkControl
==================================================================
Scheduler Policy : SLA1
Scheduler Policy : alpha
Scheduler Policy : beta
==================================================================
A:ALA-12#
scheduler-policy
scheduler-policy
Syntax
scheduler-policy [scheduler-policy-name] [ association | sap-ingress policy-id | sap-egress policy-id]
scheduler-policy scheduler-policy-name { ingress | egress} queue-group queue-grp-name
Context
[Tree] (show>qos scheduler-policy)
Full Context
show qos scheduler-policy
Description
Use this command to display scheduler policy information.
Parameters
- scheduler-policy-name
-
The name of a scheduler policy configured in the config>qos>scheduler-policy context.
- association
-
Displays the associations related to the specified scheduler name.
- sap-ingress policy-id
-
Specifies the SAP ingress QoS policy information.
- sap-egress policy-id
-
Specifies the SAP egress QoS policy information.
- {ingress | egress}
-
Specifies the direction to display and are mutually exclusive.
- queue-grp-name
-
Displays information for the specified queue group.
Platforms
All
Output
The following output is an example of scheduler policy information, and Output fields: QoS scheduler policy describes the customer scheduler hierarchy fields.
Output ExampleA:ALA-12# show qos scheduler-policy SLA1
==============================================================================
QoS Scheduler Policy
==============================================================================
Policy-Name : SLA1
Description : NetworkControl(3), Voice(2) and NonVoice(1) have strict priorities
-----------------------------------------------------------------------------
Tier/Scheduler Lvl/Wt PIR Parent
CIR Lvl/Wt CIR
------------------------------------------------------------------------------
1 All_traffic 1/1 11000 None
-/- max
2 NetworkControl 3/1 100 All_traffic
3/- max
2 NonVoice 1/1 11000 All_traffic
1/- max
2 Voice 2/1 5500 All_traffic
2/- max
3 Internet_be 1/1 max NonVoice
1/- max
3 Internet_priority 2/1 max NonVoice
2/- max
3 Internet_voice 1/1 max Voice
-/- max
3 VPN_be 1/1 max NonVoice
1/- max
3 VPN_nc 1/1 100 NetworkControl
-/- 36
3 VPN_priority 2/1 max NonVoice
2/- max
3 VPN_reserved 3/1 max NonVoice
3/- max
3 VPN_video 5/1 1500 NonVoice
5/- 1500
3 VPN_voice 1/1 2500 Voice
-/- 2500
==============================================================================
A:ALA-12# show qos scheduler-policy SLA1 association
=============================================================================
QoS Scheduler Policy
=============================================================================
Policy-Name : SLA1
Description : NetworkControl(3), Voice(2) and NonVoice(1) have strict priorities
------------------------------------------------------------------------------
Associations
------------------------------------------------------------------------------
Service-Id : 6000 (Epipe) Customer-Id : 274
- SAP : 1/1/3.1:0 (Egress)
Service-Id : 7000 (VPLS) Customer-Id : 7
- SAP : 1/1/5:0 (Egress)
- Multi Service Site : west (Ingress)
==============================================================================
A:ALA-12# show qos scheduler-policy SLA1 sap-egress 101
==============================================================================
Compatibility : Scheduler Policy SLA1 & Sap Egress 101
==============================================================================
Orphan Queues :
None Found
Hierarchy :
Root
|
|---(S) : All_traffic
| |
| |---(S) : NetworkControl
| | |
| | |---(S) : VPN_nc
| |
| |---(S) : NonVoice
| | |
| | |---(S) : Internet_be
| | |
| | |---(S) : Internet_priority
| | |
| | |---(S) : VPN_be
| | |
| | |---(S) : VPN_priority
| | |
| | |---(S) : VPN_reserved
| | |
| | |---(S) : VPN_video
| |
| |---(S) : Voice
| | |
| | |---(S) : Internet_voice
| | |
| | |---(S) : VPN_voice
==============================================================================
show qos scheduler-policy "sched1" sap-ingress 100
===============================================================================
Compatibility : Scheduler Policy sched1 & Sap Ingress 100
===============================================================================
Orphan Queues :
None Found
Orphan Policers :
None Found
Hierarchy :
Root
|
|---(S) : sch1
| |
| |---(S) : sch21
| | |
| | |---(Q) : 2
| | |
| | |---(P) : 16
| |
| |---(S) : sch22
| | |
| | |---(Q) : 3
| | |
| | |---(Q) : 17
|
|---(S) : sch2
| |
| |---(S) : sch23
| | |
| | |---(Q) : 4
| | |
| | |---(Q) : 18
| |
| |---(S) : sch24
| | |
| | |---(Q) : 5
| | |
| | |---(P) : 19
|
|---(Q) : 1
|
|---(Q) : 6
|
|---(Q) : 7
|
|---(Q) : 11
|
|---(Q) : 16
|
|---(Q) : 19
|
|---(P) : 17
|
|---(P) : 18
===============================================================================
|
Label |
Description |
|---|---|
|
Policy-Name |
Specifies the scheduler policy name. |
|
Description |
Specifies a text string that helps identify the policy context in the configuration file. |
|
Tier |
Specifies the level of hierarchy that a group of schedulers are associated with. |
|
Scheduler |
Specifies the scheduler name. |
|
Lvl/Wt |
Specifies the priority level of the scheduler when compared to other child schedulers and queues vying for bandwidth on the parent schedulers during the above-CIR distribution phase of bandwidth allocation. Weight defines the relative weight of this scheduler in comparison to other child schedulers and queues at the same level. |
|
Cir Lvl/Wt |
Specifies the level of hierarchy when compared to other schedulers and queues when vying for bandwidth on the parent scheduler. Weight defines the relative weight of this queue in comparison to other child schedulers and queues while vying for bandwidth on the parent scheduler. |
|
PIR |
Specifies the PIR rate. |
|
CIR |
Specifies the CIR rate. |
|
Parent |
Specifies the parent scheduler that governs the available bandwidth given the queue aside from the PIR setting of the queue. |
|
Service-Id |
Specifies the ID that uniquely identifies the policy. |
|
Customer-Id |
Specifies the ID that uniquely identifies the customer. |
|
SAP |
Specifies the Service Access Point (SAP) within the service where the policy is applied. |
|
Multi Service Site |
Specifies the multiservice site name. |
|
Orphan Queues |
Specifies the number of queues in an orphaned state. |
|
Hierarchy |
Displays the scheduler policy tree structure. |
scheduler-stats
scheduler-stats
Syntax
scheduler-stats
Context
[Tree] (clear>qos scheduler-stats)
Full Context
clear qos scheduler-stats
Description
This command clears scheduler statistics.
Platforms
All
scheduler-stats
Syntax
scheduler-stats
Context
[Tree] (show>qos scheduler-stats)
Full Context
show qos scheduler-stats
Description
This command displays scheduler statistics information.
Platforms
All
scheduler-stats
Syntax
scheduler-stats
Context
[Tree] (monitor>qos scheduler-stats)
Full Context
monitor qos scheduler-stats
Description
Commands in this context configure monitor commands for scheduler statistics.
Platforms
All
screen
screen
Syntax
screen
Context
[Tree] (clear screen)
Full Context
clear screen
Description
This command allows an operator to clear the Telnet or console screen.
Platforms
All
script
script
Syntax
script
Context
[Tree] (show>service>dynsvc script)
Full Context
show service dynamic-services script
Description
Commands in this context show dynamic services script information.
These commands are not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
script
Syntax
script [script-name] [owner script-owner]
Context
[Tree] (show>system>script-control script)
Full Context
show system script-control script
Description
This command displays script parameters.
Parameters
- script-name
-
Displays information for the specified script. 32 characters maximum.
- script-owner
-
Displays information for the specified script owner. 32 characters maximum.
Platforms
All
Output
The following output is an example of show script command information, and Output fields: script describes the output fields.
Output ExampleA:sim1>show>system>script-control# script
===============================================================================
Script Information
===============================================================================
Script : test
Owner name : TiMOS CLI
Description : asd
Administrative status : enabled
Operational status : enabled
Script source location : ftp://*****:******@192.168.100.1/home/testlab_bgp
/test1.cfg
Last script error : none
Last change : 2015/01/07 17:10:03
===============================================================================
A:sim1>show>cron#
|
Label |
Description |
|---|---|
|
Script |
Displays the name of the script. |
|
Script owner |
Displays the owner name of script. |
|
Administrative status |
Enabled — Administrative status is enabled. Disabled — Administratively disabled. |
|
Operational status |
Enabled — Operational status is enabled. Disabled — Operationally disabled. |
|
Script source location |
Displays the location of scheduled script. |
|
Last script error |
Displays the system time of the last error. |
|
Last change |
Displays the system time of the last change. |
script-control
script-control
Syntax
script-control
Context
[Tree] (show>system script-control)
Full Context
show system script-control
Description
Commands in this context display script information.
Platforms
All
script-control
Syntax
script-control
Context
[Tree] (tools>perform>system script-control)
Full Context
tools perform system script-control
Description
This command performs script-control operations.
Platforms
All
script-control
Syntax
script-control
Context
[Tree] (clear>system script-control)
Full Context
clear system script-control
Description
Commands in this context clear script information.
Platforms
All
script-policy
script-policy
Syntax
script-policy script-policy-name [owner owner-name]
script-policy run-history [run-state]
Context
[Tree] (show>system>script-control script-policy)
Full Context
show system script-control script-policy
Description
This command displays script policy information.
Parameters
- script-policy-name
-
Displays policy information for the specified script. 32 characters maximum.
- owner-name
-
Displays information for the specified script owner. 32 characters maximum.
- run-state
-
Displays information for script policies in the specified state.
Platforms
All
Output
The following output is an example of script policy information, and Output fields: script policy describes the output fields.
Output Example*A:Redundancy# show system script-control script-policy run-history terminated
===============================================================================
Script-policy Run History
===============================================================================
Script policy "test"
Owner "TiMOS CLI"
-------------------------------------------------------------------------------
Script Run #17
-------------------------------------------------------------------------------
Start time : 2006/11/06 20:30:09 End time : 2006/11/06 20:35:24
Elapsed time : 0d 00:05:15 Lifetime : 0d 00:00:00
State : terminated Run exit code : noError
Result time : 2006/11/06 20:35:24 Keep history : 0d 00:49:57
Error time : never
Results file : ftp://*:*@192.168.15.18/home/testlab_bgp/cron/_20061106-203008.
out
Run exit : Success
-------------------------------------------------------------------------------
Script Run #18
-------------------------------------------------------------------------------
Start time : 2006/11/06 20:35:24 End time : 2006/11/06 20:40:40
Elapsed time : 0d 00:05:16 Lifetime : 0d 00:00:00
State : terminated Run exit code : noError
Result time : 2006/11/06 20:40:40 Keep history : 0d 00:55:13
Error time : never
Results file : ftp://*:*@192.168.15.18/home/testlab_bgp/cron/_20061106-203523.
out
Run exit : Success
-------------------------------------------------------------------------------
*A:Redundancy#
*A:Redundancy# show system script-control script-policy run-history executing
===============================================================================
Script-policy Run History
===============================================================================
Script policy "test"
Owner "TiMOS CLI"
-------------------------------------------------------------------------------
Script Run #20
-------------------------------------------------------------------------------
Start time : 2006/11/06 20:46:00 End time : never
Elapsed time : 0d 00:00:56 Lifetime : 0d 00:59:04
State : executing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : ftp://*:*@192.168.15.18/home/testlab_bgp/cron/_20061106-204559.
out
===============================================================================
*A:Redundancy#
*A:Redundancy# show system script-control script-policy run-history initializing
===============================================================================
Script-policy Run History
===============================================================================
Script policy "test"
Owner "TiMOS CLI"
-------------------------------------------------------------------------------
Script Run #21
-------------------------------------------------------------------------------
Start time : never End time : never
Elapsed time : 0d 00:00:00 Lifetime : 0d 01:00:00
State : initializing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : none
-------------------------------------------------------------------------------
Script Run #22
-------------------------------------------------------------------------------
Start time : never End time : never
Elapsed time : 0d 00:00:00 Lifetime : 0d 01:00:00
State : initializing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : none
-------------------------------------------------------------------------------
Script Run #23
-------------------------------------------------------------------------------
Start time : never End time : never
Elapsed time : 0d 00:00:00 Lifetime : 0d 01:00:00
State : initializing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : none
===============================================================================
*A:Redundancy#
|
Label |
Description |
|---|---|
|
Script policy |
Displays the name of the script policy. |
|
Script policy owner |
Displays the name of the script policy owner. |
|
Administrative status |
Enabled — Administrative status is enabled. Disabled — Administrative status is disabled. |
|
Script |
Displays the name of the script. |
|
Script owner |
Displays the name of the script owner. |
|
Script source location |
Displays the location of scheduled script. |
|
Max running allowed |
Displays the maximum number of allowed sessions. |
|
Max completed run histories |
Displays the maximum number of sessions previously run. |
|
Max lifetime allowed |
Displays the maximum amount of time the script may run. |
|
Completed run histories |
Displays the number of completed sessions. |
|
Executing run histories |
Displays the number of sessions in the process of executing. |
|
Initializing run histories |
Displays the number of sessions ready to run/queued but not executed. |
|
Max time tun history saved |
Displays the maximum amount of time to keep the results from a script run. |
|
Last change |
Displays the system time a change was made to the configuration. |
|
Script start error |
Displays the error found while executing the script. |
|
Max row empire time |
Reserved for SNMP. |
|
Last application |
Displays the last application used to execute the script. |
|
Last auth. user account |
Displays the last user used to execute the script. If no user is specified in "configure system cli-script authorization event-handler/cron” then the user is not specified. |
script-policy
Syntax
script-policy
Context
[Tree] (tools>perform>system>script-control script-policy)
Full Context
tools perform system script-control script-policy
Description
This command performs script-policy operations.
Platforms
All
script-policy
Syntax
script-policy
Context
[Tree] (clear>system>script-control script-policy)
Full Context
clear system script-control script-policy
Description
Commands in this context clear script policy information.
Platforms
All
scripts
scripts
Syntax
scripts
Context
[Tree] (show>log>event-handling scripts)
Full Context
show log event-handling scripts
Description
This command displays handler configuration and script run queue information.
Platforms
All
Output
The following output is an example of log event handling script information.
Output Example===============================================================================
Event Handling System - Script Policy Association
===============================================================================
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
Event Handling System - Script Association
===============================================================================
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
Event Handling System - Script Launched List
===============================================================================
Run # Script owner Script name Script state
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
sctp-filter
sctp-filter
Syntax
sctp-filter sctp-filter-name
Context
[Tree] (show>app-assure>group sctp-filter)
Full Context
show application-assurance group sctp-filter
Description
This command displays Stream Control Transmission Protocol (SCTP) filter information
Parameters
- sctp-filter-name
-
Specifies an SCTP filter, up to 256 characters. When a filter is specified, all traffic is examined as described in the tmnxBsxSctpFltrTable.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
sdp
sdp
Syntax
sdp all | sdp-id:vc-id
Context
[Tree] (show>subscr-mgmt>errors sdp)
Full Context
show subscriber-mgmt errors sdp
Description
This command sorts all the subscriber errors by SDP.
Parameters
- all
-
Shows all errors beginning with the lowest SDP index.
- sdp-id:vc-id
-
Shows only the error of a specific SDP index.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
Output fields: subscriber management SDP error describes subscriber management SDP error output fields.
|
Field |
Description |
|---|---|
|
SDP |
The SDP ID associated with the error |
|
Time |
The time this error was reported to the subscriber management errors subsystem |
|
Service |
The service ID associated with the error |
|
MAC |
The MAC address associated with the error |
|
Error |
The error that occurred on the SDP |
|
Extra |
Extra information about the error that occurred |
sdp
Syntax
sdp [sdp-id [:vc-id]] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
sdp sdp-id [vc-id] l2tpv3
sdp sdp-id [:vc-id] static-isids [range-id range-id]
sdp sdp-id [:vc-id] static-isids mfib
sdp sdp-id [:vc-id] [detail] vccv-bfd [session]
sdp sdp-id [:vc-id] mrp
Context
[Tree] (show>service>id sdp)
Full Context
show service id sdp
Description
Displays information for the SDPs associated with the service. If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
- sdp-id [:vc-id]
-
Displays only information for the specified SDP ID.
- detail
-
Displays detailed SDP information.
- ip-address | ipv6-address
-
Displays only SDPs matching with the specified far-end IP address. 64 characters maximum.
- l2tpv3
-
Indicates that the user wants to display l2tpv3 specific information for SDPs that are of type l2tpv3.
- static-isids
-
Specifies the I-Component service IDs created on the SDP.
- range-id
-
Displays the service using the specified I-component Service ID (ISID).
- mfib
-
Display MFIB related information. This parameter applies to the 7450 ESS or7750 SR only.
- vccv-bfd
-
Displays detailed information about the VCCV BFD session for a spoke SDP.
- session
-
displays a summary of all VCCV sessions.
- mrp
-
Displays detailed MRP information.
Platforms
All
Output
The following command displays SDP information and Output fields: service ID SDP describes the output fields.
show service id sdp===============================================================================
Services: Service Destination Points
===============================================================================
SdpId Type Far End addr Adm Opr I.Lbl E.Lbl
-------------------------------------------------------------------------------
32767:4294967294 VplsPmsi not applicable Up Up None 3
32767:4294967295 VplsPmsi not applicable Up Up None 3
32767:4294967296 VplsPmsi not applicable Up Up None 3
-------------------------------------------------------------------------------
Number of SDPs : 3
-------------------------------------------------------------------------------
===============================================================================
The following command displays SDP details information and Output fields: service ID SDP describes the output fields.
show service id sdp detail===============================================================================
Services: Service Destination Points Details
===============================================================================
Sdp Id 1:1 -(10.20.1.2)
-------------------------------------------------------------------------------
Description : Default sdp description
SDP Id : 1:1 Type : Spoke
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 9186
Far End : 10.20.1.2 Delivery : MPLS
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 2048 Egress Label : 2048
Ing mac Fltr : n/a Egr mac Fltr : n/a
Ing ip Fltr : n/a Egr ip Fltr : n/a
Ing ipv6 Fltr : n/a Egr ipv6 Fltr : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 05/31/2007 00:45:43 Signaling : None
Last Mgmt Change : 05/31/2007 00:45:43
Class Fwding State : Up
Flags : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
MAC Aging : Enabled
L2PT Termination : Disabled BPDU Translation : Disabled
MAC Pinning : Disabled
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
MCAC Policy Name :
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
Associated LSP LIST :
Lsp Name : A_B_1
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m35s
Lsp Name : A_B_2
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m35s
Lsp Name : A_B_3
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_4
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_5
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_6
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_7
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_8
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m35s
Lsp Name : A_B_9
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
Lsp Name : A_B_10
Admin State : Up Oper State : Up
Time Since Last Tr*: 00h26m34s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : enabled
Default LSP : A_B_10 Multicast LSP : A_B_9
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
af A_B_3
be A_B_1
ef A_B_6
h1 A_B_7
h2 A_B_5
l1 A_B_4
l2 A_B_2
nc A_B_8
===============================================================================
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move : Blockable
Stp Admin State : Up Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : 2049 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: 0
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
The following command displays SDP details information and Output fields: service ID SDP describes the output fields.
show service id sdp detail===============================================================================
Service Destination Point (Sdp Id : 130:1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 130:1 -(10.20.1.1)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 130:1 Type : Spoke
Spoke Descr : (Not Specified)
VC Type : n/a VC Tag : n/a
Admin Path MTU : 1600 Oper Path MTU : 1600
Delivery : MPLS
Far End : 10.20.1.1 Tunnel Far End :
Oper Tunnel Far End: 10.20.1.1
LSP Types : LDP
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Entropy Label : Disabled
Admin State : Up Oper State : Up
MinReqd SdpOperMTU : n/a
Adv Service MTU : 1500
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 524236 Egress Label : 524257
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
BFD Template : BFD_VCCV
BFD-Enabled : yes BFD-Encap : ipv4
BFD Fail Action : down BFD Oper State : connected
BFD WaitForUpTimer : 0 secs
Last Status Change : 11/09/2020 17:04:44 Signaling : n/a
Last Mgmt Change : 11/09/2020 17:04:43
Class Fwding State : Down
Flags : None
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : lspPing bfdFaultDet
Peer Vccv CC Bits : mplsRouterAlertLabel
Application Profile: None
Transit Policy : None
AARP Id : None
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 804 E. Fwd. Octets : 41892
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false
Request Timer : <none>
Acknowledgement : false
-------------------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-------------------------------------------------------------------------------
Squelch Levels : None
Collect Lmm Stats : Disabled
LMM FC Stats : None
LMM FC In Prof : None
-------------------------------------------------------------------------------
LDP Information :
-------------------------------------------------------------------------------
LDP LSP Id : 65537
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn
Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : disabled
OSPF : disabled
TE-LSP : disabled
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
|
Label |
Description |
|---|---|
|
Sdp Id |
The SDP identifier. |
|
Type |
Indicates whether the SDP is a spoke or a mesh. |
|
Split Horizon Group |
Name of the split horizon group that the SDP belongs to. |
|
VC Type |
Displays the VC type: ether or vlan. |
|
VC Tag |
Displays the explicit dot1Q value used when encapsulating to the SDP far end. |
|
I. Lbl |
The VC label used by the far-end device to send packets to this device in this service by the SDP. |
|
Admin Path MTU |
The operating path MTU of the SDP is equal to the admin path MTU (when one is set) or the dynamically computed tunnel MTU, when no admin path MTU is set (the default case). |
|
Oper Path MTU |
The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
Far End addr/Far End |
Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. |
|
Delivery |
Specifies the type of delivery used by the SDP: GRE or MPLS. |
|
Adm/Admin State |
The administrative state of this SDP. |
|
Adv Service MTU |
Displays the configured advertise service MTU value (for Epipe services only). |
|
Opr/Oper State |
The operational state of this SDP. |
|
I.Lbl/Ingress Label |
The label used by the far-end device to send packets to this device in this service by this SDP. |
|
E.Lbl/Egress Label |
The label used by this device to send packets to the far-end device in this service by the SDP. |
|
BFD Template |
The BFD template name. |
|
BFD-Enabled |
The BFD enabled status. |
|
BFD-Encap |
The BFD encapsulation type. |
|
BFD Fail Action |
The BFD fail action. |
|
BFD Oper State |
The BFD operational state. |
|
BFD WaitForUpTimer |
The BFD wait for up timer value. |
|
Last Changed |
The date and time of the most recent change to the SDP. |
|
Signaling |
Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. |
|
Admin State |
The administrative state of the keepalive process. |
|
Oper State |
The operational state of the keepalive process. |
|
Hello Time |
Specifies how often the SDP echo request messages are transmitted on this SDP. |
|
Max Drop Count |
Specifies the maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault. |
|
Hello Msg Len |
Specifies the length of the SDP echo request messages transmitted on this SDP. |
|
Hold Down Time |
Specifies the amount of time to wait before the keepalive operating status is eligible to enter the alive state. |
|
I. Fwd. Pkts. |
Specifies the number of forwarded ingress packets. |
|
I. Dro. Pkts. |
Specifies the number of dropped ingress packets. |
|
E. Fwd. Pkts. |
Specifies the number of forwarded egress packets. |
|
Associated LSP List |
When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far end field. If the SDP type is GRE, then the following message displays: SDP delivery mechanism is not MPLS. |
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port [pw-port-id] [ statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end ip-address | ipv6-address keep-alive-history
sdp [sdp-id] detail
sdp far-end ip-address | ipv6-address detail
Context
[Tree] (show>service sdp)
Full Context
show service sdp
Description
This command displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters
- sdp-id
-
The SDP ID for which to display information.
- pw-port-id
-
Displays the SAP identifier for PW-SAPs.
- ip-address
-
Displays only SDPs matching with the specified far-end IP address.
- detail
-
Displays detailed SDP information.
- keep-alive-history
-
Displays the last fifty SDP keepalive events for the SDP.
Platforms
All
Output
The following output is an example of service SDP information.
Output Example============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port VC-Id Adm Encap Opr VC Type Egr Monitor
Shaper Oper
VPort Group
-------------------------------------------------------------------------------
1 1 up dot1q up ether
2 2 up qinq up ether
3 3 up dot1q up ether
4 4 up qinq up ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port pw-port-id [ statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end {ip-address | ipv6-address} keep-alive-history
sdp [sdp-id] detail
sdp far-end {ip-address | ipv6-address} [detail]
Context
[Tree] (show>service sdp)
Full Context
show service sdp
Description
This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
- sdp-id
-
Specifies the SDP ID for which to display information.
- pw-port-id
-
Specifies the pseudowire port identifier.
- ip-address
-
Displays only SDPs with the specified far-end IPv4 address. 64 characters maximum.
- ipv6-address
-
Displays only SDPs with the specified far-end IPv6 address. 64 characters maximum.
- detail
-
Displays detailed SDP information.
- keep-alive-history
-
Displays the last fifty SDP keepalive events for the SDP.
Platforms
All
Output
The following outputs are examples of SDP information.
Output Example*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port VC-Id Adm Encap Opr VC Type Egr Monitor
Shaper Oper
VPort Group
-------------------------------------------------------------------------------
1 1 up dot1q up ether
2 2 up qinq up ether
3 3 up dot1q up ether
4 4 up qinq up ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
*A:Dut-B# show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1 -10.20.1.3
-------------------------------------------------------------------------------
Description : Default sdp description
SDP Id : 1 SDP Source : manual
Admin Path MTU : 1514 Oper Path MTU : 1514
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : 10.20.1.3 LSP Types : LDP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 06/13/2017 17:14:05 Adv. MTU Over. : No
Last Mgmt Change : 06/13/2017 17:17:19 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
FPE LSP Id : 0
Weighted ECMP : Enabled
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : LDP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
LDP Information :
-------------------------------------------------------------------------------
LDP LSP Id : 65662
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : disabled
OSPF : disabled
TE-LSP : disabled
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port pw-port-id [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end {ip-address | ipv6-address} keep-alive-history
sdp [sdp-id] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
Context
[Tree] (show>service sdp)
Full Context
show service sdp
Description
This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
- sdp-id
-
Specifies the SDP ID for which to display information.
- pw-port-id
-
Specifies the pseudo-wire port identifier.
- statistics
-
Displays SDP statistics information.
- consistent
-
Indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent.
- inconsistent
-
Indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent.
- na
-
Indicates that there is no egress network interface that can carry traffic on this SDP.
- egressifs
-
Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP.
- ip-address | ipv6-address
-
Displays only SDPs matching with the specified far-end IP address up to 64 characters.
- keep-alive-history
-
Displays the last fifty SDP keepalive events for the SDP.
- detail
-
Displays detailed SDP information.
Platforms
All
Output
The following output is an example of SDP information, and Output fields: service SDP port describes the output fields.
Output Example*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port VC-Id Adm Encap Opr VC Type Egr Monitor
Shaper Oper
VPort Group
-------------------------------------------------------------------------------
1 1 up dot1q up ether
2 2 up qinq up ether
3 3 up dot1q up ether
4 4 up qinq up ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
*A:Dut-B# show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS I TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B#
*A:Dut-B# show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-ISIS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 01/28/2015 22:00:07 Adv. MTU Over. : No
Last Mgmt Change : 01/28/2015 21:59:53 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-ISIS
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524289
Oper Instance Id : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:Dut-B>config>service>sdp# show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS O TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
I = SR-ISIS, O = SR-OSPF
============================================================================
*A:ALA-12# show service sdp 2 detail
===============================================================================
Service Destination Point (Sdp Id : 2) Details
-------------------------------------------------------------------------------
Sdp Id 2 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : GRE-10.10.10.104
SDP Id : 2
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : GRE
Admin State : Up Oper State : Down
Weighted ECMP : Disabled VLAN VC Etype : 0x8100
Flags : SignalingSessDown TransportTunnDown
Signaling : TLDP Adv. MTU Over. : No
Last Status Change : 02/01/2007 09:11:39
Last Mgmt Change : 02/01/2007 09:11:46
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
===============================================================================
*A:ALA-12#
|
Label |
Description |
|---|---|
|
SDP Id |
The SDP identifier. |
|
Adm MTU |
Specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
Opr MTU |
Specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
IP address |
Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. |
|
Adm |
Admin State — Specifies the administrative state of the SDP. |
|
Opr |
Oper State — Specifies the operational state of the SDP. |
|
Deliver |
Specifies the type of delivery used by the SDP: GRE or MPLS. |
|
Flags |
Specifies the conditions that affect the operating status of this SDP. |
|
Signal Signaling |
Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP. |
|
Last Status Change |
Specifies the time of the most recent operating status change to this SDP. |
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port pw-port-id [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end {ip-address | ipv6-address} keep-alive-history
sdp [sdp-id] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
Context
[Tree] (show>service sdp)
Full Context
show service sdp
Description
This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
- sdp-id
-
Specifies the SDP ID for which to display information.
- pw-port-id
-
Specifies the pseudo-wire port identifier.
- statistics
-
Displays SDP statistics information.
- consistent
-
Indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent.
- inconsistent
-
Indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent.
- na
-
Indicates that there is no egress network interface that can carry traffic on this SDP.
- egressifs
-
Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP.
- ip-address | ipv6-address
-
Displays only SDPs matching with the specified far-end IP address. 64 characters maximum.
- keep-alive-history
-
Displays the last fifty SDP keepalive events for the SDP.
- detail
-
Displays detailed SDP information.
Platforms
All
Output
The following output is an example of SDP information.
Output Example*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port VC-Id Adm Encap Opr VC Type Egr Monitor
Shaper Oper
VPort Group
-------------------------------------------------------------------------------
1 1 up dot1q up ether
2 2 up qinq up ether
3 3 up dot1q up ether
4 4 up qinq up ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
The following output is an example of SDP information, and Output fields: service SDP describes the output fields.
Output Example*A:ALA-12# show service sdp
==============================================================================
Services: Service Destination Points
==============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
------------------------------------------------------------------------------
10 4462 4462 10.20.1.3 Up Dn NotReady MPLS TLDP
40 4462 1534 10.20.1.20 Up Up MPLS TLDP
60 4462 1514 10.20.1.21 Up Up GRE TLDP
100 4462 4462 203.0.0.2 Down Down GRE TLDP
500 4462 4462 10.20.1.50 Up Dn NotReady GRE TLDP
------------------------------------------------------------------------------
Number of SDPs : 5
==============================================================================
*A:ALA-12#
*A:ALA-12# show service sdp 2 detail
===============================================================================
Service Destination Point (Sdp Id : 2) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 2 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : GRE-10.10.10.104
SDP Id : 2
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : GRE
Admin State : Up Oper State : Down
Flags : SignalingSessDown TransportTunnDown
Signaling : TLDP VLAN VC Etype : 0x8100
Last Status Change : 02/01/2007 09:11:39 Adv. MTU Over. : No
Last Mgmt Change : 02/01/2007 09:11:46
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
===============================================================================
*A:ALA-12#
*A:Dut-B# show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS I TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B#
*A:Dut-B# show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-ISIS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 01/28/2015 22:00:07 Adv. MTU Over. : No
Last Mgmt Change : 01/28/2015 21:59:53 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-ISIS
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524289
Oper Instance Id : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
------------------------------------------------------------------------------
8 4462 4462 10.10.10.104 Up Dn NotReady MPLS TLDP
==============================================================================
Service Destination Point (Sdp Id : 8) Details
-------------------------------------------------------------------------------
Sdp Id 8 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : MPLS-10.10.10.104
SDP Id : 8
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : MPLS
Admin State : Up Oper State : Down
Flags : SignalingSessDown TransportTunnDown
Signaling : TLDP VLAN VC Etype : 0x8100
Last Status Change : 02/01/2007 09:11:39 Adv. MTU Over. : No
Last Mgmt Change : 02/01/2007 09:11:46
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
Lsp Name : to-104
Admin State : Up Oper State : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
|
Label |
Description |
|---|---|
|
SDP Id |
The SDP identifier. |
|
Adm MTU |
Specifies the largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
Opr MTU |
Specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
IP address |
Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. |
|
Adm |
Admin State — Specifies the state of the SDP. |
|
Opr |
Oper State —Specifies the operating state of the SDP. |
|
Flags |
Specifies all the conditions that affect the operating status of this SDP. |
|
Signal |
Signaling — Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP. |
|
Last Status Change |
Specifies the time of the most recent operating status change to this SDP. |
|
Last Mgmt Change |
Specifies the time of the most recent management-initiated change to this SDP. |
|
Number of SDPs |
Specifies the total number of SDPs displayed according to the criteria specified. |
|
Hello Time |
Specifies how often the SDP echo request messages are transmitted on this SDP. |
|
Deliver |
Delivered — Specifies the type of delivery used by the SDP: GRE or MPLS. |
|
Number of SDPs |
Specifies the total number of SDPs displayed according to the criteria specified. |
|
Hello Time |
Specifies how often the SDP echo request messages are transmitted on this SDP. |
|
Hello Msg Len |
Specifies the length of the SDP echo request messages transmitted on this SDP. |
|
Hello Timeout |
Specifies the number of seconds to wait for an SDP echo response message before declaring a timeout. |
|
Unmatched Replies |
Specifies the number of SDP unmatched message replies. |
|
Max Drop Count |
Specifies the maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault. |
|
Hold Down Time |
Specifies the maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault. |
|
TX Hello Msgs |
Specifies the number of SDP echo request messages transmitted since the keepalive was administratively enabled or the counter was cleared. |
|
Rx Hello Msgs |
Specifies the number of SDP echo request messages received since the keepalive was administratively enabled or the counter was cleared. |
|
Associated LSP List |
When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far end field. If the SDP type is GRE, then the following message displays: SDP delivery mechanism is not MPLS. |
sdp
Syntax
sdp sdp-id pw-port [pw-port-id] [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end ip-address keep-alive-history
sdp [sdp-id] [detail]
sdp far-end ip-address [detail]
Context
[Tree] (show>service sdp)
Full Context
show service sdp
Description
This command displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters
- sdp-id
-
The SDP ID for which to display information.
- far-end ip-address
-
Displays only SDPs matching with the specified far-end IP address.
- detail
-
Displays detailed SDP information.
- keep-alive-history
-
Displays the last fifty SDP keepalive events for the SDP.
- pw-port pw-port-id
-
Displays the SAP identifier for PW-SAPs.
Platforms
All
Output
The following output is an example of SDP information.
Output fields: service SDP describes the show service SDP output fields.
Output Example*A:Dut-D# show service id 1 sdp 17407:4294967294 detail
=======================================================================
Service Destination Point (Sdp Id : 17407:4294967294) Details
=======================================================================
-------------------------------------------------------------------------------
Sdp Id 17407:4294967294 -(not applicable)
-----------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 17407:4294967294 Type : VplsPmsi
Split Horiz Grp : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 9194 Oper Path MTU : 9194
Delivery : MPLS
Far End : not applicable
Tunnel Far End : n/a LSP Types : None
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 3
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 12/14/2012 12:42:22 Signaling : None
Last Mgmt Change : 12/14/2012 12:42:19 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None
Application Profile: None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
MAC Aging : Enabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
Ignore Standby Sig : False Block On Mesh Fail: False
Oper Group : (none) Monitor Oper Grp : (none)
Rest Prot Src Mac : Disabled
Auto Learn Mac Prot: Disabled RestProtSrcMacAct : Disable
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
-----------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-----------------------------------------------------------------------
V-MEP Filtering : Disabled
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 2979761 E. Fwd. Octets : 476761760
-----------------------------------------------------------------------
Control Channel Status
-----------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false Clear On Timeout : true
MCAC Policy Name :
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
=======================================================================
FC Mapping Table
=======================================================================
FC Name LSP Name
-----------------------------------------------------------------------
No FC Mappings
-----------------------------------------------------------------------
Stp Service Destination Point specifics
-----------------------------------------------------------------------
Stp Admin State : Down Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : 0 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-----------------------------------------------------------------------
Number of SDPs : 1
-----------------------------------------------------------------------
=======================================================================
A:Dut-F# show service sdp 1600 detail
===============================================================================
Service Destination Point (Sdp Id : 1600) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1600 -2.2.2.2
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1600 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1532
Delivery : GRE
Far End : 2.2.2.2 Tunnel Far End : n/a
Oper Tunnel Far End : 2.2.2.2
Local End : 6.6.6.6
LSP Types : n/a
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 10/04/2018 21:18:06 Adv. MTU Over. : No
Last Mgmt Change : 10/04/2018 21:17:59 VLAN VC Etype : 0x8100
Bw BookingFactor : 100
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Allow Fragmentation : No
FPE LSP Id : 0
Weighted ECMP : Disabled
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : n/a Active LSP Type : n/a
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
-------------------------------------------------------------------------------
MPLS-TP LSPs
-------------------------------------------------------------------------------
Associated LSP List :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : disabled
OSPF : disabled
TE-LSP : disabled
===============================================================================
*A:Dut-B# show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS I TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B#
*A:Dut-B# show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-ISIS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 01/28/2015 22:00:07 Adv. MTU Over. : No
Last Mgmt Change : 01/28/2015 21:59:53 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-ISIS
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524289
Oper Instance Id : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:Dut-B> show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS O TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
I = SR-ISIS, O = SR-OSPF
============================================================================
*A:Dut-B> show service sdp 230 detail
===============================================================================
Service Destination Point (Sdp Id : 230) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-OSPF
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 05/27/2015 03:08:37 Adv. MTU Over. : No
Last Mgmt Change : 05/27/2015 03:05:36 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-OSPF
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
OSPF : enabled LSP Id : 524289
Oper Instance Id : 0
===============================================================================
*A:Dut-B>config>service>sdp#
*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
------------------------------------------------------------------------------
8 4462 4462 10.10.10.104 Up Dn NotReady MPLS TLDP
==============================================================================
*A:ALA-12#
*A:ALA-12#
===============================================================================
Service Destination Point (Sdp Id : 8) Details
===============================================================================
Sdp Id 8 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : MPLS-10.10.10.104
SDP Id : 8
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : MPLS
Admin State : Up Oper State : Down
Flags : SignalingSessDown TransportTunnDown
Signaling : TLDP VLAN VC Etype : 0x8100
Last Status Change : 02/01/2007 09:11:39 Adv. MTU Over. : No
Last Mgmt Change : 02/01/2007 09:11:46
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
Lsp Name : to-104
Admin State : Up Oper State : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
*A:MV-SR12> show service sdp 10 detail
===============================================================================
Service Destination Point (Sdp Id : 10) Details
===============================================================================
Sdp Id 10 -(203.20.1.201)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 10 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 9182
Far End : 203.20.1.201 Delivery : MPLS/LDP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 02/12/2010 22:37:08 Adv. MTU Over. : No
Last Mgmt Change : 02/12/2010 22:37:03 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Mixed LSP Mode : Enabled
Revert Time : 0 Revert Count Down : n/a
Flags : None
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
-------------------------------------------------------------------------------
LDP Information :
-------------------------------------------------------------------------------
LDP LSP Id : 65539 LDP Active : No
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP LIST :
Lsp Name : To_7710
Admin State : Up Oper State : Up
Time Since Last Tran*: 01h20m56s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:MV-SR12>config>service>vprn#
*B:Dut-B>config>router>mpls>lsp# /show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1578 Up Up MPLS I TLDP
2001:db8::
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
I = SR-ISIS, O = SR-OSPF, T = SR-TE, F = FPE
============================================================================
*B:Dut-B>config>router>mpls>lsp# /show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 2001:db8::
-------------------------------------------------------------------------------
Description : Default sdp description
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1578
Delivery : MPLS
Far End : 2001:db8::
Tunnel Far End : n/a LSP Types : SR-ISIS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 07/12/2016 19:40:17 Adv. MTU Over. : No
Last Mgmt Change : 07/12/2016 19:40:04 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
FPE LSP Id : 0
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-ISIS
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524355
Oper Instance Id : 0
OSPF : disabled
TE-LSP : disabled
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*B:Dut-B>config>router>mpls>lsp# /show service id 1 sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230:1 -(2001:db8::)
-------------------------------------------------------------------------------
Description : Default sdp description
SDP Id : 230:1 Type : Spoke
Spoke Descr : Description for Sdp Bind 230 for Svc ID 1
VC Type : VLAN VC Tag : 0
Admin Path MTU : 0 Oper Path MTU : 1578
Delivery : MPLS
Far End : 2001:db8::
Tunnel Far End : n/a LSP Types : SR-ISIS
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Entropy Label : Disabled
Admin State : Up Oper State : Up
MinReqd SdpOperMTU : 1514
Adv Service MTU : n/a
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 262134 Egress Label : 262134
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Admin BW(Kbps) : 0 Oper BW(Kbps) : 0
BFD Template : None
BFD-Enabled : no BFD-Encap : ipv4
Last Status Change : 07/12/2016 19:40:18 Signaling : TLDP
Last Mgmt Change : 07/12/2016 19:40:04
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Force Vlan-Vc : Disabled Force Qinq-Vc : Disabled
Class Fwding State : Down
Flags : None
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : lspPing bfdFaultDet
Peer Vccv CC Bits : mplsRouterAlertLabel
Application Profile: None
Transit Policy : None
Standby Sig Slave : False
Block On Peer Fault: False
Use SDP B-MAC : False
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false
Request Timer : <none>
Acknowledgement : false
-------------------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-------------------------------------------------------------------------------
Squelch Levels : None
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524355
Oper Instance Id : 0
OSPF : disabled
TE-LSP : disabled
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
When network domains are configured, the SDP egress interface state can be verified by using the following command.
*A:Dut-T# show service sdp egressifs
===============================================================================
SDP Egress Ifs State Table
===============================================================================
SDP Id Network Domain State
-------------------------------------------------------------------------------
100 net1 consistent
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-Tr#
*A:Dut-C># show service sdp 1 pw-port
============================================================================
Service Destination Point (Sdp Id 1 Pw-Port )
=============================================================================
SDP Binding port : 1/1/3
SDP: 1 Pw-port: 11
----------------------------------------------------------------------------
VC-Id : 11 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : vlan Vlan VC Tag : 0
Oper Flags : (Not Specified)
SDP: 1 Pw-port: 44
-------------------------------------------------------------------------------
VC-Id : 2 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
----------------------------------------------------------------------------
Entries found: 2
-----------------------------------------------------------------------------
*A:Dut-C> #
*A:Dut-C> # show service sdp 1 pw-port 44
============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 44)
============================================================================
SDP Binding port : 1/1/3
VC-Id : 2 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
============================================================================
*A:Dut-C> #
The following show output gives the source-bmac-lsb and control PW used for a given SDP.
A:bksim1613# show service sdp 1 detail
===============================================================================
Service Destination Point (Sdp Id : 1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1 -2.2.2.2
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1556
Delivery : MPLS
Far End : 2.2.2.2
Tunnel Far End : n/a LSP Types : RSVP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 08/12/2013 06:33:57 Adv. MTU Over. : No
Last Mgmt Change : 08/12/2013 06:32:47 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : RSVP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 3 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : 00-13 Ctrl PW VC ID : 550
The following show output indicates whether use-sdp-bmac is applied to a given PW.
A:bksim1613# show service id 550 sdp 1:550 detail
===============================================================================
Service Destination Point (Sdp Id : 1:550) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1:550 -(2.2.2.2)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1:550 Type : Spoke
Spoke Descr : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 1556
Delivery : MPLS
Far End : 2.2.2.2
Tunnel Far End : n/a LSP Types : RSVP
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
MinReqd SdpOperMTU : 1514
Adv Service MTU : n/a
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 131048 Egress Label : 131063
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Admin BW(Kbps) : 0 Oper BW(Kbps) : 0
Last Status Change : 08/12/2013 06:33:57 Signaling : TLDP
Last Mgmt Change : 08/12/2013 06:32:47 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : lspPing
Peer Vccv CC Bits : mplsRouterAlertLabel
Application Profile: None
Transit Policy : None
Standby Sig Slave : False
Block On Peer Fault: False
Use sdp B-MAC : True
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false
Request Timer : <none>
Acknowledgement : false
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
Lsp Name : to-bksim1611-1
Admin State : Up Oper State : Up
Time Since Last Tr*: 05h44m54s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
|
Label |
Description |
|---|---|
|
SDP Id |
Displays the SDP identifier. |
|
Description |
Displays a text string describing the SDP. |
|
Admin Path MTU |
Displays the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel. |
|
Opr Path MTU |
Displays the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object minus the control word size (if applicable) must be equal to or larger than the MTU of the service, as defined by its service MTU. |
|
Far End |
Displays the far end IP address. |
|
Local End |
Displays the local end IP address. |
|
Delivery |
Displays the type of delivery used by the SDP: GRE or MPLS. |
|
IP address |
Displays the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. |
|
Adm Admin State |
Displays the desired state of the SDP. |
|
Opr Oper State |
Displays the operating state of the SDP. |
|
Flags |
Displays all the conditions that affect the operating status of this SDP. |
|
Signal Signaling |
Displays the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP. |
|
Last Status Change |
Displays the time of the most recent operating status change to this SDP. |
|
Adv. MTU Over |
Specifies whether the advertised MTU of a VLL spoke SDP bind includes the 14-byte Layer 2 header. |
|
Last Mgmt Change |
Displays the time of the most recent management-initiated change to this SDP. |
|
KeepAlive Information |
Displays Keepalive information. |
|
Hello Time |
Displays how often the SDP echo request messages are transmitted on this SDP. |
|
Hello Msg Len |
Displays the length of the SDP echo request messages transmitted on this SDP. |
|
Hello Timeout |
Displays the number of seconds to wait for an SDP echo response message before declaring a timeout. |
|
Unmatched Replies |
Displays the number of SDP unmatched message replies timer expired. |
|
Max Drop Count |
The maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault. |
|
Hold Down Time |
The amount of time to wait before the keepalive operating status is eligible to enter the alive state. |
|
TX Hello Msgs |
The number of SDP echo request messages transmitted since the keepalive was administratively enabled or the counter was cleared. |
|
Rx Hello Msgs |
The number of SDP echo request messages received since the keepalive was administratively enabled or the counter was cleared. |
|
Associated LSP List |
When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far end field. If the SDP type is GRE, the following message displays: SDP Delivery Mechanism is not MPLS. |
|
Lsp Name |
Displays the LSP name. |
|
Time Since Last Transaction |
Displays the time of the last transaction. |
|
Signaling |
Displays the signaling type. |
|
Collect Stats |
Specifies whether the agent collects accounting statistics for this SDP. When the value is true the agent collects accounting statistics on this SDP. |
|
VLAN VC Etype |
Displays the VLAN VC type. |
|
BW Booking Factor |
Displays the value used to calculate the max SDP available bandwidth. The value specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of is set to zero (0), no new VLL spoke SDP bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed. |
|
PBB Etype |
Displays the Ethertype used in frames sent out on this SDP when specified as vlan for Provider Backbone Bridging frames. |
|
Oper Max BW (kb/s) |
Displays the operational bandwidth in kilobits per seconds (kb/s) available for this SDP. The value is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP. |
|
Avail BW (kb/s) |
Displays the bandwidth that is still free for booking by the SDP bindings on the SDP. |
|
Net-Domain |
Displays the network-domain name configured on this SDP. The default value of this object is the default network-domain. |
|
Egr Interface |
Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP. not applicable: Indicates that there is no egress network interface that can carry traffic on this SDP. consistent: Indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent. inconsistent: Indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent. |
|
Revert Time |
Specifies the time to wait before reverting back from LDP to the configured LSPs, after having failed over to LDP. |
|
Revert Count Down |
Indicates the timer countdown before reverting back from LDP on this SDP. The timer countdown begins after the first configured LSP becomes active. |
|
Flags |
Displays all the conditions that affect the operating status of this SDP. |
|
Class Forwarding |
Indicates the admin state of class-based forwarding on this SDP. When the value is true, class-based forwarding is enabled. |
|
EnforceDSTELspFc |
Specifies whether service manager must validate with RSVP the support of the FC by the LSP. |
|
Default LSP |
Specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding. |
|
Multicast LSP |
Displays the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping. |
|
Number of SDPs |
Displays the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tie-breaker by Tunnel Table Manager users like MP-BGP to select route with lower value. |
sdp
Syntax
sdp sdp-id keep-alive
sdp sdp-id pw-port sdp-id
Context
[Tree] (clear>service>statistics sdp)
Full Context
clear service statistics sdp
Description
This command clears keep-alive statistics associated with the SDP ID.
Parameters
- sdp-id
-
The SDP ID for which to clear keepalive statistics.
- keep-alive
-
Clears keep-alive information associated with the SDP ID. The keep-alive history is not cleared.
Platforms
All
sdp
Syntax
sdp [sdp-id[:vc-id]] [ level level] [primary-vlan-enabled vlan-id]
Context
[Tree] (show>eth-cfm>mip-instantiation sdp)
Full Context
show eth-cfm mip-instantiation sdp
Description
This command displays MIP creation information for SDP bindings.
Parameters
- sdp-id
-
Specifies the value identifying the SDP.
- vc-id
-
Specifies the value identifying the virtual circuit identifier.
- level
-
Displays the MD level of the maintenance point.
- vlan-id
-
Specifies the Dot1Q VLAN ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
sdp
Syntax
sdp sdp-id:vc-id [test-service-id service-id] start
sdp sdp-id:vc-id stop
Context
[Tree] (tools>perform>service>id>admin-lock>pw sdp)
Full Context
tools perform service id admin-lock pw sdp
Description
This command specifies the spoke SDP binding to which an administrative lock will be applied for the MPLS-TP pseudowire. The administrative lock can be placed on a spoke SDP that is bound to a VLL SAP, another spoke SDP or a VPLS interface. Once the pseudowire is locked it may be put into loopback mode. The command must be executed at both ends of the pseudowire or MS-PW represented by the spoke SDP. Test traffic can then be injected using a configured test SAP on an Epipe, Apipe or Cpipe.
Parameters
- sdp-id:vc-id
-
Specifies the SDP-ID and VC-ID.
- test-service-id
-
Keyword that specifies the ID of a test service (SAP) to which the SDP is bound.
Platforms
All
sdp
Syntax
sdp sdp-id:vc-id start mode [mac-swap] [mac ieee-address] [all]
sdp sdp-id:vc-id stop
Context
[Tree] (tools>perform>service>id>loopback>eth sdp)
Full Context
tools perform service id loopback eth sdp
Description
This command places the specific MPLS SDP binding in loopback mode for reflecting Ethernet traffic back in the direction of the received stream. This is only applicable to MPLS SDP Bindings.
Parameters
- sdp-id:vc-id
-
Specifies the SDP ID and VC-ID.
- start mode
-
Specifies the loopback in relation to the MPLS SDP Binding.
- stop
-
Keyword that removes the MPLS SD-binding from loopback mode.
- mac-swap
-
Enable source address and destination address swapping for the reflected packets when the arriving packet is unicast. Any broadcast and multicast packets arriving on a looped point will be dropped.
- mac ieee-address
-
Optionally configure the source MAC address used in the reflected packet when the arriving packet is a broadcast or multicast. This does not apply to arriving unicast packets.
- all
-
Configured ieee-address is used as the source address for all reflected packets regardless of the arriving destination.
- mac-swap
-
No swapping of MAC addresses are performed without specifying this option and any non-unicast destined packets will not be reflected back to the source.
Platforms
All
sdp
Syntax
sdp sdp-id:vc-id {start | stop}
Context
[Tree] (tools>perform>service>id>loopback>pw sdp)
Full Context
tools perform service id loopback pw sdp
Description
This command places or removes the specified MPLS-TP SDP binding in loopback mode for the purpose of an MPLS-TP pseudowire test service.
The loopback is created at the PW level so everything under the PW label is looped back. It is recommended to configure an administrative lock for the MPLS-TP pseudowire for the specified test service prior to configuring the loopback.
Parameters
- sdp-id:vc-id
-
Specifies the SDP-ID and VC-ID.
- start
-
Keyword that places the specified MPLS-TP PW in loopback mode for the purpose of an MPLS_TP PW test service.
- stop
-
Keyword that removes the SDP binding from the loopback mode for the MPLS-TP pseudowire test service.
Platforms
All
sdp
Syntax
sdp {sdp-id [:vc-id] | far-end ip-address} [interval seconds] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>service>id sdp)
Full Context
monitor service id sdp
Description
This command monitors statistics for an SDP binding associated with this service.
Parameters
- sdp-id
-
Specifies the SDP identifier.
- ip-address
-
Specifies the system address of the far-end router for the SDP in dotted decimal notation. The string may be up to 32 characters.
- seconds
-
Configures the interval for each display, in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays absolute rate-per-second value for each statistic.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
All
Output
The following output is an example of SDP information.
Output ExampleA:ALA-12# monitor service id 100 sdp 10 repeat 3
===============================================================================
Monitor statistics for Service 100 SDP binding 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 22 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 33 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
A:ALA-12#
sdp-group
sdp-group
Syntax
sdp-group [group-name]
Context
[Tree] (show>service sdp-group)
Full Context
show service sdp-group
Description
This show command will display the SDPs and the PW templates that are associated with the group-name.
Platforms
All
Output
The following output is an example of SDP group information.
Output Example*A:Dut-B# show service sdp-group
==================================================
SDP Group Information
==================================================
Group Value
--------------------------------------------------
red 1
blue 2
--------------------------------------------------
Entries found: 2
==================================================
*A:Dut-B#
*A:Dut-B# show service sdp-group "red"
=======================================================================
SDP-Group Information
=======================================================================
Name : red Value : 1
Associated SDPs
=======================================================================
SdpId : 204 Sdp-Group : red
SdpId : 205 Sdp-Group : red
-----------------------------------------------------------------------
Number of Entries: 2
=======================================================================
Associated pw-template included
=======================================================================
Pw-Template : 1 Sdp-Group : red
-----------------------------------------------------------------------
Number of Entries: 1
=======================================================================
Associated pw-template excluded
=======================================================================
No Entries found
=======================================================================
*A:Dut-B#
sdp-group-using
sdp-group-using
Syntax
sdp-group-using
Context
[Tree] (show>service sdp-group-using)
Full Context
show service sdp-group-using
Description
This command displays groups using SDP.
Platforms
All
Output
The following output is an example of information pertaining to objects using SDP groups.
Output Example*A:Dut-D# show service sdp-group-using
=======================================================================
SDP-Group Information
=======================================================================
SdpId : 402 Sdp-Group : red
SdpId : 405 Sdp-Group : red
SdpId : 4021 Sdp-Group : blue
SdpId : 4051 Sdp-Group : blue
Associated pw-template included
=======================================================================
Pw-Template : 1 Sdp-Group : red
Pw-Template : 2 Sdp-Group : blue
Associated pw-template excluded
=======================================================================
No Entries found
=======================================================================
*A:Dut-D#
sdp-using
sdp-using
Syntax
sdp-using etree
sdp-using node-id node-id [global-id global-id]
sdp-using aarp aarpID
sdp-using app-profile app-profile-name
sdp-using far-end {ip-address | ipv6-address}
sdp-using [sdp-id[:vc-id]]
sdp-using transit-policy ip transit-ip-policy
sdp-using transit-policy prefix transit-prefix-policy
Context
[Tree] (show>service sdp-using)
Full Context
show service sdp-using
Description
This command displays services using SDP or far-end address options.
Parameters
- node-id
-
Specifies the node ID.
- global-id
-
Specifies the global ID.
- aarpID
-
Specifies the AARP instance ID.
- app-profile-name
-
32 characters max.
- sdp-id
-
Displays only services bound to the specified SDP ID.
- vc-id
-
The virtual circuit identifier.
- ip-address
-
Displays only services matching with the specified far-end IP address. 64 characters maximum.
- ipv6-address
-
Displays only services matching with the specified far-end IPv6 address. 64 characters maximum.
- transit-ip-policy
-
Specifies a transit IP policy ID.
- transit-prefix-policy
-
Specifies a transit prefix policy ID.
Platforms
All
Output
The following output is an example of SDP using information, and Output fields: service SDP using describes the output fields.
Output Example*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId SdpId Type Far End Opr State I.Label E.Label
-------------------------------------------------------------------------------
1 300:1 Mesh 10.0.0.13 Up 131071 131071
2 300:2 Spok 10.0.0.13 Up 131070 131070
100 300:100 Mesh 10.0.0.13 Up 131069 131069
101 300:101 Mesh 10.0.0.13 Up 131068 131068
102 300:102 Mesh 10.0.0.13 Up 131067 131067
-------------------------------------------------------------------------------
Number of SDPs : 5
-------------------------------------------------------------------------------
*A:ALA-1#
The following output is an example of VPLS E-Tree configured SDP bindings.
*A:DutA# show service sdp-using etree
===========================================================================
Etree SDP-BIND Information
===========================================================================
Svc Id SDP-BIND Information Type Root- Leaf-Ac
leaf-tag
---------------------------------------------------------------------------
2005 12:2005 Spoke Enabled N/A
2005 12:2006 Spoke Disabled Enabled
2005 12:2007 Spoke Disabled Enabled
---------------------------------------------------------------------------
Number of etree sdp-binds: 3
===========================================================================
|
Label |
Description |
|---|---|
|
Svc ID |
The service identifier. |
|
Sdp ID |
The SDP identifier. |
|
Type |
Type of SDP: spoke or mesh. |
|
Far End |
The far end address of the SDP. |
|
Oper State |
The operational state of the service. |
|
Ingress Label |
The label used by the far-end device to send packets to this device in this service by this SDP. |
|
Egress Label |
The label used by this device to send packets to the far-end device in this service by this SDP. |
|
Etree SDP Bind Information |
|
|
Svc ID |
The service identifier. |
|
SDP-Bind |
The leaf tag SDP bind identifier. |
|
Type |
The type SDP bind. |
|
Root-Leaf-Tag |
The state of the root leaf tag SDP bind, |
|
Leaf-AC |
The state of the leaf AC SDP bind. |
seamless-bfd
seamless-bfd
Syntax
seamless-bfd
Context
[Tree] (show>router>bfd seamless-bfd)
Full Context
show router bfd seamless-bfd
Description
This command displays Seamless-BFD information.
Platforms
All
seamless-bfd
Syntax
seamless-bfd
Context
[Tree] (clear>router>bfd seamless-bfd)
Full Context
clear router bfd seamless-bfd
Description
Commands in this context clear Seamless-BFD session and statistics information.
Platforms
All
secure-boot
secure-boot
Syntax
secure-boot
Context
[Tree] (tools>dump>system>security secure-boot)
Full Context
tools dump system security secure-boot
Description
This command displays secure boot settings.
Platforms
7750 SR-1, 7750 SR-s, 7950 XRS-20e
security
security
Syntax
security
Context
[Tree] (show>system security)
Full Context
show system security
Description
Commands in this context display security configuration information.
Platforms
All
security
Syntax
security
Context
[Tree] (tools>dump security)
Full Context
tools dump security
Description
Commands in this context dump tools for security.
Platforms
All
security
Syntax
security
Context
[Tree] (tools>dump>system security)
Full Context
tools dump system security
Description
Commands in this context display tools for system security.
Platforms
7750 SR-1, 7750 SR-s, 7950 XRS-20e
security
Syntax
security
Context
[Tree] (tools>perform security)
Full Context
tools perform security
Description
This command enables tools for testing security.
Platforms
All
security-policy
security-policy
Syntax
security-policy router [Base] [security-policy-id security-policy-id]
security-policy service service-id [security-policy-id security-policy-id]
Context
[Tree] (show>ipsec security-policy)
Full Context
show ipsec security-policy
Description
This command displays
Parameters
- service-id
-
Specifies the service-id of the tunnel delivery service.
- security-policy-id
-
Specifies the IPsec security policy entry that this tunnel will use.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of the show ipsec security-policy command.
Output Example*A:ALA-48>show>ipsec# security-policy 1
========================================================================
Security Policy Param Entries
========================================================================
SvcId Security Policy LocalIp RemoteIp
PlcyId ParamsId
------------------------------------------------------------------------
1 1 1 0.0.0.0/0 0.0.0.0/0
------------------------------------------------------------------------
No. of IPsec Security Policy Param Entries: 1
========================================================================
*A:ALA-48>show>ipsec#
seen-ip
seen-ip
Syntax
seen-ip transit-ip-policy ip-policy-id
seen-ip transit-ip-policy ip-policy-id clear
Context
[Tree] (tools>dump>app-assure seen-ip)
Full Context
tools dump application-assurance seen-ip
Description
This command dumps application-assurance seen-ip information for a specified transit-ip policy.
Parameters
- ip-policy-id
-
An integer that identifies a transit IP profile entry.
- clear
-
Clears the seen IP information after reading.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
segment-routing
segment-routing
Syntax
segment-routing
Context
[Tree] (clear>router segment-routing)
Full Context
clear router segment-routing
Description
Commands in this context clear segment routing statistics.
Platforms
All
segment-routing
Syntax
segment-routing
Context
[Tree] (show>router segment-routing)
Full Context
show router segment-routing
Description
Commands in this context display segment routing information.
Platforms
All
segment-routing
Syntax
segment-routing
Context
[Tree] (tools>dump>router segment-routing)
Full Context
tools dump router segment-routing
Description
Commands in this context display segment routing information.
Platforms
All
segment-routing
Syntax
segment-routing
Context
[Tree] (monitor>router segment-routing)
Full Context
monitor router segment-routing
Description
Commands in this context monitor Segment Routing Statistics.
Platforms
All
segment-routing-v6
segment-routing-v6
Syntax
segment-routing-v6 [summary]
Context
[Tree] (show>router segment-routing-v6)
Full Context
show router segment-routing-v6
Description
Commands in this context display SRv6 information.
Parameters
- summary
-
Displays information in a summarized format.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
Output
Use the following command to display SRv6 information.
show router segment-routing-v6 summary===============================================================================
Segment Routing v6
===============================================================================
Origination FPE : 1
Source IPv6 Address :
-------------------------------------------------------------------------------
Micro Segment
-------------------------------------------------------------------------------
Block Length : 48 bits
Global Entries : 12 (16384 uNs)
SID Length : 16 bits
===============================================================================
Locator Admin State
Prefix
-------------------------------------------------------------------------------
C1 Up
3333:3:3:3::/64
-------------------------------------------------------------------------------
Locators : 1
-------------------------------------------------------------------------------
===============================================================================
Micro Segment Locator Admin/Oper St
Prefix
-------------------------------------------------------------------------------
msl1 Up/Up
3333:3:3:3::/64
-------------------------------------------------------------------------------
Micro Segment Locators : 1
-------------------------------------------------------------------------------
===============================================================================
segment-routing-v6
Syntax
segment-routing-v6
Context
[Tree] (show>router>isis segment-routing-v6)
Full Context
show router isis segment-routing-v6
Description
Commands in this context display IS-IS SRv6 information.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
segment-routing-v6
Syntax
segment-routing-v6 [ip-address]
Context
[Tree] (show>service segment-routing-v6)
Full Context
show service segment-routing-v6
Description
This command displays SRv6 information.
Parameters
- ip-address
-
Specifies the IP address.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
segment-routing-v6
Syntax
segment-routing-v6 [instance instance] [locator locator-name] [end-dt4] [end-dt6] [end-dt46] [end-dx2] [end-dt2u] [end-dt2m]
segment-routing-v6 detail
segment-routing-v6 [instance instance] destinations
segment-routing-v6 [instance instance] esi esi
segment-routing-v6 [instance instance] micro [micro-segment-locator ms-locator-name] [udx2] [udt2m] [udt2u] [udt4] [udt6] [udt46]
Context
[Tree] (show>service>id segment-routing-v6)
Full Context
show service id segment-routing-v6
Description
This command displays SRv6 service information.
Parameters
- instance
-
Specifies the instance ID for display.
- locator-name
-
Specifies the locator name for display, up to 64 characters.
- end-dt4
-
Displays the End.DT4 function associated with the SRv6 instance in the service.
- end-dt6
-
Displays the End.DT6 function associated with the SRv6 instance in the service.
- end-dt46
-
Displays the End.DT46 function associated with the SRv6 instance in the service.
- end-dx2
-
Displays the End.DX2 function associated with the SRv6 instance in the service.
- end-dt2u
-
Displays the End.DT2U function associated with the SRv6 instance in the service.
- end-dt2m
-
Displays the End.DT2M function associated with the SRv6 instance in the service.
- destinations
-
Specifies that all destinations for display are included.
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example,ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ').
- ms-locator-name
-
Specifies the micro-segment locator name for display, up to 64 characters.
- udt4
-
Displays the uDT4 function associated with the SRv6 instance in the service.
- udt6
-
Displays the uDT6 function associated with the SRv6 instance in the service.
- udt46
-
Displays the uDT46 function associated with the SRv6 instance in the service.
- udx2
-
Displays the uDX2 function associated with the SRv6 instance in the service.
- udt2u
-
Displays the uDT2U function associated with the SRv6 instance in the service.
- udt2m
-
Displays the uDT2M function associated with the SRv6 instance in the service.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
Output
Output ExampleOutput fields: SRv6 instance describes the SRv6 instance field descriptions.
Use the following command to display SRv6 instance and destination information.
show service id "bd-1900-srv6" segment-routing-v6 instance 1 destinations ===============================================================================
TEP, SID (Instance 1)
===============================================================================
TEP Address Segment Id Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
192.0.2.3 cafe:1:0:3:7b1c:9000:: Up BUM 0
192.0.2.4 cafe:1:0:4:7:b1ca:: Up BUM 0
192.0.2.5 cafe:1:0:5:7b1c:e000:: Up BUM 0
192.0.2.5 cafe:1:0:5:7b1c:f000:: Up - 1
-------------------------------------------------------------------------------
Number of TEP, SID: 4
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
Segment Routing v6 Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
show service id "bd-1900-srv6" segment-routing-v6 instance 1 destinations detail ===============================================================================
TEP, SID (Instance 1)
===============================================================================
TEP Address Segment Id Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
192.0.2.3 cafe:1:0:3:7b1c:9000:: Up BUM 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/23/2023 11:12:29
192.0.2.4 cafe:1:0:4:7:b1ca:: Up BUM 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/23/2023 11:12:29
192.0.2.5 cafe:1:0:5:7b1c:e000:: Up BUM 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/23/2023 11:12:29
192.0.2.5 cafe:1:0:5:7b1c:f000:: Up - 1
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/23/2023 11:12:29
-------------------------------------------------------------------------------
Number of TEP, SID: 4
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
Segment Routing v6 Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------|
Field |
Description |
|---|---|
|
Locator |
The locator name |
|
Type |
The type |
|
Function |
The function |
|
SID |
The segment ID |
|
Status |
The status |
|
Instance |
The instance |
|
Mcast |
The multicast value |
|
TEP Address |
The tunnel endpoint IP address |
|
Segment Id |
The segment ID |
|
L2 PBR |
The layer 2 policy based routing value |
|
EvpnStatic |
The EVPN static value |
|
SupBcasDom |
The Sup BCast Domain value |
|
Num MACs |
The number of MACs |
|
Number of TEP, SID |
The total number of TEP and SIDs |
|
No Matching Entries |
The number of matching entries |
selective-fib-log
selective-fib-log
Syntax
selective-fib-log
Context
[Tree] (tools>dump>router selective-fib-log)
Full Context
tools dump router selective-fib-log
Description
This command configures the dump tools for selective FIB log information for a specific IOM.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS
Output
The following output is an example of selective FIB log information.
Output Example*A:Dut-C# /tools dump router selective-fib-log
1 : 2020/01/08 13:32:59.100 : Creating Base router
2 : 2020/01/08 13:32:59.101 : Adding port system to if=system Base router
2 : 2020/01/08 13:32:59.103 : Creating management router
3 : 2020/01/08 13:32:59.103 : Creating vpls-management instance
4 : 2020/01/08 13:32:59.103 : Adding port A/1 to if=management management router
4 : 2020/01/08 13:40:55.404 : Adding port 1/1/5 to if=ip-10.10.5.5 Base router
4 : 2020/01/08 13:40:55.407 : Adding port 2/1/6 to if=ip-10.10.7.7 Base router
4 : 2020/01/08 13:40:55.411 : Adding port 2/1/2 to if=ip-10.10.11.11 Base router
4 : 2020/01/08 13:40:55.414 : Adding port 2/1/2 to if=ip-10.10.13.13 Base router
4 : 2020/01/08 13:40:55.417 : Adding port 2/1/2 to if=ip-10.10.15.15 Base router
4 : 2020/01/08 13:40:55.420 : Adding port 1/1/1 to if=ip-10.10.17.18 Base router
4 : 2020/01/08 13:40:55.423 : Adding port 1/1/3 to if=ip-10.10.21.22 Base router
4 : 2020/01/08 13:40:55.427 : Adding port 2/1/3 to if=ip-10.10.23.24 Base router
4 : 2020/01/08 13:40:55.430 : Adding port 2/1/4 to if=ip-10.10.25.26 Base router
4 : 2020/01/08 13:40:55.433 : Adding port 1/1/2 to if=ip-10.10.27.28 Base router
4 : 2020/01/08 13:40:55.436 : Adding port 2/1/1 to if=ip-10.10.31.31 Base router
4 : 2020/01/08 13:40:55.440 : Adding port 3/1/3 to if=ip-10.10.39.40 Base router
4 : 2020/01/08 13:40:55.443 : Adding port 3/1/1 to if=ip-10.10.43.44 Base router
4 : 2020/01/08 13:40:55.446 : Adding port 3/1/2 to if=ip-10.10.45.45 Base router
4 : 2020/01/08 13:40:55.449 : Adding port 2/2/2 to if=ip-10.10.47.47 Base router
4 : 2020/01/08 13:40:55.453 : Adding port 2/2/1 to if=ip-10.10.49.49 Base router
4 : 2020/01/08 13:40:55.456 : Adding port 1/1/4 to if=ip-10.10.61.61 Base router
4 : 2020/01/08 13:40:55.459 : Adding port 2/1/5 to if=ip-10.10.63.63 Base router
4 : 2020/01/08 13:40:55.465 : Creating router 10105151
5 : 2020/01/08 13:40:55.470 : Adding port 1/2/1 to if=vprn-10.10.51.51 router 10105151
5 : 2020/01/08 13:40:55.475 : Creating router 10105152
6 : 2020/01/08 13:40:55.480 : Adding port 1/2/2 to if=vprn-10.10.51.52 router 10105152
6 : 2020/01/08 13:41:10.678 : Removing port 1/1/4 from if=ip-10.10.61.61 Base router
6 : 2020/01/08 13:41:10.681 : Removing port 1/2/1 from if=vprn-10.10.51.51 router 10105151
6 : 2020/01/08 13:41:10.684 : Removing port 1/2/2 from if=vprn-10.10.51.52 router 10105152
6 : 2020/01/08 13:41:10.690 : Removing port 2/1/2 from if=ip-10.10.11.11 Base router
6 : 2020/01/08 13:41:10.692 : Removing port 2/1/2 from if=ip-10.10.15.15 Base router
6 : 2020/01/08 13:41:10.693 : Removing port 2/1/2 from if=ip-10.10.13.13 Base router
6 : 2020/01/08 13:41:10.698 : Removing port 2/1/5 from if=ip-10.10.63.63 Base router
6 : 2020/01/08 13:41:10.711 : Removing port 1/1/1 from if=ip-10.10.17.18 Base router
6 : 2020/01/08 13:41:10.713 : Removing port 1/1/3 from if=ip-10.10.21.22 Base router
6 : 2020/01/08 13:41:10.715 : Removing port 2/1/3 from if=ip-10.10.23.24 Base router
6 : 2020/01/08 13:41:10.717 : Removing port 2/1/4 from if=ip-10.10.25.26 Base router
6 : 2020/01/08 13:41:10.720 : Removing port 1/1/2 from if=ip-10.10.27.28 Base router
6 : 2020/01/08 13:41:10.722 : Removing port 2/1/1 from if=ip-10.10.31.31 Base router
6 : 2020/01/08 13:41:10.724 : Removing port 3/1/3 from if=ip-10.10.39.40 Base router
6 : 2020/01/08 13:41:10.727 : Removing port 3/1/1 from if=ip-10.10.43.44 Base router
6 : 2020/01/08 13:41:10.729 : Removing port 3/1/2 from if=ip-10.10.45.45 Base router
6 : 2020/01/08 13:41:10.731 : Removing port 2/2/2 from if=ip-10.10.47.47 Base router
6 : 2020/01/08 13:41:10.733 : Removing port 2/2/1 from if=ip-10.10.49.49 Base router
6 : 2020/01/08 13:41:10.735 : Removing port 1/1/5 from if=ip-10.10.5.5 Base router
6 : 2020/01/08 13:41:10.741 : Removing port 2/1/6 from if=ip-10.10.7.7 Base router
6 : 2020/01/08 13:41:10.751 : Deleting router 10105151
6 : 2020/01/08 13:41:10.756 : Deleting router 10105152
6 : 2020/01/08 13:41:15.713 : Adding port 1/1/4 to if=to_Ixia3 Base router
6 : 2020/01/08 13:41:15.723 : Adding port 2/1/5 to if=to_Ixia.24 Base router
6 : 2020/01/08 13:41:22.170 : Removing port 1/1/4 from if=to_Ixia3 Base router
6 : 2020/01/08 13:41:22.176 : Removing port 2/1/5 from if=to_Ixia.24 Base router
6 : 2020/01/08 13:58:37.666 : Enable system selective-fib
7 : 2020/01/08 13:59:17.668 : Creating router 1
8 : 2020/01/08 13:59:17.669 : Setting vrf-target on router 1
8 : 2020/01/08 13:59:17.670 : Enable auto-bind-tunnel for router 1
8 : 2020/01/08 13:59:17.676 : Adding port 1/1/2 to if=to_Dut-B router 1
9 : 2020/01/08 14:01:17.851 : Setting disable-selective-fib for router 1
10 : 2020/01/08 14:03:58.104 : Disable system selective-fib
11 : 2020/01/08 14:07:59.686 : Removing port 1/1/2 from if=to_Dut-B router 1
11 : 2020/01/08 14:07:59.699 : Deleting router 1
*A:Dut-C#
send-force-renew
send-force-renew
Syntax
send-force-renew ip-address
Context
[Tree] (tools>perform>router>dhcp>server send-force-renew)
Full Context
tools perform router dhcp local-dhcp-server send-force-renew
Description
This command sends a DHCP FORCERENEW message on behalf of the DHCP server to the DHCP client with specified IP address. A DHCP lease with the specified IP address must exist in the DHCP server.
Parameters
- ip-address
-
Specifies the DHCP client’s IP address in dotted notation a.b.c.d.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
sensor-group
sensor-group
Syntax
sensor-group name
sensor-group
Context
[Tree] (show>system>telemetry sensor-group)
Full Context
show system telemetry sensor-group
Description
This command displays the sensor group information.
Parameters
- name
-
Specifies the sensor group name, up to 32 characters.
Platforms
All
Output
The following output is an example of telemetry sensor group information and Output fields: sensor group describes the output fields.
Output Example# show system telemetry sensor-group
===============================================================================
Telemetry sensor-groups
===============================================================================
Name Valid Invalid
paths paths
-------------------------------------------------------------------------------
miro 1 0
-------------------------------------------------------------------------------
No. of Telemetry sensor-groups: 1
===============================================================================
|
Label |
Description |
|---|---|
|
Name |
Displays the name of the telemetry sensor group name. |
|
Valid paths |
Displays the number of valid sensor group paths. |
|
Invalid paths |
Displays the number of invalid sensor group paths. |
|
No. of Telemetry sensor-groups |
Displays the total number of telemetry sensor groups. |
server
server
Syntax
server all
server capability
server prefix ip-prefix/prefix-length
server
Context
[Tree] (show>test-oam>twamp server)
Full Context
show test-oam twamp server
Description
This command displays TWAMP server information.
Parameters
- all
-
Displays all server information.
- ip-prefix/prefix-length
-
Specifies the IP address prefix of the TWAMP server.
- capability
-
Displays the modes referenced or supported by the TWAMP server, with an RFC reference where those modes are defined.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of TWAMP server information.
Output Example*A:ALA-48# show test-oam twamp server
==============================================================================
TWAMP Server (port 862)
==============================================================================
Admin State : Up Oper State : Up
Up Time : 0d 00:00:05
Curr Conn : 1 Max Conn : 32
ConnTimeout : 1800 Conn Reject : 2
Curr Sess : 2 Max Sess : 32
Tests Done : 5 Tests Rej : 0
Tests Abort : 0
TstPktsRx : 999 TstPktsTx : 999
==============================================================================
Prefix : 10.0.0.0/8
Tests Abort : 0
TstPktsRx : 999 TstPktsTx : 999
==============================================================================
Prefix : 10.0.0.0/8
Description : NMS-West
==============================================================================
Admin State : Up Oper State : Up
Curr Conn : 1 Max Conn : 32
Conn Reject : 0
Curr Sess : 2 Max Sess : 32
Tests Done : 5 Tests Rej : 0
Tests Abort : 0
TstPktsRx : 999 TstPktsTx : 999
------------------------------------------------------------------------------
Client Sessions Idle TstPktsRx TstPktsTx
Curr/Done/Rej/Abort
------------------------------------------------------------------------------
10.1.1.1 2/5/0/0 920 999 999
==============================================================================
==============================================================================
Prefix : 10.0.0.0/16
Description : NMS-West-Special
==============================================================================
Admin State : Up Oper State : Up
Curr Conn : 0 Max Conn : 32
Conn Reject : 0
Curr Sess : 0 Max Sess : 32
Tests Done : 0 Tests Rej : 0
Tests Abort : 0
TstPktsRx : 0 TstPktsTx : 0
------------------------------------------------------------------------------
Client Sessions Idle TstPktsRx TstPktsTx
Curr/Done/Rej/Abort
------------------------------------------------------------------------------
==============================================================================
*A:ALA-48# show test-oam twamp server capability
==============================================================================
TWAMP Server Supported Modes of Operation with RFC Reference
==============================================================================
Bit Value Description RFC
------------------------------------------------------------------------------
0 1 Unauthenticated 5357
4 16 Individual Session Control 5938
5 32 Reflect Octets Capability 6038
6 64 Symmetrical Size Sender Test Packet Format 6038
===============================================================================
server
Syntax
server
Context
[Tree] (clear>test-oam>twamp server)
Full Context
clear test-oam twamp server
Description
This command clears TWAMP server statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
server
Syntax
server
Context
[Tree] (tools>dump>test-oam>twamp server)
Full Context
tools dump test-oam twamp server
Description
This command dumps TWAMP server information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
server-stats
server-stats
Syntax
server-stats
Context
[Tree] (show>router>dhcp6>server server-stats)
[Tree] (show>router>dhcp>server server-stats)
Full Context
show router dhcp6 local-dhcp-server server-stats
show router dhcp local-dhcp-server server-stats
Description
This command displays DHCP or DHCP6 server statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of server statics information
Output Example*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS1 server-stats
==============================================================================
Statistics for DHCP Server dhcpS1 router Base
==============================================================================
Rx Discover Packets : 0
Rx Request Packets : 0
Rx Release Packets : 0
Rx Decline Packets : 0
Rx Inform Packets : 0
Tx Offer Packets : 0
Tx Ack Packets : 0
Tx Nak Packets : 0
Tx Forcerenew Packets : 0
Client Ignored Offers : 0
Leases Timed Out : 0
Dropped Bad Packet : 0
Dropped Invalid Type : 0
Dropped No User Database : 0
Dropped Unknown Host : 0
Dropped User Not Allowed : 0
Dropped Lease Not Ready : 0
Dropped Lease Not Found : 0
Dropped Not Serving Pool : 0
Dropped Invalid User : 0
Dropped Overload : 0
Dropped Persistence Overload : 0
Dropped Generic Error : 0
Dropped Destined To Other : 0
Dropped Address Unavailable : 0
Dropped Max Leases Reached : 0
Dropped Server Shutdown : 0
Dropped No Subnet For Fixed IP: 0
==============================================================================
*A:SUB-Dut-A#
*A:cses-V26>show>router>dhcp6>server# server-stats
===============================================================================
Statistics for DHCPv6 Server test1 router Base
===============================================================================
Rx Solicit Packets : 0
Rx Request Packets : 0
Rx Confirm Packets : 0
Rx Renew Packets : 0
Rx Rebind Packets : 0
Rx Decline Packets : 0
Rx Release Packets : 0
Rx Information Request Packets: 0
Rx Leasequery Packets : 0
Tx Advertise Packets : 0
Tx Reply Packets : 0
Tx Reconfigure Packets : 0
Tx Leasequery Reply Packets : 0
Client Ignored Offers : 0
Leases Timed Out : 0
Dropped Bad Packet : 0
Dropped Invalid Type : 0
Dropped Lease Not Ready : 0
Dropped Not Serving Pool : 0
Dropped Overload : 0
Dropped Persistence Overload : 0
Dropped Generic Error : 0
Dropped Destined To Other : 0
Dropped Max Leases Reached : 0
Dropped Server Shutdown : 0
Dropped Leasequery Not Allowed: 0
Dropped Duplicate : 0
Dropped busy primary audit : 0
Rx Int. PPP SLAAC Requests : 0
Rx Int. IPoE SLAAC Requests : 0
Rx Int. IPoE WAN Requests : 0
Rx Int. IPsec : 0
Rx Internal Releases : 0
Dropped Internal w/Failover : 0
Dropped Internal w/Int-id-map : 0
Dropped Internal w/User-ident : 0
Dropped Internal w/Conflicts : 0
Failover statistics
-------------------------------------------------------------------------------
Dropped Invalid Packets : 0
Failover Shutdown : 0
Lease Already Expired : 0
Maximum Lease Count Reached : 0
Prefix Not Found : 0
Host Conflict : 0
Address Conflict : 0
Peer conflict : 0
Persistence congestion : 0
No Lease Hold Time Configured : 0
Invalid Prefix Length : 0
Lease Not Found : 0
===============================================================================
*A:cses-V26>show>router>dhcp6>server#
Output fields: server statistics describes server stats show command output fields.
|
Field |
Description |
|---|---|
|
RX Discover Packets |
The number of discover packets received by the DHCP server instance |
|
Rx Request Packets |
The number of request packets received by the DHCP server instance. |
|
Rx Release Packets |
The number of released packets received by the DHCP server instance |
|
Rx Decline Packets |
The number of declined packets received by the DHCP server instance |
|
Rx Inform Packets |
The number of inform packets received by the DHCP server instance |
|
Tx Offer Packets |
The number of offer packets sent by the DHCP server instance |
|
Tx Ack Packets |
The number of DHCP ACK packets sent by the DHCP server instance |
|
Tx Nak Packets |
The number of DHCP NAK packets sent by the DHCP server instance |
|
Tx Forcerenew Packets |
The number of DHCP force renew packets sent by the server instance |
|
Client Ignored Offers |
The number of DHCP offer packets sent by the DHCP server instance that were ignored by clients |
|
Leases Timed Out |
The number of leases timed out |
|
Dropped Bad Packet |
The number of dropped of DHCP packets received that were corrupt |
|
Dropped Invalid Type |
The number of DHCP packets received that had an invalid message type |
|
Dropped No User Database |
The number of DHCP packets dropped because the value of this server instance is not equal to the default value and a local user database with that name could not be found |
|
Dropped Unknown Host |
The number of DHCP packets dropped from hosts which were not found in the user database |
|
Dropped User Not Allowed |
The number of DHCP packets dropped from hosts which are found in the user database, but which have no address or pool specified |
|
Dropped Lease Not Ready |
The number of DHCP packets dropped by the server instance before the lease database was ready |
|
Dropped Lease Not Found |
The number of DHCP packets dropped by the server instance because no (valid) lease was found |
|
Dropped Not Serving Pool |
The number of DHCP packets dropped by the server instance because there were no more free addresses in the pool |
|
Dropped Invalid User |
The number of DHCP packets dropped by the server instance because the MAC address of the sender or the option 82 didn't match the host lease state |
|
Dropped Overload |
The number of DHCP packets dropped by the server instance because they were received more than the server instance can handle |
|
Dropped Persistence Overload |
The number of DHCP packets dropped by the server instance because they were received in more than the DHCP persistence system can handle. If this occurs, only releases and declines are still processed. |
|
Dropped Generic Error |
The number of DHCP packets dropped by the server instance because of a generic error |
|
Dropped Destined To Other |
The number of DHCP requests dropped by the server instance because the (broadcast) request was not destined to this server |
|
Dropped Address Unavailable |
The number of DHCP requests dropped by the server instance because the requested address is not available |
|
Dropped Max Leases Reached |
The number of DHCP packets dropped by the server instance because the maximum number of leases was reached |
|
Dropped Server Shutdown |
The number of DHCP packets dropped by the server instance during server instance shutdown |
|
Dropped No Subnet for Fixed IP |
The number of DHCP packets dropped by the server instance for user-db hosts with a fixed address because the subnet to which the address belongs is not configured |
server-stats
Syntax
server-stats
Context
[Tree] (clear>router>dhcp6>server server-stats)
[Tree] (clear>router>dhcp>server server-stats)
Full Context
clear router dhcp6 local-dhcp-server server-stats
clear router dhcp local-dhcp-server server-stats
Description
This command clears all local DHCP or DHCPv6server statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR