Obsolete commands

This chapter provides a list of commands that are marked as “status obsolete” in the Nokia YANG models and the MD-CLI. These commands can no longer be used and are considered invalid. Only releases in which commands are initially obsoleted are included in this section. If applicable, the equivalent configuration groups command is also obsoleted (but not explicitly listed).

See the SR OS Software Release Notes for more information.

26.3.R1

anysec commands:

  • configure anysec security-termination-policies

  • configure anysec security-termination-policies policy

  • configure anysec security-termination-policies policy admin-state

  • configure anysec security-termination-policies policy apply-groups

  • configure anysec security-termination-policies policy apply-groups-exclude

  • configure anysec security-termination-policies policy flex-algo-id

  • configure anysec security-termination-policies policy igp-instance-id

  • configure anysec security-termination-policies policy local-address

  • configure anysec security-termination-policies policy policy-name

  • configure anysec security-termination-policies policy protocol

  • configure anysec security-termination-policies policy rx-must-be-encrypted

  • configure anysec service-encryption

  • configure anysec service-encryption encryption-group

  • configure anysec service-encryption encryption-group admin-state

  • configure anysec service-encryption encryption-group apply-groups

  • configure anysec service-encryption encryption-group apply-groups-exclude

  • configure anysec service-encryption encryption-group ca-name

  • configure anysec service-encryption encryption-group encryption-label

  • configure anysec service-encryption encryption-group group-name

  • configure anysec service-encryption encryption-group peer

  • configure anysec service-encryption encryption-group peer admin-state

  • configure anysec service-encryption encryption-group peer apply-groups

  • configure anysec service-encryption encryption-group peer apply-groups-exclude

  • configure anysec service-encryption encryption-group peer peer-ip-address

  • configure anysec service-encryption encryption-group security-termination-policy

  • configure anysec tunnel-encryption

  • configure anysec tunnel-encryption encryption-group

  • configure anysec tunnel-encryption encryption-group admin-state

  • configure anysec tunnel-encryption encryption-group allow-entropy-label

  • configure anysec tunnel-encryption encryption-group apply-groups

  • configure anysec tunnel-encryption encryption-group apply-groups-exclude

  • configure anysec tunnel-encryption encryption-group ca-name

  • configure anysec tunnel-encryption encryption-group encryption-label

  • configure anysec tunnel-encryption encryption-group group-name

  • configure anysec tunnel-encryption encryption-group peer

  • configure anysec tunnel-encryption encryption-group peer admin-state

  • configure anysec tunnel-encryption encryption-group peer apply-groups

  • configure anysec tunnel-encryption encryption-group peer apply-groups-exclude

  • configure anysec tunnel-encryption encryption-group peer peer-ip-address

  • configure anysec tunnel-encryption encryption-group peer-tunnel-attributes

  • configure anysec tunnel-encryption encryption-group peer-tunnel-attributes flex-algo-id

  • configure anysec tunnel-encryption encryption-group peer-tunnel-attributes igp-instance-id

  • configure anysec tunnel-encryption encryption-group peer-tunnel-attributes protocol

  • configure anysec tunnel-encryption encryption-group security-termination-policy

filter commands:

  • configure filter ip-filter embed openflow

  • configure filter ip-filter embed openflow admin-state

  • configure filter ip-filter embed openflow apply-groups

  • configure filter ip-filter embed openflow apply-groups-exclude

  • configure filter ip-filter embed openflow grt

  • configure filter ip-filter embed openflow of-switch

  • configure filter ip-filter embed openflow offset

  • configure filter ip-filter embed openflow sap

  • configure filter ip-filter embed openflow system

  • configure filter ip-filter embed openflow vpls

  • configure filter ip-filter embed openflow vprn

  • configure filter ip-filter entry action forward esi-l2

  • configure filter ip-filter entry action forward esi-l2 esi-value

  • configure filter ip-filter entry action forward esi-l2 vpls

  • configure filter ip-filter entry action forward esi-l3

  • configure filter ip-filter entry action forward esi-l3 esi-value

  • configure filter ip-filter entry action forward esi-l3 sf-ip

  • configure filter ip-filter entry action forward esi-l3 vas-interface

  • configure filter ip-filter entry action forward esi-l3 vprn

  • configure filter ipv6-filter embed openflow

  • configure filter ipv6-filter embed openflow admin-state

  • configure filter ipv6-filter embed openflow apply-groups

  • configure filter ipv6-filter embed openflow apply-groups-exclude

  • configure filter ipv6-filter embed openflow grt

  • configure filter ipv6-filter embed openflow of-switch

  • configure filter ipv6-filter embed openflow offset

  • configure filter ipv6-filter embed openflow sap

  • configure filter ipv6-filter embed openflow system

  • configure filter ipv6-filter embed openflow vpls

  • configure filter ipv6-filter embed openflow vprn

  • configure filter ipv6-filter entry action forward esi-l2

  • configure filter ipv6-filter entry action forward esi-l2 esi-value

  • configure filter ipv6-filter entry action forward esi-l2 vpls

  • configure filter ipv6-filter entry action forward esi-l3

  • configure filter ipv6-filter entry action forward esi-l3 esi-value

  • configure filter ipv6-filter entry action forward esi-l3 sf-ip

  • configure filter ipv6-filter entry action forward esi-l3 vas-interface

  • configure filter ipv6-filter entry action forward esi-l3 vprn

  • configure filter mac-filter entry action forward esi-l2

  • configure filter mac-filter entry action forward esi-l2 esi-value

  • configure filter mac-filter entry action forward esi-l2 vpls

macsec commands:

  • configure macsec connectivity-association static-cak mka-hello-interval

  • configure macsec connectivity-association static-cak mka-key-server-priority

router commands:

  • configure router interface gre-termination

  • configure router interface if-attribute delay dynamic measurement-template

  • configure router nat outside dnat-only

  • configure router nat outside dnat-only route-limit

service commands:

  • configure service epipe bgp-evpn segment-routing-v6 srv6

  • configure service epipe bgp-evpn segment-routing-v6 srv6 default-locator

  • configure service epipe bgp-evpn segment-routing-v6 srv6 instance

  • configure service vprn mvpn provider-tunnel inclusive umh-rate-monitoring traffic-rate-delta

  • configure service vprn mvpn provider-tunnel selective umh-rate-monitoring group traffic-rate-delta

  • configure service vprn nat outside dnat-only

  • configure service vprn nat outside dnat-only route-limit

system commands:

  • configure system bluetooth

  • configure system bluetooth admin-state

  • configure system bluetooth advertising-timeout

  • configure system bluetooth apply-groups

  • configure system bluetooth apply-groups-exclude

  • configure system bluetooth device

  • configure system bluetooth device apply-groups

  • configure system bluetooth device apply-groups-exclude

  • configure system bluetooth device description

  • configure system bluetooth device mac-address

  • configure system bluetooth module

  • configure system bluetooth module apply-groups

  • configure system bluetooth module apply-groups-exclude

  • configure system bluetooth module cpm-slot

  • configure system bluetooth module provisioned-identifier

  • configure system bluetooth pairing-button

  • configure system bluetooth passkey

  • configure system bluetooth power-mode

  • configure system grpc md-cli

  • configure system grpc md-cli admin-state

  • configure system management-interface remote-management

  • configure system management-interface remote-management admin-state

  • configure system management-interface remote-management allow-unsecure-connection

  • configure system management-interface remote-management apply-groups

  • configure system management-interface remote-management apply-groups-exclude

  • configure system management-interface remote-management client-tls-profile

  • configure system management-interface remote-management connection-timeout

  • configure system management-interface remote-management delay-on-boot

  • configure system management-interface remote-management device-label

  • configure system management-interface remote-management device-name

  • configure system management-interface remote-management hello-interval

  • configure system management-interface remote-management manager

  • configure system management-interface remote-management manager admin-state

  • configure system management-interface remote-management manager allow-unsecure-connection

  • configure system management-interface remote-management manager apply-groups

  • configure system management-interface remote-management manager apply-groups-exclude

  • configure system management-interface remote-management manager client-tls-profile

  • configure system management-interface remote-management manager connection-timeout

  • configure system management-interface remote-management manager description

  • configure system management-interface remote-management manager device-label

  • configure system management-interface remote-management manager device-name

  • configure system management-interface remote-management manager manager-address

  • configure system management-interface remote-management manager manager-name

  • configure system management-interface remote-management manager manager-port

  • configure system management-interface remote-management manager router-instance

  • configure system management-interface remote-management manager source-address

  • configure system management-interface remote-management manager source-port

  • configure system management-interface remote-management router-instance

  • configure system management-interface remote-management source-address

  • configure system management-interface remote-management source-port

  • configure system security aaa local-profiles profile grpc rpc-authorization md-cli-session

  • configure system security aaa user-template access bluetooth

  • configure system security user-params local-user user access bluetooth