tools platform
platform
+ chassis
+ reboot
+ force
+ warm
+ force
+ validate
+ control slot string
+ locator
+ disable
+ enable
+ duration number
+ reboot
+ force
+ fabric slot number
+ locator
+ disable
+ enable
+ duration number
+ reboot
+ fan-tray id number
+ locator
+ disable
+ enable
+ duration number
+ linecard slot number
+ locator
+ disable
+ enable
+ duration number
+ reboot
+ redundancy
+ switchover
+ synchronize
+ overlay
+ system
+ show-fabric-bandwidth
platform Descriptions
platform
chassis
reboot
force
warm
|
Note: This command is available for the following platforms:
| ||
| Description | Perform a warm reboot of the system This option will perform checks against the current configuration, before prompting to confirm the reboot, and then rebooting the system without impacting the datapath - if a new image has been configured, this will upgrade the system. | |
| Context | platform chassis reboot warm | |
| Tree | warm | |
| Configurable | True | |
force
|
Note: This command is available for the following platforms:
| ||
| Description | Force a warm reboot of the system, overriding any validation, synchronizations or other activities in progress This option can be dangerous, and may result in an outage - but can be used to support a fast reboot of the system. | |
| Context | platform chassis reboot warm force | |
| Tree | force | |
| Configurable | True | |
validate
control slot string
slot string
locator
disable
enable
duration number
reboot
force
|
Note: This command is available for the following platforms:
| ||
| Description | Force a reboot of the control module, overriding any synchronizations or other activies in progress This option can be dangerous, and may result in a standby module booting on an older image if used after an image change | |
| Context | platform control slot string reboot force | |
| Tree | force | |
| Configurable | True | |
fabric slot number
slot number
locator
disable
enable
duration number
|
Note: This command is available for the following platforms:
| ||
| Description | Sets the duration to activate the locator LED, after which it will disable automatically | |
| Context | platform fabric slot number locator enable duration number | |
| Tree | duration | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Configurable | True | |
reboot
fan-tray id number
id number
locator
disable
enable
duration number
linecard slot number
slot number
locator
disable
enable
duration number
|
Note: This command is available for the following platforms:
| ||
| Description | Sets the duration to activate the locator LED, after which it will disable automatically | |
| Context | platform linecard slot number locator enable duration number | |
| Tree | duration | |
| Range | 10 to 3600 | |
| Units | seconds | |
| Configurable | True | |
reboot
redundancy
|
Note: This command is available for the following platforms:
| ||
| Description | Top-level container for redundancy operational commands | |
| Context | platform redundancy | |
| Tree | redundancy | |
| Configurable | True | |
switchover
|
Note: This command is available for the following platforms:
| ||
| Description | Trigger a redundancy switchover to the other control module | |
| Context | platform redundancy switchover | |
| Tree | switchover | |
| Configurable | True | |
synchronize
|
Note: This command is available for the following platforms:
| ||
| Description | Top-level container for manual synchronization activies | |
| Context | platform redundancy synchronize | |
| Tree | synchronize | |
| Configurable | True | |
overlay
|
Note: This command is available for the following platforms:
| ||
| Description | Force a synchronization of the overlay filesystem between the active control module and the standby This synchronizes all non-excluded directories in the overlay filesystem | |
| Context | platform redundancy synchronize overlay | |
| Tree | overlay | |
| Configurable | True | |
system
|
Note: This command is available for the following platforms:
| ||
| Description | Force a synchronization of the system-required data between the active control module and the standby This synchronizes images, configuration, checkpoints, and other system-required data | |
| Context | platform redundancy synchronize system | |
| Tree | system | |
| Configurable | True | |
show-fabric-bandwidth
|
Note: This command is available for the following platforms:
| ||
| Description | Show fabric bandwidth | |
| Context | platform show-fabric-bandwidth | |
| Tree | show-fabric-bandwidth | |
| Configurable | True | |