VPLS site management procedures
To configure a GNE site on a VPLS service
To configure MFIB, STP, FIB, and MAC learning protection for a VPLS site
To configure SHCV for a VPLS site
To configure a default gateway for a VPLS site
To configure ingress multicast forwarding on a VPLS site
To configure a provider tunnel for a VPLS site
To configure service tunnel required bandwidth for a VPLS site
To configure IGMP snooping on a VPLS site
To configure PIM snooping on a VPLS site
To create an endpoint for redundancy (dual homing) on a VPLS site
To configure an SHG on a VPLS site
To configure an EVPN gateway on a VPLS site
To configure proxy ARP for a VPLS site
To configure proxy node discovery for a VPLS site
To configure MVR for a VPLS site
To configure a GSMP group on a VPLS site
To configure L2 management interfaces on a VPLS site
To configure MLD snooping on a VPLS site
To create a Virtual MEP on a VPLS site
To configure MVR for MLD on a VPLS site
To configure IGMP host tracking on a VPLS site
To configure WLAN GW L2 wholesale forwarding on a VPLS site
To configure a non-system IP address VXLAN termination
To configure EVPN on a VPLS site
To configure segment routing v6 on a VPLS site
To configure PBB-EVPN on a VPLS site
To configure a black hole MAC address on a VPLS site
To enable SPB on a control B-VPLS site
To enable SPB on a user B-VPLS site
To view the last cleared BFD statistics and sessions on a VPLS site
To enable the automatic selection of an RD on a VPLS site