This Product Information and Planning Guide provides the following information for Alcatel-Lucent 1850 Transport Service Switch 5 (Alcatel-Lucent 1850 TSS-5):
This document, Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide, Issue 2, is issued to include information about the following features introduced in Release 7.2.2.
Forced Laser Shutdown feature allows the user to override normal laser operation and shut down the laser manually by enabling the feature on a per-port basis. Refer to Forced laser shutdown.
Updated T-MPLS description to include support for two rings. Refer to T-MPLS.
Synchronous Ethernet using VLNC55 and VLNC42B packs. Refer to Synchronization features.
Miscellaneous discretes supported on the VLNC42B. Refer to Miscellaneous discretes.
Internal and line Ethernet loopbacks on VLNC42B in T-MPLS mode and VLNC61/62/64 circuit packs. Refer to Loopbacks and tests.
Terminal and facility loopbacks on VLNC61/62/64 circuit packs. Refer to Loopbacks and tests.
Local access control on the VLNC42B in T-MPLS mode and VLNC6x packs. Refer to Local access control.
Global PM file collection is supported for the VLNC5x packs. Refer to Global PM file generation.
Software upgrades to 7.2.2. Refer to Available software.
Microsoft Windows® 7 support. Refer to Craft Interface Terminal (CIT).
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide, Issue 1, was issued to provide information about the following significant Release 7.2 features.
VLNC33 100 F 3-Port Optical Fast Ethernet Port Expander circuit pack that adds three optical Fast Ethernet ports to VLNC42B Ethernet Aggregator circuit packs.
SDH support on VLNC55 OC-3/12/48-STM-1/4/16-28DS1/E1-3DS3E3-1G SONET/SDH Transport circuit pack that provides the functionality of the VLNC52 OC-3/OC-12/STM-1/STM-4/28DS1E1/3DS3E3/1G SONET/SDH Transport circuit pack, OC-48/STM-16 interfaces.
OC-3/STM-1/OC-12/STM-4/OC-48/STM-16 multi-rate PTMs are supported on the VLNC55
SDH support on OC-48/STM-16 CWDM pluggable transmission modules.
Improved precision of 1-way loss measurement (LM) performance monitoring data support on VLNC40/42/42B Ethernet Aggregator circuit packs.
Y1731 1-way delay measurement (DM) performance monitoring support on VLNC42/42B Ethernet Aggregator circuit packs.
Transport Multiprotocol Label Switching (T-MPLS) enhanced functionality support on VLNC42B Ethernet Aggregator circuit pack.
Digital Diagnostic Monitoring (DDM) support on all pluggable transmission modules on VLNC33 packs.
SDH synchronization enhancements support on VLNC5x SONET/SDH Transport circuit packs.
Unframed (UF) signal format for E1 interfaces support on VLNC6x circuit packs.
C-VLAN push/pop feature allows a C-VLAN to be popped at ingress, and allows a C-VLAN to be pushed at egress. The C-VLAN is considered to be “service delimiting”. Rather than tunneling the C-VLAN, it is mapped to a selected pseudo-wire.
This guide is intended for network planners and engineers. However, anyone who needs specific information regarding the features, applications, operation, engineering, and ordering of Alcatel-Lucent 1850 TSS-5 would benefit from this document.
This document is not a cabinet-level end-product requirements document. Cabinet-level end-product requirements, like limits for cabinet electrical emissions, requirements for backup batteries, and similar cabinet-level site requirements must be determined and agreed to by the system supplier and customer.
This guide is divided into ten chapters and an appendix. Refer to the Contents section to locate specific information by chapter.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s expense.
Bold typeface signifies emphasis.
Italic typeface denotes a particular product line or information product.
Bold courier typeface signifies a TL1 command.
Bold typeface signifies a GUI command.
The following table lists the documents included in the Alcatel-Lucent 1850 TSS-5 documentation set.
|
Comcode |
Document Number |
Title |
|---|---|---|
|
NA |
365-372-330 |
WaveStar® CIT |
|
109 757 724 |
365-372-400R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide |
|
109 757 732 |
365-372-401R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) User Provisioning Guide |
|
109 757 740 |
365-372-402R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Maintenance and Trouble-Clearing Guide |
|
109 757 757 |
365-372-403R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Installation and System Turn-Up Guide |
|
109 757 765 |
365-372-404R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for MSPP |
|
109 757 773 |
365-372-405R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide |
|
109 757 781 |
365-372-406R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide |
|
109 757 799 |
365-372-407R7.2 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for T-MPLS |
|
NA |
ED8C956-10 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 3.0 - 7.2 Engineering and Ordering Information |
|
NA |
ED8C956-20 |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 3.0 - 7.2 Interconnect Information |
|
109 770 735 |
NA |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 7.2.X Customer Release Notes |
|
109 770 743 CD-ROM | ||
|
109 758 318 |
NA |
Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Release 7.2.X Customer Documentation (CD-ROM) |
For technical support, contact your local Alcatel-Lucent customer support team. See the Alcatel-Lucent Support web site for contact information.
To order Alcatel-Lucent documents, contact your local sales representative or use Online Customer Support (OLCS).
To comment on this document, go to the Online Comment Form or e-mail your comments to the Comments Hotline.
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |