To configure a Multicast CAC interface policy for IPv4/IPv6

Steps
 

Choose Policies→Multicast→Multicast CAC Interface from the NFM-P main menu. The Multicast CAC Interface Policies form opens.

Note: Multicast CAC Interface policies are not supported on VSR or 7705 SAR-Hm chassis types.


Click Create or choose a policy and click Properties. The Multicast CAC Interface, Global Policy (Create|Edit) form opens.


Configure the required parameters.


Save the policy and close the form.


Click Distribute to manually release and distribute the policy locally to devices. See To release and distribute a policy for additional information. Policies are also automatically distributed to devices when they are used by resources on the device.


As required, create the supported object type for this policy type and associate the policy to the object by clicking the Select button. Save your changes and close the form.

Supported object type

Base configuration procedure to create the supported object

Policy location on each object type

VPLS SAP

To create a VPLS or MVPLS L2 access interface

Click on the IGMP Snooping tab, then the General sub-tab.

VPLS Spoke SDP

MVPL Spoke SDP

To create a VPLS or MVPLS spoke SDP binding

Click on the IGMP Snooping tab, then the General sub-tab.

IGMP Interface on a base router and VPRN service

To add an IGMP interface to an IES

Click on the Multicast CAC tab, then the General sub-tab.

MLD Interface on a base router and VPRN service

To configure an MLD interface on a base routing instance or VPRN routing instance

Click on the Multicast CAC tab, then the General sub-tab.

PIM Interface on a base router and VPRN service

To create a PIM interface on a base routing instance or VPRN routing instance

Click on the Multicast CAC tab, then the General sub-tab.

IGMP Group Interface on IES and VPRN services

To add an IGMP group interface to a VPRN

For VPRNs, click on the Multicast CAC tab, then the General sub-tab.

For IES service sites, click on the Multicast tab, then the IGMP Group Interfaces sub-tab or MLD Group Interface sub-tab.

MLD Group Interface on IES and VPRN services

To configure an MLD group interface on a base routing instance or VPRN routing instance

Click on the Multicast CAC tab, then the General sub-tab.

MSAP policy

To configure an MSAP policy

Click on the VPLS Configuration tab, then on the ICMP Snooping sub-tab.

End of steps