Workflow to configure policer control hierarchy

Requirements

This workflow assumes that the following components already exist:

Stages
 

Configure arbiters in a policer control policy. See To configure a policer control policy for more information.

  1. Create arbiters.

  2. Configure parent/child relationships between arbiters to build a policer control hierarchy.


Configure a policer in a SAP access ingress or access egress policy. See To configure a SAP access ingress policy and To configure a 7210, 7250, and 1830 SAP Access Ingress policy for more information.

  1. Create a policer to configure traffic control parameters.

  2. Assign a parent arbiter to the policer to associate it with the hierarchy configured in the policer control policy.


Assign the policer control policy to a subscriber that is configured with a SAP access ingress or access egress policy that includes a policer. See To configure a subscriber profile for more information.


As required, assign the policer control policy to an access interface or SAP that is configured with a SAP access ingress or access egress policy that includes a policer.

  1. For an IES L3 access interface, see To configure an L3 access interface on an IES site for more information.

  2. For an IES SAP, see To configure a group interface on an IES for more information.

  3. For a VPLS L2 access interface, see To create a VPLS or MVPLS L2 access interface for more information.

  4. For a VPLS B-L2 access interface, see To create a VPLS or MVPLS B-L2 access interface for more information.

  5. For a VPLS I-L2 access interface, see To create a VPLS I-L2 access interface for more information.

  6. For a VPRN L3 access interface, see To configure an L3 access interface on a VPRN site for more information.

  7. For a VPRN SAP, see To configure a group interface on a VPRN for more information.