Operate and maintain
Documents under this category provide background concepts and procedures for configuring, operating, and maintaining SR Linux software.
- ACL and Policy-based Routing Guide
  This document describes ACL and policy-based routing configuration for the Nokia Service Router Linux (SR Linux).
- Advanced Solutions Guide
  This document describes how to configure advanced solutions for the Nokia Service Router Linux (SR Linux). Advanced solutions are defined as more complex network-level configurations where additional guidance and more detailed procedures may be required.
- CLI Plug-in Guide
  This document describes how to create custom CLI plug-ins, and defines the classes and utility functions used to create them. It also defines how to install, modify, and remove a CLI plug-in.
- Configuration Basics
  This document describes basic configuration for the Nokia Service Router Linux (SR Linux). Examples of commonly used commands are provided.
- gRIBI Guide
  This guide describes configuration details for the gRPC Routing Information Base Interface (gRIBI) feature set used with the Nokia Service Router Linux (SR Linux).
- Interfaces Guide
  This document describes interface configuration for the Nokia Service Router Linux (SR Linux), including subinterfaces, IRB interfaces, LAGs, DHCP relay, and IPv6 router advertisements.
- MPLS Guide
  This guide describes the services and provides configuration examples for the Multiprotocol Label Switching (MPLS) protocol used with the Nokia Service Router Linux (SR Linux).
- Multicast Routing Protocols Guide
  This guide provides an overview of multicast routing concepts and provides configuration examples for Internet Group Management Protocol (IGMP), Multicast Listener Discovery (MLD), and Protocol Independent Multicast (PIM).
- Network Synchronization Guide
  This guide describes the network synchronization features for the Nokia Service Router Linux (SR Linux).
- P4Runtime Guide
  This document describes SR Linux support for P4Runtime and includes procedures for configuring SR Linux to operate with P4Runtime clients.
- Quality of Service Guide for 7220 IXR and 7250 IXR
  This document describes configuration details for the Quality of Service (QoS) feature set used with the Nokia Service Router Linux (SR Linux) on IXR-series platforms.
- Quality of Service Guide for 7730 SXR
  This document describes configuration details for the Quality of Service (QoS) feature set used with the Nokia Service Router Linux (SR Linux) on SXR-series platforms.
- Routing Protocols Guide
  This document describes routing protocol configuration for the Nokia Service Router Linux (SR Linux), including OSPF, IS-IS, and BGP.
- Segment Routing Guide
  This document describes configuration details for the Segment Routing feature set used with the Nokia Service Router Linux (SR Linux).
- System Management Guide
  This document describes the interfaces used with the Nokia Service Router Linux (SR Linux).
- VPN Services Guide
  This document describes basic configuration for Layer 2 and Layer 3 Virtual Private Network service functionality on the Nokia Service Router Linux (SR Linux). It presents examples to configure and implement various protocols and services.

LSP ping and trace for segment routing tunnels

To check connectivity and trace the path to any midpoint or endpoint of an SR-ISIS shortest path tunnel, SR Linux supports the following OAM commands:

tools oam lsp-ping sr-isis prefix-sid <prefix>
tools oam lsp-trace sr-isis prefix-sid <prefix>

Supported parameters include destination-ip, source-ip, timeout, ecmp-next-hop-select, igp-instance, and traffic-class. However, the only mandatory parameter is the prefix-sid.

Results from the lsp-ping and lsp-trace operations are displayed using info from state commands.

In the case of ECMP, even when the destination IP is configured, the SR Linux node may not exercise all NHLFEs.

For more information, see the SR Linux OAM and Diagnostics Guide.

November 7, 2024