Install Lucent CM hardware and cabling

Install Lucent CM hardware and cabling
		GO

Purpose

This topic provides a reference to installation, cabling, and power up procedures of the Lucent CM server and disks.

Sun Fire^TM X2100 M2 documentation

Procedure 1	Refer to
Hardware installation	Sun Fire^TM X2100 M2 Server Service Manual
Cabling
Power up
Power down
HDD installation

Notes:

1	Some procedures are also available in other X2100 M2 guides.

Sun Fire^TM X2100 documentation

Procedure 1	Refer to
Hardware installation	Sun Fire^TM X2100 Server Getting Started Guide
Cabling
Power up
Power down
HDD installation	Sun Fire^TM X2100 Server User Guide

Notes:

1	Some procedures are also available in other X2100 guides.

Sun Fire^TM V20z documentation

Procedure 1	Refer to
Hardware installation	Sun Fire^TM V20z and Sun Fire^TM V40z Servers Installation Guide
Cabling
Power up
Power down	Sun Fire^TM V20z and Sun Fire^TM V40z Servers User Guide

Notes:

1	Some procedures are also available in other V20z guides.

Lucent CM server installation

Perform the following steps to install hardware and cabling of the Lucent CM server:

1	Install the hardware of the Lucent CM server. Reference: Refer to the server hardware documentation.
2	For Lucent CM systems with X2100s M2s or X2100s and with more than four database segments, install an additional Hard Disk Drive (HDD) in a D-node server. Reference: Refer to the server hardware documentation.
3	Cable the Lucent CM server. Reference: Refer to the server hardware documentation.
4	Power up the Lucent CM server. Reference: Refer to the server hardware documentation. End of steps

		GO
© Lucent Technologies