Click WaveStar CIT to install the WaveStar^® CIT software.

Result:

Either the WaveStar CIT InstallShield or the WaveStar CIT maintenance installation screen appears.

Do you have a previous version of the WaveStar^® CIT installed on your computer?

When the following window opens, select Select to: Modify, Update, or Repair the current installation and then click Continue.

Select either

• Enable WaveStar CIT logins to require that users enter a user ID and password to login to the WaveStar^® CIT

  or

• Disable WaveStar CIT logins to allow users to run the WaveStar^® CIT without entering a user ID or password.

Click Next.

Select either

• Enable WaveStar CIT FTP Server

  or

• Disable WaveStar CIT FTP Server

Click Next.

If the WaveStar^® CIT FTP Server is disabled during installation, the FTP Server must be started manually from the Network View menu, Administration → FTP Administration.

Do you see the Reboot Required screen illustrated below?

When theInstallShield^® Wizard appears, click Next.

Follow the instructions on the different InstallShield^® Wizard windows, including reading and agreeing to the following two License Agreements.

Click Yes.

Click Yes.

Select where you want the WaveStar^® CIT software installed on your PC.

• Click Next to select the default Destination Folder: C:/Program Files/Alcatel-Lucent/. If you had a previous version of the WaveStar^® CIT installed, the installation path may be C:/Program Files/Lucent Technologies/.

  OR

• Click Browse and navigate to your desired directory and then click Next.

Select either

• Enable WaveStar CIT logins to require that users enter a user ID and password to login to the WaveStar^® CIT

  or

• Disable WaveStar CIT logins to allow users to run the WaveStar^® CIT without entering a user ID or password.

Click Next.

Select either

• Enable WaveStar CIT FTP Server

  or

• Disable WaveStar CIT FTP Server

Click Next.

If the WaveStar^® CIT FTP Server is disabled during installation, the FTP Server must be started manually from the Network View menu, Administration → FTP Administration.

Select the following components to complete the WaveStar^® CIT installation.

• Network View

• CutThrough View

• 1665/1850 Graphical Package installs the WaveStar^® CIT packages for Alcatel-Lucent 1665 DMX, Alcatel-Lucent 1665 DMXtend, Alcatel-Lucent 1665 DMXplore, Alcatel-Lucent 1850 TSS-5, and Alcatel-Lucent 1850 TSS-60.

  • 1665 On-Line Help Files

    If you do not wish to install online help for any of the Alcatel-Lucent 1665 products (Alcatel-Lucent 1665 DMX, Alcatel-Lucent 1665 DMXtend, Alcatel-Lucent 1665 DMXplore), you may uncheck the 1665 On-Line Help Files box.

    Alcatel-Lucent 1850 TSS-5 and Alcatel-Lucent 1850 TSS-60 do not include online help in this release.

Important!

The initial component selections that appear are based on the previous installation.

To save valuable disk space and reduce installation time, you can deselect graphical packages for all products that you do not plan to manage with this WaveStar^® CIT.

Space Required on “C”: indicates the space required to install you selected components. (If you specified an installation location other than Drive C, “C” may be a different drive.) If you had a previous version of the WaveStar^® CIT installed on your computer and you are not changing your selected components, the Space Required on “C”: is zero. In this situation, the components are already resident on the computer, therefore no additional space required when performing an upgrade. If any additional (new) packages are selected, the space required for those specific packages is displayed.

Click Next.

Result:

The following screen appears. Confirm your component selection Your list of selected components may be different than this screen.

Click Yes.

Result:

You are prompted with the choice to install OSI (Open System Interconnect) communications protocol.

If you wish to install OSI click Yes, otherwise, click No.

Result:

The following progress indicator screen appears while the InstallShield^® Wizard installs the required files.

If you wish to copy the NE software to your PC, select Yes on the following screen.

Did you select Yes or No in Step 16?

A Copying files, please wait window appears. When the window closes, the software files are successfully copied into the generics directory on your PC.

The default path of the NE software is C:/Program Files/Alcatel-Lucent/Wavestar CIT/generics/1850TSS-5/7.2.2/p.

The default path of the VLNC40/42/42B, VLNC60/61/62 and VLNC64 software is C:/Program Files/Alcatel-Lucent/Wavestar CIT/generics/1850TSS-5/7.2.2/p/cp_files.

If you had an older version of the WaveStar® CIT installed, the installation path may be C:/Program Files/Lucent Technologies/....

The actual directory is determined by the path defined in Step 9.

Result:

The 1850 TSS Family Software folder appears on your Desktop.

The 1850 TSS Family Software folder contains the short-cut icon for the software release to be installed. For example, the following figure shows the 1850TSS-5 7.2.2 icon. Your software release may be different, for example, 1850TSS-5 7.2.3.

In Step 15, did you elect to install OSI?

When the following screen appears, the installation without OSI is complete.

Click Finish.

Result:

The following icon appears on your desktop. Click this short-cut icon to launch the WaveStar^® CIT.

Proceed to Step 25.

When the following screen appears, the installation with OSI is complete.

Important!

Before using your new WaveStar^® CIT, you MUST reboot your computer.

Select Yes, I want to restart my computer now. and click Finish.

Result:

The following icon appears on your desktop. After you restart your PC, click this short-cut icon to launch the WaveStar^® CIT.

Important!

The InstallShield^® Wizard may create temporary folders/files in the PC system Temp folder. Temporary folders/files stored in the PC system Temp folder decrease available disk free space and may affect system performance.

If desired, close all open applications running on the PC and delete the appropriate temporary folders/files from the system Temp folder.

The Temp folder is defined by the TEMP system variable. It can be on any hard drive, but is usually defined as c:/Temp.

Windows 2000 and Windows XP operating systems provide a Disk Cleanup Wizard that can be used to remove temporary folders/files. To use the Disk Cleanup Wizard select Start → Programs → Accessories → System Tools → Disk Cleanup.

End of steps