Workflow to configure L2TP
Stages
1 |
Configure L2TP on a routing instance; see To configure L2TP on a routing instance . |
2 |
Update tunnel instance endpoints on an L2TP site as required; see To update tunnel instance endpoints on an L2TP site . |
3 |
Create and configure an LNS group and group member for an LNS site. If the site is an LAC, this configuration is not required; see To configure an ISA-LNS group . |
4 |
Configure the ESM profiles for LNS L2TP termination of the following as required:
|
5 |
Configure L2TP on each local user database PPPoE host to be forwarded to the LNS (applicable for the LAC and the LNS, where RADIUS is not used) as required; see To configure a local user database for subscriber host authentication . |
6 |
View the following L2TP related objects, as required:
|