Important!

The system will not delete an ASAP that is assigned to an entity.

From the System View menu, select Reports → Alarm Severity Assignment Profile User List.

Result:

The View Alarm Severity Profile User List window opens.

Select the required ASAP to be deleted and click ASAP User List.

Result:

The ASAP user list appears.

Using the ASAP user list, determine if the ASAP to be deleted is currently assigned to an entity (active). Record any entities that are listed.

If required, repeat Step 2 and Step 3 to view the user list for another ASAP. Otherwise, click Close.

If the ASAP to be deleted is currently assigned to an entity, assign another ASAP to the entity.

Reference:

Procedure 6-10: Assign alarm severity assignment profile

Select Configuration → Alarms → Alarm Severity Assignment Profile.

Result:

The Provision Alarm Severity Profile window opens.

Select the Delete ASAP Operation and the ASAP to be deleted from the list. Then click Delete at the bottom of the window.

Result:

The ASAP information appears.

Verify the ASAP information and click Apply.

Result:

A warning appears asking you to confirm executing this command. Click Yes.

If required, repeat Step 7 and Step 8 to delete another ASAP. Otherwise, click Close.

Select View → View Alarms → View Alarm Severity Assignment Profile and verify that the ASAP was deleted.

End of steps