Use these procedures to configure and/or display the following System → Configuration parameters:
Service Mode
System description
Network interface
Network Port (Network Connectivity)
Service Port
HTTP configuration
Telnet
Serial port (RS232 console) access
User Accounts, logins and authentication
Perform the following procedures as required.
Procedure 5-4.1: System description, configuration and display.
Procedure 5-4.2: Set the service mode of the VLNC42B.
Procedure 5-4.3: Enable/Disable 802.3x switch flow control
Procedure 5-4.4: Service port configuration
Procedure 5-4.5: Network port in-band connectivity
Procedure 5-4.6: HTTP configuration (enable/disable Web GUI interface )
Procedure 5-4.7: Telnet session configuration
Procedure 5-4.8: Outbound Telnet client configuration
Procedure 5-4.9: Serial (Console) port configuration
Procedure 5-4.10: User accounts, logins, and authentication
End of steps