| Lucent CM system installation data sheets | |||
|
| GO | |
|
This topic provides data sheets that lists all information that must be available to install a Lucent CM system.
Information from the data sheets must be entered during the installation procedure.
Important! All host names are fully qualified host names unless otherwise stated.
You can print out this page and when you collect the installation information, use the Value column to fill out the values you are going to use during installation.
This data sheet lists the information that is needed per system:
|
System level information |
Value |
|
Time Zone |
|
|
System ID for the Lucent CM System |
|
|
Number of nodes in the Lucent CM system |
|
|
Virtual Host name of the Lucent CM system |
|
|
VIP for the Lucent CM system To be provisioned in DNS |
|
|
Primary NTP Host name Primary NTP IP Address |
|
|
Secondary NTP Host name (optional) Secondary NTP IP Address (optional) |
|
|
Primary DNS Address |
|
|
Secondary DNS Address (optional) |
|
|
Tertiary DNS Address (optional) |
|
|
SNMP Host name (up to 3) SNMP Port Number (up to 3) |
|
|
Lucent CM Administrator user ID |
|
|
Lucent CM Administrator password |
|
|
DB tie-breaker |
This data sheet lists the information that is needed for each node:
|
Node information |
Value |
|
Node Type (Database, load balancer or Lucent CM application |
|
|
Node name |
|
|
Node root password |
|
|
Node Internal host name Node IP Address |
|
|
Node External host name Node IP Address |
|
|
Node Internal Subnet Mask |
|
|
Node External Subnet Mask |
|
|
Node Internal Gateway IP Address |
|
|
Node External Gateway IP Address |
|
|
Node passphrase (optional)1 |
| 1 | Passphrase for accessing the SSH keystore for Lucent CM users. |
|
|
GO | |
|
| © Lucent Technologies | |||