oam

oam
+  ethcfm
   -  cfm-stack-table
      -  interface
         -  interface interface string level number direction keyword 
            -  association-id string
            -  defects keyword
            -  domain-id string
            -  mac-address string
            -  mep-id number
      -  subinterface
         -  subinterface subinterface string primary-vlan (number | keyword) level number direction keyword 
            -  association-id string
            -  defects keyword
            -  domain-id string
            -  mac-address string
            -  mep-id number
            -  subinterface-type string
   +  domain domain-id string 
      +  association association-id string 
         -  association-auto-discovered-meps mep-id number 
         +  association-format keyword
         +  association-meps mep-id number 
         +  ccm-hold-time
            +  delay-timeout number
         +  ccm-interval keyword
         +  ma-name
            +  icc-value string
            +  id string
            +  name string
            +  number number
            +  vid number
         +  mep mep-id reference 
            +  admin-state keyword
            +  ccm-ltm-priority number
            +  continuity-check
               -  active-defects keyword
               +  ccm-local-fault
                  +  action keyword
               -  ccm-sequence-error-count number
               +  ccm-transmit keyword
               -  highest-priority-defect-found keyword
               -  last-cross-connect-ccm binary
               -  last-error-ccm binary
               +  lowest-fault-priority-defect keyword
               -  sent-interface-status keyword
               -  sent-port-status keyword
               -  sent-remote-defect-indicator boolean
            +  direction keyword
            +  interface-ref
               +  interface reference
               +  subinterface reference
            -  linktrace
               -  latest-run
                  -  destination-mac-address string
                  -  end-time string
                  -  priority number
                  -  remote-mep-id number
                  -  reply reply-order number 
                     -  chassis-id (mac-address | string | binary)
                     -  chassis-id-subtype (number | keyword)
                     -  egress-action keyword
                     -  egress-mac string
                     -  egress-port-id
                        -  port-id-subtype keyword
                        -  value (mac-address | string | binary)
                     -  forwarded boolean
                     -  ingress-action keyword
                     -  ingress-mac string
                     -  ingress-port-id
                        -  port-id-subtype keyword
                        -  value (mac-address | string | binary)
                     -  last-egress-identifier
                        -  integer number
                        -  mac-address string
                     -  ltr-relay keyword
                     -  management-address string
                     -  management-address-domain string
                     -  next-egress-identifier
                        -  integer number
                        -  mac-address string
                     -  reply-ttl number
                     -  terminal-mep boolean
                  -  start-time string
                  -  test-status keyword
                  -  transaction-id number
                  -  transmit-ltm-flags bits
                  -  ttl number
               -  next-transaction-number number
               -  status keyword
               -  unexpected-ltr-received number
            -  loopback
               -  multicast-latest-run
                  -  data-length number
                  -  end-time string
                  -  interval keyword
                  -  priority number
                  -  remote-mep-mac remote-mac-address string 
                     -  sequence-number sequence-number number received-index number 
                  -  start-time string
                  -  statistics
                     -  received-packets number
                     -  received-unexpected-sequence-number number
                     -  transmitted-packets number
                  -  test-status keyword
               -  next-sequence-number number
               -  status keyword
               -  unicast-latest-run
                  -  data-length number
                  -  destination-mac-address string
                  -  end-time string
                  -  interval keyword
                  -  priority number
                  -  remote-mep-id number
                  -  sequence-number number
                  -  start-time string
                  -  statistics
                     -  packet-loss decimal-number
                     -  received-bad-msdu number
                     -  received-in-order number
                     -  received-out-of-order number
                     -  received-unexpected-sequence-number number
                     -  sent-packets number
                  -  test-status keyword
            +  mac-address
               +  custom-address string
               +  custom-mac-pool
                  +  index number
                  +  name reference
               +  system-mac-pool-index number
            -  opcode opcode-name keyword 
               -  received number
               -  transmitted number
            -  remote-mep remote-mep-id number 
               -  auto-discovered boolean
               -  chassis-id (mac-address | string | binary)
               -  chassis-id-subtype (number | keyword)
               -  interface-status-tlv keyword
               -  mac-address string
               -  management-address string
               -  management-address-domain string
               -  port-status-tlv keyword
               -  receiving-ccm boolean
               -  remote-defect-indicator boolean
               -  remote-mep-failed-ok-time number
               -  remote-mep-state keyword
         +  network-instance
            +  name reference
         +  remote-mep-auto-discovery
            +  admin-state keyword
            +  aging-timer (number | keyword)
         +  sender-id-permission-type keyword
      +  domain-format keyword
      +  level number
      +  md-name
         +  dns string
         +  mac string
         +  name string
         +  two-octet-int number
   -  learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number 
      -  remote-mac-address string
      -  stale-flag boolean
   +  mac-allocation
      +  custom-mac-pool name string 
         +  count number
         -  highest-index-in-use number
         -  mac-address index number mac-address string 
         +  starting-mac string
      -  interface name string 
         -  forwarding-complex number
         -  linecard number
         -  mep domain-id string association-id string mep-id number 
            -  custom-mac-pool-name string
            -  index number
            -  mac-address string
            -  mac-allocated-type keyword
            -  subinterface string
      +  mode keyword
      -  network-instance name string 
         -  subinterface name string 
            -  mep domain-id string association-id string mep-id number 
               -  custom-mac-pool-name string
               -  duplicate-mac boolean
               -  index number
               -  mac-address string
               -  mac-allocated-type keyword
      -  system-mac-pool
         -  count number
         -  mac-address index number mac-address string 
         -  starting-mac string
   +  sender-id
      +  chassis-local-name string
      +  chassis-type keyword
   -  statistics
      -  error-discards number
      -  opcode opcode-name keyword 
         -  received number
         -  transmitted number
      -  receive-congestion-drops number
      -  receive-count number
      -  transmit-congestion-drops number
      -  transmit-count number
+  ippm
   +  source-udp-port-pools
      +  port port-number number 
         +  application-assignment keyword
         -  in-use boolean
+  link-measurement
   +  interface name string 
      -  aggregate-newest-index number
      -  destination-ip-auto-assigned boolean
      -  detectable-transmit-error keyword
      +  dynamic-measurement
         +  link-measurement-template reference
         +  stamp
            +  ipv4
               +  admin-state keyword
               +  destination-ip string
               +  source-ip string
            +  ipv6
               +  admin-state keyword
               +  destination-ip string
               +  source-ip string
      -  in-use-destination-udp-port number
      -  in-use-source-udp-port number
      +  interface-ref
         +  interface reference
         +  subinterface reference
      -  last-reported-dynamic-delay (number | keyword)
      -  oper-state keyword
      -  operational-destination-address (ipv4-address | ipv6-address)
      -  operational-failure keyword
      -  operational-source-address (ipv4-address | ipv6-address)
      -  report-timestamp string
      -  report-triggered-by keyword
      -  reporting boolean
      -  sample-newest-index number
      -  source-ip-auto-assigned boolean
      -  stamp-session-identifier number
      -  statistics
         -  aggregate-sample-window
            -  index index number 
               -  average number
               -  end-timestamp-utc string
               -  integrity boolean
               -  maximum number
               -  minimum number
               -  result number
               -  sample-window-count number
               -  window-state keyword
         -  sample-window
            -  index index number 
               -  average number
               -  duplicate-packet-count number
               -  end-timestamp-utc string
               -  error-count number
               -  integrity boolean
               -  maximum number
               -  minimum number
               -  received-packets number
               -  result number
               -  stamp-malformed-flag-count number
               -  stamp-unrecognized-flag-count number
               -  transmitted-packets number
               -  window-state keyword
               -  zero-or-negative-delay-count number
   +  measurement-template template-name string 
      +  admin-state keyword
      +  aggregate-sample-window
         +  multiplier number
         +  threshold
            +  absolute number
            +  relative number
         +  window-integrity number
      +  delay keyword
      +  description string
      +  interval number
      +  last-reported-dynamic-delay-hold number
      +  reporting boolean
      +  sample-window
         +  multiplier number
         +  threshold
            +  absolute number
            +  relative number
         +  window-integrity number
      +  stamp
         +  destination-udp-port number
         +  dscp (number | keyword)
         +  forwarding-class reference
         +  ipv6-destination-discovery
            +  admin-state keyword
            +  discovery-interval number
            +  discovery-timer number
            +  update-interval number
         +  pad-tlv-size number
         +  profile keyword
         +  return-path
            +  link boolean
         +  source-udp-port number
         +  ttl number
      +  unidirectional-measurement keyword
-  lsp-ping
   -  ldp
      -  fec prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  sequence sequence-id number 
               -  out-interface string
               -  probe-size number
               -  reply
                  -  mpls-ttl number
                  -  received boolean
                  -  reply-sender (ipv4-address | ipv6-address)
                  -  return-code keyword
                  -  return-subcode number
                  -  round-trip-time number
                  -  udp-data-length number
               -  request-sent boolean
               -  send-failure-reason keyword
            -  statistics
               -  round-trip-time
                  -  average number
                  -  maximum number
                  -  minimum number
                  -  standard-deviation number
            -  test-active boolean
   -  sr-isis
      -  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  sequence sequence-id number 
               -  out-interface string
               -  probe-size number
               -  reply
                  -  mpls-ttl number
                  -  received boolean
                  -  reply-sender (ipv4-address | ipv6-address)
                  -  return-code keyword
                  -  return-subcode number
                  -  round-trip-time number
                  -  udp-data-length number
               -  request-sent boolean
               -  send-failure-reason keyword
            -  statistics
               -  round-trip-time
                  -  average number
                  -  maximum number
                  -  minimum number
                  -  standard-deviation number
            -  test-active boolean
   -  te-policy
      -  sr-uncolored
         -  policy policy-name string protocol-origin keyword 
            -  session-id id number 
               -  path-destination
                  -  ip-address (ipv4-address | ipv6-address)
                  -  next-hop (ipv4-address | ipv6-address)
                  -  subinterface string
               -  sequence sequence-id number 
                  -  out-interface string
                  -  probe-size number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
                  -  request-sent boolean
                  -  send-failure-reason keyword
               -  statistics
                  -  round-trip-time
                     -  average number
                     -  maximum number
                     -  minimum number
                     -  standard-deviation number
               -  test-active boolean
-  lsp-trace
   -  ldp
      -  fec prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  hop hop-index number 
               -  probe probe-index number 
                  -  downstream-detailed-mapping id number 
                     -  address-type keyword
                     -  downstream-interface-address (ipv4-address | ipv6-address)
                     -  downstream-router-address (ipv4-address | ipv6-address)
                     -  mpls-label index number 
                        -  label (number | keyword)
                        -  protocol keyword
                     -  mtu number
                  -  last-probe-send-failure-reason keyword
                  -  probe-size number
                  -  probes-sent number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  test-active boolean
   -  sr-isis
      -  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  hop hop-index number 
               -  probe probe-index number 
                  -  downstream-detailed-mapping id number 
                     -  address-type keyword
                     -  downstream-interface-address (ipv4-address | ipv6-address)
                     -  downstream-router-address (ipv4-address | ipv6-address)
                     -  mpls-label index number 
                        -  label (number | keyword)
                        -  protocol keyword
                     -  mtu number
                  -  last-probe-send-failure-reason keyword
                  -  probe-size number
                  -  probes-sent number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  test-active boolean
   -  te-policy
      -  sr-uncolored
         -  policy policy-name string protocol-origin keyword 
            -  session-id id number 
               -  hop hop-index number 
                  -  probe probe-index number 
                     -  downstream-detailed-mapping id number 
                        -  address-type keyword
                        -  downstream-interface-address (ipv4-address | ipv6-address)
                        -  downstream-router-address (ipv4-address | ipv6-address)
                        -  mpls-label index number 
                           -  label (number | keyword)
                           -  protocol keyword
                        -  mtu number
                     -  last-probe-send-failure-reason keyword
                     -  probe-size number
                     -  probes-sent number
                     -  reply
                        -  mpls-ttl number
                        -  received boolean
                        -  reply-sender (ipv4-address | ipv6-address)
                        -  return-code keyword
                        -  return-subcode number
                        -  round-trip-time number
                        -  udp-data-length number
               -  path-destination
                  -  ip-address (ipv4-address | ipv6-address)
                  -  next-hop (ipv4-address | ipv6-address)
                  -  subinterface string
               -  test-active boolean
+  performance-monitoring
   +  ethcfm
      +  delay
         +  bin-group bin-group-name string 
            +  admin-state keyword
            +  bin-type bin-metric keyword 
               +  bin bin-number number 
                  +  lower-bound number
               +  delay-event direction keyword 
                  +  clear-threshold number
                  +  exclude-lowest-bin number
                  +  lowest-bin number
                  +  raise-threshold number
               +  exclude-from-avg direction keyword 
                  +  bins string
            +  description string
            -  reference-count number
      +  loss
         +  loss-events-template loss-events-template-name string 
            +  avg-flr-event direction keyword 
               +  clear-threshold decimal-number
               +  raise-threshold decimal-number
            +  chli-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  description string
            +  hli-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            -  reference-count number
            +  unavailability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  undetermined-availability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  undetermined-unavailability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
      +  session session-name string 
         +  description string
         +  eth-cfm-single-ended-dmm-test
            +  admin-state keyword
            +  bin-group reference
            -  bin-group-binning keyword
            +  data-tlv-size number
            -  delay-events bin-metric keyword direction keyword 
               -  last-tca-time string
               -  oper-state keyword
            -  detected-tx-error keyword
            +  interval keyword
            -  measurement-result mi-ro-type keyword 
               -  index index number 
                  -  elapsed-time number
                  -  oper-state keyword
                  -  start-time string
                  -  statistics
                     -  bin-type bin-metric keyword 
                        -  backward
                           -  average number
                           -  maximum number
                           -  minimum number
                        -  bin bin-number number 
                           -  backward-measurements number
                           -  forward-measurements number
                           -  round-trip-measurements number
                        -  forward
                           -  average number
                           -  maximum number
                           -  minimum number
                        -  round-trip
                           -  average number
                           -  maximum number
                           -  minimum number
                     -  frames-received number
                     -  frames-transmitted number
                  -  suspect-status boolean
               -  newest-index number
            -  oper-state keyword
            +  test-duration number
            +  test-id (number | keyword)
            -  test-id-in-use number
         +  eth-cfm-single-ended-slm-test
            +  admin-state keyword
            +  data-tlv-size number
            -  detected-tx-error keyword
            +  flr-threshold number
            +  hli-force-count boolean
            +  interval keyword
            +  loss-event reference
            -  loss-events loss-metric keyword direction keyword 
               -  last-tca-time string
               -  oper-state keyword
            -  measurement-result mi-ro-type keyword 
               -  index index number 
                  -  elapsed-time number
                  -  oper-state keyword
                  -  start-time string
                  -  statistics
                     -  backward
                        -  available number
                        -  average-frame-loss-ratio number
                        -  consecutive-high-loss-intervals number
                        -  high-loss-intervals number
                        -  in-loss number
                        -  maximum-frame-loss-ratio number
                        -  minimum-frame-loss-ratio number
                        -  unavailable number
                        -  undetermined-available number
                        -  undetermined-unavailable number
                     -  forward
                        -  available number
                        -  average-frame-loss-ratio number
                        -  consecutive-high-loss-intervals number
                        -  high-loss-intervals number
                        -  maximum-frame-loss-ratio number
                        -  minimum-frame-loss-ratio number
                        -  out-loss number
                        -  unavailable number
                        -  undetermined-available number
                        -  undetermined-unavailable number
                     -  frames-received number
                     -  frames-transmitted number
                  -  suspect-status boolean
               -  newest-index number
            -  oper-state keyword
            +  test-duration number
            +  test-id (number | keyword)
            -  test-id-in-use number
            +  timing
               +  chli-threshold number
               +  consecutive-delta-t number
               +  frames-per-delta-t number
         +  measurement-interval mi-duration keyword 
            +  boundary-type keyword
            +  clock-offset number
            +  intervals-stored number
            +  threshold-alerts
               +  delay-event keyword
               +  loss-event keyword
         +  priority number
         +  session-type keyword
         +  source
            +  association-id reference
            +  domain-id reference
            +  mep-id reference
         +  target (unicast-mac-address | number)
   +  ip
      +  delay
         +  bin-group bin-group-name string 
            +  admin-state keyword
            +  bin-type bin-metric keyword 
               +  bin bin-number number 
                  +  lower-bound number
               +  delay-event direction keyword 
                  +  clear-threshold number
                  +  exclude-lowest-bin number
                  +  lowest-bin number
                  +  raise-threshold number
               +  exclude-from-avg direction keyword 
                  +  bins string
            +  description string
            -  reference-count number
      +  loss
         +  loss-events-template loss-events-template-name string 
            +  avg-flr-event direction keyword 
               +  clear-threshold decimal-number
               +  raise-threshold decimal-number
            +  chli-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  description string
            +  hli-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            -  reference-count number
            +  unavailability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  undetermined-availability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
            +  undetermined-unavailability-event direction keyword 
               +  clear-threshold number
               +  raise-threshold number
      +  session session-name string 
         +  description string
         +  destination-ip (ipv4-address | ipv6-address)
         +  destination-udp-port number
         +  dscp (number | keyword)
         +  forwarding
            +  interface-ref
               +  interface reference
               +  subinterface reference
            +  next-hop (ipv4-address | ipv6-address)
         +  forwarding-class reference
         +  measurement-interval mi-duration keyword 
            +  boundary-type keyword
            +  clock-offset number
            +  intervals-stored number
            +  threshold-alerts
               +  delay-event keyword
               +  loss-event keyword
         +  network-instance reference
         +  profile keyword
         +  session-type keyword
         +  source-ip (ipv4-address | ipv6-address)
         +  source-udp-port number
         -  source-udp-port-in-use number
         +  stamp
            +  admin-state keyword
            +  delay
               +  bin-group reference
               -  bin-group-binning keyword
               -  delay-events bin-metric keyword direction keyword 
                  -  last-tca-time string
                  -  oper-state keyword
               -  measurement-result mi-ro-type keyword 
                  -  index index number 
                     -  elapsed-time number
                     -  oper-state keyword
                     -  start-time string
                     -  statistics
                        -  bin-type bin-metric keyword 
                           -  backward
                              -  average number
                              -  maximum number
                              -  minimum number
                           -  bin bin-number number 
                              -  backward-measurements number
                              -  forward-measurements number
                              -  round-trip-measurements number
                           -  forward
                              -  average number
                              -  maximum number
                              -  minimum number
                           -  round-trip
                              -  average number
                              -  maximum number
                              -  minimum number
                        -  frames-received number
                        -  frames-transmitted number
                     -  suspect-status boolean
                  -  newest-index number
            -  detected-tx-error keyword
            +  interval keyword
            +  loss
               +  flr-threshold number
               +  hli-force-count boolean
               +  loss-event reference
               -  loss-events loss-metric keyword direction keyword 
                  -  last-tca-time string
                  -  oper-state keyword
               -  measurement-result mi-ro-type keyword 
                  -  index index number 
                     -  elapsed-time number
                     -  oper-state keyword
                     -  start-time string
                     -  statistics
                        -  backward
                           -  available number
                           -  average-frame-loss-ratio number
                           -  consecutive-high-loss-intervals number
                           -  high-loss-intervals number
                           -  in-loss number
                           -  maximum-frame-loss-ratio number
                           -  minimum-frame-loss-ratio number
                           -  unavailable number
                           -  undetermined-available number
                           -  undetermined-unavailable number
                        -  forward
                           -  available number
                           -  average-frame-loss-ratio number
                           -  consecutive-high-loss-intervals number
                           -  high-loss-intervals number
                           -  maximum-frame-loss-ratio number
                           -  minimum-frame-loss-ratio number
                           -  out-loss number
                           -  unavailable number
                           -  undetermined-available number
                           -  undetermined-unavailable number
                        -  frames-received number
                        -  frames-transmitted number
                     -  suspect-status boolean
                  -  newest-index number
               +  timing
                  +  chli-threshold number
                  +  consecutive-delta-t number
                  +  frames-per-delta-t number
            -  oper-state keyword
            +  pad-tlv-size number
            -  stamp-session-identifier number
            -  statistics
               -  stamp-malformed-flag-received number
               -  stamp-unrecognized-flag-received number
            +  test-duration number
            +  test-id (number | keyword)
            -  test-id-in-use number
         +  ttl number
+  service-activation-testhead
   +  acceptance-criteria-template ac-template-name string 
      +  cir-threshold number
      +  delay-threshold number
      +  delay-var-threshold number
      +  description string
      +  loss-threshold decimal-number
      +  loss-threshold-policing decimal-number
      +  m-factor number
      +  pir-threshold number
   +  frame-size-template fs-template-name string 
      +  size-a number
      +  size-b number
      +  size-c number
      +  size-d number
      +  size-e number
      +  size-f number
      +  size-g number
      +  size-h number
      +  size-u number
   +  results
      +  service-test test-name string 
      -  statistics
         -  service-test test-name string test-run number 
            -  accounting-oper-state keyword
            -  description string
            -  oper-state keyword
            -  service-stream stream-id number 
               -  acceptance-criteria-template string
               -  cir-threshold number
               -  delay-threshold number
               -  delay-var-threshold number
               -  description string
               -  frame-mix
                  -  frame-size-template string
                  -  sequence string
               -  frame-payload
                  -  data-pattern
                     -  repeat (hex-string | number)
                  -  ethernet
                     -  c-tag
                        -  discard-eligible boolean
                        -  dot1p number
                     -  destination-mac-address string
                     -  eth-cfm
                        -  source
                           -  association-id string
                           -  domain-id string
                           -  mep-id number
                     -  s-tag
                        -  discard-eligible boolean
                        -  dot1p number
               -  interface string
               -  interface-ref
                  -  interface reference
                  -  subinterface reference
               -  loss-threshold (decimal-number | keyword)
               -  loss-threshold-policing (decimal-number | keyword)
               -  m-factor number
               -  network-instance reference
               -  oper-state keyword
               -  pir-threshold number
               -  rate-cir number
               -  rate-pir number
               -  service-stream-completion-notification boolean
               -  size-a number
               -  size-b number
               -  size-c number
               -  size-d number
               -  size-e number
               -  size-f number
               -  size-g number
               -  size-h number
               -  size-u number
               -  source-mac-address string
               -  test-results test-type keyword 
                  -  measured-delay-avg number
                  -  measured-delay-max number
                  -  measured-delay-min number
                  -  measured-delay-var-avg number
                  -  measured-delay-var-max number
                  -  measured-delay-var-min number
                  -  measured-frame-loss-ratio decimal-number
                  -  measured-frame-rx number
                  -  measured-frame-tx number
                  -  measured-throughput number
                  -  oper-state keyword
                  -  oper-status-delay keyword
                  -  oper-status-delay-var keyword
                  -  oper-status-frame-loss-ratio keyword
                  -  oper-status-throughput keyword
                  -  time-end (date-and-time | keyword)
                  -  time-left number
                  -  time-start (date-and-time | keyword)
               -  test-types
                  -  cir boolean
                  -  cir-pir boolean
                  -  performance boolean
                  -  policing boolean
            -  service-test-completion-notification boolean
            -  stream-run-type keyword
            -  test-duration
               -  cir
                  -  minutes-seconds string
               -  cir-pir
                  -  minutes-seconds string
               -  performance
                  -  hours-minutes-seconds string
               -  policing
                  -  minutes-seconds string
            -  time-end (date-and-time | keyword)
            -  time-start (date-and-time | keyword)
   +  service-test test-name string 
      +  admin-state keyword
      +  description string
      +  service-stream stream-id number 
         +  acceptance-criteria-template reference
         +  admin-state keyword
         +  description string
         +  frame-mix
            +  frame-size-template reference
            +  sequence string
         +  frame-payload
            +  data-pattern
               +  repeat (hex-string | number)
            +  ethernet
               +  c-tag
                  +  discard-eligible boolean
                  +  dot1p number
               +  dst-mac string
               +  eth-cfm
                  +  source
                     +  association-id reference
                     +  domain-id reference
                     +  mep-id reference
               +  s-tag
                  +  discard-eligible boolean
                  +  dot1p number
         +  rate-cir number
         +  rate-pir number
         +  service-stream-completion-notification boolean
         +  test-types
            +  cir boolean
            +  cir-pir boolean
            +  performance boolean
            +  policing boolean
      +  service-test-completion-notification boolean
      +  stream-run-type keyword
      +  test-duration
         +  cir
            +  minutes-seconds string
         +  cir-pir
            +  minutes-seconds string
         +  performance
            +  hours-minutes-seconds string
         +  policing
            +  minutes-seconds string
+  stamp
   +  session-reflector
      +  inactivity-timer number
      +  network-instance name reference 
         +  admin-state keyword
         +  description string
         +  ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix) 
         -  oper-state keyword
         -  statistics
            -  malformed-packet number
            -  packet-discards-source-destination-equal number
            -  prefix-match-failure number
            -  session-reflector-udp-port-registration-failure number
            -  test-frames-received number
            -  test-frames-sent number
            -  test-sessions number
         -  test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number 
            -  current-ref-wait number
            -  last-sequence-number-received number
            -  last-sequence-number-transmitted number
            -  malformed-tlv number
            -  test-frames-received number
            -  test-frames-sent number
         +  udp-port number
      -  statistics
         -  packet-discards-on-reception number
         -  packet-discards-on-transmission number
         -  reflector-table-entries-full number
         -  reflectors-configured number
         -  reflectors-not-operational number
         -  reflectors-operational number
         -  session-reflector-not-found number
         -  test-frames-received number
         -  test-frames-sent number
         -  test-session-count number
+  twamp
   +  server
      +  network-instance name reference 
         +  admin-state keyword
         +  client-connection prefix (ipv4-prefix | ipv6-prefix) 
            +  maximum-connections number
            +  maximum-sessions number
            -  statistics
               -  control-connections-active number
               -  control-connections-rejected number
               -  test-packets-received number
               -  test-packets-transmitted number
               -  test-sessions-aborted number
               -  test-sessions-active number
               -  test-sessions-completed number
               -  test-sessions-rejected number
         -  control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number 
            -  control-packet-dscp number
            -  selected-mode keyword
            -  state keyword
            -  statistics
               -  test-packets-received number
               -  test-packets-transmitted number
               -  test-sessions-aborted number
               -  test-sessions-active number
               -  test-sessions-completed number
               -  test-sessions-rejected number
         +  control-packet-dscp (number | keyword)
         +  description string
         +  enforce-test-session-start-time boolean
         +  maximum-connections number
         +  maximum-sessions number
         -  modes keyword
         -  oper-state keyword
         +  servwait number
         -  session-reflector
            -  test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number 
               -  last-sequence-number-received number
               -  last-sequence-number-transmitted number
               -  parent-connection-client-ip (ipv4-address | ipv6-address)
               -  parent-connection-client-tcp-port number
               -  parent-connection-server-ip (ipv4-address | ipv6-address)
               -  parent-connection-server-tcp-port number
               -  statistics
                  -  test-packets-received number
                  -  test-packets-transmitted number
               -  test-packet-dscp number
               -  test-session-id string
         -  statistics
            -  control-connections-active number
            -  control-connections-rejected number
            -  test-packets-received number
            -  test-packets-transmitted number
            -  test-sessions-aborted number
            -  test-sessions-active number
            -  test-sessions-completed number
            -  test-sessions-rejected number
   -  statistics
      -  dropped-connection-states
         -  active number
         -  idle number
         -  process-started number
         -  process-stop number
         -  process-tw-session number
         -  setup-wait number
         -  started number
      -  dropped-connections
         -  connection-timeout number
         -  control-command-not-valid number
         -  incorrect-stop-session-count number
         -  invalid-invalid-hmac number
         -  maximum-global-limit-exceed number
         -  maximum-prefix-limit-exceed number
         -  memory-allocation-error number
         -  message-send-error number
         -  no-client-prefix-match number
         -  no-internal-resource number
         -  non-zero-sid-in-client-control-message number
         -  tcp-connection-closed number
         -  tcp-connection-fatal-error number
         -  tcp-unexpected-event number
         -  unspecified-mode number
         -  unsupported-mode number
      -  dropped-test-packet
         -  arrived-before-start-time number
         -  incorrect-packet-size number
         -  incorrect-source-address number
         -  invalid-error-estimate number
         -  invalid-server-octets number
         -  invalid-symmetric-mbz number
         -  no-start-sessions number
         -  reply-error number
      -  rejected-session
         -  bad-type-p number
         -  client-source-ip-unreachable number
         -  duplicate-session number
         -  invalid-ip-address-version number
         -  maximum-global-session-exceed number
         -  maximum-prefix-session-exceed number
         -  no-internal-resource number
         -  non-local-ip-destination number
         -  non-zero-mbz-value number
         -  non-zero-session-sender-sid number
         -  padding-too-big number
         -  refwait-timeout number
         -  timeout-too-large number
         -  udp-port-in-use number

oam Descriptions

oam

Description Enclosing container for OAM
Context oam
Treeoam
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ethcfm

Description OAM configuration and operational data for the management of Ethernet (ETH-CFM)
Contextoam ethcfm
Treeethcfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

cfm-stack-table

Description The cfm-stack-table provides an overview of CFM MEP state in a single view
Contextoam ethcfm cfm-stack-table
Treecfm-stack-table
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface
Description Enter the interface context
Context oam ethcfm cfm-stack-table interface
Treeinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface interface string level number direction keyword
Description List of interfaces that have CFM configured and the association CFM operational state
Contextoam ethcfm cfm-stack-table interface interface interface string level number direction keyword
Treeinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction the MEP faces

If 'down' the MEP sends CFM PDUs away from the MAC Relay Entity. If 'up' the MEP sends CFM PDUs towards the MAC Relay Entity.

Contextoam ethcfm cfm-stack-table interface interface interface string level number direction keyword
Options
  • down

  • up

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
defects keyword
Description Current received defects for the local MEP
Contextoam ethcfm cfm-stack-table interface interface interface string level number direction keyword defects keyword
Treedefects
Options
  • none

  • rdi-ccm

  • mac-status

  • remote-ccm

  • error-ccm

  • xcon-ccm

  • ais

  • csf-ais

  • csf-rdi

  • csf-los

  • eth-ed

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface
Description Enter the subinterface context
Context oam ethcfm cfm-stack-table subinterface
Treesubinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Description List of subinterfaces that have CFM configured and the association CFM operational state
Contextoam ethcfm cfm-stack-table subinterface subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Treesubinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction the MEP faces

If 'down' the MEP sends CFM PDUs away from the MAC Relay Entity. If 'up' the MEP sends CFM PDUs towards the MAC Relay Entity.

Contextoam ethcfm cfm-stack-table subinterface subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Options
  • down

  • up

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

domain domain-id string

Description

Maintenance Domain list

The Maintenance Domain includes all the configuration elements to define the individual domain behavior and scope of the CFM boundary. These are common elements that will be part of the related Maintenance Associations configured within the domain.

Contextoam ethcfm domain domain-id string
Treedomain
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements4000
domain-id string
Description Unique Maintenance Domain identifier
Context oam ethcfm domain domain-id string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association association-id string
Description Maintenance Association list
Context oam ethcfm domain domain-id string association association-id string
Treeassociation
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements4000
association-id string
Description Unique Maintenance Association identifier
Contextoam ethcfm domain domain-id string association association-id string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-auto-discovered-meps mep-id number
Description Add a list entry for association-auto-discovered-meps
Contextoam ethcfm domain domain-id string association association-id string association-auto-discovered-meps mep-id number
Treeassociation-auto-discovered-meps
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep-id number
Description

A list of the MEP IDs added to the MA by auto discovery

An auto-discovered remote MEP ID can be added to the association-mep list though configuration. Once added to the association-mep list it is removed from the auto-discovered MEP list.

Contextoam ethcfm domain domain-id string association association-id string association-auto-discovered-meps mep-id number
Range1 to 8191
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-format keyword
Description Format of the ma-name
Context oam ethcfm domain domain-id string association association-id string association-format keyword
Treeassociation-format
Options
  • vlan-id

    Primary VLAN ID

  • string

    Character string

  • integer

    2 octet number

  • vpn-id

    IETF RFC 2685 VPN ID

  • icc-based

    13 character string

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-meps mep-id number
Description Add a list entry for association-meps
Contextoam ethcfm domain domain-id string association association-id string association-meps mep-id number
Treeassociation-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep-id number
Description

A list of the MEP IDs expected for the MA

This is a configured list of MEPs added to the MA.

Contextoam ethcfm domain domain-id string association association-id string association-meps mep-id number
Range1 to 8191
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ccm-hold-time
Description Enter the ccm-hold-time context
Context oam ethcfm domain domain-id string association association-id string ccm-hold-time
Treeccm-hold-time
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-timeout number
Description

Additional time before a MEP declares a fault for peer CCM timeout conditions

Each unit (centisecond) is the equivalent to 10ms, or one hundredth of a second in additional time added before the recognition of a peer time-out. This is applicable to MEPs with a CCM-interval 100ms and below. A value 0 means there is no additive delay

Contextoam ethcfm domain domain-id string association association-id string ccm-hold-time delay-timeout number
Treedelay-timeout
Range0 to 1000
Default0
Unitscentiseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ccm-interval keyword
Description The interval between CCM transmissions to be used by all MEPs in Maintenance Association
Contextoam ethcfm domain domain-id string association association-id string ccm-interval keyword
Treeccm-interval
Default1s
Options
  • 10ms

  • 100ms

  • 1s

  • 10s

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ma-name
Description Context for association name
Context oam ethcfm domain domain-id string association association-id string ma-name
Treema-name
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
icc-value string
Description ITU Carrier Code (ICC) string required when using association-format icc-based
Contextoam ethcfm domain domain-id string association association-id string ma-name icc-value string
Treeicc-value
String Length8 to 13
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
id string
Description

VPN ID required when using association-format vpn-id

When the VPN OUI is less than 6 hex characters the configured value will be prepended with the appropriate number of zeros. When the VPN INDEX is less than 8 hex characters the configured value will be prepended with the appropriate number of zeros.

Contextoam ethcfm domain domain-id string association association-id string ma-name id string
Treeid
String Length3 to 15
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name string
Description Name string required when using association-format string
Contextoam ethcfm domain domain-id string association association-id string ma-name name string
Treename
String Length1 to 45
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
vid number
Description VLAN ID number required when using association-format vlan-id
Contextoam ethcfm domain domain-id string association association-id string ma-name vid number
Treevid
Range0 to 4094
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep mep-id reference
Description The list of Maintenance association End Points in a specific Maintance Association
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference
Treemep
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
continuity-check
Description This set of data definitions describes the handling of Ethernet Continuity Check (ETH-CCM)
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check
Treecontinuity-check
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ccm-local-fault
Description Enter the ccm local fault action context
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-local-fault
Treeccm-local-fault
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
action keyword
Description

Provides the ability to operationally affect the attachment where the down MEP is configured

A down MEP that experiences a defect condition matching the lowest-fault-priority defect can affect the operational state of the interface/subinterface the down MEP is configured on when the ccm-local-fault value is 'permit'. When the ccm-local-fault value is 'deny' there is no operational impact on the interface/subinterface. This leaf is only supported on down MEPs.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-local-fault action keyword
Treeaction
Defaultdeny
Options
  • permit

    Action taken

  • deny

    No action taken

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ccm-transmit keyword
Description

An indicator of whether the MEP is configured to transmit CCM packets

This only controls the MEPs ability to transmit CCM packets. A MEP has no administrative configuration to stop the processing of received CCM packets. The receive state machine for CCM will execute and packet processing will occur regardless of the ccm-transmit admin-state.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-transmit keyword
Treeccm-transmit
Defaultdisable
Options
  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
highest-priority-defect-found keyword
Description

Value indicating the highest-priority defect present since the MEP FNG state machine was in RESET

Multiple defect conditions may be present on a local MEP at any given time. This leaf records the highest priority defect since the MEP Fault Notification Generator (FNG) State Machine was last in the FNG_RESET state. This will be cleared when the when no defect flags are present.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check highest-priority-defect-found keyword
Treehighest-priority-defect-found
Options
  • none

  • rdi-ccm

  • mac-status

  • remote-ccm

  • error-ccm

  • xcon-ccm

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-cross-connect-ccm binary
Description

Up to 1024 bytes of last-received CCM that triggered a cross-connect-ccm fault

The last-cross-connect-ccm will be cleared when the condition is no longer present.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check last-cross-connect-ccm binary
Treelast-cross-connect-ccm
String Length1 to 1024
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-error-ccm binary
Description

Up to 1024 bytes printed from of last-received CCM that triggered an invalid-ccm fault

The last-error-ccm will be cleared when the condition is no longer present.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check last-error-ccm binary
Treelast-error-ccm
String Length1 to 1024
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
lowest-fault-priority-defect keyword
Description

The lowest priority defect that will generate a Fault Alarm

When the lowest fault priority defect is reached or exceeded, a fault alarm will be generated. This also drives the ../ccm-local-fault-action for down MEPs. When the lowest priority fault priority defect is reached the ../ccm-local-fault with a value 'permit' will operationally affect the interface or subinterface on which it is attached.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check lowest-fault-priority-defect keyword
Treelowest-fault-priority-defect
Defaultmac-remote-error-xcon
Options
  • all-def

  • mac-remote-error-xcon

  • remote-error-xcon

  • error-xcon

  • xcon

  • no-xcon

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sent-interface-status keyword
Description

Latest interface-status TLV value sent to the peer in the CCM packet

Indicates the interface status TLV information included in the most recent Connectivity Check Message (CCM) transmission from the local MEP. If the local MEP CCM transmissions are not enabled, or if no interface status TLV was included in the most recent transmission, then ccm-tx-if-status will return a value of is-no-interface-status-tlv (0).

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-interface-status keyword
Treesent-interface-status
Options
  • no-status-tlv

    Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received

  • up

    The interface is ready to pass packets

  • down

    The interface cannot pass packets

  • testing

    The interface is in some test mode

  • unknown

    The interface status cannot be determined for some reason

  • dormant

    The interface is not in a state to pass packets but is in a pending state, waiting for some external event

  • not-present

    Some component of the interface is missing

  • lower-layer-down

    The interface is down due to state of the lower layer interface condition

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sent-port-status keyword
Description

Latest port-status TLV value sent to the peer in the CCM packet

Indicates the port status TLV information included in the most recent Connectivity Check Message (CCM) transmission from the local MEP. If the local MEP CCM transmissions are not enabled, or if no port status TLV was included in the most recent transmission, then ccm-tx-port-status will return a value of ps-no-port-state-tlv (0).

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-port-status keyword
Treesent-port-status
Options
  • no-status-tlv

    Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received

  • blocked

    Ordinary data cannot pass freely through the port on which the remote MEP resides

  • up

    Ordinary data can pass freely through the port on which the remote MEP resides

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sent-remote-defect-indicator boolean
Description

Latest remote defect indicator (rdi) value sent to the peer in the CCM packet

Indicates if the Remote Defect Indication (RDI) bit was set to on in the most recent Connectivity Check Message (CCM) transmission from the local MEP.

If the local MEP CCM transmissions are not enabled, or if the RDI bit was not set in the most recent transmission, then ccm-tx-rdi will return a value of 'false (2)'.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-remote-defect-indicator boolean
Treesent-remote-defect-indicator
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

A value indicating the direction which the MEP faces on the interface/subinterface

For all but MAC-VRF subinterfaces, the direction of the MEP must be 'down'. The MAC-VRF is a bridging entity and therefore supports the direction 'up'. The other entities are not bridging and therefore cannot support the direction 'up'.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference direction keyword
Treedirection
Options
  • down

  • up

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface-ref
Description Enter the interface-ref context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference interface-ref
Treeinterface-ref
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface reference
Description

Reference to a subinterface

This requires the base interface to be specified using the interface leaf in this container.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference interface-ref subinterface reference
Treesubinterface
Referenceinterface name string subinterface index number
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
linktrace
Description Data definitions related to a linktrace test result
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace
Treelinktrace
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
latest-run
Description Enter the latest-run context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run
Treelatest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
destination-mac-address string
Description

Indicates the destination MAC address used for the last test

When the destination is a remote-mepid the MAC address will be the resolved MAC address for the remote mepid

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run destination-mac-address string
Treedestination-mac-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply reply-order number
Description The list of LTRs associated with a specific Linktrace transaction
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements32
reply-order number
Description

An index to distinguish among multiple LTRs with the same LTR transaction-id field value

The reply-order are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTR

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chassis-id-subtype (number | keyword)
Description Data definitions associated with the Sender ID TLV
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number chassis-id-subtype (number | keyword)
Treechassis-id-subtype
Range8 to 255
Options
  • CHASSIS_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port or backplane component

  • MAC_ADDRESS

    Chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001

  • NETWORK_ADDRESS

    Chassis identifier based on a network address, associated with a particular chassis. The encoded address is composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value

  • INTERFACE_NAME

    Chassis identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • LOCAL

    Chassis identifier based on a locally defined value

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
egress-action keyword
Description

An enumerated value indicating the value returned n the Egress Action field

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-action keyword
Treeegress-action
Options
  • ok

    Indicates the target data frame would be passed through to the MAC Relay Entity

  • down

    Indicates the Bridge Ports MAC Operational parameter is false

  • blocked

    Indicates the target data frame would not be forwarded if received on this Port due to active topology enforcement

  • vid

    Indicates the ingress port is not in the member set of the LTMs VID, and ingress filtering is enabled

    This means the target data frame would be filtered by ingress filtering.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
egress-port-id
Description Enter the egress-port-id context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-port-id
Treeegress-port-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
port-id-subtype keyword
Description

The Egress Port ID field and the corresponding port ID value

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-port-id port-id-subtype keyword
Treeport-id-subtype
Options
  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Port identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port component

  • MAC_ADDRESS

    Port identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with a port

  • NETWORK_ADDRESS

    Port identifier based on a network address, associated with a particular port

  • INTERFACE_NAME

    Port identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • AGENT_CIRCUIT_ID

    Port identifer based on the circuit id in the DHCP relay agent information option as defined in IETF RFC 3046

  • LOCAL

    Port identifier based on a locally defined alphanumeric string

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ingress-action keyword
Description

An enumerated value indicating the value returned in the Ingress Action field

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-action keyword
Treeingress-action
Options
  • ok

    Indicates the target data frame would be passed through to the MAC Relay Entity

  • down

    Indicates the Bridge Ports MAC Operational parameter is false

  • blocked

    Indicates the target data frame would not be forwarded if received on this Port due to active topology enforcement

  • vid

    Indicates the ingress port is not in the member set of the LTMs VID, and ingress filtering is enabled

    This means the target data frame would be filtered by ingress filtering.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ingress-port-id
Description Enter the ingress-port-id context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-port-id
Treeingress-port-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
port-id-subtype keyword
Description

The Ingress Port ID field and the corresponding port ID value

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-port-id port-id-subtype keyword
Treeport-id-subtype
Options
  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Port identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port component

  • MAC_ADDRESS

    Port identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with a port

  • NETWORK_ADDRESS

    Port identifier based on a network address, associated with a particular port

  • INTERFACE_NAME

    Port identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • AGENT_CIRCUIT_ID

    Port identifer based on the circuit id in the DHCP relay agent information option as defined in IETF RFC 3046

  • LOCAL

    Port identifier based on a locally defined alphanumeric string

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-egress-identifier
Description TLV included with in the LTM used to identify the instantiating or relaying management point
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number last-egress-identifier
Treelast-egress-identifier
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ltr-relay keyword
Description An enumerated value indicating the value returned in the Relay Action field
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ltr-relay keyword
Treeltr-relay
Options
  • hit

    Indicates the LTM reached an MP whose MAC address matches the target MAC address

  • filtering-database

    Indicates the Egress Port was determined by consulting the Filtering Database

  • mip-ccm-database

    Indicates the Egress Port was determined by consulting the MIP CCM Database

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-egress-identifier
Description TLV included with in the LTM used to identify the instantiating or relaying management point
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number next-egress-identifier
Treenext-egress-identifier
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run test-status keyword
Treetest-status
Options
  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
transmit-ltm-flags bits
Description

The Flags field for LTMs transmitted by the MEP

'use-fdb-only' indicates only the network instance mac-table (or forwarding database) is to be used to forward the LTM to the next hop.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run transmit-ltm-flags bits
Treetransmit-ltm-flags
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
status keyword
Description

If an active linktrace test is executing from this MEP

Only a single Linktrace test can be active on a MEP at one time. When the status is 'active' the MEP has a linktrace session open. Another linktrace test form this MEP is not allowed. When the status is 'inactive' the MEP does not currently have a linktrace session open.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace status keyword
Treestatus
Options
  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loopback
Description Enter the loopback context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback
Treeloopback
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
multicast-latest-run
Description Enter the multicast-latest-run context
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run
Treemulticast-latest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep-mac remote-mac-address string
Description Enter the remote-mep-mac list instance
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string
Treeremote-mep-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence-number sequence-number number received-index number
Description Enter the sequence-number list instance
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string sequence-number sequence-number number received-index number
Treesequence-number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
received-index number
Description

Indicates the order in which the reply was received for the corresponding remote MAC address

This is a locally assigned index that can be used to detect out of order responses.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string sequence-number sequence-number number received-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
received-unexpected-sequence-number number
Description The total number of Loopback Replies received and discarded due to unexpected sequence number
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run statistics received-unexpected-sequence-number number
Treereceived-unexpected-sequence-number
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run test-status keyword
Treetest-status
Options
  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
status keyword
Description

If an active loopback test is executing from this MEP

Only a single loopback test can be active on a MEP at one time. When the status is 'active' the MEP has a loopback session open. Another loopback test form this MEP is not allowed. When the status is 'inactive' the MEP does not currently have a loopback session open.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback status keyword
Treestatus
Options
  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unicast-latest-run
Description Enter the unicast-latest-run context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run
Treeunicast-latest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
destination-mac-address string
Description

Indicates the destination MAC address used for the last test

When the destination is a remote-mepid the MAC address will be the resolved MAC address for the remote mepid

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run destination-mac-address string
Treedestination-mac-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
received-unexpected-sequence-number number
Description The total number of Loopback Replies received and discarded due to unexpected sequence number
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run statistics received-unexpected-sequence-number number
Treereceived-unexpected-sequence-number
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run test-status keyword
Treetest-status
Options
  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac-address
Description

Context allows for the MEP MAC configuration

Leaf /ethcfm/mac-allocation/mode determines which of the MAC configurations are applied.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference mac-address
Treemac-address
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
custom-mac-pool
Description Enter the custom-mac-pool context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference mac-address custom-mac-pool
Treecustom-mac-pool
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index number
Description

Value used to select a MAC address from the custom-mac-pool

Index reference to the ordered list of MAC addresses in the pool. the same value should not be reused in the same network-instance on different subinterfaces.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference mac-address custom-mac-pool index number
Treeindex
Range1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
system-mac-pool-index number
Description

Value used to select a MAC address from the system-mac-pool

Index reference to the ordered list of MAC addresses in the pool. the same value should not be reused in the same network-instance on different subinterfaces.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference mac-address system-mac-pool-index number
Treesystem-mac-pool-index
Range1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
opcode opcode-name keyword
Description Enter the CFM OpCode list instance
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference opcode opcode-name keyword
Treeopcode
ConfigurableFalse
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
opcode-name keyword
Description The name that defines which CFM OpCode for the statistics
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference opcode opcode-name keyword
Options
  • total

  • other

  • ccm

  • lbr

  • lbm

  • ltr

  • ltm

  • ais

  • lck

  • tst

  • laps

  • raps

  • mcc

  • lmr

  • lmm

  • 1dm

  • dmr

  • dmm

  • exr

  • exm

  • csf

  • vsr

  • vsm

  • 1sl

  • slr

  • slm

  • gnm

Configurable False
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep remote-mep-id number
Description The list of remote MEPs in the MEP CCM database
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number
Treeremote-mep
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
auto-discovered boolean
Description

Indicates if the remote MEP has be auto-discovered 'true' indicates the remote MEP has been auto-discovered

Display the method by which the remote MEP has been added to the remote-mep database. When 'false' the remote MEP has been added by manual configuration. When 'true' the remote-mep has been added using the auto discovery method.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number auto-discovered boolean
Treeauto-discovered
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chassis-id-subtype (number | keyword)
Description Data definitions associated with the Sender ID TLV
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number chassis-id-subtype (number | keyword)
Treechassis-id-subtype
Range8 to 255
Options
  • CHASSIS_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port or backplane component

  • MAC_ADDRESS

    Chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001

  • NETWORK_ADDRESS

    Chassis identifier based on a network address, associated with a particular chassis. The encoded address is composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value

  • INTERFACE_NAME

    Chassis identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • LOCAL

    Chassis identifier based on a locally defined value

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface-status-tlv keyword
Description The enumerated value from the Interface Status TLV from the last CCM received from the remote MEP
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number interface-status-tlv keyword
Treeinterface-status-tlv
Options
  • no-status-tlv

    Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received

  • up

    The interface is ready to pass packets

  • down

    The interface cannot pass packets

  • testing

    The interface is in some test mode

  • unknown

    The interface status cannot be determined for some reason

  • dormant

    The interface is not in a state to pass packets but is in a pending state, waiting for some external event

  • not-present

    Some component of the interface is missing

  • lower-layer-down

    The interface is down due to state of the lower layer interface condition

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
port-status-tlv keyword
Description The enumerated value from the Port Status TLV from the last CCM received from the remote MEP
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number port-status-tlv keyword
Treeport-status-tlv
Options
  • no-status-tlv

    Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received

  • blocked

    Ordinary data cannot pass freely through the port on which the remote MEP resides

  • up

    Ordinary data can pass freely through the port on which the remote MEP resides

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-defect-indicator boolean
Description

An indication of the state of the RDI bit in the last received CCM, 'true' for RDI set

The CCM message contains a flag to indicate if a MEP has detected a defect condition. When the RDI bit is set to 1 in the PDU that means the MEP is experiencing a defect condition and is including this in the transmitted CCM packets. When no defects are detected the RDI bit is set to 0 in the packet.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-defect-indicator boolean
Treeremote-defect-indicator
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep-failed-ok-time number
Description

The time at which the Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state

This type is based on the timeticks type defined in RFC 6991, but with 64-bit width. It represents the time, modulo 2^64, in hundredths of a second between two epochs.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-mep-failed-ok-time number
Treeremote-mep-failed-ok-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep-state keyword
Description An enumerated value indicating the operational state of the Remote MEP state machine
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-mep-state keyword
Treeremote-mep-state
Options
  • idle

    Indicates momentary state during reset

  • start

    Indicates the timer has not expired since the state machine was reset, and no valid CCM has yet been received

  • failed

    Indicates the timer has expired, both since the state machine was reset and since a valid CCM was received.

  • ok

    Indicates the timer has not expired since a valid CCM was received.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
network-instance
Description Enter the network-instance context
Context oam ethcfm domain domain-id string association association-id string network-instance
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep-auto-discovery
Description This set of data definitions describes the auto discovery behavior for remote MEPs
Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery
Treeremote-mep-auto-discovery
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
admin-state keyword
Description

Enable the ability to auto-discover remote MEPs within the Maintenance Association

When the admins-state is 'enable' unknown remote MEP peers which have the same Maintenance Association information will be automatically added to the remote-mep database and these unknown peer MEPS will not raise the defect error-ccm. When the admin-state is 'disable' unknown remote MEP peers will not automatically be added to the remote-mep database. Unknown MEPs will cause the defect error-ccm to be raised.

If the admin-state value is changed from 'enable' to 'disable' all previously learned MEPs for the Maintenance Association will be removed from the remote-mep database and auto-discovery will be disabled.

Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery admin-state keyword
Treeadmin-state
Defaultdisable
Options
  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
aging-timer (number | keyword)
Description

Optional time in seconds the peer MEP remains in the remote-mep database after defect remote-ccm

Peer MEPs added to the remote-mep database do not age out unless the optional aging-timer is configured. The aging-timer value is the additional time the remote peer MEP remains in the database since the recognition of the defect remote-ccm (peer timeout where no packets have arrived from the peer in 3.5 times the ccm-interval). A value of 'none' disables aging.

Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery aging-timer (number | keyword)
Treeaging-timer
Range1 to 86400
Defaultnone
Unitsseconds
Options
  • none

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sender-id-permission-type keyword
Description

Whether to include the Sender ID TLV with configured type

Sender ID TLV will be sent when the id-permission is set to a value other than 'none'. When transmitting the Sender ID TLV the information carried in the TLV will match the configured value. When id-permission is set to 'chassis' the chassis information (chassis-component or local) will be based on the /ethcfm/sender-id/chassis-type configuration.

Contextoam ethcfm domain domain-id string association association-id string sender-id-permission-type keyword
Treesender-id-permission-type
Defaultnone
Options
  • none

  • chassis

Configurable True
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
domain-format keyword
Description Format of the md-name
Context oam ethcfm domain domain-id string domain-format keyword
Treedomain-format
Options
  • none

    No Maintenance Domain Name

  • dns-like

    Domain Name based string

  • mac-address

    MAC address

  • string

    Character string

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
level number
Description

Integer identifying the Maintenance Domain Level

Higher numbers correspond Maintenance Domains with the greatest physical reach. Lower numbers correspond to Maintenance Domains with more limited physical reach. CFM packets with higher levels will flow transparently across domains of lower level values.

Contextoam ethcfm domain domain-id string level number
Treelevel
Range0 to 7
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
md-name
Description Context for domain name
Context oam ethcfm domain domain-id string md-name
Treemd-name
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dns string
Description DNS format sting required when using domain-format 'dns-like'
Contextoam ethcfm domain domain-id string md-name dns string
Treedns
String Length1 to 43
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac string
Description MAC address string required when using domain-format 'mac-address'
Contextoam ethcfm domain domain-id string md-name mac string
Treemac
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name string
Description Name string required when using domain-format 'string'
Contextoam ethcfm domain domain-id string md-name name string
Treename
String Length1 to 43
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
two-octet-int number
Description Two bytes value required when using domain-format 'mac-address'
Contextoam ethcfm domain domain-id string md-name two-octet-int number
Treetwo-octet-int
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number

Description Enter the learned-remote-mac list instance
Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number
Treelearned-remote-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-id string
Description A unique administratively assigned name used to identify an association
Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number
String Length1 to 64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
local-mep-id number
Description Specifies a local MEP identifier unique over a given maintenance association
Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number
Range1 to 8191
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
remote-mep-id number
Description Specifies a remote MEP identifier unique over a given maintenance association
Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number
Range1 to 8191
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
stale-flag boolean
Description

Indicates if the learned MAC entry for this remote MEP matches the entry found in the list on the local MEP

The value 'false' indicates that the MAC address matches the entry found in both the lists for the same local and remote MEP values and therefore is not considered stale.

The value 'true' indicates either the entries do not match, or there is no equivalent entry for the remote MEP in the list on the local MEP, so the learned remote MAC address in this table is considered stale.

Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number stale-flag boolean
Treestale-flag
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

mac-allocation

Description Enter the mac-allocation context
Context oam ethcfm mac-allocation
Treemac-allocation
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
custom-mac-pool name string
Description Enter the custom-mac-pool list instance
Contextoam ethcfm mac-allocation custom-mac-pool name string
Treecustom-mac-pool
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements1
name string
Description Custom MAC pool list
Context oam ethcfm mac-allocation custom-mac-pool name string
String Length1 to 247
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
count number
Description

Number of contiguous MAC addresses in the custom-mac-pool

Last byte of 'starting-mac' is incremented to create a list of unique MAC addresses for the pool.

Contextoam ethcfm mac-allocation custom-mac-pool name string count number
Treecount
Range1 to 64
Default64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
highest-index-in-use number
Description

Highest index value configured against the pool

Resizing the pool is allowed if ethcfm/mac-allocation/custom-mac-pool/count is greater than or equal to this value.

Contextoam ethcfm mac-allocation custom-mac-pool name string highest-index-in-use number
Treehighest-index-in-use
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac-address index number mac-address string
Description Add a list entry for mac-address
Context oam ethcfm mac-allocation custom-mac-pool name string mac-address index number mac-address string
Treemac-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
starting-mac string
Description

First unicast MAC address of the pool

Combination of the 'starting-mac' and the 'count' cannot cause a change to the first five bytes of the MAC address.

Contextoam ethcfm mac-allocation custom-mac-pool name string starting-mac string
Treestarting-mac
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface name string
Description Enter the interface list instance
Context oam ethcfm mac-allocation interface name string
Treeinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name string
Description

Interface list

Allocated MAC addressing from interface perspective

Contextoam ethcfm mac-allocation interface name string
String Length3 to 20
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
linecard number
Description Linecard hosting the interface
Context oam ethcfm mac-allocation interface name string linecard number
Treelinecard
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep domain-id string association-id string mep-id number
Description MEP List
Context oam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number
Treemep
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
domain-id string
Description Unique administratively assigned name used to identify a domain
Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number
String Length1 to 64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-id string
Description Unique administratively assigned name used to identify an association
Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number
String Length1 to 64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep-id number
Description MEP identifier unique over a given maintenance association
Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number
Range1 to 8191
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index number
Description

Index associated with the MAC address

Only displayed for mac-allocated-type of 'custom-mac-pool' or 'system-mac-pool'.

Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac-allocated-type keyword
Description Method by which the active MAC address was selected
Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number mac-allocated-type keyword
Treemac-allocated-type
Options
  • port

    Maintenance Point (MP) MAC allocated using hardware MAC address of the Ethernet port

  • custom-mac-pool

    Maintenance Point (MP) MAC allocated using custom-mac-pool

  • system-mac-pool

    Maintenance Point (MP) MAC allocated using system-mac-pool

  • custom-address

    Maintenance Point (MP) allocated using custom MAC address

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface string
Description

Subinterface name

MP created on subinterface will include the subinterface information. MP created on interface will not include this leaf.

Contextoam ethcfm mac-allocation interface name string mep domain-id string association-id string mep-id number subinterface string
Treesubinterface
String Length5 to 25
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mode keyword
Description

ETHCFM MP MAC address allocation method

Selection MAC address configuration under the MP is controlled by preference unique to each mode.

Contextoam ethcfm mac-allocation mode keyword
Treemode
Options
  • port

    Maintenance Point (MP) MAC allocation uses hardware MAC address of the Ethernet port

    Other MAC address configuration methods under the MP are ignored

  • mac-pool

    Maintenance Point (MP) MAC allocation prefers the custom or system mac pools

    Preference order of configured options under the MP custom-mac-pool, system-mac-pool

  • any

    Maintenance Point (MP) allocation may use any MAC allocation method

    Preference order of configured options under the MP custom-address, custom-mac-pool, system-mac-pool, port

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
network-instance name string
Description Enter the network-instance list instance
Contextoam ethcfm mac-allocation network-instance name string
Treenetwork-instance
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name string
Description

Network instance list

Allocated MAC addressing from network instance perspective

Contextoam ethcfm mac-allocation network-instance name string
String Length1 to 247
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface name string
Description Enter the subinterface list instance
Context oam ethcfm mac-allocation network-instance name string subinterface name string
Treesubinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep domain-id string association-id string mep-id number
Description MEP List
Context oam ethcfm mac-allocation network-instance name string subinterface name string mep domain-id string association-id string mep-id number
Treemep
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
duplicate-mac boolean
Description

Whether a MAC address is being reused in the same network instance

Value 'true' duplicate MAC addresses present in the network instance. Value 'false' all MAC addresses in the network instance are unique.

Contextoam ethcfm mac-allocation network-instance name string subinterface name string mep domain-id string association-id string mep-id number duplicate-mac boolean
Treeduplicate-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac-allocated-type keyword
Description Method by which the active MAC address was selected
Contextoam ethcfm mac-allocation network-instance name string subinterface name string mep domain-id string association-id string mep-id number mac-allocated-type keyword
Treemac-allocated-type
Options
  • port

    Maintenance Point (MP) MAC allocated using hardware MAC address of the Ethernet port

  • custom-mac-pool

    Maintenance Point (MP) MAC allocated using custom-mac-pool

  • system-mac-pool

    Maintenance Point (MP) MAC allocated using system-mac-pool

  • custom-address

    Maintenance Point (MP) allocated using custom MAC address

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
system-mac-pool
Description Enter the system-mac-pool context
Context oam ethcfm mac-allocation system-mac-pool
Treesystem-mac-pool
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
count number
Description

Number of contiguous MAC addresses in the system pool

Last byte of 'starting-mac' is incremented to create a list of unique MAC addresses for the pool.

Contextoam ethcfm mac-allocation system-mac-pool count number
Treecount
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mac-address index number mac-address string
Description Add a list entry for mac-address
Context oam ethcfm mac-allocation system-mac-pool mac-address index number mac-address string
Treemac-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
starting-mac string
Description

First unicast MAC address of the pool

Pool created by the system for the explicit use of ETHCFM MPs.

Contextoam ethcfm mac-allocation system-mac-pool starting-mac string
Treestarting-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

sender-id

Description Enter the sender-id context
Context oam ethcfm sender-id
Treesender-id
ConfigurableTrue
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
chassis-local-name string
Description

Local name used for sender-id TLV chassis-component when chassis-type is 'local'

This configuration is mandatory when ../chassis-type value is 'local' This configuration is optional when the ../chassis-type value is not 'local'. In the latter case the chassis-local-name is not used in the sender-id TLV

Contextoam ethcfm sender-id chassis-local-name string
Treechassis-local-name
String Length1 to 45
ConfigurableTrue
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
chassis-type keyword
Description Selection of chassis-component type to be included in CFM PDUs
Contextoam ethcfm sender-id chassis-type keyword
Treechassis-type
Defaultsystem
Options
  • system

  • local

Configurable True
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S

statistics

Description Enter the ETH-CFM system level statistics context
Contextoam ethcfm statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
error-discards number
Description

Indicates the number of discarded ETH-CFM packets received on the node

A packet may be discarded for several reasons including, but not limited to, malformed PDU, invalid TLVs, MEP admin down, etc.

Contextoam ethcfm statistics error-discards number
Treeerror-discards
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
opcode opcode-name keyword
Description Enter the CFM OpCode list instance
Context oam ethcfm statistics opcode opcode-name keyword
Treeopcode
ConfigurableFalse
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
opcode-name keyword
Description The name that defines which CFM OpCode for the statistics
Contextoam ethcfm statistics opcode opcode-name keyword
Options
  • total

  • other

  • ccm

  • lbr

  • lbm

  • ltr

  • ltm

  • ais

  • lck

  • tst

  • laps

  • raps

  • mcc

  • lmr

  • lmm

  • 1dm

  • dmr

  • dmm

  • exr

  • exm

  • csf

  • vsr

  • vsm

  • 1sl

  • slr

  • slm

  • gnm

Configurable False
Platforms7730 SXR-1d-32D, 7730 SXR-1x-44S
receive-congestion-drops number
Description

Indicates the number of dropped ETH-CFM packets on the node in the receive direction

A packet drop can be caused be resource contention.

Contextoam ethcfm statistics receive-congestion-drops number
Treereceive-congestion-drops
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
receive-count number
Description Indicates the number of ETH-CFM packets received on the node
Contextoam ethcfm statistics receive-count number
Treereceive-count
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
transmit-congestion-drops number
Description

Indicates the number of dropped ETH-CFM packets on the node in the transmit direction

A packet drop can be caused be resource contention.

Contextoam ethcfm statistics transmit-congestion-drops number
Treetransmit-congestion-drops
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
transmit-count number
Description Indicates the number of ETH-CFM packets transmitted from the node
Contextoam ethcfm statistics transmit-count number
Treetransmit-count
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ippm

Description Context for IP Performance Measurement shared elements
Contextoam ippm
Treeippm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

source-udp-port-pools

Description Context for source UDP port allocation to IPPM application
Contextoam ippm source-udp-port-pools
Treesource-udp-port-pools
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
port port-number number
Description List of UDP ports
Context oam ippm source-udp-port-pools port port-number number
Treeport
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
port-number number
Description UDP port number
Context oam ippm source-udp-port-pools port port-number number
Range64374 to 64383
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
application-assignment keyword
Description IP Performance Measurement application assigned to the UDP port
Contextoam ippm source-udp-port-pools port port-number number application-assignment keyword
Treeapplication-assignment
Defaultunassigned
Options
  • oam-pm-ip

    Performance monitoring IP

  • link-measurement

    Link Measurement

  • unassigned

    No IPPM application assigned

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
in-use boolean
Description

Referenced by an application test

When false no test is referencing the UDP port. When true a test is referencing the UDP port. The application assignment can only be changed when the value is false.

Contextoam ippm source-udp-port-pools port port-number number in-use boolean
Treein-use
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

link-measurement

Description Context for Link Measurement
Context oam link-measurement
Treelink-measurement
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

interface name string

Description List of interface names
Context oam link-measurement interface name string
Treeinterface
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name string
Description

The interface name

This can be configured in one of two forms. Fully qualified reference to an interface subinterface, example ethernet-1/1.1, or symbolic alias, example interface-1. When the fully qualified name is specified the 'interface-ref' should not be configured. When the symbolic alias is specified the 'interface-ref' must be configured.

Contextoam link-measurement interface name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
detectable-transmit-error keyword
Description

Detectable error interrupting Link Measurement tests

Packet transmission is prevented for the following detectable transmit errors; subinterface-down, invalid-dest-ip, invalid-subinterface-type, same-source-ip-destination-ip.

Contextoam link-measurement interface name string detectable-transmit-error keyword
Treedetectable-transmit-error
Options
  • none

  • subinterface-down

  • unexpected-error

  • source-ip-not-local

  • invalid-dest-ip

  • subinterface-type-not-supported

  • same-source-ip-destination-ip

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dynamic-measurement
Description Context for Dynamic Measurement of IP interface
Contextoam link-measurement interface name string dynamic-measurement
Treedynamic-measurement
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
stamp
Description Context for STAMP IP protocol configuration
Contextoam link-measurement interface name string dynamic-measurement stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ipv4
Description Context for ipv4 address configuration
Contextoam link-measurement interface name string dynamic-measurement stamp ipv4
Treeipv4
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
destination-ip string
Description

Unicast IPv4 destination address

When not specified and the primary local IP address has a prefix length of 30 or 31 the destination address will be the compliment. Otherwise, must be specified.

Contextoam link-measurement interface name string dynamic-measurement stamp ipv4 destination-ip string
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ipv6
Description Context for ipv6 address
Context oam link-measurement interface name string dynamic-measurement stamp ipv6
Treeipv6
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
destination-ip string
Description

Global unicast or link-local unicast IPv6 destination address

When not specified the IPv6 destination discovery is an option for the measurement template.

Contextoam link-measurement interface name string dynamic-measurement stamp ipv6 destination-ip string
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source-ip string
Description

Global unicast or link-local unicast IPv6 source address

When not specified the link-local interface address will be used.

Contextoam link-measurement interface name string dynamic-measurement stamp ipv6 source-ip string
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface-ref
Description

Reference to a subinterface

If interface-ref is configured the ../interface/name will be considered as an alias regardless of its form.

Contextoam link-measurement interface name string interface-ref
Treeinterface-ref
ConfigurableTrue
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface reference
Description Reference to a base interface
Context oam link-measurement interface name string interface-ref interface reference
Treeinterface
Referenceinterface name string
ConfigurableTrue
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface reference
Description

Reference to a subinterface

This requires the base interface to be specified using the interface leaf in this container.

Contextoam link-measurement interface name string interface-ref subinterface reference
Treesubinterface
Referenceinterface name string subinterface index number
ConfigurableTrue
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-reported-dynamic-delay (number | keyword)
Description Last delay measurement reported
Context oam link-measurement interface name string last-reported-dynamic-delay (number | keyword)
Treelast-reported-dynamic-delay
Range0 to 2147483647
Unitsmicroseconds
Options
  • none

    No value has been reported

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description Operational state of link measurement on this interface
Contextoam link-measurement interface name string oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
operational-failure keyword
Description Reason(s) why this interface's link measurement is operationally disabled
Contextoam link-measurement interface name string operational-failure keyword
Treeoperational-failure
Options
  • no-protocol

  • template-admin-down

  • udp-port-unavailable

  • internal-error

  • subinterface-not-found-in-network-instance

  • network-instance-type-not-supported

  • subinterface-type-not-supported

  • no-template

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
report-timestamp string
Description

Time a threshold event was last reported to the routing engine

When ./last-reported-dynamic-delay > 0, report-timestamp holds the time at which ./last-reported-dynamic-delay was reported to the routing engine.

When ./last-reported-dynamic-delay = 0, report-timestamp holds the time at which ./last-reported-dynamic-delay was 'cleared' (because aging timer expired).

When ./last-reported-dynamic-delay = 'none', report-timestamp holds '1970-Jan-01 00:00:00.0' UTC as a placeholder representing a delay has not yet been reported to the routing engine.

Contextoam link-measurement interface name string report-timestamp string
Treereport-timestamp
String Length20 to 32
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
report-triggered-by keyword
Description Triggering event for the report
Context oam link-measurement interface name string report-triggered-by keyword
Treereport-triggered-by
Options
  • none

  • sample-threshold-absolute

  • sample-threshold-relative

  • aggregate-threshold-absolute

  • aggregate-threshold-relative

  • expired

  • reporting-disabled

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reporting boolean
Description IP interface reporting to the routing engine
Contextoam link-measurement interface name string reporting boolean
Treereporting
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Aggregate sample window information and sample window statistics
Contextoam link-measurement interface name string statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
aggregate-sample-window
Description

Context for aggregate sample window statistics

Rolling buffer maintains the last 20 results.

Contextoam link-measurement interface name string statistics aggregate-sample-window
Treeaggregate-sample-window
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description The index list instance
Context oam link-measurement interface name string statistics aggregate-sample-window index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
window-state keyword
Description Enter the window-state context
Context oam link-measurement interface name string statistics aggregate-sample-window index index number window-state keyword
Treewindow-state
Options
  • completed

    Window ran to completion

  • in-progress

    Window currently active

  • sw-reported

    Sample window threshold triggered report, aggregated sample window restarted

  • asw-reported

    Aggregate sample window threshold triggered report

  • terminated

    Window terminated prior to completion

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sample-window
Description

Context for sample window statistics

Rolling buffer maintains the last 50 results.

Contextoam link-measurement interface name string statistics sample-window
Treesample-window
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description Index list instance
Context oam link-measurement interface name string statistics sample-window index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index number
Description Index used to differentiate sample windows on the same subinterface
Contextoam link-measurement interface name string statistics sample-window index index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
window-state keyword
Description Enter the window-state context
Context oam link-measurement interface name string statistics sample-window index index number window-state keyword
Treewindow-state
Options
  • completed

    Window ran to completion

  • in-progress

    Window currently active

  • sw-reported

    Sample window threshold triggered report, aggregated sample window restarted

  • terminated

    Window terminated prior to completion

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

measurement-template template-name string

Description List of measurement templates
Context oam link-measurement measurement-template template-name string
Treemeasurement-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements255
template-name string
Description

Measurement template name

Modificaiton to bin-group attributes will cause associated tests to be terminated and restarted.

Contextoam link-measurement measurement-template template-name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
aggregate-sample-window
Description

Context for aggregate sample window

The aggregate sample window is a collection of sample windows. It executes threshold comparisons based on the results in each sample window.

Contextoam link-measurement measurement-template template-name string aggregate-sample-window
Treeaggregate-sample-window
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
threshold
Description Context for threshold configuration
Context oam link-measurement measurement-template template-name string aggregate-sample-window threshold
Treethreshold
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay keyword
Description Delay measurement type of interest
Context oam link-measurement measurement-template template-name string delay keyword
Treedelay
Defaultminimum
Options
  • minimum

  • maximum

  • average

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interval number
Description Interval between test packet transmissions
Contextoam link-measurement measurement-template template-name string interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-reported-dynamic-delay-hold number
Description

Wait time to flush the last reported delay after operational change

This command configures the timer that specifies the wait time before the last reported delay measurement is flushed after a link measurement test enters the operationally down state.

When 0 the last reported delay is flushed immediately without delay.

Contextoam link-measurement measurement-template template-name string last-reported-dynamic-delay-hold number
Treelast-reported-dynamic-delay-hold
Range0 to 86400
Default86400
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reporting boolean
Description

Report value reaching the threshold

When true threshold events are reported to the routing engine. When false threshold events are not reported to the routing engine

Contextoam link-measurement measurement-template template-name string reporting boolean
Treereporting
Defaulttrue
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sample-window
Description

Context for sample window

The sample window is a collection of individual test packet results. It executes threshold comparisons using the results in the sample window.

Contextoam link-measurement measurement-template template-name string sample-window
Treesample-window
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
threshold
Description Context for threshold configuration
Context oam link-measurement measurement-template template-name string sample-window threshold
Treethreshold
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
stamp
Description Context for STAMP options used by the measurement template
Contextoam link-measurement measurement-template template-name string stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dscp (number | keyword)
Description DSCP value
Context oam link-measurement measurement-template template-name string stamp dscp (number | keyword)
Treedscp
Range0 to 63
DefaultCS6
Options
  • CS0

  • LE

  • CS1

  • AF11

  • AF12

  • AF13

  • CS2

  • AF21

  • AF22

  • AF23

  • CS3

  • AF31

  • AF32

  • AF33

  • CS4

  • AF41

  • AF42

  • AF43

  • CS5

  • EF

  • CS6

  • CS7

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forwarding-class reference
Description

The forwarding class

When value not specified, the sgt-qos value will be used

Contextoam link-measurement measurement-template template-name string stamp forwarding-class reference
Treeforwarding-class
Referenceqos forwarding-classes forwarding-class name string
ConfigurableTrue
Platforms7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ipv6-destination-discovery
Description

Context for IPv6 destination discovery

Ping well-known multicast address ff02::2 (all routers) to solicit response from the peer. Use the source address in the response as the destination address in the STAMP test packets.

Contextoam link-measurement measurement-template template-name string stamp ipv6-destination-discovery
Treeipv6-destination-discovery
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
update-interval number
Description

Transmission frequency to maintain the peer address after discovery phase completes

When 0 no maintenance of the peer address once the discovery phase ends.

Contextoam link-measurement measurement-template template-name string stamp ipv6-destination-discovery update-interval number
Treeupdate-interval
Range0 to 3600
Default600
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
profile keyword
Description

The profile or drop precedence

When value not specified, the sgt-qos value will be used

Contextoam link-measurement measurement-template template-name string stamp profile keyword
Treeprofile
Options
  • in

    The second level priority profile

  • out

    The lowest level priotity profile

  • exceed

    The third level priority profile

  • in-plus

    The highest priority profile

ConfigurableTrue
Platforms7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-path
Description Context for the STAMP return-path control
Contextoam link-measurement measurement-template template-name string stamp return-path
Treereturn-path
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source-udp-port number
Description

Automatically allocate or statically configure the source UDP port

When 0 source UDP Port will automatically select an available source UDP port from the dynamic range. Configuring a specific value requires the UDP port to be assigned to the link-measurement application /oam ippm source-udp-port-pools port application-assignment.

Contextoam link-measurement measurement-template template-name string stamp source-udp-port number
Treesource-udp-port
Range0 | 64374 to 64383
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unidirectional-measurement keyword
Description Method used to compute the forward unidirectional delay value
Contextoam link-measurement measurement-template template-name string unidirectional-measurement keyword
Treeunidirectional-measurement
Defaultderived
Options
  • derived

    Computes forward unidirectional measurement using round-trip divide by 2

  • actual

    Computes forward unidirectional measurements using (T2-T1)

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

lsp-ping

Description Container of last ping results for different MPLS and segment routing tunnels
Contextoam lsp-ping
Treelsp-ping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ldp

Description Container of LSP ping results for different LDP tunnels
Contextoam lsp-ping ldp
Treeldp
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the fec

This is the destination that was pinged.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
path-destination
Description Enter the path-destination context
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ip-address (ipv4-address | ipv6-address)
Description IP address of the path destination
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination ip-address (ipv4-address | ipv6-address)
Treeip-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface string
Description Egress router sub-interface used with the path destination
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination subinterface string
Treesubinterface
String Length5 to 25
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence-id number
Description Sequence ID of the probe, starting with 1 and incrementing by 1
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number probe-size number
Treeprobe-size
Range1 to 9500
Default64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mpls-ttl number
Description The value of the MPLS TTL in the top label stack entry of the received echo-reply message
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply mpls-ttl number
Treempls-ttl
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply-sender (ipv4-address | ipv6-address)
Description The IP address of the sender of the echo-reply message
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply reply-sender (ipv4-address | ipv6-address)
Treereply-sender
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-time number
Description The round trip-time between the request and reply for this sequence number or hop
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply round-trip-time number
Treeround-trip-time
Default0
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
request-sent boolean
Description True when it is possible for the datapath to send the request message
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number request-sent boolean
Treerequest-sent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Summary statistics for the test
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description The average round trip-time across all probes
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time average number
Treeaverage
Default0
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description The maximum round trip-time across all probes
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time maximum number
Treemaximum
Default0
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description The minimum round trip-time across all probes
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time minimum number
Treeminimum
Default0
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

sr-isis

Description Container of LSP ping results for different SR-ISIS tunnels
Contextoam lsp-ping sr-isis
Treesr-isis
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that was pinged.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
path-destination
Description Enter the path-destination context
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence-id number
Description Sequence ID of the probe, starting with 1 and incrementing by 1
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number probe-size number
Treeprobe-size
Range1 to 9500
Default64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Summary statistics for the test
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

te-policy

Description Parameters required to ping the endpoint of a TE-Policy tunnel
Contextoam lsp-ping te-policy
Treete-policy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-ping te-policy sr-uncolored
Treesr-uncolored
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policy-name string
Description Name of Uncolored Traffic Engineering Policy to be tested. Any available primary or standby or active secondaty candidate-path can be probed.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
path-destination
Description Enter the path-destination context
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Summary statistics for the test
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

lsp-trace

Description Container of last trace results for different MPLS and segment routing tunnels
Contextoam lsp-trace
Treelsp-trace
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ldp

Description Container of LSP trace results for different LDP tunnels
Contextoam lsp-trace ldp
Treeldp
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the fec

This is the destination that was traced.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hop hop-index number
Description List of hops traced
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hop-index number
Description The hop index, starting at minimum-mpls-ttl and incrementing by 1 up to maximum-mpls-ttl or until the destination is reached
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-index number
Description The probe index, probes received from a given hop. A given LSR may respond one than once, typically once with EgressRouter and once with Destination Router Match Label identifier
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-interface-address (ipv4-address | ipv6-address)
Description The interface address of the next-hop router
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-interface-address (ipv4-address | ipv6-address)
Treedownstream-interface-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-router-address (ipv4-address | ipv6-address)
Description The router ID or interface address of the next-hop router
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-router-address (ipv4-address | ipv6-address)
Treedownstream-router-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
protocol keyword
Description The label distribution protocol for the downstream label
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number protocol keyword
Treeprotocol
Defaultunknown
Options
  • unknown

  • static

  • bgp

  • ldp

  • rsvp-te

  • ospf

  • isis

  • ospfv3

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number probe-size number
Treeprobe-size
Range1 to 9500
Default64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probes-sent number
Description The numnber of echo-request messages sent to the hop until a reply was received
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number probes-sent number
Treeprobes-sent
Range1 to 10
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mpls-ttl number
Description The value of the MPLS TTL in the top label stack entry of the received echo-reply message
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply mpls-ttl number
Treempls-ttl
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
path-destination
Description Enter the path-destination context
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ip-address (ipv4-address | ipv6-address)
Description IP address of the path destination
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination ip-address (ipv4-address | ipv6-address)
Treeip-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface string
Description Egress router sub-interface used with the path destination
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination subinterface string
Treesubinterface
String Length5 to 25
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

sr-isis

Description Container of LSP trace results for different SR-ISIS tunnels
Contextoam lsp-trace sr-isis
Treesr-isis
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that was traced.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hop hop-index number
Description List of hops traced
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hop-index number
Description The hop index, starting at minimum-mpls-ttl and incrementing by 1 up to maximum-mpls-ttl or until the destination is reached
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-index number
Description The probe index, probes received from a given hop. A given LSR may respond one than once, typically once with EgressRouter and once with Destination Router Match Label identifier
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
address-type keyword
Description Indicates the addressing of the downstream interface
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number address-type keyword
Treeaddress-type
Options
  • ipv4-numbered

  • ipv4-unnumbered

  • ipv6-numbered

  • ipv6-unnumbered

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-interface-address (ipv4-address | ipv6-address)
Description The interface address of the next-hop router
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-interface-address (ipv4-address | ipv6-address)
Treedownstream-interface-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-router-address (ipv4-address | ipv6-address)
Description The router ID or interface address of the next-hop router
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-router-address (ipv4-address | ipv6-address)
Treedownstream-router-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
label (number | keyword)
Description MPLS label value
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number label (number | keyword)
Treelabel
Range16 to 1048575
Options
  • IPV4_EXPLICIT_NULL

  • IPV6_EXPLICIT_NULL

  • IMPLICIT_NULL

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
protocol keyword
Description The label distribution protocol for the downstream label
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number protocol keyword
Treeprotocol
Defaultunknown
Options
  • unknown

  • static

  • bgp

  • ldp

  • rsvp-te

  • ospf

  • isis

  • ospfv3

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
path-destination
Description Enter the path-destination context
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

te-policy

Description Parameters required to trace the endpoint of a TE-Policy tunnel
Contextoam lsp-trace te-policy
Treete-policy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-trace te-policy sr-uncolored
Treesr-uncolored
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policy-name string
Description Name of Uncolored Traffic Engineering Policy which is to be traced. Any available primary or standby or active secondaty candidate-path can be traced.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements10
hop hop-index number
Description List of hops traced
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
probe-index number
Description The probe index, probes received from a given hop. A given LSR may respond one than once, typically once with EgressRouter and once with Destination Router Match Label identifier
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
address-type keyword
Description Indicates the addressing of the downstream interface
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number address-type keyword
Treeaddress-type
Options
  • ipv4-numbered

  • ipv4-unnumbered

  • ipv6-numbered

  • ipv6-unnumbered

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-interface-address (ipv4-address | ipv6-address)
Description The interface address of the next-hop router
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-interface-address (ipv4-address | ipv6-address)
Treedownstream-interface-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
downstream-router-address (ipv4-address | ipv6-address)
Description The router ID or interface address of the next-hop router
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-router-address (ipv4-address | ipv6-address)
Treedownstream-router-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
label (number | keyword)
Description MPLS label value
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number label (number | keyword)
Treelabel
Range16 to 1048575
Options
  • IPV4_EXPLICIT_NULL

  • IPV6_EXPLICIT_NULL

  • IMPLICIT_NULL

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
protocol keyword
Description The label distribution protocol for the downstream label
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number protocol keyword
Treeprotocol
Defaultunknown
Options
  • unknown

  • static

  • bgp

  • ldp

  • rsvp-te

  • ospf

  • isis

  • ospfv3

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options
  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options
  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
path-destination
Description Enter the path-destination context
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

performance-monitoring

Description OAM Performance Monitoring
Context oam performance-monitoring
Treeperformance-monitoring
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ethcfm

Description Enter the ethcfm context
Context oam performance-monitoring ethcfm
Treeethcfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay
Description Enter the delay context
Context oam performance-monitoring ethcfm delay
Treedelay
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group bin-group-name string
Description Enter the bin-group list instance
Context oam performance-monitoring ethcfm delay bin-group bin-group-name string
Treebin-group
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group-name string
Description

The name of the bin group

Each performance monitoring session requires a bin-group references. The bin-group includes information on how the delay information is binned and any threshold or exclusion functions. Each performance monitoring session references the bin-group 'default'. The 'default' bin-group is created by the system. Its purpose is to reduce the configuration when the binning of information is not a key requirement for the performance monitoring session. It contains basic values. The bin-type parameters cannot be modified. The following bin-type and lower-bound values are assigned to the bin-group 'default'. These values are microseconds.

bin-type fd bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 } bin 2 { lower-bound 10000 } bin-type fdr bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 } bin-type ifdv bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 }

The bin-group 'default' can be entered in the configuration. It must include the admin-state 'enable'. If entered in the configuration it cannot be deleted if any performance monitoring session is referencing it. The information for the bin-group 'default' is available in state.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-type bin-metric keyword
Description Enter the bin-type list instance
Context oam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword
Treebin-type
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin bin-number number
Description Enter the bin number list instance
Context oam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number
Treebin
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-number number
Description

The number of the bin

The bin values must be contiguous. Space cannot be left between numerical values. If no lower-bound is configured for a bin the default lower-bound will be 1000 microseconds multiplied by the bin number. If this value conflicts with a lower bin number lower-bound value the configuration of an appropriate lower-bound number for the bin must be configured in the same transaction as the addition of the bin to the bin-group.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number
Range0 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
lower-bound number
Description

Lower bound for the bin

The lower-bound value between two adjacent bins represents the range of results that will be mapped to the bin. The lower-bound value for the bin represents the smallest value in the range. The lower-bound value of the adjacent higher bin represents the smallest value in its range.

Bin 0 must have a lower-bound value of '0'. Bin numbers must not have conflicting lower-bound values. Higher bin numbers must not have lower-bound values less than any lower bin number.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number lower-bound number
Treelower-bound
Range0 | 1 to 4294967295
Unitsmicroseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-event direction keyword
Description Enter the delay-event list instance
Context oam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword
Treedelay-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The not be exceeded value used to clear a previously triggered threshold crossing alarm

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

A value '0' means a subsequent measurement interval must have no results in the bins counted against the threshold.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
exclude-lowest-bin number
Description

Lowest bin excluded from the threshold crossing alarm count

This bin must be higher than the ../lowest-bin, which is used to specify which bins to consider for threshold crossing alarms. If the configured bin number does not exist then this leaf have no effect.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword exclude-lowest-bin number
Treeexclude-lowest-bin
Range1 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
lowest-bin number
Description

The lowest bin number to include when comparing counts to thresholds

The number of results in this bin and all higher bins are compared to the configured thresholds. If the configured bin number does not exist then no threshold will be trigger.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword lowest-bin number
Treelowest-bin
Range0 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
raise-threshold number
Description

Raise threshold count for excessive delay

A threshold crossing alarm is raised when the raise-threshold value is reached. The raise threshold is compared to the number of results the ../lowest-bin and all higher, excluding any results that would be excluded by the ../exclude-lowest-bin.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword raise-threshold number
Treeraise-threshold
Range1 to 864000
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
exclude-from-avg direction keyword
Description Enter the exclude-from-avg list instance used to exclude specified bins from their values being included in the average
Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword exclude-from-avg direction keyword
Treeexclude-from-avg
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ethcfm delay bin-group bin-group-name string bin-type bin-metric keyword exclude-from-avg direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss
Description Enter the loss context
Context oam performance-monitoring ethcfm loss
Treeloss
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-events-template loss-events-template-name string
Description The delay-template list instance
Context oam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string
Treeloss-events-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements255
avg-flr-event direction keyword
Description Enter the avg-flr-event list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string avg-flr-event direction keyword
Treeavg-flr-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold decimal-number
Description

The value used to clear a previously triggered Frame Loss Ratio alarm

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string avg-flr-event direction keyword clear-threshold decimal-number
Treeclear-threshold
Range0.000 to 99.999
Unitspercent
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
raise-threshold decimal-number
Description

Raise threshold for the average Frame Loss Ratio

This event is computed and considered at the completion of the measurement interval.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string avg-flr-event direction keyword raise-threshold decimal-number
Treeraise-threshold
Range0.001 to 100.000
Unitspercent
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chli-event direction keyword
Description Enter the Consecutive High Loss Interval list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string chli-event direction keyword
Treechli-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string chli-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string chli-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hli-event direction keyword
Description Enter the High Loss Interval list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string hli-event direction keyword
Treehli-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string hli-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string hli-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unavailability-event direction keyword
Description Enter the unavailability-event list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string unavailability-event direction keyword
Treeunavailability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string unavailability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string unavailability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-availability-event direction keyword
Description Enter the undetermined availability event list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword
Treeundetermined-availability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailability-event direction keyword
Description Enter the undetermined unavailability event list instance
Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword
Treeundetermined-unavailability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ethcfm loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session session-name string
Description Enter the session list instance which contains the test session configuration
Contextoam performance-monitoring ethcfm session session-name string
Treesession
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-name string
Description The name of the OAM-PM session
Context oam performance-monitoring ethcfm session session-name string
String Length1 to 32
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
eth-cfm-single-ended-dmm-test
Description Enter the eth-cfm-single-ended-dmm-test context
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test
Treeeth-cfm-single-ended-dmm-test
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group reference
Description

Reference the bin group to be used for this session

If not specified the 'default' bin-group will be used

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test bin-group reference
Treebin-group
Defaultdefault
Referenceoam performance-monitoring ethcfm delay bin-group bin-group-name string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group-binning keyword
Description

The current binning of delay metric values

A value 'active' means the bin-group being referenced by the test session has an admin-state 'enable'. A value 'inactive' means the bin-group being referenced by the test session has an admin-state 'disable'. When the value is 'inactive' test packets are being transmitted but there is no bin-group to bin the result and the delay results are discarded.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test bin-group-binning keyword
Treebin-group-binning
Options
  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
data-tlv-size number
Description

The Data TLV byte count used to increase the size of the base CFM PDU

A value '0' means no Data TLV is added. Any other value represents the size of the Data TLV.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test data-tlv-size number
Treedata-tlv-size
Range0 | 3 to 9502
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-events bin-metric keyword direction keyword
Description A list of delay events for the measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test delay-events bin-metric keyword direction keyword
Treedelay-events
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test delay-events bin-metric keyword direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description

Operational state of the Threshold Crossing Alerts (TCAs)

The conditions are evaluated in the order shown.

The value 'pending' is returned if the threshold configuration for the specified indices changed during the current measurement interval. The threshold configuration is evaluated in the next full measurement interval after the new configuration.

The value 'active' is returned if the specified indices have a no clear threshold configured (stateless), and the current measurement interval has generated a Raise TCA. The value is also returned if the specified indices have a clear threshold configured (stateful), and the most recent TCA generated was a Raise.

The value 'not-active' is returned for all other conditions (e.g., thresholding is not configured for the specified indices).

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test delay-events bin-metric keyword direction keyword oper-state keyword
Treeoper-state
Options
  • pending

  • active

  • not-active

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
detected-tx-error keyword
Description

Reason for the specified test session's current inability (if any) to launch request frames

For example, 'eth-parent-admin-down(4)' could be returned for a test if the MEP to be tested is associated with a subinterface which is administratively down.

Not all request frame transmit failures are detected by this mechanism. It is possible that the value 'none' will be returned when the test is unable to transmit frames during undetectable transmission errors.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test detected-tx-error keyword
Treedetected-tx-error
Options
  • none

  • port-down

  • no-tx-port

  • eth-parent-admin-down

  • eth-no-mep-or-admin-down

  • unexpected-error

  • network-instance-admin-down

  • network-instance-oper-down

  • no-subinterface

  • no-direct-subinterface

  • source-subinterface-down

  • source-ip-not-local

  • next-hop-ip-is-local

  • dest-mac-resolve-fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-result mi-ro-type keyword
Description The test statistics for a delay measurement
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword
Treemeasurement-result
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description Enter the index list instance
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-type bin-metric keyword
Description Enter the bin-type list instance
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword
Treebin-type
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward
Description Enter the backward context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward
Treebackward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin bin-number number
Description Enter the bin list instance
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number
Treebin
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward-measurements number
Description Number of backward direction delay metric results within the bins range
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number backward-measurements number
Treebackward-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward-measurements number
Description Number of forward direction delay metric results within the bins range
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number forward-measurements number
Treeforward-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-measurements number
Description Number of round trip direction delay metric results within the bins range
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number round-trip-measurements number
Treeround-trip-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward
Description Enter the forward context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward
Treeforward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip
Description Enter the round-trip context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip
Treeround-trip
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
suspect-status boolean
Description

Whether the Measurement Interval has been marked as suspect

The object is to be set to 'false' at the start of a measurement interval. It is set to 'true' when there is a discontinuity in the performance measurements during the Measurement Interval. This flag is used to warn operators if the result count in the measurement interval is suboptimal for considering the results valid. Results are still collected, computed, and stored regardless of this flag. This is meant as a post processing notification to an external system.

Conditions for a discontinuity include, but are not limited to the following:

1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The test is halted before the current Measurement Interval is completed 3 - A local test failure, or reconfiguration that disrupts testing

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test measurement-result mi-ro-type keyword index index number suspect-status boolean
Treesuspect-status
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description Enter the oper-state context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-id (number | keyword)
Description

Test ID of the test session

Test IDs are protocol specific. The same value may be re-used for different protocols but not for the same protocol. When the value 'auto' is configured the test-id is dynamically assigned from the upper 32-bit range, [2147483648..2247483647]

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-dmm-test test-id (number | keyword)
Treetest-id
Range0 to 2147483647
Defaultauto
Options
  • auto

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
eth-cfm-single-ended-slm-test
Description Enter the eth-cfm-single-ended-slm-test context
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test
Treeeth-cfm-single-ended-slm-test
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
data-tlv-size number
Description

The Data TLV byte count used to increase the size of the base CFM PDU

A value '0' means no Data TLV is added. Any other value represents the size of the Data TLV.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test data-tlv-size number
Treedata-tlv-size
Range0 | 3 to 9502
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
detected-tx-error keyword
Description

Reason for the specified test session's current inability (if any) to launch request frames

For example, 'eth-parent-admin-down(4)' could be returned for a test if the MEP to be tested is associated with a subinterface which is administratively down.

Not all request frame transmit failures are detected by this mechanism. It is possible that the value 'none' will be returned when the test is unable to transmit frames during undetectable transmission errors.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test detected-tx-error keyword
Treedetected-tx-error
Options
  • none

  • port-down

  • no-tx-port

  • eth-parent-admin-down

  • eth-no-mep-or-admin-down

  • unexpected-error

  • network-instance-admin-down

  • network-instance-oper-down

  • no-subinterface

  • no-direct-subinterface

  • source-subinterface-down

  • source-ip-not-local

  • next-hop-ip-is-local

  • dest-mac-resolve-fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
flr-threshold number
Description

Frame Loss Ratio (FLR) is a percentage applied to the frame loss within a delta-t

If the FLR is not reached the delta-t is not considered a High Loss Interval. If the FLR is reach the delta-t is considered a High Loss Interval.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test flr-threshold number
Treeflr-threshold
Range0 to 100
Default50
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hli-force-count boolean
Description

Increment High Loss Interval and Consecutive High Loss Interval counters regardless of unavailability

A value 'false' will not increment the HLI/CHLI counters during times of unavailability. A value 'true' will increment the HLI/CHLI counters during times of unavailability.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test hli-force-count boolean
Treehli-force-count
Defaultfalse
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-events loss-metric keyword direction keyword
Description Enter the loss events list instance
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test loss-events loss-metric keyword direction keyword
Treeloss-events
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test loss-events loss-metric keyword direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description

Operational state of the Threshold Crossing Alerts (TCAs) for the specified session

The conditions are evaluated in the order shown.

The value 'pending' is returned if the threshold configuration for the specified indices changed during the current measurement interval.

The value 'active' is returned if the specified indices have a default clear threshold configured, and the current measurement interval has generated a Raise TCA. The value is also returned if the specified indices have a non-default clear threshold configured, and the most recent TCA generated was a Raise.

The value 'not-active' is returned for all other conditions (e.g. thresholding is not configured for the specified indices).

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test loss-events loss-metric keyword direction keyword oper-state keyword
Treeoper-state
Options
  • pending

  • active

  • not-active

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-result mi-ro-type keyword
Description The test statistics for a delay measurement.
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword
Treemeasurement-result
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description Enter the index list instance
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward
Description Enter the backward context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward
Treebackward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average-frame-loss-ratio number
Description Average Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward average-frame-loss-ratio number
Treeaverage-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-high-loss-intervals number
Description Number of Consecutive High Loss Intervals (CHLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward consecutive-high-loss-intervals number
Treeconsecutive-high-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
high-loss-intervals number
Description Number of High Loss Intervals (HLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward high-loss-intervals number
Treehigh-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
in-loss number
Description

Loss in the backward direction

The difference between the received packets on the session-sender and the packets sent from the session-reflector.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward in-loss number
Treein-loss
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum-frame-loss-ratio number
Description Maximum Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward maximum-frame-loss-ratio number
Treemaximum-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum-frame-loss-ratio number
Description Minimum Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward minimum-frame-loss-ratio number
Treeminimum-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unavailable number
Description Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward unavailable number
Treeunavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-available number
Description

Number of availability indicators evaluated as Available for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should be used to adjust the availability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward undetermined-available number
Treeundetermined-available
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailable number
Description

Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should not be used to adjust the unavailability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics backward undetermined-unavailable number
Treeundetermined-unavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward
Description Enter the forward context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward
Treeforward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average-frame-loss-ratio number
Description Average Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward average-frame-loss-ratio number
Treeaverage-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-high-loss-intervals number
Description Number of Consecutive High Loss Intervals (CHLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward consecutive-high-loss-intervals number
Treeconsecutive-high-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
high-loss-intervals number
Description Number of High Loss Intervals (HLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward high-loss-intervals number
Treehigh-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum-frame-loss-ratio number
Description Maximum Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward maximum-frame-loss-ratio number
Treemaximum-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum-frame-loss-ratio number
Description Minimum Frame Loss Ratio (FLR) for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward minimum-frame-loss-ratio number
Treeminimum-frame-loss-ratio
Unitsmillipercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
out-loss number
Description

Loss in the forward direction

The difference between the received packets on the session-reflector and the packets sent from the session-sender.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward out-loss number
Treeout-loss
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unavailable number
Description Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward unavailable number
Treeunavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-available number
Description

Number of availability indicators evaluated as Available for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should be used to adjust the availability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward undetermined-available number
Treeundetermined-available
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailable number
Description

Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should not be used to adjust the unavailability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number statistics forward undetermined-unavailable number
Treeundetermined-unavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
suspect-status boolean
Description

Whether the Measurement Interval has been marked as suspect

The object is to be set to 'false' at the start of a measurement interval. It is set to 'true' when there is a discontinuity in the performance measurements during the Measurement Interval. This flag is used to warn operators if the result count in the measurement interval is suboptimal for considering the results valid. Results are still collected, computed, and stored regardless of this flag. This is meant as a post processing notification to an external system.

Conditions for a discontinuity include, but are not limited to the following:

1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The test is halted before the current Measurement Interval is completed 3 - A local test failure, or reconfiguration that disrupts testing

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test measurement-result mi-ro-type keyword index index number suspect-status boolean
Treesuspect-status
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description Enter the oper-state context
Context oam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-id (number | keyword)
Description

Test ID of the test session

Test IDs are protocol specific. The same value may be re-used for different protocols but not for the same protocol. When the value 'auto' is configured the test-id is dynamically assigned from the upper 32-bit range, [2147483648..2247483647]

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test test-id (number | keyword)
Treetest-id
Range0 to 2147483647
Defaultauto
Options
  • auto

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
timing
Description Enter the timing context used to configure availability options
Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test timing
Treetiming
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chli-threshold number
Description

Consecutive High Loss Interval (CHLI) threshold

The threshold of consecutive delta-ts within a sliding availability window that will cause this counter to increment. The CHLI counter will increment a maximum of one time for any given availability window. The values provide information on the number of consecutive HLIs that occurred in an availability window without meeting the unavailability criteria.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test timing chli-threshold number
Treechli-threshold
Range1 to 9
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-delta-t number
Description

Number of consecutive delta-t that comprise the availability/unavailability sliding window, must not exceed 100 seconds

Availability and unavailability state changes will occur when the sliding window is completely comprised of a different state values than the current state

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test timing consecutive-delta-t number
Treeconsecutive-delta-t
Range2 to 10
Default10
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frames-per-delta-t number
Description

Number of frames that comprise one delta-t used for comparison to FLR configuration

The lenght of the delta-t window is frames-per-delta-t * the probe interval.

Contextoam performance-monitoring ethcfm session session-name string eth-cfm-single-ended-slm-test timing frames-per-delta-t number
Treeframes-per-delta-t
Range1 to 50
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-interval mi-duration keyword
Description The list of measurement intervals associated with the OAM-PM session
Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword
Treemeasurement-interval
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements5
mi-duration keyword
Description

Configure the measurement interval duration

The measurement interval duration defines the length of the sample window over which the statistics are collected, computed, and stored. The system automatically instantiates a 'raw' measurement interval for each defined test session. The 'raw' measurement interval is unbounded and continually accumulates measurements while the test session admin-state has value 'enable'. The 'raw' measurement interval can have result cleared to flush restart the accumulation of statistics.

Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword
Options
  • 1-minute

  • 5-minutes

  • 15-minutes

  • 1-hour

  • 1-day

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
boundary-type keyword
Description

Aligning the start of the measurement interval

A value 'clock-aligned' aligns the start and end of the sample window with the time-of-day clock. A value 'test-aligned' aligns the sample window with the start of the test session.

Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword boundary-type keyword
Treeboundary-type
Defaultclock-aligned
Options
  • clock-aligned

  • test-relative

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clock-offset number
Description

Aligning the measurement interval using an offset for the start, considering the boundary-type

The clock-offset must be '0' when the boundary-type value is not 'clock-aligned'. When the boundary-type is 'clock-aligned' the value of the clock-offset must be less than the duration of the measurement-interval

Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword clock-offset number
Treeclock-offset
Range0 to 86399
Default0
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
intervals-stored number
Description

The number of completed measurement intervals stored in volatile memory before overwriting oldest

The more intervals stored the more memory will be consumed. The values vary per measurement interval duration.

1-minute default 32 maximum 96 5-minutes default 32 maximum 96 15-minutes default 32 maximum 96 1-hour default 24 maximum 24 1-day default 1 maximum 1

The total of 1-minute, plus 5-minutes, plus 15-minutes cannot exceed 96. That is a shared pool between those measurement intervals.

Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword intervals-stored number
Treeintervals-stored
Range1 to 96
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
threshold-alerts
Description Enabling configured events for the measurement interval
Contextoam performance-monitoring ethcfm session session-name string measurement-interval mi-duration keyword threshold-alerts
Treethreshold-alerts
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
priority number
Description The priority used when generating CFM test frames
Contextoam performance-monitoring ethcfm session session-name string priority number
Treepriority
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-type keyword
Description

Session scheduling type for the test sessions configured under this OAM-PM session

A value 'proactive' means the protocol specific test session will be always on when admin-state is 'enable'. A value 'on-demand' requires the tools start command to be issued for test session with admin-state 'enable'

Contextoam performance-monitoring ethcfm session session-name string session-type keyword
Treesession-type
Defaultproactive
Options
  • proactive

  • on-demand

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source
Description Enter the source context
Context oam performance-monitoring ethcfm session session-name string source
Treesource
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
target (unicast-mac-address | number)
Description Target MAC address or remote MEP ID for the test
Contextoam performance-monitoring ethcfm session session-name string target (unicast-mac-address | number)
Treetarget
Range1 to 8191
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

ip

Description Enable the ip context
Context oam performance-monitoring ip
Treeip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay
Description Enter the delay context
Context oam performance-monitoring ip delay
Treedelay
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group bin-group-name string
Description Enter the bin-group list instance
Context oam performance-monitoring ip delay bin-group bin-group-name string
Treebin-group
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group-name string
Description

The name of the bin group

Each performance monitoring session requires a bin-group references. The bin-group includes information on how the delay information is binned and any threshold or exclusion functions. Each performance monitoring session references the bin-group 'default'. The 'default' bin-group is created by the system. Its purpose is to reduce the configuration when the binning of information is not a key requirement for the performance monitoring session. It contains basic values. The bin-type parameters cannot be modified. The following bin-type and lower-bound values are assigned to the bin-group 'default'. These values are microseconds.

bin-type fd bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 } bin 2 { lower-bound 10000 } bin-type fdr bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 } bin-type ifdv bin 0 { lower-bound 0 } bin 1 { lower-bound 5000 }

The bin-group 'default' can be entered in the configuration. It must include the admin-state 'enable'. If entered in the configuration it cannot be deleted if any performance monitoring session is referencing it. The information for the bin-group 'default' is available in state.

Contextoam performance-monitoring ip delay bin-group bin-group-name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-type bin-metric keyword
Description Enter the bin-type list instance
Context oam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword
Treebin-type
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin bin-number number
Description Enter the bin number list instance
Context oam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number
Treebin
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-number number
Description

The number of the bin

The bin values must be contiguous. Space cannot be left between numerical values. If no lower-bound is configured for a bin the default lower-bound will be 1000 microseconds multiplied by the bin number. If this value conflicts with a lower bin number lower-bound value the configuration of an appropriate lower-bound number for the bin must be configured in the same transaction as the addition of the bin to the bin-group.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number
Range0 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
lower-bound number
Description

Lower bound for the bin

The lower-bound value between two adjacent bins represents the range of results that will be mapped to the bin. The lower-bound value for the bin represents the smallest value in the range. The lower-bound value of the adjacent higher bin represents the smallest value in its range.

Bin 0 must have a lower-bound value of '0'. Bin numbers must not have conflicting lower-bound values. Higher bin numbers must not have lower-bound values less than any lower bin number.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword bin bin-number number lower-bound number
Treelower-bound
Range0 | 1 to 4294967295
Unitsmicroseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-event direction keyword
Description Enter the delay-event list instance
Context oam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword
Treedelay-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The not be exceeded value used to clear a previously triggered threshold crossing alarm

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

A value '0' means a subsequent measurement interval must have no results in the bins counted against the threshold.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
exclude-lowest-bin number
Description

Lowest bin excluded from the threshold crossing alarm count

This bin must be higher than the ../lowest-bin, which is used to specify which bins to consider for threshold crossing alarms. If the configured bin number does not exist then this leaf have no effect.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword exclude-lowest-bin number
Treeexclude-lowest-bin
Range1 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
lowest-bin number
Description

The lowest bin number to include when comparing counts to thresholds

The number of results in this bin and all higher bins are compared to the configured thresholds. If the configured bin number does not exist then no threshold will be trigger.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword lowest-bin number
Treelowest-bin
Range0 to 9
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
raise-threshold number
Description

Raise threshold count for excessive delay

A threshold crossing alarm is raised when the raise-threshold value is reached. The raise threshold is compared to the number of results the ../lowest-bin and all higher, excluding any results that would be excluded by the ../exclude-lowest-bin.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword delay-event direction keyword raise-threshold number
Treeraise-threshold
Range1 to 864000
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
exclude-from-avg direction keyword
Description Enter the exclude-from-avg list instance used to exclude specified bins from their values being included in the average
Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword exclude-from-avg direction keyword
Treeexclude-from-avg
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ip delay bin-group bin-group-name string bin-type bin-metric keyword exclude-from-avg direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss
Description Enter the loss context
Context oam performance-monitoring ip loss
Treeloss
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-events-template loss-events-template-name string
Description The delay-template list instance
Context oam performance-monitoring ip loss loss-events-template loss-events-template-name string
Treeloss-events-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements255
avg-flr-event direction keyword
Description Enter the avg-flr-event list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string avg-flr-event direction keyword
Treeavg-flr-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string avg-flr-event direction keyword
Options
  • forward

  • backward

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold decimal-number
Description

The value used to clear a previously triggered Frame Loss Ratio alarm

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string avg-flr-event direction keyword clear-threshold decimal-number
Treeclear-threshold
Range0.000 to 99.999
Unitspercent
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
raise-threshold decimal-number
Description

Raise threshold for the average Frame Loss Ratio

This event is computed and considered at the completion of the measurement interval.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string avg-flr-event direction keyword raise-threshold decimal-number
Treeraise-threshold
Range0.001 to 100.000
Unitspercent
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chli-event direction keyword
Description Enter the Consecutive High Loss Interval list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string chli-event direction keyword
Treechli-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string chli-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string chli-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hli-event direction keyword
Description Enter the High Loss Interval list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string hli-event direction keyword
Treehli-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string hli-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string hli-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
unavailability-event direction keyword
Description Enter the unavailability-event list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string unavailability-event direction keyword
Treeunavailability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string unavailability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string unavailability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-availability-event direction keyword
Description Enter the undetermined availability event list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword
Treeundetermined-availability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-availability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailability-event direction keyword
Description Enter the undetermined unavailability event list instance
Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword
Treeundetermined-unavailability-event
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clear-threshold number
Description

The value used to clear a previously triggered alarm for the metric of interest

Two type of threshold crossing alarms; Stateless and Stateful. When the clear-threshold is not specified the type = stateless. Stateless alarms are not maintained across measurement interval boundaries. Each measurement interval is self-contained. When a clear-threshold is configured the type = stateful. Stateful alarms are maintained across measurement interval boundaries and cleared when a subsequent measurement interval completes and meets the clear threshold criteria.

Contextoam performance-monitoring ip loss loss-events-template loss-events-template-name string undetermined-unavailability-event direction keyword clear-threshold number
Treeclear-threshold
Range0 to 863999
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session session-name string
Description Enter the session list instance which contains the test session configuration
Contextoam performance-monitoring ip session session-name string
Treesession
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-name string
Description The name of the OAM-PM session
Context oam performance-monitoring ip session session-name string
String Length1 to 32
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
destination-ip (ipv4-address | ipv6-address)
Description Destination IP address for the IP test session
Contextoam performance-monitoring ip session session-name string destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dscp (number | keyword)
Description DSCP used in IP header of the STAMP PDU
Contextoam performance-monitoring ip session session-name string dscp (number | keyword)
Treedscp
Range0 to 63
DefaultCS6
Options
  • CS0

  • LE

  • CS1

  • AF11

  • AF12

  • AF13

  • CS2

  • AF21

  • AF22

  • AF23

  • CS3

  • AF31

  • AF32

  • AF33

  • CS4

  • AF41

  • AF42

  • AF43

  • CS5

  • EF

  • CS6

  • CS7

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forwarding
Description Control the local forwarding decision on the source
Contextoam performance-monitoring ip session session-name string forwarding
Treeforwarding
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface-ref
Description Enter the interface-ref context
Context oam performance-monitoring ip session session-name string forwarding interface-ref
Treeinterface-ref
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
next-hop (ipv4-address | ipv6-address)
Description

IP address of the next hop

The next hop must have a valid route in the route-table of the network instance.

Contextoam performance-monitoring ip session session-name string forwarding next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forwarding-class reference
Description

The forwarding class

When value not specified, the sgt-qos value will be used

Contextoam performance-monitoring ip session session-name string forwarding-class reference
Treeforwarding-class
Referenceqos forwarding-classes forwarding-class name string
ConfigurableTrue
Platforms7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-interval mi-duration keyword
Description The list of measurement intervals associated with the OAM-PM session
Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword
Treemeasurement-interval
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements5
mi-duration keyword
Description

Configure the measurement interval duration

The measurement interval duration defines the length of the sample window over which the statistics are collected, computed, and stored. The system automatically instantiates a 'raw' measurement interval for each defined test session. The 'raw' measurement interval is unbounded and continually accumulates measurements while the test session admin-state has value 'enable'. The 'raw' measurement interval can have result cleared to flush restart the accumulation of statistics.

Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword
Options
  • 1-minute

  • 5-minutes

  • 15-minutes

  • 1-hour

  • 1-day

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
boundary-type keyword
Description

Aligning the start of the measurement interval

A value 'clock-aligned' aligns the start and end of the sample window with the time-of-day clock. A value 'test-aligned' aligns the sample window with the start of the test session.

Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword boundary-type keyword
Treeboundary-type
Defaultclock-aligned
Options
  • clock-aligned

  • test-relative

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
clock-offset number
Description

Aligning the measurement interval using an offset for the start, considering the boundary-type

The clock-offset must be '0' when the boundary-type value is not 'clock-aligned'. When the boundary-type is 'clock-aligned' the value of the clock-offset must be less than the duration of the measurement-interval

Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword clock-offset number
Treeclock-offset
Range0 to 86399
Default0
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
intervals-stored number
Description

The number of completed measurement intervals stored in volatile memory before overwriting oldest

The more intervals stored the more memory will be consumed. The values vary per measurement interval duration.

1-minute default 32 maximum 96 5-minutes default 32 maximum 96 15-minutes default 32 maximum 96 1-hour default 24 maximum 24 1-day default 1 maximum 1

The total of 1-minute, plus 5-minutes, plus 15-minutes cannot exceed 96. That is a shared pool between those measurement intervals.

Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword intervals-stored number
Treeintervals-stored
Range1 to 96
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
threshold-alerts
Description Enabling configured events for the measurement interval
Contextoam performance-monitoring ip session session-name string measurement-interval mi-duration keyword threshold-alerts
Treethreshold-alerts
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
profile keyword
Description

The profile or drop precedence

When value not specified, the sgt-qos value will be used

Contextoam performance-monitoring ip session session-name string profile keyword
Treeprofile
Options
  • in

    The second level priority profile

  • out

    The lowest level priotity profile

  • exceed

    The third level priority profile

  • in-plus

    The highest priority profile

ConfigurableTrue
Platforms7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-type keyword
Description

Session scheduling type for the test sessions configured under this OAM-PM session

A value 'proactive' means the protocol specific test session will be always on when admin-state is 'enable'. A value 'on-demand' requires the tools start command to be issued for test session with admin-state 'enable'

Contextoam performance-monitoring ip session session-name string session-type keyword
Treesession-type
Defaultproactive
Options
  • proactive

  • on-demand

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source-ip (ipv4-address | ipv6-address)
Description Source IPv4 or IPv6 IP address to be used as the source address of the packet
Contextoam performance-monitoring ip session session-name string source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source-udp-port number
Description

Automatically allocate or statically configure the source UDP port for oam pm ip

The value 0 will automatically select an available source UDP port from the dynamic range. When selecting a source UDP port from the from the reserved STAMP pool [64374..64383] that port must be administratively assigned to the STAMP application attempting to use it. Once a UDP port in this range is assigned to one application it cannot be used by the other application. When a test has been configured to use one of UDP ports from the reserved STAMP pool the application-assignment of that UDP port cannot be modified.

Allocation of these UDP ports can be found at srl_nokia-udp-source-pool.yang model (path oam ippm source-udp-pools).

Contextoam performance-monitoring ip session session-name string source-udp-port number
Treesource-udp-port
Range0 | 64374 to 64383
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
stamp
Description Enter the stamp context
Context oam performance-monitoring ip session session-name string stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay
Description Enter the delay context
Context oam performance-monitoring ip session session-name string stamp delay
Treedelay
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-group-binning keyword
Description

The current binning of delay metric values

A value 'active' means the bin-group being referenced by the test session has an admin-state 'enable'. A value 'inactive' means the bin-group being referenced by the test session has an admin-state 'disable'. When the value is 'inactive' test packets are being transmitted but there is no bin-group to bin the result and the delay results are discarded.

Contextoam performance-monitoring ip session session-name string stamp delay bin-group-binning keyword
Treebin-group-binning
Options
  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-events bin-metric keyword direction keyword
Description A list of delay events for the measurement interval
Contextoam performance-monitoring ip session session-name string stamp delay delay-events bin-metric keyword direction keyword
Treedelay-events
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'round-trip' is the measurement of the complete path using four timestamps.

Contextoam performance-monitoring ip session session-name string stamp delay delay-events bin-metric keyword direction keyword
Options
  • forward

  • backward

  • round-trip

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description

Operational state of the Threshold Crossing Alerts (TCAs)

The conditions are evaluated in the order shown.

The value 'pending' is returned if the threshold configuration for the specified indices changed during the current measurement interval. The threshold configuration is evaluated in the next full measurement interval after the new configuration.

The value 'active' is returned if the specified indices have a no clear threshold configured (stateless), and the current measurement interval has generated a Raise TCA. The value is also returned if the specified indices have a clear threshold configured (stateful), and the most recent TCA generated was a Raise.

The value 'not-active' is returned for all other conditions (e.g., thresholding is not configured for the specified indices).

Contextoam performance-monitoring ip session session-name string stamp delay delay-events bin-metric keyword direction keyword oper-state keyword
Treeoper-state
Options
  • pending

  • active

  • not-active

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-result mi-ro-type keyword
Description The test statistics for a delay measurement
Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword
Treemeasurement-result
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description Enter the index list instance
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin-type bin-metric keyword
Description Enter the bin-type list instance
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword
Treebin-type
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward
Description Enter the backward context
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward
Treebackward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric in the backward direction, from reflector to source

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword backward minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bin bin-number number
Description Enter the bin list instance
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number
Treebin
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward-measurements number
Description Number of backward direction delay metric results within the bins range
Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number backward-measurements number
Treebackward-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward-measurements number
Description Number of forward direction delay metric results within the bins range
Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number forward-measurements number
Treeforward-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip-measurements number
Description Number of round trip direction delay metric results within the bins range
Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword bin bin-number number round-trip-measurements number
Treeround-trip-measurements
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward
Description Enter the forward context
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward
Treeforward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric in the forward direction, from source to reflector

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword forward minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
round-trip
Description Enter the round-trip context
Context oam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip
Treeround-trip
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
average number
Description

Average delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip average number
Treeaverage
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum number
Description

Maximum delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip maximum number
Treemaximum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
minimum number
Description

Minimum delay metric round trip, source computed based on four timestamps

This is for the specific direction, test session, interval duration, interval number, and bin type.

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number statistics bin-type bin-metric keyword round-trip minimum number
Treeminimum
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
suspect-status boolean
Description

Whether the Measurement Interval has been marked as suspect

The object is to be set to 'false' at the start of a measurement interval. It is set to 'true' when there is a discontinuity in the performance measurements during the Measurement Interval. This flag is used to warn operators if the result count in the measurement interval is suboptimal for considering the results valid. Results are still collected, computed, and stored regardless of this flag. This is meant as a post processing notification to an external system.

Conditions for a discontinuity include, but are not limited to the following:

1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The test is halted before the current Measurement Interval is completed 3 - A local test failure, or reconfiguration that disrupts testing

Contextoam performance-monitoring ip session session-name string stamp delay measurement-result mi-ro-type keyword index index number suspect-status boolean
Treesuspect-status
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
detected-tx-error keyword
Description

Reason for the specified test session's current inability (if any) to launch request frames

For example, 'eth-parent-admin-down(4)' could be returned for a test if the MEP to be tested is associated with a subinterface which is administratively down.

Not all request frame transmit failures are detected by this mechanism. It is possible that the value 'none' will be returned when the test is unable to transmit frames during undetectable transmission errors.

Contextoam performance-monitoring ip session session-name string stamp detected-tx-error keyword
Treedetected-tx-error
Options
  • none

  • port-down

  • no-tx-port

  • eth-parent-admin-down

  • eth-no-mep-or-admin-down

  • unexpected-error

  • network-instance-admin-down

  • network-instance-oper-down

  • no-subinterface

  • no-direct-subinterface

  • source-subinterface-down

  • source-ip-not-local

  • next-hop-ip-is-local

  • dest-mac-resolve-fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interval keyword
Description The transmission rate of the STAMP packets
Contextoam performance-monitoring ip session session-name string stamp interval keyword
Treeinterval
Default1s
Options
  • 50ms

  • 100ms

  • 200ms

  • 300ms

  • 400ms

  • 500ms

  • 600ms

  • 700ms

  • 800ms

  • 900ms

  • 1s

  • 10s

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss
Description Enter the loss context
Context oam performance-monitoring ip session session-name string stamp loss
Treeloss
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
flr-threshold number
Description

Frame Loss Ratio (FLR) is a percentage applied to the frame loss within a delta-t

If the FLR is not reached the delta-t is not considered a High Loss Interval. If the FLR is reach the delta-t is considered a High Loss Interval.

Contextoam performance-monitoring ip session session-name string stamp loss flr-threshold number
Treeflr-threshold
Range0 to 100
Default50
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
hli-force-count boolean
Description

Increment High Loss Interval and Consecutive High Loss Interval counters regardless of unavailability

A value 'false' will not increment the HLI/CHLI counters during times of unavailability. A value 'true' will increment the HLI/CHLI counters during times of unavailability.

Contextoam performance-monitoring ip session session-name string stamp loss hli-force-count boolean
Treehli-force-count
Defaultfalse
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-events loss-metric keyword direction keyword
Description Enter the loss events list instance
Context oam performance-monitoring ip session session-name string stamp loss loss-events loss-metric keyword direction keyword
Treeloss-events
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
direction keyword
Description

The direction of the measurement of interest

A value 'forward' is the measurement from source to reflector. A value 'backward' is the measurement from reflector to source. A value 'aggregate' sums the forward and backward counts into an aggregate.

Contextoam performance-monitoring ip session session-name string stamp loss loss-events loss-metric keyword direction keyword
Options
  • forward

  • backward

  • aggregate

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description

Operational state of the Threshold Crossing Alerts (TCAs) for the specified session

The conditions are evaluated in the order shown.

The value 'pending' is returned if the threshold configuration for the specified indices changed during the current measurement interval.

The value 'active' is returned if the specified indices have a default clear threshold configured, and the current measurement interval has generated a Raise TCA. The value is also returned if the specified indices have a non-default clear threshold configured, and the most recent TCA generated was a Raise.

The value 'not-active' is returned for all other conditions (e.g. thresholding is not configured for the specified indices).

Contextoam performance-monitoring ip session session-name string stamp loss loss-events loss-metric keyword direction keyword oper-state keyword
Treeoper-state
Options
  • pending

  • active

  • not-active

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measurement-result mi-ro-type keyword
Description The test statistics for a delay measurement
Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword
Treemeasurement-result
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
index index number
Description Enter the index list instance
Context oam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
backward
Description Enter the backward context
Context oam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics backward
Treebackward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-high-loss-intervals number
Description Number of Consecutive High Loss Intervals (CHLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics backward consecutive-high-loss-intervals number
Treeconsecutive-high-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
in-loss number
Description

Loss in the backward direction

The difference between the received packets on the session-sender and the packets sent from the session-reflector.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics backward in-loss number
Treein-loss
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-available number
Description

Number of availability indicators evaluated as Available for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should be used to adjust the availability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics backward undetermined-available number
Treeundetermined-available
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailable number
Description

Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should not be used to adjust the unavailability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics backward undetermined-unavailable number
Treeundetermined-unavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
forward
Description Enter the forward context
Context oam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics forward
Treeforward
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-high-loss-intervals number
Description Number of Consecutive High Loss Intervals (CHLIs) for the specified direction and measurement interval
Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics forward consecutive-high-loss-intervals number
Treeconsecutive-high-loss-intervals
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
out-loss number
Description

Loss in the forward direction

The difference between the received packets on the session-reflector and the packets sent from the session-sender.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics forward out-loss number
Treeout-loss
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-available number
Description

Number of availability indicators evaluated as Available for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should be used to adjust the availability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics forward undetermined-available number
Treeundetermined-available
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
undetermined-unavailable number
Description

Number of availability indicators evaluated as Unavailable for the specified direction and measurement interval, based on extrapolation

Undetermined counters are incremented when there is no explicit understanding why a response packet was not received. This will occur during a complete failure where no responses are received on the source and the source must time out those missing responses. This counter will increment when the availability window has been reached plus an additional five second timeout. Previous state must be maintained but the appropriate undetermined counter will increment by the equal value. This value should not be used to adjust the unavailability counter if the reason was packet loss and not an administrative function that caused the condition.

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number statistics forward undetermined-unavailable number
Treeundetermined-unavailable
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
suspect-status boolean
Description

Whether the Measurement Interval has been marked as suspect

The object is to be set to 'false' at the start of a measurement interval. It is set to 'true' when there is a discontinuity in the performance measurements during the Measurement Interval. This flag is used to warn operators if the result count in the measurement interval is suboptimal for considering the results valid. Results are still collected, computed, and stored regardless of this flag. This is meant as a post processing notification to an external system.

Conditions for a discontinuity include, but are not limited to the following:

1 - The local time-of-day clock is adjusted by at least 10 seconds 2 - The test is halted before the current Measurement Interval is completed 3 - A local test failure, or reconfiguration that disrupts testing

Contextoam performance-monitoring ip session session-name string stamp loss measurement-result mi-ro-type keyword index index number suspect-status boolean
Treesuspect-status
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
timing
Description Enter the timing context used to configure availability options
Contextoam performance-monitoring ip session session-name string stamp loss timing
Treetiming
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
chli-threshold number
Description

Consecutive High Loss Interval (CHLI) threshold

The threshold of consecutive delta-ts within a sliding availability window that will cause this counter to increment. The CHLI counter will increment a maximum of one time for any given availability window. The values provide information on the number of consecutive HLIs that occurred in an availability window without meeting the unavailability criteria.

Contextoam performance-monitoring ip session session-name string stamp loss timing chli-threshold number
Treechli-threshold
Range1 to 9
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
consecutive-delta-t number
Description

Number of consecutive delta-t that comprise the availability/unavailability sliding window, must not exceed 100 seconds

Availability and unavailability state changes will occur when the sliding window is completely comprised of a different state values than the current state

Contextoam performance-monitoring ip session session-name string stamp loss timing consecutive-delta-t number
Treeconsecutive-delta-t
Range2 to 10
Default10
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frames-per-delta-t number
Description

Number of frames that comprise one delta-t used for comparison to FLR configuration

The lenght of the delta-t window is frames-per-delta-t * the probe interval.

Contextoam performance-monitoring ip session session-name string stamp loss timing frames-per-delta-t number
Treeframes-per-delta-t
Range1 to 50
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description Enter the oper-state context
Context oam performance-monitoring ip session session-name string stamp oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
pad-tlv-size number
Description

The PAD TLV byte count used to increase the size of the base STAMP PDU

A value '0' means no PAD TLV is added. Any other value represents the size of the PAD TLV.

Contextoam performance-monitoring ip session session-name string stamp pad-tlv-size number
Treepad-tlv-size
Range0 | 3 to 9502
Default0
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam performance-monitoring ip session session-name string stamp statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-duration number
Description

Duration of an OAM-PM session with a session-type on-demand

When this leaf is not specified the on-demand test will execute until manually stopped.

Contextoam performance-monitoring ip session session-name string stamp test-duration number
Treetest-duration
Range1 to 86400
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-id (number | keyword)
Description

Test ID of the test session

Test IDs are protocol specific. The same value may be re-used for different protocols but not for the same protocol. When the value 'auto' is configured the test-id is dynamically assigned from the upper 32-bit range, [2147483648..2247483647]

Contextoam performance-monitoring ip session session-name string stamp test-id (number | keyword)
Treetest-id
Range0 to 2147483647
Defaultauto
Options
  • auto

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ttl number
Description TTL value for the IP packet
Context oam performance-monitoring ip session session-name string ttl number
Treettl
Range1 to 255
Default255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

service-activation-testhead

Description Enter the service-activation-testhead context
Contextoam service-activation-testhead
Treeservice-activation-testhead
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

acceptance-criteria-template ac-template-name string

Description Enter the acceptance-criteria-template list instance
Contextoam service-activation-testhead acceptance-criteria-template ac-template-name string
Treeacceptance-criteria-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements100

frame-size-template fs-template-name string

Description Enter the frame-size-template list instance
Contextoam service-activation-testhead frame-size-template fs-template-name string
Treeframe-size-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements100

results

Description Enter the service-activation-testhead context
Contextoam service-activation-testhead results
Treeresults
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
service-test test-name string
Description Enter the service-test list instance
Context oam service-activation-testhead results service-test test-name string
Treeservice-test
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-name string
Description Service activation test name
Context oam service-activation-testhead results service-test test-name string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam service-activation-testhead results statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
service-test test-name string test-run number
Description Enter the service-test list instance
Context oam service-activation-testhead results statistics service-test test-name string test-run number
Treeservice-test
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
service-stream stream-id number
Description Enter the service-stream list instance
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number
Treeservice-stream
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
cir-threshold number
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/cir-threshold when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number cir-threshold number
Treecir-threshold
Range0 to 400000000
Unitskilobps
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-threshold number
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/delay-threshold when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number delay-threshold number
Treedelay-threshold
Range0 to 100000000
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
delay-var-threshold number
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/delay-var-threshold when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number delay-var-threshold number
Treedelay-var-threshold
Range0 to 100000000
Unitsmicroseconds
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frame-mix
Description Enter the frame-mix context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-mix
Treeframe-mix
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frame-payload
Description Enter the frame-payload context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload
Treeframe-payload
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
data-pattern
Description Enter the data-pattern context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload data-pattern
Treedata-pattern
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ethernet
Description Enter the ethernet context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload ethernet
Treeethernet
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
c-tag
Description Enter the c-tag context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload ethernet c-tag
Treec-tag
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
eth-cfm
Description Enter the eth-cfm context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload ethernet eth-cfm
Treeeth-cfm
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source
Description Enter the source context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload ethernet eth-cfm source
Treesource
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
s-tag
Description Enter the s-tag context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number frame-payload ethernet s-tag
Trees-tag
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface string
Description

The interface name

This can be configured in one of two forms. Fully qualified reference to an interface subinterface, example ethernet-1/1.1, or symbolic alias, example interface-1. When the fully qualified name is specified the 'interface-ref' should not be configured. When the symbolic alias is specified the 'interface-ref' must be configured.

Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number interface string
Treeinterface
String Length1 to 255
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface-ref
Description Reference to interface subinterface when symbolic alias is configured under the interface list
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number interface-ref
Treeinterface-ref
ConfigurableFalse
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
interface reference
Description Reference to a base interface
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number interface-ref interface reference
Treeinterface
Referenceinterface name string
ConfigurableFalse
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
subinterface reference
Description Reference to the associated subinterface in network-instance
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number interface-ref subinterface reference
Treesubinterface
Referenceinterface name string subinterface index number
ConfigurableFalse
Platforms7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-threshold (decimal-number | keyword)
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/loss-threshold when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number loss-threshold (decimal-number | keyword)
Treeloss-threshold
Range0.0000 to 100.0000
Default0.0000
Options
  • none

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
loss-threshold-policing (decimal-number | keyword)
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/loss-threshold-policing when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number loss-threshold-policing (decimal-number | keyword)
Treeloss-threshold-policing
Range0.0000 to 100.0000
Default0.0000
Options
  • none

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
network-instance reference
Description Indicates the router which hosts the Eth-CFM MEP, Domain, and Association configured for the service stream
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number network-instance reference
Treenetwork-instance
Referencenetwork-instance name string
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
pir-threshold number
Description Indicates the value of /test-oam/service-activation-testhead/acceptance-criteria-template/pir-threshold when the test run started
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number pir-threshold number
Treepir-threshold
Range0 to 400000000
Unitskilobps
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-results test-type keyword
Description Enter the test-results list instance
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword
Treetest-results
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
measured-frame-loss-ratio decimal-number
Description Indicates the measured FLR for the test run
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword measured-frame-loss-ratio decimal-number
Treemeasured-frame-loss-ratio
Range0.0000 to 100.0000
Unitspercent
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-status-delay keyword
Description Indicates the test run's operational status, with respect to the delay acceptance criteria
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword oper-status-delay keyword
Treeoper-status-delay
Options
  • unknown

  • pass

  • fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-status-delay-var keyword
Description Indicates the test run's operational status, with respect to the delay variation acceptance criteria
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword oper-status-delay-var keyword
Treeoper-status-delay-var
Options
  • unknown

  • pass

  • fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-status-frame-loss-ratio keyword
Description Indicates the test run's operational status, with respect to the FLR acceptance criteria
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword oper-status-frame-loss-ratio keyword
Treeoper-status-frame-loss-ratio
Options
  • unknown

  • pass

  • fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-status-throughput keyword
Description Indicates the test run's operational status, with respect to the throughput acceptance criteria
Contextoam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-results test-type keyword oper-status-throughput keyword
Treeoper-status-throughput
Options
  • unknown

  • pass

  • fail

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-types
Description Enter the test-types context
Context oam service-activation-testhead results statistics service-test test-name string test-run number service-stream stream-id number test-types
Treetest-types
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-duration
Description Enter the test-duration context
Context oam service-activation-testhead results statistics service-test test-name string test-run number test-duration
Treetest-duration
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
cir
Description Enter the cir context
Context oam service-activation-testhead results statistics service-test test-name string test-run number test-duration cir
Treecir
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
cir-pir
Description Enter the cir-pir context
Context oam service-activation-testhead results statistics service-test test-name string test-run number test-duration cir-pir
Treecir-pir
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
performance
Description Enter the performance context
Context oam service-activation-testhead results statistics service-test test-name string test-run number test-duration performance
Treeperformance
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policing
Description Enter the policing context
Context oam service-activation-testhead results statistics service-test test-name string test-run number test-duration policing
Treepolicing
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

service-test test-name string

Description Enter the service-test list instance
Context oam service-activation-testhead service-test test-name string
Treeservice-test
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
Max. Elements500
test-name string
Description Service activation test name
Context oam service-activation-testhead service-test test-name string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
service-stream stream-id number
Description Enter the service-stream list instance
Contextoam service-activation-testhead service-test test-name string service-stream stream-id number
Treeservice-stream
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
acceptance-criteria-template reference
Description Acceptance criteria association to a service stream
Contextoam service-activation-testhead service-test test-name string service-stream stream-id number acceptance-criteria-template reference
Treeacceptance-criteria-template
Referenceoam service-activation-testhead acceptance-criteria-template ac-template-name string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frame-mix
Description Enter the frame-mix context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-mix
Treeframe-mix
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
frame-payload
Description Enter the frame-payload context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload
Treeframe-payload
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
data-pattern
Description Enter the data-pattern context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload data-pattern
Treedata-pattern
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ethernet
Description Enter the ethernet context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet
Treeethernet
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
c-tag
Description Enter the c-tag context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet c-tag
Treec-tag
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
eth-cfm
Description Enter the eth-cfm context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet eth-cfm
Treeeth-cfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
source
Description Enter the source context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet eth-cfm source
Treesource
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
association-id reference
Description The maintenance association identifier specific to the domain identifier
Contextoam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet eth-cfm source association-id reference
Treeassociation-id
Referenceoam ethcfm domain domain-id string association association-id string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
mep-id reference
Description The MEP identifier specific to the domain and association identifier
Contextoam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet eth-cfm source mep-id reference
Treemep-id
Referenceoam ethcfm domain domain-id string association association-id string mep mep-id reference
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
s-tag
Description Enter the s-tag context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number frame-payload ethernet s-tag
Trees-tag
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-types
Description Enter the test-types context
Context oam service-activation-testhead service-test test-name string service-stream stream-id number test-types
Treetest-types
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-duration
Description Enter the test-duration context
Context oam service-activation-testhead service-test test-name string test-duration
Treetest-duration
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
cir
Description Enter the cir context
Context oam service-activation-testhead service-test test-name string test-duration cir
Treecir
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
cir-pir
Description Enter the cir-pir context
Context oam service-activation-testhead service-test test-name string test-duration cir-pir
Treecir-pir
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
performance
Description Enter the performance context
Context oam service-activation-testhead service-test test-name string test-duration performance
Treeperformance
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
policing
Description Enter the policing context
Context oam service-activation-testhead service-test test-name string test-duration policing
Treepolicing
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

stamp

Description Enable the stamp context
Context oam stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

session-reflector

Description STAMP Session-Reflector configuration and state
Contextoam stamp session-reflector
Treesession-reflector
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
inactivity-timer number
Description

STAMP test session timeout on inactivity

The amount of time (ref-wait) a test session must be inactive, no packets arriving, before the test session is removed from the Session-Reflector stateful table.

Contextoam stamp session-reflector inactivity-timer number
Treeinactivity-timer
Range1 to 604800
Default900
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
network-instance name reference
Description The list of network instances configured for STAMP Session-Reflector function
Contextoam stamp session-reflector network-instance name reference
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name reference
Description The name of the network instances to which the Session-Reflector state and configuration applies
Contextoam stamp session-reflector network-instance name reference
Referencenetwork-instance name string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
admin-state keyword
Description This attribute specifies whether the STAMP Session-Reflector is enabled or disabled
Contextoam stamp session-reflector network-instance name reference admin-state keyword
Treeadmin-state
Defaultdisable
Options
  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
description string
Description A string describing the STAMP Session-Reflector
Contextoam stamp session-reflector network-instance name reference description string
Treedescription
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
Description The list of IP source addresses or ranges allowed to send STAMP test packets to Session-Reflector
Contextoam stamp session-reflector network-instance name reference ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
Treeip-prefix
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
ip-prefix (ipv4-prefix | ipv6-prefix)
Description The IP address or range allowed to send STAMP test packets to the Session-Reflector
Contextoam stamp session-reflector network-instance name reference ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description Enter the oper-state context
Context oam stamp session-reflector network-instance name reference oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam stamp session-reflector network-instance name reference statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
malformed-packet number
Description

Session-Reflector was able to identify STAMP test packet but the packet was incorrectly formatted, packet discarded

This counter will be increased if the malformation affects the mapping of the test packet to the test session. This would be the case where the session cannot be identified.

Contextoam stamp session-reflector network-instance name reference statistics malformed-packet number
Treemalformed-packet
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
packet-discards-source-destination-equal number
Description

Session-Reflector discarded the received test packet because source IP and destination IP are the same

The test session is never created in the case where source IP and destination IP are the same.

Contextoam stamp session-reflector network-instance name reference statistics packet-discards-source-destination-equal number
Treepacket-discards-source-destination-equal
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
Description The per test session statistics
Context oam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
Treetest-session-statistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-sender-ip (ipv4-address | ipv6-address)
Description The Source IP address of the Session-Sender
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-sender-udp number
Description The Source UDP address of the Session-Sender
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-reflector-ip (ipv4-address | ipv6-address)
Description The Destination IP address in the Session-Sender STAMP test packet, an IP on the Session-Reflector
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-reflector-udp number
Description The Destination UDP address in the Session-Sender STAMP test packet, the listening port on the Session-Reflector
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
stamp-session-identifier number
Description The SSID in the Session-Sender STAMP test packet
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
current-ref-wait number
Description The current value of the ref wait time for the test session
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number current-ref-wait number
Treecurrent-ref-wait
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-sequence-number-received number
Description The last sequence number received in the Session-Sender test packet
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number last-sequence-number-received number
Treelast-sequence-number-received
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-sequence-number-transmitted number
Description The last sequence number transmitted in the Session-Reflector test packet
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number last-sequence-number-transmitted number
Treelast-sequence-number-transmitted
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
malformed-tlv number
Description

Session-Reflector was able to identify STAMP test packet but the packet was incorrectly formatted, packet discarded

This counter will be increased if the malformation does not affect the mapping of the test packet to the test session. This would be the case if a TLV is malformed.

Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number malformed-tlv number
Treemalformed-tlv
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-frames-received number
Description STAMP test frames received
Context oam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number test-frames-received number
Treetest-frames-received
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-frames-sent number
Description STAMP test frames transmitted
Context oam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number stamp-session-identifier number test-frames-sent number
Treetest-frames-sent
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
udp-port number
Description The UDP Port listening port of the STAMP Session-Reflector
Contextoam stamp session-reflector network-instance name reference udp-port number
Treeudp-port
Range862 | 64364 to 64373
Default862
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam stamp session-reflector statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-reflector-not-found number
Description

Session-Sender is sending to a destination UDP port that is not part of the Session-Reflector

The Session-Reflector has not allocated the UDP port for this network instance reflector. This counter may increase when the Session-Reflector is deleted and packets for that specific Session-Reflector had been queued for processing. This counter does not increment when there is failure to map UDP port to the STAMP protocol.

Contextoam stamp session-reflector statistics session-reflector-not-found number
Treesession-reflector-not-found
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

twamp

Description Enable the twamp context
Context oam twamp
Treetwamp
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

server

Description Configuration of the TWAMP Server logical entity
Contextoam twamp server
Treeserver
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
network-instance name reference
Description Enter the network-instance list instance
Contextoam twamp server network-instance name reference
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
name reference
Description The name of the TWAMP Server network instance
Contextoam twamp server network-instance name reference
Referencenetwork-instance name string
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
admin-state keyword
Description

TWAMP Server administrative state

A value 'enable' administratively starts the Server and Session-Reflector. A value 'disable' administratively stops the Server and Session-Reflector, dropping any active TWAMP-Control channels and terminating all TWAMP-Test sessions.

Contextoam twamp server network-instance name reference admin-state keyword
Treeadmin-state
Defaultdisable
Options
  • enable

  • disable

Configurable True
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
client-connection prefix (ipv4-prefix | ipv6-prefix)
Description List of TWAMP Client IP prefixes that can establish TWAMP-Control connections with the Server
Contextoam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix)
Treeclient-connection
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
prefix (ipv4-prefix | ipv6-prefix)
Description A TWAMP Client IP prefix the Server will accept TWAMP-Control connections from
Contextoam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix) statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number
Description List TWAMP-Control (TCP) connections
Context oam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number
Treecontrol-connection
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
control-packet-dscp number
Description The DSCP value used in the IP header of the TWAMP-Control (TCP) packets sent by the Server
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number control-packet-dscp number
Treecontrol-packet-dscp
Range0 to 63
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
selected-mode keyword
Description The TWAMP Mode chosen in the Mode field of the TWAMP Set-Up-Response message
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number selected-mode keyword
Treeselected-mode
Options
  • unauthenticated

    No encryption or authentication is applied in TWAMP-Control and TWAMP-Test

  • authenticated

    Control-Client and Server pass a shared secret for authentication

  • encrypted

    Additional level of protection using encryption

  • unauth-test-encrypt-control

    Mixed Security Mode, the TWAMP-Test uses unauthenticated mode and TWAMP-Control uses encrypted mode

  • individual-session-control

    Individual TWAMP-Test sessions start and stop using individual session identifiers

    This allows TWAMP-Test sessions using the same control channel to be started individually instead of using the bulk all sessions start.

  • reflect-octets

    Reflect octets capability

  • symmetrical-size

    Symmetrical size for test packets between Session-Sender and Session-Reflector

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
state keyword
Description Indicates the Server TWAMP-Control connection state
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number state keyword
Treestate
Options
  • active

    TWAMP-Control connection between the Server and the Control-Client is active

    Packets are arriving on the TWAMP-Control channel or there are active TWAMP-Test sessions on the TWAMP-Control channel.

  • servwait

    TWAMP-Control connection between the Server and the Control-Client is in SERVWAIT

    This state is entered when no there are no TWAMP-Control messages between the Control-Client and Server and all test sessions on the TWAMP-Control channel have been stopped, and the REFWAIT (timeout following test session stop) has expired.

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-packets-transmitted number
Description Total number of TWAMP-Test packets sent relevant to the context
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number statistics test-packets-transmitted number
Treetest-packets-transmitted
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-sessions-completed number
Description Total number of completed TWAMP-Test sessions relative to the context
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number statistics test-sessions-completed number
Treetest-sessions-completed
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-sessions-rejected number
Description Total number of rejected TWAMP-Test sessions relative to the context
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number statistics test-sessions-rejected number
Treetest-sessions-rejected
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
control-packet-dscp (number | keyword)
Description The DSCP to be placed in the IP header of TWAMP-Control (TCP) packets generated by the Server
Contextoam twamp server network-instance name reference control-packet-dscp (number | keyword)
Treecontrol-packet-dscp
Range0 to 63
DefaultCS7
Options
  • CS0

  • LE

  • CS1

  • AF11

  • AF12

  • AF13

  • CS2

  • AF21

  • AF22

  • AF23

  • CS3

  • AF31

  • AF32

  • AF33

  • CS4

  • AF41

  • AF42

  • AF43

  • CS5

  • EF

  • CS6

  • CS7

ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
description string
Description TWAMP Server common configuration
Context oam twamp server network-instance name reference description string
Treedescription
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
enforce-test-session-start-time boolean
Description

Discard or process TWAMP-Test packets arriving before the negotiated session start time

A Request-TW-Session includes a start-time value for the test session. A value 'true' enforces the server check that will drop the TWAMP-Test packets if the test session start-time is before the Server time of day. In environments where the TWAMP Client and TWAMP Servers are not synchronized the value 'false' can be used to skip this validation check and process TWAMP test packets that arrive before their indicated start time.

Contextoam twamp server network-instance name reference enforce-test-session-start-time boolean
Treeenforce-test-session-start-time
Defaulttrue
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum-connections number
Description The system wide maximum number of concurrent TWAMP-Control connections the Server supports
Contextoam twamp server network-instance name reference maximum-connections number
Treemaximum-connections
Range1 to 64
Default32
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
maximum-sessions number
Description The system wide maximum number of concurrent TWAMP-Test sessions the Server supports
Contextoam twamp server network-instance name reference maximum-sessions number
Treemaximum-sessions
Range1 to 128
Default32
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
modes keyword
Description The list of TWAMP Modes this Server supports
Contextoam twamp server network-instance name reference modes keyword
Treemodes
Options
  • unauthenticated

    No encryption or authentication is applied in TWAMP-Control and TWAMP-Test

  • authenticated

    Control-Client and Server pass a shared secret for authentication

  • encrypted

    Additional level of protection using encryption

  • unauth-test-encrypt-control

    Mixed Security Mode, the TWAMP-Test uses unauthenticated mode and TWAMP-Control uses encrypted mode

  • individual-session-control

    Individual TWAMP-Test sessions start and stop using individual session identifiers

    This allows TWAMP-Test sessions using the same control channel to be started individually instead of using the bulk all sessions start.

  • reflect-octets

    Reflect octets capability

  • symmetrical-size

    Symmetrical size for test packets between Session-Sender and Session-Reflector

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
oper-state keyword
Description The operational state of the TWAMP Server and Session/Reflector
Contextoam twamp server network-instance name reference oper-state keyword
Treeoper-state
Options
  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
servwait number
Description

TWAMP-Control (TCP) session timeout, in seconds

The length of time the Server maintains the TWAMP-Control channel in the absence of any activity for the channel. This state is entered when there is no TWAMP-Control messages between the Control-Client and Server, and all test sessions on the TWAMP-Control channel have been stopped, and the timeout following test session stop (REFWAIT) has expired.

Contextoam twamp server network-instance name reference servwait number
Treeservwait
Range60 to 3600
Default900
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
session-reflector
Description Configuration and state for the TWAMP Session-Reflector
Contextoam twamp server network-instance name reference session-reflector
Treesession-reflector
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
Description TWAMP Session-Reflector test sessions.
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
Treetest-session
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reflector-ip (ipv4-address | ipv6-address)
Description The IP address of the TWAMP Session-Reflector, the destination IP address used in the TWAMP test packets belonging to this test
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
reflector-udp-port number
Description The UDP port number the TWAMP Session-Reflector listens on for TWAMP test packets belonging to this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
Range862 | 49152 to 65535
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-sequence-number-received number
Description The last sequence number in the TWAMP-Test packet sent by the Session-Sender to the Session-Reflector for this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number last-sequence-number-received number
Treelast-sequence-number-received
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
last-sequence-number-transmitted number
Description The last sequence number in the TWAMP-Test packet sent by the Session-Reflector to the Session-Sender for this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number last-sequence-number-transmitted number
Treelast-sequence-number-transmitted
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
parent-connection-client-ip (ipv4-address | ipv6-address)
Description The IP address of the Control-Client used in the TWAMP-Control (TCP) packets belonging to this control connection which negotiated the test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-client-ip (ipv4-address | ipv6-address)
Treeparent-connection-client-ip
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
parent-connection-client-tcp-port number
Description The TCP port of the Control-Client used in the TWAMP-Control (TCP) packets belonging to this control connection which negotiated the test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-client-tcp-port number
Treeparent-connection-client-tcp-port
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
parent-connection-server-ip (ipv4-address | ipv6-address)
Description The destination IP address in the TWAMP Control message sent by the Control-Client targeting the Server which negotiated this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-server-ip (ipv4-address | ipv6-address)
Treeparent-connection-server-ip
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
parent-connection-server-tcp-port number
Description The destination TCP Port (862) in the TWAMP Control message sent by the Control-Client targeting the server which negotiated this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-server-tcp-port number
Treeparent-connection-server-tcp-port
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-packets-received number
Description Total number of TWAMP-Test packets received relevant to the context
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number statistics test-packets-received number
Treetest-packets-received
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-packets-transmitted number
Description Total number of TWAMP-Test packets sent relevant to the context
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number statistics test-packets-transmitted number
Treetest-packets-transmitted
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-packet-dscp number
Description The DSCP value present in the IP header of TWAMP-Test packets belonging to this session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number test-packet-dscp number
Treetest-packet-dscp
Range0 to 63
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
test-session-id string
Description

A TWAMP sever auto-allocated identifier for this TWAMP-Test session that is unique to the local Server

This value is communicated to the Control-Client requesting the test session using the SID field of the Accept-Session message.

Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number test-session-id string
Treetest-session-id
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S

statistics

Description Enter the statistics context
Context oam twamp statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dropped-connection-states
Description The state of the TWAMP-Control channel when the failure occured
Contextoam twamp statistics dropped-connection-states
Treedropped-connection-states
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
active number
Description Count of TWAMP-Control connection failures in test active state
Contextoam twamp statistics dropped-connection-states active number
Treeactive
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
idle number
Description Count of TWAMP-Control connection failures in idle state
Contextoam twamp statistics dropped-connection-states idle number
Treeidle
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
started number
Description Count of TWAMP-Control connection failures in server-started state
Contextoam twamp statistics dropped-connection-states started number
Treestarted
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dropped-connections
Description TWAMP-Control (TCP) dropped or closed connections
Contextoam twamp statistics dropped-connections
Treedropped-connections
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
dropped-test-packet
Description TWAMP-Test packet drop stats
Context oam twamp statistics dropped-test-packet
Treedropped-test-packet
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
arrived-before-start-time number
Description

Test packets dropped because they arrived before start time

The TWAMP-Test packets arrived on the Session-Reflector before the indicated start-time in the Request-TW-Session. This is likely caused by a difference in Time of Day (ToD) clocks used for timestaming the TWAMP-Test packet. This may occur when the Server/Session-Reflector clock is ahead of the ToD clock of the Control-Client/Session-Sender.

Contextoam twamp statistics dropped-test-packet arrived-before-start-time number
Treearrived-before-start-time
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
no-start-sessions number
Description Test packets dropped because they arrived before Client-Control start-sessions message for the session
Contextoam twamp statistics dropped-test-packet no-start-sessions number
Treeno-start-sessions
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
rejected-session
Description Per reason code error statistics for test session rejection
Contextoam twamp statistics rejected-session
Treerejected-session
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
bad-type-p number
Description Sessions rejected because of non-DSCP type-p
Contextoam twamp statistics rejected-session bad-type-p number
Treebad-type-p
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S
refwait-timeout number
Description Sessions dropped because Session-Reflector inactivity timer (REFWAIT) elapsed
Contextoam twamp statistics rejected-session refwait-timeout number
Treerefwait-timeout
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X1b, 7250 IXR-X3b, 7730 SXR-1d-32D, 7730 SXR-1x-44S