qos
qos
+ classifiers
+ dot1p-policy name string
+ dot1p value number
+ drop-probability keyword
+ forwarding-class (reference | keyword)
+ dscp-policy name string
+ dscp value number
+ drop-probability keyword
+ forwarding-class (reference | keyword)
+ mpls-traffic-class-policy name string
+ traffic-class value number
+ drop-probability keyword
+ forwarding-class (reference | keyword)
+ multifield
+ ipv4-policy name string
+ entry sequence-id number
+ action
+ drop-probability keyword
+ forwarding-class (keyword | reference)
+ rewrite
+ set-dscp number
+ match
+ destination-ip
+ address string
+ mask string
+ prefix string
+ destination-port
+ operator keyword
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ dscp-set (number | keyword)
+ first-fragment boolean
+ fragment boolean
+ icmp
+ code number
+ type (number | keyword)
+ protocol (number | keyword)
+ source-ip
+ address string
+ mask string
+ prefix string
+ source-port
+ operator keyword
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ tcp-flags string
- tcam-entries
- forwarding-complex complex-identifier string
- input-total number
- output-total number
- single-instance number
+ ipv6-policy name string
+ entry sequence-id number
+ action
+ drop-probability keyword
+ forwarding-class (keyword | reference)
+ rewrite
+ set-dscp number
+ match
+ destination-ip
+ address string
+ mask string
+ prefix string
+ destination-port
+ operator keyword
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ dscp-set (number | keyword)
+ icmp6
+ code number
+ type (number | keyword)
+ next-header (number | keyword)
+ source-ip
+ address string
+ mask string
+ prefix string
+ source-port
+ operator keyword
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ tcp-flags string
- tcam-entries
- forwarding-complex complex-identifier string
- input-total number
- output-total number
- single-instance number
+ vxlan-default reference
+ explicit-congestion-notification
+ ecn-dscp-policy reference
+ forwarding-classes
+ forwarding-class name string
+ forwarding-class-index number
+ output
+ multicast-queue reference
+ unicast-queue reference
+ policer-templates
+ policer-template name string
+ policer sequence-id number
+ committed-burst-size number
+ committed-rate-kbps number
+ exceed-action
+ drop-probability keyword
+ forwarding-class fc (reference | keyword)
+ forwarding-type keyword
+ maximum-burst-size number
+ peak-rate-kbps number
+ violate-action
+ drop
+ drop-probability keyword
+ statistics-mode keyword
+ preserve-dscp boolean
+ queue-templates
+ queue-template name string
+ active-queue-management
+ ecn-slope ecn-drop-probability keyword
+ max-probability number
+ max-threshold-percent number
+ min-threshold-percent number
+ weight-factor number
+ wred-slope traffic-type keyword drop-probability keyword
+ max-probability number
+ max-threshold-percent number
+ min-threshold-percent number
+ queue-depth
+ high-threshold-bytes number
+ maximum-burst-size number
+ queues
+ queue name string
+ rewrite-rules
+ dot1p-policy name string
+ map forwarding-class (reference | keyword)
+ dot1p number
+ drop-probability drop-probability keyword
+ dot1p number
+ dscp-policy name string
+ map forwarding-class (reference | keyword)
+ drop-probability drop-probability keyword
+ dscp (number | keyword)
+ dscp (number | keyword)
+ mpls-traffic-class-policy name string
+ map forwarding-class (reference | keyword)
+ drop-probability drop-probability keyword
+ traffic-class number
+ traffic-class number
+ vxlan-outer-header-dscp-policy reference
+ scheduler-policies
+ scheduler-policy name string
+ scheduler sequence number
+ input id string
+ queue (reference | keyword)
+ weight number
+ priority keyword
qos Descriptions
qos
classifiers
Description | Enter the classifiers context | |
Context | qos classifiers | |
Tree | classifiers | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
dot1p-policy name string
Description | Enter the dot1p-policy list instance | |
Context | qos classifiers dot1p-policy name string | |
Tree | dot1p-policy | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
name string
Description | User-configured name for a 802.1p prioriy code point mapping policy The name 'default' is reserved for the system default dot1p mapping policy. | |
Context | qos classifiers dot1p-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
dot1p value number
Description | Enter the dot1p list instance | |
Context | qos classifiers dot1p-policy name string dot1p value number | |
Tree | dot1p | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
value number
Description | Enter the value context | |
Context | qos classifiers dot1p-policy name string dot1p value number | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
drop-probability keyword
Description | The drop probability to which the dot1p value is mapped | |
Context | qos classifiers dot1p-policy name string dot1p value number drop-probability keyword | |
Tree | drop-probability | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
forwarding-class (reference | keyword)
Description | The forwarding class to which the dot1p value is mapped | |
Context | qos classifiers dot1p-policy name string dot1p value number forwarding-class (reference | keyword) | |
Tree | forwarding-class | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
dscp-policy name string
Description | Enter the dscp-policy list instance | |
Context | qos classifiers dscp-policy name string | |
Tree | dscp-policy | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
name string
Description | User-configured name for a DSCP mapping policy The name 'default' is reserved for the system default DSCP mapping policy. | |
Context | qos classifiers dscp-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
dscp value number
Description | Enter the dscp list instance | |
Context | qos classifiers dscp-policy name string dscp value number | |
Tree | dscp | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
value number
Description | Enter the value context | |
Context | qos classifiers dscp-policy name string dscp value number | |
Range | 0 to 63 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
drop-probability keyword
Description | The drop probability to which the DSCP value is mapped | |
Context | qos classifiers dscp-policy name string dscp value number drop-probability keyword | |
Tree | drop-probability | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
forwarding-class (reference | keyword)
Description | The forwarding class to which the DSCP value is mapped | |
Context | qos classifiers dscp-policy name string dscp value number forwarding-class (reference | keyword) | |
Tree | forwarding-class | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
mpls-traffic-class-policy name string
Description | Enter the mpls-traffic-class-policy list instance | |
Context | qos classifiers mpls-traffic-class-policy name string | |
Tree | mpls-traffic-class-policy | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
name string
Description | User-configured name for an MPLS traffic-class mapping policy The name 'default' is reserved for the system default MPLS TC mapping policy. | |
Context | qos classifiers mpls-traffic-class-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
traffic-class value number
Description | Enter the traffic-class list instance | |
Context | qos classifiers mpls-traffic-class-policy name string traffic-class value number | |
Tree | traffic-class | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
value number
Description | A single traffic-class value | |
Context | qos classifiers mpls-traffic-class-policy name string traffic-class value number | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
drop-probability keyword
Description | The drop probability to which the traffic-class value is mapped | |
Context | qos classifiers mpls-traffic-class-policy name string traffic-class value number drop-probability keyword | |
Tree | drop-probability | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
forwarding-class (reference | keyword)
Description | The forwarding class to which the MPLS traffic-class value is mapped | |
Context | qos classifiers mpls-traffic-class-policy name string traffic-class value number forwarding-class (reference | keyword) | |
Tree | forwarding-class | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
multifield
Description | Container for multifield classification policies | |
Context | qos classifiers multifield | |
Tree | multifield | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
ipv4-policy name string
Description | List of IPv4 classifier policies | |
Context | qos classifiers multifield ipv4-policy name string | |
Tree | ipv4-policy | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
name string
Description | Name of the IPv4 classifier policy. | |
Context | qos classifiers multifield ipv4-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
entry sequence-id number
Description | List of classifier rules. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number | |
Tree | entry | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
sequence-id number
Description | A number to indicate the relative evaluation order of the different entries; lower numbered entries are evaluated before higher numbered entries | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number | |
Range | 1 to 65535 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
action
Description | Container for the actions to be applied to packets matching the classifier entry. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number action | |
Tree | action | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
drop-probability keyword
Description | Assign matching packets to the specified drop probability level The implicit default, if not specified, is low drop-probability. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number action drop-probability keyword | |
Tree | drop-probability | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
forwarding-class (keyword | reference)
Description | The forwarding class to which the DSCP value is mapped | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number action forwarding-class (keyword | reference) | |
Tree | forwarding-class | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
rewrite
Description | Rewrite actions associated with packets that match the classifier entry. Where a packet matches these criteria, the specified rewrite actions should be performed. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number action rewrite | |
Tree | rewrite | |
Configurable | True | |
Platforms | Supported on all platforms except 7250 |
set-dscp number
Description | Sets the 6-bit DSCP (differentiated services code point) value in the IP packet header. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number action rewrite set-dscp number | |
Tree | set-dscp | |
Range | 0 to 63 | |
Configurable | True | |
Platforms | Supported on all platforms except 7250 |
match
Description | Container for the conditions that determine whether a packet matches this entry | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match | |
Tree | match | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
destination-ip
Description | Packet matching criteria based on destination IPv4 address | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-ip | |
Tree | destination-ip | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
address string
Description | Match a packet if its destination IP address logically anded with the inverse of the mask equals this IP address. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-ip address string | |
Tree | address | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
mask string
Description | Match a packet if its destination IP address logically anded with the inverse of this mask equals the configured IP address. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-ip mask string | |
Tree | mask | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
prefix string
Description | Match a packet if its destination IP address is within the specified IPv4 prefix. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-ip prefix string | |
Tree | prefix | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
destination-port
Description | A packet matches this condition if its destination TCP or UDP port number matches the value or range that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port | |
Tree | destination-port | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
operator keyword
Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port operator keyword | |
Tree | operator | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
range
Description | Container used to specify a contiguous range of TCP/UDP port numbers | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port range | |
Tree | range | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
end (number | keyword)
Description | The ending port number to include in the range | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port range end (number | keyword) | |
Tree | end | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
start (number | keyword)
Description | The starting port number to include in the range | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port range start (number | keyword) | |
Tree | start | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
value (number | keyword)
Description | A destination port number | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match destination-port value (number | keyword) | |
Tree | value | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
dscp-set (number | keyword)
Description | A list of DSCP values to be matched for incoming packets. An OR match should be performed, such that a packet must match one of the values defined in this list. If the field is left empty then any DSCP value matches. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match dscp-set (number | keyword) | |
Tree | dscp-set | |
Range | 0 to 63 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D1, 7220 IXR-D2, 7250 IXR-6 |
first-fragment boolean
Description | Match the first fragment of an IPv4 datagram A packet matches the true condition if the IPv4 header indicates that the fragment-offset is zero and and the more-fragments bit is 1. It is not valid to configure this leaf without configuring a match value for the fragment leaf. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match first-fragment boolean | |
Tree | first-fragment | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
fragment boolean
Description | Match an IPv4 fragment A packet matches the true condition if the IPv4 header indicates that the fragment-offset is zero and and the more-fragments bit is 1 or if the IPv4 header indicates that the fragment-offset is greater than 0. A packet matches the false condition if it is unfragmented. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match fragment boolean | |
Tree | fragment | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
icmp
Description | A packet matches this condition if its ICMP type and code matches one of the specified combinations The rule should also have a condition that the IP protocol equals 1 (ICMP) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match icmp | |
Tree | icmp | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
code number
Description | Match if the ICMP code value is any value in the list Requires ICMP type to be specified because codes are type dependent. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match icmp code number | |
Tree | code | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
type (number | keyword)
Description | Match a single ICMP type value. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match icmp type (number | keyword) | |
Tree | type | |
Range | 0 to 255 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
protocol (number | keyword)
Description | An IPv4 packet matches this condition if its IP protocol type field matches the specified value | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match protocol (number | keyword) | |
Tree | protocol | |
Range | 0 to 255 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
source-ip
Description | Packet matching criteria based on source IPv4 address | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-ip | |
Tree | source-ip | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
address string
Description | Match a packet if its source IP address logically anded with the inverse of the mask equals this IP address. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-ip address string | |
Tree | address | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
mask string
Description | Match a packet if its source IP address logically anded with the inverse of this mask equals the configured IP address. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-ip mask string | |
Tree | mask | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
prefix string
Description | Match a packet if its source IP address is within the specified IPv4 prefix. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-ip prefix string | |
Tree | prefix | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
source-port
Description | A packet matches this condition if its source TCP or UDP port number matches the value or range that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port | |
Tree | source-port | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
operator keyword
Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port operator keyword | |
Tree | operator | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
range
Description | Container used to specify a contiguous range of TCP/UDP port numbers | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port range | |
Tree | range | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
end (number | keyword)
Description | The ending port number to include in the range | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port range end (number | keyword) | |
Tree | end | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
start (number | keyword)
Description | The starting port number to include in the range | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port range start (number | keyword) | |
Tree | start | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
value (number | keyword)
Description | A source port number | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match source-port value (number | keyword) | |
Tree | value | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
tcp-flags string
Description | A logical expression using the &, | and ! logical operators and the TCP flag names: rst, syn and ack. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number match tcp-flags string | |
Tree | tcp-flags | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
tcam-entries
Description | Information about the TCAM entries used to implement the ACL entry | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries | |
Tree | tcam-entries | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
forwarding-complex complex-identifier string
Description | List of forwarding complexes in the system | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
Tree | forwarding-complex | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
complex-identifier string
Description | A forwarding complex in the format (slot-number,complex-number). | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
input-total number
Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to ingress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then input-total=2. If the entry is not applied to ingress traffic on any subinterfaces of this complex then input-total=0. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string input-total number | |
Tree | input-total | |
Configurable | False | |
Platforms | Supported on all platforms |
output-total number
Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to egress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then output-total=10. If the entry is not applied to egress traffic on any subinterfaces of this complex then output-total=0. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string output-total number | |
Tree | output-total | |
Configurable | False | |
Platforms | Supported on all platforms |
single-instance number
Description | The number of TCAM entries required to implement this entry if it is applied to only one subinterface and one traffic direction specific to this slot. This is non-zero even if the filter is not applied to any subinterfaces of this complex. It captures the effect of TCAM entry expansion to deal with L4 port or VLAN ranges, for example. | |
Context | qos classifiers multifield ipv4-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string single-instance number | |
Tree | single-instance | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
ipv6-policy name string
Description | List of IPv6 classifier policies | |
Context | qos classifiers multifield ipv6-policy name string | |
Tree | ipv6-policy | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
name string
Description | Name of the IPv6 classifier policy. | |
Context | qos classifiers multifield ipv6-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
entry sequence-id number
Description | List of classifier rules. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number | |
Tree | entry | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
sequence-id number
Description | A number to indicate the relative evaluation order of the different entries; lower numbered entries are evaluated before higher numbered entries | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number | |
Range | 1 to 65535 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
action
Description | Container for the actions to be applied to packets matching the classifier entry. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number action | |
Tree | action | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
drop-probability keyword
Description | Assign matching packets to the specified drop probability level The implicit default, if not specified, is low drop-probability. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number action drop-probability keyword | |
Tree | drop-probability | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
forwarding-class (keyword | reference)
Description | The forwarding class to which the DSCP value is mapped | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number action forwarding-class (keyword | reference) | |
Tree | forwarding-class | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
rewrite
Description | Rewrite actions associated with packets that match the classifier entry. Where a packet matches these criteria, the specified rewrite actions should be performed. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number action rewrite | |
Tree | rewrite | |
Configurable | True | |
Platforms | Supported on all platforms except 7250 |
set-dscp number
Description | Sets the 6-bit DSCP (differentiated services code point) value in the IP packet header. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number action rewrite set-dscp number | |
Tree | set-dscp | |
Range | 0 to 63 | |
Configurable | True | |
Platforms | Supported on all platforms except 7250 |
match
Description | Container for the conditions that determine whether a packet matches this entry | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match | |
Tree | match | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
destination-ip
Description | Packet matching criteria based on destination IPv6 address | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-ip | |
Tree | destination-ip | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
address string
Description | Match a packet if its destination IP address logically anded with the inverse of the mask equals this IP address. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-ip address string | |
Tree | address | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
mask string
Description | Match a packet if its destination IP address logically anded with the inverse of this mask equals the configured IP address. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-ip mask string | |
Tree | mask | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
prefix string
Description | Match a packet if its destination IP address is within the specified IPv6 prefix. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-ip prefix string | |
Tree | prefix | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
destination-port
Description | A packet matches this condition if its destination TCP or UDP port number matches the value or range that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port | |
Tree | destination-port | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
operator keyword
Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port operator keyword | |
Tree | operator | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
range
Description | Container used to specify a contiguous range of TCP/UDP port numbers | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port range | |
Tree | range | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
end (number | keyword)
Description | The ending port number to include in the range | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port range end (number | keyword) | |
Tree | end | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
start (number | keyword)
Description | The starting port number to include in the range | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port range start (number | keyword) | |
Tree | start | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
value (number | keyword)
Description | A destination port number | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match destination-port value (number | keyword) | |
Tree | value | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
dscp-set (number | keyword)
Description | A list of DSCP values to be matched for incoming packets. An OR match should be performed, such that a packet must match one of the values defined in this list. If the field is left empty then any DSCP value matches. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match dscp-set (number | keyword) | |
Tree | dscp-set | |
Range | 0 to 63 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D1, 7220 IXR-D2, 7250 IXR-6 |
icmp6
Description | A packet matches this condition if its ICMPv6 type and code matches one of the specified combinations The rule should also have a condition that the next-header value equals 58 (ICMPv6) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match icmp6 | |
Tree | icmp6 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
code number
Description | Match if the ICMPv6 code value is any value in the list Requires ICMPv6 type to be specified because codes are type dependent. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match icmp6 code number | |
Tree | code | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
type (number | keyword)
Description | Match a single ICMPv6 type value | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match icmp6 type (number | keyword) | |
Tree | type | |
Range | 0 to 255 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
next-header (number | keyword)
Description | An IPv6 packet matches this condition if its first next-header field (in the IPv6 fixed header) contains the specified value | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match next-header (number | keyword) | |
Tree | next-header | |
Range | 0 to 255 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
source-ip
Description | Packet matching criteria based on source IPv6 address | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-ip | |
Tree | source-ip | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
address string
Description | Match a packet if its source IP address logically anded with the inverse of the mask equals this IP address. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-ip address string | |
Tree | address | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
mask string
Description | Match a packet if its source IP address logically anded with the inverse of this mask equals the configured IP address. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-ip mask string | |
Tree | mask | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
prefix string
Description | Match a packet if its source IP address is within the specified IPv6 prefix. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-ip prefix string | |
Tree | prefix | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
source-port
Description | A packet matches this condition if its source TCP or UDP port number matches the value or range that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port | |
Tree | source-port | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
operator keyword
Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port operator keyword | |
Tree | operator | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
range
Description | Container used to specify a contiguous range of TCP/UDP port numbers | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port range | |
Tree | range | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
end (number | keyword)
Description | The ending port number to include in the range | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port range end (number | keyword) | |
Tree | end | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
start (number | keyword)
Description | The starting port number to include in the range | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port range start (number | keyword) | |
Tree | start | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
value (number | keyword)
Description | A source port number | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match source-port value (number | keyword) | |
Tree | value | |
Range | 0 to 65535 | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
tcp-flags string
Description | A logical expression using the &, | and ! logical operators and the TCP flag names: rst, syn and ack. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number match tcp-flags string | |
Tree | tcp-flags | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
tcam-entries
Description | Information about the TCAM entries used to implement the ACL entry | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries | |
Tree | tcam-entries | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
forwarding-complex complex-identifier string
Description | List of forwarding complexes in the system | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
Tree | forwarding-complex | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
complex-identifier string
Description | A forwarding complex in the format (slot-number,complex-number). | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
input-total number
Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to ingress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then input-total=2. If the entry is not applied to ingress traffic on any subinterfaces of this complex then input-total=0. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string input-total number | |
Tree | input-total | |
Configurable | False | |
Platforms | Supported on all platforms |
output-total number
Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to egress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then output-total=10. If the entry is not applied to egress traffic on any subinterfaces of this complex then output-total=0. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string output-total number | |
Tree | output-total | |
Configurable | False | |
Platforms | Supported on all platforms |
single-instance number
Description | The number of TCAM entries required to implement this entry if it is applied to only one subinterface and one traffic direction specific to this slot. This is non-zero even if the filter is not applied to any subinterfaces of this complex. It captures the effect of TCAM entry expansion to deal with L4 port or VLAN ranges, for example. | |
Context | qos classifiers multifield ipv6-policy name string entry sequence-id number tcam-entries forwarding-complex complex-identifier string single-instance number | |
Tree | single-instance | |
Configurable | False | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7220 IXR-D3L, 7220 IXR-D2L, 7250 IXR-10, 7220 IXR-D3, 7220 IXR-D2, 7250 IXR-6 |
vxlan-default reference
Description | Reference to the name of a DSCP mapping policy that applies to terminating VXLAN packets. | |
Context | qos classifiers vxlan-default reference | |
Tree | vxlan-default | |
Reference | qos classifiers dscp-policy name string | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
explicit-congestion-notification
Description | Enable the explicit-congestion-notification context | |
Context | qos explicit-congestion-notification | |
Tree | explicit-congestion-notification | |
Configurable | True | |
Platforms | Supported on all platforms |
ecn-dscp-policy reference
Description | Reference to the DSCP rewrite policy to use when DSCP rewrite is required as a side effect of ECN remarking. This is required configuration in order to globally enable ECN on J2 platforms. | |
Context | qos explicit-congestion-notification ecn-dscp-policy reference | |
Tree | ecn-dscp-policy | |
Reference | qos rewrite-rules dscp-policy name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
forwarding-classes
Description | Enclosing container for list of user-defined forwarding class names | |
Context | qos forwarding-classes | |
Tree | forwarding-classes | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
forwarding-class name string
Description | Enter the forwarding-class list instance | |
Context | qos forwarding-classes forwarding-class name string | |
Tree | forwarding-class | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
name string
Description | User-defined name of the forwarding class The following forwarding-class names are the system-reserved default FC names on 7250 IXR systems: fc0, fc1, fc2, fc3, fc4, fc5, fc6, and fc7. | |
Context | qos forwarding-classes forwarding-class name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
forwarding-class-index number
Description | Associates the forwarding class name with an index representing the forwarding-class-index. Forwarding classes with a higher forwarding-class-index are generally (subject to scheduler configuration) serviced more preferentially than forwarding classes with a lower forwarding-class-index. For the system-reserved default forwarding classes: fc0 -> forwarding-class-index = 0 fc1 -> forwarding-class-index = 1 fc2 -> forwarding-class-index = 2 fc3 -> forwarding-class-index = 3 fc4 -> forwarding-class-index = 4 fc5 -> forwarding-class-index = 5 fc6 -> forwarding-class-index = 6 fc7 -> forwarding-class-index = 7 fc8 -> forwarding-class-index = 8 fc9 -> forwarding-class-index = 9 fc10 -> forwarding-class-index = 10 fc11 -> forwarding-class-index = 11 fc12 -> forwarding-class-index = 12 fc13 -> forwarding-class-index = 13 fc14 -> forwarding-class-index = 14 fc15 -> forwarding-class-index = 15 | |
Context | qos forwarding-classes forwarding-class name string forwarding-class-index number | |
Tree | forwarding-class-index | |
Range | 0 to 15 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
output
Description | Enter the output context | |
Context | qos forwarding-classes forwarding-class name string output | |
Tree | output | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
multicast-queue reference
Description | Output queue for multicast packets within this forwarding class. | |
Context | qos forwarding-classes forwarding-class name string output multicast-queue reference | |
Tree | multicast-queue | |
Reference | qos queues queue name string | |
Configurable | True | |
Platforms | Supported on all platforms |
unicast-queue reference
Description | Output queue for unicast packets within this forwarding class For the system-reserved default forwarding classes: fc0 -> unicast-queue = unicast-queue0 fc1 -> unicast-queue = unicast-queue1 fc2 -> unicast-queue = unicast-queue2 fc3 -> unicast-queue = unicast-queue3 fc4 -> unicast-queue = unicast-queue4 fc5 -> unicast-queue = unicast-queue5 fc6 -> unicast-queue = unicast-queue6 fc7 -> unicast-queue = unicast-queue7 | |
Context | qos forwarding-classes forwarding-class name string output unicast-queue reference | |
Tree | unicast-queue | |
Reference | qos queues queue name string | |
Configurable | True | |
Platforms | Supported on all platforms |
policer-templates
Description | Enter the policer-templates context | |
Context | qos policer-templates | |
Tree | policer-templates | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
policer-template name string
Description | List of policer templates. | |
Context | qos policer-templates policer-template name string | |
Tree | policer-template | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
name string
Description | The name assigned to the policer template. | |
Context | qos policer-templates policer-template name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
policer sequence-id number
Description | The list of policer instances belonging to the template definition. | |
Context | qos policer-templates policer-template name string policer sequence-id number | |
Tree | policer | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 | |
Max. Elements | 32 |
sequence-id number
Description | A number to indicate the relative evaluation order of the different policers in a template; policers with lower sequence-id numbers are evaluated before policers with higher sequence-id numbers | |
Context | qos policer-templates policer-template name string policer sequence-id number | |
Range | 1 to 65535 | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
committed-burst-size number
Description | Maximum CIR bucket depth in bytes On 7220-D2/D3 the lower limit is 512 Bytes and higher limit is 268 MB | |
Context | qos policer-templates policer-template name string policer sequence-id number committed-burst-size number | |
Tree | committed-burst-size | |
Units | bytes | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
committed-rate-kbps number
Description | The committed information rate (CIR) of the policer, defined in kilobits (1024 bits) per second On 7220-D2/D3 the minimum rate is 8 Kbps | |
Context | qos policer-templates policer-template name string policer sequence-id number committed-rate-kbps number | |
Tree | committed-rate-kbps | |
Units | kbps | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
exceed-action
Description | Container with options that specify the handling of packets that the policer has determined are exceeding (yellow) | |
Context | qos policer-templates policer-template name string policer sequence-id number exceed-action | |
Tree | exceed-action | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
drop-probability keyword
Description | Recolor exceeding packets to the specified drop-probability level | |
Context | qos policer-templates policer-template name string policer sequence-id number exceed-action drop-probability keyword | |
Tree | drop-probability | |
Default | medium | |
Options |
| |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
forwarding-class fc (reference | keyword)
Description | The list of forwarding classes with traffic to be sent to the policer. If this list is not configured then all subinterface traffic is matched. | |
Context | qos policer-templates policer-template name string policer sequence-id number forwarding-class fc (reference | keyword) | |
Tree | forwarding-class | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
fc (reference | keyword)
Description | A forwarding class that has traffic to match to the policer | |
Context | qos policer-templates policer-template name string policer sequence-id number forwarding-class fc (reference | keyword) | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
forwarding-type keyword
Description | The list of forwarding types, belonging to this forwarding-class, to match to the policer. If none are specified, this implies ALL forwarding types. | |
Context | qos policer-templates policer-template name string policer sequence-id number forwarding-class fc (reference | keyword) forwarding-type keyword | |
Tree | forwarding-type | |
Options |
| |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 | |
Max. Elements | 5 |
maximum-burst-size number
Description | Maximum PIR bucket depth in bytes On 7220-D2/D3 the lower limit is 512 Bytes and higher limit is 268 MB | |
Context | qos policer-templates policer-template name string policer sequence-id number maximum-burst-size number | |
Tree | maximum-burst-size | |
Units | bytes | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
peak-rate-kbps number
Description | The peak information rate (PIR) of the policer, defined in kilobits (1024 bits) per second. On 7220-D2/D3 the minimum rate is 8 Kbps | |
Context | qos policer-templates policer-template name string policer sequence-id number peak-rate-kbps number | |
Tree | peak-rate-kbps | |
Units | kbps | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
violate-action
Description | Container with options that specify the handling of packets that the policer has determined are violating (red) | |
Context | qos policer-templates policer-template name string policer sequence-id number violate-action | |
Tree | violate-action | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
drop
Description | Violating packets should be dropped immediately | |
Context | qos policer-templates policer-template name string policer sequence-id number violate-action drop | |
Tree | drop | |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
drop-probability keyword
Description | Recolor violating packets to the specified drop-probability level | |
Context | qos policer-templates policer-template name string policer sequence-id number violate-action drop-probability keyword | |
Tree | drop-probability | |
Default | high | |
Options |
| |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
statistics-mode keyword
Description | The statistics mode of all policers belonging to this template | |
Context | qos policer-templates policer-template name string statistics-mode keyword | |
Tree | statistics-mode | |
Default | violating-focus | |
Options |
| |
Configurable | True | |
Platforms | 7220 IXR-D3L, 7220 IXR-D2L, 7220 IXR-D5, 7220 IXR-D4, 7220 IXR-D3, 7220 IXR-D2 |
preserve-dscp boolean
Description | When forwarding an untunneled IP packet or decapsulating an IP-in-IP packet, preserve the received DSCP and use it in the transmitted packet. This should not be enabled unless all IP packets have been classified by a multi-field classifier policy | |
Context | qos preserve-dscp boolean | |
Tree | preserve-dscp | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e |
queue-templates
Description | Enter the queue-templates context | |
Context | qos queue-templates | |
Tree | queue-templates | |
Configurable | True | |
Platforms | Supported on all platforms |
queue-template name string
Description | List of queue templates that can be applied to egress queues or VOQ sets 7250 IXR-6/10 supports a maximum 8 queue-templates. 7220-D2/D3/D5/H2/H3 supports a maximum of 64 queue-templates. | |
Context | qos queue-templates queue-template name string | |
Tree | queue-template | |
Configurable | True | |
Platforms | Supported on all platforms | |
Max. Elements | 64 |
name string
Description | The name of the queue template The queue template with the special name 'default' is used when a queue-template reference is missing. | |
Context | qos queue-templates queue-template name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | Supported on all platforms |
active-queue-management
Description | Enable the active-queue-management context | |
Context | qos queue-templates queue-template name string active-queue-management | |
Tree | active-queue-management | |
Configurable | True | |
Platforms | Supported on all platforms |
ecn-slope ecn-drop-probability keyword
Description | List of ECN slopes. | |
Context | qos queue-templates queue-template name string active-queue-management ecn-slope ecn-drop-probability keyword | |
Tree | ecn-slope | |
Configurable | True | |
Platforms | Supported on all platforms |
ecn-drop-probability keyword
Description | The drop probability to which the ECN slope applies. | |
Context | qos queue-templates queue-template name string active-queue-management ecn-slope ecn-drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
max-probability number
Description | The maximum probability of marking a packet (at or above the max-threshold). On 7220-D2/D3/D5/H2/H3 max-probability has a limited set of discrete values: 1,2,3,4,5,6,7,8,9,10,25,50,75,100. The user is allowed to enter any value but the system will choose the next-highest value that is supported. A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0. | |
Context | qos queue-templates queue-template name string active-queue-management ecn-slope ecn-drop-probability keyword max-probability number | |
Tree | max-probability | |
Range | 0 to 100 | |
Default | 0 | |
Configurable | True | |
Platforms | Supported on all platforms |
max-threshold-percent number
Description | The percentage of the MBS that corresponds to the ECN maximum threshold parameter. A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0. | |
Context | qos queue-templates queue-template name string active-queue-management ecn-slope ecn-drop-probability keyword max-threshold-percent number | |
Tree | max-threshold-percent | |
Range | 0 to 100 | |
Default | 100 | |
Configurable | True | |
Platforms | Supported on all platforms |
min-threshold-percent number
Description | The percentage of the MBS that corresponds to the ECN mininum threshold parameter. A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0. | |
Context | qos queue-templates queue-template name string active-queue-management ecn-slope ecn-drop-probability keyword min-threshold-percent number | |
Tree | min-threshold-percent | |
Range | 0 to 100 | |
Default | 100 | |
Configurable | True | |
Platforms | Supported on all platforms |
weight-factor number
Description | Weight factor to use in the calculation of the current (average weighted) queue depth. | |
Context | qos queue-templates queue-template name string active-queue-management weight-factor number | |
Tree | weight-factor | |
Range | 0 to 15 | |
Default | 0 | |
Configurable | True | |
Platforms | Supported on all platforms |
wred-slope traffic-type keyword drop-probability keyword
Description | List of WRED slopes. | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
Tree | wred-slope | |
Configurable | True | |
Platforms | Supported on all platforms |
traffic-type keyword
Description | The traffic type to which the WRED slope applies. | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
drop-probability keyword
Description | The drop probability to which the WRED slope applies. | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
max-probability number
Description | The maximum probability of dropping a packet (at or above the max-threshold). A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0 | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword max-probability number | |
Tree | max-probability | |
Range | 0 to 100 | |
Default | 0 | |
Configurable | True | |
Platforms | Supported on all platforms |
max-threshold-percent number
Description | The percentage of the MBS that corresponds to the WRED maximum threshold parameter. A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0 | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword max-threshold-percent number | |
Tree | max-threshold-percent | |
Range | 0 to 100 | |
Default | 100 | |
Configurable | True | |
Platforms | Supported on all platforms |
min-threshold-percent number
Description | The percentage of the MBS that corresponds to the WRED mininum threshold parameter. A slope is disabled by setting min-threshold-percent=100, max-threshold-percent=100 and max-probability=0 | |
Context | qos queue-templates queue-template name string active-queue-management wred-slope traffic-type keyword drop-probability keyword min-threshold-percent number | |
Tree | min-threshold-percent | |
Range | 0 to 100 | |
Default | 100 | |
Configurable | True | |
Platforms | Supported on all platforms |
queue-depth
Description | Enter the queue-depth context | |
Context | qos queue-templates queue-template name string queue-depth | |
Tree | queue-depth | |
Configurable | True | |
Platforms | Supported on all platforms |
high-threshold-bytes number
Description | The queue depth that, when crossed in a rising direction, triggers a hardware interrupt and a recording of the current system time. The default value of 0 disables the functionality. On IXR-6/10 this parameter applies to a set of VOQs (and therefore to unicast traffic only). On 7220-D2/D3/H2/H3 this parameter applies to a unicast queue only; the configuration of this leaf is ignored when the queue-template is attached to a queue with queue-type other than unicast. On 7220-D2/D3 the threshold is rounded up the nearest multiple of 2048 bytes. On IXR-6/10 the threshold is rounded up to the nearest multiple of 4096 bytes. On 7220-H2/H3 the threshold is rounded up to the nearest multiple of 254 bytes. | |
Context | qos queue-templates queue-template name string queue-depth high-threshold-bytes number | |
Tree | high-threshold-bytes | |
Default | 0 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D5 |
maximum-burst-size number
Description | Maximum amount of shared buffer memory available to the queue. On IXR-6/10 this parameter applies to a set of VOQs. If the configured value is 0 or no value is configured the limit is 256 MB (268435456 bytes), however the use of 'alpha' may limit the effective value to less than 256 MB. A configured non-zero value sets a static limit without 'alpha'. On 7220-D2/D3/D5/H2/H3 this parameter applies to an egress queue and the default value of zero instructs the forwarding chip to apply its own limit based on 'alpha'. A non-zero value disables 'alpha'. The alpha value is 5 (0.25 multiplier of shared buffer space) for unicast queues and 4 (0.125 multiplier of shared buffer space) for multicast queues. Must be non-zero/non-default in order to add the active-queue-management presence container. | |
Context | qos queue-templates queue-template name string queue-depth maximum-burst-size number | |
Tree | maximum-burst-size | |
Default | 0 | |
Units | bytes | |
Configurable | True | |
Platforms | Supported on all platforms |
queues
Description | Enclosing container for the list of user-defined queue names | |
Context | qos queues | |
Tree | queues | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
queue name string
Description | List of user-defined queues | |
Context | qos queues queue name string | |
Tree | queue | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
name string
Description | User-defined name of the queue The following queue names are the system-reserved default queue names on 7250 IXR systems: unicast-0, unicast-1, unicast-2, unicast-3, unicast-4, unicast-5, unicast-6, and unicast-7. | |
Context | qos queues queue name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
rewrite-rules
Description | Enter the rewrite-rules context | |
Context | qos rewrite-rules | |
Tree | rewrite-rules | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
dot1p-policy name string
Description | Enter the dot1p-policy list instance | |
Context | qos rewrite-rules dot1p-policy name string | |
Tree | dot1p-policy | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
name string
Description | User-configured name for an 802.1p priorty code point rewrite policy. | |
Context | qos rewrite-rules dot1p-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
map forwarding-class (reference | keyword)
Description | Enter the map list instance | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) | |
Tree | map | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
forwarding-class (reference | keyword)
Description | The forwarding class name | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D2, 7220 IXR-D2L |
dot1p number
Description | The dot1p marking to be used for all packets associated with the FC, except those with a drop-probability-specific or profile-specific override. | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) dot1p number | |
Tree | dot1p | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | Supported on all platforms |
drop-probability drop-probability keyword
Description | Enter the drop-probability list instance | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Tree | drop-probability | |
Configurable | True | |
Platforms | Supported on all platforms |
drop-probability keyword
Description | A drop probability level within the FC for which a different remarking is desired. | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
dot1p number
Description | The dot1p marking to be used for this specific drop-probability | |
Context | qos rewrite-rules dot1p-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword dot1p number | |
Tree | dot1p | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | Supported on all platforms |
dscp-policy name string
Description | Enter the dscp-policy list instance | |
Context | qos rewrite-rules dscp-policy name string | |
Tree | dscp-policy | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
name string
Description | User-configured name for a DSCP rewrite policy. | |
Context | qos rewrite-rules dscp-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
map forwarding-class (reference | keyword)
Description | Enter the map list instance | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) | |
Tree | map | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
forwarding-class (reference | keyword)
Description | The forwarding class name | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
drop-probability drop-probability keyword
Description | Enter the drop-probability list instance | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Tree | drop-probability | |
Configurable | True | |
Platforms | Supported on all platforms |
drop-probability keyword
Description | A drop probability level within the FC for which a different remarking is desired. | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
dscp (number | keyword)
Description | The DSCP marking to be used for this specific drop-probability | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword dscp (number | keyword) | |
Tree | dscp | |
Range | 0 to 63 | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
dscp (number | keyword)
Description | The DSCP marking to be used for all packets associated with the FC, except those with a drop-probability-specific or profile-specific override. | |
Context | qos rewrite-rules dscp-policy name string map forwarding-class (reference | keyword) dscp (number | keyword) | |
Tree | dscp | |
Range | 0 to 63 | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms except 7220 IXR-D1 |
mpls-traffic-class-policy name string
Description | Enter the mpls-traffic-class-policy list instance | |
Context | qos rewrite-rules mpls-traffic-class-policy name string | |
Tree | mpls-traffic-class-policy | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
name string
Description | User-configured name for an MPLS traffic-class rewrite policy. | |
Context | qos rewrite-rules mpls-traffic-class-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
map forwarding-class (reference | keyword)
Description | Enter the map list instance | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) | |
Tree | map | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
forwarding-class (reference | keyword)
Description | The forwarding class name | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) | |
Options |
| |
Reference | qos forwarding-classes forwarding-class name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
drop-probability drop-probability keyword
Description | Enter the drop-probability list instance | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Tree | drop-probability | |
Configurable | True | |
Platforms | Supported on all platforms |
drop-probability keyword
Description | A drop probability level within the FC for which a different remarking is desired. | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword | |
Options |
| |
Configurable | True | |
Platforms | Supported on all platforms |
traffic-class number
Description | The MPLS traffic class marking to be used for this specific drop-probability | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) drop-probability drop-probability keyword traffic-class number | |
Tree | traffic-class | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | Supported on all platforms |
traffic-class number
Description | The MPLS traffic class marking to be used for all packets associated with the FC, except those with a drop-probability-specific or profile-specific override. | |
Context | qos rewrite-rules mpls-traffic-class-policy name string map forwarding-class (reference | keyword) traffic-class number | |
Tree | traffic-class | |
Range | 0 to 7 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
vxlan-outer-header-dscp-policy reference
Description | Reference to the name of a DSCP rewrite policy that applies to the outer IP header of originating VXLAN packets. | |
Context | qos rewrite-rules vxlan-outer-header-dscp-policy reference | |
Tree | vxlan-outer-header-dscp-policy | |
Reference | qos rewrite-rules dscp-policy name string | |
Configurable | True | |
Platforms | 7220 IXR-D4, 7220 IXR-D5 |
scheduler-policies
Description | Container for the list of configured scheduler policies. | |
Context | qos scheduler-policies | |
Tree | scheduler-policies | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
scheduler-policy name string
Description | List of scheduler policies. A scheduler policy is a set of schedulers that are to be applied together. Each scheduler within a scheduler policy takes an input, and outputs it according to a scheduling discipline that is specified within it. | |
Context | qos scheduler-policies scheduler-policy name string | |
Tree | scheduler-policy | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
name string
Description | Name for the scheduler policy. | |
Context | qos scheduler-policies scheduler-policy name string | |
String Length | 1 to 255 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
scheduler sequence number
Description | List of defined QoS traffic schedulers. | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number | |
Tree | scheduler | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
sequence number
Description | Sequence number for the scheduler within the scheduler policy. Schedulers are processed from lowest sequence to highest. | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number | |
Range | 0 to 2 | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
input id string
Description | List of input sources for the scheduler. | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number input id string | |
Tree | input | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
id string
Description | User-defined identifier for the scheduler input | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number input id string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
queue (reference | keyword)
Description | The queue that is the input to the scheduler | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number input id string queue (reference | keyword) | |
Tree | queue | |
Options |
| |
Reference | qos queues queue name string | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
weight number
Description | For weighted round-robin schedulers, this leaf indicates the weight of the corresponding input. | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number input id string weight number | |
Tree | weight | |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |
priority keyword
Description | Priority of the scheduler within the scheduler policy. | |
Context | qos scheduler-policies scheduler-policy name string scheduler sequence number priority keyword | |
Tree | priority | |
Options |
| |
Configurable | True | |
Platforms | 7250 IXR-10e, 7250 IXR-6e, 7250 IXR-10, 7250 IXR-6 |