Procedure 5-110: Clear "time of day not provisioned" condition
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Complete the following steps to clear a time of day not provisioned condition:
1 |
Is the NTP server(s) unreachable condition in the alarm list ?
| ||||||
2 |
Using office records determine if Network Time Protocol is to be enabled at the network element.
| ||||||
3 |
From the System View, select Administration → Set Date and Time. Result: The Set Date and Time window opens. | ||||||
4 |
From the Date panel, select the Year and Month from the pulldown menus. Result: A calendar is displayed for the month and year selected. | ||||||
5 |
Click on the date from the calendar. | ||||||
6 |
From the Time panel, select the Hour, Minute, and Second from the pulldown menus (based upon a twelve hour clock). | ||||||
7 |
Select am or pm. | ||||||
8 |
Click OK. End of steps |